Enrico Jorns [Wed, 28 Jan 2015 11:07:58 +0000 (12:07 +0100)]
gstv4l2transform: format fixation for preferring passthrough
* If outgoing format is unfixated, try to set it to input format.
* Call gst_caps_fixate () at end of fixation routine
https://bugzilla.gnome.org/show_bug.cgi?id=766719
Philipp Zabel [Fri, 20 May 2016 10:49:53 +0000 (12:49 +0200)]
v4l2transform: allow to change pixel aspect ratio
Scalers may change width and height independently,
allow to change pixel aspect ratio.
https://bugzilla.gnome.org/show_bug.cgi?id=766712
Philipp Zabel [Fri, 20 May 2016 10:32:25 +0000 (12:32 +0200)]
v4l2transform: fix scaling in case of fixed pixel aspect ratio
To change pixel aspect ratio from DAR to PAR, the necessary scaling factor
is DAR/PAR, not DAR*PAR.
For good measure, add debug output similar to the fixed-width and
fixed-height cases.
https://bugzilla.gnome.org/show_bug.cgi?id=766711
Philipp Zabel [Fri, 13 May 2016 14:39:25 +0000 (16:39 +0200)]
v4l2object: fill colorimetry in gst_v4l2_object_acquire_format
Instead of relying on the default colorimetry chosen by
gst_video_info_set_format(), set info.colorimetry from the
values returned by G_FMT. This allows decoders to propagate
their input colorimetry downstream.
https://bugzilla.gnome.org/show_bug.cgi?id=766383
Philipp Zabel [Wed, 18 May 2016 08:17:12 +0000 (10:17 +0200)]
v4l2object: refactor gst_v4l2_object_get_colorspace to take a v4l2_format parameter
Move the extraction of colorimetry parameters from struct v4l2_format and the
setting of the identity matrix for RGB formats into the function to avoid code
duplication.
https://bugzilla.gnome.org/show_bug.cgi?id=766383
Philipp Zabel [Fri, 13 May 2016 12:58:41 +0000 (14:58 +0200)]
v4l2videodec: use visible size, not coded size, for downstream negotiation filter
gst_v4l2_probe_caps() returns the coded size, not the visible size. Subtract
the known padding from probed caps with the coded size before using them as
filter for caps negotiation with downstream elements.
https://bugzilla.gnome.org/show_bug.cgi?id=766382
Philipp Zabel [Fri, 13 May 2016 12:45:02 +0000 (14:45 +0200)]
v4l2object: use G_SELECTION instead of G_CROP in gst_v4l2_object_acquire_format
The gst_v4l2_object_acquire_format() function is used by v4l2videodec to obtain
the currently set capture format. Since G_FMT returns the coded size, the
visible size needs to be obtained from the compose rectangle in order to
negotiate it with downstream elements. The G_CROP call hasn't worked on mem2mem
capture queues for a long time. Instead use the G_SELECTION call to obtain the
compose rectangle and only fall back to G_CROP for ancient kernels.
https://bugzilla.gnome.org/show_bug.cgi?id=766381
Andreas Naumann [Wed, 27 Jan 2016 08:57:38 +0000 (09:57 +0100)]
v4l2sink: Use V4L2_BUF_TYPE_VIDEO_OUTPUT_OVERLAY if driver advertises it.
On modern kernels, the G/S_FMT ioctls will always fail using
V4L2_BUF_TYPE_VIDEO_OVERLAY with VFL_DIR_TX (e.g. real overlay out drivers)
since this is not the intented use (rather rx, according to v4l2 API doc).
Probably this is why the Video Output Overlay interface was created, so if
the driver advertises it we might as well use.
For old kernels (pre 2012) the old way might still work so keeping this for
compatibility.
https://bugzilla.gnome.org/show_bug.cgi?id=761165
Kieran Bingham [Mon, 6 Jun 2016 17:52:01 +0000 (18:52 +0100)]
v4l2object: Use non-deprecated V4L2 type for RGB15
Support for the updated V4L2_PIX_FMT_XRGB555 was added in commit
2538fee2fd8fdb74b05f0a511281bc4707e7cc44 however, when setting the format
for use in v4l2 ioctls, the old deprecated format is still used. Convert
this to the new accepted format type, as the preferred format.
https://bugzilla.gnome.org/show_bug.cgi?id=767300
Michael Olbrich [Wed, 4 May 2016 12:50:32 +0000 (14:50 +0200)]
matroskademux: preserve seek flags
Without this some flags get lost in streaming mode.
https://bugzilla.gnome.org/show_bug.cgi?id=767194
Sebastian Dröge [Mon, 6 Jun 2016 07:47:52 +0000 (10:47 +0300)]
Revert "WIP revert soup"
This reverts commit
fdac3a7a231f3848665636cf8122f96103b46e3b.
Was not supposed to be pushed but a local workaround for
https://bugzilla.gnome.org/show_bug.cgi?id=693911#c13
Miguel París Díaz [Fri, 3 Jun 2016 11:09:35 +0000 (13:09 +0200)]
rtpsource: complete warn log with SSRC
https://bugzilla.gnome.org/show_bug.cgi?id=767195
Sebastian Dröge [Tue, 31 May 2016 12:29:13 +0000 (15:29 +0300)]
WIP revert soup
Sebastian Dröge [Fri, 3 Jun 2016 10:18:31 +0000 (13:18 +0300)]
dvdemux: Unref seek event in any case
It would be leaked if no seek handler was currently set.
Sebastian Dröge [Fri, 3 Jun 2016 07:49:17 +0000 (10:49 +0300)]
dvdemux: Properly set event/message sequence numbers based on the previous seek
See https://bugzilla.gnome.org/show_bug.cgi?id=765935
https://bugzilla.gnome.org/show_bug.cgi?id=767157
Sebastian Dröge [Fri, 3 Jun 2016 07:36:32 +0000 (10:36 +0300)]
dvdemux: Remember if upstream had a time segment and if not properly create time segments
Previously the segment.time was wrong, and the position was not updated
correctly, resulting in seeks in PUSH mode with upstream providing a BYTES
segment to not work at all.
https://bugzilla.gnome.org/show_bug.cgi?id=767157
Sebastian Dröge [Fri, 3 Jun 2016 06:54:53 +0000 (09:54 +0300)]
dvdemux: Implement SEEKING query so we can actually seek if upstream can't seek in TIME
https://bugzilla.gnome.org/show_bug.cgi?id=767157
Sebastian Dröge [Thu, 2 Jun 2016 11:19:15 +0000 (14:19 +0300)]
dvdemux: Recalculate the frame offsets at the beginning of each BYTE segment and whenever upstream gives us a timestamp
This fixes seeking in DV streams where upstream operates in PUSH mode with a
TIME segment (e.g. avidemux). Without this, we would generate wrong durations
and timestamps after a seek.
https://bugzilla.gnome.org/show_bug.cgi?id=767157
Sebastian Dröge [Thu, 2 Jun 2016 10:53:44 +0000 (13:53 +0300)]
dvdemux: Pass-through buffer DISCONT flags
https://bugzilla.gnome.org/show_bug.cgi?id=767157
Olivier Crête [Thu, 2 Jun 2016 20:16:45 +0000 (16:16 -0400)]
rtpvp9depay: Don't assert on flexible mode packets
Instead just post a warning on the bus for now.
Guillaume Desmottes [Thu, 2 Jun 2016 13:03:17 +0000 (15:03 +0200)]
tests: rtpbin: fix caps leak
https://bugzilla.gnome.org/show_bug.cgi?id=767156
Guillaume Desmottes [Thu, 2 Jun 2016 13:00:01 +0000 (15:00 +0200)]
tests: amrparse: clean up test
- use GST_CHECK_MAIN() to reduce boilerplate
- unref the input caps using a teardown function to prevent leaks
https://bugzilla.gnome.org/show_bug.cgi?id=767156
Edward Hervey [Fri, 20 May 2016 13:22:35 +0000 (15:22 +0200)]
deinterlace: Ensure DISCONT flag is properly propagated
The output of deinterlace at startup, or when receiving a new DISCONT
buffer, should have the DISCONT flag set on the first buffer.
Josep Torra [Tue, 31 May 2016 19:34:04 +0000 (21:34 +0200)]
v4l2src: check for valid size on raw video buffers
Discard buffers that doesn't contain enough data when dealing
with raw video inputs.
https://bugzilla.gnome.org/show_bug.cgi?id=767086
Sebastian Dröge [Tue, 31 May 2016 14:10:36 +0000 (17:10 +0300)]
qtdemux: Use the demuxer segment instead of a new one for MSS streams
Upstream might have told us something about the to be expected segment, so
let's use that information instead of coming up with a [0,-1] segment.
https://bugzilla.gnome.org/show_bug.cgi?id=767071
Sebastian Dröge [Tue, 31 May 2016 14:04:32 +0000 (17:04 +0300)]
qtdemux: Only activate segments and send SEGMENT events if we have streams
But in that case also remove the pending newsegment event, otherwise we would
later send a possibly outdated event.
https://bugzilla.gnome.org/show_bug.cgi?id=767071
Sebastian Dröge [Tue, 31 May 2016 13:53:50 +0000 (16:53 +0300)]
qtdemux: In PULL mode, nothing is ever going to send us a SEGMENT event
https://bugzilla.gnome.org/show_bug.cgi?id=767071
Sebastian Dröge [Tue, 31 May 2016 13:38:34 +0000 (16:38 +0300)]
qtdemux: Don't override TIME segments from upstream that we just saw
The point of
d8fb7a9c96b108814beeaa0e63f818d4648c7fe9 was to not have any
spurious segments stored for later if we do BYTES->TIME conversion, but
overriding any TIME segments from upstream does not make any sense.
See https://bugzilla.gnome.org/show_bug.cgi?id=763165
https://bugzilla.gnome.org/show_bug.cgi?id=767071
Prashant Gotarne [Thu, 16 Jul 2015 04:18:46 +0000 (09:48 +0530)]
multifilesrc: set position as offset from start-index
query position in GST_FORMAT_BUFFER returns
offset from start-index rather than index.
https://bugzilla.gnome.org/show_bug.cgi?id=752462
Tim-Philipp Müller [Fri, 27 May 2016 11:49:32 +0000 (12:49 +0100)]
tests: add unit test for JPEG-2000 rtp payloader leak
https://bugzilla.gnome.org/show_bug.cgi?id=766870
Pierre Lamot [Wed, 25 May 2016 15:11:13 +0000 (17:11 +0200)]
rtpj2kpay: Fix buffer memory leak
Input buffer memory was not unmapped
https://bugzilla.gnome.org/show_bug.cgi?id=766870
Guillaume Desmottes [Wed, 18 May 2016 09:12:15 +0000 (12:12 +0300)]
v4l2object: fix caps leak
gst_v4l2_object_probe_caps() was taking an extra ref on the returned
caps for no reason.
https://bugzilla.gnome.org/show_bug.cgi?id=766610
Tim-Philipp Müller [Sun, 22 May 2016 19:14:18 +0000 (20:14 +0100)]
videocrop mark crop properties as mutable in playing state
Guillaume Desmottes [Fri, 20 May 2016 13:47:35 +0000 (16:47 +0300)]
souphttpsrc: fix buffer leak when flushing
When early returning in gst_soup_http_src_read_buffer() because the
element is FLUSHING, we need to unmap and unref the buffer which was just created.
https://bugzilla.gnome.org/show_bug.cgi?id=766718
Sebastian Dröge [Fri, 20 May 2016 08:15:44 +0000 (11:15 +0300)]
qtdemux: Set seek event seqnum on all SEGMENT events
Some were forgotten.
See https://bugzilla.gnome.org/show_bug.cgi?id=765935
Sebastian Dröge [Fri, 20 May 2016 08:12:44 +0000 (11:12 +0300)]
avidemux: Pass through seek event seqnums in all SEGMENT/EOS events and SEGMENT_DONE messages/events
See https://bugzilla.gnome.org/show_bug.cgi?id=765935
Sebastian Dröge [Fri, 20 May 2016 07:56:52 +0000 (10:56 +0300)]
matroskademux: Set seek event seqnum in EOS and SEGMENT_DONE messages/events
Also actually store the seqnum in pull mode seeks.
See https://bugzilla.gnome.org/show_bug.cgi?id=765935
Guillaume Desmottes [Tue, 17 May 2016 10:40:38 +0000 (13:40 +0300)]
deinterlace: fix caps leak
The caps returned by gst_pad_get_current_caps() was never unreffed when
not early returning.
Fix a leak with the elements/deinterlace test.
https://bugzilla.gnome.org/show_bug.cgi?id=766558
Mikhail Fludkov [Mon, 25 Jan 2016 15:25:51 +0000 (16:25 +0100)]
rtpsession: don't act on suspicious BYE RTCP
Some endpoints (like Tandberg E20) can send BYE packet containing our
internal SSRC. I this case we would detect SSRC collision and get rid
of the source at some point. But because we are still sending packets
with that SSRC the source will be recreated immediately.
This brand new internal source will not have some variables incorrectly
set in its state. For example 'seqnum-base` and `clock-rate` values will be
-1.
The fix is not to act on BYE RTCP if it contains internal or unknown
SSRC.
https://bugzilla.gnome.org/show_bug.cgi?id=762219
Mikhail Fludkov [Sun, 15 Nov 2015 13:54:28 +0000 (14:54 +0100)]
rtpsession: Add test for locking of the stats signal
Keeping the lock while emitting the stats signal introduces potential
deadlock in those situations when the signal callback wants the access
to rtpsession's properties which also requre the lock.
https://bugzilla.gnome.org/show_bug.cgi?id=762216
Seungha Yang [Thu, 19 May 2016 06:36:57 +0000 (15:36 +0900)]
matroskademux: don't hold object lock whilst pushing out headers
matroskademux would take the GST_OBJECT_LOCK in
- gst_matroska_demux_push_codec_data_all()
- gst_matroska_demux_query()
Some parse element such as FLAC checks upstream seekability, and
there is some use cases that matroska-demux is linked to a parse element
(e.g.,FLAC format) without intermediate elements (e.g., queue).
In this case, matroska-demux never returns from _push_codec_data_all()
because the parser can return only after it receives the response to
the upstream query, but that's not going to happen because it's
deadlocked.
Elements must not hold the object lock whilst pushing out events
or data.
https://bugzilla.gnome.org/show_bug.cgi?id=766645
Sebastian Dröge [Thu, 19 May 2016 09:43:01 +0000 (12:43 +0300)]
souphttpclientsink: Set sent_buffers and streamheader_buffers to NULL after freeing
Otherwise we might use an already freed list later and crash or worse.
Tim-Philipp Müller [Wed, 18 May 2016 17:32:57 +0000 (18:32 +0100)]
udpsrc: fix Since version for new "loop" property
Guillaume Desmottes [Mon, 16 May 2016 14:18:37 +0000 (16:18 +0200)]
rtpdec: fix clock leak
gst_system_clock_obtain() returns a new ref.
https://bugzilla.gnome.org/show_bug.cgi?id=766521
Tim-Philipp Müller [Tue, 17 May 2016 04:33:35 +0000 (05:33 +0100)]
udpsrc: add doc blurb with since marker for new "loop" property
Dimitrios Katsaros [Fri, 13 Nov 2015 14:52:35 +0000 (15:52 +0100)]
avimux: add support for png
https://bugzilla.gnome.org/show_bug.cgi?id=758059
Jan Schmidt [Sun, 15 May 2016 12:07:14 +0000 (22:07 +1000)]
splitmuxsrc: Connect to demux signals before activating
Fix a race in splitmuxsrc by properly connecting to the
demuxer signals we're interested in *before* setting it running.
Sebastian Dröge [Sun, 15 May 2016 10:31:37 +0000 (13:31 +0300)]
docs: Update for git master
Olivier Crête [Sun, 15 May 2016 10:16:23 +0000 (12:16 +0200)]
rtpmp4gpay: Don't produce timestamps based on byte count
The GST_BUFFER_OFFSET of output buffers returned to GstRtpBasePayload
should reflect the number of "samples" in the unit of the RTP clock in this
buffer. If this is not true, then it shouldn't be set.
https://bugzilla.gnome.org/show_bug.cgi?id=761943
Edward Hervey [Sun, 15 May 2016 10:24:03 +0000 (12:24 +0200)]
matroska-mux: Fix strcmp usage
Just use g_strcmp0 which can handle NULL entries
Carlos Rafael Giani [Fri, 4 Mar 2016 09:14:00 +0000 (10:14 +0100)]
souphttpsrc: Use audio/x-unaligned-raw instead of audio/x-raw for L16 data
Directly setting audio/x-raw caps leads to problems when the delivered
data blocks do not align properly at sample boundaries (for example, a
data block with 391 bytes). So, instead, set audio/x-unaligned-raw to
let a parser be autoplugged.
https://bugzilla.gnome.org/show_bug.cgi?id=689460
Seungha Yang [Thu, 12 May 2016 02:52:09 +0000 (11:52 +0900)]
qtdemux: Parsing elst box based on version
segment_duration and media_time should be parsed based on version
of elst box. Specification defines that an elst box with version 1
has uint64 and int64 values for segment_duration and media_time,
respectively.
https://bugzilla.gnome.org/show_bug.cgi?id=766301
Thiago Santos [Sat, 14 May 2016 15:57:41 +0000 (12:57 -0300)]
souphttpsrc: check if request was cancelled when sending message
It might be that the request was aborted by the application and
we can return immediatelly
Thiago Santos [Sat, 14 May 2016 15:43:54 +0000 (12:43 -0300)]
souphttpsrc: proxy resolver is on by default
Remove from the session creation parameters
Thiago Santos [Sat, 14 May 2016 15:15:48 +0000 (12:15 -0300)]
soup: update build to warn about newer deprecated functions
We already depend on 2.48
Thiago Santos [Sat, 14 May 2016 14:09:33 +0000 (11:09 -0300)]
souphttpsrc: reduce reading latency by using non-blocking read
Non-blocking read will return the amount of data available without
blocking to wait for the full requested size.
The downside is that now it souphttpsrc needs to have a waiting
mechanism in case there is no data available yet to avoid busy
looping arond the inputstream.
Sebastian Dröge [Sun, 15 May 2016 09:30:50 +0000 (12:30 +0300)]
rtpsession: Take the lock already when reading the other stats, not just for the hash table
https://bugzilla.gnome.org/show_bug.cgi?id=766025
Tim-Philipp Müller [Sat, 14 May 2016 16:04:57 +0000 (17:04 +0100)]
matroska: use math-compat.h for NAN define
Jan Schmidt [Sat, 14 May 2016 13:39:22 +0000 (23:39 +1000)]
splitmuxsink: Use GstBin async-handling instead of our own.
Set the async-handling property on GstBin to let it manage
async-handling instead of the local handling from the previous
commit. Works because of #174a5e in core
Thiago Santos [Fri, 13 May 2016 13:17:33 +0000 (10:17 -0300)]
souphttpsrc: refactor to use Soup's sync API
Replace the async API with the sync API to remove all the extra mainloop
and context handling. Currently it blocks reading until 'blocksize'
bytes are available but that can be improved by using:
https://developer.gnome.org/gio/unstable/GPollableInputStream.html#g-pollable-input-stream-read-nonblocking
https://bugzilla.gnome.org/show_bug.cgi?id=693911
Thiago Santos [Sat, 14 May 2016 07:50:36 +0000 (04:50 -0300)]
tests: souphttpsrc: replace deprecated API
Avoid using soup_server_run_async and old get_port() APIs,
replace with me soup_server_listen and get the port through the
URIs list returned from the server.
Olivier Crête [Sat, 14 May 2016 10:34:10 +0000 (12:34 +0200)]
jitterbuffer: Upgrade debug message to error
It causes the entire pipeline to fail, it should be easier to find.
Jan Schmidt [Sat, 14 May 2016 08:32:52 +0000 (18:32 +1000)]
splitmuxsink: Hide internal async state changes.
When switching fragments, hide the async-start/async-done
messages from the parent bin, as otherwise we sometimes (very rarely)
hang in PAUSED instead of returning / continuing to PLAYING
state.
Jan Schmidt [Fri, 13 May 2016 11:20:28 +0000 (21:20 +1000)]
splitmuxsink: Remove stray carriage-return from debug
Sebastian Dröge [Fri, 13 May 2016 13:43:21 +0000 (16:43 +0300)]
rtp: Ship gstrtpj2kcommon.h file to fix distcheck
Jesper Larsen [Thu, 30 Apr 2015 12:43:04 +0000 (14:43 +0200)]
avimux: Do not write index and header if idx is NULL
Fixes criticals with e.g.
videotestsrc num-buffers=1 ! identity drop-probability=1.0 ! avimux ! fakesink
https://bugzilla.gnome.org/show_bug.cgi?id=748700
Aaron Boxer [Thu, 12 May 2016 12:43:39 +0000 (08:43 -0400)]
rtpj2kpay: manage T tile invalidation bit correctly, update tile id in header correctly.
1. according to RFC, T bit is only set when either the RTP packet only contains the J2K main header, or the packet contains tile parts from multiple tiles. This is now being managed correctly in the code. The second scenario cannot happen with our payloader, since tile headers are always placed in their own RTP packet, and so a packet cannot contain tile parts from multiple tiles.
However, I have added code to track if multiple tile parts are included in a single RTP packet, in case in the future we want to put header and data in same packet.
2. Old code would set the tile id to zero for all J2K packets. This is now set correctly to the appropriate tile id.
https://bugzilla.gnome.org/show_bug.cgi?id=745187
Aaron Boxer [Thu, 12 May 2016 12:41:51 +0000 (08:41 -0400)]
rtpj2kpay: manage fragmented headers correctly
J2K main header framentation across multiple RTP packets is now handled correctly
https://bugzilla.gnome.org/show_bug.cgi?id=745187
Aaron Boxer [Wed, 11 May 2016 19:04:26 +0000 (15:04 -0400)]
rtpj2k: move common code to shared header, code clean up
https://bugzilla.gnome.org/show_bug.cgi?id=745187
Aaron Boxer [Wed, 11 May 2016 19:01:32 +0000 (15:01 -0400)]
rtpj2k: update documentation
https://bugzilla.gnome.org/show_bug.cgi?id=745187
Patricia Muscalu [Thu, 12 May 2016 12:43:43 +0000 (14:43 +0200)]
auparse: Fix sticky event misordering warning
Make sure that src pad has caps before sending segment event.
https://bugzilla.gnome.org/show_bug.cgi?id=766359
Sebastian Dröge [Wed, 11 May 2016 06:28:13 +0000 (09:28 +0300)]
rtpsession: Don't notify about stats property changes while taking the session lock
The signal handlers might want to actually get the value of the stats
property, which would take the session lock again and deadlock.
This was introduced by
2e960e70750a0cb7e1117d0c09d08597866a29ee.
https://bugzilla.gnome.org/show_bug.cgi?id=766025
Thiago Santos [Tue, 3 May 2016 16:59:54 +0000 (13:59 -0300)]
qtdemux: improve edts segment handling after seeks in push mode
Properly handle edts segments for push-based operation seeking.
We only support edts that a single segment that has media at the end,
being preceeded by any number of gap segments.
This also allows the qt segment rate to be respected after seeks
https://bugzilla.gnome.org/show_bug.cgi?id=765669
Thiago Santos [Tue, 3 May 2016 13:41:06 +0000 (10:41 -0300)]
qtdemux: properly activate segment with rate != 1.0
Also use the qt rate to identify the position within a qt segment
to properly translate playback time to qt media time
https://bugzilla.gnome.org/show_bug.cgi?id=765669
Havard Graff [Tue, 3 May 2016 09:45:01 +0000 (11:45 +0200)]
rtpjitterbuffer: Fix stall when receiving already lost packet
When a packet arrives that has already been considered lost as part of a
large gap the "lost timer" for this will be cancelled. If the remaining
packets of this large gap never arrives, there will be missing entries
in the queue and the loop function will keep waiting for these packets
to arrive and never push another packet, effectively stalling the
pipeline.
The proposed fix conciders parts of a large gap definitely lost (since
they are calculated from latency) and ignores the late arrivals.
In practice the issue is rare since large gaps are scheduled immediately,
and for the stall to happen the late arrival needs to be processed
before this times out.
https://bugzilla.gnome.org/show_bug.cgi?id=765933
Miguel París Díaz [Thu, 5 May 2016 12:18:21 +0000 (14:18 +0200)]
rtpsession: Take session lock when creating stats
The access to the session hash table must happen while the session lock is
taken, otherwise another thread might modify the hash table while we're
creating the stats.
https://bugzilla.gnome.org/show_bug.cgi?id=766025
Thiago Santos [Wed, 4 May 2016 00:17:01 +0000 (21:17 -0300)]
qtdemux: update segment when new duration is found
Otherwise the old segment will have a shorter stop time and would
cause the stream to end too early.
Thiago Santos [Wed, 4 May 2016 14:37:29 +0000 (11:37 -0300)]
qtdemux: dismember activate_segment into 2 parts
One that updates and push a new segment, the other will move the
stream to the new segment starting position
Sebastian Dröge [Wed, 4 May 2016 06:30:27 +0000 (09:30 +0300)]
dv: Use correct pixel-aspect-ratio values
The previous ones resulted in odd display aspect ratios and were different
from the ones used by e.g. ffmpeg. The new ones now result in display aspect
ratios of 4:3 and 16:9.
https://bugzilla.gnome.org/show_bug.cgi?id=765946
George Kiagiadakis [Mon, 9 Nov 2015 16:55:09 +0000 (17:55 +0100)]
tests: add splitmuxsrc test for new "format-location" signal
https://bugzilla.gnome.org/show_bug.cgi?id=753625
George Kiagiadakis [Mon, 9 Nov 2015 16:51:12 +0000 (17:51 +0100)]
splitmuxsrc: add a format-location signal that allows bypassing the location property
This signal allows a user to directly return a sorted list of
files to be joined, so that they don't have to follow the
filename pattern that the "location" property expects.
https://bugzilla.gnome.org/show_bug.cgi?id=753625
Xavier Claessens [Wed, 4 May 2016 15:15:20 +0000 (11:15 -0400)]
splitmuxsink: Fix deadlock case when source reaches EOS
https://bugzilla.gnome.org/show_bug.cgi?id=765072
Stefan Sauer [Wed, 4 May 2016 05:59:27 +0000 (22:59 -0700)]
wavparse: simplify and correct header scanning
The wav spec tells that 'fmt' (and 'bext' if present) must come before 'data'.
There is no requirement for 'fmt' to be first. We already had a list of chunks
to skip, but it is easier to just skip any chunk while seeking for 'fmt'.
This fixes reading files generated by ProTools.
Hyunjun Ko [Sat, 30 Apr 2016 13:15:13 +0000 (22:15 +0900)]
osxaudio: Support audio device provider on osx
https://bugzilla.gnome.org/show_bug.cgi?id=753265
Mark Nauwelaerts [Sun, 1 May 2016 13:09:27 +0000 (15:09 +0200)]
avimux: set audio header rate according to calculated bps in stop_file
... now that set_fields is no longer called there by
e538608b3f90539003de21c1db238f3c9b946e30
Sebastian Dröge [Fri, 29 Apr 2016 12:04:11 +0000 (15:04 +0300)]
qtdemux: Store the segment sequence number in the EOS events and SEGMENT_DONE events/message
Also instead of storing it per stream, store it globally in the demuxer. It's
the same for each stream anyway.
https://bugzilla.gnome.org/show_bug.cgi?id=765806
Sebastian Dröge [Mon, 11 Apr 2016 07:54:38 +0000 (10:54 +0300)]
udpsrc: Always bind to ANY when address is a multicast address and not only on Windows
For IPv6 addresses, binding to a multicast group does not work on Linux
either. Always bind to ANY and then later join the multicast group.
https://bugzilla.gnome.org/show_bug.cgi?id=764679
Song Bing [Tue, 26 Apr 2016 09:01:49 +0000 (17:01 +0800)]
ximageutil: shouldn't implement transform if don't support it
shouldn't implement transform if don't support it. Or gst_buffer_copy_into()
will print ERROR log.
https://bugzilla.gnome.org/show_bug.cgi?id=765583
Sebastian Dröge [Thu, 28 Apr 2016 13:24:52 +0000 (16:24 +0300)]
qtmux: Allow MPEG-1 Layer 1 and 2 in addition to 3 in MP4
Via the MPEG-4 Part 3 spec we can support the other layers too.
Also correct the samples per frame calculation for MP3 if it's MPEG-2 or
MPEG-2.5.
https://bugzilla.gnome.org/show_bug.cgi?id=765725
Sebastian Dröge [Wed, 27 Apr 2016 17:46:34 +0000 (20:46 +0300)]
rtspsrc: Update caps for TCP whenever they change
We only changed them for UDP so far, which caused the wrong seqnum-base and
other information to be passed to rtpjitterbuffer/etc when seeking. This
usually wasn't that much of a problem as the code there is robust enough, but
every now and then it causes us to drop up to 32756 packets before we
continue doing anything meaningful.
https://bugzilla.gnome.org/show_bug.cgi?id=765689
Sebastian Dröge [Wed, 27 Apr 2016 17:33:38 +0000 (20:33 +0300)]
rtpjitterbuffer: Ensure to not take caps with the wrong pt for getting the clock-rate
Especially the caps on the pad might be out of date, and the new caps would be
provided for the current pt via the request-pt-map signal.
https://bugzilla.gnome.org/show_bug.cgi?id=765689
Sebastian Dröge [Wed, 27 Apr 2016 15:27:17 +0000 (18:27 +0300)]
rtspsrc: Don't propagate spurious state change returns from internal elements further
We handle them inside rtspsrc and override them in all other cases anyway, so
do the same for "internal" state changes like PAUSED->PAUSED and
PLAYING->PLAYING.
This keeps unexpected NO_PREROLL to confuse state changes in GstBin.
See also https://bugzilla.gnome.org/show_bug.cgi?id=760532
https://bugzilla.gnome.org/show_bug.cgi?id=765689
Sebastian Dröge [Wed, 27 Apr 2016 11:09:03 +0000 (14:09 +0300)]
avimux: Don't override maximum audio chunk size with the scale again just before writing it
set_fields() should only be called in the beginning, otherwise we will never
remember the maximum audio chunk size and write a wrong block align... which
then causes wrong timestamps and other problems.
Sebastian Dröge [Wed, 27 Apr 2016 10:53:00 +0000 (13:53 +0300)]
avimux: Actually store the largest audio chunk size for the VBR case of MP2/MP3
3ea338ce271e1f6a96d2ed49d4472b091f6f8b7e changed avimux to do that, but it
never actually kept track of the max audio chunk for MP3 and MP2. These are
knowing the hdr.scale only after parsing the frames instead of at setcaps
time.
Mats Lindestam [Mon, 25 Apr 2016 13:03:14 +0000 (15:03 +0200)]
multiudpsink: Allow setting "socket-v6" without setting "socket" too
https://bugzilla.gnome.org/show_bug.cgi?id=764897
Mario Sanchez Prada [Fri, 22 Apr 2016 14:02:16 +0000 (15:02 +0100)]
vpxenc: Properly handle frames with too low duration
When a frame's duration is too low, calling gst_util_uint64_scale()
to scale its value can result into it being truncated to zero, which
will cause the vpx encoder to return an VPX_CODEC_INVALID_PARAM error
when trying to encode.
To prevent this from happening, we simply ignore the duration when
encoding if it becomes zero after scaling, logging a warning message.
https://bugzilla.gnome.org/show_bug.cgi?id=765391
Tim-Philipp Müller [Fri, 22 Apr 2016 14:48:08 +0000 (15:48 +0100)]
deinterlace: fix description of linear interlacing method
Thibault Saunier [Thu, 21 Apr 2016 17:08:19 +0000 (14:08 -0300)]
flv: Handle the case where we do not get any CollectData in handle_buffer
https://bugzilla.gnome.org/show_bug.cgi?id=765320
Seungha Yang [Mon, 11 Apr 2016 13:41:20 +0000 (22:41 +0900)]
qtdemux: Do not use unreliable framerate
timescale/1 is unreliable value for framerate. Due to downstream
element usually use framerate generated by qtdemux, let it be omitted
until the framerate can be reliably calculated.
https://bugzilla.gnome.org/show_bug.cgi?id=764733
Sebastian Dröge [Thu, 21 Apr 2016 09:53:33 +0000 (12:53 +0300)]
Revert "qtdemux: expose streams with first moof for fragmented format"
This reverts commit
d8bb6687ea251570c331038279a43d448167d6ad.
https://bugzilla.gnome.org/show_bug.cgi?id=764733