Li Zefan [Fri, 15 May 2009 03:07:56 +0000 (11:07 +0800)]
tracing/filters: fix off-by-one bug
We should leave the last slot for the ending '\0'.
[ Impact: fix possible crash when the length of an operand is 128 ]
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <
4A0CDC8C.30602@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Li Zefan [Fri, 15 May 2009 03:07:27 +0000 (11:07 +0800)]
tracing/filters: add missing unlock in a failure path
[ Impact: fix deadlock in a rare case we fail to allocate memory ]
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <
4A0CDC6F.7070200@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Steven Rostedt [Fri, 15 May 2009 03:40:06 +0000 (23:40 -0400)]
tracing: stop stack trace on first empty entry
The stack tracer stores eight entries in the ring buffer when an event
traces the stack. The output outputs all eight entries regardless of
how many entries were recorded.
This patch breaks out of the loop when a null entry is discovered.
[ Impact: only print the stack that is recorded ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Steven Rostedt [Fri, 15 May 2009 03:19:09 +0000 (23:19 -0400)]
x86/stacktrace: return 0 instead of -1 for stack ops
If we return -1 in the ops->stack for the stacktrace saving, we end up
breaking out of the loop if the stack we are tracing is in the exception
stack. This causes traces like:
<idle>-0 [002] 34263.745825: raise_softirq_irqoff <-__blk_complete_request
<idle>-0 [002] 34263.745826:
<= 0
<= 0
<= 0
<= 0
<= 0
<= 0
<= 0
By returning "0" instead, the irq stack is saved as well, and we see:
<idle>-0 [003] 883.280992: raise_softirq_irqoff <-__hrtimer_star
t_range_ns
<idle>-0 [003] 883.280992:
<= hrtimer_start_range_ns
<= tick_nohz_restart_sched_tick
<= cpu_idle
<= start_secondary
<=
<= 0
<= 0
[ Impact: record stacks from interrupts ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Steven Rostedt [Tue, 12 May 2009 02:11:05 +0000 (22:11 -0400)]
ring-buffer: move code around to remove some branches
This is a bit of micro-optimizations. But since the ring buffer is used
in tracing every function call, it is an extreme hot path. Every nanosecond
counts.
This change shows over 5% improvement in the ring-buffer-benchmark.
[ Impact: more efficient code ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Steven Rostedt [Mon, 11 May 2009 20:28:23 +0000 (16:28 -0400)]
ring-buffer: use internal time stamp function
The ring_buffer_time_stamp that is exported adds a little more overhead
than is needed for using it internally. This patch adds an internal
timestamp function that can be inlined (a single line function)
and used internally for the ring buffer.
[ Impact: a little less overhead to the ring buffer ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Steven Rostedt [Mon, 11 May 2009 20:08:00 +0000 (16:08 -0400)]
ring-buffer: small optimizations
Doing some small changes in the fast path of the ring buffer recording
saves over 3% in the ring-buffer-benchmark test.
[ Impact: a little faster ring buffer recording ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Steven Rostedt [Mon, 11 May 2009 18:42:53 +0000 (14:42 -0400)]
ring-buffer: move calculation of event length
The event length is calculated and passed in to rb_reserve_next_event
in two different locations. Having rb_reserve_next_event do the
calculations directly makes only one location to do the change and
causes the calculation to be inlined by gcc.
Before:
text data bss dec hex filename
16538 24 12 16574 40be kernel/trace/ring_buffer.o
After:
text data bss dec hex filename
16490 24 12 16526 408e kernel/trace/ring_buffer.o
[ Impact: smaller more efficient code ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Steven Rostedt [Mon, 11 May 2009 18:08:09 +0000 (14:08 -0400)]
ring-buffer: remove type parameter from rb_reserve_next_event
The rb_reserve_next_event is only called for the data type (type = 0).
There is no reason to pass in the type to the function.
Before:
text data bss dec hex filename
16554 24 12 16590 40ce kernel/trace/ring_buffer.o
After:
text data bss dec hex filename
16538 24 12 16574 40be kernel/trace/ring_buffer.o
[ Impact: cleaner, smaller and slightly more efficient code ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Steven Rostedt [Fri, 8 May 2009 15:03:57 +0000 (11:03 -0400)]
ring-buffer: check for divide by zero in ring-buffer-benchmark
Although we check if "missed" is not zero, we divide by hit + missed,
and the addition can possible overflow and become a divide by zero.
This patch checks for this case, and will report it when it happens
then modify "hit" to make the calculation be non zero.
[ Impact: prevent possible divide by zero in ring-buffer-benchmark ]
Reported-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Steven Rostedt [Fri, 8 May 2009 14:56:33 +0000 (10:56 -0400)]
ring-buffer: replace constants with time macros in ring-buffer-benchmark
The use of numeric constants is discouraged. It is cleaner and more
descriptive to use macros for constant time conversions.
This patch also removes an extra new line.
[ Impact: more descriptive time conversions ]
Reported-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Li Zefan [Mon, 11 May 2009 07:06:46 +0000 (15:06 +0800)]
blktrace: from-sector redundant in trace_block_remap, cleanup
The last argument of block_remap prober is the original sector
before remap, so it should be 'from', not 'to'.
[ Impact: clean up ]
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: "Alan D. Brunelle" <Alan.Brunelle@hp.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
LKML-Reference: <
4A07CE86.5090301@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Li Zefan [Mon, 11 May 2009 06:33:23 +0000 (14:33 +0800)]
blktrace: pdu_buf of pc events should be unsigned
I got this:
8,0 1 305.
417782332 2037 I R 32 (
ffffff9e 10 00 ...) [bash]
It should be:
8,0 1 305.
417782332 2037 I R 32 (9e 10 00 ...) [bash]
[ Impact: fix output of pc events ]
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <
4A07C6B3.9080802@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Steven Rostedt [Fri, 8 May 2009 20:27:41 +0000 (16:27 -0400)]
tracing: add trace_set_clr_event to export event enabling function
Other parts of the kernel may need to be able to enable or disable
specific events. Especially parts that create trace events.
[ Impact: allow enabling of trace events by those that create the event ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Steven Rostedt [Fri, 8 May 2009 20:06:47 +0000 (16:06 -0400)]
tracing: initialize return value for __ftrace_set_clr_event
Commit
8f31bfe538ebafac187d2d4465a92e1d9ee6d8c2
tracing/events: clean up for ftrace_set_clr_event()
Moved out the code for ftrace_set_clr_event into a helper funciton but
did not initialize the return value. As a result, we do not warn about
a typo in the echoing of events in set_event.
This patch restores the old warning:
# echo foobar > set_event
-bash: echo: write error: Invalid argument
[ Impact: restore warning of invalid entries to set_event ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Li Zefan [Fri, 8 May 2009 02:32:05 +0000 (10:32 +0800)]
tracing/events: simplify system_enable_read()
A smarter way to figure out the output of an enable file.
[ Impact: clean up ]
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <
4A0399A5.2080603@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Li Zefan [Fri, 8 May 2009 02:31:42 +0000 (10:31 +0800)]
tracing/events: clean up for ftrace_set_clr_event()
Add a helper function __ftrace_set_clr_event(), and replace some
ftrace_set_clr_event() calls with this helper, thus we don't need any
kstrdup() or kmalloc().
As a side effect, this patch fixes an issue in self tests code, which is
similar to the one fixed in commit
d6bf81ef0f7474434c2a049e8bf3c9146a14dd96
("tracing: append ":*" to internal setting of system events")
It's a small issue and won't cause any bug in fact, but we should do things
right anyway.
[ Impact: prevent spurious event-enabling in tracing self-tests ]
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <
4A03998E.3020503@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Steven Rostedt [Thu, 7 May 2009 23:58:55 +0000 (19:58 -0400)]
ring-buffer: change WARN_ON from checking preempt_count to preemptible
There's a WARN_ON in the ring buffer code that makes sure preemption
is disabled. It checks "!preempt_count()". But when CONFIG_PREEMPT is not
enabled, preempt_count() is always zero, and this will trigger the warning.
[ Impact: prevent false warning on non preemptible kernels ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Steven Rostedt [Thu, 7 May 2009 23:52:20 +0000 (19:52 -0400)]
ring-buffer: add total count in ring-buffer-benchmark
It is nice to see the overhead of the benchmark test when tracing is
disabled. That is, we turn off the ring buffer just to see what the
cost of running the loop that calls into the ring buffer is.
Currently, if no entries wer made, we get 0. This is not informative.
This patch changes it to check if we had any "missed" (non recorded)
events. If so, a total count is also reported.
[ Impact: evaluate the over head of the ring buffer benchmark test ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Steven Rostedt [Thu, 7 May 2009 18:20:28 +0000 (14:20 -0400)]
ring-buffer: only periodically call cond_resched to ring-buffer-benchmark
Calling cond_resched at every iteration of the loop adds a bit of
overhead to the benchmark.
This patch does two things.
1) only calls cond-resched when CONFIG_PREEMPT is not enabled
2) only calls cond-resched after so many traces has been performed.
[ Impact: less overhead to the ring-buffer-benchmark ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Steven Rostedt [Thu, 7 May 2009 16:49:27 +0000 (12:49 -0400)]
tracing: have menu default enabled when kernel debug is configured
Tracing can be very helpful to debug the kernel. When DEBUG_KERNEL is
enabled it is nice to enable the trace menu as well.
This patch only make the tracing menu enabled by default, it does not
make any of the tracers enabled. And the menu is only enabled by
default if DEBUG_KERNEL is enabled.
[ Impact: show tracing options to those debugging the kernel ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Steven Rostedt [Thu, 7 May 2009 15:49:35 +0000 (11:49 -0400)]
tracing: append ":*" to internal setting of system events
The system enabling of events uses the same code as the set_event file.
It passes in the name of the system to the parser and that will enable
all the events that has that system as a name.
The problem is that it will also enable events with the same name as the
system.
If you have system name foo, and system name bar, but within the system
bar, there exists an event called foo. By setting the system name foo,
you will also be enabling the event foo in the system bar. This is not
an expected result.
The solution is to pass in "foo:*", which will only enable the system
foo and not events called foo.
[ Impact: prevent accidental enabling of events with same name as a system ]
Reported-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Steven Rostedt [Thu, 7 May 2009 15:13:42 +0000 (11:13 -0400)]
ring-buffer: remove complex calculations in ring-buffer-test
Ingo Molnar thought that the code to calculate the time in cond_resched
is a bit too ugly and is not needed. This patch removes it and replaces
it with a simple call to cond_resched. I kept the comment that explains
the reason for the cond_resched.
[ Impact: remove ugly code ]
Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Ingo Molnar [Thu, 7 May 2009 09:18:34 +0000 (11:18 +0200)]
Merge branch 'tracing/hw-branch-tracing' into tracing/core
Merge reason: this topic is ready for upstream now. It passed
Oleg's review and Andrew had no further mm/*
objections/observations either.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Ingo Molnar [Thu, 7 May 2009 09:17:13 +0000 (11:17 +0200)]
Merge branch 'linus' into tracing/core
Merge reason: tracing/core was on a .30-rc1 base and was missing out on
on a handful of tracing fixes present in .30-rc5-almost.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Li Zefan [Thu, 7 May 2009 07:11:15 +0000 (15:11 +0800)]
tracing/events: fix concurrent access to ftrace_events list, fix
In filter_add_subsystem_pred() we should release event_mutex before
calling filter_free_subsystem_preds(), since both functions hold
event_mutex.
[ Impact: fix deadlock when writing invalid pred into subsystem filter ]
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: tzanussi@gmail.com
Cc: a.p.zijlstra@chello.nl
Cc: fweisbec@gmail.com
Cc: rostedt@goodmis.org
LKML-Reference: <
4A028993.7020509@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Frederic Weisbecker [Sun, 3 May 2009 01:03:57 +0000 (03:03 +0200)]
tracing/filters: support for operator reserved characters in strings
When we set a filter for an event, such as:
echo "name == my_lock_name" > \
/debug/tracing/events/lockdep/lock_acquired/filter
then the following order of token type is parsed:
- space
- operator
- parentheses
- operand
Because the operators and parentheses have a higher precedence
than the operand characters, which is normal, then we can't
use any string containing such special characters:
()=<>!&|
To get this support and also avoid ambiguous intepretation from
the parser or the human, we can do it using double quotes so that
we keep the usual languages habits.
Then after this patch you can still declare string condition like
before:
echo name == myname
But if you want to compare against a string containing an operator
character, you can use double quotes:
echo 'name == "&myname"'
Don't forget to include the whole expression into single quotes or
the double ones will be eaten by echo.
[ Impact: support strings with special characters for tracing filters ]
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Zhaolei <zhaolei@cn.fujitsu.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Frederic Weisbecker [Sun, 3 May 2009 00:48:52 +0000 (02:48 +0200)]
tracing/filters: support for filters of dynamic sized arrays
Currently the filtering infrastructure supports well the
numeric types and fixed sized array types.
But the recently added __string() field uses a specific
indirect offset mechanism which requires a specific
predicate. Until now it wasn't supported.
This patch adds this support and implies very few changes,
only a new predicate is needed, the management of this specific
field can be done through the usual string helpers in the
filtering infrastructure.
[ Impact: support all kinds of strings in the tracing filters ]
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Zhaolei <zhaolei@cn.fujitsu.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Steven Rostedt [Thu, 7 May 2009 02:52:15 +0000 (22:52 -0400)]
tracing: add hierarchical enabling of events
With the current event directory, you can only enable individual events.
The file debugfs/tracing/set_event is used to be able to enable or
disable several events at once. But that can still be awkward.
This patch adds hierarchical enabling of events. That is, each directory
in debugfs/tracing/events has an "enable" file. This file can enable
or disable all events within the directory and below.
# echo 1 > /debugfs/tracing/events/enable
will enable all events.
# echo 1 > /debugfs/tracing/events/sched/enable
will enable all events in the sched subsystem.
# echo 1 > /debugfs/tracing/events/enable
# echo 0 > /debugfs/tracing/events/irq/enable
will enable all events, but then disable just the irq subsystem events.
When reading one of these enable files, there are four results:
0 - all events this file affects are disabled
1 - all events this file affects are enabled
X - there is a mixture of events enabled and disabled
? - this file does not affect any event
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Steven Rostedt [Thu, 7 May 2009 01:54:09 +0000 (21:54 -0400)]
tracing: reset ring buffer when removing modules with events
Li Zefan found that there's a race using the event ids of events and
modules. When a module is loaded, an event id is incremented. We only
have 16 bits for event ids (65536) and there is a possible (but highly
unlikely) race that we could load and unload a module that registers
events so many times that the event id counter overflows.
When it overflows, it then restarts and goes looking for available
ids. An id is available if it was added by a module and released.
The race is if you have one module add an id, and then is removed.
Another module loaded can use that same event id. But if the old module
still had events in the ring buffer, the new module's call back would
get bogus data. At best (and most likely) the output would just be
garbage. But if the module for some reason used pointers (not recommended)
then this could potentially crash.
The safest thing to do is just reset the ring buffer if a module that
registered events is removed.
[ Impact: prevent unpredictable results of event id overflows ]
Reported-by: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <
49FEAFD0.30106@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Steven Rostedt [Thu, 7 May 2009 01:20:39 +0000 (21:20 -0400)]
tracing: update sample with TRACE_INCLUDE_FILE
When creating trace events for ftrace, the header file with the TRACE_EVENT
macros must also have a macro called TRACE_SYSTEM. This macro describes
the name of the system the TRACE_EVENTS are defined for. It also doubles
as a way for the define_trace.h file to include the file that included
it.
For example:
in irq.h
#define TRACE_SYSTEM irq
[...]
#include <trace/define_trace.h>
The define_trace will use TRACE_SYSTEM to include irq.h. But if the name
of the trace system does not match the name of the trace header file,
one can override it with:
Which will change define_trace.h to inclued foo_trace.h instead of foo.h
The sample comments this, but people that use the sample code will more
likely use the code and not read the comments. This patch changes the
sample code to use the TRACE_INCLUDE_FILE to better show developers how to
use it.
[ Impact: make sample less confusing to developers ]
Reported-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Steven Rostedt [Wed, 6 May 2009 22:36:59 +0000 (18:36 -0400)]
ring-buffer: change test to be more latency friendly
The ring buffer benchmark/test runs a producer for 10 seconds.
This is done with preemption and interrupts enabled. But if the kernel
is not compiled with CONFIG_PREEMPT, it basically stops everything
but interrupts for 10 seconds.
Although this is just a test and is not for production, this attribute
can be quite annoying. It can also spawn badness elsewhere.
This patch solves the issues by calling "cond_resched" when the system
is not compiled with CONFIG_PREEMPT. It also keeps track of the time
spent to call cond_resched such that it does not go against the
time calculations. That is, if the task schedules away, the time scheduled
out is removed from the test data. Note, this only works for non PREEMPT
because we do not know when the task is scheduled out if we have PREEMPT
enabled.
[ Impact: prevent test from stopping the world for 10 seconds ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Steven Rostedt [Wed, 6 May 2009 19:30:07 +0000 (15:30 -0400)]
ring-buffer: make moving the tail page a separate function
Ingo Molnar thought the code would be cleaner if we used a function call
instead of a goto for moving the tail page. After implementing this,
it seems that gcc still inlines the result and the output is pretty much
the same. Since this is considered a cleaner approach, might as well
implement it.
[ Impact: code clean up ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Steven Rostedt [Wed, 6 May 2009 16:40:51 +0000 (12:40 -0400)]
ring-buffer: check for failed allocation in ring buffer benchmark
The result of the allocation of the ring buffer read page in the
ring buffer bench mark does not check the return to see if a page
was actually allocated. This patch fixes that.
[ Impact: avoid NULL dereference ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Steven Rostedt [Wed, 6 May 2009 14:26:45 +0000 (10:26 -0400)]
ring-buffer: remove unneeded conditional in rb_reserve_next
The code in __rb_reserve_next checks on page overflow if it is the
original commiter and then resets the page back to the original
setting. Although this is fine, and the code is correct, it is
a bit fragil. Some experimental work I did breaks it easily.
The better and more robust solution is to have all commiters that
overflow the page, simply subtract what they added.
[ Impact: more robust ring buffer account management ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Christoph Hellwig [Wed, 6 May 2009 10:33:38 +0000 (12:33 +0200)]
tracing: small trave_events sample Makefile cleanup
Use -I$(src) to add the current directory the include path.
[ Impact: cleanup ]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Jaswinder Singh Rajput [Wed, 6 May 2009 10:15:45 +0000 (15:45 +0530)]
tracing: trace_output.c, fix false positive compiler warning
This compiler warning:
CC kernel/trace/trace_output.o
kernel/trace/trace_output.c: In function ‘register_ftrace_event’:
kernel/trace/trace_output.c:544: warning: ‘list’ may be used uninitialized in this function
Is wrong as 'list' is always initialized - but GCC (4.3.2) does not
recognize this relationship properly.
Work around the warning by initializing the variable to NULL.
[ Impact: fix false positive compiler warning ]
Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Alan D. Brunelle [Mon, 4 May 2009 20:35:08 +0000 (16:35 -0400)]
blktrace: from-sector redundant in trace_block_remap
Remove redundant from-sector parameter: it's /always/ the bio's sector
passed in.
[ Impact: cleanup ]
Signed-off-by: Alan D. Brunelle <alan.brunelle@hp.com>
Reviewed-by: Li Zefan <lizf@cn.fujitsu.com>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <
49FF517C.7000503@hp.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Alan D. Brunelle [Mon, 4 May 2009 20:27:26 +0000 (16:27 -0400)]
blktrace: correct remap names
This attempts to clarify names utilized during block I/O remap
operations (partition, volume manager). It correctly matches up the
/from/ information for both device & sector. This takes in the concept
from Kosaki Motohiro and extends it to include better naming for the
"device_from" field.
[ Impact: cleanup ]
Signed-off-by: Alan D. Brunelle <alan.brunelle@hp.com>
Reviewed-by: Li Zefan <lizf@cn.fujitsu.com>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
LKML-Reference: <
49FF4FAE.3000301@hp.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Mathieu Desnoyers [Tue, 5 May 2009 08:49:59 +0000 (16:49 +0800)]
tracepoint: trace_sched_migrate_task(): remove parameter
The orig_cpu parameter in trace_sched_migrate_task() is not necessary,
it can be got by using task_cpu(p) in the probe.
[ Impact: micro-optimization ]
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
[ modified from Mathieu's patch. The original patch is at:
http://marc.info/?l=linux-kernel&m=
123791201716239&w=2 ]
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Cc: fweisbec@gmail.com
Cc: rostedt@goodmis.org
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: zhaolei@cn.fujitsu.com
Cc: laijs@cn.fujitsu.com
LKML-Reference: <
49FFFDB7.1050402@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Li Zefan [Wed, 6 May 2009 02:33:45 +0000 (10:33 +0800)]
tracing/events: fix concurrent access to ftrace_events list
A module will add/remove its trace events when it gets loaded/unloaded, so
the ftrace_events list is not "const", and concurrent access needs to be
protected.
This patch thus fixes races between loading/unloding modules and read
'available_events' or read/write 'set_event', etc.
Below shows how to reproduce the race:
# for ((; ;)) { cat /mnt/tracing/available_events; } > /dev/null &
# for ((; ;)) { insmod trace-events-sample.ko; rmmod sample; } &
After a while:
BUG: unable to handle kernel paging request at
0010011c
IP: [<
c1080f27>] t_next+0x1b/0x2d
...
Call Trace:
[<
c10c90e6>] ? seq_read+0x217/0x30d
[<
c10c8ecf>] ? seq_read+0x0/0x30d
[<
c10b4c19>] ? vfs_read+0x8f/0x136
[<
c10b4fc3>] ? sys_read+0x40/0x65
[<
c1002a68>] ? sysenter_do_call+0x12/0x36
[ Impact: fix races when concurrent accessing ftrace_events list ]
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <
4A00F709.3080800@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Li Zefan [Wed, 6 May 2009 02:33:04 +0000 (10:33 +0800)]
tracing/events: fix memory leak when unloading module
When unloading a module, memory allocated by init_preds() and
trace_define_field() is not freed.
[ Impact: fix memory leak ]
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <
4A00F6E0.3040503@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Li Zefan [Wed, 6 May 2009 02:32:32 +0000 (10:32 +0800)]
tracing/events: make SAMPLE_TRACE_EVENTS default to n
Normally a config should be default to n. This patch also makes the
sample module-only, like SAMPLE_MARKERS and SAMPLE_TRACEPOINTS.
[ Impact: don't build trace event sample by default ]
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <
4A00F6C0.8090803@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Li Zefan [Wed, 6 May 2009 02:32:13 +0000 (10:32 +0800)]
tracing/events: don't say hi when loading the trace event sample
The sample is useful for testing, and I'm using it. But after
loading the module, it keeps saying hi every 10 seconds, this may
be disturbing.
Also Steven said commenting out the "hi" helped in causing races. :)
[ Impact: make testing a bit easier ]
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <
4A00F6AD.2070008@cn.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Steven Rostedt [Wed, 6 May 2009 02:47:18 +0000 (22:47 -0400)]
ring-buffer: add benchmark and tester
This patch adds code that can benchmark the ring buffer as well as
test it. This code can be compiled into the kernel (not recommended)
or as a module.
A separate ring buffer is used to not interfer with other users, like
ftrace. It creates a producer and a consumer (option to disable creation
of the consumer) and will run for 10 seconds, then sleep for 10 seconds
and then repeat.
While running, the producer will write 10 byte loads into the ring
buffer with just putting in the current CPU number. The reader will
continually try to read the buffer. The reader will alternate from reading
the buffer via event by event, or by full pages.
The output is a pr_info, thus it will fill up the syslogs.
Starting ring buffer hammer
End ring buffer hammer
Time: 9000349 (usecs)
Overruns:
12578640
Read: 5358440 (by events)
Entries: 0
Total:
17937080
Missed: 0
Hit:
17937080
Entries per millisec: 1993
501 ns per entry
Sleeping for 10 secs
Starting ring buffer hammer
End ring buffer hammer
Time: 9936350 (usecs)
Overruns: 0
Read:
28146644 (by pages)
Entries: 74
Total:
28146718
Missed: 0
Hit:
28146718
Entries per millisec: 2832
353 ns per entry
Sleeping for 10 secs
Time: is the time the test ran
Overruns: the number of events that were overwritten and not read
Read: the number of events read (either by pages or events)
Entries: the number of entries left in the buffer
(the by pages will only read full pages)
Total: Entries + Read + Overruns
Missed: the number of entries that failed to write
Hit: the number of entries that were written
The above example shows that it takes ~353 nanosecs per entry when
there is a reader, reading by pages (and no overruns)
The event by event reader slowed the producer down to 501 nanosecs.
[ Impact: see how changes to the ring buffer affect stability and performance ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Steven Rostedt [Wed, 6 May 2009 01:16:11 +0000 (21:16 -0400)]
ring-buffer: move big if statement down
In the hot path of the ring buffer "__rb_reserve_next" there's a big
if statement that does not even return back to the work flow.
code;
if (cross to next page) {
[ lots of code ]
return;
}
more code;
The condition is even the unlikely path, although we do not denote it
with an unlikely because gcc is fine with it. The condition is true when
the write crosses a page boundary, and we need to start at a new page.
Having this if statement makes it hard to read, but calling another
function to do the work is also not appropriate, because we are using a lot
of variables that were set before the if statement, and we do not want to
send them as parameters.
This patch changes it to a goto:
code;
if (cross to next page)
goto next_page;
more code;
return;
next_page:
[ lots of code]
This makes the code easier to understand, and a bit more obvious.
The output from gcc is practically identical. For some reason, gcc decided
to use different registers when I switched it to a goto. But other than that,
the logic is the same.
[ Impact: easier to read code ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Linus Torvalds [Wed, 6 May 2009 00:02:05 +0000 (17:02 -0700)]
Merge branch 'drm-linus' of git://git./linux/kernel/git/airlied/drm-2.6
* 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
drm/r128: fix r128 ioremaps to use ioremap_wc.
drm: cleanup properly in drm_get_dev() failure paths
drm: clean the map list before destroying the hash table
drm: remove unreachable code in drm_sysfs.c
drm: add control node checks missing from kms merge
drm/kms: don't try to shortcut drm mode set function
drm/radeon: bump minor version for occlusion queries support
Steven Rostedt [Tue, 5 May 2009 23:22:53 +0000 (19:22 -0400)]
tracing: use proper export symbol for tracing api
When adding the EXPORT_SYMBOL to some of the tracing API, I accidently
used EXPORT_SYMBOL instead of EXPORT_SYMBOL_GPL. This patch fixes
that mistake.
[ Impact: export the tracing code only for GPL modules ]
Reported-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Tim Abbott [Fri, 1 May 2009 00:06:11 +0000 (20:06 -0400)]
ftrace: use .sched.text, not .text.sched in recordmcount.pl
The only references in the kernel to the .text.sched section are in
recordmcount.pl. Since the code it has is intended to be example code
it should refer to real kernel sections. So change it to .sched.text
instead.
[ Impact: consistency in comments ]
Signed-off-by: Tim Abbott <tabbott@mit.edu>
LKML-Reference: <
1241136371-10768-1-git-send-email-tabbott@mit.edu>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Dave Airlie [Tue, 5 May 2009 23:04:52 +0000 (09:04 +1000)]
drm/r128: fix r128 ioremaps to use ioremap_wc.
This should allow r128 to start working again since PAT changes.
taken from F-11 kernel.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Linus Torvalds [Tue, 5 May 2009 22:48:03 +0000 (15:48 -0700)]
Merge branch 'release' of git://git./linux/kernel/git/aegl/linux-2.6
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6:
[IA64] xen_domu_defconfig: fix build issues/warnings
Mel Gorman [Tue, 5 May 2009 15:37:17 +0000 (16:37 +0100)]
Ignore madvise(MADV_WILLNEED) for hugetlbfs-backed regions
madvise(MADV_WILLNEED) forces page cache readahead on a range of memory
backed by a file. The assumption is made that the page required is
order-0 and "normal" page cache.
On hugetlbfs, this assumption is not true and order-0 pages are
allocated and inserted into the hugetlbfs page cache. This leaks
hugetlbfs page reservations and can cause BUGs to trigger related to
corrupted page tables.
This patch causes MADV_WILLNEED to be ignored for hugetlbfs-backed
regions.
Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Steven Rostedt [Sat, 2 May 2009 00:26:54 +0000 (20:26 -0400)]
ring-buffer: disable writers when resetting buffers
As a precaution, it is best to disable writing to the ring buffers
when reseting them.
[ Impact: prevent weird things if write happens during reset ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Steven Rostedt [Fri, 1 May 2009 23:40:05 +0000 (19:40 -0400)]
ring-buffer: have read page swap increment counter with page entries
In the swap page ring buffer code that is used by the ftrace splice code,
we scan the page to increment the counter of entries read.
With the number of entries already in the page we simply need to add it.
[ Impact: speed up reading page from ring buffer ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Linus Torvalds [Tue, 5 May 2009 19:09:38 +0000 (12:09 -0700)]
Merge branch 'timers/urgent' of git://git./linux/kernel/git/tip/linux-2.6-tip
* 'timers/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
clockevents: prevent endless loop in tick_handle_periodic()
Linus Torvalds [Tue, 5 May 2009 19:09:27 +0000 (12:09 -0700)]
Merge branch 'irq/urgent' of git://git./linux/kernel/git/tip/linux-2.6-tip
* 'irq/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
Revert "genirq: assert that irq handlers are indeed running in hardirq context"
Linus Torvalds [Tue, 5 May 2009 19:08:40 +0000 (12:08 -0700)]
Merge branch 'sched-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip
* 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
sched: account system time properly
Linus Torvalds [Tue, 5 May 2009 19:08:20 +0000 (12:08 -0700)]
Merge branch 'core-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip
* 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
kernel/posix-cpu-timers.c: fix sparse warning
dma-debug: remove broken dma memory leak detection for 2.6.30
locking: Documentation: lockdep-design.txt, fix note of state bits
Linus Torvalds [Tue, 5 May 2009 19:08:02 +0000 (12:08 -0700)]
Merge branch 'tracing-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip
* 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
tracing: x86, mmiotrace: fix range test
tracing: fix ref count in splice pages
Linus Torvalds [Tue, 5 May 2009 19:07:21 +0000 (12:07 -0700)]
Merge branch 'x86-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip
* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86: show number of core_siblings instead of thread_siblings in /proc/cpuinfo
amd-iommu: fix iommu flag masks
x86: initialize io_bitmap_base on 32bit
x86: gettimeofday() vDSO: fix segfault when tv == NULL
Linus Torvalds [Tue, 5 May 2009 19:06:54 +0000 (12:06 -0700)]
Merge git://git./linux/kernel/git/sam/kbuild-fixes
* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-fixes:
kbuild, modpost: fix unexpected non-allocatable warning with mips
kbuild, modpost: fix "unexpected non-allocatable" warning with SUSE gcc
kbuild, modpost: fix unexpected non-allocatable section when cross compiling
Jan Beulich [Tue, 5 May 2009 12:57:52 +0000 (13:57 +0100)]
[IA64] xen_domu_defconfig: fix build issues/warnings
- drivers/xen/events.c did not compile
- xen_setup_hook caused a modpost section warning
- the use of u64 (instead of unsigned long long) together with a %llu
in drivers/xen/balloon.c caused a compiler warning
Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Steven Rostedt [Fri, 1 May 2009 22:44:45 +0000 (18:44 -0400)]
ring-buffer: record page entries in buffer page descriptor
Currently, when the ring buffer writer overflows the buffer and must
write over non consumed data, we increment the overrun counter by
reading the entries on the page we are about to overwrite. This reads
the entries one by one.
This is not very effecient. This patch adds another entry counter
into each buffer page descriptor that keeps track of the number of
entries on the page. Now on overwrite, the overrun counter simply
needs to add the number of entries that is on the page it is about
to overwrite.
[ Impact: speed up of ring buffer in overwrite mode ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Steven Rostedt [Fri, 1 May 2009 00:49:44 +0000 (20:49 -0400)]
ring-buffer: convert cpu buffer entries to local_t
The entries counter in cpu buffer is not atomic. It can be updated by
other interrupts or from another CPU (readers).
But making entries into "atomic_t" causes an atomic operation that can
hurt performance. Instead we convert it to a local_t that will increment
a counter with a local CPU atomic operation (if the arch supports it).
Instead of fighting with readers and overwrites that decrement the counter,
I added a "read" counter. Every time a reader reads an entry it is
incremented.
We already have a overrun counter and with that, the entries counter and
the read counter, we can calculate the total number of entries in the
buffer with:
(entries - overrun) - read
As long as the total number of entries in the ring buffer is less than
the word size, this will work. But since the entries counter was previously
a long, this is no different than what we had before.
Thanks to Andrew Morton for pointing out in the first version that
atomic_t does not replace unsigned long. I switched to atomic_long_t
even though it is signed. A negative count is most likely a bug.
[ Impact: keep accurate count of cpu buffer entries ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Steven Rostedt [Wed, 29 Apr 2009 22:03:45 +0000 (18:03 -0400)]
tracing: export stats of ring buffers to userspace
This patch adds stats to the ftrace ring buffers:
# cat /debugfs/tracing/per_cpu/cpu0/stats
entries: 42360
overrun:
30509326
commit overrun: 0
nmi dropped: 0
Where entries are the total number of data entries in the buffer.
overrun is the number of entries not consumed and were overwritten by
the writer.
commit overrun is the number of entries dropped due to nested writers
wrapping the buffer before the initial writer finished the commit.
nmi dropped is the number of entries dropped due to the ring buffer
lock being held when an nmi was going to write to the ring buffer.
Note, this field will be meaningless and will go away when the ring
buffer becomes lockless.
[ Impact: let userspace know what is happening in the ring buffers ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Steven Rostedt [Wed, 29 Apr 2009 17:43:37 +0000 (13:43 -0400)]
ring-buffer: add counters for commit overrun and nmi dropped entries
The WARN_ON in the ring buffer when a commit is preempted and the
buffer is filled by preceding writes can happen in normal operations.
The WARN_ON makes it look like a bug, not to mention, because
it does not stop tracing and calls printk which can also recurse, this
is prone to deadlock (the WARN_ON is not in a position to recurse).
This patch removes the WARN_ON and replaces it with a counter that
can be retrieved by a tracer. This counter is called commit_overrun.
While at it, I added a nmi_dropped counter to count any time an NMI entry
is dropped because the NMI could not take the spinlock.
[ Impact: prevent deadlock by printing normal case warning ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Steven Rostedt [Tue, 5 May 2009 05:15:24 +0000 (01:15 -0400)]
ring-buffer: export symbols
I'm adding a module to do a series of tests on the ring buffer as well
as benchmarks. This module needs to have more of the ring buffer API
exported. There's nothing wrong with reading the ring buffer from a
module.
[ Impact: allow modules to read pages from the ring buffer ]
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Linus Torvalds [Tue, 5 May 2009 15:27:14 +0000 (08:27 -0700)]
Merge branch 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6
* 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6:
i2c-algo-pca: Let PCA9564 recover from unacked data byte (state 0x30)
i2c-algo-bit: Fix timeout test
i2c: Timeouts off by 1
Linus Torvalds [Tue, 5 May 2009 15:26:10 +0000 (08:26 -0700)]
Merge git://git./linux/kernel/git/davem/net-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (30 commits)
e1000: fix virtualization bug
bonding: fix alb mode locking regression
Bluetooth: Fix issue with sysfs handling for connections
usbnet: CDC EEM support (v5)
tcp: Fix tcp_prequeue() to get correct rto_min value
ehea: fix invalid pointer access
ne2k-pci: Do not register device until initialized.
Subject: [PATCH] br2684: restore net_dev initialization
net: Only store high 16 bits of kernel generated filter priorities
virtio_net: Fix function name typo
virtio_net: Cleanup command queue scatterlist usage
bonding: correct the cleanup in bond_create()
virtio: add missing include to virtio_net.h
smsc95xx: add support for LAN9512 and LAN9514
smsc95xx: configure LED outputs
netconsole: take care of NETDEV_UNREGISTER event
xt_socket: checks for the state of nf_conntrack
bonding: bond_slave_info_query() fix
cxgb3: fixing gcc 4.4 compiler warning: suggest parentheses around operand of ‘!’
netfilter: use likely() in xt_info_rdlock_bh()
...
Linus Torvalds [Tue, 5 May 2009 15:25:37 +0000 (08:25 -0700)]
Merge branch 'merge' of git://git./linux/kernel/git/benh/powerpc
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
powerpc: Fix setting of oprofile cpu type
powerpc: Update MPC5xxx and Xilinx Virtex maintainer entries
powerpc adjust oprofile_cpu_type version 3
Linus Torvalds [Tue, 5 May 2009 15:24:41 +0000 (08:24 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/jmorris/security-testing-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6:
selinux: Fix send_sigiotask hook
Linus Torvalds [Tue, 5 May 2009 15:23:42 +0000 (08:23 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/ericvh/v9fs
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs:
net/9p: handle correctly interrupted 9P requests
net/9p: return error when p9_client_stat fails
net/9p: set correct stat size when sending Twstat messages
Linus Torvalds [Tue, 5 May 2009 15:23:16 +0000 (08:23 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/drzeus/mmc
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc:
mvsdio: fix CONFIG_PM=y build
mmci: fix crash with debug enabled
sdhci: catch ADMA errors
mmc: increase power up delay
sdhci-pci: bad error handling in probe function
mmc_block: be prepared for oversized requests
Linus Torvalds [Tue, 5 May 2009 15:22:55 +0000 (08:22 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/tiwai/sound-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
ASoC: Remove BROKEN from mpc5200 kconfig
ASoC: TWL4030: Fix gain control for earpiece amplifier
ALSA: pcm core - Avoid jiffies check for devices with BATCH flag
ALSA: Add missing SNDRV_PCM_INFO_BATCH flag to some drivers
ALSA: indigo-express: add missing 64KHz flags
ASoC: Set the MPC5200 i2s driver to BROKEN status.
ASoC: Fix logic in WM8350 master clocking check
Enrik Berkhan [Tue, 5 May 2009 06:39:25 +0000 (08:39 +0200)]
i2c-algo-pca: Let PCA9564 recover from unacked data byte (state 0x30)
Currently, the i2c-algo-pca driver does nothing if the chip enters state
0x30 (Data byte in I2CDAT has been transmitted; NOT ACK has been
received). Thus, the i2c bus connected to the controller gets stuck
afterwards.
I have seen this kind of error on a custom board in certain load
situations most probably caused by interference or noise.
A possible reaction is to let the controller generate a STOP condition.
This is documented in the PCA9564 data sheet (2006-09-01) and the same
is done for other NACK states as well.
Further, state 0x38 isn't handled completely, either. Try to do another
START in this case like the data sheet says. As this couldn't be tested,
I've added a comment to try to reset the chip if the START doesn't help
as suggested by Wolfram Sang.
Signed-off-by: Enrik Berkhan <Enrik.Berkhan@ge.com>
Reviewed-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Dave Airlie [Tue, 5 May 2009 06:39:24 +0000 (08:39 +0200)]
i2c-algo-bit: Fix timeout test
When fetching DDC using i2c algo bit, we were often seeing timeouts
before getting valid EDID on a retry. The VESA spec states 2ms is the
DDC timeout, so when this translates into 1 jiffie and we are close
to the end of the time period, it could return with a timeout less than
2ms.
Change this code to use time_after instead of time_after_eq.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Roel Kluin [Tue, 5 May 2009 06:39:24 +0000 (08:39 +0200)]
i2c: Timeouts off by 1
with while (timeout++ < MAX_TIMEOUT); timeout reaches MAX_TIMEOUT + 1
after the loop, so the tests below are off by one.
Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
David S. Miller [Tue, 5 May 2009 04:31:29 +0000 (21:31 -0700)]
Merge branch 'master' of git://git./linux/kernel/git/holtmann/bluetooth-2.6
Jesse Brandeburg [Mon, 4 May 2009 11:19:42 +0000 (11:19 +0000)]
e1000: fix virtualization bug
a recent fix to e1000 (commit
15b2bee2) caused KVM/QEMU/VMware based
virtualized e1000 interfaces to begin failing when resetting.
This is because the driver in a virtual environment doesn't
get to run instructions *AT ALL* when an interrupt is asserted.
The interrupt code runs immediately and this recent bug fix
allows an interrupt to be possible when the interrupt handler
will reject it (due to the new code), when being called from
any path in the driver that holds the E1000_RESETTING flag.
the driver should use the __E1000_DOWN flag instead of the
__E1000_RESETTING flag to prevent interrupt execution
while reconfiguring the hardware.
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jay Vosburgh [Mon, 4 May 2009 09:03:37 +0000 (09:03 +0000)]
bonding: fix alb mode locking regression
Fix locking issue in alb MAC address management; removed
incorrect locking and replaced with correct locking. This bug was
introduced in commit
059fe7a578fba5bbb0fdc0365bfcf6218fa25eb0
("bonding: Convert locks to _bh, rework alb locking for new locking")
Bug reported by Paul Smith <paul@mad-scientist.net>, who also
tested the fix.
Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stephen Smalley [Mon, 4 May 2009 19:43:18 +0000 (15:43 -0400)]
selinux: Fix send_sigiotask hook
The CRED patch incorrectly converted the SELinux send_sigiotask hook to
use the current task SID rather than the target task SID in its
permission check, yielding the wrong permission check. This fixes the
hook function. Detected by the ltp selinux testsuite and confirmed to
correct the test failure.
Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: James Morris <jmorris@namei.org>
Jake Edge [Mon, 4 May 2009 18:51:14 +0000 (12:51 -0600)]
proc: avoid information leaks to non-privileged processes
By using the same test as is used for /proc/pid/maps and /proc/pid/smaps,
only allow processes that can ptrace() a given process to see information
that might be used to bypass address space layout randomization (ASLR).
These include eip, esp, wchan, and start_stack in /proc/pid/stat as well
as the non-symbolic output from /proc/pid/wchan.
ASLR can be bypassed by sampling eip as shown by the proof-of-concept
code at http://code.google.com/p/fuzzyaslr/ As part of a presentation
(http://www.cr0.org/paper/to-jt-linux-alsr-leak.pdf) esp and wchan were
also noted as possibly usable information leaks as well. The
start_stack address also leaks potentially useful information.
Cc: Stable Team <stable@kernel.org>
Signed-off-by: Jake Edge <jake@lwn.net>
Acked-by: Arjan van de Ven <arjan@linux.intel.com>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Marcel Holtmann [Sun, 3 May 2009 01:24:06 +0000 (18:24 -0700)]
Bluetooth: Fix issue with sysfs handling for connections
Due to a semantic changes in flush_workqueue() the current approach of
synchronizing the sysfs handling for connections doesn't work anymore. The
whole approach is actually fully broken and based on assumptions that are
no longer valid.
With the introduction of Simple Pairing support, the creation of low-level
ACL links got changed. This change invalidates the reason why in the past
two independent work queues have been used for adding/removing sysfs
devices. The adding of the actual sysfs device is now postponed until the
host controller successfully assigns an unique handle to that link. So
the real synchronization happens inside the controller and not the host.
The only left-over problem is that some internals of the sysfs device
handling are not initialized ahead of time. This leaves potential access
to invalid data and can cause various NULL pointer dereferences. To fix
this a new function makes sure that all sysfs details are initialized
when an connection attempt is made. The actual sysfs device is only
registered when the connection has been successfully established. To
avoid a race condition with the registration, the check if a device is
registered has been moved into the removal work.
As an extra protection two flush_work() calls are left in place to
make sure a previous add/del work has been completed first.
Based on a report by Marc Pignat <marc.pignat@hevs.ch>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Tested-by: Justin P. Mattock <justinmattock@gmail.com>
Tested-by: Roger Quadros <ext-roger.quadros@nokia.com>
Tested-by: Marc Pignat <marc.pignat@hevs.ch>
Omar Laazimani [Mon, 4 May 2009 19:01:43 +0000 (12:01 -0700)]
usbnet: CDC EEM support (v5)
This introduces a CDC Ethernet Emulation Model (EEM) host side
driver to support USB EEM devices.
EEM is different from the Ethernet Control Model (ECM) currently
supported by the "CDC Ethernet" driver. One key difference is
that it doesn't require of USB interface alternate settings to
manage interface state; some maldesigned hardware can't handle
that part of USB. It also avoids a separate USB interface for
control and status updates.
[ dbrownell@users.sourceforge.net: fix skb leaks, add rx packet
checks, improve fault handling, EEM conformance updates, cleanup ]
Signed-off-by: Omar Laazimani <omar.oberthur@gmail.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Andreas Herrmann [Mon, 4 May 2009 18:28:59 +0000 (20:28 +0200)]
x86: show number of core_siblings instead of thread_siblings in /proc/cpuinfo
Commit
7ad728f98162cb1af06a85b2a5fc422dddd4fb78
(cpumask: x86: convert cpu_sibling_map/cpu_core_map to cpumask_var_t)
changed the output of /proc/cpuinfo for siblings:
Example on an AMD Phenom:
physical id : 0
siblings : 1
core id : 3
cpu cores : 4
Before that commit it was:
physical id : 0
siblings : 4
core id : 3
cpu cores : 4
Instead of cpu_core_mask it now uses cpu_sibling_mask to count siblings.
This is due to the following hunk of above commit:
| --- a/arch/x86/kernel/cpu/proc.c
| +++ b/arch/x86/kernel/cpu/proc.c
| @@ -14,7 +14,7 @@ static void show_cpuinfo_core(struct seq_file *m, struct cpuinf
| if (c->x86_max_cores * smp_num_siblings > 1) {
| seq_printf(m, "physical id\t: %d\n", c->phys_proc_id);
| seq_printf(m, "siblings\t: %d\n",
| - cpus_weight(per_cpu(cpu_core_map, cpu)));
| + cpumask_weight(cpu_sibling_mask(cpu)));
| seq_printf(m, "core id\t\t: %d\n", c->cpu_core_id);
| seq_printf(m, "cpu cores\t: %d\n", c->booted_cores);
| seq_printf(m, "apicid\t\t: %d\n", c->apicid);
This was a mistake, because the impact line shows that this side-effect
was not anticipated:
Impact: reduce per-cpu size for CONFIG_CPUMASK_OFFSTACK=y
So revert the respective hunk to restore the old behavior.
[ Impact: fix sibling-info regression in /proc/cpuinfo ]
Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
LKML-Reference: <
20090504182859.GA29045@alberich.amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Satoru SATOH [Mon, 4 May 2009 18:11:01 +0000 (11:11 -0700)]
tcp: Fix tcp_prequeue() to get correct rto_min value
tcp_prequeue() refers to the constant value (TCP_RTO_MIN) regardless of
the actual value might be tuned. The following patches fix this and make
tcp_prequeue get the actual value returns from tcp_rto_min().
Signed-off-by: Satoru SATOH <satoru.satoh@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hannes Hering [Mon, 4 May 2009 18:06:37 +0000 (11:06 -0700)]
ehea: fix invalid pointer access
This patch fixes an invalid pointer access in case the receive queue
holds no pointer to the next skb when the queue is empty.
Signed-off-by: Hannes Hering <hering2@de.ibm.com>
Signed-off-by: Jan-Bernd Themann <themann@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Takashi Iwai [Mon, 4 May 2009 14:06:58 +0000 (16:06 +0200)]
Merge branch 'fix/misc' into for-linus
* fix/misc:
ALSA: indigo-express: add missing 64KHz flags
Takashi Iwai [Mon, 4 May 2009 14:06:43 +0000 (16:06 +0200)]
Merge branch 'fix/asoc' into for-linus
* fix/asoc:
ASoC: Remove BROKEN from mpc5200 kconfig
ASoC: TWL4030: Fix gain control for earpiece amplifier
ASoC: Set the MPC5200 i2s driver to BROKEN status.
ASoC: Fix logic in WM8350 master clocking check
Takashi Iwai [Mon, 4 May 2009 14:06:37 +0000 (16:06 +0200)]
Merge branch 'fix/pcm-jiffies-check' into for-linus
* fix/pcm-jiffies-check:
ALSA: pcm core - Avoid jiffies check for devices with BATCH flag
ALSA: Add missing SNDRV_PCM_INFO_BATCH flag to some drivers
Takashi Iwai [Mon, 4 May 2009 14:03:21 +0000 (16:03 +0200)]
ASoC: Remove BROKEN from mpc5200 kconfig
The regression was fixed by commit
3e5b50165fd0be080044586f43fcdd460ed27610, so no need to mark this
driver as BROKEN.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Mon, 4 May 2009 14:00:16 +0000 (16:00 +0200)]
Merge branch 'fix/pcm-jiffies-check' into fix/asoc
Joerg Roedel [Mon, 4 May 2009 09:44:38 +0000 (11:44 +0200)]
amd-iommu: fix iommu flag masks
The feature bits should be set via bitmasks, not via feature IDs.
[ Impact: fix feature enabling in newer IOMMU versions ]
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
LKML-Reference: <
20090504102028.GA30307@amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Sam Ravnborg [Mon, 4 May 2009 11:05:26 +0000 (13:05 +0200)]
kbuild, modpost: fix unexpected non-allocatable warning with mips
mips emit the following debug sections:
.mdebug* and .pdr
They were included in the check for non-allocatable section
and caused modpost to warn.
Manuel Lauss suggested to fix this by adding the relevant
sections to the list of sections we do not check.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reported-by: Manuel Lauss <mano@roarinelk.homelinux.net>
Sam Ravnborg [Sun, 3 May 2009 20:17:37 +0000 (22:17 +0200)]
kbuild, modpost: fix "unexpected non-allocatable" warning with SUSE gcc
Jean reported that he saw one warning for each module like the one below:
WARNING: arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.o (.comment.SUSE.OPTs): unexpected non-allocatable section.
The warning appeared with the improved version of the
check of the flags in the sections.
That check already ignored sections named ".comment" - but SUSE store
additional info in the comment section and has named it in a SUSE
specific way. Therefore modpost failed to ignore the section.
The fix is to extend the pattern so we ignore all sections
that start with the name ".comment.".
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reported-by: Jean Delvare <khali@linux-fr.org>
Tested-by: Jean Delvare <khali@linux-fr.org>
Anders Kaseorg [Sun, 3 May 2009 20:02:55 +0000 (22:02 +0200)]
kbuild, modpost: fix unexpected non-allocatable section when cross compiling
The missing TO_NATIVE(sechdrs[i].sh_flags) was causing many
unexpected non-allocatable section warnings when cross-compiling
for an architecture with a different endianness.
Fix endianness of all the fields in the ELF header and
section headers, not just some of them so we are not
hit by this anohter time.
Signed-off-by: Anders Kaseorg <andersk@mit.edu>
Reported-by: Sean MacLennan <smaclennan@pikatech.com>
Tested-by: Sean MacLennan <smaclennan@pikatech.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Rabin Vincent [Mon, 20 Apr 2009 18:44:54 +0000 (00:14 +0530)]
mvsdio: fix CONFIG_PM=y build
Fix usage of obsolete parameters and functions in the driver's PM
callbacks.
Signed-off-by: Rabin Vincent <rabin@rab.in>
Acked-by: Nicolas Pitre <nico@marvell.com>
Signed-off-by: Pierre Ossman <pierre@ossman.eu>
Rabin Vincent [Fri, 17 Apr 2009 03:14:19 +0000 (08:44 +0530)]
mmci: fix crash with debug enabled
If MMC debugging is enabled, the mmci driver oopses because the DBG
macro uses host->mmc before it is set. Set it earlier.
Signed-off-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Pierre Ossman <pierre@ossman.eu>
Pierre Ossman [Fri, 10 Apr 2009 21:55:42 +0000 (23:55 +0200)]
sdhci: catch ADMA errors
We forgot to add the ADMA error bit to the list of data interrupts.
Signed-off-by: Pierre Ossman <pierre@ossman.eu>
José M. Fernández [Tue, 10 Mar 2009 01:21:21 +0000 (02:21 +0100)]
mmc: increase power up delay
The TI controller on Toshiba Tecra M5 needs more time to power up or
the cards will init incorrectly or not at all.
Signed-off-by: José M. Fernández <josemariafg@gmail.com>
Signed-off-by: Pierre Ossman <pierre@ossman.eu>