Tom Tromey [Sun, 20 Nov 2016 17:46:23 +0000 (10:46 -0700)]
Use gdbpy_ref in python.c
This changes more places in python.c to use gdbpy_ref.
Additionally, previously gdbpy_apply_type_printers would return
EXT_LANG_RC_ERROR if a type printer returned None. However, that
doesn't seem correct to me; this patch changes it to return
EXT_LANG_RC_NOP in this case.
2017-01-10 Tom Tromey <tom@tromey.com>
* python/python.c (eval_python_command, gdbpy_decode_line)
(gdbpy_run_events, gdbpy_start_type_printers)
(gdbpy_apply_type_printers): Use gdbpy_ref.
Tom Tromey [Sun, 20 Nov 2016 17:34:34 +0000 (10:34 -0700)]
Use gdbpy_ref in py-param.c
This changes py-param.c to use gdbpy_ref in a couple more spots.
2017-01-10 Tom Tromey <tom@tromey.com>
* python/py-param.c (get_doc_string, compute_enum_values): Use
gdbpy_ref.
Tom Tromey [Sun, 20 Nov 2016 17:31:17 +0000 (10:31 -0700)]
Use gdbpy_ref in py-inferior.c
This changes py-inferior.c to use gdbpy_ref in more places.
2017-01-10 Tom Tromey <tom@tromey.com>
* python/py-inferior.c (find_thread_object, build_inferior_list):
Use gdbpy_ref.
Tom Tromey [Sun, 20 Nov 2016 17:27:59 +0000 (10:27 -0700)]
Use gdbpy_ref in py_print_frame
This changes py_print_frame to use gdbpy_ref in more places.
2017-01-10 Tom Tromey <tom@tromey.com>
* python/py-framefilter.c (py_print_frame): Use gdbpy_ref.
Tom Tromey [Sun, 20 Nov 2016 17:25:29 +0000 (10:25 -0700)]
Use gdbpy_ref in bpfinishpy_out_of_scope
This changes bpfinishpy_out_of_scope to use gdbpy_ref.
2017-01-10 Tom Tromey <tom@tromey.com>
* python/py-finishbreakpoint.c (bpfinishpy_out_of_scope): Use
gdbpy_ref.
Tom Tromey [Sun, 20 Nov 2016 17:23:08 +0000 (10:23 -0700)]
Use gdbpy_ref in py-cmd.c
This changes py-cmd.c to use gdbpy_ref in more places. This also
fixes a latent memory leak in cmdpy_completer_helper, which
unnecessarily increfs the result of PyObject_CallMethodObjArgs. This
is not needed because that function returns a new reference.
2017-01-10 Tom Tromey <tom@tromey.com>
* python/py-cmd.c (cmdpy_completer_helper): Use gdbpy_ref. Remove
extra incref.
(cmdpy_completer_handle_brkchars, cmdpy_completer, cmdpy_init):
Use gdbpy_ref.
Tom Tromey [Sun, 20 Nov 2016 17:13:31 +0000 (10:13 -0700)]
Use gdbpy_ref in gdbpy_breakpoint_cond_says_stop
This changes gdbpy_breakpoint_cond_says_stop to use gdbpy_ref rather
than explicit reference management.
2017-01-10 Tom Tromey <tom@tromey.com>
* python/py-breakpoint.c (gdbpy_breakpoint_cond_says_stop): Use
gdbpy_ref.
Tom Tromey [Sun, 20 Nov 2016 17:10:58 +0000 (10:10 -0700)]
Use gdbpy_ref in archpy_disassemble
This changes archpy_disassemble to use gdbpy_ref. It also fixes a
latent bug where archpy_disassemble was decref'ing the results of a
all to PyArg_ParseTupleAndKeywords. This is incorrect because
PyArg_ParseTupleAndKeywords returns borrowed references.
2017-01-10 Tom Tromey <tom@tromey.com>
* python/py-arch.c (archpy_disassemble): Use gdbpy_ref. Don't
decref results of PyArg_ParseTupleAndKeywords.
Tom Tromey [Sat, 12 Nov 2016 19:08:17 +0000 (12:08 -0700)]
Change python_run_simple_file to use gdbpy_ref
This changes python_run_simple_file to use gdbpy_ref and
unique_xmalloc_ptr. Thi fixes a latent bug in this function, where
the error path previously ran the cleanups and then referred to one of
the objects just freed.
2017-01-10 Tom Tromey <tom@tromey.com>
* python/python.c (python_run_simple_file): Use
unique_xmalloc_ptr, gdbpy_ref.
Tom Tromey [Sat, 12 Nov 2016 19:07:16 +0000 (12:07 -0700)]
Use gdbpy_ref in py-prettyprint.c
This changes some spots in py-prettyprint.c to use gdbpy_ref. It also
changes push_dummy_python_frame to be a class, rather than having it
create a cleanup.
2017-01-10 Tom Tromey <tom@tromey.com>
* python/py-prettyprint.c (print_stack_unless_memory_error)
(print_string_repr, print_children): Use gdbpy_ref.
(dummy_python_frame): New class.
(dummy_python_frame::dummy_python_frame): Rename from
push_dummy_python_frame.
(py_restore_tstate): Remove.
Tom Tromey [Sat, 12 Nov 2016 18:57:45 +0000 (11:57 -0700)]
Use gdbpy_ref in py_print_frame
This changes py_print_frame to use gdbpy_ref in a few spots.
2017-01-10 Tom Tromey <tom@tromey.com>
* python/py-framefilter.c (py_print_frame): Use gdbpy_ref.
Tom Tromey [Sat, 12 Nov 2016 18:53:50 +0000 (11:53 -0700)]
Remove ensure_python_env
All of gdb has been converted away from ensure_python_env and
varobj_ensure_python_env now; so remove them.
2017-01-10 Tom Tromey <tom@tromey.com>
* python/python.c (ensure_python_env, restore_python_env):
Remove.
* python/python-internal.h (ensure_python_env): Don't declare.
* varobj.h (varobj_ensure_python_env): Don't declare.
* varobj.c (varobj_ensure_python_env): Remove.
Tom Tromey [Sat, 12 Nov 2016 18:51:59 +0000 (11:51 -0700)]
Use gdbpy_enter_varobj in varobj_value_get_print_value
This changes the last function in varobj.c to use gdbpy_enter_varobj.
2017-01-10 Tom Tromey <tom@tromey.com>
* varobj.c (varobj_value_get_print_value): Use
gdbpy_enter_varobj.
Tom Tromey [Sat, 12 Nov 2016 18:48:48 +0000 (11:48 -0700)]
Change type of encoding argument to gdbpy_extract_lazy_string
This changes gdbpy_extract_lazy_string's "encoding" argument to be a
unique_xmalloc_ptr. I chose this rather than std::string because it
can sometimes be NULL.
2017-01-10 Tom Tromey <tom@tromey.com>
* python/py-prettyprint.c (print_string_repr, print_children):
Update.
* python/py-lazy-string.c (gdbpy_extract_lazy_string): Change type
of "encoding".
* varobj.c (varobj_value_get_print_value): Update.
* python/python-internal.h (gdbpy_extract_lazy_string): Update.
Tom Tromey [Sat, 12 Nov 2016 18:37:52 +0000 (11:37 -0700)]
Use gdbpy_enter_varobj in more of varobj.c
This converts most of the remaining functions in varobj.c to use
gdbpy_enter_varobj.
2017-01-10 Tom Tromey <tom@tromey.com>
* varobj.c (varobj_get_display_hint)
(dynamic_varobj_has_child_method, install_new_value_visualizer)
(varobj_set_visualizer, free_variable): Use
gdbpy_enter_varobj.
Tom Tromey [Sat, 12 Nov 2016 18:32:05 +0000 (11:32 -0700)]
Use gdbpy_enter in python.c
This changes the last functions in python.c to use gdbpy_enter. I
split gdbpy_finish_initialization into two functions in order to avoid
some "goto"s.
2017-01-10 Tom Tromey <tom@tromey.com>
* python/python.c (python_command): Use gdbpy_enter, gdbpy_ref.
(do_finish_initialization): New function. Use gdbpy_ref.
(gdbpy_finish_initialization): Use gdbpy_enter. Call
do_finish_initialization.
Tom Tromey [Sat, 12 Nov 2016 18:23:36 +0000 (11:23 -0700)]
Use gdbpy_enter in py-param.c
This converts the remaining functions in py-param.c to use
gdbpy_enter.
2017-01-10 Tom Tromey <tom@tromey.com>
* python/py-param.c (get_set_value, get_show_value): Use
gdbpy_enter, gdbpy_ref.
Tom Tromey [Sat, 12 Nov 2016 18:15:46 +0000 (11:15 -0700)]
Use gdbpy_enter in fnpy_call
This changes fnpy_call to use gdbpy_enter and gdbpy_ref.
2017-01-10 Tom Tromey <tom@tromey.com>
* python/py-function.c (fnpy_call): Use gdbpy_enter, gdbpy_ref.
Tom Tromey [Sat, 12 Nov 2016 18:12:41 +0000 (11:12 -0700)]
Use gdbpy_enter in cmdpy_function
This changes cmdpy_function to use gdbpy_enter and gdbpy_ref.
2017-01-10 Tom Tromey <tom@tromey.com>
* python/py-cmd.c (cmdpy_function): Use gdbpy_enter, gdbpy_ref.
Tom Tromey [Wed, 9 Nov 2016 03:14:32 +0000 (20:14 -0700)]
Use gdbpy_enter_varobj in py-varobj.c
This converts the remaining functions in py-varobj.c to use
gdbpy_enter_varobj.
2017-01-10 Tom Tromey <tom@tromey.com>
* python/py-varobj.c (py_varobj_iter_dtor, py_varobj_iter_next):
Use gdbpy_enter_varobj.
Tom Tromey [Tue, 8 Nov 2016 23:18:24 +0000 (16:18 -0700)]
Introduce gdbpy_enter_varobj and use it
This introduces gdbpy_enter_varobj, a subclass of gdbpy_enter; then
changes one function in py-varobj.c to use it. gdbpy_enter_varobj
takes a varobj as an argument, similar to varobj_ensure_python_env.
2017-01-10 Tom Tromey <tom@tromey.com>
* varobj.c (gdbpy_enter_varobj): New constructor.
* python/python-internal.h (gdbpy_enter_varobj): New class.
* python/py-varobj.c (py_varobj_get_iterator): Use
gdbpy_enter_varobj.
Tom Tromey [Tue, 8 Nov 2016 22:47:39 +0000 (15:47 -0700)]
Use gdbpy_enter in py-xmethod.c
This changes the remaining functions in py-xmethod.c to use
gdbpy_enter; using gdbpy_ref and unique_xmalloc_ptr as
appropriate.
2017-01-10 Tom Tromey <tom@tromey.com>
* python/py-xmethods.c (gdbpy_get_xmethod_result_type): Use
gdbpy_enter, gdbpy_ref, unique_xmalloc_ptr.
(gdbpy_invoke_xmethod): Use gdbpy_ref, gdbpy_enter.
(gdbpy_get_xmethod_arg_types): Use gdbpy_ref,
unique_xmalloc_ptr.
(gdbpy_get_xmethod_arg_types): Use gdbpy_ref, gdbpy_enter.
Tom Tromey [Tue, 8 Nov 2016 22:35:24 +0000 (15:35 -0700)]
Use gdbpy_ref in invoke_match_method
Change invoke_match_method to use gdbpy_ref.
I neglected to convert this function in my earlier series.
2017-01-10 Tom Tromey <tom@tromey.com>
* python/py-xmethods.c (invoke_match_method): Use
gdbpy_ref.
Tom Tromey [Tue, 8 Nov 2016 22:34:55 +0000 (15:34 -0700)]
Use gdbpy_enter in gdbpy_get_matching_xmethod_workers
Change gdbpy_get_matching_xmethod_workers to use gdbpy_enter and
gdbpy_ref.
2017-01-10 Tom Tromey <tom@tromey.com>
* python/py-xmethods.c (gdbpy_get_matching_xmethod_workers): use
gdbpy_enter, gdbpy_ref.
Tom Tromey [Tue, 8 Nov 2016 22:15:01 +0000 (15:15 -0700)]
Use gdbpy_enter in python_interactive_command
This changes python_interactive_command to use gdbpy_enter.
Previously this function was leaving a dangling cleanup -- this is
sort of ok in a command function, but IMO it's still better to clean
up.
2017-01-10 Tom Tromey <tom@tromey.com>
* python/python.c (python_interactive_command): Use gdbpy_enter.
Tom Tromey [Tue, 8 Nov 2016 22:13:49 +0000 (15:13 -0700)]
Use gdbpy_enter in gdbpy_before_prompt_hook
Change gdbpy_before_prompt_hook to use gdbpy_enter and gdbpy_ref.
This also rearranges the function a tiny bit to make it more clear.
2017-01-10 Tom Tromey <tom@tromey.com>
* python/python.c (gdbpy_before_prompt_hook): Use gdbpy_enter,
gdbpy_ref.
Tom Tromey [Tue, 8 Nov 2016 18:38:22 +0000 (11:38 -0700)]
Use gdbpy_enter in py-prettyprint.c
Change py-prettyprint.c to use gdbpy_enter.
2017-01-10 Tom Tromey <tom@tromey.com>
* python/py-prettyprint.c (gdbpy_apply_val_pretty_printer): Use
gdbpy_enter, gdbpy_ref, unique_xmalloc_ptr.
Tom Tromey [Tue, 8 Nov 2016 18:11:55 +0000 (11:11 -0700)]
Introduce htab_up and use gdbpy_enter in py-framefilter.c
This introduces a new "htab_up" typedef, which is a std::unique_ptr
that can call htab_delete. Then it changes some code in
py-framefilter.c to use both gdbpy_enter and the new htab_up.
2017-01-10 Tom Tromey <tom@tromey.com>
* utils.h (htab_deleter): New struct.
(htab_up): New typedef.
* python/py-framefilter.c (gdbpy_apply_frame_filter): Use
gdbpy_enter, gdbpy_ref, htab_up.
Tom Tromey [Tue, 8 Nov 2016 03:41:50 +0000 (20:41 -0700)]
Use gdbpy_enter in py-unwind.c
Change py-unwind.c to use gdbpy_enter.
2017-01-10 Tom Tromey <tom@tromey.com>
* python/py-unwind.c (pending_frame_invalidate): Remove.
(pyuw_sniffer): Use gdbpy_enter and gdbpy_ref.
Tom Tromey [Mon, 7 Nov 2016 23:13:40 +0000 (16:13 -0700)]
Use gdbpy_enter in py-xmethods.c
Change the simple parts of py-xmethods.c to use gdbpy_enter.
2017-01-10 Tom Tromey <tom@tromey.com>
* python/py-xmethods.c (gdbpy_free_xmethod_worker_data)
(gdbpy_clone_xmethod_worker_data): Use gdbpy_enter.
Tom Tromey [Mon, 7 Nov 2016 23:12:17 +0000 (16:12 -0700)]
Use gdbpy_enter in py-type.c
Change py-type.c to use gdbpy_enter.
2017-01-10 Tom Tromey <tom@tromey.com>
* python/py-type.c (save_objfile_types): Use gdbpy_enter.
Tom Tromey [Mon, 7 Nov 2016 23:11:37 +0000 (16:11 -0700)]
Use gdbpy_enter in python.c
Change the simple parts of python.c to use gdbpy_enter.
2017-01-10 Tom Tromey <tom@tromey.com>
* python/python.c (gdbpy_eval_from_control_command)
(gdbpy_source_script, gdbpy_run_events)
(gdbpy_source_objfile_script, gdbpy_execute_objfile_script)
(gdbpy_free_type_printers, gdbpy_finish_initialization): Use
gdbpy_enter.
Tom Tromey [Mon, 7 Nov 2016 23:08:36 +0000 (16:08 -0700)]
Use gdbpy_enter in py-progspace.c
Change py-progspace.c to use gdbpy_enter.
2017-01-10 Tom Tromey <tom@tromey.com>
* python/py-progspace.c (py_free_pspace): Use gdbpy_enter.
Tom Tromey [Mon, 7 Nov 2016 23:07:53 +0000 (16:07 -0700)]
Use gdbpy_enter in py-objfile.c
Change py-objfile.c to use gdbpy_enter.
2017-01-10 Tom Tromey <tom@tromey.com>
* python/py-objfile.c (py_free_objfile): Use gdbpy_enter.
Tom Tromey [Mon, 7 Nov 2016 23:06:26 +0000 (16:06 -0700)]
Use gdbpy_enter in py-inferior.c
Change py-inferior.c to use gdbpy_enter.
2017-01-10 Tom Tromey <tom@tromey.com>
* python/py-inferior.c (python_on_normal_stop, python_on_resume)
(python_on_inferior_call_pre, python_on_inferior_call_post)
(python_on_memory_change, python_on_register_change)
(python_inferior_exit, python_new_objfile, add_thread_object)
(delete_thread_object, py_free_inferior): Use gdbpy_enter.
Tom Tromey [Mon, 7 Nov 2016 23:03:10 +0000 (16:03 -0700)]
Use gdbpy_enter in py-finishbreakpoint.c
Change py-finishbreakpoint.c to use gdbpy_enter.
2017-01-10 Tom Tromey <tom@tromey.com>
* python/py-finishbreakpoint.c (bpfinishpy_handle_stop)
(bpfinishpy_handle_exit): Use gdbpy_enter.
Tom Tromey [Mon, 7 Nov 2016 23:02:16 +0000 (16:02 -0700)]
Use gdbpy_enter in py-cmd.c
Change py-cmd.c to use gdbpy_enter.
2017-01-10 Tom Tromey <tom@tromey.com>
* python/py-cmd.c (cmdpy_destroyer)
(cmdpy_completer_handle_brkchars, cmdpy_completer): Use
gdbpy_enter.
Tom Tromey [Mon, 7 Nov 2016 22:59:41 +0000 (15:59 -0700)]
Use gdbpy_enter in py-breakpoint.c
Change py-breakpoint.c to use gdbpy_enter.
2017-01-10 Tom Tromey <tom@tromey.com>
* python/py-breakpoint.c (gdbpy_breakpoint_cond_says_stop): Use
gdbpy_enter.
(gdbpy_breakpoint_has_cond): Likewise.
Tom Tromey [Mon, 7 Nov 2016 22:56:57 +0000 (15:56 -0700)]
Introduce gdbpy_enter
This introduces gdbpy_enter, a class that can be used to acquire and
release the Python GIL, and also set other Python-related globals used
by gdb. ensure_python_env is rewritten in terms of this new class.
2017-01-10 Tom Tromey <tom@tromey.com>
* python/python.c (gdbpy_enter): New constructor.
(~gdbpy_enter): New destructor.
(restore_python_env, ensure_python_env): Rewrite.
* python/python-internal.h (gdbpy_enter): New class.
Tom Tromey [Mon, 7 Nov 2016 04:51:20 +0000 (21:51 -0700)]
Use gdbpy_ref in gdbpy_lookup_symbol
This changes gdbpy_lookup_symbol to use gdbpy_ref.
2017-01-10 Tom Tromey <tom@tromey.com>
* python/py-symbol.c (gdbpy_lookup_symbol): Use gdbpy_ref.
Tom Tromey [Mon, 7 Nov 2016 04:50:36 +0000 (21:50 -0700)]
Use gdbpy_ref in py-value.c
This changes a few functions in py-value.c to use gdbpy_ref.
2017-01-10 Tom Tromey <tom@tromey.com>
* python/py-value.c (value_has_field, get_field_flag)
(get_field_type, valpy_getitem, convert_value_from_python): Use
gdbpy_ref.
Tom Tromey [Mon, 7 Nov 2016 04:49:34 +0000 (21:49 -0700)]
Use gdbpy_ref in python.c
This changes a couple of functions in python.c to use gdbpy_ref.
2017-01-10 Tom Tromey <tom@tromey.com>
* python/python.c (gdbpy_progspaces, gdbpy_objfiles): Use
gdbpy_ref.
Tom Tromey [Mon, 7 Nov 2016 04:37:01 +0000 (21:37 -0700)]
Use gdbpy_ref in py-prettyprint.c
This changes several functions in py-prettyprint.c to use
gdbpy_ref.
2017-01-10 Tom Tromey <tom@tromey.com>
* python/py-prettyprint.c (search_pp_list)
(find_pretty_printer_from_objfiles)
(find_pretty_printer_from_progspace)
(find_pretty_printer_from_gdb, find_pretty_printer)
(gdbpy_get_display_hint, gdbpy_get_varobj_pretty_printer): Use
gdbpy_ref.
Tom Tromey [Mon, 7 Nov 2016 04:29:12 +0000 (21:29 -0700)]
Use gdbpy_ref in call_doc_function
This changes call_doc_function to use gdbpy_ref.
2017-01-10 Tom Tromey <tom@tromey.com>
* python/py-param.c (call_doc_function): Use gdbpy_ref.
Tom Tromey [Mon, 7 Nov 2016 04:25:34 +0000 (21:25 -0700)]
Use gdbpy_ref in py-linetable.c
This changes some code in py-linetable.c to use gdbpy_ref.
2017-01-10 Tom Tromey <tom@tromey.com>
* python/py-linetable.c (build_line_table_tuple_from_pcs)
(ltpy_get_all_source_lines): Use gdbpy_ref.
Tom Tromey [Mon, 7 Nov 2016 04:25:31 +0000 (21:25 -0700)]
Use gdbpy_ref in py-framefilter.c
This changes some code in py-framefilter.c to use gdbpy_ref.
2017-01-10 Tom Tromey <tom@tromey.com>
* python/py-framefilter.c (extract_sym, extract_value)
(get_py_iter_from_func, bootstrap_python_frame_filters): Use
gdbpy_ref.
Tom Tromey [Mon, 7 Nov 2016 04:25:22 +0000 (21:25 -0700)]
Use gdbpy_ref in gdbpy_breakpoints
This changes gdbpy_breakpoints to use gdbpy_ref.
2017-01-10 Tom Tromey <tom@tromey.com>
* python/py-breakpoint.c (gdbpy_breakpoints): Use gdbpy_ref.
Tom Tromey [Mon, 7 Nov 2016 04:23:31 +0000 (21:23 -0700)]
Use gdbpy_ref in gdbpy_inferiors
This changes gdbpy_inferiors to use gdbpy_ref.
2017-01-10 Tom Tromey <tom@tromey.com>
* python/py-inferior.c (gdbpy_inferiors): Use gdbpy_ref.
Tom Tromey [Mon, 7 Nov 2016 04:21:14 +0000 (21:21 -0700)]
Use gdbpy_ref in py-function.c
This changes some code in py-function.c to use gdbpy_ref.
2017-01-10 Tom Tromey <tom@tromey.com>
* python/py-function.c (convert_values_to_python, fnpy_init): Use
gdbpy_ref.
Tom Tromey [Mon, 7 Nov 2016 04:10:18 +0000 (21:10 -0700)]
Use gdbpy_ref in gdbpy_string_to_argv
This chanes gdbpy_string_to_argv to use gdbpy_ref.
2017-01-10 Tom Tromey <tom@tromey.com>
* python/py-cmd.c (gdbpy_string_to_argv): Use gdbpy_ref.
Tom Tromey [Mon, 7 Nov 2016 03:59:51 +0000 (20:59 -0700)]
Use gdbpy_ref in py-type.c
This changes py-type.c to use gdbpy_ref.
This results in simpler logic and the removal of "goto"s.
2017-01-10 Tom Tromey <tom@tromey.com>
* python/py-type.c (convert_field, make_fielditem, typy_fields)
(typy_range): Use gdbpy_ref.
Tom Tromey [Mon, 7 Nov 2016 03:42:32 +0000 (20:42 -0700)]
Change event code to use gdbpy_ref
This changes the event code in the Python layer to use
gdbpy_ref, simplifying the logic in many places.
It also changes evpy_emit_event not to steal a reference to its
argument. This is simpler to do now that gdbpy_ref is in use;
it's also a reasonable cleanup in its own right. While doing this I
realized that evpy_emit_event should not be calling gdbpy_print_stack
(all the outermost callers do this if needed), so I removed this as
well.
2017-01-10 Tom Tromey <tom@tromey.com>
* python/py-threadevent.c (create_thread_event_object): Use
gdbpy_ref.
* python/py-stopevent.c (create_stop_event_object): Simplify.
(emit_stop_event): Use gdbpy_ref.
* python/py-signalevent.c (create_signal_event_object): Use
gdbpy_ref.
* python/py-newobjfileevent.c (create_new_objfile_event_object)
(emit_new_objfile_event, create_clear_objfiles_event_object)
(emit_clear_objfiles_event): Use gdbpy_ref.
* python/py-infevents.c (create_inferior_call_event_object)
(create_register_changed_event_object)
(create_memory_changed_event_object, emit_inferior_call_event)
(emit_memory_changed_event, emit_register_changed_event): Use
gdbpy_ref.
* python/py-exitedevent.c (create_exited_event_object)
(emit_exited_event): Use gdbpy_ref.
* python/py-event.h (evpy_emit_event): Remove
CPYCHECKER_STEALS_REFERENCE_TO_ARG annotation.
* python/py-event.c (evpy_emit_event): Use gdbpy_ref.
* python/py-continueevent.c (emit_continue_event): Use
gdbpy_ref.
* python/py-breakpoint.c (gdbpy_breakpoint_created)
(gdbpy_breakpoint_deleted, gdbpy_breakpoint_modified): Use
gdbpy_ref.
* python/py-bpevent.c (create_breakpoint_event_object): Use
gdbpy_ref.
Tom Tromey [Sat, 5 Nov 2016 19:43:23 +0000 (13:43 -0600)]
Introduce py-ref.h
This patch introduces class gdbpy_ref, which is a sort of smart
pointer that owns a single Python reference to a PyObject. This class
acts a bit like unique_ptr, but also a bit like shared_ptr (in that
copies do what you might expect); I considered going solely with
unique_ptr but it seemed quite strange to have a unique_ptr that
actually manages a shared resource.
Subsequent patches use this new class to simplify logic in the Python
layer.
2017-01-10 Tom Tromey <tom@tromey.com>
* python/py-ref.h: New file.
GDB Administrator [Wed, 11 Jan 2017 00:00:35 +0000 (00:00 +0000)]
Automatic date update in version.in
H.J. Lu [Tue, 10 Jan 2017 22:18:11 +0000 (14:18 -0800)]
i386/x32: Align .eh_frame section to 4 bytes
.eh_frame section covering PLT sections should be aligned to 4 bytes
for i386 and x32.
bfd/
* elf32-i386.c (elf_i386_check_relocs): Align .eh_frame section
to 4 bytes.
* elf64-x86-64.c (elf_x86_64_create_dynamic_sections): Align
.eh_frame section to 4 bytes for x32.
(elf_x86_64_check_relocs): Likewise.
ld/
* testsuite/ld-x86-64/pr20830b.d: Updated.
H.J. Lu [Tue, 10 Jan 2017 21:57:39 +0000 (13:57 -0800)]
X32: Place .plt.got section after .plt section
This patch places .plt.got section after .plt section for x32.
* emulparams/elf32_x86_64.sh (TINY_READONLY_SECTION): New.
* testsuite/ld-x86-64/pr20830.d: Renamed to ...
* testsuite/ld-x86-64/pr20830a.d: This. Updated.
* testsuite/ld-x86-64/pr20830b.d: New file.
* testsuite/ld-x86-64/x86-64.exp: Rename pr20830 to pr20830a.
Run pr20830b.
H.J. Lu [Tue, 10 Jan 2017 21:31:59 +0000 (13:31 -0800)]
i386/x86-64: Add unwind info for .plt.got section
When there are both PLT and GOT references to the same function symbol,
linker combines GOTPLT and GOT slots into a single GOT slot and create
an entry in .plt.got section for PLT access via the GOT slot. This
patch adds unwind info for .plt.got section.
bfd/
PR ld/20830
* elf32-i386.c (elf_i386_eh_frame_plt_got): New.
(PLT_GOT_FDE_LENGTH): Likewise.
(elf_i386_plt_layout): Add eh_frame_plt_got and
eh_frame_plt_got_size.
(elf_i386_plt): Updated.
(elf_i386_link_hash_table): Add plt_got_eh_frame.
(elf_i386_check_relocs): Create .eh_frame section for .plt.got.
(elf_i386_size_dynamic_sections): Allocate and initialize
.eh_frame section for .plt.got.
(elf_i386_finish_dynamic_sections): Adjust .eh_frame section for
.plt.got.
(elf_i386_nacl_plt): Add FIXME for eh_frame_plt_got and
eh_frame_plt_got_size.
* elf64-x86-64.c (elf_x86_64_eh_frame_plt_got): New.
(PLT_GOT_FDE_LENGTH): Likewise.
(elf_x86_64_backend_data): Add eh_frame_plt_got and
eh_frame_plt_got_size.
(elf_x86_64_arch_bed): Updated.
(elf_x86_64_bnd_arch_bed): Add FIXME for eh_frame_plt_got and
eh_frame_plt_got_size.
(elf_x86_64_nacl_arch_bed): Likewise.
(elf_x86_64_link_hash_table): Add plt_got_eh_frame.
(elf_x86_64_check_relocs): Create .eh_frame section for .plt.got.
(elf_x86_64_size_dynamic_sections): Allocate and initialize
.eh_frame section for .plt.got.
(elf_x86_64_finish_dynamic_sections): Adjust .eh_frame section
for .plt.got.
ld/
PR ld/20830
* testsuite/ld-i386/i386.exp: Run pr20830.
* testsuite/ld-x86-64/x86-64.exp: Likewise.
* testsuite/ld-i386/pr20830.d: New file.
* testsuite/ld-i386/pr20830.s: Likewise.
* testsuite/ld-x86-64/pr20830.d: Likewise.
* testsuite/ld-x86-64/pr20830.s: Likewise.
Alan Modra [Tue, 10 Jan 2017 21:11:53 +0000 (07:41 +1030)]
[GOLD] PowerPC64 TOC indirect to TOC relative code editing
Doesn't yet trim off the unused TOC entries.
* powerpc.cc (class Powerpc_copy_relocs): New.
(Powerpc_copy_relocs::emit): New function.
(Powerpc_relobj::relatoc_, toc_, no_toc_opt_): New variables.
(Powerpc_relobj::toc_shndx, set_no_toc_opt, no_toc_opt): New inlines.
(Powerpc_relobj::do_relocate_sections): New function.
(Powerpc_relobj::make_toc_relative): Likewise.
(Powerpc_relobj::do_find_special_sections): Stash away .rela.toc
and .toc too.
(ok_lo_toc_insn): Move earlier, and handle more insns.
(Target_powerpc::Scan::local): If optimizing toc accesses, set
no_toc_opt for entries we can't edit. Check insn validity.
Emit "toc optimization is not supported" warning, downgraded
from error.
(Target_powerpc::Scan::global): Likewise.
(Target_powerpc::Relocate::relocate): Edit TOC indirect code
to TOC relative. Don't emit "toc optimization is not supported"
error here.
H.J. Lu [Tue, 10 Jan 2017 19:30:25 +0000 (11:30 -0800)]
Don't use elf_i386_eh_frame_plt directly
Use eh_frame_plt_size and eh_frame_plt from elf_i386_plt_layout for
.eh_frame covering the .plt section.
* elf32-i386.c (elf_i386_size_dynamic_sections): Set
plt_eh_frame->size to eh_frame_plt_size and use eh_frame_plt.
H.J. Lu [Tue, 10 Jan 2017 18:54:39 +0000 (10:54 -0800)]
i386: Pass -Wl,-R,tmpdir/-Wl --as-needed to $CC
Since linker tests were changed to use $CC, instead of $LD, we need
to pass -Wl,-R,tmpdir and -Wl,--as-needed to $CC.
* testsuite/ld-i386/i386.exp: Pass -Wl,-R,tmpdir to GCC driver.
* testsuite/ld-i386/tls.exp: Likewise.
Simon Marchi [Tue, 10 Jan 2017 16:30:47 +0000 (11:30 -0500)]
Change return type of ui_out redirect to void
All implementations of redirect/do_redirect in the ui_out subsystem
always return 0 (success). We can therefore clean it up and make them
return void.
gdb/ChangeLog:
* cli-out.c (cli_ui_out::do_redirect): Change return type to
void.
* cli-out.h (cli_ui_out::do_redirect): Likewise.
* mi/mi-out.c (mi_ui_out::do_redirect): Likewise.
* mi/mi-out.h (mi_ui_out::do_redirect): Likewise.
* ui-out.c (ui_out::redirect): Likewise.
* ui-out.h (ui_out::redirect, ui_out::do_redirect): Likewise.
* cli/cli-logging.c (set_logging_redirect): Update call site of
ui_out::redirect.
(handle_redirections): Likewise.
* scm-ports.c (ioscm_with_output_to_port_worker): Likewise.
* top.c (execute_command_to_string): Likewise.
* utils.c (do_ui_out_redirect_pop): Likewise.
Cary Coutant [Tue, 10 Jan 2017 15:46:30 +0000 (07:46 -0800)]
Refactor Sized_relobj_file::do_relocate_sections.
gold/
* aarch64.cc (AArch64_relobj::do_relocate_sections): Call
Sized_relobj_file::relocate_section_range().
* arm.cc (Arm_relobj::do_relocate_sections): Likewise.
* object.h (Sized_relobj_file::relocate_section_range): New method.
* reloc.cc (Sized_relobj_file::do_relocate_sections): Move
implementation...
(Sized_relobj_file::relocate_section_range): ...to new method.
Simon Marchi [Tue, 10 Jan 2017 15:16:26 +0000 (10:16 -0500)]
Update help of the "frame" command
The help message of the "frame" command states that nothing is printed
if the command is executed from the command file or user-defined
command. My testing leads me to think that this is not true (at least
today).
(gdb) bt
#0 bar (n=17) at test.c:9
#1 0x00000000004006e0 in foo (v=17) at test.c:13
#2 0x00000000004006f0 in main () at test.c:21
(gdb) frame
#0 bar (n=17) at test.c:9
9 baz(n);
(gdb) define foo
Type commands for definition of "foo".
End with a line saying just "end".
>frame 1
>end
(gdb) foo
#1 0x00000000004006e0 in foo (v=17) at test.c:13
13 bar(v);
This patch simply removes that bit from the help message. I didn't find
anything corresponding to this in the documentation that needs to be
fixed.
The behavior change corresponding to this documentation change was done
in commit
b00771232fab861fb31e42dfd5f6643ba1b43cc9.
gdb/ChangeLog:
* stack.c (_initialize_stack): Update "frame" command help message.
Tristan Gingold [Tue, 10 Jan 2017 13:43:01 +0000 (14:43 +0100)]
Fix sleb128-8 regressions.
gas/
* testsuite/gas/all/sleb128-8.d: Adjust test.
* testsuite/gas/all/gas.exp (test_cond): Likewise.
Nick Clifton [Tue, 10 Jan 2017 11:45:12 +0000 (11:45 +0000)]
Fix compile time warning about pointer comparison.
PR 21034
* stabs.c (parse_stab_members): Fix thinko checking for g++
version 1 stabs information.
Nick Clifton [Tue, 10 Jan 2017 11:28:36 +0000 (11:28 +0000)]
Updated Swedish translations for GAS and LD
Graham Markall [Thu, 8 Dec 2016 16:58:23 +0000 (16:58 +0000)]
[ARC] Add new linker emulation for nps
The arc700 nps variant uses some specific named sections to
facilitate its CMEM based instructions, which operate on memory
regions fixed at specific addresses.
This commit adds the arclinux_nps emulation, which is based on the
arclinux emulation. The new emulation uses the OTHER_SECTIONS
variable in the emulation parameters script to provide symbols
mapping to various locations in the CMEM space on nps.
The accompanying test ensures that all symbols are provided at the
correct address in the linker script.
ld/ChangeLog:
* Makefile.am: Add earclinux_nps.c target and add to
ALL_EMULATION_SOURCES.
* Makefile.in: Likewise, regenerated.
* configure.tgt: Add arclinux_nps as an extra emulation for
arc*-*-elf* and arc*-*-linux*.
* emulparams/arc-nps.sh: New file.
* emulparams/arclinux_nps.sh: New file.
* testsuite/ld-arc/arclinux-nps.d,
* testsuite/ld-arc/arclinux-nps.s: New test.
Tristan Gingold [Mon, 9 Jan 2017 14:50:32 +0000 (15:50 +0100)]
This patch ensure same output for sleb128 with large number.
gas/
* read.c (emit_leb128_expr): Extended unsigned big number for
sleb128.
* testsuite/gas/all/gas.exp (test_cond): Add sleb128-8 test.
* testsuite/gas/all/sleb128.d: New test.
* testsuite/gas/all/sleb128.s: New test source.
Alan Modra [Mon, 9 Jan 2017 23:58:20 +0000 (10:28 +1030)]
[GOLD] Fix tests for powerpc64
PowerPC64 defines .TOC. rather than _GLOBAL_OFFSET_TABLE_, and
what's more, doesn't define it at all unless referenced. For ELFv1
ABI the symbol isn't normally referenced, so modify the test to accept
.TOC. as a variant of _GLOBAL_OFFSET_TABLE_ and 0 or 1 occurrences.
copy_test_relro as written doesn't need copy relocs on PowerPC64.
PowerPC64 is always PIC. So, modify copy_test_relro to test that the
existing vars are in fact read-only directly by deliberately causing a
sigsegv, and add another couple of vars that do cause copy relocs even
when PIC.
* testsuite/ver_test_8.sh: Accept .TOC. in lieu of
_GLOBAL_OFFSET_TABLE_. Allow zero count.
* testsuite/copy_test_relro_1.cc (c, q): New vars.
* testsuite/copy_test_relro.cc: Rewrite to test read-only
status of variables directly. Reference new vars in
read-only data.
Alan Modra [Mon, 9 Jan 2017 23:54:09 +0000 (10:24 +1030)]
[GOLD] Add --secure-plt option for ppc32
Added just to accept, and ignore. gcc since 2015-10-21, when
configured with --enable-secureplt passes this option to the linker.
As powerpc gold cannot link --bss-plt code successfully, gold needs to
accept the option or the gcc specs file needs to be changed.
The patch also make gold detect --bss-plt code and error out rather
than producing a binary that crashes.
* options.h: Add --secure-plt option.
* powerpc.cc (Target_powerpc::Scan::local): Detect and error
on -fPIC -mbss-plt code.
(Target_powerpc::Scan::global): Likewise.
GDB Administrator [Tue, 10 Jan 2017 00:00:22 +0000 (00:00 +0000)]
Automatic date update in version.in
Jim Wilson [Mon, 9 Jan 2017 23:44:57 +0000 (15:44 -0800)]
Fix problems with the implementation of the uzp1 and uzp2 instructions.
sim/aarch64/
* simulator.c (do_vec_UZP): Rewrite.
sim/testsuite/sim/aarch64/
* uzp.s: New.
Antoine Tremblay [Mon, 9 Jan 2017 17:39:07 +0000 (12:39 -0500)]
Fix inferior memory reading in GDBServer for arm/aarch32
Before this patch, some functions would read the inferior memory with
(*the_target)->read_memory, which returns the raw memory, rather than the
shadowed memory.
This is wrong since these functions do not expect to read a breakpoint
instruction and can lead to invalid behavior.
Use of raw memory in get_next_pcs_read_memory_unsigned_integer for example
could lead to get_next_pc returning an invalid pc.
Here's how this would happen:
In non-stop:
the user issues:
thread 1
step&
thread 2
step&
thread 3
step&
In a similar way as non-stop-fair-events.exp (threads are looping).
GDBServer:
linux_resume is called
GDBServer has pending events,
threads are not resumed and single-step breakpoint for thread 1 not installed.
linux_wait_1 is called with a pending event on thread 2 at pc A
GDBServer handles the event and calls proceed_all_lwps
This calls proceed_one_lwp and installs single-step breakpoints on all
the threads that need one.
Now since thread 1 needs to install a single-step breakpoint and is at pc B
(different than thread 2), a step-over is not initiated and get_next_pc
is called to figure out the next instruction from pc B.
However it may just be that thread 3 as a single step breakpoint at pc
B. And thus get_next_pc fails.
This situation is tested with non-stop-fair-events.exp.
In other words, single-step breakpoints are installed in proceed_one_lwp
for each thread. GDBserver proceeds two threads for resume_step, as
requested by GDB, and the thread proceeded later may see the single-step
breakpoints installed for the thread proceeded just now.
Tested on gdbserver-native/-m{thumb,arm} no regressions.
gdb/gdbserver/ChangeLog:
* linux-aarch32-low.c (arm_breakpoint_kind_from_pc): Use
target_read_memory.
* linux-arm-low.c (get_next_pcs_read_memory_unsigned_integer): Likewise.
(get_next_pcs_syscall_next_pc): Likewise.
Andrew Waterman [Thu, 22 Dec 2016 02:05:28 +0000 (18:05 -0800)]
RISC-V/GAS: Support more relocs against constant addresses
Previously, some pseudoinstructions like "call" only accepted
symbolic addresses and rejected constant addresses with an
esoteric internal error. This patch enables them by deferring
application of constant relocations to md_apply_fix, rather than
eagerly applying them during instruction assembly.
gas/ChangeLog
2017-01-09 Andrew Waterman <andrew@sifive.com>
* config/tc-riscv.c (append_insn): Don't eagerly apply relocations
against constants.
(md_apply_fix): Mark relocations against constants as "done."
Andrew Waterman [Wed, 21 Dec 2016 20:47:13 +0000 (12:47 -0800)]
RISC-V/GAS: Improve handling of invalid relocs
TLS relocs against constants previously segfaulted, and illegal
symbol subtractions were silently ignored.
The previous behavior was to segfault.
gas/ChangeLog
2017-01-09 Andrew Waterman <andrew@sifive.com>
* config/tc-riscv.c (md_apply_fix): Report TLS relocations against
constants. Report disallowed symbol subtractions.
Palmer Dabbelt [Fri, 30 Dec 2016 01:29:53 +0000 (17:29 -0800)]
Remove some custom sections from RISC-V's default linker scripts
This was added so compressed loads could have smaller offsets for
accessing the data section, but the result was that writable sections
ended up in INITIAL_READONLY_SECTIONS. This is a bad idea. The fix is
to just remove this micro-optimization.
Thanks to Alan Morda for finding the problem!
ld/ChangeLog
2017-01-09 Palmer Dabbelt <palmer@dabbelt.com>
Kito Cheng <kito.cheng@gmail.com>
* emulparams/elf32lriscv-defs.sh (INITIAL_READONLY_SECTIONS):
Removed.
(SDATA_START_SYMBOLS): Likewise.
Nick Clifton [Mon, 9 Jan 2017 16:49:48 +0000 (16:49 +0000)]
Speed up objdump when displaying disassembly mixed with line number and source code information.
bfd * dwarf2.c (lookup_address_in_function_table): Return early if
there are no functions in the given comp unit, or if the high
address of the last function in the comp unit is less than the
desired address.
binutils * objdump.c (display_file): Add new parameter 'last_file'. If
last_file is true, do not call bfd_close at the end of the
function.
(main): Set the value of the last_file parameter when calling
display_file.
Nick Clifton [Mon, 9 Jan 2017 10:11:50 +0000 (10:11 +0000)]
Add Swedish translation for GAS.
* po/sv.po: New Swedish translation.
* configure.ac (ALL_LINGUAS): Add sv.
* configure: Regenerate.
Nick Clifton [Mon, 9 Jan 2017 09:27:46 +0000 (09:27 +0000)]
Improve objdump's behaviour when it encounters a corrupt binary with an excessively large symbol table.
PR binutils/21013
* coffgen.c (_bfd_coff_get_external_symbols): Generate an error
message if there are too many symbols to load.
Andrew Waterman [Mon, 9 Jan 2017 09:22:33 +0000 (09:22 +0000)]
RISC-V/GAS: Correct branch relaxation for weak symbols.
* config/tc-riscv.c (relaxed_branch_length): Use the long
sequence when the target is a weak symbol.
Alan Modra [Mon, 9 Jan 2017 00:16:23 +0000 (10:46 +1030)]
[GOLD] Set sh_info of .rela.plt for powerpc
* powerpc.cc (Target_powerpc::make_plt_section): Point sh_info of
".rela.plt" at ".plt".
Alan Modra [Mon, 9 Jan 2017 01:38:00 +0000 (12:08 +1030)]
.rela.dyn comment fix and add missing ChangeLog entry
ChangeLog entry missed from commit
dd90581873.
* readelf.c (process_section_headers): Correct .rel.dyn/.rela.dyn
comment.
GDB Administrator [Mon, 9 Jan 2017 00:00:20 +0000 (00:00 +0000)]
Automatic date update in version.in
Iain Buclaw [Sun, 8 Jan 2017 10:17:54 +0000 (11:17 +0100)]
[D] Fix crash when debug expression enabled.
While casting works as expected with expression debugging turned off,
this seems to be an indication that the D language parser function is
doing something wrong in the building of the expression.
Without changing the grammar, using UNOP_CAST_TYPE is the right thing to
do here, as the TypeExp handler has already wrapped the type around a
pair of OP_TYPE opcodes.
gdb/ChangeLog:
* d-exp.y (CastExpression): Emit UNOP_CAST_TYPE.
gdb/testsuite/ChangeLog:
* gdb.dlang/debug-expr.exp: New file.
GDB Administrator [Sun, 8 Jan 2017 00:00:24 +0000 (00:00 +0000)]
Automatic date update in version.in
Andreas Krebbel [Thu, 5 Jan 2017 18:53:14 +0000 (19:53 +0100)]
S/390: Issue error for overflowing relocs.
Building PIE executable from non-PIC code results in broken binaries.
With this patch the problem is detected at link-time.
bfd/ChangeLog:
2017-01-07 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* elf64-s390.c (elf_s390_relocate_section): Issue error for
non-PLT relocs of shared libary symbol in exectuable.
Alan Modra [Fri, 6 Jan 2017 05:17:33 +0000 (15:47 +1030)]
[GOLD] powerpc.cc tidies
Plus some paranoia in symval_for_branch. We shouldn't get there with
dynamic symbols, but if we ever did the static_cast to Powerpc_relobj
would be wrong.
* powerpc.cc: Use shorter equivalent elfcpp typedef for
Reltype and reloc_size throughout.
(Target_powerpc::symval_for_branch): Exclude dynamic symbols.
(Target_powerpc::Scan::local): Use local var r_sym.
(Target_powerpc::Scan::global: Likewise.
(Target_powerpc::Relocate::relocate): Delete shadowing r_sym.
GDB Administrator [Sat, 7 Jan 2017 00:00:21 +0000 (00:00 +0000)]
Automatic date update in version.in
Yao Qi [Fri, 6 Jan 2017 14:33:01 +0000 (14:33 +0000)]
Include gdb_proc_service.h in x86-linux-nat.h
$ make check-headers CHECK_HEADERS="x86-linux-nat.h"
...
../../binutils-gdb/gdb/x86-linux-nat.h:29:8: error: 'ps_err_e' does not name a type
extern ps_err_e x86_linux_get_thread_area (pid_t pid, void *addr,
^
gdb:
2017-01-06 Yao Qi <yao.qi@linaro.org>
* x86-linux-nat.h: Include gdb_proc_service.h.
Yao Qi [Fri, 6 Jan 2017 14:33:01 +0000 (14:33 +0000)]
Include serial.h in ser-base.h.
$ make check-headers CHECK_HEADERS="ser-base.h"
...
../../binutils-gdb/gdb/ser-base.h:33:8: error: 'serial_ttystate' does not name a type
extern serial_ttystate ser_base_get_tty_state (struct serial *scb);
^
gdb:
2017-01-06 Yao Qi <yao.qi@linaro.org>
* ser-base.h: Include serial.h.
Yao Qi [Fri, 6 Jan 2017 14:33:01 +0000 (14:33 +0000)]
Include ppc-tdep.h in ppc-linux-tdep.h
$ make check-headers CHECK_HEADERS="ppc-linux-tdep.h"
...
../../binutils-gdb/gdb/ppc-linux-tdep.h:34:24: error: 'PPC_NUM_REGS' was not declared in this scope
PPC_ORIG_R3_REGNUM = PPC_NUM_REGS,
^
gdb:
2017-01-06 Yao Qi <yao.qi@linaro.org>
* ppc-linux-tdep.h: Include ppc-tdep.h.
Yao Qi [Fri, 6 Jan 2017 14:33:01 +0000 (14:33 +0000)]
Include signal.h in nat/amd64-linux-siginfo.h
$ make check-headers CHECK_HEADERS="nat/amd64-linux-siginfo.h"
....
../../binutils-gdb/gdb/nat/amd64-linux-siginfo.h:52:39: error: 'siginfo_t' was not declared in this scope
int amd64_linux_siginfo_fixup_common (siginfo_t *native, gdb_byte *inf,
^
gdb:
2017-01-06 Yao Qi <yao.qi@linaro.org>
* nat/amd64-linux-siginfo.h: Include signal.h.
Yao Qi [Fri, 6 Jan 2017 14:33:01 +0000 (14:33 +0000)]
Include break-common.h in nat/aarch64-linux-hw-point.h
$ make check-headers CHECK_HEADERS="nat/aarch64-linux-hw-point.h"
...
../../binutils-gdb/gdb/nat/aarch64-linux-hw-point.h:169:37: error: use of enum 'target_hw_bp_type' without previous declaration
int aarch64_handle_breakpoint (enum target_hw_bp_type type, CORE_ADDR addr,
^
gdb:
2017-01-06 Yao Qi <yao.qi@linaro.org>
* nat/aarch64-linux-hw-point.h: Include break-common.h.
Yao Qi [Fri, 6 Jan 2017 14:33:00 +0000 (14:33 +0000)]
Include mi-cmds.h in mi-parse.h
$ make check-headers CHECK_HEADERS="mi/mi-parse.h"
...
../../binutils-gdb/gdb/mi/mi-parse.h:77:6: error: use of enum 'print_values' without previous declaration
enum print_values mi_parse_print_values (const char *name);
^
gdb:
2017-01-06 Yao Qi <yao.qi@linaro.org>
* mi/mi-parse.h: Include mi-cmds.h.
Yao Qi [Fri, 6 Jan 2017 14:26:45 +0000 (14:26 +0000)]
Include target.h in inf-loop.h
$ make check-headers CHECK_HEADERS="target.h inf-loop.h"
...
../../binutils-gdb/gdb/inf-loop.h:23:42: error: use of enum 'inferior_event_type' without previous declaration
extern void inferior_event_handler (enum inferior_event_type event_type,
^
gdb:
2017-01-06 Yao Qi <yao.qi@linaro.org>
* inf-loop.c: Don't include "target.h".
* inf-loop.h: Include it here.
Yao Qi [Fri, 6 Jan 2017 14:26:45 +0000 (14:26 +0000)]
Include doublest.h and expression.h in dfp.h
$ make check-headers CHECK_HEADERS="dfp.h"
...
../../binutils-gdb/gdb/dfp.h:39:8: error: 'DOUBLEST' does not name a type
extern DOUBLEST decimal_to_doublest (const gdb_byte *from, int len,
^
../../binutils-gdb/gdb/dfp.h:41:33: error: use of enum 'exp_opcode' without previous declaration
extern void decimal_binop (enum exp_opcode,
^
gdb:
2017-01-06 Yao Qi <yao.qi@linaro.org>
* dfp.h: Include "dboulest.h" and "expression.h".
Yao Qi [Fri, 6 Jan 2017 14:26:45 +0000 (14:26 +0000)]
Include ax.h in ax-gdb.h
$ make check-headers CHECK_HEADERS="ax-gdb.h"
...
../../binutils-gdb/gdb/ax-gdb.h:104:8: error: 'agent_expr_up' does not name a type
extern agent_expr_up gen_trace_for_expr (CORE_ADDR, struct expression *,
^
gdb:
2017-01-06 Yao Qi <yao.qi@linaro.org>
* ax-gdb.h: Include "ax.h"
Yao Qi [Fri, 6 Jan 2017 14:03:02 +0000 (14:03 +0000)]
Update gdb_ptrace.h in HFILES_NO_SRCDIR
Commit e379037 (Move gdb_ptrace.h to nat/), so we should update
file name in HFILES_NO_SRCDIR too. Otherwise, 'make tags' complains,
$ make tags
make: *** No rule to make target `gdb_ptrace.h', needed by `TAGS'. Stop.
gdb:
2017-01-06 Yao Qi <yao.qi@linaro.org>
* Makefile.in (HFILES_NO_SRCDIR): Replace gdb_ptrace.h
with nat/gdb_ptrace.h.
Nick Clifton [Fri, 6 Jan 2017 12:24:54 +0000 (12:24 +0000)]
Retire Paul Brook as an ARM maintainer.
* MAINTAINERS: Move Paul Brook to the Past Maintainers section.
GDB Administrator [Fri, 6 Jan 2017 00:00:25 +0000 (00:00 +0000)]
Automatic date update in version.in