platform/kernel/linux-starfive.git
5 years agoARM: pxa: Add GPIO descriptors for Palm27x
Linus Walleij [Sun, 2 Dec 2018 08:43:23 +0000 (09:43 +0100)]
ARM: pxa: Add GPIO descriptors for Palm27x

The Palm27x devices set up the MMC card detect and
write protect lines with a special helper function.
Augment this helper function to also accept an optional
GPIO descriptor table and pass and register this for
all the Palm27x devices in that family.

Cc: Daniel Mack <daniel@zonque.org>
Cc: Robert Jarzmik <robert.jarzmik@free.fr>
Cc: Bartosz Golaszewski <brgl@bgdev.pl>
Cc: Andrea Adami <andrea.adami@gmail.com>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
5 years agoARM: pxa: Add gpio descriptor lookup tables for MMC CD/WP
Linus Walleij [Sun, 2 Dec 2018 08:43:22 +0000 (09:43 +0100)]
ARM: pxa: Add gpio descriptor lookup tables for MMC CD/WP

This adds GPIO descriptor look-up tables for a whole bunch
of PXA boards with MMC card detect (CD) and write protect (WP)
GPIO lines, so we can move away from the hard-coded GPIO
numberspace.

In some cases the platforms were compulsively including the
<linux/gpio.h> header even if they weren't actually using
it, and in these cases I simply replaced that inclusion with
the more appropriate <linux/gpio/machine.h> which is what
board files should be including most of the time.

Cc: Daniel Mack <daniel@zonque.org>
Cc: Robert Jarzmik <robert.jarzmik@free.fr>
Cc: Bartosz Golaszewski <brgl@bgdev.pl>
Cc: Andrea Adami <andrea.adami@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
5 years agogpio: name PCA953x gpio chips after device name
Linus Walleij [Sun, 2 Dec 2018 08:43:21 +0000 (09:43 +0100)]
gpio: name PCA953x gpio chips after device name

Instead of using the name directly from the I2C client
to name the gpio_chip, use dev_name() on the client->dev,
so we get the sometimes more unique device name, as I2C has
a mechanism for naming its devices explicitly in e.g.
board data.

This is a prerequisite for being able to reference
uniquely any I2C GPIO expander defined in a board file
when setting up GPIO descriptor tables.

Reviewed-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
5 years agommc: s3cmci: Use the slot GPIO descriptor
Linus Walleij [Sun, 2 Dec 2018 08:43:20 +0000 (09:43 +0100)]
mmc: s3cmci: Use the slot GPIO descriptor

Simplify things by making the S3CMCI driver just use
slot GPIO with descriptors instead of passing around the
global GPIO numbers that we want to get rid of.

Getting the names of the GPIO chips into the machine
descriptor tables was a bit of a challenge but I think
I have them right.

The platform data supports passing in inversion flags, but
no platform is using them, and it is highly unlikely
that we will add more, so drop them. The long term plan
is to let the inversion flags on the GPIO machine
descriptor do the job.

The lines are flagged as GPIO_ACTIVE_[LOW|HIGH] as that is
what they are, and since we can now rely on the descriptors
to have the right polarity, we set the
"override_active_level" to false in mmc_gpiod_request_cd()
and mmc_gpiod_request_ro().

Cc: Jaehoon Chung <jh80.chung@samsung.com>
Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>
Cc: Sergio Prado <sergio.prado@e-labworks.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
5 years agommc: host: tmio: Use GPIO descriptors
Linus Walleij [Sun, 2 Dec 2018 08:43:19 +0000 (09:43 +0100)]
mmc: host: tmio: Use GPIO descriptors

The TMIO MMC driver was passing global GPIO numbers around for
card detect. It turns out only one single board in the kernel
was actually making use of this feature so it is pretty easy
to convert the driver to use only GPIO descriptors.

The lines are flagged as GPIO_ACTIVE_[LOW|HIGH] as that is
what they are, and since we can now rely on the descriptors
to have the right polarity, we set the
"override_active_level" to false in mmc_gpiod_request_cd()
and mmc_gpiod_request_ro().

Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
5 years agommc: spi: Convert to use GPIO descriptors
Linus Walleij [Sun, 2 Dec 2018 08:43:18 +0000 (09:43 +0100)]
mmc: spi: Convert to use GPIO descriptors

Switch the SPI MMC driver to use GPIO descriptors internally
and just look those up using the standard slot GPIO
functions mmc_gpiod_request_cd() and mmc_gpiod_request_ro().
Make sure to request index 0 and 1 in accordance with the
SPI MMC DT binding, and add the same GPIOs in machine
descriptor tables on all boards that use SPI MMC in
board files.

The lines are flagged as GPIO_ACTIVE_[LOW|HIGH] as that is
what they are, and since we can now rely on the descriptors
to have the right polarity, we set the
"override_active_level" to false in mmc_gpiod_request_cd()
and mmc_gpiod_request_ro().

Cc: Hartley Sweeten <hsweeten@visionengravers.com> # Vision EP9307
Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
5 years agommc: meson-mx-sdio: check devm_kasprintf for failure
Nicholas Mc Guire [Thu, 22 Nov 2018 09:35:19 +0000 (10:35 +0100)]
mmc: meson-mx-sdio: check devm_kasprintf for failure

devm_kasprintf() may return NULL on failure of internal allocation thus
the assignments to  init.name  are not safe if not checked. On error
meson_mx_mmc_register_clks() returns negative values so -ENOMEM in the
(unlikely) failure case of devm_kasprintf() should be fine here.

Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Fixes: ed80a13bb4c4 ("mmc: meson-mx-sdio: Add a driver for the Amlogic Meson8 and Meson8b SoCs")
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
5 years agommc: sdhci-of-esdhc: workaround for unreliable pulse width detection
Yangbo Lu [Fri, 23 Nov 2018 03:15:37 +0000 (11:15 +0800)]
mmc: sdhci-of-esdhc: workaround for unreliable pulse width detection

This was a SoC issue on LX2160A Rev1.0.
eSDHC_DLLCFG1[DLL_PD_PULSE_STRETCH_SEL] must be set to 0 to
get 4 delay cells in the pulse width detection logic for eMMC
HS400 mode. Otherwise it would cause unexpected HS400 issue.
This patch is to clear this bit always for affected SoC when
reset for all, since this bit doesn't affect other speed modes.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
5 years agommc: sdhci-of-esdhc: temporary fixup for eMMC HS400 issue
Yangbo Lu [Fri, 23 Nov 2018 03:15:36 +0000 (11:15 +0800)]
mmc: sdhci-of-esdhc: temporary fixup for eMMC HS400 issue

Currently only LX2160A eSDHC supports eMMC HS400. According to
a large number of tests, eMMC HS400 failed to work at 150MHz,
and for a few boards failed to work at 175MHz. But eMMC HS400
worked fine on 200MHz. We hadn't found the root cause but
setting eSDHC_DLLCFG0[DLL_FREQ_SEL] = 0 using slow delay chain
seemed to resovle this issue. Let's use this as fixup for now.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
5 years agommc: sdhci-of-esdhc: add erratum A011334 support
Yangbo Lu [Fri, 23 Nov 2018 03:15:35 +0000 (11:15 +0800)]
mmc: sdhci-of-esdhc: add erratum A011334 support

There are timing violations in case of few division ratio options
are selected for card clock frequency. prescaler*divisor options
/3,/5,/6,/7,/9,/10,/11,/13,/14 and /15 are not available in LX2
Rev1.0. prescaler*divisor options /4,/8 and /12 only available in
LX2 Rev1.0. Applicable only for HS400 mode. so by add the erratum
A011334 support to limit the prescaler*divisor in LX2 REV1.0

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
5 years agommc: sdhci-of-esdhc: add hs400 mode support
Yangbo Lu [Fri, 23 Nov 2018 03:15:34 +0000 (11:15 +0800)]
mmc: sdhci-of-esdhc: add hs400 mode support

1.  Perform the Tuning Process at the HS400 target operating frequency.
    Latched the clock division value.
2.  if read transaction, then set the SDTIMNGCTL[FLW_CTL_BG].
3.  Switch to High Speed mode and then set the card clock frequency to
    a value not greater than 52Mhz
4.  Clear TBCTL[TB_EN],tuning block enable bit.
5.  Change to 8 bit DDR Mode
6.  Switch the card to HS400 mode.
7.  Set TBCTL[TB_EN], tuning block enable bit.
8.  Clear SYSCTL[SDCLKEN]
9.  Wait for PRSSTAT[SDSTB] to be set
10. Change the clock division to latched value.Set TBCTL[HS 400 mode]
    and Set SDCLKCTL[CMD_CLK_CTRL]
11. Set SYSCTL[SDCLKEN]
12. Wait for PRSSTAT[SDSTB] to be set
13. Set DLLCFG0[DLL_ENABLE] and DLLCFG0[DLL_FREQ_SEL].
14. Wait for delay chain to lock.
15. Set TBCTL[HS400_WNDW_ADJUST]
16. Again clear SYSCTL[SDCLKEN]
17. Wait for PRSSTAT[SDSTB] to be set
18. Set ESDHCCTL[FAF]
19. Wait for ESDHCCTL[FAF] to be cleared
20. Set SYSCTL[SDCLKEN]
21. Wait for PRSSTAT[SDSTB] to be set.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
5 years agommc: core: Add ->hs400_prepare_ddr() callback
Yinbo Zhu [Fri, 23 Nov 2018 03:15:33 +0000 (11:15 +0800)]
mmc: core: Add ->hs400_prepare_ddr() callback

Some eMMC controllers need specific settings for HS400 mode before the
speed mode can be switched to DDR mode, during the HS400 initialization
sequence. For that reason, let's introduce a new host callback,
->hs400_prepare_ddr() and invoked it just before switching to DDR mode.

Signed-off-by: Yinbo Zhu <yinbo.zhu@nxp.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
5 years agommc: sdhci-omap: Remove redundant structure assignments
Faiz Abbas [Wed, 21 Nov 2018 10:33:57 +0000 (16:03 +0530)]
mmc: sdhci-omap: Remove redundant structure assignments

The sdhci_execute_tuning() function has assignment of
private pointers multiple times. Remove the redundant assignment.

Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
5 years agommc: sdhci-omap: Add platform specific reset callback
Faiz Abbas [Wed, 21 Nov 2018 10:33:56 +0000 (16:03 +0530)]
mmc: sdhci-omap: Add platform specific reset callback

The TRM (SPRUIC2C - January 2017 - Revised May 2018 [1]) forbids
assertion of data reset while tuning is happening. Implement a
platform specific callback that takes care of this condition.

[1] http://www.ti.com/lit/pdf/spruic2 Section 25.5.1.2.4

Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
5 years agommc: jz4740: rework pre_req/post_req implementation
Ezequiel Garcia [Tue, 20 Nov 2018 18:21:21 +0000 (15:21 -0300)]
mmc: jz4740: rework pre_req/post_req implementation

As reported by Aaro, the JZ4740 MMC driver throws a warning when the kernel
is built without preemption (CONFIG_PREEMPT_NONE=y).

[   16.461094] jz4740-mmc 13450000.mmc: [jz4740_mmc_prepare_dma_data] invalid cookie: data->host_cookie 567 host->next_data.cookie 568
[   16.473120] jz4740-mmc 13450000.mmc: [jz4740_mmc_prepare_dma_data] invalid cookie: data->host_cookie 568 host->next_data.cookie 569
[   16.485144] jz4740-mmc 13450000.mmc: [jz4740_mmc_prepare_dma_data] invalid cookie: data->host_cookie 569 host->next_data.cookie 570
[   16.497170] jz4740-mmc 13450000.mmc: [jz4740_mmc_prepare_dma_data] invalid cookie: data->host_cookie 570 host->next_data.cookie 571

The problem seems to be related to how pre_req/post_req is implemented.
Currently, it seems the driver expects jz4740_mmc_prepare_dma_data() to be
called with monotonically increasing host_cookie values, which is wrong.

Moreover, the implementation is overly complicated, keeping track of
unneeded "next cookie" state.

So, instead of attempting to fix the current pre_req/post_req
implementation, this commit refactors the driver, dropping the state,
following other drivers such as dw_mmc and sdhci.

Cc: Paul Cercueil <paul@crapouillou.net>
Cc: Mathieu Malaterre <malat@debian.org>
Reported-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
5 years agommc: mmci: send stop command if sbc error issue
Ludovic Barre [Wed, 7 Nov 2018 09:30:40 +0000 (10:30 +0100)]
mmc: mmci: send stop command if sbc error issue

Refer to "4.15 set block count command" of sd specification:
Host needs to issue CMD12 if any error is detected in
the CMD18 and CMD25 operations.

In sbc case, the data->stop is fill by framework.

Signed-off-by: Ludovic Barre <ludovic.barre@st.com>
Tested-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
5 years agommc: document 'Reliable Write' bit in uapi header
Wolfram Sang [Mon, 3 Dec 2018 19:56:47 +0000 (20:56 +0100)]
mmc: document 'Reliable Write' bit in uapi header

If we use it this way, people should know about it. Also, replace
true/false with nonzero/zero because the flag is not strictly a bool
anymore.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
5 years agommc: tmio: introduce mask for 'always 1' bits
Wolfram Sang [Mon, 19 Nov 2018 13:13:57 +0000 (14:13 +0100)]
mmc: tmio: introduce mask for 'always 1' bits

Some variants (namely Renesas SDHI) have bits in the STATS and IRQ_MASK
registers which are 'always 1' and should be written as such. Introduce
a seperate mask for this and apply it whenever such a register is
written.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
5 years agommc: renesas_sdhi: disable HS400 on H3 ES1.x and M3-W ES1.[012]
Niklas Söderlund [Wed, 28 Nov 2018 16:18:29 +0000 (17:18 +0100)]
mmc: renesas_sdhi: disable HS400 on H3 ES1.x and M3-W ES1.[012]

The Renesas BSP confirms that H3 ES1.x and M3-W ES1.[012] do not
properly support HS400. Add a quirk to indicate this and disable HS400
in the MMC capabilities if the quirk is set.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
5 years agommc: renesas_sdhi: align compatibility properties for H3 and M3-W
Niklas Söderlund [Wed, 28 Nov 2018 16:18:28 +0000 (17:18 +0100)]
mmc: renesas_sdhi: align compatibility properties for H3 and M3-W

It was though all ES revisions of H3 and M3-W SoCs required the
TMIO_MMC_HAVE_4TAP_HS400 flag. Recent datasheet updates tells us this is
not true, only early ES revisions of the SoC do.

Since quirk matching based on ES revisions is now used to handle the
flag it's possible to align all Gen3 compatibility properties. This will
allow later ES revisions of H3 and M3-W to use the correct 8-tap HS400
mode.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
5 years agommc: renesas_sdhi: handle 4tap hs400 mode quirk based on SoC revision
Niklas Söderlund [Wed, 28 Nov 2018 16:18:27 +0000 (17:18 +0100)]
mmc: renesas_sdhi: handle 4tap hs400 mode quirk based on SoC revision

Latest datasheet makes it clear that not all ES revisions of the H3 and
M3-W have the 4-tap HS400 mode quirk, currently the quirk is set
unconditionally for these two SoCs. Prepare to handle the quirk based on
SoC revision instead of compatibility value by using soc_device_match()
and set the TMIO_MMC_HAVE_4TAP_HS400 flag explicitly.

The reason for adding a new quirks struct instead of just a flag is that
looking ahead it seems more quirks needs to be handled in a SoC revision
basis.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
5 years agommc: renesas_sdhi: add initial setting of interrupt mask register
Niklas Söderlund [Mon, 26 Nov 2018 17:02:47 +0000 (18:02 +0100)]
mmc: renesas_sdhi: add initial setting of interrupt mask register

The initial value of the interrupt mask register may be different from
the H/W manual at the startup of the kernel by setting from the
bootloader. Since the error interrupts may be unmasked, the driver sets
initial value.

The initial value is only known for R-Car Gen2 and Gen3 platforms so
limit the initialization to those platforms.

Based on work from Masaharu Hayakawa.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
5 years agommc: tmio: fix reset operation
Niklas Söderlund [Mon, 26 Nov 2018 17:02:46 +0000 (18:02 +0100)]
mmc: tmio: fix reset operation

SD / MMC did not operate properly when suspend transition failed.
Because the SCC was not reset at resume, issue of the command failed.
Call the host specific reset function and reset the hardware in order to
add reset of SCC. This change also fixes tuning on some stubborn cards
on Gen2.

Based on work from Masaharu Hayakawa.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
5 years agommc: tmio: enable module clock before resetting when resuming
Niklas Söderlund [Mon, 26 Nov 2018 17:02:45 +0000 (18:02 +0100)]
mmc: tmio: enable module clock before resetting when resuming

On runtime power management resume, the host clock needs to be
enabled before calling tmio_mmc_reset. If the mmc device has a power
domain entry, the host clock is enabled via genpd_runtime_resume,
running before tmio_mmc_host_runtime_resume. If the mmc device has no
power domain entry, however, genpd_runtime_resume is not called. This
patch changes tmio_mmc_host_runtime_resume to enable the host clock
before calling tmio_mmc_reset.

Based on work from Masaharu Hayakawa.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
5 years agommc: core: remove obsolete mmc_set_blockcount() function
Wolfram Sang [Mon, 26 Nov 2018 13:38:14 +0000 (14:38 +0100)]
mmc: core: remove obsolete mmc_set_blockcount() function

The only user was converted to fill a sbc command which is the proper
way to do it because of AutoCMD23 feature of some hosts.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Clément Péron <peron.clem@gmail.com>
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
5 years agommc: bcm2835: Properly handle dmaengine_prep_slave_sg
Stefan Wahren [Sun, 11 Nov 2018 20:23:59 +0000 (21:23 +0100)]
mmc: bcm2835: Properly handle dmaengine_prep_slave_sg

In case dmaengine_prep_slave_sg fails we need to call dma_unmap_sg.

Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Acked-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
5 years agommc: bcm2835: Refactor dma_map_sg handling
Stefan Wahren [Sun, 11 Nov 2018 20:23:58 +0000 (21:23 +0100)]
mmc: bcm2835: Refactor dma_map_sg handling

There are two variables len within bcm2835_prepare_dma. So rename the
result of dma_map_sg to sg_len. While we are at this add a bail out to
simplify the following change.

Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Acked-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
5 years agommc: bcm2835: Terminate timeout work synchronously
Stefan Wahren [Sun, 11 Nov 2018 20:23:57 +0000 (21:23 +0100)]
mmc: bcm2835: Terminate timeout work synchronously

It's better to make sure that the timeout work is really terminated
before calling mmc_request_done.

Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Acked-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
5 years agommc: bcm2835: Avoid possible races on data requests
Stefan Wahren [Sun, 11 Nov 2018 20:23:56 +0000 (21:23 +0100)]
mmc: bcm2835: Avoid possible races on data requests

There are two accesses on the data requests which are not protected by
the mutex. So fix this accordingly.

Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Acked-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
5 years agommc: bcm2835: Release DMA channel on driver unload
Stefan Wahren [Sun, 11 Nov 2018 20:23:55 +0000 (21:23 +0100)]
mmc: bcm2835: Release DMA channel on driver unload

We need to release the slave DMA channel during driver unload.

Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Acked-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
5 years agommc: bcm2835: Recover from MMC_SEND_EXT_CSD
Phil Elwell [Sun, 11 Nov 2018 20:23:54 +0000 (21:23 +0100)]
mmc: bcm2835: Recover from MMC_SEND_EXT_CSD

If the user issues an "mmc extcsd read", the SD controller receives
what it thinks is a SEND_IF_COND command with an unexpected data block.
The resulting operations leave the FSM stuck in READWAIT, a state which
persists until the MMC framework resets the controller, by which point
the root filesystem is likely to have been unmounted.

A less heavyweight solution is to detect the condition and nudge the
FSM by asserting the (self-clearing) FORCE_DATA_MODE bit.

Link: https://github.com/raspberrypi/linux/issues/2728
Signed-off-by: Phil Elwell <phil@raspberrypi.org>
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Acked-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
5 years agommc: bcm2835: reset host on timeout
Michal Suchanek [Sun, 11 Nov 2018 20:23:53 +0000 (21:23 +0100)]
mmc: bcm2835: reset host on timeout

The bcm2835 mmc host tends to lock up for unknown reason so reset it on
timeout. The upper mmc block layer tries retransimitting with single
blocks which tends to work out after a long wait.

This is better than giving up and leaving the machine broken for no
obvious reason.

Fixes: 660fc733bd74 ("mmc: bcm2835: Add new driver for the sdhost controller.")
Signed-off-by: Michal Suchanek <msuchanek@suse.de>
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Acked-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
5 years agommc: sdhci: imx: Use the slot GPIO descriptor
Linus Walleij [Mon, 12 Nov 2018 14:12:35 +0000 (15:12 +0100)]
mmc: sdhci: imx: Use the slot GPIO descriptor

Simplify things by making the i.MX SDHCI driver just use
slot GPIO with descriptors instead of passing around the global
GPIO numbers that we want to get rid of.

As it turns out, just one single board is using the platform
data to pass in GPIOs numbers for CD and WP, so we augment this
to use a machine descriptor table instead.

Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
5 years agommc: jz4740: Use GPIO descriptor for power
Linus Walleij [Mon, 12 Nov 2018 14:12:32 +0000 (15:12 +0100)]
mmc: jz4740: Use GPIO descriptor for power

The power GPIO line is passed with inversion flags and all from
the platform data. Switch to using an optional GPIO descriptor and
use this to switch the power.

Augment the only boardfile to pass in the proper "power" descriptor
in the GPIO descriptor machine table instead.

As the GPIO handling is now much simpler, we can cut down on some
overhead code.

Cc: Paul Cercueil <paul@crapouillou.net>
Cc: linux-mips@linux-mips.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Paul Burton <paul.burton@mips.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
5 years agommc: jz4740: Get CD/WP GPIOs from descriptors
Linus Walleij [Mon, 12 Nov 2018 14:12:31 +0000 (15:12 +0100)]
mmc: jz4740: Get CD/WP GPIOs from descriptors

Modifty the JZ4740 driver to retrieve card detect and write
protect GPIO pins from GPIO descriptors instead of hard-coded
global numbers. Augment the only board file using this in the
process and cut down on passed in platform data.

Preserve the code setting the caps2 flags for CD and WP
as active low or high since the slot GPIO code currently
ignores the gpiolib polarity inversion semantice and uses
the raw accessors to read the GPIO lines, but set the right
polarity flags in the descriptor table for jz4740.

Cc: Paul Cercueil <paul@crapouillou.net>
Cc: linux-mips@linux-mips.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Paul Burton <paul.burton@mips.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
5 years agommc: slot-gpio: Allocate GPIO labels dynamically
Linus Walleij [Mon, 12 Nov 2018 14:12:30 +0000 (15:12 +0100)]
mmc: slot-gpio: Allocate GPIO labels dynamically

The use of string pointers in the MMC slot GPIO context is
pretty dubious, allocating some 2*len extra bytes for each
label of the ro and wp pins.

Tidy this up using kasprintf() with dynamic allocation of
labels for these strings.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
5 years agommc: sdhci-msm: Re-initialize DLL if MCLK is gated dynamically
Veerabhadrarao Badiganti [Mon, 12 Nov 2018 06:52:17 +0000 (12:22 +0530)]
mmc: sdhci-msm: Re-initialize DLL if MCLK is gated dynamically

On few SDHCI-MSM controllers, the host controller's clock tuning
circuit may go out of sync if controller clocks are gated which
eventually will result in data CRC, command CRC/timeout errors.
To overcome this h/w limitation, the DLL needs to be re-initialized
and restored with its old settings once clocks are ungated.

Signed-off-by: Veerabhadrarao Badiganti <vbadigan@codeaurora.org>
Reviewed-by: Evan Green <evgreen@chromium.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
5 years agodt-bindings: mmc: sdhci-msm: Add SoC-specific compatible strings
Veerabhadrarao Badiganti [Mon, 12 Nov 2018 06:52:16 +0000 (12:22 +0530)]
dt-bindings: mmc: sdhci-msm: Add SoC-specific compatible strings

Add SoC-specific compatible strings for qcom-sdhci controller.

Signed-off-by: Veerabhadrarao Badiganti <vbadigan@codeaurora.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
5 years agommc: sdhci: Handle auto-command errors
Adrian Hunter [Thu, 15 Nov 2018 13:53:43 +0000 (15:53 +0200)]
mmc: sdhci: Handle auto-command errors

If the host controller supports auto-commands then enable the auto-command
error interrupt and handle it. In the case of auto-CMD23, the error is
treated the same as manual CMD23 error. In the case of auto-CMD12,
commands-during-transfer are not permitted, so the error handling is
treated the same as a data error.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
5 years agommc: sdhci: Rename SDHCI_ACMD12_ERR and SDHCI_INT_ACMD12ERR
Adrian Hunter [Thu, 15 Nov 2018 13:53:42 +0000 (15:53 +0200)]
mmc: sdhci: Rename SDHCI_ACMD12_ERR and SDHCI_INT_ACMD12ERR

The SDHCI_ACMD12_ERR register is used for auto-CMD23 and auto-CMD12
errors, as is the SDHCI_INT_ACMD12ERR interrupt bit. Rename them to
SDHCI_AUTO_CMD_STATUS and SDHCI_INT_AUTO_CMD_ERR respectively.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
5 years agommc: sdhci: Fix data command CRC error handling
Adrian Hunter [Thu, 15 Nov 2018 13:53:41 +0000 (15:53 +0200)]
mmc: sdhci: Fix data command CRC error handling

Existing data command CRC error handling is non-standard and does not work
with some Intel host controllers. Specifically, the assumption that the host
controller will continue operating normally after the error interrupt,
is not valid. Change the driver to handle the error in the same manner
as a data CRC error, taking care to ensure that the data line reset is
done for single or multi-block transfers, and it is done before
unmapping DMA.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
5 years agommc: bcm2835: Switch to SPDX identifier
Stefan Wahren [Sat, 10 Nov 2018 16:10:05 +0000 (17:10 +0100)]
mmc: bcm2835: Switch to SPDX identifier

Adopt the SPDX license identifier headers to ease license compliance
management.

Cc: Phil Elwell <phil@raspberrypi.org>
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
5 years agommc: renesas_sdhi: Whitelist R8A77990 SDHI
Marek Vasut [Mon, 5 Nov 2018 21:39:35 +0000 (22:39 +0100)]
mmc: renesas_sdhi: Whitelist R8A77990 SDHI

Whitelist R8A77990 E3 SoC in the SDHI driver. The SDHI core
present in the SoC is an 8tap variant of the Gen3 SDHI core.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Simon Horman <horms+renesas@verge.net.au>
Cc: Wolfram Sang <wsa@the-dreams.de>
Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: linux-renesas-soc@vger.kernel.org
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
5 years agommc: tmio: delete wait in tuning process
Masaharu Hayakawa [Wed, 31 Oct 2018 23:00:43 +0000 (00:00 +0100)]
mmc: tmio: delete wait in tuning process

The manual does not contain information that a wait is needed in the
tuning process, this might be a leftover from early development.
Removing the wait don't have any effect on operation so delete the wait
to shorten the initialization time.

Signed-off-by: Masaharu Hayakawa <masaharu.hayakawa.ry@renesas.com>
Signed-off-by: Takeshi Saito <takeshi.saito.xv@renesas.com>
[Niklas: fixup commit message]
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
5 years agommc: renesas_sdhi: remove workaround for HS400 clock
Niklas Söderlund [Wed, 31 Oct 2018 22:59:44 +0000 (23:59 +0100)]
mmc: renesas_sdhi: remove workaround for HS400 clock

The driver sets an incorrect clock and depends on the clock driver
knowledge of this incorrect setting to still set a 200Mhz SDn clock.
Instead of spreading the workaround between the two drivers the clock
driver should be made aware of the ES versions where the special clock
handling is needed no need to keep this workaround in the SDHI driver.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
5 years agommc: sdhci-cadence: include <linux/bits.h> instead of <linux/bitops.h>
Masahiro Yamada [Tue, 30 Oct 2018 11:05:06 +0000 (20:05 +0900)]
mmc: sdhci-cadence: include <linux/bits.h> instead of <linux/bitops.h>

The reason of including <linux/bitops.h> here is just for BIT() and
GENMASK() macros.

Since commit 8bd9cb51daac8 ("locking/atomics, asm-generic: Move some
macros from <linux/bitops.h> to a new <linux/bits.h> file"),
<linux/bits.h> is enough for such compile-time macros.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
5 years agommc: sdhci: Convert sdhci_allocate_bounce_buffer() to return void
Chunyan Zhang [Thu, 25 Oct 2018 02:12:36 +0000 (10:12 +0800)]
mmc: sdhci: Convert sdhci_allocate_bounce_buffer() to return void

The function sdhci_allocate_bounce_buffer() always return zero at
present, so there's no need to have a return value, that will also make
error path easier.

CC: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Chunyan Zhang <zhang.chunyan@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
5 years agodt-bindings: mmc: tmio_mmc: Document Renesas R7S9210
Chris Brandt [Wed, 24 Oct 2018 22:23:01 +0000 (17:23 -0500)]
dt-bindings: mmc: tmio_mmc: Document Renesas R7S9210

Document support for the RZ/A2 (R7S9210) SoC.

Signed-off-by: Chris Brandt <chris.brandt@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
5 years agommc: renesas_sdhi_internal_dmac: Add R7S9210 support
Chris Brandt [Wed, 24 Oct 2018 22:23:00 +0000 (17:23 -0500)]
mmc: renesas_sdhi_internal_dmac: Add R7S9210 support

The SDHI/MMC controller in the RZ/A2 is almost the same as R-Car gen3, but
with some minor differences.

Signed-off-by: Chris Brandt <chris.brandt@renesas.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
5 years agodt-bindings: mmc: fsl-imx-esdhc: add imx8qxp compatible string
A.s. Dong [Thu, 18 Oct 2018 18:19:24 +0000 (18:19 +0000)]
dt-bindings: mmc: fsl-imx-esdhc: add imx8qxp compatible string

Add imx8qxp compatible string

Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: linux-serial@vger.kernel.org
Cc: devicetree@vger.kernel.org
Cc: linux-mmc@vger.kernel.org
Cc: Haibo Chen <haibo.chen@nxp.com>
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
5 years agommc: atmel-mci: do not assume idle after atmci_request_end
Jonas Danielsson [Fri, 19 Oct 2018 14:40:05 +0000 (16:40 +0200)]
mmc: atmel-mci: do not assume idle after atmci_request_end

On our AT91SAM9260 board we use the same sdio bus for wifi and for the
sd card slot. This caused the atmel-mci to give the following splat on
the serial console:

  ------------[ cut here ]------------
  WARNING: CPU: 0 PID: 538 at drivers/mmc/host/atmel-mci.c:859 atmci_send_command+0x24/0x44
  Modules linked in:
  CPU: 0 PID: 538 Comm: mmcqd/0 Not tainted 4.14.76 #14
  Hardware name: Atmel AT91SAM9
  [<c000fccc>] (unwind_backtrace) from [<c000d3dc>] (show_stack+0x10/0x14)
  [<c000d3dc>] (show_stack) from [<c0017644>] (__warn+0xd8/0xf4)
  [<c0017644>] (__warn) from [<c0017704>] (warn_slowpath_null+0x1c/0x24)
  [<c0017704>] (warn_slowpath_null) from [<c033bb9c>] (atmci_send_command+0x24/0x44)
  [<c033bb9c>] (atmci_send_command) from [<c033e984>] (atmci_start_request+0x1f4/0x2dc)
  [<c033e984>] (atmci_start_request) from [<c033f3b4>] (atmci_request+0xf0/0x164)
  [<c033f3b4>] (atmci_request) from [<c0327108>] (mmc_start_request+0x280/0x2d0)
  [<c0327108>] (mmc_start_request) from [<c032800c>] (mmc_start_areq+0x230/0x330)
  [<c032800c>] (mmc_start_areq) from [<c03366f8>] (mmc_blk_issue_rw_rq+0xc4/0x310)
  [<c03366f8>] (mmc_blk_issue_rw_rq) from [<c03372c4>] (mmc_blk_issue_rq+0x118/0x5ac)
  [<c03372c4>] (mmc_blk_issue_rq) from [<c033781c>] (mmc_queue_thread+0xc4/0x118)
  [<c033781c>] (mmc_queue_thread) from [<c002daf8>] (kthread+0x100/0x118)
  [<c002daf8>] (kthread) from [<c000a580>] (ret_from_fork+0x14/0x34)
  ---[ end trace 594371ddfa284bd6 ]---

This is:
  WARN_ON(host->cmd);

This was fixed on our board by letting atmci_request_end determine what
state we are in. Instead of unconditionally setting it to STATE_IDLE on
STATE_END_REQUEST.

Signed-off-by: Jonas Danielsson <jonas@orbital-systems.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
5 years agommc: dw_mmc-bluefield: simplify the probe() function
Liming Sun [Fri, 19 Oct 2018 14:26:14 +0000 (10:26 -0400)]
mmc: dw_mmc-bluefield: simplify the probe() function

This commit removes the unnecessary of-node check since the
dw_mci_bluefield_match[] structure has only one entry.

Signed-off-by: Liming Sun <lsun@mellanox.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
5 years agoLinux 4.20-rc7
Linus Torvalds [Sun, 16 Dec 2018 23:46:55 +0000 (15:46 -0800)]
Linux 4.20-rc7

5 years agoMerge branch 'akpm' (patches from Andrew)
Linus Torvalds [Fri, 14 Dec 2018 23:35:30 +0000 (15:35 -0800)]
Merge branch 'akpm' (patches from Andrew)

Merge misc fixes from Andrew Morton:
 "11 fixes"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  scripts/spdxcheck.py: always open files in binary mode
  checkstack.pl: fix for aarch64
  userfaultfd: check VM_MAYWRITE was set after verifying the uffd is registered
  fs/iomap.c: get/put the page in iomap_page_create/release()
  hugetlbfs: call VM_BUG_ON_PAGE earlier in free_huge_page()
  memblock: annotate memblock_is_reserved() with __init_memblock
  psi: fix reference to kernel commandline enable
  arch/sh/include/asm/io.h: provide prototypes for PCI I/O mapping in asm/io.h
  mm/sparse: add common helper to mark all memblocks present
  mm: introduce common STRUCT_PAGE_MAX_SHIFT define
  alpha: fix hang caused by the bootmem removal

5 years agoscripts/spdxcheck.py: always open files in binary mode
Thierry Reding [Fri, 14 Dec 2018 22:17:24 +0000 (14:17 -0800)]
scripts/spdxcheck.py: always open files in binary mode

The spdxcheck script currently falls over when confronted with a binary
file (such as Documentation/logo.gif).  To avoid that, always open files
in binary mode and decode line-by-line, ignoring encoding errors.

One tricky case is when piping data into the script and reading it from
standard input.  By default, standard input will be opened in text mode,
so we need to reopen it in binary mode.

The breakage only happens with python3 and results in a
UnicodeDecodeError (according to Uwe).

Link: http://lkml.kernel.org/r/20181212131210.28024-1-thierry.reding@gmail.com
Fixes: 6f4d29df66ac ("scripts/spdxcheck.py: make python3 compliant")
Signed-off-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Jeremy Cline <jcline@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Joe Perches <joe@perches.com>
Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
5 years agocheckstack.pl: fix for aarch64
Qian Cai [Fri, 14 Dec 2018 22:17:20 +0000 (14:17 -0800)]
checkstack.pl: fix for aarch64

There is actually a space after "sp," like this,

    ffff2000080813c8:       a9bb7bfd        stp     x29, x30, [sp, #-80]!

Right now, checkstack.pl isn't able to print anything on aarch64,
because it won't be able to match the stating objdump line of a function
due to this missing space.  Hence, it displays every stack as zero-size.

After this patch, checkpatch.pl is able to match the start of a
function's objdump, and is then able to calculate each function's stack
correctly.

Link: http://lkml.kernel.org/r/20181207195843.38528-1-cai@lca.pw
Signed-off-by: Qian Cai <cai@lca.pw>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
5 years agouserfaultfd: check VM_MAYWRITE was set after verifying the uffd is registered
Andrea Arcangeli [Fri, 14 Dec 2018 22:17:17 +0000 (14:17 -0800)]
userfaultfd: check VM_MAYWRITE was set after verifying the uffd is registered

Calling UFFDIO_UNREGISTER on virtual ranges not yet registered in uffd
could trigger an harmless false positive WARN_ON.  Check the vma is
already registered before checking VM_MAYWRITE to shut off the false
positive warning.

Link: http://lkml.kernel.org/r/20181206212028.18726-2-aarcange@redhat.com
Cc: <stable@vger.kernel.org>
Fixes: 29ec90660d68 ("userfaultfd: shmem/hugetlbfs: only allow to register VM_MAYWRITE vmas")
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Reported-by: syzbot+06c7092e7d71218a2c16@syzkaller.appspotmail.com
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Acked-by: Hugh Dickins <hughd@google.com>
Acked-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
5 years agofs/iomap.c: get/put the page in iomap_page_create/release()
Piotr Jaroszynski [Fri, 14 Dec 2018 22:17:14 +0000 (14:17 -0800)]
fs/iomap.c: get/put the page in iomap_page_create/release()

migrate_page_move_mapping() expects pages with private data set to have
a page_count elevated by 1.  This is what used to happen for xfs through
the buffer_heads code before the switch to iomap in commit 82cb14175e7d
("xfs: add support for sub-pagesize writeback without buffer_heads").
Not having the count elevated causes move_pages() to fail on memory
mapped files coming from xfs.

Make iomap compatible with the migrate_page_move_mapping() assumption by
elevating the page count as part of iomap_page_create() and lowering it
in iomap_page_release().

It causes the move_pages() syscall to misbehave on memory mapped files
from xfs.  It does not not move any pages, which I suppose is "just" a
perf issue, but it also ends up returning a positive number which is out
of spec for the syscall.  Talking to Michal Hocko, it sounds like
returning positive numbers might be a necessary update to move_pages()
anyway though
(https://lkml.kernel.org/r/20181116114955.GJ14706@dhcp22.suse.cz).

I only hit this in tests that verify that move_pages() actually moved
the pages.  The test also got confused by the positive return from
move_pages() (it got treated as a success as positive numbers were not
expected and not handled) making it a bit harder to track down what's
going on.

Link: http://lkml.kernel.org/r/20181115184140.1388751-1-pjaroszynski@nvidia.com
Fixes: 82cb14175e7d ("xfs: add support for sub-pagesize writeback without buffer_heads")
Signed-off-by: Piotr Jaroszynski <pjaroszynski@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: William Kucharski <william.kucharski@oracle.com>
Cc: Darrick J. Wong <darrick.wong@oracle.com>
Cc: Brian Foster <bfoster@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
5 years agohugetlbfs: call VM_BUG_ON_PAGE earlier in free_huge_page()
Yongkai Wu [Fri, 14 Dec 2018 22:17:10 +0000 (14:17 -0800)]
hugetlbfs: call VM_BUG_ON_PAGE earlier in free_huge_page()

A stack trace was triggered by VM_BUG_ON_PAGE(page_mapcount(page), page)
in free_huge_page().  Unfortunately, the page->mapping field was set to
NULL before this test.  This made it more difficult to determine the
root cause of the problem.

Move the VM_BUG_ON_PAGE tests earlier in the function so that if they do
trigger more information is present in the page struct.

Link: http://lkml.kernel.org/r/1543491843-23438-1-git-send-email-nic_w@163.com
Signed-off-by: Yongkai Wu <nic_w@163.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: William Kucharski <william.kucharski@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
5 years agomemblock: annotate memblock_is_reserved() with __init_memblock
Yueyi Li [Fri, 14 Dec 2018 22:17:06 +0000 (14:17 -0800)]
memblock: annotate memblock_is_reserved() with __init_memblock

Found warning:

  WARNING: EXPORT symbol "gsi_write_channel_scratch" [vmlinux] version generation failed, symbol will not be versioned.
  WARNING: vmlinux.o(.text+0x1e0a0): Section mismatch in reference from the function valid_phys_addr_range() to the function .init.text:memblock_is_reserved()
  The function valid_phys_addr_range() references
  the function __init memblock_is_reserved().
  This is often because valid_phys_addr_range lacks a __init
  annotation or the annotation of memblock_is_reserved is wrong.

Use __init_memblock instead of __init.

Link: http://lkml.kernel.org/r/BLUPR13MB02893411BF12EACB61888E80DFAE0@BLUPR13MB0289.namprd13.prod.outlook.com
Signed-off-by: Yueyi Li <liyueyi@live.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
5 years agopsi: fix reference to kernel commandline enable
Baruch Siach [Fri, 14 Dec 2018 22:17:03 +0000 (14:17 -0800)]
psi: fix reference to kernel commandline enable

The kernel commandline parameter named in CONFIG_PSI_DEFAULT_DISABLED
help text contradicts the documentation in kernel-parameters.txt, and
the code.  Fix that.

Link: http://lkml.kernel.org/r/20181203213416.GA12627@cmpxchg.org
Fixes: e0c274472d ("psi: make disabling/enabling easier for vendor kernels")
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
5 years agoarch/sh/include/asm/io.h: provide prototypes for PCI I/O mapping in asm/io.h
Mark Brown [Fri, 14 Dec 2018 22:17:00 +0000 (14:17 -0800)]
arch/sh/include/asm/io.h: provide prototypes for PCI I/O mapping in asm/io.h

Most architectures provide prototypes for the PCI I/O mapping operations
when asm/io.h is included but SH doesn't currently do that, leading to
for example warnings in sound/pci/hda/patch_ca0132.c when pci_iomap() is
used on current -next.  Make SH more consistent with other architectures
by including asm-generic/pci_iomap.h in asm/io.h.

Link: http://lkml.kernel.org/r/20181106175142.27988-1-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Reported-by: kbuild test robot <lkp@intel.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Rich Felker <dalias@libc.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
5 years agomm/sparse: add common helper to mark all memblocks present
Logan Gunthorpe [Fri, 14 Dec 2018 22:16:57 +0000 (14:16 -0800)]
mm/sparse: add common helper to mark all memblocks present

Presently the arches arm64, arm and sh have a function which loops
through each memblock and calls memory present.  riscv will require a
similar function.

Introduce a common memblocks_present() function that can be used by all
the arches.  Subsequent patches will cleanup the arches that make use of
this.

Link: http://lkml.kernel.org/r/20181107205433.3875-3-logang@deltatee.com
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Acked-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Oscar Salvador <osalvador@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
5 years agomm: introduce common STRUCT_PAGE_MAX_SHIFT define
Logan Gunthorpe [Fri, 14 Dec 2018 22:16:53 +0000 (14:16 -0800)]
mm: introduce common STRUCT_PAGE_MAX_SHIFT define

This define is used by arm64 to calculate the size of the vmemmap
region.  It is defined as the log2 of the upper bound on the size of a
struct page.

We move it into mm_types.h so it can be defined properly instead of set
and checked with a build bug.  This also allows us to use the same
define for riscv.

Link: http://lkml.kernel.org/r/20181107205433.3875-2-logang@deltatee.com
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Acked-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
5 years agoalpha: fix hang caused by the bootmem removal
Mike Rapoport [Fri, 14 Dec 2018 22:16:50 +0000 (14:16 -0800)]
alpha: fix hang caused by the bootmem removal

The conversion of alpha to memblock as the early memory manager caused
boot to hang as described at [1].

The issue is caused because for CONFIG_DISCTONTIGMEM=y case,
memblock_add() is called using memory start PFN that had been rounded
down to the nearest 8Mb and it caused memblock to see more memory that
is actually present in the system.

Besides, memblock allocates memory from high addresses while bootmem was
using low memory, which broke the assumption that early allocations are
always accessible by the hardware.

This patch ensures that memblock_add() is using the correct PFN for the
memory start and forces memblock to use bottom-up allocations.

[1] https://lkml.org/lkml/2018/11/22/1032

Link: http://lkml.kernel.org/r/1543233216-25833-1-git-send-email-rppt@linux.ibm.com
Reported-by: Meelis Roos <mroos@linux.ee>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Tested-by: Meelis Roos <mroos@linux.ee>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
5 years agoMerge tag 'for-linus-20181214' of git://git.kernel.dk/linux-block
Linus Torvalds [Fri, 14 Dec 2018 20:18:30 +0000 (12:18 -0800)]
Merge tag 'for-linus-20181214' of git://git.kernel.dk/linux-block

Pull block fixes from Jens Axboe:
 "Three small fixes for this week. contains:

   - spectre indexing fix for aio (Jeff)

   - fix for the previous zeroing bio fix, we don't need it for user
     mapped pages, and in fact it breaks some applications if we do
     (Keith)

   - allocation failure fix for null_blk with zoned (Shin'ichiro)"

* tag 'for-linus-20181214' of git://git.kernel.dk/linux-block:
  block: Fix null_blk_zoned creation failure with small number of zones
  aio: fix spectre gadget in lookup_ioctx
  block/bio: Do not zero user pages

5 years agoMerge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Fri, 14 Dec 2018 20:14:41 +0000 (12:14 -0800)]
Merge tag 'clk-fixes-for-linus' of git://git./linux/kernel/git/clk/linux

Pull clk fix from Stephen Boyd:
 "One fix for the qcom QCS404 clk driver that was merged for this
  release.

  It specified the wrong parent for a PLL so a part of the clk tree
  wasn't rooted correctly. This fixes it by using the right name"

* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  clk: qcom: qcs404: Fix gpll0_out_main parent

5 years agoMerge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Linus Torvalds [Fri, 14 Dec 2018 17:36:41 +0000 (09:36 -0800)]
Merge tag 'arm64-fixes' of git://git./linux/kernel/git/arm64/linux

Pull arm64 fix from Catalin Marinas:
 "Invalidate the caches before clearing the DMA buffer via the
  non-cacheable alias in the FORCE_CONTIGUOUS case"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: dma-mapping: Fix FORCE_CONTIGUOUS buffer clearing

5 years agoMerge tag 'powerpc-4.20-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc...
Linus Torvalds [Fri, 14 Dec 2018 17:33:34 +0000 (09:33 -0800)]
Merge tag 'powerpc-4.20-4' of git://git./linux/kernel/git/powerpc/linux

Pull powerpc fixes from Michael Ellerman:
 "One notable fix for our change to split pt_regs between user/kernel,
  we forgot to update BPF to use the user-visible type which was an ABI
  break for BPF programs.

  A slightly ugly but minimal fix to do_syscall_trace_enter() so that we
  use tracehook_report_syscall_entry() properly. We'll rework the code
  in next to avoid the empty if body.

  Seven commits fixing bugs in the new papr_scm (Storage Class Memory)
  driver. The driver was finally able to be tested on the other
  hypervisor which exposed several bugs. The fixes are all fairly
  minimal at least.

  Fix a crash in our MSI code if an MSI-capable device is plugged into a
  non-MSI capable PHB, only seen on older hardware (MPC8378).

  Fix our legacy serial code to look for "stdout-path" since the device
  trees were updated to use that instead of "linux,stdout-path".

  A change to the COFF zImage code to fix booting old powermacs.

  A couple of minor build fixes.

  Thanks to: Benjamin Herrenschmidt, Daniel Axtens, Dmitry V. Levin,
  Elvira Khabirova, Oliver O'Halloran, Paul Mackerras, Radu Rendec, Rob
  Herring, Sandipan Das"

* tag 'powerpc-4.20-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/ptrace: replace ptrace_report_syscall() with a tracehook call
  powerpc/mm: Fallback to RAM if the altmap is unusable
  powerpc/papr_scm: Use ibm,unit-guid as the iset cookie
  powerpc/papr_scm: Fix DIMM device registration race
  powerpc/papr_scm: Remove endian conversions
  powerpc/papr_scm: Update DT properties
  powerpc/papr_scm: Fix resource end address
  powerpc/papr_scm: Use depend instead of select
  powerpc/bpf: Fix broken uapi for BPF_PROG_TYPE_PERF_EVENT
  powerpc/boot: Fix build failures with -j 1
  powerpc: Look for "stdout-path" when setting up legacy consoles
  powerpc/msi: Fix NULL pointer access in teardown code
  powerpc/mm: Fix linux page tables build with some configs
  powerpc: Fix COFF zImage booting on old powermacs

5 years agoMerge tag 'ceph-for-4.20-rc7' of https://github.com/ceph/ceph-client
Linus Torvalds [Fri, 14 Dec 2018 17:22:14 +0000 (09:22 -0800)]
Merge tag 'ceph-for-4.20-rc7' of https://github.com/ceph/ceph-client

Pull ceph fix from Ilya Dryomov:
 "Luis discovered a problem with the new copyfrom offload on the server
  side. Disable it for now"

* tag 'ceph-for-4.20-rc7' of https://github.com/ceph/ceph-client:
  ceph: make 'nocopyfrom' a default mount option

5 years agoMerge tag 'pinctrl-v4.20-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw...
Linus Torvalds [Fri, 14 Dec 2018 17:17:17 +0000 (09:17 -0800)]
Merge tag 'pinctrl-v4.20-3' of git://git./linux/kernel/git/linusw/linux-pinctrl

Pull pin control fixes from Linus Walleij:
 "Three pin control fixes for the v4.20 series. Just odd drivers, so
  nothing particularly interesting:

   - Set the tile property on Qualcomm SDM60.

   - Fix up enable register calculation for the Meson

   - Fix an IRQ offset on the Sunxi (Allwinner)"

* tag 'pinctrl-v4.20-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: sunxi: a83t: Fix IRQ offset typo for PH11
  pinctrl: meson: fix pull enable register calculation
  pinctrl: sdm660: Set tile property for pingroups

5 years agoMerge tag 'drm-fixes-2018-12-14' of git://anongit.freedesktop.org/drm/drm
Linus Torvalds [Fri, 14 Dec 2018 17:12:02 +0000 (09:12 -0800)]
Merge tag 'drm-fixes-2018-12-14' of git://anongit.freedesktop.org/drm/drm

Pull drm fixes from Dave Airlie:
 "While I hoped things would calm down, the world hasn't joined with me,
  but it's a few things scattered over a wide area. The i915 workarounds
  regression fix is probably the largest, the rest are more usual sized.
  We also get some new AMD PCI IDs.

  There is also a patch in here to MAINTAINERS to added Daniel as an
  official DRM toplevel co-maintainer, he's decided he wants to step up
  and share the glory, and he'll likely process next weeks fixes while
  I'm away on holidays.

  Summary:

  amdgpu:

   - some new PCI IDs

   - fixed firmware image updates

   - power management fixes

   - locking warning fix

  nouveau:

   - framebuffer flushing fix

   - memory leak fix

   - tegra device init regression fix

  vmwgfx:

   - OOM kernel memory fix

   - excess return in function fix

  i915:

   - the biggest fix is a regression fix where workarounds weren't
     getting reapplied after a gpu hang causing further crashing, this
     fixes the workaround application to make it happen again

   - GPU hang fixes for Braswell and some GEN3 GPUs

   - GVT fix for broadwell tiling

  rockchip:

   - revert to fix a regression causing a WARN on shutdown

  mediatek:

   - avoid crash attaching to non-existant bridges"

* tag 'drm-fixes-2018-12-14' of git://anongit.freedesktop.org/drm/drm: (23 commits)
  drm/vmwgfx: Protect from excessive execbuf kernel memory allocations v3
  MAINTAINERS: Daniel for drm co-maintainer
  drm/amdgpu: drop fclk/gfxclk ratio setting
  drm/vmwgfx: remove redundant return ret statement
  drm/i915: Flush GPU relocs harder for gen3
  drm/i915: Allocate a common scratch page
  drm/i915/execlists: Apply a full mb before execution for Braswell
  drm/nouveau/kms: Fix memory leak in nv50_mstm_del()
  drm/nouveau/kms/nv50-: also flush fb writes when rewinding push buffer
  drm/amdgpu: Fix DEBUG_LOCKS_WARN_ON(depth <= 0) in amdgpu_ctx.lock
  Revert "drm/rockchip: Allow driver to be shutdown on reboot/kexec"
  drm/nouveau/drm/nouveau: tegra: Call nouveau_drm_device_init()
  drm/amdgpu/powerplay: Apply avfs cks-off voltages on VI
  drm/amdgpu: update SMC firmware image for polaris10 variants
  drm/amdkfd: add new vega20 pci id
  drm/amdkfd: add new vega10 pci ids
  drm/amdgpu: add some additional vega20 pci ids
  drm/amdgpu: add some additional vega10 pci ids
  drm/amdgpu: update smu firmware images for VI variants (v2)
  drm/i915: Introduce per-engine workarounds
  ...

5 years agoMerge tag 'xarray-4.20-rc7' of git://git.infradead.org/users/willy/linux-dax
Linus Torvalds [Fri, 14 Dec 2018 00:35:58 +0000 (16:35 -0800)]
Merge tag 'xarray-4.20-rc7' of git://git.infradead.org/users/willy/linux-dax

Pull XArray fixes from Matthew Wilcox:
 "Two bugfixes, each with test-suite updates, two improvements to the
  test-suite without associated bugs, and one patch adding a missing
  API"

* tag 'xarray-4.20-rc7' of git://git.infradead.org/users/willy/linux-dax:
  XArray: Fix xa_alloc when id exceeds max
  XArray tests: Check iterating over multiorder entries
  XArray tests: Handle larger indices more elegantly
  XArray: Add xa_cmpxchg_irq and xa_cmpxchg_bh
  radix tree: Don't return retry entries from lookup

5 years agoMerge tag 'linux-kselftest-4.20-rc7' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Thu, 13 Dec 2018 20:57:21 +0000 (12:57 -0800)]
Merge tag 'linux-kselftest-4.20-rc7' of git://git./linux/kernel/git/shuah/linux-kselftest

Pull Kselftest fix from Shuah Khan:
 "A single fix for a seccomp test from Kees Cook."

* tag 'linux-kselftest-4.20-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  selftests/seccomp: Remove SIGSTOP si_pid check

5 years agoMerge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux...
Linus Torvalds [Thu, 13 Dec 2018 20:02:41 +0000 (12:02 -0800)]
Merge branch 'fixes' of git://git./linux/kernel/git/evalenti/linux-soc-thermal

Pull thermal fixes from Eduardo Valentin:
 "Fixes for STM and HISI thermal drivers"

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal:
  thermal: stm32: Fix stm_thermal_read_factory_settings
  thermal: stm32: read factory settings inside stm_thermal_prepare
  thermal/drivers/hisi: Fix number of sensors on hi3660
  thermal/drivers/hisi: Fix wrong platform_get_irq_byname()

5 years agoMerge branch 'vmwgfx-fixes-4.20' of git://people.freedesktop.org/~thomash/linux into...
Dave Airlie [Thu, 13 Dec 2018 19:19:25 +0000 (05:19 +1000)]
Merge branch 'vmwgfx-fixes-4.20' of git://people.freedesktop.org/~thomash/linux into drm-fixes

One regression fix for avoiding kernel OOM, one cleanup return fix.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Hellstrom <thellstrom@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181213122815.10581-1-thellstrom@vmware.com
5 years agoXArray: Fix xa_alloc when id exceeds max
Matthew Wilcox [Thu, 13 Dec 2018 18:57:42 +0000 (13:57 -0500)]
XArray: Fix xa_alloc when id exceeds max

Specifying a starting ID greater than the maximum ID isn't something
attempted very often, but it should fail.  It was succeeding due to
xas_find_marked() returning the wrong error state, so add tests for
both xa_alloc() and xas_find_marked().

Fixes: b803b42823d0 ("xarray: Add XArray iterators")
Signed-off-by: Matthew Wilcox <willy@infradead.org>
5 years agoMerge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Linus Torvalds [Thu, 13 Dec 2018 19:02:23 +0000 (11:02 -0800)]
Merge tag 'for-linus' of git://git./linux/kernel/git/rdma/rdma

Pull rdma fixes from Doug Ledford:
 "We have 5 small fixes for this pull request. One is a performance
  regression, so not necessarily strictly a fix, but it was small and
  reasonable and claimed to avoid thrashing in the scheduler, so I took
  it. The remaining are all legitimate fixes that match the "we take
  fixes any time" criteria.

  Summary:

   - One performance regression for hfi1

   - One kasan fix for hfi1

   - A couple mlx5 fixes

   - A core oops fix"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
  IB/core: Fix oops in netdev_next_upper_dev_rcu()
  IB/mlx5: Block DEVX umem from the non applicable cases
  IB/mlx5: Fix implicit ODP interrupted page fault
  IB/hfi1: Fix an out-of-bounds access in get_hw_stats
  IB/hfi1: Fix a latency issue for small messages

5 years agoMerge tag 'mmc-v4.20-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Linus Torvalds [Thu, 13 Dec 2018 18:59:02 +0000 (10:59 -0800)]
Merge tag 'mmc-v4.20-rc5' of git://git./linux/kernel/git/ulfh/mmc

Pull mmc fixes from Ulf Hansson:
 "MMC core:
   - Fixup RPMB requests to use mrq->sbc when sending CMD23

  MMC host:
   - omap: Fix broken MMC/SD on OMAP15XX/OMAP5910/OMAP310

   - sdhci-omap: Fix DCRC error handling during tuning

   - sdhci: Fixup the timeout check window for clock and reset"

* tag 'mmc-v4.20-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  mmc: sdhci: fix the timeout check window for clock and reset
  mmc: sdhci-omap: Fix DCRC error handling during tuning
  MMC: OMAP: fix broken MMC on OMAP15XX/OMAP5910/OMAP310
  mmc: core: use mrq->sbc when sending CMD23 for RPMB

5 years agoMerge tag 'sound-4.20-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai...
Linus Torvalds [Thu, 13 Dec 2018 18:54:13 +0000 (10:54 -0800)]
Merge tag 'sound-4.20-rc7' of git://git./linux/kernel/git/tiwai/sound

Pull sound fixes from Takashi Iwai:
 "Only usual suspects here: a few more fixups for Realtek HD-audio on
  various PCs, including a regression fix in the previous fix for Lenovo
  X1 Carbon, as well as a typo fix in the recent Fireface patch"

* tag 'sound-4.20-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda/realtek: Enable audio jacks of ASUS UX433FN/UX333FA with ALC294
  ALSA: hda/realtek: Enable audio jacks of ASUS UX533FD with ALC294
  ALSA: hda/realtek: ALC294 mic and headset-mode fixups for ASUS X542UN
  ALSA: fireface: fix reference to wrong register for clock configuration
  ALSA: hda/realtek - Fix the mute LED regresion on Lenovo X1 Carbon
  ALSA: hda/realtek - Fixed headphone issue for ALC700

5 years agodrm/vmwgfx: Protect from excessive execbuf kernel memory allocations v3
Thomas Hellstrom [Wed, 12 Dec 2018 10:52:08 +0000 (11:52 +0100)]
drm/vmwgfx: Protect from excessive execbuf kernel memory allocations v3

With the new validation code, a malicious user-space app could
potentially submit command streams with enough buffer-object and resource
references in them to have the resulting allocated validion nodes and
relocations make the kernel run out of GFP_KERNEL memory.

Protect from this by having the validation code reserve TTM graphics
memory when allocating.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Deepak Rawat <drawat@vmware.com>
---
v2: Removed leftover debug printouts

5 years agoMerge tag 'for-4.20/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device...
Linus Torvalds [Thu, 13 Dec 2018 02:29:24 +0000 (18:29 -0800)]
Merge tag 'for-4.20/dm-fixes' of git://git./linux/kernel/git/device-mapper/linux-dm

Pull device mapper fixes from Mike Snitzer:

 - Fix DM cache metadata to verify that a cache has block before trying
   to continue with operation that requires them.

 - Fix bio-based DM core's dm_make_request() to properly impose device
   limits on individual bios by making use of blk_queue_split().

 - Fix long-standing race with how DM thinp notified userspace of
   thin-pool mode state changes before they were actually made.

 - Fix the zoned target's bio completion handling; this is a fairly
   invassive fix at this stage but it is localized to the zoned target.
   Any zoned target users will benefit from this fix.

* tag 'for-4.20/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm thin: bump target version
  dm thin: send event about thin-pool state change _after_ making it
  dm zoned: Fix target BIO completion handling
  dm: call blk_queue_split() to impose device limits on bios
  dm cache metadata: verify cache has blocks in blocks_are_clean_separate_dirty()

5 years agoMerge tag 'media/v4.20-5' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab...
Linus Torvalds [Thu, 13 Dec 2018 02:24:32 +0000 (18:24 -0800)]
Merge tag 'media/v4.20-5' of git://git./linux/kernel/git/mchehab/linux-media

Pull media fixes from Mauro Carvalho Chehab:

 - one regression at vsp1 driver

 - some last time changes for the upcoming request API logic and for
   stateless codec support. As the stateless codec "cedrus" driver is at
   staging, don't apply the MPEG controls as part of the main V4L2 API,
   as those may not be ready for production yet.

* tag 'media/v4.20-5' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
  media: Add a Kconfig option for the Request API
  media: extended-controls.rst: add note to the MPEG2 state controls
  media: mpeg2-ctrls.h: move MPEG2 state controls to non-public header
  media: vicodec: set state resolution from raw format
  media: vivid: drop v4l2_ctrl_request_complete() from start_streaming
  media: vb2: don't unbind/put the object when going to state QUEUED
  media: vb2: keep a reference to the request until dqbuf
  media: vb2: skip request checks for VIDIOC_PREPARE_BUF
  media: vb2: don't call __vb2_queue_cancel if vb2_start_streaming failed
  media: cedrus: Fix a NULL vs IS_ERR() check
  media: vsp1: Fix LIF buffer thresholds

5 years agoMerge tag 'ovl-fixes-4.20-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/mszer...
Linus Torvalds [Thu, 13 Dec 2018 02:19:44 +0000 (18:19 -0800)]
Merge tag 'ovl-fixes-4.20-rc7' of git://git./linux/kernel/git/mszeredi/vfs

Pull overlayfs fixes from Miklos Szeredi:
 "Needed to revert a patch, because it possibly introduces a security
  hole. Since the patch is basically a conceptual cleanup, not a bug
  fix, it's safe to revert. I'm not giving up on this, and discussions
  seemed to have reached an agreement over how to move forward, but that
  can wait 'till the next release.

  The other two patches are fixes for bugs introduced in recent
  releases"

* tag 'ovl-fixes-4.20-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
  Revert "ovl: relax permission checking on underlying layers"
  ovl: fix decode of dir file handle with multi lower layers
  ovl: fix missing override creds in link of a metacopy upper

5 years agoMerge tag 'fuse-fixes-4.20-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Thu, 13 Dec 2018 02:17:35 +0000 (18:17 -0800)]
Merge tag 'fuse-fixes-4.20-rc7' of git://git./linux/kernel/git/mszeredi/fuse

Pull fuse fixes from Miklos Szeredi:
 "There's one patch fixing a minor but long lived bug, the others are
  fixing regressions introduced in this cycle"

* tag 'fuse-fixes-4.20-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
  fuse: continue to send FUSE_RELEASEDIR when FUSE_OPEN returns ENOSYS
  fuse: Fix memory leak in fuse_dev_free()
  fuse: fix revalidation of attributes for permission check
  fuse: fix fsync on directory
  fuse: Add bad inode check in fuse_destroy_inode()

5 years agoMerge tag 'trace-v4.20-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt...
Linus Torvalds [Thu, 13 Dec 2018 02:15:29 +0000 (18:15 -0800)]
Merge tag 'trace-v4.20-rc6' of git://git./linux/kernel/git/rostedt/linux-trace

Pull tracing fixes from Steven Rostedt:
 "While running various ftrace tests on new development code, the
  kmemleak detector found some allocations that were not freed
  correctly.

  This fixes a couple of leaks in the event trigger code as well as in
  adding function trace filters in trace instances"

* tag 'trace-v4.20-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  tracing: Fix memory leak of instance function hash filters
  tracing: Fix memory leak in set_trigger_filter()
  tracing: Fix memory leak in create_filter()

5 years agoMerge branch 'mediatek-drm-fixes-4.20' of https://github.com/ckhu-mediatek/linux...
Dave Airlie [Wed, 12 Dec 2018 23:55:05 +0000 (09:55 +1000)]
Merge branch 'mediatek-drm-fixes-4.20' of https://github.com/ckhu-mediatek/linux.git-tags into drm-fixes

Single bridge attachment fix.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: CK Hu <ck.hu@mediatek.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1544407975.18825.3.camel@mtksdaap41
5 years agoMAINTAINERS: Daniel for drm co-maintainer
Daniel Vetter [Mon, 10 Dec 2018 10:30:01 +0000 (11:30 +0100)]
MAINTAINERS: Daniel for drm co-maintainer

lkml and Linus gained a CoC, and it's serious this time. Which means
my no 1 reason for declining to officially step up as drm maintainer
is gone, and I didn't find any new good excuse.

I chatted with a few people in private already, and the biggest
concern is that I mislay my community hat and start running around
with my intel hat only. Or some other convenient abuse of trust.

That's why this patch doesn't just need a lot of acks that mean "yeah
seems fine to me", but a lot of acks that mean "yeah we'll tell you
when you're over the line and usurp you from that comfy chair if you
don't get it". Which I think we've been done a fairly good job here at
dri-devel in general, but better to be clear.

Rough idea is that I'll do this for maybe 2-3 years, helping Dave
figure out a group model for drm overall. And getting the tooling and
infrastructure for that off the ground. Then step down again because
some other shiny thing that needs chasing. Of course as plans tend to
do, this one will probably pan out a bit different in reality.

Cc: David Airlie <airlied@linux.ie>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Eric Anholt <eric@anholt.net>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Daniel Vetter <daniel@ffwll.ch>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Acked-by: Thomas Hellstrom <thellstrom@vmware.com>
Acked-by: Sean Paul <sean@poorly.run>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181210103001.30549-1-daniel.vetter@ffwll.ch
5 years agoMerge branch 'linux-4.20' of git://github.com/skeggsb/linux into drm-fixes
Dave Airlie [Wed, 12 Dec 2018 23:32:41 +0000 (09:32 +1000)]
Merge branch 'linux-4.20' of git://github.com/skeggsb/linux into drm-fixes

Three fixes:
tegra regression fix
display flushing fix
mst cleanup fix.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Ben Skeggs <skeggsb@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CACAvsv7WCPzjQZonk+eS1FgEUKirz-4LOrVpMUVMM=D-GjbVpg@mail.gmail.com
5 years agoMerge branch 'drm-fixes-4.20' of git://people.freedesktop.org/~agd5f/linux into drm...
Dave Airlie [Wed, 12 Dec 2018 23:24:18 +0000 (09:24 +1000)]
Merge branch 'drm-fixes-4.20' of git://people.freedesktop.org/~agd5f/linux into drm-fixes

Fixes for 4.20:
- Stability fixes for new polaris variants (e.g., RX590)
- New vega pci ids
- Vega20 smu fix
- Ctx locking fix

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181212203022.3054-1-alexander.deucher@amd.com
5 years agoMerge tag 'drm-misc-fixes-2018-12-12' of git://anongit.freedesktop.org/drm/drm-misc...
Dave Airlie [Wed, 12 Dec 2018 21:25:00 +0000 (07:25 +1000)]
Merge tag 'drm-misc-fixes-2018-12-12' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes

- rockchip: Revert change causing WARN on shutdown (Brian)

Cc: Brian Norris <briannorris@chromium.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Sean Paul <sean@poorly.run>
Link: https://patchwork.freedesktop.org/patch/msgid/20181212204309.GA150523@art_vandelay
5 years agoMerge tag 'drm-intel-fixes-2018-12-12-1' of git://anongit.freedesktop.org/drm/drm...
Dave Airlie [Wed, 12 Dec 2018 21:22:47 +0000 (07:22 +1000)]
Merge tag 'drm-intel-fixes-2018-12-12-1' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes

- Two fixes to avoid GPU hangs (on Braswell and Gen3)

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181212134010.GA18900@jlahtine-desk.ger.corp.intel.com
5 years agoMerge tag 'drm-intel-fixes-2018-12-07' of git://anongit.freedesktop.org/drm/drm-intel...
Dave Airlie [Wed, 12 Dec 2018 21:21:29 +0000 (07:21 +1000)]
Merge tag 'drm-intel-fixes-2018-12-07' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes

- Fix for system crash after GPU hang (Bugzilla #107945)
- GVT fix for guest graphics corruption (https://github.com/intel/gvt-linux/issues/61)

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181207104352.GA18214@jlahtine-desk.ger.corp.intel.com
5 years agodrm/amdgpu: drop fclk/gfxclk ratio setting
Evan Quan [Wed, 12 Dec 2018 06:56:14 +0000 (14:56 +0800)]
drm/amdgpu: drop fclk/gfxclk ratio setting

Since this is not needed any more on the latest SMC firmware.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
5 years agoIB/core: Fix oops in netdev_next_upper_dev_rcu()
Mark Zhang [Wed, 5 Dec 2018 13:50:49 +0000 (15:50 +0200)]
IB/core: Fix oops in netdev_next_upper_dev_rcu()

When support for bonding of RoCE devices was added, there was
necessarily a link between the RoCE device and the paired netdevice that
was part of the bond.  If you remove the mlx4_en module, that paired
association is broken (the RoCE device is still present but the paired
netdevice has been released).  We need to account for this in
is_upper_ndev_bond_master_filter() and filter out those links with a
broken pairing or else we later oops in netdev_next_upper_dev_rcu().

Fixes: 408f1242d940 ("IB/core: Delete lower netdevice default GID entries in bonding scenario")
Signed-off-by: Mark Zhang <markz@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
5 years agodm thin: bump target version
Mike Snitzer [Wed, 12 Dec 2018 14:39:54 +0000 (09:39 -0500)]
dm thin: bump target version

Decoupled version bump from commit f6c367585d0 ("dm thin: send event
about thin-pool state change _after_ making it") because version bumps
just create conflicts when backporting to the stable trees.

Signed-off-by: Mike Snitzer <snitzer@redhat.com>
5 years agodrm/vmwgfx: remove redundant return ret statement
Colin Ian King [Thu, 4 Oct 2018 17:49:53 +0000 (18:49 +0100)]
drm/vmwgfx: remove redundant return ret statement

The return statement is redundant as there is a return statement
immediately before it so we have dead code that can be removed.
Also remove the unused declaration of ret.

Detected by CoverityScan, CID#1473793 ("Structurally dead code")

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
5 years agodrm/i915: Flush GPU relocs harder for gen3
Chris Wilson [Fri, 7 Dec 2018 13:40:37 +0000 (13:40 +0000)]
drm/i915: Flush GPU relocs harder for gen3

Adding an extra MI_STORE_DWORD_IMM to the gpu relocation path for gen3
was good, but still not good enough. To survive 24+ hours under test we
needed to perform not one, not two but three extra store-dw. Doing so
for each GPU relocation was a little unsightly and since we need to
worry about userspace hitting the same issues, we should apply the dummy
store-dw into the EMIT_FLUSH.

Fixes: 7dd4f6729f92 ("drm/i915: Async GPU relocation processing")
References: 7fa28e146994 ("drm/i915: Write GPU relocs harder with gen3")
Testcase: igt/gem_tiled_fence_blits # blb/pnv
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181207134037.11848-1-chris@chris-wilson.co.uk
(cherry picked from commit a889580c087a9cf91fddb3832ece284174214183)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
5 years agodrm/i915: Allocate a common scratch page
Chris Wilson [Tue, 4 Dec 2018 14:15:16 +0000 (14:15 +0000)]
drm/i915: Allocate a common scratch page

Currently we allocate a scratch page for each engine, but since we only
ever write into it for post-sync operations, it is not exposed to
userspace nor do we care for coherency. As we then do not care about its
contents, we can use one page for all, reducing our allocations and
avoid complications by not assuming per-engine isolation.

For later use, it simplifies engine initialisation (by removing the
allocation that required struct_mutex!) and means that we can always rely
on there being a scratch page.

v2: Check that we allocated a large enough scratch for I830 w/a

Fixes: 06e562e7f515 ("drm/i915/ringbuffer: Delay after EMIT_INVALIDATE for gen4/gen5") # v4.18.20
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108850
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181204141522.13640-1-chris@chris-wilson.co.uk
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: <stable@vger.kernel.org> # v4.18.20+
(cherry picked from commit 5179749925933575a67f9d8f16d0cc204f98a29f)
[Joonas: Use new function in gen9_init_indirectctx_bb too]
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
5 years agodrm/i915/execlists: Apply a full mb before execution for Braswell
Chris Wilson [Thu, 6 Dec 2018 08:44:31 +0000 (08:44 +0000)]
drm/i915/execlists: Apply a full mb before execution for Braswell

Braswell is really picky about having our writes posted to memory before
we execute or else the GPU may see stale values. A wmb() is insufficient
as it only ensures the writes are visible to other cores, we need a full
mb() to ensure the writes are in memory and visible to the GPU.

The most frequent failure in flushing before execution is that we see
stale PTE values and execute the wrong pages.

References: 987abd5c62f9 ("drm/i915/execlists: Force write serialisation into context image vs execution")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: stable@vger.kernel.org
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181206084431.9805-3-chris@chris-wilson.co.uk
(cherry picked from commit 490b8c65b9db45896769e1095e78725775f47b3e)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>