ARM: dts: imx51: Fix memory node duplication

[ Upstream commit 6a9681168b83c62abfa457c709f2f4b126bd6b92 ]

Boards based on imx51 have duplicate memory nodes:

- One coming from the board dts file: memory@

- One coming from the imx51.dtsi file.

Fix the duplication by removing the memory node from the dtsi file
and by adding 'device_type = "memory";' in the board dts.

Reported-by: Rob Herring <robh@kernel.org>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: debug-imx: only define DEBUG_IMX_UART_PORT if needed

[ Upstream commit 7c41ea57beb2aee96fa63091a457b1a2826f3c42 ]

If debugging on i.MX is enabled DEBUG_IMX_UART_PORT defines which UART
is used for the debug output. If however debugging is off don't only
hide the then unused config item but drop it completely by using a
dependency instead of a conditional prompt.

This fixes DEBUG_IMX_UART_PORT being present in the kernel config even
if DEBUG_LL is disabled.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tracing: Lock event_mutex before synth_event_mutex

[ Upstream commit fc800a10be26017f8f338bc8e500d48e3e6429d9 ]

synthetic event is using synth_event_mutex for protecting
synth_event_list, and event_trigger_write() path acquires
locks as below order.

event_trigger_write(event_mutex)
  ->trigger_process_regex(trigger_cmd_mutex)
    ->event_hist_trigger_func(synth_event_mutex)

On the other hand, synthetic event creation and deletion paths
call trace_add_event_call() and trace_remove_event_call()
which acquires event_mutex. In that case, if we keep the
synth_event_mutex locked while registering/unregistering synthetic
events, its dependency will be inversed.

To avoid this issue, current synthetic event is using a 2 phase
process to create/delete events. For example, it searches existing
events under synth_event_mutex to check for event-name conflicts, and
unlocks synth_event_mutex, then registers a new event under event_mutex
locked. Finally, it locks synth_event_mutex and tries to add the
new event to the list. But it can introduce complexity and a chance
for name conflicts.

To solve this simpler, this introduces trace_add_event_call_nolock()
and trace_remove_event_call_nolock() which don't acquire
event_mutex inside. synthetic event can lock event_mutex before
synth_event_mutex to solve the lock dependency issue simpler.

Link: http://lkml.kernel.org/r/154140844377.17322.13781091165954002713.stgit@devbox
Reviewed-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Tested-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: Fix up SQ201 flash access

[ Upstream commit d88b11ef91b15d0af9c0676cbf4f441a0dff0c56 ]

This sets the partition information on the SQ201 to be read
out from the RedBoot partition table, removes the static
partition table and sets our boot options to mount root from
/dev/mtdblock2 where the squashfs+JFFS2 resides.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: lpfc: Fix dif and first burst use in write commands

[ Upstream commit 7c4042a4d0b7532cfbc90478fd3084b2dab5849e ]

When dif and first burst is used in a write command wqe, the driver was not
properly setting fields in the io command request. This resulted in no dif
bytes being sent and invalid xfer_rdy's, resulting in the io being aborted
by the hardware.

Correct the wqe initializaton when both dif and first burst are used.

Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: lpfc: Fix kernel Oops due to null pring pointers

[ Upstream commit 5a9eeff57f340238c39c95d8e7e54c96fc722de7 ]

Driver is hitting null pring pointers in lpfc_do_work().

Pointer assignment occurs based on SLI-revision. If recovering after an
error, its possible the sli revision for the port was cleared, making the
lpfc_phba_elsring() not return a ring pointer, thus the null pointer.

Add SLI revision checking to lpfc_phba_elsring() and status checking to all
callers.

Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: target/tcmu: Fix queue_cmd_ring() declaration

[ Upstream commit e7f411049f5164ee6db6c3434c07302846f09990 ]

This patch does not change any functionality but avoids that sparse
complains about the queue_cmd_ring() function and its callers.

Fixes: 6fd0ce79724d ("tcmu: prep queue_cmd_ring to be used by unmap wq")
Reviewed-by: David Disseldorp <ddiss@suse.de>
Cc: Nicholas Bellinger <nab@linux-iscsi.org>
Cc: Mike Christie <mchristi@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pwm: bcm-iproc: Prevent unloading the driver module while in use

[ Upstream commit 24906a41eecb73d51974ade0847c21e429beec60 ]

The owner member of struct pwm_ops must be set to THIS_MODULE to
increase the reference count of the module such that the module cannot
be removed while its code is in use.

Fixes: daa5abc41c80 ("pwm: Add support for Broadcom iProc PWM controller")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

block: drbd: remove a stray unlock in __drbd_send_protocol()

[ Upstream commit 8e9c523016cf9983b295e4bc659183d1fa6ef8e0 ]

There are two callers of this function and they both unlock the mutex so
this ends up being a double unlock.

Fixes: 44ed167da748 ("drbd: rcu_read_lock() and rcu_dereference() for tconn->net_conf")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mac80211: fix station inactive_time shortly after boot

[ Upstream commit 285531f9e6774e3be71da6673d475ff1a088d675 ]

In the first 5 minutes after boot (time of INITIAL_JIFFIES),
ieee80211_sta_last_active() returns zero if last_ack is zero. This
leads to "inactive time" showing jiffies_to_msecs(jiffies).

 # iw wlan0 station get fc:ec:da:64:a6:dd
 Station fc:ec:da:64:a6:dd (on wlan0)
inactive time: 4294894049 ms
.
.
connected time: 70 seconds

Fix by returning last_rx if last_ack == 0.

Signed-off-by: Ahmed Zaki <anzaki@gmail.com>
Link: https://lore.kernel.org/r/20191031121243.27694-1-anzaki@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/fq_impl: Switch to kvmalloc() for memory allocation

[ Upstream commit 71e67c3bd127cfe7863f54e4b087eba1cc8f9a7a ]

The FQ implementation used by mac80211 allocates memory using kmalloc(),
which can fail; and Johannes reported that this actually happens in
practice.

To avoid this, switch the allocation to kvmalloc() instead; this also
brings fq_impl in line with all the FQ qdiscs.

Fixes: 557fc4a09803 ("fq: add fair queuing framework")
Reported-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/r/20191105155750.547379-1-toke@redhat.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ceph: return -EINVAL if given fsc mount option on kernel w/o support

[ Upstream commit ff29fde84d1fc82f233c7da0daa3574a3942bec7 ]

If someone requests fscache on the mount, and the kernel doesn't
support it, it should fail the mount.

[ Drop ceph prefix -- it's provided by pr_err. ]

Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: mscc: ocelot: fix __ocelot_rmw_ix prototype

[ Upstream commit 17fdd7638cb687cd7f15a48545f25d738f0101e0 ]

The "read-modify-write register index" function is declared with a
confusing prototype: the "mask" and "reg" arguments are swapped.

Fortunately, this does not affect callers so far. Both arguments are
u32, and the wrapper macros (ocelot_rmw_ix etc) have the arguments in
the correct order (the one from ocelot_io.c).

Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: bcmgenet: reapply manual settings to the PHY

[ Upstream commit 0686bd9d5e6863f60e4bb1e78e6fe7bb217a0890 ]

The phy_init_hw() function may reset the PHY to a configuration
that does not match manual network settings stored in the phydev
structure. If the phy state machine is polled rather than event
driven this can create a timing hazard where the phy state machine
might alter the settings stored in the phydev structure from the
value read from the BMCR.

This commit follows invocations of phy_init_hw() by the bcmgenet
driver with invocations of the genphy_config_aneg() function to
ensure that the BMCR is written to match the settings held in the
phydev structure. This prevents the risk of manual settings being
accidentally altered.

Fixes: 1c1008c793fa ("net: bcmgenet: add main driver file")
Signed-off-by: Doug Berger <opendmb@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: bcmgenet: use RGMII loopback for MAC reset

[ Upstream commit 3a55402c93877d291b0a612d25edb03d1b4b93ac ]

As noted in commit 28c2d1a7a0bf ("net: bcmgenet: enable loopback
during UniMAC sw_reset") the UniMAC must be clocked while sw_reset
is asserted for its state machines to reset cleanly.

The transmit and receive clocks used by the UniMAC are derived from
the signals used on its PHY interface. The bcmgenet MAC can be
configured to work with different PHY interfaces including MII,
GMII, RGMII, and Reverse MII on internal and external interfaces.
Unfortunately for the UniMAC, when configured for MII the Tx clock
is always driven from the PHY which places it outside of the direct
control of the MAC.

The earlier commit enabled a local loopback mode within the UniMAC
so that the receive clock would be derived from the transmit clock
which addressed the observed issue with an external GPHY disabling
it's Rx clock. However, when a Tx clock is not available this
loopback is insufficient.

This commit implements a workaround that leverages the fact that
the MAC can reliably generate all of its necessary clocking by
enterring the external GPHY RGMII interface mode with the UniMAC in
local loopback during the sw_reset interval. Unfortunately, this
has the undesirable side efect of the RGMII GTXCLK signal being
driven during the same window.

In most configurations this is a benign side effect as the signal
is either not routed to a pin or is already expected to drive the
pin. The one exception is when an external MII PHY is expected to
drive the same pin with its TX_CLK output creating output driver
contention.

This commit exploits the IEEE 802.3 clause 22 standard defined
isolate mode to force an external MII PHY to present a high
impedance on its TX_CLK output during the window to prevent any
contention at the pin.

The MII interface is used internally with the 40nm internal EPHY
which agressively disables its clocks for power savings leading to
incomplete resets of the UniMAC and many instabilities observed
over the years. The workaround of this commit is expected to put
an end to those problems.

Fixes: 1c1008c793fa ("net: bcmgenet: add main driver file")
Signed-off-by: Doug Berger <opendmb@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scripts/gdb: fix debugging modules compiled with hot/cold partitioning

[ Upstream commit 8731acc5068eb3f422a45c760d32198175c756f8 ]

gcc's -freorder-blocks-and-partition option makes it group frequently
and infrequently used code in .text.hot and .text.unlikely sections
respectively.  At least when building modules on s390, this option is
used by default.

gdb assumes that all code is located in .text section, and that .text
section is located at module load address.  With such modules this is no
longer the case: there is code in .text.hot and .text.unlikely, and
either of them might precede .text.

Fix by explicitly telling gdb the addresses of code sections.

It might be tempting to do this for all sections, not only the ones in
the white list.  Unfortunately, gdb appears to have an issue, when
telling it about e.g. loadable .note.gnu.build-id section causes it to
think that non-loadable .note.Linux section is loaded at address 0,
which in turn causes NULL pointers to be resolved to bogus symbols.  So
keep using the white list approach for the time being.

Link: http://lkml.kernel.org/r/20191028152734.13065-1-iii@linux.ibm.com
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: stm32: sai: add restriction on mmap support

[ Upstream commit eaf072e512d54c95b0977eda06cbca3151ace1e5 ]

Do not support mmap in S/PDIF mode. In S/PDIF mode
the buffer has to be copied, to allow the channel status
bits insertion.

Signed-off-by: Olivier Moysan <olivier.moysan@st.com>
Link: https://lore.kernel.org/r/20191104133654.28750-1-olivier.moysan@st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

watchdog: meson: Fix the wrong value of left time

[ Upstream commit 2c77734642d52448aca673e889b39f981110828b ]

The left time value is wrong when we get it by sysfs. The left time value
should be equal to preset timeout value minus elapsed time value. According
to the Meson-GXB/GXL datasheets which can be found at [0], the timeout value
is saved to BIT[0-15] of the WATCHDOG_TCNT, and elapsed time value is saved
to BIT[16-31] of the WATCHDOG_TCNT.

[0]: http://linux-meson.com

Fixes: 683fa50f0e18 ("watchdog: Add Meson GXBB Watchdog Driver")
Signed-off-by: Xingyu Chen <xingyu.chen@amlogic.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

can: mcp251x: mcp251x_restart_work_handler(): Fix potential force_quit race condition

[ Upstream commit 27a0e54bae09d2dd023a01254db506d61cc50ba1 ]

In mcp251x_restart_work_handler() the variable to stop the interrupt
handler (priv->force_quit) is reset after the chip is restarted and thus
a interrupt might occur.

This patch fixes the potential race condition by resetting force_quit
before enabling interrupts.

Signed-off-by: Timo Schlüßler <schluessler@krause.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

can: flexcan: increase error counters if skb enqueueing via can_rx_offload_queue_sorted() fails

[ Upstream commit 758124335a9dd649ab820bfb5b328170919ee7dc ]

The call to can_rx_offload_queue_sorted() may fail and return an error
(in the current implementation due to resource shortage). The passed skb
is consumed.

This patch adds incrementing of the appropriate error counters to let
the device statistics reflect that there's a problem.

Reported-by: Martin Hundebøll <martin@geanix.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

can: rx-offload: can_rx_offload_irq_offload_fifo(): continue on error

[ Upstream commit 1f7f504dcd9d1262437bdcf4fa071e41dec1af03 ]

In case of a resource shortage, i.e. the rx_offload queue will overflow
or a skb fails to be allocated (due to OOM),
can_rx_offload_offload_one() will call mailbox_read() to discard the
mailbox and return an ERR_PTR.

If the hardware FIFO is empty can_rx_offload_offload_one() will return
NULL.

In case a CAN frame was read from the hardware,
can_rx_offload_offload_one() returns the skb containing it.

Without this patch can_rx_offload_irq_offload_fifo() bails out if no skb
returned, regardless of the reason.

Similar to can_rx_offload_irq_offload_timestamp() in case of a resource
shortage the whole FIFO should be discarded, to avoid an IRQ storm and
give the system some time to recover. However if the FIFO is empty the
loop can be left.

With this patch the loop is left in case of empty FIFO, but not on
errors.

Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

can: rx-offload: can_rx_offload_irq_offload_timestamp(): continue on error

[ Upstream commit c2a9f74c9d18acfdcabd3361adc7eac82c537a66 ]

In case of a resource shortage, i.e. the rx_offload queue will overflow
or a skb fails to be allocated (due to OOM),
can_rx_offload_offload_one() will call mailbox_read() to discard the
mailbox and return an ERR_PTR.

However can_rx_offload_irq_offload_timestamp() bails out in the error
case. In case of a resource shortage all mailboxes should be discarded,
to avoid an IRQ storm and give the system some time to recover.

Since can_rx_offload_irq_offload_timestamp() is typically called from a
while loop, all message will eventually be discarded. So let's continue
on error instead to discard them directly.

Signed-off-by: Jeroen Hofstee <jhofstee@victronenergy.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

can: rx-offload: can_rx_offload_offload_one(): use ERR_PTR() to propagate error value in case of errors

[ Upstream commit d763ab3044f0bf50bd0e6179f6b2cf1c125d1d94 ]

Before this patch can_rx_offload_offload_one() returns a pointer to a
skb containing the read CAN frame or a NULL pointer.

However the meaning of the NULL pointer is ambiguous, it can either mean
the requested mailbox is empty or there was an error.

This patch fixes this situation by returning:
- pointer to skb on success
- NULL pointer if mailbox is empty
- ERR_PTR() in case of an error

All users of can_rx_offload_offload_one() have been adopted, no
functional change intended.

Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

can: rx-offload: can_rx_offload_offload_one(): increment rx_fifo_errors on queue overflow or OOM

[ Upstream commit 4e9016bee3bf0c24963097edace034ff205b565c ]

If the rx-offload skb_queue is full or the skb allocation fails (due to OOM),
the mailbox contents is discarded.

This patch adds the incrementing of the rx_fifo_errors statistics counter.

Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

can: rx-offload: can_rx_offload_offload_one(): do not increase the skb_queue beyond skb_queue_len_max

[ Upstream commit a2dc3f5e1022a5ede8af9ab89a144f1e69db8636 ]

The skb_queue is a linked list, holding the skb to be processed in the
next NAPI call.

Without this patch, the queue length in can_rx_offload_offload_one() is
limited to skb_queue_len_max + 1. As the skb_queue is a linked list, no
array or other resources are accessed out-of-bound, however this
behaviour is counterintuitive.

This patch limits the rx-offload skb_queue length to skb_queue_len_max.

Fixes: d254586c3453 ("can: rx-offload: Add support for HW fifo based irq offloading")
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

can: rx-offload: can_rx_offload_queue_tail(): fix error handling, avoid skb mem leak

[ Upstream commit 6caf8a6d6586d44fd72f4aa1021d14aa82affafb ]

If the rx-offload skb_queue is full can_rx_offload_queue_tail() will not
queue the skb and return with an error.

This patch frees the skb in case of a full queue, which brings
can_rx_offload_queue_tail() in line with the
can_rx_offload_queue_sorted() function, which has been adjusted in the
previous patch.

The return value is adjusted to -ENOBUFS to better reflect the actual
problem.

The device stats handling is left to the caller.

Fixes: d254586c3453 ("can: rx-offload: Add support for HW fifo based irq offloading")
Reported-by: Kurt Van Dijck <dev.kurt@vandijck-laurijssen.be>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

can: c_can: D_CAN: c_can_chip_config(): perform a sofware reset on open

[ Upstream commit 23c5a9488f076bab336177cd1d1a366bd8ddf087 ]

When the CAN interface is closed it the hardwre is put in power down
mode, but does not reset the error counters / state. Reset the D_CAN on
open, so the reported state and the actual state match.

According to [1], the C_CAN module doesn't have the software reset.

[1] http://www.bosch-semiconductors.com/media/ip_modules/pdf_2/c_can_fd8/users_manual_c_can_fd8_r210_1.pdf

Signed-off-by: Jeroen Hofstee <jhofstee@victronenergy.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

can: peak_usb: report bus recovery as well

[ Upstream commit 128a1b87d3ceb2ba449d5aadb222fe22395adeb0 ]

While the state changes are reported when the error counters increase
and decrease, there is no event when the bus recovers and the error
counters decrease again. So add those as well.

Change the state going downward to be ERROR_PASSIVE -> ERROR_WARNING ->
ERROR_ACTIVE instead of directly to ERROR_ACTIVE again.

Signed-off-by: Jeroen Hofstee <jhofstee@victronenergy.com>
Cc: Stephane Grosjean <s.grosjean@peak-system.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bridge: ebtables: don't crash when using dnat target in output chains

[ Upstream commit b23c0742c2ce7e33ed79d10e451f70fdb5ca85d1 ]

xt_in() returns NULL in the output hook, skip the pkt_type change for
that case, redirection only makes sense in broute/prerouting hooks.

Reported-by: Tom Yan <tom.ty89@gmail.com>
Cc: Linus Lüssing <linus.luessing@c0d3.blue>
Fixes: cf3cb246e277d ("bridge: ebtables: fix reception of frames DNAT-ed to bridge device/port")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: fec: add missed clk_disable_unprepare in remove

[ Upstream commit c43eab3eddb4c6742ac20138659a9b701822b274 ]

This driver forgets to disable and unprepare clks when remove.
Add calls to clk_disable_unprepare to fix it.

Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: ti: clkctrl: Fix failed to enable error with double udelay timeout

[ Upstream commit 81a41901ffd46bac6df4c95b8290ac259e0feda8 ]

Commit 3d8598fb9c5a ("clk: ti: clkctrl: use fallback udelay approach if
timekeeping is suspended") added handling for cases when timekeeping is
suspended. But looks like we can still get occasional "failed to enable"
errors on the PM runtime resume path with udelay() returning faster than
expected.

With ti-sysc interconnect target module driver this leads into device
failure with PM runtime failing with "failed to enable" clkctrl error.

Let's fix the issue with a delay of two times the desired delay as in
often done for udelay() to account for the inaccuracy.

Fixes: 3d8598fb9c5a ("clk: ti: clkctrl: use fallback udelay approach if timekeeping is suspended")
Cc: Keerthy <j-keerthy@ti.com>
Cc: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Link: https://lkml.kernel.org/r/20190930154001.46581-1-tony@atomide.com
Tested-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: ti: dra7-atl-clock: Remove ti_clk_add_alias call

[ Upstream commit 9982b0f69b49931b652d35f86f519be2ccfc7027 ]

ti_clk_register() calls it already so the driver should not create
duplicated alias.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lkml.kernel.org/r/20191002083436.10194-1-peter.ujfalusi@ti.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86/resctrl: Prevent NULL pointer dereference when reading mondata

[ Upstream commit 26467b0f8407cbd628fa5b7bcfd156e772004155 ]

When a mon group is being deleted, rdtgrp->flags is set to RDT_DELETED
in rdtgroup_rmdir_mon() firstly. The structure of rdtgrp will be freed
until rdtgrp->waitcount is dropped to 0 in rdtgroup_kn_unlock() later.

During the window of deleting a mon group, if an application calls
rdtgroup_mondata_show() to read mondata under this mon group,
'rdtgrp' returned from rdtgroup_kn_lock_live() is a NULL pointer when
rdtgrp->flags is RDT_DELETED. And then 'rdtgrp' is passed in this path:
rdtgroup_mondata_show() --> mon_event_read() --> mon_event_count().
Thus it results in NULL pointer dereference in mon_event_count().

Check 'rdtgrp' in rdtgroup_mondata_show(), and return -ENOENT
immediately when reading mondata during the window of deleting a mon
group.

Fixes: d89b7379015f ("x86/intel_rdt/cqm: Add mon_data")
Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Fenghua Yu <fenghua.yu@intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: pei.p.jia@intel.com
Cc: Reinette Chatre <reinette.chatre@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86-ml <x86@kernel.org>
Link: https://lkml.kernel.org/r/1572326702-27577-1-git-send-email-xiaochen.shen@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

idr: Fix idr_alloc_u32 on 32-bit systems

[ Upstream commit b7e9728f3d7fc5c5c8508d99f1675212af5cfd49 ]

Attempting to allocate an entry at 0xffffffff when one is already
present would succeed in allocating one at 2^32, which would confuse
everything.  Return -ENOSPC in this case, as expected.

Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

idr: Fix integer overflow in idr_for_each_entry

[ Upstream commit f6341c5af4e6e15041be39976d16deca789555fa ]

If there is an entry at INT_MAX then idr_for_each_entry() will increment
id after handling it.  This is undefined behaviour, and is caught by
UBSAN.  Adding 1U to id forces the operation to be carried out as an
unsigned addition which (when assigned to id) will result in INT_MIN.
Since there is never an entry stored at INT_MIN, idr_get_next() will
return NULL, ending the loop as expected.

Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/bpf: Fix tail call implementation

[ Upstream commit 7de086909365cd60a5619a45af3f4152516fd75c ]

We have seen many crashes on powerpc hosts while loading bpf programs.

The problem here is that bpf_int_jit_compile() does a first pass
to compute the program length.

Then it allocates memory to store the generated program and
calls bpf_jit_build_body() a second time (and a third time
later)

What I have observed is that the second bpf_jit_build_body()
could end up using few more words than expected.

If bpf_jit_binary_alloc() put the space for the program
at the end of the allocated page, we then write on
a non mapped memory.

It appears that bpf_jit_emit_tail_call() calls
bpf_jit_emit_common_epilogue() while ctx->seen might not
be stable.

Only after the second pass we can be sure ctx->seen wont be changed.

Trying to avoid a second pass seems quite complex and probably
not worth it.

Fixes: ce0761419faef ("powerpc/bpf: Implement support for tail calls")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Naveen N. Rao <naveen.n.rao@linux.ibm.com>
Cc: Sandipan Das <sandipan@linux.ibm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20191101033444.143741-1-edumazet@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

samples/bpf: fix build by setting HAVE_ATTR_TEST to zero

[ Upstream commit 04ec044b7d30800296824783df7d9728d16d7567 ]

To remove that test_attr__{enabled/open} are used by perf-sys.h, we
set HAVE_ATTR_TEST to zero.

Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Tested-by: KP Singh <kpsingh@google.com>
Acked-by: Song Liu <songliubraving@fb.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: bpf@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: http://lore.kernel.org/bpf/20191001113307.27796-3-bjorn.topel@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: sun8i-a83t-tbs-a711: Fix WiFi resume from suspend

[ Upstream commit e614f341253f8541baf0230a8dc6a016b544b1e2 ]

Without enabling keep-power-in-suspend, we can't wake the device
up using WOL packet, and the log is flooded with these messages
on resume:

sunxi-mmc 1c10000.mmc: send stop command failed
sunxi-mmc 1c10000.mmc: data error, sending stop command
sunxi-mmc 1c10000.mmc: send stop command failed
sunxi-mmc 1c10000.mmc: data error, sending stop command

So to make the WiFi really a wakeup-source, we need to keep it powered
during suspend.

Fixes: 0e23372080def7 ("arm: dts: sun8i: Add the TBS A711 tablet devicetree")
Signed-off-by: Ondrej Jirman <megous@megous.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: sunxi-ng: a80: fix the zero'ing of bits 16 and 18

[ Upstream commit cdfc2e2086bf9c465f44e2db25561373b084a113 ]

The zero'ing of bits 16 and 18 is incorrect. Currently the code
is masking with the bitwise-and of BIT(16) & BIT(18) which is
0, so the updated value for val is always zero. Fix this by bitwise
and-ing value with the correct mask that will zero bits 16 and 18.

Addresses-Coverity: (" Suspicious &= or |= constant expression")
Fixes: b8eb71dcdd08 ("clk: sunxi-ng: Add A80 CCU")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: sunxi: Fix operator precedence in sunxi_divs_clk_setup

[ Upstream commit afdc74ed2d57e86c10b1d6831339770a802bab9a ]

r375326 in Clang exposes an issue with operator precedence in
sunxi_div_clk_setup:

drivers/clk/sunxi/clk-sunxi.c:1083:30: warning: operator '?:' has lower
precedence than '|'; '|' will be evaluated first
[-Wbitwise-conditional-parentheses]
                                                 data->div[i].critical ?
                                                 ~~~~~~~~~~~~~~~~~~~~~ ^
drivers/clk/sunxi/clk-sunxi.c:1083:30: note: place parentheses around
the '|' expression to silence this warning
                                                 data->div[i].critical ?
                                                                       ^
                                                                      )
drivers/clk/sunxi/clk-sunxi.c:1083:30: note: place parentheses around
the '?:' expression to evaluate it first
                                                 data->div[i].critical ?
                                                                       ^
                                                 (
1 warning generated.

It appears that the intention was for ?: to be evaluated first so that
CLK_IS_CRITICAL could be added to clkflags if the critical boolean was
set; right now, | is being evaluated first. Add parentheses around the
?: block to have it be evaluated first.

Fixes: 9919d44ff297 ("clk: sunxi: Use CLK_IS_CRITICAL flag for critical clks")
Link: https://github.com/ClangBuiltLinux/linux/issues/745
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: at91: avoid sleeping early

[ Upstream commit 658fd65cf0b0d511de1718e48d9a28844c385ae0 ]

It is not allowed to sleep to early in the boot process and this may lead
to kernel issues if the bootloader didn't prepare the slow clock and main
clock.

This results in the following error and dump stack on the AriettaG25:
   bad: scheduling from the idle thread!

Ensure it is possible to sleep, else simply have a delay.

Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lkml.kernel.org/r/20190920153906.20887-1-alexandre.belloni@bootlin.com
Fixes: 80eded6ce8bb ("clk: at91: add slow clks driver")
Tested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

reset: fix reset_control_ops kerneldoc comment

[ Upstream commit f430c7ed8bc22992ed528b518da465b060b9223f ]

Add a missing short description to the reset_control_ops documentation.

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
[p.zabel@pengutronix.de: rebased and updated commit message]
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: imx6qdl-sabreauto: Fix storm of accelerometer interrupts

[ Upstream commit 7e5d0bf6afcc7bd72f78e7f33570e2e0945624f0 ]

Since commit a211b8c55f3c ("ARM: dts: imx6qdl-sabreauto: Add sensors")
a storm of accelerometer interrupts is seen:

[  114.211283] irq 260: nobody cared (try booting with the "irqpoll" option)
[  114.218108] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.3.4 #1
[  114.223960] Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree)
[  114.230531] [<c0112858>] (unwind_backtrace) from [<c010cdc8>] (show_stack+0x10/0x14)
[  114.238301] [<c010cdc8>] (show_stack) from [<c0c1aa1c>] (dump_stack+0xd8/0x110)
[  114.245644] [<c0c1aa1c>] (dump_stack) from [<c0193594>] (__report_bad_irq+0x30/0xc0)
[  114.253417] [<c0193594>] (__report_bad_irq) from [<c01933ac>] (note_interrupt+0x108/0x298)
[  114.261707] [<c01933ac>] (note_interrupt) from [<c018ffe4>] (handle_irq_event_percpu+0x70/0x80)
[  114.270433] [<c018ffe4>] (handle_irq_event_percpu) from [<c019002c>] (handle_irq_event+0x38/0x5c)
[  114.279326] [<c019002c>] (handle_irq_event) from [<c019438c>] (handle_level_irq+0xc8/0x154)
[  114.287701] [<c019438c>] (handle_level_irq) from [<c018eda0>] (generic_handle_irq+0x20/0x34)
[  114.296166] [<c018eda0>] (generic_handle_irq) from [<c0534214>] (mxc_gpio_irq_handler+0x30/0xf0)
[  114.304975] [<c0534214>] (mxc_gpio_irq_handler) from [<c0534334>] (mx3_gpio_irq_handler+0x60/0xb0)
[  114.313955] [<c0534334>] (mx3_gpio_irq_handler) from [<c018eda0>] (generic_handle_irq+0x20/0x34)
[  114.322762] [<c018eda0>] (generic_handle_irq) from [<c018f3ac>] (__handle_domain_irq+0x64/0xe0)
[  114.331485] [<c018f3ac>] (__handle_domain_irq) from [<c05215a8>] (gic_handle_irq+0x4c/0xa8)
[  114.339862] [<c05215a8>] (gic_handle_irq) from [<c0101a70>] (__irq_svc+0x70/0x98)
[  114.347361] Exception stack(0xc1301ec0 to 0xc1301f08)
[  114.352435] 1ec0: 00000001 00000006 00000000 c130c340 00000001 c130f688 9785636d c13ea2e8
[  114.360635] 1ee0: 9784907d 0000001a eaf99d78 0000001a 00000000 c1301f10 c0182b00 c0878de4
[  114.368830] 1f00: 20000013 ffffffff
[  114.372349] [<c0101a70>] (__irq_svc) from [<c0878de4>] (cpuidle_enter_state+0x168/0x5f4)
[  114.380464] [<c0878de4>] (cpuidle_enter_state) from [<c08792ac>] (cpuidle_enter+0x28/0x38)
[  114.388751] [<c08792ac>] (cpuidle_enter) from [<c015ef9c>] (do_idle+0x224/0x2a8)
[  114.396168] [<c015ef9c>] (do_idle) from [<c015f3b8>] (cpu_startup_entry+0x18/0x20)
[  114.403765] [<c015f3b8>] (cpu_startup_entry) from [<c1200e54>] (start_kernel+0x43c/0x500)
[  114.411958] handlers:
[  114.414302] [<a01028b8>] irq_default_primary_handler threaded [<fd7a3b08>] mma8452_interrupt
[  114.422974] Disabling IRQ #260

           CPU0       CPU1
....
260:     100001          0  gpio-mxc  31 Level     mma8451

The MMA8451 interrupt triggers as low level, so the GPIO6_IO31 pin
needs to activate its pull up, otherwise it will stay always at low level
generating multiple interrupts.

The current device tree does not configure the IOMUX for this pin, so
it uses whathever comes configured from the bootloader.

The IOMUXC_SW_PAD_CTL_PAD_EIM_BCLK register value comes as 0x8000 from
the bootloader, which has PKE bit cleared, hence disabling the
pull-up.

Instead of relying on a previous configuration from the bootloader,
configure the GPIO6_IO31 pin with pull-up enabled in order to fix
this problem.

Fixes: a211b8c55f3c ("ARM: dts: imx6qdl-sabreauto: Add sensors")
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-By: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pinctrl: cherryview: Allocate IRQ chip dynamic

[ Upstream commit 67d33aecd030226f0a577eb683aaa6853ecf8f91 ]

Keeping the IRQ chip definition static shares it with multiple instances
of the GPIO chip in the system. This is bad and now we get this warning
from GPIO library:

"detected irqchip that is shared with multiple gpiochips: please fix the driver."

Hence, move the IRQ chip definition from being driver static into the struct
intel_pinctrl. So a unique IRQ chip is used for each GPIO chip instance.

This patch is heavily based on the attachment to the bug by Christoph Marz.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=202543
Fixes: 6e08d6bbebeb ("pinctrl: Add Intel Cherryview/Braswell pin controller support")
Depends-on: 83b9dc11312f ("pinctrl: cherryview: Associate IRQ descriptors to irqdomain")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: samsung: exynos5420: Preserve PLL configuration during suspend/resume

[ Upstream commit e9323b664ce29547d996195e8a6129a351c39108 ]

Properly save and restore all top PLL related configuration registers
during suspend/resume cycle. So far driver only handled EPLL and RPLL
clocks, all other were reset to default values after suspend/resume cycle.
This caused for example lower G3D (MALI Panfrost) performance after system
resume, even if performance governor has been selected.

Reported-by: Reported-by: Marian Mihailescu <mihailescu2m@gmail.com>
Fixes: 773424326b51 ("clk: samsung: exynos5420: add more registers to restore list")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: kirkwood: fix device remove ordering

[ Upstream commit dc39596a906d5b604f4e64597b6e904fc14625e8 ]

The devm conversion of kirkwood was incorrect; on removal, devm takes
effect after the "remove" function has returned.  So, the effect of
the conversion was to change the order during remove from:

  - snd_soc_unregister_component() (unpublishes interfaces)
  - clk_disable_unprepare()
  - cleanup resources

After the conversion, this became:

  - clk_disable_unprepare() - while the device may still be active
  - snd_soc_unregister_component()
  - cleanup resources

Hence, it introduces a bug, where the internal clock for the device
may be shut down before the device itself has been shut down.  It is
known that Marvell SoCs, including Dove, locks up if registers for a
peripheral that has its clocks disabled are accessed.

Fixes: f98fc0f8154e ("ASoC: kirkwood: replace platform to component")
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/E1iNGyP-0004oN-BA@rmk-PC.armlinux.org.uk
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: kirkwood: fix external clock probe defer

[ Upstream commit 4523817d51bc3b2ef38da768d004fda2c8bc41de ]

When our call to get the external clock fails, we forget to clean up
the enabled internal clock correctly.  Enable the clock after we have
obtained all our resources.

Fixes: 84aac6c79bfd ("ASoC: kirkwood: fix loss of external clock at probe time")
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/E1iNGyK-0004oF-6A@rmk-PC.armlinux.org.uk
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: samsung: exynos5433: Fix error paths

[ Upstream commit faac3604d05e8015567124e5ee79edc3f1568a89 ]

Add checking the value returned by samsung_clk_alloc_reg_dump() and
devm_kcalloc(). While fixing this, also release all gathered clocks.

Fixes: 523d3de41f02 ("clk: samsung: exynos5433: Add support for runtime PM")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
[s.nawrocki: squashed patch from K. Kozlowski adding missing slab.h header]
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

reset: Fix memory leak in reset_control_array_put()

[ Upstream commit 532f9cd6ee994ed10403e856ca27501428048597 ]

Memory allocated for 'struct reset_control_array' in
of_reset_control_array_get() is never freed in
reset_control_array_put() resulting in kmemleak showing
the following backtrace.

  backtrace:
    [<00000000c5f17595>] __kmalloc+0x1b0/0x2b0
    [<00000000bd499e13>] of_reset_control_array_get+0xa4/0x180
    [<000000004cc02754>] 0xffff800008c669e4
    [<0000000050a83b24>] platform_drv_probe+0x50/0xa0
    [<00000000d3a0b0bc>] really_probe+0x108/0x348
    [<000000005aa458ac>] driver_probe_device+0x58/0x100
    [<000000008853626c>] device_driver_attach+0x6c/0x90
    [<0000000085308d19>] __driver_attach+0x84/0xc8
    [<00000000080d35f2>] bus_for_each_dev+0x74/0xc8
    [<00000000dd7f015b>] driver_attach+0x20/0x28
    [<00000000923ba6e6>] bus_add_driver+0x148/0x1f0
    [<0000000061473b66>] driver_register+0x60/0x110
    [<00000000c5bec167>] __platform_driver_register+0x40/0x48
    [<000000007c764b4f>] 0xffff800008c6c020
    [<0000000047ec2e8c>] do_one_initcall+0x5c/0x1b0
    [<0000000093d4b50d>] do_init_module+0x54/0x1d0

Fixes: 17c82e206d2a ("reset: Add APIs to manage array of resets")
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: compress: fix unsigned integer overflow check

[ Upstream commit d3645b055399538415586ebaacaedebc1e5899b0 ]

Parameter fragments and fragment_size are type of u32. U32_MAX is
the correct check.

Signed-off-by: Xiaojun Sang <xsang@codeaurora.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20191021095432.5639-1-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: msm8916-wcd-analog: Fix RX1 selection in RDAC2 MUX

[ Upstream commit 9110d1b0e229cebb1ffce0c04db2b22beffd513d ]

According to the PM8916 Hardware Register Description,
CDC_D_CDC_CONN_HPHR_DAC_CTL has only a single bit (RX_SEL)
to switch between RX1 (0) and RX2 (1). It is not possible to
disable it entirely to achieve the "ZERO" state.

However, at the moment the "RDAC2 MUX" mixer defines three possible
values ("ZERO", "RX2" and "RX1"). Setting the mixer to "ZERO"
actually configures it to RX1. Setting the mixer to "RX1" has
(seemingly) no effect.

Remove "ZERO" and replace it with "RX1" to fix this.

Fixes: 585e881e5b9e ("ASoC: codecs: Add msm8916-wcd analog codec")
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20191020153007.206070-1-stephan@gerhold.net
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clocksource/drivers/mediatek: Fix error handling

[ Upstream commit 41d49e7939de5ec532d86494185b2ca2e99c848a ]

When timer_of_init fails, it cleans up after itself by undoing
everything it did during the initialization function.

mtk_syst_init and mtk_gpt_init both call timer_of_cleanup if
timer_of_init fails. timer_of_cleanup try to release the resource
taken.  Since these resources have already been cleaned up by
timer_of_init, we end up getting a few warnings printed:

[    0.001935] WARNING: CPU: 0 PID: 0 at __clk_put+0xe8/0x128
[    0.002650] Modules linked in:
[    0.003058] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.19.67+ #1
[    0.003852] Hardware name: MediaTek MT8183 (DT)
[    0.004446] pstate: 20400085 (nzCv daIf +PAN -UAO)
[    0.005073] pc : __clk_put+0xe8/0x128
[    0.005555] lr : clk_put+0xc/0x14
[    0.005988] sp : ffffff80090b3ea0
[    0.006422] x29: ffffff80090b3ea0 x28: 0000000040e20018
[    0.007121] x27: ffffffc07bfff780 x26: 0000000000000001
[    0.007819] x25: ffffff80090bda80 x24: ffffff8008ec5828
[    0.008517] x23: ffffff80090bd000 x22: ffffff8008d8b2e8
[    0.009216] x21: 0000000000000001 x20: fffffffffffffdfb
[    0.009914] x19: ffffff8009166180 x18: 00000000002bffa8
[    0.010612] x17: ffffffc012996980 x16: 0000000000000000
[    0.011311] x15: ffffffbf004a6800 x14: 3536343038393334
[    0.012009] x13: 2079726576652073 x12: 7eb9c62c5c38f100
[    0.012707] x11: ffffff80090b3ba0 x10: ffffff80090b3ba0
[    0.013405] x9 : 0000000000000004 x8 : 0000000000000040
[    0.014103] x7 : ffffffc079400270 x6 : 0000000000000000
[    0.014801] x5 : ffffffc079400248 x4 : 0000000000000000
[    0.015499] x3 : 0000000000000000 x2 : 0000000000000000
[    0.016197] x1 : ffffff80091661c0 x0 : fffffffffffffdfb
[    0.016896] Call trace:
[    0.017218]  __clk_put+0xe8/0x128
[    0.017654]  clk_put+0xc/0x14
[    0.018048]  timer_of_cleanup+0x60/0x7c
[    0.018551]  mtk_syst_init+0x8c/0x9c
[    0.019020]  timer_probe+0x6c/0xe0
[    0.019469]  time_init+0x14/0x44
[    0.019893]  start_kernel+0x2d0/0x46c
[    0.020378] ---[ end trace 8c1efabea1267649 ]---
[    0.020982] ------------[ cut here ]------------
[    0.021586] Trying to vfree() nonexistent vm area ((____ptrval____))
[    0.022427] WARNING: CPU: 0 PID: 0 at __vunmap+0xd0/0xd8
[    0.023119] Modules linked in:
[    0.023524] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G        W         4.19.67+ #1
[    0.024498] Hardware name: MediaTek MT8183 (DT)
[    0.025091] pstate: 60400085 (nZCv daIf +PAN -UAO)
[    0.025718] pc : __vunmap+0xd0/0xd8
[    0.026176] lr : __vunmap+0xd0/0xd8
[    0.026632] sp : ffffff80090b3e90
[    0.027066] x29: ffffff80090b3e90 x28: 0000000040e20018
[    0.027764] x27: ffffffc07bfff780 x26: 0000000000000001
[    0.028462] x25: ffffff80090bda80 x24: ffffff8008ec5828
[    0.029160] x23: ffffff80090bd000 x22: ffffff8008d8b2e8
[    0.029858] x21: 0000000000000000 x20: 0000000000000000
[    0.030556] x19: ffffff800800d000 x18: 00000000002bffa8
[    0.031254] x17: 0000000000000000 x16: 0000000000000000
[    0.031952] x15: ffffffbf004a6800 x14: 3536343038393334
[    0.032651] x13: 2079726576652073 x12: 7eb9c62c5c38f100
[    0.033349] x11: ffffff80090b3b40 x10: ffffff80090b3b40
[    0.034047] x9 : 0000000000000005 x8 : 5f5f6c6176727470
[    0.034745] x7 : 5f5f5f5f28282061 x6 : ffffff80091c86ef
[    0.035443] x5 : ffffff800852b690 x4 : 0000000000000000
[    0.036141] x3 : 0000000000000002 x2 : 0000000000000002
[    0.036839] x1 : 7eb9c62c5c38f100 x0 : 7eb9c62c5c38f100
[    0.037536] Call trace:
[    0.037859]  __vunmap+0xd0/0xd8
[    0.038271]  vunmap+0x24/0x30
[    0.038664]  __iounmap+0x2c/0x34
[    0.039088]  timer_of_cleanup+0x70/0x7c
[    0.039591]  mtk_syst_init+0x8c/0x9c
[    0.040060]  timer_probe+0x6c/0xe0
[    0.040507]  time_init+0x14/0x44
[    0.040932]  start_kernel+0x2d0/0x46c

This commit remove the calls to timer_of_cleanup when timer_of_init
fails since it is unnecessary and actually cause warnings to be printed.

Fixes: a0858f937960 ("mediatek: Convert the driver to timer-of")
Signed-off-by: Fabien Parent <fparent@baylibre.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/linux-arm-kernel/20190919191315.25190-1-fparent@baylibre.com/
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: meson: gxbb: let sar_adc_clk_div set the parent clock rate

[ Upstream commit 44b09b11b813b8550e6b976ea51593bc23bba8d1 ]

The meson-saradc driver manually sets the input clock for
sar_adc_clk_sel. Update the GXBB clock driver (which is used on GXBB,
GXL and GXM) so the rate settings on sar_adc_clk_div are propagated up
to sar_adc_clk_sel which will let the common clock framework select the
best matching parent clock if we want that.

This makes sar_adc_clk_div consistent with the axg-aoclk and g12a-aoclk
drivers, which both also specify CLK_SET_RATE_PARENT.

Fixes: 33d0fcdfe0e870 ("clk: gxbb: add the SAR ADC clocks and expose them")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Linux 4.19.87

PM / devfreq: Fix kernel oops on governor module load

commit 7544fd7f384591038646d3cd9efb311ab4509e24 upstream.

A bit unexpectedly (but still documented), request_module may
return a positive value, in case of a modprobe error.
This is currently causing issues in the devfreq framework.

When a request_module exits with a positive value, we currently
return that via ERR_PTR. However, because the value is positive,
it's not a ERR_VALUE proper, and is therefore treated as a
valid struct devfreq_governor pointer, leading to a kernel oops.

Fix this by returning -EINVAL if request_module returns a positive
value.

Fixes: b53b0128052ff ("PM / devfreq: Fix static checker warning in try_then_request_governor")
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Cc: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: PPC: Book3S HV: Flush link stack on guest exit to host kernel

commit af2e8c68b9c5403f77096969c516f742f5bb29e0 upstream.

On some systems that are vulnerable to Spectre v2, it is up to
software to flush the link stack (return address stack), in order to
protect against Spectre-RSB.

When exiting from a guest we do some house keeping and then
potentially exit to C code which is several stack frames deep in the
host kernel. We will then execute a series of returns without
preceeding calls, opening up the possiblity that the guest could have
poisoned the link stack, and direct speculative execution of the host
to a gadget of some sort.

To prevent this we add a flush of the link stack on exit from a guest.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
[dja: straightforward backport to v4.19]
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/book3s64: Fix link stack flush on context switch

commit 39e72bf96f5847ba87cc5bd7a3ce0fed813dc9ad upstream.

In commit ee13cb249fab ("powerpc/64s: Add support for software count
cache flush"), I added support for software to flush the count
cache (indirect branch cache) on context switch if firmware told us
that was the required mitigation for Spectre v2.

As part of that code we also added a software flush of the link
stack (return address stack), which protects against Spectre-RSB
between user processes.

That is all correct for CPUs that activate that mitigation, which is
currently Power9 Nimbus DD2.3.

What I got wrong is that on older CPUs, where firmware has disabled
the count cache, we also need to flush the link stack on context
switch.

To fix it we create a new feature bit which is not set by firmware,
which tells us we need to flush the link stack. We set that when
firmware tells us that either of the existing Spectre v2 mitigations
are enabled.

Then we adjust the patching code so that if we see that feature bit we
enable the link stack flush. If we're also told to flush the count
cache in software then we fall through and do that also.

On the older CPUs we don't need to do do the software count cache
flush, firmware has disabled it, so in that case we patch in an early
return after the link stack flush.

The naming of some of the functions is awkward after this patch,
because they're called "count cache" but they also do link stack. But
we'll fix that up in a later commit to ease backporting.

This is the fix for CVE-2019-18660.

Reported-by: Anthony Steinhauser <asteinhauser@google.com>
Fixes: ee13cb249fab ("powerpc/64s: Add support for software count cache flush")
Cc: stable@vger.kernel.org # v4.4+
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/64s: support nospectre_v2 cmdline option

commit d8f0e0b073e1ec52a05f0c2a56318b47387d2f10 upstream.

Add support for disabling the kernel implemented spectre v2 mitigation
(count cache flush on context switch) via the nospectre_v2 and
mitigations=off cmdline options.

Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Christopher M. Riedl <cmr@informatik.wtf>
Reviewed-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190524024647.381-1-cmr@informatik.wtf
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: usbduxfast: usbduxfast_ai_cmdtest rounding error

commit 5618332e5b955b4bff06d0b88146b971c8dd7b32 upstream.

The userspace comedilib function 'get_cmd_generic_timed' fills
the cmd structure with an informed guess and then calls the
function 'usbduxfast_ai_cmdtest' in this driver repeatedly while
'usbduxfast_ai_cmdtest' is modifying the cmd struct until it
no longer changes. However, because of rounding errors this never
converged because 'steps = (cmd->convert_arg * 30) / 1000' and then
back to 'cmd->convert_arg = (steps * 1000) / 30' won't be the same
because of rounding errors. 'Steps' should only be converted back to
the 'convert_arg' if 'steps' has actually been modified. In addition
the case of steps being 0 wasn't checked which is also now done.

Signed-off-by: Bernd Porr <mail@berndporr.me.uk>
Cc: <stable@vger.kernel.org> # 4.4+
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20191118230759.1727-1-mail@berndporr.me.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: option: add support for Foxconn T77W968 LTE modules

commit f0797095423e6ea3b4be61134ee353c7f504d440 upstream.

These are the Foxconn-branded variants of the Dell DW5821e modules,
same USB layout as those. The device exposes AT, NMEA and DIAG ports
in both USB configurations.

P:  Vendor=0489 ProdID=e0b4 Rev=03.18
S:  Manufacturer=FII
S:  Product=T77W968 LTE
S:  SerialNumber=0123456789ABCDEF
C:  #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA
I:  If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
I:  If#=0x1 Alt= 0 #EPs= 1 Cls=03(HID  ) Sub=00 Prot=00 Driver=usbhid
I:  If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option

P:  Vendor=0489 ProdID=e0b4 Rev=03.18
S:  Manufacturer=FII
S:  Product=T77W968 LTE
S:  SerialNumber=0123456789ABCDEF
C:  #Ifs= 7 Cfg#= 2 Atr=a0 MxPwr=500mA
I:  If#=0x0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim
I:  If#=0x1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
I:  If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
I:  If#=0x6 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)

Signed-off-by: Aleksander Morgado <aleksander@aleksander.es>
[ johan: drop id defines ]
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: option: add support for DW5821e with eSIM support

commit 957c31ea082e3fe5196f46d5b04018b10de47400 upstream.

The device exposes AT, NMEA and DIAG ports in both USB configurations.
Exactly same layout as the default DW5821e module, just a different
vid/pid.

P:  Vendor=413c ProdID=81e0 Rev=03.18
S:  Manufacturer=Dell Inc.
S:  Product=DW5821e-eSIM Snapdragon X20 LTE
S:  SerialNumber=0123456789ABCDEF
C:  #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA
I:  If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
I:  If#=0x1 Alt= 0 #EPs= 1 Cls=03(HID  ) Sub=00 Prot=00 Driver=usbhid
I:  If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option

P:  Vendor=413c ProdID=81e0 Rev=03.18
S:  Manufacturer=Dell Inc.
S:  Product=DW5821e-eSIM Snapdragon X20 LTE
S:  SerialNumber=0123456789ABCDEF
C:  #Ifs= 7 Cfg#= 2 Atr=a0 MxPwr=500mA
I:  If#=0x0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim
I:  If#=0x1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
I:  If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
I:  If#=0x6 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)

Signed-off-by: Aleksander Morgado <aleksander@aleksander.es>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: mos7840: fix remote wakeup

commit 92fe35fb9c70a00d8fbbf5bd6172c921dd9c7815 upstream.

The driver was setting the device remote-wakeup feature during probe in
violation of the USB specification (which says it should only be set
just prior to suspending the device). This could potentially waste
power during suspend as well as lead to spurious wakeups.

Note that USB core would clear the remote-wakeup feature at first
resume.

Fixes: 3f5429746d91 ("USB: Moschip 7840 USB-Serial Driver")
Cc: stable <stable@vger.kernel.org> # 2.6.19
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: mos7720: fix remote wakeup

commit ea422312a462696093b5db59d294439796cba4ad upstream.

The driver was setting the device remote-wakeup feature during probe in
violation of the USB specification (which says it should only be set
just prior to suspending the device). This could potentially waste
power during suspend as well as lead to spurious wakeups.

Note that USB core would clear the remote-wakeup feature at first
resume.

Fixes: 0f64478cbc7a ("USB: add USB serial mos7720 driver")
Cc: stable <stable@vger.kernel.org> # 2.6.19
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: mos7840: add USB ID to support Moxa UPort 2210

commit e696d00e65e81d46e911f24b12e441037bf11b38 upstream.

Add USB ID for MOXA UPort 2210. This device contains mos7820 but
it passes GPIO0 check implemented by driver and it's detected as
mos7840. Hence product id check is added to force mos7820 mode.

Signed-off-by: Pavel Löbl <pavel@loebl.cz>
Cc: stable <stable@vger.kernel.org>
[ johan: rename id defines and add vendor-id check ]
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

appledisplay: fix error handling in the scheduled work

commit 91feb01596e5efc0cc922cc73f5583114dccf4d2 upstream.

The work item can operate on

1. stale memory left over from the last transfer
the actual length of the data transfered needs to be checked
2. memory already freed
the error handling in appledisplay_probe() needs
to cancel the work in that case

Reported-and-tested-by: syzbot+495dab1f175edc9c2f13@syzkaller.appspotmail.com
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191106124902.7765-1-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: chaoskey: fix error case of a timeout

commit 92aa5986f4f7b5a8bf282ca0f50967f4326559f5 upstream.

In case of a timeout or if a signal aborts a read
communication with the device needs to be ended
lest we overwrite an active URB the next time we
do IO to the device, as the URB may still be active.

Signed-off-by: Oliver Neukum <oneukum@suse.de>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191107142856.16774-1-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb-serial: cp201x: support Mark-10 digital force gauge

commit 347bc8cb26388791c5881a3775cb14a3f765a674 upstream.

Add support for the Mark-10 digital force gauge device to the cp201x
driver.

Based on a report and a larger patch from Joel Jennings

Reported-by: Joel Jennings <joel.jennings@makeitlabs.com>
Cc: stable <stable@vger.kernel.org>
Acked-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20191118092119.GA153852@kroah.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usbip: Fix uninitialized symbol 'nents' in stub_recv_cmd_submit()

commit 2a9125317b247f2cf35c196f968906dcf062ae2d upstream.

Smatch reported that nents is not initialized and used in
stub_recv_cmd_submit(). nents is currently initialized by sgl_alloc()
and used to allocate multiple URBs when host controller doesn't
support scatter-gather DMA. The use of uninitialized nents means that
buf_len is zero and use_sg is true. But buffer length should not be
zero when an URB uses scatter-gather DMA.

To prevent this situation, add the conditional that checks buf_len
and use_sg. And move the use of nents right after the sgl_alloc() to
avoid the use of uninitialized nents.

If the error occurs, it adds SDEV_EVENT_ERROR_MALLOC and stub_priv
will be released by stub event handler and connection will be shut
down.

Fixes: ea44d190764b ("usbip: Implement SG support to vhci-hcd and stub driver")
Reported-by: kbuild test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Suwan Kim <suwan.kim027@gmail.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191111141035.27788-1-suwan.kim027@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usbip: tools: fix fd leakage in the function of read_attr_usbip_status

commit 26a4d4c00f85cb844dd11dd35e848b079c2f5e8f upstream.

We should close the fd before the return of read_attr_usbip_status.

Fixes: 3391ba0e2792 ("usbip: tools: Extract generic code to be shared with vudc backend")
Signed-off-by: Hewenliang <hewenliang4@huawei.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191025043515.20053-1-hewenliang4@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USBIP: add config dependency for SGL_ALLOC

commit 1ec13abac58b6f24e32f0d3081ef4e7456e62ed8 upstream.

USBIP uses lib/scatterlist.h
Hence it needs to set CONFIG_SGL_ALLOC

Signed-off-by: Oliver Neukum <oneukum@suse.com>
Cc: stable <stable@vger.kernel.org>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20191112154939.21217-1-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

virtio_ring: fix return code on DMA mapping fails

[ Upstream commit f7728002c1c7bfa787b276a31c3ef458739b8e7c ]

Commit 780bc7903a32 ("virtio_ring: Support DMA APIs")  makes
virtqueue_add() return -EIO when we fail to map our I/O buffers. This is
a very realistic scenario for guests with encrypted memory, as swiotlb
may run out of space, depending on it's size and the I/O load.

The virtio-blk driver interprets -EIO form virtqueue_add() as an IO
error, despite the fact that swiotlb full is in absence of bugs a
recoverable condition.

Let us change the return code to -ENOMEM, and make the block layer
recover form these failures when virtio-blk encounters the condition
described above.

Cc: stable@vger.kernel.org
Fixes: 780bc7903a32 ("virtio_ring: Support DMA APIs")
Signed-off-by: Halil Pasic <pasic@linux.ibm.com>
Tested-by: Michael Mueller <mimu@linux.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: imon: invalid dereference in imon_touch_event

commit f3f5ba42c58d56d50f539854d8cc188944e96087 upstream.

The touch timer is set up in intf1. If the second interface does not exist,
the timer and touch input device are not setup and we get the following
error, when touch events are reported via intf0.

kernel BUG at kernel/time/timer.c:956!
invalid opcode: 0000 [#1] SMP KASAN
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.4.0-rc1+ #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:__mod_timer kernel/time/timer.c:956 [inline]
RIP: 0010:__mod_timer kernel/time/timer.c:949 [inline]
RIP: 0010:mod_timer+0x5a2/0xb50 kernel/time/timer.c:1100
Code: 45 10 c7 44 24 14 ff ff ff ff 48 89 44 24 08 48 8d 45 20 48 c7 44 24 18 00 00 00 00 48 89 04 24 e9 5a fc ff ff e8 ae ce 0e 00 <0f> 0b e8 a7 ce 0e 00 4c 89 74 24 20 e9 37 fe ff ff e8 98 ce 0e 00
RSP: 0018:ffff8881db209930 EFLAGS: 00010006
RAX: ffffffff86c2b200 RBX: 00000000ffffa688 RCX: ffffffff83efc583
RDX: 0000000000000100 RSI: ffffffff812f4d82 RDI: ffff8881d2356200
RBP: ffff8881d23561e8 R08: ffffffff86c2b200 R09: ffffed103a46abeb
R10: ffffed103a46abea R11: ffff8881d2355f53 R12: dffffc0000000000
R13: 1ffff1103b64132d R14: ffff8881d2355f50 R15: 0000000000000006
FS:  0000000000000000(0000) GS:ffff8881db200000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f75e2799000 CR3: 00000001d3b07000 CR4: 00000000001406f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 <IRQ>
 imon_touch_event drivers/media/rc/imon.c:1348 [inline]
 imon_incoming_packet.isra.0+0x2546/0x2f10 drivers/media/rc/imon.c:1603
 usb_rx_callback_intf0+0x151/0x1e0 drivers/media/rc/imon.c:1734
 __usb_hcd_giveback_urb+0x1f2/0x470 drivers/usb/core/hcd.c:1654
 usb_hcd_giveback_urb+0x368/0x420 drivers/usb/core/hcd.c:1719
 dummy_timer+0x120f/0x2fa2 drivers/usb/gadget/udc/dummy_hcd.c:1965
 call_timer_fn+0x179/0x650 kernel/time/timer.c:1404
 expire_timers kernel/time/timer.c:1449 [inline]
 __run_timers kernel/time/timer.c:1773 [inline]
 __run_timers kernel/time/timer.c:1740 [inline]
 run_timer_softirq+0x5e3/0x1490 kernel/time/timer.c:1786
 __do_softirq+0x221/0x912 kernel/softirq.c:292
 invoke_softirq kernel/softirq.c:373 [inline]
 irq_exit+0x178/0x1a0 kernel/softirq.c:413
 exiting_irq arch/x86/include/asm/apic.h:536 [inline]
 smp_apic_timer_interrupt+0x12f/0x500 arch/x86/kernel/apic/apic.c:1137
 apic_timer_interrupt+0xf/0x20 arch/x86/entry/entry_64.S:830
 </IRQ>
RIP: 0010:default_idle+0x28/0x2e0 arch/x86/kernel/process.c:581
Code: 90 90 41 56 41 55 65 44 8b 2d 44 3a 8f 7a 41 54 55 53 0f 1f 44 00 00 e8 36 ee d0 fb e9 07 00 00 00 0f 00 2d fa dd 4f 00 fb f4 <65> 44 8b 2d 20 3a 8f 7a 0f 1f 44 00 00 5b 5d 41 5c 41 5d 41 5e c3
RSP: 0018:ffffffff86c07da8 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff13
RAX: 0000000000000007 RBX: ffffffff86c2b200 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000006 RDI: ffffffff86c2ba4c
RBP: fffffbfff0d85640 R08: ffffffff86c2b200 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
 cpuidle_idle_call kernel/sched/idle.c:154 [inline]
 do_idle+0x3b6/0x500 kernel/sched/idle.c:263
 cpu_startup_entry+0x14/0x20 kernel/sched/idle.c:355
 start_kernel+0x82a/0x864 init/main.c:784
 secondary_startup_64+0xa4/0xb0 arch/x86/kernel/head_64.S:241
Modules linked in:

Reported-by: syzbot+f49d12d34f2321cf4df2@syzkaller.appspotmail.com
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: cxusb: detect cxusb_ctrl_msg error in query

commit ca8f245f284eeffa56f3b7a5eb6fc503159ee028 upstream.

Don't use uninitialized ircode[] in cxusb_rc_query() when
cxusb_ctrl_msg() fails to populate its contents.

syzbot reported:

dvb-usb: bulk message failed: -22 (1/-30591)
=====================================================
BUG: KMSAN: uninit-value in ir_lookup_by_scancode drivers/media/rc/rc-main.c:494 [inline]
BUG: KMSAN: uninit-value in rc_g_keycode_from_table drivers/media/rc/rc-main.c:582 [inline]
BUG: KMSAN: uninit-value in rc_keydown+0x1a6/0x6f0 drivers/media/rc/rc-main.c:816
CPU: 1 PID: 11436 Comm: kworker/1:2 Not tainted 5.3.0-rc7+ #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Workqueue: events dvb_usb_read_remote_control
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x191/0x1f0 lib/dump_stack.c:113
 kmsan_report+0x13a/0x2b0 mm/kmsan/kmsan_report.c:108
 __msan_warning+0x73/0xe0 mm/kmsan/kmsan_instr.c:250
 bsearch+0x1dd/0x250 lib/bsearch.c:41
 ir_lookup_by_scancode drivers/media/rc/rc-main.c:494 [inline]
 rc_g_keycode_from_table drivers/media/rc/rc-main.c:582 [inline]
 rc_keydown+0x1a6/0x6f0 drivers/media/rc/rc-main.c:816
 cxusb_rc_query+0x2e1/0x360 drivers/media/usb/dvb-usb/cxusb.c:548
 dvb_usb_read_remote_control+0xf9/0x290 drivers/media/usb/dvb-usb/dvb-usb-remote.c:261
 process_one_work+0x1572/0x1ef0 kernel/workqueue.c:2269
 worker_thread+0x111b/0x2460 kernel/workqueue.c:2415
 kthread+0x4b5/0x4f0 kernel/kthread.c:256
 ret_from_fork+0x35/0x40 arch/x86/entry/entry_64.S:355

Uninit was stored to memory at:
 kmsan_save_stack_with_flags mm/kmsan/kmsan.c:150 [inline]
 kmsan_internal_chain_origin+0xd2/0x170 mm/kmsan/kmsan.c:314
 __msan_chain_origin+0x6b/0xe0 mm/kmsan/kmsan_instr.c:184
 rc_g_keycode_from_table drivers/media/rc/rc-main.c:583 [inline]
 rc_keydown+0x2c4/0x6f0 drivers/media/rc/rc-main.c:816
 cxusb_rc_query+0x2e1/0x360 drivers/media/usb/dvb-usb/cxusb.c:548
 dvb_usb_read_remote_control+0xf9/0x290 drivers/media/usb/dvb-usb/dvb-usb-remote.c:261
 process_one_work+0x1572/0x1ef0 kernel/workqueue.c:2269
 worker_thread+0x111b/0x2460 kernel/workqueue.c:2415
 kthread+0x4b5/0x4f0 kernel/kthread.c:256
 ret_from_fork+0x35/0x40 arch/x86/entry/entry_64.S:355

Local variable description: ----ircode@cxusb_rc_query
Variable was created at:
 cxusb_rc_query+0x4d/0x360 drivers/media/usb/dvb-usb/cxusb.c:543
 dvb_usb_read_remote_control+0xf9/0x290 drivers/media/usb/dvb-usb/dvb-usb-remote.c:261

Signed-off-by: Vito Caputo <vcaputo@pengaru.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: b2c2-flexcop-usb: add sanity checking

commit 1b976fc6d684e3282914cdbe7a8d68fdce19095c upstream.

The driver needs an isochronous endpoint to be present. It will
oops in its absence. Add checking for it.

Reported-by: syzbot+d93dff37e6a89431c158@syzkaller.appspotmail.com
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: uvcvideo: Fix error path in control parsing failure

commit 8c279e9394cade640ed86ec6c6645a0e7df5e0b6 upstream.

When parsing the UVC control descriptors fails, the error path tries to
cleanup a media device that hasn't been initialised, potentially
resulting in a crash. Fix this by initialising the media device before
the error handling path can be reached.

Fixes: 5a254d751e52 ("[media] uvcvideo: Register a v4l2_device")
Reported-by: syzbot+c86454eb3af9e8a4da20@syzkaller.appspotmail.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cpufreq: Add NULL checks to show() and store() methods of cpufreq

commit e6e8df07268c1f75dd9215536e2ce4587b70f977 upstream.

Add NULL checks to show() and store() in cpufreq.c to avoid attempts
to invoke a NULL callback.

Though some interfaces of cpufreq are set as read-only, users can
still get write permission using chmod which can lead to a kernel
crash, as follows:

chmod +w /sys/devices/system/cpu/cpu0/cpufreq/scaling_cur_freq
echo 1 >  /sys/devices/system/cpu/cpu0/cpufreq/scaling_cur_freq

This bug was found in linux 4.19.

Signed-off-by: Kai Shen <shenkai8@huawei.com>
Reported-by: Feilong Lin <linfeilong@huawei.com>
Reviewed-by: Feilong Lin <linfeilong@huawei.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
[ rjw: Subject & changelog ]
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: usbvision: Fix races among open, close, and disconnect

commit 9e08117c9d4efc1e1bc6fce83dab856d9fd284b6 upstream.

Visual inspection of the usbvision driver shows that it suffers from
three races between its open, close, and disconnect handlers.  In
particular, the driver is careful to update its usbvision->user and
usbvision->remove_pending flags while holding the private mutex, but:

usbvision_v4l2_close() and usbvision_radio_close() don't hold
the mutex while they check the value of
usbvision->remove_pending;

usbvision_disconnect() doesn't hold the mutex while checking
the value of usbvision->user; and

also, usbvision_v4l2_open() and usbvision_radio_open() don't
check whether the device has been unplugged before allowing
the user to open the device files.

Each of these can potentially lead to usbvision_release() being called
twice and use-after-free errors.

This patch fixes the races by reading the flags while the mutex is
still held and checking for pending removes before allowing an open to
succeed.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
CC: <stable@vger.kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: vivid: Fix wrong locking that causes race conditions on streaming stop

commit 6dcd5d7a7a29c1e4b8016a06aed78cd650cd8c27 upstream.

There is the same incorrect approach to locking implemented in
vivid_stop_generating_vid_cap(), vivid_stop_generating_vid_out() and
sdr_cap_stop_streaming().

These functions are called during streaming stopping with vivid_dev.mutex
locked. And they all do the same mistake while stopping their kthreads,
which need to lock this mutex as well. See the example from
vivid_stop_generating_vid_cap():
  /* shutdown control thread */
  vivid_grab_controls(dev, false);
  mutex_unlock(&dev->mutex);
  kthread_stop(dev->kthread_vid_cap);
  dev->kthread_vid_cap = NULL;
  mutex_lock(&dev->mutex);

But when this mutex is unlocked, another vb2_fop_read() can lock it
instead of vivid_thread_vid_cap() and manipulate the buffer queue.
That causes a use-after-free access later.

To fix those issues let's:
  1. avoid unlocking the mutex in vivid_stop_generating_vid_cap(),
vivid_stop_generating_vid_out() and sdr_cap_stop_streaming();
  2. use mutex_trylock() with schedule_timeout_uninterruptible() in
the loops of the vivid kthread handlers.

Signed-off-by: Alexander Popov <alex.popov@linux.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Tested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: <stable@vger.kernel.org> # for v3.18 and up
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: vivid: Set vid_cap_streaming and vid_out_streaming to true

commit b4add02d2236fd5f568db141cfd8eb4290972eb3 upstream.

When vbi stream is started, followed by video streaming,
the vid_cap_streaming and vid_out_streaming were not being set to true,
which would cause the video stream to stop when vbi stream is stopped.
This patch allows to set vid_cap_streaming and vid_out_streaming to true.
According to Hans Verkuil it appears that these 'if (dev->kthread_vid_cap)'
checks are a left-over from the original vivid development and should never
have been there.

Signed-off-by: Vandana BN <bnvandana@gmail.com>
Cc: <stable@vger.kernel.org> # for v3.18 and up
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nfc: port100: handle command failure cleanly

commit 5f9f0b11f0816b35867f2cf71e54d95f53f03902 upstream.

If starting the transfer of a command suceeds but the transfer for the reply
fails, it is not enough to initiate killing the transfer for the
command may still be running. You need to wait for the killing to finish
before you can reuse URB and buffer.

Reported-and-tested-by: syzbot+711468aa5c3a1eabf863@syzkaller.appspotmail.com
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: usb-audio: Fix NULL dereference at parsing BADD

commit 9435f2bb66874a0c4dd25e7c978957a7ca2c93b1 upstream.

snd_usb_mixer_controls_badd() that parses UAC3 BADD profiles misses a
NULL check for the given interfaces.  When a malformed USB descriptor
is passed, this may lead to an Oops, as spotted by syzkaller.
Skip the iteration if the interface doesn't exist for avoiding the
crash.

Fixes: 17156f23e93c ("ALSA: usb: add UAC3 BADD profiles support")
Reported-by: syzbot+a36ab65c6653d7ccdd62@syzkaller.appspotmail.com
Suggested-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191122112840.24797-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

futex: Prevent robust futex exit race

commit ca16d5bee59807bf04deaab0a8eccecd5061528c upstream.

Robust futexes utilize the robust_list mechanism to allow the kernel to
release futexes which are held when a task exits. The exit can be voluntary
or caused by a signal or fault. This prevents that waiters block forever.

The futex operations in user space store a pointer to the futex they are
either locking or unlocking in the op_pending member of the per task robust
list.

After a lock operation has succeeded the futex is queued in the robust list
linked list and the op_pending pointer is cleared.

After an unlock operation has succeeded the futex is removed from the
robust list linked list and the op_pending pointer is cleared.

The robust list exit code checks for the pending operation and any futex
which is queued in the linked list. It carefully checks whether the futex
value is the TID of the exiting task. If so, it sets the OWNER_DIED bit and
tries to wake up a potential waiter.

This is race free for the lock operation but unlock has two race scenarios
where waiters might not be woken up. These issues can be observed with
regular robust pthread mutexes. PI aware pthread mutexes are not affected.

(1) Unlocking task is killed after unlocking the futex value in user space
    before being able to wake a waiter.

        pthread_mutex_unlock()
                |
                V
        atomic_exchange_rel (&mutex->__data.__lock, 0)
                        <------------------------killed
            lll_futex_wake ()                   |
                                                |
                                                |(__lock = 0)
                                                |(enter kernel)
                                                |
                                                V
                                            do_exit()
                                            exit_mm()
                                          mm_release()
                                        exit_robust_list()
                                        handle_futex_death()
                                                |
                                                |(__lock = 0)
                                                |(uval = 0)
                                                |
                                                V
        if ((uval & FUTEX_TID_MASK) != task_pid_vnr(curr))
                return 0;

    The sanity check which ensures that the user space futex is owned by
    the exiting task prevents the wakeup of waiters which in consequence
    block infinitely.

(2) Waiting task is killed after a wakeup and before it can acquire the
    futex in user space.

        OWNER                         WAITER
futex_wait()
   pthread_mutex_unlock()               |
                |                       |
                |(__lock = 0)           |
                |                       |
                V                       |
         futex_wake() ------------>  wakeup()
                                        |
                                        |(return to userspace)
                                        |(__lock = 0)
                                        |
                                        V
                        oldval = mutex->__data.__lock
                                          <-----------------killed
    atomic_compare_and_exchange_val_acq (&mutex->__data.__lock,  |
                        id | assume_other_futex_waiters, 0)      |
                                                                 |
                                                                 |
                                                   (enter kernel)|
                                                                 |
                                                                 V
                                                         do_exit()
                                                        |
                                                        |
                                                        V
                                        handle_futex_death()
                                        |
                                        |(__lock = 0)
                                        |(uval = 0)
                                        |
                                        V
        if ((uval & FUTEX_TID_MASK) != task_pid_vnr(curr))
                return 0;

    The sanity check which ensures that the user space futex is owned
    by the exiting task prevents the wakeup of waiters, which seems to
    be correct as the exiting task does not own the futex value, but
    the consequence is that other waiters wont be woken up and block
    infinitely.

In both scenarios the following conditions are true:

   - task->robust_list->list_op_pending != NULL
   - user space futex value == 0
   - Regular futex (not PI)

If these conditions are met then it is reasonably safe to wake up a
potential waiter in order to prevent the above problems.

As this might be a false positive it can cause spurious wakeups, but the
waiter side has to handle other types of unrelated wakeups, e.g. signals
gracefully anyway. So such a spurious wakeup will not affect the
correctness of these operations.

This workaround must not touch the user space futex value and cannot set
the OWNER_DIED bit because the lock value is 0, i.e. uncontended. Setting
OWNER_DIED in this case would result in inconsistent state and subsequently
in malfunction of the owner died handling in user space.

The rest of the user space state is still consistent as no other task can
observe the list_op_pending entry in the exiting tasks robust list.

The eventually woken up waiter will observe the uncontended lock value and
take it over.

[ tglx: Massaged changelog and comment. Made the return explicit and not
   depend on the subsequent check and added constants to hand into
   handle_futex_death() instead of plain numbers. Fixed a few coding
style issues. ]

Fixes: 0771dfefc9e5 ("[PATCH] lightweight robust futexes: core")
Signed-off-by: Yang Tao <yang.tao172@zte.com.cn>
Signed-off-by: Yi Wang <wang.yi59@zte.com.cn>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/1573010582-35297-1-git-send-email-wang.yi59@zte.com.cn
Link: https://lkml.kernel.org/r/20191106224555.943191378@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

y2038: futex: Move compat implementation into futex.c

commit 04e7712f4460585e5eed5b853fd8b82a9943958f upstream.

We are going to share the compat_sys_futex() handler between 64-bit
architectures and 32-bit architectures that need to deal with both 32-bit
and 64-bit time_t, and this is easier if both entry points are in the
same file.

In fact, most other system call handlers do the same thing these days, so
let's follow the trend here and merge all of futex_compat.c into futex.c.

In the process, a few minor changes have to be done to make sure everything
still makes sense: handle_futex_death() and futex_cmpxchg_enabled() become
local symbol, and the compat version of the fetch_robust_entry() function
gets renamed to compat_fetch_robust_entry() to avoid a symbol clash.

This is intended as a purely cosmetic patch, no behavior should
change.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nbd: prevent memory leak

commit 03bf73c315edca28f47451913177e14cd040a216 upstream.

In nbd_add_socket when krealloc succeeds, if nsock's allocation fail the
reallocted memory is leak. The correct behaviour should be assigning the
reallocted memory to config->socks right after success.

Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/speculation: Fix redundant MDS mitigation message

commit cd5a2aa89e847bdda7b62029d94e95488d73f6b2 upstream.

Since MDS and TAA mitigations are inter-related for processors that are
affected by both vulnerabilities, the followiing confusing messages can
be printed in the kernel log:

  MDS: Vulnerable
  MDS: Mitigation: Clear CPU buffers

To avoid the first incorrect message, defer the printing of MDS
mitigation after the TAA mitigation selection has been done. However,
that has the side effect of printing TAA mitigation first before MDS
mitigation.

 [ bp: Check box is affected/mitigations are disabled first before
   printing and massage. ]

Suggested-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Mark Gross <mgross@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Tyler Hicks <tyhicks@canonical.com>
Cc: x86-ml <x86@kernel.org>
Link: https://lkml.kernel.org/r/20191115161445.30809-3-longman@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/speculation: Fix incorrect MDS/TAA mitigation status

commit 64870ed1b12e235cfca3f6c6da75b542c973ff78 upstream.

For MDS vulnerable processors with TSX support, enabling either MDS or
TAA mitigations will enable the use of VERW to flush internal processor
buffers at the right code path. IOW, they are either both mitigated
or both not. However, if the command line options are inconsistent,
the vulnerabilites sysfs files may not report the mitigation status
correctly.

For example, with only the "mds=off" option:

  vulnerabilities/mds:Vulnerable; SMT vulnerable
  vulnerabilities/tsx_async_abort:Mitigation: Clear CPU buffers; SMT vulnerable

The mds vulnerabilities file has wrong status in this case. Similarly,
the taa vulnerability file will be wrong with mds mitigation on, but
taa off.

Change taa_select_mitigation() to sync up the two mitigation status
and have them turned off if both "mds=off" and "tsx_async_abort=off"
are present.

Update documentation to emphasize the fact that both "mds=off" and
"tsx_async_abort=off" have to be specified together for processors that
are affected by both TAA and MDS to be effective.

 [ bp: Massage and add kernel-parameters.txt change too. ]

Fixes: 1b42f017415b ("x86/speculation/taa: Add mitigation for TSX Async Abort")
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: linux-doc@vger.kernel.org
Cc: Mark Gross <mgross@linux.intel.com>
Cc: <stable@vger.kernel.org>
Cc: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Tyler Hicks <tyhicks@canonical.com>
Cc: x86-ml <x86@kernel.org>
Link: https://lkml.kernel.org/r/20191115161445.30809-2-longman@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/insn: Fix awk regexp warnings

commit 700c1018b86d0d4b3f1f2d459708c0cdf42b521d upstream.

gawk 5.0.1 generates the following regexp warnings:

  GEN      /home/sasha/torvalds/tools/objtool/arch/x86/lib/inat-tables.c
  awk: ../arch/x86/tools/gen-insn-attr-x86.awk:260: warning: regexp escape sequence `\:' is not a known regexp operator
  awk: ../arch/x86/tools/gen-insn-attr-x86.awk:350: (FILENAME=../arch/x86/lib/x86-opcode-map.txt FNR=41) warning: regexp escape sequence `\&' is  not a known regexp operator

Ealier versions of gawk are not known to generate these warnings. The
gawk manual referenced below does not list characters ':' and '&' as
needing escaping, so 'unescape' them. See

  https://www.gnu.org/software/gawk/manual/html_node/Escape-Sequences.html

for more info.

Running diff on the output generated by the script before and after
applying the patch reported no differences.

 [ bp: Massage commit message. ]

[ Caught the respective tools header discrepancy. ]
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Alexander Kapshuk <alexander.kapshuk@gmail.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: "Peter Zijlstra (Intel)" <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86-ml <x86@kernel.org>
Link: https://lkml.kernel.org/r/20190924044659.3785-1-alexander.kapshuk@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARC: perf: Accommodate big-endian CPU

commit 5effc09c4907901f0e71e68e5f2e14211d9a203f upstream.

8-letter strings representing ARC perf events are stores in two
32-bit registers as ASCII characters like that: "IJMP", "IALL", "IJMPTAK" etc.

And the same order of bytes in the word is used regardless CPU endianness.

Which means in case of big-endian CPU core we need to swap bytes to get
the same order as if it was on little-endian CPU.

Otherwise we're seeing the following error message on boot:
------------------------->8----------------------
ARC perf        : 8 counters (32 bits), 40 conditions, [overflow IRQ support]
sysfs: cannot create duplicate filename '/devices/arc_pct/events/pmji'
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.2.18 #3
Stack Trace:
  arc_unwind_core+0xd4/0xfc
  dump_stack+0x64/0x80
  sysfs_warn_dup+0x46/0x58
  sysfs_add_file_mode_ns+0xb2/0x168
  create_files+0x70/0x2a0
------------[ cut here ]------------
WARNING: CPU: 0 PID: 1 at kernel/events/core.c:12144 perf_event_sysfs_init+0x70/0xa0
Failed to register pmu: arc_pct, reason -17
Modules linked in:
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.2.18 #3
Stack Trace:
  arc_unwind_core+0xd4/0xfc
  dump_stack+0x64/0x80
  __warn+0x9c/0xd4
  warn_slowpath_fmt+0x22/0x2c
  perf_event_sysfs_init+0x70/0xa0
---[ end trace a75fb9a9837bd1ec ]---
------------------------->8----------------------

What happens here we're trying to register more than one raw perf event
with the same name "PMJI". Why? Because ARC perf events are 4 to 8 letters
and encoded into two 32-bit words. In this particular case we deal with 2
events:
 * "IJMP____" which counts all jump & branch instructions
 * "IJMPC___" which counts only conditional jumps & branches

Those strings are split in two 32-bit words this way "IJMP" + "____" &
"IJMP" + "C___" correspondingly. Now if we read them swapped due to CPU core
being big-endian then we read "PMJI" + "____" & "PMJI" + "___C".

And since we interpret read array of ASCII letters as a null-terminated string
on big-endian CPU we end up with 2 events of the same name "PMJI".

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: stable@vger.kernel.org
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: 8904/1: skip nomap memblocks while finding the lowmem/highmem boundary

commit 1d31999cf04c21709f72ceb17e65b54a401330da upstream.

adjust_lowmem_bounds() checks every memblocks in order to find the boundary
between lowmem and highmem. However some memblocks could be marked as NOMAP
so they are not used by kernel, which should be skipped while calculating
the boundary.

Signed-off-by: Chester Lin <clin@suse.com>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ocfs2: remove ocfs2_is_o2cb_active()

commit a634644751c46238df58bbfe992e30c1668388db upstream.

Remove ocfs2_is_o2cb_active().  We have similar functions to identify
which cluster stack is being used via osb->osb_cluster_stack.

Secondly, the current implementation of ocfs2_is_o2cb_active() is not
totally safe.  Based on the design of stackglue, we need to get
ocfs2_stack_lock before using ocfs2_stack related data structures, and
that active_stack pointer can be NULL in the case of mount failure.

Link: http://lkml.kernel.org/r/1495441079-11708-1-git-send-email-ghe@suse.com
Signed-off-by: Gang He <ghe@suse.com>
Reviewed-by: Joseph Qi <jiangqi903@gmail.com>
Reviewed-by: Eric Ren <zren@suse.com>
Acked-by: Changwei Ge <ge.changwei@h3c.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: phy: dp83867: increase SGMII autoneg timer duration

commit 1a97a477e666cbdededab93bd3754e508f0c09d7 upstream.

After reset SGMII Autoneg timer is set to 2us (bits 6 and 5 are 01).
That is not enough to finalize autonegatiation on some devices.
Increase this timer duration to maximum supported 16ms.

Signed-off-by: Max Uvarov <muvarov@gmail.com>
Cc: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
[ adapted for kernels without phy_modify_mmd ]
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: phy: dp83867: fix speed 10 in sgmii mode

commit 333061b924539c0de081339643f45514f5f1c1e6 upstream.

For supporting 10Mps speed in SGMII mode DP83867_10M_SGMII_RATE_ADAPT bit
of DP83867_10M_SGMII_CFG register has to be cleared by software.
That does not affect speeds 100 and 1000 so can be done on init.

Signed-off-by: Max Uvarov <muvarov@gmail.com>
Cc: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
[ adapted for kernels without phy_modify_mmd ]
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm/memory_hotplug: don't access uninitialized memmaps in shrink_zone_span()

commit 7ce700bf11b5e2cb84e4352bbdf2123a7a239c84 upstream.

Let's limit shrinking to !ZONE_DEVICE so we can fix the current code.
We should never try to touch the memmap of offline sections where we
could have uninitialized memmaps and could trigger BUGs when calling
page_to_nid() on poisoned pages.

There is no reliable way to distinguish an uninitialized memmap from an
initialized memmap that belongs to ZONE_DEVICE, as we don't have
anything like SECTION_IS_ONLINE we can use similar to
pfn_to_online_section() for !ZONE_DEVICE memory.

E.g., set_zone_contiguous() similarly relies on pfn_to_online_section()
and will therefore never set a ZONE_DEVICE zone consecutive.  Stopping
to shrink the ZONE_DEVICE therefore results in no observable changes,
besides /proc/zoneinfo indicating different boundaries - something we
can totally live with.

Before commit d0dc12e86b31 ("mm/memory_hotplug: optimize memory
hotplug"), the memmap was initialized with 0 and the node with the right
value.  So the zone might be wrong but not garbage.  After that commit,
both the zone and the node will be garbage when touching uninitialized
memmaps.

Toshiki reported a BUG (race between delayed initialization of
ZONE_DEVICE memmaps without holding the memory hotplug lock and
concurrent zone shrinking).

  https://lkml.org/lkml/2019/11/14/1040

"Iteration of create and destroy namespace causes the panic as below:

      kernel BUG at mm/page_alloc.c:535!
      CPU: 7 PID: 2766 Comm: ndctl Not tainted 5.4.0-rc4 #6
      Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.0-0-g63451fca13-prebuilt.qemu-project.org 04/01/2014
      RIP: 0010:set_pfnblock_flags_mask+0x95/0xf0
      Call Trace:
       memmap_init_zone_device+0x165/0x17c
       memremap_pages+0x4c1/0x540
       devm_memremap_pages+0x1d/0x60
       pmem_attach_disk+0x16b/0x600 [nd_pmem]
       nvdimm_bus_probe+0x69/0x1c0
       really_probe+0x1c2/0x3e0
       driver_probe_device+0xb4/0x100
       device_driver_attach+0x4f/0x60
       bind_store+0xc9/0x110
       kernfs_fop_write+0x116/0x190
       vfs_write+0xa5/0x1a0
       ksys_write+0x59/0xd0
       do_syscall_64+0x5b/0x180
       entry_SYSCALL_64_after_hwframe+0x44/0xa9

  While creating a namespace and initializing memmap, if you destroy the
  namespace and shrink the zone, it will initialize the memmap outside
  the zone and trigger VM_BUG_ON_PAGE(!zone_spans_pfn(page_zone(page),
  pfn), page) in set_pfnblock_flags_mask()."

This BUG is also mitigated by this commit, where we for now stop to
shrink the ZONE_DEVICE zone until we can do it in a safe and clean way.

Link: http://lkml.kernel.org/r/20191006085646.5768-5-david@redhat.com
Fixes: f1dd2cd13c4b ("mm, memory_hotplug: do not associate hotadded memory to zones until online") [visible after d0dc12e86b319]
Signed-off-by: David Hildenbrand <david@redhat.com>
Reported-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Reported-by: Toshiki Fukasawa <t-fukasawa@vx.jp.nec.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: David Hildenbrand <david@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Christophe Leroy <christophe.leroy@c-s.fr>
Cc: Damian Tometzki <damian.tometzki@gmail.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Halil Pasic <pasic@linux.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jun Yao <yaojun8558363@gmail.com>
Cc: Logan Gunthorpe <logang@deltatee.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Pankaj Gupta <pagupta@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pavel Tatashin <pavel.tatashin@microsoft.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qian Cai <cai@lca.pw>
Cc: Rich Felker <dalias@libc.org>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Steve Capper <steve.capper@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Wei Yang <richardw.yang@linux.intel.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Yu Zhao <yuzhao@google.com>
Cc: <stable@vger.kernel.org> [4.13+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

md/raid10: prevent access of uninitialized resync_pages offset

commit 45422b704db392a6d79d07ee3e3670b11048bd53 upstream.

Due to unneeded multiplication in the out_free_pages portion of
r10buf_pool_alloc(), when using a 3-copy raid10 layout, it is
possible to access a resync_pages offset that has not been
initialized.  This access translates into a crash of the system
within resync_free_pages() while passing a bad pointer to
put_page().  Remove the multiplication, preventing access to the
uninitialized area.

Fixes: f0250618361db ("md: raid10: don't use bio's vec table to manage resync pages")
Cc: stable@vger.kernel.org # 4.12+
Signed-off-by: John Pittman <jpittman@redhat.com>
Suggested-by: David Jeffery <djeffery@redhat.com>
Reviewed-by: Laurence Oberman <loberman@redhat.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ath9k_hw: fix uninitialized variable data

commit 80e84f36412e0c5172447b6947068dca0d04ee82 upstream.

Currently, data variable in ar9003_hw_thermo_cal_apply() could be
uninitialized if ar9300_otp_read_word() will fail to read the value.
Initialize data variable with 0 to prevent an undefined behavior. This
will be enough to handle error case when ar9300_otp_read_word() fails.

Fixes: 80fe43f2bbd5 ("ath9k_hw: Read and configure thermocal for AR9462")
Cc: Rajkumar Manoharan <rmanohar@qca.qualcomm.com>
Cc: John W. Linville <linville@tuxdriver.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: stable@vger.kernel.org
Signed-off-by: Denis Efremov <efremov@linux.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ath10k: Fix a NULL-ptr-deref bug in ath10k_usb_alloc_urb_from_pipe

commit bfd6e6e6c5d2ee43a3d9902b36e01fc7527ebb27 upstream.

The `ar_usb` field of `ath10k_usb_pipe_usb_pipe` objects
are initialized to point to the containing `ath10k_usb` object
according to endpoint descriptors read from the device side, as shown
below in `ath10k_usb_setup_pipe_resources`:

for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) {
        endpoint = &iface_desc->endpoint[i].desc;

        // get the address from endpoint descriptor
        pipe_num = ath10k_usb_get_logical_pipe_num(ar_usb,
                                                endpoint->bEndpointAddress,
                                                &urbcount);
        ......
        // select the pipe object
        pipe = &ar_usb->pipes[pipe_num];

        // initialize the ar_usb field
        pipe->ar_usb = ar_usb;
}

The driver assumes that the addresses reported in endpoint
descriptors from device side  to be complete. If a device is
malicious and does not report complete addresses, it may trigger
NULL-ptr-deref `ath10k_usb_alloc_urb_from_pipe` and
`ath10k_usb_free_urb_to_pipe`.

This patch fixes the bug by preventing potential NULL-ptr-deref.

Signed-off-by: Hui Peng <benquike@gmail.com>
Reported-by: Hui Peng <benquike@gmail.com>
Reported-by: Mathias Payer <mathias.payer@nebelwelt.net>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[groeck: Add driver tag to subject, fix build warning]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: MMU: Do not treat ZONE_DEVICE pages as being reserved

commit a78986aae9b2988f8493f9f65a587ee433e83bc3 upstream.

Explicitly exempt ZONE_DEVICE pages from kvm_is_reserved_pfn() and
instead manually handle ZONE_DEVICE on a case-by-case basis.  For things
like page refcounts, KVM needs to treat ZONE_DEVICE pages like normal
pages, e.g. put pages grabbed via gup().  But for flows such as setting
A/D bits or shifting refcounts for transparent huge pages, KVM needs to
to avoid processing ZONE_DEVICE pages as the flows in question lack the
underlying machinery for proper handling of ZONE_DEVICE pages.

This fixes a hang reported by Adam Borowski[*] in dev_pagemap_cleanup()
when running a KVM guest backed with /dev/dax memory, as KVM straight up
doesn't put any references to ZONE_DEVICE pages acquired by gup().

Note, Dan Williams proposed an alternative solution of doing put_page()
on ZONE_DEVICE pages immediately after gup() in order to simplify the
auditing needed to ensure is_zone_device_page() is called if and only if
the backing device is pinned (via gup()).  But that approach would break
kvm_vcpu_{un}map() as KVM requires the page to be pinned from map() 'til
unmap() when accessing guest memory, unlike KVM's secondary MMU, which
coordinates with mmu_notifier invalidations to avoid creating stale
page references, i.e. doesn't rely on pages being pinned.

[*] http://lkml.kernel.org/r/20190919115547.GA17963@angband.pl

Reported-by: Adam Borowski <kilobyte@angband.pl>
Analyzed-by: David Hildenbrand <david@redhat.com>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Cc: stable@vger.kernel.org
Fixes: 3565fce3a659 ("mm, x86: get_user_pages() for dax mappings")
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
[sean: backport to 4.x; resolve conflict in mmu.c]
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Bluetooth: Fix invalid-free in bcsp_close()

commit cf94da6f502d8caecabd56b194541c873c8a7a3c upstream.

Syzbot reported an invalid-free that I introduced fixing a memleak.

bcsp_recv() also frees bcsp->rx_skb but never nullifies its value.
Nullify bcsp->rx_skb every time it is freed.

Signed-off-by: Tomas Bortoli <tomasbortoli@gmail.com>
Reported-by: syzbot+a0d209a4676664613e76@syzkaller.appspotmail.com
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Cc: Alexander Potapenko <glider@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm/page_io.c: do not free shared swap slots

[ Upstream commit 5df373e95689b9519b8557da7c5bd0db0856d776 ]

The following race is observed due to which a processes faulting on a
swap entry, finds the page neither in swapcache nor swap.  This causes
zram to give a zero filled page that gets mapped to the process,
resulting in a user space crash later.

Consider parent and child processes Pa and Pb sharing the same swap slot
with swap_count 2.  Swap is on zram with SWP_SYNCHRONOUS_IO set.
Virtual address 'VA' of Pa and Pb points to the shared swap entry.

Pa                                       Pb

fault on VA                              fault on VA
do_swap_page                             do_swap_page
lookup_swap_cache fails                  lookup_swap_cache fails
                                         Pb scheduled out
swapin_readahead (deletes zram entry)
swap_free (makes swap_count 1)
                                         Pb scheduled in
                                         swap_readpage (swap_count == 1)
                                         Takes SWP_SYNCHRONOUS_IO path
                                         zram enrty absent
                                         zram gives a zero filled page

Fix this by making sure that swap slot is freed only when swap count
drops down to one.

Link: http://lkml.kernel.org/r/1571743294-14285-1-git-send-email-vinmenon@codeaurora.org
Fixes: aa8d22a11da9 ("mm: swap: SWP_SYNCHRONOUS_IO: skip swapcache only if swapped page has no other reference")
Signed-off-by: Vinayak Menon <vinmenon@codeaurora.org>
Suggested-by: Minchan Kim <minchan@google.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cfg80211: call disconnect_wk when AP stops

[ Upstream commit e005bd7ddea06784c1eb91ac5bb6b171a94f3b05 ]

Since we now prevent regulatory restore during STA disconnect
if concurrent AP interfaces are active, we need to reschedule
this check when the AP state changes. This fixes never doing
a restore when an AP is the last interface to stop. Or to put
it another way: we need to re-check after anything we check
here changes.

Cc: stable@vger.kernel.org
Fixes: 113f3aaa81bd ("cfg80211: Prevent regulatory restore during STA disconnect in concurrent interfaces")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>