Marek Vasut [Sun, 19 Mar 2023 17:02:37 +0000 (18:02 +0100)]
net: phy: aquantia: Staticize PHY driver entries
These struct phy_driver ... instances are local to this source code
file, staticize them. No functional change.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Acked-by: Michal Simek <michal.simek@amd.com>
Tested-by: Michal Simek <michal.simek@amd.com> #microblaze (MANUAL_RELOC)
Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
Tom Rini [Thu, 6 Apr 2023 02:19:57 +0000 (22:19 -0400)]
Merge tag 'fsl-qoriq-2023-4-6' of https://source.denx.de/u-boot/custodians/u-boot-fsl-qoriq
convert NXP LS1028A RDB and QDS to DM_SERIAL
enable DM_SERIAL for ls1088a
sync serial nodes with linux for lx2160a/ls1088a
Tom Rini [Wed, 5 Apr 2023 22:59:47 +0000 (18:59 -0400)]
Merge branch '2023-04-05-blkmap-composable-virtual-block-devices'
To quote the author:
Block maps are a way of looking at various sources of data through the
lens of a regular block device. It lets you treat devices that are not
block devices, like RAM, as if they were. It also lets you export a
slice of an existing block device, which does not have to correspond to
a partition boundary, as a new block device.
This is primarily useful because U-Boot's filesystem drivers only
operate on block devices, so a block map lets you access filesystems
wherever they might be located.
The implementation is loosely modeled on Linux's "Device Mapper"
subsystem, see the kernel documentation [1] for more information.
The primary use-cases are to access filesystem images stored in RAM, and
within FIT images stored on disk. See doc/usage/blkmap.rst for more
details.
The architecture is pluggable, so adding other types of mappings should
be quite easy.
[1]: https://docs.kernel.org/admin-guide/device-mapper/index.html
Tobias Waldekranz [Thu, 16 Feb 2023 15:33:55 +0000 (16:33 +0100)]
efi_loader: device_path: support blkmap devices
Create a distinct EFI device path for each blkmap device.
Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tobias Waldekranz [Thu, 16 Feb 2023 15:33:54 +0000 (16:33 +0100)]
doc: blkmap: Add introduction and examples
Explain block maps by going through two common use-cases.
Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tobias Waldekranz [Thu, 16 Feb 2023 15:33:53 +0000 (16:33 +0100)]
test: blkmap: Add test suite
Verify that:
- Block maps can be created and destroyed
- Mappings aren't allowed to overlap
- Multiple mappings can be attached and be read/written from/to
Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tobias Waldekranz [Thu, 16 Feb 2023 15:33:52 +0000 (16:33 +0100)]
cmd: blkmap: Add blkmap command
Add a frontend for the blkmap subsystem. In addition to the common
block device operations, this allows users to create and destroy
devices, and map in memory and slices of other block devices.
With that we support two primary use-cases:
- Being able to "distro boot" from a RAM disk. I.e., from an image
where the kernel is stored in /boot of some filesystem supported
by U-Boot.
- Accessing filesystems not located on exact partition boundaries,
e.g. when a filesystem image is wrapped in an FIT image and stored
in a disk partition.
Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tobias Waldekranz [Thu, 16 Feb 2023 15:33:51 +0000 (16:33 +0100)]
blk: blkmap: Add linear device mapping support
Allow a slice of an existing block device to be mapped to a
blkmap. This means that filesystems that are not stored at exact
partition boundaries can be accessed by remapping a slice of the
existing device to a blkmap device.
Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tobias Waldekranz [Thu, 16 Feb 2023 15:33:50 +0000 (16:33 +0100)]
blk: blkmap: Add memory mapping support
Allow a slice of RAM to be mapped to a blkmap. This means that RAM can
now be accessed as if it was a block device, meaning that existing
filesystem drivers can now be used to access ramdisks.
Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tobias Waldekranz [Thu, 16 Feb 2023 15:33:49 +0000 (16:33 +0100)]
blk: blkmap: Add basic infrastructure
blkmaps are loosely modeled on Linux's device mapper subsystem. The
basic idea is that you can create virtual block devices whose blocks
can be backed by a plethora of sources that are user configurable.
This change just adds the basic infrastructure for creating and
removing blkmap devices. Subsequent changes will extend this to add
support for actual mappings.
Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tobias Waldekranz [Thu, 16 Feb 2023 15:33:48 +0000 (16:33 +0100)]
cmd: blk: Allow generic read/write operations to work in sandbox
Ensure that the memory destination/source addresses of block
read/write operations are mapped in before access. Currently, this is
only needed on sandbox builds.
Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tobias Waldekranz [Thu, 16 Feb 2023 15:33:47 +0000 (16:33 +0100)]
image: Fix script execution from FIT images with external data
Update the script loading code to recognize when script data is stored
externally from the FIT metadata (i.e., built with `mkimage -E`).
Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tom Rini [Wed, 5 Apr 2023 14:40:05 +0000 (10:40 -0400)]
Merge branch '2023-04-04-android-image-v3-v4-support'
To quote the author:
* This is based on Roman Stratiienko's work to support boot image header version 3 and 4.
* This supports the new boot image headers v3, v4 and bootconfig feature.
https://source.android.com/docs/core/architecture/bootloader/boot-image-header
https://source.android.com/docs/core/architecture/bootloader/implementing-bootconfig
- Tested on Amlogic Khadas vim3l, a reference board for Android Open Source Project
https://www.khadas.com/vim3l
And on AM625 Texas Instruments board with 5.10 linux kernel
Main changes :
- New partition : vendor boot, with a specific vendor ramdisk
- DTB is stored in the vendor boot partition
- The generic ramdisk is placed after the vendor ramdisk
- Bootconfig feature support
Here is a link to see the related android boot flow changes on KHADAS vim3l as an example:
https://gitlab.baylibre.com/baylibre/amlogic/atv/u-boot/-/commits/souajih/BootImagev4/
Safae Ouajih [Sun, 5 Feb 2023 23:50:21 +0000 (00:50 +0100)]
Dockerfile: add mkbootimg tool
mkbootimg tool is part of the Android project and it is
used to pack Android boot images such as boot image
and vendor_boot image.
Use the following command to run mkbootimg:
$ python3 -m mkbootimg
Add mkbootimg to the docker file
Signed-off-by: Safae Ouajih <souajih@baylibre.com>
Tested-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Safae Ouajih [Sun, 5 Feb 2023 23:50:20 +0000 (00:50 +0100)]
test/py: android: extend abootimg test
test_abootimg is extended to include the testing of boot images
version 4. For this, boot.img and vendor_boot.img have been
generated using mkbootimg tool with setting the header
version to 4.
This tests:
- Getting the header version using abootimg
- Extracting the load address of the dtb
- Extracting the dtb start address in RAM
Running test:
$ ./test/py/test.py --bd sandbox --build -k test_abootimg
Signed-off-by: Safae Ouajih <souajih@baylibre.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Safae Ouajih [Sun, 5 Feb 2023 23:50:19 +0000 (00:50 +0100)]
doc: android: add documentation for v3, v4 boot image header
Update the Android documentation to describe version 3 and 4 of boot
image header.
Signed-off-by: Safae Ouajih <souajih@baylibre.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Safae Ouajih [Sun, 5 Feb 2023 23:50:18 +0000 (00:50 +0100)]
android: boot: support bootconfig
Support Bootconfig feature.
- The bootconfig feature replaces the androidboot.*
kernel cmdline options.
This was adapted from downstream [1] commit :
7af0a0506d4d ("cuttlefish:
support bootconfig parameters").
Link:[1] https://android.googlesource.com/platform/external/u-boot/
Signed-off-by: Safae Ouajih <souajih@baylibre.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Tested-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Safae Ouajih [Sun, 5 Feb 2023 23:50:17 +0000 (00:50 +0100)]
android: boot: support boot image header version 3 and 4
Enable the support for boot image header version 3 and 4
using abootimg command.
In order to use version 3 or 4:
1- Vendor boot image address should be given to abootimg cmd.
abootimg addr $1 $vendor_boot_load_addr
2- "ramdisk_addr_r" env variable (ramdisk address) should be set to host
the ramdisk : generic ramdisk + vendor ramdisk
Replace "struct andr_boot_img_hdr_v0*" by "void *" in
some functions since v3 and v4 are now supported as well.
Signed-off-by: Safae Ouajih <souajih@baylibre.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Tested-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Safae Ouajih [Sun, 5 Feb 2023 23:50:16 +0000 (00:50 +0100)]
drivers: fastboot: zImage flashing is not supported for v3, v4
With vendor boot image introduced in version 3 and 4 of boot
image header, boot information is located in both boot image
and vendor boot image.
Flashing zImage is not supported for version 3 and 4 since this
requires updating vendor boot image and/or generating a new image.
Print an error message when the boot image header version is
greater than 2.
Signed-off-by: Safae Ouajih <souajih@baylibre.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Tested-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Safae Ouajih [Sun, 5 Feb 2023 23:50:15 +0000 (00:50 +0100)]
android: boot: update android_image_get_dtb_img_addr to support v3, v4
Add support for boot image version 3 and 4 in
android_image_get_dtb_img_addr().
Since the dtb is now included in vendor_boot image
instead of boot image, extract the dtb address from
vendor_boot image when a v3 or v4 is used.
Signed-off-by: Safae Ouajih <souajih@baylibre.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Tested-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Safae Ouajih [Sun, 5 Feb 2023 23:50:14 +0000 (00:50 +0100)]
android: boot: support extra command line
In version 3 and 4 of boot image header, the vendor specific
command line are located in vendor boot image. Thus, use
extra command line to add those cmd to bootargs.
Signed-off-by: Safae Ouajih <souajih@baylibre.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Tested-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Safae Ouajih [Sun, 5 Feb 2023 23:50:13 +0000 (00:50 +0100)]
android: boot: ramdisk: support vendor ramdisk
Version 3 and 4 of boot image header introduced
vendor boot ramdisk: Please check include/android_image.h
for details.
The ramdisk is now split into a generic ramdisk in boot image
and a vendor ramdisk in vendor boot image.
Support the new vendor ramdisk.
Signed-off-by: Safae Ouajih <souajih@baylibre.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Tested-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Safae Ouajih [Sun, 5 Feb 2023 23:50:12 +0000 (00:50 +0100)]
android: boot: update android_image_get_data to support v3, v4
Since boot image header version 3 and 4 introduced vendor boot image,
use the following functions to fill the generic android
structure : andr_image_data:
- android_boot_image_v3_v4_parse_hdr()
- android_vendor_boot_image_v3_v4_parse_hdr()
Update android_image_get_data() to support v3 and v4
Signed-off-by: Safae Ouajih <souajih@baylibre.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Tested-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Safae Ouajih [Sun, 5 Feb 2023 23:50:11 +0000 (00:50 +0100)]
android: boot: add vendor boot image to prepare for v3, v4 support
Introduce vendor boot image for version 3 and 4 of boot image header.
The vendor boot image will hold extra information about kernel, dtb
and ramdisk.
This is done to prepare for boot image version 3 and 4 support.
Signed-off-by: Safae Ouajih <souajih@baylibre.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Tested-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Safae Ouajih [Sun, 5 Feb 2023 23:50:10 +0000 (00:50 +0100)]
android: boot: boot image header v3, v4 do not support recovery DTBO
android_image_get_dtbo() is used to get recovery DTBO via abootimg cmd.
This is not supported in boot image header v3 and v4. Thus, print an
error message when v1,v2 header version are not used.
Signed-off-by: Safae Ouajih <souajih@baylibre.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Tested-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Safae Ouajih [Sun, 5 Feb 2023 23:50:09 +0000 (00:50 +0100)]
android: boot: content print is not supported for v3, v4 header version
Content print is not supported for version 3 and 4 of boot image header.
Thus, only print that content when v2 is used.
Update android_print_contents() to print an error message
when trying to print boot image header version 3 or 4 content.
Signed-off-by: Safae Ouajih <souajih@baylibre.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Tested-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Safae Ouajih [Sun, 5 Feb 2023 23:50:08 +0000 (00:50 +0100)]
android: boot: move to andr_image_data structure
Move from andr_boot_img_hdr_v0 to andr_image_data
structure to prepare for boot image header
version 3 and 4.
Signed-off-by: Safae Ouajih <souajih@baylibre.com>
Tested-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Safae Ouajih [Sun, 5 Feb 2023 23:50:07 +0000 (00:50 +0100)]
android: boot: kcomp: support andr_image_data
andr_image_data structure is used as a global representation of
boot image header structure. Introduce this new structure to
support all boot header versions : v0,v1.v2.v3.v4 and to support
v3 and v4 while maitaining support for v0,v1,v2.
The need of using andr_image_data comes from the change of header
structure in both version 3 and 4.
Rework android_image_get_kcomp() to support this new struct.
Signed-off-by: Safae Ouajih <souajih@baylibre.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Tested-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Safae Ouajih [Sun, 5 Feb 2023 23:50:06 +0000 (00:50 +0100)]
android: boot: add boot image header v3 and v4 structures
Add support for v3/v4 boot image format by adding
the following structures:
- andr_boot_img_hdr_v3 : describes boot image header
- andr_vnd_boot_img_hdr : describes vendor boot image header
These definitions have been copied over from the AOSP documentation at
[1] and [2]
Boot arg sizes are taken from [3]:
commit:
35fb6262bc3f (ANDROID: Support for vendor boot)
This also adds documentation for boot image header v3/v4 structure
that was imported from [4], file: include/bootimg/bootimg.h
commit:
8d0922bfb932 (Adding GKI signature in boot.img v4)
Link:[1] https://source.android.com/docs/core/architecture/bootloader/boot-image-header
Link:[2] https://source.android.com/docs/core/architecture/bootloader/partitions/vendor-boot-partitions#vendor-boot-header
Link:[3] https://android.googlesource.com/platform/external/u-boot
Link:[4] https://android.googlesource.com/platform/system/tools/mkbootimg
Signed-off-by: Safae Ouajih <souajih@baylibre.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Tested-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Safae Ouajih [Sun, 5 Feb 2023 23:50:05 +0000 (00:50 +0100)]
android: boot: replace android_image_check_header
With the new vendor boot image introduced in versions 3 and 4
of boot image header, the header check must be done for both boot
image and vendor boot image. Thus, replace android_image_check_header()
by is_android_boot_image_header() to only refer to boot image header check.
Signed-off-by: Safae Ouajih <souajih@baylibre.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Tested-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Safae Ouajih [Sun, 5 Feb 2023 23:50:04 +0000 (00:50 +0100)]
android: boot: support vendor boot image in abootimg
Vendor boot image is introduced in boot image header
version 3 and 4. Please check [1] for more details.
To prepare for boot image v3/v4 support, allow the abootimg command
to store the vendor_boot image address.
Full support for this new format will be done in a future patch.
Link:[1] https://source.android.com/docs/core/architecture/bootloader/partitions/vendor-boot-partitions
Signed-off-by: Safae Ouajih <souajih@baylibre.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Tested-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Safae Ouajih [Sun, 5 Feb 2023 23:50:03 +0000 (00:50 +0100)]
android: boot: rename andr_img_hdr -> andr_boot_img_hdr_v0
Android introduced boot header version 3 or 4.
The header structure change with version 3 and 4 to support
the new updates such as:
- Introducing Vendor boot image: with a vendor ramdisk
- Bootconfig feature (v4)
Change andr_img_hdr struct name to maintain support for version v0,
v1 and v2 while introducing version 3 and 4.
Signed-off-by: Safae Ouajih <souajih@baylibre.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Tested-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Tom Rini [Tue, 4 Apr 2023 18:36:43 +0000 (14:36 -0400)]
Merge branch '2023-04-04-update-to-clang-16'
- Update our CI to use clang-16 for tests. This also changes slightly
how we do linker lists so that we don't rely on undefined behavior
that lead to clang-15 and later failing to work (and in some cases
seemingly, earlier versions of clang would sometimes fail).
Tom Rini [Tue, 21 Mar 2023 19:07:45 +0000 (15:07 -0400)]
CI: Move to clang-16
As this is now the stable release, move to using that now for our tests.
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tom Rini [Tue, 28 Mar 2023 18:54:51 +0000 (14:54 -0400)]
linker_lists: Rework start/end macros to not rely on undefined behavior
Per the GCC bug listed below, the way we do linker lists is relying on
undefined behavior that seems to work in gcc, but doesn't always work in
clang. Andrew suggests rewriting our start/end macros in a different way
(as implemented here, from what he said in comment 1) to avoid these
problems.
Reported-by: AdityaK <appujee@google.com>
Suggested-by: Andrew Pinski <apinski@marvell.com>
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=108915
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Andrew Pinski <apinski@marvell.com>
Tom Rini [Tue, 28 Mar 2023 18:54:50 +0000 (14:54 -0400)]
smartweb: Enable LTO
In order to prepare for slight size growth due to reworking linker list
support, enable LTO here to save more space again.
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
Tom Rini [Thu, 23 Mar 2023 18:57:58 +0000 (14:57 -0400)]
Dockerfile: Populate a pip cache
Given the number of jobs in CI we have which use python and pip install
packages, we should do this once in the Dockerfile, in order to populate
the cache. We let each job continue to create and use the virtual
environments they need to facilitate making updates to these
environments easier.
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tom Rini [Thu, 23 Mar 2023 18:57:57 +0000 (14:57 -0400)]
pytest: Update requirements to match sphinx versions
In order to better make use of pip caches, and also for better overall
consistency, we should use the same versions of packages in each of our
python requirements files. Update pytest to use the newer versions of
packages we use in sphinx builds.
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tom Rini [Tue, 4 Apr 2023 13:50:13 +0000 (09:50 -0400)]
Merge tag 'u-boot-imx-next-
20230404' of https://gitlab.denx.de/u-boot/custodians/u-boot-imx
u-boot-imx-next-
20230404
------------------------
CI : https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/15887
- boards : DH-Electronics, Toradex, imx8mp-beacon-kit
Ioana Ciornei [Wed, 15 Mar 2023 11:04:18 +0000 (13:04 +0200)]
board: freescale: lx2160a: remove the PL01X device instantiation
There is no need for the board file to instantiate a PL01X platform
device anymore. This is all taken care of by the DM code which now will
probe the device based on the DT node.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Ioana Ciornei [Wed, 15 Mar 2023 11:04:17 +0000 (13:04 +0200)]
arch: arm: dts: fsl-lx2160a.dtsi: tag serial nodes with bootph-all
Tag the serial nodes with bootph-all in order to have these nodes and
the drivers available before relocation.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Ioana Ciornei [Wed, 15 Mar 2023 11:04:16 +0000 (13:04 +0200)]
arch: arm: dts: fsl-lx2160a.dtsi: sync serial nodes with Linux
Sync the serial nodes of the LX2160A based boards with their
representation in Linux. We also imported the clockgen and sysclk nodes
which are dependencies.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Ioana Ciornei [Wed, 15 Mar 2023 11:04:15 +0000 (13:04 +0200)]
arch: arm: dts: fsl-lx2160a.dtsi: move the serial nodes under soc
Move the serial nodes under the soc node. No changes are made to the
nodes, just their location is changed.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Ioana Ciornei [Wed, 15 Mar 2023 11:04:14 +0000 (13:04 +0200)]
arch: arm: dts: fsl-lx2160a.dtsi: add an 'soc' node
The u-boot dts for these boards do not have an soc node, unlike its
Linux counterpart. This patch just adds the soc node as seen in Linux,
the next patches will move some nodes under it.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Ioana Ciornei [Wed, 15 Mar 2023 11:04:13 +0000 (13:04 +0200)]
configs: ls1088a: enable DM_SERIAL
Now that the DT nodes for the serial devices are in place for these
boards, enable DM_SERIAL in the associated configs.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Ioana Ciornei [Wed, 15 Mar 2023 11:04:12 +0000 (13:04 +0200)]
arch: arm: dts: fsl-ls1088a.dtsi: tag serial nodes with bootph-all
Tag the serial nodes with bootph-all in order to have these nodes and
the drivers available before relocation.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Ioana Ciornei [Wed, 15 Mar 2023 11:04:11 +0000 (13:04 +0200)]
arch: arm: dts: fsl-ls1088a.dtsi: sync serial nodes with Linux
Sync the serial nodes of the LS1088A based boards with their
representation in Linux. We also imported the clockgen and sysclk nodes
which are dependencies.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Ioana Ciornei [Wed, 15 Mar 2023 11:04:10 +0000 (13:04 +0200)]
arch: arm: dts: fsl-ls1088a.dtsi: move the serial nodes under soc
Move the serial nodes under the soc node. No changes are made to the
nodes, just their location is changed.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Ioana Ciornei [Wed, 15 Mar 2023 11:04:09 +0000 (13:04 +0200)]
arch: arm: dts: fsl-ls1088a.dtsi: add an 'soc' node
The u-boot dts for these boards do not have an soc node, unlike its
Linux counterpart. This patch just adds the soc node as seen in Linux,
the next patches will move some nodes under it.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Vladimir Oltean [Wed, 15 Mar 2023 11:01:16 +0000 (13:01 +0200)]
configs: convert NXP LS1028A RDB and QDS to DM_SERIAL
Since the device trees are more or less synchronized with Linux, the
only necessary changes are to enable CONFIG_DM_SERIAL and the DM_SERIAL
driver for ns16550 (ns16550.c rather than serial_ns16550.c).
ls1028aqds_tfa_lpuart_defconfig already uses DM_SERIAL for the LPUART
driver, so I didn't touch that.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Adam Ford [Fri, 24 Mar 2023 03:06:16 +0000 (22:06 -0500)]
arm64: imx: Add support for imx8mp-beacon-kit
Beacon Embedded has an i.MX8M Plus development kit which consists
of a SOM + baseboard. The SOM includes Bluetooth, WiFi, QSPI, eMMC,
and one Ethernet PHY. The baseboard includes audio, HDMI, USB-C Dual
Role port, USB Hub with five ports, a PCIe slot, and a second Ethernet
PHY. The device trees are already queued for inclusion in Linux 6.3.
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Marek Vasut [Tue, 7 Mar 2023 07:51:04 +0000 (08:51 +0100)]
ARM: imx: Enable LTO for DH electronics i.MX6 DHCOM
Enable LTO to reduce the size of SPL, which with SPL SDP
support may be close to the limit.
Signed-off-by: Marek Vasut <marex@denx.de>
Marek Vasut [Mon, 3 Apr 2023 23:07:43 +0000 (01:07 +0200)]
ARM: dts: imx: Add support for Data Modul i.MX8M Plus eDM SBC
Add support for Data Modul i.MX8M Plus eDM SBC board. This is an
evaluation board for various custom display units. Currently
supported are serial console, ethernet, eMMC, SD, SPI NOR, USB.
Signed-off-by: Marek Vasut <marex@denx.de>
Marek Vasut [Mon, 3 Apr 2023 22:39:37 +0000 (00:39 +0200)]
ARM: dts: imx: Add WDT reboot bindings on DH i.MX6 DHSOM
Add WDT reboot bindings on DH i.MX6 DHSOM to permit the platform
to reboot via WDT in U-Boot. These are custom U-Boot bindings,
hence they are placed in -u-boot.dtsi .
Reviewed-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Marek Vasut <marex@denx.de>
Emanuele Ghidoli [Mon, 3 Apr 2023 12:01:57 +0000 (14:01 +0200)]
board: verdin-imx8mp: change prints in spl_dram_init function
change prints to show which DDR configuration (single/dual rank) is used
Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com>
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Emanuele Ghidoli [Mon, 3 Apr 2023 12:01:56 +0000 (14:01 +0200)]
board: verdin-imx8mp: compact slight different lpddr4 configuration
Deduplicate similar DDRC configurations and LPDDR4 training patterns
by patching a single configuration.
The aim is to reduce the SPL memory footprint and simplify maintenance
of lpddr4_timing.c
Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com>
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Emanuele Ghidoli [Mon, 3 Apr 2023 12:01:55 +0000 (14:01 +0200)]
board: verdin-imx8mp: update lpddr4 configuration and training
Update LPDDR4 configuration and training using updated spreadsheet and
tools from NXP using data from previous spreadsheet and verified
toward datasheet:
- MX8M_Plus_LPDDR4_RPA_v9.xlsx
- mscale_ddr_tool_v3.30.exe
From:
https://community.nxp.com/t5/i-MX-Processors-Knowledge-Base/i-MX-8M-Family-DDR-Tool-Release/ta-p/1104467
Some register values differ due to these fixes/modifications:
- corrected calculation of T_CKPDX parameter (equal to tCKCKEH for LPDDR4)
- corrected ECC related items, none of which affect normal operation
when ECC is not enabled
- corrected formula for calculation of tRTP in cell D122
Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com>
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Emanuele Ghidoli [Mon, 3 Apr 2023 12:01:54 +0000 (14:01 +0200)]
board: verdin-imx8mp: fix lpddr4 refresh timing
Change tRFCmin (tRFCab) from 280 ns to 380 ns to be compliant with
current and futures memories.
Fixes:
2bc2f817cea7 ("board: toradex: add verdin imx8m plus support")
Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com>
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Emanuele Ghidoli [Mon, 3 Apr 2023 12:01:53 +0000 (14:01 +0200)]
board: verdin-imx8mp: update ddrc config for different lpddr4 memories
Add support to Verdin IMX8MP V1.1B SKU which uses
MT53E1G32D2FW-046 WT:B memory.
Compared to the 8 GB memory (MT53E2G32D4NQ-046 WT:A) used on
Verdin IMX8MP V1.0A it has 16 row addresses instead of 17.
In fact, the new memory, is a 2 GB/rank memory. The 8 GB memory is a
4 GB/rank memory.
Manually tweaking Host Interface addresses vs LPDDR4 signals mapping it
is possible to have a single configuration working with both memories:
- Old configuration: HIF bit 30 -> rank, HIF bit 29 -> Row 16
- New configuration: HIF bit 29 -> rank, HIF bit 30 -> Row 16
With this change the memory space from the host processor is contiguous
for both the configurations and the correct memory size is computed
using get_ram_size() at runtime.
Support for single rank memories still works thanks to the fact
dual ranks training fails (ddr_init->ddr_cfg_phy) toward single rank
memories.
Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com>
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Markus Niebel [Mon, 27 Mar 2023 08:23:31 +0000 (10:23 +0200)]
configs: tqma6: enable DM_THERMAL
Enabling this gives some informal output at boot time.
Signed-off-by: Markus Niebel <Markus.Niebel@ew.tq-group.com>
Markus Niebel [Mon, 27 Mar 2023 08:23:30 +0000 (10:23 +0200)]
configs: tqma6: enable DM for MDIO / PHY
Since this works with current device trees, enabled these.
Signed-off-by: Markus Niebel <Markus.Niebel@ew.tq-group.com>
Markus Niebel [Mon, 27 Mar 2023 08:23:29 +0000 (10:23 +0200)]
configs: tqma6: switch to DM_SERIAL
Usage without DM_SERIAL is deprecated. Fix this.
Signed-off-by: Markus Niebel <Markus.Niebel@ew.tq-group.com>
Luca Ceresoli [Fri, 10 Mar 2023 10:07:52 +0000 (11:07 +0100)]
arm: imx: add u-boot-nand.imx to boot from NAND without SPL
U-Boot can be booted from NAND without SPL by prepending the DCD header to
the actual U-Boot binary. However this requires prepending 1024 bytes to
u-boot.imx (DCD + u-boot.bin).
There is already a similar target to build spl/u-boot-nand-spl.imx, add the
same option for no-SPL boot.
Tested on i.MX6ULL.
The resulting layout of u-boot-nand.imx is:
- Offset 0x0000 (0 KiB): padding
- Offset 0x0400 (1 KiB): DCD header
- Offset 0x1000 (4 KiB): u-boot.bin
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Marek Vasut [Tue, 7 Mar 2023 07:51:05 +0000 (08:51 +0100)]
ARM: imx: Enable SDP download in SPL on DH i.MX6 DHSOM
Enable SDP protocol support in SPL for DH i.MX6 DHSOM, now that those
components fit into the SPL due to LTO.
To start U-Boot via SDP upload on i.MX6 DHSOM based board, proceed as follows:
- Compile imx_usb [1] .
- Power off the i.MX6 DHSOM based board.
- Connect both USB-serial console and USB-OTG miniB ports to host PC.
- Switch board to USB boot mode.
- Power on the board.
- Verify using '$ dmesg' that a new device has been detected as follows:
New USB device found, idVendor=15a2, idProduct=0054, bcdDevice= 0.01
New USB device strings: Mfr=1, Product=2, SerialNumber=0
Product: SE Blank ARIK
Manufacturer: Freescale SemiConductor Inc
- Upload U-Boot SPL:
$ imx_usb u-boot-with-spl.imx
- Wait for SPL to come up, the following print ought to be the last on
UART console:
SDP: handle requests...
- Upload U-Boot proper:
$ imx_usb u-boot.img
[1] https://github.com/boundarydevices/imx_usb_loader.git
Signed-off-by: Marek Vasut <marex@denx.de>
Tom Rini [Tue, 4 Apr 2023 00:49:03 +0000 (20:49 -0400)]
Merge https://source.denx.de/u-boot/custodians/u-boot-usb
- Two USB gadget fixes
Tom Rini [Tue, 4 Apr 2023 00:48:24 +0000 (20:48 -0400)]
mx6sx-udoo-neo-basic-u-boot.dtsi: Correct to bootph-all
Updating this was missed in the merge of the next branch back in to
master.
Signed-off-by: Tom Rini <trini@konsulko.com>
Marek Vasut [Tue, 7 Mar 2023 07:42:33 +0000 (08:42 +0100)]
usb: gadget: f_sdp: Add missing spl_board_prepare_for_boot() call
The spl_board_prepare_for_boot() should be called before jump_to_image_no_args()
to perform board-specific deinitialization before jumping to the next stage.
This board-specific deinitialization can be very much anything, e.g. disable
dcache in case it was enabled, or such.
Add the missing spl_board_prepare_for_boot() call into f_sdp .
Signed-off-by: Marek Vasut <marex@denx.de>
Heinrich Schuchardt [Sat, 1 Apr 2023 07:06:55 +0000 (09:06 +0200)]
usb: gadget: missing fallthrough in composite_setup()
Add a missing fallthrough macro. This fixes a -Wimplicit-fallthrough
warning.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Tom Rini [Mon, 3 Apr 2023 20:45:41 +0000 (16:45 -0400)]
Merge branch 'next'
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Mon, 3 Apr 2023 20:38:50 +0000 (16:38 -0400)]
Prepare v2023.04
Signed-off-by: Tom Rini <trini@konsulko.com>
Sinthu Raja [Mon, 3 Apr 2023 17:03:12 +0000 (12:03 -0500)]
arm: dts: k3-j721e-sk-u-boot: fix boot on j721e SK
J721e SK has been broken since at least March 2022.
The main-navss and mcu-navss nodes were renamed and this caused the
A72 SPL to fail early in the boot even before the serial port was
enabled. Fix this.
A later patch series between v2022.07 and v2022.10 additionally broke
boot on this board by introducing hbmc nodes which are not present on
this board. The right fix is to disable these by default in the SOC
dtsi file, but for now we can also disable them in the u-boot dtsi.
With both these fixed, we can now boot the j721e SK board fully from
mainline u-boot.
Fixes:
58d61fb5a77ef ("arm: dts: k3-j721e-sk: Add initial A72 specific dts support")
Fixes:
297daac43afb9 ("arm: dts: k3-j721e-mcu-wakeup: Add HyperBus Controller node")
Reported-by: Anand Gadiyar <gadiyar@ti.com>
Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
[gadiyar@ti.com: update commit description]
Signed-off-by: Anand Gadiyar <gadiyar@ti.com>
Cc: Bryan Brattlof <bb@ti.com>
Tom Rini [Mon, 3 Apr 2023 15:35:30 +0000 (11:35 -0400)]
Merge tag 'dm-next-3apr23' of https://source.denx.de/u-boot/custodians/u-boot-dm into next
Enable VPL tests
Minor changes with fdt command, vboot test, pinctrl
Tom Rini [Mon, 3 Apr 2023 14:43:37 +0000 (10:43 -0400)]
Revert "disk: Use a helper function to reduce duplication"
Per Takahiro Akashi this is not an equivalent rework, so revert it.
This reverts commit
d87bdb82eae66512c222fd93280acaf4dd1cd4be.
Signed-off-by: Tom Rini <trini@konsulko.com>
Fabio Estevam [Wed, 15 Feb 2023 18:24:44 +0000 (15:24 -0300)]
pico-imx6: Pass the mmc alias to fix boot regression
Originally, the mmc aliases node was present in imx6qdl-pico.dtsi.
After the sync with Linux in commit
d0399a46e7cd ("imx6dl/imx6qdl:
synchronise device trees with linux"), the aliases node is gone as
the upstream version does not have it.
This causes a boot regression in which the eMMC card cannot be found anymore.
Fix it by passing the alias node in the u-boot.dtsi file to
restore the original behaviour where the eMMC (esdhc3) was
mapped to mmc0.
Fixes:
d0399a46e7cd ("imx6dl/imx6qdl: synchronise device trees with linux")
Signed-off-by: Fabio Estevam <festevam@denx.de>
Tom Rini [Mon, 3 Apr 2023 14:13:36 +0000 (10:13 -0400)]
Merge tag 'u-boot-imx-
20230403' of https://source.denx.de/u-boot/custodians/u-boot-imx
Fixes for 2023.04
------------------
CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/15831
- fix for imx8mn_bsh_smm_s2
Simon Glass [Sun, 2 Apr 2023 02:01:27 +0000 (14:01 +1200)]
test: Run the VPL tests with 'make check'
Update the script to run VPL tests as well as the others.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Sun, 2 Apr 2023 02:01:26 +0000 (14:01 +1200)]
CI: Ensure that vpl test is run
This is actually skipped at present due to the condition in the file.
Fix this by running all vpl tests.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Sun, 2 Apr 2023 02:01:25 +0000 (14:01 +1200)]
vbe: Use the correct image filename in the test
At present this inadvertently relies on having a symlink to the correct
file from the current directory. Use the correct path to fix this.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Sun, 2 Apr 2023 02:01:24 +0000 (14:01 +1200)]
sandbox: Update the VBE firmware location
The image size was increased but the firmware-update part was not
updated. Correct this so that VBE firmware update can succeed with
sandbox_vpl.
Signed-off-by: Simon Glass <sjg@chromium.org>
Fixes:
85c66dc95c2 ("sandbox: Expand size for VPL image")
Corentin Guillevic [Fri, 24 Mar 2023 13:43:36 +0000 (14:43 +0100)]
doc: sandbox: replace sgdisk input with options
The input provided to sgdisk is in fact aimed for sfdisk. The use of
sgdisk and sfdisk, coming from different projects, is not the same.
So, this commit translates the sfdisk-formatted input into
sgdisk-compatible options. Partitions are not modified.
Signed-off-by: Corentin Guillevic <corentin.guillevic@smile.fr>
Peter Hoyes [Tue, 21 Mar 2023 13:01:16 +0000 (13:01 +0000)]
fdt: Make fdt addr -q quieter
64597346 "fdt: Add -q option to fdt addr for distro_bootcmd" introduced
the -q option for fdt addr, which sets the current working fdt address
without printing any output.
baf41410 "fdt: Show a message when the working FDT changes" made the
utility function set_working_fdt_addr (in cmd/fdt.c) output a message
on each invocation, even if called via fdt addr -q, in which case its
output is now slightly noisier.
To fix this, split out set_working_fdt_addr into set_working_fdt_addr
plus the static function set_working_fdt_addr_quiet.
set_working_fdt_addr_quiet can be called by "quiet" fdt cmd logic and
set_working_fdt_addr is exported (as before) to other boot logic. The
latter calls the former.
Remove the assertion from the fdt addr test case when calling with the
-q argument.
Signed-off-by: Peter Hoyes <Peter.Hoyes@arm.com>
Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Quanyang Wang [Thu, 16 Mar 2023 06:11:46 +0000 (14:11 +0800)]
pinctrl: fix pinctrl_gpio_get_pinctrl_and_offset for gpio-ranges array
Sometimes a multi-element array is used for "gpio-ranges" property in
dts file:
qe_pio_e: gpio-controller@1460 {
......
gpio-ranges = <&pinctrl1 0 20 10>, <&pinctrl2 10 50 20>;
......
};
But the function pinctrl_gpio_get_pinctrl_and_offset can't handle this
case because the "index" argument passed to dev_read_phandle_with_args
is fixed to be "0". Use a loop to traverse the array to fix it.
Signed-off-by: Quanyang Wang <quanyang.wang@windriver.com>
Marek Vasut [Sat, 11 Mar 2023 16:29:21 +0000 (17:29 +0100)]
cmd: fdt: Use env_set_hex() for "get addr" and "get size"
The 'fdt get addr' and 'env get size' is always assumed to be hex
value, drop the prefix, and outright switch to env_set_hex(). Since
this might break existing users who depend on the existing behavior
with 0x prefix, this is a separate patch.
Revert if this breaks anything.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
David Sebek [Thu, 30 Mar 2023 21:51:14 +0000 (17:51 -0400)]
rockchip: Fix incorrect constant name in RAM init code
A condition in the rk3399 RAM initialization code used the old
CONFIG_RAM_RK3399_LPDDR4 constant name. This commit changes the
condition to use the correct CONFIG_RAM_ROCKCHIP_LPDDR4 constant.
Reviewed-by: Simon Glass <sjg@chromium.org>
Roman Kopytin [Mon, 20 Mar 2023 03:28:13 +0000 (03:28 +0000)]
test_vboot.py: include test of fdt_add_pubkey tool
Add test_fdt_add_pubkey test which provides simple functionality test
which contains such steps:
create DTB and FIT files
add keys with fdt_add_pubkey to DTB
sign FIT image
check with fit_check_sign that keys properly added to DTB file
Signed-off-by: Roman Kopytin <Roman.Kopytin@kaspersky.com>
Signed-off-by: Ivan Mikhaylov <fr0st61te@gmail.com>
Cc: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Tom Rini [Sat, 1 Apr 2023 14:55:06 +0000 (10:55 -0400)]
Merge tag 'efi-2023-04-rc6' of https://source.denx.de/u-boot/custodians/u-boot-efi
Pull request for efi-2023-04-rc6
Documentation:
* describe skipping triggering a pipeline in Gitlab
UEFI:
* correct shortening of device-paths for boot options
Heinrich Schuchardt [Sat, 1 Apr 2023 05:21:55 +0000 (07:21 +0200)]
efi_loader: remove duplicate assignment
Assigning the value of a variable to itself should be avoided.
Addresses-Coverity-ID: 451089 ("Evaluation order violation")
Fixes:
180b7118bed8 ("efi_loader: fix device-path for USB devices")
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Heinrich Schuchardt [Sun, 26 Mar 2023 10:22:40 +0000 (12:22 +0200)]
efi_loader: correct shortening of device-paths
We use short device-paths in boot options so that a file on a block device
can be found independent of the port into which the device is plugged.
Usb() device-path nodes only contain port and interface information and
therefore cannot identify a block device.
UsbWwi() device-path nodes contain the serial number of USB devices.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Heinrich Schuchardt [Sun, 26 Mar 2023 02:55:12 +0000 (02:55 +0000)]
doc: describe skipping triggering a pipeline in Gitlab
'git push -o ci.skip' can be used to push to Gitlab without triggering a
pipeline.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Heinrich Schuchardt [Sun, 26 Mar 2023 15:08:03 +0000 (17:08 +0200)]
scsi: typo supporedt
%s/supporedt/supported/
Fixes:
edca8cf72130 ("Convert CONFIG_SCSI_AHCI_PLAT et al to Kconfig")
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tom Rini [Fri, 31 Mar 2023 16:50:34 +0000 (12:50 -0400)]
Merge tag 'u-boot-imx-next-
20230331' of https://gitlab.denx.de/u-boot/custodians/u-boot-imx into next
u-boot-imx-next-
20230331 for next
---------------------------------
CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/15819
i.MX patches queued for next:
- Conversions to DM_SERIAL
- Fixes for Toradex boards
- Gateworks Boards
- i.MX8ULP
- EQoS support / fixes, changes in boards
Tom Rini [Fri, 31 Mar 2023 16:02:41 +0000 (12:02 -0400)]
Merge tag 'dm-pull-31mar23' of https://source.denx.de/u-boot/custodians/u-boot-dm
Fixes for buildman and sysreset
Tom Rini [Fri, 31 Mar 2023 14:04:23 +0000 (10:04 -0400)]
Merge branch '2023-03-30-assorted-general-upates' into next
- RTC cleanups / improvements, run_commandf() cleanups, fs bugfixes,
socrates config fix, PCI MPS support, GPIO improvements, other code
cleanups
Dario Binacchi [Wed, 8 Feb 2023 08:15:39 +0000 (09:15 +0100)]
configs: imx8mn_bsh_smm_s2: remove console from bootargs
The Linux kernel device tree already specifies the device to be used for
boot console output with a stdout-path property under /chosen.
Commit
36b661dc919da ("Merge branch 'next'") re-added the console
setting that commit
bede82f750752 ("configs: imx8mn_bsh_smm_s2: remove
console from bootargs") had previously removed.
Fixes:
36b661dc919da ("Merge branch 'next'")
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Fabio Estevam <festevam@denx.de>
Jonathan Liu [Tue, 28 Mar 2023 06:44:23 +0000 (17:44 +1100)]
sysreset: gpio: fix gpio_reboot_request return value
It should return -EINPROGRESS if successful otherwise sysreset-uclass
will continue to the next sysreset device.
Signed-off-by: Jonathan Liu <net147@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Simon Glass [Mon, 27 Mar 2023 21:47:37 +0000 (10:47 +1300)]
buildman: Correct overwriting of settings file
The toolchain test causes the settings file to be overwritten, which is
annoying for local development. Fix it by passing None as the filename.
Signed-off-by: Simon Glass <sjg@chromium.org>
Stefan Herbrechtsmeier [Wed, 22 Mar 2023 08:46:02 +0000 (09:46 +0100)]
test: fs: Check fat short file name
Ensure that a freshly written fat file with a lower case filename which
fits into the upper case 8.3 short filename is not mangeled with a tilde
and number.
Signed-off-by: Stefan Herbrechtsmeier <stefan.herbrechtsmeier@weidmueller.com>
Svyatoslav Ryhel [Mon, 20 Mar 2023 19:06:30 +0000 (21:06 +0200)]
input: button_kbd: make driver complementary to gpio buttons
Remove need of dts binding for button keyboard since it reuses
gpio-keys binding. Select gpio-keys driver if button keyboard
is selected since button keyboard can not operate on its own.
Tested-by: Svyatoslav Ryhel <clamor95@gmail.com> # HTC One X T30
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Svyatoslav Ryhel [Mon, 20 Mar 2023 19:01:43 +0000 (21:01 +0200)]
cmd: ums: abort mounting by pressing any key
This patch introduses config which allows interrupt run of usb
mass storage with any key. This is especially useful on devices
with limited input capabilities like tablets and smatphones which
have only gpio keys in direct access.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Evgeny Bachinin [Mon, 20 Mar 2023 08:23:14 +0000 (11:23 +0300)]
test: exit: fix run_commandf() warnings
Fix warnings after adding printf-like attribute format for
run_commandf():
warning: too many arguments for format [-Wformat-extra-args]
Signed-off-by: Evgeny Bachinin <EABachinin@sberdevices.ru>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>