Manish Chopra [Tue, 5 Nov 2019 05:51:11 +0000 (21:51 -0800)]
bnx2x: Fix PF-VF communication over multi-cos queues.
[ Upstream commit
dc5a3d79c345871439ffe72550b604fcde9770e1 ]
PF driver doesn't enable tx-switching for all cos queues/clients,
which causes packets drop from PF to VF. Fix this by enabling
tx-switching on all cos queues/clients.
Signed-off-by: Manish Chopra <manishc@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Marcel Holtmann [Thu, 24 Oct 2019 17:40:42 +0000 (19:40 +0200)]
rfkill: allocate static minor
[ Upstream commit
8670b2b8b029a6650d133486be9d2ace146fd29a ]
udev has a feature of creating /dev/<node> device-nodes if it finds
a devnode:<node> modalias. This allows for auto-loading of modules that
provide the node. This requires to use a statically allocated minor
number for misc character devices.
However, rfkill uses dynamic minor numbers and prevents auto-loading
of the module. So allocate the next static misc minor number and use
it for rfkill.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Link: https://lore.kernel.org/r/20191024174042.19851-1-marcel@holtmann.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Lucas Stach [Tue, 29 Oct 2019 11:42:35 +0000 (11:42 +0000)]
nvmem: imx-ocotp: reset error status on probe
[ Upstream commit
c33c585f1b3a99d53920bdac614aca461d8db06f ]
If software running before the OCOTP driver is loaded left the
controller with the error status pending, the driver will never
be able to complete the read timing setup. Reset the error status
on probe to make sure the controller is in usable state.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20191029114240.14905-6-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Vandana BN [Tue, 22 Oct 2019 07:51:40 +0000 (04:51 -0300)]
media: v4l2-core: fix touch support in v4l_g_fmt
[ Upstream commit
545b618cfb5cadacd00c25066b9a36540e5ca9e9 ]
v4l_s_fmt, for VFL_TYPE_TOUCH, sets unneeded members of
the v4l2_pix_format structure to default values.This was
missing in v4l_g_fmt, which would lead to failures in
v4l2-compliance tests.
Signed-off-by: Vandana BN <bnvandana@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kangjie Lu [Fri, 18 Oct 2019 04:47:00 +0000 (01:47 -0300)]
media: rcar_drif: fix a memory disclosure
[ Upstream commit
d39083234c60519724c6ed59509a2129fd2aed41 ]
"f->fmt.sdr.reserved" is uninitialized. As other peer drivers
like msi2500 and airspy do, the fix initializes it to avoid
memory disclosures.
Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Manjunath Patil [Sat, 5 Oct 2019 15:20:03 +0000 (08:20 -0700)]
ixgbe: protect TX timestamping from API misuse
[ Upstream commit
07066d9dc3d2326fbad8f7b0cb0120cff7b7dedb ]
HW timestamping can only be requested for a packet if the NIC is first
setup via ioctl(SIOCSHWTSTAMP). If this step was skipped, then the ixgbe
driver still allowed TX packets to request HW timestamping. In this
situation, we see 'clearing Tx Timestamp hang' noise in the log.
Fix this by checking that the NIC is configured for HW TX timestamping
before accepting a HW TX timestamping request.
Similar-to:
commit
26bd4e2db06b ("igb: protect TX timestamping from API misuse")
commit
0a6f2f05a2f5 ("igb: Fix a test with HWTSTAMP_TX_ON")
Signed-off-by: Manjunath Patil <manjunath.b.patil@oracle.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ben Dooks (Codethink) [Tue, 22 Oct 2019 15:11:54 +0000 (16:11 +0100)]
pinctrl: amd: fix __iomem annotation in amd_gpio_irq_handler()
[ Upstream commit
10ff58aa3c2e2a093b6ad615a7e3d8bb0dc613e5 ]
The regs pointer in amd_gpio_irq_handler() should have __iomem
on it, so add that to fix the following sparse warnings:
drivers/pinctrl/pinctrl-amd.c:555:14: warning: incorrect type in assignment (different address spaces)
drivers/pinctrl/pinctrl-amd.c:555:14: expected unsigned int [usertype] *regs
drivers/pinctrl/pinctrl-amd.c:555:14: got void [noderef] <asn:2> *base
drivers/pinctrl/pinctrl-amd.c:563:34: warning: incorrect type in argument 1 (different address spaces)
drivers/pinctrl/pinctrl-amd.c:563:34: expected void const volatile [noderef] <asn:2> *addr
drivers/pinctrl/pinctrl-amd.c:563:34: got unsigned int [usertype] *
drivers/pinctrl/pinctrl-amd.c:580:34: warning: incorrect type in argument 1 (different address spaces)
drivers/pinctrl/pinctrl-amd.c:580:34: expected void const volatile [noderef] <asn:2> *addr
drivers/pinctrl/pinctrl-amd.c:580:34: got unsigned int [usertype] *
drivers/pinctrl/pinctrl-amd.c:587:25: warning: incorrect type in argument 2 (different address spaces)
drivers/pinctrl/pinctrl-amd.c:587:25: expected void volatile [noderef] <asn:2> *addr
drivers/pinctrl/pinctrl-amd.c:587:25: got unsigned int [usertype] *
Signed-off-by: Ben Dooks (Codethink) <ben.dooks@codethink.co.uk>
Link: https://lore.kernel.org/r/20191022151154.5986-1-ben.dooks@codethink.co.uk
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Luiz Augusto von Dentz [Sun, 3 Nov 2019 21:58:15 +0000 (23:58 +0200)]
Bluetooth: Fix advertising duplicated flags
[ Upstream commit
6012b9346d8959194c239fd60a62dfec98d43048 ]
Instances may have flags set as part of its data in which case the code
should not attempt to add it again otherwise it can cause duplication:
< HCI Command: LE Set Extended Advertising Data (0x08|0x0037) plen 35
Handle: 0x00
Operation: Complete extended advertising data (0x03)
Fragment preference: Minimize fragmentation (0x01)
Data length: 0x06
Flags: 0x04
BR/EDR Not Supported
Flags: 0x06
LE General Discoverable Mode
BR/EDR Not Supported
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Toke Høiland-Jørgensen [Sat, 2 Nov 2019 11:09:37 +0000 (12:09 +0100)]
libbpf: Fix error handling in bpf_map__reuse_fd()
[ Upstream commit
d1b4574a4b86565325ef2e545eda8dfc9aa07c60 ]
bpf_map__reuse_fd() was calling close() in the error path before returning
an error value based on errno. However, close can change errno, so that can
lead to potentially misleading error messages. Instead, explicitly store
errno in the err variable before each goto.
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/157269297769.394725.12634985106772698611.stgit@toke.dk
Signed-off-by: Sasha Levin <sashal@kernel.org>
Alexandru Ardelean [Wed, 23 Oct 2019 08:26:34 +0000 (11:26 +0300)]
iio: dln2-adc: fix iio_triggered_buffer_postenable() position
[ Upstream commit
a7bddfe2dfce1d8859422124abe1964e0ecd386e ]
The iio_triggered_buffer_postenable() hook should be called first to
attach the poll function. The iio_triggered_buffer_predisable() hook is
called last (as is it should).
This change moves iio_triggered_buffer_postenable() to be called first. It
adds iio_triggered_buffer_predisable() on the error paths of the postenable
hook.
For the predisable hook, some code-paths have been changed to make sure
that the iio_triggered_buffer_predisable() hook gets called in case there
is an error before it.
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Geert Uytterhoeven [Thu, 24 Oct 2019 13:13:08 +0000 (15:13 +0200)]
pinctrl: sh-pfc: sh7734: Fix duplicate TCLK1_B
[ Upstream commit
884caadad128efad8e00c1cdc3177bc8912ee8ec ]
The definitions for bit field [19:18] of the Peripheral Function Select
Register 3 were accidentally copied from bit field [20], leading to
duplicates for the TCLK1_B function, and missing TCLK0, CAN_CLK_B, and
ET0_ETXD4 functions.
Fix this by adding the missing GPIO_FN_CAN_CLK_B and GPIO_FN_ET0_ETXD4
enum values, and correcting the functions.
Reported-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20191024131308.16659-1-geert+renesas@glider.be
Signed-off-by: Sasha Levin <sashal@kernel.org>
Darrick J. Wong [Thu, 31 Oct 2019 03:29:48 +0000 (20:29 -0700)]
loop: fix no-unmap write-zeroes request behavior
[ Upstream commit
efcfec579f6139528c9e6925eca2bc4a36da65c6 ]
Currently, if the loop device receives a WRITE_ZEROES request, it asks
the underlying filesystem to punch out the range. This behavior is
correct if unmapping is allowed. However, a NOUNMAP request means that
the caller doesn't want us to free the storage backing the range, so
punching out the range is incorrect behavior.
To satisfy a NOUNMAP | WRITE_ZEROES request, loop should ask the
underlying filesystem to FALLOC_FL_ZERO_RANGE, which is (according to
the fallocate documentation) required to ensure that the entire range is
backed by real storage, which suffices for our purposes.
Fixes:
19372e2769179dd ("loop: implement REQ_OP_WRITE_ZEROES")
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
John Garry [Wed, 16 Oct 2019 10:19:52 +0000 (18:19 +0800)]
libata: Ensure ata_port probe has completed before detach
[ Upstream commit
130f4caf145c3562108b245a576db30b916199d2 ]
With CONFIG_DEBUG_TEST_DRIVER_REMOVE set, we may find the following WARN:
[ 23.452574] ------------[ cut here ]------------
[ 23.457190] WARNING: CPU: 59 PID: 1 at drivers/ata/libata-core.c:6676 ata_host_detach+0x15c/0x168
[ 23.466047] Modules linked in:
[ 23.469092] CPU: 59 PID: 1 Comm: swapper/0 Not tainted 5.4.0-rc1-00010-g5b83fd27752b-dirty #296
[ 23.477776] Hardware name: Huawei D06 /D06, BIOS Hisilicon D06 UEFI RC0 - V1.16.01 03/15/2019
[ 23.486286] pstate:
a0c00009 (NzCv daif +PAN +UAO)
[ 23.491065] pc : ata_host_detach+0x15c/0x168
[ 23.495322] lr : ata_host_detach+0x88/0x168
[ 23.499491] sp :
ffff800011cabb50
[ 23.502792] x29:
ffff800011cabb50 x28:
0000000000000007
[ 23.508091] x27:
ffff80001137f068 x26:
ffff8000112c0c28
[ 23.513390] x25:
0000000000003848 x24:
ffff0023ea185300
[ 23.518689] x23:
0000000000000001 x22:
00000000000014c0
[ 23.523987] x21:
0000000000013740 x20:
ffff0023bdc20000
[ 23.529286] x19:
0000000000000000 x18:
0000000000000004
[ 23.534584] x17:
0000000000000001 x16:
00000000000000f0
[ 23.539883] x15:
ffff0023eac13790 x14:
ffff0023eb76c408
[ 23.545181] x13:
0000000000000000 x12:
ffff0023eac13790
[ 23.550480] x11:
ffff0023eb76c228 x10:
0000000000000000
[ 23.555779] x9 :
ffff0023eac13798 x8 :
0000000040000000
[ 23.561077] x7 :
0000000000000002 x6 :
0000000000000001
[ 23.566376] x5 :
0000000000000002 x4 :
0000000000000000
[ 23.571674] x3 :
ffff0023bf08a0bc x2 :
0000000000000000
[ 23.576972] x1 :
3099674201f72700 x0 :
0000000000400284
[ 23.582272] Call trace:
[ 23.584706] ata_host_detach+0x15c/0x168
[ 23.588616] ata_pci_remove_one+0x10/0x18
[ 23.592615] ahci_remove_one+0x20/0x40
[ 23.596356] pci_device_remove+0x3c/0xe0
[ 23.600267] really_probe+0xdc/0x3e0
[ 23.603830] driver_probe_device+0x58/0x100
[ 23.608000] device_driver_attach+0x6c/0x90
[ 23.612169] __driver_attach+0x84/0xc8
[ 23.615908] bus_for_each_dev+0x74/0xc8
[ 23.619730] driver_attach+0x20/0x28
[ 23.623292] bus_add_driver+0x148/0x1f0
[ 23.627115] driver_register+0x60/0x110
[ 23.630938] __pci_register_driver+0x40/0x48
[ 23.635199] ahci_pci_driver_init+0x20/0x28
[ 23.639372] do_one_initcall+0x5c/0x1b0
[ 23.643199] kernel_init_freeable+0x1a4/0x24c
[ 23.647546] kernel_init+0x10/0x108
[ 23.651023] ret_from_fork+0x10/0x18
[ 23.654590] ---[ end trace
634a14b675b71c13 ]---
With KASAN also enabled, we may also get many use-after-free reports.
The issue is that when CONFIG_DEBUG_TEST_DRIVER_REMOVE is set, we may
attempt to detach the ata_port before it has been probed.
This is because the ata_ports are async probed, meaning that there is no
guarantee that the ata_port has probed prior to detach. When the ata_port
does probe in this scenario, we get all sorts of issues as the detach may
have already happened.
Fix by ensuring synchronisation with async_synchronize_full(). We could
alternatively use the cookie returned from the ata_port probe
async_schedule() call, but that means managing the cookie, so more
complicated.
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yunsheng Lin [Thu, 31 Oct 2019 11:23:17 +0000 (19:23 +0800)]
net: hns3: add struct netdev_queue debug info for TX timeout
[ Upstream commit
647522a5ef6401dcdb8ec417421e43fb21910167 ]
When there is a TX timeout, we can tell if the driver or stack
has stopped the queue by looking at state field, and when has
the last packet transmited by looking at trans_start field.
So this patch prints these two field in the
hns3_get_tx_timeo_queue_info().
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Gerald Schaefer [Tue, 22 Oct 2019 12:38:08 +0000 (14:38 +0200)]
s390/mm: add mm_pxd_folded() checks to pxd_free()
[ Upstream commit
2416cefc504ba8ae9b17e3e6b40afc72708f96be ]
Unlike pxd_free_tlb(), the pxd_free() functions do not check for folded
page tables. This is not an issue so far, as those functions will actually
never be called, since no code will reach them when page tables are folded.
In order to avoid future issues, and to make the s390 code more similar to
other architectures, add mm_pxd_folded() checks, similar to how it is done
in pxd_free_tlb().
This was found by testing a patch from from Anshuman Khandual, which is
currently discussed on LKML ("mm/debug: Add tests validating architecture
page table helpers").
Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Heiko Carstens [Tue, 29 Oct 2019 13:09:47 +0000 (14:09 +0100)]
s390/time: ensure get_clock_monotonic() returns monotonic values
[ Upstream commit
011620688a71f2f1fe9901dbc2479a7c01053196 ]
The current implementation of get_clock_monotonic() leaves it up to
the caller to call the function with preemption disabled. The only
core kernel caller (sched_clock) however does not disable preemption.
In order to make sure that all callers of this function see monotonic
values handle disabling preemption within the function itself.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Stephan Gerhold [Tue, 8 Oct 2019 11:52:08 +0000 (13:52 +0200)]
phy: qcom-usb-hs: Fix extcon double register after power cycle
[ Upstream commit
64f86b9978449ff05bfa6c64b4c5439e21e9c80b ]
Commit
f0b5c2c96370 ("phy: qcom-usb-hs: Replace the extcon API")
switched from extcon_register_notifier() to the resource-managed
API, i.e. devm_extcon_register_notifier().
This is problematic in this case, because the extcon notifier
is dynamically registered/unregistered whenever the PHY is powered
on/off. The resource-managed API does not unregister the notifier
until the driver is removed, so as soon as the PHY is power cycled,
attempting to register the notifier again results in:
double register detected
WARNING: CPU: 1 PID: 182 at kernel/notifier.c:26 notifier_chain_register+0x74/0xa0
Call trace:
...
extcon_register_notifier+0x74/0xb8
devm_extcon_register_notifier+0x54/0xb8
qcom_usb_hs_phy_power_on+0x1fc/0x208
...
... and USB stops working after plugging the cable out and in
another time.
The easiest way to fix this is to make a partial revert of
commit
f0b5c2c96370 ("phy: qcom-usb-hs: Replace the extcon API")
and avoid using the resource-managed API in this case.
Fixes:
f0b5c2c96370 ("phy: qcom-usb-hs: Replace the extcon API")
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Mao Wenan [Sat, 26 Oct 2019 02:21:39 +0000 (10:21 +0800)]
net: dsa: LAN9303: select REGMAP when LAN9303 enable
[ Upstream commit
b6989d248a2d13f02895bae1a9321b3bbccc0283 ]
When NET_DSA_SMSC_LAN9303=y and NET_DSA_SMSC_LAN9303_MDIO=y,
below errors can be seen:
drivers/net/dsa/lan9303_mdio.c:87:23: error: REGMAP_ENDIAN_LITTLE
undeclared here (not in a function)
.reg_format_endian = REGMAP_ENDIAN_LITTLE,
drivers/net/dsa/lan9303_mdio.c:93:3: error: const struct regmap_config
has no member named reg_read
.reg_read = lan9303_mdio_read,
It should select REGMAP in config NET_DSA_SMSC_LAN9303.
Fixes:
dc7005831523 ("net: dsa: LAN9303: add MDIO managed mode support")
Signed-off-by: Mao Wenan <maowenan@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Thierry Reding [Mon, 28 Oct 2019 12:37:12 +0000 (13:37 +0100)]
gpu: host1x: Allocate gather copy for host1x
[ Upstream commit
b78e70c04c149299bd210759d7c7af7c86b89ca8 ]
Currently when the gather buffers are copied, they are copied to a
buffer that is allocated for the host1x client that wants to execute the
command streams in the buffers. However, the gather buffers will be read
by the host1x device, which causes SMMU faults if the DMA API is backed
by an IOMMU.
Fix this by allocating the gather buffer copy for the host1x device,
which makes sure that it will be mapped into the host1x's IOVA space if
the DMA API is backed by an IOMMU.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Michal Kalderon [Sun, 27 Oct 2019 20:04:51 +0000 (22:04 +0200)]
RDMA/qedr: Fix memory leak in user qp and mr
[ Upstream commit
24e412c1e00ebfe73619e6b88cbc26c2c7d41b85 ]
User QPs pbl's weren't freed properly.
MR pbls weren't freed properly.
Fixes:
e0290cce6ac0 ("qedr: Add support for memory registeration verbs")
Link: https://lore.kernel.org/r/20191027200451.28187-5-michal.kalderon@marvell.com
Signed-off-by: Ariel Elior <ariel.elior@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Hans de Goede [Sat, 26 Oct 2019 20:24:34 +0000 (22:24 +0200)]
ACPI: button: Add DMI quirk for Medion Akoya E2215T
[ Upstream commit
932e1ba486117de2fcea3df27ad8218ad6c11470 ]
The Medion Akoya E2215T's ACPI _LID implementation is quite broken:
1. For notifications it uses an ActiveLow Edge GpioInt, rather then
an ActiveBoth one, meaning that the device is only notified when the
lid is closed, not when it is opened.
2. Matching with this its _LID method simply always returns 0 (closed)
In order for the Linux LID code to work properly with this implementation,
the lid_init_state selection needs to be set to ACPI_BUTTON_LID_INIT_OPEN.
This commit adds a DMI quirk for this.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Lingling Xu [Mon, 28 Oct 2019 10:10:30 +0000 (18:10 +0800)]
spi: sprd: adi: Add missing lock protection when rebooting
[ Upstream commit
91ea1d70607e374b014b4b9bea771ce661f9f64b ]
When rebooting the system, we should lock the watchdog after
configuration to make sure the watchdog can reboot the system
successfully.
Signed-off-by: Lingling Xu <ling_ling.xu@unisoc.com>
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Link: https://lore.kernel.org/r/7b04711127434555e3a1a86bc6be99860cd86668.1572257085.git.baolin.wang@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Thierry Reding [Wed, 24 Jul 2019 15:06:17 +0000 (17:06 +0200)]
drm/tegra: sor: Use correct SOR index on Tegra210
[ Upstream commit
24e64f86da40e68c5f58af08796110f147b12193 ]
The device tree bindings for the Tegra210 SOR don't require the
controller instance to be defined, since the instance can be derived
from the compatible string. The index is never used on Tegra210, so we
got away with it not getting set. However, subsequent patches will
change that, so make sure the proper index is used.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Grygorii Strashko [Wed, 23 Oct 2019 14:48:45 +0000 (17:48 +0300)]
net: phy: dp83867: enable robust auto-mdix
[ Upstream commit
5a7f08c2abb0efc9d17aff2fc75d6d3b85e622e4 ]
The link detection timeouts can be observed (or link might not be detected
at all) when dp83867 PHY is configured in manual mode (speed/duplex).
CFG3[9] Robust Auto-MDIX option allows to significantly improve link detection
in case dp83867 is configured in manual mode and reduce link detection
time.
As per DM: "If link partners are configured to operational modes that are
not supported by normal Auto MDI/MDIX mode (like Auto-Neg versus Force
100Base-TX or Force 100Base-TX versus Force 100Base-TX), this Robust Auto
MDI/MDIX mode allows MDI/MDIX resolution and prevents deadlock."
Hence, enable this option by default as there are no known reasons
not to do so.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Nicholas Nunley [Fri, 20 Sep 2019 09:17:21 +0000 (02:17 -0700)]
i40e: initialize ITRN registers with correct values
[ Upstream commit
998e5166e604fd37afe94352f7b8c2d816b11049 ]
Since commit
92418fb14750 ("i40e/i40evf: Use usec value instead of reg
value for ITR defines") the driver tracks the interrupt throttling
intervals in single usec units, although the actual ITRN/ITR0 registers are
programmed in 2 usec units. Most register programming flows in the driver
correctly handle the conversion, although it is currently not applied when
the registers are initialized to their default values. Most of the time
this doesn't present a problem since the default values are usually
immediately overwritten through the standard adaptive throttling mechanism,
or updated manually by the user, but if adaptive throttling is disabled and
the interval values are left alone then the incorrect value will persist.
Since the intended default interval of 50 usecs (vs. 100 usecs as
programmed) performs better for most traffic workloads, this can lead to
performance regressions.
This patch adds the correct conversion when writing the initial values to
the ITRN registers.
Signed-off-by: Nicholas Nunley <nicholas.d.nunley@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yunfeng Ye [Mon, 21 Oct 2019 11:31:21 +0000 (19:31 +0800)]
arm64: psci: Reduce the waiting time for cpu_psci_cpu_kill()
[ Upstream commit
bfcef4ab1d7ee8921bc322109b1692036cc6cbe0 ]
In cases like suspend-to-disk and suspend-to-ram, a large number of CPU
cores need to be shut down. At present, the CPU hotplug operation is
serialised, and the CPU cores can only be shut down one by one. In this
process, if PSCI affinity_info() does not return LEVEL_OFF quickly,
cpu_psci_cpu_kill() needs to wait for 10ms. If hundreds of CPU cores
need to be shut down, it will take a long time.
Normally, there is no need to wait 10ms in cpu_psci_cpu_kill(). So
change the wait interval from 10 ms to max 1 ms and use usleep_range()
instead of msleep() for more accurate timer.
In addition, reducing the time interval will increase the messages
output, so remove the "Retry ..." message, instead, track time and
output to the the sucessful message.
Signed-off-by: Yunfeng Ye <yeyunfeng@huawei.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Guoqing Jiang [Thu, 26 Sep 2019 11:53:50 +0000 (13:53 +0200)]
md/bitmap: avoid race window between md_bitmap_resize and bitmap_file_clear_bit
[ Upstream commit
fadcbd2901a0f7c8721f3bdb69eac95c272dc8ed ]
We need to move "spin_lock_irq(&bitmap->counts.lock)" before unmap previous
storage, otherwise panic like belows could happen as follows.
[ 902.353802] sdl: detected capacity change from
1077936128 to
3221225472
[ 902.616948] general protection fault: 0000 [#1] SMP
[snip]
[ 902.618588] CPU: 12 PID: 33698 Comm: md0_raid1 Tainted: G O 4.14.144-1-pserver #4.14.144-1.1~deb10
[ 902.618870] Hardware name: Supermicro SBA-7142G-T4/BHQGE, BIOS 3.00 10/24/2012
[ 902.619120] task:
ffff9ae1860fc600 task.stack:
ffffb52e4c704000
[ 902.619301] RIP: 0010:bitmap_file_clear_bit+0x90/0xd0 [md_mod]
[ 902.619464] RSP: 0018:
ffffb52e4c707d28 EFLAGS:
00010087
[ 902.619626] RAX:
ffe8008b0d061000 RBX:
ffff9ad078c87300 RCX:
0000000000000000
[ 902.619792] RDX:
ffff9ad986341868 RSI:
0000000000000803 RDI:
ffff9ad078c87300
[ 902.619986] RBP:
ffff9ad0ed7a8000 R08:
0000000000000000 R09:
0000000000000000
[ 902.620154] R10:
ffffb52e4c707ec0 R11:
ffff9ad987d1ed44 R12:
ffff9ad0ed7a8360
[ 902.620320] R13:
0000000000000003 R14:
0000000000060000 R15:
0000000000000800
[ 902.620487] FS:
0000000000000000(0000) GS:
ffff9ad987d00000(0000) knlGS:
0000000000000000
[ 902.620738] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 902.620901] CR2:
000055ff12aecec0 CR3:
0000001005207000 CR4:
00000000000406e0
[ 902.621068] Call Trace:
[ 902.621256] bitmap_daemon_work+0x2dd/0x360 [md_mod]
[ 902.621429] ? find_pers+0x70/0x70 [md_mod]
[ 902.621597] md_check_recovery+0x51/0x540 [md_mod]
[ 902.621762] raid1d+0x5c/0xeb0 [raid1]
[ 902.621939] ? try_to_del_timer_sync+0x4d/0x80
[ 902.622102] ? del_timer_sync+0x35/0x40
[ 902.622265] ? schedule_timeout+0x177/0x360
[ 902.622453] ? call_timer_fn+0x130/0x130
[ 902.622623] ? find_pers+0x70/0x70 [md_mod]
[ 902.622794] ? md_thread+0x94/0x150 [md_mod]
[ 902.622959] md_thread+0x94/0x150 [md_mod]
[ 902.623121] ? wait_woken+0x80/0x80
[ 902.623280] kthread+0x119/0x130
[ 902.623437] ? kthread_create_on_node+0x60/0x60
[ 902.623600] ret_from_fork+0x22/0x40
[ 902.624225] RIP: bitmap_file_clear_bit+0x90/0xd0 [md_mod] RSP:
ffffb52e4c707d28
Because mdadm was running on another cpu to do resize, so bitmap_resize was
called to replace bitmap as below shows.
PID: 38801 TASK:
ffff9ad074a90e00 CPU: 0 COMMAND: "mdadm"
[exception RIP: queued_spin_lock_slowpath+56]
[snip]
-- <NMI exception stack> --
#5 [
ffffb52e60f17c58] queued_spin_lock_slowpath at
ffffffff9c0b27b8
#6 [
ffffb52e60f17c58] bitmap_resize at
ffffffffc0399877 [md_mod]
#7 [
ffffb52e60f17d30] raid1_resize at
ffffffffc0285bf9 [raid1]
#8 [
ffffb52e60f17d50] update_size at
ffffffffc038a31a [md_mod]
#9 [
ffffb52e60f17d70] md_ioctl at
ffffffffc0395ca4 [md_mod]
And the procedure to keep resize bitmap safe is allocate new storage
space, then quiesce, copy bits, replace bitmap, and re-start.
However the daemon (bitmap_daemon_work) could happen even the array is
quiesced, which means when bitmap_file_clear_bit is triggered by raid1d,
then it thinks it should be fine to access store->filemap since
counts->lock is held, but resize could change the storage without the
protection of the lock.
Cc: Jack Wang <jinpu.wang@cloud.ionos.com>
Cc: NeilBrown <neilb@suse.com>
Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sakari Ailus [Fri, 11 Oct 2019 11:16:02 +0000 (08:16 -0300)]
media: smiapp: Register sensor after enabling runtime PM on the device
[ Upstream commit
90c9e4a4dba9f4de331372e745fb1991c1faa598 ]
Earlier it was possible that the parts of the driver that assumed runtime
PM was enabled were being called before runtime PM was enabled in the
driver's probe function. So enable runtime PM before registering the
sub-device.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Thomas Gleixner [Thu, 17 Oct 2019 10:19:01 +0000 (12:19 +0200)]
x86/ioapic: Prevent inconsistent state when moving an interrupt
[ Upstream commit
df4393424af3fbdcd5c404077176082a8ce459c4 ]
There is an issue with threaded interrupts which are marked ONESHOT
and using the fasteoi handler:
if (IS_ONESHOT())
mask_irq();
....
cond_unmask_eoi_irq()
chip->irq_eoi();
if (setaffinity_pending) {
mask_ioapic();
...
move_affinity();
unmask_ioapic();
}
So if setaffinity is pending the interrupt will be moved and then
unconditionally unmasked at the ioapic level, which is wrong in two
aspects:
1) It should be kept masked up to the point where the threaded handler
finished.
2) The physical chip state and the software masked state are inconsistent
Guard both the mask and the unmask with a check for the software masked
state. If the line is marked masked then the ioapic line is also masked, so
both mask_ioapic() and unmask_ioapic() can be skipped safely.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Siewior <bigeasy@linutronix.de>
Fixes:
3aa551c9b4c4 ("genirq: add threaded interrupt handler support")
Link: https://lkml.kernel.org/r/20191017101938.321393687@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Corey Minyard [Mon, 14 Oct 2019 15:35:56 +0000 (10:35 -0500)]
ipmi: Don't allow device module unload when in use
[ Upstream commit
cbb79863fc3175ed5ac506465948b02a893a8235 ]
If something has the IPMI driver open, don't allow the device
module to be unloaded. Before it would unload and the user would
get errors on use.
This change is made on user request, and it makes it consistent
with the I2C driver, which has the same behavior.
It does change things a little bit with respect to kernel users.
If the ACPI or IPMI watchdog (or any other kernel user) has
created a user, then the device module cannot be unloaded. Before
it could be unloaded,
This does not affect hot-plug. If the device goes away (it's on
something removable that is removed or is hot-removed via sysfs)
then it still behaves as it did before.
Reported-by: tony camuso <tcamuso@redhat.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Tested-by: tony camuso <tcamuso@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Chris Chiu [Wed, 16 Oct 2019 01:54:08 +0000 (09:54 +0800)]
rtl8xxxu: fix RTL8723BU connection failure issue after warm reboot
[ Upstream commit
0eeb91ade90ce06d2fa1e2fcb55e3316b64c203c ]
The RTL8723BU has problems connecting to AP after each warm reboot.
Sometimes it returns no scan result, and in most cases, it fails
the authentication for unknown reason. However, it works totally
fine after cold reboot.
Compare the value of register SYS_CR and SYS_CLK_MAC_CLK_ENABLE
for cold reboot and warm reboot, the registers imply that the MAC
is already powered and thus some procedures are skipped during
driver initialization. Double checked the vendor driver, it reads
the SYS_CR and SYS_CLK_MAC_CLK_ENABLE also but doesn't skip any
during initialization based on them. This commit only tells the
RTL8723BU to do full initialization without checking MAC status.
Signed-off-by: Chris Chiu <chiu@endlessm.com>
Signed-off-by: Jes Sorensen <Jes.Sorensen@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kangjie Lu [Fri, 18 Oct 2019 04:41:50 +0000 (23:41 -0500)]
drm/gma500: fix memory disclosures due to uninitialized bytes
[ Upstream commit
ec3b7b6eb8c90b52f61adff11b6db7a8db34de19 ]
"clock" may be copied to "best_clock". Initializing best_clock
is not sufficient. The fix initializes clock as well to avoid
memory disclosures and informaiton leaks.
Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20191018044150.1899-1-kjlu@umn.edu
Signed-off-by: Sasha Levin <sashal@kernel.org>
Leo Yan [Fri, 18 Oct 2019 08:55:31 +0000 (16:55 +0800)]
perf tests: Disable bp_signal testing for arm64
[ Upstream commit
6a5f3d94cb69a185b921cb92c39888dc31009acb ]
As there are several discussions for enabling perf breakpoint signal
testing on arm64 platform: arm64 needs to rely on single-step to execute
the breakpointed instruction and then reinstall the breakpoint exception
handler. But if we hook the breakpoint with a signal, the signal
handler will do the stepping rather than the breakpointed instruction,
this causes infinite loops as below:
Kernel space | Userspace
---------------------------------|--------------------------------
| __test_function() -> hit
| breakpoint
breakpoint_handler() |
`-> user_enable_single_step() |
do_signal() |
| sig_handler() -> Step one
| instruction and
| trap to kernel
single_step_handler() |
`-> reinstall_suspended_bps() |
| __test_function() -> hit
| breakpoint again and
| repeat up flow infinitely
As Will Deacon mentioned [1]: "that we require the overflow handler to
do the stepping on arm/arm64, which is relied upon by GDB/ptrace. The
hw_breakpoint code is a complete disaster so my preference would be to
rip out the perf part and just implement something directly in ptrace,
but it's a pretty horrible job". Though Will commented this on arm
architecture, but the comment also can apply on arm64 architecture.
For complete information, I searched online and found a few years back,
Wang Nan sent one patch 'arm64: Store breakpoint single step state into
pstate' [2]; the patch tried to resolve this issue by avoiding single
stepping in signal handler and defer to enable the signal stepping when
return to __test_function(). The fixing was not merged due to the
concern for missing to handle different usage cases.
Based on the info, the most feasible way is to skip Perf breakpoint
signal testing for arm64 and this could avoid the duplicate
investigation efforts when people see the failure. This patch skips
this case on arm64 platform, which is same with arm architecture.
[1] https://lkml.org/lkml/2018/11/15/205
[2] https://lkml.org/lkml/2015/12/23/477
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Brajeswar Ghosh <brajeswar.linux@gmail.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Souptick Joarder <jrdr.linux@gmail.com>
Cc: Will Deacon <will@kernel.org>
Link: http://lore.kernel.org/lkml/20191018085531.6348-3-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Benjamin Berg [Wed, 9 Oct 2019 15:54:24 +0000 (17:54 +0200)]
x86/mce: Lower throttling MCE messages' priority to warning
[ Upstream commit
9c3bafaa1fd88e4dd2dba3735a1f1abb0f2c7bb7 ]
On modern CPUs it is quite normal that the temperature limits are
reached and the CPU is throttled. In fact, often the thermal design is
not sufficient to cool the CPU at full load and limits can quickly be
reached when a burst in load happens. This will even happen with
technologies like RAPL limitting the long term power consumption of
the package.
Also, these limits are "softer", as Srinivas explains:
"CPU temperature doesn't have to hit max(TjMax) to get these warnings.
OEMs ha[ve] an ability to program a threshold where a thermal interrupt
can be generated. In some systems the offset is 20C+ (Read only value).
In recent systems, there is another offset on top of it which can be
programmed by OS, once some agent can adjust power limits dynamically.
By default this is set to low by the firmware, which I guess the
prime motivation of Benjamin to submit the patch."
So these messages do not usually indicate a hardware issue (e.g.
insufficient cooling). Log them as warnings to avoid confusion about
their severity.
[ bp: Massage commit mesage. ]
Signed-off-by: Benjamin Berg <bberg@redhat.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Christian Kellner <ckellner@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: x86-ml <x86@kernel.org>
Link: https://lkml.kernel.org/r/20191009155424.249277-1-bberg@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Song Liu [Mon, 14 Oct 2019 17:12:23 +0000 (10:12 -0700)]
bpf/stackmap: Fix deadlock with rq_lock in bpf_get_stack()
[ Upstream commit
eac9153f2b584c702cea02c1f1a57d85aa9aea42 ]
bpf stackmap with build-id lookup (BPF_F_STACK_BUILD_ID) can trigger A-A
deadlock on rq_lock():
rcu: INFO: rcu_sched detected stalls on CPUs/tasks:
[...]
Call Trace:
try_to_wake_up+0x1ad/0x590
wake_up_q+0x54/0x80
rwsem_wake+0x8a/0xb0
bpf_get_stack+0x13c/0x150
bpf_prog_fbdaf42eded9fe46_on_event+0x5e3/0x1000
bpf_overflow_handler+0x60/0x100
__perf_event_overflow+0x4f/0xf0
perf_swevent_overflow+0x99/0xc0
___perf_sw_event+0xe7/0x120
__schedule+0x47d/0x620
schedule+0x29/0x90
futex_wait_queue_me+0xb9/0x110
futex_wait+0x139/0x230
do_futex+0x2ac/0xa50
__x64_sys_futex+0x13c/0x180
do_syscall_64+0x42/0x100
entry_SYSCALL_64_after_hwframe+0x44/0xa9
This can be reproduced by:
1. Start a multi-thread program that does parallel mmap() and malloc();
2. taskset the program to 2 CPUs;
3. Attach bpf program to trace_sched_switch and gather stackmap with
build-id, e.g. with trace.py from bcc tools:
trace.py -U -p <pid> -s <some-bin,some-lib> t:sched:sched_switch
A sample reproducer is attached at the end.
This could also trigger deadlock with other locks that are nested with
rq_lock.
Fix this by checking whether irqs are disabled. Since rq_lock and all
other nested locks are irq safe, it is safe to do up_read() when irqs are
not disable. If the irqs are disabled, postpone up_read() in irq_work.
Fixes:
615755a77b24 ("bpf: extend stackmap to save binary_build_id+offset instead of address")
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20191014171223.357174-1-songliubraving@fb.com
Reproducer:
============================ 8< ============================
char *filename;
void *worker(void *p)
{
void *ptr;
int fd;
char *pptr;
fd = open(filename, O_RDONLY);
if (fd < 0)
return NULL;
while (1) {
struct timespec ts = {0, 1000 + rand() % 2000};
ptr = mmap(NULL, 4096 * 64, PROT_READ, MAP_PRIVATE, fd, 0);
usleep(1);
if (ptr == MAP_FAILED) {
printf("failed to mmap\n");
break;
}
munmap(ptr, 4096 * 64);
usleep(1);
pptr = malloc(1);
usleep(1);
pptr[0] = 1;
usleep(1);
free(pptr);
usleep(1);
nanosleep(&ts, NULL);
}
close(fd);
return NULL;
}
int main(int argc, char *argv[])
{
void *ptr;
int i;
pthread_t threads[THREAD_COUNT];
if (argc < 2)
return 0;
filename = argv[1];
for (i = 0; i < THREAD_COUNT; i++) {
if (pthread_create(threads + i, NULL, worker, NULL)) {
fprintf(stderr, "Error creating thread\n");
return 0;
}
}
for (i = 0; i < THREAD_COUNT; i++)
pthread_join(threads[i], NULL);
return 0;
}
============================ 8< ============================
Signed-off-by: Sasha Levin <sashal@kernel.org>
Mattijs Korpershoek [Thu, 17 Oct 2019 03:20:39 +0000 (20:20 -0700)]
Bluetooth: hci_core: fix init for HCI_USER_CHANNEL
[ Upstream commit
eb8c101e28496888a0dcfe16ab86a1bee369e820 ]
During the setup() stage, HCI device drivers expect the chip to
acknowledge its setup() completion via vendor specific frames.
If userspace opens() such HCI device in HCI_USER_CHANNEL [1] mode,
the vendor specific frames are never tranmitted to the driver, as
they are filtered in hci_rx_work().
Allow HCI devices which operate in HCI_USER_CHANNEL mode to receive
frames if the HCI device is is HCI_INIT state.
[1] https://www.spinics.net/lists/linux-bluetooth/msg37345.html
Fixes:
23500189d7e0 ("Bluetooth: Introduce new HCI socket channel for user operation")
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Szymon Janc [Wed, 2 Oct 2019 12:22:43 +0000 (14:22 +0200)]
Bluetooth: Workaround directed advertising bug in Broadcom controllers
[ Upstream commit
4c371bb95cf06ded80df0e6139fdd77cee1d9a94 ]
It appears that some Broadcom controllers (eg BCM20702A0) reject LE Set
Advertising Parameters command if advertising intervals provided are not
within range for undirected and low duty directed advertising.
Workaround this bug by populating min and max intervals with 'valid'
values.
< HCI Command: LE Set Advertising Parameters (0x08|0x0006) plen 15
Min advertising interval: 0.000 msec (0x0000)
Max advertising interval: 0.000 msec (0x0000)
Type: Connectable directed - ADV_DIRECT_IND (high duty cycle) (0x01)
Own address type: Public (0x00)
Direct address type: Random (0x01)
Direct address: E2:F0:7B:9F:DC:F4 (Static)
Channel map: 37, 38, 39 (0x07)
Filter policy: Allow Scan Request from Any, Allow Connect Request from Any (0x00)
> HCI Event: Command Complete (0x0e) plen 4
LE Set Advertising Parameters (0x08|0x0006) ncmd 1
Status: Invalid HCI Command Parameters (0x12)
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
Tested-by: Sören Beye <linux@hypfer.de>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ben Dooks (Codethink) [Wed, 16 Oct 2019 11:39:43 +0000 (12:39 +0100)]
Bluetooth: missed cpu_to_le16 conversion in hci_init4_req
[ Upstream commit
727ea61a5028f8ac96f75ab34cb1b56e63fd9227 ]
It looks like in hci_init4_req() the request is being
initialised from cpu-endian data but the packet is specified
to be little-endian. This causes an warning from sparse due
to __le16 to u16 conversion.
Fix this by using cpu_to_le16() on the two fields in the packet.
net/bluetooth/hci_core.c:845:27: warning: incorrect type in assignment (different base types)
net/bluetooth/hci_core.c:845:27: expected restricted __le16 [usertype] tx_len
net/bluetooth/hci_core.c:845:27: got unsigned short [usertype] le_max_tx_len
net/bluetooth/hci_core.c:846:28: warning: incorrect type in assignment (different base types)
net/bluetooth/hci_core.c:846:28: expected restricted __le16 [usertype] tx_time
net/bluetooth/hci_core.c:846:28: got unsigned short [usertype] le_max_tx_time
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Miquel Raynal [Fri, 11 Oct 2019 14:43:42 +0000 (16:43 +0200)]
iio: adc: max1027: Reset the device at probe time
[ Upstream commit
db033831b4f5589f9fcbadb837614a7c4eac0308 ]
All the registers are configured by the driver, let's reset the chip
at probe time, avoiding any conflict with a possible earlier
configuration.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ingo Rohloff [Fri, 11 Oct 2019 11:55:18 +0000 (13:55 +0200)]
usb: usbfs: Suppress problematic bind and unbind uevents.
[ Upstream commit
abb0b3d96a1f9407dd66831ae33985a386d4200d ]
commit
1455cf8dbfd0 ("driver core: emit uevents when device is bound
to a driver") added bind and unbind uevents when a driver is bound or
unbound to a physical device.
For USB devices which are handled via the generic usbfs layer (via
libusb for example), this is problematic:
Each time a user space program calls
ioctl(usb_fd, USBDEVFS_CLAIMINTERFACE, &usb_intf_nr);
and then later
ioctl(usb_fd, USBDEVFS_RELEASEINTERFACE, &usb_intf_nr);
The kernel will now produce a bind or unbind event, which does not
really contain any useful information.
This allows a user space program to run a DoS attack against programs
which listen to uevents (in particular systemd/eudev/upowerd):
A malicious user space program just has to call in a tight loop
ioctl(usb_fd, USBDEVFS_CLAIMINTERFACE, &usb_intf_nr);
ioctl(usb_fd, USBDEVFS_RELEASEINTERFACE, &usb_intf_nr);
With this loop the malicious user space program floods the kernel and
all programs listening to uevents with tons of bind and unbind
events.
This patch suppresses uevents for ioctls USBDEVFS_CLAIMINTERFACE and
USBDEVFS_RELEASEINTERFACE.
Signed-off-by: Ingo Rohloff <ingo.rohloff@lauterbach.com>
Link: https://lore.kernel.org/r/20191011115518.2801-1-ingo.rohloff@lauterbach.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jin Yao [Fri, 11 Oct 2019 02:21:22 +0000 (10:21 +0800)]
perf report: Add warning when libunwind not compiled in
[ Upstream commit
800d3f561659b5436f8c57e7c26dd1f6928b5615 ]
We received a user report that call-graph DWARF mode was enabled in
'perf record' but 'perf report' didn't unwind the callstack correctly.
The reason was, libunwind was not compiled in.
We can use 'perf -vv' to check the compiled libraries but it would be
valuable to report a warning to user directly (especially valuable for
a perf newbie).
The warning is:
Warning:
Please install libunwind development packages during the perf build.
Both TUI and stdio are supported.
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20191011022122.26369-1-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Leo Yan [Fri, 11 Oct 2019 09:19:41 +0000 (17:19 +0800)]
perf test: Report failure for mmap events
[ Upstream commit
6add129c5d9210ada25217abc130df0b7096ee02 ]
When fail to mmap events in task exit case, it misses to set 'err' to
-1; thus the testing will not report failure for it.
This patch sets 'err' to -1 when fails to mmap events, thus Perf tool
can report correct result.
Fixes:
d723a55096b8 ("perf test: Add test case for checking number of EXIT events")
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/20191011091942.29841-1-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Daniel Kurtz [Tue, 8 Oct 2019 10:21:45 +0000 (18:21 +0800)]
drm/bridge: dw-hdmi: Restore audio when setting a mode
[ Upstream commit
fadfee3f9d8f114435a8a3e9f83a227600d89de7 ]
When setting a new display mode, dw_hdmi_setup() calls
dw_hdmi_enable_video_path(), which disables all hdmi clocks, including
the audio clock.
We should only (re-)enable the audio clock if audio was already enabled
when setting the new mode.
Without this patch, on RK3288, there will be HDMI audio on some monitors
if i2s was played to headphone when the monitor was plugged.
ACER H277HU and ASUS PB278 are two of the monitors showing this issue.
Signed-off-by: Cheng-Yi Chiang <cychiang@chromium.org>
Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
Signed-off-by: Yakir Yang <ykk@rock-chips.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191008102145.55134-1-cychiang@chromium.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Bjorn Andersson [Fri, 11 Oct 2019 18:28:17 +0000 (11:28 -0700)]
ath10k: Correct error handling of dma_map_single()
[ Upstream commit
d43810b2c1808ac865aa1a2a2c291644bf95345c ]
The return value of dma_map_single() should be checked for errors using
dma_mapping_error() and the skb has been dequeued so it needs to be
freed.
This was found when enabling CONFIG_DMA_API_DEBUG and it warned about the
missing dma_mapping_error() call.
Fixes:
1807da49733e ("ath10k: wmi: add management tx by reference support over wmi")
Reported-by: Niklas Cassel <niklas.cassel@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sami Tolvanen [Fri, 13 Sep 2019 21:14:02 +0000 (14:14 -0700)]
x86/mm: Use the correct function type for native_set_fixmap()
[ Upstream commit
f53e2cd0b8ab7d9e390414470bdbd830f660133f ]
We call native_set_fixmap indirectly through the function pointer
struct pv_mmu_ops::set_fixmap, which expects the first parameter to be
'unsigned' instead of 'enum fixed_addresses'. This patch changes the
function type for native_set_fixmap to match the pointer, which fixes
indirect call mismatches with Control-Flow Integrity (CFI) checking.
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: H . Peter Anvin <hpa@zytor.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20190913211402.193018-1-samitolvanen@google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Stephan Gerhold [Thu, 10 Oct 2019 15:47:20 +0000 (17:47 +0200)]
extcon: sm5502: Reset registers during initialization
[ Upstream commit
6942635032cfd3e003e980d2dfa4e6323a3ce145 ]
On some devices (e.g. Samsung Galaxy A5 (2015)), the bootloader
seems to keep interrupts enabled for SM5502 when booting Linux.
Changing the cable state (i.e. plugging in a cable) - until the driver
is loaded - will therefore produce an interrupt that is never read.
In this situation, the cable state will be stuck forever on the
initial state because SM5502 stops sending interrupts.
This can be avoided by clearing those pending interrupts after
the driver has been loaded.
One way to do this is to reset all registers to default state
by writing to SM5502_REG_RESET. This ensures that we start from
a clean state, with all interrupts disabled.
Suggested-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
David Galiffi [Sat, 21 Sep 2019 00:20:23 +0000 (20:20 -0400)]
drm/amd/display: Fix dongle_caps containing stale information.
[ Upstream commit
dd998291dbe92106d8c4a7581c409b356928d711 ]
[WHY]
During detection:
function: get_active_converter_info populates link->dpcd_caps.dongle_caps
only when dpcd_rev >= DPCD_REV_11 and DWN_STRM_PORTX_TYPE is
DOWN_STREAM_DETAILED_HDMI or DOWN_STREAM_DETAILED_DP_PLUS_PLUS.
Otherwise, it is not cleared, and stale information remains.
During mode validation:
function: dp_active_dongle_validate_timing reads
link->dpcd_caps.dongle_caps->dongle_type to determine the maximum
pixel clock to support. This information is now stale and no longer
valid.
[HOW]
dp_active_dongle_validate_timing should be using
link->dpcd_caps->dongle_type instead.
Signed-off-by: David Galiffi <david.galiffi@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sami Tolvanen [Tue, 8 Oct 2019 22:40:45 +0000 (15:40 -0700)]
syscalls/x86: Use the correct function type in SYSCALL_DEFINE0
[ Upstream commit
8661d769ab77c675b5eb6c3351a372b9fbc1bf40 ]
Although a syscall defined using SYSCALL_DEFINE0 doesn't accept
parameters, use the correct function type to avoid type mismatches
with Control-Flow Integrity (CFI) checking.
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Acked-by: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: H . Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20191008224049.115427-2-samitolvanen@google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Benoit Parrot [Mon, 7 Oct 2019 15:09:59 +0000 (12:09 -0300)]
media: ti-vpe: vpe: fix a v4l2-compliance failure about invalid sizeimage
[ Upstream commit
0bac73adea4df8d34048b38f6ff24dc3e73e90b6 ]
v4l2-compliance fails with this message:
fail: v4l2-test-formats.cpp(463): !pfmt.sizeimage
fail: v4l2-test-formats.cpp(736): \
Video Capture Multiplanar is valid, \
but TRY_FMT failed to return a format
test VIDIOC_TRY_FMT: FAIL
This failure is causd by the driver failing to handle out range
'bytesperline' values from user space applications.
VPDMA hardware is limited to 64k line stride (16 bytes aligned, so 65520
bytes). So make sure the provided or calculated 'bytesperline' is
smaller than the maximum value.
Signed-off-by: Benoit Parrot <bparrot@ti.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Benoit Parrot [Mon, 7 Oct 2019 15:10:01 +0000 (12:10 -0300)]
media: ti-vpe: vpe: ensure buffers are cleaned up properly in abort cases
[ Upstream commit
cf6acb73b050e98b5cc435fae0e8ae0157520410 ]
v4l2-compliance fails with this message:
fail: v4l2-test-buffers.cpp(691): ret == 0
fail: v4l2-test-buffers.cpp(974): captureBufs(node, q, m2m_q,
frame_count, true)
test MMAP: FAIL
This caused the following Kernel Warning:
WARNING: CPU: 0 PID: 961 at
drivers/media/v4l2-core/videobuf2-core.c:1658
__vb2_queue_cancel+0x174/0x1d8
...
CPU: 0 PID: 961 Comm: v4l2-compliance Not tainted
4.14.62-01720-g20ecd717e87a #6
Hardware name: Generic DRA72X (Flattened Device Tree)
Backtrace:
[<
c020b5bc>] (dump_backtrace) from [<
c020b8a0>] (show_stack+0x18/0x1c)
r7:
00000009 r6:
60070013 r5:
00000000 r4:
c1053824
[<
c020b888>] (show_stack) from [<
c09232e8>] (dump_stack+0x90/0xa4)
[<
c0923258>] (dump_stack) from [<
c022b740>] (__warn+0xec/0x104)
r7:
00000009 r6:
c0c0ad50 r5:
00000000 r4:
00000000
[<
c022b654>] (__warn) from [<
c022b810>] (warn_slowpath_null+0x28/0x30)
r9:
00000008 r8:
00000000 r7:
eced4808 r6:
edbc9bac r5:
eced4844
r4:
eced4808
[<
c022b7e8>] (warn_slowpath_null) from [<
c0726f48>]
(__vb2_queue_cancel+0x174/0x1d8)
[<
c0726dd4>] (__vb2_queue_cancel) from [<
c0727648>]
(vb2_core_queue_release+0x20/0x40)
r10:
ecc7bd70 r9:
00000008 r8:
00000000 r7:
edb73010 r6:
edbc9bac
r5:
eced4844
r4:
eced4808 r3:
00000004
[<
c0727628>] (vb2_core_queue_release) from [<
c0729528>]
(vb2_queue_release+0x10/0x14)
r5:
edbc9810 r4:
eced4800
[<
c0729518>] (vb2_queue_release) from [<
c0724d08>]
(v4l2_m2m_ctx_release+0x1c/0x30)
[<
c0724cec>] (v4l2_m2m_ctx_release) from [<
bf0e8f28>]
(vpe_release+0x74/0xb0 [ti_vpe])
r5:
edbc9810 r4:
ed67a400
[<
bf0e8eb4>] (vpe_release [ti_vpe]) from [<
c070fccc>]
(v4l2_release+0x3c/0x80)
r7:
edb73010 r6:
ed176aa0 r5:
edbc9868 r4:
ed5119c0
[<
c070fc90>] (v4l2_release) from [<
c033cf1c>] (__fput+0x8c/0x1dc)
r5:
ecc7bd70 r4:
ed5119c0
[<
c033ce90>] (__fput) from [<
c033d0cc>] (____fput+0x10/0x14)
r10:
00000000 r9:
ed5119c0 r8:
ece392d0 r7:
c1059544 r6:
ece38d80
r5:
ece392b4
r4:
00000000
[<
c033d0bc>] (____fput) from [<
c0246e00>] (task_work_run+0x98/0xb8)
[<
c0246d68>] (task_work_run) from [<
c022f1d8>] (do_exit+0x170/0xa80)
r9:
ece351fc r8:
00000000 r7:
ecde3f58 r6:
ffffe000 r5:
ece351c0
r4:
ece38d80
[<
c022f068>] (do_exit) from [<
c022fb6c>] (do_group_exit+0x48/0xc4)
r7:
000000f8
[<
c022fb24>] (do_group_exit) from [<
c022fc00>]
(__wake_up_parent+0x0/0x28)
r7:
000000f8 r6:
b6c6a798 r5:
00000001 r4:
00000001
[<
c022fbe8>] (SyS_exit_group) from [<
c0207c80>]
(ret_fast_syscall+0x0/0x4c)
These warnings are caused by buffers which not properly cleaned
up/release during an abort use case.
In the abort cases the VPDMA desc buffers would still be mapped and the
in-flight VB2 buffers would not be released properly causing a kernel
warning from being generated by the videobuf2-core level.
Signed-off-by: Benoit Parrot <bparrot@ti.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Benoit Parrot [Mon, 7 Oct 2019 15:09:56 +0000 (12:09 -0300)]
media: ti-vpe: vpe: fix a v4l2-compliance failure causing a kernel panic
[ Upstream commit
a37980ac5be29b83da67bf7d571c6bd9f90f8e45 ]
v4l2-compliance fails with this message:
warn: v4l2-test-formats.cpp(717): \
TRY_FMT cannot handle an invalid pixelformat.
test VIDIOC_TRY_FMT: FAIL
This causes the following kernel panic:
Unable to handle kernel paging request at virtual address
56595561
pgd =
ecd80e00
*pgd=
00000000
Internal error: Oops: 205 [#1] PREEMPT SMP ARM
...
CPU: 0 PID: 930 Comm: v4l2-compliance Not tainted \
4.14.62-01715-gc8cd67f49a19 #1
Hardware name: Generic DRA72X (Flattened Device Tree)
task:
ece44d80 task.stack:
ecc6e000
PC is at __vpe_try_fmt+0x18c/0x2a8 [ti_vpe]
LR is at 0x8
Because the driver fails to properly check the 'num_planes' values for
proper ranges it ends up accessing out of bound data causing the kernel
panic.
Since this driver only handle single or dual plane pixel format, make
sure the provided value does not exceed 2 planes.
Signed-off-by: Benoit Parrot <bparrot@ti.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Benoit Parrot [Mon, 7 Oct 2019 15:09:58 +0000 (12:09 -0300)]
media: ti-vpe: vpe: Make sure YUYV is set as default format
[ Upstream commit
e20b248051ca0f90d84b4d9378e4780bc31f16c6 ]
v4l2-compliance fails with this message:
fail: v4l2-test-formats.cpp(672): \
Video Capture Multiplanar: TRY_FMT(G_FMT) != G_FMT
fail: v4l2-test-formats.cpp(672): \
Video Output Multiplanar: TRY_FMT(G_FMT) != G_FMT
...
test VIDIOC_TRY_FMT: FAIL
The default pixel format was setup as pointing to a specific offset in
the vpe_formats table assuming it was pointing to the V4L2_PIX_FMT_YUYV
entry. This became false after the addition on the NV21 format (see
above commid-id)
So instead of hard-coding an offset which might change over time we need
to use a lookup helper instead so we know the default will always be what
we intended.
Signed-off-by: Benoit Parrot <bparrot@ti.com>
Fixes:
40cc823f7005 ("media: ti-vpe: Add support for NV21 format")
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Benoit Parrot [Mon, 7 Oct 2019 15:10:00 +0000 (12:10 -0300)]
media: ti-vpe: vpe: fix a v4l2-compliance failure about frame sequence number
[ Upstream commit
2444846c0dbfa4ead21b621e4300ec32c90fbf38 ]
v4l2-compliance fails with this message:
fail: v4l2-test-buffers.cpp(294): \
(int)g_sequence() < seq.last_seq + 1
fail: v4l2-test-buffers.cpp(740): \
buf.check(m2m_q, last_m2m_seq)
fail: v4l2-test-buffers.cpp(974): \
captureBufs(node, q, m2m_q, frame_count, true)
test MMAP: FAIL
The driver is failing to update the source frame sequence number in the
vb2 buffer object. Only the destination frame sequence was being
updated.
This is only a reporting issue if the user space app actually cares
about the frame sequence number. But it is fixed nonetheless.
Signed-off-by: Benoit Parrot <bparrot@ti.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Benoit Parrot [Mon, 7 Oct 2019 15:09:57 +0000 (12:09 -0300)]
media: ti-vpe: vpe: fix a v4l2-compliance warning about invalid pixel format
[ Upstream commit
06bec72b250b2cb3ba96fa45c2b8e0fb83745517 ]
v4l2-compliance warns with this message:
warn: v4l2-test-formats.cpp(717): \
TRY_FMT cannot handle an invalid pixelformat.
warn: v4l2-test-formats.cpp(718): \
This may or may not be a problem. For more information see:
warn: v4l2-test-formats.cpp(719): \
http://www.mail-archive.com/linux-media@vger.kernel.org/msg56550.html
...
test VIDIOC_TRY_FMT: FAIL
We need to make sure that the returns a valid pixel format in all
instance. Based on the v4l2 framework convention drivers must return a
valid pixel format when the requested pixel format is either invalid or
not supported.
Signed-off-by: Benoit Parrot <bparrot@ti.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Benoit Parrot [Mon, 7 Oct 2019 15:09:50 +0000 (12:09 -0300)]
media: ti-vpe: vpe: Fix Motion Vector vpdma stride
[ Upstream commit
102af9b9922f658f705a4b0deaccabac409131bf ]
commit
3dc2046ca78b ("[media] media: ti-vpe: vpe: allow use of user
specified stride") and commit
da4414eaed15 ("[media] media: ti-vpe: vpdma:
add support for user specified stride") resulted in the Motion Vector
stride to be the same as the image stride.
This caused memory corruption in the output image as mentioned in
commit
00db969964c8 ("[media] media: ti-vpe: vpe: Fix line stride
for output motion vector").
Fixes:
3dc2046ca78b ("[media] media: ti-vpe: vpe: allow use of user specified stride")
Fixes:
da4414eaed15 ("[media] media: ti-vpe: vpdma: add support for user specified stride")
Signed-off-by: Benoit Parrot <bparrot@ti.com>
Acked-by: Nikhil Devshatwar <nikhil.nd@ti.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Christophe JAILLET [Sun, 22 Sep 2019 07:41:23 +0000 (04:41 -0300)]
media: cx88: Fix some error handling path in 'cx8800_initdev()'
[ Upstream commit
e1444e9b0424c70def6352580762d660af50e03f ]
A call to 'pci_disable_device()' is missing in the error handling path.
In some cases, a call to 'free_irq()' may also be missing.
Reorder the error handling path, add some new labels and fix the 2 issues
mentionned above.
This way, the error handling path in more in line with 'cx8800_finidev()'
(i.e. the remove function)
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Rodrigo Siqueira [Wed, 2 Oct 2019 14:05:16 +0000 (11:05 -0300)]
drm/drm_vblank: Change EINVAL by the correct errno
[ Upstream commit
aed6105b28b10613f16c0bfe97525fe5a23338df ]
For historical reasons, the function drm_wait_vblank_ioctl always return
-EINVAL if something gets wrong. This scenario limits the flexibility
for the userspace to make detailed verification of any problem and take
some action. In particular, the validation of “if (!dev->irq_enabled)”
in the drm_wait_vblank_ioctl is responsible for checking if the driver
support vblank or not. If the driver does not support VBlank, the
function drm_wait_vblank_ioctl returns EINVAL, which does not represent
the real issue; this patch changes this behavior by return EOPNOTSUPP.
Additionally, drm_crtc_get_sequence_ioctl and
drm_crtc_queue_sequence_ioctl, also returns EINVAL if vblank is not
supported; this patch also changes the return value to EOPNOTSUPP in
these functions. Lastly, these functions are invoked by libdrm, which is
used by many compositors; because of this, it is important to check if
this change breaks any compositor. In this sense, the following projects
were examined:
* Drm-hwcomposer
* Kwin
* Sway
* Wlroots
* Wayland
* Weston
* Mutter
* Xorg (67 different drivers)
For each repository the verification happened in three steps:
* Update the main branch
* Look for any occurrence of "drmCrtcQueueSequence",
"drmCrtcGetSequence", and "drmWaitVBlank" with the command git grep -n
"STRING".
* Look in the git history of the project with the command
git log -S<STRING>
None of the above projects validate the use of EINVAL when using
drmWaitVBlank(), which make safe, at least for these projects, to change
the return values. On the other hand, mesa and xserver project uses
drmCrtcQueueSequence() and drmCrtcGetSequence(); this change is harmless
for both projects.
Change since V5 (Pekka Paalanen):
- Check if the change also affects Mutter
Change since V4 (Daniel):
- Also return EOPNOTSUPP in drm_crtc_[get|queue]_sequence_ioctl
Change since V3:
- Return EINVAL for _DRM_VBLANK_SIGNAL (Daniel)
Change since V2:
Daniel Vetter and Chris Wilson
- Replace ENOTTY by EOPNOTSUPP
- Return EINVAL if the parameters are wrong
Cc: Keith Packard <keithp@keithp.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Pekka Paalanen <pekka.paalanen@collabora.com>
Signed-off-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Reviewed-by: Daniel Vetter <daniel@ffwll.ch>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191002140516.adeyj3htylimmlmg@smtp.gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Navid Emamdoost [Fri, 4 Oct 2019 20:16:48 +0000 (15:16 -0500)]
mwifiex: pcie: Fix memory leak in mwifiex_pcie_init_evt_ring
[ Upstream commit
d10dcb615c8e29d403a24d35f8310a7a53e3050c ]
In mwifiex_pcie_init_evt_ring, a new skb is allocated which should be
released if mwifiex_map_pci_memory() fails. The release for skb and
card->evtbd_ring_vbase is added.
Fixes:
0732484b47b5 ("mwifiex: separate ring initialization and ring creation routines")
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Acked-by: Ganapathi Bhat <gbhat@marvell.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Bart Van Assche [Mon, 30 Sep 2019 23:00:41 +0000 (16:00 -0700)]
block: Fix writeback throttling W=1 compiler warnings
[ Upstream commit
1d200e9d6f635ae894993a7d0f1b9e0b6e522e3b ]
Fix the following compiler warnings:
In file included from ./include/linux/bitmap.h:9,
from ./include/linux/cpumask.h:12,
from ./arch/x86/include/asm/cpumask.h:5,
from ./arch/x86/include/asm/msr.h:11,
from ./arch/x86/include/asm/processor.h:21,
from ./arch/x86/include/asm/cpufeature.h:5,
from ./arch/x86/include/asm/thread_info.h:53,
from ./include/linux/thread_info.h:38,
from ./arch/x86/include/asm/preempt.h:7,
from ./include/linux/preempt.h:78,
from ./include/linux/spinlock.h:51,
from ./include/linux/mmzone.h:8,
from ./include/linux/gfp.h:6,
from ./include/linux/mm.h:10,
from ./include/linux/bvec.h:13,
from ./include/linux/blk_types.h:10,
from block/blk-wbt.c:23:
In function 'strncpy',
inlined from 'perf_trace_wbt_stat' at ./include/trace/events/wbt.h:15:1:
./include/linux/string.h:260:9: warning: '__builtin_strncpy' specified bound 32 equals destination size [-Wstringop-truncation]
return __builtin_strncpy(p, q, size);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In function 'strncpy',
inlined from 'perf_trace_wbt_lat' at ./include/trace/events/wbt.h:58:1:
./include/linux/string.h:260:9: warning: '__builtin_strncpy' specified bound 32 equals destination size [-Wstringop-truncation]
return __builtin_strncpy(p, q, size);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In function 'strncpy',
inlined from 'perf_trace_wbt_step' at ./include/trace/events/wbt.h:87:1:
./include/linux/string.h:260:9: warning: '__builtin_strncpy' specified bound 32 equals destination size [-Wstringop-truncation]
return __builtin_strncpy(p, q, size);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In function 'strncpy',
inlined from 'perf_trace_wbt_timer' at ./include/trace/events/wbt.h:126:1:
./include/linux/string.h:260:9: warning: '__builtin_strncpy' specified bound 32 equals destination size [-Wstringop-truncation]
return __builtin_strncpy(p, q, size);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In function 'strncpy',
inlined from 'trace_event_raw_event_wbt_stat' at ./include/trace/events/wbt.h:15:1:
./include/linux/string.h:260:9: warning: '__builtin_strncpy' specified bound 32 equals destination size [-Wstringop-truncation]
return __builtin_strncpy(p, q, size);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In function 'strncpy',
inlined from 'trace_event_raw_event_wbt_lat' at ./include/trace/events/wbt.h:58:1:
./include/linux/string.h:260:9: warning: '__builtin_strncpy' specified bound 32 equals destination size [-Wstringop-truncation]
return __builtin_strncpy(p, q, size);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In function 'strncpy',
inlined from 'trace_event_raw_event_wbt_timer' at ./include/trace/events/wbt.h:126:1:
./include/linux/string.h:260:9: warning: '__builtin_strncpy' specified bound 32 equals destination size [-Wstringop-truncation]
return __builtin_strncpy(p, q, size);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In function 'strncpy',
inlined from 'trace_event_raw_event_wbt_step' at ./include/trace/events/wbt.h:87:1:
./include/linux/string.h:260:9: warning: '__builtin_strncpy' specified bound 32 equals destination size [-Wstringop-truncation]
return __builtin_strncpy(p, q, size);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Fixes:
e34cbd307477 ("blk-wbt: add general throttling mechanism"; v4.10).
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Daniel T. Lee [Sat, 5 Oct 2019 08:25:07 +0000 (17:25 +0900)]
samples: pktgen: fix proc_cmd command result check logic
[ Upstream commit
3cad8f911575191fb3b81d8ed0e061e30f922223 ]
Currently, proc_cmd is used to dispatch command to 'pg_ctrl', 'pg_thread',
'pg_set'. proc_cmd is designed to check command result with grep the
"Result:", but this might fail since this string is only shown in
'pg_thread' and 'pg_set'.
This commit fixes this logic by grep-ing the "Result:" string only when
the command is not for 'pg_ctrl'.
For clarity of an execution flow, 'errexit' flag has been set.
To cleanup pktgen on exit, trap has been added for EXIT signal.
Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Matthias Kaehlcke [Wed, 2 Oct 2019 19:44:06 +0000 (12:44 -0700)]
drm/bridge: dw-hdmi: Refuse DDC/CI transfers on the internal I2C controller
[ Upstream commit
bee447e224b2645911c5d06e35dc90d8433fcef6 ]
The DDC/CI protocol involves sending a multi-byte request to the
display via I2C, which is typically followed by a multi-byte
response. The internal I2C controller only allows single byte
reads/writes or reads of 8 sequential bytes, hence DDC/CI is not
supported when the internal I2C controller is used. The I2C
transfers complete without errors, however the data in the response
is garbage. Abort transfers to/from slave address 0x37 (DDC) with
-EOPNOTSUPP, to make it evident that the communication is failing.
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Sean Paul <sean@poorly.run>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191002124354.v2.1.I709dfec496f5f0b44a7b61dcd4937924da8d8382@changeid
Signed-off-by: Sasha Levin <sashal@kernel.org>
Hans Verkuil [Tue, 1 Oct 2019 07:56:38 +0000 (04:56 -0300)]
media: cec-funcs.h: add status_req checks
[ Upstream commit
9b211f9c5a0b67afc435b86f75d78273b97db1c5 ]
The CEC_MSG_GIVE_DECK_STATUS and CEC_MSG_GIVE_TUNER_DEVICE_STATUS commands
both have a status_req argument: ON, OFF, ONCE. If ON or ONCE, then the
follower will reply with a STATUS message. Either once or whenever the
status changes (status_req == ON).
If status_req == OFF, then it will stop sending continuous status updates,
but the follower will *not* send a STATUS message in that case.
This means that if status_req == OFF, then msg->reply should be 0 as well
since no reply is expected in that case.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yang Yingliang [Tue, 24 Sep 2019 09:49:04 +0000 (06:49 -0300)]
media: flexcop-usb: fix NULL-ptr deref in flexcop_usb_transfer_init()
[ Upstream commit
649cd16c438f51d4cd777e71ca1f47f6e0c5e65d ]
If usb_set_interface() failed, iface->cur_altsetting will
not be assigned and it will be used in flexcop_usb_transfer_init()
It may lead a NULL pointer dereference.
Check usb_set_interface() return value in flexcop_usb_init()
and return failed to avoid using this NULL pointer.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yizhuo [Thu, 3 Oct 2019 17:58:13 +0000 (10:58 -0700)]
regulator: max8907: Fix the usage of uninitialized variable in max8907_regulator_probe()
[ Upstream commit
472b39c3d1bba0616eb0e9a8fa3ad0f56927c7d7 ]
Inside function max8907_regulator_probe(), variable val could
be uninitialized if regmap_read() fails. However, val is used
later in the if statement to decide the content written to
"pmic", which is potentially unsafe.
Signed-off-by: Yizhuo <yzhai003@ucr.edu>
Link: https://lore.kernel.org/r/20191003175813.16415-1-yzhai003@ucr.edu
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Tony Lindgren [Sat, 14 Sep 2019 21:02:56 +0000 (14:02 -0700)]
hwrng: omap3-rom - Call clk_disable_unprepare() on exit only if not idled
[ Upstream commit
eaecce12f5f0d2c35d278e41e1bc4522393861ab ]
When unloading omap3-rom-rng, we'll get the following:
WARNING: CPU: 0 PID: 100 at drivers/clk/clk.c:948 clk_core_disable
This is because the clock may be already disabled by omap3_rom_rng_idle().
Let's fix the issue by checking for rng_idle on exit.
Cc: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: Adam Ford <aford173@gmail.com>
Cc: Pali Rohár <pali.rohar@gmail.com>
Cc: Sebastian Reichel <sre@kernel.org>
Cc: Tero Kristo <t-kristo@ti.com>
Fixes:
1c6b7c2108bd ("hwrng: OMAP3 ROM Random Number Generator support")
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Veeraiyan Chidambaram [Wed, 11 Sep 2019 13:15:56 +0000 (15:15 +0200)]
usb: renesas_usbhs: add suspend event support in gadget mode
[ Upstream commit
39abcc84846bbc0538f13c190b6a9c7e36890cd2 ]
When R-Car Gen3 USB 2.0 is in Gadget mode, if host is detached an interrupt
will be generated and Suspended state bit is set in interrupt status
register. Interrupt handler will call driver->suspend(composite_suspend)
if suspended state bit is set. composite_suspend will call
ffs_func_suspend which will post FUNCTIONFS_SUSPEND and will be consumed
by user space application via /dev/ep0.
To be able to detect host detach, extend the DVSQ_MASK to cover the
Suspended bit of the DVSQ[2:0] bitfield from the Interrupt Status
Register 0 (INTSTS0) register and perform appropriate action in the
DVST interrupt handler (usbhsg_irq_dev_state).
Without this commit, disconnection of the phone from R-Car-H3 ES2.0
Salvator-X CN9 port is not recognized and reverse role switch does
not happen. If phone is connected again it does not enumerate.
With this commit, disconnection will be recognized and reverse role
switch will happen by a user space application. If phone is connected
again it will enumerate properly and will become visible in the output
of 'lsusb'.
Signed-off-by: Veeraiyan Chidambaram <veeraiyan.chidambaram@in.bosch.com>
Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/1568207756-22325-3-git-send-email-external.veeraiyan.c@de.adit-jv.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Stanimir Varbanov [Tue, 17 Sep 2019 12:02:26 +0000 (09:02 -0300)]
media: venus: Fix occasionally failures to suspend
[ Upstream commit
8dbebb2bd01e6f36e9a215dcde99ace70408f2c8 ]
Failure to suspend (venus_suspend_3xx) happens when the system
is fresh booted and loading venus driver. This happens once and
after reload the venus driver modules the problem disrepair.
Fix the failure by skipping the check for WFI and IDLE bits if
PC_READY is on in control status register.
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ivan Khoronzhuk [Wed, 2 Oct 2019 12:04:04 +0000 (15:04 +0300)]
selftests/bpf: Correct path to include msg + path
[ Upstream commit
c588146378962786ddeec817f7736a53298a7b01 ]
The "path" buf is supposed to contain path + printf msg up to 24 bytes.
It will be cut anyway, but compiler generates truncation warns like:
"
samples/bpf/../../tools/testing/selftests/bpf/cgroup_helpers.c: In
function ‘setup_cgroup_environment’:
samples/bpf/../../tools/testing/selftests/bpf/cgroup_helpers.c:52:34:
warning: ‘/cgroup.controllers’ directive output may be truncated
writing 19 bytes into a region of size between 1 and 4097
[-Wformat-truncation=]
snprintf(path, sizeof(path), "%s/cgroup.controllers", cgroup_path);
^~~~~~~~~~~~~~~~~~~
samples/bpf/../../tools/testing/selftests/bpf/cgroup_helpers.c:52:2:
note: ‘snprintf’ output between 20 and 4116 bytes into a destination
of size 4097
snprintf(path, sizeof(path), "%s/cgroup.controllers", cgroup_path);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
samples/bpf/../../tools/testing/selftests/bpf/cgroup_helpers.c:72:34:
warning: ‘/cgroup.subtree_control’ directive output may be truncated
writing 23 bytes into a region of size between 1 and 4097
[-Wformat-truncation=]
snprintf(path, sizeof(path), "%s/cgroup.subtree_control",
^~~~~~~~~~~~~~~~~~~~~~~
cgroup_path);
samples/bpf/../../tools/testing/selftests/bpf/cgroup_helpers.c:72:2:
note: ‘snprintf’ output between 24 and 4120 bytes into a destination
of size 4097
snprintf(path, sizeof(path), "%s/cgroup.subtree_control",
cgroup_path);
"
In order to avoid warns, lets decrease buf size for cgroup workdir on
24 bytes with assumption to include also "/cgroup.subtree_control" to
the address. The cut will never happen anyway.
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20191002120404.26962-3-ivan.khoronzhuk@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Allen Pais [Wed, 18 Sep 2019 16:30:31 +0000 (22:00 +0530)]
drm/amdkfd: fix a potential NULL pointer dereference (v2)
[ Upstream commit
81de29d842ccb776c0f77aa3e2b11b07fff0c0e2 ]
alloc_workqueue is not checked for errors and as a result,
a potential NULL dereference could occur.
v2 (Felix Kuehling):
* Fix compile error (kfifo_free instead of fifo_free)
* Return proper error code
Signed-off-by: Allen Pais <allen.pais@oracle.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Will Deacon [Wed, 2 Oct 2019 12:42:06 +0000 (13:42 +0100)]
pinctrl: devicetree: Avoid taking direct reference to device name string
[ Upstream commit
be4c60b563edee3712d392aaeb0943a768df7023 ]
When populating the pinctrl mapping table entries for a device, the
'dev_name' field for each entry is initialised to point directly at the
string returned by 'dev_name()' for the device and subsequently used by
'create_pinctrl()' when looking up the mappings for the device being
probed.
This is unreliable in the presence of calls to 'dev_set_name()', which may
reallocate the device name string leaving the pinctrl mappings with a
dangling reference. This then leads to a use-after-free every time the
name is dereferenced by a device probe:
| BUG: KASAN: invalid-access in strcmp+0x20/0x64
| Read of size 1 at addr
13ffffc153494b00 by task modprobe/590
| Pointer tag: [13], memory tag: [fe]
|
| Call trace:
| __kasan_report+0x16c/0x1dc
| kasan_report+0x10/0x18
| check_memory_region
| __hwasan_load1_noabort+0x4c/0x54
| strcmp+0x20/0x64
| create_pinctrl+0x18c/0x7f4
| pinctrl_get+0x90/0x114
| devm_pinctrl_get+0x44/0x98
| pinctrl_bind_pins+0x5c/0x450
| really_probe+0x1c8/0x9a4
| driver_probe_device+0x120/0x1d8
Follow the example of sysfs, and duplicate the device name string before
stashing it away in the pinctrl mapping entries.
Cc: Linus Walleij <linus.walleij@linaro.org>
Reported-by: Elena Petrova <lenaptr@google.com>
Tested-by: Elena Petrova <lenaptr@google.com>
Signed-off-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20191002124206.22928-1-will@kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ben Greear [Wed, 18 Oct 2017 00:03:12 +0000 (17:03 -0700)]
ath10k: fix offchannel tx failure when no ath10k_mac_tx_frm_has_freq
[ Upstream commit
cc6df017e55764ffef9819dd9554053182535ffd ]
Offchannel management frames were failing:
[18099.253732] ath10k_pci 0000:01:00.0: timed out waiting for offchannel skb
cf0e3780
[18102.293686] ath10k_pci 0000:01:00.0: timed out waiting for offchannel skb
cf0e3780
[18105.333653] ath10k_pci 0000:01:00.0: timed out waiting for offchannel skb
cf0e3780
[18108.373712] ath10k_pci 0000:01:00.0: timed out waiting for offchannel skb
cf0e3780
[18111.413687] ath10k_pci 0000:01:00.0: timed out waiting for offchannel skb
cf0e36c0
[18114.453726] ath10k_pci 0000:01:00.0: timed out waiting for offchannel skb
cf0e3f00
[18117.493773] ath10k_pci 0000:01:00.0: timed out waiting for offchannel skb
cf0e36c0
[18120.533631] ath10k_pci 0000:01:00.0: timed out waiting for offchannel skb
cf0e3f00
This bug appears to have been added between 4.0 (which works for us),
and 4.4, which does not work.
I think this is because the tx-offchannel logic gets in a loop when
ath10k_mac_tx_frm_has_freq(ar) is false, so pkt is never actually
sent to the firmware for transmit.
This patch fixes the problem on 4.9 for me, and now HS20 clients
can work again with my firmware.
Antonio: tested with 10.4-3.5.3-00057 on QCA4019 and QCA9888
Signed-off-by: Ben Greear <greearb@candelatech.com>
Tested-by: Antonio Quartulli <antonio.quartulli@kaiwoo.ai>
[kvalo@codeaurora.org: improve commit log, remove unneeded parenthesis]
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Loic Poulain [Wed, 11 Sep 2019 14:45:59 +0000 (11:45 -0300)]
media: venus: core: Fix msm8996 frequency table
[ Upstream commit
c690435ed07901737e5c007a65ec59f53b33eb71 ]
In downstream driver, there are two frequency tables defined,
one for the encoder and one for the decoder:
/* Encoders /
<972000
490000000 0x55555555>, / 4k UHD @ 30 /
<489600
320000000 0x55555555>, / 1080p @ 60 /
<244800
150000000 0x55555555>, / 1080p @ 30 /
<108000
75000000 0x55555555>, / 720p @ 30 */
/* Decoders /
<1944000
490000000 0xffffffff>, / 4k UHD @ 60 /
< 972000
320000000 0xffffffff>, / 4k UHD @ 30 /
< 489600
150000000 0xffffffff>, / 1080p @ 60 /
< 244800
75000000 0xffffffff>; / 1080p @ 30 */
It shows that encoder always needs a higher clock than decoder.
In current venus driver, the unified frequency table is aligned
with the downstream decoder table which causes performance issues
in encoding scenarios. Fix that by aligning frequency table on
worst case (encoding).
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Nathan Chancellor [Fri, 27 Sep 2019 16:26:42 +0000 (09:26 -0700)]
tools/power/cpupower: Fix initializer override in hsw_ext_cstates
[ Upstream commit
7e5705c635ecfccde559ebbbe1eaf05b5cc60529 ]
When building cpupower with clang, the following warning appears:
utils/idle_monitor/hsw_ext_idle.c:42:16: warning: initializer overrides
prior initialization of this subobject [-Winitializer-overrides]
.desc = N_("Processor Package C2"),
^~~~~~~~~~~~~~~~~~~~~~
./utils/helpers/helpers.h:25:33: note: expanded from macro 'N_'
#define N_(String) gettext_noop(String)
^~~~~~
./utils/helpers/helpers.h:23:30: note: expanded from macro
'gettext_noop'
#define gettext_noop(String) String
^~~~~~
utils/idle_monitor/hsw_ext_idle.c:41:16: note: previous initialization
is here
.desc = N_("Processor Package C9"),
^~~~~~~~~~~~~~~~~~~~~~
./utils/helpers/helpers.h:25:33: note: expanded from macro 'N_'
#define N_(String) gettext_noop(String)
^~~~~~
./utils/helpers/helpers.h:23:30: note: expanded from macro
'gettext_noop'
#define gettext_noop(String) String
^~~~~~
1 warning generated.
This appears to be a copy and paste or merge mistake because the name
and id fields both have PC9 in them, not PC2. Remove the second
assignment to fix the warning.
Fixes:
7ee767b69b68 ("cpupower: Add Haswell family 0x45 specific idle monitor to show PC8,9,10 states")
Link: https://github.com/ClangBuiltLinux/linux/issues/718
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Janusz Krzysztofik [Tue, 3 Sep 2019 20:11:44 +0000 (17:11 -0300)]
media: ov6650: Fix stored crop rectangle not in sync with hardware
[ Upstream commit
1463b371aff0682c70141f7521db13cc4bbf3016 ]
The driver stores crop rectangle settings supposed to be in line with
hardware state in a device private structure. Since the driver initial
submission, crop rectangle width and height settings are not updated
correctly when rectangle offset settings are applied on hardware. If
an error occurs while the device is updated, the stored settings my no
longer reflect hardware state and consecutive calls to .get_selection()
as well as .get/set_fmt() may return incorrect information. That in
turn may affect ability of a bridge device to use correct DMA transfer
settings if such incorrect informamtion on active frame format returned
by .get/set_fmt() is used.
Assuming a failed update of the device means its actual settings haven't
changed, update crop rectangle width and height settings stored in the
device private structure correctly while the rectangle offset is
successfully applied on hardware so the stored values always reflect
actual hardware state to the extent possible.
Fixes:
2f6e2404799a ("[media] SoC Camera: add driver for OV6650 sensor")
Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Janusz Krzysztofik [Tue, 3 Sep 2019 20:11:43 +0000 (17:11 -0300)]
media: ov6650: Fix stored frame format not in sync with hardware
[ Upstream commit
3143b459de4cdcce67b36827476c966e93c1cf01 ]
The driver stores frame format settings supposed to be in line with
hardware state in a device private structure. Since the driver initial
submission, those settings are updated before they are actually applied
on hardware. If an error occurs on device update, the stored settings
my not reflect hardware state anymore and consecutive calls to
.get_fmt() may return incorrect information. That in turn may affect
ability of a bridge device to use correct DMA transfer settings if such
incorrect informmation on active frame format returned by .get_fmt() is
used.
Assuming a failed device update means its state hasn't changed, update
frame format related settings stored in the device private structure
only after they are successfully applied so the stored values always
reflect hardware state as closely as possible.
Fixes:
2f6e2404799a ("[media] SoC Camera: add driver for OV6650 sensor")
Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Benoit Parrot [Mon, 30 Sep 2019 13:06:43 +0000 (10:06 -0300)]
media: i2c: ov2659: Fix missing 720p register config
[ Upstream commit
9d669fbfca20e6035ead814e55d9ef1a6b500540 ]
The initial registers sequence is only loaded at probe
time. Afterward only the resolution and format specific
register are modified. Care must be taken to make sure
registers modified by one resolution setting are reverted
back when another resolution is programmed.
This was not done properly for the 720p case.
Signed-off-by: Benoit Parrot <bparrot@ti.com>
Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Janusz Krzysztofik [Tue, 3 Sep 2019 20:11:38 +0000 (17:11 -0300)]
media: ov6650: Fix crop rectangle alignment not passed back
[ Upstream commit
7b188d6ba27a131e7934a51a14ece331c0491f18 ]
Commit
4f996594ceaf ("[media] v4l2: make vidioc_s_crop const")
introduced a writable copy of constified user requested crop rectangle
in order to be able to perform hardware alignments on it. Later
on, commit
10d5509c8d50 ("[media] v4l2: remove g/s_crop from video
ops") replaced s_crop() video operation using that const argument with
set_selection() pad operation which had a corresponding argument not
constified, however the original behavior of the driver was not
restored. Since that time, any hardware alignment applied on a user
requested crop rectangle is not passed back to the user calling
.set_selection() as it should be.
Fix the issue by dropping the copy and replacing all references to it
with references to the crop rectangle embedded in the user argument.
Fixes:
10d5509c8d50 ("[media] v4l2: remove g/s_crop from video ops")
Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Benoit Parrot [Mon, 30 Sep 2019 13:06:40 +0000 (10:06 -0300)]
media: i2c: ov2659: fix s_stream return value
[ Upstream commit
85c4043f1d403c222d481dfc91846227d66663fb ]
In ov2659_s_stream() return value for invoked function should be checked
and propagated.
Signed-off-by: Benoit Parrot <bparrot@ti.com>
Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Benoit Parrot [Fri, 20 Sep 2019 17:05:48 +0000 (14:05 -0300)]
media: am437x-vpfe: Setting STD to current value is not an error
[ Upstream commit
13aa21cfe92ce9ebb51824029d89f19c33f81419 ]
VIDIOC_S_STD should not return an error if the value is identical
to the current one.
This error was highlighted by the v4l2-compliance test.
Signed-off-by: Benoit Parrot <bparrot@ti.com>
Acked-by: Lad Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Max Gurtovoy [Tue, 24 Sep 2019 21:03:47 +0000 (00:03 +0300)]
IB/iser: bound protection_sg size by data_sg size
[ Upstream commit
7718cf03c3ce4b6ebd90107643ccd01c952a1fce ]
In case we don't set the sg_prot_tablesize, the scsi layer assign the
default size (65535 entries). We should limit this size since we should
take into consideration the underlaying device capability. This cap is
considered when calculating the sg_tablesize. Otherwise, for example,
we can get that /sys/block/sdb/queue/max_segments is 128 and
/sys/block/sdb/queue/max_integrity_segments is 65535.
Link: https://lore.kernel.org/r/1569359027-10987-1-git-send-email-maxg@mellanox.com
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Anilkumar Kolli [Thu, 26 Sep 2019 13:37:01 +0000 (19:07 +0530)]
ath10k: fix backtrace on coredump
[ Upstream commit
d98ddae85a4a57124f87960047b1b6419312147f ]
In a multiradio board with one QCA9984 and one AR9987
after enabling the crashdump with module parameter
coredump_mask=7, below backtrace is seen.
vmalloc: allocation failure: 0 bytes
kworker/u4:0: page allocation failure: order:0, mode:0x80d2
CPU: 0 PID: 6 Comm: kworker/u4:0 Not tainted 3.14.77 #130
Workqueue: ath10k_wq ath10k_core_register_work [ath10k_core]
(unwind_backtrace) from [<
c021abf8>] (show_stack+0x10/0x14)
(dump_stack+0x80/0xa0)
(warn_alloc_failed+0xd0/0xfc)
(__vmalloc_node_range+0x1b4/0x1d8)
(__vmalloc_node+0x34/0x40)
(vzalloc+0x24/0x30)
(ath10k_coredump_register+0x6c/0x88 [ath10k_core])
(ath10k_core_register_work+0x350/0xb34 [ath10k_core])
(process_one_work+0x20c/0x32c)
(worker_thread+0x228/0x360)
This is due to ath10k_hw_mem_layout is not defined for AR9987.
For coredump undefined hw ramdump_size is 0.
Check for the ramdump_size before allocation memory.
Tested on: AR9987, QCA9984
FW version: 10.4-3.9.0.2-00044
Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Allen Pais [Wed, 18 Sep 2019 16:35:00 +0000 (22:05 +0530)]
libertas: fix a potential NULL pointer dereference
[ Upstream commit
7da413a18583baaf35dd4a8eb414fa410367d7f2 ]
alloc_workqueue is not checked for errors and as a result,
a potential NULL dereference could occur.
Signed-off-by: Allen Pais <allen.pais@oracle.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Navid Emamdoost [Wed, 25 Sep 2019 01:20:21 +0000 (20:20 -0500)]
rtlwifi: prevent memory leak in rtl_usb_probe
[ Upstream commit
3f93616951138a598d930dcaec40f2bfd9ce43bb ]
In rtl_usb_probe if allocation for usb_data fails the allocated hw
should be released. In addition the allocated rtlpriv->usb_data should
be released on error handling path.
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Connor Kuehl [Thu, 26 Sep 2019 15:03:17 +0000 (08:03 -0700)]
staging: rtl8188eu: fix possible null dereference
[ Upstream commit
228241944a48113470d3c3b46c88ba7fbe0a274b ]
Inside a nested 'else' block at the beginning of this function is a
call that assigns 'psta' to the return value of 'rtw_get_stainfo()'.
If 'rtw_get_stainfo()' returns NULL and the flow of control reaches
the 'else if' where 'psta' is dereferenced, then we will dereference
a NULL pointer.
Fix this by checking if 'psta' is not NULL before reading its
'psta->qos_option' data member.
Addresses-Coverity: ("Dereference null return value")
Signed-off-by: Connor Kuehl <connor.kuehl@canonical.com>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Link: https://lore.kernel.org/r/20190926150317.5894-1-connor.kuehl@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Navid Emamdoost [Fri, 20 Sep 2019 02:51:33 +0000 (21:51 -0500)]
staging: rtl8192u: fix multiple memory leaks on error path
[ Upstream commit
ca312438cf176a16d4b89350cade8789ba8d7133 ]
In rtl8192_tx on error handling path allocated urbs and also skb should
be released.
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Link: https://lore.kernel.org/r/20190920025137.29407-1-navid.emamdoost@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Lukasz Majewski [Wed, 25 Sep 2019 09:11:42 +0000 (11:11 +0200)]
spi: Add call to spi_slave_abort() function when spidev driver is released
[ Upstream commit
9f918a728cf86b2757b6a7025e1f46824bfe3155 ]
This change is necessary for spidev devices (e.g. /dev/spidev3.0) working
in the slave mode (like NXP's dspi driver for Vybrid SoC).
When SPI HW works in this mode - the master is responsible for providing
CS and CLK signals. However, when some fault happens - like for example
distortion on SPI lines - the SPI Linux driver needs a chance to recover
from this abnormal situation and prepare itself for next (correct)
transmission.
This change doesn't pose any threat on drivers working in master mode as
spi_slave_abort() function checks if SPI slave mode is supported.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Link: https://lore.kernel.org/r/20190924110547.14770-2-lukma@denx.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Reported-by: kbuild test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/20190925091143.15468-2-lukma@denx.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Christian König [Mon, 9 Sep 2019 11:57:32 +0000 (13:57 +0200)]
drm/amdgpu: grab the id mgr lock while accessing passid_mapping
[ Upstream commit
6817bf283b2b851095825ec7f0e9f10398e09125 ]
Need to make sure that we actually dropping the right fence.
Could be done with RCU as well, but to complicated for a fix.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Krzysztof Wilczynski [Fri, 13 Sep 2019 20:24:13 +0000 (22:24 +0200)]
iio: light: bh1750: Resolve compiler warning and make code more readable
[ Upstream commit
f552fde983d378e7339f9ea74a25f918563bf0d3 ]
Separate the declaration of struct bh1750_chip_info from definition
of bh1750_chip_info_tbl[] in a single statement as it makes the code
hard to read, and with the extra newline it makes it look as if the
bh1750_chip_info_tbl[] had no explicit type.
This change also resolves the following compiler warning about the
unusual position of the static keyword that can be seen when building
with warnings enabled (W=1):
drivers/iio/light/bh1750.c:64:1: warning:
‘static’ is not at beginning of declaration [-Wold-style-declaration]
Related to commit
3a11fbb037a1 ("iio: light: add support for ROHM
BH1710/BH1715/BH1721/BH1750/BH1751 ambient light sensors").
Signed-off-by: Krzysztof Wilczynski <kw@linux.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Brian Masney [Thu, 15 Aug 2019 00:48:46 +0000 (20:48 -0400)]
drm/bridge: analogix-anx78xx: silence -EPROBE_DEFER warnings
[ Upstream commit
2708e876272d89bbbff811d12834adbeef85f022 ]
Silence two warning messages that occur due to -EPROBE_DEFER errors to
help cleanup the system boot log.
Signed-off-by: Brian Masney <masneyb@onstation.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190815004854.19860-4-masneyb@onstation.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Laurent Pinchart [Fri, 23 Aug 2019 19:32:42 +0000 (22:32 +0300)]
drm/panel: Add missing drm_panel_init() in panel drivers
[ Upstream commit
65abbda8ed7ca48c8807d6b04a77431b438fa659 ]
Panels must be initialised with drm_panel_init(). Add the missing
function call in the panel-raspberrypi-touchscreen.c and
panel-sitronix-st7789v.c drivers.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190823193245.23876-2-laurent.pinchart@ideasonboard.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sean Paul [Thu, 29 Aug 2019 16:52:19 +0000 (12:52 -0400)]
drm: mst: Fix query_payload ack reply struct
[ Upstream commit
268de6530aa18fe5773062367fd119f0045f6e88 ]
Spec says[1] Allocated_PBN is 16 bits
[1]- DisplayPort 1.2 Spec, Section 2.11.9.8, Table 2-98
Fixes:
ad7f8a1f9ced ("drm/helper: add Displayport multi-stream helper (v0.6)")
Cc: Lyude Paul <lyude@redhat.com>
Cc: Todd Previte <tprevite@gmail.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190829165223.129662-1-sean@poorly.run
Signed-off-by: Sasha Levin <sashal@kernel.org>
Takashi Iwai [Fri, 13 Dec 2019 08:51:11 +0000 (09:51 +0100)]
ALSA: hda/ca0132 - Fix work handling in delayed HP detection
commit
42fb6b1d41eb5905d77c06cad2e87b70289bdb76 upstream.
CA0132 has the delayed HP jack detection code that is invoked from the
unsol handler, but it does a few weird things: it contains the cancel
of a work inside the work handler, and yet it misses the cancel-sync
call at (runtime-)suspend. This patch addresses those issues.
Fixes:
15c2b3cc09a3 ("ALSA: hda/ca0132 - Fix possible workqueue stall")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191213085111.22855-4-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Takashi Iwai [Fri, 13 Dec 2019 08:51:10 +0000 (09:51 +0100)]
ALSA: hda/ca0132 - Avoid endless loop
commit
cb04fc3b6b076f67d228a0b7d096c69ad486c09c upstream.
Introduce a timeout to dspio_clear_response_queue() so that it won't
be caught in an endless loop even if the hardware doesn't respond
properly.
Fixes:
a73d511c4867 ("ALSA: hda/ca0132: Add unsol handler for DSP and jack detection")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191213085111.22855-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Takashi Iwai [Fri, 13 Dec 2019 08:51:09 +0000 (09:51 +0100)]
ALSA: hda/ca0132 - Keep power on during processing DSP response
commit
377bc0cfabce0244632dada19060839ced4e6949 upstream.
We need to keep power on while processing the DSP response via unsol
event. Each snd_hda_codec_read() call does the power management, so
it should work normally, but still it's safer to keep the power up for
the whole function.
Fixes:
a73d511c4867 ("ALSA: hda/ca0132: Add unsol handler for DSP and jack detection")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191213085111.22855-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Takashi Iwai [Wed, 11 Dec 2019 15:57:42 +0000 (16:57 +0100)]
ALSA: pcm: Avoid possible info leaks from PCM stream buffers
commit
add9d56d7b3781532208afbff5509d7382fb6efe upstream.
The current PCM code doesn't initialize explicitly the buffers
allocated for PCM streams, hence it might leak some uninitialized
kernel data or previous stream contents by mmapping or reading the
buffer before actually starting the stream.
Since this is a common problem, this patch simply adds the clearance
of the buffer data at hw_params callback. Although this does only
zero-clear no matter which format is used, which doesn't mean the
silence for some formats, but it should be OK because the intention is
just to clear the previous data on the buffer.
Reported-by: Lionel Koenig <lionel.koenig@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191211155742.3213-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Filipe Manana [Fri, 6 Dec 2019 12:27:39 +0000 (12:27 +0000)]
Btrfs: fix removal logic of the tree mod log that leads to use-after-free issues
commit
6609fee8897ac475378388238456c84298bff802 upstream.
When a tree mod log user no longer needs to use the tree it calls
btrfs_put_tree_mod_seq() to remove itself from the list of users and
delete all no longer used elements of the tree's red black tree, which
should be all elements with a sequence number less then our equals to
the caller's sequence number. However the logic is broken because it
can delete and free elements from the red black tree that have a
sequence number greater then the caller's sequence number:
1) At a point in time we have sequence numbers 1, 2, 3 and 4 in the
tree mod log;
2) The task which got assigned the sequence number 1 calls
btrfs_put_tree_mod_seq();
3) Sequence number 1 is deleted from the list of sequence numbers;
4) The current minimum sequence number is computed to be the sequence
number 2;
5) A task using sequence number 2 is at tree_mod_log_rewind() and gets
a pointer to one of its elements from the red black tree through
a call to tree_mod_log_search();
6) The task with sequence number 1 iterates the red black tree of tree
modification elements and deletes (and frees) all elements with a
sequence number less then or equals to 2 (the computed minimum sequence
number) - it ends up only leaving elements with sequence numbers of 3
and 4;
7) The task with sequence number 2 now uses the pointer to its element,
already freed by the other task, at __tree_mod_log_rewind(), resulting
in a use-after-free issue. When CONFIG_DEBUG_PAGEALLOC=y it produces
a trace like the following:
[16804.546854] general protection fault: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC PTI
[16804.547451] CPU: 0 PID: 28257 Comm: pool Tainted: G W 5.4.0-rc8-btrfs-next-51 #1
[16804.548059] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-0-ga698c8995f-prebuilt.qemu.org 04/01/2014
[16804.548666] RIP: 0010:rb_next+0x16/0x50
(...)
[16804.550581] RSP: 0018:
ffffb948418ef9b0 EFLAGS:
00010202
[16804.551227] RAX:
6b6b6b6b6b6b6b6b RBX:
ffff90e0247f6600 RCX:
6b6b6b6b6b6b6b6b
[16804.551873] RDX:
0000000000000000 RSI:
0000000000000000 RDI:
ffff90e0247f6600
[16804.552504] RBP:
ffff90dffe0d4688 R08:
0000000000000001 R09:
0000000000000000
[16804.553136] R10:
ffff90dffa4a0040 R11:
0000000000000000 R12:
000000000000002e
[16804.553768] R13:
ffff90e0247f6600 R14:
0000000000001663 R15:
ffff90dff77862b8
[16804.554399] FS:
00007f4b197ae700(0000) GS:
ffff90e036a00000(0000) knlGS:
0000000000000000
[16804.555039] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[16804.555683] CR2:
00007f4b10022000 CR3:
00000002060e2004 CR4:
00000000003606f0
[16804.556336] DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
[16804.556968] DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
[16804.557583] Call Trace:
[16804.558207] __tree_mod_log_rewind+0xbf/0x280 [btrfs]
[16804.558835] btrfs_search_old_slot+0x105/0xd00 [btrfs]
[16804.559468] resolve_indirect_refs+0x1eb/0xc70 [btrfs]
[16804.560087] ? free_extent_buffer.part.19+0x5a/0xc0 [btrfs]
[16804.560700] find_parent_nodes+0x388/0x1120 [btrfs]
[16804.561310] btrfs_check_shared+0x115/0x1c0 [btrfs]
[16804.561916] ? extent_fiemap+0x59d/0x6d0 [btrfs]
[16804.562518] extent_fiemap+0x59d/0x6d0 [btrfs]
[16804.563112] ? __might_fault+0x11/0x90
[16804.563706] do_vfs_ioctl+0x45a/0x700
[16804.564299] ksys_ioctl+0x70/0x80
[16804.564885] ? trace_hardirqs_off_thunk+0x1a/0x20
[16804.565461] __x64_sys_ioctl+0x16/0x20
[16804.566020] do_syscall_64+0x5c/0x250
[16804.566580] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[16804.567153] RIP: 0033:0x7f4b1ba2add7
(...)
[16804.568907] RSP: 002b:
00007f4b197adc88 EFLAGS:
00000246 ORIG_RAX:
0000000000000010
[16804.569513] RAX:
ffffffffffffffda RBX:
00007f4b100210d8 RCX:
00007f4b1ba2add7
[16804.570133] RDX:
00007f4b100210d8 RSI:
00000000c020660b RDI:
0000000000000003
[16804.570726] RBP:
000055de05a6cfe0 R08:
0000000000000000 R09:
00007f4b197add44
[16804.571314] R10:
0000000000000000 R11:
0000000000000246 R12:
00007f4b197add48
[16804.571905] R13:
00007f4b197add40 R14:
00007f4b100210d0 R15:
00007f4b197add50
(...)
[16804.575623] ---[ end trace
87317359aad4ba50 ]---
Fix this by making btrfs_put_tree_mod_seq() skip deletion of elements that
have a sequence number equals to the computed minimum sequence number, and
not just elements with a sequence number greater then that minimum.
Fixes:
bd989ba359f2ac ("Btrfs: add tree modification log functions")
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Josef Bacik [Fri, 6 Dec 2019 16:39:00 +0000 (11:39 -0500)]
btrfs: handle ENOENT in btrfs_uuid_tree_iterate
commit
714cd3e8cba6841220dce9063a7388a81de03825 upstream.
If we get an -ENOENT back from btrfs_uuid_iter_rem when iterating the
uuid tree we'll just continue and do btrfs_next_item(). However we've
done a btrfs_release_path() at this point and no longer have a valid
path. So increment the key and go back and do a normal search.
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Josef Bacik [Fri, 6 Dec 2019 14:37:18 +0000 (09:37 -0500)]
btrfs: do not leak reloc root if we fail to read the fs root
commit
ca1aa2818a53875cfdd175fb5e9a2984e997cce9 upstream.
If we fail to read the fs root corresponding with a reloc root we'll
just break out and free the reloc roots. But we remove our current
reloc_root from this list higher up, which means we'll leak this
reloc_root. Fix this by adding ourselves back to the reloc_roots list
so we are properly cleaned up.
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Josef Bacik [Fri, 6 Dec 2019 14:37:17 +0000 (09:37 -0500)]
btrfs: skip log replay on orphaned roots
commit
9bc574de590510eff899c3ca8dbaf013566b5efe upstream.
My fsstress modifications coupled with generic/475 uncovered a failure
to mount and replay the log if we hit a orphaned root. We do not want
to replay the log for an orphan root, but it's completely legitimate to
have an orphaned root with a log attached. Fix this by simply skipping
replaying the log. We still need to pin it's root node so that we do
not overwrite it while replaying other logs, as we re-read the log root
at every stage of the replay.
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Josef Bacik [Fri, 6 Dec 2019 14:37:15 +0000 (09:37 -0500)]
btrfs: abort transaction after failed inode updates in create_subvol
commit
c7e54b5102bf3614cadb9ca32d7be73bad6cecf0 upstream.
We can just abort the transaction here, and in fact do that for every
other failure in this function except these two cases.
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
projects / platform / kernel / linux-rpi.git / log