drm/rockchip: dsi: Remove the unused function dsi_read()

The function dsi_read is defined in the dw-mipi-dsi-rockchip.c file, but
not called elsewhere, so remove this unused function.

drivers/gpu/drm/rockchip/dw-mipi-dsi-rockchip.c:362:19: warning: unused function 'dsi_read'.

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=3984
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230208023429.73696-1-jiapeng.chong@linux.alibaba.com

drm/nouveau/hwmon: Use sysfs_emit in show function callsbacks

According to Documentation/filesystems/sysfs.rst, the show() callback
function of kobject attributes should strictly use sysfs_emit() instead
of sprintf() family functions. So, make this change.
Issue identified using the coccinelle device_attr_show.cocci script.

Signed-off-by: Deepak R Varma <drv@mailo.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Y/+pDaHOgG1x8Py2@ubun2204.myguest.virtualbox.org

drm/virtio: Fix handling CONFIG_DRM_VIRTIO_GPU_KMS option

VirtIO-GPU got a new config option for disabling KMS. There were two
problems left unnoticed during review when the new option was added:

1. The IS_ENABLED(CONFIG_DRM_VIRTIO_GPU_KMS) check in the code was
inverted, hence KMS was disabled when it should be enabled and vice versa.

2. The disabled KMS crashed kernel with a NULL dereference in
drm_kms_helper_hotplug_event(), which shall not be invoked with a
disabled KMS.

Fix the inverted config option check in the code and skip handling the
VIRTIO_GPU_EVENT_DISPLAY sent by host when KMS is disabled in guest to fix
the crash.

Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Fixes: 72122c69d717 ("drm/virtio: Add option to disable KMS support")
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230306163916.1595961-1-dmitry.osipenko@collabora.com

drm/meson/meson_venc: Relax the supported mode checks

Relax a bit the supported modes list by including also 480x1920 and
400x1280. This was actually tested on real hardware and it works
correctly.

Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230210-relax_dmt_limits-v2-1-318913f08121@baylibre.com

drm: remove outdated doc TODO for subconnector property

This is already documented under "standard connector properties".

Signed-off-by: Simon Ser <contact@emersion.fr>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Pekka Paalanen <ppaalanen@gmail.com>
Cc: Noralf Trønnes <noralf@tronnes.org>
Cc: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Acked-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20230227122522.117580-1-contact@emersion.fr

drm: document connector margin properties

Add docs for "{left,right,top,bottom} margin" properties.

v2:
- Mention the purpose: mitigate underscan on TVs
- Move out of analog TV section into standard props (Pekka)
- Mention HDMI AVI InfoFrames (Pekka, Ville)

Signed-off-by: Simon Ser <contact@emersion.fr>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Noralf Trønnes <noralf@tronnes.org>
Cc: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Acked-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230228123156.175973-1-contact@emersion.fr

drm/virtio: Add option to disable KMS support

Add a build option to disable modesetting support.  This is useful in
cases where the guest only needs to use the GPU in a headless mode, or
(such as in the CrOS usage) window surfaces are proxied to a host
compositor.

As the modesetting ioctls are a big surface area for potential security
bugs to be found (it's happened in the past, we should assume it will
again in the future), it makes sense to have a build option to disable
those ioctls in cases where they serve no legitimate purpose.

v2: Use more if (IS_ENABLED(...))
v3: Also permit the host to advertise no scanouts
v4: Spiff out commit msg
v5: Make num_scanouts==0 and DRM_VIRTIO_GPU_KMS=n behave the same
v6: Drop conditionally building virtgpu_display.c and early-out of
    it's init/fini fxns instead

Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230302233506.3146290-1-robdclark@gmail.com

dma-buf: Include missing parentheses to documentation

The missing parentheses prevents the function to be rendered as a link
in the documentation. So, add the missing parentheses to the function on
the documentation.

Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Maíra Canal <mairacanal@riseup.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20230223121909.149980-1-mcanal@igalia.com

ttm/ttm_device.h: fix a trival typo

should replace '@' with '*'

Signed-off-by: suijingfeng <suijingfeng@loongson.cn>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230303101216.788971-1-15330273260@189.cn

drm/bridge: tc358762: Set pre_enable_prev_first

Set the "pre_enable_prev_first" as provided by commit 4fb912e5e190
("drm/bridge: Introduce pre_enable_prev_first to alter bridge init
order"). This should allow us to revert commit ec7981e6c614
("drm/msm/dsi: don't powerup at modeset time for parade-ps8640") and
commit 7d8e9a90509f ("drm/msm/dsi: move DSI host powerup to modeset
time").

Cc: Dave Stevenson <dave.stevenson@raspberrypi.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230131141756.RFT.v2.1.I723a3761d57ea60c5dd754c144aed6c3b2ea6f5a@changeid

MAINTAINERS: Add myself as maintainer for DRM Panels drivers

Add myself as co-maintainer for DRM Panel Drivers in order to help
reviewing and getting new panels drivers merged, and Remove Thierry
as he suggested since he wasn't active for a while.

Thanks Thierry for all your work!

Acked-by: Jagan Teki <jagan@amarulasolutions.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230216-topic-drm-panel-upstream-maintainance-v2-1-ffd262b72f16@linaro.org

drm/radeon: Use the drm suballocation manager implementation.

Use the generic suballocation helper for radeon.

v3:
- Select the suballoc helper in Kconfig (Thomas).

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Co-developed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230224095152.30134-4-thomas.hellstrom@linux.intel.com

drm/amd: Convert amdgpu to use suballocation helper.

Now that we have a generic suballocation helper, Use it in amdgpu.
For lines that get moved or changed, also fix up pre-existing style issues.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Co-developed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230224095152.30134-3-thomas.hellstrom@linux.intel.com

drm/suballoc: Extract amdgpu_sa.c as generic suballocation helper

Suballocating a buffer object is something that is not driver-specific
and useful for many drivers.

Use a slightly modified version of amdgpu_sa.c

v2:
- Style cleanups.
- Added / Modified documentation.
- Use u64 for the sizes and offset. The code dates back to 2012 and
  using unsigned int will probably soon come back to bite us.
  We can consider size_t as well for better 32-bit efficiency.
- Add and document gfp, intr and align arguments to drm_suballoc_new().
- Use drm_printer for debug output.

v3:
- Remove stale author info (Christian König)

v4:
- Avoid 64-bit integer divisions (kernel test robot <lkp@intel.com>)
- Use size_t rather than u64 for the managed range. (Thomas)

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Co-developed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: Alex Deucher <alexdeucher@gmail.com>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230224095152.30134-2-thomas.hellstrom@linux.intel.com

drm/edid: Fix csync detailed mode parsing

Remove the bogus csync check and replace it with something that:
- triggers for all forms of csync, not just the basic analog variant
- actually populates the mode csync flags so that drivers can
  decide what to do with the mode

Originally the code tried to outright reject csync, but that
apparently broke some bogus LCD monitor that claimed to have
a detailed mode that uses analog csync, despite also claiming
the monitor only support separate sync:
https://bugzilla.redhat.com/show_bug.cgi?id=540024
Potentially that monitor should just be quirked or something.

Anyways, what we are dealing with now is some kind of funny i915
JSL machine with eDP where the panel claims to support a sensible
60Hz separate sync mode, and a 50Hz mode with bipolar analog
csync. The 50Hz mode does not work so we want to not use it.
Easiest way is to just correctly flag it as csync and the driver
will reject it.

TODO: or should we just reject any form of csync (or at least
the analog variants) for digital display interfaces?

v2: Grab digital csync polarity from hsync polarity bit (Jani)

Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/8146
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230228213610.26283-1-ville.syrjala@linux.intel.com

drm/ast: Rename to_ast_private() to to_ast_device()

The helper to_ast_private() now upcasts to struct ast_device. Rename
it accordingly. No functional changes.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230221155745.27484-5-tzimmermann@suse.de

drm/ast: Rename struct ast_private to struct ast_device

The data structure struct ast_private represents an AST device. Its
name comes from the time when it was allocated and stored separately
in struct drm_device.dev_private. The DRM device is now embedded, so
rename struct ast_private to struct ast_device.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230221155745.27484-4-tzimmermann@suse.de

drm/ast: Rework definition of I/O read and write helpers

Ast defines a number of I/O helpers for accessing hardware. Only 4 of
the many generated functions are actually used. Replace the respective
generator macros with those 4 functions. No functional changes.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230221155745.27484-3-tzimmermann@suse.de

drm/ast: Remove little-endianism from I/O helpers

Replace one call to ast_io_write16() with two calls to ast_io_write8()
in ast_set_index_reg(). The combined 16-bit-wide write of an index
register and the corresponding data register only works on little-
endian systems. Write both registers independent from each other.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230221155745.27484-2-tzimmermann@suse.de

drm/vc4: replace obj lookup steps with drm_gem_objects_lookup

As vc4_cl_lookup_bos() performs the same steps as drm_gem_objects_lookup(),
replace the open-coded implementation in vc4 to simply use the DRM function.

Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: André Almeida <andrealmeid@igalia.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Maíra Canal <mairacanal@riseup.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20230202111943.111757-3-mcanal@igalia.com

drm/vc4: replace drm_gem_dma_object for drm_gem_object in vc4_exec_info

The array of BOs that are lookup at the start of exec doesn't need
to be instantiated as drm_gem_dma_object, as it doesn't benefit
from its attributes. So, simplify the code by replacing the array of
drm_gem_dma_object for an array of drm_gem_object in the struct
vc4_exec_info.

Suggested-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: André Almeida <andrealmeid@igalia.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Maíra Canal <mairacanal@riseup.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20230202111943.111757-2-mcanal@igalia.com

Revert "drm/shmem-helper: Switch to reservation lock"

This reverts commit 67b7836d4458790f1261e31fe0ce3250989784f0.

The locking appears incomplete. A caller of SHMEM helper's pin
function never acquires the dma-buf reservation lock. So we get

  WARNING: CPU: 3 PID: 967 at drivers/gpu/drm/drm_gem_shmem_helper.c:243 drm_gem_shmem_pin+0x42/0x90 [drm_shmem_helper]

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230228152612.19971-1-tzimmermann@suse.de

drm/connector: print max_requested_bpc in state debugfs

This is useful to understand the bpc defaults and
support of a driver.

Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Cc: Pekka Paalanen <ppaalanen@gmail.com>
Cc: Sebastian Wick <sebastian.wick@redhat.com>
Cc: Vitaly.Prosyak@amd.com
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Joshua Ashton <joshua@froggi.es>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: dri-devel@lists.freedesktop.org
Cc: amd-gfx@lists.freedesktop.org
Reviewed-By: Joshua Ashton <joshua@froggi.es>
Link: https://patchwork.freedesktop.org/patch/msgid/20230113162428.33874-3-harry.wentland@amd.com

drm/display: Don't block HDR_OUTPUT_METADATA on unknown EOTF

The EDID of an HDR display defines EOTFs that are supported
by the display and can be set in the HDR metadata infoframe.
Userspace is expected to read the EDID and set an appropriate
HDR_OUTPUT_METADATA.

In drm_parse_hdr_metadata_block the kernel reads the supported
EOTFs from the EDID and stores them in the
drm_connector->hdr_sink_metadata. While doing so it also
filters the EOTFs to the EOTFs the kernel knows about.
When an HDR_OUTPUT_METADATA is set it then checks to
make sure the EOTF is a supported EOTF. In cases where
the kernel doesn't know about a new EOTF this check will
fail, even if the EDID advertises support.

Since it is expected that userspace reads the EDID to understand
what the display supports it doesn't make sense for DRM to block
an HDR_OUTPUT_METADATA if it contains an EOTF the kernel doesn't
understand.

This comes with the added benefit of future-proofing metadata
support. If the spec defines a new EOTF there is no need to
update DRM and an compositor can immediately make use of it.

Bug: https://gitlab.freedesktop.org/wayland/weston/-/issues/609

v2: Distinguish EOTFs defind in kernel and ones defined
    in EDID in the commit description (Pekka)

v3: Rebase; drm_hdmi_infoframe_set_hdr_metadata moved
    to drm_hdmi_helper.c

Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Cc: Pekka Paalanen <ppaalanen@gmail.com>
Cc: Sebastian Wick <sebastian.wick@redhat.com>
Cc: Vitaly.Prosyak@amd.com
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Joshua Ashton <joshua@froggi.es>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: dri-devel@lists.freedesktop.org
Cc: amd-gfx@lists.freedesktop.org
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Reviewed-By: Joshua Ashton <joshua@froggi.es>
Link: https://patchwork.freedesktop.org/patch/msgid/20230113162428.33874-2-harry.wentland@amd.com

drm/probe-helper: Cancel previous job before starting new one

Currently we schedule a call to output_poll_execute from
drm_kms_helper_poll_enable for 10s in future. Later we try to replace
that in drm_helper_probe_single_connector_modes with a 0s schedule with
delayed_event set.

But as there is already a job in the queue this fails, and the immediate
job we wanted with delayed_event set doesn't occur until 10s later.

And that call acts as if connector state has changed, reprobing modes.
This has a side effect of waking up a display that has been blanked.

Make sure we cancel the old job before submitting the immediate one.

Fixes: 162b6a57ac50 ("drm/probe-helper: don't lose hotplug event")
Acked-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Dom Cobley <popcornmix@gmail.com>
[Maxime: Switched to mod_delayed_work]
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20230127154052.452524-1-maxime@cerno.tech

drm/shmem-helper: Switch to reservation lock

Replace all drm-shmem locks with a GEM reservation lock. This makes locks
consistent with dma-buf locking convention where importers are responsible
for holding reservation lock for all operations performed over dma-bufs,
preventing deadlock between dma-buf importers and exporters.

Suggested-by: Daniel Vetter <daniel@ffwll.ch>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://lore.kernel.org/all/20230108210445.3948344-8-dmitry.osipenko@collabora.com/

drm/shmem-helper: Don't use vmap_use_count for dma-bufs

DMA-buf core has its own refcounting of vmaps, use it instead of drm-shmem
counting. This change prepares drm-shmem for addition of memory shrinker
support where drm-shmem will use a single dma-buf reservation lock for
all operations performed over dma-bufs.

Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://lore.kernel.org/all/20230108210445.3948344-7-dmitry.osipenko@collabora.com/

drm/shmem-helper: Switch to use drm_* debug helpers

Ease debugging of a multi-GPU system by using drm_WARN_*() and
drm_dbg_kms() helpers that print out DRM device name corresponding
to shmem GEM.

Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Suggested-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://lore.kernel.org/all/20230108210445.3948344-6-dmitry.osipenko@collabora.com/

drm/shmem-helper: Put booleans in the end of struct drm_gem_shmem_object

Group all 1-bit boolean members of struct drm_gem_shmem_object in the end
of the structure, allowing compiler to pack data better and making code to
look more consistent.

Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Suggested-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://lore.kernel.org/all/20230108210445.3948344-5-dmitry.osipenko@collabora.com/

drm/gem: Add evict() callback to drm_gem_object_funcs

Add new common evict() callback to drm_gem_object_funcs and corresponding
drm_gem_object_evict() helper. This is a first step on a way to providing
common GEM-shrinker API for DRM drivers.

Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Suggested-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://lore.kernel.org/all/20230108210445.3948344-4-dmitry.osipenko@collabora.com/

drm/virtio: use strscpy() to instead of strncpy()

The implementation of strscpy() is more robust and safer.
That's now the recommended way to copy NUL terminated strings.

Signed-off-by: Xu Panda <xu.panda@zte.com.cn>
Signed-off-by: Yang Yang <yang.yang29@zte.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/202212070913161959936@zte.com.cn

drm/edid: parse Tiled Display Topology Data Block for DisplayID 2.0

Currently we only parse the Tiled Display Topology Data Block for
DisplayID structure version 1.2, but not 2.0. The contents seem to be
the same for both, so expand the parsing to structure version 2.0.

Note that DisplayID spec version is not the same as DisplayID structure
version; DisplayID 1.3 uses structure version 1.2, and DisplayID 2.0-2.1
use structure version 2.0. Lovely.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230217104627.1360015-1-jani.nikula@intel.com

drm/edid: update non-desktop use also from DisplayID

Use the DisplayID 2.0 primary use case information to deduce whether
this is a head-mounted display, and should not be used for desktop.

Cc: Iaroslav Boliukin <iam@lach.pw>
Cc: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> # HTC VIVE Pro 2
Reviewed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/de75b2edddd7d30216e4dd5699a064dc737688f5.1676580180.git.jani.nikula@intel.com

drm/displayid: provide access to DisplayID version and primary use case

The DisplayID structure version and primary use case are stored in the
DisplayID Base Section. We should be checking them in a number of places
when parsing the DisplayID blocks. Currently, we completely ignore the
primary use case, and just look at the block tags without cross-checking
against structure version.

Store the version and primary use case in the DisplayID iterator, and
provide accessors to them. In general, the information is needed when
iterating the blocks, and this is a convenient place to both store and
retrieve the information during parsing.

Promote using accessors rather than users poking at the iterator
directly.

Cc: Iaroslav Boliukin <iam@lach.pw>
Cc: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Reviewed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ad8a35c109f97ffe115e6b18e4a132b592f11089.1676580180.git.jani.nikula@intel.com

drm/displayid: return struct displayid_header from validate_displayid()

Avoid figuring out the header pointer multiple times.

Cc: Iaroslav Boliukin <iam@lach.pw>
Cc: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Reviewed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/e840c744d165608a41db5a5e2bd4b0205783c697.1676580180.git.jani.nikula@intel.com

drm/displayid: add displayid_get_header() and check bounds better

Add a helper to get a pointer to struct displayid_header. To be
pedantic, add buffer overflow checks to not touch the base if that
itself would overflow.

Cc: Iaroslav Boliukin <iam@lach.pw>
Cc: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Reviewed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/4a03b3a5132642d3cdb6d4c2641422955a917292.1676580180.git.jani.nikula@intel.com

drm/v3d: Use drm_sched_job_add_syncobj_dependency()

As v3d_job_add_deps() performs the same steps as
drm_sched_job_add_syncobj_dependency(), replace the open-coded
implementation in v3d in order to simply use the DRM function.

Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Maíra Canal <mairacanal@riseup.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20230209124447.467867-6-mcanal@igalia.com

drm/panfrost: Use drm_sched_job_add_syncobj_dependency()

As panfrost_copy_in_sync() performs the same steps as
drm_sched_job_add_syncobj_dependency(), replace the open-coded
implementation in Panfrost in order to simply use the DRM function.

Reviewed-by: Alyssa Rosenzweig <alyssa@collabora.com>
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Maíra Canal <mairacanal@riseup.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20230209124447.467867-5-mcanal@igalia.com

drm/sched: Create wrapper to add a syncobj dependency to job

In order to add a syncobj's fence as a dependency to a job, it is
necessary to call drm_syncobj_find_fence() to find the fence and then
add the dependency with drm_sched_job_add_dependency(). So, wrap these
steps in one single function, drm_sched_job_add_syncobj_dependency().

Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Signed-off-by: Maíra Canal <mairacanal@riseup.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20230209124447.467867-2-mcanal@igalia.com

drm/radeon: handle NULL bo->resource in move callback

The ttm bo now initially has NULL bo->resource, and leaves the driver
the handle that. However it looks like we forgot to handle that for
radeon.  It looks like this will just null-ptr-deref in
radeon_bo_move(), if bo->resource is NULL.

Fix this by calling move_null().

Fixes: 180253782038 ("drm/ttm: stop allocating dummy resources during BO creation")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230208145319.397235-4-matthew.auld@intel.com
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>

drm/qxl: handle NULL bo->resource in move callback

The ttm bo now initially has NULL bo->resource, and leaves the driver
the handle that. However it looks like we forgot to handle that for qxl.
It looks like this will just null-ptr-deref in qxl_bo_move(), if
bo->resource is NULL.

Fix this by calling move_null() if the new resource is TTM_PL_SYSTEM,
otherwise do the multi-hop sequence to ensure can safely call into
ttm_bo_move_memcpy(), since it might also need to clear the memory.
This should give the same behaviour as before.

Fixes: 180253782038 ("drm/ttm: stop allocating dummy resources during BO creation")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230208145319.397235-2-matthew.auld@intel.com
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>

drm/gem-vram: handle NULL bo->resource in move callback

The ttm BO now initially has NULL bo->resource, and leaves the driver
the handle that. However it looks like we forgot to handle that for
ttm_bo_move_memcpy() users, like with vram-gem, since it just silently
returns zero. This seems to then trigger warnings like:

WARNING: CPU: 0 PID: 1 at drivers/gpu/drm/drm_gem_vram_helper.c:255 drm_gem_vram_offset (??:?)

Fix this by calling move_null() if the new resource is TTM_PL_SYSTEM,
otherwise do the multi-hop sequence to ensure can safely call into
ttm_bo_move_memcpy(), since it might also need to clear the memory.
This should give the same behaviour as before.

While we are here let's also treat calling ttm_bo_move_memcpy() with
NULL bo->resource as programmer error, where expectation is that upper
layers should now handle it.

Fixes: 180253782038 ("drm/ttm: stop allocating dummy resources during BO creation")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230208145319.397235-1-matthew.auld@intel.com
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>

drm/nouveau/kms/nv50: fix nv50_wndw_new_ prototype

gcc-13 warns about mismatching types for enums. That revealed switched
arguments of nv50_wndw_new_():
  drivers/gpu/drm/nouveau/dispnv50/wndw.c:696:1: error: conflicting types for 'nv50_wndw_new_' due to enum/integer mismatch; have 'int(const struct nv50_wndw_func *, struct drm_device *, enum drm_plane_type,  const char *, int,  const u32 *, u32,  enum nv50_disp_interlock_type,  u32,  struct nv50_wndw **)'
  drivers/gpu/drm/nouveau/dispnv50/wndw.h:36:5: note: previous declaration of 'nv50_wndw_new_' with type 'int(const struct nv50_wndw_func *, struct drm_device *, enum drm_plane_type,  const char *, int,  const u32 *, enum nv50_disp_interlock_type,  u32,  u32,  struct nv50_wndw **)'

It can be barely visible, but the declaration says about the parameters
in the middle:
  enum nv50_disp_interlock_type,
  u32 interlock_data,
  u32 heads,

While the definition states differently:
  u32 heads,
  enum nv50_disp_interlock_type interlock_type,
  u32 interlock_data,

Unify/fix the declaration to match the definition.

Fixes: 53e0a3e70de6 ("drm/nouveau/kms/nv50-: simplify tracking of channel interlocks")
Cc: Martin Liska <mliska@suse.cz>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Karol Herbst <kherbst@redhat.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Cc: nouveau@lists.freedesktop.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221031114229.10289-1-jirislaby@kernel.org

drm/tidss: Implement struct drm_plane_helper_funcs.atomic_enable

Enable the primary plane for tidss hardware via atomic_enable.
Atomic helpers invoke this callback only when the plane becomes
active.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230209154107.30680-7-tzimmermann@suse.de

drm/tidss: Remove return values from dispc_plane_{setup, enable}()

Calls to dispc_plane_setup() and dispc_plane_enable() cannot fail.
Remove the return value.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230209154107.30680-6-tzimmermann@suse.de

drm/mgag200: Implement struct drm_plane_helper_funcs.atomic_enable

Enable the primary plane for mgag200 hardware via atomic_enable.
Atomic helpers invoke this callback only when the plane becomes
active.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230209154107.30680-5-tzimmermann@suse.de

drm/mgag200: Remove disable handling from atomic_update

The primary plane has the atomic_disable helper set, so atomic_update
won't be called if the plane gets disabled. Remove the respective branch
from the helper.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230209154107.30680-4-tzimmermann@suse.de

drm/ast: Implement struct drm_plane_helper_funcs.atomic_enable

Enable the primary plane for ast hardware via atomic_enable. Atomic
helpers invoke this callback only when the plane becomes active.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230209154107.30680-3-tzimmermann@suse.de

drm/atomic-helper: Add atomic_enable plane-helper callback

Add atomic_enable to struct drm_plane_helper_funcs. It enables a
plane independently from updating the plane's content. As such, it is
the inverse of the atomic_disable plane helper. Useful for hardware
where plane enable state is independent from plane content.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230209154107.30680-2-tzimmermann@suse.de

drm: Fix comment on mode parsing

Do not claim that there's a default mode in the video= option parser.
if no option string has been given, the parser does nothing.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230209135509.7786-12-tzimmermann@suse.de

drm: Include <video/cmdline.h> for mode parsing

Include <video/cmdline.h> in drm_connector.c to get video_get_options()
and avoid the dependency on <linux/fb.h>. The replaced function
fb_get_options() is just a tiny wrapper around video_get_opions(). No
functional changes.

Include <linux/property.h> to get fwnode_handle_put(), which had been
provided via <linux/fb.h>.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230209135509.7786-11-tzimmermann@suse.de

driver/ps3: Include <video/cmdline.h> for mode parsing

Include <video/cmdline.h> in ps3av.c to get video_get_options() and
avoid the dependency on <linux/fb.h>. The replaced function
fb_get_options() is just a tiny wrapper around video_get_opions(). No
functional changes.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230209135509.7786-10-tzimmermann@suse.de

fbdev: Handle video= parameter in video/cmdline.c

Handle the command-line parameter video= in video/cmdline.c. Implement
the fbdev helper fb_get_options() on top. Will allows to handle the
kernel parameter in DRM without fbdev dependencies.

Note that __video_get_options() has the meaning of its return value
inverted compared to fb_get_options(). The new helper returns true if
the adapter has been enabled, and false otherwise.

There is the ofonly parameter, which disables output for non-OF-based
framebuffers. It is only for offb and looks like a workaround. The actual
purpose it not clear to me. Use 'video=off' or 'nomodeset' instead.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230209135509.7786-9-tzimmermann@suse.de

fbdev: Move option-string lookup into helper

Move the lookup of the option string into an internal helper. No
functional changes.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230209135509.7786-8-tzimmermann@suse.de

fbdev: Unexport fb_mode_option

There are no external users of fb_mode_option. Unexport the variable
and declare it static.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230209135509.7786-7-tzimmermann@suse.de

fbdev: Read video= option with fb_get_option() in modedb

Get the kernel's global video= parameter with fb_get_option(). Done
to unexport the internal fbdev state fb_mode_config. No functional
changes.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230209135509.7786-6-tzimmermann@suse.de

drivers/ps3: Read video= option with fb_get_option()

Get the kernel's global video= parameter with fb_get_option(). Done
to unexport the internal fbdev state fb_mode_config. No functional
changes.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Geoff Levand <geoff@infradead.org>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230209135509.7786-5-tzimmermann@suse.de

fbdev: Support NULL for name in option-string lookup

Ignore the per-driver video options if no driver name has been
specified to fb_get_option(). Return the global options in this
case.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230209135509.7786-4-tzimmermann@suse.de

fbdev: Transfer video= option strings to caller; clarify ownership

In fb_get_options(), always duplicate the returned option string and
transfer ownership of the memory to the function's caller.

Until now, only the global option string got duplicated and transferred
to the caller; the per-driver options were owned by fb_get_options().
In the end, it was impossible for the function's caller to detect if
it had to release the string's memory buffer. Hence, all calling drivers
leak the memory buffer. The leaks have existed ever since, but drivers
only call fb_get_option() once as part of module initialization. So the
amount of leaked memory is not significant.

Fix the semantics of fb_get_option() by unconditionally transferring
ownership of the memory buffer to the caller. Later patches can resolve
the memory leaks in the fbdev drivers.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230209135509.7786-3-tzimmermann@suse.de

fbdev: Fix contact info in fb_cmdline.c

Fix Daniel's email address. No functional changes.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230209135509.7786-2-tzimmermann@suse.de

drm: document DRM_IOCTL_PRIME_HANDLE_TO_FD and PRIME_FD_TO_HANDLE

v2: mention caps, note that the IOCTLs might fail, document that
user-space needs a data structure to keep track of the
handles (Daniel V.)

Signed-off-by: Simon Ser <contact@emersion.fr>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Pekka Paalanen <ppaalanen@gmail.com>
Cc: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230217162151.59996-2-contact@emersion.fr

drm: document expectations for GETFB2 handles

There are two important details missing from the docs:

- If the memory object backing the FB already has a GEM handle,
  it's not re-used, a new one is generated.
- Aliased planes will return the same GEM handle.

v2: document how user-space can obtain DMA-BUF FDs without leaking
handles (Pekka)

Signed-off-by: Simon Ser <contact@emersion.fr>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Pekka Paalanen <ppaalanen@gmail.com>
Cc: Daniel Stone <daniel@fooishbar.org>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20230217162151.59996-1-contact@emersion.fr

dma-buf: make kobj_type structure constant

Since commit ee6d3dd4ed48 ("driver core: make kobj_type constant.")
the driver core allows the usage of const struct kobj_type.

Take advantage of this to constify the structure definition to prevent
modification at runtime.

Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230217-kobj_type-dma-buf-v1-1-b84a3616522c@weissschuh.net

drm: document DRM_IOCTL_GEM_CLOSE

This is a bit tricky, because of the ref'counting considerations.
See also [1] for more discussion about this topic. Since this is
kernel docs, I've decided to elaborate a bit less on the user-space
details.

[1]: https://gitlab.freedesktop.org/mesa/drm/-/merge_requests/110

Signed-off-by: Simon Ser <contact@emersion.fr>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Pekka Paalanen <ppaalanen@gmail.com>
Cc: Daniel Stone <daniel@fooishbar.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230216130934.156541-2-contact@emersion.fr

Revert "drm/vc4: hdmi: Enforce the minimum rate at runtime_resume"

This reverts commit ae71ab585c819f83aec84f91eb01157a90552ef2.

Commit ae71ab585c81 ("drm/vc4: hdmi: Enforce the minimum rate at
runtime_resume") was introduced to work around an issue partly due to
the clk-bcm2835 driver on the RaspberryPi0-3.

Since we're not using that driver for our HDMI clocks, we can now revert
it.

Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20230126-rpi-display-fw-clk-cleanup-v1-4-d646ff6fb842@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

Revert "drm/vc4: hdmi: Fix HSM clock too low on Pi4"

This reverts commit 3bc6a37f59f21a8bfaf74d0975b2eb0b2d52a065.

Commit 3bc6a37f59f2 ("drm/vc4: hdmi: Fix HSM clock too low on Pi4") was
introduced to work around an issue partly due to the clk-bcm2835 driver
on the RaspberryPi0-3.

Since we're not using that driver for our HDMI clocks, we can now revert
that inelegant solution.

Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20230126-rpi-display-fw-clk-cleanup-v1-3-d646ff6fb842@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

drm/vc4: hdmi: Enable power domain before setting minimum

On the RaspberryPi0-3, the HSM clock was provided by the clk-bcm2835
driver, but on the Pi4 it was provided by the firmware through the
clk-raspberrypi driver.

The clk-bcm2835 driver registers the HSM clock using the
CLK_SET_RATE_GATE flag that prevents any modification to the rate while
the clock is active.

This meant that we needed to call clk_set_min_rate() before our call to
pm_runtime_resume_and_get() since our runtime_resume implementation
needs to enable the HSM clock for the HDMI controller registers to be
functional.

However, the HSM clock is part of the HDMI power domain which might not
be powered prior to the pm_runtime_resume_and_get() call, so we could
end up changing the rate of the HSM clock while its power domain was
disabled.

We recently changed the backing driver for the RaspberryPi0-3 to
clk-raspberrypi though, which doesn't have such restrictions. We can
thus move the clk_set_min_rate() after our call to runtime_resume and
avoid the access while the power domain is disabled.

Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20230126-rpi-display-fw-clk-cleanup-v1-2-d646ff6fb842@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

drm/vc4: hdmi: Replace hardcoded value by define

The 120MHz value hardcoded in the call to max_t to compute the HSM rate
is defined in the driver as HSM_MIN_CLOCK_FREQ, let's switch to it so
that it's more readable.

Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20230126-rpi-display-fw-clk-cleanup-v1-1-d646ff6fb842@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

drm/nouveau/led: explicitly include linux/leds.h

Instead of relying on an accidental, transitive inclusion of linux/leds.h
use it directly.

Also drop the forware definition of struct led_classdev that is now
provided by linux/leds.h.

Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230215-power_supply-leds-nouveau-v1-1-ea93bfa0ba7e@weissschuh.net

drm/vmwgfx: Do not drop the reference to the handle too soon

v3: Fix vmw_user_bo_lookup which was also dropping the gem reference
before the kernel was done with buffer depending on userspace doing
the right thing. Same bug, different spot.

It is possible for userspace to predict the next buffer handle and
to destroy the buffer while it's still used by the kernel. Delay
dropping the internal reference on the buffers until kernel is done
with them.

Instead of immediately dropping the gem reference in vmw_user_bo_lookup
and vmw_gem_object_create_with_handle let the callers decide when they're
ready give the control back to userspace.

Also fixes the second usage of vmw_gem_object_create_with_handle in
vmwgfx_surface.c which wasn't grabbing an explicit reference
to the gem object which could have been destroyed by the userspace
on the owning surface at any point.

Signed-off-by: Zack Rusin <zackr@vmware.com>
Fixes: 8afa13a0583f ("drm/vmwgfx: Implement DRIVER_GEM")
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Reviewed-by: Maaz Mombasawala <mombasawalam@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230211050514.2431155-1-zack@kde.org

drm/vmwgfx: Stop accessing buffer objects which failed init

ttm_bo_init_reserved on failure puts the buffer object back which
causes it to be deleted, but kfree was still being called on the same
buffer in vmw_bo_create leading to a double free.

After the double free the vmw_gem_object_create_with_handle was
setting the gem function objects before checking the return status
of vmw_bo_create leading to null pointer access.

Fix the entire path by relaying on ttm_bo_init_reserved to delete the
buffer objects on failure and making sure the return status is checked
before setting the gem function objects on the buffer object.

Signed-off-by: Zack Rusin <zackr@vmware.com>
Fixes: 8afa13a0583f ("drm/vmwgfx: Implement DRIVER_GEM")
Reviewed-by: Maaz Mombasawala <mombasawalam@vmware.com>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230208180050.2093426-1-zack@kde.org

drm/vmwgfx: Make the driver work without the dummy resources

In commit 180253782038 ("drm/ttm: stop allocating dummy resources during BO creation")
ttm stopped allocating dummy resources but vmwgfx was never ported to
handle it. Make the driver treat null resources as initial creation and
port code to handle null resources in general.

Fixes kernel oops'es on boot with vmwgfx.

Signed-off-by: Zack Rusin <zackr@vmware.com>
Fixes: 180253782038 ("drm/ttm: stop allocating dummy resources during BO creation")
Cc: Christian König <christian.koenig@amd.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Nirmoy Das <nirmoy.das@intel.com>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Huang Rui <ray.huang@amd.com>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230210023437.2214816-1-zack@kde.org

drm/vmwgfx: Stop using raw ttm_buffer_object's

Various bits of the driver used raw ttm_buffer_object instead of the
driver specific vmw_bo object. All those places used to duplicate
the mapped bo caching policy of vmw_bo.

Instead of duplicating all of that code and special casing various
functions to work both with vmw_bo and raw ttm_buffer_object's unify
the buffer object handling code.

As part of that work fix the naming of bo's, e.g. insted of generic
backup use 'guest_memory' because that's what it really is.

All of it makes the driver easier to maintain and the code easier to
read. Saves 100+ loc as well.

Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Reviewed-by: Maaz Mombasawala <mombasawalam@vmware.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230131033542.953249-9-zack@kde.org

drm/vmwgfx: Abstract placement selection

Problem with explicit placement selection in vmwgfx is that by the time
the buffer object needs to be validated the information about which
placement was supposed to be used is lost. To workaround this the driver
had a bunch of state in various places e.g. as_mob or cpu_blit to
somehow convey the information on which placement was intended.

Fix it properly by allowing the buffer objects to hold their preferred
placement so it can be reused whenever needed. This makes the entire
validation pipeline a lot easier both to understand and maintain.

Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Reviewed-by: Maaz Mombasawala <mombasawalam@vmware.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230131033542.953249-8-zack@kde.org

drm/vmwgfx: Rename dummy to is_iomem

Rename dummy to is_iomem because that's what it is even if we're not
activelly using it. Makes the code easier to read.

Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Reviewed-by: Maaz Mombasawala <mombasawalam@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230131033542.953249-7-zack@kde.org

drm/vmwgfx: Cleanup the vmw bo usage in the cursor paths

Base mapped count is useless because the ttm unmap functions handle
null maps just fine so completely remove all the code related to it.

Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Reviewed-by: Maaz Mombasawala <mombasawalam@vmware.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230131033542.953249-6-zack@kde.org

drm/vmwgfx: Simplify fb pinning

Only the legacy display unit requires pinning of the fb memory in vram.
Both the screen objects and screen targets can present from any buffer.
That makes the pinning abstraction pointless. Simplify all of the code
and move it to the legacy display unit, the only place that needs it.

Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Reviewed-by: Maaz Mombasawala <mombasawalam@vmware.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230131033542.953249-5-zack@kde.org

drm/vmwgfx: Rename vmw_buffer_object to vmw_bo

The rest of the drivers which are using ttm have mostly standardized on
driver_prefix_bo as the name for subclasses of the TTM buffer object.
Make vmwgfx match the rest of the drivers and follow the same naming
semantics.

This is especially clear given that the name of the file in which the
object was defined is vmw_bo.c.

Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Reviewed-by: Maaz Mombasawala <mombasawalam@vmware.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230131033542.953249-4-zack@kde.org

drm/vmwgfx: Remove the duplicate bo_free function

Remove the explicit bo_free parameter which was switching between
vmw_bo_bo_free and vmw_gem_destroy which had exactly the same
implementation.

It makes no sense to keep parameter which is always the same, remove it
and all code referencing it. Instead use the vmw_bo_bo_free directly.

Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Reviewed-by: Maaz Mombasawala <mombasawalam@vmware.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230131033542.953249-3-zack@kde.org

drm/vmwgfx: Use the common gem mmap instead of the custom code

Before vmwgfx supported gem it needed to implement the entire mmap logic
explicitly. With GEM support that's not needed and the generic code
can be used by simply setting the vm_ops to vmwgfx specific ones on the
gem object itself.

Removes a lot of code from vmwgfx without any functional difference.

Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Reviewed-by: Maaz Mombasawala <mombasawalam@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230131033542.953249-2-zack@kde.org

drm/shmem-helper: Fix locking for drm_gem_shmem_get_pages_sgt()

Other functions touching shmem->sgt take the pages lock, so do that here
too. drm_gem_shmem_get_pages() & co take the same lock, so move to the
_locked() variants to avoid recursive locking.

Discovered while auditing locking to write the Rust abstractions.

Fixes: 2194a63a818d ("drm: Add library for shmem backed GEM objects")
Fixes: 4fa3d66f132b ("drm/shmem: Do dma_unmap_sg before purging pages")
Signed-off-by: Asahi Lina <lina@asahilina.net>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230205125124.2260-1-lina@asahilina.net

drm/vgem: add missing mutex_destroy

vgem_fence_open() instantiates a mutex for a particular fence
instance, but never destroys it by calling mutex_destroy() in
vgem_fence_close().

So, add the missing mutex_destroy() to guarantee proper resource
destruction.

Fixes: 407779848445 ("drm/vgem: Attach sw fences to exported vGEM dma-buf (ioctl)")
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Signed-off-by: Maíra Canal <mairacanal@riseup.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20230202125517.427976-1-mcanal@igalia.com

drm: remove dumb_destroy callback

Not used by any driver any more.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230126102814.8722-2-christian.koenig@amd.com

drm/amdgpu: Remove TTM resource->start visible VRAM condition v2

Use amdgpu_bo_in_cpu_visible_vram() instead.

v2 (chk): fix test inversion

Signed-off-by: Somalapuram Amaranath <Amaranath.Somalapuram@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230208090106.9659-2-Amaranath.Somalapuram@amd.com

drm/bridge: panel: Set orientation on panel_bridge connector

Commit 15b9ca1641f0 ("drm: Config orientation property if panel provides
it") added a helper to set the panel orientation early but only
connected this for drm_bridge_connector, which constructs a panel bridge
with DRM_BRIDGE_ATTACH_NO_CONNECTOR and creates the connector itself.

When the DRM_BRIDGE_ATTACH_NO_CONNECTOR flag is not specified and the
panel_bridge creates its own connector the orientation is not set unless
the panel does it in .get_modes which is too late and leads to a warning
splat from __drm_mode_object_add() because the device is already
registered.

Call the necessary function to set add the orientation property when the
connector is created so that it is available before the device is
registered.

Signed-off-by: John Keeping <john@metanate.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230120114313.2087015-1-john@metanate.com

drm/ttm: prevent moving of pinned BOs

We have checks for this in the individual drivers move callback, but
it's probably better to generally forbid that on a higher level.

Also stops exporting ttm_resource_compat() since that's not necessary
any more after removing the extra checks in vmwgfx.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230130120636.63765-6-matthew.auld@intel.com

drm/ttm: stop allocating a dummy resource for pipelined gutting

That should not be necessary any more when drivers should at least be
able to handle a move without a resource.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Acked-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230130120636.63765-5-matthew.auld@intel.com

drm/ttm: stop allocating dummy resources during BO creation

That should not be necessary any more when drivers should at least be
able to handle the move without a resource.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Acked-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230130120636.63765-4-matthew.auld@intel.com

drm/ttm: clear the ttm_tt when bo->resource is NULL

In the next few patches, when initially creating a ttm BO, the
bo->resource is NULL, and the driver is then expected to handle the
initial dummy move.  However, if this is created as a system resource
the first ttm_tt we create will always have the clear value set to
false. Previously the initial ttm_tt would be created in
ttm_bo_validate() with the clear parameter always set to true.

Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Christian König <ckoenig.leichtzumerken@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230130101230.25347-3-matthew.auld@intel.com
Acked-by: Nirmoy Das <nirmoy.das@intel.com>
Signed-off-by: Christian König <christian.koenig@amd.com>

drm/i915/ttm: audit remaining bo->resource

In the near future TTM will have NULL bo->resource when the object is
initially created, plus after calling into pipeline-gutting. Try to
handle the remaining cases. In practice NULL bo->resource should be
taken to mean swapped-out or purged object.

v2 (Andrzej):
  - Rather make i915_ttm_cpu_maps_iomem() return false with NULL
    resource.

References: 516198d317d8 ("drm/i915: audit bo->resource usage v3")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230130101230.25347-2-matthew.auld@intel.com
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Acked-by: Christian König <ckoenig.leichtzumerken@gmail.com>
Signed-off-by: Christian König <christian.koenig@amd.com>

drm/i915/ttm: fix sparse warning

Sparse complains with:

drivers/gpu/drm/i915/gem/i915_gem_ttm.c:1066:21: sparse:
expected restricted vm_fault_t [assigned] [usertype] ret
drivers/gpu/drm/i915/gem/i915_gem_ttm.c:1066:21: sparse: got int

Fixes: 516198d317d8 ("drm/i915: audit bo->resource usage v3")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230130101230.25347-1-matthew.auld@intel.com
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Acked-by: Christian König <ckoenig.leichtzumerken@gmail.com>
Signed-off-by: Christian König <christian.koenig@amd.com>

accel/ivpu: Fix old dma_buf api usage

Update according to new dma-buf locking scheme.

Remove redundant WARN_ON()'s, dma_buf functions internally
have the same warnings already.

Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230202092114.2637452-5-stanislaw.gruszka@linux.intel.com

accel/ivpu: Set dma max_segment_size

Avoid below spurious warning:

[  264.844029] DMA-API: intel_vpu 0000:00:0b.0: mapping sg segment longer than device claims to support [len=143360] [max=65536]
[  264.844038] WARNING: CPU: 0 PID: 1254 at kernel/dma/debug.c:1160 debug_dma_map_sg+0x6ca/0xb70

Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230202092114.2637452-4-stanislaw.gruszka@linux.intel.com

accel/ivpu: Send VPU_JSM_MSG_CONTEXT_DELETE when deleting context

The VPU_JSM_MSG_CONTEXT_DELETE will remove any resources associated
with the SSID, that included any blobs create by the user space
application.

The command can also remove doorbell registrations, but since this
does not work in HW scheduling case, we do not depend on this
capability and unregister the doorbells explicitly.

Signed-off-by: Andrzej Kacprowski <andrzej.kacprowski@linux.intel.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230202092114.2637452-3-stanislaw.gruszka@linux.intel.com

accel/ivpu: Fix FW API data alignment issues

FW API structures have been updated to fix misaligned
structure members.

Also changed JSM message header format to account for
future improvements.

Added explicit check for minimum supported JSM API version.

Signed-off-by: Andrzej Kacprowski <andrzej.kacprowski@linux.intel.com>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230202092114.2637452-2-stanislaw.gruszka@linux.intel.com

drm/rockchip: Drop unbalanced obj unref

In the error path, rockchip_drm_gem_object_mmap() is dropping an obj
reference that it doesn't own.

Fixes: 41315b793e13 ("drm/rockchip: use drm_gem_mmap helpers")
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230119231734.2884543-1-robdclark@gmail.com

drm/rockchip: avoid duplicate mappings for IOMMU devices

If a buffer is allocated with alloc_kmap, then it is vmap'd on creation
and there is no reason to map it again in rockchip_gem_prime_vmap() when
the existing mapping can be used.

Signed-off-by: John Keeping <john@metanate.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20221110172415.2853420-1-john@metanate.com

drm/rockchip: vop: Quiet always-warning AFBC log

The downstream code from which this was derived didn't ever run through
this 'switch' block with non-AFBC formats, but the upstream code does --
we use this function to probe whether a given format is supported.

Demote the warning to eliminate this sort of warning seen on every
boot:

  [drm] unsupported AFBC format[3231564e]

And make it warn more than once, because if we *actually* care to see
what formats we're probing/rejecting and for what reasons, we probably
care about more than just the first message.

Drop the comment, because one of the two *is* commonly reachable.

And lastly, drop the unreachable return; we'd do better to let the
compiler complain if we start hitting this unexpectedly.

Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20221031101557.1.Ic1569d394173c1c3016142fee4bb87a09753db94@changeid

drm/rockchip: vop2: add support for the rgb output block

The Rockchip VOP2 features an internal RGB output block, which can be
attached any video port of the VOP2. Add support for this output block.

Signed-off-by: Michael Riesch <michael.riesch@wolfvision.net>
Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230124054706.3921383-6-michael.riesch@wolfvision.net

drm/rockchip: vop2: use symmetric function pair vop2_{create,destroy}_crtcs

Let the function name vop2_create_crtcs reflect that the function creates
multiple CRTCS. Also, use a symmetric function pair to create and destroy
the CRTCs and the corresponding planes.

Signed-off-by: Michael Riesch <michael.riesch@wolfvision.net>
Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230124054706.3921383-5-michael.riesch@wolfvision.net