GDB Administrator [Thu, 1 Jun 2017 00:00:46 +0000 (00:00 +0000)]
Automatic date update in version.in
Simon Marchi [Wed, 31 May 2017 15:09:07 +0000 (17:09 +0200)]
Rename "mem" related commmands
Rename "mem" related commands, so that their naming is consistent with
the <command-name>_command pattern of naming functions that implement
commands.
gdb/ChangeLog:
* memattr.c (mem_info_command): Rename to ...
(info_mem_command): ... this.
(mem_enable_command): Rename to ...
(enable_mem_command): ... this.
(mem_disable_command): Rename to ...
(disable_mem_command): ... this.
(mem_delete_command): Rename to ...
(delete_mem_command): ... this.
(_initialize_mem): Adjust function names.
Alan Modra [Wed, 31 May 2017 08:40:01 +0000 (18:10 +0930)]
PowerPC64 ld help quoting
* emultempl/ppc64elf.em (plt-static-chain help): Fix quoting.
Markus Metzger [Mon, 21 Nov 2016 13:27:57 +0000 (14:27 +0100)]
btrace: support decoder events
Newer versions of libipt support instruction flow decoder events instead of
indicating those events with flags in struct pt_insn. Add support for them in
GDB.
gdb/
* btrace.c (handle_pt_insn_events): New.
(ftrace_add_pt): Call handle_pt_insn_events. Rename ERRCODE into
STATUS. Split into this and ...
(handle_pt_insn_event_flags): ... this.
Markus Metzger [Mon, 21 Nov 2016 10:46:15 +0000 (11:46 +0100)]
config, btrace: check for pt_insn_event in libipt
Version 2 of libipt adds an event system to instruction flow decoders and
deprecates indicating events via flags in struct pt_insn. Add configuration
checks to determine which version we have.
gdb/
* configure.ac: Check for pt_insn_event, struct pt_insn.enabled,
and struct pt_insn.resynced.
* configure: Regenerated.
* config.in: Regenerated.
Eli Zaretskii [Wed, 31 May 2017 06:44:08 +0000 (09:44 +0300)]
Avoid compilation warning on MinGW in xstrndup
libiberty/ChangeLog:
2017-05-31 DJ Delorie <dj@redhat.com>
* configure.ac (strnlen): Add to AC_CHECK_DECLS.
* configure: Likewise.
* config.in: Add HACE_DECL_STRNLEN.
Eli Zaretskii [Wed, 31 May 2017 06:37:48 +0000 (09:37 +0300)]
Make libiberty/waitpid.c compile without warnings on MinGW
libiberty/ChangeLog:
2017-05-31 Eli Zaretskii <eliz@gnu.org>
* waitpid.c (wait) [__MINGW32__]: Define as a macro
that calls _cwait, so that this function works on MinGW.
Eli Zaretskii [Wed, 31 May 2017 06:35:07 +0000 (09:35 +0300)]
Fix MinGW compilation warnings due to environ.h
include/ChangeLog:
2017-05-31 Eli Zaretskii <eliz@gnu.org>
* environ.h: Add #ifndef guard.
GDB Administrator [Wed, 31 May 2017 00:00:41 +0000 (00:00 +0000)]
Automatic date update in version.in
Casey Smith [Tue, 30 May 2017 14:07:56 +0000 (15:07 +0100)]
Fix calculation of R_ARM_RHM_ALU_PREL_11_0 relocation when used with a SUB instruction.
PR ld/21523
* elf32-arm.c (elf32_arm_final_link_relocate): Install an absolute
value when processing the R_ARM_THM_ALU_PREL_11_0 reloc.
Anton Kolesov [Thu, 16 Mar 2017 12:21:31 +0000 (15:21 +0300)]
[ARC] Allow CPU to be enforced via disassemble_info options
Currently print_insn_arc relies on BFD mach and ELF private headers to
distinguish between various ARC architectures. Sometimes those values are not
correct or available, mainly in the case of debugging targets without and ELF
file available. Changing a BFD mach is not a problem for the debugger, because
this is a generic BFD field, and GDB, for example, already sets it according to
information provided in XML target description or specified via GDB 'set arch'
command. However, things are more complicated for ELF private headers, since
it requires existing of an actual ELF file. To workaround this problem this
patch allows CPU model to be specified via disassemble info options. If CPU is
specified in options, then it will take a higher precedence than whatever might
be specified in ELF file.
This is mostly needed for ARC EM and ARC HS, because they have the same
"architecture" (mach) ARCv2 and differ in their private ELF headers. Other ARC
architectures can be distinguished between each other purely via "mach" field.
Proposed disassemble option format is "cpu=<CPU>", where CPU can be any valid
ARC CPU name as supported by GAS. Note that this creates a seeming redundancy
with objdump -m/--architecture option, however -mEM and -mHS still result in
"ARCv2" architecture internally, while -Mcpu={HS,EM} would have an actual
effect on disassembler.
opcodes/ChangeLog:
yyyy-mm-dd Anton Kolesov <anton.kolesov@synopsys.com>
* arc-dis.c (enforced_isa_mask): Declare.
(cpu_types): Likewise.
(parse_cpu_option): New function.
(parse_disassembler_options): Use it.
(print_insn_arc): Use enforced_isa_mask.
(print_arc_disassembler_options): Document new options.
binutils/ChangeLog:
yyyy-mm-dd Anton Kolesov <anton.kolesov@synopsys.com>
* doc/binutils.texi: Document new cpu=... disassembler options for ARC.
Anton Kolesov [Fri, 7 Apr 2017 14:22:39 +0000 (17:22 +0300)]
[ARC] Add arc-cpu.def with processor definitions
This patch extracts ARC CPU definitions from gas/config/tc-arc.c (cpu_types)
into a separate file arc-cpu.def. This will allow reuse of CPU type definition
in multiple places where it might be needed, for example in disassembler. This
will help ensure that gas and disassembker use same option values for CPUs.
arc-cpu.def file relies on preprocessor macroses which are defined somewhere
else. This for example multiple C files to include arc-cpu.def, but define
different macroses, therefore creating different structures.
include/ChangeLog:
yyyy-mm-dd Anton Kolesov <anton.kolesov@synopsys.com>
* elf/arc-cpu.def: New file.
gas/ChangeLog:
yyyy-mm-dd Anton Kolesov <anton.kolesov@synopsys.com>
* config/tc-arc.c (cpu_types): Include arc-cpu.def
Signed-off-by: Anton Kolesov <Anton.Kolesov@synopsys.com>
Anton Kolesov [Fri, 17 Mar 2017 15:37:42 +0000 (18:37 +0300)]
[ARC] Implement compatible function for ARC BFD architectures
The general rule for bfd_arch_info_type->compatible (A, B) is that if A and B
are compatible, then this function should return architecture that is more
"feature-rich", that is, can run both A and B. ARCv2, EM and HS all has same
mach number, so bfd_default_compatible assumes they are the same, and returns
an A. That causes issues with GDB, because GDB assumes that if machines are
compatible, then "compatible ()" always returns same machine regardless of
argument order. As a result GDB gets confused because, for example,
compatible(ARCv2, EM) returns ARCv2, but compatible(EM, ARCv2) returns EM,
hence GDB is not sure if they are compatible and prints a warning.
bfd/ChangeLog:
yyyy-mm-dd Anton Kolesov Anton.Kolesov@synopsys.com
cpu-arc.c (arc_compatible): New function.
Anton Kolesov [Fri, 17 Mar 2017 13:43:31 +0000 (16:43 +0300)]
[ARC] Remove duplicate ARC600 entry
ARC600 is already defined as the head of the bfd_arch_arc.
bfd/ChangeLog:
yyyy-mm-dd Anton Kolesov <anton.kolesov@synopsys.com>
* cpu-arc.c (arch_info_struct): Remove duplicate ARC600 entry.
H.J. Lu [Tue, 30 May 2017 13:34:05 +0000 (06:34 -0700)]
Add bfd_get_file_size to get archive element size
We can't use stat() to get archive element size. Add bfd_get_file_size
to get size for both normal files and archive elements.
bfd/
PR binutils/21519
* bfdio.c (bfd_get_file_size): New function.
* bfd-in2.h: Regenerated.
binutils/
PR binutils/21519
* objdump.c (dump_relocs_in_section): Replace get_file_size
with bfd_get_file_size to get archive element size.
* testsuite/binutils-all/objdump.exp (test_objdump_f): New
proc.
(test_objdump_h): Likewise.
(test_objdump_t): Likewise.
(test_objdump_r): Likewise.
(test_objdump_s): Likewise.
Add objdump tests on archive.
Tim Wiederhake [Tue, 30 May 2017 10:47:37 +0000 (12:47 +0200)]
btrace: Store function segments as objects.
Tim Wiederhake [Tue, 30 May 2017 10:47:37 +0000 (12:47 +0200)]
btrace: Remove bfun_s vector.
Tim Wiederhake [Tue, 30 May 2017 10:47:37 +0000 (12:47 +0200)]
btrace: Replace struct btrace_function::segment.
This used to hold a pair of pointers to the previous and next function segment
that belong to this function call. Replace with a pair of indices into the
vector of function segments.
Tim Wiederhake [Tue, 30 May 2017 10:47:37 +0000 (12:47 +0200)]
btrace: Remove struct btrace_function::flow.
This used to hold a pair of pointers to the previous and next function segment
in execution flow order. It is no longer necessary as the previous and next
function segments now are simply the previous and next elements in the vector
of function segments.
Tim Wiederhake [Tue, 30 May 2017 10:47:37 +0000 (12:47 +0200)]
btrace: Replace struct btrace_function::up.
This used to hold a function segment pointer. Change it to hold an index into
the vector of function segments instead.
Tim Wiederhake [Tue, 30 May 2017 10:47:37 +0000 (12:47 +0200)]
btrace: Remove struct btrace_thread_info::{begin,end}.
These are no longer needed and might hold invalid addresses once we change the
vector of function segment pointers into a vector of function segment objects
where a reallocation of the vector changes the address of its elements.
Tim Wiederhake [Tue, 30 May 2017 10:47:37 +0000 (12:47 +0200)]
btrace: Remove constant arguments.
Tim Wiederhake [Tue, 30 May 2017 10:47:37 +0000 (12:47 +0200)]
btrace: Use function segment index in insn iterator.
Remove FUNCTION pointer in struct btrace_insn_iterator and use an index into
the list of function segments instead.
Tim Wiederhake [Tue, 30 May 2017 10:47:37 +0000 (12:47 +0200)]
btrace: Use function segment index in call iterator.
Remove FUNCTION pointer in struct btrace_call_iterator and use an index into
the list of function segments instead.
Tim Wiederhake [Tue, 30 May 2017 10:47:37 +0000 (12:47 +0200)]
btrace: Add btinfo to instruction interator.
This will serve as the access path to the vector of function segments once
the FUNCTION pointer in struct btrace_insn_iterator is removed.
Tim Wiederhake [Tue, 30 May 2017 10:47:37 +0000 (12:47 +0200)]
btrace: Transfer ownership of pointers.
Directly insert new btrace_function pointers into the vector and have the
vector own these pointers. This allows us to later retrieve these objects by
their number directly after creation whereas at the moment we have to wait
until the vector is fully populated.
This requires to pull btrace_thread_info through different functions but
cleans up the code for freeing the trace.
Tim Wiederhake [Tue, 30 May 2017 10:47:37 +0000 (12:47 +0200)]
btrace: Use std::vector in struct btrace_thread_information.
Andreas Krebbel [Tue, 30 May 2017 10:04:10 +0000 (12:04 +0200)]
S/390: Fix indentation
gas/ChangeLog:
2017-05-30 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* config/tc-s390.c (md_gather_operands): Fix indentation.
Simon Marchi [Tue, 30 May 2017 09:29:57 +0000 (11:29 +0200)]
Fix NEWS formatting in GDB 8.0 section
Change the GDB 8.0 section of the NEWS file to try to follow this order:
* Functional changes
* Added and removed configurations and targets
* New commands
* New options
* MI changes
In particular, there were two "New commands" sections.
gdb/ChangeLog:
* NEWS (Changes in GDB 8.0): Remove extra empty line. Move
"Removed targets and native configurations" up. Merge duplicate
"New commands" sub-sections. Add "New options" sub-sections.
Simon Marchi [Tue, 30 May 2017 09:24:52 +0000 (11:24 +0200)]
gdb.base/watch-cond-infcall.exp: Don't run if target doesn't support infcalls
This test requires calling a function in the inferior, and therefore it
doesn't make sense to run it if the target doesn't support calling
functions from GDB.
gdb/testsuite/ChangeLog:
* gdb.base/watch-cond-infcall.exp: Don't run if target doesn't
support function calls from GDB.
Andreas Krebbel [Mon, 29 May 2017 10:38:42 +0000 (12:38 +0200)]
S/390: Fix instruction types of csdtr and csxtr
opcodes/ChangeLog:
2017-05-30 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* s390-opc.c: Add new instruction types RRF_0URF and RRF_0UREFE.
* s390-opc.txt: Fix instruction typs of csdtr and csxtr.
gas/ChangeLog:
2017-05-30 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* testsuite/gas/s390/zarch-z9-ec.d: Adjust csdtr and csxtr.
* testsuite/gas/s390/zarch-z9-ec.s: Likewise.
Andreas Krebbel [Mon, 29 May 2017 10:38:11 +0000 (12:38 +0200)]
S/390: Add missing operand to tb instruction
gas/ChangeLog:
2017-05-30 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* testsuite/gas/s390/esa-g5.d: Add missing operand to tb
instruction.
* testsuite/gas/s390/esa-g5.s: Likewise.
opcodes/ChangeLog:
2017-05-30 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* s390-opc.txt: Add missing operand to tb instruction.
Andreas Krebbel [Mon, 29 May 2017 10:36:57 +0000 (12:36 +0200)]
S/390: Add ipte/idte variants with optional operands
This patch adds missing variants of ipte and idte instructions added with later CPU
generations.
ipte got an optional operand with z196 and another one with zEC12.
idte got an optional operand with zEC12
opcodes/ChangeLog:
2017-05-30 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* s390-opc.c: Add new idte/ipte variants.
* s390-opc.txt: Likewise.
gas/ChangeLog:
2017-05-30 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* testsuite/gas/s390/zarch-z196.d: Add new idte/ipte variants.
* testsuite/gas/s390/zarch-z196.s: Likewise.
* testsuite/gas/s390/zarch-zEC12.d: Likewise.
* testsuite/gas/s390/zarch-zEC12.s: Likewise.
Andreas Krebbel [Mon, 29 May 2017 10:34:56 +0000 (12:34 +0200)]
S/390: Improve error checking for optional operands
So far we only had an instruction flag which made an arbitrary number
of operands optional. This limits error checking capabilities for
instructions marked that way. With this patch the optparm flag only
allows a single optional parameter and another one is added (optparm2)
allowing 2 optional arguments. Hopefully we won't need more than that
in the future. So far there will be only a single use of optparm2.
gas/ChangeLog:
2017-05-30 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* config/tc-s390.c (md_gather_operands): Support new optparm2
instruction flag.
include/ChangeLog:
2017-05-30 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* opcode/s390.h: Add new instruction flags optparm2.
opcodes/ChangeLog:
2017-05-30 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* s390-dis.c (s390_print_insn_with_opcode): Support new optparm2
instruction flag.
* s390-mkopc.c (main): Recognize the new instruction flag when
parsing instruction list.
Andreas Krebbel [Mon, 29 May 2017 10:33:15 +0000 (12:33 +0200)]
S/390: Remove optional operand flag.
The per operand optional flag hasn't been used for quite some time.
Cleanup some remains.
include/ChangeLog:
2017-05-30 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* opcode/s390.h: Remove S390_OPERAND_OPTIONAL.
gas/ChangeLog:
2017-05-30 Andreas Krebbel <krebbel@linux.vnet.ibm.com>
* config/tc-s390.c (md_gather_operands): Remove code dealing with
S390_OPERAND_OPTIONAL.
GDB Administrator [Tue, 30 May 2017 00:00:15 +0000 (00:00 +0000)]
Automatic date update in version.in
GDB Administrator [Mon, 29 May 2017 00:00:36 +0000 (00:00 +0000)]
Automatic date update in version.in
GDB Administrator [Sun, 28 May 2017 00:00:39 +0000 (00:00 +0000)]
Automatic date update in version.in
GDB Administrator [Sat, 27 May 2017 00:00:40 +0000 (00:00 +0000)]
Automatic date update in version.in
Alan Hayward [Fri, 26 May 2017 16:04:13 +0000 (17:04 +0100)]
Add regcache raw_supply_integer and raw_collect_integer.
Use these to replace instances of MAX_REGISTER_SIZE.
* defs.h (copy_integer_to_size): New declaration.
* findvar.c (copy_integer_to_size): New function.
(do_cint_test): New selftest function.
(copy_integer_to_size_test): Likewise.
(_initialize_findvar): Likewise.
* mips-fbsd-tdep.c (mips_fbsd_supply_reg): Use raw_supply_integer.
(mips_fbsd_collect_reg): Use raw_collect_integer.
* mips-linux-tdep.c (supply_32bit_reg): Use raw_supply_integer.
(mips64_fill_gregset): Use raw_collect_integer
(mips64_fill_fpregset): Use raw_supply_integer.
* regcache.c (regcache::raw_supply_integer): New function.
(regcache::raw_collect_integer): Likewise.
* regcache.h: (regcache::raw_supply_integer): New declaration.
(regcache::raw_collect_integer): Likewise.
GDB Administrator [Fri, 26 May 2017 00:00:38 +0000 (00:00 +0000)]
Automatic date update in version.in
GDB Administrator [Thu, 25 May 2017 00:00:45 +0000 (00:00 +0000)]
Automatic date update in version.in
Yao Qi [Wed, 24 May 2017 21:15:23 +0000 (22:15 +0100)]
Add unit test to gdbarch methods register_to_value and value_to_register
This patch adds one unit test for gdbarch methods register_to_value and
value_to_register. The test pass different combinations of {regnu, type}
to gdbarch_register_to_value and gdbarch_value_to_register. In order
to do the test, add a new function create_new_frame to create a fake
frame. It can be improved after we converted frame_info to class.
In order to isolate regcache (from target_ops operations on writing
registers, like target_store_registers), the sub-class of regcache in the
test override raw_write. Also, in order to get the right regcache from
get_thread_arch_aspace_regcache, the sub-class of regcache inserts itself
to current_regcache.
Suppose I incorrectly modified the size of buffer as below,
@@ -1228,7 +1228,7 @@ ia64_register_to_value (struct frame_info *frame, int regnum,
int *optimizedp, int *unavailablep)
{
struct gdbarch *gdbarch = get_frame_arch (frame);
- gdb_byte in[MAX_REGISTER_SIZE];
+ gdb_byte in[1];
/* Convert to TYPE. */
if (!get_frame_register_bytes (frame, regnum, 0,
build GDB with "-fsanitize=address" and run unittest.exp, asan can detect
such error
==2302==ERROR: AddressSanitizer: stack-buffer-overflow on address 0x7fff98193870 at pc 0xbd55ea bp 0x7fff981935a0 sp 0x7fff98193598
WRITE of size 16 at 0x7fff98193870 thread T0
#0 0xbd55e9 in frame_register_unwind(frame_info*, int, int*, int*, lval_type*, unsigned long*, int*, unsigned char*) /home/yao/SourceCode/gnu/gdb/git/gdb/frame.c:1119
#1 0xbd58c8 in frame_register(frame_info*, int, int*, int*, lval_type*, unsigned long*, int*, unsigned char*) /home/yao/SourceCode/gnu/gdb/git/gdb/frame.c:1147
#2 0xbd6e25 in get_frame_register_bytes(frame_info*, int, unsigned long, int, unsigned char*, int*, int*) /home/yao/SourceCode/gnu/gdb/git/gdb/frame.c:1427
#3 0x70080a in ia64_register_to_value /home/yao/SourceCode/gnu/gdb/git/gdb/ia64-tdep.c:1236
#4 0xbf570e in gdbarch_register_to_value(gdbarch*, frame_info*, int, type*, unsigned char*, int*, int*) /home/yao/SourceCode/gnu/gdb/git/gdb/gdbarch.c:2619
#5 0xc05975 in register_to_value_test /home/yao/SourceCode/gnu/gdb/git/gdb/gdbarch-selftests.c:131
Or, even if GDB is not built with asan, GDB just crashes.
*** stack smashing detected ***: ./gdb terminated
Aborted (core dumped)
gdb:
2017-05-24 Yao Qi <yao.qi@linaro.org>
* Makefile.in (SFILES): Add gdbarch-selftests.c.
(COMMON_OBS): Add gdbarch-selftests.o.
* frame.c [GDB_SELF_TESTS] (create_new_frame): New function.
* frame.h [GDB_SELF_TESTS] (create_new_frame): Declare.
* gdbarch-selftests.c: New file.
* regcache.h (regcache) <~regcache>: Mark it virtual if
GDB_SELF_TEST.
<raw_write>: Likewise.
Yao Qi [Wed, 24 May 2017 21:15:23 +0000 (22:15 +0100)]
Move current_regcache to regcache::current_regcache
This patches moves global variable current_regcache to a class regcache
static variable (protected) so that the unit test I add in the following
patch can access it (by means of extending class regcache in unit test).
gdb:
2017-05-24 Yao Qi <yao.qi@linaro.org>
* regcache.c (current_regcache): Change it to
regcache::current_regcache.
(regcache_observer_target_changed): Update.
(regcache_thread_ptid_changed): Make it a regcache static
method.
(regcache_thread_ptid_changed): Update.
(class regcache_access): New.
(current_regcache_test): Update.
(_initialize_regcache): Update.
* regcache.h: Include forward_list.
(regcache): Declare regcache_thread_ptid_changed and declare
registers_changed_ptid as friend.
Yao Qi [Wed, 24 May 2017 21:15:23 +0000 (22:15 +0100)]
Get register contents by register_size instead of TYPE_LENGTH
We should use register_size to get register contents instead of
TYPE_LENGTH.
gdb:
2017-05-24 Yao Qi <yao.qi@linaro.org>
* i387-tdep.c (i387_register_to_value): Use register_size
instead of TYPE_LENGTH.
* m68k-tdep.c (m68k_register_to_value): Likewise.
Yao Qi [Wed, 24 May 2017 21:15:23 +0000 (22:15 +0100)]
Restrict i387_convert_register_p
gdb:
2017-05-24 Yao Qi <yao.qi@linaro.org>
* i387-tdep.c (i387_convert_register_p): Return false if type
code isn't TYPE_CODE_FLT.
Yao Qi [Wed, 24 May 2017 21:15:23 +0000 (22:15 +0100)]
Restrict alpha_convert_register_p
This patch restricts alpha_convert_register_p from
"TYPE_LENGTH (type) != 8" to "TYPE_LENGTH (type) == 4", because,
- we have check "TYPE_LENGTH (valtype) == 4" in alpha_register_to_value
and alpha_value_to_register,
- alpha lds and sts instruction access 4 bytes,
- comments "It might need to convert the [float] register into the
corresponding [integer] type (see Alpha)" and integer is 4-byte on
alpha,
I think it is the right restrict condition to "TYPE_LENGTH (valtype) == 4".
gdb:
2017-05-24 Yao Qi <yao.qi@linaro.org>
* alpha-tdep.c (alpha_convert_register_p): Return true if type
length is 4.
(alpha_register_to_value): Remove type length check.
(alpha_value_to_register): Likewise.
Yao Qi [Wed, 24 May 2017 21:15:23 +0000 (22:15 +0100)]
Restrict ia64_convert_register_p
gdb:
2017-05-24 Yao Qi <yao.qi@linaro.org>
* ia64-tdep.c (ia64_convert_register_p): Check type's code is
TYPE_CODE_FLT.
Yao Qi [Wed, 24 May 2017 21:15:23 +0000 (22:15 +0100)]
Restrict m68k_convert_register_p
We need to convert register if the type is float. Suppose we get a value
from float point register, but its type is integer, we don't have to convert.
This case may not exist in real code, but exist in my unit test case.
warning: Cannot convert floating-point register value to non-floating-point type.
Self test failed: arch m68k: self-test failed at gdb/git/gdb/findvar.c:1072
ok = gdbarch_register_to_value (gdbarch, frame, regnum, type,
buf.data (), &optim, &unavail);
1072: SELF_CHECK (ok);
gdb:
2017-05-24 Yao Qi <yao.qi@linaro.org>
* m68k-tdep.c (m68k_convert_register_p): Check type's code is
TYPE_CODE_FLT or not.
Yao Qi [Wed, 24 May 2017 21:15:23 +0000 (22:15 +0100)]
Use XCNEW gdbarch_tdep
This patch uses XCNEW gdbarch_tdep instead of XNEW.
gdb:
2017-05-24 Yao Qi <yao.qi@linaro.org>
* alpha-tdep.c (alpha_gdbarch_init): Use XCNEW instead of XNEW.
* avr-tdep.c (avr_gdbarch_init): Likewise.
* bfin-tdep.c (bfin_gdbarch_init): Likewise.
* cris-tdep.c (cris_gdbarch_init): Likewise.
* ft32-tdep.c (ft32_gdbarch_init): Likewise.
* lm32-tdep.c (lm32_gdbarch_init): Likewise.
* m32r-tdep.c (m32r_gdbarch_init): Likewise.
* m68hc11-tdep.c (m68hc11_gdbarch_init): Likewise.
* mep-tdep.c (mep_gdbarch_init): Likewise.
* microblaze-tdep.c (microblaze_gdbarch_init): Likewise.
* mips-tdep.c (mips_gdbarch_init): Likewise.
* mn10300-tdep.c (mn10300_gdbarch_init): Likewise.
* moxie-tdep.c (moxie_gdbarch_init): Likewise.
* msp430-tdep.c (msp430_gdbarch_init): Likewise.
* sh64-tdep.c (sh64_gdbarch_init): Likewise.
* v850-tdep.c (v850_gdbarch_init): Likewise.
Yao Qi [Wed, 24 May 2017 21:15:22 +0000 (22:15 +0100)]
Clear GDB internal state after each unit test
GDB has some global variables, like sentinel_frame,
current_thread_arch, and etc, we need to reset them after each unit
tests.
gdb:
2017-05-24 Yao Qi <yao.qi@linaro.org>
* selftest-arch.c (tests_with_arch): Call registers_changed
and reinit_frame_cache.
* selftest.c (run_self_tests): Likewise.
Yao Qi [Wed, 24 May 2017 16:23:52 +0000 (17:23 +0100)]
Move print_insn_XXX to an opcodes internal header
With the changes done in previous patches, print_insn_XXX functions
don't have to be external visible out of opcodes, because both gdb
and objdump select disassemblers through a single interface.
This patch moves these print_insn_XXX declarations from
include/dis-asm.h to opcodes/disassemble.h, which is a new header
added by this patch.
include:
2017-05-24 Yao Qi <yao.qi@linaro.org>
* dis-asm.h: Move some function declarations to
opcodes/disassemble.h.
opcodes:
2017-05-24 Yao Qi <yao.qi@linaro.org>
* alpha-dis.c: Include disassemble.h, don't include
dis-asm.h.
* avr-dis.c, bfin-dis.c, cr16-dis.c: Likewise.
* crx-dis.c, d10v-dis.c, d30v-dis.c: Likewise.
* disassemble.c, dlx-dis.c, epiphany-dis.c: Likewise.
* fr30-dis.c, ft32-dis.c, h8300-dis.c, h8500-dis.c: Likewise.
* hppa-dis.c, i370-dis.c, i386-dis.c: Likewise.
* i860-dis.c, i960-dis.c, ip2k-dis.c: Likewise.
* iq2000-dis.c, lm32-dis.c, m10200-dis.c: Likewise.
* m10300-dis.c, m32r-dis.c, m68hc11-dis.c: Likewise.
* m68k-dis.c, m88k-dis.c, mcore-dis.c: Likewise.
* metag-dis.c, microblaze-dis.c, mmix-dis.c: Likewise.
* moxie-dis.c, msp430-dis.c, mt-dis.c:
* nds32-dis.c, nios2-dis.c, ns32k-dis.c: Likewise.
* or1k-dis.c, pdp11-dis.c, pj-dis.c: Likewise.
* ppc-dis.c, pru-dis.c, riscv-dis.c: Likewise.
* rl78-dis.c, s390-dis.c, score-dis.c: Likewise.
* sh-dis.c, sh64-dis.c, tic30-dis.c: Likewise.
* tic4x-dis.c, tic54x-dis.c, tic6x-dis.c: Likewise.
* tic80-dis.c, tilegx-dis.c, tilepro-dis.c: Likewise.
* v850-dis.c, vax-dis.c, visium-dis.c: Likewise.
* w65-dis.c, wasm32-dis.c, xc16x-dis.c: Likewise.
* xgate-dis.c, xstormy16-dis.c, xtensa-dis.c: Likewise.
* z80-dis.c, z8k-dis.c: Likewise.
* disassemble.h: New file.
Yao Qi [Wed, 24 May 2017 16:23:52 +0000 (17:23 +0100)]
Use disassemble.c:disassembler select rs6000 disassembler
Nowadays, rs6000 disassembler is selected in different ways in
opcodes and gdb,
opcodes:
case bfd_arch_rs6000:
if (mach == bfd_mach_ppc_620)
disassemble = print_insn_big_powerpc;
else
disassemble = print_insn_rs6000;
break;
gdb:
if (arch == bfd_arch_rs6000)
set_gdbarch_print_insn (gdbarch, print_insn_rs6000);
else
set_gdbarch_print_insn (gdbarch, gdb_print_insn_powerpc);
I am not sure which one is the right one. However, such selection
should be done in one place instead of two.
gdb:
2017-05-24 Yao Qi <yao.qi@linaro.org>
* rs6000-tdep.c (gdb_print_insn_powerpc): Remove.
(rs6000_gdbarch_init): Don't call set_gdbarch_print_insn.
Yao Qi [Wed, 24 May 2017 16:23:52 +0000 (17:23 +0100)]
Use disassemble.c:disassembler select rl78 disassembler
This patch changes rl78 to let disassble.c:disassembler select
disassembler. rl78_get_disassembler doesn't handle the case
that abfd is NULL, so this patch also fix it.
gdb:
2017-05-24 Yao Qi <yao.qi@linaro.org>
* rl78-tdep.c (rl78_gdbarch_init): Don't call
set_gdbarch_print_insn.
opcodes:
2017-05-24 Yao Qi <yao.qi@linaro.org>
* rl78-dis.c (rl78_get_disassembler): If parameter abfd
is NULL, set cpu to E_FLAG_RL78_ANY_CPU.
Yao Qi [Wed, 24 May 2017 16:23:52 +0000 (17:23 +0100)]
Use disassemble.c:disassembler select h8300 disassembler
opcodes/disassble.c:disassembler select h8300 disassembler like this,
if (mach == bfd_mach_h8300h || mach == bfd_mach_h8300hn)
disassemble = print_insn_h8300h;
else if (mach == bfd_mach_h8300s
|| mach == bfd_mach_h8300sn
|| mach == bfd_mach_h8300sx
|| mach == bfd_mach_h8300sxn)
disassemble = print_insn_h8300s;
else
disassemble = print_insn_h8300;
which is the same as what gdb/h8300-tdpe.c does,
switch (info.bfd_arch_info->mach)
{
case bfd_mach_h8300:
...
set_gdbarch_print_insn (gdbarch, print_insn_h8300);
case bfd_mach_h8300h:
case bfd_mach_h8300hn:
...
set_gdbarch_print_insn (gdbarch, print_insn_h8300h);
case bfd_mach_h8300s:
case bfd_mach_h8300sn:
...
set_gdbarch_print_insn (gdbarch, print_insn_h8300s);
so we can leave disassble.c:disassembler doing the selection.
gdb:
2017-05-24 Yao Qi <yao.qi@linaro.org>
* h8300-tdep.c (h8300_gdbarch_init): Don't call
set_gdbarch_print_insn.
Yao Qi [Wed, 24 May 2017 16:23:52 +0000 (17:23 +0100)]
Delegate opcodes to select disassembler in GDB
This patch changes GDB to use disassembler selected by opcodes in
default, so that we don't have to duplicate the selection logic again
in GDB side. For example, gdb/score-tdep.c has
static int
score_print_insn (bfd_vma memaddr, struct disassemble_info *info)
{
if (info->endian == BFD_ENDIAN_BIG)
return print_insn_big_score (memaddr, info);
else
return print_insn_little_score (memaddr, info);
}
and opcodes/disassemble.c has the same logic,
case bfd_arch_score:
if (big)
disassemble = print_insn_big_score;
else
disassemble = print_insn_little_score;
This patch removes the logic in GDB and calls
opcodes/disassemble.c:disassembler in default to select disassembler.
gdb:
2017-05-24 Yao Qi <yao.qi@linaro.org>
* alpha-tdep.c (alpha_gdbarch_init): Don't call
set_gdbarch_print_insn.
* arc-tdep.c (arc_gdbarch_init): Likewise.
* arch-utils.c: include dis-asm.h.
(default_print_insn): New function.
* arch-utils.h (default_print_insn): Declare.
* avr-tdep.c (avr_gdbarch_init): Don't call set_gdbarch_print_insn.
* bfin-tdep.c (bfin_gdbarch_init): Likewise.
* cris-tdep.c (cris_delayed_get_disassembler): Remove.
(cris_gdbarch_init): Don't call set_gdbarch_print_insn.
* frv-tdep.c (frv_gdbarch_init): Likewise.
* ft32-tdep.c (ft32_gdbarch_init): Likewise.
* gdbarch.sh (print_insn): Use default_print_insn.
* gdbarch.c: Regenerated.
* hppa-tdep.c (hppa_gdbarch_init): Likewise.
* iq2000-tdep.c (iq2000_gdbarch_init): Likewise.
* lm32-tdep.c (lm32_gdbarch_init): Likewise.
* m32c-tdep.c (m32c_gdbarch_init): Likewise.
* m32r-tdep.c (m32r_gdbarch_init): Likewise.
* m68hc11-tdep.c (gdb_print_insn_m68hc11): Remove.
(m68hc11_gdbarch_init): Don't call set_gdbarch_print_insn.
* m68k-tdep.c (m68k_gdbarch_init): Likewise.
* m88k-tdep.c (m88k_gdbarch_init): Likewise.
* microblaze-tdep.c (microblaze_gdbarch_init): Likewise.
* mn10300-tdep.c (mn10300_gdbarch_init): Likewise.
* moxie-tdep.c (moxie_gdbarch_init): Likewise.
* msp430-tdep.c (msp430_gdbarch_init): Likewise.
* mt-tdep.c (mt_gdbarch_init): Likewise.
* nds32-tdep.c (nds32_gdbarch_init): Likewise.
* nios2-tdep.c (nios2_print_insn): Remove.
(nios2_gdbarch_init): Don't call set_gdbarch_print_insn.
* rx-tdep.c (rx_gdbarch_init): Likewise.
* s390-linux-tdep.c (s390_gdbarch_init): Likewise.
* score-tdep.c (score_print_insn): Remove.
(score_gdbarch_init): Don't call set_gdbarch_print_insn.
* sh-tdep.c (sh_gdbarch_init): Likewise.
* sh64-tdep.c (sh64_gdbarch_init): Likewise.
* sparc-tdep.c (sparc32_gdbarch_init): Likewise.
* tic6x-tdep.c (tic6x_print_insn): Remove.
(tic6x_gdbarch_init): Don't call set_gdbarch_print_insn.
* tilegx-tdep.c (tilegx_gdbarch_init): Likewise.
* v850-tdep.c (v850_gdbarch_init): Likewise.
* vax-tdep.c (vax_gdbarch_init): Likewise.
* xstormy16-tdep.c (xstormy16_gdbarch_init): Likewise.
* xtensa-tdep.c (xtensa_gdbarch_init): Likewise.
Yao Qi [Wed, 24 May 2017 16:23:52 +0000 (17:23 +0100)]
Refactor disassembler selection
Nowadays, opcodes/disassemble.c:disassembler selects the proper
disassembler according to ABFD only. However, it actually
selects disassemblers according to arch, mach, endianess, and
abfd. This patch adds them to the parameters of disassembler,
so that its caller can still select disassemblers in case that
abfd is NULL (a typical case in GDB).
There isn't any functionality change.
binutils:
2017-05-24 Yao Qi <yao.qi@linaro.org>
* objdump.c (disassemble_data): Caller update.
include:
2017-05-24 Yao Qi <yao.qi@linaro.org>
* dis-asm.h (disassembler): Update declaration.
opcodes:
2017-05-24 Yao Qi <yao.qi@linaro.org>
* disassemble.c (disassembler): Add arguments a, big and mach.
Use them.
sim/common:
2017-05-24 Yao Qi <yao.qi@linaro.org>
* sim-trace.c (trace_disasm): Caller update.
GDB Administrator [Wed, 24 May 2017 00:00:45 +0000 (00:00 +0000)]
Automatic date update in version.in
John Baldwin [Tue, 18 Apr 2017 17:49:44 +0000 (10:49 -0700)]
Use mips_regnum instead of constants for FreeBSD/mips register operations.
gdb/ChangeLog:
* mips-fbsd-tdep.c (MIPS_PC_REGNUM): Remove.
(MIPS_FP0_REGNUM): Remove.
(MIPS_FSR_REGNUM): Remove.
(mips_fbsd_supply_fpregs): Use mips_regnum.
(mips_fbsd_supply_gregs): Likewise.
(mips_fbsd_collect_fpregs): Likewise.
(mips_fbsd_collect_gregs): Likewise.
John Baldwin [Tue, 18 Apr 2017 17:49:44 +0000 (10:49 -0700)]
Cleanups to FreeBSD/mips native register operations.
Compare against the "raw" PC register number instead of the cooked
register number when determining if a register was handled by
PT_GETREGS. Previously the register fetch/store operations only tried
PT_GETREGS to fetch any individual register. The result was that
fetching or storing an individual register not covered by PT_GETREGS
(such as floating point registers) did not work.
While here, remove an early exit to simplify the code flow from the
PT_GETREGS / PT_SETREGS case, and add a getfpregs_supplies similar to
getregs_supplies to describe the registers supplied by PT_GETFPREGS
and PT_SETFPREGS.
gdb/ChangeLog:
* mips-fbsd-nat.c (getregs_supplies): Fix upper bound comparison.
(getpfpregs_supplies): New function.
(mips_fbsd_fetch_inferior_registers): Remove early exit and use
getfpregs_supplies.
(mips_fbsd_store_inferior_registers): Likewise.
H.J. Lu [Tue, 23 May 2017 13:49:35 +0000 (06:49 -0700)]
x86: Update notrackbad tests for non-ELF targets
* gas/testsuite/gas/i386/notrackbad.l: Updated for non-ELF
targets.
* gas/testsuite/gas/i386/x86-64-notrackbad.l: Likewise.
Alan Modra [Mon, 22 May 2017 12:01:34 +0000 (21:31 +0930)]
PR21503, Gold doesn't create linker stub symbols on ppc64
PR 21503
* options.h: Add --emit-stub-syms option.
* powerpc.cc (object_id): New.
(Powerpc_relobj): Add uniq_ and accessor. Sort variables for
better packing.
(Powerpc_dynobj): Sort variables for better packing.
(Target_powerpc::define_local): New function.
(Target_powerpc::group_sections): Pass stub table size to
Stub_table constructor.
(Target_powerpc::do_relax): Define stub and glink symbols.
(Stub_table): Add uniq_ variable, and id param to constructor.
(Stub_table::Plt_stub_ent): Add indx_ variable.
(Stub_table::Branch_stub_entries): Move typedef earlier.
(Stub_table::branch_stub_size): Replace "to" parameter with a
Branch_stub_entries iterator.
(Stub_table::add_long_branch_entry): Adjust to suit.
(Stub_table::add_plt_call_entry): Set indx_.
(Stub_table::define_stub_syms): New function.
claziss [Tue, 23 May 2017 10:18:11 +0000 (12:18 +0200)]
[ARC] Reformat error messages.
gas/
2017-05-23 Claudiu Zissulescu <claziss@synopsys.com>
* config/tc-arc.c (md_apply_fix): Use as_bad_where.
(assemble_insn): Use as_bad.
claziss [Tue, 23 May 2017 10:18:10 +0000 (12:18 +0200)]
[ARC] Fix fall through warnings.
bfd/
2017-05-23 Dilian Palauzov <git-dpa@aegee.org>
* elf32-arc.c (arc_elf_merge_attributes): Add fall through
comments.
claziss [Tue, 23 May 2017 10:18:10 +0000 (12:18 +0200)]
[ARC] Update MAX_INSN_FLGS.
It is required to parse instructions like ldb.x.a.di.
include/
2017-05-23 Claudiu Zissulescu <claziss@synopsys.com>
* opcode/arc.h (MAX_INSN_FLGS): Update to 4.
GDB Administrator [Tue, 23 May 2017 00:00:37 +0000 (00:00 +0000)]
Automatic date update in version.in
Andrew Burgess [Mon, 15 May 2017 09:11:57 +0000 (10:11 +0100)]
gdb: Document vMustReplyEmpty remote packet
Add mention of the vMustReplyEmpty to the remote serial protocol
documentation. It is important that this packet be treated in the same
fashion as any other unknown 'v' packet, and I have tried to reflect
this in the description of the packet, it is not simply the case that we
_must_ return the empty string for this packet.
As the intention is that we should treat this packet as unknown then an
argument could be made that we should not document it, however, for
someone implementing a gdbserver from scratch, seeing an undocumented
packet arrive from gdb is confusing, and will probably cause them to
have to read the code in order to check how this packet should be
handled, which is not ideal.
gdb/doc/ChangeLog:
* gdb.texinfo (Packets): Document vMustReplyEmpty packet.
H.J. Lu [Mon, 22 May 2017 18:02:46 +0000 (11:02 -0700)]
x86: Add NOTRACK prefix support
For register indirect branches, NOTRACK prefix (0x3e), which is also
the DS segment register prefix, can be used to ignore the CET indirect
branch track.
gas/
* config/tc-i386.c (REX_PREFIX): Changed to 7.
(NOTRACK_PREFIX): New.
(MAX_PREFIXES): Changed to 8.
(_i386_insn): Add notrack_prefix.
(PREFIX_GROUP): Add PREFIX_DS.
(add_prefix): Return PREFIX_DS for DS_PREFIX_OPCODE.
(md_assemble): Check if NOTRACK prefix is supported.
(parse_insn): Set notrack_prefix and issue an error for
other prefixes after NOTRACK prefix.
* testsuite/gas/i386/i386.exp: Run tests for NOTRACK prefix.
* testsuite/gas/i386/notrack-intel.d: New file.
* testsuite/gas/i386/notrack.d: Likewise.
* testsuite/gas/i386/notrack.s: Likewise.
* testsuite/gas/i386/notrackbad.l: Likewise.
* testsuite/gas/i386/notrackbad.s: Likewise.
* testsuite/gas/i386/x86-64-notrack-intel.d: Likewise.
* testsuite/gas/i386/x86-64-notrack.d: Likewise.
* testsuite/gas/i386/x86-64-notrack.s: Likewise.
* testsuite/gas/i386/x86-64-notrackbad.l: Likewise.
* testsuite/gas/i386/x86-64-notrackbad.s: Likewise.
include/
* include/opcode/i386.h (NOTRACK_PREFIX_OPCODE): New.
opcodes/
* i386-dis.c (NOTRACK_Fixup): New.
(NOTRACK): Likewise.
(NOTRACK_PREFIX): Likewise.
(last_active_prefix): Likewise.
(reg_table): Use NOTRACK on indirect call and jmp.
(ckprefix): Set last_active_prefix.
(prefix_name): Return "notrack" for NOTRACK_PREFIX.
* i386-gen.c (opcode_modifiers): Add NoTrackPrefixOk.
* i386-opc.h (NoTrackPrefixOk): New.
(i386_opcode_modifier): Add notrackprefixok.
* i386-opc.tbl: Add NoTrackPrefixOk to indirect call and jmp.
Add notrack.
* i386-tbl.h: Regenerated.
H.J. Lu [Mon, 22 May 2017 14:41:16 +0000 (07:41 -0700)]
x86-64: Use dynobj instead of htab->elf.dynobj
* elf64-x86-64.c (elf_x86_64_link_setup_gnu_properties): Use
dynobj instead of htab->elf.dynobj.
Jiong Wang [Mon, 22 May 2017 08:50:29 +0000 (09:50 +0100)]
[AArch64, ld] Support ILP32 triplet aarch64*-linux-gnu_ilp32
This patch allows AArch64 LD defaulting to ILP32 if it is configured with
aarch64*-linux-gnu_ilp32.
ld/
* configure.tgt: Set "targ_emul" to "aarch64linux32b" for
aarch64_be-*-linux-gnu_ilp32. Set "targ_emul" to "aarch64linux32" for
aarch64-*-linux-gnu_ilp32.
Jiong Wang [Mon, 22 May 2017 08:50:19 +0000 (09:50 +0100)]
[AArch64, gas] Support ILP32 triplet aarch64*-linux-gnu_ilp32
This patch allows AArch64 GAS defaulting to ILP32 if it is configured with
aarch64*-linux-gnu_ilp32.
"md_after_parse_args" is implemented to update ABI into ILP32 if DEFAULT_ARCH is
"aarch64:32".
gas/
* configure.tgt: Set "arch" to "aarch64" if ${cpu} equals "aarch64".
Recognize the new triplet name aarch64*-linux-gnu_ilp32.
* configure.ac: Output DEFAULT_ARCH macro for AArch64.
* configure: Regenerate.
* config/tc-aarch64.h (aarch64_after_parse_args): New declaration.
(md_after_parse_args): New define.
* config/tc-aarch64.c (aarch64_abi_type): New enumeration
AARCH64_ABI_NONE.
(DEFAULT_ARCH): New define.
(aarch64_abi): Set default value to AARCH64_ABI_NONE.
(aarch64_after_parse_args): New function.
Pedro Alves [Mon, 22 May 2017 10:58:19 +0000 (11:58 +0100)]
gdb: Add John Baldwin as FreeBSD Maintainer
gdb/ChangeLog:
2017-05-22 Pedro Alves <palves@redhat.com>
* MAINTAINERS (Host/Native): Add John Baldwin as FreeBSD
maintainer.
Alan Hayward [Mon, 22 May 2017 08:23:22 +0000 (09:23 +0100)]
Add PPC_MAX_REGISTER_SIZE
gdb/
* ppc-linux-nat.c (fetch_register): Use PPC_MAX_REGISTER_SIZE.
(store_register): Likewise.
* ppc-sysv-tdep.c (ppc_sysv_abi_push_dummy_call): Likewise.
(get_decimal_float_return_value): Likewise.
(do_ppc_sysv_return_value): Likewise.
(ppc64_sysv_abi_push_integer): Likewise.
(ppc64_sysv_abi_push_freg): Likewise.
(ppc64_sysv_abi_return_value_base): Likewise.
(ppc64_sysv_abi_return_value): Likewise.
* rs6000-aix-tdep.c (rs6000_push_dummy_call): Likewise.
* rs6000-lynx178-tdep.c (rs6000_lynx178_push_dummy_call): Likewise.
* rs6000-nat.c: Likewise.
* rs6000-tdep.c (rs6000_register_to_value): Likewise.
(rs6000_value_to_register): Likewise.
* ppc-tdep.h (PPC_MAX_REGISTER_SIZE): Add.
GDB Administrator [Mon, 22 May 2017 00:00:35 +0000 (00:00 +0000)]
Automatic date update in version.in
Tom Tromey [Sun, 21 May 2017 23:00:10 +0000 (17:00 -0600)]
Print Rust unsized array types a bit more nicely
It's a bit difficult to create an unsized array type in Rust, but if
you do, right now ptype will show something like "[u8; ]". It really
should print "[u8]", though, which is what this patch implements.
This is part of PR 21466.
Built and regtested on x86-64 Fedora 25. I'm checking this in.
ChangeLog
2017-05-21 Tom Tromey <tom@tromey.com>
PR rust/21466:
* rust-lang.c (rust_print_type) <TYPE_CODE_ARRAY>: Print unsized
arrays as "[T]", not "[T; ]".
testsuite/ChangeLog
2017-05-21 Tom Tromey <tom@tromey.com>
PR rust/21466:
* gdb.rust/unsized.exp: New file.
* gdb.rust/unsized.rs: New file.
GDB Administrator [Sun, 21 May 2017 00:00:39 +0000 (00:00 +0000)]
Automatic date update in version.in
Jose E. Marchesi [Sat, 20 May 2017 06:45:29 +0000 (23:45 -0700)]
binutils: remove sparc64/mips64 workaround in objcopy build notes merge code
This patch removes a workaround recently installed in objcopy that
avoided removing duplicated notes in targets for which the number of
internal relocations may be bigger than the number of external
relocations. With the recent fixes in sparc64 and mips64, this
workaround is no longer necessary.
2017-05-19 Jose E. Marchesi <jose.marchesi@oracle.com>
* objcopy.c (merge_gnu_build_notes): Remove workaround that
prevented deleting relocations in duplicated notes in mips64 and
sparc.
Tom Tromey [Sun, 14 May 2017 17:12:14 +0000 (11:12 -0600)]
Use watchpoint's language when re-parsing expression
PR rust/21484 notes that watch -location does not work with Rust:
(gdb) watch -location a
syntax error in expression, near `) 0x00007fffffffe0f4'.
update_watchpoint tries to tell gdb that the new expression it creates
has C syntax:
/* The above expression is in C. */
b->language = language_c;
However, update_watchpoint doesn't actually use this language when
re-parsing the expression.
Originally I was going to fix this by saving and restoring the
language in update_watchpoint, but this regressed
gdb.dlang/watch-loc.exp, because the constructed expression actually
has D syntax (specifically the name is not parseable by C).
Next I looked at directly constructing an expression, and not relying
on the parser at all; but it seemed to me that upon a re-set, we'd
want to reparse the type, and there is no existing API to do this
correctly.
So, in the end I made a hook to let each language choose what
expression to use. I made all the languages other than Rust use the C
expression, because that is the status quo ante. However, this is
probably not truly correct. After this patch, at least, it is easy to
correct by someone who knows the language(s) in question.
Regtested by the buildbot.
ChangeLog
2017-05-19 Tom Tromey <tom@tromey.com>
PR rust/21484:
* rust-lang.c (exp_descriptor_rust): New function.
(rust_language_defn): Use it.
* p-lang.c (pascal_language_defn): Update.
* opencl-lang.c (opencl_language_defn): Update.
* objc-lang.c (objc_language_defn): Update.
* m2-lang.c (m2_language_defn): Update.
* language.h (struct language_defn)
<la_watch_location_expression>: New member.
* language.c (unknown_language_defn, auto_language_defn)
(local_language_defn): Update.
* go-lang.c (go_language_defn): Update.
* f-lang.c (f_language_defn): Update.
* d-lang.c (d_language_defn): Update.
* c-lang.h (c_watch_location_expression): Declare.
* c-lang.c (c_watch_location_expression): New function.
(c_language_defn, cplus_language_defn, asm_language_defn)
(minimal_language_defn): Use it.
* breakpoint.c (watch_command_1): Call
la_watch_location_expression.
* ada-lang.c (ada_language_defn): Update.
testsuite/ChangeLog
2017-05-19 Tom Tromey <tom@tromey.com>
PR rust/21484:
* gdb.rust/watch.exp: New file.
* gdb.rust/watch.rs: New file.
GDB Administrator [Sat, 20 May 2017 00:00:43 +0000 (00:00 +0000)]
Automatic date update in version.in
Maciej W. Rozycki [Fri, 19 May 2017 14:11:31 +0000 (15:11 +0100)]
MIPS/BFD: For n64 hold the number of internal relocs in `->reloc_count'
Revert parts of commit
fee24f1c5bfe ("objdump improvements for mips
elf64"), <https://sourceware.org/ml/binutils/2003-03/msg00108.html>, and
make the `->reloc_count' member of `struct bfd_section' hold the actual
number of internal relocations stored in its `->relocation' vector. To
do so adjust `mips_elf64_slurp_one_reloc_table' to set `->reloc_count'
to the actual number of internal relocations retrieved and discard
`mips_elf64_canonicalize_reloc', `mips_elf64_canonicalize_dynamic_reloc'
and their corresponding target macros. Contrary to the description of
`mips_elf64_slurp_one_reloc_table', adjusted appropriately, this makes
generic relocation processing code happy and satisfies the "merge notes
section" binutils test case.
Add extra binutils test cases to expand the coverage of the generic
"merge notes section" test case, now passing with the n64 ABI, across
the MIPS o32, n32 and n64 ABIs regardless of the default ABI selected in
target configuration, and also to verify correctness of the relocations
produced. Conversely, do not provide any additional test cases for the
original issue addressed with the commit referred:
- objdump would display only 1/3 of the total number of relocations,
because it used the external relocation count, but each external
relocation is brought in as 3 internal relocations.
as n64 ABI relocation processing with `objdump -r' and `objdump -R' is
already widely covered across the GAS and LD test suites.
bfd/
* elf64-mips.c (mips_elf64_canonicalize_reloc): Remove prototype
and function.
(mips_elf64_canonicalize_dynamic_reloc): Likewise.
(mips_elf64_slurp_one_reloc_table): Set `reloc_count' to the
actual number of internal relocations retrieved. Adjust
function description.
(bfd_elf64_canonicalize_reloc): Remove macro.
(bfd_elf64_canonicalize_dynamic_reloc): Likewise.
binutils/
* testsuite/binutils-all/mips/mips-note-2.d: New test.
* testsuite/binutils-all/mips/mips-note-2r.d: New test.
* testsuite/binutils-all/mips/mips-note-2-n32.d: New test.
* testsuite/binutils-all/mips/mips-note-2-n64.d: New test.
* testsuite/binutils-all/mips/mips-note-2r-n32.d: New test.
* testsuite/binutils-all/mips/mips-note-2r-n64.d: New test.
* testsuite/binutils-all/mips/mips.exp: Define `has_newabi'.
Run the new tests.
Maciej W. Rozycki [Fri, 19 May 2017 14:08:16 +0000 (15:08 +0100)]
binutils/testsuite: Permit the reuse of dump patterns
Complement commit
89210bdc8fd2 ("GAS: Permit the reuse of dump
patterns"), <https://sourceware.org/ml/binutils/2010-07/msg00269.html>,
and commit
ef2b5578f693 ("MIPS: Enable NewABI tests for SDE targets"),
<https://sourceware.org/ml/binutils/2012-08/msg00017.html>, and like the
GAS and LD versions make the binutils version of `run_dump_test' also
support the `dump' keyword, for reusing dump patterns between tests.
binutils/
* testsuite/lib/utils-lib.exp (run_dump_test): Handle the `dump'
option.
Jose E. Marchesi [Fri, 19 May 2017 16:27:08 +0000 (09:27 -0700)]
binutils: support for the SPARC M8 processor
This patch adds support for the new SPARC M8 processor (implementing OSA
2017) to binutils.
New instructions:
- Dictionary Unpack
+ dictunpack
- Partitioned Compare with shifted result
+ Signed variants: fpcmp{le,gt,eq,ne}{8,16,32}shl
+ Unsigned variants: fpcmpu{le,gt}{8,16,32}shl
- Partitioned Dual-Equal compared, with shifted result
+ fpcmpde{8,16,32}shl
- Partitioned Unsigned Range Compare, with shifted result
+ fpcmpur{8,16,32}shl
- 64-bit shifts on Floating-Point registers
+ fps{ll,ra,rl}64x
- Misaligned loads and stores
+ ldm{sh,uh,sw,uw,x,ux}
+ ldm{sh,uh,sw,uw,x,ux}a
+ ldmf{s,d}
+ ldmf{s,d}a
+ stm{h,w,x}
+ stm{h,w,x}a
+ stmf{s,d}
+ stmf{s,d}a
- Oracle Numbers
+ on{add,sub,mul,div}
- Reverse Bytes/Bits
+ revbitsb
+ revbytes{h,w,x}
- Run-Length instructions
+ rle_burst
+ rle_length
- New crypto instructions
+ sha3
- Instruction to read the new register %entropy
+ rd %entropy
New Alternate Address Identifiers:
- 0x24, #ASI_CORE_COMMIT_COUNT
- 0x24, #ASI_CORE_SELECT_COUNT
- 0x48, #ASI_ARF_ECC_REG
- 0x53, #ASI_ITLB_PROBE
- 0x58, #ASI_DSFAR
- 0x5a, #ASI_DTLB_PROBE_PRIMARY
- 0x5b, #ASI_DTLB_PROBE_REAL
- 0x64, #ASI_CORE_SELECT_COMMIT_NHT
The new assembler command-line options for selecting the M8 architecture
are:
-Av9m8 or -Asparc6 for 64-bit binaries.
-Av8plusm8 for 32-bit (v8+) binaries.
The corresponding disassembler command-line options are:
-msparc:v9m8 for 64-bit binaries.
-msparc:v8plusm8 for 32-bit (v8+) binaries.
Tested for regressions in the following targets:
sparc-aout sparc-linux sparc-vxworks sparc64-linux
bfd/ChangeLog:
2017-05-19 Jose E. Marchesi <jose.marchesi@oracle.com>
* archures.c (bfd_mach_sparc_v9m8): Define.
(bfd_mach_sparc_v8plusm8): Likewise.
(bfd_mach_sparc_v9_p): Adjust to M8.
(bfd_mach_sparc_64bit_p): Likewise.
* aoutx.h (machine_type): Handle bfd_mach_sparc_v9m8 and
bfd_mach_sparc_v8plusm8.
* bfd-in2.h: Regenerated.
* cpu-sparc.c (arch_info_struct): Entries for sparc:v9m8 and
sparc:v8plusm8.
* elfxx-sparc.c (_bfd_sparc_elf_object_p): Handle
bfd_mach_sparc_v8plusm8 and bfd_mach_sparc_v9m8 using the new hw
capabilities ONADDSUB, ONMUL, ONDIV, DICTUNP, FPCPSHL, RLE and
SHA3.
* elf32-sparc.c (elf32_sparc_final_write_processing): Handle
bfd_mach_sparc_v8plusm8.
binutils/ChangeLog:
2017-05-19 Jose E. Marchesi <jose.marchesi@oracle.com>
* NEWS: Mention the SPARC M8 support.
gas/ChangeLog:
2017-05-19 Jose E. Marchesi <jose.marchesi@oracle.com>
* config/tc-sparc.c (sparc_arch_table): Entries for `sparc6',
`v9m8' and `v8plusm8'.
(sparc_md_end): Handle SPARC_OPCODE_ARCH_M8.
(get_hwcap_name): Support the M8 hardware capabilities.
(sparc_ip): Handle new operand types.
* doc/c-sparc.texi (Sparc-Opts): Document -Av9m8, -Av8plusm8 and
-Asparc6, and the corresponding -xarch aliases.
* testsuite/gas/sparc/sparc6.s: New file.
* testsuite/gas/sparc/sparc6.d: Likewise.
* testsuite/gas/sparc/sparc6-diag.s: Likewise.
* testsuite/gas/sparc/sparc6-diag.l: Likewise.
* testsuite/gas/sparc/fpcmpshl.s: Likewise.
* testsuite/gas/sparc/fpcmpshl.d: Likewise.
* testsuite/gas/sparc/fpcmpshl-diag.s: Likewise.
* testsuite/gas/sparc/fpcmpshl-diag.l: Likewise.
* testsuite/gas/sparc/ldm-stm.s: Likewise.
* testsuite/gas/sparc/ldm-stm.d: Likewise.
* testsuite/gas/sparc/ldm-stm-diag.s: Likewise.
* testsuite/gas/sparc/ldm-stm-diag.l: Likewise.
* testsuite/gas/sparc/ldmf-stmf.s: Likewise.
* testsuite/gas/sparc/ldmf-stmf.d: Likewise.
* testsuite/gas/sparc/ldmf-stmf-diag.s: Likewise.
* testsuite/gas/sparc/ldmf-stmf-diag.l: Likewise.
* testsuite/gas/sparc/on.s: Likewise.
* testsuite/gas/sparc/on.d: Likewise.
* testsuite/gas/sparc/on-diag.s: Likewise.
* testsuite/gas/sparc/on-diag.l: Likewise.
* testsuite/gas/sparc/rle.s: Likewise.
* testsuite/gas/sparc/rle.d: Likewise.
* testsuite/gas/sparc/sparc.exp (gas_64_check): Run new tests.
* testsuite/gas/sparc/rdasr.s: Add test for RDENTROPY.
* testsuite/gas/sparc/rdasr.d: Likewise.
include/ChangeLog:
2017-05-19 Jose E. Marchesi <jose.marchesi@oracle.com>
* elf/sparc.h (ELF_SPARC_HWCAP2_SPARC6): Define.
(ELF_SPARC_HWCAP2_ONADDSUB): Likewise.
(ELF_SPARC_HWCAP2_ONMUL): Likewise.
(ELF_SPARC_HWCAP2_ONDIV): Likewise.
(ELF_SPARC_HWCAP2_DICTUNP): Likewise.
(ELF_SPARC_HWCAP2_FPCMPSHL): Likewise.
(ELF_SPARC_HWCAP2_RLE): Likewise.
(ELF_SPARC_HWCAP2_SHA3): Likewise.
* opcode/sparc.h (sparc_opcode_arch_val): Add SPARC_OPCODE_ARCH_M8
and adjust SPARC_OPCODE_ARCH_MAX.
(HWCAP2_SPARC6): Define.
(HWCAP2_ONADDSUB): Likewise.
(HWCAP2_ONMUL): Likewise.
(HWCAP2_ONDIV): Likewise.
(HWCAP2_DICTUNP): Likewise.
(HWCAP2_FPCMPSHL): Likewise.
(HWCAP2_RLE): Likewise.
(HWCAP2_SHA3): Likewise.
(OPM): Likewise.
(OPMI): Likewise.
(ONFCN): Likewise.
(REVFCN): Likewise.
(SIMM10): Likewise.
opcodes/ChangeLog:
2017-05-19 Jose E. Marchesi <jose.marchesi@oracle.com>
* sparc-dis.c (MASK_V9): Include SPARC_OPCODE_ARCH_M8.
(X_IMM2): Define.
(compute_arch_mask): Handle bfd_mach_sparc_v8plusm8 and
bfd_mach_sparc_v9m8.
(print_insn_sparc): Handle new operand types.
* sparc-opc.c (MASK_M8): Define.
(v6): Add MASK_M8.
(v6notlet): Likewise.
(v7): Likewise.
(v8): Likewise.
(v9): Likewise.
(v9a): Likewise.
(v9b): Likewise.
(v9c): Likewise.
(v9d): Likewise.
(v9e): Likewise.
(v9v): Likewise.
(v9m): Likewise.
(v9andleon): Likewise.
(m8): Define.
(HWS_VM8): Define.
(HWS2_VM8): Likewise.
(sparc_opcode_archs): Add entry for "m8".
(sparc_opcodes): Add OSA2017 and M8 instructions
dictunpack, fpcmp{ule,ugt,eq,ne,de,ur}{8,16,32}shl,
fpx{ll,ra,rl}64x,
ldm{sh,uh,sw,uw,x,ux}, ldm{sh,uh,sw,uw,x,ux}a, ldmf{s,d},
ldmf{s,d}a, on{add,sub,mul,div}, rdentropy, revbitsb,
revbytes{h,w,x}, rle_burst, rle_length, sha3, stm{h,w,x},
stm{h,w,x}a, stmf{s,d}, stmf{s,d}a.
(asi_table): New M8 ASIs ASI_CORE_COMMIT_COUNT,
ASI_CORE_SELECT_COUNT, ASI_ARF_ECC_REG, ASI_ITLB_PROBE, ASI_DSFAR,
ASI_DTLB_PROBE_PRIMARY, ASI_DTLB_PROBE_REAL,
ASI_CORE_SELECT_COMMIT_NHT.
H.J. Lu [Fri, 19 May 2017 15:36:06 +0000 (08:36 -0700)]
x86: Add GC testcases with property sections
Verify that debug section is removed by garbage collection when there
is a .note.gnu.property section.
* testsuite/ld-i386/i386.exp: Run property-x86-4a and
property-x86-4b.
* testsuite/ld-x86-64/x86-64.exp: Likewise.
* testsuite/ld-i386/property-x86-4a.d: New file.
* testsuite/ld-i386/property-x86-4a.s: Likewise.
* testsuite/ld-i386/property-x86-4b.d: Likewise.
* testsuite/ld-i386/property-x86-4b.s: Likewise.
* testsuite/ld-x86-64/property-x86-4a.d: Likewise.
* testsuite/ld-x86-64/property-x86-4a.s: Likewise.
* testsuite/ld-x86-64/property-x86-4b.d: Likewise.
* testsuite/ld-x86-64/property-x86-4b.s: Likewise.
Jose E. Marchesi [Fri, 19 May 2017 13:59:41 +0000 (06:59 -0700)]
gas: fix tests call-relax and asi-bump-warn in 32-bit SPARC ELF targets
Tested in targets:
sparc-aout sparc-linux sparc-vxworks sparc64-linux
2017-05-19 Jose E. Marchesi <jose.marchesi@oracle.com>
* testsuite/gas/sparc/call-relax.d: Support 32-bit targets.
* testsuite/gas/sparc/sparc.exp (gas_64_check): Use -64 to
run asi-bump-warn.
eorg-Johann Lay [Fri, 19 May 2017 14:06:33 +0000 (15:06 +0100)]
Update avrxmega3 linker emulation to support avrxmega2 devices with flash memory visible in the SRAM address range.
PR ld/21472
ld * emulparams/avrxmega3.sh (RODATA_PM_OFFSET): Set to 0x8000.
* scripttempl/avr.sc
(__RODATA_PM_OFFSET__) [RODATA_PM_OFFSET]: Use RODATA_PM_OFFSET
as default if not already defined.
(.data) [!RODATA_PM_OFFSET]: Don't include .rodata and friends.
(.rodata) [RODATA_PM_OFFSET]: Put at an offset of
__RODATA_PM_OFFSET__.
gas * config/tc-avr.c (mcu_types): Add entries for: attiny416,
attiny417, attiny816, attiny817.
Rainer Orth [Fri, 19 May 2017 13:08:45 +0000 (15:08 +0200)]
Fix tui compilation with Solaris libcurses: clear define (PR tui/21482)
On both mainline and the 8.0 branch, gdb compilation fails on Solaris 10
with the native libcurses like this:
In file included from /vol/src/gnu/gdb/gdb-8.0-branch/local/gdb/gdb_curses.h:42:
0,
from /vol/src/gnu/gdb/gdb-8.0-branch/local/gdb/tui/tui-data.h:2
6,
from /vol/src/gnu/gdb/gdb-8.0-branch/local/gdb/tui/tui-disasm.c
:31:
/vol/src/gnu/gdb/gdb-8.0-branch/local/gdb/tui/tui-disasm.c: In function `CORE_A
DDR tui_disassemble(gdbarch*, tui_asm_line*, CORE_ADDR, int)':
/vol/src/gnu/gdb/gdb-8.0-branch/local/gdb/tui/tui-disasm.c:71:19: error: `class
string_file' has no member named `wclear'; did you mean `clear'?
gdb_dis_out.clear ();
^
/vol/src/gnu/gdb/gdb-8.0-branch/local/gdb/tui/tui-disasm.c:78:19: error: `class
string_file' has no member named `wclear'; did you mean `clear'?
gdb_dis_out.clear ();
^
make[2]: *** [Makefile:1927: tui-disasm.o] Error 1
It turned out this happens because <curses.h> has
#define clear() wclear(stdscr)
This can be avoided by defining NOMACROS, which the patch below does.
ncurses potentially has a similar problem, which can be avoided by defining
NCURSES_NOMACROS.
PR tui/21482
* gdb_curses.h (NOMACROS): Define.
(NCURSES_NOMACROS): Define.
Rainer Orth [Fri, 19 May 2017 12:16:55 +0000 (14:16 +0200)]
Fix tui compilation with Solaris libcurses: non-const last arg to mvwaddstr (PR tui/21482)
On both mainline and the 8.0 branch, gdb compilation fails on Solaris 10
with the native libcurses in gdb/tui for several instances of the same problem:
/vol/src/gnu/gdb/gdb-8.0-branch/local/gdb/tui/tui-winsource.c: In function `void tui_erase_source_content(tui_win_info*, int)':
/vol/src/gnu/gdb/gdb-8.0-branch/local/gdb/tui/tui-winsource.c:257:18: error: invalid conversion from `const char*' to `char*' [-fpermissive]
no_src_str);
^
In file included from /vol/src/gnu/gdb/gdb-8.0-branch/local/gdb/gdb_curses.h:42:0,
from /vol/src/gnu/gdb/gdb-8.0-branch/local/gdb/tui/tui-data.h:26,
from /vol/src/gnu/gdb/gdb-8.0-branch/local/gdb/tui/tui-winsource.c:33:
/vol/gcc-7/lib/gcc/sparc-sun-solaris2.10/7.1.0/include-fixed/curses.h:699:12: note: initializing argument 4 of `int mvwaddstr(WINDOW*, int, int, char*)'
extern int mvwaddstr(WINDOW *, int, int, char *);
^~~~~~~~~
make[2]: *** [Makefile:1927: tui-winsource.o] Error 1
Unlike ncurses, <curses.h> declares
extern int mvwaddstr(WINDOW *, int, int, char *);
i.e. the last arg is char *, not const char *.
The patch fixes this by casting the last arg to mvwaddstr to char *,
as was recently done on mainline in a newterm() call (the only
difference between 8.0 and mainline gdb/tui).
* tui/tui-windata.c (tui_erase_data_content): Cast last mvwaddstr
arg to char *.
* tui/tui-wingeneral.c (box_win): Likewise.
* tui/tui-winsource.c (tui_erase_source_content): Likewise.
(tui_show_source_line): Likewise.
(tui_show_exec_info_content): Likewise.
Vladimir Mezentsev [Fri, 19 May 2017 10:06:19 +0000 (03:06 -0700)]
gdb: fix TYPE_CODE_ARRAY handling in sparc targets
gdb has a special type (TYPE_CODE_ARRAY) to support the gcc extension
(https://gcc.gnu.org/onlinedocs/gcc/Vector-Extensions.html).
TYPE_CODE_ARRAY is handled incorrectly for both (32- and 64-bit) modes
on Sparc machines.
Tested on sparc64-linux-gnu and sparc-solaris (32- and 64-bit mode).
6 tests ( from gdb/testsuite/gdb.base/gnu_vector.exp) failed on
sparc64-Linux and on sparc-Solaris in 32- and 64-bit mode. Now all
these tests passed. gdb/testsuite/gdb.base/gnu_vector.exp has 117
different cases for small (and not small) arrays and structures.
No regressions.
gdb/ChangeLog:
2017-05-19 Vladimir Mezentsev <vladimir.mezentsev@oracle.com>
* sparc-tdep.c (sparc_structure_return_p)
(sparc_arg_on_registers_p): New functions.
(sparc32_store_arguments): Use them.
* sparc64-tdep.c (sparc64_16_byte_align_p)
(sparc64_store_floating_fields, sparc64_extract_floating_fields):
Handle TYPE_CODE_ARRAY.
Alan Modra [Fri, 19 May 2017 03:10:10 +0000 (12:40 +0930)]
garbage collect debug sections when no alloc sections are kept
The pr20882 testcase fails on a number of targets that add attribute
or note sections to object files, and the default linker script says
those sections should be kept. This patch changes --gc-sections to
drop debug and special sections like .comment when no SEC_ALLOC
section in an object file is kept. The assumption is that debug
sections are describing code and data that will become part of the
final image in memory.
* elflink.c (_bfd_elf_gc_mark_extra_sections): Don't keep
debug and special sections when no non-note alloc sections in an
object are kept.
Eli Zaretskii [Fri, 19 May 2017 08:05:59 +0000 (11:05 +0300)]
Avoid MinGW compilation warning in readline/input.c
This change was already accepted upstream in Readline.
readline/ChangeLog.gdb:
2017-05-19 Eli Zaretskii <eliz@gnu.org>
* input.c [_WIN32]: Include <conio.h> to avoid compiler warning on
MinGW.
Maciej W. Rozycki [Fri, 19 May 2017 06:53:21 +0000 (07:53 +0100)]
MIPS/binutils/testsuite: Bail out right away if !ELF
We have but ELF binutils tests in the MIPS subset, and non-ELF MIPS/GAS
ports are gone, making a future addition of any non-ELF tests unlikely.
Bail out right away then if non-ELF, consuming one level of indentation
across the actual tests run.
binutils/
* testsuite/binutils-all/mips/mips.exp: Bail out right away if
non-ELF.
GDB Administrator [Fri, 19 May 2017 00:00:39 +0000 (00:00 +0000)]
Automatic date update in version.in
Tom Tromey [Thu, 18 May 2017 23:31:41 +0000 (17:31 -0600)]
Fix test failure with Rust 1.18 and 1.19
With Rust 1.18 and 1.19, I saw some test suite failures. They were
all of the same form -- Box seems to be qualified in the output now,
like:
print box_some
$64 = core::option::Option<alloc::boxed::Box<u8>>::Some(0x7ffff6c21018 "\001\000")
... where the test was expecting Option<Box<u8>>.
This patch fixes the problem in a way that should work with earlier
versions of Rust.
gdb/testsuite/ChangeLog
2017-05-18 Tom Tromey <tom@tromey.com>
* gdb.rust/simple.exp: Allow Box to be qualified.
Thomas Preud'homme [Thu, 18 May 2017 15:31:40 +0000 (16:31 +0100)]
Expect prompt after no FPU warning
2017-05-18 Thomas Preud'homme <thomas.preudhomme@arm.com>
gdb/testsuite/
* gdb.base/float.exp: Expect GDB prompt for targets without FPU.
Nick Clifton [Thu, 18 May 2017 14:07:59 +0000 (15:07 +0100)]
Treat a prefix of "$SYSROOT" in the same way as "=" when parsing linker search paths.
PR ld/21251
* ldfile.c (ldfile_add_library_path): If the path starts with
$SYSROOT then use the sysroot as the real prefix.
* ldlang.c (lang_add_input_file): Treat $SYSROOT in the same
way as =.
* ldlex.l: Add $SYSROOT as allow prefix for a filename.
* ld.texinfo (-L): Document that $SYSROOT acts like = when
prefixing a library search path.
(INPUT): Likewise.
* testsuite/ld-scripts/sysroot-prefix.exp: Add $SYSROOT prefix
tests.
Pedro Alves [Thu, 18 May 2017 10:40:08 +0000 (11:40 +0100)]
gdb.base/fileio.c: Fix several -Wmaybe-uninitialized warnings
src/gdb/testsuite/gdb.base/fileio.c: In function ‘test_write’:
src/gdb/testsuite/gdb.base/fileio.c:158:5: warning: ‘ret’ may be used uninitialized in this function [-Wmaybe-uninitialized]
printf ("write 1: ret = %d, errno = %d\n", ret, errno);
^
gdb/ChangeLog:
2017-05-18 Pedro Alves <palves@redhat.com>
* gdb.base/fileio.c (test_write, test_read, test_close)
(test_fstat): Don't print 'ret' in the fail path.
Pedro Alves [Thu, 18 May 2017 10:37:55 +0000 (11:37 +0100)]
gdb.base/fileio.c: Fix several -Wreturn-type warnings
All the "test_" functions warn like:
src/gdb/testsuite/gdb.base/fileio.c: In function ‘test_close’:
src/gdb/testsuite/gdb.base/fileio.c:280:1: warning: control reaches end of non-void function [-Wreturn-type]
}
^
Nothing looks at the return of these functions, so just make them
return void. While at it, "()" is not the same as "(void)" in C - fix
that too.
gdb/ChangeLog:
2017-05-18 Pedro Alves <palves@redhat.com>
* gdb.base/fileio.c (stop, test_open, test_write, test_read)
(test_lseek, test_close, test_stat, test_fstat, test_isatty)
(test_system, test_rename, test_unlink, test_time): Change
prototypes.
* gdb.base/fileio.exp (stop_msg): Adjust.
Pedro Alves [Thu, 18 May 2017 10:47:05 +0000 (11:47 +0100)]
gdb.base/fileio.exp: Remove nowarnings
... and quiet -Wnonnull in a different way.
gdb/testsuite/ChangeLog:
2017-05-18 Pedro Alves <palves@redhat.com>
* gdb.base/fileio.c (null_str): New global.
(test_stat): Use it.
* gdb.base/fileio.exp: Remove nowarnings.
Alan Modra [Thu, 18 May 2017 07:21:48 +0000 (16:51 +0930)]
fix changelog typo
Alan Modra [Thu, 18 May 2017 05:17:40 +0000 (14:47 +0930)]
Don't compare boolean values against TRUE or FALSE
bfd/
* arc-got.h: Don't compare boolean values against TRUE or FALSE.
* elf-m10300.c: Likewise.
* elf.c: Likewise.
* elf32-arc.c: Likewise.
* elf32-bfin.c: Likewise.
* elf32-m68k.c: Likewise.
* elf32-nds32.c: Likewise.
* elf32-tilepro.c: Likewise.
* elflink.c: Likewise.
* elfnn-aarch64.c: Likewise.
* elfnn-riscv.c: Likewise.
* elfxx-tilegx.c: Likewise.
* mach-o.c: Likewise.
* peXXigen.c: Likewise.
* vms-alpha.c: Likewise.
* vms-lib.c: Likewise.
opcodes/
* aarch64-asm.c: Don't compare boolean values against TRUE or FALSE.
* aarch64-dis.c: Likewise.
* aarch64-gen.c: Likewise.
* aarch64-opc.c: Likewise.
binutils/
* strings.c: Don't compare boolean values against TRUE or FALSE.
gas/
* config/tc-aarch64.c: Don't compare booleans against TRUE or FALSE.
* config/tc-hppa.c: Likewise.
* config/tc-mips.c: Likewise.
* config/tc-score7.c: Likewise.
ld/
* emultempl/elf32.em: Don't compare boolean values against TRUE or FALSE.
* emultempl/pe.em: Likewise.
* emultempl/pep.em: Likewise.
* emultempl/xtensaelf.em: Likewise.