Wei Yongjun [Mon, 8 Mar 2021 12:35:01 +0000 (12:35 +0000)]
umem: fix error return code in mm_pci_probe()
[ Upstream commit
eeb05595d22c19c8f814ff893dcf88ec277a2365 ]
Fix to return negative error code -ENOMEM from the blk_alloc_queue()
and dma_alloc_coherent() error handling cases instead of 0, as done
elsewhere in this function.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Link: https://lore.kernel.org/r/20210308123501.2573816-1-weiyongjun1@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jiri Slaby [Wed, 3 Mar 2021 10:43:14 +0000 (11:43 +0100)]
kbuild: dummy-tools: fix inverted tests for gcc
[ Upstream commit
b3d9fc1436808a4ef9927e558b3415e728e710c5 ]
There is a test in Kconfig which takes inverted value of a compiler
check:
* config CC_HAS_INT128
def_bool !$(cc-option,$(m64-flag) -D__SIZEOF_INT128__=0)
This results in CC_HAS_INT128 not being in super-config generated by
dummy-tools. So take this into account in the gcc script.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Masahiro Yamada [Sun, 28 Feb 2021 06:10:25 +0000 (15:10 +0900)]
kbuild: add image_name to no-sync-config-targets
[ Upstream commit
993bdde94547887faaad4a97f0b0480a6da271c3 ]
'make image_name' needs include/config/auto.conf to show the correct
output because KBUILD_IMAGE depends on CONFIG options, but should not
attempt to resync the configuration.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Paul Cercueil [Sun, 7 Mar 2021 17:20:14 +0000 (17:20 +0000)]
irqchip/ingenic: Add support for the JZ4760
[ Upstream commit
5fbecd2389f48e1415799c63130d0cdce1cf3f60 ]
Add support for the interrupt controller found in the JZ4760 SoC, which
works exactly like the one in the JZ4770.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210307172014.73481-2-paul@crapouillou.net
Signed-off-by: Sasha Levin <sashal@kernel.org>
Paulo Alcantara [Mon, 8 Mar 2021 15:00:48 +0000 (12:00 -0300)]
cifs: change noisy error message to FYI
[ Upstream commit
e3d100eae44b42f309c1366efb8397368f1cf8ed ]
A customer has reported that their dmesg were being flooded by
CIFS: VFS: \\server Cancelling wait for mid xxx cmd: a
CIFS: VFS: \\server Cancelling wait for mid yyy cmd: b
CIFS: VFS: \\server Cancelling wait for mid zzz cmd: c
because some processes that were performing statfs(2) on the share had
been interrupted due to their automount setup when certain users
logged in and out.
Change it to FYI as they should be mostly informative rather than
error messages.
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Tong Zhang [Mon, 8 Mar 2021 03:25:30 +0000 (22:25 -0500)]
atm: idt77252: fix null-ptr-dereference
[ Upstream commit
4416e98594dc04590ebc498fc4e530009535c511 ]
this one is similar to the phy_data allocation fix in uPD98402, the
driver allocate the idt77105_priv and store to dev_data but later
dereference using dev->dev_data, which will cause null-ptr-dereference.
fix this issue by changing dev_data to phy_data so that PRIV(dev) can
work correctly.
Signed-off-by: Tong Zhang <ztong0001@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Tong Zhang [Mon, 8 Mar 2021 03:25:29 +0000 (22:25 -0500)]
atm: uPD98402: fix incorrect allocation
[ Upstream commit
3153724fc084d8ef640c611f269ddfb576d1dcb1 ]
dev->dev_data is set in zatm.c, calling zatm_start() will overwrite this
dev->dev_data in uPD98402_start() and a subsequent PRIV(dev)->lock
(i.e dev->phy_data->lock) will result in a null-ptr-dereference.
I believe this is a typo and what it actually want to do is to allocate
phy_data instead of dev_data.
Signed-off-by: Tong Zhang <ztong0001@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Alex Marginean [Sun, 7 Mar 2021 13:23:38 +0000 (15:23 +0200)]
net: enetc: set MAC RX FIFO to recommended value
[ Upstream commit
1b2395dfff5bb40228a187f21f577cd90673d344 ]
On LS1028A, the MAC RX FIFO defaults to the value 2, which is too high
and may lead to RX lock-up under traffic at a rate higher than 6 Gbps.
Set it to 1 instead, as recommended by the hardware design team and by
later versions of the ENETC block guide.
Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com>
Reviewed-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Reviewed-by: Jason Liu <jason.hui.liu@nxp.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Paul Cercueil [Sun, 7 Mar 2021 13:17:49 +0000 (13:17 +0000)]
net: davicom: Use platform_get_irq_optional()
[ Upstream commit
2e2696223676d56db1a93acfca722c1b96cd552d ]
The second IRQ line really is optional, so use
platform_get_irq_optional() to obtain it.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jia-Ju Bai [Sun, 7 Mar 2021 09:12:56 +0000 (01:12 -0800)]
net: wan: fix error return code of uhdlc_init()
[ Upstream commit
62765d39553cfd1ad340124fe1e280450e8c89e2 ]
When priv->rx_skbuff or priv->tx_skbuff is NULL, no error return code of
uhdlc_init() is assigned.
To fix this bug, ret is assigned with -ENOMEM in these cases.
Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jia-Ju Bai [Sun, 7 Mar 2021 08:40:12 +0000 (00:40 -0800)]
net: hisilicon: hns: fix error return code of hns_nic_clear_all_rx_fetch()
[ Upstream commit
143c253f42bad20357e7e4432087aca747c43384 ]
When hns_assemble_skb() returns NULL to skb, no error return code of
hns_nic_clear_all_rx_fetch() is assigned.
To fix this bug, ret is assigned with -ENOMEM in this case.
Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Frank Sorenson [Mon, 8 Mar 2021 18:12:13 +0000 (12:12 -0600)]
NFS: Correct size calculation for create reply length
[ Upstream commit
ad3dbe35c833c2d4d0bbf3f04c785d32f931e7c9 ]
CREATE requests return a post_op_fh3, rather than nfs_fh3. The
post_op_fh3 includes an extra word to indicate 'handle_follows'.
Without that additional word, create fails when full 64-byte
filehandles are in use.
Add NFS3_post_op_fh_sz, and correct the size calculation for
NFS3_createres_sz.
Signed-off-by: Frank Sorenson <sorenson@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Timo Rothenpieler [Tue, 23 Feb 2021 14:19:01 +0000 (15:19 +0100)]
nfs: fix PNFS_FLEXFILE_LAYOUT Kconfig default
[ Upstream commit
a0590473c5e6c4ef17c3132ad08fbad170f72d55 ]
This follows what was done in
8c2fabc6542d9d0f8b16bd1045c2eda59bdcde13.
With the default being m, it's impossible to build the module into the
kernel.
Signed-off-by: Timo Rothenpieler <timo@rothenpieler.org>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yang Li [Tue, 23 Feb 2021 08:35:58 +0000 (16:35 +0800)]
gpiolib: acpi: Add missing IRQF_ONESHOT
[ Upstream commit
6e5d5791730b55a1f987e1db84b078b91eb49e99 ]
fixed the following coccicheck:
./drivers/gpio/gpiolib-acpi.c:176:7-27: ERROR: Threaded IRQ with no
primary handler requested without IRQF_ONESHOT
Make sure threaded IRQs without a primary handler are always request
with IRQF_ONESHOT
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sudeep Holla [Thu, 18 Feb 2021 22:23:26 +0000 (22:23 +0000)]
cpufreq: blacklist Arm Vexpress platforms in cpufreq-dt-platdev
[ Upstream commit
fbb31cb805fd3574d3be7defc06a7fd2fd9af7d2 ]
Add "arm,vexpress" to cpufreq-dt-platdev blacklist since the actual
scaling is handled by the firmware cpufreq drivers(scpi, scmi and
vexpress-spc).
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Bob Peterson [Thu, 25 Feb 2021 16:11:09 +0000 (11:11 -0500)]
gfs2: fix use-after-free in trans_drain
[ Upstream commit
1a5a2cfd34c17db73c53ef127272c8c1ae220485 ]
This patch adds code to function trans_drain to remove drained
bd elements from the ail lists, if queued, before freeing the bd.
If we don't remove the bd from the ail, function ail_drain will
try to reference the bd after it has been freed by trans_drain.
Thanks to Andy Price for his analysis of the problem.
Reported-by: Andy Price <anprice@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Aurelien Aptel [Thu, 4 Mar 2021 17:51:48 +0000 (17:51 +0000)]
cifs: ask for more credit on async read/write code paths
[ Upstream commit
88fd98a2306755b965e4f4567f84e73db3b6738c ]
When doing a large read or write workload we only
very gradually increase the number of credits
which can cause problems with parallelizing large i/o
(I/O ramps up more slowly than it should for large
read/write workloads) especially with multichannel
when the number of credits on the secondary channels
starts out low (e.g. less than about 130) or when
recovering after server throttled back the number
of credit.
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Michael Braun [Thu, 4 Mar 2021 19:52:52 +0000 (20:52 +0100)]
gianfar: fix jumbo packets+napi+rx overrun crash
[ Upstream commit
d8861bab48b6c1fc3cdbcab8ff9d1eaea43afe7f ]
When using jumbo packets and overrunning rx queue with napi enabled,
the following sequence is observed in gfar_add_rx_frag:
| lstatus | | skb |
t | lstatus, size, flags | first | len, data_len, *ptr |
---+--------------------------------------+-------+-----------------------+
13 |
18002348, 9032, INTERRUPT LAST | 0 | 9600, 8000,
f554c12e |
12 |
10000640, 1600, INTERRUPT | 0 | 8000, 6400,
f554c12e |
11 |
10000640, 1600, INTERRUPT | 0 | 6400, 4800,
f554c12e |
10 |
10000640, 1600, INTERRUPT | 0 | 4800, 3200,
f554c12e |
09 |
10000640, 1600, INTERRUPT | 0 | 3200, 1600,
f554c12e |
08 |
14000640, 1600, INTERRUPT FIRST | 0 | 1600, 0,
f554c12e |
07 |
14000640, 1600, INTERRUPT FIRST | 1 | 0, 0,
f554c12e |
06 |
1c000080, 128, INTERRUPT LAST FIRST | 1 | 0, 0,
abf3bd6e |
05 |
18002348, 9032, INTERRUPT LAST | 0 | 8000, 6400,
c5a57780 |
04 |
10000640, 1600, INTERRUPT | 0 | 6400, 4800,
c5a57780 |
03 |
10000640, 1600, INTERRUPT | 0 | 4800, 3200,
c5a57780 |
02 |
10000640, 1600, INTERRUPT | 0 | 3200, 1600,
c5a57780 |
01 |
10000640, 1600, INTERRUPT | 0 | 1600, 0,
c5a57780 |
00 |
14000640, 1600, INTERRUPT FIRST | 1 | 0, 0,
c5a57780 |
So at t=7 a new packets is started but not finished, probably due to rx
overrun - but rx overrun is not indicated in the flags. Instead a new
packets starts at t=8. This results in skb->len to exceed size for the LAST
fragment at t=13 and thus a negative fragment size added to the skb.
This then crashes:
kernel BUG at include/linux/skbuff.h:2277!
Oops: Exception in kernel mode, sig: 5 [#1]
...
NIP [
c04689f4] skb_pull+0x2c/0x48
LR [
c03f62ac] gfar_clean_rx_ring+0x2e4/0x844
Call Trace:
[
ec4bfd38] [
c06a84c4] _raw_spin_unlock_irqrestore+0x60/0x7c (unreliable)
[
ec4bfda8] [
c03f6a44] gfar_poll_rx_sq+0x48/0xe4
[
ec4bfdc8] [
c048d504] __napi_poll+0x54/0x26c
[
ec4bfdf8] [
c048d908] net_rx_action+0x138/0x2c0
[
ec4bfe68] [
c06a8f34] __do_softirq+0x3a4/0x4fc
[
ec4bfed8] [
c0040150] run_ksoftirqd+0x58/0x70
[
ec4bfee8] [
c0066ecc] smpboot_thread_fn+0x184/0x1cc
[
ec4bff08] [
c0062718] kthread+0x140/0x144
[
ec4bff38] [
c0012350] ret_from_kernel_thread+0x14/0x1c
This patch fixes this by checking for computed LAST fragment size, so a
negative sized fragment is never added.
In order to prevent the newer rx frame from getting corrupted, the FIRST
flag is checked to discard the incomplete older frame.
Signed-off-by: Michael Braun <michael-dev@fami-braun.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Denis Efremov [Fri, 5 Mar 2021 17:02:12 +0000 (20:02 +0300)]
sun/niu: fix wrong RXMAC_BC_FRM_CNT_COUNT count
[ Upstream commit
155b23e6e53475ca3b8c2a946299b4d4dd6a5a1e ]
RXMAC_BC_FRM_CNT_COUNT added to mp->rx_bcasts twice in a row
in niu_xmac_interrupt(). Remove the second addition.
Signed-off-by: Denis Efremov <efremov@linux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jia-Ju Bai [Fri, 5 Mar 2021 03:10:10 +0000 (19:10 -0800)]
net: intel: iavf: fix error return code of iavf_init_get_resources()
[ Upstream commit
6650d31f21b8a0043613ae0a4a2e42e49dc20b2d ]
When iavf_process_config() fails, no error return code of
iavf_init_get_resources() is assigned.
To fix this bug, err is assigned with the return value of
iavf_process_config(), and then err is checked.
Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jia-Ju Bai [Fri, 5 Mar 2021 02:06:48 +0000 (18:06 -0800)]
net: tehuti: fix error return code in bdx_probe()
[ Upstream commit
38c26ff3048af50eee3fcd591921357ee5bfd9ee ]
When bdx_read_mac() fails, no error return code of bdx_probe()
is assigned.
To fix this bug, err is assigned with -EFAULT as error return code.
Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Xunlei Pang [Fri, 5 Mar 2021 08:13:27 +0000 (16:13 +0800)]
blk-cgroup: Fix the recursive blkg rwstat
[ Upstream commit
4f44657d74873735e93a50eb25014721a66aac19 ]
The current blkio.throttle.io_service_bytes_recursive doesn't
work correctly.
As an example, for the following blkcg hierarchy:
(Made 1GB READ in test1, 512MB READ in test2)
test
/ \
test1 test2
$ head -n 1 test/test1/blkio.throttle.io_service_bytes_recursive
8:0 Read
1073684480
$ head -n 1 test/test2/blkio.throttle.io_service_bytes_recursive
8:0 Read
537448448
$ head -n 1 test/blkio.throttle.io_service_bytes_recursive
8:0 Read
537448448
Clearly, above data of "test" reflects "test2" not "test1"+"test2".
Do the correct summary in blkg_rwstat_recursive_sum().
Signed-off-by: Xunlei Pang <xlpang@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Nitin Rawat [Wed, 24 Feb 2021 05:36:48 +0000 (21:36 -0800)]
scsi: ufs: ufs-qcom: Disable interrupt in reset path
[ Upstream commit
4a791574a0ccf36eb3a0a46fbd71d2768df3eef9 ]
Disable interrupt in reset path to flush pending IRQ handler in order to
avoid possible NoC issues.
Link: https://lore.kernel.org/r/1614145010-36079-3-git-send-email-cang@codeaurora.org
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Nitin Rawat <nitirawa@codeaurora.org>
Signed-off-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dinghao Liu [Sun, 3 Jan 2021 08:08:42 +0000 (16:08 +0800)]
ixgbe: Fix memleak in ixgbe_configure_clsu32
[ Upstream commit
7a766381634da19fc837619b0a34590498d9d29a ]
When ixgbe_fdir_write_perfect_filter_82599() fails,
input allocated by kzalloc() has not been freed,
which leads to memleak.
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Mark Pearson [Tue, 2 Mar 2021 14:10:03 +0000 (09:10 -0500)]
ALSA: hda: ignore invalid NHLT table
[ Upstream commit
a14a6219996ee6f6e858d83b11affc7907633687 ]
On some Lenovo systems if the microphone is disabled in the BIOS
only the NHLT table header is created, with no data. This means
the endpoints field is not correctly set to zero - leading to an
unintialised variable and hence invalid descriptors are parsed
leading to page faults.
The Lenovo firmware team is addressing this, but adding a check
preventing invalid tables being parsed is worthwhile.
Tested on a Lenovo T14.
Tested-by: Philipp Leskovitz <philipp.leskovitz@secunet.com>
Reported-by: Philipp Leskovitz <philipp.leskovitz@secunet.com>
Signed-off-by: Mark Pearson <markpearson@lenovo.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210302141003.7342-1-markpearson@lenovo.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Hayes Wang [Wed, 3 Mar 2021 08:39:47 +0000 (16:39 +0800)]
Revert "r8152: adjust the settings about MAC clock speed down for RTL8153"
[ Upstream commit
4b5dc1a94d4f92b5845e98bd9ae344b26d933aad ]
This reverts commit
134f98bcf1b898fb9d6f2b91bc85dd2e5478b4b8.
The r8153_mac_clk_spd() is used for RTL8153A only, because the register
table of RTL8153B is different from RTL8153A. However, this function would
be called when RTL8153B calls r8153_first_init() and r8153_enter_oob().
That causes RTL8153B becomes unstable when suspending and resuming. The
worst case may let the device stop working.
Besides, revert this commit to disable MAC clock speed down for RTL8153A.
It would avoid the known issue when enabling U1. The data of the first
control transfer may be wrong when exiting U1.
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Tong Zhang [Sun, 28 Feb 2021 03:55:50 +0000 (22:55 -0500)]
atm: lanai: dont run lanai_dev_close if not open
[ Upstream commit
a2bd45834e83d6c5a04d397bde13d744a4812dfc ]
lanai_dev_open() can fail. When it fail, lanai->base is unmapped and the
pci device is disabled. The caller, lanai_init_one(), then tries to run
atm_dev_deregister(). This will subsequently call lanai_dev_close() and
use the already released MMIO area.
To fix this issue, set the lanai->base to NULL if open fail,
and test the flag in lanai_dev_close().
[ 8.324153] lanai: lanai_start() failed, err=19
[ 8.324819] lanai(itf 0): shutting down interface
[ 8.325211] BUG: unable to handle page fault for address:
ffffc90000180024
[ 8.325781] #PF: supervisor write access in kernel mode
[ 8.326215] #PF: error_code(0x0002) - not-present page
[ 8.326641] PGD
100000067 P4D
100000067 PUD
100139067 PMD
10013a067 PTE 0
[ 8.327206] Oops: 0002 [#1] SMP KASAN NOPTI
[ 8.327557] CPU: 0 PID: 95 Comm: modprobe Not tainted 5.11.0-rc7-00090-gdcc0b49040c7 #12
[ 8.328229] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-48-gd9c812dda519-4
[ 8.329145] RIP: 0010:lanai_dev_close+0x4f/0xe5 [lanai]
[ 8.329587] Code: 00 48 c7 c7 00 d3 01 c0 e8 49 4e 0a c2 48 8d bd 08 02 00 00 e8 6e 52 14 c1 48 80
[ 8.330917] RSP: 0018:
ffff8881029ef680 EFLAGS:
00010246
[ 8.331196] RAX:
000000000003fffe RBX:
ffff888102fb4800 RCX:
ffffffffc001a98a
[ 8.331572] RDX:
ffffc90000180000 RSI:
0000000000000246 RDI:
ffff888102fb4000
[ 8.331948] RBP:
ffff888102fb4000 R08:
ffffffff8115da8a R09:
ffffed102053deaa
[ 8.332326] R10:
0000000000000003 R11:
ffffed102053dea9 R12:
ffff888102fb48a4
[ 8.332701] R13:
ffffffffc00123c0 R14:
ffff888102fb4b90 R15:
ffff888102fb4b88
[ 8.333077] FS:
00007f08eb9056a0(0000) GS:
ffff88815b400000(0000) knlGS:
0000000000000000
[ 8.333502] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 8.333806] CR2:
ffffc90000180024 CR3:
0000000102a28000 CR4:
00000000000006f0
[ 8.334182] DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
[ 8.334557] DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
[ 8.334932] Call Trace:
[ 8.335066] atm_dev_deregister+0x161/0x1a0 [atm]
[ 8.335324] lanai_init_one.cold+0x20c/0x96d [lanai]
[ 8.335594] ? lanai_send+0x2a0/0x2a0 [lanai]
[ 8.335831] local_pci_probe+0x6f/0xb0
[ 8.336039] pci_device_probe+0x171/0x240
[ 8.336255] ? pci_device_remove+0xe0/0xe0
[ 8.336475] ? kernfs_create_link+0xb6/0x110
[ 8.336704] ? sysfs_do_create_link_sd.isra.0+0x76/0xe0
[ 8.336983] really_probe+0x161/0x420
[ 8.337181] driver_probe_device+0x6d/0xd0
[ 8.337401] device_driver_attach+0x82/0x90
[ 8.337626] ? device_driver_attach+0x90/0x90
[ 8.337859] __driver_attach+0x60/0x100
[ 8.338065] ? device_driver_attach+0x90/0x90
[ 8.338298] bus_for_each_dev+0xe1/0x140
[ 8.338511] ? subsys_dev_iter_exit+0x10/0x10
[ 8.338745] ? klist_node_init+0x61/0x80
[ 8.338956] bus_add_driver+0x254/0x2a0
[ 8.339164] driver_register+0xd3/0x150
[ 8.339370] ? 0xffffffffc0028000
[ 8.339550] do_one_initcall+0x84/0x250
[ 8.339755] ? trace_event_raw_event_initcall_finish+0x150/0x150
[ 8.340076] ? free_vmap_area_noflush+0x1a5/0x5c0
[ 8.340329] ? unpoison_range+0xf/0x30
[ 8.340532] ? ____kasan_kmalloc.constprop.0+0x84/0xa0
[ 8.340806] ? unpoison_range+0xf/0x30
[ 8.341014] ? unpoison_range+0xf/0x30
[ 8.341217] do_init_module+0xf8/0x350
[ 8.341419] load_module+0x3fe6/0x4340
[ 8.341621] ? vm_unmap_ram+0x1d0/0x1d0
[ 8.341826] ? ____kasan_kmalloc.constprop.0+0x84/0xa0
[ 8.342101] ? module_frob_arch_sections+0x20/0x20
[ 8.342358] ? __do_sys_finit_module+0x108/0x170
[ 8.342604] __do_sys_finit_module+0x108/0x170
[ 8.342841] ? __ia32_sys_init_module+0x40/0x40
[ 8.343083] ? file_open_root+0x200/0x200
[ 8.343298] ? do_sys_open+0x85/0xe0
[ 8.343491] ? filp_open+0x50/0x50
[ 8.343675] ? exit_to_user_mode_prepare+0xfc/0x130
[ 8.343935] do_syscall_64+0x33/0x40
[ 8.344132] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 8.344401] RIP: 0033:0x7f08eb887cf7
[ 8.344594] Code: 48 89 57 30 48 8b 04 24 48 89 47 38 e9 1d a0 02 00 48 89 f8 48 89 f7 48 89 d6 41
[ 8.345565] RSP: 002b:
00007ffcd5c98ad8 EFLAGS:
00000246 ORIG_RAX:
0000000000000139
[ 8.345962] RAX:
ffffffffffffffda RBX:
00000000008fea70 RCX:
00007f08eb887cf7
[ 8.346336] RDX:
0000000000000000 RSI:
00000000008fd9e0 RDI:
0000000000000003
[ 8.346711] RBP:
0000000000000003 R08:
0000000000000000 R09:
0000000000000001
[ 8.347085] R10:
00007f08eb8eb300 R11:
0000000000000246 R12:
00000000008fd9e0
[ 8.347460] R13:
0000000000000000 R14:
00000000008fddd0 R15:
0000000000000001
[ 8.347836] Modules linked in: lanai(+) atm
[ 8.348065] CR2:
ffffc90000180024
[ 8.348244] ---[ end trace
7fdc1c668f2003e5 ]---
[ 8.348490] RIP: 0010:lanai_dev_close+0x4f/0xe5 [lanai]
[ 8.348772] Code: 00 48 c7 c7 00 d3 01 c0 e8 49 4e 0a c2 48 8d bd 08 02 00 00 e8 6e 52 14 c1 48 80
[ 8.349745] RSP: 0018:
ffff8881029ef680 EFLAGS:
00010246
[ 8.350022] RAX:
000000000003fffe RBX:
ffff888102fb4800 RCX:
ffffffffc001a98a
[ 8.350397] RDX:
ffffc90000180000 RSI:
0000000000000246 RDI:
ffff888102fb4000
[ 8.350772] RBP:
ffff888102fb4000 R08:
ffffffff8115da8a R09:
ffffed102053deaa
[ 8.351151] R10:
0000000000000003 R11:
ffffed102053dea9 R12:
ffff888102fb48a4
[ 8.351525] R13:
ffffffffc00123c0 R14:
ffff888102fb4b90 R15:
ffff888102fb4b88
[ 8.351918] FS:
00007f08eb9056a0(0000) GS:
ffff88815b400000(0000) knlGS:
0000000000000000
[ 8.352343] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 8.352647] CR2:
ffffc90000180024 CR3:
0000000102a28000 CR4:
00000000000006f0
[ 8.353022] DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
[ 8.353397] DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
[ 8.353958] modprobe (95) used greatest stack depth: 26216 bytes left
Signed-off-by: Tong Zhang <ztong0001@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Tong Zhang [Sat, 27 Feb 2021 21:15:06 +0000 (16:15 -0500)]
atm: eni: dont release is never initialized
[ Upstream commit
4deb550bc3b698a1f03d0332cde3df154d1b6c1e ]
label err_eni_release is reachable when eni_start() fail.
In eni_start() it calls dev->phy->start() in the last step, if start()
fail we don't need to call phy->stop(), if start() is never called, we
neither need to call phy->stop(), otherwise null-ptr-deref will happen.
In order to fix this issue, don't call phy->stop() in label err_eni_release
[ 4.875714] ==================================================================
[ 4.876091] BUG: KASAN: null-ptr-deref in suni_stop+0x47/0x100 [suni]
[ 4.876433] Read of size 8 at addr
0000000000000030 by task modprobe/95
[ 4.876778]
[ 4.876862] CPU: 0 PID: 95 Comm: modprobe Not tainted 5.11.0-rc7-00090-gdcc0b49040c7 #2
[ 4.877290] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-48-gd94
[ 4.877876] Call Trace:
[ 4.878009] dump_stack+0x7d/0xa3
[ 4.878191] kasan_report.cold+0x10c/0x10e
[ 4.878410] ? __slab_free+0x2f0/0x340
[ 4.878612] ? suni_stop+0x47/0x100 [suni]
[ 4.878832] suni_stop+0x47/0x100 [suni]
[ 4.879043] eni_do_release+0x3b/0x70 [eni]
[ 4.879269] eni_init_one.cold+0x1152/0x1747 [eni]
[ 4.879528] ? _raw_spin_lock_irqsave+0x7b/0xd0
[ 4.879768] ? eni_ioctl+0x270/0x270 [eni]
[ 4.879990] ? __mutex_lock_slowpath+0x10/0x10
[ 4.880226] ? eni_ioctl+0x270/0x270 [eni]
[ 4.880448] local_pci_probe+0x6f/0xb0
[ 4.880650] pci_device_probe+0x171/0x240
[ 4.880864] ? pci_device_remove+0xe0/0xe0
[ 4.881086] ? kernfs_create_link+0xb6/0x110
[ 4.881315] ? sysfs_do_create_link_sd.isra.0+0x76/0xe0
[ 4.881594] really_probe+0x161/0x420
[ 4.881791] driver_probe_device+0x6d/0xd0
[ 4.882010] device_driver_attach+0x82/0x90
[ 4.882233] ? device_driver_attach+0x90/0x90
[ 4.882465] __driver_attach+0x60/0x100
[ 4.882671] ? device_driver_attach+0x90/0x90
[ 4.882903] bus_for_each_dev+0xe1/0x140
[ 4.883114] ? subsys_dev_iter_exit+0x10/0x10
[ 4.883346] ? klist_node_init+0x61/0x80
[ 4.883557] bus_add_driver+0x254/0x2a0
[ 4.883764] driver_register+0xd3/0x150
[ 4.883971] ? 0xffffffffc0038000
[ 4.884149] do_one_initcall+0x84/0x250
[ 4.884355] ? trace_event_raw_event_initcall_finish+0x150/0x150
[ 4.884674] ? unpoison_range+0xf/0x30
[ 4.884875] ? ____kasan_kmalloc.constprop.0+0x84/0xa0
[ 4.885150] ? unpoison_range+0xf/0x30
[ 4.885352] ? unpoison_range+0xf/0x30
[ 4.885557] do_init_module+0xf8/0x350
[ 4.885760] load_module+0x3fe6/0x4340
[ 4.885960] ? vm_unmap_ram+0x1d0/0x1d0
[ 4.886166] ? ____kasan_kmalloc.constprop.0+0x84/0xa0
[ 4.886441] ? module_frob_arch_sections+0x20/0x20
[ 4.886697] ? __do_sys_finit_module+0x108/0x170
[ 4.886941] __do_sys_finit_module+0x108/0x170
[ 4.887178] ? __ia32_sys_init_module+0x40/0x40
[ 4.887419] ? file_open_root+0x200/0x200
[ 4.887634] ? do_sys_open+0x85/0xe0
[ 4.887826] ? filp_open+0x50/0x50
[ 4.888009] ? fpregs_assert_state_consistent+0x4d/0x60
[ 4.888287] ? exit_to_user_mode_prepare+0x2f/0x130
[ 4.888547] do_syscall_64+0x33/0x40
[ 4.888739] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 4.889010] RIP: 0033:0x7ff62fcf1cf7
[ 4.889202] Code: 48 89 57 30 48 8b 04 24 48 89 47 38 e9 1d a0 02 00 48 89 f8 48 89 f71
[ 4.890172] RSP: 002b:
00007ffe6644ade8 EFLAGS:
00000246 ORIG_RAX:
0000000000000139
[ 4.890570] RAX:
ffffffffffffffda RBX:
0000000000f2ca70 RCX:
00007ff62fcf1cf7
[ 4.890944] RDX:
0000000000000000 RSI:
0000000000f2b9e0 RDI:
0000000000000003
[ 4.891318] RBP:
0000000000000003 R08:
0000000000000000 R09:
0000000000000001
[ 4.891691] R10:
00007ff62fd55300 R11:
0000000000000246 R12:
0000000000f2b9e0
[ 4.892064] R13:
0000000000000000 R14:
0000000000f2bdd0 R15:
0000000000000001
[ 4.892439] ==================================================================
Signed-off-by: Tong Zhang <ztong0001@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Michael Ellerman [Thu, 18 Feb 2021 12:30:58 +0000 (23:30 +1100)]
powerpc/4xx: Fix build errors from mfdcr()
[ Upstream commit
eead089311f4d935ab5d1d8fbb0c42ad44699ada ]
lkp reported a build error in fsp2.o:
CC arch/powerpc/platforms/44x/fsp2.o
{standard input}:577: Error: unsupported relocation against base
Which comes from:
pr_err("GESR0: 0x%08x\n", mfdcr(base + PLB4OPB_GESR0));
Where our mfdcr() macro is stringifying "base + PLB4OPB_GESR0", and
passing that to the assembler, which obviously doesn't work.
The mfdcr() macro already checks that the argument is constant using
__builtin_constant_p(), and if not calls the out-of-line version of
mfdcr(). But in this case GCC is smart enough to notice that "base +
PLB4OPB_GESR0" will be constant, even though it's not something we can
immediately stringify into a register number.
Segher pointed out that passing the register number to the inline asm
as a constant would be better, and in fact it fixes the build error,
presumably because it gives GCC a chance to resolve the value.
While we're at it, change mtdcr() similarly.
Reported-by: kernel test robot <lkp@intel.com>
Suggested-by: Segher Boessenkool <segher@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Acked-by: Feng Tang <feng.tang@intel.com>
Link: https://lore.kernel.org/r/20210218123058.748882-1-mpe@ellerman.id.au
Signed-off-by: Sasha Levin <sashal@kernel.org>
Heiko Thiery [Thu, 25 Feb 2021 21:15:16 +0000 (22:15 +0100)]
net: fec: ptp: avoid register access when ipg clock is disabled
[ Upstream commit
6a4d7234ae9a3bb31181f348ade9bbdb55aeb5c5 ]
When accessing the timecounter register on an i.MX8MQ the kernel hangs.
This is only the case when the interface is down. This can be reproduced
by reading with 'phc_ctrl eth0 get'.
Like described in the change in
91c0d987a9788dcc5fe26baafd73bf9242b68900
the igp clock is disabled when the interface is down and leads to a
system hang.
So we check if the ptp clock status before reading the timecounter
register.
Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Link: https://lore.kernel.org/r/20210225211514.9115-1-heiko.thiery@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Joakim Zhang [Thu, 25 Feb 2021 09:01:12 +0000 (17:01 +0800)]
net: stmmac: fix dma physical address of descriptor when display ring
[ Upstream commit
bfaf91ca848e758ed7be99b61fd936d03819fa56 ]
Driver uses dma_alloc_coherent to allocate dma memory for descriptors,
dma_alloc_coherent will return both the virtual address and physical
address. AFAIK, virt_to_phys could not convert virtual address to
physical address, for which memory is allocated by dma_alloc_coherent.
dwmac4_display_ring() function is broken for various descriptor, it only
support normal descriptor(struct dma_desc) now, this patch also extends to
support all descriptor types.
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Felix Fietkau [Tue, 16 Feb 2021 13:51:18 +0000 (14:51 +0100)]
mt76: fix tx skb error handling in mt76_dma_tx_queue_skb
[ Upstream commit
ae064fc0e32a4d28389086d9f4b260a0c157cfee ]
When running out of room in the tx queue after calling drv->tx_prepare_skb,
the buffer list will already have been modified on MT7615 and newer drivers.
This can leak a DMA mapping and will show up as swiotlb allocation failures
on x86.
Fix this by moving the queue length check further up. This is less accurate,
since it can overestimate the needed room in the queue on MT7615 and newer,
but the difference is small enough to not matter in practice.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210216135119.23809-1-nbd@nbd.name
Signed-off-by: Sasha Levin <sashal@kernel.org>
Zhou Guanghui [Sat, 13 Mar 2021 05:08:33 +0000 (21:08 -0800)]
mm/memcg: set memcg when splitting page
commit
e1baddf8475b06cc56f4bafecf9a32a124343d9f upstream.
As described in the split_page() comment, for the non-compound high order
page, the sub-pages must be freed individually. If the memcg of the first
page is valid, the tail pages cannot be uncharged when be freed.
For example, when alloc_pages_exact is used to allocate 1MB continuous
physical memory, 2MB is charged(kmemcg is enabled and __GFP_ACCOUNT is
set). When make_alloc_exact free the unused 1MB and free_pages_exact free
the applied 1MB, actually, only 4KB(one page) is uncharged.
Therefore, the memcg of the tail page needs to be set when splitting a
page.
Michel:
There are at least two explicit users of __GFP_ACCOUNT with
alloc_exact_pages added recently. See
7efe8ef274024 ("KVM: arm64:
Allocate stage-2 pgd pages with GFP_KERNEL_ACCOUNT") and
c419621873713
("KVM: s390: Add memcg accounting to KVM allocations"), so this is not
just a theoretical issue.
Link: https://lkml.kernel.org/r/20210304074053.65527-3-zhouguanghui1@huawei.com
Signed-off-by: Zhou Guanghui <zhouguanghui1@huawei.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Hanjun Guo <guohanjun@huawei.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Rui Xiang <rui.xiang@huawei.com>
Cc: Tianhong Ding <dingtianhong@huawei.com>
Cc: Weilong Chen <chenweilong@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Zhou Guanghui [Sat, 13 Mar 2021 05:08:30 +0000 (21:08 -0800)]
mm/memcg: rename mem_cgroup_split_huge_fixup to split_page_memcg and add nr_pages argument
commit
be6c8982e4ab9a41907555f601b711a7e2a17d4c upstream.
Rename mem_cgroup_split_huge_fixup to split_page_memcg and explicitly pass
in page number argument.
In this way, the interface name is more common and can be used by
potential users. In addition, the complete info(memcg and flag) of the
memcg needs to be set to the tail pages.
Link: https://lkml.kernel.org/r/20210304074053.65527-2-zhouguanghui1@huawei.com
Signed-off-by: Zhou Guanghui <zhouguanghui1@huawei.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Hanjun Guo <guohanjun@huawei.com>
Cc: Tianhong Ding <dingtianhong@huawei.com>
Cc: Weilong Chen <chenweilong@huawei.com>
Cc: Rui Xiang <rui.xiang@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Thu, 25 Mar 2021 08:04:18 +0000 (09:04 +0100)]
Linux 5.10.26
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Pavel Machek (CIP) <pavel@denx.de>
Tested-by: Hulk Robot <hulkrobot@huawei.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Salvatore Bonaccorso <carnil@debian.org>
Tested-by: Jason Self <jason@bluehome.net>
Link: https://lore.kernel.org/r/20210322121933.746237845@linuxfoundation.org
Link: https://lore.kernel.org/r/20210322151845.637893645@linuxfoundation.org
Link: https://lore.kernel.org/r/20210324093435.962321672@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Vincent Whitchurch [Wed, 10 Mar 2021 12:20:40 +0000 (13:20 +0100)]
cifs: Fix preauth hash corruption
commit
05946d4b7a7349ae58bfa2d51ae832e64a394c2d upstream.
smb311_update_preauth_hash() uses the shash in server->secmech without
appropriate locking, and this can lead to sessions corrupting each
other's preauth hashes.
The following script can easily trigger the problem:
#!/bin/sh -e
NMOUNTS=10
for i in $(seq $NMOUNTS);
mkdir -p /tmp/mnt$i
umount /tmp/mnt$i 2>/dev/null || :
done
while :; do
for i in $(seq $NMOUNTS); do
mount -t cifs //192.168.0.1/test /tmp/mnt$i -o ... &
done
wait
for i in $(seq $NMOUNTS); do
umount /tmp/mnt$i
done
done
Usually within seconds this leads to one or more of the mounts failing
with the following errors, and a "Bad SMB2 signature for message" is
seen in the server logs:
CIFS: VFS: \\192.168.0.1 failed to connect to IPC (rc=-13)
CIFS: VFS: cifs_mount failed w/return code = -13
Fix it by holding the server mutex just like in the other places where
the shashes are used.
Fixes:
8bd68c6e47abff34e4 ("CIFS: implement v3.11 preauth integrity")
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
CC: <stable@vger.kernel.org>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
[aaptel: backport to kernel without CIFS_SESS_OP]
Signed-off-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Johan Hovold [Fri, 12 Mar 2021 09:20:33 +0000 (10:20 +0100)]
x86/apic/of: Fix CPU devicetree-node lookups
commit
dd926880da8dbbe409e709c1d3c1620729a94732 upstream.
Architectures that describe the CPU topology in devicetree and do not have
an identity mapping between physical and logical CPU ids must override the
default implementation of arch_match_cpu_phys_id().
Failing to do so breaks CPU devicetree-node lookups using of_get_cpu_node()
and of_cpu_device_node_get() which several drivers rely on. It also causes
the CPU struct devices exported through sysfs to point to the wrong
devicetree nodes.
On x86, CPUs are described in devicetree using their APIC ids and those
do not generally coincide with the logical ids, even if CPU0 typically
uses APIC id 0.
Add the missing implementation of arch_match_cpu_phys_id() so that CPU-node
lookups work also with SMP.
Apart from fixing the broken sysfs devicetree-node links this likely does
not affect current users of mainline kernels on x86.
Fixes:
4e07db9c8db8 ("x86/devicetree: Use CPU description from Device Tree")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20210312092033.26317-1-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Thomas Gleixner [Wed, 17 Mar 2021 14:38:52 +0000 (15:38 +0100)]
genirq: Disable interrupts for force threaded handlers
commit
81e2073c175b887398e5bca6c004efa89983f58d upstream.
With interrupt force threading all device interrupt handlers are invoked
from kernel threads. Contrary to hard interrupt context the invocation only
disables bottom halfs, but not interrupts. This was an oversight back then
because any code like this will have an issue:
thread(irq_A)
irq_handler(A)
spin_lock(&foo->lock);
interrupt(irq_B)
irq_handler(B)
spin_lock(&foo->lock);
This has been triggered with networking (NAPI vs. hrtimers) and console
drivers where printk() happens from an interrupt which interrupted the
force threaded handler.
Now people noticed and started to change the spin_lock() in the handler to
spin_lock_irqsave() which affects performance or add IRQF_NOTHREAD to the
interrupt request which in turn breaks RT.
Fix the root cause and not the symptom and disable interrupts before
invoking the force threaded handler which preserves the regular semantics
and the usefulness of the interrupt force threading as a general debugging
tool.
For not RT this is not changing much, except that during the execution of
the threaded handler interrupts are delayed until the handler
returns. Vs. scheduling and softirq processing there is no difference.
For RT kernels there is no issue.
Fixes:
8d32a307e4fa ("genirq: Provide forced interrupt threading")
Reported-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Johan Hovold <johan@kernel.org>
Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://lore.kernel.org/r/20210317143859.513307808@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lv Yunlong [Wed, 10 Mar 2021 08:31:27 +0000 (00:31 -0800)]
firmware/efi: Fix a use after bug in efi_mem_reserve_persistent
commit
9ceee7d0841a8f7d7644021ba7d4cc1fbc7966e3 upstream.
In the for loop in efi_mem_reserve_persistent(), prsv = rsv->next
use the unmapped rsv. Use the unmapped pages will cause segment
fault.
Fixes:
18df7577adae6 ("efi/memreserve: deal with memreserve entries in unmapped memory")
Signed-off-by: Lv Yunlong <lyl2019@mail.ustc.edu.cn>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ard Biesheuvel [Wed, 10 Mar 2021 07:33:19 +0000 (08:33 +0100)]
efi: use 32-bit alignment for efi_guid_t literals
commit
fb98cc0b3af2ba4d87301dff2b381b12eee35d7d upstream.
Commit
494c704f9af0 ("efi: Use 32-bit alignment for efi_guid_t") updated
the type definition of efi_guid_t to ensure that it always appears
sufficiently aligned (the UEFI spec is ambiguous about this, but given
the fact that its EFI_GUID type is defined in terms of a struct carrying
a uint32_t, the natural alignment is definitely >= 32 bits).
However, we missed the EFI_GUID() macro which is used to instantiate
efi_guid_t literals: that macro is still based on the guid_t type,
which does not have a minimum alignment at all. This results in warnings
such as
In file included from drivers/firmware/efi/mokvar-table.c:35:
include/linux/efi.h:1093:34: warning: passing 1-byte aligned argument to
4-byte aligned parameter 2 of 'get_var' may result in an unaligned pointer
access [-Walign-mismatch]
status = get_var(L"SecureBoot", &EFI_GLOBAL_VARIABLE_GUID, NULL, &size,
^
include/linux/efi.h:1101:24: warning: passing 1-byte aligned argument to
4-byte aligned parameter 2 of 'get_var' may result in an unaligned pointer
access [-Walign-mismatch]
get_var(L"SetupMode", &EFI_GLOBAL_VARIABLE_GUID, NULL, &size, &setupmode);
The distinction only matters on CPUs that do not support misaligned loads
fully, but 32-bit ARM's load-multiple instructions fall into that category,
and these are likely to be emitted by the compiler that built the firmware
for loading word-aligned 128-bit GUIDs from memory
So re-implement the initializer in terms of our own efi_guid_t type, so that
the alignment becomes a property of the literal's type.
Fixes:
494c704f9af0 ("efi: Use 32-bit alignment for efi_guid_t")
Reported-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Link: https://github.com/ClangBuiltLinux/linux/issues/1327
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Peter Zijlstra [Thu, 18 Mar 2021 10:31:51 +0000 (11:31 +0100)]
static_call: Fix static_call_update() sanity check
commit
38c93587375053c5b9ef093f4a5ea754538cba32 upstream.
Sites that match init_section_contains() get marked as INIT. For
built-in code init_sections contains both __init and __exit text. OTOH
kernel_text_address() only explicitly includes __init text (and there
are no __exit text markers).
Match what jump_label already does and ignore the warning for INIT
sites. Also see the excellent changelog for commit:
8f35eaa5f2de
("jump_label: Don't warn on __exit jump entries")
Fixes:
9183c3f9ed710 ("static_call: Add inline static call infrastructure")
Reported-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Jarkko Sakkinen <jarkko@kernel.org>
Tested-by: Sumit Garg <sumit.garg@linaro.org>
Link: https://lkml.kernel.org/r/20210318113610.739542434@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Tue, 16 Mar 2021 10:23:11 +0000 (11:23 +0100)]
MAINTAINERS: move the staging subsystem to lists.linux.dev
commit
e06da9ea3e3f6746a849edeae1d09ee821f5c2ce upstream.
The drivers/staging/ tree has a new mailing list,
linux-staging@lists.linux.dev, so move the MAINTAINER entry to point to
it so that we get patches sent to the proper place.
There was no need to specify a list for the hikey9xx driver, the tools
pick up the "base" list for drivers/staging/* so remove that line to
make the file simpler.
Cc: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/20210316102311.182375-1-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Sat, 13 Mar 2021 13:58:02 +0000 (14:58 +0100)]
MAINTAINERS: move some real subsystems off of the staging mailing list
commit
f8d70fd6a5a7a38a95eb8021e00d2e547f88efec upstream.
The VME and Android drivers still have their MAINTAINERS entries
pointing to the "driverdevel" mailing list, due to them having their
codebase move out of the drivers/staging/ directory, but no one
remembered to change the mailing list entries.
Move them both to linux-kernel for lack of a more specific place at the
moment. These are both low-volume areas of the kernel, so this
shouldn't be an issue.
Cc: Martyn Welch <martyn@welchs.me.uk>
Cc: Manohar Vanga <manohar.vanga@gmail.com>
Cc: Arve Hjønnevåg <arve@android.com>
Cc: Todd Kjos <tkjos@android.com>
Cc: Martijn Coenen <maco@android.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Christian Brauner <christian@brauner.io>
Cc: Hridya Valsaraju <hridya@google.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Reported-by: Konstantin Ryabitsev <konstantin@linuxfoundation.org>
Link: https://lore.kernel.org/r/YEzE6u6U1jkBatmr@kroah.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Harshad Shirwadkar [Tue, 16 Mar 2021 22:19:21 +0000 (15:19 -0700)]
ext4: fix rename whiteout with fast commit
commit
8210bb29c1b66200cff7b25febcf6e39baf49fbf upstream.
This patch adds rename whiteout support in fast commits. Note that the
whiteout object that gets created is actually char device. Which
imples, the function ext4_inode_journal_mode(struct inode *inode)
would return "JOURNAL_DATA" for this inode. This has a consequence in
fast commit code that it will make creation of the whiteout object a
fast-commit ineligible behavior and thus will fall back to full
commits. With this patch, this can be observed by running fast commits
with rename whiteout and seeing the stats generated by ext4_fc_stats
tracepoint as follows:
ext4_fc_stats: dev 254:32 fc ineligible reasons:
XATTR:0, CROSS_RENAME:0, JOURNAL_FLAG_CHANGE:0, NO_MEM:0, SWAP_BOOT:0,
RESIZE:0, RENAME_DIR:0, FALLOC_RANGE:0, INODE_JOURNAL_DATA:16;
num_commits:6, ineligible: 6, numblks: 3
So in short, this patch guarantees that in case of rename whiteout, we
fall back to full commits.
Amir mentioned that instead of creating a new whiteout object for
every rename, we can create a static whiteout object with irrelevant
nlink. That will make fast commits to not fall back to full
commit. But until this happens, this patch will ensure correctness by
falling back to full commits.
Fixes:
8016e29f4362 ("ext4: fast commit recovery path")
Cc: stable@kernel.org
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20210316221921.1124955-1-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Shijie Luo [Fri, 12 Mar 2021 06:50:51 +0000 (01:50 -0500)]
ext4: fix potential error in ext4_do_update_inode
commit
7d8bd3c76da1d94b85e6c9b7007e20e980bfcfe6 upstream.
If set_large_file = 1 and errors occur in ext4_handle_dirty_metadata(),
the error code will be overridden, go to out_brelse to avoid this
situation.
Signed-off-by: Shijie Luo <luoshijie1@huawei.com>
Link: https://lore.kernel.org/r/20210312065051.36314-1-luoshijie1@huawei.com
Cc: stable@kernel.org
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
zhangyi (F) [Fri, 5 Mar 2021 12:05:08 +0000 (20:05 +0800)]
ext4: do not try to set xattr into ea_inode if value is empty
commit
6b22489911b726eebbf169caee52fea52013fbdd upstream.
Syzbot report a warning that ext4 may create an empty ea_inode if set
an empty extent attribute to a file on the file system which is no free
blocks left.
WARNING: CPU: 6 PID: 10667 at fs/ext4/xattr.c:1640 ext4_xattr_set_entry+0x10f8/0x1114 fs/ext4/xattr.c:1640
...
Call trace:
ext4_xattr_set_entry+0x10f8/0x1114 fs/ext4/xattr.c:1640
ext4_xattr_block_set+0x1d0/0x1b1c fs/ext4/xattr.c:1942
ext4_xattr_set_handle+0x8a0/0xf1c fs/ext4/xattr.c:2390
ext4_xattr_set+0x120/0x1f0 fs/ext4/xattr.c:2491
ext4_xattr_trusted_set+0x48/0x5c fs/ext4/xattr_trusted.c:37
__vfs_setxattr+0x208/0x23c fs/xattr.c:177
...
Now, ext4 try to store extent attribute into an external inode if
ext4_xattr_block_set() return -ENOSPC, but for the case of store an
empty extent attribute, store the extent entry into the extent
attribute block is enough. A simple reproduce below.
fallocate test.img -l 1M
mkfs.ext4 -F -b 2048 -O ea_inode test.img
mount test.img /mnt
dd if=/dev/zero of=/mnt/foo bs=2048 count=500
setfattr -n "user.test" /mnt/foo
Reported-by: syzbot+98b881fdd8ebf45ab4ae@syzkaller.appspotmail.com
Fixes:
9c6e7853c531 ("ext4: reserve space for xattr entries/names")
Cc: stable@kernel.org
Signed-off-by: zhangyi (F) <yi.zhang@huawei.com>
Link: https://lore.kernel.org/r/20210305120508.298465-1-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pan Bian [Sun, 17 Jan 2021 08:57:32 +0000 (00:57 -0800)]
ext4: stop inode update before return
commit
512c15ef05d73a04f1aef18a3bc61a8bb516f323 upstream.
The inode update should be stopped before returing the error code.
Signed-off-by: Pan Bian <bianpan2016@163.com>
Link: https://lore.kernel.org/r/20210117085732.93788-1-bianpan2016@163.com
Fixes:
8016e29f4362 ("ext4: fast commit recovery path")
Cc: stable@kernel.org
Reviewed-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
zhangyi (F) [Wed, 3 Mar 2021 13:17:02 +0000 (21:17 +0800)]
ext4: find old entry again if failed to rename whiteout
commit
b7ff91fd030dc9d72ed91b1aab36e445a003af4f upstream.
If we failed to add new entry on rename whiteout, we cannot reset the
old->de entry directly, because the old->de could have moved from under
us during make indexed dir. So find the old entry again before reset is
needed, otherwise it may corrupt the filesystem as below.
/dev/sda: Entry '
00000001' in ??? (12) has deleted/unused inode 15. CLEARED.
/dev/sda: Unattached inode 75
/dev/sda: UNEXPECTED INCONSISTENCY; RUN fsck MANUALLY.
Fixes:
6b4b8e6b4ad ("ext4: fix bug for rename with RENAME_WHITEOUT")
Cc: stable@vger.kernel.org
Signed-off-by: zhangyi (F) <yi.zhang@huawei.com>
Link: https://lore.kernel.org/r/20210303131703.330415-1-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Biggers [Tue, 2 Mar 2021 20:04:19 +0000 (12:04 -0800)]
ext4: fix error handling in ext4_end_enable_verity()
commit
f053cf7aa66cd9d592b0fc967f4d887c2abff1b7 upstream.
ext4 didn't properly clean up if verity failed to be enabled on a file:
- It left verity metadata (pages past EOF) in the page cache, which
would be exposed to userspace if the file was later extended.
- It didn't truncate the verity metadata at all (either from cache or
from disk) if an error occurred while setting the verity bit.
Fix these bugs by adding a call to truncate_inode_pages() and ensuring
that we truncate the verity metadata (both from cache and from disk) in
all error paths. Also rework the code to cleanly separate the success
path from the error paths, which makes it much easier to understand.
Reported-by: Yunlei He <heyunlei@hihonor.com>
Fixes:
c93d8f885809 ("ext4: add basic fs-verity support")
Cc: stable@vger.kernel.org # v5.4+
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20210302200420.137977-2-ebiggers@kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Shawn Guo [Wed, 17 Mar 2021 06:36:06 +0000 (14:36 +0800)]
efivars: respect EFI_UNSUPPORTED return from firmware
commit
483028edacab374060d93955382b4865a9e07cba upstream.
As per UEFI spec 2.8B section 8.2, EFI_UNSUPPORTED may be returned by
EFI variable runtime services if no variable storage is supported by
firmware. In this case, there is no point for kernel to continue
efivars initialization. That said, efivar_init() should fail by
returning an error code, so that efivarfs will not be mounted on
/sys/firmware/efi/efivars at all. Otherwise, user space like efibootmgr
will be confused by the EFIVARFS_MAGIC seen there, while EFI variable
calls cannot be made successfully.
Cc: <stable@vger.kernel.org> # v5.10+
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Oleg Nesterov [Mon, 1 Feb 2021 17:47:09 +0000 (18:47 +0100)]
x86: Introduce TS_COMPAT_RESTART to fix get_nr_restart_syscall()
commit
8c150ba2fb5995c84a7a43848250d444a3329a7d upstream.
The comment in get_nr_restart_syscall() says:
* The problem is that we can get here when ptrace pokes
* syscall-like values into regs even if we're not in a syscall
* at all.
Yes, but if not in a syscall then the
status & (TS_COMPAT|TS_I386_REGS_POKED)
check below can't really help:
- TS_COMPAT can't be set
- TS_I386_REGS_POKED is only set if regs->orig_ax was changed by
32bit debugger; and even in this case get_nr_restart_syscall()
is only correct if the tracee is 32bit too.
Suppose that a 64bit debugger plays with a 32bit tracee and
* Tracee calls sleep(2) // TS_COMPAT is set
* User interrupts the tracee by CTRL-C after 1 sec and does
"(gdb) call func()"
* gdb saves the regs by PTRACE_GETREGS
* does PTRACE_SETREGS to set %rip='func' and %orig_rax=-1
* PTRACE_CONT // TS_COMPAT is cleared
* func() hits int3.
* Debugger catches SIGTRAP.
* Restore original regs by PTRACE_SETREGS.
* PTRACE_CONT
get_nr_restart_syscall() wrongly returns __NR_restart_syscall==219, the
tracee calls ia32_sys_call_table[219] == sys_madvise.
Add the sticky TS_COMPAT_RESTART flag which survives after return to user
mode. It's going to be removed in the next step again by storing the
information in the restart block. As a further cleanup it might be possible
to remove also TS_I386_REGS_POKED with that.
Test-case:
$ cvs -d :pserver:anoncvs:anoncvs@sourceware.org:/cvs/systemtap co ptrace-tests
$ gcc -o erestartsys-trap-debuggee ptrace-tests/tests/erestartsys-trap-debuggee.c --m32
$ gcc -o erestartsys-trap-debugger ptrace-tests/tests/erestartsys-trap-debugger.c -lutil
$ ./erestartsys-trap-debugger
Unexpected: retval 1, errno 22
erestartsys-trap-debugger: ptrace-tests/tests/erestartsys-trap-debugger.c:421
Fixes:
609c19a385c8 ("x86/ptrace: Stop setting TS_COMPAT in ptrace code")
Reported-by: Jan Kratochvil <jan.kratochvil@redhat.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210201174709.GA17895@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Oleg Nesterov [Mon, 1 Feb 2021 17:46:49 +0000 (18:46 +0100)]
x86: Move TS_COMPAT back to asm/thread_info.h
commit
66c1b6d74cd7035e85c426f0af4aede19e805c8a upstream.
Move TS_COMPAT back to asm/thread_info.h, close to TS_I386_REGS_POKED.
It was moved to asm/processor.h by
b9d989c7218a ("x86/asm: Move the
thread_info::status field to thread_struct"), then later
37a8f7c38339
("x86/asm: Move 'status' from thread_struct to thread_info") moved the
'status' field back but TS_COMPAT was forgotten.
Preparatory patch to fix the COMPAT case for get_nr_restart_syscall()
Fixes:
609c19a385c8 ("x86/ptrace: Stop setting TS_COMPAT in ptrace code")
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210201174649.GA17880@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Oleg Nesterov [Mon, 1 Feb 2021 17:46:41 +0000 (18:46 +0100)]
kernel, fs: Introduce and use set_restart_fn() and arch_set_restart_data()
commit
5abbe51a526253b9f003e9a0a195638dc882d660 upstream.
Preparation for fixing get_nr_restart_syscall() on X86 for COMPAT.
Add a new helper which sets restart_block->fn and calls a dummy
arch_set_restart_data() helper.
Fixes:
609c19a385c8 ("x86/ptrace: Stop setting TS_COMPAT in ptrace code")
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210201174641.GA17871@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Thomas Gleixner [Thu, 18 Mar 2021 19:26:47 +0000 (20:26 +0100)]
x86/ioapic: Ignore IRQ2 again
commit
a501b048a95b79e1e34f03cac3c87ff1e9f229ad upstream.
Vitaly ran into an issue with hotplugging CPU0 on an Amazon instance where
the matrix allocator claimed to be out of vectors. He analyzed it down to
the point that IRQ2, the PIC cascade interrupt, which is supposed to be not
ever routed to the IO/APIC ended up having an interrupt vector assigned
which got moved during unplug of CPU0.
The underlying issue is that IRQ2 for various reasons (see commit
af174783b925 ("x86: I/O APIC: Never configure IRQ2" for details) is treated
as a reserved system vector by the vector core code and is not accounted as
a regular vector. The Amazon BIOS has an routing entry of pin2 to IRQ2
which causes the IO/APIC setup to claim that interrupt which is granted by
the vector domain because there is no sanity check. As a consequence the
allocation counter of CPU0 underflows which causes a subsequent unplug to
fail with:
[ ... ] CPU 0 has
4294967295 vectors, 589 available. Cannot disable CPU
There is another sanity check missing in the matrix allocator, but the
underlying root cause is that the IO/APIC code lost the IRQ2 ignore logic
during the conversion to irqdomains.
For almost 6 years nobody complained about this wreckage, which might
indicate that this requirement could be lifted, but for any system which
actually has a PIC IRQ2 is unusable by design so any routing entry has no
effect and the interrupt cannot be connected to a device anyway.
Due to that and due to history biased paranoia reasons restore the IRQ2
ignore logic and treat it as non existent despite a routing entry claiming
otherwise.
Fixes:
d32932d02e18 ("x86/irq: Convert IOAPIC to use hierarchical irqdomain interfaces")
Reported-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210318192819.636943062@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kan Liang [Fri, 12 Mar 2021 13:21:38 +0000 (05:21 -0800)]
perf/x86/intel: Fix unchecked MSR access error caused by VLBR_EVENT
commit
2dc0572f2cef87425147658698dce2600b799bd3 upstream.
On a Haswell machine, the perf_fuzzer managed to trigger this message:
[117248.075892] unchecked MSR access error: WRMSR to 0x3f1 (tried to
write 0x0400000000000000) at rIP: 0xffffffff8106e4f4
(native_write_msr+0x4/0x20)
[117248.089957] Call Trace:
[117248.092685] intel_pmu_pebs_enable_all+0x31/0x40
[117248.097737] intel_pmu_enable_all+0xa/0x10
[117248.102210] __perf_event_task_sched_in+0x2df/0x2f0
[117248.107511] finish_task_switch.isra.0+0x15f/0x280
[117248.112765] schedule_tail+0xc/0x40
[117248.116562] ret_from_fork+0x8/0x30
A fake event called VLBR_EVENT may use the bit 58 of the PEBS_ENABLE, if
the precise_ip is set. The bit 58 is reserved by the HW. Accessing the
bit causes the unchecked MSR access error.
The fake event doesn't support PEBS. The case should be rejected.
Fixes:
097e4311cda9 ("perf/x86: Add constraint to create guest LBR event without hw counter")
Reported-by: Vince Weaver <vincent.weaver@maine.edu>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/1615555298-140216-2-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kan Liang [Fri, 12 Mar 2021 13:21:37 +0000 (05:21 -0800)]
perf/x86/intel: Fix a crash caused by zero PEBS status
commit
d88d05a9e0b6d9356e97129d4ff9942d765f46ea upstream.
A repeatable crash can be triggered by the perf_fuzzer on some Haswell
system.
https://lore.kernel.org/lkml/7170d3b-c17f-1ded-52aa-
cc6d9ae999f4@maine.edu/
For some old CPUs (HSW and earlier), the PEBS status in a PEBS record
may be mistakenly set to 0. To minimize the impact of the defect, the
commit was introduced to try to avoid dropping the PEBS record for some
cases. It adds a check in the intel_pmu_drain_pebs_nhm(), and updates
the local pebs_status accordingly. However, it doesn't correct the PEBS
status in the PEBS record, which may trigger the crash, especially for
the large PEBS.
It's possible that all the PEBS records in a large PEBS have the PEBS
status 0. If so, the first get_next_pebs_record_by_bit() in the
__intel_pmu_pebs_event() returns NULL. The at = NULL. Since it's a large
PEBS, the 'count' parameter must > 1. The second
get_next_pebs_record_by_bit() will crash.
Besides the local pebs_status, correct the PEBS status in the PEBS
record as well.
Fixes:
01330d7288e0 ("perf/x86: Allow zero PEBS status with only single active event")
Reported-by: Vince Weaver <vincent.weaver@maine.edu>
Suggested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/1615555298-140216-1-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tyrel Datwyler [Mon, 15 Mar 2021 21:48:21 +0000 (15:48 -0600)]
PCI: rpadlpar: Fix potential drc_name corruption in store functions
commit
cc7a0bb058b85ea03db87169c60c7cfdd5d34678 upstream.
Both add_slot_store() and remove_slot_store() try to fix up the
drc_name copied from the store buffer by placing a NUL terminator at
nbyte + 1 or in place of a '\n' if present. However, the static buffer
that we copy the drc_name data into is not zeroed and can contain
anything past the n-th byte.
This is problematic if a '\n' byte appears in that buffer after nbytes
and the string copied into the store buffer was not NUL terminated to
start with as the strchr() search for a '\n' byte will mark this
incorrectly as the end of the drc_name string resulting in a drc_name
string that contains garbage data after the n-th byte.
Additionally it will cause us to overwrite that '\n' byte on the stack
with NUL, potentially corrupting data on the stack.
The following debugging shows an example of the drmgr utility writing
"PHB 4543" to the add_slot sysfs attribute, but add_slot_store()
logging a corrupted string value.
drmgr: drmgr: -c phb -a -s PHB 4543 -d 1
add_slot_store: drc_name = PHB 4543°|<82>!, rc = -19
Fix this by using strscpy() instead of memcpy() to ensure the string
is NUL terminated when copied into the static drc_name buffer.
Further, since the string is now NUL terminated the code only needs to
change '\n' to '\0' when present.
Cc: stable@vger.kernel.org
Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
[mpe: Reformat change log and add mention of possible stack corruption]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210315214821.452959-1-tyreld@linux.ibm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fabrice Gasnier [Wed, 3 Mar 2021 17:49:49 +0000 (18:49 +0100)]
counter: stm32-timer-cnt: fix ceiling miss-alignment with reload register
commit
b14d72ac731753708a7c1a6b3657b9312b6f0042 upstream.
Ceiling value may be miss-aligned with what's actually configured into the
ARR register. This is seen after probe as currently the ARR value is zero,
whereas ceiling value is set to the maximum. So:
- reading ceiling reports zero
- in case the counter gets enabled without any prior configuration,
it won't count.
- in case the function gets set by the user 1st, (priv->ceiling) is used.
Fix it by getting rid of the cached "priv->ceiling" variable. Rather use
the ARR register value directly by using regmap read or write when needed.
There should be no drawback on performance as priv->ceiling isn't used in
performance critical path.
There's also no point in writing ARR while setting function (sms), so
it can be safely removed.
Fixes:
ad29937e206f ("counter: Add STM32 Timer quadrature encoder")
Suggested-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Acked-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Cc: <Stable@vger.kernel.org>
Link: https://lore.kernel.org/r/1614793789-10346-1-git-send-email-fabrice.gasnier@foss.st.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fabrice Gasnier [Tue, 2 Mar 2021 14:43:55 +0000 (15:43 +0100)]
counter: stm32-timer-cnt: fix ceiling write max value
commit
e4c3e133294c0a292d21073899b05ebf530169bd upstream.
The ceiling value isn't checked before writing it into registers. The user
could write a value higher than the counter resolution (e.g. 16 or 32 bits
indicated by max_arr). This makes most significant bits to be truncated.
Fix it by checking the max_arr to report a range error [1] to the user.
[1] https://lkml.org/lkml/2021/2/12/358
Fixes:
ad29937e206f ("counter: Add STM32 Timer quadrature encoder")
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Acked-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Cc: <Stable@vger.kernel.org>
Link: https://lore.kernel.org/r/1614696235-24088-1-git-send-email-fabrice.gasnier@foss.st.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ye Xiang [Wed, 3 Mar 2021 06:36:14 +0000 (14:36 +0800)]
iio: hid-sensor-temperature: Fix issues of timestamp channel
commit
141e7633aa4d2838d1f6ad5c74cccc53547c16ac upstream.
This patch fixes 2 issues of timestamp channel:
1. This patch ensures that there is sufficient space and correct
alignment for the timestamp.
2. Correct the timestamp channel scan index.
Fixes:
59d0f2da3569 ("iio: hid: Add temperature sensor support")
Signed-off-by: Ye Xiang <xiang.ye@intel.com>
Cc: <Stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210303063615.12130-4-xiang.ye@intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ye Xiang [Sat, 30 Jan 2021 10:25:30 +0000 (18:25 +0800)]
iio: hid-sensor-prox: Fix scale not correct issue
commit
d68c592e02f6f49a88e705f13dfc1883432cf300 upstream.
Currently, the proxy sensor scale is zero because it just return the
exponent directly. To fix this issue, this patch use
hid_sensor_format_scale to process the scale first then return the
output.
Fixes:
39a3a0138f61 ("iio: hid-sensors: Added Proximity Sensor Driver")
Signed-off-by: Ye Xiang <xiang.ye@intel.com>
Link: https://lore.kernel.org/r/20210130102530.31064-1-xiang.ye@intel.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ye Xiang [Wed, 3 Mar 2021 06:36:12 +0000 (14:36 +0800)]
iio: hid-sensor-humidity: Fix alignment issue of timestamp channel
commit
37e89e574dc238a4ebe439543c5ab4fbb2f0311b upstream.
This patch ensures that, there is sufficient space and correct
alignment for the timestamp.
Fixes:
d7ed89d5aadf ("iio: hid: Add humidity sensor support")
Signed-off-by: Ye Xiang <xiang.ye@intel.com>
Cc: <Stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210303063615.12130-2-xiang.ye@intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alexandru Ardelean [Wed, 10 Feb 2021 10:50:44 +0000 (12:50 +0200)]
iio: adc: adi-axi-adc: add proper Kconfig dependencies
commit
be24c65e9fa2486bb8ec98d9f592bdcf04bedd88 upstream.
The ADI AXI ADC driver requires IO mem access and OF to work. This change
adds these dependencies to the Kconfig symbol of the driver.
This was also found via the lkp bot, as the
devm_platform_ioremap_resource() symbol was not found at link-time on the
S390 architecture.
Fixes:
ef04070692a21 ("iio: adc: adi-axi-adc: add support for AXI ADC IP core")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Cc: <Stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210210105044.48914-1-alexandru.ardelean@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Wilfried Wessner [Mon, 8 Feb 2021 14:27:05 +0000 (15:27 +0100)]
iio: adc: ad7949: fix wrong ADC result due to incorrect bit mask
commit
f890987fac8153227258121740a9609668c427f3 upstream.
Fixes a wrong bit mask used for the ADC's result, which was caused by an
improper usage of the GENMASK() macro. The bits higher than ADC's
resolution are undefined and if not masked out correctly, a wrong result
can be given. The GENMASK() macro indexing is zero based, so the mask has
to go from [resolution - 1 , 0].
Fixes:
7f40e0614317f ("iio:adc:ad7949: Add AD7949 ADC driver family")
Signed-off-by: Wilfried Wessner <wilfried.wessner@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Charles-Antoine Couret <charles-antoine.couret@essensium.com>
Cc: <Stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210208142705.GA51260@ubuntu
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Linus Walleij [Thu, 24 Dec 2020 01:17:00 +0000 (02:17 +0100)]
iio: adc: ab8500-gpadc: Fix off by 10 to 3
commit
4f5434086d9223f20b3128a7dc78b35271e76655 upstream.
Fix an off by three orders of magnitude error in the AB8500
GPADC driver. Luckily it showed up quite quickly when trying
to make use of it. The processed reads were returning
microvolts, microamperes and microcelsius instead of millivolts,
milliamperes and millicelsius as advertised.
Cc: stable@vger.kernel.org
Fixes:
07063bbfa98e ("iio: adc: New driver for the AB8500 GPADC")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20201224011700.1059659-1-linus.walleij@linaro.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dinghao Liu [Mon, 1 Mar 2021 08:04:21 +0000 (16:04 +0800)]
iio: gyro: mpu3050: Fix error handling in mpu3050_trigger_handler
commit
6dbbbe4cfd398704b72b21c1d4a5d3807e909d60 upstream.
There is one regmap_bulk_read() call in mpu3050_trigger_handler
that we have caught its return value bug lack further handling.
Check and terminate the execution flow just like the other three
regmap_bulk_read() calls in this function.
Fixes:
3904b28efb2c7 ("iio: gyro: Add driver for the MPU-3050 gyroscope")
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20210301080421.13436-1-dinghao.liu@zju.edu.cn
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dan Carpenter [Tue, 16 Feb 2021 19:42:13 +0000 (22:42 +0300)]
iio: adis16400: Fix an error code in adis16400_initial_setup()
commit
a71266e454b5df10d019b06f5ebacd579f76be28 upstream.
This is to silence a new Smatch warning:
drivers/iio/imu/adis16400.c:492 adis16400_initial_setup()
warn: sscanf doesn't return error codes
If the condition "if (st->variant->flags & ADIS16400_HAS_SLOW_MODE) {"
is false then we return 1 instead of returning 0 and probe will fail.
Fixes:
72a868b38bdd ("iio: imu: check sscanf return value")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: <Stable@vger.kernel.org>
Link: https://lore.kernel.org/r/YCwgFb3JVG6qrlQ+@mwanda
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jonathan Albrieux [Wed, 13 Jan 2021 15:18:07 +0000 (16:18 +0100)]
iio:adc:qcom-spmi-vadc: add default scale to LR_MUX2_BAT_ID channel
commit
7d200b283aa049fcda0d43dd6e03e9e783d2799c upstream.
Checking at both msm8909-pm8916.dtsi and msm8916.dtsi from downstream
it is indicated that "batt_id" channel has to be scaled with the default
function:
chan@31 {
label = "batt_id";
reg = <0x31>;
qcom,decimation = <0>;
qcom,pre-div-channel-scaling = <0>;
qcom,calibration-type = "ratiometric";
qcom,scale-function = <0>;
qcom,hw-settle-time = <0xb>;
qcom,fast-avg-setup = <0>;
};
Change LR_MUX2_BAT_ID scaling accordingly.
Signed-off-by: Jonathan Albrieux <jonathan.albrieux@gmail.com>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Fixes:
7c271eea7b8a ("iio: adc: spmi-vadc: Changes to support different scaling")
Link: https://lore.kernel.org/r/20210113151808.4628-2-jonathan.albrieux@gmail.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jonathan Cameron [Sun, 24 Jan 2021 19:50:34 +0000 (19:50 +0000)]
iio:adc:stm32-adc: Add HAS_IOMEM dependency
commit
121875b28e3bd7519a675bf8ea2c2e793452c2bd upstream.
Seems that there are config combinations in which this driver gets enabled
and hence selects the MFD, but with out HAS_IOMEM getting pulled in
via some other route. MFD is entirely contained in an
if HAS_IOMEM block, leading to the build issue in this bugzilla.
https://bugzilla.kernel.org/show_bug.cgi?id=209889
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20210124195034.22576-1-jic23@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mika Westerberg [Thu, 10 Dec 2020 12:57:10 +0000 (14:57 +0200)]
thunderbolt: Increase runtime PM reference count on DP tunnel discovery
commit
c94732bda079ee66b5c3904cbb628d0cb218ab39 upstream.
If the driver is unbound and then bound back it goes over the topology
and figure out the existing tunnels. However, if it finds DP tunnel it
should make sure the domain does not runtime suspend as otherwise it
will tear down the DP tunnel unexpectedly.
Fixes:
6ac6faee5d7d ("thunderbolt: Add runtime PM for Software CM")
Cc: stable@vger.kernel.org
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mika Westerberg [Wed, 10 Feb 2021 14:06:33 +0000 (16:06 +0200)]
thunderbolt: Initialize HopID IDAs in tb_switch_alloc()
commit
781e14eaa7d168dc07d2a2eea5c55831a5bb46f3 upstream.
If there is a failure before the tb_switch_add() is called the switch
object is released by tb_switch_release() but at that point HopID IDAs
have not yet been initialized. So we see splat like this:
BUG: spinlock bad magic on CPU#2, kworker/u8:5/115
...
Workqueue: thunderbolt0 tb_handle_hotplug
Call Trace:
dump_stack+0x97/0xdc
? spin_bug+0x9a/0xa7
do_raw_spin_lock+0x68/0x98
_raw_spin_lock_irqsave+0x3f/0x5d
ida_destroy+0x4f/0x127
tb_switch_release+0x6d/0xfd
device_release+0x2c/0x7d
kobject_put+0x9b/0xbc
tb_handle_hotplug+0x278/0x452
process_one_work+0x1db/0x396
worker_thread+0x216/0x375
kthread+0x14d/0x155
? pr_cont_work+0x58/0x58
? kthread_blkcg+0x2e/0x2e
ret_from_fork+0x1f/0x40
Fix this by always initializing HopID IDAs in tb_switch_alloc().
Fixes:
0b2863ac3cfd ("thunderbolt: Add functions for allocating and releasing HopIDs")
Cc: stable@vger.kernel.org
Reported-by: Chiranjeevi Rapolu <chiranjeevi.rapolu@intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Wesley Cheng [Thu, 11 Mar 2021 23:59:02 +0000 (15:59 -0800)]
usb: dwc3: gadget: Prevent EP queuing while stopping transfers
commit
f09ddcfcb8c569675066337adac2ac205113471f upstream.
In the situations where the DWC3 gadget stops active transfers, once
calling the dwc3_gadget_giveback(), there is a chance where a function
driver can queue a new USB request in between the time where the dwc3
lock has been released and re-aquired. This occurs after we've already
issued an ENDXFER command. When the stop active transfers continues
to remove USB requests from all dep lists, the newly added request will
also be removed, while controller still has an active TRB for it.
This can lead to the controller accessing an unmapped memory address.
Fix this by ensuring parameters to prevent EP queuing are set before
calling the stop active transfers API.
Fixes:
ae7e86108b12 ("usb: dwc3: Stop active transfers before halting the controller")
Signed-off-by: Wesley Cheng <wcheng@codeaurora.org>
Link: https://lore.kernel.org/r/1615507142-23097-1-git-send-email-wcheng@codeaurora.org
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Wesley Cheng [Tue, 29 Dec 2020 23:05:35 +0000 (15:05 -0800)]
usb: dwc3: gadget: Allow runtime suspend if UDC unbinded
commit
77adb8bdf4227257e26b7ff67272678e66a0b250 upstream.
The DWC3 runtime suspend routine checks for the USB connected parameter to
determine if the controller can enter into a low power state. The
connected state is only set to false after receiving a disconnect event.
However, in the case of a device initiated disconnect (i.e. UDC unbind),
the controller is halted and a disconnect event is never generated. Set
the connected flag to false if issuing a device initiated disconnect to
allow the controller to be suspended.
Signed-off-by: Wesley Cheng <wcheng@codeaurora.org>
Link: https://lore.kernel.org/r/1609283136-22140-2-git-send-email-wcheng@codeaurora.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Badhri Jagan Sridharan [Wed, 17 Mar 2021 18:12:48 +0000 (11:12 -0700)]
usb: typec: tcpm: Invoke power_supply_changed for tcpm-source-psy-
commit
86629e098a077922438efa98dc80917604dfd317 upstream.
tcpm-source-psy- does not invoke power_supply_changed API when
one of the published power supply properties is changed.
power_supply_changed needs to be called to notify
userspace clients(uevents) and kernel clients.
Fixes:
f2a8aa053c176 ("typec: tcpm: Represent source supply through power_supply")
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Badhri Jagan Sridharan <badhri@google.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210317181249.1062995-1-badhri@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Elias Rudberg [Thu, 11 Mar 2021 12:47:10 +0000 (13:47 +0100)]
usb: typec: Remove vdo[3] part of tps6598x_rx_identity_reg struct
commit
3cac9104bea41099cf622091f0c0538bcb19050d upstream.
Remove the unused "u32 vdo[3]" part in the tps6598x_rx_identity_reg
struct. This helps avoid "failed to register partner" errors which
happen when tps6598x_read_partner_identity() fails because the
amount of data read is 12 bytes smaller than the struct size.
Note that vdo[3] is already in usb_pd_identity and hence
shouldn't be added to tps6598x_rx_identity_reg as well.
Fixes:
f6c56ca91b92 ("usb: typec: Add the Product Type VDOs to struct usb_pd_identity")
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Elias Rudberg <mail@eliasrudberg.se>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210311124710.6563-1-mail@eliasrudberg.se
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jim Lin [Thu, 11 Mar 2021 06:42:41 +0000 (14:42 +0800)]
usb: gadget: configfs: Fix KASAN use-after-free
commit
98f153a10da403ddd5e9d98a3c8c2bb54bb5a0b6 upstream.
When gadget is disconnected, running sequence is like this.
. composite_disconnect
. Call trace:
usb_string_copy+0xd0/0x128
gadget_config_name_configuration_store+0x4
gadget_config_name_attr_store+0x40/0x50
configfs_write_file+0x198/0x1f4
vfs_write+0x100/0x220
SyS_write+0x58/0xa8
. configfs_composite_unbind
. configfs_composite_bind
In configfs_composite_bind, it has
"cn->strings.s = cn->configuration;"
When usb_string_copy is invoked. it would
allocate memory, copy input string, release previous pointed memory space,
and use new allocated memory.
When gadget is connected, host sends down request to get information.
Call trace:
usb_gadget_get_string+0xec/0x168
lookup_string+0x64/0x98
composite_setup+0xa34/0x1ee8
If gadget is disconnected and connected quickly, in the failed case,
cn->configuration memory has been released by usb_string_copy kfree but
configfs_composite_bind hasn't been run in time to assign new allocated
"cn->configuration" pointer to "cn->strings.s".
When "strlen(s->s) of usb_gadget_get_string is being executed, the dangling
memory is accessed, "BUG: KASAN: use-after-free" error occurs.
Cc: stable@vger.kernel.org
Signed-off-by: Jim Lin <jilin@nvidia.com>
Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com>
Link: https://lore.kernel.org/r/1615444961-13376-1-git-send-email-macpaul.lin@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Colin Ian King [Thu, 11 Mar 2021 10:44:45 +0000 (10:44 +0000)]
usbip: Fix incorrect double assignment to udc->ud.tcp_rx
commit
9858af27e69247c5d04c3b093190a93ca365f33d upstream.
Currently udc->ud.tcp_rx is being assigned twice, the second assignment
is incorrect, it should be to udc->ud.tcp_tx instead of rx. Fix this.
Fixes:
46613c9dfa96 ("usbip: fix vudc usbip_sockfd_store races leading to gpf")
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Cc: stable <stable@vger.kernel.org>
Addresses-Coverity: ("Unused value")
Link: https://lore.kernel.org/r/20210311104445.7811-1-colin.king@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alan Stern [Wed, 17 Mar 2021 19:06:54 +0000 (15:06 -0400)]
usb-storage: Add quirk to defeat Kindle's automatic unload
commit
546aa0e4ea6ed81b6c51baeebc4364542fa3f3a7 upstream.
Matthias reports that the Amazon Kindle automatically removes its
emulated media if it doesn't receive another SCSI command within about
one second after a SYNCHRONIZE CACHE. It does so even when the host
has sent a PREVENT MEDIUM REMOVAL command. The reason for this
behavior isn't clear, although it's not hard to make some guesses.
At any rate, the results can be unexpected for anyone who tries to
access the Kindle in an unusual fashion, and in theory they can lead
to data loss (for example, if one file is closed and synchronized
while other files are still in the middle of being written).
To avoid such problems, this patch creates a new usb-storage quirks
flag telling the driver always to issue a REQUEST SENSE following a
SYNCHRONIZE CACHE command, and adds an unusual_devs entry for the
Kindle with the flag set. This is sufficient to prevent the Kindle
from doing its automatic unload, without interfering with proper
operation.
Another possible way to deal with this would be to increase the
frequency of TEST UNIT READY polling that the kernel normally carries
out for removable-media storage devices. However that would increase
the overall load on the system and it is not as reliable, because the
user can override the polling interval. Changing the driver's
behavior is safer and has minimal overhead.
CC: <stable@vger.kernel.org>
Reported-and-tested-by: Matthias Schwarzott <zzam@gentoo.org>
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20210317190654.GA497856@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Christophe Leroy [Wed, 10 Mar 2021 12:10:34 +0000 (12:10 +0000)]
powerpc: Force inlining of cpu_has_feature() to avoid build failure
commit
eed5fae00593ab9d261a0c1ffc1bdb786a87a55a upstream.
The code relies on constant folding of cpu_has_feature() based
on possible and always true values as defined per
CPU_FTRS_ALWAYS and CPU_FTRS_POSSIBLE.
Build failure is encountered with for instance
book3e_all_defconfig on kisskb in the AMDGPU driver which uses
cpu_has_feature(CPU_FTR_VSX_COMP) to decide whether calling
kernel_enable_vsx() or not.
The failure is due to cpu_has_feature() not being inlined with
that configuration with gcc 4.9.
In the same way as commit
acdad8fb4a15 ("powerpc: Force inlining of
mmu_has_feature to fix build failure"), for inlining of
cpu_has_feature().
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/b231dfa040ce4cc37f702f5c3a595fdeabfe0462.1615378209.git.christophe.leroy@csgroup.eu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bob Peterson [Fri, 12 Mar 2021 12:58:54 +0000 (07:58 -0500)]
gfs2: bypass signal_our_withdraw if no journal
[ Upstream commit
d5bf630f355d8c532bef2347cf90e8ae60a5f1bd ]
Before this patch, function signal_our_withdraw referenced the journal
inode immediately. But corrupt file systems may have some invalid
journals, in which case our attempt to read it in will withdraw and the
resulting signal_our_withdraw would dereference the NULL value.
This patch adds a check to signal_our_withdraw so that if the journal
has not yet been initialized, it simply returns and does the old-style
withdraw.
Thanks, Andy Price, for his analysis.
Reported-by: syzbot+50a8a9cf8127f2c6f5df@syzkaller.appspotmail.com
Fixes:
601ef0d52e96 ("gfs2: Force withdraw to replay journals and wait for it to finish")
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Bob Peterson [Tue, 22 Dec 2020 20:43:28 +0000 (14:43 -0600)]
gfs2: move freeze glock outside the make_fs_rw and _ro functions
[ Upstream commit
96b1454f2e8ede4c619fde405a1bb4e9ba8d218e ]
Before this patch, sister functions gfs2_make_fs_rw and gfs2_make_fs_ro locked
(held) the freeze glock by calling gfs2_freeze_lock and gfs2_freeze_unlock.
The problem is, not all the callers of gfs2_make_fs_ro should be doing this.
The three callers of gfs2_make_fs_ro are: remount (gfs2_reconfigure),
signal_our_withdraw, and unmount (gfs2_put_super). But when unmounting the
file system we can get into the following circular lock dependency:
deactivate_super
down_write(&s->s_umount); <-------------------------------------- s_umount
deactivate_locked_super
gfs2_kill_sb
kill_block_super
generic_shutdown_super
gfs2_put_super
gfs2_make_fs_ro
gfs2_glock_nq_init sd_freeze_gl
freeze_go_sync
if (freeze glock in SH)
freeze_super (vfs)
down_write(&sb->s_umount); <------- s_umount
This patch moves the hold of the freeze glock outside the two sister rw/ro
functions to their callers, but it doesn't request the glock from
gfs2_put_super, thus eliminating the circular dependency.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Bob Peterson [Tue, 22 Dec 2020 20:43:27 +0000 (14:43 -0600)]
gfs2: Add common helper for holding and releasing the freeze glock
[ Upstream commit
c77b52c0a137994ad796f44544c802b0b766e496 ]
Many places in the gfs2 code queued and dequeued the freeze glock.
Almost all of them acquire it in SHARED mode, and need to specify the
same LM_FLAG_NOEXP and GL_EXACT flags.
This patch adds common helper functions gfs2_freeze_lock and gfs2_freeze_unlock
to make the code more readable, and to prepare for the next patch.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Frieder Schrempf [Mon, 22 Feb 2021 11:52:20 +0000 (12:52 +0100)]
regulator: pca9450: Clear PRESET_EN bit to fix BUCK1/2/3 voltage setting
[ Upstream commit
98b94b6e38ca0c4eeb29949c656f6a315000c23e ]
The driver uses the DVS registers PCA9450_REG_BUCKxOUT_DVS0 to set the
voltage for the buck regulators 1, 2 and 3. This has no effect as the
PRESET_EN bit is set by default and therefore the preset values are used
instead, which are set to 850 mV.
To fix this we clear the PRESET_EN bit at time of initialization.
Fixes:
0935ff5f1f0a ("regulator: pca9450: add pca9450 pmic driver")
Cc: <stable@vger.kernel.org>
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Link: https://lore.kernel.org/r/20210222115229.166620-1-frieder.schrempf@kontron.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Frieder Schrempf [Thu, 11 Feb 2021 10:55:30 +0000 (11:55 +0100)]
regulator: pca9450: Enable system reset on WDOG_B assertion
[ Upstream commit
f7684f5a048febd2a7bc98ee81d6dce52f7268b8 ]
By default the PCA9450 doesn't handle the assertion of the WDOG_B
signal, but this is required to guarantee that things like software
resets triggered by the watchdog work reliably.
As we don't want to rely on the bootloader to enable this, we tell
the PMIC to issue a cold reset in case the WDOG_B signal is
asserted (WDOG_B_CFG = 10), just as the NXP U-Boot code does.
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Link: https://lore.kernel.org/r/20210211105534.38972-3-frieder.schrempf@kontron.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Frieder Schrempf [Thu, 11 Feb 2021 10:55:28 +0000 (11:55 +0100)]
regulator: pca9450: Add SD_VSEL GPIO for LDO5
[ Upstream commit
8c67a11bae889f51fe5054364c3c789dfae3ad73 ]
LDO5 has two separate control registers. LDO5CTRL_L is used if the
input signal SD_VSEL is low and LDO5CTRL_H if it is high.
The current driver implementation only uses LDO5CTRL_H. To make this
work on boards that have SD_VSEL connected to a GPIO, we add support
for specifying an optional GPIO and setting it to high at probe time.
In the future we might also want to add support for boards that have
SD_VSEL set to a fixed low level. In this case we need to change the
driver to be able to use the LDO5CTRL_L register.
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Link: https://lore.kernel.org/r/20210211105534.38972-1-frieder.schrempf@kontron.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jia-Ju Bai [Mon, 8 Mar 2021 03:11:02 +0000 (19:11 -0800)]
net: bonding: fix error return code of bond_neigh_init()
[ Upstream commit
2055a99da8a253a357bdfd359b3338ef3375a26c ]
When slave is NULL or slave_ops->ndo_neigh_setup is NULL, no error
return code of bond_neigh_init() is assigned.
To fix this bug, ret is assigned with -EINVAL in these cases.
Fixes:
9e99bfefdbce ("bonding: fix bond_neigh_init()")
Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jens Axboe [Fri, 5 Mar 2021 04:02:58 +0000 (21:02 -0700)]
io_uring: clear IOCB_WAITQ for non -EIOCBQUEUED return
[ Upstream commit
b5b0ecb736f1ce1e68eb50613c0cfecff10198eb ]
The callback can only be armed, if we get -EIOCBQUEUED returned. It's
important that we clear the WAITQ bit for other cases, otherwise we can
queue for async retry and filemap will assume that we're armed and
return -EAGAIN instead of just blocking for the IO.
Cc: stable@vger.kernel.org # 5.9+
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jens Axboe [Wed, 24 Feb 2021 02:17:35 +0000 (19:17 -0700)]
io_uring: don't attempt IO reissue from the ring exit path
[ Upstream commit
7c977a58dc83366e488c217fd88b1469d242bee5 ]
If we're exiting the ring, just let the IO fail with -EAGAIN as nobody
will care anyway. It's not the right context to reissue from.
Cc: stable@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Evan Quan [Mon, 28 Sep 2020 09:17:56 +0000 (17:17 +0800)]
drm/amd/pm: fulfill the Polaris implementation for get_clock_by_type_with_latency()
[ Upstream commit
690cdc2635849db8b782dbbcabfb1c7519c84fa1 ]
Fulfill Polaris get_clock_by_type_with_latency().
Signed-off-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Julian Wiedmann [Tue, 9 Mar 2021 16:52:20 +0000 (17:52 +0100)]
s390/qeth: schedule TX NAPI on QAOB completion
[ Upstream commit
3e83d467a08e25b27c44c885f511624a71c84f7c ]
When a QAOB notifies us that a pending TX buffer has been delivered, the
actual TX completion processing by qeth_tx_complete_pending_bufs()
is done within the context of a TX NAPI instance. We shouldn't rely on
this instance being scheduled by some other TX event, but just do it
ourselves.
qeth_qdio_handle_aob() is called from qeth_poll(), ie. our main NAPI
instance. To avoid touching the TX queue's NAPI instance
before/after it is (un-)registered, reorder the code in qeth_open()
and qeth_stop() accordingly.
Fixes:
0da9581ddb0f ("qeth: exploit asynchronous delivery of storage blocks")
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Junlin Yang [Fri, 5 Mar 2021 08:48:39 +0000 (16:48 +0800)]
ibmvnic: remove excessive irqsave
[ Upstream commit
69cdb7947adb816fc9325b4ec02a6dddd5070b82 ]
ibmvnic_remove locks multiple spinlocks while disabling interrupts:
spin_lock_irqsave(&adapter->state_lock, flags);
spin_lock_irqsave(&adapter->rwi_lock, flags);
As reported by coccinelle, the second _irqsave() overwrites the value
saved in 'flags' by the first _irqsave(), therefore when the second
_irqrestore() comes,the value in 'flags' is not valid,the value saved
by the first _irqsave() has been lost.
This likely leads to IRQs remaining disabled. So remove the second
_irqsave():
spin_lock_irqsave(&adapter->state_lock, flags);
spin_lock(&adapter->rwi_lock);
Generated by: ./scripts/coccinelle/locks/flags.cocci
./drivers/net/ethernet/ibm/ibmvnic.c:5413:1-18:
ERROR: nested lock+irqsave that reuses flags from line 5404.
Fixes:
4a41c421f367 ("ibmvnic: serialize access to work queue on remove")
Signed-off-by: Junlin Yang <yangjunlin@yulong.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ezequiel Garcia [Thu, 26 Nov 2020 09:36:08 +0000 (10:36 +0100)]
media: cedrus: h264: Support profile controls
[ Upstream commit
c8363ff21b5168f2252aa8b8447173ce48ff0149 ]
Cedrus supports H.264 profiles from Baseline to High,
except for the Extended profile
Expose the V4L2_CID_MPEG_VIDEO_H264_PROFILE so that
userspace can query the driver for the supported
profiles and levels.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@siol.net>
Tested-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Pavel Begunkov [Wed, 10 Mar 2021 11:30:37 +0000 (11:30 +0000)]
io_uring: fix inconsistent lock state
[ Upstream commit
9ae1f8dd372e0e4c020b345cf9e09f519265e981 ]
WARNING: inconsistent lock state
inconsistent {HARDIRQ-ON-W} -> {IN-HARDIRQ-W} usage.
syz-executor217/8450 [HC1[1]:SC0[0]:HE0:SE1] takes:
ffff888023d6e620 (&fs->lock){?.+.}-{2:2}, at: spin_lock include/linux/spinlock.h:354 [inline]
ffff888023d6e620 (&fs->lock){?.+.}-{2:2}, at: io_req_clean_work fs/io_uring.c:1398 [inline]
ffff888023d6e620 (&fs->lock){?.+.}-{2:2}, at: io_dismantle_req+0x66f/0xf60 fs/io_uring.c:2029
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&fs->lock);
<Interrupt>
lock(&fs->lock);
*** DEADLOCK ***
1 lock held by syz-executor217/8450:
#0:
ffff88802417c3e8 (&ctx->uring_lock){+.+.}-{3:3}, at: __do_sys_io_uring_enter+0x1071/0x1f30 fs/io_uring.c:9442
stack backtrace:
CPU: 1 PID: 8450 Comm: syz-executor217 Not tainted 5.11.0-rc5-next-
20210129-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
<IRQ>
[...]
_raw_spin_lock+0x2a/0x40 kernel/locking/spinlock.c:151
spin_lock include/linux/spinlock.h:354 [inline]
io_req_clean_work fs/io_uring.c:1398 [inline]
io_dismantle_req+0x66f/0xf60 fs/io_uring.c:2029
__io_free_req+0x3d/0x2e0 fs/io_uring.c:2046
io_free_req fs/io_uring.c:2269 [inline]
io_double_put_req fs/io_uring.c:2392 [inline]
io_put_req+0xf9/0x570 fs/io_uring.c:2388
io_link_timeout_fn+0x30c/0x480 fs/io_uring.c:6497
__run_hrtimer kernel/time/hrtimer.c:1519 [inline]
__hrtimer_run_queues+0x609/0xe40 kernel/time/hrtimer.c:1583
hrtimer_interrupt+0x334/0x940 kernel/time/hrtimer.c:1645
local_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1085 [inline]
__sysvec_apic_timer_interrupt+0x146/0x540 arch/x86/kernel/apic/apic.c:1102
asm_call_irq_on_stack+0xf/0x20
</IRQ>
__run_sysvec_on_irqstack arch/x86/include/asm/irq_stack.h:37 [inline]
run_sysvec_on_irqstack_cond arch/x86/include/asm/irq_stack.h:89 [inline]
sysvec_apic_timer_interrupt+0xbd/0x100 arch/x86/kernel/apic/apic.c:1096
asm_sysvec_apic_timer_interrupt+0x12/0x20 arch/x86/include/asm/idtentry.h:629
RIP: 0010:__raw_spin_unlock_irq include/linux/spinlock_api_smp.h:169 [inline]
RIP: 0010:_raw_spin_unlock_irq+0x25/0x40 kernel/locking/spinlock.c:199
spin_unlock_irq include/linux/spinlock.h:404 [inline]
io_queue_linked_timeout+0x194/0x1f0 fs/io_uring.c:6525
__io_queue_sqe+0x328/0x1290 fs/io_uring.c:6594
io_queue_sqe+0x631/0x10d0 fs/io_uring.c:6639
io_queue_link_head fs/io_uring.c:6650 [inline]
io_submit_sqe fs/io_uring.c:6697 [inline]
io_submit_sqes+0x19b5/0x2720 fs/io_uring.c:6960
__do_sys_io_uring_enter+0x107d/0x1f30 fs/io_uring.c:9443
do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Don't free requests from under hrtimer context (softirq) as it may sleep
or take spinlocks improperly (e.g. non-irq versions).
Cc: stable@vger.kernel.org # 5.6+
Reported-by: syzbot+81d17233a2b02eafba33@syzkaller.appspotmail.com
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Matti Gottlieb [Wed, 9 Dec 2020 21:16:45 +0000 (23:16 +0200)]
iwlwifi: Add a new card for MA family
[ Upstream commit
ac1a98e1e924e7e8d7c7e5b1ca8ddc522e10ddd0 ]
Add a PCI ID for snj with mr in AX family.
Signed-off-by: Matti Gottlieb <matti.gottlieb@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20201209231352.101ac3058c04.Idd28706b122cdc8103956f8e72bb062fe4adb54e@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Aurabindo Pillai [Thu, 26 Nov 2020 21:45:59 +0000 (16:45 -0500)]
drm/amd/display: turn DPMS off on connector unplug
[ Upstream commit
3c4d55c9b9becedd8d31a7c96783a364533713ab ]
[Why&How]
Set dpms off on the connector that was unplugged, for the side effect of
releasing some references held through deallocation of MST payload. This is
the expected behaviour for non MST devices as well.
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Eryk Brol <eryk.brol@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Alexander Lobakin [Mon, 8 Feb 2021 12:37:42 +0000 (12:37 +0000)]
MIPS: compressed: fix build with enabled UBSAN
[ Upstream commit
fc4cac4cfc437659ce445c3c47b807e1cc625b66 ]
Commit
1e35918ad9d1 ("MIPS: Enable Undefined Behavior Sanitizer
UBSAN") added a possibility to build the entire kernel with UBSAN
instrumentation for MIPS, with the exception for VDSO.
However, self-extracting head wasn't been added to exceptions, so
this occurs:
mips-alpine-linux-musl-ld: arch/mips/boot/compressed/decompress.o:
in function `FSE_buildDTable_wksp':
decompress.c:(.text.FSE_buildDTable_wksp+0x278): undefined reference
to `__ubsan_handle_shift_out_of_bounds'
mips-alpine-linux-musl-ld: decompress.c:(.text.FSE_buildDTable_wksp+0x2a8):
undefined reference to `__ubsan_handle_shift_out_of_bounds'
mips-alpine-linux-musl-ld: decompress.c:(.text.FSE_buildDTable_wksp+0x2c4):
undefined reference to `__ubsan_handle_shift_out_of_bounds'
mips-alpine-linux-musl-ld: arch/mips/boot/compressed/decompress.o:
decompress.c:(.text.FSE_buildDTable_raw+0x9c): more undefined references
to `__ubsan_handle_shift_out_of_bounds' follow
Add UBSAN_SANITIZE := n to mips/boot/compressed/Makefile to exclude
it from instrumentation scope and fix this issue.
Fixes:
1e35918ad9d1 ("MIPS: Enable Undefined Behavior Sanitizer UBSAN")
Cc: stable@vger.kernel.org # 5.0+
Signed-off-by: Alexander Lobakin <alobakin@pm.me>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Christian Melki [Wed, 24 Feb 2021 20:55:36 +0000 (21:55 +0100)]
net: phy: micrel: set soft_reset callback to genphy_soft_reset for KSZ8081
[ Upstream commit
764d31cacfe48440745c4bbb55a62ac9471c9f19 ]
Following a similar reinstate for the KSZ9031.
Older kernels would use the genphy_soft_reset if the PHY did not implement
a .soft_reset.
Bluntly removing that default may expose a lot of situations where various
PHYs/board implementations won't recover on various changes.
Like with this implementation during a 4.9.x to 5.4.x LTS transition.
I think it's a good thing to remove unwanted soft resets but wonder if it
did open a can of worms?
Atleast this fixes one iMX6 FEC/RMII/8081 combo.
Fixes:
6e2d85ec0559 ("net: phy: Stop with excessive soft reset")
Signed-off-by: Christian Melki <christian.melki@t2data.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20210224205536.9349-1-christian.melki@t2data.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Norbert Ciosek [Fri, 5 Feb 2021 08:48:52 +0000 (08:48 +0000)]
i40e: Fix endianness conversions
[ Upstream commit
b32cddd2247cf730731f93f1967d0147a40682c7 ]
Fixes the following sparse warnings:
i40e_main.c:5953:32: warning: cast from restricted __le16
i40e_main.c:8008:29: warning: incorrect type in assignment (different base types)
i40e_main.c:8008:29: expected unsigned int [assigned] [usertype] ipa
i40e_main.c:8008:29: got restricted __le32 [usertype]
i40e_main.c:8008:29: warning: incorrect type in assignment (different base types)
i40e_main.c:8008:29: expected unsigned int [assigned] [usertype] ipa
i40e_main.c:8008:29: got restricted __le32 [usertype]
i40e_txrx.c:1950:59: warning: incorrect type in initializer (different base types)
i40e_txrx.c:1950:59: expected unsigned short [usertype] vlan_tag
i40e_txrx.c:1950:59: got restricted __le16 [usertype] l2tag1
i40e_txrx.c:1953:40: warning: cast to restricted __le16
i40e_xsk.c:448:38: warning: invalid assignment: |=
i40e_xsk.c:448:38: left side has type restricted __le64
i40e_xsk.c:448:38: right side has type int
Fixes:
2f4b411a3d67 ("i40e: Enable cloud filters via tc-flower")
Fixes:
2a508c64ad27 ("i40e: fix VLAN.TCI == 0 RX HW offload")
Fixes:
3106c580fb7c ("i40e: Use batched xsk Tx interfaces to increase performance")
Fixes:
8f88b3034db3 ("i40e: Add infrastructure for queue channel support")
Signed-off-by: Norbert Ciosek <norbertx.ciosek@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sandipan Das [Thu, 4 Feb 2021 08:07:44 +0000 (13:37 +0530)]
powerpc/sstep: Fix darn emulation
[ Upstream commit
22b89ba178dd0a66a26699ead014a3e73ff8e044 ]
Commit
8813ff49607e ("powerpc/sstep: Check instruction validity
against ISA version before emulation") introduced a proper way to skip
unknown instructions. This makes sure that the same is used for the
darn instruction when the range selection bits have a reserved value.
Fixes:
a23987ef267a ("powerpc: sstep: Add support for darn instruction")
Signed-off-by: Sandipan Das <sandipan@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210204080744.135785-2-sandipan@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sandipan Das [Thu, 4 Feb 2021 08:07:43 +0000 (13:37 +0530)]
powerpc/sstep: Fix load-store and update emulation
[ Upstream commit
bbda4b6c7d7c7f79da71f95c92a5d76be22c3efd ]
The Power ISA says that the fixed-point load and update instructions
must neither use R0 for the base address (RA) nor have the
destination (RT) and the base address (RA) as the same register.
Similarly, for fixed-point stores and floating-point loads and stores,
the instruction is invalid when R0 is used as the base address (RA).
This is applicable to the following instructions.
* Load Byte and Zero with Update (lbzu)
* Load Byte and Zero with Update Indexed (lbzux)
* Load Halfword and Zero with Update (lhzu)
* Load Halfword and Zero with Update Indexed (lhzux)
* Load Halfword Algebraic with Update (lhau)
* Load Halfword Algebraic with Update Indexed (lhaux)
* Load Word and Zero with Update (lwzu)
* Load Word and Zero with Update Indexed (lwzux)
* Load Word Algebraic with Update Indexed (lwaux)
* Load Doubleword with Update (ldu)
* Load Doubleword with Update Indexed (ldux)
* Load Floating Single with Update (lfsu)
* Load Floating Single with Update Indexed (lfsux)
* Load Floating Double with Update (lfdu)
* Load Floating Double with Update Indexed (lfdux)
* Store Byte with Update (stbu)
* Store Byte with Update Indexed (stbux)
* Store Halfword with Update (sthu)
* Store Halfword with Update Indexed (sthux)
* Store Word with Update (stwu)
* Store Word with Update Indexed (stwux)
* Store Doubleword with Update (stdu)
* Store Doubleword with Update Indexed (stdux)
* Store Floating Single with Update (stfsu)
* Store Floating Single with Update Indexed (stfsux)
* Store Floating Double with Update (stfdu)
* Store Floating Double with Update Indexed (stfdux)
E.g. the following behaviour is observed for an invalid load and
update instruction having RA = RT.
While a userspace program having an instruction word like 0xe9ce0001,
i.e. ldu r14, 0(r14), runs without getting receiving a SIGILL on a
Power system (observed on P8 and P9), the outcome of executing that
instruction word varies and its behaviour can be considered to be
undefined.
Attaching an uprobe at that instruction's address results in emulation
which currently performs the load as well as writes the effective
address back to the base register. This might not match the outcome
from hardware.
To remove any inconsistencies, this adds additional checks for the
aforementioned instructions to make sure that the emulation
infrastructure treats them as unknown. The kernel can then fallback to
executing such instructions on hardware.
Fixes:
0016a4cf5582 ("powerpc: Emulate most Book I instructions in emulate_step()")
Signed-off-by: Sandipan Das <sandipan@linux.ibm.com>
Reviewed-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210204080744.135785-1-sandipan@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>