scsi: iscsi: ql4xxx: Use per-session workqueue for unbinding

We currently allocate a workqueue per host and only use it for removing the
target. For the session per host case we could be using this workqueue to
be able to do recoveries (block, unblock, timeout handling) in parallel. To
also allow offload drivers to do their session recoveries in parallel, this
drops the per host workqueue and replaces it with a per session one.

Link: https://lore.kernel.org/r/20220226230435.38733-5-michael.christie@oracle.com
Reviewed-by: Lee Duncan <lduncan@suse.com>
Reviewed-by: Chris Leech <cleech@redhat.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: iscsi: Remove iscsi_scan_finished()

qla4xxx does not use iscsi_scan_finished() anymore so remove it.

Link: https://lore.kernel.org/r/20220226230435.38733-4-michael.christie@oracle.com
Reviewed-by: Lee Duncan <lduncan@suse.com>
Reviewed-by: Chris Leech <cleech@redhat.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: iscsi: Speed up session unblocking and removal

When the iSCSI class was added upstream, blocking a queue was fast because
it just set some flag bits and didn't handle I/O that was in the process of
being sent to the driver. That's no longer the case so blocking a queue is
expensive and we can end up with a backlog of blocks by the time we have
relogged in and are trying to start the queues.

For the session unblock case, this has try to cancel the block and recovery
work in case they are still queued so we can avoid unneeded queue
manipulations. For removal, we also now try to cancel all the recovery
related works since a couple lines down we will set the session and device
state so running those functions are not necessary.

Link: https://lore.kernel.org/r/20220226230435.38733-3-michael.christie@oracle.com
Reviewed-by: Lee Duncan <lduncan@suse.com>
Reviewed-by: Chris Leech <cleech@redhat.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: iscsi: Fix recovery and unblocking race

If the user sets the iscsi_eh_timer_workq/iscsi_eh workqueue's max_active
to greater than 1, the recovery_work could be running when
__iscsi_unblock_session() runs. The cancel_delayed_work() will then not
wait for the running work and we can race where we end up with the wrong
session state and scsi_device state set.

This replaces the cancel_delayed_work() with the sync version.

Link: https://lore.kernel.org/r/20220226230435.38733-2-michael.christie@oracle.com
Reviewed-by: Lee Duncan <lduncan@suse.com>
Reviewed-by: Chris Leech <cleech@redhat.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: scsi_transport_fc: Fix FPIN Link Integrity statistics counters

In the original FPIN commit, stats were incremented by the event_count.
Event_count is the minimum # of events that must occur before an FPIN is
sent. Thus, its not the actual number of events, and could be significantly
off (too low) as it doesn't reflect anything not reported.  Rather than
attempt to count events, have the statistic count how many FPINS cross the
threshold and were reported.

Link: https://lore.kernel.org/r/20220301175536.60250-1-jsmart2021@gmail.com
Fixes: 3dcfe0de5a97 ("scsi: fc: Parse FPIN packets and update statistics")
Cc: <stable@vger.kernel.org> # v5.11+
Cc: Shyam Sundar <ssundar@marvell.com>
Cc: Nilesh Javali <njavali@marvell.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: libsas: Clean up sas_form_port()

Sparse throws a warning about context imbalance ("different lock contexts
for basic block") in sas_form_port() as it gets confused with the fact that
a port is locked within one of the two search loops and unlocked afterward
outside of the search loops once the phy is added to the port. Since this
code is not easy to follow, improve it by factoring out the code adding the
phy to the port once the port is locked into the helper function
sas_form_port_add_phy(). This helper can then be called directly within the
port search loops, avoiding confusion and clearing the sparse warning.

Link: https://lore.kernel.org/r/20220228094857.557329-1-damien.lemoal@opensource.wdc.com
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: core: Remove <scsi/scsi_request.h>

This header is empty now except for an include of <linux/blk-mq.h>, so
remove it.

Link: https://lore.kernel.org/r/20220224175552.988286-9-hch@lst.de
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: core: Remove struct scsi_request

Let submitters initialize the scmd->allowed field directly instead of
indirecting through struct scsi_request and remove the now superfluous
structure.

Link: https://lore.kernel.org/r/20220224175552.988286-8-hch@lst.de
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: core: Move the result field from struct scsi_request to struct scsi_cmnd

Prepare for removing the scsi_request structure by moving the result field
to struct scsi_cmnd.

Link: https://lore.kernel.org/r/20220224175552.988286-7-hch@lst.de
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: core: Move the resid_len field from struct scsi_request to struct scsi_cmnd

Prepare for removing the scsi_request structure by moving the resid_len
field to struct scsi_cmnd.

Link: https://lore.kernel.org/r/20220224175552.988286-6-hch@lst.de
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: core: Remove the sense and sense_len fields from struct scsi_request

Just use the sense_buffer field in struct scsi_cmnd for the sense data and
move the sense_len field over to struct scsi_cmnd.

Link: https://lore.kernel.org/r/20220224175552.988286-5-hch@lst.de
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: core: Remove the cmd field from struct scsi_request

Now that each scsi_request is backed by a scsi_cmnd, there is no need to
indirect the CDB storage.  Change all submitters of SCSI passthrough
requests to store the CDB information directly in the scsi_cmnd, and while
doing so allocate the full 32 bytes that cover all Linux supported SCSI
hosts instead of requiring dynamic allocation for > 16 byte CDBs.  On
64-bit systems this does not change the size of the scsi_cmnd at all, while
on 32-bit systems it slightly increases it for now, but that increase will
be made up by the removal of the remaining scsi_request fields.

Link: https://lore.kernel.org/r/20220224175552.988286-4-hch@lst.de
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: core: Don't memset() the entire scsi_cmnd in scsi_init_command()

Replace the big fat memset that requires saving and restoring various
fields with just initializing those fields that need initialization.

All the clearing to 0 is moved to scsi_prepare_cmd() as scsi_ioctl_reset()
alreadly uses kzalloc() to allocate a pre-zeroed command.

This is still conservative and can probably be optimized further.

Link: https://lore.kernel.org/r/20220224175552.988286-3-hch@lst.de
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: target: pscsi: Remove struct pscsi_plugin_task

Copy directly from the se_cmd CDB to the one in the scsi_request.  This
temporarily limits the pscsi backend to supporting only up to 16 byte CDBs,
but this restriction will be lifted later in this series.

Link: https://lore.kernel.org/r/20220224175552.988286-2-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: libsas: Use bool for queue_work() return code

Function queue_work() returns a bool, so use a bool to hold this value for
the return code from callers, which should make the code a tiny bit more
clear.

Also take this opportunity to condense the code of the those callers, such
as sas_queue_work(), as suggested by Damien.

Link: https://lore.kernel.org/r/1645786656-221630-3-git-send-email-john.garry@huawei.com
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: libsas: Make sas_notify_{phy,port}_event() return void

Nobody checks the return codes, so make them return void. Indeed, if the
LLDD cannot send an event, nothing much can be done in the LLDD about it.

Also remove prototype for sas_notify_phy_event() in sas_internal.h, which
should not be there.

Link: https://lore.kernel.org/r/1645786656-221630-2-git-send-email-john.garry@huawei.com
Reviewed-by: Xiang Chen <chenxiang66@hisilicon.com>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: hisi_sas: Modify v3 HW SSP underflow error processing

In case of SSP underflow allow the response frame IU to be examined for
setting the response stat value rather than always setting
SAS_DATA_UNDERRUN.

This will mean that we call sas_ssp_task_response() in those scenarios and
may send sense data to upper layer.

Such a condition would be for bad blocks were we just reporting an
underflow error to upper layer, but now the sense data will tell
immediately that the media is faulty.

Link: https://lore.kernel.org/r/1645703489-87194-7-git-send-email-john.garry@huawei.com
Signed-off-by: Xingui Yang <yangxingui@huawei.com>
Signed-off-by: Qi Liu <liuqi115@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: hisi_sas: Limit users changing debugfs BIST count value

Add a file operation for "cnt" file under bist directory, so users can only
read "cnt" or clear "cnt" to zero, but cannot randomly modify.

Link: https://lore.kernel.org/r/1645703489-87194-6-git-send-email-john.garry@huawei.com
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: Qi Liu <liuqi115@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: hisi_sas: Rename error labels in hisi_sas_v3_probe()

To avoid doubt, rename the error labels to indicate the action they will
take.

Link: https://lore.kernel.org/r/1645703489-87194-5-git-send-email-john.garry@huawei.com
Signed-off-by: Qi Liu <liuqi115@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: hisi_sas: Free irq vectors in order for v3 HW

If the driver probe fails to request the channel IRQ or fatal IRQ, the
driver will free the IRQ vectors before freeing the IRQs in free_irq(),
and this will cause a kernel BUG like this:

------------[ cut here ]------------
kernel BUG at drivers/pci/msi.c:369!
Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
Call trace:
   free_msi_irqs+0x118/0x13c
   pci_disable_msi+0xfc/0x120
   pci_free_irq_vectors+0x24/0x3c
   hisi_sas_v3_probe+0x360/0x9d0 [hisi_sas_v3_hw]
   local_pci_probe+0x44/0xb0
   work_for_cpu_fn+0x20/0x34
   process_one_work+0x1d0/0x340
   worker_thread+0x2e0/0x460
   kthread+0x180/0x190
   ret_from_fork+0x10/0x20
---[ end trace b88990335b610c11 ]---

So we use devm_add_action() to control the order in which we free the
vectors.

Link: https://lore.kernel.org/r/1645703489-87194-4-git-send-email-john.garry@huawei.com
Signed-off-by: Qi Liu <liuqi115@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: hisi_sas: Change hisi_sas_control_phy() phyup timeout

The time of phyup not only depends on the controller but also the type of
disk connected. As an example, from experience, for some SATA disks the
amount of time from reset/power-on to receive the D2H FIS for phyup can
take upto and more than 10s sometimes. According to the specification of
some SATA disks such as ST14000NM0018, the max time from power-on to ready
is 30s.

Based on this the current timeout of phyup at 2s which is not enough. So
set the value as HISI_SAS_WAIT_PHYUP_TIMEOUT (30s) in
hisi_sas_control_phy().

For v3 hw there is a pre-existing workaround for a HW bug, being that we
issue a link reset when the OOB occurs but the phyup does not. The current
phyup timeout is HISI_SAS_WAIT_PHYUP_TIMEOUT. So if this does occur from
when issuing a phy enable or similar via hisi_sas_control_phy(), the
subsequent HW workaround linkreset processing calls hisi_sas_control_phy(),
but this will pend the original phy reset timing out, so it is safe.

Link: https://lore.kernel.org/r/1645703489-87194-3-git-send-email-john.garry@huawei.com
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: hisi_sas: Change permission of parameter prot_mask

Currently the permission of parameter prot_mask is 0x0, which means that
the member does not appear in sysfs. Change it as other module parameters
to 0444 for world-readable.

[mkp: s/v3/v2/]

Link: https://lore.kernel.org/r/1645703489-87194-2-git-send-email-john.garry@huawei.com
Fixes: d6a9000b81be ("scsi: hisi_sas: Add support for DIF feature for v2 hw")
Reported-by: Yihang Li <liyihang6@hisilicon.com>
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla4xxx: Remove unneeded variable

Remove unneeded variable used to store return value.

Link: https://lore.kernel.org/r/20220224090735.1967816-1-deng.changcheng@zte.com.cn
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Changcheng Deng <deng.changcheng@zte.com.cn>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: aha152x: Fix aha152x_setup() __setup handler return value

__setup() handlers should return 1 if the command line option is handled
and 0 if not (or maybe never return 0; doing so just pollutes init's
environment with strings that are not init arguments/parameters).

Return 1 from aha152x_setup() to indicate that the boot option has been
handled.

Link: lore.kernel.org/r/64644a2f-4a20-bab3-1e15-3b2cdd0defe3@omprussia.ru
Link: https://lore.kernel.org/r/20220223000623.5920-1-rdunlap@infradead.org
Cc: "Juergen E. Fischer" <fischer@norbit.de>
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Reported-by: Igor Zhbanov <i.zhbanov@omprussia.ru>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: pm80xx: Handle non-fatal errors

Firmware expects host driver to clear scratchpad rsvd 0 register after
non-fatal error is found.

This is done when firmware raises fatal error interrupt and indicates
non-fatal error. At this point firmware updates scratchpad rsvd 0 register
with non-fatal error value. Here host has to clear the register after
reading it during non-fatal errors.

Rename:

 - MSGU_HOST_SCRATCH_PAD_6 to MSGU_SCRATCH_PAD_RSVD_0

 - MSGU_HOST_SCRATCH_PAD_7 to MSGU_SCRATCH_PAD_RSVD_1

Link: https://lore.kernel.org/r/20220222092618.108198-1-Ajish.Koshy@microchip.com
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Ajish Koshy <Ajish.Koshy@microchip.com>
Signed-off-by: Viswas G <Viswas.G@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: mac53c94: Stop using struct scsi_pointer

This driver doesn't use SCp.ptr to save a SCSI command data pointer which
means "scsi pointer" is a complete misnomer here. Only a few members of
struct scsi_pointer are used and the rest waste memory.  Avoid the "struct
foo { struct bar; };" silliness.

Link: https://lore.kernel.org/r/3529a59873a7de8455a27af2528341afe5069adc.1645484982.git.fthain@linux-m68k.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Finn Thain <fthain@linux-m68k.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: mesh: Stop using struct scsi_pointer

This driver doesn't use SCp.ptr to save a SCSI command data pointer which
means "scsi pointer" is a complete misnomer here. Only a few members of
struct scsi_pointer are used and the rest waste memory.  Avoid the "struct
foo { struct bar; };" silliness.

Link: https://lore.kernel.org/r/fbf930e64af5b15ca028dfe25b00fe933951f19b.1645484982.git.fthain@linux-m68k.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Finn Thain <fthain@linux-m68k.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: core: docs: Update notes about scsi_times_out

Most importantly: eh_timed_out() is not limited by scmd->allowed, and can
reset timer forever.

Fixes: c829c394165f ("[SCSI] FC transport : Avoid device offline cases by stalling aborts until device unblocked")
Link: https://lore.kernel.org/r/20220219001601.3534043-1-khazhy@google.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Khazhismel Kumykov <khazhy@google.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: message: fusion: Use GFP_KERNEL instead of GFP_ATOMIC in non-atomic context

Just a few lines below this kzalloc() we have a mutex_lock() which can
sleep.

Moreover, the only way to call this function is when a delayed work is
schedule. And delayed work can sleep:

  INIT_DELAYED_WORK(&fw_event->work, mptsas_firmware_event_work);
    --> mptsas_firmware_event_work()
      --> mptsas_send_link_status_event()
        --> mptsas_expander_add()

So there is really no good reason to use GFP_ATOMIC here. Change it to
GFP_KERNEL to give more opportunities to the kernel.

Link: https://lore.kernel.org/r/eccb2179ce800529851ed4fabc9d3f95fbbf7d7f.1644906731.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: libfc: Replace one-element arrays with flexible-array members

Use flexible-array members in struct fc_fdmi_attr_entry and fs_fdmi_attrs
instead of one-element arrays, and refactor the code accordingly.

Also, this helps with the ongoing efforts to globally enable -Warray-bounds
and get us closer to being able to tighten the FORTIFY_SOURCE routines on
memcpy().

https://github.com/KSPP/linux/issues/79
https://github.com/ClangBuiltLinux/linux/issues/1590

Link: https://lore.kernel.org/r/20220214223903.GA859464@embeddedor
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: pm8001: Fix pm8001_info() message format

Make the driver messages more readable by adding a space after the message
prefix ":" and removing the extra space between function name and line
number.

Link: https://lore.kernel.org/r/20220220031810.738362-32-damien.lemoal@opensource.wdc.com
Reviewed-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: pm8001: Improve pm80XX_send_abort_all()

Both pm8001_send_abort_all() and pm80xx_send_abort_all() are called only
for a non null device with the NCQ_READ_LOG_FLAG set, so remove the device
check on entry of these functions. Furthermore, setting the
NCQ_ABORT_ALL_FLAG device id flag and clearing the NCQ_READ_LOG_FLAG is
always done before calling these functions. Move these operations inside
the functions.

Link: https://lore.kernel.org/r/20220220031810.738362-31-damien.lemoal@opensource.wdc.com
Reviewed-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: pm8001: Simplify pm8001_ccb_task_free()

The task argument of the pm8001_ccb_task_free() function can be inferred
from the ccb argument ccb_task field. So there is no need to have this
argument. Likewise, the ccb_index argument is always equal to the ccb tag
field and is not needed either. Remove both arguments and update all call
sites. The pm8001_ccb_task_free_done() helper is also modified to match
this change.

Link: https://lore.kernel.org/r/20220220031810.738362-30-damien.lemoal@opensource.wdc.com
Reviewed-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: pm8001: Simplify pm8001_task_exec()

The main part of the pm8001_task_exec() function uses a do {} while(0) loop
that is useless and only makes the code harder to read. Remove this
loop. The unnecessary local variable t is also removed.

Additionally, avoid repeatedly declaring "struct task_status_struct *ts" to
handle error cases by declaring this variable for the entire function
scope. This allows simplifying the error cases, and together with the
addition of blank lines make the code more readable.

Finally, handling of the running_req counter is fixed to avoid decrementing
it without a corresponding incrementation in the case of an invalid task
protocol.

Link: https://lore.kernel.org/r/20220220031810.738362-29-damien.lemoal@opensource.wdc.com
Reviewed-by: John Garry <john.garry@huawei.com>
Reviewed-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: pm8001: Simplify pm8001_mpi_build_cmd() interface

There is no need to pass a pointer to a struct inbound_queue_table to
pm8001_mpi_build_cmd(). Passing the start index in the inbound queue table
of the adapter is enough. This change allows avoiding the declaration of a
struct inbound_queue_table pointer (circularQ variables) in many functions,
simplifying the code.

While at it, blank lines are added i(e.g. after local variable
declarations) to make the code more readable.

Link: https://lore.kernel.org/r/20220220031810.738362-28-damien.lemoal@opensource.wdc.com
Reviewed-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: pm8001: Introduce ccb alloc/free helpers

Introduce the pm8001_ccb_alloc() and pm8001_ccb_free() helpers to replace
the typical code patterns:

res = pm8001_tag_alloc(pm8001_ha, &ccb_tag);
if (res)
...
ccb = &pm8001_ha->ccb_info[ccb_tag];
ccb->device = pm8001_ha_dev;
ccb->ccb_tag = ccb_tag;
ccb->task = task;
ccb->n_elem = 0;

and

ccb->task = NULL;
ccb->ccb_tag = PM8001_INVALID_TAG;
pm8001_tag_free(pm8001_ha, tag);

With the simpler function calls:

ccb = pm8001_ccb_alloc(pm8001_ha, pm8001_ha_dev, task);
if (!ccb)
...

and

pm8001_ccb_free(pm8001_ha, ccb);

The pm8001_ccb_alloc() helper ensures that all fields of the ccb info
structure for the newly allocated tag are all initialized, except the
buf_prd field. The pm8001_ccb_free() helper clears the initialized fields
and the ccb tag to ensure that iteration over the adapter ccb_info array
detects ccbs that are in use.

All call site of the pm8001_tag_alloc() function that use a ccb info
associated with an allocated tag are converted to use the new helpers.

Link: https://lore.kernel.org/r/20220220031810.738362-27-damien.lemoal@opensource.wdc.com
Reviewed-by: John Garry <john.garry@huawei.com>
Reviewed-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: pm8001: Simplify pm8001_get_ncq_tag()

To detect if a command is NCQ, there is no need to test all possible NCQ
command codes. Instead, use ata_is_ncq() to test the command protocol.

Link: https://lore.kernel.org/r/20220220031810.738362-26-damien.lemoal@opensource.wdc.com
Reviewed-by: John Garry <john.garry@huawei.com>
Reviewed-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: pm8001: Cleanup pm8001_exec_internal_task_abort()

Replace the goto statement in the for loop with "break" and remove the
ex_err label. Also fix long lines, identation and blank lines to make the
code more readable.

Link: https://lore.kernel.org/r/20220220031810.738362-25-damien.lemoal@opensource.wdc.com
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: libsas: Simplify sas_ata_qc_issue() detection of NCQ commands

To detect if a command is NCQ, there is no need to test all possible NCQ
command codes. Instead, use ata_is_ncq() to test the command protocol.

Link: https://lore.kernel.org/r/20220220031810.738362-24-damien.lemoal@opensource.wdc.com
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: pm8001: Fix memory leak in pm8001_chip_fw_flash_update_req()

In pm8001_chip_fw_flash_update_build(), if
pm8001_chip_fw_flash_update_build() fails, the struct fw_control_ex
allocated must be freed.

Link: https://lore.kernel.org/r/20220220031810.738362-23-damien.lemoal@opensource.wdc.com
Reviewed-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: pm8001: Fix tag leaks on error

In pm8001_chip_set_dev_state_req(), pm8001_chip_fw_flash_update_req(),
pm80xx_chip_phy_ctl_req() and pm8001_chip_reg_dev_req() add missing calls
to pm8001_tag_free() to free the allocated tag when pm8001_mpi_build_cmd()
fails.

Similarly, in pm8001_exec_internal_task_abort(), if the chip ->task_abort
method fails, the tag allocated for the abort request task must be
freed. Add the missing call to pm8001_tag_free().

Link: https://lore.kernel.org/r/20220220031810.738362-22-damien.lemoal@opensource.wdc.com
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: pm8001: Fix task leak in pm8001_send_abort_all()

In pm8001_send_abort_all(), make sure to free the allocated sas task
if pm8001_tag_alloc() or pm8001_mpi_build_cmd() fail.

Link: https://lore.kernel.org/r/20220220031810.738362-21-damien.lemoal@opensource.wdc.com
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: pm8001: Fix tag values handling

The function pm8001_tag_alloc() determines free tags using the function
find_first_zero_bit() which can return 0 when the first bit of the bitmap
being inspected is 0. As such, tag 0 is a valid tag value that should not
be dismissed as invalid. Fix the functions pm8001_work_fn(),
mpi_sata_completion(), pm8001_mpi_task_abort_resp() and
pm8001_open_reject_retry() to not dismiss 0 tags as invalid.

The value 0xffffffff is used for invalid tags for unused ccb information
structures. Add the macro definition PM8001_INVALID_TAG to define this
value.

Link: https://lore.kernel.org/r/20220220031810.738362-20-damien.lemoal@opensource.wdc.com
Reviewed-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: pm8001: Fix pm8001_mpi_task_abort_resp()

The call to pm8001_ccb_task_free() at the end of
pm8001_mpi_task_abort_resp() already frees the ccb tag. So when the device
NCQ_ABORT_ALL_FLAG is set, the tag should not be freed again.  Also change
the hardcoded 0xBFFFFFFF value to ~NCQ_ABORT_ALL_FLAG as it ought to be.

Link: https://lore.kernel.org/r/20220220031810.738362-19-damien.lemoal@opensource.wdc.com
Reviewed-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: pm8001: Fix pm8001_tag_alloc() failures handling

In mpi_set_phy_profile_req() and in pm8001_set_phy_profile_single(), if
pm8001_tag_alloc() fails to allocate a new tag, a warning message is issued
but the uninitialized tag variable is still used to build a command. Avoid
this by returning early in case of tag allocation failure.

Also make sure to always return the error code returned by
pm8001_tag_alloc() when this function fails instead of an arbitrary value.

Link: https://lore.kernel.org/r/20220220031810.738362-18-damien.lemoal@opensource.wdc.com
Reviewed-by: John Garry <john.garry@huawei.com>
Reviewed-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: pm8001: Fix abort all task initialization

In pm80xx_send_abort_all(), the n_elem field of the ccb used is not
initialized to 0. This missing initialization sometimes lead to the task
completion path seeing the ccb with a non-zero n_elem resulting in the
execution of invalid dma_unmap_sg() calls in pm8001_ccb_task_free(),
causing a crash such as:

[  197.676341] RIP: 0010:iommu_dma_unmap_sg+0x6d/0x280
[  197.700204] RSP: 0018:ffff889bbcf89c88 EFLAGS: 00010012
[  197.705485] RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffffffff83d0bda0
[  197.712687] RDX: 0000000000000002 RSI: 0000000000000000 RDI: ffff88810dffc0d0
[  197.719887] RBP: 0000000000000000 R08: 0000000000000000 R09: ffff8881c790098b
[  197.727089] R10: ffffed1038f20131 R11: 0000000000000001 R12: 0000000000000000
[  197.734296] R13: ffff88810dffc0d0 R14: 0000000000000010 R15: 0000000000000000
[  197.741493] FS:  0000000000000000(0000) GS:ffff889bbcf80000(0000) knlGS:0000000000000000
[  197.749659] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  197.755459] CR2: 00007f16c1b42734 CR3: 0000000004814000 CR4: 0000000000350ee0
[  197.762656] Call Trace:
[  197.765127]  <IRQ>
[  197.767162]  pm8001_ccb_task_free+0x5f1/0x820 [pm80xx]
[  197.772364]  ? do_raw_spin_unlock+0x54/0x220
[  197.776680]  pm8001_mpi_task_abort_resp+0x2ce/0x4f0 [pm80xx]
[  197.782406]  process_oq+0xe85/0x7890 [pm80xx]
[  197.786817]  ? lock_acquire+0x194/0x490
[  197.790697]  ? handle_irq_event+0x10e/0x1b0
[  197.794920]  ? mpi_sata_completion+0x2d70/0x2d70 [pm80xx]
[  197.800378]  ? __wake_up_bit+0x100/0x100
[  197.804340]  ? lock_is_held_type+0x98/0x110
[  197.808565]  pm80xx_chip_isr+0x94/0x130 [pm80xx]
[  197.813243]  tasklet_action_common.constprop.0+0x24b/0x2f0
[  197.818785]  __do_softirq+0x1b5/0x82d
[  197.822485]  ? do_raw_spin_unlock+0x54/0x220
[  197.826799]  __irq_exit_rcu+0x17e/0x1e0
[  197.830678]  irq_exit_rcu+0xa/0x20
[  197.834114]  common_interrupt+0x78/0x90
[  197.840051]  </IRQ>
[  197.844236]  <TASK>
[  197.848397]  asm_common_interrupt+0x1e/0x40

Avoid this issue by always initializing the ccb n_elem field to 0 in
pm8001_send_abort_all(), pm8001_send_read_log() and
pm80xx_send_abort_all().

Link: https://lore.kernel.org/r/20220220031810.738362-17-damien.lemoal@opensource.wdc.com
Fixes: c6b9ef5779c3 ("[SCSI] pm80xx: NCQ error handling changes")
Reviewed-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: pm8001: Fix NCQ NON DATA command completion handling

NCQ NON DATA is an NCQ command with the DMA_NONE DMA direction and so a
register-device-to-host-FIS response is expected for it.

However, for an IO_SUCCESS case, mpi_sata_completion() expects a
set-device-bits-FIS for any ata task with an use_ncq field true, which
includes NCQ NON DATA commands.

Fix this to correctly treat NCQ NON DATA commands as non-data by also
testing for the DMA_NONE DMA direction.

Link: https://lore.kernel.org/r/20220220031810.738362-16-damien.lemoal@opensource.wdc.com
Fixes: dbf9bfe61571 ("[SCSI] pm8001: add SAS/SATA HBA driver")
Reviewed-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: pm8001: Fix NCQ NON DATA command task initialization

In the pm8001_chip_sata_req() and pm80xx_chip_sata_req() functions, all
tasks with a DMA direction of DMA_NONE (no data transfer) are initialized
using the ATAP value 0x04. However, NCQ NON DATA commands, while being
DMA_NONE commands are NCQ commands and need to be initialized using the
value 0x07 for ATAP, similarly to other NCQ commands.

Make sure that NCQ NON DATA command tasks are initialized similarly to
other NCQ commands by also testing the task "use_ncq" field in addition to
the DMA direction. While at it, reorganize the code into a chain of if -
else if - else to avoid useless affectations and debug messages.

Link: https://lore.kernel.org/r/20220220031810.738362-15-damien.lemoal@opensource.wdc.com
Fixes: dbf9bfe61571 ("[SCSI] pm8001: add SAS/SATA HBA driver")
Reviewed-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: pm8001: Remove local variable in pm8001_pci_resume()

In pm8001_pci_resume(), the use of the u32 type for the local variable
device_state causes a sparse warning:

warning: incorrect type in assignment (different base types)
    expected unsigned int [usertype] device_state
    got restricted pci_power_t [usertype] current_state

Since this variable is used only once in the function, remove it and use
pdev->current_state directly. While at it, also add a blank line after the
last local variable declaration.

Link: https://lore.kernel.org/r/20220220031810.738362-14-damien.lemoal@opensource.wdc.com
Reviewed-by: John Garry <john.garry@huawei.com>
Reviewed-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: pm8001: Fix use of struct set_phy_profile_req fields

In mpi_set_phy_profile_req() and pm8001_set_phy_profile_single(), use
cpu_to_le32() to initialize the ppc_phyid field of struct
set_phy_profile_req. Furthermore, fix the definition of the reserved field
of this structure to be an array of __le32, to match the use of
cpu_to_le32() when assigning values. These changes remove several sparse
type warnings.

Link: https://lore.kernel.org/r/20220220031810.738362-13-damien.lemoal@opensource.wdc.com
Reviewed-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: pm8001: Fix le32 values handling in pm80xx_chip_sata_req()

Make sure that the __le32 fields of struct sata_cmd are manipulated after
applying the correct endian conversion. That is, use cpu_to_le32() for
assigning values and le32_to_cpu() for consulting a field value.  In
particular, make sure that the calculations for the 4G boundary check are
done using CPU endianness and *not* little endian values. With these fixes,
many sparse warnings are removed.

While at it, fix some code identation and add blank lines after variable
declarations and in some other places to make this code more readable.

Link: https://lore.kernel.org/r/20220220031810.738362-12-damien.lemoal@opensource.wdc.com
Fixes: 0ecdf00ba6e5 ("[SCSI] pm80xx: 4G boundary fix.")
Reviewed-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: pm8001: Fix le32 values handling in pm80xx_chip_ssp_io_req()

Make sure that the __le32 fields of struct ssp_ini_io_start_req are
manipulated after applying the correct endian conversion. That is, use
cpu_to_le32() for assigning values and le32_to_cpu() for consulting a field
value. In particular, make sure that the calculations for the 4G boundary
check are done using CPU endianness and *not* little endian values. With
these fixes, many sparse warnings are removed.

While at it, add blank lines after variable declarations and in some other
places to make this code more readable.

Link: https://lore.kernel.org/r/20220220031810.738362-11-damien.lemoal@opensource.wdc.com
Fixes: 0ecdf00ba6e5 ("[SCSI] pm80xx: 4G boundary fix.")
Reviewed-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: pm8001: Fix payload initialization in pm80xx_encrypt_update()

All fields of the kek_mgmt_req structure have the type __le32. So make sure
to use cpu_to_le32() to initialize them. This suppresses the sparse
warning:

warning: incorrect type in assignment (different base types)
   expected restricted __le32 [addressable] [assigned] [usertype] new_curidx_ksop
   got int

Link: https://lore.kernel.org/r/20220220031810.738362-10-damien.lemoal@opensource.wdc.com
Fixes: f5860992db55 ("[SCSI] pm80xx: Added SPCv/ve specific hardware functionalities and relevant changes in common files")
Reviewed-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: pm8001: Fix le32 values handling in pm80xx_set_sas_protocol_timer_config()

All fields of the SASProtocolTimerConfig structure have the __le32 type.
As such, use cpu_to_le32() to initialize them. This change suppresses many
sparse warnings:

warning: incorrect type in assignment (different base types)
   expected restricted __le32 [addressable] [usertype] pageCode
   got int

Note that the check to limit the value of the STP_IDLE_TMO field is removed
as this field is initialized using the fixed (and small) value defined by
the STP_IDLE_TIME macro.

The pm8001_dbg() calls printing the values of the SASProtocolTimerConfig
structure fileds are changed to use le32_to_cpu() to present the values in
human readable form.

Link: https://lore.kernel.org/r/20220220031810.738362-9-damien.lemoal@opensource.wdc.com
Fixes: a6cb3d012b98 ("[SCSI] pm80xx: thermal, sas controller config and error handling update")
Reviewed-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: pm8001: Fix payload initialization in pm80xx_set_thermal_config()

The fields of the set_ctrl_cfg_req structure have the __le32 type, so use
cpu_to_le32() to assign them. This removes the sparse warnings:

warning: incorrect type in assignment (different base types)
    expected restricted __le32
    got unsigned int

Link: https://lore.kernel.org/r/20220220031810.738362-8-damien.lemoal@opensource.wdc.com
Fixes: 842784e0d15b ("pm80xx: Update For Thermal Page Code")
Fixes: f5860992db55 ("[SCSI] pm80xx: Added SPCv/ve specific hardware functionalities and relevant changes in common files")
Reviewed-by: John Garry <john.garry@huawei.com>
Reviewed-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: pm8001: Fix command initialization in pm8001_chip_ssp_tm_req()

The ds_ads_m field of struct ssp_ini_tm_start_req has the type __le32.
Assigning a value to it should thus use cpu_to_le32(). This fixes the
sparse warning:

warning: incorrect type in assignment (different base types)
   expected restricted __le32 [addressable] [assigned] [usertype] ds_ads_m
   got int

Link: https://lore.kernel.org/r/20220220031810.738362-7-damien.lemoal@opensource.wdc.com
Fixes: dbf9bfe61571 ("[SCSI] pm8001: add SAS/SATA HBA driver")
Reviewed-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: pm8001: Fix pm80xx_pci_mem_copy() interface

The declaration of the local variable destination1 in pm80xx_pci_mem_copy()
as a pointer to a u32 results in the sparse warning:

warning: incorrect type in assignment (different base types)
    expected unsigned int [usertype]
    got restricted __le32 [usertype]

Furthermore, the destination" argument of pm80xx_pci_mem_copy() is wrongly
declared with the const attribute.

Fix both problems by changing the type of the "destination" argument to
"__le32 *" and use this argument directly inside the pm80xx_pci_mem_copy()
function, thus removing the need for the destination1 local variable.

Link: https://lore.kernel.org/r/20220220031810.738362-6-damien.lemoal@opensource.wdc.com
Reviewed-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: pm8001: Fix command initialization in pm80XX_send_read_log()

Since the sata_cmd struct is zeroed out before its fields are initialized,
there is no need for using "|=" to initialize the ncqtag_atap_dir_m
field. Using a standard assignment removes the sparse warning:

warning: invalid assignment: |=

Also, since the ncqtag_atap_dir_m field has type __le32, use cpu_to_le32()
to generate the assigned value.

Link: https://lore.kernel.org/r/20220220031810.738362-5-damien.lemoal@opensource.wdc.com
Fixes: c6b9ef5779c3 ("[SCSI] pm80xx: NCQ error handling changes")
Reviewed-by: John Garry <john.garry@huawei.com>
Reviewed-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: pm8001: Fix pm8001_update_flash() local variable type

Change the type of partitionSizeTmp from u32 to __be32 to suppress the
sparse warning:

warning: cast to restricted __be32

Link: https://lore.kernel.org/r/20220220031810.738362-4-damien.lemoal@opensource.wdc.com
Reviewed-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: pm8001: Fix __iomem pointer use in pm8001_phy_control()

Avoid the sparse warning "warning: cast removes address space '__iomem' of
expression" by declaring the qp pointer as "u32 __iomem *".  Accordingly,
change the accesses to the qp array to use readl().

Link: https://lore.kernel.org/r/20220220031810.738362-3-damien.lemoal@opensource.wdc.com
Reviewed-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: libsas: Fix sas_ata_qc_issue() handling of NCQ NON DATA commands

To detect for the DMA_NONE (no data transfer) DMA direction,
sas_ata_qc_issue() tests if the command protocol is ATA_PROT_NODATA.  This
test does not include the ATA_CMD_NCQ_NON_DATA command as this command
protocol is defined as ATA_PROT_NCQ_NODATA (equal to ATA_PROT_FLAG_NCQ) and
not as ATA_PROT_NODATA.

To include both NCQ and non-NCQ commands when testing for the DMA_NONE DMA
direction, use "!ata_is_data()".

Link: https://lore.kernel.org/r/20220220031810.738362-2-damien.lemoal@opensource.wdc.com
Fixes: 176ddd89171d ("scsi: libsas: Reset num_scatter if libata marks qc as NODATA")
Cc: stable@vger.kernel.org
Reviewed-by: John Garry <john.garry@huawei.com>
Reviewed-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: hisi_sas: Remove unnecessary print function dev_err()

The print function dev_err() is redundant because platform_get_irq()
already prints an error.

Eliminate the follow coccicheck warnings:
./drivers/scsi/hisi_sas/hisi_sas_v1_hw.c:1661:3-10: line 1661 is
redundant because platform_get_irq() already prints an error
./drivers/scsi/hisi_sas/hisi_sas_v1_hw.c:1642:4-11: line 1642 is
redundant because platform_get_irq() already prints an error
./drivers/scsi/hisi_sas/hisi_sas_v1_hw.c:1679:3-10: line 1679 is
redundant because platform_get_irq() already prints an error

Link: https://lore.kernel.org/r/20220215020524.44268-1-yang.lee@linux.alibaba.com
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Acked-by: John Garry <john.garry@huawei.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: block: Remove REQ_OP_WRITE_SAME support

No more users of REQ_OP_WRITE_SAME or drivers implementing it are left,
so remove the infrastructure.

[mkp: fold in and tweak sysfs reporting fix]

Link: https://lore.kernel.org/r/20220209082828.2629273-8-hch@lst.de
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: dm: Remove WRITE_SAME support

There are no more end-users of REQ_OP_WRITE_SAME left, so we can start
deleting it.

Link: https://lore.kernel.org/r/20220209082828.2629273-7-hch@lst.de
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: md: Remove WRITE_SAME support

There are no more end-users of REQ_OP_WRITE_SAME left, so we can start
deleting it.

Link: https://lore.kernel.org/r/20220209082828.2629273-6-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: sd: Remove WRITE_SAME support

There are no more end-users of REQ_OP_WRITE_SAME left, so we can start
deleting it.

Link: https://lore.kernel.org/r/20220209082828.2629273-5-hch@lst.de
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: rnbd: Remove WRITE_SAME support

REQ_OP_WRITE_SAME was only ever submitted by the legacy Linux zeroing code,
which has switched to use REQ_OP_WRITE_ZEROES long before rnbd was even
merged.

Link: https://lore.kernel.org/r/20220209082828.2629273-4-hch@lst.de
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: drbd: Remove WRITE_SAME support

REQ_OP_WRITE_SAME was only ever submitted by the legacy Linux zeroing code,
which has switched to use REQ_OP_WRITE_ZEROES long ago.

Link: https://lore.kernel.org/r/20220209082828.2629273-3-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: cxlflash: Query write_zeroes limit for zeroing

The write_same and write_zeroes limits for SCSI are effectively the same,
so the current code works just fine.  But we plan to remove
REQ_OP_WRITE_SAME support, so switch to querying the write zeroes limit for
a zeroing WRITE SAME operation.

Link: https://lore.kernel.org/r/20220209082828.2629273-2-hch@lst.de
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: mpi3mr: Fix flushing !WQ_MEM_RECLAIM events warning

Fix the following warning by not allocating driver's event handling worker
queue with WQ_MEM_RECLAIM flag enabled:

workqueue: WQ_MEM_RECLAIM
mpi3mr_fwevt_worker [mpi3mr] is flushing !WQ_MEM_RECLAIM events

Link: https://lore.kernel.org/r/20220218180515.27455-1-sreekanth.reddy@broadcom.com
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: target: tcmu: Make cmd_ring_size changeable via configfs

Make cmd_ring_size changeable similar to the way it is done for
max_data_area_mb. The reason is that our tcmu client will create thousands
of tcmu instances, and this will consume lots of mem with default 8Mb cmd
ring size for every backstore.

One can change the value by typing:

    echo "cmd_ring_size_mb=N" > control

The "N" is a integer between 1 to 8, if set 1, the cmd ring can hold about
6k cmds(tcmu_cmd_entry about 176 byte) at least.

The value is printed when doing:

    cat info

In addition, a new readonly attribute 'cmd_ring_size_mb' returns the value
in read.

Link: https://lore.kernel.org/r/1644978109-14885-1-git-send-email-kanie@linux.alibaba.com
Reviewed-by: Xiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Reviewed-by: Bodo Stroesser <bostroesser@gmail.com>
Signed-off-by: Guixin Liu <kanie@linux.alibaba.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Use named initializers for q_dev_state

Make q_dev_state a little more readable and maintainable by using named
initializers.

Also convert QLA8XXX_DEV_* macros into an enum and remove
qla83xx_dev_state_to_string(), which is a duplicate of qdev_state().

Link: https://lore.kernel.org/r/AS8PR10MB495298515A7553C8D6D6E74D9D349@AS8PR10MB4952.EURPRD10.PROD.OUTLOOK.COM
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Gleb Chesnokov <Chesnokov.G@raidix.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Use named initializers for port_[d]state_str

Make port_state_str and port_dstate_str a little more readable and
maintainable by using named initializers.

Also convert FCS_* macros into an enum.

Link: https://lore.kernel.org/r/AS8PR10MB495215841EB25C16DBC0CB409D349@AS8PR10MB4952.EURPRD10.PROD.OUTLOOK.COM
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Gleb Chesnokov <Chesnokov.G@raidix.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: ufs: core: Remove wlun_dev_to_hba()

Commit edc0596cc04b ("scsi: ufs: core: Stop clearing UNIT ATTENTIONS")
removed all callers of wlun_dev_to_hba(). Hence also remove the macro
itself.

Link: https://lore.kernel.org/r/1891546521.01644927481711.JavaMail.epsvc@epcpadp4
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Keoseong Park <keosung.park@samsung.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: core: Remove struct scsi_pointer from struct scsi_cmnd

Remove struct scsi_pointer from struct scsi_cmnd since the previous patches
removed all users of that member of struct scsi_cmnd. Additionally, reorder
the members of struct scsi_cmnd such that the statement that the field
below can be modified by the SCSI LLD is again correct.

Link: https://lore.kernel.org/r/20220218195117.25689-50-bvanassche@acm.org
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: zalon: Stop using the SCSI pointer

Set .cmd_size in the SCSI host template instead of using the SCSI pointer
from struct scsi_cmnd. This patch prepares for removal of the SCSI pointer
from struct scsi_cmnd.

Link: https://lore.kernel.org/r/20220218195117.25689-49-bvanassche@acm.org
Cc: Helge Deller <deller@gmx.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: wd33c93: Move the SCSI pointer to private command data

Set .cmd_size in the SCSI host template instead of using the SCSI pointer
from struct scsi_cmnd. This patch prepares for removal of the SCSI pointer
from struct scsi_cmnd.

Link: https://lore.kernel.org/r/20220218195117.25689-48-bvanassche@acm.org
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: wd719x: Stop using the SCSI pointer

Move the DMA handle into the per-command private data instead of using the
SCSI pointer from struct scsi_cmnd. This patch prepares for removal of the
SCSI pointer from struct scsi_cmnd.

Link: https://lore.kernel.org/r/20220218195117.25689-47-bvanassche@acm.org
Cc: Ondrej Zary <linux@zary.sk>
Cc: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: usb: Stop using the SCSI pointer

Set scsi_host_template.cmd_size instead of using the SCSI pointer for
storing driver-private data. Change the type of the argument of
uas_add_work() from struct uas_cmd_info * into struct scsi_cmnd * because
it is easier to convert a SCSI command pointer into a uas_cmd_info pointer
than the other way around.

This patch prepares for removal of the SCSI pointer from struct scsi_cmnd.

Link: https://lore.kernel.org/r/20220218195117.25689-46-bvanassche@acm.org
Cc: linux-usb@vger.kernel.org
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: sym53c8xx_2: Move the SCSI pointer to private command data

Set .cmd_size in the SCSI host template instead of using the SCSI pointer
from struct scsi_cmnd. This patch prepares for removal of the SCSI pointer
from struct scsi_cmnd.

Link: https://lore.kernel.org/r/20220218195117.25689-45-bvanassche@acm.org
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: smartpqi: Stop using the SCSI pointer

Set .cmd_size in the SCSI host template instead of using the SCSI pointer
from struct scsi_cmnd. This patch prepares for removal of the SCSI pointer
from struct scsi_cmnd.

Link: https://lore.kernel.org/r/20220218195117.25689-44-bvanassche@acm.org
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla2xxx: Stop using the SCSI pointer

Instead of using the SCp.ptr field to track whether or not a command is
in flight, use the sp->type field to track this information. sp->type
must be set for proper operation of the qla2xxx driver. See e.g. the
switch (sp->type) statement in qla2x00_ct_entry().

This patch prepares for removal of the SCSI pointer from struct scsi_cmnd.

Link: https://lore.kernel.org/r/20220218195117.25689-43-bvanassche@acm.org
Cc: Nilesh Javali <njavali@marvell.com>
Cc: Ewan D. Milne <emilne@redhat.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qla1280: Move the SCSI pointer to private command data

Set .cmd_size in the SCSI host template instead of using the SCSI pointer
from struct scsi_cmnd. This patch prepares for removal of the SCSI pointer
from struct scsi_cmnd.

Link: https://lore.kernel.org/r/20220218195117.25689-42-bvanassche@acm.org
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: ppa: Move the SCSI pointer to private command data

Set .cmd_size in the SCSI host template instead of using the SCSI pointer
from struct scsi_cmnd. This patch prepares for removal of the SCSI pointer
from struct scsi_cmnd.

Link: https://lore.kernel.org/r/20220218195117.25689-41-bvanassche@acm.org
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: sym53c500_cs: Move the SCSI pointer to private command data

Set .cmd_size in the SCSI host template instead of using the SCSI pointer
from struct scsi_cmnd.
This patch prepares for removal of the SCSI pointer from struct scsi_cmnd.

Link: https://lore.kernel.org/r/20220218195117.25689-40-bvanassche@acm.org
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: nsp_cs: Move the SCSI pointer to private command data

Set .cmd_size in the SCSI host template instead of using the SCSI pointer
in struct scsi_cmnd.
This patch prepares for removal of the SCSI pointer from struct scsi_cmnd.

Link: https://lore.kernel.org/r/20220218195117.25689-39-bvanassche@acm.org
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: nsp32: Stop using the SCSI pointer

Move the SCSI status field to private data. Stop setting the .ptr,
.this_residual, .buffer and .buffer_residual SCSI pointer members
since no code in this driver reads these members.

This patch prepares for removal of the SCSI pointer from struct scsi_cmnd.

Link: https://lore.kernel.org/r/20220218195117.25689-38-bvanassche@acm.org
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Masanori Goto <gotom@debian.or.jp>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: mvumi: Stop using the SCSI pointer

Set .cmd_size in the SCSI host template instead of using the SCSI pointer
from struct scsi_cmnd. This patch prepares for removal of the SCSI pointer
from struct scsi_cmnd.

Link: https://lore.kernel.org/r/20220218195117.25689-37-bvanassche@acm.org
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: mvsas: Fix a set-but-not-used warning

This patch fixes the following compiler warning:

drivers/scsi/mvsas/mv_init.c: In function ‘mvs_pci_init’:
drivers/scsi/mvsas/mv_init.c:497:30: warning: variable ‘mpi’ set but not used [-Wunused-but-set-variable]
  497 |         struct mvs_prv_info *mpi;
      |                              ^~~

Link: https://lore.kernel.org/r/20220218195117.25689-36-bvanassche@acm.org
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: mesh: Move the SCSI pointer to private command data

Set .cmd_size in the SCSI host template instead of using the SCSI pointer
from struct scsi_cmnd. This patch prepares for removal of the SCSI pointer
from struct scsi_cmnd.

Link: https://lore.kernel.org/r/20220218195117.25689-35-bvanassche@acm.org
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: megasas: Stop using the SCSI pointer

Set .cmd_size in the SCSI host template instead of using the SCSI pointer
from struct scsi_cmnd. This patch prepares for removal of the SCSI pointer
from struct scsi_cmnd.

Link: https://lore.kernel.org/r/20220218195117.25689-34-bvanassche@acm.org
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: megaraid: Stop using the SCSI pointer

Set .cmd_size in the SCSI host template instead of using the SCSI pointer
from struct scsi_cmnd. This patch prepares for removal of the SCSI pointer
from struct scsi_cmnd.

Link: https://lore.kernel.org/r/20220218195117.25689-33-bvanassche@acm.org
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: mac53c94: Move the SCSI pointer to private command data

Set .cmd_size in the SCSI host template instead of using the SCSI pointer
from struct scsi_cmnd. This patch prepares for removal of the SCSI pointer
from struct scsi_cmnd.

Link: https://lore.kernel.org/r/20220218195117.25689-32-bvanassche@acm.org
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: mac53c94: Fix a set-but-not-used compiler warning

Fix the following compiler warning:

   drivers/scsi/mac53c94.c: In function 'mac53c94_init':
   drivers/scsi/mac53c94.c:128:13: warning: variable 'x' set but not used [-Wunused-but-set-variable]
     128 |         int x;

Link: https://lore.kernel.org/r/20220218195117.25689-31-bvanassche@acm.org
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: qedf: Stop using the SCSI pointer

Set .cmd_size in the SCSI host template instead of using the SCSI pointer
from struct scsi_cmnd. Remove the CMD_SCSI_STATUS() assignment because the
assigned value is not used.

This patch prepares for removal of the SCSI pointer from struct scsi_cmnd.

Link: https://lore.kernel.org/r/20220218195117.25689-30-bvanassche@acm.org
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: bnx2fc: Stop using the SCSI pointer

Set .cmd_size in the SCSI host template instead of using the SCSI pointer
from struct scsi_cmnd. Remove the CMD_SCSI_STATUS() assignment because the
assigned value is not used.

This patch prepares for removal of the SCSI pointer from struct scsi_cmnd.

Link: https://lore.kernel.org/r/20220218195117.25689-29-bvanassche@acm.org
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: libfc: Stop using the SCSI pointer

Move the fc_fcp_pkt pointer, the residual length and the SCSI status into
the new data structure libfc_cmd_priv. This patch prepares for removal of
the SCSI pointer from struct scsi_cmnd.

The user of the libfc data path functions have been identified as follows:
$ git grep -lw fc_queuecommand | grep -v scsi/libfc/
drivers/scsi/fcoe/fcoe.c

Link: https://lore.kernel.org/r/20220218195117.25689-28-bvanassche@acm.org
Cc: Saurav Kashyap <skashyap@marvell.com>
Cc: Javed Hasan <jhasan@marvell.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: initio: Stop using the SCSI pointer

Set .cmd_size in the SCSI host template instead of using the SCSI pointer
from struct scsi_cmnd. This patch prepares for removal of the SCSI pointer
from struct scsi_cmnd.

Link: https://lore.kernel.org/r/20220218195117.25689-27-bvanassche@acm.org
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: iscsi: Stop using the SCSI pointer

Instead of storing the iSCSI task pointer and the session age in the SCSI
pointer, use command-private variables. This patch prepares for removal of
the SCSI pointer from struct scsi_cmnd.

The list of iSCSI drivers has been obtained as follows:
$ git grep -lw iscsi_host_alloc
drivers/infiniband/ulp/iser/iscsi_iser.c
drivers/scsi/be2iscsi/be_main.c
drivers/scsi/bnx2i/bnx2i_iscsi.c
drivers/scsi/cxgbi/libcxgbi.c
drivers/scsi/iscsi_tcp.c
drivers/scsi/libiscsi.c
drivers/scsi/qedi/qedi_main.c
drivers/scsi/qla4xxx/ql4_os.c
include/scsi/libiscsi.h

Note: it is not clear to me how the qla4xxx driver can work without this
patch since it uses the scsi_cmnd::SCp.ptr member for two different
purposes:
- The qla4xxx driver uses this member to store a struct srb pointer.
- libiscsi uses this member to store a struct iscsi_task pointer.

Reviewed-by: Lee Duncan <lduncan@suse.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Cc: Chris Leech <cleech@redhat.com>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Nilesh Javali <njavali@marvell.com>
Cc: Manish Rangankar <mrangankar@marvell.com>
Cc: Karen Xie <kxie@chelsio.com>
Cc: Ketan Mukadam <ketan.mukadam@broadcom.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
iscsi

Link: https://lore.kernel.org/r/20220218195117.25689-26-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

scsi: imm: Move the SCSI pointer to private command data

Set .cmd_size in the SCSI host template instead of using the SCSI pointer.
This patch prepares for removal of the SCSI pointer from struct scsi_cmnd.

Link: https://lore.kernel.org/r/20220218195117.25689-25-bvanassche@acm.org
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>