review.tizen.org Git - platform/kernel/linux-starfive.git/log

KVM: x86: Don't inhibit APICv/AVIC if xAPIC ID mismatch is due to 32-bit ID

commit f651a008954803d7bb2d85b7042d0fd46133d782 upstream.

Truncate the vcpu_id, a.k.a. x2APIC ID, to an 8-bit value when comparing
it against the xAPIC ID to avoid false positives (sort of) on systems
with >255 CPUs, i.e. with IDs that don't fit into a u8. The intent of
APIC_ID_MODIFIED is to inhibit APICv/AVIC when the xAPIC is changed from
it's original value,

The mismatch isn't technically a false positive, as architecturally the
xAPIC IDs do end up being aliased in this scenario, and neither APICv
nor AVIC correctly handles IPI virtualization when there is aliasing.
However, KVM already deliberately does not honor the aliasing behavior
that results when an x2APIC ID gets truncated to an xAPIC ID. I.e. the
resulting APICv/AVIC behavior is aligned with KVM's existing behavior
when KVM's x2APIC hotplug hack is effectively enabled.

If/when KVM provides a way to disable the hotplug hack, APICv/AVIC can
piggyback whatever logic disables the optimized APIC map (which is what
provides the hotplug hack), i.e. so that KVM's optimized map and APIC
virtualization yield the same behavior.

For now, fix the immediate problem of APIC virtualization being disabled
for large VMs, which is a much more pressing issue than ensuring KVM
honors architectural behavior for APIC ID aliasing.

Fixes: 3743c2f02517 ("KVM: x86: inhibit APICv/AVIC on changes to APIC ID or APIC base")
Reported-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230106011306.85230-7-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: x86: Don't inhibit APICv/AVIC on xAPIC ID "change" if APIC is disabled

commit a58a66afc464d6d2ec294cd3102f36f3652e7ce4 upstream.

Don't inhibit APICv/AVIC due to an xAPIC ID mismatch if the APIC is
hardware disabled. The ID cannot be consumed while the APIC is disabled,
and the ID is guaranteed to be set back to the vcpu_id when the APIC is
hardware enabled (architectural behavior correctly emulated by KVM).

Fixes: 3743c2f02517 ("KVM: x86: inhibit APICv/AVIC on changes to APIC ID or APIC base")
Cc: stable@vger.kernel.org
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230106011306.85230-6-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: x86: Blindly get current x2APIC reg value on "nodecode write" traps

commit 0a19807b464fb10aa79b9dd7f494bc317438fada upstream.

When emulating a x2APIC write in response to an APICv/AVIC trap, get the
the written value from the vAPIC page without checking that reads are
allowed for the target register. AVIC can generate trap-like VM-Exits on
writes to EOI, and so KVM needs to get the written value from the backing
page without running afoul of EOI's write-only behavior.

Alternatively, EOI could be special cased to always write '0', e.g. so
that the sanity check could be preserved, but x2APIC on AMD is actually
supposed to disallow non-zero writes (not emulated by KVM), and the
sanity check was a byproduct of how the KVM code was written, i.e. wasn't
added to guard against anything in particular.

Fixes: 70c8327c11c6 ("KVM: x86: Bug the VM if an accelerated x2APIC trap occurs on a "bad" reg")
Fixes: 1bd9dfec9fd4 ("KVM: x86: Do not block APIC write for non ICR registers")
Reported-by: Alejandro Jimenez <alejandro.j.jimenez@oracle.com>
Cc: stable@vger.kernel.org
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230106011306.85230-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: x86: Purge "highest ISR" cache when updating APICv state

commit 97a71c444a147ae41c7d0ab5b3d855d7f762f3ed upstream.

Purge the "highest ISR" cache when updating APICv state on a vCPU. The
cache must not be used when APICv is active as hardware may emulate EOIs
(and other operations) without exiting to KVM.

This fixes a bug where KVM will effectively block IRQs in perpetuity due
to the "highest ISR" never getting reset if APICv is activated on a vCPU
while an IRQ is in-service. Hardware emulates the EOI and KVM never gets
a chance to update its cache.

Fixes: b26a695a1d78 ("kvm: lapic: Introduce APICv update helper function")
Cc: stable@vger.kernel.org
Cc: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Cc: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230106011306.85230-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: Register /dev/kvm as the _very_ last thing during initialization

commit 2b01281273738bf2d6551da48d65db2df3f28998 upstream.

Register /dev/kvm, i.e. expose KVM to userspace, only after all other
setup has completed. Once /dev/kvm is exposed, userspace can start
invoking KVM ioctls, creating VMs, etc... If userspace creates a VM
before KVM is done with its configuration, bad things may happen, e.g.
KVM will fail to properly migrate vCPU state if a VM is created before
KVM has registered preemption notifiers.

Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221130230934.1014142-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: VMX: Fix crash due to uninitialized current_vmcs

commit 93827a0a36396f2fd6368a54a020f420c8916e9b upstream.

KVM enables 'Enlightened VMCS' and 'Enlightened MSR Bitmap' when running as
a nested hypervisor on top of Hyper-V. When MSR bitmap is updated,
evmcs_touch_msr_bitmap function uses current_vmcs per-cpu variable to mark
that the msr bitmap was changed.

vmx_vcpu_create() modifies the msr bitmap via vmx_disable_intercept_for_msr
-> vmx_msr_bitmap_l01_changed which in the end calls this function. The
function checks for current_vmcs if it is null but the check is
insufficient because current_vmcs is not initialized. Because of this, the
code might incorrectly write to the structure pointed by current_vmcs value
left by another task. Preemption is not disabled, the current task can be
preempted and moved to another CPU while current_vmcs is accessed multiple
times from evmcs_touch_msr_bitmap() which leads to crash.

The manipulation of MSR bitmaps by callers happens only for vmcs01 so the
solution is to use vmx->vmcs01.vmcs instead of current_vmcs.

  BUG: kernel NULL pointer dereference, address: 0000000000000338
  PGD 4e1775067 P4D 0
  Oops: 0002 [#1] PREEMPT SMP NOPTI
  ...
  RIP: 0010:vmx_msr_bitmap_l01_changed+0x39/0x50 [kvm_intel]
  ...
  Call Trace:
   vmx_disable_intercept_for_msr+0x36/0x260 [kvm_intel]
   vmx_vcpu_create+0xe6/0x540 [kvm_intel]
   kvm_arch_vcpu_create+0x1d1/0x2e0 [kvm]
   kvm_vm_ioctl_create_vcpu+0x178/0x430 [kvm]
   kvm_vm_ioctl+0x53f/0x790 [kvm]
   __x64_sys_ioctl+0x8a/0xc0
   do_syscall_64+0x5c/0x90
   entry_SYSCALL_64_after_hwframe+0x63/0xcd

Fixes: ceef7d10dfb6 ("KVM: x86: VMX: hyper-v: Enlightened MSR-Bitmap support")
Cc: stable@vger.kernel.org
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Alexandru Matei <alexandru.matei@uipath.com>
Link: https://lore.kernel.org/r/20230123221208.4964-1-alexandru.matei@uipath.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: Destroy target device if coalesced MMIO unregistration fails

commit b1cb1fac22abf102ffeb29dd3eeca208a3869d54 upstream.

Destroy and free the target coalesced MMIO device if unregistering said
device fails.  As clearly noted in the code, kvm_io_bus_unregister_dev()
does not destroy the target device.

  BUG: memory leak
  unreferenced object 0xffff888112a54880 (size 64):
    comm "syz-executor.2", pid 5258, jiffies 4297861402 (age 14.129s)
    hex dump (first 32 bytes):
      38 c7 67 15 00 c9 ff ff 38 c7 67 15 00 c9 ff ff  8.g.....8.g.....
      e0 c7 e1 83 ff ff ff ff 00 30 67 15 00 c9 ff ff  .........0g.....
    backtrace:
      [<0000000006995a8a>] kmalloc include/linux/slab.h:556 [inline]
      [<0000000006995a8a>] kzalloc include/linux/slab.h:690 [inline]
      [<0000000006995a8a>] kvm_vm_ioctl_register_coalesced_mmio+0x8e/0x3d0 arch/x86/kvm/../../../virt/kvm/coalesced_mmio.c:150
      [<00000000022550c2>] kvm_vm_ioctl+0x47d/0x1600 arch/x86/kvm/../../../virt/kvm/kvm_main.c:3323
      [<000000008a75102f>] vfs_ioctl fs/ioctl.c:46 [inline]
      [<000000008a75102f>] file_ioctl fs/ioctl.c:509 [inline]
      [<000000008a75102f>] do_vfs_ioctl+0xbab/0x1160 fs/ioctl.c:696
      [<0000000080e3f669>] ksys_ioctl+0x76/0xa0 fs/ioctl.c:713
      [<0000000059ef4888>] __do_sys_ioctl fs/ioctl.c:720 [inline]
      [<0000000059ef4888>] __se_sys_ioctl fs/ioctl.c:718 [inline]
      [<0000000059ef4888>] __x64_sys_ioctl+0x6f/0xb0 fs/ioctl.c:718
      [<000000006444fa05>] do_syscall_64+0x9f/0x4e0 arch/x86/entry/common.c:290
      [<000000009a4ed50b>] entry_SYSCALL_64_after_hwframe+0x49/0xbe

  BUG: leak checking failed

Fixes: 5d3c4c79384a ("KVM: Stop looking for coalesced MMIO zones if the bus is destroyed")
Cc: stable@vger.kernel.org
Reported-by: 柳菁峰 <liujingfeng@qianxin.com>
Reported-by: Michal Luczaj <mhal@rbox.co>
Link: https://lore.kernel.org/r/20221219171924.67989-1-seanjc@google.com
Link: https://lore.kernel.org/all/20230118220003.1239032-1-mhal@rbox.co
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

RDMA/siw: Fix user page pinning accounting

[ Upstream commit 65a8fc30fb6722fc25adec6d7dd5b53b0bb85820 ]

To avoid racing with other user memory reservations, immediately
account full amount of pages to be pinned.

Fixes: 2251334dcac9 ("rdma/siw: application buffer management")
Reported-by: Jason Gunthorpe <jgg@nvidia.com>
Suggested-by: Alistair Popple <apopple@nvidia.com>
Reviewed-by: Alistair Popple <apopple@nvidia.com>
Signed-off-by: Bernard Metzler <bmt@zurich.ibm.com>
Link: https://lore.kernel.org/r/20230202101000.402990-1-bmt@zurich.ibm.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

md: don't update recovery_cp when curr_resync is ACTIVE

commit 1d1f25bfda432a6b61bd0205d426226bbbd73504 upstream.

Don't update recovery_cp when curr_resync is MD_RESYNC_ACTIVE, otherwise
md may skip the resync of the first 3 sectors if the resync procedure is
interrupted before the first calling of ->sync_request() as shown below:

md_do_sync thread          control thread
  // setup resync
  mddev->recovery_cp = 0
  j = 0
  mddev->curr_resync = MD_RESYNC_ACTIVE

                             // e.g., set array as idle
                             set_bit(MD_RECOVERY_INTR, &&mddev_recovery)
  // resync loop
  // check INTR before calling sync_request
  !test_bit(MD_RECOVERY_INTR, &mddev->recovery

  // resync interrupted
  // update recovery_cp from 0 to 3
  // the resync of three 3 sectors will be skipped
  mddev->recovery_cp = 3

Fixes: eac58d08d493 ("md: Use enum for overloaded magic numbers used by mddev->curr_resync")
Cc: stable@vger.kernel.org # 6.0+
Signed-off-by: Hou Tao <houtao1@huawei.com>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

udf: Fix file corruption when appending just after end of preallocated extent

commit 36ec52ea038b18a53e198116ef7d7e70c87db046 upstream.

When we append new block just after the end of preallocated extent, the
code in inode_getblk() wrongly determined we're going to use the
preallocated extent which resulted in adding block into a wrong logical
offset in the file. Sequence like this manifests it:

xfs_io -f -c "pwrite 0x2cacf 0xd122" -c "truncate 0x2dd6f" \
-c "pwrite 0x27fd9 0x69a9" -c "pwrite 0x32981 0x7244" <file>

The code that determined the use of preallocated extent is actually
stale because udf_do_extend_file() does not create preallocation anymore
so after calling that function we are sure there's no usable
preallocation. Just remove the faulty condition.

CC: stable@vger.kernel.org
Fixes: 16d055656814 ("udf: Discard preallocation before extending file with a hole")
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

udf: Detect system inodes linked into directory hierarchy

commit 85a37983ec69cc9fcd188bc37c4de15ee326355a upstream.

When UDF filesystem is corrupted, hidden system inodes can be linked
into directory hierarchy which is an avenue for further serious
corruption of the filesystem and kernel confusion as noticed by syzbot
fuzzed images. Refuse to access system inodes linked into directory
hierarchy and vice versa.

CC: stable@vger.kernel.org
Reported-by: syzbot+38695a20b8addcbc1084@syzkaller.appspotmail.com
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

udf: Preserve link count of system files

commit fc8033a34a3ca7d23353e645e6dde5d364ac5f12 upstream.

System files in UDF filesystem have link count 0. To not confuse VFS we
fudge the link count to be 1 when reading such inodes however we forget
to restore the link count of 0 when writing such inodes. Fix that.

CC: stable@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

udf: Do not update file length for failed writes to inline files

commit 256fe4162f8b5a1625b8603ca5f7ff79725bfb47 upstream.

When write to inline file fails (or happens only partly), we still
updated length of inline data as if the whole write succeeded. Fix the
update of length of inline data to happen only if the write succeeds.

Reported-by: syzbot+0937935b993956ba28ab@syzkaller.appspotmail.com
CC: stable@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

udf: Do not bother merging very long extents

commit 53cafe1d6d8ef9f93318e5bfccc0d24f27d41ced upstream.

When merging very long extents we try to push as much length as possible
to the first extent. However this is unnecessarily complicated and not
really worth the trouble. Furthermore there was a bug in the logic
resulting in corrupting extents in the file as syzbot reproducer shows.
So just don't bother with the merging of extents that are too long
together.

CC: stable@vger.kernel.org
Reported-by: syzbot+60f291a24acecb3c2bd5@syzkaller.appspotmail.com
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

udf: Truncate added extents on failed expansion

commit 70bfb3a8d661d4fdc742afc061b88a7f3fc9f500 upstream.

When a file expansion failed because we didn't have enough space for
indirect extents make sure we truncate extents created so far so that we
don't leave extents beyond EOF.

CC: stable@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

selftests/landlock: Test ptrace as much as possible with Yama

commit 8677e555f17f51321d0730b945aeb7d4b95f998f upstream.

Update ptrace tests according to all potential Yama security policies.
This is required to make such tests pass even if Yama is enabled.

Tests are not skipped but they now check both Landlock and Yama boundary
restrictions at run time to keep a maximum test coverage (i.e. positive
and negative testing).

Signed-off-by: Jeff Xu <jeffxu@google.com>
Link: https://lore.kernel.org/r/20230114020306.1407195-2-jeffxu@google.com
Cc: stable@vger.kernel.org
[mic: Add curly braces around EXPECT_EQ() to make it build, and improve
commit message]
Co-developed-by: Mickaël Salaün <mic@digikod.net>
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

selftests/landlock: Skip overlayfs tests when not supported

commit 366617a69e60610912836570546f118006ebc7cb upstream.

overlayfs may be disabled in the kernel configuration, causing related
tests to fail. Check that overlayfs is supported at runtime, so we can
skip layout2_overlay.* accordingly.

Signed-off-by: Jeff Xu <jeffxu@google.com>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230113053229.1281774-2-jeffxu@google.com
[mic: Reword comments and constify variables]
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fs/cramfs/inode.c: initialize file_ra_state

commit 3e35102666f873a135d31a726ac1ec8af4905206 upstream.

file_ra_state_init() assumes that the file_ra_state has been zeroed out.
Fixes a KMSAN used-unintialized issue (at least).

Fixes: cf948cbc35e80 ("cramfs: read_mapping_page() is synchronous")
Reported-by: syzbot <syzbot+8ce7f8308d91e6b8bbe2@syzkaller.appspotmail.com>
Link: https://lkml.kernel.org/r/0000000000008f74e905f56df987@google.com
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Nicolas Pitre <nico@fluxnic.net>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ocfs2: fix non-auto defrag path not working issue

commit 236b9254f8d1edc273ad88b420aa85fbd84f492d upstream.

This fixes three issues on move extents ioctl without auto defrag:

a) In ocfs2_find_victim_alloc_group(), we have to convert bits to block
   first in case of global bitmap.

b) In ocfs2_probe_alloc_group(), when finding enough bits in block
   group bitmap, we have to back off move_len to start pos as well,
   otherwise it may corrupt filesystem.

c) In ocfs2_ioctl_move_extents(), set me_threshold both for non-auto
   and auto defrag paths.  Otherwise it will set move_max_hop to 0 and
   finally cause unexpectedly ENOSPC error.

Currently there are no tools triggering the above issues since
defragfs.ocfs2 enables auto defrag by default.  Tested with manually
changing defragfs.ocfs2 to run non auto defrag path.

Link: https://lkml.kernel.org/r/20230220050526.22020-1-heming.zhao@suse.com
Signed-off-by: Heming Zhao <heming.zhao@suse.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ocfs2: fix defrag path triggering jbd2 ASSERT

commit 60eed1e3d45045623e46944ebc7c42c30a4350f0 upstream.

code path:

ocfs2_ioctl_move_extents
ocfs2_move_extents
  ocfs2_defrag_extent
   __ocfs2_move_extent
    + ocfs2_journal_access_di
    + ocfs2_split_extent  //sub-paths call jbd2_journal_restart
    + ocfs2_journal_dirty //crash by jbs2 ASSERT

crash stacks:

PID: 11297  TASK: ffff974a676dcd00  CPU: 67  COMMAND: "defragfs.ocfs2"
#0 [ffffb25d8dad3900] machine_kexec at ffffffff8386fe01
#1 [ffffb25d8dad3958] __crash_kexec at ffffffff8395959d
#2 [ffffb25d8dad3a20] crash_kexec at ffffffff8395a45d
#3 [ffffb25d8dad3a38] oops_end at ffffffff83836d3f
#4 [ffffb25d8dad3a58] do_trap at ffffffff83833205
#5 [ffffb25d8dad3aa0] do_invalid_op at ffffffff83833aa6
#6 [ffffb25d8dad3ac0] invalid_op at ffffffff84200d18
    [exception RIP: jbd2_journal_dirty_metadata+0x2ba]
    RIP: ffffffffc09ca54a  RSP: ffffb25d8dad3b70  RFLAGS: 00010207
    RAX: 0000000000000000  RBX: ffff9706eedc5248  RCX: 0000000000000000
    RDX: 0000000000000001  RSI: ffff97337029ea28  RDI: ffff9706eedc5250
    RBP: ffff9703c3520200   R8: 000000000f46b0b2   R9: 0000000000000000
    R10: 0000000000000001  R11: 00000001000000fe  R12: ffff97337029ea28
    R13: 0000000000000000  R14: ffff9703de59bf60  R15: ffff9706eedc5250
    ORIG_RAX: ffffffffffffffff  CS: 0010  SS: 0018
#7 [ffffb25d8dad3ba8] ocfs2_journal_dirty at ffffffffc137fb95 [ocfs2]
#8 [ffffb25d8dad3be8] __ocfs2_move_extent at ffffffffc139a950 [ocfs2]
#9 [ffffb25d8dad3c80] ocfs2_defrag_extent at ffffffffc139b2d2 [ocfs2]

Analysis

This bug has the same root cause of 'commit 7f27ec978b0e ("ocfs2: call
ocfs2_journal_access_di() before ocfs2_journal_dirty() in
ocfs2_write_end_nolock()")'.  For this bug, jbd2_journal_restart() is
called by ocfs2_split_extent() during defragmenting.

How to fix

For ocfs2_split_extent() can handle journal operations totally by itself.
Caller doesn't need to call journal access/dirty pair, and caller only
needs to call journal start/stop pair.  The fix method is to remove
journal access/dirty from __ocfs2_move_extent().

The discussion for this patch:
https://oss.oracle.com/pipermail/ocfs2-devel/2023-February/000647.html

Link: https://lkml.kernel.org/r/20230217003717.32469-1-heming.zhao@suse.com
Signed-off-by: Heming Zhao <heming.zhao@suse.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

f2fs: fix kernel crash due to null io->bio

commit 267c159f9c7bcb7009dae16889b880c5ed8759a8 upstream.

We should return when io->bio is null before doing anything. Otherwise, panic.

BUG: kernel NULL pointer dereference, address: 0000000000000010
RIP: 0010:__submit_merged_write_cond+0x164/0x240 [f2fs]
Call Trace:
<TASK>
f2fs_submit_merged_write+0x1d/0x30 [f2fs]
commit_checkpoint+0x110/0x1e0 [f2fs]
f2fs_write_checkpoint+0x9f7/0xf00 [f2fs]
? __pfx_issue_checkpoint_thread+0x10/0x10 [f2fs]
__checkpoint_and_complete_reqs+0x84/0x190 [f2fs]
? preempt_count_add+0x82/0xc0
? __pfx_issue_checkpoint_thread+0x10/0x10 [f2fs]
issue_checkpoint_thread+0x4c/0xf0 [f2fs]
? __pfx_autoremove_wake_function+0x10/0x10
kthread+0xff/0x130
? __pfx_kthread+0x10/0x10
ret_from_fork+0x2c/0x50
</TASK>

Cc: stable@vger.kernel.org # v5.18+
Fixes: 64bf0eef0171 ("f2fs: pass the bio operation to bio_alloc_bioset")
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

f2fs: fix cgroup writeback accounting with fs-layer encryption

commit 844545c51a5b2a524b22a2fe9d0b353b827d24b4 upstream.

When writing a page from an encrypted file that is using
filesystem-layer encryption (not inline encryption), f2fs encrypts the
pagecache page into a bounce page, then writes the bounce page.

It also passes the bounce page to wbc_account_cgroup_owner(). That's
incorrect, because the bounce page is a newly allocated temporary page
that doesn't have the memory cgroup of the original pagecache page.
This makes wbc_account_cgroup_owner() not account the I/O to the owner
of the pagecache page as it should.

Fix this by always passing the pagecache page to
wbc_account_cgroup_owner().

Fixes: 578c647879f7 ("f2fs: implement cgroup writeback support")
Cc: stable@vger.kernel.org
Reported-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

f2fs: retry to update the inode page given data corruption

commit 3aa51c61cb4a4dcb40df51ac61171e9ac5a35321 upstream.

If the storage gives a corrupted node block due to short power failure and
reset, f2fs stops the entire operations by setting the checkpoint failure flag.

Let's give more chances to live by re-issuing IOs for a while in such critical
path.

Cc: stable@vger.kernel.org
Suggested-by: Randall Huang <huangrandall@google.com>
Suggested-by: Chao Yu <chao@kernel.org>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

f2fs: fix information leak in f2fs_move_inline_dirents()

commit 9a5571cff4ffcfc24847df9fd545cc5799ac0ee5 upstream.

When converting an inline directory to a regular one, f2fs is leaking
uninitialized memory to disk because it doesn't initialize the entire
directory block. Fix this by zero-initializing the block.

This bug was introduced by commit 4ec17d688d74 ("f2fs: avoid unneeded
initializing when converting inline dentry"), which didn't consider the
security implications of leaking uninitialized memory to disk.

This was found by running xfstest generic/435 on a KMSAN-enabled kernel.

Fixes: 4ec17d688d74 ("f2fs: avoid unneeded initializing when converting inline dentry")
Cc: <stable@vger.kernel.org> # v4.3+
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fs: dlm: send FIN ack back in right cases

commit 00908b3388255fc1d3782b744d07f327712f401f upstream.

This patch moves to send a ack back for receiving a FIN message only
when we are in valid states. In other cases and there might be a sender
waiting for a ack we just let it timeout at the senders time and
hopefully all other cleanups will remove the FIN message on their
sending queue. As an example we should never send out an ACK being in
LAST_ACK state or we cannot assume a working socket communication when
we are in CLOSED state.

Cc: stable@vger.kernel.org
Fixes: 489d8e559c65 ("fs: dlm: add reliable connection if reconnect")
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fs: dlm: move sending fin message into state change handling

commit a58496361802070996f9bd76e941d109c4a85ebd upstream.

This patch moves the send fin handling, which should appear in a specific
state change, into the state change handling while the per node
state_lock is held. I experienced issues with other messages because
we changed the state and a fin message was sent out in a different state.

Cc: stable@vger.kernel.org
Fixes: 489d8e559c65 ("fs: dlm: add reliable connection if reconnect")
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fs: dlm: don't set stop rx flag after node reset

commit 15c63db8e86a72e0d5cfb9bf0cd1870e39a3e5fe upstream.

Similar to the stop tx flag, the rx flag should warn about a dlm message
being received at DLM_FIN state change, when we are assuming no other
dlm application messages. If we receive a FIN message and we are in the
state DLM_FIN_WAIT2 we call midcomms_node_reset() which puts the
midcomms node into DLM_CLOSED state. Afterwards we should not set the
DLM_NODE_FLAG_STOP_RX flag any more. This patch changes the setting
DLM_NODE_FLAG_STOP_RX in those state changes when we receive a FIN
message and we assume there will be no other dlm application messages
received until we hit DLM_CLOSED state.

Cc: stable@vger.kernel.org
Fixes: 489d8e559c65 ("fs: dlm: add reliable connection if reconnect")
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

exfat: fix inode->i_blocks for non-512 byte sector size device

commit 39c1ce8eafc0ff64fb9e28536ccc7df6a8e2999d upstream.

inode->i_blocks is not real number of blocks, but 512 byte ones.

Fixes: 98d917047e8b ("exfat: add file operations")
Cc: stable@vger.kernel.org # v5.7+
Reported-by: Wang Yugui <wangyugui@e16-tech.com>
Tested-by: Wang Yugui <wangyugui@e16-tech.com>
Signed-off-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Reviewed-by: Andy Wu <Andy.Wu@sony.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

exfat: redefine DIR_DELETED as the bad cluster number

commit bdaadfd343e3cba49ad0b009ff4b148dad0fa404 upstream.

When a file or a directory is deleted, the hint for the cluster of
its parent directory in its in-memory inode is set as DIR_DELETED.
Therefore, DIR_DELETED must be one of invalid cluster numbers. According
to the exFAT specification, a volume can have at most 2^32-11 clusters.
However, DIR_DELETED is wrongly defined as 0xFFFF0321, which could be
a valid cluster number. To fix it, let's redefine DIR_DELETED as
0xFFFFFFF7, the bad cluster number.

Fixes: 1acf1a564b60 ("exfat: add in-memory and on-disk structures and headers")
Cc: stable@vger.kernel.org # v5.7+
Reported-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Signed-off-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

exfat: fix unexpected EOF while reading dir

commit 6cb5d1a16a51d080fbc1649a5144cbc5ca7d6f88 upstream.

If the position is not aligned with the dentry size, the return
value of readdir() will be NULL and errno is 0, which means the
end of the directory stream is reached.

If the position is aligned with dentry size, but there is no file
or directory at the position, exfat_readdir() will continue to
get dentry from the next dentry. So the dentry gotten by readdir()
may not be at the position.

After this commit, if the position is not aligned with the dentry
size, round the position up to the dentry size and continue to get
the dentry.

Fixes: ca06197382bd ("exfat: add directory operations")
Cc: stable@vger.kernel.org # v5.7+
Reported-by: Wang Yugui <wangyugui@e16-tech.com>
Signed-off-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Reviewed-by: Andy Wu <Andy.Wu@sony.com>
Reviewed-by: Aoyama Wataru <wataru.aoyama@sony.com>
Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

exfat: fix reporting fs error when reading dir beyond EOF

commit 706fdcac002316893434d753be8cfb549fe1d40d upstream.

Since seekdir() does not check whether the position is valid, the
position may exceed the size of the directory. We found that for
a directory with discontinuous clusters, if the position exceeds
the size of the directory and the excess size is greater than or
equal to the cluster size, exfat_readdir() will return -EIO,
causing a file system error and making the file system unavailable.

Reproduce this bug by:

seekdir(dir, dir_size + cluster_size);
dirent = readdir(dir);

The following log will be printed if mount with 'errors=remount-ro'.

[11166.712896] exFAT-fs (sdb1): error, invalid access to FAT (entry 0xffffffff)
[11166.712905] exFAT-fs (sdb1): Filesystem has been set read-only

Fixes: 1e5654de0f51 ("exfat: handle wrong stream entry size in exfat_readdir()")
Cc: stable@vger.kernel.org # v5.7+
Signed-off-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Reviewed-by: Andy Wu <Andy.Wu@sony.com>
Reviewed-by: Aoyama Wataru <wataru.aoyama@sony.com>
Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fs: hfsplus: fix UAF issue in hfsplus_put_super

commit 07db5e247ab5858439b14dd7cc1fe538b9efcf32 upstream.

The current hfsplus_put_super first calls hfs_btree_close on
sbi->ext_tree, then invokes iput on sbi->hidden_dir, resulting in an
use-after-free issue in hfsplus_release_folio.

As shown in hfsplus_fill_super, the error handling code also calls iput
before hfs_btree_close.

To fix this error, we move all iput calls before hfsplus_btree_close.

Note that this patch is tested on Syzbot.

Link: https://lkml.kernel.org/r/20230226124948.3175736-1-mudongliangabcd@gmail.com
Reported-by: syzbot+57e3e98f7e3b80f64d56@syzkaller.appspotmail.com
Tested-by: Dongliang Mu <mudongliangabcd@gmail.com>
Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hfs: fix missing hfs_bnode_get() in __hfs_bnode_create

commit a9dc087fd3c484fd1ed18c5efb290efaaf44ce03 upstream.

Syzbot found a kernel BUG in hfs_bnode_put():

kernel BUG at fs/hfs/bnode.c:466!
invalid opcode: 0000 [#1] PREEMPT SMP KASAN
CPU: 0 PID: 3634 Comm: kworker/u4:5 Not tainted 6.1.0-rc7-syzkaller-00190-g97ee9d1c1696 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/26/2022
Workqueue: writeback wb_workfn (flush-7:0)
RIP: 0010:hfs_bnode_put+0x46f/0x480 fs/hfs/bnode.c:466
Code: 8a 80 ff e9 73 fe ff ff 89 d9 80 e1 07 80 c1 03 38 c1 0f 8c a0 fe ff ff 48 89 df e8 db 8a 80 ff e9 93 fe ff ff e8 a1 68 2c ff <0f> 0b e8 9a 68 2c ff 0f 0b 0f 1f 84 00 00 00 00 00 55 41 57 41 56
RSP: 0018:ffffc90003b4f258 EFLAGS: 00010293
RAX: ffffffff825e318f RBX: 0000000000000000 RCX: ffff8880739dd7c0
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
RBP: ffffc90003b4f430 R08: ffffffff825e2d9b R09: ffffed10045157d1
R10: ffffed10045157d1 R11: 1ffff110045157d0 R12: ffff8880228abe80
R13: ffff88807016c000 R14: dffffc0000000000 R15: ffff8880228abe00
FS:  0000000000000000(0000) GS:ffff8880b9800000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fa6ebe88718 CR3: 000000001e93d000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
  <TASK>
  hfs_write_inode+0x1bc/0xb40
  write_inode fs/fs-writeback.c:1440 [inline]
  __writeback_single_inode+0x4d6/0x670 fs/fs-writeback.c:1652
  writeback_sb_inodes+0xb3b/0x18f0 fs/fs-writeback.c:1878
  __writeback_inodes_wb+0x125/0x420 fs/fs-writeback.c:1949
  wb_writeback+0x440/0x7b0 fs/fs-writeback.c:2054
  wb_check_start_all fs/fs-writeback.c:2176 [inline]
  wb_do_writeback fs/fs-writeback.c:2202 [inline]
  wb_workfn+0x827/0xef0 fs/fs-writeback.c:2235
  process_one_work+0x877/0xdb0 kernel/workqueue.c:2289
  worker_thread+0xb14/0x1330 kernel/workqueue.c:2436
  kthread+0x266/0x300 kernel/kthread.c:376
  ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:306
  </TASK>

The BUG_ON() is triggered at here:

/* Dispose of resources used by a node */
void hfs_bnode_put(struct hfs_bnode *node)
{
if (node) {
<skipped>
BUG_ON(!atomic_read(&node->refcnt)); <- we have issue here!!!!
<skipped>
}
}

By tracing the refcnt, I found the node is created by hfs_bmap_alloc()
with refcnt 1.  Then the node is used by hfs_btree_write().  There is a
missing of hfs_bnode_get() after find the node.  The issue happened in
following path:

<alloc>
hfs_bmap_alloc
   hfs_bnode_find
     __hfs_bnode_create   <- allocate a new node with refcnt 1.
   hfs_bnode_put          <- decrease the refcnt

<write>
hfs_btree_write
   hfs_bnode_find
     __hfs_bnode_create
       hfs_bnode_findhash <- find the node without refcnt increased.
   hfs_bnode_put   <- trigger the BUG_ON() since refcnt is 0.

Link: https://lkml.kernel.org/r/20221212021627.3766829-1-liushixin2@huawei.com
Reported-by: syzbot+5b04b49a7ec7226c7426@syzkaller.appspotmail.com
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Cc: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Cc: Viacheslav Dubeyko <slava@dubeyko.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

io_uring: mark task TASK_RUNNING before handling resume/task work

commit 2f2bb1ffc9983e227424d0787289da5483b0c74f upstream.

Just like for task_work, set the task mode to TASK_RUNNING before doing
any potential resume work. We're not holding any locks at this point,
but we may have already set the task state to TASK_INTERRUPTIBLE in
preparation for going to sleep waiting for events. Ensure that we set it
back to TASK_RUNNING if we have work to process, to avoid warnings on
calling blocking operations with !TASK_RUNNING.

Fixes: b5d3ae202fbf ("io_uring: handle TIF_NOTIFY_RESUME when checking for task_work")
Reported-by: kernel test robot <oliver.sang@intel.com>
Link: https://lore.kernel.org/oe-lkp/202302062208.24d3e563-oliver.sang@intel.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: dts: exynos: correct HDMI phy compatible in Exynos4

commit af1c89ddb74f170eccd5a57001d7317560b638ea upstream.

The HDMI phy compatible was missing vendor prefix.

Fixes: ed80d4cab772 ("ARM: dts: add hdmi related nodes for exynos4 SoCs")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230125094513.155063-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

torture: Fix hang during kthread shutdown phase

commit d52d3a2bf408ff86f3a79560b5cce80efb340239 upstream.

During rcutorture shutdown, the rcu_torture_cleanup() function calls
torture_cleanup_begin(), which sets the fullstop global variable to
FULLSTOP_RMMOD. This causes the rcutorture threads for readers and
fakewriters to exit all of their "while" loops and start shutting down.

They then call torture_kthread_stopping(), which in turn waits for
kthread_stop() to be called.  However, rcu_torture_cleanup() has
not yet called kthread_stop() on those threads, and before it gets a
chance to do so, multiple instances of torture_kthread_stopping() invoke
schedule_timeout_interruptible(1) in a tight loop.  Tracing confirms that
TIMER_SOFTIRQ can then continuously execute timer callbacks.  If that
TIMER_SOFTIRQ preempts the task executing rcu_torture_cleanup(), that
task might never invoke kthread_stop().

This commit improves this situation by increasing the timeout passed to
schedule_timeout_interruptible() from one jiffy to 1/20th of a second.
This change prevents TIMER_SOFTIRQ from monopolizing its CPU, thus
allowing rcu_torture_cleanup() to carry out the needed kthread_stop()
invocations.  Testing has shown 100 runs of TREE07 passing reliably,
as oppose to the tens-of-percent failure rates seen beforehand.

Cc: Paul McKenney <paulmck@kernel.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Zhouyi Zhou <zhouzhouyi@gmail.com>
Cc: <stable@vger.kernel.org> # 6.0.x
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Tested-by: Zhouyi Zhou <zhouzhouyi@gmail.com>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ksmbd: fix possible memory leak in smb2_lock()

commit d3ca9f7aeba793d74361d88a8800b2f205c9236b upstream.

argv needs to be free when setup_async_work fails or when the current
process is woken up.

Fixes: e2f34481b24d ("cifsd: add server-side procedures for SMB3")
Cc: stable@vger.kernel.org
Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ksmbd: do not allow the actual frame length to be smaller than the rfc1002 length

commit fb533473d1595fe79ecb528fda1de33552b07178 upstream.

ksmbd allowed the actual frame length to be smaller than the rfc1002
length. If allowed, it is possible to allocates a large amount of memory
that can be limited by credit management and can eventually cause memory
exhaustion problem. This patch do not allow it except SMB2 Negotiate
request which will be validated when message handling proceeds.
Also, Allow a message that padded to 8byte boundary.

Fixes: e2f34481b24d ("cifsd: add server-side procedures for SMB3")
Cc: stable@vger.kernel.org
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ksmbd: fix wrong data area length for smb2 lock request

commit 8f8c43b125882ac14372f8dca0c8e50a59e78d79 upstream.

When turning debug mode on, The following error message from
ksmbd_smb2_check_message() is coming.

ksmbd: cli req padded more than expected. Length 112 not 88 for cmd:10 mid:14

data area length calculation for smb2 lock request in smb2_get_data_area_len() is
incorrect.

Fixes: e2f34481b24d ("cifsd: add server-side procedures for SMB3")
Cc: stable@vger.kernel.org
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

locking/rwsem: Prevent non-first waiter from spinning in down_write() slowpath

commit b613c7f31476c44316bfac1af7cac714b7d6bef9 upstream.

A non-first waiter can potentially spin in the for loop of
rwsem_down_write_slowpath() without sleeping but fail to acquire the
lock even if the rwsem is free if the following sequence happens:

  Non-first RT waiter    First waiter      Lock holder
  -------------------    ------------      -----------
  Acquire wait_lock
  rwsem_try_write_lock():
    Set handoff bit if RT or
      wait too long
    Set waiter->handoff_set
  Release wait_lock
                         Acquire wait_lock
                         Inherit waiter->handoff_set
                         Release wait_lock
   Clear owner
                                           Release lock
  if (waiter.handoff_set) {
    rwsem_spin_on_owner(();
    if (OWNER_NULL)
      goto trylock_again;
  }
  trylock_again:
  Acquire wait_lock
  rwsem_try_write_lock():
     if (first->handoff_set && (waiter != first))
return false;
  Release wait_lock

A non-first waiter cannot really acquire the rwsem even if it mistakenly
believes that it can spin on OWNER_NULL value. If that waiter happens
to be an RT task running on the same CPU as the first waiter, it can
block the first waiter from acquiring the rwsem leading to live lock.
Fix this problem by making sure that a non-first waiter cannot spin in
the slowpath loop without sleeping.

Fixes: d257cc8cb8d5 ("locking/rwsem: Make handoff bit handling more consistent")
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Mukesh Ojha <quic_mojha@quicinc.com>
Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230126003628.365092-2-longman@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: hold block group refcount during async discard

commit 2b5463fcbdfb24e898916bcae2b1359042d26963 upstream.

Async discard does not acquire the block group reference count while it
holds a reference on the discard list. This is generally OK, as the
paths which destroy block groups tend to try to synchronize on
cancelling async discard work. However, relying on cancelling work
requires careful analysis to be sure it is safe from races with
unpinning scheduling more work.

While I am unable to find a race with unpinning in the current code for
either the unused bgs or relocation paths, I believe we have one in an
older version of auto relocation in a Meta internal build. This suggests
that this is in fact an error prone model, and could be fragile to
future changes to these bg deletion paths.

To make this ownership more clear, add a refcount for async discard. If
work is queued for a block group, its refcount should be incremented,
and when work is completed or canceled, it should be decremented.

CC: stable@vger.kernel.org # 5.15+
Signed-off-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: mpi3mr: Remove unnecessary memcpy() to alltgt_info->dmi

commit eeb270aee3e085411399f129fc14fa04bd6d83cf upstream.

In the function mpi3mr_get_all_tgt_info(), devmap_info points to
alltgt_info->dmi then there is no need to memcpy() data from devmap_info to
alltgt_info->dmi. Remove the unnecessary memcpy(). This also allows to
remove the local variable 'rval' and the goto label 'out'.

Link: https://lore.kernel.org/r/20230214005019.1897251-3-shinichiro.kawasaki@wdc.com
Cc: stable@vger.kernel.org
Fixes: f5e6d5a34376 ("scsi: mpi3mr: Add support for driver commands")
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Acked-by: Sathya Prakash Veerichetty <sathya.prakash@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: mpi3mr: Fix issues in mpi3mr_get_all_tgt_info()

commit fb428a2005fc1260d18b989cc5199f281617f44d upstream.

The function mpi3mr_get_all_tgt_info() has four issues:

1) It calculates valid entry length in alltgt_info assuming the header part
   of the struct mpi3mr_device_map_info would equal to sizeof(u32).  The
   correct size is sizeof(u64).

2) When it calculates the valid entry length kern_entrylen, it excludes one
   entry by subtracting 1 from num_devices.

3) It copies num_device by calling memcpy(). Substitution is enough.

4) It does not specify the calculated length to sg_copy_from_buffer().
   Instead, it specifies the payload length which is larger than the
   alltgt_info size. It causes "BUG: KASAN: slab-out-of-bounds".

Fix the issues by using the correct header size, removing the subtraction
from num_devices, replacing the memcpy() with substitution and specifying
the correct length to sg_copy_from_buffer().

Link: https://lore.kernel.org/r/20230214005019.1897251-2-shinichiro.kawasaki@wdc.com
Cc: stable@vger.kernel.org
Fixes: f5e6d5a34376 ("scsi: mpi3mr: Add support for driver commands")
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Acked-by: Sathya Prakash Veerichetty <sathya.prakash@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: mpi3mr: Fix missing mrioc->evtack_cmds initialization

commit e39ea831ebad4ab15c4748cb62a397a8abcca36e upstream.

Commit c1af985d27da ("scsi: mpi3mr: Add Event acknowledgment logic")
introduced an array mrioc->evtack_cmds but initialization of the array
elements was missed. They are just zero cleared. The function
mpi3mr_complete_evt_ack() refers host_tag field of the elements. Due to the
zero value of the host_tag field, the function calls clear_bit() for
mrico->evtack_cmds_bitmap with wrong bit index. This results in memory
access to invalid address and "BUG: KASAN: use-after-free". This BUG was
observed at eHBA-9600 firmware update to version 8.3.1.0. To fix it, add
the missing initialization of mrioc->evtack_cmds.

Link: https://lore.kernel.org/r/20230214005019.1897251-5-shinichiro.kawasaki@wdc.com
Cc: stable@vger.kernel.org
Fixes: c1af985d27da ("scsi: mpi3mr: Add Event acknowledgment logic")
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Sathya Prakash Veerichetty <sathya.prakash@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cifs: return a single-use cfid if we did not get a lease

commit 8e843bf38f7be0766642a91523cfa65f2b021a8a upstream.

If we did not get a lease we can still return a single use cfid to the caller.
The cfid will not have has_lease set and will thus not be shared with any
other concurrent users and will be freed immediately when the caller
drops the handle.

This avoids extra roundtrips for servers that do not support directory leases
where they would first fail to get a cfid with a lease and then fallback
to try a normal SMB2_open()

Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Cc: stable@vger.kernel.org
Reviewed-by: Bharath SM <bharathsm@microsoft.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cifs: Check the lease context if we actually got a lease

commit 66d45ca1350a3bb8d5f4db8879ccad3ed492337a upstream.

Some servers may return that we got a lease in rsp->OplockLevel
but then in the lease context contradict this and say we got no lease
at all. Thus we need to check the context if we have a lease.
Additionally, If we do not get a lease we need to make sure we close
the handle before we return an error to the caller.

Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Cc: stable@vger.kernel.org
Reviewed-by: Bharath SM <bharathsm@microsoft.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cifs: don't try to use rdma offload on encrypted connections

commit 3891f6c7655a39065e44980f51ba46bb32be3133 upstream.

The aim of using encryption on a connection is to keep
the data confidential, so we must not use plaintext rdma offload
for that data!

It seems that current windows servers and ksmbd would allow
this, but that's no reason to expose the users data in plaintext!
And servers hopefully reject this in future.

Note modern windows servers support signed or encrypted offload,
see MS-SMB2 2.2.3.1.6 SMB2_RDMA_TRANSFORM_CAPABILITIES, but we don't
support that yet.

Signed-off-by: Stefan Metzmacher <metze@samba.org>
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Long Li <longli@microsoft.com>
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: David Howells <dhowells@redhat.com>
Cc: linux-cifs@vger.kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cifs: split out smb3_use_rdma_offload() helper

commit a6559cc1d35d3eeafb0296aca347b2f745a28a74 upstream.

We should have the logic to decide if we want rdma offload
in a single spot in order to advance it in future.

Signed-off-by: Stefan Metzmacher <metze@samba.org>
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Long Li <longli@microsoft.com>
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: David Howells <dhowells@redhat.com>
Cc: linux-cifs@vger.kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cifs: introduce cifs_io_parms in smb2_async_writev()

commit d643a8a446fc46c06837d08a056f69da2ff16025 upstream.

This will simplify the following changes and makes it easy to get
in passed in from the caller in future.

Signed-off-by: Stefan Metzmacher <metze@samba.org>
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Long Li <longli@microsoft.com>
Cc: Namjae Jeon <linkinjeon@kernel.org>
Cc: David Howells <dhowells@redhat.com>
Cc: linux-cifs@vger.kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cifs: fix mount on old smb servers

commit d99e86ebde2d7b3a04190f8d14de5bf6814bf10f upstream.

The client was sending rfc1002 session request packet with a wrong
length field set, therefore failing to mount shares against old SMB
servers over port 139.

Fix this by calculating the correct length as specified in rfc1002.

Fixes: d7173623bf0b ("cifs: use ALIGN() and round_up() macros")
Cc: stable@vger.kernel.org
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cifs: Fix uninitialized memory reads for oparms.mode

commit de036dcaca65cf94bf7ff09c571c077f02bc92b4 upstream.

Use a struct assignment with implicit member initialization

Signed-off-by: Volker Lendecke <vl@samba.org>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cifs: Fix uninitialized memory read in smb3_qfs_tcon()

commit d447e794a37288ec7a080aa1b044a8d9deebbab7 upstream.

oparms was not fully initialized

Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: s390: disable migration mode when dirty tracking is disabled

commit f2d3155e2a6bac44d16f04415a321e8707d895c6 upstream.

Migration mode is a VM attribute which enables tracking of changes in
storage attributes (PGSTE). It assumes dirty tracking is enabled on all
memslots to keep a dirty bitmap of pages with changed storage attributes.

When enabling migration mode, we currently check that dirty tracking is
enabled for all memslots. However, userspace can disable dirty tracking
without disabling migration mode.

Since migration mode is pointless with dirty tracking disabled, disable
migration mode whenever userspace disables dirty tracking on any slot.

Also update the documentation to clarify that dirty tracking must be
enabled when enabling migration mode, which is already enforced by the
code in kvm_s390_vm_start_migration().

Also highlight in the documentation for KVM_S390_GET_CMMA_BITS that it
can now fail with -EINVAL when dirty tracking is disabled while
migration mode is on. Move all the error codes to a table so this stays
readable.

To disable migration mode, slots_lock should be held, which is taken
in kvm_set_memory_region() and thus held in
kvm_arch_prepare_memory_region().

Restructure the prepare code a bit so all the sanity checking is done
before disabling migration mode. This ensures migration mode isn't
disabled when some sanity check fails.

Cc: stable@vger.kernel.org
Fixes: 190df4a212a7 ("KVM: s390: CMMA tracking, ESSA emulation, migration mode")
Signed-off-by: Nico Boehr <nrb@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Link: https://lore.kernel.org/r/20230127140532.230651-2-nrb@linux.ibm.com
Message-Id: <20230127140532.230651-2-nrb@linux.ibm.com>
[frankja@linux.ibm.com: fixed commit message typo, moved api.rst error table upwards]
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/kprobes: fix current_kprobe never cleared after kprobes reenter

commit cd57953936f2213dfaccce10d20f396956222c7d upstream.

Recent test_kprobe_missed kprobes kunit test uncovers the following
problem. Once kprobe is triggered from another kprobe (kprobe reenter),
all future kprobes on this cpu are considered as kprobe reenter, thus
pre_handler and post_handler are not being called and kprobes are counted
as "missed".

Commit b9599798f953 ("[S390] kprobes: activation and deactivation")
introduced a simpler scheme for kprobes (de)activation and status
tracking by using push_kprobe/pop_kprobe, which supposed to work for
both initial kprobe entry as well as kprobe reentry and helps to avoid
handling those two cases differently. The problem is that a sequence of
calls in case of kprobes reenter:
push_kprobe() <- NULL (current_kprobe)
push_kprobe() <- kprobe1 (current_kprobe)
pop_kprobe() -> kprobe1 (current_kprobe)
pop_kprobe() -> kprobe1 (current_kprobe)
leaves "kprobe1" as "current_kprobe" on this cpu, instead of setting it
to NULL. In fact push_kprobe/pop_kprobe can only store a single state
(there is just one prev_kprobe in kprobe_ctlblk). Which is a hack but
sufficient, there is no need to have another prev_kprobe just to store
NULL. To make a simple and backportable fix simply reset "prev_kprobe"
when kprobe is poped from this "stack". No need to worry about
"kprobe_status" in this case, because its value is only checked when
current_kprobe != NULL.

Cc: stable@vger.kernel.org
Fixes: b9599798f953 ("[S390] kprobes: activation and deactivation")
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/kprobes: fix irq mask clobbering on kprobe reenter from post_handler

commit 42e19e6f04984088b6f9f0507c4c89a8152d9730 upstream.

Recent test_kprobe_missed kprobes kunit test uncovers the following error
(reported when CONFIG_DEBUG_ATOMIC_SLEEP is enabled):

BUG: sleeping function called from invalid context at kernel/locking/mutex.c:580
in_atomic(): 0, irqs_disabled(): 1, non_block: 0, pid: 662, name: kunit_try_catch
preempt_count: 0, expected: 0
RCU nest depth: 0, expected: 0
no locks held by kunit_try_catch/662.
irq event stamp: 280
hardirqs last  enabled at (279): [<00000003e60a3d42>] __do_pgm_check+0x17a/0x1c0
hardirqs last disabled at (280): [<00000003e3bd774a>] kprobe_exceptions_notify+0x27a/0x318
softirqs last  enabled at (0): [<00000003e3c5c890>] copy_process+0x14a8/0x4c80
softirqs last disabled at (0): [<0000000000000000>] 0x0
CPU: 46 PID: 662 Comm: kunit_try_catch Tainted: G                 N 6.2.0-173644-g44c18d77f0c0 #2
Hardware name: IBM 3931 A01 704 (LPAR)
Call Trace:
[<00000003e60a3a00>] dump_stack_lvl+0x120/0x198
[<00000003e3d02e82>] __might_resched+0x60a/0x668
[<00000003e60b9908>] __mutex_lock+0xc0/0x14e0
[<00000003e60bad5a>] mutex_lock_nested+0x32/0x40
[<00000003e3f7b460>] unregister_kprobe+0x30/0xd8
[<00000003e51b2602>] test_kprobe_missed+0xf2/0x268
[<00000003e51b5406>] kunit_try_run_case+0x10e/0x290
[<00000003e51b7dfa>] kunit_generic_run_threadfn_adapter+0x62/0xb8
[<00000003e3ce30f8>] kthread+0x2d0/0x398
[<00000003e3b96afa>] __ret_from_fork+0x8a/0xe8
[<00000003e60ccada>] ret_from_fork+0xa/0x40

The reason for this error report is that kprobes handling code failed
to restore irqs.

The problem is that when kprobe is triggered from another kprobe
post_handler current sequence of enable_singlestep / disable_singlestep
is the following:
enable_singlestep  <- original kprobe (saves kprobe_saved_imask)
enable_singlestep  <- kprobe triggered from post_handler (clobbers kprobe_saved_imask)
disable_singlestep <- kprobe triggered from post_handler (restores kprobe_saved_imask)
disable_singlestep <- original kprobe (restores wrong clobbered kprobe_saved_imask)

There is just one kprobe_ctlblk per cpu and both calls saves and
loads irq mask to kprobe_saved_imask. To fix the problem simply move
resume_execution (which calls disable_singlestep) before calling
post_handler. This also fixes the problem that post_handler is called
with pt_regs which were not yet adjusted after single-stepping.

Cc: stable@vger.kernel.org
Fixes: 4ba069b802c2 ("[S390] add kprobes support.")
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390: discard .interp section

commit e9c9cb90e76ffaabcc7ca8f275d9e82195fd6367 upstream.

When debugging vmlinux with QEMU + GDB, the following GDB error may
occur:

    (gdb) c
    Continuing.
    Warning:
    Cannot insert breakpoint -1.
    Cannot access memory at address 0xffffffffffff95c0

    Command aborted.
    (gdb)

The reason is that, when .interp section is present, GDB tries to
locate the file specified in it in memory and put a number of
breakpoints there (see enable_break() function in gdb/solib-svr4.c).
Sometimes GDB finds a bogus location that matches its heuristics,
fails to set a breakpoint and stops. This makes further debugging
impossible.

The .interp section contains misleading information anyway (vmlinux
does not need ld.so), so fix by discarding it.

Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/extmem: return correct segment type in __segment_load()

commit 8c42dd78df148c90e48efff204cce38743906a79 upstream.

Commit f05f62d04271f ("s390/vmem: get rid of memory segment list")
reshuffled the call to vmem_add_mapping() in __segment_load(), which now
overwrites rc after it was set to contain the segment type code.

As result, __segment_load() will now always return 0 on success, which
corresponds to the segment type code SEG_TYPE_SW, i.e. a writeable
segment. This results in a kernel crash when loading a read-only segment
as dcssblk block device, and trying to write to it.

Instead of reshuffling code again, make sure to return the segment type
on success, and also describe this rather delicate and unexpected logic
in the function comment. Also initialize new segtype variable with
invalid value, to prevent possible future confusion.

Fixes: f05f62d04271 ("s390/vmem: get rid of memory segment list")
Cc: <stable@vger.kernel.org> # 5.9+
Signed-off-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

io_uring: fix fget leak when fs don't support nowait buffered read

commit 54aa7f2330b82884f4a1afce0220add6e8312f8b upstream.

Heming reported a BUG when using io_uring doing link-cp on ocfs2. [1]

Do the following steps can reproduce this BUG:
mount -t ocfs2 /dev/vdc /mnt/ocfs2
cp testfile /mnt/ocfs2/
./link-cp /mnt/ocfs2/testfile /mnt/ocfs2/testfile.1
umount /mnt/ocfs2

Then umount will fail, and it outputs:
umount: /mnt/ocfs2: target is busy.

While tracing umount, it blames mnt_get_count() not return as expected.
Do a deep investigation for fget()/fput() on related code flow, I've
finally found that fget() leaks since ocfs2 doesn't support nowait
buffered read.

io_issue_sqe
|-io_assign_file  // do fget() first
  |-io_read
  |-io_iter_do_read
    |-ocfs2_file_read_iter  // return -EOPNOTSUPP
  |-kiocb_done
    |-io_rw_done
      |-__io_complete_rw_common  // set REQ_F_REISSUE
    |-io_resubmit_prep
      |-io_req_prep_async  // override req->file, leak happens

This was introduced by commit a196c78b5443 in v5.18. Fix it by don't
re-assign req->file if it has already been assigned.

[1] https://lore.kernel.org/ocfs2-devel/ab580a75-91c8-d68a-3455-40361be1bfa8@linux.alibaba.com/T/#t

Fixes: a196c78b5443 ("io_uring: assign non-fixed early for async work")
Cc: <stable@vger.kernel.org>
Reported-by: Heming Zhao <heming.zhao@suse.com>
Signed-off-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Xiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Link: https://lore.kernel.org/r/20230228045459.13524-1-joseph.qi@linux.alibaba.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

io_uring: remove MSG_NOSIGNAL from recvmsg

commit 7605c43d67face310b4b87dee1a28bc0c8cd8c0f upstream.

MSG_NOSIGNAL is not applicable for the receiving side, SIGPIPE is
generated when trying to write to a "broken pipe". AF_PACKET's
packet_recvmsg() does enforce this, giving back EINVAL when MSG_NOSIGNAL
is set - making it unuseable in io_uring's recvmsg.

Remove MSG_NOSIGNAL from io_recvmsg_prep().

Cc: stable@vger.kernel.org # v5.10+
Signed-off-by: David Lamparter <equinox@diac24.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230224150123.128346-1-equinox@diac24.net
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

io_uring/rsrc: disallow multi-source reg buffers

commit edd478269640b360c6f301f2baa04abdda563ef3 upstream.

If two or more mappings go back to back to each other they can be passed
into io_uring to be registered as a single registered buffer. That would
even work if mappings came from different sources, e.g. it's possible to
mix in this way anon pages and pages from shmem or hugetlb. That is not
a problem but it'd rather be less prone if we forbid such mixing.

Cc: <stable@vger.kernel.org>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

io_uring: add reschedule point to handle_tw_list()

commit f58680085478dd292435727210122960d38e8014 upstream.

If CONFIG_PREEMPT_NONE is set and the task_work chains are long, we
could be running into issues blocking others for too long. Add a
reschedule check in handle_tw_list(), and flush the ctx if we need to
reschedule.

Cc: stable@vger.kernel.org # 5.10+
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

io_uring: add a conditional reschedule to the IOPOLL cancelation loop

commit fcc926bb857949dbfa51a7d95f3f5ebc657f198c upstream.

If the kernel is configured with CONFIG_PREEMPT_NONE, we could be
sitting in a tight loop reaping events but not giving them a chance to
finish. This results in a trace ala:

rcu: INFO: rcu_sched self-detected stall on CPU
rcu: 2-...!: (5249 ticks this GP) idle=935c/1/0x4000000000000000 softirq=4265/4274 fqs=1
(t=5251 jiffies g=465 q=4135 ncpus=4)
rcu: rcu_sched kthread starved for 5249 jiffies! g465 f0x0 RCU_GP_WAIT_FQS(5) ->state=0x0 ->cpu=0
rcu: Unless rcu_sched kthread gets sufficient CPU time, OOM is now expected behavior.
rcu: RCU grace-period kthread stack dump:
task:rcu_sched state:R running task stack:0 pid:12 ppid:2 flags:0x00000008
Call trace:
__switch_to+0xb0/0xc8
__schedule+0x43c/0x520
schedule+0x4c/0x98
schedule_timeout+0xbc/0xdc
rcu_gp_fqs_loop+0x308/0x344
rcu_gp_kthread+0xd8/0xf0
kthread+0xb8/0xc8
ret_from_fork+0x10/0x20
rcu: Stack dump where RCU GP kthread last ran:
Task dump for CPU 0:
task:kworker/u8:10 state:R running task stack:0 pid:89 ppid:2 flags:0x0000000a
Workqueue: events_unbound io_ring_exit_work
Call trace:
__switch_to+0xb0/0xc8
0xffff0000c8fefd28
CPU: 2 PID: 95 Comm: kworker/u8:13 Not tainted 6.2.0-rc5-00042-g40316e337c80-dirty #2759
Hardware name: linux,dummy-virt (DT)
Workqueue: events_unbound io_ring_exit_work
pstate: 61400005 (nZCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--)
pc : io_do_iopoll+0x344/0x360
lr : io_do_iopoll+0xb8/0x360
sp : ffff800009bebc60
x29: ffff800009bebc60 x28: 0000000000000000 x27: 0000000000000000
x26: ffff0000c0f67d48 x25: ffff0000c0f67840 x24: ffff800008950024
x23: 0000000000000001 x22: 0000000000000000 x21: ffff0000c27d3200
x20: ffff0000c0f67840 x19: ffff0000c0f67800 x18: 0000000000000000
x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000
x14: 0000000000000001 x13: 0000000000000001 x12: 0000000000000000
x11: 0000000000000179 x10: 0000000000000870 x9 : ffff800009bebd60
x8 : ffff0000c27d3ad0 x7 : fefefefefefefeff x6 : 0000646e756f626e
x5 : ffff0000c0f67840 x4 : 0000000000000000 x3 : ffff0000c2398000
x2 : 0000000000000000 x1 : 0000000000000000 x0 : 0000000000000000
Call trace:
io_do_iopoll+0x344/0x360
io_uring_try_cancel_requests+0x21c/0x334
io_ring_exit_work+0x90/0x40c
process_one_work+0x1a4/0x254
worker_thread+0x1ec/0x258
kthread+0xb8/0xc8
ret_from_fork+0x10/0x20

Add a cond_resched() in the cancelation IOPOLL loop to fix this.

Cc: stable@vger.kernel.org # 5.10+
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

io_uring: handle TIF_NOTIFY_RESUME when checking for task_work

commit b5d3ae202fbfe055aa2a8ae8524531ee1dcab717 upstream.

If TIF_NOTIFY_RESUME is set, then we need to call resume_user_mode_work()
for PF_IO_WORKER threads. They never return to usermode, hence never get
a chance to process any items that are marked by this flag. Most notably
this includes the final put of files, but also any throttling markers set
by block cgroups.

Cc: stable@vger.kernel.org # 5.10+
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

io_uring: use user visible tail in io_uring_poll()

commit c10bb64684813a326174c3eebcafb3ee5af52ca3 upstream.

We return POLLIN from io_uring_poll() depending on whether there are
CQEs for the userspace, and so we should use the user visible tail
pointer instead of a transient cached value.

Cc: stable@vger.kernel.org
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/228ffcbf30ba98856f66ffdb9a6a60ead1dd96c0.1674484266.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

io_uring: Replace 0-length array with flexible array

commit 36632d062975a9ff4410c90dd6d37922b68d0920 upstream.

Zero-length arrays are deprecated[1]. Replace struct io_uring_buf_ring's
"bufs" with a flexible array member. (How is the size of this array
verified?) Detected with GCC 13, using -fstrict-flex-arrays=3:

In function 'io_ring_buffer_select',
    inlined from 'io_buffer_select' at io_uring/kbuf.c:183:10:
io_uring/kbuf.c:141:23: warning: array subscript 255 is outside the bounds of an interior zero-length array 'struct io_uring_buf[0]' [-Wzero-length-bounds]
  141 |                 buf = &br->bufs[head];
      |                       ^~~~~~~~~~~~~~~
In file included from include/linux/io_uring.h:7,
                 from io_uring/kbuf.c:10:
include/uapi/linux/io_uring.h: In function 'io_buffer_select':
include/uapi/linux/io_uring.h:628:41: note: while referencing 'bufs'
  628 |                 struct io_uring_buf     bufs[0];
      |                                         ^~~~

[1] https://www.kernel.org/doc/html/latest/process/deprecated.html#zero-length-and-one-element-arrays

Fixes: c7fb19428d67 ("io_uring: add support for ring mapped supplied buffers")
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Pavel Begunkov <asml.silence@gmail.com>
Cc: "Gustavo A. R. Silva" <gustavoars@kernel.org>
Cc: stable@vger.kernel.org
Cc: io-uring@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20230105190507.gonna.131-kees@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipmi_ssif: Rename idle state and check

commit 8230831c43a328c2be6d28c65d3f77e14c59986b upstream.

Rename the SSIF_IDLE() to IS_SSIF_IDLE(), since that is more clear, and
rename SSIF_NORMAL to SSIF_IDLE, since that's more accurate.

Cc: stable@vger.kernel.org
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipmi:ssif: resend_msg() cannot fail

commit 95767ed78a181d5404202627499f9cde56053b96 upstream.

The resend_msg() function cannot fail, but there was error handling
around using it. Rework the handling of the error, and fix the out of
retries debug reporting that was wrong around this, too.

Cc: stable@vger.kernel.org
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipmi: ipmb: Fix the MODULE_PARM_DESC associated to 'retry_time_ms'

commit befb28f2676a65a5a4cc4626ae224461d8785af6 upstream.

'This should be 'retry_time_ms' instead of 'max_retries'.

Fixes: 63c4eb347164 ("ipmi:ipmb: Add initial support for IPMI over IPMB")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Message-Id: <0d8670cff2c656e99a832a249e77dc90578f67de.1675591429.git.christophe.jaillet@wanadoo.fr>
Cc: stable@vger.kernel.org
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rtc: pm8xxx: fix set-alarm race

commit c88db0eff9722fc2b6c4d172a50471d20e08ecc6 upstream.

Make sure to disable the alarm before updating the four alarm time
registers to avoid spurious alarms during the update.

Note that the disable needs to be done outside of the ctrl_reg_lock
section to prevent a racing alarm interrupt from disabling the newly set
alarm when the lock is released.

Fixes: 9a9a54ad7aa2 ("drivers/rtc: add support for Qualcomm PMIC8xxx RTC")
Cc: stable@vger.kernel.org # 3.1
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: David Collins <quic_collinsd@quicinc.com>
Link: https://lore.kernel.org/r/20230202155448.6715-2-johan+linaro@kernel.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

block: be a bit more careful in checking for NULL bdev while polling

commit 310726c33ad76cebdee312dbfafc12c1b44bf977 upstream.

Wei reports a crash with an application using polled IO:

PGD 14265e067 P4D 14265e067 PUD 47ec50067 PMD 0
Oops: 0000 [#1] SMP
CPU: 0 PID: 21915 Comm: iocore_0 Kdump: loaded Tainted: G S                5.12.0-0_fbk12_clang_7346_g1bb6f2e7058f #1
Hardware name: Wiwynn Delta Lake MP T8/Delta Lake-Class2, BIOS Y3DLM08 04/10/2022
RIP: 0010:bio_poll+0x25/0x200
Code: 0f 1f 44 00 00 0f 1f 44 00 00 55 41 57 41 56 41 55 41 54 53 48 83 ec 28 65 48 8b 04 25 28 00 00 00 48 89 44 24 20 48 8b 47 08 <48> 8b 80 70 02 00 00 4c 8b 70 50 8b 6f 34 31 db 83 fd ff 75 25 65
RSP: 0018:ffffc90005fafdf8 EFLAGS: 00010292
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 74b43cd65dd66600
RDX: 0000000000000003 RSI: ffffc90005fafe78 RDI: ffff8884b614e140
RBP: ffff88849964df78 R08: 0000000000000000 R09: 0000000000000008
R10: 0000000000000000 R11: 0000000000000000 R12: ffff88849964df00
R13: ffffc90005fafe78 R14: ffff888137d3c378 R15: 0000000000000001
FS:  00007fd195000640(0000) GS:ffff88903f400000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000270 CR3: 0000000466121001 CR4: 00000000007706f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
iocb_bio_iopoll+0x1d/0x30
io_do_iopoll+0xac/0x250
__se_sys_io_uring_enter+0x3c5/0x5a0
? __x64_sys_write+0x89/0xd0
do_syscall_64+0x2d/0x40
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x94f225d
Code: 24 cc 00 00 00 41 8b 84 24 d0 00 00 00 c1 e0 04 83 e0 10 41 09 c2 8b 33 8b 53 04 4c 8b 43 18 4c 63 4b 0c b8 aa 01 00 00 0f 05 <85> c0 0f 88 85 00 00 00 29 03 45 84 f6 0f 84 88 00 00 00 41 f6 c7
RSP: 002b:00007fd194ffcd88 EFLAGS: 00000202 ORIG_RAX: 00000000000001aa
RAX: ffffffffffffffda RBX: 00007fd194ffcdc0 RCX: 00000000094f225d
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000007
RBP: 00007fd194ffcdb0 R08: 0000000000000000 R09: 0000000000000008
R10: 0000000000000001 R11: 0000000000000202 R12: 00007fd269d68030
R13: 0000000000000000 R14: 0000000000000001 R15: 0000000000000000

which is due to bio->bi_bdev being NULL. This can happen if we have two
tasks doing polled IO, and task B ends up completing IO from task A if
they are sharing a poll queue. If task B completes the IO and puts the
bio into our cache, then it can allocate that bio again before task A
is done polling for it. As that would necessitate a preempt between the
two tasks, it's enough to just be a bit more careful in checking for
whether or not bio->bi_bdev is NULL.

Reported-and-tested-by: Wei Zhang <wzhang@meta.com>
Cc: stable@vger.kernel.org
Fixes: be4d234d7aeb ("bio: add allocation cache abstraction")
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

block: clear bio->bi_bdev when putting a bio back in the cache

commit 11eb695feb636fa5211067189cad25ac073e7fe5 upstream.

This isn't strictly needed in terms of correctness, but it does allow
polling to know if the bio has been put already by a different task
and hence avoid polling something that we don't need to.

Cc: stable@vger.kernel.org
Fixes: be4d234d7aeb ("bio: add allocation cache abstraction")
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

block: don't allow multiple bios for IOCB_NOWAIT issue

commit 67d59247d4b52c917e373f05a807027756ab216f upstream.

If we're doing a large IO request which needs to be split into multiple
bios for issue, then we can run into the same situation as the below
marked commit fixes - parts will complete just fine, one or more parts
will fail to allocate a request. This will result in a partially
completed read or write request, where the caller gets EAGAIN even though
parts of the IO completed just fine.

Do the same for large bios as we do for splits - fail a NOWAIT request
with EAGAIN. This isn't technically fixing an issue in the below marked
patch, but for stable purposes, we should have either none of them or
both.

This depends on: 613b14884b85 ("block: handle bio_split_to_limits() NULL return")

Cc: stable@vger.kernel.org # 5.15+
Fixes: 9cea62b2cbab ("block: don't allow splitting of a REQ_NOWAIT bio")
Link: https://github.com/axboe/liburing/issues/766
Reported-and-tested-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

firmware: coreboot: framebuffer: Ignore reserved pixel color bits

commit e6acaf25cba14661211bb72181c35dd13b24f5b3 upstream.

The coreboot framebuffer doesn't support transparency, its 'reserved'
bit field is merely padding for byte/word alignment of pixel colors [1].
When trying to match the framebuffer to a simplefb format, the kernel
driver unnecessarily requires the format's transparency bit field to
exactly match this padding, even if the former is zero-width.

Due to a coreboot bug [2] (fixed upstream), some boards misreport the
reserved field's size as equal to its position (0x18 for both on a
'Lick' Chromebook), and the driver fails to probe where it would have
otherwise worked fine with e.g. the a8r8g8b8 or x8r8g8b8 formats.

Remove the transparency comparison with reserved bits. When the
bits-per-pixel and other color components match, transparency will
already be in a subset of the reserved field. Not forcing it to match
reserved bits allows the driver to work on the boards which misreport
the reserved field. It also enables using simplefb formats that don't
have transparency bits, although this doesn't currently happen due to
format support and ordering in linux/platform_data/simplefb.h.

[1] https://review.coreboot.org/plugins/gitiles/coreboot/+/4.19/src/commonlib/include/commonlib/coreboot_tables.h#255
[2] https://review.coreboot.org/plugins/gitiles/coreboot/+/4.13/src/drivers/intel/fsp2_0/graphics.c#82

Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com>
Link: https://lore.kernel.org/r/20230122190433.195941-1-alpernebiyasak@gmail.com
Cc: Salvatore Bonaccorso <carnil@debian.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: mpt3sas: Remove usage of dma_get_required_mask() API

commit 06e472acf964649a58b7de35fc9cdc3151acb970 upstream.

Remove the usage of dma_get_required_mask() API. Directly set the DMA mask
to 63/64 if the system is a 64bit machine.

Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Link: https://lore.kernel.org/r/20221028091655.17741-2-sreekanth.reddy@broadcom.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Salvatore Bonaccorso <carnil@debian.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

wifi: rtl8xxxu: fixing transmisison failure for rtl8192eu

commit c6015bf3ff1ffb3caa27eb913797438a0fc634a0 upstream.

Fixing transmission failure which results in
"authentication with ... timed out". This can be
fixed by disable the REG_TXPAUSE.

Signed-off-by: Jun ASAKA <JunASAKA@zzy040330.moe>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221217030659.12577-1-JunASAKA@zzy040330.moe
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

driver core: fw_devlink: Avoid spurious error message

[ Upstream commit 6309872413f14f3d58c13ae4dc85b1a7004b4193 ]

fw_devlink can sometimes try to create a device link with the consumer
and supplier as the same device. These attempts will fail (correctly),
but are harmless. So, avoid printing an error for these cases. Also, add
more detail to the error message.

Fixes: 3fb16866b51d ("driver core: fw_devlink: Make cycle detection more robust")
Reported-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reported-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Saravana Kannan <saravanak@google.com>
Link: https://lore.kernel.org/r/20230225064148.274376-1-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/shmem-helper: Revert accidental non-GPL export

[ Upstream commit 047a754558d640eaa080fce3b22ca9f3d4e04626 ]

The referenced commit added a wrapper for drm_gem_shmem_get_pages_sgt(),
but in the process it accidentally changed the export type from GPL to
non-GPL. Switch it back to GPL.

Reported-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Fixes: ddddedaa0db9 ("drm/shmem-helper: Fix locking for drm_gem_shmem_get_pages_sgt()")
Signed-off-by: Asahi Lina <lina@asahilina.net>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230227-shmem-export-fix-v1-1-8880b2c25e81@asahilina.net
Signed-off-by: Sasha Levin <sashal@kernel.org>

cifs: prevent data race in smb2_reconnect()

[ Upstream commit 3c0070f54b3128de498c2dd9934a21f0dd867111 ]

Make sure to get an up-to-date TCP_Server_Info::nr_targets value prior
to waiting the server to be reconnected in smb2_reconnect(). It is
set in cifs_tcp_ses_needs_reconnect() and protected by
TCP_Server_Info::srv_lock.

Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nfsd: don't hand out delegation on setuid files being opened for write

[ Upstream commit 826b67e6376c2a788e3a62c4860dcd79500a27d5 ]

We had a bug report that xfstest generic/355 was failing on NFSv4.0.
This test sets various combinations of setuid/setgid modes and tests
whether DIO writes will cause them to be stripped.

What I found was that the server did properly strip those bits, but
the client didn't notice because it held a delegation that was not
recalled. The recall didn't occur because the client itself was the
one generating the activity and we avoid recalls in that case.

Clearing setuid bits is an "implicit" activity. The client didn't
specifically request that we do that, so we need the server to issue a
CB_RECALL, or avoid the situation entirely by not issuing a delegation.

The easiest fix here is to simply not give out a delegation if the file
is being opened for write, and the mode has the setuid and/or setgid bit
set. Note that there is a potential race between the mode and lease
being set, so we test for this condition both before and after setting
the lease.

This patch fixes generic/355, generic/683 and generic/684 for me. (Note
that 355 fails only on v4.0, and 683 and 684 require NFSv4.2 to run and
fail).

Reported-by: Boyang Xue <bxue@redhat.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nfsd: zero out pointers after putting nfsd_files on COPY setup error

[ Upstream commit 1f0001d43d0c0ac2a19a34a914f6595ad97cbc1d ]

At first, I thought this might be a source of nfsd_file overputs, but
the current callers seem to avoid an extra put when nfsd4_verify_copy
returns an error.

Still, it's "bad form" to leave the pointers filled out when we don't
have a reference to them anymore, and that might lead to bugs later.
Zero them out as a defensive coding measure.

Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dm cache: add cond_resched() to various workqueue loops

[ Upstream commit 76227f6dc805e9e960128bcc6276647361e0827c ]

Otherwise on resource constrained systems these workqueues may be too
greedy.

Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dm thin: add cond_resched() to various workqueue loops

[ Upstream commit e4f80303c2353952e6e980b23914e4214487f2a6 ]

Otherwise on resource constrained systems these workqueues may be too
greedy.

Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/display: Disable HUBP/DPP PG on DCN314 for now

[ Upstream commit b7c67f72408b11b922f23f06c7df0f6743a2e89d ]

[Why]
The DMCUB implementation required to workaround corruption is
not currently stable and may cause intermittent corruption or hangs.

[How]
Disable PG until the sequence is stable.

Reviewed-by: Hansen Dsouza <hansen.dsouza@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm: panel-orientation-quirks: Add quirk for Lenovo IdeaPad Duet 3 10IGL5

[ Upstream commit 38b2d8efd03d2e56431b611e3523f0158306451d ]

Another Lenovo convertable where the panel is installed landscape but is
reported to the kernel as portrait.

Signed-off-by: Darrell Kavanagh <darrell.kavanagh@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230214164659.3583-1-darrell.kavanagh@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/display: Enable P-state validation checks for DCN314

[ Upstream commit 37d184b548db0f64d4a878960b2c6988b38a3e7e ]

[Why]
To align with DCN31 behavior. This helps avoid p-state hangs in
the case where underflow does occur.

[How]
Flip the bit to true.

Reviewed-by: Hansen Dsouza <hansen.dsouza@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HID: logitech-hidpp: Don't restart communication if not necessary

[ Upstream commit 498ba20690357691103de0f766960355247c78be ]

Don't stop and restart communication with the device unless we need to
modify the connect flags used because of a device quirk.

Signed-off-by: Bastien Nocera <hadess@hadess.net>
Link: https://lore.kernel.org/r/20230125121723.3122-1-hadess@hadess.net
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: ufs: core: Fix device management cmd timeout flow

[ Upstream commit 36822124f9de200cedc2f42516301b50d386a6cd ]

In the UFS error handling flow, the host will send a device management cmd
(NOP OUT) to the device for link recovery. If this cmd times out and
clearing the doorbell fails, ufshcd_wait_for_dev_cmd() will do nothing and
return. hba->dev_cmd.complete struct is not set to NULL.

When this happens, if cmd has been completed by device, then we will call
complete() in __ufshcd_transfer_req_compl(). Because the complete struct is
allocated on the stack, the following crash will occur:

  ipanic_die+0x24/0x38 [mrdump]
  die+0x344/0x748
  arm64_notify_die+0x44/0x104
  do_debug_exception+0x104/0x1e0
  el1_dbg+0x38/0x54
  el1_sync_handler+0x40/0x88
  el1_sync+0x8c/0x140
  queued_spin_lock_slowpath+0x2e4/0x3c0
  __ufshcd_transfer_req_compl+0x3b0/0x1164
  ufshcd_trc_handler+0x15c/0x308
  ufshcd_host_reset_and_restore+0x54/0x260
  ufshcd_reset_and_restore+0x28c/0x57c
  ufshcd_err_handler+0xeb8/0x1b6c
  process_one_work+0x288/0x964
  worker_thread+0x4bc/0xc7c
  kthread+0x15c/0x264
  ret_from_fork+0x10/0x30

Link: https://lore.kernel.org/r/20221216032532.1280-1-mason.zhang@mediatek.com
Signed-off-by: Mason Zhang <Mason.Zhang@mediatek.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: snic: Fix memory leak with using debugfs_lookup()

[ Upstream commit ad0e4e2fab928477f74d742e6e77d79245d3d3e7 ]

When calling debugfs_lookup() the result must have dput() called on it,
otherwise the memory will leak over time. To make things simpler, just
call debugfs_lookup_and_remove() instead which handles all of the logic at
once.

Link: https://lore.kernel.org/r/20230202141009.2290380-1-gregkh@linuxfoundation.org
Cc: Karan Tilak Kumar <kartilak@cisco.com>
Cc: Sesidhar Baddela <sebaddel@cisco.com>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: linux-scsi@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/display: Do not commit pipe when updating DRR

[ Upstream commit 8f0d304d21b351d65e8c434c5399a40231876ba1 ]

[WHY]
DRR and Pipe cannot be updated on
the same frame, or else underflow will
occur.

Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pinctrl: at91: use devm_kasprintf() to avoid potential leaks

[ Upstream commit 1c4e5c470a56f7f7c649c0c70e603abc1eab15c4 ]

Use devm_kasprintf() instead of kasprintf() to avoid any potential
leaks. At the moment drivers have no remove functionality thus
there is no need for fixes tag.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20230203132714.1931596-1-claudiu.beznea@microchip.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

hwmon: (nct6775) B650/B660/X670 ASUS boards support

[ Upstream commit e2e09989ccc21ad428d6393450add78584b143bd ]

Boards such as:
  "EX-B660M-V5 PRO D4",
  "PRIME B650-PLUS",
  "PRIME B650M-A",
  "PRIME B650M-A AX",
  "PRIME B650M-A II",
  "PRIME B650M-A WIFI",
  "PRIME B650M-A WIFI II",
  "PRIME B660M-A D4",
  "PRIME B660M-A WIFI D4",
  "PRIME X670-P",
  "PRIME X670-P WIFI",
  "PRIME X670E-PRO WIFI",
  "Pro B660M-C-D4",
  "ProArt B660-CREATOR D4",
  "ProArt X670E-CREATOR WIFI",
  "ROG CROSSHAIR X670E EXTREME",
  "ROG CROSSHAIR X670E GENE",
  "ROG CROSSHAIR X670E HERO",
  "ROG MAXIMUS XIII EXTREME GLACIAL",
  "ROG MAXIMUS Z690 EXTREME",
  "ROG MAXIMUS Z690 EXTREME GLACIAL",
  "ROG STRIX B650-A GAMING WIFI",
  "ROG STRIX B650E-E GAMING WIFI",
  "ROG STRIX B650E-F GAMING WIFI",
  "ROG STRIX B650E-I GAMING WIFI",
  "ROG STRIX B660-A GAMING WIFI D4",
  "ROG STRIX B660-F GAMING WIFI",
  "ROG STRIX B660-G GAMING WIFI",
  "ROG STRIX B660-I GAMING WIFI",
  "ROG STRIX X670E-A GAMING WIFI",
  "ROG STRIX X670E-E GAMING WIFI",
  "ROG STRIX X670E-F GAMING WIFI",
  "ROG STRIX X670E-I GAMING WIFI",
  "ROG STRIX Z590-A GAMING WIFI II",
  "ROG STRIX Z690-A GAMING WIFI D4",
  "TUF GAMING B650-PLUS",
  "TUF GAMING B650-PLUS WIFI",
  "TUF GAMING B650M-PLUS",
  "TUF GAMING B650M-PLUS WIFI",
  "TUF GAMING B660M-PLUS WIFI",
  "TUF GAMING X670E-PLUS",
  "TUF GAMING X670E-PLUS WIFI",
  "TUF GAMING Z590-PLUS WIFI",
have got a NCT6799D chip, but by default there's no use of it
because of resource conflict with WMI method.

This commit adds such boards to the monitoring list with new ACPI device
UID.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=204807
Signed-off-by: Denis Pauk <pauk.denis@gmail.com>
Co-developed-by: Ahmad Khalifa <ahmad@khalifa.ws>
Signed-off-by: Ahmad Khalifa <ahmad@khalifa.ws>
Tested-by: Jeroen Beerstra <jeroen@beerstra.org>
Tested-by: Slawomir Stepien <sst@poczta.fm>
Link: https://lore.kernel.org/r/20230111212241.7456-2-pauk.denis@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

hwmon: (nct6775) Directly call ASUS ACPI WMI method

[ Upstream commit c3b3747d02f571da2543e719066a50dd966989d8 ]

New ASUS B650/B660/X670 boards firmware have not exposed WMI monitoring
GUID and entrypoint method WMBD could be implemented for different device
UID.

Implement the direct call to entrypoint method for monitoring the device
UID of B550/X570 boards.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=204807
Signed-off-by: Denis Pauk <pauk.denis@gmail.com>
Co-developed-by: Ahmad Khalifa <ahmad@khalifa.ws>
Signed-off-by: Ahmad Khalifa <ahmad@khalifa.ws>
Link: https://lore.kernel.org/r/20230111212241.7456-1-pauk.denis@gmail.com
[groeck: Fix multi-line formatting]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

hwmon: (coretemp) Simplify platform device handling

[ Upstream commit 6d03bbff456befeccdd4d663177c4d6c75d0c4ff ]

Coretemp's platform driver is unconventional. All the real work is done
globally by the initcall and CPU hotplug notifiers, while the "driver"
effectively just wraps an allocation and the registration of the hwmon
interface in a long-winded round-trip through the driver core. The whole
logic of dynamically creating and destroying platform devices to bring
the interfaces up and down is error prone, since it assumes
platform_device_add() will synchronously bind the driver and set drvdata
before it returns, thus results in a NULL dereference if drivers_autoprobe
is turned off for the platform bus. Furthermore, the unusual approach of
doing that from within a CPU hotplug notifier, already commented in the
code that it deadlocks suspend, also causes lockdep issues for other
drivers or subsystems which may want to legitimately register a CPU
hotplug notifier from a platform bus notifier.

All of these issues can be solved by ripping this unusual behaviour out
completely, simply tying the platform devices to the lifetime of the
module itself, and directly managing the hwmon interfaces from the
hotplug notifiers. There is a slight user-visible change in that
/sys/bus/platform/drivers/coretemp will no longer appear, and
/sys/devices/platform/coretemp.n will remain present if package n is
hotplugged off, but hwmon users should really only be looking for the
presence of the hwmon interfaces, whose behaviour remains unchanged.

Link: https://lore.kernel.org/lkml/20220922101036.87457-1-janusz.krzysztofik@linux.intel.com/
Link: https://gitlab.freedesktop.org/drm/intel/issues/6641
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Link: https://lore.kernel.org/r/20230103114620.15319-1-janusz.krzysztofik@linux.intel.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

gfs2: Improve gfs2_make_fs_rw error handling

[ Upstream commit b66f723bb552ad59c2acb5d45ea45c890f84498b ]

In gfs2_make_fs_rw(), make sure to call gfs2_consist() to report an
inconsistency and mark the filesystem as withdrawn when
gfs2_find_jhead() fails.

At the end of gfs2_make_fs_rw(), when we discover that the filesystem
has been withdrawn, make sure we report an error. This also replaces
the gfs2_withdrawn() check after gfs2_find_jhead().

Reported-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Cc: syzbot+f51cb4b9afbd87ec06f2@syzkaller.appspotmail.com
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/display: fix FCLK pstate change underflow

[ Upstream commit 972243f973eb0821084e5833d5f7f4ed025f42da ]

[Why]
Currently we set FCLK p-state change
watermark calculated based on dummy
p-state latency when UCLK p-state is
not supported

[How]
Calculate FCLK p-state change watermark
based on on FCLK pstate change latency
in case UCLK p-state is not supported

Reviewed-by: Nevenko Stupar <Nevenko.Stupar@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Vladimir Stempen <vladimir.stempen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Revert "drm/amdgpu: TA unload messages are not actually sent to psp when amdgpu is uninstalled"

[ Upstream commit 39934d3ed5725c5e3570ed1b67f612f1ea60ce03 ]

This reverts commit fac53471d0ea9693d314aa2df08d62b2e7e3a0f8.
The following change: move the drm_dev_unplug call after
amdgpu_driver_unload_kms in amdgpu_pci_remove. The reason is
the following: amdgpu_pci_remove calls drm_dev_unregister
and it should be called first to ensure userspace can't access the
device instance anymore. If we call drm_dev_unplug after
amdgpu_driver_unload_kms then we observe IGT PCI software unplug
test failure (kernel hung) for all ASICs. This is how this
regression was found.

After this revert, the following commands do work not, but it would
be fixed in the next commit:
- sudo modprobe -r amdgpu
- sudo modprobe amdgpu

Signed-off-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Reviewed-by Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

regulator: s5m8767: Bounds check id indexing into arrays

[ Upstream commit e314e15a0b58f9d051c00b25951073bcdae61953 ]

The compiler has no way to know if "id" is within the array bounds of
the regulators array. Add a check for this and a build-time check that
the regulators and reg_voltage_map arrays are sized the same. Seen with
GCC 13:

../drivers/regulator/s5m8767.c: In function 's5m8767_pmic_probe':
../drivers/regulator/s5m8767.c:936:35: warning: array subscript [0, 36] is outside array bounds of 'struct regulator_desc[37]' [-Warray-bounds=]
936 | regulators[id].vsel_reg =
| ~~~~~~~~~~^~~~

Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: linux-samsung-soc@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230128005358.never.313-kees@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

regulator: max77802: Bounds check regulator id against opmode

[ Upstream commit 4fd8bcec5fd7c0d586206fa2f42bd67b06cdaa7e ]

Explicitly bounds-check the id before accessing the opmode array. Seen
with GCC 13:

../drivers/regulator/max77802-regulator.c: In function 'max77802_enable':
../drivers/regulator/max77802-regulator.c:217:29: warning: array subscript [0, 41] is outside array bounds of 'unsigned int[42]' [-Warray-bounds=]
  217 |         if (max77802->opmode[id] == MAX77802_OFF_PWRREQ)
      |             ~~~~~~~~~~~~~~~~^~~~
../drivers/regulator/max77802-regulator.c:62:22: note: while referencing 'opmode'
   62 |         unsigned int opmode[MAX77802_REG_MAX];
      |                      ^~~~~~

Cc: Javier Martinez Canillas <javier@dowhile0.org>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20230127225203.never.864-kees@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: kirkwood: Iterate over array indexes instead of using pointer math

[ Upstream commit b3bcedc0402fcdc5c8624c433562d9d1882749d8 ]

Walking the dram->cs array was seen as accesses beyond the first array
item by the compiler. Instead, use the array index directly. This allows
for run-time bounds checking under CONFIG_UBSAN_BOUNDS as well. Seen
with GCC 13 with -fstrict-flex-arrays:

../sound/soc/kirkwood/kirkwood-dma.c: In function
'kirkwood_dma_conf_mbus_windows.constprop':
../sound/soc/kirkwood/kirkwood-dma.c:90:24: warning: array subscript 0 is outside array bounds of 'const struct mbus_dram_window[0]' [-Warray-bounds=]
90 | if ((cs->base & 0xffff0000) < (dma & 0xffff0000)) {
| ~~^~~~~~

Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: alsa-devel@alsa-project.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20230127224128.never.410-kees@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: soc-compress: Reposition and add pcm_mutex

[ Upstream commit aa9ff6a4955fdba02b54fbc4386db876603703b7 ]

If panic_on_warn is set and compress stream(DPCM) is started,
then kernel panic occurred because card->pcm_mutex isn't held appropriately.
In the following functions, warning were issued at this line
"snd_soc_dpcm_mutex_assert_held".

static int dpcm_be_connect(struct snd_soc_pcm_runtime *fe,
struct snd_soc_pcm_runtime *be, int stream)
{
...
snd_soc_dpcm_mutex_assert_held(fe);
...
}

void dpcm_be_disconnect(struct snd_soc_pcm_runtime *fe, int stream)
{
...
snd_soc_dpcm_mutex_assert_held(fe);
...
}

void snd_soc_runtime_action(struct snd_soc_pcm_runtime *rtd,
    int stream, int action)
{
...
snd_soc_dpcm_mutex_assert_held(rtd);
...
}

int dpcm_dapm_stream_event(struct snd_soc_pcm_runtime *fe, int dir,
int event)
{
...
snd_soc_dpcm_mutex_assert_held(fe);
...
}

These functions are called by soc_compr_set_params_fe, soc_compr_open_fe
and soc_compr_free_fe
without pcm_mutex locking. And this is call stack.

[  414.527841][ T2179] pc : dpcm_process_paths+0x5a4/0x750
[  414.527848][ T2179] lr : dpcm_process_paths+0x37c/0x750
[  414.527945][ T2179] Call trace:
[  414.527949][ T2179]  dpcm_process_paths+0x5a4/0x750
[  414.527955][ T2179]  soc_compr_open_fe+0xb0/0x2cc
[  414.527972][ T2179]  snd_compr_open+0x180/0x248
[  414.527981][ T2179]  snd_open+0x15c/0x194
[  414.528003][ T2179]  chrdev_open+0x1b0/0x220
[  414.528023][ T2179]  do_dentry_open+0x30c/0x594
[  414.528045][ T2179]  vfs_open+0x34/0x44
[  414.528053][ T2179]  path_openat+0x914/0xb08
[  414.528062][ T2179]  do_filp_open+0xc0/0x170
[  414.528068][ T2179]  do_sys_openat2+0x94/0x18c
[  414.528076][ T2179]  __arm64_sys_openat+0x78/0xa4
[  414.528084][ T2179]  invoke_syscall+0x48/0x10c
[  414.528094][ T2179]  el0_svc_common+0xbc/0x104
[  414.528099][ T2179]  do_el0_svc+0x34/0xd8
[  414.528103][ T2179]  el0_svc+0x34/0xc4
[  414.528125][ T2179]  el0t_64_sync_handler+0x8c/0xfc
[  414.528133][ T2179]  el0t_64_sync+0x1a0/0x1a4
[  414.528142][ T2179] Kernel panic - not syncing: panic_on_warn set ...

So, I reposition and add pcm_mutex to resolve lockdep error.

Signed-off-by: Shinhyung Kang <s47.kang@samsung.com>
Link: https://lore.kernel.org/r/016401d90ac4$7b6848c0$7238da40$@samsung.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>