Rafael J. Wysocki [Wed, 11 Jul 2012 21:07:05 +0000 (23:07 +0200)]
Merge branch 'renesas-ap4evb' into renesas-board
* renesas-ap4evb:
ARM: mach-shmobile: add fixed voltage regulators to ap4evb
ARM: shmobile: use common extra gpio functions on ap4evb
Rafael J. Wysocki [Wed, 11 Jul 2012 21:06:57 +0000 (23:06 +0200)]
Merge branch 'renesas-ag5evm' into renesas-board
* renesas-ag5evm:
ARM: mach-shmobile: add fixed voltage regulators to ag5evm
Rafael J. Wysocki [Wed, 11 Jul 2012 21:06:35 +0000 (23:06 +0200)]
Merge branch 'renesas-armadillo' into renesas-board
* renesas-armadillo:
ARM: mach-shmobile: armadillo800eva: defconfig Allow use of armhf userspace
ARM: shmobile: armadillo800eva: A3SP domain includes USB
ARM: shmobile: armadillo800eva: A4LC domain includes LCDC
ARM: shmobile: armadillo800eva: USB Func enables external IRQ mode
ARM: mach-shmobile: add fixed voltage regulators to armadillo800eva
ARM: shmobile: use common extra gpio functions on armadillo800eva
ARM: shmobile: armadillo800eva: enable DMAEngine on USB
ARM: shmobile: armadillo800eva: enable DMAEngine on SDHI
ARM: shmobile: armadillo800eva: enable DMAEngine on FSI
ARM: shmobile: armadillo800eva: enable FSI-HDMI sound
ARM: shmobile: armadillo800eva: enable FSI-WM8978 sound
Conflicts:
arch/arm/mach-shmobile/Kconfig
Rafael J. Wysocki [Wed, 11 Jul 2012 21:05:06 +0000 (23:05 +0200)]
Merge branch 'renesas-board-common' into renesas-board
* renesas-board-common:
ARM: mach-shmobile: select the fixed regulator driver on several boards
regulator: extend the fixed dummy voltage regulator to accept voltage
regulator: support multiple dummy fixed regulators
Conflicts:
arch/arm/mach-shmobile/Kconfig
Rafael J. Wysocki [Wed, 11 Jul 2012 21:03:54 +0000 (23:03 +0200)]
Merge branch 'renesas-soc' into renesas-board
* renesas-soc: (31 commits)
ARM: shmobile: Fix build problem in pm-sh7372.c for unusual .config
ARM: shmobile: Take cpuidle dependencies into account correctly
ARM: mach-shmobile: sh7377 generic board support via DT
ARM: mach-shmobile: r8a7740 generic board support via DT
ARM: shmobile: sh7372: completely switch over to using pm-rmobile API
ARM: shmobile: ap4evb: switch to using pm-rmobile API
ARM: shmobile: mackerel: switch to using pm-rmobile API
ARM: shmobile: sh7372: add pm-rmobile domain support
ARM: shmobile: r8a7740: add A4LC pm domain support
ARM: shmobile: r8a7740: add A3SP pm domain support
ARM: shmobile: r8a7740: add A4S pm domain support
ARM: shmobile: r8a7740: fixup: MSEL1CR 7bit control
ARM: shmobile: soc-core: add R-mobile PM domain common APIs
ARM: shmobile: sh7372 A3SM CPUIdle support
ARM: shmobile: Use INTCA with sh7372 A3SM power domain
ARM: mach-shmobile: Convert sh_clk_mstp32_register to sh_clk_mstp_register
ARM: shmobile: use common DMAEngine definitions on sh7372
ARM: shmobile: use common DMAEngine definitions on sh73a0
ARM: shmobile: sh73a0: add DMAEngine support for MPDMAC
ARM: shmobile: sh73a0: add USB clock support
...
Rafael J. Wysocki [Wed, 11 Jul 2012 21:02:37 +0000 (23:02 +0200)]
Merge branch 'renesas-sh7377' into renesas-soc
* renesas-sh7377:
ARM: mach-shmobile: sh7377 generic board support via DT
Rafael J. Wysocki [Wed, 11 Jul 2012 21:02:31 +0000 (23:02 +0200)]
Merge branch 'renesas-sh7372' into renesas-soc
* renesas-sh7372:
ARM: shmobile: Fix build problem in pm-sh7372.c for unusual .config
ARM: shmobile: Take cpuidle dependencies into account correctly
ARM: shmobile: sh7372: completely switch over to using pm-rmobile API
ARM: shmobile: ap4evb: switch to using pm-rmobile API
ARM: shmobile: mackerel: switch to using pm-rmobile API
ARM: shmobile: sh7372: add pm-rmobile domain support
ARM: shmobile: sh7372 A3SM CPUIdle support
ARM: shmobile: Use INTCA with sh7372 A3SM power domain
ARM: shmobile: use common DMAEngine definitions on sh7372
ARM: shmobile: sh7372: remove unused sh7372_a3sp_init() on !CONFIG_PM
Rafael J. Wysocki [Wed, 11 Jul 2012 21:02:18 +0000 (23:02 +0200)]
Merge branch 'renesas-sh73a0' into renesas-soc
* renesas-sh73a0:
ARM: shmobile: use common DMAEngine definitions on sh73a0
ARM: shmobile: sh73a0: add DMAEngine support for MPDMAC
ARM: shmobile: sh73a0: add USB clock support
Rafael J. Wysocki [Wed, 11 Jul 2012 21:02:05 +0000 (23:02 +0200)]
Merge branch 'renesas-r8a7740' into renesas-soc
* renesas-r8a7740:
ARM: mach-shmobile: r8a7740 generic board support via DT
ARM: shmobile: r8a7740: add A4LC pm domain support
ARM: shmobile: r8a7740: add A3SP pm domain support
ARM: shmobile: r8a7740: add A4S pm domain support
ARM: shmobile: r8a7740: fixup: MSEL1CR 7bit control
ARM: shmobile: use common DMAEngine definitions on r8a7740
ARM: shmobile: r8a7740: add DMAEngine support for USB
ARM: shmobile: r8a7740: add DMAEngine support for SDHI
ARM: shmobile: r8a7740: add DMAEngine support for FSI
Rafael J. Wysocki [Wed, 11 Jul 2012 21:01:33 +0000 (23:01 +0200)]
Merge branch 'renesas-soc-core' into renesas-soc
* renesas-soc-core:
ARM: shmobile: soc-core: add R-mobile PM domain common APIs
ARM: mach-shmobile: Convert sh_clk_mstp32_register to sh_clk_mstp_register
ARM: shmobile: add common DMAEngine definitions
ARM: shmobile: add common extra gpio functions
Conflicts:
arch/arm/mach-shmobile/clock-r8a7740.c
Rafael J. Wysocki [Wed, 11 Jul 2012 21:00:18 +0000 (23:00 +0200)]
Merge branch 'renesas-fixes' into renesas-soc
* renesas-fixes:
ARM: shmobile: r8a7779: Route all interrupts to ARM
ARM: shmobile: kzm9d: use late init machine hook
ARM: shmobile: kzm9g: use late init machine hook
ARM: mach-shmobile: armadillo800eva: Use late init machine hook
Rafael J. Wysocki [Wed, 11 Jul 2012 20:55:12 +0000 (22:55 +0200)]
ARM: shmobile: Fix build problem in pm-sh7372.c for unusual .config
If neither CONFIG_SUSPEND nor CONFIG_CPU_IDLE is set in the kernel
configuration file, build error occurs in
arch/arm/mach-shmobile/pm-sh7372.c.
Fix it by rearranging #ifdefs in that file to make the
definition of sh7372_suspend_init() depend only on
CONFIG_SUSPEND and the definition of sh7372_cpuidle_init()
depend only on CONFIG_CPU_IDLE.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Magnus Damm <damm@opensource.se>
Magnus Damm [Wed, 11 Jul 2012 20:54:05 +0000 (22:54 +0200)]
ARM: shmobile: Take cpuidle dependencies into account correctly
The sh7372's cpuidle code uses cpu_suspend() and cpu_resume() in
its implementation of the .enter() callback for deeper C-states, so
make ARCH_SH7372 select ARM_CPU_SUSPEND if CPU_IDLE is set to satisfy
all of the build dependencies (it has to be selected for CONFIG_PM
as well for the system suspend handling).
[rjw: Added the subject and changelog.]
Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Simon Horman [Fri, 6 Jul 2012 11:08:15 +0000 (20:08 +0900)]
ARM: mach-shmobile: armadillo800eva: defconfig Allow use of armhf userspace
This allows use a Debian armhf usespace
as well as the existing ability to use a Debian armel userspace.
Signed-off-by: Simon Horman <horms@verge.net.au>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Magnus Damm [Fri, 6 Jul 2012 08:10:02 +0000 (17:10 +0900)]
ARM: mach-shmobile: sh7377 generic board support via DT
Add generic DT board support for the sh7377 SoC.
SCIF serial ports and timers are kept as regular
platform devices. Other on-chip and on-board devices
should be configured via the device tree.
At this point there is no interrupt controller support
in place but such code will be added over time when
proper IRQ domain support has been added to INTC.
Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Magnus Damm [Fri, 6 Jul 2012 08:08:07 +0000 (17:08 +0900)]
ARM: mach-shmobile: r8a7740 generic board support via DT
Add generic DT board support for the r8a7740 SoC.
SCIF serial ports and timers are kept as regular
platform devices. Other on-chip and on-board devices
should be configured via the device tree.
At this point there is no interrupt controller support
in place but such code will be added over time when
proper IRQ domain support has been added to INTC.
Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Kuninori Morimoto [Thu, 5 Jul 2012 08:29:37 +0000 (01:29 -0700)]
ARM: shmobile: sh7372: completely switch over to using pm-rmobile API
Now, all sh7372 platforms are switched over to use pm-rmobile base PM domain,
and no one is using original sh7372_pm_domain APIs.
We can remove these, switching has been fully completed.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Kuninori Morimoto [Thu, 5 Jul 2012 08:29:17 +0000 (01:29 -0700)]
ARM: shmobile: ap4evb: switch to using pm-rmobile API
This patch switches ap4evb platform to use pm-rmobile base common API.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Kuninori Morimoto [Thu, 5 Jul 2012 08:28:54 +0000 (01:28 -0700)]
ARM: shmobile: mackerel: switch to using pm-rmobile API
This patch switches mackerel platform to use pm-rmobile base common API.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Kuninori Morimoto [Thu, 5 Jul 2012 08:28:32 +0000 (01:28 -0700)]
ARM: shmobile: sh7372: add pm-rmobile domain support
This patch adds pm-rmobile common API base PM domain.
sh7372 CPU/platform will switch to using it from
original implementation
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Rafael J. Wysocki [Fri, 6 Jul 2012 18:43:44 +0000 (20:43 +0200)]
Merge branch 'renesas-soc-core' into renesas-sh7372
* renesas-soc-core:
ARM: shmobile: soc-core: add R-mobile PM domain common APIs
ARM: mach-shmobile: Convert sh_clk_mstp32_register to sh_clk_mstp_register
Kuninori Morimoto [Thu, 5 Jul 2012 08:28:00 +0000 (01:28 -0700)]
ARM: shmobile: armadillo800eva: A3SP domain includes USB
Because USB Func is controlled by external IRQ mode,
it is possible to control USB under A3SP domain to reduce power.
This patch enables it.
Armadillo800eva board switchs USB Host/Func by SW1.6,
So, the device to adds into domain is selected on this patch.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Kuninori Morimoto [Thu, 5 Jul 2012 08:27:37 +0000 (01:27 -0700)]
ARM: shmobile: armadillo800eva: A4LC domain includes LCDC
It is possible to control LCDC under A4LC domain to reduce power.
This patch enable it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Kuninori Morimoto [Thu, 5 Jul 2012 08:27:14 +0000 (01:27 -0700)]
ARM: shmobile: armadillo800eva: USB Func enables external IRQ mode
We can control renesas_usbhs driver as 2 way which are
autonomy mode and external IRQ trigger mode.
Autonomy mode is very easy settings for platform,
but it required USB power domain always ON,
since its connection/disconnection IRQ come from it.
If platform uses external IRQ trigger mode,
USB power domain can be OFF, since its
connection/disconnection IRQ come from external IRQ.
This patch enable external IRQ mode.
Now it is possible to add USB support on A4SP domain.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Rafael J. Wysocki [Fri, 6 Jul 2012 18:42:44 +0000 (20:42 +0200)]
Merge branch 'renesas-r8a7740' into renesas-armadillo
* renesas-r8a7740:
ARM: shmobile: r8a7740: add A4LC pm domain support
ARM: shmobile: r8a7740: add A3SP pm domain support
ARM: shmobile: r8a7740: add A4S pm domain support
ARM: shmobile: r8a7740: fixup: MSEL1CR 7bit control
ARM: shmobile: soc-core: add R-mobile PM domain common APIs
ARM: mach-shmobile: Convert sh_clk_mstp32_register to sh_clk_mstp_register
Kuninori Morimoto [Thu, 5 Jul 2012 08:26:53 +0000 (01:26 -0700)]
ARM: shmobile: r8a7740: add A4LC pm domain support
This patch adds basic A4LC pm domain support.
Now, below devices can be controled by PM
MERAM, LCDC, VOU, ICBS, SDENC-Link
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Kuninori Morimoto [Thu, 5 Jul 2012 08:26:31 +0000 (01:26 -0700)]
ARM: shmobile: r8a7740: add A3SP pm domain support
This patch adds basic A3SP pm domain support.
Now, below devices can be controled by PM
DMAC1/2/3, IPMMU, DDM, FLCTL, SYS-HPB, BBIF1, MSIOF1/2,
SCIFA,SCIFB, IIC1, IrDA, USBH, USBDMAC, SDHI0/1/2, TPU,
DREQPAK (Sys), MMCIF, RSPI, SIM, USBF
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Kuninori Morimoto [Thu, 5 Jul 2012 08:25:58 +0000 (01:25 -0700)]
ARM: shmobile: r8a7740: add A4S pm domain support
This patch adds basic A4S pm domain support.
Now, below devices can be controled by PM
Common-SHwy, Common-HPB, BSC, MFI, MMFROM, HS-SHwy,
SYS-HPB, INTCA, DBSC, DDRPHY (Logic),
ATAPI, GbEther, AXI-bus
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Kuninori Morimoto [Thu, 5 Jul 2012 08:25:24 +0000 (01:25 -0700)]
ARM: shmobile: r8a7740: fixup: MSEL1CR 7bit control
MSEL1CR 7bit selects IRQ7 source pin which was
VBUS pin or A21/MSIOF0_RSYNC/MSIOF1_TSYNC pin.
But current pfc-r8a7740 MSEL1CR 7bit setting was wrong.
This patch fix it up
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Rafael J. Wysocki [Fri, 6 Jul 2012 18:39:54 +0000 (20:39 +0200)]
Merge branch 'renesas-soc-core' into renesas-r8a7740
* renesas-soc-core:
ARM: shmobile: soc-core: add R-mobile PM domain common APIs
ARM: mach-shmobile: Convert sh_clk_mstp32_register to sh_clk_mstp_register
Conflicts:
arch/arm/mach-shmobile/clock-r8a7740.c
Kuninori Morimoto [Thu, 5 Jul 2012 08:24:46 +0000 (01:24 -0700)]
ARM: shmobile: soc-core: add R-mobile PM domain common APIs
This patch adds Renesas R-mobile series common PM domain APIs.
R-mobile CPU can use/switch this API
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Guennadi Liakhovetski [Thu, 5 Jul 2012 13:17:42 +0000 (15:17 +0200)]
ARM: mach-shmobile: select the fixed regulator driver on several boards
On systems, using regulators to supply power to devices, if the REGULATOR
Kconfig option is disabled, regulator API stubs will be used, which often
suffices to bring a default configuration up. If REGULATOR is enabled but
respective regulator drivers are inactive, the real regulator API calls
will be used, which in the absence of drivers will fail to provide
services. This patch prevents such a problem on sh-mobile boards by
forcing REGULATOR_FIXED_VOLTAGE on if REGULATOR is selected.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Magnus Damm [Thu, 5 Jul 2012 05:46:47 +0000 (14:46 +0900)]
ARM: shmobile: sh7372 A3SM CPUIdle support
Add CPUIdle support for the A3SM power domain on sh7372.
With this in place we can turn off more of the SoC during
run time and save power. Makes use of the recently introduced
sh7372 INTCA A3SM power domain wakeup support.
Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Magnus Damm [Thu, 5 Jul 2012 05:46:07 +0000 (14:46 +0900)]
ARM: shmobile: Use INTCA with sh7372 A3SM power domain
Convert the sh7372 A3SM power domain code to allow
waking up through INTCA and SYSC instead of only
relying on SYSC for wakeups. This allows us to
enter A3SM more or less regardless of the state
of the rest of the system.
Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Nobuhiro Iwamatsu [Wed, 27 Jun 2012 00:59:00 +0000 (09:59 +0900)]
ARM: mach-shmobile: Convert sh_clk_mstp32_register to sh_clk_mstp_register
sh_clk_mstp32_register is deprecated. This convert to sh_clk_mstp_register.
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Guennadi Liakhovetski [Fri, 29 Jun 2012 06:33:11 +0000 (08:33 +0200)]
ARM: mach-shmobile: add fixed voltage regulators to armadillo800eva
On armadillo800eva provide a 3.3V supply for its SD/MMC-card interfaces.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Rafael J. Wysocki [Sat, 30 Jun 2012 20:42:11 +0000 (22:42 +0200)]
Merge branch 'renesas-board-common' into renesas-armadillo
* renesas-board-common:
regulator: extend the fixed dummy voltage regulator to accept voltage
regulator: support multiple dummy fixed regulators
Guennadi Liakhovetski [Tue, 26 Jun 2012 22:32:25 +0000 (00:32 +0200)]
ARM: mach-shmobile: add fixed voltage regulators to ap4evb
On ap4evb provide 1.8V and 3.3V supplies for its SD/MMC-card interfaces
and a dummy regulator for the smsc911x driver.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Rafael J. Wysocki [Sat, 30 Jun 2012 20:40:25 +0000 (22:40 +0200)]
Merge branch 'renesas-board-common' into renesas-ap4evb
* renesas-board-common:
regulator: extend the fixed dummy voltage regulator to accept voltage
regulator: support multiple dummy fixed regulators
Guennadi Liakhovetski [Fri, 29 Jun 2012 07:32:29 +0000 (09:32 +0200)]
ARM: mach-shmobile: add fixed voltage regulators to ag5evm
On ag5evm provide 1.8V, 2.8V, and 3.3V supplies for its SD/MMC-card
interfaces and a dummy regulator for the smsc911x driver.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Rafael J. Wysocki [Sat, 30 Jun 2012 20:23:24 +0000 (22:23 +0200)]
Merge tag 'topic/fixed' of git://git./linux/kernel/git/broonie/regulator into renesas-board-common
Several following board changes depend on this branch.
Kuninori Morimoto [Mon, 25 Jun 2012 10:41:19 +0000 (03:41 -0700)]
ARM: shmobile: use common extra gpio functions on ap4evb
This patch switch over to use common extra gpio method,
and reduced a waste of code on SH-ARM.
But these functions should be replaced by correct
gpio function in the future.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Kuninori Morimoto [Mon, 25 Jun 2012 10:41:45 +0000 (03:41 -0700)]
ARM: shmobile: use common extra gpio functions on armadillo800eva
This patch switch over to use common extra gpio method,
and reduced a waste of code on SH-ARM.
But these functions should be replaced by correct
gpio function in the future.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Kuninori Morimoto [Mon, 25 Jun 2012 10:37:47 +0000 (03:37 -0700)]
ARM: shmobile: armadillo800eva: enable DMAEngine on USB
It is possible to reduce CPU load if USB used DMAEngine.
This patch enabled it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Kuninori Morimoto [Mon, 25 Jun 2012 10:37:38 +0000 (03:37 -0700)]
ARM: shmobile: armadillo800eva: enable DMAEngine on SDHI
It is possible to reduce CPU load if SDHI used DMAEngine.
This patch enabled it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Kuninori Morimoto [Mon, 25 Jun 2012 10:37:20 +0000 (03:37 -0700)]
ARM: shmobile: armadillo800eva: enable DMAEngine on FSI
It is possible to reduce CPU load if FSI playback used DMAEngine.
This patch enabled it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Kuninori Morimoto [Mon, 25 Jun 2012 10:33:04 +0000 (03:33 -0700)]
ARM: shmobile: armadillo800eva: enable FSI-HDMI sound
This patch enable HDMI sound support on CON3
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Kuninori Morimoto [Mon, 25 Jun 2012 10:32:50 +0000 (03:32 -0700)]
ARM: shmobile: armadillo800eva: enable FSI-WM8978 sound
This patch enable sound support on CON11
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Rafael J. Wysocki [Sat, 30 Jun 2012 13:24:35 +0000 (15:24 +0200)]
Merge branch 'renesas-r8a7740' into renesas-armadillo
* renesas-r8a7740:
ARM: shmobile: use common DMAEngine definitions on r8a7740
ARM: shmobile: r8a7740: add DMAEngine support for USB
ARM: shmobile: r8a7740: add DMAEngine support for SDHI
ARM: shmobile: r8a7740: add DMAEngine support for FSI
ARM: shmobile: add common DMAEngine definitions
ARM: shmobile: add common extra gpio functions
Kuninori Morimoto [Mon, 25 Jun 2012 10:43:19 +0000 (03:43 -0700)]
ARM: shmobile: use common DMAEngine definitions on sh7372
This patch switch over to use common DMAEngine definitions,
and reduced a waste of code.
It is easy to understand if sh_dmae_pdata / sh_dmae_slave_config
settings are used defined value instead of direct value.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Rafael J. Wysocki [Sat, 30 Jun 2012 13:16:35 +0000 (15:16 +0200)]
Merge branch 'renesas-soc-core' into renesas-sh7372
* renesas-soc-core:
ARM: shmobile: add common DMAEngine definitions
ARM: shmobile: add common extra gpio functions
Kuninori Morimoto [Mon, 25 Jun 2012 10:43:28 +0000 (03:43 -0700)]
ARM: shmobile: use common DMAEngine definitions on sh73a0
This patch switch over to use common DMAEngine definitions,
and reduced a waste of code.
It is easy to understand if sh_dmae_pdata / sh_dmae_slave_config
settings are used defined value instead of direct value.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Kuninori Morimoto [Mon, 25 Jun 2012 10:39:20 +0000 (03:39 -0700)]
ARM: shmobile: sh73a0: add DMAEngine support for MPDMAC
Current shdmac can support MPDMAC (= sound DMA) on sh73a0.
This support reduce CPU load when sound was playback.
On v2.0 manual, MPDMAC MID/RID number were wrong.
This patch is using the number which seems correct.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Kuninori Morimoto [Mon, 25 Jun 2012 10:34:49 +0000 (03:34 -0700)]
ARM: shmobile: sh73a0: add USB clock support
It is required from renesas_usbhs driver.
This patch is based on v2.0 manual.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Rafael J. Wysocki [Sat, 30 Jun 2012 13:13:34 +0000 (15:13 +0200)]
Merge branch 'renesas-soc-core' into renesas-sh73a0
* renesas-soc-core:
ARM: shmobile: add common DMAEngine definitions
ARM: shmobile: add common extra gpio functions
Kuninori Morimoto [Mon, 25 Jun 2012 10:43:10 +0000 (03:43 -0700)]
ARM: shmobile: use common DMAEngine definitions on r8a7740
This patch switch over to use common DMAEngine definitions,
and reduced a waste of code.
It is easy to understand if sh_dmae_pdata / sh_dmae_slave_config
settings are used defined value instead of direct value.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Kuninori Morimoto [Mon, 25 Jun 2012 10:37:10 +0000 (03:37 -0700)]
ARM: shmobile: r8a7740: add DMAEngine support for USB
Current shdmac can support USB DMAC on r8a7740.
This support reduce CPU duty when USB access.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Kuninori Morimoto [Mon, 25 Jun 2012 10:37:00 +0000 (03:37 -0700)]
ARM: shmobile: r8a7740: add DMAEngine support for SDHI
Current shdmac can support SDHI DMAC on r8a7740.
This support reduce CPU duty when SDHI access.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Kuninori Morimoto [Mon, 25 Jun 2012 10:36:49 +0000 (03:36 -0700)]
ARM: shmobile: r8a7740: add DMAEngine support for FSI
Current shdmac can support FSI DMAC on r8a7740.
This support reduce CPU duty when sound was playback.
This patch is based on v1.0 manual
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Rafael J. Wysocki [Sat, 30 Jun 2012 13:04:01 +0000 (15:04 +0200)]
Merge branch 'renesas-soc-core' into renesas-r8a7740
* renesas-soc-core:
ARM: shmobile: add common DMAEngine definitions
ARM: shmobile: add common extra gpio functions
Kuninori Morimoto [Mon, 25 Jun 2012 10:43:00 +0000 (03:43 -0700)]
ARM: shmobile: add common DMAEngine definitions
Current shmobile have DMAEngine specific settings on each CPU code,
but SH-ARM DMAC use same value.
This patch adds new dma-register.h header to share definitions
and reduce a waste of code on SH-ARM architecture.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Kuninori Morimoto [Mon, 25 Jun 2012 10:41:09 +0000 (03:41 -0700)]
ARM: shmobile: add common extra gpio functions
Current gpio frame work doesn't have the method to control
just pull up/down/free, but some SH-ARM boards need such kind of operation.
This patch adds common extra gpio functions for SH-ARM.
But these functions should be replaced by correct
gpio function in the future.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Kuninori Morimoto [Sun, 24 Jun 2012 20:00:13 +0000 (22:00 +0200)]
ARM: shmobile: sh7372: remove unused sh7372_a3sp_init() on !CONFIG_PM
767c0f3aed74be56f268709f5347e6c86d52b408
(PM / shmobile: Remove the stay_on flag from SH7372's PM domains)
commit removed sh7372_a3sp_init().
Now, there is no user for it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Phil Edworthy [Fri, 22 Jun 2012 23:12:09 +0000 (01:12 +0200)]
ARM: shmobile: r8a7779: Route all interrupts to ARM
Without this, the interrupts for I2C, VIN, GPIO, SDHC, HSCIF and
HPB-DMAC are sent to the SH processor.
Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Rafael J. Wysocki [Thu, 21 Jun 2012 10:05:52 +0000 (12:05 +0200)]
Merge branch 'renesas-kzm9g' into renesas-board
* renesas-kzm9g:
ARM: shmobile: kzm9g: Support Real Time Clock
ARM: shmobile: kzm9g: enable FSI-AK4648
ARM: shmobile: sh73a0: add FSI clock
Tetsuyuki Kobayashi [Wed, 20 Jun 2012 10:57:51 +0000 (12:57 +0200)]
ARM: shmobile: kzm9g: Support Real Time Clock
KZM-A9-GT board has RTC device r2025d at I2C channel 0
with slave address 0x64.
This patch enables reading and writing hardware real time clock on
KZM-A9-GT board. Interrupt is not yet supported.
How to test this patch using user space command.
Read RTC
# hwclock -r
Copy system clock to RTC
# hwclock -w
Shutdown and power off the board, and wait a while, then power on again.
Check RTC still keeps correct date.
Signed-off-by: Tetsuyuki Kobayashi <koba@kmckk.co.jp>
Tested-by: Simon Horman <horms@verge.net.au>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Kuninori Morimoto [Tue, 12 Jun 2012 09:40:07 +0000 (02:40 -0700)]
ARM: shmobile: armadillo800eva: enable camera
This patch enable camera support on CON1
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Simon Horman <horms@verge.net.au>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Kuninori Morimoto [Thu, 21 Jun 2012 05:41:34 +0000 (22:41 -0700)]
ARM: shmobile: kzm9d: use late init machine hook
Since commit
21cc1b7ede3cf456cf1d51f8a906093261f7c111 ("ARM: shmobile:
use machine specific hook for late init") suspend and CPU idle are not
initialized automatically anymore. Set shmobile_init_late() as the
machine late init hook to initialize them.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Kuninori Morimoto [Thu, 21 Jun 2012 05:40:08 +0000 (22:40 -0700)]
ARM: shmobile: kzm9g: use late init machine hook
Since commit
21cc1b7ede3cf456cf1d51f8a906093261f7c111 ("ARM: shmobile:
use machine specific hook for late init") suspend and CPU idle are not
initialized automatically anymore. Set shmobile_init_late() as the
machine late init hook to initialize them.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Laurent Pinchart [Wed, 20 Jun 2012 10:53:25 +0000 (12:53 +0200)]
ARM: mach-shmobile: armadillo800eva: Use late init machine hook
Since commit
21cc1b7ede3cf456cf1d51f8a906093261f7c111 ("ARM: shmobile:
use machine specific hook for late init") suspend and CPU idle are not
initialized automatically anymore. Set shmobile_init_late() as the
machine late init hook to initialize them.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Rafael J. Wysocki [Wed, 20 Jun 2012 10:48:31 +0000 (12:48 +0200)]
Merge branch 'renesas-sh73a0' into renesas-soc
* renesas-sh73a0:
ARM: shmobile: sh73a0: add FSI clock
Kuninori Morimoto [Tue, 12 Jun 2012 09:44:03 +0000 (02:44 -0700)]
ARM: shmobile: kzm9g: enable FSI-AK4648
This patch enable sound playback/capture on CN9/CN10.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Simon Horman <horms@verge.net.au>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Kuninori Morimoto [Tue, 12 Jun 2012 09:43:40 +0000 (02:43 -0700)]
ARM: shmobile: sh73a0: add FSI clock
This patch is required from FSI sound driver
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Simon Horman <horms@verge.net.au>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Kuninori Morimoto [Tue, 12 Jun 2012 09:39:11 +0000 (02:39 -0700)]
ARM: shmobile: armadillo800eva: enable HDMI
This patch enable HDMI support on CON3.
And removed unnecessary CONFIG_SYSFS_DEPRECATED_xxx config.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Kuninori Morimoto [Tue, 12 Jun 2012 09:37:16 +0000 (02:37 -0700)]
ARM: shmobile: r8a7740: add FSI-B (for HDMI) GPIO support
In order to enable FSI-B selection from platform board,
this patch adds its interface to GPIO framework.
This patch is based on v1.0 manual
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Kuninori Morimoto [Tue, 12 Jun 2012 09:36:58 +0000 (02:36 -0700)]
ARM: shmobile: r8a7740: add FSI parent clock support
r8a7740 FSI can select its parent clock,
and its selection is dependent on platform board.
In order to enable FSI parent selection from platform board,
this patch adds its interface to clock framework.
This patch is based on v1.0 manual
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Simon Horman <horms@verge.net.au>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Kuninori Morimoto [Tue, 12 Jun 2012 09:36:39 +0000 (02:36 -0700)]
ARM: shmobile: r8a7740: add CEU clock support
It is required from sh_mobile_ceu_camera driver.
This patch is based on v1.0 manual
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Simon Horman <horms@verge.net.au>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Kuninori Morimoto [Tue, 12 Jun 2012 09:36:21 +0000 (02:36 -0700)]
ARM: shmobile: r8a7740: add MERAM work-around
r8a7740 chip has lasting errata on MERAM buffer, and this patch adds
its work-around on setup-r8a7740.c
It solved CEU/VIO6C/2D-DMAC/VCP1/VPU5F/JPU/DISP memroy access error.
But MERAM driver can't control this issue,
since this work-around requires access to non-MERAM register address.
So, This it will be called as board specific code at this point.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Simon Horman <horms@verge.net.au>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Kuninori Morimoto [Tue, 12 Jun 2012 09:35:58 +0000 (02:35 -0700)]
ARM: shmobile: r8a7740: add HDMI GPIO support
In order to enable HDMI GPIO selection from platform board,
this patch adds its interface to GPIO framework.
This patch is based on v1.0 manual
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Kuninori Morimoto [Tue, 12 Jun 2012 09:35:36 +0000 (02:35 -0700)]
ARM: shmobile: r8a7740: add HDMI clock support
It is required from sh_mobile_hdmi driver.
This patch is based on v1.0 manual
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Kuninori Morimoto [Tue, 12 Jun 2012 09:35:15 +0000 (02:35 -0700)]
ARM: shmobile: r8a7740: add HDMI interrupt support
It is required from sh_mobile_hdmi driver.
This patch is based on v1.0 manual
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Guennadi Liakhovetski [Wed, 20 Jun 2012 10:15:59 +0000 (12:15 +0200)]
ARM: mach-shmobile: add missing GPIO IRQ configuration on mackerel
SDHI0 card-detect GPIO IRQ on mackarel currently works, because it is the
default configuration of IRQ26. However, we should not rely on this and
should configure the function explicitly.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Nobuhiro Iwamatsu [Wed, 20 Jun 2012 09:30:41 +0000 (11:30 +0200)]
ARM: mach-shmobile: Fix build when SMP is enabled and EMEV2 is not enabled
Build failed, when SMP is enabled and EMEV2 is not enabled.
arch/arm/mach-shmobile/built-in.o: In function `shmobile_platform_cpu_kill':
/home/iwamatsu/work/kernel/sh-2.6-devel/arch/arm/mach-shmobile/platsmp.c:62: undefined reference to `emev2_platform_cpu_kill'
arch/arm/mach-shmobile/built-in.o: In function `shmobile_smp_get_core_count':
/home/iwamatsu/work/kernel/sh-2.6-devel/arch/arm/mach-shmobile/platsmp.c:39: undefined reference to `emev2_get_core_count'
arch/arm/mach-shmobile/built-in.o: In function `shmobile_smp_prepare_cpus':
/home/iwamatsu/work/kernel/sh-2.6-devel/arch/arm/mach-shmobile/platsmp.c:53: undefined reference to `emev2_smp_prepare_cpus'
arch/arm/mach-shmobile/built-in.o: In function `platform_secondary_init':
/home/iwamatsu/work/kernel/sh-2.6-devel/arch/arm/mach-shmobile/platsmp.c:78: undefined reference to `emev2_secondary_init'
arch/arm/mach-shmobile/built-in.o: In function `boot_secondary':
/home/iwamatsu/work/kernel/sh-2.6-devel/arch/arm/mach-shmobile/platsmp.c:90: undefined reference to `emev2_boot_secondary
This is the cause by when EMEV2 is disabled, that the check by OF of EMEV2 is
performed in platsmp.c.
This patch revise what the function about EMEV2 may not be used in this file,
when EMEV2 is not enabled.
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Acked-by: Simon Horman <horms@verge.net.au>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Kuninori Morimoto [Wed, 20 Jun 2012 09:30:32 +0000 (11:30 +0200)]
ARM: shmobile: sh7372: bugfix: chclr_offset base
chclr_write() will use (chan_reg + chclr_offset).
In sh7372 case, DMA1CHCLR is started from 0xfe008220,
and chan_reg is started from 0xfe008020 (= sh7372_dmae0_resources).
Thus, chclr_offset should be (0x220 - 0x20) instead of 0x220.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Kuninori Morimoto [Wed, 20 Jun 2012 09:30:25 +0000 (11:30 +0200)]
ARM: shmobile: sh73a0: bugfix: SY-DMAC number
681e1b3eeb3606e06a7c4984e8058df84296f8bb
(ARM: mach-shmobile: sh73a0 DMA Engine support for SY-DMAC)
adds SY-DMAC, but it is 218, not 318
This patch is based on v2.0 manual
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Guennadi Liakhovetski [Tue, 19 Jun 2012 15:44:39 +0000 (17:44 +0200)]
regulator: extend the fixed dummy voltage regulator to accept voltage
Trivially extend the regulator_register_always_on() helper function to be
even more useful by adding a voltage parameter to it.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Guennadi Liakhovetski [Tue, 19 Jun 2012 15:43:56 +0000 (17:43 +0200)]
regulator: support multiple dummy fixed regulators
Currently regulator_register_fixed() uses a constant name to register a
fixed dummy regulator. This is sufficient in principle, since there is no
reason to register multiple such regulators. The user can simply supply all
consumers in one array and use it to initialise such a regulator. However,
in some cases it can be convenient to register multiple such regulators.
This is also a prerequisite for the upcoming patch, that will add a voltage
parameter to this function. The original function is provided as a wrapper
macro.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Linus Torvalds [Sun, 17 Jun 2012 00:25:17 +0000 (17:25 -0700)]
Linux 3.5-rc3
Linus Torvalds [Sun, 17 Jun 2012 00:01:41 +0000 (17:01 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/mason/linux-btrfs
Pull btrfs compile warning fixes from Chris Mason.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
Btrfs: cast devid to unsigned long long for printk %llu
Btrfs: init old_generation in get_old_root
Linus Torvalds [Sun, 17 Jun 2012 00:00:15 +0000 (17:00 -0700)]
Merge branch 'stable' of git://git./linux/kernel/git/cmetcalf/linux-tile
Pull arch/tile update from Chris Metcalf:
"This one-line bug fix unbreaks glibc robust mutexes (among other
things no doubt), from code merged in during the 3.5 merge window but
which we had been running internally at Tilera for almost a year."
* 'stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile:
tile: fix bug in get_user() for 4-byte values
Linus Torvalds [Sat, 16 Jun 2012 23:59:05 +0000 (16:59 -0700)]
Merge tag 'fbdev-fixes-for-3.5-1' of git://github.com/schandinat/linux-2.6
Pull fbdev fixes from Florian Tobias Schandinat:
- two fixes for s3c-fb by Jingoo Han (including a fix for a potential
division by zero)
- a couple of randconfig fixes by Arnd Bergmann
- a cleanup for bfin_adv7393fb by Emil Goode
* tag 'fbdev-fixes-for-3.5-1' of git://github.com/schandinat/linux-2.6:
video: s3c-fb: fix possible division by zero in s3c_fb_calc_pixclk
video: s3c-fb: clear SHADOWCON register when clearing hardware window registers
drivers/tosa: driver needs I2C and SPI to compile
drivers/savagefb: use mdelay instead of udelay
video/console: automatically select a font
video/ili9320: do not mark exported functions __devexit
drivers/video: use correct __devexit_p annotation
video: bfin_adv7393fb: Convert to kstrtouint_from_user
Chris Metcalf [Sat, 16 Jun 2012 20:53:06 +0000 (16:53 -0400)]
tile: fix bug in get_user() for 4-byte values
The definition of 32-bit values in the 64-bit tilegx architecture is that
they should be sign-extended regardless of whether they are considered
signed or unsigned by the compiler. Accordingly, we need to use an
"ld4s" rather than "ld4u" to load and sign-extend for get_user().
This fixes glibc bug 14238 (see http://sourceware.org/bugzilla),
introduced during the 3.5 merge window.
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
Hugh Dickins [Sat, 16 Jun 2012 00:55:50 +0000 (17:55 -0700)]
swap: fix shmem swapping when more than 8 areas
Minchan Kim reports that when a system has many swap areas, and tmpfs
swaps out to the ninth or more, shmem_getpage_gfp()'s attempts to read
back the page cannot locate it, and the read fails with -ENOMEM.
Whoops. Yes, I blindly followed read_swap_header()'s pte_to_swp_entry(
swp_entry_to_pte()) technique for determining maximum usable swap
offset, without stopping to realize that that actually depends upon the
pte swap encoding shifting swap offset to the higher bits and truncating
it there. Whereas our radix_tree swap encoding leaves offset in the
lower bits: it's swap "type" (that is, index of swap area) that was
truncated.
Fix it by reducing the SWP_TYPE_SHIFT() in swapops.h, and removing the
broken radix_to_swp_entry(swp_to_radix_entry()) from read_swap_header().
This does not reduce the usable size of a swap area any further, it
leaves it as claimed when making the original commit: no change from 3.0
on x86_64, nor on i386 without PAE; but 3.0's 512GB is reduced to 128GB
per swapfile on i386 with PAE. It's not a change I would have risked
five years ago, but with x86_64 supported for ten years, I believe it's
appropriate now.
Hmm, and what if some architecture implements its swap pte with offset
encoded below type? That would equally break the maximum usable swap
offset check. Happily, they all follow the same tradition of encoding
offset above type, but I'll prepare a check on that for next.
Reported-and-Reviewed-and-Tested-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: stable@vger.kernel.org [3.1, 3.2, 3.3, 3.4]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sat, 16 Jun 2012 00:39:32 +0000 (17:39 -0700)]
Merge tag 'scsi-fixes' of git://git./linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"This is a couple of minor fixes, one for a preempt warning in the
mpt2sas driver and one is a config failure with the new sd async
domain."
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
[SCSI] Fix sd_probe_domain config problem
[SCSI] mpt2sas: Fix unsafe using smp_processor_id() in preemptible
Linus Torvalds [Sat, 16 Jun 2012 00:37:23 +0000 (17:37 -0700)]
Merge tag 'nfs-for-3.5-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client bugfixes from Trond Myklebust:
"Highlights include:
- Fix a couple of mount regressions due to the recent cleanups.
- Fix an Oops in the open recovery code
- Fix an rpc_pipefs upcall hang that results from some of the net
namespace work from 3.4.x (stable kernel candidate).
- Fix a couple of write and o_direct regressions that were found at
last weeks Bakeathon testing event in Ann Arbor."
* tag 'nfs-for-3.5-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
NFS: add an endian notation for sparse
NFSv4.1: integer overflow in decode_cb_sequence_args()
rpc_pipefs: allow rpc_purge_list to take a NULL waitq pointer
NFSv4 do not send an empty SETATTR compound
NFSv2: EOF incorrectly set on short read
NFS: Use the NFS_DEFAULT_VERSION for v2 and v3 mounts
NFS: fix directio refcount bug on commit
NFSv4: Fix unnecessary delegation returns in nfs4_do_open
NFSv4.1: Convert another trivial printk into a dprintk
NFS4: Fix open bug when pnfs module blacklisted
NFS: Remove incorrect BUG_ON in nfs_found_client
NFS: Map minor mismatch error to protocol not support error.
NFS: Fix a commit bug
NFS4: Set parsed mount data version to 4
NFSv4.1: Ensure we clear session state flags after a session creation
NFSv4.1: Convert a trivial printk into a dprintk
NFSv4: Fix up decode_attr_mdsthreshold
NFSv4: Fix an Oops in the open recovery code
NFSv4.1: Fix a request leak on the back channel
Linus Torvalds [Sat, 16 Jun 2012 00:35:01 +0000 (17:35 -0700)]
Merge branch 'fixes-for-linus' of git://git.linaro.org/people/mszyprowski/linux-dma-mapping
Pull DMA-mapping fixes from Marek Szyprowski:
"A set of minor fixes for dma-mapping code (ARM and x86) required for
Contiguous Memory Allocator (CMA) patches merged in v3.5-rc1."
* 'fixes-for-linus' of git://git.linaro.org/people/mszyprowski/linux-dma-mapping:
x86: dma-mapping: fix broken allocation when dma_mask has been provided
ARM: dma-mapping: fix debug messages in dmabounce code
ARM: mm: fix type of the arm_dma_limit global variable
ARM: dma-mapping: Add missing static storage class specifier
Linus Torvalds [Sat, 16 Jun 2012 00:28:20 +0000 (17:28 -0700)]
Merge tag 'for-linus' of git://git./linux/kernel/git/paulus/powerpc
Pull PowerPC fix from Paul Mackerras:
"Just one commit, and a one-liner at that, but an important one;
without it hard_irq_disable() does nothing on powerpc."
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc:
Make hard_irq_disable() actually hard-disable interrupts
Linus Torvalds [Sat, 16 Jun 2012 00:27:31 +0000 (17:27 -0700)]
Merge branch 'for-3.5' of git://linux-nfs.org/~bfields/linux
Pull two nfsd bugfixes from J. Bruce Fields.
* 'for-3.5' of git://linux-nfs.org/~bfields/linux:
nfsd4: BUG_ON(!is_spin_locked()) no good on UP kernels
NFS: hard-code init_net for NFS callback transports
Linus Torvalds [Sat, 16 Jun 2012 00:17:15 +0000 (17:17 -0700)]
Merge tag 'stable/for-linus-3.5-rc2-tag' of git://git./linux/kernel/git/konrad/xen
Pull five Xen bug-fixes from Konrad Rzeszutek Wilk:
- When booting as PVHVM we would try to use PV console - but would not validate
the parameters causing us to crash during restore b/c we re-use the wrong event
channel.
- When booting on machines with SR-IOV PCI bridge we didn't check for the bridge
and tried to use it.
- Under AMD machines would advertise the APERFMPERF resulting in needless amount
of MSRs from the guest.
- A global value (xen_released_pages) was not subtracted at bootup when pages
were added back in. This resulted in the balloon worker having the wrong
account of how many pages were truly released.
- Fix dead-lock when xen-blkfront is run in the same domain as xen-blkback.
* tag 'stable/for-linus-3.5-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
xen: mark local pages as FOREIGN in the m2p_override
xen/setup: filter APERFMPERF cpuid feature out
xen/balloon: Subtract from xen_released_pages the count that is populated.
xen/pci: Check for PCI bridge before using it.
xen/events: Add WARN_ON when quick lookup found invalid type.
xen/hvc: Check HVM_PARAM_CONSOLE_[EVTCHN|PFN] for correctness.
xen/hvc: Fix error cases around HVM_PARAM_CONSOLE_PFN
xen/hvc: Collapse error logic.
Linus Torvalds [Sat, 16 Jun 2012 00:10:02 +0000 (17:10 -0700)]
Merge tag 'usb-3.5-rc3' of git://git./linux/kernel/git/gregkh/usb
Pull USB fixes from Greg Kroah-Hartman:
"Here are a bunch of tiny fixes for the USB core and drivers for
3.5-rc3
A bunch of gadget fixes, and new device ids, as well as some fixes for
a number of different regressions that have been reported recently.
We also fixed some PCI host controllers to resolve a long-standing bug
with a whole class of host controllers that have been plaguing people
for a number of kernel releases, preventing their systems from
suspending properly.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"
* tag 'usb-3.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (41 commits)
USB: fix gathering of interface associations
usb: ehci-sh: fix illegal phy_init() running when platform_data is NULL
usb: cdc-acm: fix devices not unthrottled on open
Fix OMAP EHCI suspend/resume failure (i693)
USB: ohci-hub: Mark ohci_finish_controller_resume() as __maybe_unused
usb: use usb_serial_put in usb_serial_probe errors
USB: EHCI: Fix build warning in xilinx ehci driver
USB: fix PS3 EHCI systems
xHCI: Increase the timeout for controller save/restore state operation
xhci: Don't free endpoints in xhci_mem_cleanup()
xhci: Fix invalid loop check in xhci_free_tt_info()
xhci: Fix error path return value.
USB: Checking the wrong variable in usb_disable_lpm()
usb-storage: Add 090c:1000 to unusal-devs
USB: serial-generic: use a single set of device IDs
USB: serial: Enforce USB driver and USB serial driver match
USB: add NO_D3_DURING_SLEEP flag and revert
151b61284776be2
USB: option: add more YUGA device ids
USB: mos7840: Fix compilation of usb serial driver
USB: option: fix memory leak
...
projects / platform / adaptation / renesas_rcar / renesas_kernel.git / log