Florin Apostol [Sat, 24 Oct 2015 15:43:59 +0000 (16:43 +0100)]
uri: tests: added unit test for streams ending in .. without following /
https://bugzilla.gnome.org/show_bug.cgi?id=757065
Vivia Nikolaidou [Mon, 19 Oct 2015 13:50:51 +0000 (16:50 +0300)]
segment: Correct stream_time calc for negative applied rate
Updated gst_segment_position_from_stream_time and gst_segment_to_stream_time to reflect correct calculations for the case when the applied rate is negative.
Pasting from design docs:
===============================
Stream time is calculated using the buffer times and the preceding SEGMENT
event as follows:
stream_time = (B.timestamp - S.start) * ABS (S.applied_rate) + S.time
For negative rates, B.timestamp will go backwards from S.stop to S.start,
making the stream time go backwards.
===============================
Therefore, the calculation for applied_rate < 0 should be:
stream_time = (S.stop - B.timestamp) * ABS (S.applied_rate) + S.time
and the reverse:
B.timestamp = S.stop - (stream_time - S.time) / ABS (S.applied_rate)
https://bugzilla.gnome.org/show_bug.cgi?id=756810
Vivia Nikolaidou [Fri, 25 Sep 2015 12:57:16 +0000 (15:57 +0300)]
segment: gst_segment_to_stream_time: Renamed 'result' to 'stream_time'
Renamed the "result" variable to "stream_time" for better readability.
Florin Apostol [Sat, 24 Oct 2015 15:52:44 +0000 (16:52 +0100)]
uri: fix behaviour for merging uris ending in .. without following /
https://bugzilla.gnome.org/show_bug.cgi?id=757065
Sebastian Dröge [Wed, 21 Oct 2015 11:49:49 +0000 (14:49 +0300)]
pad: Fix docs/annotation of gst_pad_probe_info_get_buffer_list()
It's not get_bufferlist(). Because of that it was ignored by the docs and
G-I, leading to crashes because of broken ownership transfer.
https://bugzilla.gnome.org/show_bug.cgi?id=756898
Sebastian Dröge [Sat, 17 Oct 2015 19:13:08 +0000 (22:13 +0300)]
bin: Make sure to free all cached messages when going to NULL
An ASYNC READY->PAUSED might have failed without the bin code noticing during
the state change, in which case we will never get PAUSED->READY and would leak
messages.
https://bugzilla.gnome.org/show_bug.cgi?id=756611
Edward Hervey [Thu, 15 Oct 2015 14:32:42 +0000 (16:32 +0200)]
multiqueue: Improve incoming SEGMENT handling
Previously this code was just blindly setting the cached flow return
of downstream to GST_FLOW_OK when we get a SEGMENT.
The problem is that this can not be done blindly. If downstream was
not linked, the corresponding sinqlequeue source pad thread might be
waiting for the next ID to be woken up upon.
By blindly setting the cached return value to GST_FLOW_OK, and if that
stream was the only one that was NOT_LINKED, then the next time we
check (from any other thread) to see if we need to wake up a source pad
thread ... we won't even try, because none of the cached flow return
are equal to GST_FLOW_NOT_LINKED.
This would result in that thread never being woken up
https://bugzilla.gnome.org/show_bug.cgi?id=756645
Edward Hervey [Mon, 12 Oct 2015 15:29:26 +0000 (17:29 +0200)]
baseparse: Update internal position even if not linked
Our current position has nothing to do with being linked or not.
Avoids having stray segment updates fired every 2s
Stefan Sauer [Mon, 5 Oct 2015 19:29:49 +0000 (21:29 +0200)]
tests: fix the tag test
The previous change (see bgo #756069) was causing us to free the same pointer
multiple times. If we actually get a sample back, the test fails, no need to
free anything in that case.
Vineeth TM [Mon, 5 Oct 2015 02:12:47 +0000 (11:12 +0900)]
tests/gst-launch: Fix sample memory leak
When sample is got using gst_tag_list_get_sample_index, it should
be free'd.
https://bugzilla.gnome.org/show_bug.cgi?id=756069
Sebastian Dröge [Wed, 7 Oct 2015 10:25:52 +0000 (11:25 +0100)]
gst-ptp-helper: #include <sys/socket.h> to fix net/if.h include on OSX 10.6
In file included from gst-ptp-helper.c:40:0:
/usr/include/net/if.h:265:19: error: field 'ifru_addr' has incomplete type
struct sockaddr ifru_addr;
https://bugzilla.gnome.org/show_bug.cgi?id=756136
Tim-Philipp Müller [Mon, 28 Sep 2015 15:01:55 +0000 (16:01 +0100)]
check: fix 'format string is not a string literal' warning with clang
Broke this when I removed the G_GNUC_PRINTF in a previous
commit to fix indentation, since it was not really needed.
Turns out unlike gcc clang warns though if a non-literal
format string is passed then. Fix indentation differently.
http://clang.llvm.org/docs/AttributeReference.html#format-gnu-format
Sebastian Dröge [Fri, 25 Sep 2015 21:14:33 +0000 (23:14 +0200)]
Release 1.6.0
Sebastian Dröge [Fri, 25 Sep 2015 20:41:16 +0000 (22:41 +0200)]
Update .po files
Vineeth TM [Fri, 25 Sep 2015 01:18:07 +0000 (10:18 +0900)]
ptpclock: Fix error leak during failures
https://bugzilla.gnome.org/show_bug.cgi?id=755607
Stian Selnes [Mon, 21 Sep 2015 11:58:51 +0000 (13:58 +0200)]
funnel: Fix racy state change
Iterator may need to be resynced, for instance if pads are released
during state change.
got_eos should be protected by the object lock of the element, not of
the pad, as is the case throughout the rest of the funnel code.
https://bugzilla.gnome.org/show_bug.cgi?id=755343
Stian Selnes [Mon, 21 Sep 2015 13:22:19 +0000 (15:22 +0200)]
bin: element: Ignore activate result for removed pads on state change
This fixes a race where a state change may return failure if it has
request pads that are deactivated and removed (and thus have no
parent) at the same time as the element changes state and (de)activates
its pads.
https://bugzilla.gnome.org/show_bug.cgi?id=755342
Havard Graff [Thu, 24 Sep 2015 08:23:14 +0000 (10:23 +0200)]
harness: don't crash when adding a sink-harness without h->sinkpad
https://bugzilla.gnome.org/show_bug.cgi?id=755511
Sebastian Dröge [Wed, 23 Sep 2015 18:31:48 +0000 (20:31 +0200)]
basetransform: Print buffer PTS when submitting an input buffer
Eunhae Choi [Mon, 21 Sep 2015 05:58:46 +0000 (14:58 +0900)]
inputselector: Fix buffer leak in sync_streams & cache_buffers mode
After doing gst_pad_push() in case of sync_streams and cache_buffers,
if the buffer can not be kept in cache, it should be unreffed to avoid
memory leackage.
https://bugzilla.gnome.org/show_bug.cgi?id=755141
Vikram Fugro [Sat, 19 Sep 2015 11:27:26 +0000 (16:57 +0530)]
gst: Documentation typo fix in caps & pad APIs
gst_caps_can_intersect() & GST_PAD_IS_ACCEPT_INTERSECT()
documentation typo fix.
https://bugzilla.gnome.org/show_bug.cgi?id=755257
Sebastian Dröge [Fri, 18 Sep 2015 17:07:18 +0000 (19:07 +0200)]
Release 1.5.91
Sebastian Dröge [Fri, 18 Sep 2015 17:07:10 +0000 (19:07 +0200)]
Update .po files
Sebastian Dröge [Fri, 18 Sep 2015 09:49:03 +0000 (11:49 +0200)]
po: Update translations
Vineeth TM [Tue, 15 Sep 2015 01:56:40 +0000 (10:56 +0900)]
downloadbuffer, benchmarks: fix error leaks in failure code paths
https://bugzilla.gnome.org/show_bug.cgi?id=755019
Vineeth TM [Tue, 15 Sep 2015 01:52:55 +0000 (10:52 +0900)]
check: Fix indentation
https://bugzilla.gnome.org/show_bug.cgi?id=755019
Tim-Philipp Müller [Tue, 15 Sep 2015 17:05:11 +0000 (18:05 +0100)]
bufferpool: sprinkle some allow-none and out annotations for g-i
Vineeth TM [Mon, 14 Sep 2015 02:01:11 +0000 (11:01 +0900)]
bin: fix typo in log message when threadpool alloc fails
https://bugzilla.gnome.org/show_bug.cgi?id=754975
Igor Rondarev [Fri, 11 Sep 2015 14:58:48 +0000 (17:58 +0300)]
configure: Check for socketpair() in -lsocket too
On e.g. QNX it is in an external library, not libc.
https://bugzilla.gnome.org/show_bug.cgi?id=754875
Arun Raghavan [Wed, 9 Sep 2015 07:40:04 +0000 (13:10 +0530)]
Revert "docs: Make sure gst_debug_bin_to_dot_data() is documented"
This reverts commit
0dffeb03018d12be522c2d97aaaf8102153bd7c0.
The commit is erroneous and documents the function twice.
Arun Raghavan [Thu, 23 Jul 2015 06:48:51 +0000 (12:18 +0530)]
docs: Make sure gst_debug_bin_to_dot_data() is documented
Thanks to Nirbheek Chauhan <nirbheek@centricular.com> for pointing this
out.
Stian Selnes [Wed, 5 Aug 2015 08:07:50 +0000 (10:07 +0200)]
harness: Fix race for gst_harness_element_ref
In order for gst_harness_new_full to be MT-safe the increase and
decrease of HARNESS_REF must be MT-safe. This allows for creating
multiple harnesses from different threads wrapping the same element.
https://bugzilla.gnome.org/show_bug.cgi?id=754661
Stian Selnes [Wed, 5 Aug 2015 07:59:39 +0000 (09:59 +0200)]
harness: Allow-none for custom stress init func
It should be allowed to not have a function to initialize the user data
since it's often not necessary; it may already be initialized.
https://bugzilla.gnome.org/show_bug.cgi?id=754661
Tim-Philipp Müller [Sun, 6 Sep 2015 08:58:09 +0000 (09:58 +0100)]
docs: remove signal that no longer exists from docs
Tim-Philipp Müller [Sat, 5 Sep 2015 10:20:49 +0000 (11:20 +0100)]
po: update for translated string changes
Tim-Philipp Müller [Sat, 5 Sep 2015 10:18:27 +0000 (11:18 +0100)]
tools: gst-launch: fix --exclude command line option
This has not worked (as in: crashed) since 2005, so
perhaps it should just be removed instead.
Tim-Philipp Müller [Mon, 31 Aug 2015 11:07:10 +0000 (12:07 +0100)]
Revert "queue2: Process SEEKING query"
This caused problems with oggdemux when queue2 was
operating in queue mode and the souphttpsrc upstream
is not seekable because the server doesn't support
range requests. It would then still claim seekability
and then things go wrong from there.
This reverts commit
7b0b93dafe4ac547552cdb66ade5d8aa0405e7b4.
https://bugzilla.gnome.org/show_bug.cgi?id=753887
Havard Graff [Sat, 29 Aug 2015 18:14:44 +0000 (20:14 +0200)]
harness: misc bugfixes
1. Get a list of pad templates from the element class, not the
factory. This allows us to interact with test-elements that does
not have a factory.
2. Use the pad_template_caps in caps-queries when caps is not set
explicitly on the pad. Not doing so is simply wrong, and prohibits
interactions with special templates used for testing.
https://bugzilla.gnome.org/show_bug.cgi?id=754193
Thiago Santos [Wed, 26 Aug 2015 12:29:05 +0000 (09:29 -0300)]
tests: event: fix build failure
gst/gstevent.c:250:5: error: ‘for’ loop initial declarations are only
allowed in C99 or C11 mode
Vivia Nikolaidou [Mon, 24 Aug 2015 18:04:37 +0000 (21:04 +0300)]
bin: Make sure we don't add/remove a bin to/from itself
Doing so would deadlock from trying to acquire the object lock twice
https://bugzilla.gnome.org/show_bug.cgi?id=754036
Nicolas Dufresne [Fri, 21 Aug 2015 21:28:48 +0000 (14:28 -0700)]
basetransform: Reconfigure before propose_allocation
There exist cases where a reconfigure event was propagated from
downstream, but caps didn't change. In this case, we would
reconfigure only when the next buffer arrives. The problem is that
due to the allocation query being cached, the return query parameters
endup outdated.
In this patch we refactor the reconfigurating code into a function, and
along with reconfiguring when a new buffer comes in, we also reconfigure
when a query allocation arrives.
https://bugzilla.gnome.org/show_bug.cgi?id=753850
Nicolas Dufresne [Fri, 7 Aug 2015 19:39:59 +0000 (15:39 -0400)]
basesrc-test: Fix race testing segment update
As this test is using a short sleep (GST_USECOND, which is 10ms
in microsecond), sometimes that EOS event is received before the
loop in basesrc have run _do_seek() and pushed the update segment.
To solve this issue, we wait for the initial segment (and flush it)
then we wait for the second segment before sending EOS.
https://bugzilla.gnome.org/show_bug.cgi?id=753365
Thibault Saunier [Wed, 19 Aug 2015 09:46:07 +0000 (11:46 +0200)]
bin: Add NLE to GST_PLUGIN_PATH
Sebastian Dröge [Wed, 19 Aug 2015 09:50:56 +0000 (12:50 +0300)]
Release 1.5.90
Sebastian Dröge [Wed, 19 Aug 2015 09:33:41 +0000 (12:33 +0300)]
Update .po files
Sebastian Dröge [Wed, 19 Aug 2015 08:17:29 +0000 (11:17 +0300)]
po: Update translations
Tim-Philipp Müller [Tue, 18 Aug 2015 14:44:02 +0000 (15:44 +0100)]
baseparse: avoid tag list spam if upstream provides bitrate tags already
Explicitly keep track again whether upstream tags or parser tags
already contain bitrate information, and only force a tag update
for a bitrate if we are actually going to add the bitrate to the
taglist later. This fixes constant re-sending of the same taglist,
because upstream provided a bitrate already and we didn't add it,
so we didn't save the 'posted' bitrate, which would then in turn
again trigger the 'bitrate has changed too much, update tags'
code path. Fixes tag spam with m4a files for example.
https://bugzilla.gnome.org/show_bug.cgi?id=679768
Stefan Sauer [Mon, 17 Aug 2015 20:06:11 +0000 (22:06 +0200)]
debugutils: bring the dot style a bit closer to what we use in the docs
Use round corners for bins and elements. Put sink pads on the left and src pads
on the right of elements.
Tim-Philipp Müller [Sat, 15 Aug 2015 17:30:15 +0000 (18:30 +0100)]
baseparse: fix tag handling
In 0.10 there were no sticky events, and all tag events
sent would just be merged with the previously-received
tags. In 1.x we have sticky events, and the tags in the
tag event(s) should at all times carry the complete tags,
so we can't just push some tags and then just push tags
with just bitrates to update the bitrates, etc.
Instead we need to keep track of the upstream stream tags
received, of the tags set by the video decoder subclass,
and send an updated tag event with the combined tags
including our own bitrate tags (if applicable) whenever
the upstream tags, the subclass tags or any of our bitrates
change.
https://bugzilla.gnome.org/show_bug.cgi?id=679768
Tim-Philipp Müller [Sun, 16 Aug 2015 09:15:56 +0000 (10:15 +0100)]
baseparse: add API for subclass to set tags
This is needed so that we can do proper tag handling
all around, and combine the upstream tags with the
tags set by the subclass and any extra tags the
base class may want to add.
API: gst_base_parse_merge_tags()
https://bugzilla.gnome.org/show_bug.cgi?id=679768
Tim-Philipp Müller [Sat, 15 Aug 2015 15:01:28 +0000 (16:01 +0100)]
baseparse: save upstream stream tags
We'll need those later.
https://bugzilla.gnome.org/show_bug.cgi?id=679768
Tim-Philipp Müller [Sat, 15 Aug 2015 15:39:40 +0000 (16:39 +0100)]
baseparse: minor code simplification
Use gst_pad_peer_query_duration() and remove a few
unnecessary levels of indentation. Rest of code might
looks a bit questionable, but leave it as is for now.
Sebastian Dröge [Sat, 15 Aug 2015 15:59:21 +0000 (17:59 +0200)]
pad: Break sticky event array iterations if the type is bigger than the one we look for
Microoptimization we can do because the array is sorted by type.
Edward Hervey [Wed, 29 Apr 2015 13:49:17 +0000 (15:49 +0200)]
gstpad: Add a new GST_PROBE_HANDLED return value for probes
In some cases, probes might want to handle the buffer/event/query
themselves and stop the data from travelling further downstream.
While this was somewhat possible with buffer/events and using
GST_PROBE_DROP, it was not applicable to queries, and would result
in the query failing.
With this new GST_PROBE_HANDLED value, the buffer/event/query will
be considered as successfully handled, will not be pushed further
and the appropriate return value (TRUE or GST_FLOW_OK) will be returned
This also allows probes to return a non-default GstFlowReturn when dealing
with buffer push. This can be done by setting the
GST_PAD_PROBE_INFO_FLOW_RETURN() field accordingly
https://bugzilla.gnome.org/show_bug.cgi?id=748643
Mathieu Duponchelle [Sat, 15 Aug 2015 11:25:35 +0000 (13:25 +0200)]
gstversion: Add missing include in .in file.
Mathieu Duponchelle [Mon, 10 Aug 2015 22:35:21 +0000 (00:35 +0200)]
Headers: add missing includes.
Thiago Santos [Sat, 15 Aug 2015 09:41:14 +0000 (06:41 -0300)]
docs: add the new pad accept-template flag to the docs
Nirbheek Chauhan [Fri, 14 Aug 2015 17:14:50 +0000 (22:44 +0530)]
docs: section entry missing for gst_direct_control_binding_new_absolute
Thiago Santos [Fri, 14 Aug 2015 11:14:52 +0000 (08:14 -0300)]
tests: pad: tests for accept-caps default handling
Check if all the default 4 accept-caps possibilities are working:
subset or intersect check and query-caps or template caps comparisons.
https://bugzilla.gnome.org/show_bug.cgi?id=753623
Thiago Santos [Fri, 14 Aug 2015 10:51:07 +0000 (07:51 -0300)]
pad: add GST_PAD_FLAG_ACCEPT_TEMPLATE
It will make the default accept-caps handler use the pad template
caps instead of the query-caps result to check if the caps is
acceptable. This is aligned with what the design docs says the
accept-caps should do (be non-recursive) and should be faster. It
is *not* enabled by default, though.
API: GST_PAD_FLAG_ACCEPT_TEMPLATE
API: GST_PAD_IS_ACCEPT_TEMPLATE
API: GST_PAD_SET_ACCEPT_TEMPLATE
API: GST_PAD_UNSET_ACCEPT_TEMPLATE
https://bugzilla.gnome.org/show_bug.cgi?id=753623
Edward Hervey [Fri, 14 Aug 2015 09:10:03 +0000 (11:10 +0200)]
check: Rename states unit test
Makes it easier to differentiate from other modules states unit test
Thiago Santos [Thu, 13 Aug 2015 16:08:03 +0000 (13:08 -0300)]
basetransform: rework accept-caps
According to the design docs:
The ACCEPT_CAPS query is not required to work recursively, it can simply
return TRUE if a subsequent CAPS event with those caps would return
success.
So make it a shallow check instead of recursivelly check downstream.
https://bugzilla.gnome.org/show_bug.cgi?id=748635
Thiago Santos [Thu, 13 Aug 2015 15:44:29 +0000 (12:44 -0300)]
basetransform: remove some dead code
Doesn't seem like it is going to get back to life anytime soon
Also removes a {} block that was likely used to keep the dead
code around.
Thiago Santos [Tue, 11 Aug 2015 11:07:53 +0000 (08:07 -0300)]
basetransform: respect accept-caps intersect flag
GstPad has a flag for suggesting if the accept-caps
query should use intersect instead of the default
subset caps operation to verify if the caps would be
acceptable.
basetransform currently always uses the subset check and
this patch makes it honor the flag for using intersect
if it is set.
https://bugzilla.gnome.org/show_bug.cgi?id=748635
Vineeth TM [Wed, 12 Aug 2015 04:12:38 +0000 (13:12 +0900)]
basetransform: remove unreachable return statement
https://bugzilla.gnome.org/show_bug.cgi?id=753538
Tim-Philipp Müller [Tue, 11 Aug 2015 10:09:24 +0000 (11:09 +0100)]
tests: ignore new harness test binary
Vivia Nikolaidou [Mon, 10 Aug 2015 12:31:37 +0000 (15:31 +0300)]
datetime: accept just a time as ISO 8601 string and use today's date then
If no date and only a time is given in gst_date_time_new_from_iso8601_string(),
assume that it is "today" and try to parse the time-only string. "Today" is
assumed to be in the timezone provided by the user (if any), otherwise Z -
just like the behavior of the existing code.
https://bugzilla.gnome.org/show_bug.cgi?id=753455
Havard Graff [Thu, 23 Jul 2015 22:41:57 +0000 (00:41 +0200)]
harness: add _set_forwarding function
To be able to disable the slightly "magic" forwarding of the
necessary events between the harnesses.
Also introduce a new test-suite for GstHarness, that documents the
feature, and should hopefully expand into documenting most of the
features the harness possesses.
https://bugzilla.gnome.org/show_bug.cgi?id=752746
Wim Taymans [Sat, 8 Aug 2015 15:59:51 +0000 (17:59 +0200)]
devicemonitor: fix provider leak
Edward Hervey [Sat, 8 Aug 2015 13:28:19 +0000 (15:28 +0200)]
pad: Fix previous commit
We want to get the caps query *result*
Wim Taymans [Thu, 16 Jul 2015 16:56:00 +0000 (18:56 +0200)]
deviceprovider: Add method to hide devices from a provider
Add methods to add/remove the providers that should be hidden by this
provider. Also make a method to get a list of hidden providers.
This makes it possible to have multiple systems monitor the same devices
and remove duplicates.
Add a property to see all devices, even duplicate ones from hidden
providers.
Edward Hervey [Sat, 8 Aug 2015 12:42:52 +0000 (14:42 +0200)]
pad: get_allowed_caps() should go through both pads
The previous implementation was doing a direct call to the peer pad,
which resulted in query probes never being called on the original pad.
Instead of that, get the peer pad caps by using gst_pad_peer_query()
which will call probes in the expected fashion.
Vineeth TM [Fri, 7 Aug 2015 01:08:21 +0000 (10:08 +0900)]
value: free caps during failure
While calling gst_value_deserialize_sample, if there is a failure
after caps is ref'ed, then caps is getting leaked. Hence checking for
caps in fail: goto condition and unref'ing it
https://bugzilla.gnome.org/show_bug.cgi?id=753338
Thibault Saunier [Tue, 21 Jul 2015 11:35:33 +0000 (13:35 +0200)]
registry: Add plugins to the registry we are loading and not default one
When running gst_registry_scan_plugin_file we were losing the
information about the registry being loaded and ended up adding the
plugin to the default registry which was not correct.
https://bugzilla.gnome.org/show_bug.cgi?id=752662
Nicolas Dufresne [Wed, 5 Aug 2015 19:51:27 +0000 (15:51 -0400)]
basesink: Only drop buffer if their PTS is out of segment
As of now, even for stream completly inside segment, there is no
guarantied that the DTS will be inside the segment. Specifically
for H.264 with B-Frames, the first few frames often have DTS that
are before the segment.
Instead of using the sync timestamp to clip out of segment buffer,
take the duration from the start/stop provided by the sub-class, and
check if the pts and pts_end is out of segment.
https://bugzilla.gnome.org/show_bug.cgi?id=752791
Luis de Bethencourt [Wed, 5 Aug 2015 13:05:25 +0000 (14:05 +0100)]
harness: don't run code inside g_assert
Even though asserts can't be disabled in GstHarness, Coverity still
complains about running code inside them. Moving the code to outside the
g_asserts().
CID #1311326, #1311327, #1311328
Wim Taymans [Fri, 17 Jul 2015 08:18:02 +0000 (10:18 +0200)]
devicemonitor: get a list of currently monitored providers
Get a list of the currently monitored providers.
George Kiagiadakis [Sun, 2 Aug 2015 15:38:14 +0000 (17:38 +0200)]
pad: fix invalid unref after IDLE probe on non-OK flow return
In case there is an IDLE probe fired from gst_pad_push_data and it
doesn't return GST_FLOW_OK, the code jumps to the probe_stopped
label which tries to unref the data object. However, at this point
the data object belongs downstream and must not be touched.
By setting data = NULL, the code skips this unref.
https://bugzilla.gnome.org//show_bug.cgi?id=753151
Jan Schmidt [Tue, 4 Aug 2015 10:08:04 +0000 (20:08 +1000)]
buffer: Fix the name of the parentbuffermeta debug category.
Don't use 'glbufferrefmeta' as the debug category for the
parent buffer meta.
Eunhae Choi [Tue, 4 Aug 2015 04:45:09 +0000 (13:45 +0900)]
queue2: not update upstream size with negative value
upstream_size can be negative but queue->upstream_size is unsigned type.
to get a chance to update queue->upstream_size in gst_queue2_get_range()
it should keep the default value.
https://bugzilla.gnome.org/show_bug.cgi?id=753011
Jan Schmidt [Tue, 4 Aug 2015 09:59:28 +0000 (19:59 +1000)]
buffer: Remove extra debug symbol from exports
Don't export the debug variable for the parent_buffer_meta.
This was accidentally exported and shouldn't be public
Stefan Sauer [Mon, 3 Aug 2015 22:11:24 +0000 (00:11 +0200)]
filesink: use GST_INFO_OBJECT for more detail
Helps to distiguish multiple filesinks.
Tim-Philipp Müller [Thu, 30 Jul 2015 16:29:25 +0000 (17:29 +0100)]
docs: info: remove 0.8 terminology from log level description
We don't "iterate" bins or pipelines any more.
Tim-Philipp Müller [Thu, 30 Jul 2015 11:17:16 +0000 (12:17 +0100)]
tests: baseparse: fix buffer leak in unit test
Fixes make check-valgrind
Nicolas Dufresne [Wed, 29 Jul 2015 01:14:22 +0000 (21:14 -0400)]
doc/seekflags: Fix cross references
This fixes miss-use of @ instead of % to refer to enumeration
values.
Tim-Philipp Müller [Tue, 28 Jul 2015 21:30:54 +0000 (22:30 +0100)]
docs: add a few more new symbols and defines
Nicolas Dufresne [Tue, 28 Jul 2015 20:57:43 +0000 (16:57 -0400)]
doc/capsfilter: Document filtering modes
This is documentation for the HTML documentation.
Nicolas Dufresne [Tue, 28 Jul 2015 20:50:55 +0000 (16:50 -0400)]
doc/filesink: Add BufferMode enumeration
This is purely for documentation purpose. This way the values will
show up in the HTML documentation.
Nicolas Dufresne [Tue, 28 Jul 2015 19:50:40 +0000 (15:50 -0400)]
doc/gsthardness: Fix typo in GstAllocationParams
It's not GstAllocatorParams but GstAllocationParams.
Nicolas Dufresne [Tue, 28 Jul 2015 19:46:09 +0000 (15:46 -0400)]
doc/gstharness: Remove unknown parameter
sink_elenment_name is not a parameter of gst_harness_add_sink_harness()
function, but still it show up in documentation.
Sebastian Dröge [Tue, 28 Jul 2015 09:19:04 +0000 (12:19 +0300)]
capsfilter: Only remember previous filter caps if they were actually used for something
If nobody ever saw the previous filter caps, nothing could've negotiated with
them and we can just pretend they never existed at all.
Sebastian Dröge [Tue, 28 Jul 2015 09:16:12 +0000 (12:16 +0300)]
capsfilter: When switching caps change modes, forget all previous caps
Olivier Crête [Thu, 23 Jul 2015 22:15:05 +0000 (18:15 -0400)]
basetransform: Return FLOW_FLUSHING if negotiation fails during shutdown
https://bugzilla.gnome.org/show_bug.cgi?id=752800
Olivier Crête [Wed, 22 Jul 2015 22:55:29 +0000 (18:55 -0400)]
harness: Fix indendation
Nicolas Dufresne [Tue, 21 Jul 2015 17:14:59 +0000 (13:14 -0400)]
basetransform: Avoid increasing query reference
gst_query_find_allocation_meta() requires the query to be
writable to work. This patch ensure avoids taking a reference
on the query, so we can now check if a certain allocation meta
is present.
https://bugzilla.gnome.org/show_bug.cgi?id=752661
Tim-Philipp Müller [Wed, 22 Jul 2015 14:38:06 +0000 (15:38 +0100)]
docs: fix description of gst_buffer_extract_dup()
No GBytes involved.
Thiago Santos [Tue, 21 Jul 2015 03:17:28 +0000 (00:17 -0300)]
concat: dot not reset pad states too early
Resetting the flushing state of the pads at the end of the
PAUSED_TO_READY transition will make pads handle serialized
queries again which will wait for non-active pads and might
cause deadlocks when stopping the pipeline.
Move the reset to the READY_TO_PAUSED instead.
https://bugzilla.gnome.org/show_bug.cgi?id=752623
Havard Graff [Mon, 20 Jul 2015 14:18:06 +0000 (16:18 +0200)]
harness: add functions for adding sub-harnesses directly
By introducing gst_harness_add_src_harness and gst_harness_add_sink_harness
we collect all sub-harness setup in one function, making the previous
sub-harness creation functions now calls these directly, and making it
much easier (and less error-prone) to add your own src or sink-harness
using the more generic harness-creation functions.
Nicolas Dufresne [Fri, 17 Jul 2015 21:44:52 +0000 (17:44 -0400)]
baseparse: Don't override gst_segment_do_seek()
This line has no purpose, clearly gst_segment_do_seek() is doing
the right job, also, having the start time (a timestamp) be that
same as time (the stream time) is quite odd.
https://bugzilla.gnome.org/show_bug.cgi?id=750783
Nicolas Dufresne [Fri, 17 Jul 2015 21:43:26 +0000 (17:43 -0400)]
baseparse: Fix extrapolation of seeksegment.stop
The stop shall be relative to start if extrapolated from the
duration.
https://bugzilla.gnome.org/show_bug.cgi?id=750783