lib: utils: Add M-mode {R/W} flags to the MMIO regions

Add the M-mode readable/writable flags to mmio regions
of various drivers.

Signed-off-by: Himanshu Chauhan <hchauhan@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Tested-by: Anup Patel <anup@brainfault.org>

lib: utils: Disallow non-root domains from adding M-mode regions

The M-mode regions can only be added to the root domain. The non-root
domains shouldn't be able to add them from FDT.

Signed-off-by: Himanshu Chauhan <hchauhan@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Tested-by: Anup Patel <anup@brainfault.org>

lib: utils: Use SU-{R/W/X} flags for region permissions during parsing

Use the newer SU-{R/W/X} flags for checking and assigning region
permissions.

Signed-off-by: Himanshu Chauhan <hchauhan@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Tested-by: Anup Patel <anup@brainfault.org>

lib: sbi: Modify the boot time region flag prints

With the finer permission semantics, the region access
permissions must be displayed separately for M and SU mode.

Signed-off-by: Himanshu Chauhan <hchauhan@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Tested-by: Anup Patel <anup@brainfault.org>

lib: sbi: Use finer permission sematics to decide on PMP bits

Use the fine grained permission bits to decide if the region
permissions are to be enforced on all modes. Also use the new
permission bits for deciding on R/W/X bits in pmpcfg register.

Signed-off-by: Himanshu Chauhan <hchauhan@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Tested-by: Anup Patel <anup@brainfault.org>

lib: sbi: Add permissions for the firmware start till end

Change the zero flag to M-mode R/W/X flag for the firmware
region.

Signed-off-by: Himanshu Chauhan <hchauhan@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Tested-by: Anup Patel <anup@brainfault.org>

lib: sbi: Use finer permission semantics for address validation

Use the fine grained permisssion semantics for address validation
of a given region.

Signed-off-by: Himanshu Chauhan <hchauhan@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Tested-by: Anup Patel <anup@brainfault.org>

include: sbi: Fine grain the permissions for M and SU modes

Split the permissions for M-mode and SU-mode. This would
help if different sections of OpenSBI need to be given
different permissions and if M-mode has different permisssions
than the SU-mode over a region.

Signed-off-by: Himanshu Chauhan <hchauhan@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Tested-by: Anup Patel <anup@brainfault.org>

docs: domain_support: Use capital letter for privilege modes

The RISC-V convention for the privilege mode is capital letter, like
'M-mode', instead of 'm-mode'.

Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

lib: sbi_hsm: Rename 'priv' argument to 'arg1'

'priv' argument of sbi_hsm_hart_start() and sbi_hsm_hart_suspend()
may mislead people to think it stands for 'privilege mode', but it
is not. Change it to 'arg1' to clearly indicate the a1 register.

Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Samuel Holland <samuel@sholland.org>
Tested-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

generic/starfive: Add Starfive JH7110 platform implementation

Add Starfive JH7110 platform implementation

Signed-off-by: Wei Liang Lim <weiliang.lim@starfivetech.com>
Reviewed-by: Chee Hong Ang <cheehong.ang@starfivetech.com>
Reviewed-by: Jun Liang Tan <junliang.tan@starfivetech.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

platform: generic: Allow platform_override to perform firmware init

We add a generic platform override callback to allow platform specific firmware init.

Signed-off-by: Wei Liang Lim <weiliang.lim@starfivetech.com>
Reviewed-by: Chee Hong Ang <cheehong.ang@starfivetech.com>
Reviewed-by: Jun Liang Tan <junliang.tan@starfivetech.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

platform: generic: Allow platform_override to select cold boot HART

We add a generic platform override callback to allow platform specific
selection of cold boot HART.

Signed-off-by: Anup Patel <apatel@ventanamicro.com>

lib: sbi: Allow platform to influence cold boot HART selection

We add an optional cold_boot_allowed() platform callback which allows
platform support to decide which HARTs can do cold boot initialization.

If this platform callback is not available then any HART can do cold
boot initialization.

Signed-off-by: Anup Patel <apatel@ventanamicro.com>

lib: utils/sys: Allow custom HTIF base address for RV32

commit 6dde43584f18 ("lib: utils/sys: Extend HTIF library to allow custom base address")
forgot to update do_tohost_fromhost() codes for RV32, which still
accesses the HTIF registers using the ELF symbol address directly.

Fixes: 6dde43584f18 ("lib: utils/sys: Extend HTIF library to allow custom base address")
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Tested-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

Makefile: Remove -N ldflag to prevent linker RWX warning

-N option coalesce all sections into single LOAD segment which causes
data and other sections to have executable permission causing warning
with new binutils ld 2.39.
New ld emits warning when any segment have all three permissions RWX.

ld.bfd: warning: test.elf has a LOAD segment with RWX permissions
ld.bfd: warning: fw_dynamic.elf has a LOAD segment with RWX permissions
ld.bfd: warning: fw_jump.elf has a LOAD segment with RWX permissions
ld.bfd: warning: fw_payload.elf has a LOAD segment with RWX permissions

This option was added in below commit -
commit: eeab92f2423e ("Makefile: Convert to a more standard format")

Removing -N option allows to have text and rodata into one LOAD
segment and other sections into separate LOAD segment which prevents
RWX permissions on single LOAD segment. Here X == E

Current
 LOAD           0x0000000000000120 0x0000000080000000 0x0000000080000000
                 0x000000000001d4d0 0x0000000000032ed8  RWE    0x10

-N removed
  LOAD           0x0000000000001000 0x0000000080000000 0x0000000080000000
                 0x00000000000198cc 0x00000000000198cc  R E    0x1000
  LOAD           0x000000000001b000 0x000000008001a000 0x000000008001a000
                 0x00000000000034d0 0x0000000000018ed8  RW     0x1000

Signed-off-by: Rahul Pathak <rpathak@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Tested-by: Samuel Holland <samuel@sholland.org>

treewide: Replace TRUE/FALSE with true/false

C language standard uses true/false for the boolean type.
Let's switch to that for better language compatibility.

Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Samuel Holland <samuel@sholland.org>
Tested-by: Samuel Holland <samuel@sholland.org>

include: Bump-up version to 1.2

This patch updates OpenSBI version to 1.2 as part of
release preparation.

Signed-off-by: Anup Patel <apatel@ventanamicro.com>

docs: pmu: Update the pmu doc with removal of mcountinhbit restriction

Since commit b28f070, it is possible for platforms to run perf monitoring
even if mcountinhibit is not supported. Sampling still won't be possible
though as it requires sscofpmf extension.

Update the docs to remove the restriction.

Signed-off-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

docs: pmu: update a reference to a deprecated property name

event-to-mhpmevent was deprecated and replaced by
riscv,event-to-mhpmevent, but a reference remains to the old name.
Replace it with the new one.

Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

docs: pmu: fix binding example

The first PMU binding example does not terminate properties with a ;,
which is invalid. Noticed while converting the binding to yaml.

Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Anup Patel <anup@brainfault.org>

lib: utils/timer: mtimer: add T-Head C9xx CLINT compatible

As we already added the quirk for lacking mtime register to MTIMER
driver, add T-Head C9xx CLINT compatible to it and wire the quirk.

Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
Reviewed-by: Anup Patel <anup@brainfault.org>

lib: utils/timer: mtimer: add a quirk for lacking mtime register

T-Head developers surely have a different understanding of time CSR and
CLINT's mtime register with SiFive ones, that they did not implement
the mtime register at all -- as shown in openC906 source code, their
time CSR value is just exposed at the top of their processor IP block
and expects an external continous counter, which makes it not
overrideable, and thus mtime register is not implemented, even not for
reading. However, if CLINTEE is not enabled in T-Head's MXSTATUS
extended CSR, these systems still rely on the mtimecmp registers to
generate timer interrupts. This makes it necessary to implement T-Head
C9xx CLINT support in OpenSBI MTIMER driver, which skips implementing
reading mtime register and falls back to default code that reads time
CSR.

Add a quirk into MTIMER driver, which represents a mtime register is
lacking and time CSR value should be used instead.

Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
Reviewed-by: Anup Patel <anup@brainfault.org>

lib: utils/ipi: mswi: add T-Head C9xx CLINT compatible

Althoug the MTIMER part of a C9xx CLINT differs from a SiFive one, the
MSWI part is compliant.

Add T-Head C9xx CLINT compatible string to fdt_ipi_mswi code, sharing
the same codepath with SiFive CLINT.

Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
Reviewed-by: Anup Patel <anup@brainfault.org>

lib: utils/irqchip: plic: Ensure no out-of-bound access in context save/restore helpers

Currently the context save/restore helpers writes/reads the provided
array using an index whose maximum value is determined by PLIC, which
potentially may disagree with the caller to these helpers.

Add a parameter to ask the caller to provide the size limit of the
array to ensure no out-of-bound access happens.

Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Anup Patel <anup@brainfault.org>

lib: utils/irqchip: plic: Fix the off-by-one error in context save/restore helpers

plic->num_src holds the number of interrupt sources without interrupt
source 0 but the interrupt enable register includes a bit for the
interrupt source 0 in the first word.

Fixes: 415ecf28f7ad ("lib: irqchip/plic: Add context save/restore helpers")
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Samuel Holland <samuel@sholland.org>

lib: utils/irqchip: plic: Fix the off-by-one error in plic_context_init()

The number of interrupt enable register in words was once correct,
but was wrongly changed to have an off-by-one error since
commit 8c362e7d065e ("lib: irqchip/plic: Factor out a context init function").

Fixes: 8c362e7d065e ("lib: irqchip/plic: Factor out a context init function")
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Samuel Holland <samuel@sholland.org>

lib: utils/irqchip: plic: Ensure no out-of-bound access in priority save/restore helpers

Currently the priority save/restore helpers writes/reads the provided
array using an index whose maximum value is determined by PLIC, which
potentially may disagree with the caller to these helpers.

Add a parameter to ask the caller to provide the size limit of the
array to ensure no out-of-bound access happens.

Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Anup Patel <anup@brainfault.org>

lib: utils/irqchip: plic: Fix the off-by-one error in priority save/restore helpers

Interrupt source 0 is reserved. Hence the irq should start from 1.

Fixes: 2b79b694a805 ("lib: irqchip/plic: Add priority save/restore helpers")
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Anup Patel <anup@brainfault.org>

docs: platform: Add documentation for Renesas RZ/Five SoC

This patch adds documentation to build Renesas RZ/Five (R9A07G043F) SoC.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

platform: generic: Add Renesas RZ/Five initial support

This commit provides basic support for the Renesas RZ/Five
(R9A07G043F) SoC.

The RZ/Five microprocessor includes a single RISC-V CPU Core (Andes AX45MP)
1.0 GHz, 16-bit DDR3L/DDR4 interface. Supported interfaces include:
- Gigabit Ethernet 2ch
- CAN interface (CAN-FD) 2ch
- USB 2.0 interface 2ch
- SD interface 2ch
- AD converter 2ch

Useful links:
-------------
Links: https://www.renesas.com/us/en/products/microcontrollers-microprocessors/rz-mpus/rzfive-risc-v-general-purpose-microprocessors-risc-v-cpu-core-andes-ax45mp-single-10-ghz-2ch-gigabit-ethernet
Links: http://www.andestech.com/en/products-solutions/andescore-processors/riscv-ax45mp/

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

lib: utils/irqchip: Add compatible string for Andestech NCEPLIC100

Add compatible string for Andestech NCEPLIC100 found on Renesas RZ/Five SoC
which is equipped with AX45MP AndesCore.

While at it drop the comma after the sentinel as it does not make sense to
have a comma after a sentinel, as any new elements must be added before the
sentinel.

dts example (Single-core AX45MP):

    soc: soc {
          ....
          plic: interrupt-controller@12c00000 {
              compatible = "renesas,r9a07g043-plic", "andestech,nceplic100";
              #interrupt-cells = <2>;
              #address-cells = <0>;
              riscv,ndev = <511>;
              interrupt-controller;
              reg = <0x0 0x12c00000 0 0x400000>;
              clocks = <&cpg CPG_MOD R9A07G043_NCEPLIC_ACLK>;
              power-domains = <&cpg>;
              resets = <&cpg R9A07G043_NCEPLIC_ARESETN>;
              interrupts-extended = <&cpu0_intc 11 &cpu0_intc 9>;
          };
          ....
    };

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Bin Meng <bmeng@tinylab.org>

lib: utils: serial: Add FDT driver for Renesas SCIF

Add FDT driver for Renesas SCIF.

    dts example:

    soc: soc {
          ....
            scif0: serial@1004b800 {
                    compatible = "renesas,scif-r9a07g043",
                                 "renesas,scif-r9a07g044";
                    reg = <0 0x1004b800 0 0x400>;
                    interrupts = <412 IRQ_TYPE_LEVEL_HIGH>,
                                 <414 IRQ_TYPE_LEVEL_HIGH>,
                                 <415 IRQ_TYPE_LEVEL_HIGH>,
                                 <413 IRQ_TYPE_LEVEL_HIGH>,
                                 <416 IRQ_TYPE_LEVEL_HIGH>,
                                 <416 IRQ_TYPE_LEVEL_HIGH>;
                    interrupt-names = "eri", "rxi", "txi",
                                      "bri", "dri", "tei";
                    clocks = <&cpg CPG_MOD R9A07G043_SCIF0_CLK_PCK>;
                    clock-names = "fck";
                    power-domains = <&cpg>;
                    resets = <&cpg R9A07G043_SCIF0_RST_SYSTEM_N>;
                    status = "disabled";
            };
          ....
    };

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

lib: utils: serial: Add Renesas SCIF driver

Add Renesas SCIF driver.

Based on a patch in the BSP by Takeki Hamada
<takeki.hamada.ak@bp.renesas.com>
Link: https://github.com/renesas-rz/rz_opensbi/commits/work/OpenSBI-PMA
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

scripts: use env to invoke bash

Not all systems have bash at a fixed location like /bin/bash.
FreeBSD, for example, would typically have it at /usr/local/bin/bash.
When building OpenSBI on freebsd system, the build breaks.

Its advisable to use: #!/usr/bin/env bash

Signed-off-by: Himanshu Chauhan <hchauhan@ventanamicro.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

lib: sbi: Synchronize PMP settings with virtual memory system

As per section 3.7.2 of RISC-V Privileged Specification,
PMP settings must be synchronized with the virtual memory
system after PMP settings have been written.

Signed-off-by: Himanshu Chauhan <hchauhan@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

lib: fix irqchip_plic_update_hartid_table

After determining cpu_offset we have to check this value.

Addresses-Coverity-ID: 1529706 ("Logically dead code")
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

lib: fix __fdt_parse_region()

If fdt_getprop() returns NULL, this indicates an error. In this case lenp
is set to an error code. But even if lenp = 0 we should not continue.

If fdt_getprop() returns a wider value than we expect this is a separate
error condition.

In both cases the device-tree is invalid.

Addresses-Coverity-ID: 1529703 ("Dereference after null check")
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

lib: fix is_region_valid()

For 'reg->order == __riscv_xlen' the term 'BIT(reg->order)' is undefined.

Addresses-Coverity-ID: 1529706 ("Bad bit shift operation")
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

platform: generic: Make use of fdt_match_node()

It makes sense to use fdt_match_node() instead of fdt_find_match()
in fw_platform_lookup_special() as we already have the start offset
to search from.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

gitignore: add vim swap files

Update .gitignore for vim swap files.

Signed-off-by: Sergey Matyukevich <sergey.matyukevich@syntacore.com>
Reviewed-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

lib: utils: Add fdt_fixup_node() helper function

Add a helper function fdt_fixup_node() based on the compatible string.
This will avoid code duplication for every new node fixup being added.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

scripts/create-binary-archive.sh: remove andes/ae350 build directory

The andes-specific files have been moved to generic platform so we
can drop this line.

Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Anup Patel <anup@brainfault.org>

docs: andes-ae350.md: fix watchdog nodename in dts example

The example should use watchdog as nodename instead of wdt.
This is defined in watchdog common schemas:
https://github.com/torvalds/linux/blob/v6.0/Documentation/devicetree/bindings/watchdog/watchdog.yaml#L19

Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Anup Patel <anup@brainfault.org>

docs: platform: Update AE350 and generic platform documentation

Update compile option and platform compatible string for AE350 and
add it to the generic platform list.

Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Anup Patel <anup@brainfault.org>

platform: generic/andes: Enable generic platform support for AE350

We move andes directory to platform/generic as the necessary fdt
drivers are available, the users can enable the console, timer, ipi,
irqchip and reset devices by adding device tree nodes stated in the
docs/platform/andes-ae350.md.

Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Anup Patel <anup@brainfault.org>

firmware: Minor optimization for relocate

The t3 register stores the address of _load_end. If relocation is not
required, it is unnecessary to calculate the address of _load_end.

This can reduce the operation time of two instructions.

Signed-off-by: Dongdong Zhang <zhangdongdong@eswincomputing.com>
Reviewed-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Anup Patel <anup@brainfault.org>

lib: fix fdt_parse_aclint_node()

After determining cpu_offset we have to check this variable and not
cpu_intc_offset.

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Bin Meng <bmeng@tinylab.org>

lib: simplify fdt_translate_address()

Don't assign a value to offset which is never used.

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Bin Meng <bmeng@tinylab.org>

lib: fix fdt_parse_plicsw_node()

cpu_offset and cpu_intc_offset must be int to detect failed invocations of
fdt_node_offset_by_phandle() or fdt_parent_offset().

After determining cpu_offset we have to check this value and not
cpu_intc_offset.

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Bin Meng <bmeng@tinylab.org>

lib: fix fdt_parse_plmt_node()

cpu_offset, cpu_intc_offset must be int to discover failed invocations of
fdt_node_offset_by_phandle() or fdt_parent_offset().

After determining cpu_offset we have to check this value and not
cpu_intc_offset.

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Bin Meng <bmeng@tinylab.org>

lib: simplify fdt_parse_plicsw_node()

We should not check !plicsw_base || !size twice.

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Bin Meng <bmeng@tinylab.org>

lib: simplify fdt_parse_plmt_node()

We should not check !plmt_base || !plmt_size twice.

Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Bin Meng <bmeng@tinylab.org>

lib: sbi: Fix is_region_valid()

When order is equal to __riscv_xlen, the shift operation will not perform
any operation, which will cause reg->base & (BIT(reg->order) - 1) to always
be 0, and the condition has not been established.

This patch fixes this bug.

Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

lib: sbi: Simplified mmio match checking

We simplify the mmio flag matching in sbi_domain_check_addr().

Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

Makefile: bugfix for handling platform paths

If the path where this repo is located contains the platform name on
it, the original Makefile replaced its occurrences from the path making
it an invalid path. This commit prevents this behavior replacing only
the last part of the path as intended.

Signed-off-by: Alejandro Cabrera Aldaya <aldaya@gmail.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

Makefile: replace `echo` with `printf` for compatibility

I don't know why but `echo -n` didn't work for me. macOS supports
the `-n` option but it doesn't work in the makefile. What it does
instead is it literally writes `-n` to the file and then also
leaves a newline at the end.

I'm using GNU Make 4.4 (`gmake` from Homebrew).

Signed-off-by: KaDiWa <kalle.wachsmuth@gmail.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

platform: generic/allwinner: Remove ghostly type cast

Corrected the same parameter of writel_relaxed in sun20i_d1_riscv_cfg_init
to be u32 for a while and u64 for a while.

Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

platform: generic/allwinner: Remove unused header files

Remove "#include <sbi/sbi_console.h>"

Signed-off-by: Leizheng Zhang <zhangleizheng@eswincomputing.com>
Reviewed-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Xiang W <wxjstz@126.com>

firmware: payloads: Optimize usage of "ALIGN"

Delete the redundant "ALIGN" and adjust the position of "ALIGN"

Signed-off-by: Leizheng Zhang <zhangleizheng@eswincomputing.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Bin Meng <bmeng@tinylab.org>

lib: sbi_ecall: Split up sbi_ecall_replace

Split up sbi_ecall_replace so that each extension is in its individual
file.

Also reorganize the corresponding section in lib/sbi/objects.mk so
that it is grouped by extension, now that the object file targets are
split up.

Signed-off-by: Vivian Wang <dramforever@live.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

lib: utils/serial: Fix semihosting compile error using LLVM

We fix the following semihosting compile error observed using LLVM:
lib/utils/serial/semihosting.c:158:12: error: result of comparison of constant -1 with expression of type 'char' is always true [-Werror,-Wtautological-constant-out-of-range-compare]
                ret = ch > -1 ? ch : -1;
                      ~~ ^ ~~

Fixes: 7f09fba86e43 ("lib: utils/serial: add semihosting support")
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Bin Meng <bmeng@tinylab.org>

docs: fix some typos

Corrected the typos of some documents in the 'docs' folder.

Signed-off-by: zhangdongdong <zhangdongdong@eswincomputing.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

lib: utils/fdt: Simplified code

Simplified fdt_parse_xxx_uart_node which direct call
fdt_parse_uart_node_common.

Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

lib: utils/fdt: Remove redundant code

uart->reg_offset and uart->reg_io_width are only used on uart8250 and
not required on other platforms. Remove for sifive and gaisler.

Signed-off-by: Xiang W <wxjstz@126.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

lib: sbi_ecall: Add Kconfig option for each extension

For each SBI extension, we:

- Add a Kconfig option for it
- Add the extension to sbi_ecall_exts only if the extension is enabled
- Add the corresponding sbi_ecall_* object file only if the extension is
  enabled

Special cases are as follows:

- The legacy extensions are lumped together as one 'big' extension, as
  has always been the case in OpenSBI code.
- The platform-defined vendor extensions are regarded as one extension.
- The Base extension cannot be disabled.
- sbi_ecall_replace implements multiple extensions, so it's not easy to
  avoid linking it in. Enable it always, and use #ifdef to
  disable/enable individual extensions.

Signed-off-by: Vivian Wang <dramforever@live.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

lib: sbi_ecall: Generate extensions list with carray

Instead of hard-coding the list of extensions in C code, use carray to
generate the list of extensions.

Using carray makes adding and removing extensions slightly cleaner. This
also paves the way for using Kconfig to disable unneeded extensions.

Signed-off-by: Vivian Wang <dramforever@live.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

Makefile: Add rules for carray sources in lib/sbi

Add back the missing rules needed to build carray files in lib/sbi. This
allows future usage of carray in lib/sbi.

Fixes: de80e9337d81 ("Makefile: Compile lib/utils sources separately for each platform")
Signed-off-by: Vivian Wang <dramforever@live.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

docs/firmware: update the document

Since
commit 9c07c513aa9b ("firmware:Remove FW_PAYLOAD_FDT_PATH compile-time option"),
the section where FDT would be embedded in has changed from *.text* to *.rodata*,
but some places in fw_payload.md and fw.md are still *.text*.
This patch updates the document.

Signed-off-by: Yangjie Zhang <pyjmstr@gmail.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

Makefile: Add cscope support

Add cscope support so that running `make cscope` will generate/update
cscope files used for source code browsing, while running `make
distclean` will remove the cscope files.

Also add entry in .gitignore to ignore generated cscope files.

Signed-off-by: Tan En De <ende.tan@linux.starfivetech.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>

docs: andes-ae350.md: Update ae350 documentation for fdt driver support

We update ae350 documentation to add details about platform device tree.
The nodes and their properties must be provided to properly initialize
data of underlying hardware and access their mmio registers.

Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

platform: andes/ae350: Add AE350 domain support

Add domains_init platform hook for Andes AE350, users can add domain
description in device tree and select FDT domain support in Kconfig
to achieve system-level partitioning.

Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

lib: utils/ipi: Add Andes fdt ipi driver support

Move Andes PLICSW ipi device to fdt ipi framework, this patch is based
on Leo's modified IPI scheme on PLICSW.

Current IPI scheme uses bit 0 of pending reigster on PLICSW to send IPI
from hart 0 to hart 7, but bit 0 needs to be hardwired to 0 according
to spec. After some investigation, self-IPI seems to be seldom or never
used, so we re-order the IPI scheme to support 8 core platforms.

dts example (Quad-core AX45MP):

  plicsw: interrupt-controller@e6400000 {
          compatible = "andestech,plicsw";
          reg = <0x00000000 0xe6400000 0x00000000 0x00400000>;
          interrupts-extended = <&CPU0_intc 3
                                 &CPU1_intc 3
                                 &CPU2_intc 3
                                 &CPU3_intc 3>;
          interrupt-controller;
          #address-cells = <2>;
          #interrupt-cells = <2>;
  };

Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

platform: andes/ae350: Add fw_platform_init for platform initialization

This patch adds fw_platform_init() to initialize ae350 platform.name
and platform.hart_count by parsing device tree.

Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

platform: andes/ae350: Use fdt irqchip driver

Andes PLIC is compatible with plic driver. The PLIC base address and
number of source can be obtained by parsing the device tree.

Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

lib: utils/reset: Add Andes fdt reset driver support

Add ATCWDT200 as reset device of AE350 platform, this driver requires
SMU to program the reset vector registers before triggering WDT software
restart signal.

dts example:

  smu@f0100000 {
    compatible = "andestech,atcsmu";
    reg = <0x00000000 0xf0100000 0x00000000 0x00001000>;
  };

  wdt: wdt@f0500000 {
    compatible = "andestech,atcwdt200";
    reg = <0x00000000 0xf0500000 0x00000000 0x00001000>;
    interrupts = <3 4>;
    interrupt-parent = <&plic0>;
    clock-frequency = <15000000>;
  };

Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

lib: utils/timer: Add Andes fdt timer support

Since we can get the PLMT base address and timer frequency from
device tree, move plmt timer device to fdt timer framework.

dts example (Quad-core AX45MP):

  cpus {
      ...
      timebase-frequency = <0x3938700>;
      ...
  }
  soc {
      ...
      plmt0@e6000000 {
          compatible = "andestech,plmt0";
          reg = <0x00 0xe6000000 0x00 0x100000>;
          interrupts-extended = <&cpu0_intc 0x07
                                 &cpu1_intc 0x07
                                 &cpu2_intc 0x07
                                 &cpu3_intc 0x07>;
      };
      ...
  }

Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

platform: andes/ae350: Use fdt serial driver

Andes UART is compatible with uart8250 driver. We can use
fdt_serial_init() as platform console init hook.

dts example:

  serial0: serial@f0300000 {
    compatible = "andestech,uart16550", "ns16550a";
    reg = <0x00000000 0xf0300000 0x00000000 0x00001000>;
    interrupts = <9 4>;
    interrupt-parent = <&plic0>;
    clock-frequency = <19660800>;
    current-speed = <38400>;
    reg-shift = <2>;
    reg-offset = <32>;
    reg-io-width = <4>;
    no-loopback-test = <1>;
  };

Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

platform: andes/ae350: Use kconfig to set platform version and default name

This patch makes andes platform name and version can be set in
menuconfig interface.

Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

platform: andes/ae350: Remove enabling cache from an350_final_init

The boot-time cache operations have been handled by U-boot SPL, so we
can drop duplicate code.

Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

lib: sbi: Add sbi_domain_root_add_memrange() API

This patch generalizes the logic to add a memory range with desired
alignment and flags of consecutive regions to the root domain.

Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

include: sbi: Fix grammar in comment

Fix minor grammar issue in function description.

Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

lib: sbi: Fix typo in comment

%s/is is/is

Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

include: sbi: Fix typo in comment

%s/Priviledge/Privilege

Signed-off-by: Yu Chien Peter Lin <peterlin@andestech.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

platform: generic: allwinner: add support for c9xx pmu

With the T-HEAD C9XX cores being designed before or during ratification
of the SSCOFPMF extension, they implement a PMU extension that behaves
very similar but not equal to it by providing overflow interrupts though
in a slightly different registers format.

The sun20i-d1 is using this core. So implement the necessary overrides
to allow its pmu to be used via the standard sbi-pmu extension.

For now it's also the only soc using this core, so keep the additional
code in the d1-space for now.

Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Guo Ren <guoren@kernel.org>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

platform: generic: add extensions_init handler and platform-override

Init of non-standard extensions is a platform-specific thing,
so allow generic platforms to do this via a platform-override.

Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Guo Ren <guoren@kernel.org>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

lib: sbi_platform: expose hart_features to extension_init callback

The platform-specific extension_init callback is supposed to
set specific things for the platform opensbi is running on.

So it's also the right place to override specific hart_features
if needed - when it's know that autodetection has provided
wrong results for example.

Suggested-by: Atish Patra <atishp@atishpatra.org>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Guo Ren <guoren@kernel.org>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

lib: sbi_hart: move hart_features struct to a public location

Platforms may need to override auto-detected hart features
in their override functions. So move the hart_features
struct to the sbi_hart.h header allowing us to pass it over
to platform-handlers.

Suggested-by: Atish Patra <atishp@atishpatra.org>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Guo Ren <guoren@kernel.org>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

lib: sbi_pmu: move pmu irq information into pmu itself

Don't spread checking for pmu extensions through the code
but instead introduce a sbi-pmu function that other code can
call to get the correct information about the existence of the
pmu interrupt.

Add a sbi_pmu_device override function to allow overridung this
bit as well if needed.

Reviewed-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Guo Ren <guoren@kernel.org>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>

docs: Fix some typos

We fix few typos in documentation.

Signed-off-by: zhangdongdong <zhangdongdong@eswincomputing.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Xiang W <wxjstz@126.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

docs/firmware: Update FW_JUMP documentation

Add a tip for OpenSBI's FW_JUMP which helps
users avoid overwriting the kernel.

Signed-off-by: Nylon Chen <nylon.chen@sifive.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

lib: utils/serial: add semihosting support

We add RISC-V semihosting based serial console for JTAG based early
debugging.

The RISC-V semihosting specification is available at:
https://github.com/riscv/riscv-semihosting-spec/blob/main/riscv-semihosting-spec.adoc

Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Signed-off-by: Kautuk Consul <kconsul@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

lib: sbi: Fix sbi_strnlen wrong count decrement

count(maxlen) should not be decremented here

Fixes: 1901e8a287bc ("platform: Add minimal libc support.")
Signed-off-by: Rahul Pathak <rpathak@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

lib: utils/fdt: Fix DT parsing in fdt_pmu_setup()

This patch does following fixes in fdt_pmu_setup():
1) If any of the event mapping DT property is absent or too small
   then don't skip parsing of other DT properties.
2) Return failure if sbi_pmu_add_hw_event_counter_map() fails.
3) Return failure if sbi_pmu_add_raw_event_counter_map() fails.

Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>

lib: sbi_misaligned_ldst: Set GVA if not emulating

If a particular misaligned load or store cannot be emulated at all, for
the redirected trap, trap.gva is set to 0, but it should be the same as
mstatus[h].GVA of the original trap. Fix this so that if the trap is
destined for HS-mode, hstatus.GVA is then set correctly.

Fixes: 1c4ce74f5128 ("lib: sbi: Set gva when creating sbi_trap_info")
Signed-off-by: Vivian Wang <dramforever@live.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

lib: sbi_trap: Add helper to get GVA in sbi_trap_regs

The GVA bit is in mstatus on RV64, and in mstatush in RV32. Refactor
code handling this in sbi_trap_handler into a helper function to extract
GVA from sbi_trap_regs, so that future code accessing GVA can be
XLEN-agnostic.

Signed-off-by: Vivian Wang <dramforever@live.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

docs: pmu: extend bindings example for Unmatched

Extend example for Unmatched board to provide SBI PMU bindings
for generalized and cache event's where they are applicable.

Signed-off-by: Nikita Shubin <n.shubin@yadro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

docs: pmu: fix Unmatched example typo

bitmap for MHPMCOUNTERx should be 0x18 and not 0x0c, we check
against SBI_PMU_FIXED_CTR_MASK which assumes than first 3 bits are
dedicated to mcycle, mtime and minstret, u74 has 2 hardware counters.

Reported-by: Zhang Xin <zhangxin.xa@gmail.com>
Signed-off-by: Nikita Shubin <n.shubin@yadro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>

include: sbi: Reduce includes in sbi_pmu.h

The sbi_pmu.h should only include minimal required headers whereas
sbi_pmu.c should include all required headers.

Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>

lib: sbi: Print platform PMU device at boot-time

Let us print the platform PMU device name at the boot-time so that users
know whether the underlying platform has custom per-HART PMU operations.

Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>