re PR tree-optimization/64910 (tree reassociation results in poor code)

PR tree-optimization/64910
* tree-ssa-reassoc.c (reassociate_bb): Restrict last change to
cases where we have 3 or more operands.

From-SVN: r251751

Daily bump.

From-SVN: r251750

re PR middle-end/81768 (error: control flow in the middle of basic block)

PR middle-end/81768
* omp-low.c (lower_omp_for): Recompute tree invariant if
gimple_omp_for_initial/final is ADDR_EXPR.

* gcc.dg/gomp/pr81768-2.c: New test.

From-SVN: r251742

re PR middle-end/81768 (error: control flow in the middle of basic block)

PR middle-end/81768
* omp-expand.c (expand_omp_simd): Force second operands of COND_EXPR
into gimple val before gimplification fo the COND_EXPR.

* gcc.dg/gomp/pr81768-1.c: New test.

From-SVN: r251741

tree-ssa-threadupdate.c (duplicate_thread_path): Remove unused REGION_COPY argument.

* tree-ssa-threadupdate.c (duplicate_thread_path): Remove unused
REGION_COPY argument.
(thread_through_all_blocks): Remove unused argument to
duplicate_thread_path.

From-SVN: r251740

name-lookup.c (do_class_using_decl): Elide read-once temps.

* name-lookup.c (do_class_using_decl): Elide read-once temps.
Move declarations to initializations.

From-SVN: r251738

class.c (add_method): Move slot search and insertion to ...

* class.c (add_method): Move slot search and insertion to ...
* name-lookup.c (get_method_slot): ... this new function.
(lookup_fnfields_slot_nolazy): Cope with NULL slot.
* name-lookup.h (get_method_slot): Declare.
* decl.c (cxx_init_decl_processinng): Give conv_op_marker a more
realistic type.
(grok_special_member_properties): Set
TYPE_HAS_CONVERSION. Expicitly look at DECL_NAME for specialness.
Improve TYPE_HAS_CONSTEXPR_CTOR setting.

From-SVN: r251737

[75/77] Use scalar_mode in the AArch64 port

Similar to the previous scalar_int_mode patch.

2017-09-05  Richard Sandiford  <richard.sandiford@linaro.org>
    Alan Hayward  <alan.hayward@arm.com>
    David Sherwood  <david.sherwood@arm.com>

gcc/
* config/aarch64/aarch64-protos.h (aarch64_gen_adjusted_ldpstp):
Take a scalar_mode rather than a machine_mode.
(aarch64_operands_adjust_ok_for_ldpstp): Likewise.
* config/aarch64/aarch64.c (aarch64_simd_container_mode): Likewise.
(aarch64_operands_adjust_ok_for_ldpstp): Likewise.
(aarch64_gen_adjusted_ldpstp): Likewise.
(aarch64_expand_vector_init): Use scalar_mode instead of machine_mode.

Co-Authored-By: Alan Hayward <alan.hayward@arm.com>
Co-Authored-By: David Sherwood <david.sherwood@arm.com>
From-SVN: r251736

[61/77] Use scalar_int_mode in the AArch64 port

This patch makes the AArch64 port use scalar_int_mode in various places.
Other ports won't need this kind of change; we only need it for AArch64
because of the variable-sized SVE modes.

The only change in functionality is in the rtx_costs handling
of CONST_INT.  If the caller doesn't supply a mode, we now pass
word_mode rather than VOIDmode to aarch64_internal_mov_immediate.
aarch64_movw_imm will therefore not now truncate large constants
in this situation.

2017-09-05  Richard Sandiford  <richard.sandiford@linaro.org>
    Alan Hayward  <alan.hayward@arm.com>
    David Sherwood  <david.sherwood@arm.com>

gcc/
* config/aarch64/aarch64-protos.h (aarch64_is_extend_from_extract):
Take a scalar_int_mode instead of a machine_mode.
(aarch64_mask_and_shift_for_ubfiz_p): Likewise.
(aarch64_output_scalar_simd_mov_immediate): Likewise.
(aarch64_simd_scalar_immediate_valid_for_move): Likewise.
(aarch64_simd_attr_length_rglist): Delete.
* config/aarch64/aarch64.c (aarch64_is_extend_from_extract): Take
a scalar_int_mode instead of a machine_mode.
(aarch64_add_offset): Likewise.
(aarch64_internal_mov_immediate): Likewise
(aarch64_add_constant_internal): Likewise.
(aarch64_add_constant): Likewise.
(aarch64_movw_imm): Likewise.
(aarch64_rtx_arith_op_extract_p): Likewise.
(aarch64_mask_and_shift_for_ubfiz_p): Likewise.
(aarch64_simd_scalar_immediate_valid_for_move): Likewise.
Remove assert that the mode isn't a vector.
(aarch64_output_scalar_simd_mov_immediate): Likewise.
(aarch64_expand_mov_immediate): Update calls after above changes.
(aarch64_output_casesi): Use as_a <scalar_int_mode>.
(aarch64_and_bitmask_imm): Check for scalar integer modes.
(aarch64_move_imm): Likewise.
(aarch64_can_const_movi_rtx_p): Likewise.
(aarch64_strip_extend): Likewise.
(aarch64_extr_rtx_p): Likewise.
(aarch64_rtx_costs): Likewise, using wode_mode as the mode of
a CONST_INT when the mode parameter is VOIDmode.
(aarch64_float_const_rtx_p): Use scalar_int_mode for a temporary.

Co-Authored-By: Alan Hayward <alan.hayward@arm.com>
Co-Authored-By: David Sherwood <david.sherwood@arm.com>
From-SVN: r251735

cp-tree.h (lang_decl_base): Rename template_conv_p to unknown_bound_p.

* cp-tree.h (lang_decl_base): Rename template_conv_p to
unknown_bound_p.
(DECL_CONV_FN_P): Don't check NULL DECL_NAME.
(DECL_CONV_FN_TYPE): FN must be conv op.
(DECL_TEMPLATE_CONV_FN_P): Delete.
(VAR_HAD_UNKNOWN_BOUND, SET_VAR_HAD_UNKNOWN_BOUND): Adjust.
* pt.c (push_template_decl_real): Delete DECL_TEMPLATE_CONV_FN_P

From-SVN: r251734

Make bitsize_mode_for_mode return an opt_mode

2017-09-05  Richard Sandiford  <richard.sandiford@linaro.org>

gcc/
* machmode.h (bitwise_mode_for_mode): Return opt_mode.
* stor-layout.c (bitwise_mode_for_mode): Likewise.
(bitwise_type_for_mode): Update accordingly.

From-SVN: r251733

Make mode_for_size_tree return an opt_mode

...for consistency with mode_for_size

2017-09-05  Richard Sandiford  <richard.sandiford@linaro.org>

gcc/
* stor-layout.h (mode_for_size_tree): Return an opt_mode.
* stor-layout.c (mode_for_size_tree): Likewise.
(mode_for_array): Update accordingly.
(layout_decl): Likewise.
(compute_record_mode): Likewise.  Only set the mode once.

gcc/ada/
* gcc-interface/utils.c (make_packable_type): Update call to
mode_for_size_tree.

From-SVN: r251732

Make targetm.get_mask_mode return an opt_mode

...for consistency with mode_for_vector.

2017-09-05  Richard Sandiford  <richard.sandiford@linaro.org>

gcc/
* target.def (get_mask_mode): Change return type to opt_mode.
Expand commentary.
* doc/tm.texi: Regenerate.
* targhooks.h (default_get_mask_mode): Return an opt_mode.
* targhooks.c (default_get_mask_mode): Likewise.
* config/i386/i386.c (ix86_get_mask_mode): Likewise.
* optabs-query.c (can_vec_mask_load_store_p): Update use of
targetm.get_mask_mode.
* tree.c (build_truth_vector_type): Likewise.

From-SVN: r251731

Make mode_for_vector return an opt_mode

...following on from the mode_for_size change.  The patch also removes
machmode.h versions of the stor-layout.c comments, since the comments
in the .c file are more complete.

2017-09-05  Richard Sandiford  <richard.sandiford@linaro.org>

gcc/
* machmode.h (mode_for_vector): Return an opt_mode.
* stor-layout.c (mode_for_vector): Likewise.
(mode_for_int_vector): Update accordingly.
(layout_type): Likewise.
* config/i386/i386.c (emit_memmov): Likewise.
(ix86_expand_set_or_movmem): Likewise.
(ix86_expand_vector_init): Likewise.
(ix86_get_mask_mode): Likewise.
* config/powerpcspe/powerpcspe.c (rs6000_expand_vec_perm_const_1):
Likewise.
* config/rs6000/rs6000.c (rs6000_expand_vec_perm_const_1): Likewise.
* expmed.c (extract_bit_field_1): Likewise.
* expr.c (expand_expr_real_2): Likewise.
* optabs-query.c (can_vec_perm_p): Likewise.
(can_vec_mask_load_store_p): Likewise.
* optabs.c (expand_vec_perm): Likewise.
* targhooks.c (default_get_mask_mode): Likewise.
* tree-vect-stmts.c (vectorizable_store): Likewise.
(vectorizable_load): Likewise.
(get_vectype_for_scalar_type_and_size): Likewise.

From-SVN: r251730

Add mode_for_int_vector helper functions

There are at least a few places that want to create an integer vector
with a specified element size and element count, or to create the
integer equivalent of an existing mode.  This patch adds helpers
for doing that.

The require ()s are all used in functions that go on to emit
instructions that use the result as a vector mode.

2017-09-05  Richard Sandiford  <richard.sandiford@linaro.org>

gcc/
* machmode.h (mode_for_int_vector): New function.
* stor-layout.c (mode_for_int_vector): Likewise.
* config/aarch64/aarch64.c (aarch64_emit_approx_sqrt): Use it.
* config/powerpcspe/powerpcspe.c (rs6000_do_expand_vec_perm): Likewise.
* config/rs6000/rs6000.c (rs6000_do_expand_vec_perm): Likewise.
* config/s390/s390.c (s390_expand_vec_compare_cc): Likewise.
(s390_expand_vcond): Likewise.

From-SVN: r251729

Make mode_for_size return an opt_mode

...to make it consistent with int_mode_for_size etc.

require () seems like the right choice in replace_reg_with_saved_mem
because we use the chosen mode for saving and restoring registers,
which cannot be done in BLKmode.  Similarly require () seems like
the right choice in calls related to secondary memory reloads (the ones
in config/, and in get_secondary_mem) because the reload must always
have a defined mode, which e.g. determines the size of the slot.

We can use require () in simplify_subreg_concatn and assemble_integer
because it isn't meaningful to create a subreg with BLKmode (for one
thing, we couldn't tell then whether it was partial, paradoxical, etc.).

make_fract_type and make_accum_type must find a mode because that's
what distinguishes accumulator FIXED_POINT_TYPEs from fractional
FIXED_POINT_TYPEs.

2017-09-05  Richard Sandiford  <richard.sandiford@linaro.org>

gcc/
* machmode.h (opt_machine_mode): New type.
(opt_mode<T>): Allow construction from anything that can be
converted to a T.
(is_a, as_a, dyn_cast): Add overloads for opt_mode.
(mode_for_size): Return an opt_machine_mode.
* stor-layout.c (mode_for_size): Likewise.
(mode_for_size_tree): Update call accordingly.
(bitwise_mode_for_mode): Likewise.
(make_fract_type): Likewise.
(make_accum_type): Likewise.
* caller-save.c (replace_reg_with_saved_mem): Update call
accordingly.
* config/alpha/alpha.h (SECONDARY_MEMORY_NEEDED_MODE): Likewise.
* config/i386/i386.h (SECONDARY_MEMORY_NEEDED_MODE): Likewise.
* config/s390/s390.h (SECONDARY_MEMORY_NEEDED_MODE): Likewise.
* config/sparc/sparc.h (SECONDARY_MEMORY_NEEDED_MODE): Likewise.
* expmed.c (extract_bit_field_1): Likewise.
* reload.c (get_secondary_mem): Likewise.
* varasm.c (assemble_integer): Likewise.
* lower-subreg.c (simplify_subreg_concatn): Likewise.  Move
early-out.

From-SVN: r251728

(decimal_)float_mode_for_size in real.h

This patch makes the binary float macros in real.h use
float_mode_for_size and adds a corresponding decimal_float_mode_for_size
for the decimal macros.

2017-09-05  Richard Sandiford  <richard.sandiford@linaro.org>

gcc/
* machmode.h (decimal_float_mode_for_size): New function.
* real.h (REAL_VALUE_TO_TARGET_LONG_DOUBLE): Use float_mode_for_size.
(REAL_VALUE_TO_TARGET_DOUBLE): Likewise.
(REAL_VALUE_TO_TARGET_SINGLE): Likewise.
(REAL_VALUE_TO_TARGET_DECIMAL128): Use decimal_float_mode_for_size.
(REAL_VALUE_TO_TARGET_DECIMAL64): Likewise.
(REAL_VALUE_TO_TARGET_DECIMAL32): Likewise.

From-SVN: r251727

Make more use of int_mode_for_size

This patch converts more places that could use int_mode_for_size instead
of mode_for_size.  This is in preparation for an upcoming patch that
makes mode_for_size itself return an opt_mode.

require () seems like the right choice in expand_builtin_powi
because we have got past the point of backing out.  We go on to do:

  op1 = expand_expr (arg1, NULL_RTX, mode2, EXPAND_NORMAL);
  if (GET_MODE (op1) != mode2)
    op1 = convert_to_mode (mode2, op1, 0);

which would be invalid for (and have failed for) BLKmode.

In get_builtin_sync_mode and expand_ifn_atomic_compare_exchange,
the possible bitsizes are {8, 16, 32, 64, 128}, all of which give
target-independent integer modes (up to TImode).  The comment above
the call in get_builtin_sync_mode makes clear that an integer mode
must be found.

We can use require () in expand_builtin_atomic_clear and
expand_builtin_atomic_test_and_set because there's always an integer
mode for the boolean type.  The same goes for the POINTER_SIZE request
in layout_type.  Similarly we can use require () in combine_instructions
and gen_lowpart_common because there's always an integer mode for
HOST_BITS_PER_WIDE_INT (DImode when BITS_PER_UNIT == 8), and
HOST_BITS_PER_DOUBLE_INT (TImode).

The calls in aarch64_function_value, arm_function_value,
aapcs_allocate_return_reg and mips_function_value_1 are handling
cases in which a big-endian target passes or returns values at
the most significant end of a register.  In each case the ABI
constrains the size to a small amount and does not handle
non-power-of-2 sizes wider than a word.

The calls in c6x_expand_movmem, i386.c:emit_memset,
lm32_block_move_inline, microblaze_block_move_straight and
mips_block_move_straight are dealing with expansions of
block memory operations using register-wise operations,
and those registers must have non-BLK mode.

The reason for using require () in ix86_expand_sse_cmp,
mips_expand_ins_as_unaligned_store, spu.c:adjust_operand and
spu_emit_branch_and_set is that we go on to emit non-call
instructions that use registers of that mode, which wouldn't
be valid for BLKmode.

2017-09-05  Richard Sandiford  <richard.sandiford@linaro.org>

gcc/
* builtins.c (expand_builtin_powi): Use int_mode_for_size.
(get_builtin_sync_mode): Likewise.
(expand_ifn_atomic_compare_exchange): Likewise.
(expand_builtin_atomic_clear): Likewise.
(expand_builtin_atomic_test_and_set): Likewise.
(fold_builtin_atomic_always_lock_free): Likewise.
* calls.c (compute_argument_addresses): Likewise.
(emit_library_call_value_1): Likewise.
(store_one_arg): Likewise.
* combine.c (combine_instructions): Likewise.
* config/aarch64/aarch64.c (aarch64_function_value): Likewise.
* config/arm/arm.c (arm_function_value): Likewise.
(aapcs_allocate_return_reg): Likewise.
* config/c6x/c6x.c (c6x_expand_movmem): Likewise.
* config/i386/i386.c (construct_container): Likewise.
(ix86_gimplify_va_arg): Likewise.
(ix86_expand_sse_cmp): Likewise.
(emit_memmov): Likewise.
(emit_memset): Likewise.
(expand_small_movmem_or_setmem): Likewise.
(ix86_expand_pextr): Likewise.
(ix86_expand_pinsr): Likewise.
* config/lm32/lm32.c (lm32_block_move_inline): Likewise.
* config/microblaze/microblaze.c (microblaze_block_move_straight):
Likewise.
* config/mips/mips.c (mips_function_value_1) Likewise.
(mips_block_move_straight): Likewise.
(mips_expand_ins_as_unaligned_store): Likewise.
* config/powerpcspe/powerpcspe.c
(rs6000_darwin64_record_arg_advance_flush): Likewise.
(rs6000_darwin64_record_arg_flush): Likewise.
* config/rs6000/rs6000.c
(rs6000_darwin64_record_arg_advance_flush): Likewise.
(rs6000_darwin64_record_arg_flush): Likewise.
* config/sparc/sparc.c (sparc_function_arg_1): Likewise.
(sparc_function_value_1): Likewise.
* config/spu/spu.c (adjust_operand): Likewise.
(spu_emit_branch_or_set): Likewise.
(arith_immediate_p): Likewise.
* emit-rtl.c (gen_lowpart_common): Likewise.
* expr.c (expand_expr_real_1): Likewise.
* function.c (assign_parm_setup_block): Likewise.
* gimple-ssa-store-merging.c (encode_tree_to_bitpos): Likewise.
* reload1.c (alter_reg): Likewise.
* stor-layout.c (mode_for_vector): Likewise.
(layout_type): Likewise.

gcc/ada/
* gcc-interface/utils2.c (build_load_modify_store):
Use int_mode_for_size.

From-SVN: r251726

Make more use of int_mode_for_mode

This patch converts more places that could use int_mode_for_mode
instead of mode_for_size.  This is in preparation for an upcoming
patch that makes mode_for_size itself return an opt_mode.

The reason for using required () in exp2_immediate_p is that
we go on to do:

    trunc_int_for_mode (..., int_mode)

which would be invalid for (and have failed for) BLKmode.

The reason for using required () in spu_convert_move and
resolve_simple_move is that we go on to use registers of
the returned mode in non-call rtl instructions, which would
be invalid for BLKmode.

2017-09-05  Richard Sandiford  <richard.sandiford@linaro.org>

gcc/
* config/spu/spu.c (exp2_immediate_p): Use int_mode_for_mode.
(spu_convert_move): Likewise.
* lower-subreg.c (resolve_simple_move): Likewise.

From-SVN: r251725

class.c (unreverse_member_declarations): Remove extraneous if.

* class.c (unreverse_member_declarations): Remove extraneous if.
* pt.c (push_template_decl_real): Use string concatenation, not
\<newline>.  Add %<..%>.

From-SVN: r251724

re PR target/81833 (PowerPC: VSX: Miscompiles ffmpeg's scalarproduct_int16_vsx at -O1)

[gcc]

2017-09-05  Bill Schmidt  <wschmidt@linux.vnet.ibm.com>

PR target/81833
* config/rs6000/altivec.md (altivec_vsum2sws): Convert from a
define_insn to a define_expand.
(altivec_vsum2sws_direct): New define_insn.
(altivec_vsumsws): Convert from a define_insn to a define_expand.

[gcc/testsuite]

2017-09-05  Bill Schmidt  <wschmidt@linux.vnet.ibm.com>

PR target/81833
* gcc.target/powerpc/pr81833-1.c: New file.
* gcc.target/powerpc/pr81833-2.c: New file.

From-SVN: r251723

Improve max_insns_skipped logic

Improve the logic when setting max_insns_skipped.  Limit the maximum size of IT
to MAX_INSN_PER_IT_BLOCK as otherwise multiple IT instructions are needed,
increasing codesize.  Given 4 works well for Thumb-2, use the same limit for ARM
for consistency.

    gcc/
* config/arm/arm.c (arm_option_params_internal): Improve setting of
max_insns_skipped.

From-SVN: r251720

i386: Avoid stack realignment if possible

ix86_finalize_stack_frame_flags has been extended to eliminate frame
pointer when the new stack frame isn't needed with and without
-maccumulate-outgoing-args as well as -fomit-frame-pointer.  Since stack
access with larger alignment may be optimized out, to decide if stack
realignment is needed, we need to not only check for stack frame access,
but also verify the alignment of stack frame access.  Since alignment of
memory access via arg_pointer is set up by caller, not by callee, we
should find the maximum stack alignment from the stack frame access
instructions via stack pointer and frame pointrer to avoid stack
realignment when stack alignment needed is less than incoming stack
boundary.

gcc/

PR target/59501
PR target/81624
PR target/81769
* config/i386/i386.c (ix86_finalize_stack_frame_flags): Don't
realign stack if stack alignment needed is less than incoming
stack boundary.

gcc/testsuite/

PR target/59501
PR target/81624
PR target/81769
* gcc.target/i386/pr59501-4a.c: Remove xfail.
* gcc.target/i386/pr81769-1a.c: New test.
* gcc.target/i386/pr81769-1b.c: Likewise.
* gcc.target/i386/pr81769-2.c: Likewise.

From-SVN: r251718

re PR sanitizer/82072 (sanitizer does not detect an overflow from LLONG_MIN)

PR sanitizer/82072
* convert.c (convert_to_integer_1) <case NEGATE_EXPR>: Move the ubsan
check earlier.

* c-c++-common/ubsan/pr82072-2.c: New test.

From-SVN: r251717

re PR c++/81942 (ICE on empty constexpr constructor with C++14)

/cp
2017-09-05  Paolo Carlini  <paolo.carlini@oracle.com>

PR c++/81942
* cp-tree.h (LABEL_DECL_CDTOR): Add and document.
* decl.c (start_preparsed_function): Set LABEL_DECL_CDTOR when
creating cdtor_label.
* constexpr.c (returns): Add the case of a constructor/destructor
returning via a LABEL_DECL_CDTOR label.
(cxx_eval_constant_expression, case [GOTO_EXPR]): Likewise.

/testsuite
2017-09-05  Paolo Carlini  <paolo.carlini@oracle.com>

PR c++/81942
* g++.dg/cpp1y/constexpr-return3.C: New.

From-SVN: r251714

Improve alloca alignment

This patch improves alloca alignment.  Currently alloca reserves
too much space as it aligns twice, and generates unnecessary stack
alignment code.

When the requested alignment is lower than the stack alignment, no
extra alignment is needed.  If the requested alignment is higher,
we need to increase the size by the difference of the requested
alignment and the stack alignment.  As a result, the alloca alignment
is exactly as expected:

alloca (16):
sub sp, sp, #16
mov x1, sp

alloca (x):
add x0, x0, 15
and x0, x0, -16
sub sp, sp, x0
mov x0, sp

__builtin_alloca_with_align (x, 512):
add x0, x0, 63
and x0, x0, -16
sub sp, sp, x0
add x0, sp, 63
and x0, x0, -64

    gcc/
* explow.c (get_dynamic_stack_size): Improve dynamic alignment.

From-SVN: r251713

re PR c++/82084 (ICE: constructing wstring with -O3)

2017-09-05  Richard Biener  <rguenther@suse.de>

PR tree-optimization/82084
* fold-const.c (can_native_encode_string_p): Handle wide characters.

From-SVN: r251711

re PR ada/62235 (segmentation fault on Ada 2012 code)

PR ada/62235
* gcc-interface/decl.c (gnat_to_gnu_entity): Skip regular processing
for Itypes that are E_Record_Subtype with a cloned subtype.
<E_Record_Subtype>: Use the DECL of the cloned type directly, if any.

From-SVN: r251706

trans.c (convert_with_check): Use a custom base type if the base type of the expression has a different...

* gcc-interface/trans.c (convert_with_check): Use a custom base type
if the base type of the expression has a different machine mode.
Rename a couple of parameters and local variable.

From-SVN: r251705

trans.c (Attribute_to_gnu): Do not strip conversions around prefixes that are not references.

* gcc-interface/trans.c (Attribute_to_gnu) <Attr_Address>: Do not strip
conversions around prefixes that are not references.

From-SVN: r251704

utils.c (unchecked_convert): When the result type is a non-biased integral type with size 0...

* gcc-interface/utils.c (unchecked_convert): When the result type is a
non-biased integral type with size 0, set the result to 0 directly.

From-SVN: r251701

gigi.h (renaming_from_generic_instantiation_p): Turn to

* gcc-interface/gigi.h (renaming_from_generic_instantiation_p): Turn to
(renaming_from_instantiation_p): ...this.
* gcc-interface/decl.c (gnat_to_gnu_entity): Use inline predicate
instead of explicit tests on kind of entities.  Adjust for renaming.
(gnat_to_gnu_profile_type): Likewise.
(gnat_to_gnu_subprog_type): Likewise.
* gcc-interface/trans.c (Identifier_to_gnu): Likewise.
(Case_Statement_to_gnu): Likewise.
(gnat_to_gnu): Likewise.
(process_freeze_entity): Likewise.
(process_type): Likewise.
(add_stmt_with_node): Adjust for renaming.
* gcc-interface/utils.c (gnat_pushdecl): Adjust for renaming.
(renaming_from_generic_instantiation_p): Rename to...
(renaming_from_instantiation_p): ...this.  Use inline predicate.
(pad_type_hasher::keep_cache_entry): Fold.

From-SVN: r251700

trans.c (adjust_for_implicit_deref): New function.

* gcc-interface/trans.c (adjust_for_implicit_deref): New function.
(gnat_to_gnu) <N_Explicit_Dereference>: Translate result type first.
(N_Indexed_Component): Invoke adjust_for_implicit_deref on the prefix.
(N_Slice): Likewise.
(N_Selected_Component): Likewise.  Do not try again to translate it.
(N_Free_Statement): Invoke adjust_for_implicit_deref on the expression.

From-SVN: r251699

repinfo.ads: Document new treatment of dynamic values.

* repinfo.ads: Document new treatment of dynamic values.
(TCode): Bump upper bound to 29.
(Dynamic_Val): New constant set to 29.
* repinfo.adb (Print_Expr) <Dynamic_Val>: New case.
(Rep_Value)  <Dynamic_Val>: Likewise.
* repinfo.h (Dynamic_Val): New macro.
* gcc-interface/decl.c (annotate_value): Tidy up and cache result for
DECL_P nodes too.
<INTEGER_CST>: Set TCODE instead of recursing.
<COMPONENT_REF>: Set TCODE instead of calling Create_Node manually.
<VAR_DECL>: New case.
<MULT_EXPR, PLUS_EXPR>: Fold conversions into inner operations.
<BIT_AND_EXPR>: Adjust.
<CALL_EXPR>: Do not fall through.

From-SVN: r251698

trans.c (Call_to_gnu): If this is a function call and there is no target...

* gcc-interface/trans.c (Call_to_gnu): If this is a function call and
there is no target, do not create a temporary for the return value for
an allocator either.

From-SVN: r251695

re PR tree-optimization/82102 (ICE: Segmentation fault in /home/arnd/git/gcc/gcc/tree-ssa-pre.c:4863)

2017-09-05  Richard Biener  <rguenther@suse.de>

PR tree-optimization/82102
* tree-ssa-pre.c (fini_eliminate): Check if lhs is NULL.

* gcc.dg/torture/pr82102.c: New testcase.

From-SVN: r251692

trans.c (pos_to_constructor): Skip conversions to an unconstrained array type.

* gcc-interface/trans.c (pos_to_constructor): Skip conversions to an
unconstrained array type.

From-SVN: r251691

Learn CFG cleanup to transform single case switches to gcond.

2017-09-05  Martin Liska  <mliska@suse.cz>

PR tree-optimization/82032
* tree-cfg.c (generate_range_test): New function.
* tree-cfg.h (generate_range_test): Declared here.
* tree-cfgcleanup.c (convert_single_case_switch): New function.
(cleanup_control_expr_graph): Use it.
* tree-switch-conversion.c (try_switch_expansion): Remove
assert.
(emit_case_nodes): Use generate_range_test.
2017-09-05  Martin Liska  <mliska@suse.cz>

PR tree-optimization/82032
* g++.dg/other/pr82032.C: New test.
* gcc.dg/tree-ssa/pr68198.c: Update scanned pattern.
* gcc.dg/tree-ssa/vrp34.c: Likewise.
* gcc.dg/switch-10.c: Likewise.

From-SVN: r251690

Daily bump.

From-SVN: r251689

mpx-os-support.h: New file.

* gcc.target/i386/mpx/mpx-os-support.h: New file.
* gcc.target/i386/mpx/mpx-check.h: Include mpx-os-support.h.

From-SVN: r251683

re PR target/82098 (internal compiler error: in elimination_costs_in_insn, at reload1.c:3616, -march=i686)

PR target/82098
* config/i386/i386.md (*<btsc><mode>_mask): Add
TARGET_USE_BT to insn constraint.
(*btr<mode>_mask): Ditto.

From-SVN: r251682

Fix ldrd offsets

Fix the ldrd offsets of Thumb-2 - for TARGET_LDRD the range is +-1020,
without -252..4096.  This reduces the number of addressing instructions
when using DI mode operations (such as in PR77308).

    gcc/
* config/arm/arm.c (arm_legitimate_index_p): Add comment.
(thumb2_legitimate_index_p): Use correct range for DI/DF mode.

From-SVN: r251681

PR libstdc++/79162 implement LWG 2946 and LWG 2758

2017-09-04  Daniel Kruegler  <daniel.kruegler@gmail.com>

PR libstdc++/79162
Implement LWG 2946, LWG 2758's resolution missed further corrections
* include/bits/basic_string.h (basic_string::compare): Add missing
required noexcept specifications.
(basic_string): Introduce internal _S_to_string_view and __sv_wrapper
for implicit string_view conversion.
(basic_string::basic_string): Fix explicit string_view conversion by
implicit conversion using _S_to_string_view and __sv_wrapper.
(basic_string): Introduce internal basic_string(__sv_wrapper, Alloc)
constructor.
(basic_string): Fix operator=(T) template by operator=(const T&)
template for uncopyable types (PR 79162).
(basic_string::operator+=, basic_string::append, basic_string::assign)
(basic_string::insert, basic_string::replace, basic_string::find)
(basic_string::rfind, basic_string::find_first_of)
(basic_string::find_last_of, basic_string::find_first_not_of)
(basic_string::find_last_not_of, basic_string::compare): Replace
__sv_type argument by template const T& (LWG 2946) and correct
documentation describing __sv_type argument.
(basic_string::find, basic_string::rfind, basic_string::find_first_of)
(basic_string::find_last_of, basic_string::find_first_not_of)
(basic_string::find_last_not_of, basic_string::compare): Replace
unconditional noexcept specification by conditional noexcept
specification to partially balance the removal of noexcept by LWG 2946.
* testsuite/21_strings/basic_string/79162.cc: New.
* testsuite/21_strings/basic_string/lwg2946.cc: New.

From-SVN: r251664

re PR target/77308 (surprisingly large stack usage for sha512 on arm)

2017-09-04  Bernd Edlinger  <bernd.edlinger@hotmail.de>

        PR target/77308
        * config/arm/arm.md (*arm_adddi3, *arm_subdi3): Split early except for
        TARGET_NEON and TARGET_IWMMXT.
        (anddi3, iordi3, xordi3, one_cmpldi2): Split while expanding except for
        TARGET_NEON and TARGET_IWMMXT.
        (*one_cmpldi2_insn): Moved the body of one_cmpldi2 here.

testsuite:
2017-09-04  Bernd Edlinger  <bernd.edlinger@hotmail.de>

        PR target/77308
        * gcc.target/arm/pr77308-1.c: New test.

From-SVN: r251663

* config/i386/i386-protos.h (ix86_tls_address_pattern_p) New prototype.

(ix86_rewrite_tls_address): Ditto.
* config/i386/i386.c (ix86_tls_address_pattern_p) New function.
(ix86_rewrite_tls_address_1): Ditto.
(ix86_rewrite_tls_address): Ditto.
* config/i386/predicates.md (tls_address_pattern): New predicate.
* config/i386/i386.md (TLS address splitter): New splitter.

From-SVN: r251662

re PR c++/82084 (ICE: constructing wstring with -O3)

2017-09-04  Richard Biener  <rguenther@suse.de>

PR tree-optimization/82084
* fold-const.h (can_native_encode_string_p): Declare.
* fold-const.c (can_native_encode_string_p): Factor out from ...
(native_encode_string): ... here.
* tree-vect-stmts.c (vectorizable_store): Call it to avoid
vectorizing stores from constants we later cannot handle.

* g++.dg/torture/pr82084.C: New testcase.

From-SVN: r251661

re PR c/81783 (-Wtautological-compare could do better)

PR c/81783
* c-warn.c (warn_tautological_bitwise_comparison): New function.
(warn_tautological_cmp): Call it.

* doc/invoke.texi: Update -Wtautological-compare documentation.

* c-c++-common/Wtautological-compare-5.c: New test.

From-SVN: r251660

re PR tree-optimization/64910 (tree reassociation results in poor code)

2017-09-03  Jeff Law  <law@redhat.com>

PR tree-optimization/64910
* tree-ssa-reassoc.c (reassociate_bb): For bitwise binary ops,
swap the first and last operand if the last is a constant.

PR tree-optimization/64910
* gcc.dg/tree-ssa/pr64910-2.c: New test.

From-SVN: r251659

re PR sanitizer/82072 (sanitizer does not detect an overflow from LLONG_MIN)

PR sanitizer/82072
* convert.c (do_narrow): When sanitizing signed integer overflows,
bail out for signed types.
(convert_to_integer_1) <case NEGATE_EXPR>: Likewise.

* c-c++-common/ubsan/pr82072.c: New test.

From-SVN: r251651

re PR tree-optimization/82060 (ICE in refs_may_alias_p_1 with devirtualization enabled)

2017-09-04  Richard Biener  <rguenther@suse.de>

PR tree-optimization/82060
* tree-ssa-pre.c (eliminate_dom_walker::before_dom_children):
Move devirtualization after stmt folding and before EH/AB/noreturn
cleanup to get the stmt refs canonicalized.  Use a bool instead
of gimple_modified_p since that doesn't work for NOPs.  Schedule
NOPs generated by folding for removal.

* g++.dg/torture/pr82060.C: New testcase.

From-SVN: r251650

Turn FUNCTION_ARG_PADDING into a target hook

This involved renaming the rather general-sounding "enum direction" to
"enum pad_direction" to avoid a conflict with the Fortran frontend.

2017-09-04  Richard Sandiford  <richard.sandiford@linaro.org>
    Alan Hayward  <alan.hayward@arm.com>
    David Sherwood  <david.sherwood@arm.com>

gcc/
* coretypes.h (pad_direction): New enum.
* defaults.h (DEFAULT_FUNCTION_ARG_PADDING): Delete.
(FUNCTION_ARG_PADDING): Likewise.
* target.def (function_arg_padding): New hook.
* targhooks.h (default_function_arg_padding): Declare.
* targhooks.c (default_function_arg_padding): New function.
* doc/tm.texi.in (FUNCTION_ARG_PADDING): Replace with...
(TARGET_FUNCTION_ARG_PADDING): ...this.
* doc/tm.texi: Regenerate.
* calls.c (store_unaligned_arguments_into_pseudos): Use pad_direction
instead of direction.
(compute_argument_addresses): Likewise.
(load_register_parameters): Likewise.
(emit_library_call_value_1): Likewise.
(store_one_arg): Use targetm.calls.function_arg_padding instead
of FUNCTION_ARG_PADDING.
(must_pass_in_stack_var_size_or_pad): Likewise.
* expr.c (emit_group_load_1): Use pad_direction instead of direction.
(emit_group_store): Likewise.
(emit_single_push_insn_1): Use targetm.calls.function_arg_padding
instead of FUNCTION_ARG_PADDING.
(emit_push_insn): Likewise, and propagate enum change throughout
function.
* function.h (direction): Delete.
(locate_and_pad_arg_data::where_pad): Use pad_direction instead
of direction.
* function.c (assign_parm_find_stack_rtl): Likewise.
(assign_parm_setup_block_p): Likewise.
(assign_parm_setup_block): Likewise.
(gimplify_parameters): Likewise.
(locate_and_pad_parm): Use targetm.calls.function_arg_padding
instead of FUNCTION_ARG_PADDING, and propagate enum change throughout
function.
* config/aarch64/aarch64.h (FUNCTION_ARG_PADDING): Delete.
(BLOCK_REG_PADDING): Use pad_direction instead of direction.
* config/aarch64/aarch64-protos.h (aarch64_pad_arg_upward): Delete.
* config/aarch64/aarch64.c (aarch64_pad_arg_upward): Replace with...
(aarch64_function_arg_padding): ...this new function.
(aarch64_gimplify_va_arg_expr): Use pad_direction instead of direction.
(TARGET_FUNCTION_ARG_PADDING): Redefine.
* config/arm/arm.h (FUNCTION_ARG_PADDING): Delete.
(BLOCK_REG_PADDING): Use pad_direction instead of direction.
* config/arm/arm-protos.h (arm_pad_arg_upward): Delete.
* config/arm/arm.c (TARGET_FUNCTION_ARG_PADDING): Redefine.
(arm_pad_arg_upward): Replace with...
(arm_function_arg_padding): ...this new function.
* config/c6x/c6x.h (BLOCK_REG_PADDING): Use pad_direction instead
of direction.
* config/ia64/hpux.h (FUNCTION_ARG_PADDING): Delete.
* config/ia64/ia64-protos.h (ia64_hpux_function_arg_padding): Delete.
* config/ia64/ia64.c (TARGET_FUNCTION_ARG_PADDING): Redefine.
(ia64_hpux_function_arg_padding): Replace with...
(ia64_function_arg_padding): ...this new function.  Use pad_direction
instead of direction.  Check for TARGET_HPUX.
* config/iq2000/iq2000.h (FUNCTION_ARG_PADDING): Delete.
* config/iq2000/iq2000.c (TARGET_FUNCTION_ARG_PADDING): Redefine.
(iq2000_function_arg_padding): New function.
* config/mips/mips-protos.h (mips_pad_arg_upward): Delete.
* config/mips/mips.c (mips_pad_arg_upward): Replace with...
(mips_function_arg_padding): ...this new function.
(mips_pad_reg_upward): Update accordingly.
(TARGET_FUNCTION_ARG_PADDING): Redefine.
* config/mips/mips.h (PAD_VARARGS_DOWN): Use
targetm.calls.function_arg_padding.
(FUNCTION_ARG_PADDING): Delete.
(BLOCK_REG_PADDING): Use pad_direction instead of direction.
* config/nios2/nios2.h (FUNCTION_ARG_PADDING): Delete.
(PAD_VARARGS_DOWN): Use targetm.calls.function_arg_padding.
* config/nios2/nios2-protos.h (nios2_function_arg_padding): Delete.
(nios2_block_reg_padding): Return pad_direction instead of direction.
* config/nios2/nios2.c (nios2_block_reg_padding): Return pad_direction
instead of direction.
(nios2_function_arg_padding): Likewise.  Make static.
(TARGET_FUNCTION_ARG_PADDING): Redefine.
* config/pa/pa.h (FUNCTION_ARG_PADDING): Delete.
(BLOCK_REG_PADDING): Use targetm.calls.function_arg_padding.
* config/pa/pa-protos.h (pa_function_arg_padding): Delete.
* config/pa/pa.c (TARGET_FUNCTION_ARG_PADDING): Redefine.
(pa_function_arg_padding): Make static.  Return pad_direction instead
of direction.
* config/powerpcspe/powerpcspe.h (FUNCTION_ARG_PADDING): Delete.
(PAD_VARARGS_DOWN): Use targetm.calls.function_arg_padding.
* config/powerpcspe/aix.h (BLOCK_REG_PADDING): Use pad_direction
instead of direction.  Use targetm.calls.function_arg_padding.
* config/powerpcspe/darwin.h (BLOCK_REG_PADDING): Likewise.
* config/powerpcspe/freebsd64.h (BLOCK_REG_PADDING): Likewise.
* config/powerpcspe/linux64.h (BLOCK_REG_PADDING): Likewise.
* config/powerpcspe/powerpcspe-protos.h (function_arg_padding): Delete.
* config/powerpcspe/powerpcspe.c (TARGET_FUNCTION_ARG_PADDING):
Redefine.
(function_arg_padding): Rename to...
(rs6000_function_arg_padding): ...this.  Make static.  Return
pad_direction instead of direction.
(rs6000_return_in_msb): Use rs6000_function_arg_padding.
* config/rs6000/rs6000.h (FUNCTION_ARG_PADDING): Delete.
(PAD_VARARGS_DOWN): Use targetm.calls.function_arg_padding.
* config/rs6000/aix.h (BLOCK_REG_PADDING): Use pad_direction
instead of direction.  Use targetm.calls.function_arg_padding.
* config/rs6000/darwin.h (BLOCK_REG_PADDING): Likewise.
* config/rs6000/freebsd64.h (BLOCK_REG_PADDING): Likewise.
* config/rs6000/linux64.h (BLOCK_REG_PADDING): Likewise.
* config/rs6000/rs6000-protos.h (function_arg_padding): Delete.
* config/rs6000/rs6000.c (TARGET_FUNCTION_ARG_PADDING): Redefine.
(function_arg_padding): Rename to...
(rs6000_function_arg_padding): ...this.  Make static.  Return
pad_direction instead of direction.
(rs6000_return_in_msb): Use rs6000_function_arg_padding.
* config/s390/s390.h (FUNCTION_ARG_PADDING): Delete.
* config/s390/s390.c (s390_function_arg_padding): New function.
(TARGET_FUNCTION_ARG_PADDING): Redefine.
* config/sparc/sparc.h (FUNCTION_ARG_PADDING): Delete.
* config/sparc/sparc-protos.h (function_arg_padding): Delete.
* config/sparc/sparc.c (TARGET_FUNCTION_ARG_PADDING): Redefine.
(function_arg_padding): Rename to...
(sparc_function_arg_padding): ...this.  Make static.  Return
pad_direction instead of direction.
* config/spu/spu.h (FUNCTION_ARG_PADDING): Delete.
* config/spu/spu.c (spu_function_arg_padding): New function.
(TARGET_FUNCTION_ARG_PADDING): Redefine.
* system.h (FUNCTION_ARG_PADDING): Poison.

Co-Authored-By: Alan Hayward <alan.hayward@arm.com>
Co-Authored-By: David Sherwood <david.sherwood@arm.com>
From-SVN: r251648

Turn MODES_TIEABLE_P into a target hook

2017-09-04  Richard Sandiford  <richard.sandiford@linaro.org>
    Alan Hayward  <alan.hayward@arm.com>
    David Sherwood  <david.sherwood@arm.com>

gcc/
* target.def (modes_tieable_p): New hook.
* doc/tm.texi (MODES_TIEABLE_P): Replace with...
(TARGET_MODES_TIEABLE_P): ...this.
* doc/tm.texi.in: Regenerate.
* hooks.h (hook_bool_mode_mode_true): Declare.
* hooks.c (hook_bool_mode_mode_true): New function.
* combine.c (subst): Use targetm.modes_tieable_p instead of
MODES_TIEABLE_P.
* dse.c (find_shift_sequence): Likewise.
* expmed.c (extract_low_bits): Likewise.
* lower-subreg.c: Include target.h.
(find_decomposable_subregs): Use targetm.modes_tieable_p instead of
MODES_TIEABLE_P.
* rtlanal.c (rtx_cost): Likewise.
* config/aarch64/aarch64.h (MODES_TIEABLE_P): Delete.
* config/aarch64/aarch64-protos.h (aarch64_modes_tieable_p): Delete.
* config/aarch64/aarch64.c (aarch64_modes_tieable_p): Make static.
(TARGET_MODES_TIEABLE_P): Redefine.
* config/alpha/alpha.h (MODES_TIEABLE_P): Delete.
* config/alpha/alpha.c (alpha_modes_tieable_p): New function.
(TARGET_MODES_TIEABLE_P): Redefine.
* config/arc/arc.h (MODES_TIEABLE_P): Delete.
* config/arc/arc.c (TARGET_MODES_TIEABLE_P): Redefine.
(arc_modes_tieable_p): New function.
* config/arm/arm.h (MODES_TIEABLE_P): Delete.
* config/arm/arm-protos.h (arm_modes_tieable_p): Delete.
* config/arm/arm.c (TARGET_MODES_TIEABLE_P): Redefine.
(arm_modes_tieable_p): Make static.
* config/avr/avr.h (MODES_TIEABLE_P): Delete.
* config/bfin/bfin.h (MODES_TIEABLE_P): Delete.
* config/bfin/bfin.c (bfin_modes_tieable_p): New function.
(TARGET_MODES_TIEABLE_P): Redefine.
* config/c6x/c6x.h (MODES_TIEABLE_P): Delete.
* config/c6x/c6x.c (c6x_modes_tieable_p): New function.
(TARGET_MODES_TIEABLE_P): Redefine.
* config/cr16/cr16.h (MODES_TIEABLE_P): Delete.
* config/cr16/cr16.c (TARGET_MODES_TIEABLE_P): Redefine.
(cr16_modes_tieable_p): New function.
* config/cris/cris.h (MODES_TIEABLE_P): Delete.
* config/epiphany/epiphany.h (MODES_TIEABLE_P): Delete.
* config/fr30/fr30.h (MODES_TIEABLE_P): Delete.
(TRULY_NOOP_TRUNCATION): Update comment.
* config/frv/frv.h (MODES_TIEABLE_P): Delete.
(TRULY_NOOP_TRUNCATION): Update comment.
* config/frv/frv.c (TARGET_MODES_TIEABLE_P): Redefine.
(frv_modes_tieable_p): New function.
* config/ft32/ft32.h (MODES_TIEABLE_P): Delete.
* config/h8300/h8300.h (MODES_TIEABLE_P): Delete.
* config/h8300/h8300.c (h8300_modes_tieable_p): New function.
(TARGET_MODES_TIEABLE_P): Redefine.
* config/i386/i386.h (MODES_TIEABLE_P): Delete.
* config/i386/i386-protos.h (ix86_modes_tieable_p): Delete.
* config/i386/i386.c (ix86_modes_tieable_p): Make static.
(TARGET_MODES_TIEABLE_P): Redefine.
* config/ia64/ia64.h (MODES_TIEABLE_P): Delete.
* config/ia64/ia64.c (TARGET_MODES_TIEABLE_P): Redefine.
(ia64_modes_tieable_p): New function.
* config/iq2000/iq2000.h (MODES_TIEABLE_P): Delete.
* config/iq2000/iq2000.c (TARGET_MODES_TIEABLE_P): Redefine.
(iq2000_modes_tieable_p): New function.
* config/lm32/lm32.h (MODES_TIEABLE_P): Delete.
* config/lm32/lm32.c (TARGET_MODES_TIEABLE_P): Redefine.
(lm32_modes_tieable_p): New function.
* config/m32c/m32c.h (MODES_TIEABLE_P): Delete.
* config/m32c/m32c-protos.h (m32c_modes_tieable_p): Delete.
* config/m32c/m32c.c (m32c_modes_tieable_p): Make static.
(TARGET_MODES_TIEABLE_P): Redefine.
* config/m32r/m32r.h (MODES_TIEABLE_P): Delete.
* config/m32r/m32r.c (TARGET_MODES_TIEABLE_P): Redefine.
(m32r_modes_tieable_p): New function.
* config/m68k/m68k.h (MODES_TIEABLE_P): Delete.
* config/m68k/m68k.c (TARGET_MODES_TIEABLE_P): Redefine.
(m68k_modes_tieable_p): New function.
* config/mcore/mcore.h (MODES_TIEABLE_P): Delete.
* config/mcore/mcore.c (TARGET_MODES_TIEABLE_P): Redefine.
(mcore_modes_tieable_p): New function.
* config/microblaze/microblaze.h (MODES_TIEABLE_P): Delete.
* config/microblaze/microblaze.c (microblaze_modes_tieable_p): New
function.
(TARGET_MODES_TIEABLE_P): Redefine.
* config/mips/mips.h (MODES_TIEABLE_P): Delete.
* config/mips/mips-protos.h (mips_modes_tieable_p): Delete.
* config/mips/mips.c (mips_modes_tieable_p): Make static.
(TARGET_MODES_TIEABLE_P): Redefine.
* config/mmix/mmix.h (MODES_TIEABLE_P): Delete.
* config/mn10300/mn10300.h (MODES_TIEABLE_P): Delete.
* config/mn10300/mn10300-protos.h (mn10300_modes_tieable): Delete.
* config/mn10300/mn10300.c (mn10300_modes_tieable): Rename to...
(mn10300_modes_tieable_p): ...this and make static.
(TARGET_MODES_TIEABLE_P): Redefine.
* config/moxie/moxie.h (MODES_TIEABLE_P): Delete.
* config/msp430/msp430.h (MODES_TIEABLE_P): Delete.
* config/msp430/msp430-protos.h (msp430_modes_tieable_p): Delete.
* config/msp430/msp430.c (TARGET_MODES_TIEABLE_P): Redefine.
(msp430_modes_tieable_p): Make static.
* config/nds32/nds32.h (MODES_TIEABLE_P): Delete.
* config/nds32/nds32.c (nds32_modes_tieable_p): New function.
(TARGET_MODES_TIEABLE_P): Redefine.
* config/nios2/nios2.h (MODES_TIEABLE_P): Delete.
* config/nvptx/nvptx.h (MODES_TIEABLE_P): Delete.
* config/nvptx/nvptx.c (nvptx_modes_tieable_p): New function.
(TARGET_MODES_TIEABLE_P): Redefine.
* config/pa/pa.h (MODES_TIEABLE_P): Delete.
* config/pa/pa-protos.h (pa_modes_tieable_p): Delete.
* config/pa/pa.c (pa_modes_tieable_p): Make static.
(TARGET_MODES_TIEABLE_P): Redefine.
* config/pdp11/pdp11.h (MODES_TIEABLE_P): Delete.
* config/pdp11/pdp11.c (TARGET_MODES_TIEABLE_P): Redefine.
(pdp11_modes_tieable_p): New function.
* config/powerpcspe/powerpcspe.h (MODES_TIEABLE_P): Delete.
* config/powerpcspe/powerpcspe.c (TARGET_MODES_TIEABLE_P): Redefine.
(rs6000_modes_tieable_p): New function.
(rs6000_debug_reg_global): Use it instead of MODES_TIEABLE_P.
* config/powerpcspe/powerpcspe.md: Update comment.
* config/riscv/riscv.h (MODES_TIEABLE_P): Delete.
* config/riscv/riscv.c (riscv_modes_tieable_p): New function.
(TARGET_MODES_TIEABLE_P): Redefine.
* config/rl78/rl78.h (MODES_TIEABLE_P): Delete.
* config/rl78/rl78.c (TARGET_MODES_TIEABLE_P): Redefine.
(rl78_modes_tieable_p): New function.
* config/rs6000/rs6000.h (MODES_TIEABLE_P): Delete.
* config/rs6000/rs6000.c (TARGET_MODES_TIEABLE_P): Redefine.
(rs6000_modes_tieable_p): New function.
(rs6000_debug_reg_global): Use it instead of MODES_TIEABLE_P.
* config/rs6000/rs6000.md: Update comment.
* config/rx/rx.h (MODES_TIEABLE_P): Delete.
* config/rx/rx.c (rx_modes_tieable_p): New function.
(TARGET_MODES_TIEABLE_P): Redefine.
* config/s390/s390.h (MODES_TIEABLE_P): Delete.
* config/s390/s390.c (s390_modes_tieable_p): New function.
(TARGET_MODES_TIEABLE_P): Redefine.
* config/sh/sh.h (MODES_TIEABLE_P): Delete.
* config/sh/sh.c (TARGET_MODES_TIEABLE_P): Redefine.
(sh_modes_tieable_p): New function.
* config/sparc/sparc.h (MODES_TIEABLE_P): Delete.
* config/sparc/sparc-protos.h (sparc_modes_tieable_p): Delete.
* config/sparc/sparc.c (TARGET_MODES_TIEABLE_P): Redefine.
(sparc_modes_tieable_p): Make static.
* config/spu/spu.h (MODES_TIEABLE_P): Delete.
* config/spu/spu.c (spu_modes_tieable_p): New function.
(TARGET_MODES_TIEABLE_P): Redefine.
* config/stormy16/stormy16.h (MODES_TIEABLE_P): Delete.
* config/stormy16/stormy16.c (xstormy16_modes_tieable_p): New function.
(TARGET_MODES_TIEABLE_P): Redefine.
* config/tilegx/tilegx.h (MODES_TIEABLE_P): Delete.
* config/tilepro/tilepro.h (MODES_TIEABLE_P): Delete.
* config/v850/v850.h (MODES_TIEABLE_P): Delete.
* config/v850/v850.c (v850_modes_tieable_p): New function.
(TARGET_MODES_TIEABLE_P): Redefine.
* config/vax/vax.h (MODES_TIEABLE_P): Delete.
* config/visium/visium.h (MODES_TIEABLE_P): Delete.
* config/visium/visium.c (TARGET_MODES_TIEABLE_P): Redefine.
(visium_modes_tieable_p): New function.
* config/xtensa/xtensa.h (MODES_TIEABLE_P): Delete.
* config/xtensa/xtensa.c (TARGET_MODES_TIEABLE_P): Redefine.
(xtensa_modes_tieable_p): New function.
* system.h (MODES_TIEABLE_P): Poison.

Co-Authored-By: Alan Hayward <alan.hayward@arm.com>
Co-Authored-By: David Sherwood <david.sherwood@arm.com>
From-SVN: r251647

Turn HARD_REGNO_MODE_OK into a target hook

2017-09-04  Richard Sandiford  <richard.sandiford@linaro.org>
    Alan Hayward  <alan.hayward@arm.com>
    David Sherwood  <david.sherwood@arm.com>

gcc/
* target.def (hard_regno_mode_ok): New hook.
* doc/tm.texi (HARD_REGNO_MODE_OK): Replace with...
(TARGET_HARD_REGNO_MODE_OK): ...this.
* doc/tm.texi.in: Regenerate.
* hooks.h (hook_bool_uint_mode_true): Declare.
* hooks.c (hook_bool_uint_mode_true): New function.
* doc/md.texi: Refer to targetm.hard_regno_mode_ok instead of
HARD_REGNO_MODE_OK.
* genpreds.c (write_insn_preds_c): Add an include of target.h.
* alias.c (init_alias_target): Use targetm.hard_regno_mode_ok
instead of HARD_REGNO_MODE_OK.
* caller-save.c: Include target.h.
(reg_save_code): Use targetm.hard_regno_mode_ok instead of
HARD_REGNO_MODE_OK.
* combine.c (can_combine_p): Likewise.
(combinable_i3pat): Likewise.
(can_change_dest_mode): Likewise.
* expr.c (init_expr_target): Likewise.
(convert_move): Likewise.
(convert_modes): Likewise.
* ira.c (setup_prohibited_class_mode_regs): Likewise.
(setup_prohibited_mode_move_regs): Likewise.
* ira.h (target_ira): Likewise.
* lra-assigns.c (find_hard_regno_for_1): Likewise.
* lra-constraints.c (process_alt_operands): Likewise.
(split_reg): Likewise.
* recog.c (peep2_find_free_register): Likewise.
* ree.c (combine_reaching_defs): Likewise.
* regcprop.c (maybe_mode_change): Likewise.
* reginfo.c (init_reg_sets_1): Likewise.
(choose_hard_reg_mode): Likewise.
(simplifiable_subregs): Likewise.
* regrename.c (check_new_reg_p): Likewise.
* reload.c (find_valid_class): Likewise.
(find_valid_class_1): Likewise.
(reload_inner_reg_of_subreg): Likewise.
(push_reload): Likewise.
(combine_reloads): Likewise.
(find_dummy_reload): Likewise.
(find_reloads): Likewise.
* reload1.c (find_reg): Likewise.
(set_reload_reg): Likewise.
(allocate_reload_reg): Likewise.
(choose_reload_regs): Likewise.
(reload_adjust_reg_for_temp): Likewise.
* rtlanal.c (subreg_size_offset_from_lsb): Likewise.
(simplify_subreg_regno): Likewise.
* sel-sched.c (init_regs_for_mode): Likewise.
* varasm.c (make_decl_rtl): Likewise.
* config/aarch64/aarch64.h (HARD_REGNO_MODE_OK): Delete.
(MODES_TIEABLE_P): Use targetm.hard_regno_mode_ok instead of
HARD_REGNO_MODE_OK.
* config/aarch64/aarch64-protos.h (aarch64_hard_regno_mode_ok): Delete.
* config/aarch64/aarch64.c (aarch64_hard_regno_mode_ok): Make static.
(TARGET_HARD_REGNO_MODE_OK): Redefine.
* config/alpha/alpha.h (HARD_REGNO_MODE_OK): Delete.
* config/alpha/alpha.c (alpha_hard_regno_mode_ok): New function.
(TARGET_HARD_REGNO_MODE_OK): Redefine.
* config/arc/arc.h (arc_hard_regno_mode_ok): Delete.
(arc_mode_class): Delete.
(HARD_REGNO_MODE_OK): Delete.
* config/arc/arc.c (TARGET_HARD_REGNO_MODE_OK): Redefine.
(arc_hard_regno_mode_ok): Rename old array to...
(arc_hard_regno_mode_ok_modes): ...this.
(arc_conditional_register_usage): Update accordingly.
(arc_mode_class): Make static.
(arc_hard_regno_mode_ok): New function.
* config/arm/arm.h (HARD_REGNO_MODE_OK): Delete.
* config/arm/arm-protos.h (arm_hard_regno_mode_ok): Delete.
* config/arm/arm.c (TARGET_HARD_REGNO_MODE_OK): Redefine.
(arm_hard_regno_mode_ok): Make static.
* config/arm/arm.md (movdi): Use targetm.hard_regno_mode_ok instead of
HARD_REGNO_MODE_OK.
* config/avr/avr-protos.h (avr_hard_regno_mode_ok): Delete.
* config/avr/avr.h (HARD_REGNO_MODE_OK): Delete.
* config/avr/avr.c (avr_hard_regno_mode_ok): Make static and
return a bool.
(TARGET_HARD_REGNO_MODE_OK): Redefine.
* config/bfin/bfin-protos.h (hard_regno_mode_ok): Delete.
* config/bfin/bfin.h (HARD_REGNO_MODE_OK): Delete.
* config/bfin/bfin.c (hard_regno_mode_ok): Rename to...
(bfin_hard_regno_mode_ok): ...this.  Make static and return a bool.
(TARGET_HARD_REGNO_MODE_OK): Redefine.
* config/bfin/predicates.md (valid_reg_operand): Use
targetm.hard_regno_mode_ok instead of HARD_REGNO_MODE_OK.
* config/c6x/c6x.h (HARD_REGNO_MODE_OK): Delete.
* config/c6x/c6x.c (c6x_hard_regno_mode_ok): New function.
(TARGET_HARD_REGNO_MODE_OK): Redefine.
* config/cr16/cr16.h (HARD_REGNO_MODE_OK): Delete.
* config/cr16/cr16-protos.h (cr16_hard_regno_mode_ok): Delete.
* config/cr16/cr16.c (TARGET_HARD_REGNO_MODE_OK): Redefine.
(cr16_hard_regno_mode_ok): Make static and return a bool.
* config/cris/cris.h (HARD_REGNO_MODE_OK): Delete.
* config/cris/cris.c (TARGET_HARD_REGNO_MODE_OK): Redefine.
(cris_hard_regno_mode_ok): New function.
* config/epiphany/epiphany.h (epiphany_hard_regno_mode_ok): Delete.
(epiphany_mode_class): Delete.
(HARD_REGNO_MODE_OK): Delete.
* config/epiphany/epiphany-protos.h (hard_regno_mode_ok): Delete.
* config/epiphany/epiphany.c (TARGET_HARD_REGNO_MODE_OK): Redefine.
(hard_regno_mode_ok): Rename to...
(epiphany_hard_regno_mode_ok): ...this.  Make static and return a bool.
* config/fr30/fr30.h (HARD_REGNO_MODE_OK): Delete.
* config/fr30/fr30.md: Refer to targetm.hard_regno_mode_ok instead of
HARD_REGNO_MODE_OK.
* config/frv/frv.h (HARD_REGNO_MODE_OK): Delete.
* config/frv/frv-protos.h (frv_hard_regno_mode_ok): Delete.
* config/frv/frv.c (TARGET_HARD_REGNO_MODE_OK): Redefine.
(frv_hard_regno_mode_ok): Make static and return a bool.
* config/frv/frv.md: Refer to targetm.hard_regno_mode_ok instead of
HARD_REGNO_MODE_OK.
* config/ft32/ft32.h (HARD_REGNO_MODE_OK): Delete.
* config/h8300/h8300.h (HARD_REGNO_MODE_OK): Delete.
* config/h8300/h8300-protos.h (h8300_hard_regno_mode_ok): Delete.
* config/h8300/h8300.c (h8300_hard_regno_mode_ok): Make static
and return a bool.
(TARGET_HARD_REGNO_MODE_OK): Redefine.
* config/i386/i386.h (HARD_REGNO_MODE_OK): Delete.
* config/i386/i386-protos.h (ix86_hard_regno_mode_ok): Delete.
* config/i386/i386.c (ix86_hard_regno_mode_ok): Make static and
return a bool.
(TARGET_HARD_REGNO_MODE_OK): Redefine.
* config/ia64/ia64.h (HARD_REGNO_MODE_OK): Delete.
* config/ia64/ia64.c (TARGET_HARD_REGNO_MODE_OK): Redefine.
(ia64_hard_regno_mode_ok): New function.
* config/iq2000/iq2000.h (HARD_REGNO_MODE_OK): Delete.
* config/iq2000/iq2000.c (TARGET_HARD_REGNO_MODE_OK): Redefine.
(iq2000_hard_regno_mode_ok): New function.
* config/lm32/lm32.h (HARD_REGNO_MODE_OK): Delete.
* config/lm32/lm32.c (TARGET_HARD_REGNO_MODE_OK): Redefine.
(lm32_hard_regno_mode_ok): New function.
* config/m32c/m32c.h (HARD_REGNO_MODE_OK): Delete.
* config/m32c/m32c-protos.h (m32c_hard_regno_ok): Delete.
* config/m32c/m32c.c (class_can_hold_mode): Use m32c_hard_regno_mode_ok
instead of HARD_REGNO_MODE_OK.
(m32c_hard_regno_ok): Rename to...
(m32c_hard_regno_mode_ok): ...this.  Make static and return a bool.
(m32c_cannot_change_mode_class): Update accordingly.
(TARGET_HARD_REGNO_MODE_OK): Redefine.
* config/m32r/m32r.h (m32r_hard_regno_mode_ok): Delete.
(m32r_mode_class): Delete.
(HARD_REGNO_MODE_OK): Delete.
* config/m32r/m32r.c (TARGET_HARD_REGNO_MODE_OK): Redefine.
(m32r_hard_regno_mode_ok): Rename to...
(m32r_hard_regno_modes): ...this.
(m32r_mode_class): Make static.
(m32r_hard_regno_mode_ok): New function.
* config/m68k/m68k.h (HARD_REGNO_MODE_OK): Delete.
* config/m68k/m68k-protos.h (m68k_regno_mode_ok): Delete.
* config/m68k/m68k.c (TARGET_HARD_REGNO_MODE_OK): Redefine.
(m68k_hard_regno_mode_ok): Make static.
* config/mcore/mcore.h (HARD_REGNO_MODE_OK): Delete.
* config/mcore/mcore.c (TARGET_HARD_REGNO_MODE_OK): Redefine.
(mcore_hard_regno_mode_ok): New function.
* config/microblaze/microblaze.h (microblaze_hard_regno_mode_ok)
(HARD_REGNO_MODE_OK): Delete.
* config/microblaze/microblaze.c (microblaze_hard_regno_mode_ok):
Rename to...
(microblaze_hard_regno_mode_ok_p): ...this and make static.
(microblaze_hard_regno_mode_ok): New function.
(TARGET_HARD_REGNO_MODE_OK): Redefine.
* config/mips/mips.h (HARD_REGNO_MODE_OK): Delete.
(mips_hard_regno_mode_ok): Delete.
* config/mips/mips.c (mips_hard_regno_mode_ok): Rename to...
(mips_hard_regno_mode_ok_p): ...this and make static.
(mips_hard_regno_mode_ok_p): Rename to...
(mips_hard_regno_mode_ok_uncached): ...this.
(mips_hard_regno_mode_ok): New function.
(mips_class_max_nregs): Use mips_hard_regno_mode_ok instead
of HARD_REGNO_MODE_OK.
(mips_option_override): Update after above name changes.
(TARGET_HARD_REGNO_MODE_OK): Redefine.
* config/mmix/mmix.h (HARD_REGNO_MODE_OK): Delete.
* config/mn10300/mn10300.h (HARD_REGNO_MODE_OK): Delete.
* config/mn10300/mn10300-protos.h (mn10300_hard_regno_mode_ok): Delete.
* config/mn10300/mn10300.c (mn10300_hard_regno_mode_ok): Make static.
(TARGET_HARD_REGNO_MODE_OK): Redefine.
* config/moxie/moxie.h (HARD_REGNO_MODE_OK): Delete.
* config/msp430/msp430.h (HARD_REGNO_MODE_OK): Delete.
* config/msp430/msp430-protos.h (msp430_hard_regno_mode_ok): Delete.
* config/msp430/msp430.c (TARGET_HARD_REGNO_MODE_OK): Redefine.
(msp430_hard_regno_mode_ok): Make static and return a bool.
* config/nds32/nds32.h (HARD_REGNO_MODE_OK): Delete.
* config/nds32/nds32-protos.h (nds32_hard_regno_mode_ok): Delete.
* config/nds32/nds32.c (nds32_hard_regno_mode_ok): Make static
and return a bool.
(TARGET_HARD_REGNO_MODE_OK): Redefine.
* config/nios2/nios2.h (HARD_REGNO_MODE_OK): Delete.
* config/nvptx/nvptx.h (HARD_REGNO_MODE_OK): Delete.
* config/pa/pa.h (MODES_TIEABLE_P): Update commentary.
* config/pa/pa32-regs.h (HARD_REGNO_MODE_OK): Rename to...
(PA_HARD_REGNO_MODE_OK): ...this
* config/pa/pa64-regs.h (HARD_REGNO_MODE_OK): Rename to...
(PA_HARD_REGNO_MODE_OK): ...this.
* config/pa/pa.c (TARGET_HARD_REGNO_MODE_OK): Redefine.
(pa_hard_regno_mode_ok): New function.
* config/pdp11/pdp11.h (HARD_REGNO_MODE_OK): Delete.
* config/pdp11/pdp11.c (TARGET_HARD_REGNO_MODE_OK): Redefine.
(pdp11_hard_regno_mode_ok): New function.
* config/powerpcspe/powerpcspe.h (HARD_REGNO_MODE_OK): Delete.
* config/powerpcspe/powerpcspe-protos.h (rs6000_hard_regno_mode_ok_p):
Delete.
* config/powerpcspe/powerpcspe.c (rs6000_hard_regno_mode_ok_p):
Make static.
(TARGET_HARD_REGNO_MODE_OK): Redefine.
(rs6000_hard_regno_mode_ok): Rename to...
(rs6000_hard_regno_mode_ok_uncached): ...this.
(rs6000_init_hard_regno_mode_ok): Update accordingly.
(rs6000_hard_regno_mode_ok): New function.
* config/riscv/riscv.h (HARD_REGNO_MODE_OK): Delete.
* config/riscv/riscv-protos.h (riscv_hard_regno_mode_ok_p): Delete.
* config/riscv/riscv.c (riscv_hard_regno_mode_ok_p): Rename to...
(riscv_hard_regno_mode_ok): ...this and make static.
(TARGET_HARD_REGNO_MODE_OK): Redefine.
* config/rl78/rl78.h (HARD_REGNO_MODE_OK): Delete.
* config/rl78/rl78-protos.h (rl78_hard_regno_mode_ok): Delete.
* config/rl78/rl78.c (TARGET_HARD_REGNO_MODE_OK): Redefine.
(rl78_hard_regno_mode_ok): Make static and return bool.
* config/rs6000/rs6000.h (HARD_REGNO_MODE_OK): Delete.
* config/rs6000/rs6000-protos.h (rs6000_hard_regno_mode_ok_p):
Delete.
* config/rs6000/rs6000.c (rs6000_hard_regno_mode_ok_p): Make static.
(TARGET_HARD_REGNO_MODE_OK): Redefine.
(rs6000_hard_regno_mode_ok): Rename to...
(rs6000_hard_regno_mode_ok_uncached): ...this.
(rs6000_init_hard_regno_mode_ok): Update accordingly.
(rs6000_hard_regno_mode_ok): New function.
* config/rx/rx.h (HARD_REGNO_MODE_OK): Delete.
* config/rx/rx.c (rx_hard_regno_mode_ok): New function.
(TARGET_HARD_REGNO_MODE_OK): Redefine.
* config/s390/s390.h (HARD_REGNO_MODE_OK): Delete.
* config/s390/s390-protos.h (s390_hard_regno_mode_ok): Delete.
* config/s390/s390.c (s390_hard_regno_mode_ok): Make static.
(TARGET_HARD_REGNO_MODE_OK): Redefine.
* config/sh/sh.h (HARD_REGNO_MODE_OK): Delete.
* config/sh/sh-protos.h (sh_hard_regno_mode_ok): Delete.
* config/sh/sh.c (TARGET_HARD_REGNO_MODE_OK): Redefine.
(sh_hard_regno_mode_ok): Make static.
* config/sparc/constraints.md: Refer to targetm.hard_regno_mode_ok
instead of HARD_REGNO_MODE_OK.
* config/sparc/sparc.h (hard_regno_mode_classes): Delete.
(sparc_mode_class): Delete.
(HARD_REGNO_MODE_OK): Delete.
* config/sparc/sparc.c (TARGET_HARD_REGNO_MODE_OK): Redefine.
(hard_regno_mode_classes): Make static.
(sparc_mode_class): Likewise.
(sparc_hard_regno_mode_ok): New function.
* config/spu/spu.h (HARD_REGNO_MODE_OK): Delete.
* config/stormy16/stormy16.h (HARD_REGNO_MODE_OK): Delete.
* config/stormy16/stormy16.c (xstormy16_hard_regno_mode_ok): New
function.
(TARGET_HARD_REGNO_MODE_OK): Redefine.
* config/tilegx/tilegx.h (HARD_REGNO_MODE_OK): Delete.
* config/tilepro/tilepro.h (HARD_REGNO_MODE_OK): Delete.
* config/v850/v850.h (HARD_REGNO_MODE_OK): Delete.
* config/v850/v850.c (v850_hard_regno_mode_ok): New function.
(TARGET_HARD_REGNO_MODE_OK): Redefine.
* config/vax/vax.h (HARD_REGNO_MODE_OK): Delete.
* config/visium/visium.h (HARD_REGNO_MODE_OK): Delete.
* config/visium/visium.c (TARGET_HARD_REGNO_MODE_OK): Redefine.
(visium_hard_regno_mode_ok): New function.
* config/visium/visium.md: Refer to targetm.hard_regno_mode_ok
instead of HARD_REGNO_MODE_OK.
* config/xtensa/xtensa.h (xtensa_hard_regno_mode_ok): Delete.
(HARD_REGNO_MODE_OK): Delete.
* config/xtensa/xtensa.c (xtensa_hard_regno_mode_ok): Rename to...
(xtensa_hard_regno_mode_ok_p): ...this and make static.
(xtensa_option_override): Update accordingly.
(TARGET_HARD_REGNO_MODE_OK): Redefine.
(xtensa_hard_regno_mode_ok): New function.
* system.h (HARD_REGNO_MODE_OK): Poison.

Co-Authored-By: Alan Hayward <alan.hayward@arm.com>
Co-Authored-By: David Sherwood <david.sherwood@arm.com>
From-SVN: r251646

Turn HARD_REGNO_CALL_PART_CLOBBERED into a target hook

The SVE patches change the size of a machine_mode from a compile-time
constant to a runtime invariant.  However, target-specific code can
continue to treat the modes as constant-sized if the target only has
constant-sized modes.

The main snag with this approach is that target-independent code still
uses macros from the target .h file.  This patch is one of several that
converts a target macro to a hook.

2017-09-04  Richard Sandiford  <richard.sandiford@linaro.org>
    Alan Hayward  <alan.hayward@arm.com>
    David Sherwood  <david.sherwood@arm.com>

gcc/
* target.def (hard_regno_call_part_clobbered): New hook.
* doc/tm.texi.in (HARD_REGNO_CALL_PART_CLOBBERED): Replace with...
(TARGET_HARD_REGNO_CALL_PART_CLOBBERED): ...this hook.
* doc/tm.texi: Regenerate.
* hooks.h (hook_bool_uint_mode_false): Declare.
* hooks.c (hook_bool_uint_mode_false): New function.
* regs.h (HARD_REGNO_CALL_PART_CLOBBERED): Delete.
* cselib.c (cselib_process_insn): Use
targetm.hard_regno_call_part_clobbered instead of
HARD_REGNO_CALL_PART_CLOBBERED.
* ira-conflicts.c (ira_build_conflicts): Likewise.
* ira-costs.c (ira_tune_allocno_costs): Likewise.
* lra-constraints.c (need_for_call_save_p): Likewise.
* lra-lives.c: Include target.h.
(check_pseudos_live_through_calls): Use
targetm.hard_regno_call_part_clobbered instead of
HARD_REGNO_CALL_PART_CLOBBERED.
* regcprop.c: Include target.h.
(copyprop_hardreg_forward_1): Use
targetm.hard_regno_call_part_clobbered instead of
HARD_REGNO_CALL_PART_CLOBBERED.
* reginfo.c (choose_hard_reg_mode): Likewise.
* regrename.c (check_new_reg_p): Likewise.
* reload.c (find_equiv_reg): Likewise.
* reload1.c (emit_reload_insns): Likewise.
* sched-deps.c (deps_analyze_insn): Likewise.
* sel-sched.c (init_regs_for_mode): Likewise.
(mark_unavailable_hard_regs): Likewise.
* targhooks.c (default_dwarf_frame_reg_mode): Likewise.
* config/aarch64/aarch64.h (HARD_REGNO_CALL_PART_CLOBBERED): Delete.
* config/aarch64/aarch64.c (aarch64_hard_regno_call_part_clobbered):
New function.
(TARGET_HARD_REGNO_CALL_PART_CLOBBERED): Redefine.
* config/avr/avr.h (HARD_REGNO_CALL_PART_CLOBBERED): Delete.
* config/avr/avr-protos.h (avr_hard_regno_call_part_clobbered):
Delete.
* config/avr/avr.c (avr_hard_regno_call_part_clobbered): Make static
and return a bool.
(TARGET_HARD_REGNO_CALL_PART_CLOBBERED): Redefine.
* config/i386/i386.h (HARD_REGNO_CALL_PART_CLOBBERED): Delete.
* config/i386/i386.c (ix86_hard_regno_call_part_clobbered): New
function.
(TARGET_HARD_REGNO_CALL_PART_CLOBBERED): Redefine.
* config/mips/mips.h (HARD_REGNO_CALL_PART_CLOBBERED): Delete.
* config/mips/mips.c (mips_hard_regno_call_part_clobbered): New
function.
(TARGET_HARD_REGNO_CALL_PART_CLOBBERED): Redefine.
* config/powerpcspe/powerpcspe.h (HARD_REGNO_CALL_PART_CLOBBERED):
Delete.
* config/powerpcspe/powerpcspe.c
(rs6000_hard_regno_call_part_clobbered): New function.
(TARGET_HARD_REGNO_CALL_PART_CLOBBERED): Redefine.
* config/rs6000/rs6000.h (HARD_REGNO_CALL_PART_CLOBBERED): Delete.
* config/rs6000/rs6000.c (rs6000_hard_regno_call_part_clobbered):
New function.
(TARGET_HARD_REGNO_CALL_PART_CLOBBERED): Redefine.
* config/s390/s390.h (HARD_REGNO_CALL_PART_CLOBBERED): Delete.
* config/s390/s390.c (s390_hard_regno_call_part_clobbered): New
function.
(TARGET_HARD_REGNO_CALL_PART_CLOBBERED): Redefine.
* config/sh/sh.h (HARD_REGNO_CALL_PART_CLOBBERED): Delete.
* system.h (HARD_REGNO_CALL_PART_CLOBBERED): Poison.

Co-Authored-By: Alan Hayward <alan.hayward@arm.com>
Co-Authored-By: David Sherwood <david.sherwood@arm.com>
From-SVN: r251645

Add subreg_memory_offset helper functions

This patch adds routines for converting a SUBREG_BYTE offset into a
memory address offset.  The two only differ for paradoxical subregs,
where SUBREG_BYTE is always 0 but the memory address offset can be
negative.

2017-09-04  Richard Sandiford  <richard.sandiford@linaro.org>
    Alan Hayward  <alan.hayward@arm.com>
    David Sherwood  <david.sherwood@arm.com>

gcc/
* rtl.h (subreg_memory_offset): Declare.
* emit-rtl.c (subreg_memory_offset): New function.
* expmed.c (store_bit_field_1): Use it.
* expr.c (undefined_operand_subword_p): Likewise.
* simplify-rtx.c (simplify_subreg): Likewise.

Co-Authored-By: Alan Hayward <alan.hayward@arm.com>
Co-Authored-By: David Sherwood <david.sherwood@arm.com>
From-SVN: r251644

optabs: ensure atomic_load/stores have compiler barriers

PR rtl-optimization/57448
PR target/67458
PR target/81316
* optabs.c (expand_atomic_load): Place compiler memory barriers if
using atomic_load pattern.
(expand_atomic_store): Likewise.
testsuite/
* gcc.dg/atomic/pr80640-2.c: New testcase.
* gcc.dg/atomic/pr81316.c: New testcase.

From-SVN: r251643

Fix call arguments mismatch in gcc.c-torture/compile/pr82052.c

2017-09-04  Tom de Vries  <tom@codesourcery.com>

PR tree-optimization/82052
* gcc.c-torture/compile/pr82052.c (fn2): Add parameters corresponding to
call in fn11.

From-SVN: r251642

re PR sanitizer/81981 (-fsanitize=undefined makes a -Wmaybe-uninitialized warning disappear)

PR sanitizer/81981
* gimple-fold.c (gimple_fold_call): Optimize away useless UBSAN_PTR
and UBSAN_BOUNDS internal calls.  Clean up IFN_UBSAN_OBJECT_SIZE
handling.  Use replace_call_with_value with NULL instead of
gsi_replace, unlink_stmt_vdef and release_defs.

* gcc.dg/ubsan/pr81981.c: New test.

From-SVN: r251641

gdbhooks.py (OptMachineModePrinter.to_string): Use 8 spaces instead of tab.

* gdbhooks.py (OptMachineModePrinter.to_string): Use 8 spaces
instead of tab.

From-SVN: r251640

* lra-remat.c (reg_overlap_for_remat_p): Fix a pasto.

From-SVN: r251639

re PR tree-optimization/70043 (The compiler hangs in a fortran test-case with -Ofast -g -march=haswell)

PR tree-optimization/70043
PR testsuite/82093
* gfortran.dg/vect/pr70043.f90 (fn1): Start loop from 1 instead of 0.

From-SVN: r251638

PR82045: Avoid passing machine modes through "..."

PR82045 is about a bootstrap failure on sparc-sun-solaris2.11.
The problem was that we were passing the new machine_mode wrapper
classes through "..."  to emit_library_call(_value), which then
read them back as ints instead.

The simplest fix seemed to be replace "..." with an array of
rtx_mode_ts, then provide wrappers for the common cases.  This
bulks out rtl.h a bit, but it does make things a bit more typesafe.

2017-09-04  Richard Sandiford  <richard.sandiford@linaro.org>

gcc/
PR bootstrap/82045
* rtl.h (emit_library_call_value_1): Declare.
(emit_library_call): Replace declaration with a series of overloads.
Remove the parameter count argument.
(emit_library_call_value): Likewise.
* calls.c (emit_library_call_value_1): Make global.  Replace varargs
with an "rtx_mode_t *".
(emit_library_call_value): Delete.
(emit_library_call): Likewise.
* asan.c (asan_emit_stack_protection): Update calls accordingly.
(asan_emit_allocas_unpoison): Likewise.
* builtins.c (expand_builtin_powi): Likewise.
(expand_asan_emit_allocas_unpoison): Likewise.
* cfgexpand.c (expand_main_function): Likewise.
* config/aarch64/aarch64.c (aarch64_trampoline_init): Likewise.
* config/aarch64/aarch64.h (PROFILE_HOOK): Likewise.
* config/alpha/alpha.c (alpha_trampoline_init): Likewise.
* config/arm/arm.c (arm_trampoline_init): Likewise.
(arm_call_tls_get_addr): Likewise.
(arm_expand_divmod_libfunc): Likewise.
* config/bfin/bfin.md (umulsi3_highpart): Likewise.
(smulsi3_highpart): Likewise.
* config/c6x/c6x.c (c6x_initialize_trampoline): Likewise.
(c6x_expand_compare): Likewise.
(c6x_expand_movmem): Likewise.
* config/frv/frv.c (frv_trampoline_init): Likewise.
* config/i386/i386.c (ix86_trampoline_init): Likewise.
(ix86_expand_divmod_libfunc): Likewise.
* config/ia64/ia64.c (ia64_expand_tls_address): Likewise.
(ia64_expand_compare): Likewise.
(ia64_profile_hook): Likewise.
* config/ia64/ia64.md (save_stack_nonlocal): Likewise.
(nonlocal_goto): Likewise.
(restore_stack_nonlocal): Likewise.
* config/m32r/m32r.c (block_move_call): Likewise.
(m32r_trampoline_init): Likewise.
* config/m68k/linux.h (FINALIZE_TRAMPOLINE): Likewise.
* config/m68k/m68k.c (m68k_call_tls_get_addr): Likewise.
(m68k_call_m68k_read_tp): Likewise.
* config/microblaze/microblaze.c (microblaze_call_tls_get_addr)
(microblaze_expand_divide): Likewise.
* config/mips/mips.h (mips_args): Likewise.
* config/mips/sdemtk.h (mips_sync_icache): Likewise.
(MIPS_ICACHE_SYNC): Likewise.
* config/nios2/nios2.c (nios2_emit_expensive_div): Likewise.
(nios2_trampoline_init): Likewise.
* config/pa/pa.c (hppa_tls_call): Likewise.
(pa_trampoline_init): Likewise.
* config/pa/pa.md (canonicalize_funcptr_for_compare): Likewise.
* config/powerpcspe/powerpcspe.c (rs6000_legitimize_tls_address)
(expand_strn_compare): Likewise.
(rs6000_generate_compare): Likewise.
(rs6000_expand_float128_convert): Likewise.
(output_profile_hook): Likewise.
(rs6000_trampoline_init): Likewise.
* config/powerpcspe/powerpcspe.md (neg<mode>2): Likewise.
* config/riscv/riscv.h (PROFILE_HOOK): Likewise.
* config/rs6000/rs6000-string.c (expand_strn_compare): Likewise.
* config/rs6000/rs6000.c (rs6000_legitimize_tls_address): Likewise.
(rs6000_generate_compare): Likewise.
(rs6000_expand_float128_convert): Likewise.
(output_profile_hook): Likewise.
(rs6000_trampoline_init): Likewise.
* config/rs6000/rs6000.md (neg<mode>2): Likewise.
* config/sh/sh.c (sh_trampoline_init): Likewise.
* config/sparc/sparc.c (emit_soft_tfmode_libcall): Likewise.
(sparc_emit_float_lib_cmp): Likewise.
(sparc32_initialize_trampoline): Likewise.
(sparc64_initialize_trampoline): Likewise.
(sparc_profile_hook): Likewise.
* config/spu/spu.c (ea_load_store): Likewise.
* config/spu/spu.md (floatunssidf2): Likewise.
* config/tilegx/tilegx.c (tilegx_trampoline_init): Likewise.
* config/tilepro/tilepro.c (tilepro_trampoline_init): Likewise.
* config/visium/visium.c (expand_block_move_4): Likewise.
(expand_block_move_2): Likewise.
(expand_block_move_1): Likewise.
(expand_block_set_4): Likewise.
(expand_block_set_2): Likewise.
(expand_block_set_1): Likewise.
(visium_trampoline_init): Likewise.
(visium_profile_hook): Likewise.
* config/xtensa/xtensa.c (xtensa_expand_nonlocal_goto): Likewise.
(xtensa_setup_frame_addresses): Likewise.
(xtensa_trampoline_init): Likewise.
* except.c (sjlj_emit_function_enter): Likewise.
(sjlj_emit_function_exit): Likewise.
* explow.c (allocate_dynamic_stack_space): Likewise.
(probe_stack_range): Likewise.
* expr.c (convert_mode_scalar): Likewise.
* optabs.c (expand_binop): Likewise.
(expand_twoval_binop_libfunc): Likewise.
(expand_unop): Likewise.
(prepare_cmp_insn): Likewise.
(prepare_float_lib_cmp): Likewise.
(expand_float): Likewise.
(expand_fix): Likewise.
(expand_fixed_convert): Likewise.
(maybe_emit_sync_lock_test_and_set): Likewise.
(expand_atomic_compare_and_swap): Likewise.
(expand_mem_thread_fence): Likewise.
(expand_atomic_fetch_op): Likewise.

From-SVN: r251637

Daily bump.

From-SVN: r251633

adx-check.h (main): Use __get_cpuid_count.

* gcc.target/i386/adx-check.h (main): Use __get_cpuid_count.
* gcc.target/i386/bmi-check.h (main): Ditto.
* gcc.target/i386/bmi2-check.h (main): Ditto.
* gcc.target/i386/rtm-check.h (main): Ditto.
* gcc.target/i386/sha-check.h (main): Ditto.
* gcc.target/i386/avx2-check.h (check_osxsave): New function.
(main): Use __get_cpuid_count.  Use check_osxsave.
* gcc.target/i386/avx512-check.h (check_osxsave): New function.
(main): Use __get_cpuid_count.  Use check_osxsave.  Reorder conditions.
* gcc.target/i386/mpx/mpx-check.h (check_osxsave): New function.
(main): Use check_osxsave.

From-SVN: r251629

mpx-check.h (main): Use __get_cpuid_count and return NORUNRES on failure.

* gcc.target/i386/mpx/mpx-check.h (main): Use __get_cpuid_count
and return NORUNRES on failure.
* gcc.target/i386/mpx/va-arg-pack-1-lbv.c (foo1): Use
__builtin_va_arg_pack instead of __va_arg_pack.
* gcc.target/i386/mpx/va-arg-pack-1-nov.c (foo1): Ditto.
* gcc.target/i386/mpx/va-arg-pack-1-ubv.c (foo1): Ditto.
* gcc.target/i386/mpx/va-arg-pack-2-lbv.c (foo1): Ditto.
* gcc.target/i386/mpx/va-arg-pack-2-nov.c (foo1): Ditto.
* gcc.target/i386/mpx/va-arg-pack-2-ubv.c (foo1): Ditto.

From-SVN: r251627

generic.texi (OpenACC): Adjust URL.

* doc/generic.texi (OpenACC): Adjust URL.
* doc/invoke.texi (C Dialect Options): Ditto.

From-SVN: r251626

i386.md (*bt<mode>): Use nonimmediate_operand predicate for operand 1.

* config/i386/i386.md (*bt<mode>): Use nonimmediate_operand
predicate for operand 1.  Add (m,<S>) constraint.
(*jcc_bt<mode>): Use nonimmediate_operand predicate for operand 1.
Prevent memory operand 1 with register operand 2.

From-SVN: r251625

Daily bump.

From-SVN: r251624

Daily bump.

From-SVN: r251617

re PR libquadmath/81848 (Add PowerPC support to libquadmath)

2017-09-01  Michael Meissner  <meissner@linux.vnet.ibm.com>

PR libquadmath/81848
* configure.ac (powerpc*-linux*): Use attribute mode KC to create
complex __float128 on PowerPC instead of attribute mode TC.
* quadmath.h (__complex128): Likewise.
* configure: Regenerate.
* math/cbrtq.c (CBRT2): Use __float128 not long double.
(CBRT4): Likewise.
(CBRT2I): Likewise.
(CBRT4I): Likewise.
* math/j0q.c (U0): Likewise.
* math/sqrtq.c (sqrtq): Don't depend on implicit conversion
between __float128, instead explicitly convert the __float128
value to long double because the PowerPC does not allow __float128
and long double in the same expression.

From-SVN: r251613

cp-tree.h (resort_type_method_vec): Move declaration to ...

* cp-tree.h (resort_type_method_vec): Move declaration to ...
* name-lookup.h (resort_type_method_vec): ... here.
(set_class_bindings): Lose 2nd arg.
* class.c (finish_struct_1, finish_struct): Adjust
set_class_bindings call.  Don't call finish_struct_methods.
(resort_data, method_name_cmp, resort_method_name_cmp,
resort_type_method_vec, finish_struct_methods): Move to ...
* name-lookup.c (resort_data, method_name_cmp,
resort_method_name_cmp, resort_type_method_vec): ... here.
(set_class_bindings): Lose fields arg.  Swallow finish_struct_methods.

From-SVN: r251609

class.c (finish_struct): Call set_class_bindings for the template case too.

* class.c (finish_struct): Call set_class_bindings for the
template case too.

From-SVN: r251608

combine: Fix for PR82024

With the testcase in the PR, with all the command line options mentioned
there, a (comparison) instruction becomes dead in fwprop1 but is not
deleted until all the way in rtl_dce.

Before combine this insn look like:

20: flags:CC=cmp(r106:DI,0xffffffffffffffff)
      REG_DEAD r106:DI
      REG_UNUSED flags:CC
      REG_EQUAL cmp(0,0xffffffffffffffff)

(note the only output is unused).

Combining some earlier insns gives

13: r106:DI=0
14: r105:DI=r101:DI+r103:DI

14+13+20 then gives

(parallel [
        (set (reg:CC 17 flags)
            (compare:CC (const_int 0 [0])
                (const_int -1 [0xffffffffffffffff])))
        (set (reg:DI 105)
            (plus:DI (reg/v:DI 101 [ e ])
                (reg:DI 103)))
    ])

which doesn't match; but the set of flags is dead, so combine makes the
set of r105 the whole new instruction, which it then places at i3.  But
that is wrong, because r105 is used after i2 but before i3!  We forget
to check for that in this case.

This patch fixes it.

PR rtl-optimization/82024
* combine.c (try_combine): If the combination result is a PARALLEL,
and we only need to retain the SET in there that would be placed
at I2, check that we can place that at I3 instead, before doing so.

From-SVN: r251607

re PR target/81766 (ICE in maybe_add_or_update_dep_1, at sched-deps.c:924 caused by r250815)

PR target/81766
* config/i386/i386.c (ix86_init_large_pic_reg): Return label instead of void.
(ix86_init_pic_reg): Remember label from ix86_init_large_pic_reg, if non-NULL
and preceded by NOTE_INSN_BASIC_BLOCK, swap the note and label.

* gcc.target/i386/pr81766.c: New test.

From-SVN: r251606

c-opts.c (c_common_finish): Write dependency information even if there are errors.

* c-opts.c (c_common_finish): Write dependency information even if
there are errors.

From-SVN: r251605

class.c (finish_struct_methods): Done clear DECL_IN_AGGR_P here.

* class.c (finish_struct_methods): Done clear DECL_IN_AGGR_P here.
Don't call maybe_warn_about_overly_private_class here.
(warn_hidden): Cleanup declarations and comments.
(type_has_user_provided_constructor): No need to check
CLASSTYPE_METHOD_VEC.
(type_has_user_provided_or_explicit_constructor): Likewise.
(classtype_has_move_assign_or_move_ctor_p): Likewise.
(check_bases_and_members): Don't call finish_struct_methods here.
(finish_struct_1): Call finish_struct_methods and
set_class_bindings immediately after layout.  Clear DECL_IN_AGGR_P
here.
(finish_struct): For templates process USING_DECLS and clear
DECL_IN_AGGR_P before calling finish_struct_methods. Call
maybe_warn_about_overly_private_class here.

From-SVN: r251604

Fix excess precision handling of compound assignments (PR c/82071).

PR c/82071 reports how compound assignment operators such as += handle
excess precision inconsistently with the same operation done with a
plain assignment and binary operator.

There were (at least) two problems with how compound assignments
handled excess precision.  The EXCESS_PRECISION_EXPR for an argument
with excess precision was removed too early, resulting in
build_binary_op being called with an rhs operand whose type reflected
the evaluation format, so not having sufficient information to achieve
the intended semantics in all cases, and then the code called
c_fully_fold on the results of build_binary_op without allowing for
the possibility of an EXCESS_PRECISION_EXPR as the result, so leading
to double rounding of the result (first to its semantic type, then to
the type of the LHS of the assignment) instead of the intended single
rounding.

This patch fixes those problems by keeping EXCESS_PRECISION_EXPRs
further through build_modify_expr (and build_atomic_assign which it
calls) and only removing them locally where appropriate.

Note that while this patch should achieve *consistency*, that's
consistency with the understanding of C99 semantics that I originally
intended to implement.  For the particular case in the testcase, C11
semantics (from N1531) differ from that understanding of C99
semantics, in that an implicit conversion of an integer to floating
point can have excess precision.  I intend to implement those C11
semantics separately (conditional on flag_isoc11) (which will also
mean that building conditional expressions can produce a result with
excess precision even when the arguments lack excess precision, where
previously it could not), and not to close the bug until that is also
done.

Tested for x86_64-pc-linux-gnu.

PR c/82071
gcc/c:
* c-typeck.c (build_atomic_assign): Handle argument with excess
precision.  Ensure any EXCESS_PRECISION_EXPR is present in
argument passed to build_binary_op and convert_for_assignment but
not for call to c_fully_fold.
(build_modify_expr): Do not remove EXCESS_PRECISION_EXPR early.
Ensure build_binary_op is called with argument with original
semantic type.  Avoid calling c_fully_fold with an
EXCESS_PRECISION_EXPR from build_binary_op.

gcc/testsuite:
* gcc.target/i386/excess-precision-7.c: New test.

From-SVN: r251603

varasm.c (bss_initializer_p): Do not put constants into .bss

* varasm.c (bss_initializer_p): Do not put constants into .bss
(categorize_decl_for_section): Handle bss_initializer_p returning
false when DECL_INITIAL is NULL.

* gcc.target/i386/const-in-bss.c: New test.

From-SVN: r251602

S/390: PR82012: Implement CAN_INLINE_P target hook.

TARGET_CAN_INLINE_P must be implemented when supporting target
attributes.

gcc/ChangeLog:

2017-09-01  Andreas Krebbel  <krebbel@linux.vnet.ibm.com>

PR target/82012
* config/s390/s390.c (s390_can_inline_p): New function.

gcc/testsuite/ChangeLog:

2017-09-01  Andreas Krebbel  <krebbel@linux.vnet.ibm.com>

PR target/82012
* gcc.target/s390/target-attribute/pr82012.c: New test.

From-SVN: r251601

re PR tree-optimization/82052 (ICE with "-O3 -m32" on x86_64-linux-gnu (internal compiler error: in pop_to_marker, at tree-ssa-scopedtables.c:71))

PR tree-optimization/82052
* tree-ssa-scopedtables.c (avail_exprs_stack::lookup_avail_expr):
Always initialize the returned slot after a hash table miss
when INSERT is true.

PR tree-optimization/82052
* gcc.c-torture/compile/pr82052.c: New test.

From-SVN: r251600

retire mem_signal_fence pattern

* config/s390/s390.md (mem_signal_fence): Remove.
* doc/md.texi (mem_signal_fence): Remove.
* optabs.c (expand_mem_signal_fence): Remove uses of mem_signal_fence.
Update comments.
* target-insns.def (mem_signal_fence): Remove.

From-SVN: r251597

re PR sanitizer/81902 (new -fsanitize=pointer-overflow option undocumented)

PR sanitizer/81902
* doc/invoke.texi: Document -fsanitize=pointer-overflow.

From-SVN: r251596

re PR sanitizer/81923 ([ASAN] gcc emites wrong odr asan instrumentation for glibc)

PR sanitizer/81923
* asan.c (create_odr_indicator): Strip name encoding from assembler
name before appending it after __odr_asan_.

* gcc.dg/asan/pr81923.c: New test.

From-SVN: r251595

config.host (*-*-vxworks7): Widen scope to vxworks7*.

2017-09-01  Olivier Hainque  <hainque@adacore.com>

libgcc/
* config.host (*-*-vxworks7): Widen scope to vxworks7*.

From-SVN: r251594

Revert 2017-08-28 Nathan Sidwell <nathan@acm.org> Restore sorted_fields vector.

Revert 2017-08-28  Nathan Sidwell  <nathan@acm.org>
Restore sorted_fields vector.
* cp-tree.h (lang_type): Restore sorted_fields vector.
(CLASSTYPE_SORTED_FIELDS): Restore.
(CLASSTYPE_BINDINGS): Delete.
* name-lookup.c (lookup_field_1): Restore binary search.
(sorted_fields_type_new, count_fields,
add_fields_to_record_type, add_enum_fields_to_record_type): Restore
(set_class_bindings): Revert.
(insert_late_enum_def_binding): Restore field_vec insertion.

From-SVN: r251592

Fix profile update in tree-ssa-isolate-paths.c (PR tree-optimization/82059).

2017-09-01  Martin Liska  <mliska@suse.cz>

PR tree-optimization/82059
* gimple-ssa-isolate-paths.c (isolate_path): Add profile and
frequency only when an edge is redirected.
2017-09-01  Martin Liska  <mliska@suse.cz>

PR tree-optimization/82059
* gcc.dg/tree-ssa/pr82059.c: New test.

From-SVN: r251591

[ARC] Reimplement ZOL support.

2017-05-22  Claudiu Zissulescu <claziss@synopsys.com>

* config/arc/arc-c.c (__ARC_LPC_WIDTH__): Add builtin define.
* config/arc/arc.c (ARC_MAX_LOOP_LENGTH): Define.
(arc_conditional_register_usage): Remove ARC600 lp_count
exception.
(arc_file_start): Emit Tag_ARC_CPU_variation.
(arc_can_use_doloop_p): New conditions to use ZOLs.
(hwloop_fail): New function.
(hwloop_optimize): Likewise.
(hwloop_pattern_reg): Likewise.
(arc_doloop_hooks): New struct, to be used with reorg_loops.
(arc_reorg_loops): New function, calls reorg_loops.
(arc_reorg): Call arc_reorg_loops.  Remove old ZOL handling.
(arc600_corereg_hazard): Remove ZOL checking, case handled by
hwloop_optimize.
(arc_loop_hazard): Remove function, functionality moved into
hwloop_optimize.
(arc_hazard): Remove arc_loop_hazard call.
(arc_adjust_insn_length): Remove ZOL handling, functionality moved
into hwloop_optimize.
(arc_label_align): Remove ZOL handling.
* config/arc/arc.h (LOOP_ALIGN): Changed to 0.
* config/arc/arc.md (doloop_begin): Remove pattern.
(doloop_begin_i): Likewise.
(doloop_end_i): Likewise.
(doloop_fallback): Likewise.
(doloop_fallback_m): Likewise.
(doloop_end): Reimplement expand.
(arc_lp): New pattern for LP instruction.
(loop_end): New pattern.
(loop_fail): Likewise.
(decrement_and_branch_until_zero): Likewise.
* config/arc/arc.opt (mlpc-width): New option.
* doc/invoke.texi (mlpc-width): Document option.

testsuite/
2017-05-22  Claudiu Zissulescu <claziss@synopsys.com>

      * gcc.target/arc/loop-1.c: Deleted.

From-SVN: r251589

[ARC] Fix errors in arc_ifcvt.

The arc_ifcvt procedure is removing a label even when it is used by
another jump.  This patch fixes dg.exp/pr31507-1.c.

gcc/
2017-07-10  Claudiu Zissulescu  <claziss@synopsys.com>

* config/arc/arc.c (arc_ifcvt): Remove use of merge_blocks call.
(arc_ccfsm_advance): Fix checking for delay slots.
(arc_reorg): Add rtl dump after each call to arc_ifcvt

From-SVN: r251588

[ARC] Update various patterns

gcc/
2017-04-25  Claudiu Zissulescu  <claziss@synopsys.com>

* config/arc/arc.md (movqi_insn): Add stores to save constant long
immediates.
(movhi_insn): Update store instruction constraint which are saving
6-bit short immediates.
(movsi_insn): Consider also short scaled load operations.
(zero_extendhisi2_i): Use Usd constraint instead of T.
(extendhisi2_i): Add q constraint.
(arc_clzsi2): Add type and length attributes.
(arc_ctzsi2): Likewise.
* config/arc/constraints.md (Usc): Update constraint, the
assembler can parse two relocations for a single instruction.

gcc/testsuite/
2017-04-25  Claudiu Zissulescu  <claziss@synopsys.com>

* gcc.target/arc/arc.exp: Test also cpp files.
* gcc.target/arc/tdelay_slots.cpp: New test.

From-SVN: r251587

[ARC] Use TARGET_USE_ANCHORS_FOR_SYMBOL_P.

We don't want to use anchors for small data: the GP register acts as an anchor in that
case.  We also don't want to use them for PC-relative accesses,
where the PC acts as an anchor.  TLS symbols require special accesses as well, don't use
anchors for such symbols.

gcc/
2017-04-28  Claudiu Zissulescu  <claziss@synopsys.com>

* config/arc/arc.c (arc_use_anchors_for_symbol_p): New function.
(TARGET_USE_ANCHORS_FOR_SYMBOL_P): Define.

gcc/testsuite
2017-04-28  Claudiu Zissulescu  <claziss@synopsys.com>

* gcc.target/arc/pr9001184797.c: New test.

From-SVN: r251586

re PR c/81887 (pragma omp ordered simd ignored under -fopenmp-simd)

PR c/81887
c-family/
* c-pragma.c (omp_pragmas): Move "ordered" entry from here to ...
(omp_pragmas_simd): ... here.
* c-omp.c (c_finish_omp_ordered): If clauses isn't simd clause alone,
create new clauses list containing just simd clause.
c/
* c-parser.c (c_parser_omp_ordered): Handle -fopenmp-simd.
cp/
* parser.c (cp_parser_omp_ordered): Handle -fopenmp-simd.
fortran/
* parse.c (decode_omp_directive): Use matchs instead of matcho for
end ordered and ordered directives, except for ordered depend.  For
-fopenmp-simd and ordered depend, reject the stmt.
* trans-openmp.c (gfc_trans_omp_ordered): For -fopenmp-simd ignore
threads clause and if simd clause isn't present, just translate the
body.
testsuite/
* c-c++-common/gomp/pr81887.c: New test.
* gfortran.dg/gomp/pr81887.f90: New test.

From-SVN: r251585

Fix warning for simple-object-elf.c.

2017-09-01  Martin Liska  <mliska@suse.cz>

* simple-object-elf.c (simple_object_elf_copy_lto_debug_sections):
Remove duplicite declaration.

From-SVN: r251584

re PR c++/82040 (ICE with -Wbool-operation and ~)

PR c++/82040
* typeck.c (cp_build_unary_op): Avoid re-entering reporting routines.

* g++.dg/warn/Wbool-operation-1.C: New test.

From-SVN: r251581

Daily bump.

From-SVN: r251580

mksysinfo: fix in6_addr in mld_hdr_t for Solaris

    Patch by Rainer Orth.

    Reviewed-on: https://go-review.googlesource.com/60732

From-SVN: r251574

config.gcc (powerpc-wrs-vxworks|vxworksae|vxworksmils): Now match as powerpc-wrs-vxworks*.

2017-08-31  Olivier Hainque  <hainque@adacore.com>

       gcc/
       * config.gcc (powerpc-wrs-vxworks|vxworksae|vxworksmils): Now
match as powerpc-wrs-vxworks*.

       libgcc/
       * config.host: Likewise.

From-SVN: r251573

PR c++/82039 suppress -Wzero-as-null-pointer-constant warning

PR c++/82039
* include/ext/new_allocator.h (__gnu_cxx::new_allocator::allocate):
Adjust null pointer constant to avoid warning.

From-SVN: r251570

[AArch64 obvious] Fix register constraints for aarch64_ml[as]_elt_merge<mode>

The MLA by-element instructions have the same restriction as other by-element
instructions whereby the forms operating on vectors of 16-bit integer data
may only use registers v0-v15. We have an iterator for that, applied to the
other patterns generating this instruction, so use that.

gcc/

* config/aarch64/aarch64-simd.md (aarch64_mla_elt_merge<mode>): Fix
register constraint for by-element operand.
(aarch64_mls_elt_merge<mode>): Likewise.

From-SVN: r251568

PR c++/82029 - __PRETTY_FUNCTION__ in lambda in template

* pt.c (enclosing_instantiation_of, lambda_fn_in_template_p)
(regenerated_lambda_fn_p): New.
(tsubst_decl) [VAR_DECL]: Use enclosing_instantiation_of.
(tsubst_copy) [VAR_DECL]: Likewise.

From-SVN: r251567

[ARC] Update can_follow_jump hook helper.

Short branches cannot be used to jump between hot/cold
sections. Update the hook.

gcc/
2017-04-26  Claudiu Zissulescu  <claziss@synopsys.com>

* config/arc/arc.c (arc_can_follow_jump): Check for short
branches.

From-SVN: r251566