review.tizen.org Git - platform/kernel/linux-starfive.git/log

arm64: dts: qcom: sc8280xp-x13s: Unreserve NC pins

[ Upstream commit 7868ed0144b33903e16a50485775f669c109e41a ]

Pins 83-86 and 158-160 are NC, so there's no point in keeping them
reserved. Take care of that.

Fixes: 32c231385ed4 ("arm64: dts: qcom: sc8280xp: add Lenovo Thinkpad X13s devicetree")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230803-topic-x13s_pin-v1-1-fae792274e89@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: msm8996: Fix dsi1 interrupts

[ Upstream commit bd3b4ac11845b428996cfd2c7b8302ba6a07340d ]

Fix IRQ flags mismatch which was keeping dsi1 from probing by changing
interrupts = <4> to interrupts = <5>.

Fixes: 2752bb7d9b58 ("arm64: dts: qcom: msm8996: add second DSI interface")
Signed-off-by: David Wronek <davidwronek@gmail.com>
Acked-by: Yassine Oudjana <y.oudjana@protonmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230805130936.359860-2-davidwronek@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: msm8998: Add missing power domain to MMSS SMMU

[ Upstream commit 7f828f3207142351750e9545527341425187de7b ]

The MMSS SMMU has its own power domain. Attach it so that we can drop
the "keep it always-on" hack.

Fixes: 05ce21b54423 ("arm64: dts: qcom: msm8998: Configure the multimedia subsystem iommu")
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230531-topic-8998_mmssclk-v3-2-ba1b1fd9ee75@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: msm8998: Drop bus clock reference from MMSS SMMU

[ Upstream commit a3ce236364b82688ca4c7605f63c4efd68e9589c ]

The MMSS SMMU has been abusingly consuming the exposed RPM interconnect
clock. Drop it.

Fixes: 05ce21b54423 ("arm64: dts: qcom: msm8998: Configure the multimedia subsystem iommu")
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230531-topic-8998_mmssclk-v3-1-ba1b1fd9ee75@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: apq8016-sbc: Fix ov5640 regulator supply names

[ Upstream commit 43a684580819e7f35b6cb38236be63c4cba26ef4 ]

The ov5640 driver expects DOVDD, AVDD and DVDD as regulator supply names.

The ov5640 has depended on these names since the driver was committed
upstream in 2017. Similarly apq8016-sbc.dtsi has had completely different
regulator names since its own initial commit in 2020.

Perhaps the regulators were left on in previous 410c bootloaders. In any
case today on 6.5 we won't switch on the ov5640 without correctly naming
the regulators.

Fixes: 39e0ce6cd1bf ("arm64: dts: qcom: apq8016-sbc: Add CCI/Sensor nodes")
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230811234738.2859417-3-bryan.odonoghue@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/mediatek: Fix potential memory leak if vmap() fail

[ Upstream commit 379091e0f6d179d1a084c65de90fa44583b14a70 ]

Also return -ENOMEM if such a failure happens, the implement should take
responsibility for the error handling.

Fixes: 3df64d7b0a4f ("drm/mediatek: Implement gem prime vmap/vunmap function")
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Signed-off-by: Sui Jingfeng <suijingfeng@loongson.cn>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20230706134000.130098-1-suijingfeng@loongson.cn/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: qcom: ipq4019: correct SDHCI XO clock

[ Upstream commit b5ed7a5c1fdb3981713f7b637b72aa390c3db036 ]

Using GCC_DCD_XO_CLK as the XO clock for SDHCI controller is not correct,
it seems that I somehow made a mistake of passing it instead of the fixed
XO clock.

Fixes: 04b3b72b5b8f ("ARM: dts: qcom: ipq4019: Add SDHCI controller node")
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230811110150.229966-1-robert.marko@sartura.hr
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/mediatek: Remove freeing not dynamic allocated memory

[ Upstream commit 27b9e2ea3f2757da26bb8280e46f7fdbb1acb219 ]

Fixing the coverity issue of:
mtk_drm_cmdq_pkt_destroy frees address of mtk_crtc->cmdq_handle

So remove the free function.

Fixes: 7627122fd1c0 ("drm/mediatek: Add cmdq_handle in mtk_crtc")
Signed-off-by: Jason-JH.Lin <jason-jh.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20230714094908.13087-2-jason-jh.lin@mediatek.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bus: ti-sysc: Fix build warning for 64-bit build

[ Upstream commit e1e1e9bb9d943ec690670a609a5f660ca10eaf85 ]

Fix "warning: cast from pointer to integer of different size" on 64-bit
builds.

Note that this is a cosmetic fix at this point as the driver is not yet
used for 64-bit systems.

Fixes: feaa8baee82a ("bus: ti-sysc: Implement SoC revision handling")
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Reviewed-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/mediatek: dp: Add missing error checks in mtk_dp_parse_capabilities

[ Upstream commit cfc146137a9f12e883ba64bc496b6da4d23f26d5 ]

If reading the RX capabilities fails the training pattern will be set
wrongly: add error checking for drm_dp_read_dpcd_caps() and return if
anything went wrong with it.

While at it, also add a less critical error check when writing to
clear the ESI0 IRQ vector.

Fixes: f70ac097a2cf ("drm/mediatek: Add MT8195 Embedded DisplayPort driver")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20230725073234.55892-2-angelogioacchino.delregno@collabora.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

io_uring: fix drain stalls by invalid SQE

[ Upstream commit cfdbaa3a291d6fd2cb4a1a70d74e63b4abc2f5ec ]

cq_extra is protected by ->completion_lock, which io_get_sqe() misses.
The bug is harmless as it doesn't happen in real life, requires invalid
SQ index array and racing with submission, and only messes up the
userspace, i.e. stall requests execution but will be cleaned up on
ring destruction.

Fixes: 15641e427070f ("io_uring: don't cache number of dropped SQEs")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/66096d54651b1a60534bb2023f2947f09f50ef73.1691538547.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

block/mq-deadline: use correct way to throttling write requests

[ Upstream commit d47f9717e5cfd0dd8c0ba2ecfa47c38d140f1bb6 ]

The original formula was inaccurate:
dd->async_depth = max(1UL, 3 * q->nr_requests / 4);

For write requests, when we assign a tags from sched_tags,
data->shallow_depth will be passed to sbitmap_find_bit,
see the following code:

nr = sbitmap_find_bit_in_word(&sb->map[index],
min_t (unsigned int,
__map_depth(sb, index),
depth),
alloc_hint, wrap);

The smaller of data->shallow_depth and __map_depth(sb, index)
will be used as the maximum range when allocating bits.

For a mmc device (one hw queue, deadline I/O scheduler):
q->nr_requests = sched_tags = 128, so according to the previous
calculation method, dd->async_depth = data->shallow_depth = 96,
and the platform is 64bits with 8 cpus, sched_tags.bitmap_tags.sb.shift=5,
sb.maps[]=32/32/32/32, 32 is smaller than 96, whether it is a read or
a write I/O, tags can be allocated to the maximum range each time,
which has not throttling effect.

In addition, refer to the methods of bfg/kyber I/O scheduler,
limit ratiois are calculated base on sched_tags.bitmap_tags.sb.shift.

This patch can throttle write requests really.

Fixes: 07757588e507 ("block/mq-deadline: Reserve 25% of scheduler tags for synchronous requests")
Signed-off-by: Zhiguo Niu <zhiguo.niu@unisoc.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/1691061162-22898-1-git-send-email-zhiguo.niu@unisoc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

audit: fix possible soft lockup in __audit_inode_child()

[ Upstream commit b59bc6e37237e37eadf50cd5de369e913f524463 ]

Tracefs or debugfs maybe cause hundreds to thousands of PATH records,
too many PATH records maybe cause soft lockup.

For example:
  1. CONFIG_KASAN=y && CONFIG_PREEMPTION=n
  2. auditctl -a exit,always -S open -k key
  3. sysctl -w kernel.watchdog_thresh=5
  4. mkdir /sys/kernel/debug/tracing/instances/test

There may be a soft lockup as follows:
  watchdog: BUG: soft lockup - CPU#45 stuck for 7s! [mkdir:15498]
  Kernel panic - not syncing: softlockup: hung tasks
  Call trace:
   dump_backtrace+0x0/0x30c
   show_stack+0x20/0x30
   dump_stack+0x11c/0x174
   panic+0x27c/0x494
   watchdog_timer_fn+0x2bc/0x390
   __run_hrtimer+0x148/0x4fc
   __hrtimer_run_queues+0x154/0x210
   hrtimer_interrupt+0x2c4/0x760
   arch_timer_handler_phys+0x48/0x60
   handle_percpu_devid_irq+0xe0/0x340
   __handle_domain_irq+0xbc/0x130
   gic_handle_irq+0x78/0x460
   el1_irq+0xb8/0x140
   __audit_inode_child+0x240/0x7bc
   tracefs_create_file+0x1b8/0x2a0
   trace_create_file+0x18/0x50
   event_create_dir+0x204/0x30c
   __trace_add_new_event+0xac/0x100
   event_trace_add_tracer+0xa0/0x130
   trace_array_create_dir+0x60/0x140
   trace_array_create+0x1e0/0x370
   instance_mkdir+0x90/0xd0
   tracefs_syscall_mkdir+0x68/0xa0
   vfs_mkdir+0x21c/0x34c
   do_mkdirat+0x1b4/0x1d4
   __arm64_sys_mkdirat+0x4c/0x60
   el0_svc_common.constprop.0+0xa8/0x240
   do_el0_svc+0x8c/0xc0
   el0_svc+0x20/0x30
   el0_sync_handler+0xb0/0xb4
   el0_sync+0x160/0x180

Therefore, we add cond_resched() to __audit_inode_child() to fix it.

Fixes: 5195d8e217a7 ("audit: dynamically allocate audit_names when not enough space is in the names array")
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm/a2xx: Call adreno_gpu_init() earlier

[ Upstream commit db07ce5da8b26bfeaf437a676ae49bd3bb1eace6 ]

The adreno_is_a20x() and adreno_is_a225() functions rely on the
GPU revision, but such information is retrieved inside adreno_gpu_init(),
which is called afterwards.

Fix this problem by caling adreno_gpu_init() earlier, so that
the GPU information revision is available when adreno_is_a20x()
and adreno_is_a225() run.

Tested on a imx53-qsb board.

Fixes: 21af872cd8c6 ("drm/msm/adreno: add a2xx")
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/543456/
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/pm: fix variable dereferenced issue in amdgpu_device_attr_create()

[ Upstream commit 25e6373a5b8efc623443f2699d2b929bf3067d76 ]

- fix variable ('attr') dereferenced issue.
- using condition check instead of BUG_ON().

Fixes: 4e01847c38f7 ("drm/amdgpu: optimize amdgpu device attribute code")
Cc: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

smackfs: Prevent underflow in smk_set_cipso()

[ Upstream commit 3ad49d37cf5759c3b8b68d02e3563f633d9c1aee ]

There is a upper bound to "catlen" but no lower bound to prevent
negatives. I don't see that this necessarily causes a problem but we
may as well be safe.

Fixes: e114e473771c ("Smack: Simplified Mandatory Access Control Kernel")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm/dpu: fix the irq index in dpu_encoder_phys_wb_wait_for_commit_done

[ Upstream commit d93cf453f51da168f4410ba73656f1e862096973 ]

Since commit 1e7ac595fa46 ("drm/msm/dpu: pass irq to
dpu_encoder_helper_wait_for_irq()") the
dpu_encoder_phys_wb_wait_for_commit_done expects the IRQ index rather
than the IRQ index in phys_enc->intr table, however writeback got the
older invocation in place. This was unnoticed for several releases, but
now it's time to fix it.

Fixes: d7d0e73f7de3 ("drm/msm/dpu: introduce the dpu_encoder_phys_* for writeback")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/550924/
Link: https://lore.kernel.org/r/20230802100426.4184892-2-dmitry.baryshkov@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

firmware: meson_sm: fix to avoid potential NULL pointer dereference

[ Upstream commit f2ed165619c16577c02b703a114a1f6b52026df4 ]

of_match_device() may fail and returns a NULL pointer.

Fix this by checking the return value of of_match_device.

Fixes: 8cde3c2153e8 ("firmware: meson_sm: Rework driver as a proper platform driver")
Signed-off-by: Zhang Shurong <zhang_shurong@foxmail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/tencent_AA08AAA6C4F34D53ADCE962E188A879B8206@qq.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm/mdp5: Don't leak some plane state

[ Upstream commit fd0ad3b2365c1c58aa5a761c18efc4817193beb6 ]

Apparently no one noticed that mdp5 plane states leak like a sieve
ever since we introduced plane_state->commit refcount a few years ago
in 21a01abbe32a ("drm/atomic: Fix freeing connector/plane state too
early by tracking commits, v3.")

Fix it by using the right helpers.

Fixes: 21a01abbe32a ("drm/atomic: Fix freeing connector/plane state too early by tracking commits, v3.")
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Abhinav Kumar <quic_abhinavk@quicinc.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Reported-and-tested-by: dorum@noisolation.com
Cc: dorum@noisolation.com
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/551236/
Link: https://lore.kernel.org/r/20230803204521.928582-1-daniel.vetter@ffwll.ch
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

soc: qcom: smem: Fix incompatible types in comparison

[ Upstream commit 5f908786cf44fcb397cfe0f322ef2f41b0909e2a ]

This patch fixes the following sparse error:

drivers/soc/qcom/smem.c:738:30: error: incompatible types in comparison expression (different add        ress spaces):
drivers/soc/qcom/smem.c:738:30:    void *
drivers/soc/qcom/smem.c:738:30:    void [noderef] __iomem *

In addr_in_range(), "base" is of type void __iomem *, converting
void *addr to the same type to fix above sparse error.

Fixes: 20bb6c9de1b7 ("soc: qcom: smem: map only partitions used by local HOST")
Signed-off-by: Chen Jiahao <chenjiahao16@huawei.com>
Link: https://lore.kernel.org/r/20230801094807.4146779-1-chenjiahao16@huawei.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm: xlnx: zynqmp_dpsub: Add missing check for dma_set_mask

[ Upstream commit 1832fba7f9780aff67c96ad30f397c2d76141833 ]

Add check for dma_set_mask() and return the error if it fails.

Fixes: d76271d22694 ("drm: xlnx: DRM/KMS driver for Xilinx ZynqMP DisplayPort Subsystem")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ima: Remove deprecated IMA_TRUSTED_KEYRING Kconfig

[ Upstream commit 5087fd9e80e539d2163accd045b73da64de7de95 ]

Time to remove "IMA_TRUSTED_KEYRING".

Fixes: f4dc37785e9b ("integrity: define '.evm' as a builtin 'trusted' keyring") # v4.5+
Signed-off-by: Nayna Jain <nayna@linux.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/panel: simple: Add missing connector type and pixel format for AUO T215HVN01

[ Upstream commit 7a675a8fa598edb29a664a91adb80f0340649f6f ]

The connector type and pixel format are missing for this panel,
add them to prevent various drivers from failing to determine
either of those parameters.

Fixes: 7ee933a1d5c4 ("drm/panel: simple: Add support for AUO T215HVN01")
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230709134914.449328-1-marex@denx.de
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/repaper: Reduce temporary buffer size in repaper_fb_dirty()

[ Upstream commit fedf429e071f6dbbe7a69dfc342492e037692018 ]

As the temporary buffer is no longer used to store 8-bit grayscale data,
its size can be reduced to the size needed to store the monochrome
bitmap data.

Fixes: 24c6bedefbe71de9 ("drm/repaper: Use format helper for xrgb8888 to monochrome conversion")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220317081830.1211400-6-geert@linux-m68k.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/armada: Fix off-by-one error in armada_overlay_get_property()

[ Upstream commit 5f0d984053f74983a287100a9519b2fabb785fb5 ]

As ffs() returns one more than the index of the first bit set (zero
means no bits set), the color key mode value is shifted one position too
much.

Fix this by using FIELD_GET() instead.

Fixes: c96103b6c49ff9a8 ("drm/armada: move colorkey properties into overlay plane state")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/a4d779d954a7515ddbbf31cb0f0d8184c0e7c879.1689600265.git.geert+renesas@glider.be
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: BCM53573: Fix Tenda AC9 switch CPU port

[ Upstream commit 7141209db9c335ab261a17933809a3e660ebdc12 ]

Primary Ethernet interface is connected to the port 8 (not 5).

Fixes: 64612828628c ("ARM: dts: BCM53573: Add Tenda AC9 switch ports")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Link: https://lore.kernel.org/r/20230723195416.7831-1-zajec5@gmail.com
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: sm8150: Fix the I2C7 interrupt

[ Upstream commit f9568d22ce06192a7e14bda3a29dc216659554ff ]

I2C6 and I2C7 use the same interrupts, which is incorrect.
In the downstream kernel, I2C7 has interrupts of 608 instead of 607.

Fixes: 81bee6953b58 ("arm64: dts: qcom: sm8150: add i2c nodes")
Signed-off-by: Zeyan Li <qaz6750@outlook.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/SY7P282MB378712225CBCEA95FE71554DB201A@SY7P282MB3787.AUSP282.PROD.OUTLOOK.COM
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

of: unittest: fix null pointer dereferencing in of_unittest_find_node_by_name()

[ Upstream commit d6ce4f0ea19c32f10867ed93d8386924326ab474 ]

when kmalloc() fail to allocate memory in kasprintf(), name
or full_name will be NULL, strcmp() will cause
null pointer dereference.

Fixes: 0d638a07d3a1 ("of: Convert to using %pOF instead of full_name")
Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com>
Link: https://lore.kernel.org/r/20230727080246.519539-1-ruanjinjie@huawei.com
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/tegra: dpaux: Fix incorrect return value of platform_get_irq

[ Upstream commit 2a1ca44b654346cadfc538c4fb32eecd8daf3140 ]

When platform_get_irq fails, we should return dpaux->irq
instead of -ENXIO.

Fixes: 6b6b604215c6 ("drm/tegra: Add eDP support")
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230710032355.72914-13-frank.li@vivo.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/msm: Update dev core dump to not print backwards

[ Upstream commit 903705111d863ed8ccf73465da77d232fc422ec1 ]

Device core dump add block method adds hardware blocks to dumping queue
with stack behavior which causes the hardware blocks to be printed in
reverse order. Change the addition to dumping queue data structure
from "list_add" to "list_add_tail" for FIFO queue behavior.

Fixes: 98659487b845 ("drm/msm: add support to take dpu snapshot")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Ryan McCann <quic_rmccann@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/546200/
Link: https://lore.kernel.org/r/20230622-devcoredump_patch-v5-1-67e8b66c4723@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

md/md-bitmap: hold 'reconfig_mutex' in backlog_store()

[ Upstream commit 44abfa6a95df425c0660d56043020b67e6d93ab8 ]

Several reasons why 'reconfig_mutex' should be held:

1) rdev_for_each() is not safe to be called without the lock, because
   rdev can be removed concurrently.
2) mddev_destroy_serial_pool() and mddev_create_serial_pool() should not
   be called concurrently.
3) mddev_suspend() from mddev_destroy/create_serial_pool() should be
   protected by the lock.

Fixes: 10c92fca636e ("md-bitmap: create and destroy wb_info_pool with the change of backlog")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20230706083727.608914-3-yukuai1@huaweicloud.com
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

md/md-bitmap: remove unnecessary local variable in backlog_store()

[ Upstream commit b4d129640f194ffc4cc64c3e97f98ae944c072e8 ]

Local variable is definied first in the beginning of backlog_store(),
there is no need to define it again.

Fixes: 8c13ab115b57 ("md/bitmap: don't set max_write_behind if there is no write mostly device")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20230706083727.608914-2-yukuai1@huaweicloud.com
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

md/raid10: use dereference_rdev_and_rrdev() to get devices

[ Upstream commit 673643490b9a0eb3b25633abe604f62b8f63dba1 ]

Commit 2ae6aaf76912 ("md/raid10: fix io loss while replacement replace
rdev") reads replacement first to prevent io loss. However, there are same
issue in wait_blocked_dev() and raid10_handle_discard(), too. Fix it by
using dereference_rdev_and_rrdev() to get devices.

Fixes: d30588b2731f ("md/raid10: improve raid10 discard request")
Fixes: f2e7e269a752 ("md/raid10: pull the code that wait for blocked dev into one function")
Signed-off-by: Li Nan <linan122@huawei.com>
Link: https://lore.kernel.org/r/20230701080529.2684932-4-linan666@huaweicloud.com
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

md/raid10: factor out dereference_rdev_and_rrdev()

[ Upstream commit b99f8fd2d91eb734f13098aa1cf337edaca454b7 ]

Factor out a helper to get 'rdev' and 'replacement' from config->mirrors.
Just to make code cleaner and prepare to fix the bug of io loss while
'replacement' replace 'rdev'.

There is no functional change.

Signed-off-by: Li Nan <linan122@huawei.com>
Link: https://lore.kernel.org/r/20230701080529.2684932-3-linan666@huaweicloud.com
Signed-off-by: Song Liu <song@kernel.org>
Stable-dep-of: 673643490b9a ("md/raid10: use dereference_rdev_and_rrdev() to get devices")
Signed-off-by: Sasha Levin <sashal@kernel.org>

md: restore 'noio_flag' for the last mddev_resume()

[ Upstream commit e24ed04389f9619e0aaef615a8948633c182a8b0 ]

memalloc_noio_save() is called for the first mddev_suspend(), and
repeated mddev_suspend() only increase 'suspended'. However,
memalloc_noio_restore() is also called for the first mddev_resume(),
which means that memory reclaim will be enabled before the last
mddev_resume() is called, while the array is still suspended.

Fix this problem by restore 'noio_flag' for the last mddev_resume().

Fixes: 78f57ef9d50a ("md: use memalloc scope APIs in mddev_suspend()/mddev_resume()")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20230628012931.88911-3-yukuai1@huaweicloud.com
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

md: Change active_io to percpu

[ Upstream commit 72adae23a72cb12e2ef0dcd7c0aa042867f27998 ]

Now the type of active_io is atomic. It's used to count how many ios are
in the submitting process and it's added and decreased very time. But it
only needs to check if it's zero when suspending the raid. So we can
switch atomic to percpu to improve the performance.

After switching active_io to percpu type, we use the state of active_io
to judge if the raid device is suspended. And we don't need to wake up
->sb_wait in md_handle_request anymore. It's done in the callback function
which is registered when initing active_io. The argument mddev->suspended
is only used to count how many users are trying to set raid to suspend
state.

Signed-off-by: Xiao Ni <xni@redhat.com>
Signed-off-by: Song Liu <song@kernel.org>
Stable-dep-of: e24ed04389f9 ("md: restore 'noio_flag' for the last mddev_resume()")
Signed-off-by: Sasha Levin <sashal@kernel.org>

md: Factor out is_md_suspended helper

[ Upstream commit d19329133d25ad3dc32f8a62635692cb2f189014 ]

This helper function will be used in next patch. It's easy for
understanding.

Signed-off-by: Xiao Ni <xni@redhat.com>
Signed-off-by: Song Liu <song@kernel.org>
Stable-dep-of: e24ed04389f9 ("md: restore 'noio_flag' for the last mddev_resume()")
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdgpu: Update min() to min_t() in 'amdgpu_info_ioctl'

[ Upstream commit a0cc8e1512ad72c9f97cdcb76d42715730adaf62 ]

Fixes the following:

WARNING: min() should probably be min_t(size_t, size, sizeof(ip))
+ ret = copy_to_user(out, &ip, min((size_t)size, sizeof(ip)));

And other style fixes:

WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
WARNING: Missing a blank line after declarations

Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: msm8996-gemini: fix touchscreen VIO supply

[ Upstream commit 21fc24ee9c5943732c9ae538766c9be93d70d936 ]

According to bindings and Linux driver, there is no VDDA but VIO supply.

Fixes: 4ac46b3682c5 ("arm64: dts: qcom: msm8996: xiaomi-gemini: Add support for Xiaomi Mi 5")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230720115335.137354-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: sdm845: Fix the min frequency of "ice_core_clk"

[ Upstream commit bbbef6e24bc4493602df68b052f6f48d48e3184a ]

Minimum frequency of the "ice_core_clk" should be 75MHz as specified in the
downstream vendor devicetree. So fix it!

https://git.codelinaro.org/clo/la/kernel/msm-4.9/-/blob/LA.UM.7.3.r1-09300-sdm845.0/arch/arm64/boot/dts/qcom/sdm845.dtsi

Fixes: 433f9a57298f ("arm64: dts: sdm845: add Inline Crypto Engine registers and clock")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20230720054100.9940-5-manivannan.sadhasivam@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: sdm845: Add missing RPMh power domain to GCC

[ Upstream commit 4b6ea15c0a1122422b44bf6c47a3c22fc8d46777 ]

GCC and it's GDSCs are under the RPMh CX power domain. So let's add the
missing RPMh power domain to the GCC node.

Fixes: 6d4cf750d03a ("arm64: dts: sdm845: Add minimal dts/dtsi files for sdm845 SoC and MTP")
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Co-developed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20230720054100.9940-4-manivannan.sadhasivam@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: BCM53573: Fix Ethernet info for Luxul devices

[ Upstream commit 44ad8207806973f4e4f7d870fff36cc01f494250 ]

Both Luxul's XAP devices (XAP-810 and XAP-1440) are access points that
use a non-default design. They don't include switch but have a single
Ethernet port and BCM54210E PHY connected to the Ethernet controller's
MDIO bus.

Support for those devices regressed due to two changes:

1. Describing MDIO bus with switch
After commit 9fb90ae6cae7 ("ARM: dts: BCM53573: Describe on-SoC BCM53125
rev 4 switch") Linux stopped probing for MDIO devices.

2. Dropping hardcoded BCM54210E delays
In commit fea7fda7f50a ("net: phy: broadcom: Fix RGMII delays
configuration for BCM54210E") support for other PHY modes was added but
that requires a proper "phy-mode" value in DT.

Both above changes are correct (they don't need to be reverted or
anything) but they need this fix for DT data to be correct and for Linux
to work properly.

Fixes: 9fb90ae6cae7 ("ARM: dts: BCM53573: Describe on-SoC BCM53125 rev 4 switch")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Link: https://lore.kernel.org/r/20230713111145.14864-1-zajec5@gmail.com
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm: adv7511: Fix low refresh rate register for ADV7533/5

[ Upstream commit d281eeaa4de2636ff0c8e6ae387bb07b50e5fcbb ]

For ADV7533 and ADV7535 low refresh rate is selected using
bits [3:2] of 0x4a main register.
So depending on ADV model write 0xfb or 0x4a register.

Fixes: 2437e7cd88e8 ("drm/bridge: adv7533: Initial support for ADV7533")
Reviewed-by: Robert Foss <rfoss@kernel.org>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Signed-off-by: Bogdan Togorean <bogdan.togorean@analog.com>
Signed-off-by: Alexandru Ardelean <alex@shruggie.ro>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230719060143.63649-1-alex@shruggie.ro
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: samsung: s5pv210-smdkv210: correct ethernet reg addresses (split)

[ Upstream commit 982655cb0e7f18934d7532c32366e574ad61dbd7 ]

The davicom,dm9000 Ethernet Controller accepts two reg addresses.

Fixes: b672b27d232e ("ARM: dts: Add Device tree for s5pc110/s5pv210 boards")
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Link: https://lore.kernel.org/r/20230713152926.82884-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: s5pv210: add dummy 5V regulator for backlight on SMDKv210

[ Upstream commit b77904ba177a9c67b6dbc3637fdf1faa22df6e5c ]

Backlight is supplied by DC5V regulator. The DTS has no PMIC node, so
just add a regulator-fixed to solve it and fix dtbs_check warning:

s5pv210-smdkv210.dtb: backlight: 'power-supply' is a required property

Link: https://lore.kernel.org/r/20230421095721.31857-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Stable-dep-of: 982655cb0e7f ("ARM: dts: samsung: s5pv210-smdkv210: correct ethernet reg addresses (split)")
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: samsung: s3c6410-mini6410: correct ethernet reg addresses (split)

[ Upstream commit cf0cb2af6a18f28b84f9f1416bff50ca60d6e98a ]

The davicom,dm9000 Ethernet Controller accepts two reg addresses.

Fixes: a43736deb47d ("ARM: dts: Add dts file for S3C6410-based Mini6410 board")
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Link: https://lore.kernel.org/r/20230713152926.82884-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/bridge: anx7625: Use common macros for HDCP capabilities

[ Upstream commit 41639b3a8b0f1f194dfe0577d99db70613f78626 ]

The DRM DP code has macros for the DP HDCP capabilities. Use them in the
anx7625 driver instead of raw numbers.

Fixes: cd1637c7e480 ("drm/bridge: anx7625: add HDCP support")
Suggested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230710091203.1874317-1-wenst@chromium.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/bridge: anx7625: Use common macros for DP power sequencing commands

[ Upstream commit 2ba776f903cb7157e80b5f314fb0b4faf6ea6958 ]

The DRM DP code has macros for the DP power sequencing commands. Use
them in the anx7625 driver instead of raw numbers.

Fixes: 548b512e144f ("drm/bridge: anx7625: send DPCD command to downstream")
Fixes: 27f26359de9b ("drm/bridge: anx7625: Set downstream sink into normal status")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230710090929.1873646-1-wenst@chromium.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86/mm: Fix PAT bit missing from page protection modify mask

[ Upstream commit 548cb932051fb6232ac983ed6673dae7bdf3cf4c ]

Visible glitches have been observed when running graphics applications on
Linux under Xen hypervisor.  Those observations have been confirmed with
failures from kms_pwrite_crc Intel GPU test that verifies data coherency
of DRM frame buffer objects using hardware CRC checksums calculated by
display controllers, exposed to userspace via debugfs.  Affected
processing paths have then been identified with new IGT test variants that
mmap the objects using different methods and caching modes [1].

When running as a Xen PV guest, Linux uses Xen provided PAT configuration
which is different from its native one.  In particular, Xen specific PTE
encoding of write-combining caching, likely used by graphics applications,
differs from the Linux default one found among statically defined minimal
set of supported modes.  Since Xen defines PTE encoding of the WC mode as
_PAGE_PAT, it no longer belongs to the minimal set, depends on correct
handling of _PAGE_PAT bit, and can be mismatched with write-back caching.

When a user calls mmap() for a DRM buffer object, DRM device specific
.mmap file operation, called from mmap_region(), takes care of setting PTE
encoding bits in a vm_page_prot field of an associated virtual memory area
structure.  Unfortunately, _PAGE_PAT bit is not preserved when the vma's
.vm_flags are then applied to .vm_page_prot via vm_set_page_prot().  Bits
to be preserved are determined with _PAGE_CHG_MASK symbol that doesn't
cover _PAGE_PAT.  As a consequence, WB caching is requested instead of WC
when running under Xen (also, WP is silently changed to WT, and UC
downgraded to UC_MINUS).  When running on bare metal, WC is not affected,
but WP and WT extra modes are unintentionally replaced with WC and UC,
respectively.

WP and WT modes, encoded with _PAGE_PAT bit set, were introduced by commit
281d4078bec3 ("x86: Make page cache mode a real type").  Care was taken
to extend _PAGE_CACHE_MASK symbol with that additional bit, but that
symbol has never been used for identification of bits preserved when
applying page protection flags.  Support for all cache modes under Xen,
including the problematic WC mode, was then introduced by commit
47591df50512 ("xen: Support Xen pv-domains using PAT").

The issue needs to be fixed by including _PAGE_PAT bit into a bitmask used
by pgprot_modify() for selecting bits to be preserved.  We can do that
either internally to pgprot_modify() (as initially proposed), or by making
_PAGE_PAT a part of _PAGE_CHG_MASK.  If we go for the latter then, since
_PAGE_PAT is the same as _PAGE_PSE, we need to note that _HPAGE_CHG_MASK
-- a huge pmds' counterpart of _PAGE_CHG_MASK, introduced by commit
c489f1257b8c ("thp: add pmd_modify"), defined as (_PAGE_CHG_MASK |
_PAGE_PSE) -- will no longer differ from _PAGE_CHG_MASK.  If such
modification of _PAGE_CHG_MASK was irrelevant to its users then one might
wonder why that new _HPAGE_CHG_MASK symbol was introduced instead of
reusing the existing one with that otherwise irrelevant bit (_PAGE_PSE in
that case) added.

Add _PAGE_PAT to _PAGE_CHG_MASK and _PAGE_PAT_LARGE to _HPAGE_CHG_MASK for
symmetry.  Split out common bits from both symbols to a common symbol for
clarity.

[ dhansen: tweak the solution changelog description ]

[1] https://gitlab.freedesktop.org/drm/igt-gpu-tools/-/commit/0f0754413f14

Fixes: 281d4078bec3 ("x86: Make page cache mode a real type")
Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Tested-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Link: https://gitlab.freedesktop.org/drm/intel/-/issues/7648
Link: https://lore.kernel.org/all/20230710073613.8006-2-janusz.krzysztofik%40linux.intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

block: don't allow enabling a cache on devices that don't support it

[ Upstream commit 43c9835b144c7ce29efe142d662529662a9eb376 ]

Currently the write_cache attribute allows enabling the QUEUE_FLAG_WC
flag on devices that never claimed the capability.

Fix that by adding a QUEUE_FLAG_HW_WC flag that is set by
blk_queue_write_cache and guards re-enabling the cache through sysfs.

Note that any rescan that calls blk_queue_write_cache will still
re-enable the write cache as in the current code.

Fixes: 93e9d8e836cb ("block: add ability to flag write back caching on a device")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230707094239.107968-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

block: cleanup queue_wc_store

[ Upstream commit c4e21bcd0f9d01f9c5d6c52007f5541871a5b1de ]

Get rid of the local queue_wc_store variable and handling setting and
clearing the QUEUE_FLAG_WC flag diretly instead the if / else if.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230707094239.107968-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Stable-dep-of: 43c9835b144c ("block: don't allow enabling a cache on devices that don't support it")
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/etnaviv: fix dumping of active MMU context

[ Upstream commit 20faf2005ec85fa1a6acc9a74ff27de667f90576 ]

gpu->mmu_context is the MMU context of the last job in the HW queue, which
isn't necessarily the same as the context from the bad job. Dump the MMU
context from the scheduler determined bad submit to make it work as intended.

Fixes: 17e4660ae3d7 ("drm/etnaviv: implement per-process address spaces on MMUv2")
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: tegra: Fix HSUART for Smaug

[ Upstream commit 590bfe51838f6345a6a3288507661dc9b7208464 ]

After commit 71de0a054d0e ("arm64: tegra: Drop serial clock-names and
reset-names") was applied, the HSUART failed to probe and the following
error is seen:

serial-tegra 70006300.serial: Couldn't get the reset
serial-tegra: probe of 70006300.serial failed with error -2

Commit 71de0a054d0e ("arm64: tegra: Drop serial clock-names and
reset-names") is correct because the "reset-names" property is not
needed for 8250 UARTs. However, the "reset-names" is required for the
HSUART and should have been populated as part of commit a63c0cd83720c
("arm64: dts: tegra: smaug: Add Bluetooth node") that enabled the HSUART
for the Pixel C. Fix this by populating the "reset-names" property for
the HSUART on the Pixel C.

Fixes: a63c0cd83720 ("arm64: dts: tegra: smaug: Add Bluetooth node")
Signed-off-by: Diogo Ivo <diogo.ivo@tecnico.ulisboa.pt>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: pmi8994: Add missing OVP interrupt

[ Upstream commit 8db94432690371b1736e9a2566a9b3d8a73d5a97 ]

Add the missing OVP interrupt. This fixes the schema warning:

wled@d800: interrupt-names: ['short'] is too short

Fixes: 37aa540cbd30 ("arm64: dts: qcom: pmi8994: Add WLED node")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230626-topic-bindingsfixups-v1-6-254ae8642e69@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: pm660l: Add missing short interrupt

[ Upstream commit 9a4ac09db3c7413e334b4abd6b2f6de8930dd781 ]

Add the missing short interrupt. This fixes the schema warning:

wled@d800: interrupt-names: ['ovp'] is too short

Fixes: 7b56a804e58b ("arm64: dts: qcom: pm660l: Add WLED support")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230626-topic-bindingsfixups-v1-4-254ae8642e69@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: pm6150l: Add missing short interrupt

[ Upstream commit 7e1f024ef0d1da456f61d00f01dc3287ede915b3 ]

Add the missing short interrupt. This fixes the schema warning:

wled@d800: interrupt-names: ['ovp'] is too short

Fixes: fe508ced49dd ("arm64: dts: qcom: pm6150l: Add wled node")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Luca Weiss <luca@z3ntu.xyz>
Link: https://lore.kernel.org/r/20230626-topic-bindingsfixups-v1-3-254ae8642e69@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: sm8250-sony-xperia: correct GPIO keys wakeup again

[ Upstream commit b8fbeea0253211d97c579eae787274633d3eaf0d ]

gpio-keys,wakeup is a deprecated property:

m8250-sony-xperia-edo-pdx206.dtb: gpio-keys: key-camera-focus: Unevaluated properties are not allowed ('gpio-key,wakeup' was unexpected)

Fixes: a422c6a91a66 ("arm64: dts: qcom: sm8250-edo: Rectify gpio-keys")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230711063011.16222-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: tegra: Fix HSUART for Jetson AGX Orin

[ Upstream commit 861dbb2b15b1049113887fb95e856f7123eea0cc ]

After commit 71de0a054d0e ("arm64: tegra: Drop serial clock-names and
reset-names") was applied, the HSUART failed to probe and the following
error is seen:

serial-tegra 3100000.serial: Couldn't get the reset
serial-tegra: probe of 3100000.serial failed with error -2

Commit 71de0a054d0e ("arm64: tegra: Drop serial clock-names and
reset-names") is correct because the "reset-names" property is not
needed for 8250 UARTs. However, the "reset-names" is required for the
HSUART and should have been populated as part of commit ff578db7b693
("arm64: tegra: Enable UART instance on 40-pin header") that
enabled the HSUART for Jetson AGX Orin. Fix this by populating the
"reset-names" property for the HSUART on Jetson AGX Orin.

Fixes: ff578db7b693 ("arm64: tegra: Enable UART instance on 40-pin header")
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: BCM53573: Use updated "spi-gpio" binding properties

[ Upstream commit 2c0fd6b3d0778ceab40205315ccef74568490f17 ]

Switch away from deprecated properties.

This fixes:
arch/arm/boot/dts/broadcom/bcm947189acdbmr.dtb: spi: gpio-sck: False schema does not allow [[3, 21, 0]]
        From schema: Documentation/devicetree/bindings/spi/spi-gpio.yaml
arch/arm/boot/dts/broadcom/bcm947189acdbmr.dtb: spi: gpio-miso: False schema does not allow [[3, 22, 0]]
        From schema: Documentation/devicetree/bindings/spi/spi-gpio.yaml
arch/arm/boot/dts/broadcom/bcm947189acdbmr.dtb: spi: gpio-mosi: False schema does not allow [[3, 23, 0]]
        From schema: Documentation/devicetree/bindings/spi/spi-gpio.yaml
arch/arm/boot/dts/broadcom/bcm947189acdbmr.dtb: spi: 'sck-gpios' is a required property
        From schema: Documentation/devicetree/bindings/spi/spi-gpio.yaml
arch/arm/boot/dts/broadcom/bcm947189acdbmr.dtb: spi: Unevaluated properties are not allowed ('gpio-miso', 'gpio-mosi', 'gpio-sck' were unexpected)
        From schema: Documentation/devicetree/bindings/spi/spi-gpio.yaml

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Link: https://lore.kernel.org/r/20230707114004.2740-4-zajec5@gmail.com
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: BCM53573: Add cells sizes to PCIe node

[ Upstream commit 3392ef368d9b04622fe758b1079b512664b6110a ]

This fixes:
arch/arm/boot/dts/broadcom/bcm47189-luxul-xap-1440.dtb: pcie@2000: '#address-cells' is a required property
From schema: /lib/python3.10/site-packages/dtschema/schemas/pci/pci-bus.yaml
arch/arm/boot/dts/broadcom/bcm47189-luxul-xap-1440.dtb: pcie@2000: '#size-cells' is a required property
From schema: /lib/python3.10/site-packages/dtschema/schemas/pci/pci-bus.yaml

Two properties that need to be added later are "device_type" and
"ranges". Adding "device_type" on its own causes a new warning and the
value of "ranges" needs to be determined yet.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Link: https://lore.kernel.org/r/20230707114004.2740-3-zajec5@gmail.com
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: BCM53573: Drop nonexistent #usb-cells

[ Upstream commit 05d2c3d552b8c92fc397377d9d1112fc58e2cd59 ]

Such property simply doesn't exist (is not documented or used anywhere).

This fixes:
arch/arm/boot/dts/broadcom/bcm47189-luxul-xap-1440.dtb: usb@d000: Unevaluated properties are not allowed ('#usb-cells' was unexpected)
From schema: Documentation/devicetree/bindings/usb/generic-ohci.yaml

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Link: https://lore.kernel.org/r/20230707114004.2740-2-zajec5@gmail.com
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdgpu: avoid integer overflow warning in amdgpu_device_resize_fb_bar()

[ Upstream commit 822130b5e8834ab30ad410cf19a582e5014b9a85 ]

On 32-bit architectures comparing a resource against a value larger than
U32_MAX can cause a warning:

drivers/gpu/drm/amd/amdgpu/amdgpu_device.c:1344:18: error: result of comparison of constant 4294967296 with expression of type 'resource_size_t' (aka 'unsigned int') is always false [-Werror,-Wtautological-constant-out-of-range-compare]
res->start > 0x100000000ull)
~~~~~~~~~~ ^ ~~~~~~~~~~~~~~

As gcc does not warn about this in dead code, add an IS_ENABLED() check at
the start of the function. This will always return success but not actually resize
the BAR on 32-bit architectures without high memory, which is exactly what
we want here, as the driver can fall back to bank switching the VRAM
access.

Fixes: 31b8adab3247 ("drm/amdgpu: require a root bus window above 4GB for BAR resize")
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

firmware: ti_sci: Use system_state to determine polling

[ Upstream commit 9225bcdedf16297a346082e7d23b0e8434aa98ed ]

Commit b9e8a7d950ff ("firmware: ti_sci: Switch transport to polled
mode during system suspend") aims to resolve issues with tisci
operations during system suspend operation. However, the system may
enter a no_irq stage in various other usage modes, including power-off
and restart. To determine if polling mode is appropriate, use the
system_state instead.

While at this, drop the unused is_suspending state variable and
related helpers.

Fixes: b9e8a7d950ff ("firmware: ti_sci: Switch transport to polled mode during system suspend")
Reported-by: Francesco Dolcini <francesco@dolcini.it>
Reported-by: Wadim Egorov <w.egorov@phytec.de>
Tested-by: Francesco Dolcini <francesco.dolcini@toradex.com> # Toradex Verdin AM62
Link: https://lore.kernel.org/r/20230620130329.4120443-1-nm@ti.com
Closes: https://lore.kernel.org/all/ZGeHMjlnob2GFyHF@francesco-nb.int.toradex.com/
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: stm32: Add missing detach mailbox for DHCOM SoM

[ Upstream commit deb7edbc27a6ec4d8f5edfd8519b7ed13cbd2a52 ]

Add missing "detach" mailbox to this board to permit the CPU to inform
the remote processor on a detach. This signal allows the remote processor
firmware to stop IPC communication and to reinitialize the resources for
a re-attach.

Without this mailbox, detach is not possible and kernel log contains the
following warning to, so make sure all the STM32MP15xx platform DTs are
in sync regarding the mailboxes to fix the detach issue and the warning:
"
stm32-rproc 10000000.m4: mbox_request_channel_byname() could not locate channel named "detach"
"

Fixes: 6257dfc1c412 ("ARM: dts: stm32: Add coprocessor detach mbox on stm32mp15x-dkx boards")
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: stm32: Update to generic ADC channel binding on DHSOM systems

[ Upstream commit 9bcfc3cdc903485a52c6f471f4ae96a41fa51803 ]

The generic ADC channel binding is recommended over legacy one, update the
DT to the modern binding. No functional change. For further details, see
commit which adds the generic binding to STM32 ADC binding document:
'664b9879f56e ("dt-bindings: iio: stm32-adc: add generic channel binding")'

Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Stable-dep-of: deb7edbc27a6 ("ARM: dts: stm32: Add missing detach mailbox for DHCOM SoM")
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: stm32: Add missing detach mailbox for Odyssey SoM

[ Upstream commit 966f04a89d77548e673de2c400abe0b2cf5c15db ]

Add missing "detach" mailbox to this board to permit the CPU to inform
the remote processor on a detach. This signal allows the remote processor
firmware to stop IPC communication and to reinitialize the resources for
a re-attach.

Without this mailbox, detach is not possible and kernel log contains the
following warning to, so make sure all the STM32MP15xx platform DTs are
in sync regarding the mailboxes to fix the detach issue and the warning:
"
stm32-rproc 10000000.m4: mbox_request_channel_byname() could not locate channel named "detach"
"

Fixes: 6257dfc1c412 ("ARM: dts: stm32: Add coprocessor detach mbox on stm32mp15x-dkx boards")
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: stm32: YAML validation fails for Odyssey Boards

[ Upstream commit 84a34e1862aae43e4dcdfb743a7dd3ade1fe4a3c ]

"make dtbs_check" gives following output :
stm32mp157c-odyssey.dt.yaml: gpu@59000000: 'contiguous-area' does not match
any of the regexes: 'pinctrl-[0-9]+'
From schema: Documentation/devicetree/bindings/gpu/vivante,gc.yaml

Signed-off-by: Pierre-Yves MORDRET <pierre-yves.mordret@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Stable-dep-of: 966f04a89d77 ("ARM: dts: stm32: Add missing detach mailbox for Odyssey SoM")
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: stm32: Add missing detach mailbox for emtrion emSBC-Argon

[ Upstream commit 0ee0ef38aa9f75f21b51f729dd42b2e932515188 ]

Add missing "detach" mailbox to this board to permit the CPU to inform
the remote processor on a detach. This signal allows the remote processor
firmware to stop IPC communication and to reinitialize the resources for
a re-attach.

Without this mailbox, detach is not possible and kernel log contains the
following warning to, so make sure all the STM32MP15xx platform DTs are
in sync regarding the mailboxes to fix the detach issue and the warning:
"
stm32-rproc 10000000.m4: mbox_request_channel_byname() could not locate channel named "detach"
"

Fixes: 6257dfc1c412 ("ARM: dts: stm32: Add coprocessor detach mbox on stm32mp15x-dkx boards")
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: stm32: adopt generic iio bindings for adc channels on emstamp-argon

[ Upstream commit c46e9b6cc98245f7264a8d15394d1f95d433abec ]

Use STM32 ADC generic bindings instead of legacy bindings on
emtrion GmbH Argon boards.

The STM32 ADC specific binding to declare channels has been deprecated,
hence adopt the generic IIO channels bindings, instead.
The STM32MP151 device tree now exposes internal channels using the
generic binding. This makes the change mandatory here to avoid a mixed
use of legacy and generic binding, which is not supported by the driver.

Signed-off-by: Olivier Moysan <olivier.moysan@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Stable-dep-of: 0ee0ef38aa9f ("ARM: dts: stm32: Add missing detach mailbox for emtrion emSBC-Argon")
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: stm32: YAML validation fails for Argon Boards

[ Upstream commit fc8d2b21bc5d5d7a6eadaa8c2a5d2e6856689480 ]

"make dtbs_check" gives following output :
stm32mp157c-emstamp-argon.dtb: gpu@59000000: 'contiguous-area' does not match
any of the regexes: 'pinctrl-[0-9]+'
From schema: Documentation/devicetree/bindings/gpu/vivante,gc.yaml

Signed-off-by: Pierre-Yves MORDRET <pierre-yves.mordret@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Stable-dep-of: 0ee0ef38aa9f ("ARM: dts: stm32: Add missing detach mailbox for emtrion emSBC-Argon")
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: stm32: Rename mdio0 to mdio

[ Upstream commit a306d8962a24f4e8385853793fd58f9792c7aa61 ]

Replace "mdio0" node with "mdio" to match mdio.yaml DT schema.

Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Stable-dep-of: 0ee0ef38aa9f ("ARM: dts: stm32: Add missing detach mailbox for emtrion emSBC-Argon")
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: sm8250: Mark PCIe hosts as DMA coherent

[ Upstream commit 339d38a436f30d0f874815eafc7de2257346bf26 ]

The PCIe hosts on SM8250 are cache-coherent. Mark them as such.

Fixes: e53bdfc00977 ("arm64: dts: qcom: sm8250: Add PCIe support")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230704-topic-8250_pcie_dmac-v1-1-799603a980b0@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: pmk8350: fix ADC-TM compatible string

[ Upstream commit 435a73d7377ceb29c1a22d2711dd85c831b40c45 ]

The commit b2de43136058 ("arm64: dts: qcom: pmk8350: Add peripherals for
pmk8350") for the ADC TM (thermal monitoring device) have used the
compatible string from the vendor kernel ("qcom,adc-tm7"). Use the
proper compatible string that is defined in the upstream kernel
("qcom,spmi-adc-tm5-gen2").

Fixes: b2de43136058 ("arm64: dts: qcom: pmk8350: Add peripherals for pmk8350")
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230707123027.1510723-6-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: pmr735b: fix thermal zone name

[ Upstream commit 99f8cf491d546cd668236f573c7d846d3e94f2d6 ]

The name of the thermal zone in pmr735b.dtsi (pmr735a-thermal) conflicts
with the thermal zone in pmr735a.dtsi. Rename the thermal zone according
to the chip name.

Fixes: 6f3426b3dea4 ("arm64: dts: qcom: pmr735b: add temp sensor and thermal zone config")
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230707123027.1510723-5-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: pm8350b: fix thermal zone name

[ Upstream commit aad41d9e6c44dfe299cddab97528a5333f17bdfe ]

The name of the thermal zone in pm8350b.dtsi (pm8350c-thermal) conflicts
with the thermal zone in pm8350c.dtsi. Rename the thermal zone according
to the chip name.

Fixes: 5c1399299d9d ("arm64: dts: qcom: pm8350b: add temp sensor and thermal zone config")
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230707123027.1510723-4-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: pm8350: fix thermal zone name

[ Upstream commit 64f19c06f704846db5e4885ca63c689d9bef5723 ]

The name of the thermal zone in pm8350.dtsi (pm8350c-thermal) conflicts
with the thermal zone in pm8350c.dtsi. Rename the thermal zone according
to the chip name.

Fixes: 7a79b95f4288 ("arm64: dts: qcom: pm8350: add temp sensor and thermal zone config")
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230707123027.1510723-3-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: sm8350: Use proper CPU compatibles

[ Upstream commit 4390730cc12af25f7c997f477795f5f4200149c0 ]

The Kryo names (once again) turned out to be fake. The CPUs report:

0x412fd050 (CA55 r2p0) (0 - 3)
0x411fd410 (CA78 r1p1) (4 - 6)
0x411fd440 (CX1 r1p1) (7)

Use the compatibles that reflect that.

Fixes: b7e8f433a673 ("arm64: dts: qcom: Add basic devicetree support for SM8350 SoC")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230706-topic-sm8350-cpu-compat-v1-1-f8d6a1869781@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: sm8350: Add missing LMH interrupts to cpufreq

[ Upstream commit 951151c2bb548e0f6b2c40ab4c48675f5342c914 ]

Add the missing interrupts that communicate the hardware-managed
throttling to Linux.

Fixes: ccbb3abb23a5 ("arm64: dts: qcom: sm8350: Add cpufreq node")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230705-topic-sm8350_fixes-v1-3-0f69f70ccb6a@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: sm8350: Fix CPU idle state residency times

[ Upstream commit 91ce3693e2fb685f31d39605a5ad1fbd940804da ]

The present values look to have been copypasted from 8150 or 8180.
Fix that.

Fixes: 07ddb302811e ("arm64: dts: qcom: sm8350: Add CPU topology and idle-states")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230705-topic-sm8350_fixes-v1-2-0f69f70ccb6a@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: sdm845-tama: Set serial indices and stdout-path

[ Upstream commit 9acc60c3e2d449243e4c2126e3b56f1c4f7fd3bc ]

UART6 is used for debug (routed via uSD pins) and UART9 is connected
to the bluetooth chip.

Set indexed aliases to make the GENI UART driver happy and route serial
traffic through the debug uart by default.

Fixes: 30a7f99befc6 ("arm64: dts: qcom: Add support for SONY Xperia XZ2 / XZ2C / XZ3 (Tama platform)")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Link: https://lore.kernel.org/r/20230627-topic-tama_uart-v1-1-0fa790248db8@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: msm8996: Add missing interrupt to the USB2 controller

[ Upstream commit 36541089c4733355ed844c67eebd0c3936953454 ]

The interrupt line was previously not described. Take care of that.

Fixes: 1e39255ed29d ("arm64: dts: msm8996: Add device node for qcom,dwc3")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230627-topic-more_bindings-v1-11-6b4b6cd081e5@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: sc8280xp: Add missing SCM interconnect

[ Upstream commit 0a69ccf20b0837db857abfc94d7e3bacf1cb771b ]

The SCM interconnect path was missing. Add it.

Fixes: 152d1faf1e2f ("arm64: dts: qcom: add SC8280XP platform")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20230622-topic-8280scmicc-v1-2-6ef318919ea5@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: sc8280xp-crd: Correct vreg_misc_3p3 GPIO

[ Upstream commit 9566b5271f68bdf6e69b7c511850e3fb75cd18be ]

The vreg_misc_3p3 regulator is controlled by PMC8280_1 GPIO 2, not 1, on
the CRD.

Fixes: ccd3517faf18 ("arm64: dts: qcom: sc8280xp: Add reference device")
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230620203915.141337-1-quic_bjorande@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: sm8250-edo: Rectify gpio-keys

[ Upstream commit a422c6a91a667b309ca1a6c08b30dbfcf7d4e866 ]

Set up the corresponding GPIOs properly and add the leftover hardware
buttons to mark this piece of the puzzle complete.

Fixes: 46e14907c716 ("arm64: dts: qcom: sm8250-edo: Add hardware keys")
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230614-topic-edo_pinsgpiopmic-v2-4-6f90bba54c53@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: sm8250-edo: Add GPIO line names for PMIC GPIOs

[ Upstream commit 6b8a63350752c6a5e4b54f2de6174084652cd3cd ]

Sony ever so graciously provides GPIO line names in their downstream
kernel (though sometimes they are not 100% accurate and you can judge
that by simply looking at them and with what drivers they are used).

Add these to the PDX203&206 DTSIs to better document the hardware.

Diff between 203 and 206:
pm8009_gpios
<                         "CAM_PWR_LD_EN",
>                         "NC",

pm8150_gpios
<                         "NC",
>                         "G_ASSIST_N",
<                         "WLC_EN_N", /* GPIO_10 */
>                         "NC", /* GPIO_10 */
Which is due to 5 II having an additional Google Assistant hardware
button and 1 II having a wireless charger & different camera wiring
to accommodate the additional 3D iToF sensor.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230614-topic-edo_pinsgpiopmic-v2-2-6f90bba54c53@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Stable-dep-of: a422c6a91a66 ("arm64: dts: qcom: sm8250-edo: Rectify gpio-keys")
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: sm8250-edo: Add gpio line names for TLMM

[ Upstream commit 40b398beabdfe0e9088b13976e56b1dc706fe851 ]

Sony ever so graciously provides GPIO line names in their downstream
kernel (though sometimes they are not 100% accurate and you can judge
that by simply looking at them and with what drivers they are used).

Add these to the PDX203&206 DTSIs to better document the hardware.

Diff between 203 and 206:
<                         "CAM_PWR_A_CS",
>                         "FRONTC_PWR_EN",
<                         "CAM4_MCLK",
<                         "TOF_RST_N",
>                         "NC",
>                         "NC",
<                         "WLC_I2C_SDA",
<                         "WLC_I2C_SCL", /* GPIO_120 */
>                         "NC",
>                         "NC",
<                         "WLC_INT_N",
>                         "NC",

Which makes sense, as 203 has a 3D iToF, slightly different camera
power wiring and WLC (WireLess Charging).

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230614-topic-edo_pinsgpiopmic-v2-1-6f90bba54c53@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Stable-dep-of: a422c6a91a66 ("arm64: dts: qcom: sm8250-edo: Rectify gpio-keys")
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: msm8916-l8150: correct light sensor VDDIO supply

[ Upstream commit 6a541eaa6e8e5283efb993ae7a947bede8d01fa5 ]

liteon,ltr559 light sensor takes VDDIO, not VIO, supply:

msm8916-longcheer-l8150.dtb: light-sensor@23: 'vio-supply' does not match any of the regexes: 'pinctrl-[0-9]+'

Fixes: 3016af34ef8d ("arm64: dts: qcom: msm8916-longcheer-l8150: Add light and proximity sensor")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Nikita Travkin <nikita@trvn.ru>
Link: https://lore.kernel.org/r/20230617171541.286957-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: sm8250: correct dynamic power coefficients

[ Upstream commit 775a5283c25d160b2a1359018c447bc518096547 ]

sm8250 faces the same problem with its Energy Model as sdm845. The energy
cost of LITTLE cores is reported to be higher than medium or big cores

EM computes the energy with formula:

energy = OPP's cost / maximum cpu capacity * utilization

On v6.4-rc6 we have:
max capacity of CPU0 = 284
capacity of CPU0's OPP(1612800 Hz) = 253
cost of CPU0's OPP(1612800 Hz) = 191704

max capacity of CPU4 = 871
capacity of CPU4's OPP(710400 Hz) = 255
cost of CPU4's OPP(710400 Hz) = 343217

Both OPPs have almost the same compute capacity but the estimated energy
per unit of utilization will be estimated to:

energy CPU0 = 191704 / 284 * 1 = 675
energy CPU4 = 343217 / 871 * 1 = 394

EM estimates that little CPU0 will consume 71% more than medium CPU4 for
the same compute capacity. According to [1], little consumes 25% less than
medium core for Coremark benchmark at those OPPs for the same duration.

Set the dynamic-power-coefficient of CPU0-3 to 105 to fix the energy model
for little CPUs.

[1] https://github.com/kdrag0n/freqbench/tree/master/results/sm8250/k30s

Fixes: 6aabed5526ee ("arm64: dts: qcom: sm8250: Add CPU capacities and energy model")
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/20230615154852.130076-1-vincent.guittot@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: sm6350: Fix ZAP region

[ Upstream commit 44bcded2be4fe9b9d0b6e48075c9947b75c0af63 ]

The previous ZAP region definition was wrong. Fix it.
Note this is not a device-specific fixup, but a fixup to the generic
PIL load address.

Fixes: 5f82b9cda61e ("arm64: dts: qcom: Add SM6350 device tree")
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Reviewed-by: Luca Weiss <luca.weiss@fairphone.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230315-topic-lagoon_gpu-v2-6-afcdfb18bb13@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

soc: qcom: ocmem: Fix NUM_PORTS & NUM_MACROS macros

[ Upstream commit a7b484b1c9332a1ee12e8799d62a11ee3f8e0801 ]

Since we're using these two macros to read a value from a register, we
need to use the FIELD_GET instead of the FIELD_PREP macro, otherwise
we're getting wrong values.

So instead of:

[ 3.111779] ocmem fdd00000.sram: 2 ports, 1 regions, 512 macros, not interleaved

we now get the correct value of:

[ 3.129672] ocmem fdd00000.sram: 2 ports, 1 regions, 2 macros, not interleaved

Fixes: 88c1e9404f1d ("soc: qcom: add OCMEM driver")
Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Link: https://lore.kernel.org/r/20230506-msm8226-ocmem-v3-1-79da95a2581f@z3ntu.xyz
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

soc: qcom: ocmem: Add OCMEM hardware version print

[ Upstream commit e81a16e77259294cd4ff0a9c1fbe5aa0e311a47d ]

It might be useful to know what hardware version of the OCMEM block the
SoC contains. Add a debug print for that.

Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230509-ocmem-hwver-v3-1-e51f3488e0f4@z3ntu.xyz
Stable-dep-of: a7b484b1c933 ("soc: qcom: ocmem: Fix NUM_PORTS & NUM_MACROS macros")
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: stac9766: fix build errors with REGMAP_AC97

[ Upstream commit c70064b96f509daa78f57992aeabcf274fb2fed4 ]

Select REGMAP_AC97 to fix these build errors:

ERROR: modpost: "regmap_ac97_default_volatile" [sound/soc/codecs/snd-soc-stac9766.ko] undefined!
ERROR: modpost: "__regmap_init_ac97" [sound/soc/codecs/snd-soc-stac9766.ko] undefined!

Fixes: 6bbf787bb70c ("ASoC: stac9766: Convert to regmap")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Mark Brown <broonie@kernel.org>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: alsa-devel@alsa-project.org
Link: https://lore.kernel.org/r/20230701044836.18789-1-rdunlap@infradead.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/hyperv: Fix a compilation issue because of not including screen_info.h

[ Upstream commit 8d1077cf2e43b15fefd76ebec2b71541eb27ef2c ]

Fixes the following build errors on arm64:

drivers/video/fbdev/hyperv_fb.c: In function 'hvfb_getmem':
>> drivers/video/fbdev/hyperv_fb.c:1033:24: error: 'screen_info' undeclared (first use in this function)
    1033 |                 base = screen_info.lfb_base;
         |                        ^~~~~~~~~~~
drivers/video/fbdev/hyperv_fb.c:1033:24: note: each undeclared identifier is reported only once for each function it appears in

>> drivers/gpu/drm/hyperv/hyperv_drm_drv.c:75:54: error: 'screen_info' undeclared (first use in this function)
      75 |         drm_aperture_remove_conflicting_framebuffers(screen_info.lfb_base,
|                                                      ^~~~~~~~~~~
drivers/gpu/drm/hyperv/hyperv_drm_drv.c:75:54: note: each undeclared identifier is reported only once for each function it appears in

Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202307090823.nxnT8Kk5-lkp@intel.com/
Fixes: 81d2393485f0 ("fbdev/hyperv-fb: Do not set struct fb_info.apertures")
Fixes: 8b0d13545b09 ("efi: Do not include <linux/screen_info.h> from EFI header")
Signed-off-by: Sui Jingfeng <suijingfeng@loongson.cn>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230709100514.703759-1-suijingfeng@loongson.cn
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/display: Do not set drr on pipe commit

[ Upstream commit e101bf95ea87ccc03ac2f48dfc0757c6364ff3c7 ]

[WHY]
Writing to DRR registers such as OTG_V_TOTAL_MIN on the same frame as a
pipe commit can cause underflow.

[HOW]
Move DMUB p-state delegate into optimze_bandwidth; enabling FAMS sets
optimized_required.

This change expects that Freesync requests are blocked when
optimized_required is true.

Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

quota: fix dqput() to follow the guarantees dquot_srcu should provide

[ Upstream commit dabc8b20756601b9e1cc85a81d47d3f98ed4d13a ]

The dquot_mark_dquot_dirty() using dquot references from the inode
should be protected by dquot_srcu. quota_off code takes care to call
synchronize_srcu(&dquot_srcu) to not drop dquot references while they
are used by other users. But dquot_transfer() breaks this assumption.
We call dquot_transfer() to drop the last reference of dquot and add
it to free_dquots, but there may still be other users using the dquot
at this time, as shown in the function graph below:

       cpu1              cpu2
_________________|_________________
wb_do_writeback         CHOWN(1)
...
  ext4_da_update_reserve_space
   dquot_claim_block
    ...
     dquot_mark_dquot_dirty // try to dirty old quota
      test_bit(DQ_ACTIVE_B, &dquot->dq_flags) // still ACTIVE
      if (test_bit(DQ_MOD_B, &dquot->dq_flags))
      // test no dirty, wait dq_list_lock
                    ...
                     dquot_transfer
                      __dquot_transfer
                      dqput_all(transfer_from) // rls old dquot
                       dqput // last dqput
                        dquot_release
                         clear_bit(DQ_ACTIVE_B, &dquot->dq_flags)
                        atomic_dec(&dquot->dq_count)
                        put_dquot_last(dquot)
                         list_add_tail(&dquot->dq_free, &free_dquots)
                         // add the dquot to free_dquots
      if (!test_and_set_bit(DQ_MOD_B, &dquot->dq_flags))
        add dqi_dirty_list // add released dquot to dirty_list

This can cause various issues, such as dquot being destroyed by
dqcache_shrink_scan() after being added to free_dquots, which can trigger
a UAF in dquot_mark_dquot_dirty(); or after dquot is added to free_dquots
and then to dirty_list, it is added to free_dquots again after
dquot_writeback_dquots() is executed, which causes the free_dquots list to
be corrupted and triggers a UAF when dqcache_shrink_scan() is called for
freeing dquot twice.

As Honza said, we need to fix dquot_transfer() to follow the guarantees
dquot_srcu should provide. But calling synchronize_srcu() directly from
dquot_transfer() is too expensive (and mostly unnecessary). So we add
dquot whose last reference should be dropped to the new global dquot
list releasing_dquots, and then queue work item which would call
synchronize_srcu() and after that perform the final cleanup of all the
dquots on releasing_dquots.

Fixes: 4580b30ea887 ("quota: Do not dirty bad dquots")
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Message-Id: <20230630110822.3881712-5-libaokun1@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

quota: add new helper dquot_active()

[ Upstream commit 33bcfafc48cb186bc4bbcea247feaa396594229e ]

Add new helper function dquot_active() to make the code more concise.

Signed-off-by: Baokun Li <libaokun1@huawei.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Message-Id: <20230630110822.3881712-4-libaokun1@huawei.com>
Stable-dep-of: dabc8b207566 ("quota: fix dqput() to follow the guarantees dquot_srcu should provide")
Signed-off-by: Sasha Levin <sashal@kernel.org>

quota: rename dquot_active() to inode_quota_active()

[ Upstream commit 4b9bdfa16535de8f49bf954aeed0f525ee2fc322 ]

Now we have a helper function dquot_dirty() to determine if dquot has
DQ_MOD_B bit. dquot_active() can easily be misunderstood as a helper
function to determine if dquot has DQ_ACTIVE_B bit. So we avoid this by
renaming it to inode_quota_active() and later on we will add the helper
function dquot_active() to determine if dquot has DQ_ACTIVE_B bit.

Signed-off-by: Baokun Li <libaokun1@huawei.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Message-Id: <20230630110822.3881712-3-libaokun1@huawei.com>
Stable-dep-of: dabc8b207566 ("quota: fix dqput() to follow the guarantees dquot_srcu should provide")
Signed-off-by: Sasha Levin <sashal@kernel.org>

quota: factor out dquot_write_dquot()

[ Upstream commit 024128477809f8073d870307c8157b8826ebfd08 ]

Refactor out dquot_write_dquot() to reduce duplicate code.

Signed-off-by: Baokun Li <libaokun1@huawei.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Message-Id: <20230630110822.3881712-2-libaokun1@huawei.com>
Stable-dep-of: dabc8b207566 ("quota: fix dqput() to follow the guarantees dquot_srcu should provide")
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: cs43130: Fix numerator/denominator mixup

[ Upstream commit a9e7c964cea4fb1541cc81a11d1b2fd135f4cf38 ]

In converting to using the standard u16_fract type, commit [1] made the
obvious mistake and failed to take account of the difference in
numerator and denominator ordering, breaking all uses of the cs43130
codec.

Fix it.

[1] commit e14bd35ef446 ("ASoC: cs43130: Re-use generic struct u16_fract")

Fixes: e14bd35ef446 ("ASoC: cs43130: Re-use generic struct u16_fract")
Signed-off-by: Phil Elwell <phil@raspberrypi.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230621153229.1944132-1-phil@raspberrypi.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/bridge: tc358764: Fix debug print parameter order

[ Upstream commit 7f947be02aab5b154427cb5b0fffe858fc387b02 ]

The debug print parameters were swapped in the output and they were
printed as decimal values, both the hardware address and the value.
Update the debug print to print the parameters in correct order, and
use hexadecimal print for both address and value.

Fixes: f38b7cca6d0e ("drm/bridge: tc358764: Add DSI to LVDS bridge driver")
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230615152817.359420-1-marex@denx.de
Signed-off-by: Sasha Levin <sashal@kernel.org>