atl1c: reserve min skb headroom

[ Upstream commit 6e56830776828d8ca9897fc4429eeab47c3bb432 ]

Got crash report with following backtrace:
BUG: unable to handle kernel paging request at ffff8801869daffe
RIP: 0010:[<ffffffff816429c4>]  [<ffffffff816429c4>] ip6_finish_output2+0x394/0x4c0
RSP: 0018:ffff880186c83a98  EFLAGS: 00010283
RAX: ffff8801869db00e ...
  [<ffffffff81644cdc>] ip6_finish_output+0x8c/0xf0
  [<ffffffff81644d97>] ip6_output+0x57/0x100
  [<ffffffff81643dc9>] ip6_forward+0x4b9/0x840
  [<ffffffff81645566>] ip6_rcv_finish+0x66/0xc0
  [<ffffffff81645db9>] ipv6_rcv+0x319/0x530
  [<ffffffff815892ac>] netif_receive_skb+0x1c/0x70
  [<ffffffffc0060bec>] atl1c_clean+0x1ec/0x310 [atl1c]
  ...

The bad access is in neigh_hh_output(), at skb->data - 16 (HH_DATA_MOD).
atl1c driver provided skb with no headroom, so 14 bytes (ethernet
header) got pulled, but then 16 are copied.

Reserve NET_SKB_PAD bytes headroom, like netdev_alloc_skb().

Compile tested only; I lack hardware.

Fixes: 7b7017642199 ("atl1c: Fix misuse of netdev_alloc_skb in refilling rx ring")
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

qed: Correct Multicast API to reflect existence of 256 approximate buckets.

[ Upstream commit 25c020a90919632b3425c19dc09188d56b9ed59a ]

FW hsi contains 256 approximation buckets which are split in ramrod into
eight u32 values, but driver is using eight 'unsigned long' variables.

This patch fixes the mcast logic by making the API utilize u32.

Fixes: 83aeb933 ("qed*: Trivial modifications")
Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com>
Signed-off-by: Ariel Elior <ariel.elior@cavium.com>
Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

qed: Fix possible race for the link state value.

[ Upstream commit 58874c7b246109d8efb2b0099d1aa296d6bfc3fa ]

There's a possible race where driver can read link status in mid-transition
and see that virtual-link is up yet speed is 0. Since in this
mid-transition we're guaranteed to see a mailbox from MFW soon, we can
afford to treat this as link down.

Fixes: cc875c2e ("qed: Add link support")
Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com>
Signed-off-by: Ariel Elior <ariel.elior@cavium.com>
Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

qed: Fix link flap issue due to mismatching EEE capabilities.

[ Upstream commit 4ad95a93a702ec4f4fb5159b822797ba67b8cbbe ]

Apparently, MFW publishes EEE capabilities even for Fiber-boards that don't
support them, and later since qed internally sets adv_caps it would cause
link-flap avoidance (LFA) to fail when driver would initiate the link.
This in turn delays the link, causing traffic to fail.

Driver has been modified to not to ask MFW for any EEE config if EEE isn't
to be enabled.

Fixes: 645874e5 ("qed: Add support for Energy efficient ethernet.")
Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com>
Signed-off-by: Ariel Elior <ariel.elior@cavium.com>
Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: caif: Add a missing rcu_read_unlock() in caif_flow_cb

[ Upstream commit 64119e05f7b31e83e2555f6782e6cdc8f81c63f4 ]

Add a missing rcu_read_unlock in the error path

Fixes: c95567c80352 ("caif: added check for potential null return")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tools/power turbostat: fix -S on UP systems

[ Upstream commit 9d83601a9cc1884d1b5706ee2acc661d558c6838 ]

The -S (system summary) option failed to print any data on a 1-processor system.

Reported-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: vmx: use local variable for current_vmptr when emulating VMPTRST

[ Upstream commit 0a06d4256674c4e041945b52044941995fee237d ]

Do not expose the address of vmx->nested.current_vmptr to
kvm_write_guest_virt_system() as the resulting __copy_to_user()
call will trigger a WARN when CONFIG_HARDENED_USERCOPY is
enabled.

Opportunistically clean up variable names in handle_vmptrst()
to improve readability, e.g. vmcs_gva is misleading as the
memory operand of VMPTRST is plain memory, not a VMCS.

Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Tested-by: Peter Shier <pshier@google.com>
Reviewed-by: Peter Shier <pshier@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: nf_tables: don't allow to rename to already-pending name

[ Upstream commit c6cc94df65c3174be92afbee638f11cbb5e606a7 ]

Its possible to rename two chains to the same name in one
transaction:

nft add chain t c1
nft add chain t c2
nft 'rename chain t c1 c3;rename chain t c2 c3'

This creates two chains named 'c3'.

Appears to be harmless, both chains can still be deleted both
by name or handle, but, nevertheless, its a bug.

Walk transaction log and also compare vs. the pending renames.

Both chains can still be deleted, but nevertheless it is a bug as
we don't allow to create chains with identical names, so we should
prevent this from happening-by-rename too.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: nf_tables: fix memory leaks on chain rename

[ Upstream commit 9f8aac0be21ed5f99bd5ba0ff315d710737d1794 ]

The new name is stored in the transaction metadata, on commit,
the pointers to the old and new names are swapped.

Therefore in abort and commit case we have to free the
pointer in the chain_trans container.

In commit case, the pointer can be used by another cpu that
is currently dumping the renamed chain, thus kfree needs to
happen after waiting for rcu readers to complete.

Fixes: b7263e071a ("netfilter: nf_tables: Allow chain name of up to 255 chars")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bpf, ppc64: fix unexpected r0=0 exit path inside bpf_xadd

[ Upstream commit b9c1e60e7bf4e64ac1b4f4d6d593f0bb57886973 ]

None of the JITs is allowed to implement exit paths from the BPF
insn mappings other than BPF_JMP | BPF_EXIT. In the BPF core code
we have a couple of rewrites in eBPF (e.g. LD_ABS / LD_IND) and
in eBPF to cBPF translation to retain old existing behavior where
exceptions may occur; they are also tightly controlled by the
verifier where it disallows some of the features such as BPF to
BPF calls when legacy LD_ABS / LD_IND ops are present in the BPF
program. During recent review of all BPF_XADD JIT implementations
I noticed that the ppc64 one is buggy in that it contains two
jumps to exit paths. This is problematic as this can bypass verifier
expectations e.g. pointed out in commit f6b1b3bf0d5f ("bpf: fix
subprog verifier bypass by div/mod by 0 exception"). The first
exit path is obsoleted by the fix in ca36960211eb ("bpf: allow xadd
only on aligned memory") anyway, and for the second one we need to
do a fetch, add and store loop if the reservation from lwarx/ldarx
was lost in the meantime.

Fixes: 156d0e290e96 ("powerpc/ebpf/jit: Implement JIT compiler for extended BPF")
Reviewed-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Reviewed-by: Sandipan Das <sandipan@linux.vnet.ibm.com>
Tested-by: Sandipan Das <sandipan@linux.vnet.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: nft_set_hash: add rcu_barrier() in the nft_rhash_destroy()

[ Upstream commit 9970a8e40d4c39e23d62d32540366d1d7d2cce9b ]

GC of set uses call_rcu() to destroy elements.
So that elements would be destroyed after destroying sets and chains.
But, elements should be destroyed before destroying sets and chains.
In order to wait calling call_rcu(), a rcu_barrier() is added.

In order to test correctly, below patch should be applied.
https://patchwork.ozlabs.org/patch/940883/

test scripts:
   %cat test.nft
   table ip aa {
   map map1 {
   type ipv4_addr : verdict; flags timeout;
   elements = {
   0 : jump a0,
   1 : jump a0,
   2 : jump a0,
   3 : jump a0,
   4 : jump a0,
   5 : jump a0,
   6 : jump a0,
   7 : jump a0,
   8 : jump a0,
   9 : jump a0,
   }
   timeout 1s;
   }
   chain a0 {
   }
   }
   flush ruleset

   [ ... ]

   table ip aa {
   map map1 {
   type ipv4_addr : verdict; flags timeout;
   elements = {
   0 : jump a0,
   1 : jump a0,
   2 : jump a0,
   3 : jump a0,
   4 : jump a0,
   5 : jump a0,
   6 : jump a0,
   7 : jump a0,
   8 : jump a0,
   9 : jump a0,
   }
   timeout 1s;
   }
   chain a0 {
   }
   }
   flush ruleset

Splat looks like:
[  200.795603] kernel BUG at net/netfilter/nf_tables_api.c:1363!
[  200.806944] invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI
[  200.812253] CPU: 1 PID: 1582 Comm: nft Not tainted 4.17.0+ #24
[  200.820297] Hardware name: To be filled by O.E.M. To be filled by O.E.M./Aptio CRB, BIOS 5.6.5 07/08/2015
[  200.830309] RIP: 0010:nf_tables_chain_destroy.isra.34+0x62/0x240 [nf_tables]
[  200.838317] Code: 43 50 85 c0 74 26 48 8b 45 00 48 8b 4d 08 ba 54 05 00 00 48 c7 c6 60 6d 29 c0 48 c7 c7 c0 65 29 c0
4c 8b 40 08 e8 58 e5 fd f8 <0f> 0b 48 89 da 48 b8 00 00 00 00 00 fc ff
[  200.860366] RSP: 0000:ffff880118dbf4d0 EFLAGS: 00010282
[  200.866354] RAX: 0000000000000061 RBX: ffff88010cdeaf08 RCX: 0000000000000000
[  200.874355] RDX: 0000000000000061 RSI: 0000000000000008 RDI: ffffed00231b7e90
[  200.882361] RBP: ffff880118dbf4e8 R08: ffffed002373bcfb R09: ffffed002373bcfa
[  200.890354] R10: 0000000000000000 R11: ffffed002373bcfb R12: dead000000000200
[  200.898356] R13: dead000000000100 R14: ffffffffbb62af38 R15: dffffc0000000000
[  200.906354] FS:  00007fefc31fd700(0000) GS:ffff88011b800000(0000) knlGS:0000000000000000
[  200.915533] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  200.922355] CR2: 0000557f1c8e9128 CR3: 0000000106880000 CR4: 00000000001006e0
[  200.930353] Call Trace:
[  200.932351]  ? nf_tables_commit+0x26f6/0x2c60 [nf_tables]
[  200.939525]  ? nf_tables_setelem_notify.constprop.49+0x1a0/0x1a0 [nf_tables]
[  200.947525]  ? nf_tables_delchain+0x6e0/0x6e0 [nf_tables]
[  200.952383]  ? nft_add_set_elem+0x1700/0x1700 [nf_tables]
[  200.959532]  ? nla_parse+0xab/0x230
[  200.963529]  ? nfnetlink_rcv_batch+0xd06/0x10d0 [nfnetlink]
[  200.968384]  ? nfnetlink_net_init+0x130/0x130 [nfnetlink]
[  200.975525]  ? debug_show_all_locks+0x290/0x290
[  200.980363]  ? debug_show_all_locks+0x290/0x290
[  200.986356]  ? sched_clock_cpu+0x132/0x170
[  200.990352]  ? find_held_lock+0x39/0x1b0
[  200.994355]  ? sched_clock_local+0x10d/0x130
[  200.999531]  ? memset+0x1f/0x40

Fixes: 9d0982927e79 ("netfilter: nft_hash: add support for timeouts")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: gadget: f_uac2: fix endianness of 'struct cntrl_*_lay3'

[ Upstream commit eec24f2a0d4dc3b1d95a3ccd2feb523ede3ba775 ]

The list [1] of commits doing endianness fixes in USB subsystem is long
due to below quote from USB spec Revision 2.0 from April 27, 2000:

------------
8.1 Byte/Bit Ordering

Multiple byte fields in standard descriptors, requests, and responses
are interpreted as and moved over the bus in little-endian order, i.e.
LSB to MSB.
------------

This commit belongs to the same family.

[1] Example of endianness fixes in USB subsystem:
commit 14e1d56cbea6 ("usb: gadget: f_uac2: endianness fixes.")
commit 42370b821168 ("usb: gadget: f_uac1: endianness fixes.")
commit 63afd5cc7877 ("USB: chaoskey: fix Alea quirk on big-endian hosts")
commit 74098c4ac782 ("usb: gadget: acm: fix endianness in notifications")
commit cdd7928df0d2 ("ACM gadget: fix endianness in notifications")
commit 323ece54e076 ("cdc-wdm: fix endianness bug in debug statements")
commit e102609f1072 ("usb: gadget: uvc: Fix endianness mismatches")
       list goes on

Fixes: 132fcb460839 ("usb: gadget: Add Audio Class 2.0 Driver")
Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Reviewed-by: Ruslan Bilovol <ruslan.bilovol@gmail.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tools: usb: ffs-test: Fix build on big endian systems

[ Upstream commit a2b22dddc7bb6110ac3b5ed1a60aa9279836fadb ]

The tools/usb/ffs-test.c file defines cpu_to_le16/32 by using the C
library htole16/32 function calls. However, cpu_to_le16/32 are used when
initializing structures, i.e in a context where a function call is not
allowed.

It works fine on little endian systems because htole16/32 are defined by
the C library as no-ops. But on big-endian systems, they are actually
doing something, which might involve calling a function, causing build
failures, such as:

   ffs-test.c:48:25: error: initializer element is not constant
    #define cpu_to_le32(x)  htole32(x)
                            ^~~~~~~
   ffs-test.c:128:12: note: in expansion of macro ‘cpu_to_le32’
      .magic = cpu_to_le32(FUNCTIONFS_DESCRIPTORS_MAGIC_V2),
               ^~~~~~~~~~~

To solve this, we code cpu_to_le16/32 in a way that allows them to be
used when initializing structures. This fix was imported from
meta-openembedded/android-tools/fix-big-endian-build.patch written by
Thomas Petazzoni <thomas.petazzoni@free-electrons.com>.

CC: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb/phy: fix PPC64 build errors in phy-fsl-usb.c

[ Upstream commit a39ba90a1cc7010edb0a7132e1b67f3d80b994e9 ]

Fix build errors when built for PPC64:
These variables are only used on PPC32 so they don't need to be
initialized for PPC64.

../drivers/usb/phy/phy-fsl-usb.c: In function 'usb_otg_start':
../drivers/usb/phy/phy-fsl-usb.c:865:3: error: '_fsl_readl' undeclared (first use in this function); did you mean 'fsl_readl'?
   _fsl_readl = _fsl_readl_be;
../drivers/usb/phy/phy-fsl-usb.c:865:16: error: '_fsl_readl_be' undeclared (first use in this function); did you mean 'fsl_readl'?
   _fsl_readl = _fsl_readl_be;
../drivers/usb/phy/phy-fsl-usb.c:866:3: error: '_fsl_writel' undeclared (first use in this function); did you mean 'fsl_writel'?
   _fsl_writel = _fsl_writel_be;
../drivers/usb/phy/phy-fsl-usb.c:866:17: error: '_fsl_writel_be' undeclared (first use in this function); did you mean 'fsl_writel'?
   _fsl_writel = _fsl_writel_be;
../drivers/usb/phy/phy-fsl-usb.c:868:16: error: '_fsl_readl_le' undeclared (first use in this function); did you mean 'fsl_readl'?
   _fsl_readl = _fsl_readl_le;
../drivers/usb/phy/phy-fsl-usb.c:869:17: error: '_fsl_writel_le' undeclared (first use in this function); did you mean 'fsl_writel'?
   _fsl_writel = _fsl_writel_le;

and the sysfs "show" function return type should be ssize_t, not int:

../drivers/usb/phy/phy-fsl-usb.c:1042:49: error: initialization of 'ssize_t (*)(struct device *, struct device_attribute *, char *)' {aka 'long int (*)(struct device *, struct device_attribute *, char *)'} from incompatible pointer type 'int (*)(struct device *, struct device_attribute *, char *)' [-Werror=incompatible-pointer-types]
 static DEVICE_ATTR(fsl_usb2_otg_state, S_IRUGO, show_fsl_usb2_otg_state, NULL);

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Felipe Balbi <balbi@kernel.org>
Cc: linux-usb@vger.kernel.org
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: gadget: u_audio: protect stream runtime fields with stream spinlock

[ Upstream commit 56bc61587daadef67712068f251c4ef2e3932d94 ]

The change protects almost the whole body of u_audio_iso_complete()
function by PCM stream lock, this is mainly sufficient to avoid a race
between USB request completion and stream termination, the change
prevents a possibility of invalid memory access in interrupt context
by memcpy():

    Unable to handle kernel paging request at virtual address 00004e80
    pgd = c0004000
    [00004e80] *pgd=00000000
    Internal error: Oops: 817 [#1] PREEMPT SMP ARM
    CPU: 0 PID: 3 Comm: ksoftirqd/0 Tainted: G         C   3.14.54+ #117
    task: da180b80 ti: da192000 task.ti: da192000
    PC is at memcpy+0x50/0x330
    LR is at 0xcdd92b0e
    pc : [<c029ef30>]    lr : [<cdd92b0e>]    psr: 20000193
    sp : da193ce4  ip : dd86ae26  fp : 0000b180
    r10: daf81680  r9 : 00000000  r8 : d58a01ea
    r7 : 2c0b43e4  r6 : acdfb08b  r5 : 01a271cf  r4 : 87389377
    r3 : 69469782  r2 : 00000020  r1 : daf82fe0  r0 : 00004e80
    Flags: nzCv  IRQs off  FIQs on  Mode SVC_32  ISA ARM  Segment kernel
    Control: 10c5387d  Table: 2b70804a  DAC: 00000015
    Process ksoftirqd/0 (pid: 3, stack limit = 0xda192238)

Also added a check for potential !runtime condition, commonly it is
done by PCM_RUNTIME_CHECK(substream) in the beginning, however this
does not completely prevent from oopses in u_audio_iso_complete(),
because the proper protection scheme must be implemented in PCM
library functions.

An example of *not fixed* oops due to substream->runtime->*
dereference by snd_pcm_running(substream) from
snd_pcm_period_elapsed(), where substream->runtime is gone while
waiting the substream lock:

    Unable to handle kernel paging request at virtual address 6b6b6b6b
    pgd = db7e4000
    [6b6b6b6b] *pgd=00000000
    CPU: 0 PID: 193 Comm: klogd Tainted: G         C   3.14.54+ #118
    task: db5ac500 ti: db60c000 task.ti: db60c000
    PC is at snd_pcm_period_elapsed+0x48/0xd8 [snd_pcm]
    LR is at snd_pcm_period_elapsed+0x40/0xd8 [snd_pcm]
    pc : [<>]    lr : [<>]    psr: 60000193
    Flags: nZCv  IRQs off  FIQs on  Mode SVC_32  ISA ARM  Segment user
    Control: 10c5387d  Table: 2b7e404a  DAC: 00000015
    Process klogd (pid: 193, stack limit = 0xdb60c238)
    [<>] (snd_pcm_period_elapsed [snd_pcm]) from [<>] (udc_irq+0x500/0xbbc)
    [<>] (udc_irq) from [<>] (ci_irq+0x280/0x304)
    [<>] (ci_irq) from [<>] (handle_irq_event_percpu+0xa4/0x40c)
    [<>] (handle_irq_event_percpu) from [<>] (handle_irq_event+0x3c/0x5c)
    [<>] (handle_irq_event) from [<>] (handle_fasteoi_irq+0xc4/0x110)
    [<>] (handle_fasteoi_irq) from [<>] (generic_handle_irq+0x20/0x30)
    [<>] (generic_handle_irq) from [<>] (handle_IRQ+0x80/0xc0)
    [<>] (handle_IRQ) from [<>] (gic_handle_irq+0x3c/0x60)
    [<>] (gic_handle_irq) from [<>] (__irq_svc+0x44/0x78)

Signed-off-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com>
[erosca: W/o this patch, with minimal instrumentation [1], I can
         consistently reproduce BUG: KASAN: use-after-free [2]]

[1] Instrumentation to reproduce issue [2]:
#  diff --git a/drivers/usb/gadget/function/u_audio.c b/drivers/usb/gadget/function/u_audio.c
#  index a72295c953bb..bd0b308024fe 100644
#  --- a/drivers/usb/gadget/function/u_audio.c
#  +++ b/drivers/usb/gadget/function/u_audio.c
#  @@ -16,6 +16,7 @@
#   #include <sound/core.h>
#   #include <sound/pcm.h>
#   #include <sound/pcm_params.h>
#  +#include <linux/delay.h>
#
#   #include "u_audio.h"
#
#  @@ -147,6 +148,8 @@ static void u_audio_iso_complete(struct usb_ep *ep, struct usb_request *req)
#
#  spin_unlock_irqrestore(&prm->lock, flags);
#
#  + udelay(500); //delay here to increase probability of parallel activities
#  +
#  /* Pack USB load in ALSA ring buffer */
#  pending = prm->dma_bytes - hw_ptr;

[2] After applying [1], below BUG occurs on Rcar-H3-Salvator-X board:
==================================================================
BUG: KASAN: use-after-free in u_audio_iso_complete+0x24c/0x520 [u_audio]
Read of size 8 at addr ffff8006cafcc248 by task swapper/0/0

CPU: 0 PID: 0 Comm: swapper/0 Tainted: G        WC      4.14.47+ #160
Hardware name: Renesas Salvator-X board based on r8a7795 ES2.0+ (DT)
Call trace:
[<ffff2000080925ac>] dump_backtrace+0x0/0x364
[<ffff200008092924>] show_stack+0x14/0x1c
[<ffff200008f8dbcc>] dump_stack+0x108/0x174
[<ffff2000083c71b8>] print_address_description+0x7c/0x32c
[<ffff2000083c78e8>] kasan_report+0x324/0x354
[<ffff2000083c6114>] __asan_load8+0x24/0x94
[<ffff2000021d1b34>] u_audio_iso_complete+0x24c/0x520 [u_audio]
[<ffff20000152fe50>] usb_gadget_giveback_request+0x480/0x4d0 [udc_core]
[<ffff200001860ab8>] usbhsg_queue_done+0x100/0x130 [renesas_usbhs]
[<ffff20000185f814>] usbhsf_pkt_handler+0x1a4/0x298 [renesas_usbhs]
[<ffff20000185fb38>] usbhsf_irq_ready+0x128/0x178 [renesas_usbhs]
[<ffff200001859cc8>] usbhs_interrupt+0x440/0x490 [renesas_usbhs]
[<ffff2000081a0288>] __handle_irq_event_percpu+0x594/0xa58
[<ffff2000081a07d0>] handle_irq_event_percpu+0x84/0x12c
[<ffff2000081a0928>] handle_irq_event+0xb0/0x10c
[<ffff2000081a8384>] handle_fasteoi_irq+0x1e0/0x2ec
[<ffff20000819e5f8>] generic_handle_irq+0x2c/0x44
[<ffff20000819f0d0>] __handle_domain_irq+0x190/0x194
[<ffff20000808177c>] gic_handle_irq+0x80/0xac
Exception stack(0xffff200009e97c80 to 0xffff200009e97dc0)
7c80: 0000000000000000 0000000000000000 0000000000000003 ffff200008179298
7ca0: ffff20000ae1c180 dfff200000000000 0000000000000000 ffff2000081f9a88
7cc0: ffff200009eb5960 ffff200009e97cf0 0000000000001600 ffff0400041b064b
7ce0: 0000000000000000 0000000000000002 0000000200000001 0000000000000001
7d00: ffff20000842197c 0000ffff958c4970 0000000000000000 ffff8006da0d5b80
7d20: ffff8006d4678498 0000000000000000 000000126bde0a8b ffff8006d4678480
7d40: 0000000000000000 000000126bdbea64 ffff200008fd0000 ffff8006fffff980
7d60: 00000000495f0018 ffff200009e97dc0 ffff200008b6c4ec ffff200009e97dc0
7d80: ffff200008b6c4f0 0000000020000145 ffff8006da0d5b80 ffff8006d4678498
7da0: ffffffffffffffff ffff8006d4678498 ffff200009e97dc0 ffff200008b6c4f0
[<ffff200008084034>] el1_irq+0xb4/0x12c
[<ffff200008b6c4f0>] cpuidle_enter_state+0x818/0x844
[<ffff200008b6c59c>] cpuidle_enter+0x18/0x20
[<ffff20000815f2e4>] call_cpuidle+0x98/0x9c
[<ffff20000815f674>] do_idle+0x214/0x264
[<ffff20000815facc>] cpu_startup_entry+0x20/0x24
[<ffff200008fb09d8>] rest_init+0x30c/0x320
[<ffff2000095f1338>] start_kernel+0x570/0x5b0
---<-snip->---

Fixes: 132fcb460839 ("usb: gadget: Add Audio Class 2.0 Driver")
Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: gadget: u_audio: remove cached period bytes value

[ Upstream commit 773e53d50e227b0c03d0bb434c1636f6c49c75b2 ]

Substream period size potentially can be changed in runtime, however
this is not accounted in the data copying routine, the change replaces
the cached value with an actual value from substream runtime.

As a side effect the change also removes a potential division by zero
in u_audio_iso_complete() function, if there is a race with
uac_pcm_hw_free(), which sets prm->period_size to 0.

Fixes: 132fcb460839 ("usb: gadget: Add Audio Class 2.0 Driver")
Signed-off-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com>
Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: gadget: u_audio: remove caching of stream buffer parameters

[ Upstream commit 96afb54ece0ee903d23a7ac04ddc461413b972c4 ]

There is no necessity to copy PCM stream ring buffer area and size
properties to UAC private data structure, these values can be got
from substream itself.

The change gives more control on substream and avoid stale caching.

Fixes: 132fcb460839 ("usb: gadget: Add Audio Class 2.0 Driver")
Signed-off-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com>
Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: gadget: u_audio: update hw_ptr in iso_complete after data copied

[ Upstream commit 6b37bd78d30c890e575a1bda22978d1d2a233362 ]

In u_audio_iso_complete, the runtime hw_ptr is updated before the
data is actually copied over to/from the buffer/dma area. When
ALSA uses this hw_ptr, the data may not actually be available to
be used. This causes trash/stale audio to play/record. This
patch updates the hw_ptr after the data has been copied to avoid
this.

Fixes: 132fcb460839 ("usb: gadget: Add Audio Class 2.0 Driver")
Signed-off-by: Joshua Frkuska <joshua_frkuska@mentor.com>
Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: gadget: u_audio: fix pcm/card naming in g_audio_setup()

[ Upstream commit dfa042fa310caa475667b8c38d852f14439e0b01 ]

Fix below smatch (v0.5.0-4443-g69e9094e11c1) warnings:
drivers/usb/gadget/function/u_audio.c:607 g_audio_setup() warn: strcpy() 'pcm_name' of unknown size might be too large for 'pcm->name'
drivers/usb/gadget/function/u_audio.c:614 g_audio_setup() warn: strcpy() 'card_name' of unknown size might be too large for 'card->driver'
drivers/usb/gadget/function/u_audio.c:615 g_audio_setup() warn: strcpy() 'card_name' of unknown size might be too large for 'card->shortname'

Below commits performed a similar 's/strcpy/strlcpy/' rework:
* v2.6.31 commit 8372d4980fbc ("ALSA: ctxfi - Fix PCM device naming")
* v4.14 commit 003d3e70dbeb ("ALSA: ad1848: fix format string overflow warning")
* v4.14 commit 6d8b04de87e1 ("ALSA: cs423x: fix format string overflow warning")

Fixes: eb9fecb9e69b ("usb: gadget: f_uac2: split out audio core")
Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: gadget: f_uac2: fix error handling in afunc_bind (again)

[ Upstream commit e87581fe0509020f77ebf0b7c4c1c338c6a4bcf6 ]

If usb_ep_autoconfig() fails (i.e. returns a null endpoint descriptor),
we expect afunc_bind() to fail (i.e. return a negative error code).

However, due to v4.10-rc1 commit f1d3861d63a5 ("usb: gadget: f_uac2: fix
error handling at afunc_bind"), afunc_bind() returns zero, telling the
caller that it succeeded. This then generates NULL pointer dereference
in below scenario on Rcar H3-ES20-Salvator-X target:

rcar-gen3:/home/root# modprobe g_audio
[  626.521155] g_audio gadget: afunc_bind:565 Error!
[  626.526319] g_audio gadget: Linux USB Audio Gadget, version: Feb 2, 2012
[  626.533405] g_audio gadget: g_audio ready
rcar-gen3:/home/root#
rcar-gen3:/home/root# modprobe -r g_audio
[  728.256707] ==================================================================
[  728.264293] BUG: KASAN: null-ptr-deref in u_audio_stop_capture+0x70/0x268 [u_audio]
[  728.272244] Read of size 8 at addr 00000000000000a0 by task modprobe/2545
[  728.279309]
[  728.280849] CPU: 0 PID: 2545 Comm: modprobe Tainted: G        WC      4.14.47+ #152
[  728.288778] Hardware name: Renesas Salvator-X board based on r8a7795 ES2.0+ (DT)
[  728.296454] Call trace:
[  728.299151] [<ffff2000080925ac>] dump_backtrace+0x0/0x364
[  728.304808] [<ffff200008092924>] show_stack+0x14/0x1c
[  728.310081] [<ffff200008f8d5cc>] dump_stack+0x108/0x174
[  728.315522] [<ffff2000083c77c8>] kasan_report+0x1fc/0x354
[  728.321134] [<ffff2000083c611c>] __asan_load8+0x24/0x94
[  728.326600] [<ffff2000021e1618>] u_audio_stop_capture+0x70/0x268 [u_audio]
[  728.333735] [<ffff2000021f8b7c>] afunc_disable+0x44/0x60 [usb_f_uac2]
[  728.340503] [<ffff20000218177c>] usb_remove_function+0x9c/0x210 [libcomposite]
[  728.348060] [<ffff200002183320>] remove_config.isra.2+0x1d8/0x218 [libcomposite]
[  728.355788] [<ffff200002186c54>] __composite_unbind+0x104/0x1f8 [libcomposite]
[  728.363339] [<ffff200002186d58>] composite_unbind+0x10/0x18 [libcomposite]
[  728.370536] [<ffff20000152f158>] usb_gadget_remove_driver+0xc0/0x170 [udc_core]
[  728.378172] [<ffff20000153154c>] usb_gadget_unregister_driver+0x1cc/0x258 [udc_core]
[  728.386274] [<ffff200002180de8>] usb_composite_unregister+0x10/0x18 [libcomposite]
[  728.394116] [<ffff2000021d035c>] audio_driver_exit+0x14/0x28 [g_audio]
[  728.400878] [<ffff200008213ed4>] SyS_delete_module+0x288/0x32c
[  728.406935] Exception stack(0xffff8006cf6c7ec0 to 0xffff8006cf6c8000)
[  728.413624] 7ec0: 0000000006136428 0000000000000800 0000000000000000 0000ffffd706efe8
[  728.421718] 7ee0: 0000ffffd706efe9 000000000000000a 1999999999999999 0000000000000000
[  728.429792] 7f00: 000000000000006a 000000000042c078 0000000000000000 0000000000000005
[  728.437870] 7f20: 0000000000000000 0000000000000000 0000000000000004 0000000000000000
[  728.445952] 7f40: 000000000042bfc8 0000ffffbc7c8f40 0000000000000000 00000000061363c0
[  728.454035] 7f60: 0000000006136428 0000000000000000 0000000000000000 0000000006136428
[  728.462114] 7f80: 000000000042c000 0000ffffd7071448 000000000042c000 0000000000000000
[  728.470190] 7fa0: 00000000061350c0 0000ffffd7070010 000000000041129c 0000ffffd7070010
[  728.478281] 7fc0: 0000ffffbc7c8f48 0000000060000000 0000000006136428 000000000000006a
[  728.486351] 7fe0: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
[  728.494434] [<ffff200008084780>] el0_svc_naked+0x34/0x38
[  728.499957] ==================================================================
[  728.507801] Unable to handle kernel NULL pointer dereference at virtual address 000000a0
[  728.517742] Mem abort info:
[  728.520993]   Exception class = DABT (current EL), IL = 32 bits
[  728.527375]   SET = 0, FnV = 0
[  728.530731]   EA = 0, S1PTW = 0
[  728.534361] Data abort info:
[  728.537650]   ISV = 0, ISS = 0x00000006
[  728.541863]   CM = 0, WnR = 0
[  728.545167] user pgtable: 4k pages, 48-bit VAs, pgd = ffff8006c6100000
[  728.552156] [00000000000000a0] *pgd=0000000716a8d003
[  728.557519] , *pud=00000007116fc003
[  728.561259] , *pmd=0000000000000000
[  728.564985] Internal error: Oops: 96000006 [#1] PREEMPT SMP
[  728.570815] Modules linked in:
[  728.574023]  usb_f_uac2
[  728.576560]  u_audio
[  728.578827]  g_audio(-)
[  728.581361]  libcomposite
[  728.584071]  configfs
[  728.586428]  aes_ce_blk
[  728.588960]  sata_rcar
[  728.591421]  crypto_simd
[  728.594039]  cryptd
[  728.596217]  libata
[  728.598396]  aes_ce_cipher
[  728.601188]  crc32_ce
[  728.603542]  ghash_ce
[  728.605896]  gf128mul
[  728.608250]  aes_arm64
[  728.610692]  scsi_mod
[  728.613046]  sha2_ce
[  728.615313]  xhci_plat_hcd
[  728.618106]  sha256_arm64
[  728.620811]  sha1_ce
[  728.623077]  renesas_usbhs
[  728.625869]  xhci_hcd
[  728.628243]  renesas_usb3
[  728.630948]  sha1_generic
[  728.633670]  ravb_streaming(C)
[  728.636814]  udc_core
[  728.639168]  cpufreq_dt
[  728.641697]  rcar_gen3_thermal
[  728.644840]  usb_dmac
[  728.647194]  pwm_rcar
[  728.649548]  thermal_sys
[  728.652165]  virt_dma
[  728.654519]  mch_core(C)
[  728.657137]  pwm_bl
[  728.659315]  snd_soc_rcar
[  728.662020]  snd_aloop
[  728.664462]  snd_soc_generic_card
[  728.667869]  snd_soc_ak4613
[  728.670749]  ipv6
[  728.672768]  autofs4
[  728.675052] CPU: 0 PID: 2545 Comm: modprobe Tainted: G    B   WC      4.14.47+ #152
[  728.682973] Hardware name: Renesas Salvator-X board based on r8a7795 ES2.0+ (DT)
[  728.690637] task: ffff8006ced38000 task.stack: ffff8006cf6c0000
[  728.696814] PC is at u_audio_stop_capture+0x70/0x268 [u_audio]
[  728.702896] LR is at u_audio_stop_capture+0x70/0x268 [u_audio]
[  728.708964] pc : [<ffff2000021e1618>] lr : [<ffff2000021e1618>] pstate: 60000145
[  728.716620] sp : ffff8006cf6c7a50
[  728.720154] x29: ffff8006cf6c7a50
[  728.723760] x28: ffff8006ced38000
[  728.727272] x27: ffff200008fd7000
[  728.730857] x26: ffff2000021d2340
[  728.734361] x25: 0000000000000000
[  728.737948] x24: ffff200009e94b08
[  728.741452] x23: 00000000000000a0
[  728.745052] x22: 00000000000000a8
[  728.748558] x21: 1ffff000d9ed8f7c
[  728.752142] x20: ffff8006d671a800
[  728.755646] x19: 0000000000000000
[  728.759231] x18: 0000000000000000
[  728.762736] x17: 0000ffffbc7c8f40
[  728.766320] x16: ffff200008213c4c
[  728.769823] x15: 0000000000000000
[  728.773408] x14: 0720072007200720
[  728.776912] x13: 0720072007200720
[  728.780497] x12: ffffffffffffffff
[  728.784001] x11: 0000000000000040
[  728.787598] x10: 0000000000001600
[  728.791103] x9 : ffff8006cf6c77a0
[  728.794689] x8 : ffff8006ced39660
[  728.798193] x7 : ffff20000811c738
[  728.801794] x6 : 0000000000000000
[  728.805299] x5 : dfff200000000000
[  728.808885] x4 : ffff8006ced38000
[  728.812390] x3 : ffff200008fb46e8
[  728.815976] x2 : 0000000000000007
[  728.819480] x1 : 3ba68643e7431500
[  728.823066] x0 : 0000000000000000
[  728.826574] Process modprobe (pid: 2545, stack limit = 0xffff8006cf6c0000)
[  728.833704] Call trace:
[  728.836292] Exception stack(0xffff8006cf6c7910 to 0xffff8006cf6c7a50)
[  728.842987] 7900:                                   0000000000000000 3ba68643e7431500
[  728.851084] 7920: 0000000000000007 ffff200008fb46e8 ffff8006ced38000 dfff200000000000
[  728.859173] 7940: 0000000000000000 ffff20000811c738 ffff8006ced39660 ffff8006cf6c77a0
[  728.867248] 7960: 0000000000001600 0000000000000040 ffffffffffffffff 0720072007200720
[  728.875323] 7980: 0720072007200720 0000000000000000 ffff200008213c4c 0000ffffbc7c8f40
[  728.883412] 79a0: 0000000000000000 0000000000000000 ffff8006d671a800 1ffff000d9ed8f7c
[  728.891485] 79c0: 00000000000000a8 00000000000000a0 ffff200009e94b08 0000000000000000
[  728.899561] 79e0: ffff2000021d2340 ffff200008fd7000 ffff8006ced38000 ffff8006cf6c7a50
[  728.907636] 7a00: ffff2000021e1618 ffff8006cf6c7a50 ffff2000021e1618 0000000060000145
[  728.915710] 7a20: 0000000000000008 0000000000000000 0000ffffffffffff 3ba68643e7431500
[  728.923780] 7a40: ffff8006cf6c7a50 ffff2000021e1618
[  728.928880] [<ffff2000021e1618>] u_audio_stop_capture+0x70/0x268 [u_audio]
[  728.936032] [<ffff2000021f8b7c>] afunc_disable+0x44/0x60 [usb_f_uac2]
[  728.942822] [<ffff20000218177c>] usb_remove_function+0x9c/0x210 [libcomposite]
[  728.950385] [<ffff200002183320>] remove_config.isra.2+0x1d8/0x218 [libcomposite]
[  728.958134] [<ffff200002186c54>] __composite_unbind+0x104/0x1f8 [libcomposite]
[  728.965689] [<ffff200002186d58>] composite_unbind+0x10/0x18 [libcomposite]
[  728.972882] [<ffff20000152f158>] usb_gadget_remove_driver+0xc0/0x170 [udc_core]
[  728.980522] [<ffff20000153154c>] usb_gadget_unregister_driver+0x1cc/0x258 [udc_core]
[  728.988638] [<ffff200002180de8>] usb_composite_unregister+0x10/0x18 [libcomposite]
[  728.996472] [<ffff2000021d035c>] audio_driver_exit+0x14/0x28 [g_audio]
[  729.003231] [<ffff200008213ed4>] SyS_delete_module+0x288/0x32c
[  729.009278] Exception stack(0xffff8006cf6c7ec0 to 0xffff8006cf6c8000)
[  729.015946] 7ec0: 0000000006136428 0000000000000800 0000000000000000 0000ffffd706efe8
[  729.024022] 7ee0: 0000ffffd706efe9 000000000000000a 1999999999999999 0000000000000000
[  729.032099] 7f00: 000000000000006a 000000000042c078 0000000000000000 0000000000000005
[  729.040172] 7f20: 0000000000000000 0000000000000000 0000000000000004 0000000000000000
[  729.048263] 7f40: 000000000042bfc8 0000ffffbc7c8f40 0000000000000000 00000000061363c0
[  729.056337] 7f60: 0000000006136428 0000000000000000 0000000000000000 0000000006136428
[  729.064411] 7f80: 000000000042c000 0000ffffd7071448 000000000042c000 0000000000000000
[  729.072484] 7fa0: 00000000061350c0 0000ffffd7070010 000000000041129c 0000ffffd7070010
[  729.080563] 7fc0: 0000ffffbc7c8f48 0000000060000000 0000000006136428 000000000000006a
[  729.088636] 7fe0: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
[  729.096733] [<ffff200008084780>] el0_svc_naked+0x34/0x38
[  729.102259] Code: 9597d1b3 aa1703e0 9102a276 958792b9 (f9405275)
[  729.108617] ---[ end trace 7560c5fa3d100243 ]---

After this patch is applied, the issue is fixed:
rcar-gen3:/home/root# modprobe g_audio
[   59.217127] g_audio gadget: afunc_bind:565 Error!
[   59.222329] g_audio ee020000.usb: failed to start g_audio: -19
modprobe: ERROR: could not insert 'g_audio': No such device
rcar-gen3:/home/root# modprobe -r g_audio
rcar-gen3:/home/root#

Fixes: f1d3861d63a5 ("usb: gadget: f_uac2: fix error handling at afunc_bind")
Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: gadget: r8a66597: Fix a possible sleep-in-atomic-context bugs in r8a66597_queue()

[ Upstream commit f36b507c14c4b6e634463a610294e9cb0065c8ea ]

The driver may sleep in an interrupt handler.
The function call path (from bottom to top) in Linux-4.16.7 is:

[FUNC] r8a66597_queue(GFP_KERNEL)
drivers/usb/gadget/udc/r8a66597-udc.c, 1193:
r8a66597_queue in get_status
drivers/usb/gadget/udc/r8a66597-udc.c, 1301:
get_status in setup_packet
drivers/usb/gadget/udc/r8a66597-udc.c, 1381:
setup_packet in irq_control_stage
drivers/usb/gadget/udc/r8a66597-udc.c, 1508:
irq_control_stage in r8a66597_irq (interrupt handler)

To fix this bug, GFP_KERNEL is replaced with GFP_ATOMIC.

This bug is found by my static analysis tool (DSAC-2) and checked by
my code review.

Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: gadget: r8a66597: Fix two possible sleep-in-atomic-context bugs in init_controller()

[ Upstream commit 0602088b10a7c0b4e044a810678ef93d7cc5bf48 ]

The driver may sleep with holding a spinlock.
The function call paths (from bottom to top) in Linux-4.16.7 are:

[FUNC] msleep
drivers/usb/gadget/udc/r8a66597-udc.c, 839:
msleep in init_controller
drivers/usb/gadget/udc/r8a66597-udc.c, 96:
init_controller in r8a66597_usb_disconnect
drivers/usb/gadget/udc/r8a66597-udc.c, 93:
spin_lock in r8a66597_usb_disconnect

[FUNC] msleep
drivers/usb/gadget/udc/r8a66597-udc.c, 835:
msleep in init_controller
drivers/usb/gadget/udc/r8a66597-udc.c, 96:
init_controller in r8a66597_usb_disconnect
drivers/usb/gadget/udc/r8a66597-udc.c, 93:
spin_lock in r8a66597_usb_disconnect

To fix these bugs, msleep() is replaced with mdelay().

This bug is found by my static analysis tool (DSAC-2) and checked by
my code review.

Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nbd: handle unexpected replies better

[ Upstream commit 8f3ea35929a0806ad1397db99a89ffee0140822a ]

If the server or network is misbehaving and we get an unexpected reply
we can sometimes miss the request not being started and wait on a
request and never get a response, or even double complete the same
request.  Fix this by replacing the send_complete completion with just a
per command lock.  Add a per command cookie as well so that we can know
if we're getting a double completion for a previous event.  Also check
to make sure we dont have REQUEUED set as that means we raced with the
timeout handler and need to just let the retry occur.

Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nbd: don't requeue the same request twice.

[ Upstream commit d7d94d48a272fd7583dc3c83acb8f5ed4ef456a4 ]

We can race with the snd timeout and the per-request timeout and end up
requeuing the same request twice.  We can't use the send_complete
completion to tell if everything is ok because we hold the tx_lock
during send, so the timeout stuff will block waiting to mark the socket
dead, and we could be marked complete and still requeue.  Instead add a
flag to the socket so we know whether we've been requeued yet.

Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/imx: imx-ldb: check if channel is enabled before printing warning

[ Upstream commit c80d673b91a6c81d765864e10f2b15110ee900ad ]

If the second LVDS channel has been disabled in the DT when using dual-channel
mode we should not print a warning.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/imx: imx-ldb: disable LDB on driver bind

[ Upstream commit b58262396fabd43dc869b576e3defdd23b32fe94 ]

The LVDS signal integrity is only guaranteed when the correct enable
sequence (first IPU DI, then LDB) is used. If the LDB display output was
active before the imx-drm driver is loaded (like when a bootsplash was
active) the DI will be disabled by the full IPU reset we do when loading
the driver. The LDB control registers are not part of the IPU range and
thus will remain unchanged.

This leads to the LDB still being active when the DI is getting enabled,
effectively reversing the required enable sequence. Fix this by also
disabling the LDB on driver bind.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: libiscsi: fix possible NULL pointer dereference in case of TMF

[ Upstream commit a17037e7d59075053b522048742a08ac9500bde8 ]

In iscsi_check_tmf_restrictions() task->hdr is dereferenced to print the
opcode, it is possible that task->hdr is NULL.

There are two cases based on opcode argument:

1. ISCSI_OP_SCSI_CMD - In this case alloc_pdu() is called
after iscsi_check_tmf_restrictions()

iscsi_prep_scsi_cmd_pdu() -> iscsi_check_tmf_restrictions() -> alloc_pdu().

Transport drivers allocate memory for iSCSI hdr in alloc_pdu() and assign
it to task->hdr. In case of TMF task->hdr will be NULL resulting in NULL
pointer dereference.

2. ISCSI_OP_SCSI_DATA_OUT - In this case transport driver can free the
memory for iSCSI hdr after transmitting the pdu so task->hdr can be NULL or
invalid.

This patch fixes this issue by removing task->hdr->opcode from the printk
statement.

Signed-off-by: Varun Prakash <varun@chelsio.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: target: iscsi: cxgbit: fix max iso npdu calculation

[ Upstream commit 1b350ea0c2f4df9aa30426614c8eb755a8c32814 ]

- rounddown CXGBIT_MAX_ISO_PAYLOAD by csk->emss before calculating
  max_iso_npdu to get max TCP payload in multiple of mss.

- call cxgbit_set_digest() before cxgbit_set_iso_npdu() to set
  csk->submode, it is used in calculating number of iso pdus.

Signed-off-by: Varun Prakash <varun@chelsio.com>
Reviewed-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/bridge: adv7511: Reset registers on hotplug

[ Upstream commit 5f3417569165a8ee57654217f73e0160312f409c ]

The bridge loses its hw state when the cable is unplugged. If we detect
this case in the hpd handler, reset its state.

Reported-by: Rob Clark <robdclark@gmail.com>
Tested-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180703165648.120401-1-seanpaul@chromium.org
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nl80211: Add a missing break in parse_station_flags

[ Upstream commit 5cf3006cc81d9aa09a10aa781fc065546b12919d ]

I was looking at usually suppressed gcc warnings,
[-Wimplicit-fallthrough=] in this case:

The code definitely looks like a break is missing here.
However I am not able to test the NL80211_IFTYPE_MESH_POINT,
nor do I actually know what might be :)
So please use this patch with caution and only if you are
able to do some testing.

Signed-off-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
[johannes: looks obvious enough to apply as is, interesting
 though that it never seems to have been a problem]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: clear mmp sequence number when remounting read-only

[ Upstream commit 2dca60d98e241bea686004168f85208f215fc697 ]

Previously, when an MMP-protected file system is remounted read-only,
the kmmpd thread would exit the next time it woke up (a few seconds
later), without resetting the MMP sequence number back to
EXT4_MMP_SEQ_CLEAN.

Fix this by explicitly killing the MMP thread when the file system is
remounted read-only.

Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mac80211: add stations tied to AP_VLANs during hw reconfig

[ Upstream commit 19103a4bfb42f320395daa5616ece3e89e759d63 ]

As part of hw reconfig, only stations linked to AP interfaces are added
back to the driver ignoring those which are tied to AP_VLAN interfaces.

It is true that there could be stations tied to the AP_VLAN interface while
serving 4addr clients or when using AP_VLAN for VLAN operations; we should
be adding these stations back to the driver as part of hw reconfig, failing
to do so can cause functional issues.

In the case of ath10k driver, the following errors were observed.

ath10k_pci : failed to install key for non-existent peer XX:XX:XX:XX:XX:XX
Workqueue: events_freezable ieee80211_restart_work [mac80211]
(unwind_backtrace) from (show_stack+0x10/0x14)
(show_stack) (dump_stack+0x80/0xa0)
(dump_stack) (warn_slowpath_common+0x68/0x8c)
(warn_slowpath_common) (warn_slowpath_null+0x18/0x20)
(warn_slowpath_null) (ieee80211_enable_keys+0x88/0x154 [mac80211])
(ieee80211_enable_keys) (ieee80211_reconfig+0xc90/0x19c8 [mac80211])
(ieee80211_reconfig]) (ieee80211_restart_work+0x8c/0xa0 [mac80211])
(ieee80211_restart_work) (process_one_work+0x284/0x488)
(process_one_work) (worker_thread+0x228/0x360)
(worker_thread) (kthread+0xd8/0xec)
(kthread) (ret_from_fork+0x14/0x24)

Also while bringing down the AP VAP, WARN_ONs and errors related to peer
removal were observed.

ath10k_pci : failed to clear all peer wep keys for vdev 0: -2
ath10k_pci : failed to disassociate station: 8c:fd:f0:0a:8c:f5 vdev 0: -2
(unwind_backtrace) (show_stack+0x10/0x14)
(show_stack) (dump_stack+0x80/0xa0)
(dump_stack) (warn_slowpath_common+0x68/0x8c)
(warn_slowpath_common) (warn_slowpath_null+0x18/0x20)
(warn_slowpath_null) (sta_set_sinfo+0xb98/0xc9c [mac80211])
(sta_set_sinfo [mac80211]) (__sta_info_flush+0xf0/0x134 [mac80211])
(__sta_info_flush [mac80211]) (ieee80211_stop_ap+0xe8/0x390 [mac80211])
(ieee80211_stop_ap [mac80211]) (__cfg80211_stop_ap+0xe0/0x3dc [cfg80211])
(__cfg80211_stop_ap [cfg80211]) (cfg80211_stop_ap+0x30/0x44 [cfg80211])
(cfg80211_stop_ap [cfg80211]) (genl_rcv_msg+0x274/0x30c)
(genl_rcv_msg) (netlink_rcv_skb+0x58/0xac)
(netlink_rcv_skb) (genl_rcv+0x20/0x34)
(genl_rcv) (netlink_unicast+0x11c/0x204)
(netlink_unicast) (netlink_sendmsg+0x30c/0x370)
(netlink_sendmsg) (sock_sendmsg+0x70/0x84)
(sock_sendmsg) (___sys_sendmsg.part.3+0x188/0x228)
(___sys_sendmsg.part.3) (__sys_sendmsg+0x4c/0x70)
(__sys_sendmsg) (ret_fast_syscall+0x0/0x44)

These issues got fixed by adding the stations which are
tied to AP_VLANs back to the driver.

Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

esp6: fix memleak on error path in esp6_input

[ Upstream commit 7284fdf39a912322ce97de2d30def3c6068a418c ]

This ought to be an omission in e6194923237 ("esp: Fix memleaks on error
paths."). The memleak on error path in esp6_input is similar to esp_input
of esp4.

Fixes: e6194923237 ("esp: Fix memleaks on error paths.")
Fixes: 3f29770723f ("ipsec: check return value of skb_to_sgvec always")
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xfrm: free skb if nlsk pointer is NULL

[ Upstream commit 86126b77dcd551ce223e7293bb55854e3df05646 ]

nlmsg_multicast() always frees the skb, so in case we cannot call
it we must do that ourselves.

Fixes: 21ee543edc0dea ("xfrm: fix race between netns cleanup and state expire notification")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xfrm: fix missing dst_release() after policy blocking lbcast and multicast

[ Upstream commit 8cc88773855f988d6a3bbf102bbd9dd9c828eb81 ]

Fix missing dst_release() when local broadcast or multicast traffic is
xfrm policy blocked.

For IPv4 this results to dst leak: ip_route_output_flow() allocates
dst_entry via __ip_route_output_key() and passes it to
xfrm_lookup_route(). xfrm_lookup returns ERR_PTR(-EPERM) that is
propagated. The dst that was allocated is never released.

IPv4 local broadcast testcase:
 ping -b 192.168.1.255 &
 sleep 1
 ip xfrm policy add src 0.0.0.0/0 dst 192.168.1.255/32 dir out action block

IPv4 multicast testcase:
 ping 224.0.0.1 &
 sleep 1
 ip xfrm policy add src 0.0.0.0/0 dst 224.0.0.1/32 dir out action block

For IPv6 the missing dst_release() causes trouble e.g. when used in netns:
 ip netns add TEST
 ip netns exec TEST ip link set lo up
 ip link add dummy0 type dummy
 ip link set dev dummy0 netns TEST
 ip netns exec TEST ip addr add fd00::1111 dev dummy0
 ip netns exec TEST ip link set dummy0 up
 ip netns exec TEST ping -6 -c 5 ff02::1%dummy0 &
 sleep 1
 ip netns exec TEST ip xfrm policy add src ::/0 dst ff02::1 dir out action block
 wait
 ip netns del TEST

After netns deletion we see:
[  258.239097] unregister_netdevice: waiting for lo to become free. Usage count = 2
[  268.279061] unregister_netdevice: waiting for lo to become free. Usage count = 2
[  278.367018] unregister_netdevice: waiting for lo to become free. Usage count = 2
[  288.375259] unregister_netdevice: waiting for lo to become free. Usage count = 2

Fixes: ac37e2515c1a ("xfrm: release dst_orig in case of error in xfrm_lookup()")
Signed-off-by: Tommi Rantala <tommi.t.rantala@nokia.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

vti6: fix PMTU caching and reporting on xmit

[ Upstream commit d6990976af7c5d8f55903bfb4289b6fb030bf754 ]

When setting the skb->dst before doing the MTU check, the route PMTU
caching and reporting is done on the new dst which is about to be
released.

Instead, PMTU handling should be done using the original dst.

This is aligned with IPv4 VTI.

Fixes: ccd740cbc6 ("vti6: Add pmtu handling to vti6_xmit.")
Signed-off-by: Eyal Birger <eyal.birger@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: vmx - Use skcipher for ctr fallback

commit e666d4e9ceec94c0a88c94b7db31d56474da43b3 upstream.

Signed-off-by: Paulo Flabiano Smorigo <pfsmorigo@linux.vnet.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 4.14.67

reiserfs: fix broken xattr handling (heap corruption, bad retval)

commit a13f085d111e90469faf2d9965eb39b11c114d7e upstream.

This fixes the following issues:

- When a buffer size is supplied to reiserfs_listxattr() such that each
  individual name fits, but the concatenation of all names doesn't fit,
  reiserfs_listxattr() overflows the supplied buffer.  This leads to a
  kernel heap overflow (verified using KASAN) followed by an out-of-bounds
  usercopy and is therefore a security bug.

- When a buffer size is supplied to reiserfs_listxattr() such that a
  name doesn't fit, -ERANGE should be returned.  But reiserfs instead just
  truncates the list of names; I have verified that if the only xattr on a
  file has a longer name than the supplied buffer length, listxattr()
  incorrectly returns zero.

With my patch applied, -ERANGE is returned in both cases and the memory
corruption doesn't happen anymore.

Credit for making me clean this code up a bit goes to Al Viro, who pointed
out that the ->actor calling convention is suboptimal and should be
changed.

Link: http://lkml.kernel.org/r/20180802151539.5373-1-jannh@google.com
Fixes: 48b32a3553a5 ("reiserfs: use generic xattr handlers")
Signed-off-by: Jann Horn <jannh@google.com>
Acked-by: Jeff Mahoney <jeffm@suse.com>
Cc: Eric Biggers <ebiggers@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

i2c: imx: Fix race condition in dma read

commit bed4ff1ed4d8f2ef5007c5c6ae1b29c5677a3632 upstream.

This fixes a race condition, where the DMAEN bit ends up being set after
I2C slave has transmitted a byte following the dummy read.  When that
happens, an interrupt is generated instead, and no DMA request is generated
to kickstart the DMA read, and a timeout happens after DMA_TIMEOUT (1 sec).

Fixed by setting the DMAEN bit before the dummy read.

Signed-off-by: Esben Haabendal <eha@deif.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

i2c: core: ACPI: Properly set status byte to 0 for multi-byte writes

commit c463a158cb6c5d9a85b7d894cd4f8116e8bd6be0 upstream.

acpi_gsb_i2c_write_bytes() returns i2c_transfer()'s return value, which
is the number of transfers executed on success, so 1.

The ACPI code expects us to store 0 in gsb->status for success, not 1.

Specifically this breaks the following code in the Thinkpad 8 DSDT:

            ECWR = I2CW = ECWR /* \_SB_.I2C1.BAT0.ECWR */
            If ((ECST == Zero))
            {
                ECRD = I2CR /* \_SB_.I2C1.I2CR */
            }

Before this commit we set ECST to 1, causing the read to never happen
breaking battery monitoring on the Thinkpad 8.

This commit makes acpi_gsb_i2c_write_bytes() return 0 when i2c_transfer()
returns 1, so the single write transfer completed successfully, and
makes it return -EIO on for other (unexpected) return values >= 0.

Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI: pciehp: Fix unprotected list iteration in IRQ handler

commit 1204e35bedf4e5015cda559ed8c84789a6dae24e upstream.

Commit b440bde74f04 ("PCI: Add pci_ignore_hotplug() to ignore hotplug
events for a device") iterates over the devices on a hotplug port's
subordinate bus in pciehp's IRQ handler without acquiring pci_bus_sem.
It is thus possible for a user to cause a crash by concurrently
manipulating the device list, e.g. by disabling slot power via sysfs
on a different CPU or by initiating a remove/rescan via sysfs.

This can't be fixed by acquiring pci_bus_sem because it may sleep.
The simplest fix is to avoid the list iteration altogether and just
check the ignore_hotplug flag on the port itself.  This works because
pci_ignore_hotplug() sets the flag both on the device as well as on its
parent bridge.

We do lose the ability to print the name of the device blocking hotplug
in the debug message, but that's probably bearable.

Fixes: b440bde74f04 ("PCI: Add pci_ignore_hotplug() to ignore hotplug events for a device")
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI: pciehp: Fix use-after-free on unplug

commit 281e878eab191cce4259abbbf1a0322e3adae02c upstream.

When pciehp is unbound (e.g. on unplug of a Thunderbolt device), the
hotplug_slot struct is deregistered and thus freed before freeing the
IRQ.  The IRQ handler and the work items it schedules print the slot
name referenced from the freed structure in various informational and
debug log messages, each time resulting in a quadruple dereference of
freed pointers (hotplug_slot -> pci_slot -> kobject -> name).

At best the slot name is logged as "(null)", at worst kernel memory is
exposed in logs or the driver crashes:

  pciehp 0000:10:00.0:pcie204: Slot((null)): Card not present

An attacker may provoke the bug by unplugging multiple devices on a
Thunderbolt daisy chain at once.  Unplugging can also be simulated by
powering down slots via sysfs.  The bug is particularly easy to trigger
in poll mode.

It has been present since the driver's introduction in 2004:
https://git.kernel.org/tglx/history/c/c16b4b14d980

Fix by rearranging teardown such that the IRQ is freed first.  Run the
work items queued by the IRQ handler to completion before freeing the
hotplug_slot struct by draining the work queue from the ->release_slot
callback which is invoked by pci_hp_deregister().

Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org # v2.6.4
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI: Skip MPS logic for Virtual Functions (VFs)

commit 3dbe97efe8bf450b183d6dee2305cbc032e6b8a4 upstream.

PCIe r4.0, sec 9.3.5.4, "Device Control Register", shows both
Max_Payload_Size (MPS) and Max_Read_request_Size (MRRS) to be 'RsvdP' for
VFs.  Just prior to the table it states:

  "PF and VF functionality is defined in Section 7.5.3.4 except where
   noted in Table 9-16.  For VF fields marked 'RsvdP', the PF setting
   applies to the VF."

All of which implies that with respect to Max_Payload_Size Supported
(MPSS), MPS, and MRRS values, we should not be paying any attention to the
VF's fields, but rather only to the PF's.  Only looking at the PF's fields
also logically makes sense as it's the sole physical interface to the PCIe
bus.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=200527
Fixes: 27d868b5e6cf ("PCI: Set MPS to match upstream bridge")
Signed-off-by: Myron Stowe <myron.stowe@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org # 4.3+
Cc: Keith Busch <keith.busch@intel.com>
Cc: Sinan Kaya <okaya@kernel.org>
Cc: Dongdong Liu <liudongdong3@huawei.com>
Cc: Jon Mason <jdmason@kudzu.us>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI: hotplug: Don't leak pci_slot on registration failure

commit 4ce6435820d1f1cc2c2788e232735eb244bcc8a3 upstream.

If addition of sysfs files fails on registration of a hotplug slot, the
struct pci_slot as well as the entry in the slot_list is leaked.  The
issue has been present since the hotplug core was introduced in 2002:
https://git.kernel.org/tglx/history/c/a8a2069f432c

Perhaps the idea was that even though sysfs addition fails, the slot
should still be usable.  But that's not how drivers use the interface,
they abort probe if a non-zero value is returned.

Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org # v2.4.15+
Cc: Greg Kroah-Hartman <greg@kroah.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

parisc: Remove unnecessary barriers from spinlock.h

commit 3b885ac1dc35b87a39ee176a6c7e2af9c789d8b8 upstream.

Now that mb() is an instruction barrier, it will slow performance if we issue
unnecessary barriers.

The spinlock defines have a number of unnecessary barriers.  The __ldcw()
define is both a hardware and compiler barrier.  The mb() barriers in the
routines using __ldcw() serve no purpose.

The only barrier needed is the one in arch_spin_unlock().  We need to ensure
all accesses are complete prior to releasing the lock.

Signed-off-by: John David Anglin <dave.anglin@bell.net>
Cc: stable@vger.kernel.org # 4.0+
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/smc: no shutdown in state SMC_LISTEN

commit caa21e19e08d7a1445116a93f7ab4e187ebbbadb upstream.

Invoking shutdown for a socket in state SMC_LISTEN does not make
sense. Nevertheless programs like syzbot fuzzing the kernel may
try to do this. For SMC this means a socket refcounting problem.
This patch makes sure a shutdown call for an SMC socket in state
SMC_LISTEN simply returns with -ENOTCONN.

Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

packet: refine ring v3 block size test to hold one frame

commit 4576cd469d980317c4edd9173f8b694aa71ea3a3 upstream.

TPACKET_V3 stores variable length frames in fixed length blocks.
Blocks must be able to store a block header, optional private space
and at least one minimum sized frame.

Frames, even for a zero snaplen packet, store metadata headers and
optional reserved space.

In the block size bounds check, ensure that the frame of the
chosen configuration fits. This includes sockaddr_ll and optional
tp_reserve.

Syzbot was able to construct a ring with insuffient room for the
sockaddr_ll in the header of a zero-length frame, triggering an
out-of-bounds write in dev_parse_header.

Convert the comparison to less than, as zero is a valid snap len.
This matches the test for minimum tp_frame_size immediately below.

Fixes: f6fb8f100b80 ("af-packet: TPACKET_V3 flexible buffer implementation.")
Fixes: eb73190f4fbe ("net/packet: refine check for priv area size")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: conntrack: dccp: treat SYNC/SYNCACK as invalid if no prior state

commit 6613b6173dee098997229caf1f3b961c49da75e6 upstream.

When first DCCP packet is SYNC or SYNCACK, we insert a new conntrack
that has an un-initialized timeout value, i.e. such entry could be
reaped at any time.

Mark them as INVALID and only ignore SYNC/SYNCACK when connection had
an old state.

Reported-by: syzbot+6f18401420df260e37ed@syzkaller.appspotmail.com
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xfrm_user: prevent leaking 2 bytes of kernel memory

commit 45c180bc29babbedd6b8c01b975780ef44d9d09c upstream.

struct xfrm_userpolicy_type has two holes, so we should not
use C99 style initializer.

KMSAN report:

BUG: KMSAN: kernel-infoleak in copyout lib/iov_iter.c:140 [inline]
BUG: KMSAN: kernel-infoleak in _copy_to_iter+0x1b14/0x2800 lib/iov_iter.c:571
CPU: 1 PID: 4520 Comm: syz-executor841 Not tainted 4.17.0+ #5
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x185/0x1d0 lib/dump_stack.c:113
 kmsan_report+0x188/0x2a0 mm/kmsan/kmsan.c:1117
 kmsan_internal_check_memory+0x138/0x1f0 mm/kmsan/kmsan.c:1211
 kmsan_copy_to_user+0x7a/0x160 mm/kmsan/kmsan.c:1253
 copyout lib/iov_iter.c:140 [inline]
 _copy_to_iter+0x1b14/0x2800 lib/iov_iter.c:571
 copy_to_iter include/linux/uio.h:106 [inline]
 skb_copy_datagram_iter+0x422/0xfa0 net/core/datagram.c:431
 skb_copy_datagram_msg include/linux/skbuff.h:3268 [inline]
 netlink_recvmsg+0x6f1/0x1900 net/netlink/af_netlink.c:1959
 sock_recvmsg_nosec net/socket.c:802 [inline]
 sock_recvmsg+0x1d6/0x230 net/socket.c:809
 ___sys_recvmsg+0x3fe/0x810 net/socket.c:2279
 __sys_recvmmsg+0x58e/0xe30 net/socket.c:2391
 do_sys_recvmmsg+0x2a6/0x3e0 net/socket.c:2472
 __do_sys_recvmmsg net/socket.c:2485 [inline]
 __se_sys_recvmmsg net/socket.c:2481 [inline]
 __x64_sys_recvmmsg+0x15d/0x1c0 net/socket.c:2481
 do_syscall_64+0x15b/0x230 arch/x86/entry/common.c:287
 entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x446ce9
RSP: 002b:00007fc307918db8 EFLAGS: 00000293 ORIG_RAX: 000000000000012b
RAX: ffffffffffffffda RBX: 00000000006dbc24 RCX: 0000000000446ce9
RDX: 000000000000000a RSI: 0000000020005040 RDI: 0000000000000003
RBP: 00000000006dbc20 R08: 0000000020004e40 R09: 0000000000000000
R10: 0000000040000000 R11: 0000000000000293 R12: 0000000000000000
R13: 00007ffc8d2df32f R14: 00007fc3079199c0 R15: 0000000000000001

Uninit was stored to memory at:
 kmsan_save_stack_with_flags mm/kmsan/kmsan.c:279 [inline]
 kmsan_save_stack mm/kmsan/kmsan.c:294 [inline]
 kmsan_internal_chain_origin+0x12b/0x210 mm/kmsan/kmsan.c:685
 kmsan_memcpy_origins+0x11d/0x170 mm/kmsan/kmsan.c:527
 __msan_memcpy+0x109/0x160 mm/kmsan/kmsan_instr.c:413
 __nla_put lib/nlattr.c:569 [inline]
 nla_put+0x276/0x340 lib/nlattr.c:627
 copy_to_user_policy_type net/xfrm/xfrm_user.c:1678 [inline]
 dump_one_policy+0xbe1/0x1090 net/xfrm/xfrm_user.c:1708
 xfrm_policy_walk+0x45a/0xd00 net/xfrm/xfrm_policy.c:1013
 xfrm_dump_policy+0x1c0/0x2a0 net/xfrm/xfrm_user.c:1749
 netlink_dump+0x9b5/0x1550 net/netlink/af_netlink.c:2226
 __netlink_dump_start+0x1131/0x1270 net/netlink/af_netlink.c:2323
 netlink_dump_start include/linux/netlink.h:214 [inline]
 xfrm_user_rcv_msg+0x8a3/0x9b0 net/xfrm/xfrm_user.c:2577
 netlink_rcv_skb+0x37e/0x600 net/netlink/af_netlink.c:2448
 xfrm_netlink_rcv+0xb2/0xf0 net/xfrm/xfrm_user.c:2598
 netlink_unicast_kernel net/netlink/af_netlink.c:1310 [inline]
 netlink_unicast+0x1680/0x1750 net/netlink/af_netlink.c:1336
 netlink_sendmsg+0x104f/0x1350 net/netlink/af_netlink.c:1901
 sock_sendmsg_nosec net/socket.c:629 [inline]
 sock_sendmsg net/socket.c:639 [inline]
 ___sys_sendmsg+0xec8/0x1320 net/socket.c:2117
 __sys_sendmsg net/socket.c:2155 [inline]
 __do_sys_sendmsg net/socket.c:2164 [inline]
 __se_sys_sendmsg net/socket.c:2162 [inline]
 __x64_sys_sendmsg+0x331/0x460 net/socket.c:2162
 do_syscall_64+0x15b/0x230 arch/x86/entry/common.c:287
 entry_SYSCALL_64_after_hwframe+0x44/0xa9
Local variable description: ----upt.i@dump_one_policy
Variable was created at:
 dump_one_policy+0x78/0x1090 net/xfrm/xfrm_user.c:1689
 xfrm_policy_walk+0x45a/0xd00 net/xfrm/xfrm_policy.c:1013

Byte 130 of 137 is uninitialized
Memory access starts at ffff88019550407f

Fixes: c0144beaeca42 ("[XFRM] netlink: Use nla_put()/NLA_PUT() variantes")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

parisc: Remove ordered stores from syscall.S

commit 7797167ffde1f00446301cb22b37b7c03194cfaf upstream.

Now that we use a sync prior to releasing the locks in syscall.S, we don't need
the PA 2.0 ordered stores used to release some locks.  Using an ordered store,
potentially slows the release and subsequent code.

There are a number of other ordered stores and loads that serve no purpose.  I
have converted these to normal stores.

Signed-off-by: John David Anglin <dave.anglin@bell.net>
Cc: stable@vger.kernel.org # 4.0+
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

f2fs: sanity check for total valid node blocks

commit 8a29c1260e24e7c9c6ab138aa0017558d8b28208 upstream.

This patch enhances sanity check for SIT entries.

syzbot hit the following crash on upstream commit
83beed7b2b26f232d782127792dd0cd4362fdc41 (Fri Apr 20 17:56:32 2018 +0000)
Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal
link: https://syzkaller.appspot.com/bug?extid=bf9253040425feb155ad
syzkaller reproducer: https://syzkaller.appspot.com/x/repro.syz?id=5692130282438656
Raw console output: https://syzkaller.appspot.com/x/log.txt?id=5095924598571008
Kernel config: https://syzkaller.appspot.com/x/.config?id=1808800213120130118
compiler: gcc (GCC) 8.0.1 20180413 (experimental)

IMPORTANT: if you fix the bug, please add the following tag to the commit:
Reported-by: syzbot+bf9253040425feb155ad@syzkaller.appspotmail.com
It will help syzbot understand when the bug is fixed. See footer for details.
If you forward the report, please keep this part and the footer.

F2FS-fs (loop0): invalid crc value
F2FS-fs (loop0): Try to recover 1th superblock, ret: 0
F2FS-fs (loop0): Mounted with checkpoint version = d
F2FS-fs (loop0): Bitmap was wrongly cleared, blk:9740
------------[ cut here ]------------
kernel BUG at fs/f2fs/segment.c:1884!
invalid opcode: 0000 [#1] SMP KASAN
Dumping ftrace buffer:
   (ftrace buffer empty)
Modules linked in:
CPU: 1 PID: 4508 Comm: syz-executor0 Not tainted 4.17.0-rc1+ #10
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:update_sit_entry+0x1215/0x1590 fs/f2fs/segment.c:1882
RSP: 0018:ffff8801af526708 EFLAGS: 00010282
RAX: ffffed0035ea4cc0 RBX: ffff8801ad454f90 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffffffff82eeb87e RDI: ffffed0035ea4cb6
RBP: ffff8801af526760 R08: ffff8801ad4a2480 R09: ffffed003b5e4f90
R10: ffffed003b5e4f90 R11: ffff8801daf27c87 R12: ffff8801adb8d380
R13: 0000000000000001 R14: 0000000000000008 R15: 00000000ffffffff
FS:  00000000014af940(0000) GS:ffff8801daf00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f06bc223000 CR3: 00000001adb02000 CR4: 00000000001406e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 allocate_data_block+0x66f/0x2050 fs/f2fs/segment.c:2663
 do_write_page+0x105/0x1b0 fs/f2fs/segment.c:2727
 write_node_page+0x129/0x350 fs/f2fs/segment.c:2770
 __write_node_page+0x7da/0x1370 fs/f2fs/node.c:1398
 sync_node_pages+0x18cf/0x1eb0 fs/f2fs/node.c:1652
 block_operations+0x429/0xa60 fs/f2fs/checkpoint.c:1088
 write_checkpoint+0x3ba/0x5380 fs/f2fs/checkpoint.c:1405
 f2fs_sync_fs+0x2fb/0x6a0 fs/f2fs/super.c:1077
 __sync_filesystem fs/sync.c:39 [inline]
 sync_filesystem+0x265/0x310 fs/sync.c:67
 generic_shutdown_super+0xd7/0x520 fs/super.c:429
 kill_block_super+0xa4/0x100 fs/super.c:1191
 kill_f2fs_super+0x9f/0xd0 fs/f2fs/super.c:3030
 deactivate_locked_super+0x97/0x100 fs/super.c:316
 deactivate_super+0x188/0x1b0 fs/super.c:347
 cleanup_mnt+0xbf/0x160 fs/namespace.c:1174
 __cleanup_mnt+0x16/0x20 fs/namespace.c:1181
 task_work_run+0x1e4/0x290 kernel/task_work.c:113
 tracehook_notify_resume include/linux/tracehook.h:191 [inline]
 exit_to_usermode_loop+0x2bd/0x310 arch/x86/entry/common.c:166
 prepare_exit_to_usermode arch/x86/entry/common.c:196 [inline]
 syscall_return_slowpath arch/x86/entry/common.c:265 [inline]
 do_syscall_64+0x6ac/0x800 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x457d97
RSP: 002b:00007ffd46f9c8e8 EFLAGS: 00000246 ORIG_RAX: 00000000000000a6
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000457d97
RDX: 00000000014b09a3 RSI: 0000000000000002 RDI: 00007ffd46f9da50
RBP: 00007ffd46f9da50 R08: 0000000000000000 R09: 0000000000000009
R10: 0000000000000005 R11: 0000000000000246 R12: 00000000014b0940
R13: 0000000000000000 R14: 0000000000000002 R15: 000000000000658e
RIP: update_sit_entry+0x1215/0x1590 fs/f2fs/segment.c:1882 RSP: ffff8801af526708
---[ end trace f498328bb02610a2 ]---

Reported-and-tested-by: syzbot+bf9253040425feb155ad@syzkaller.appspotmail.com
Reported-and-tested-by: syzbot+7d6d31d3bc702f566ce3@syzkaller.appspotmail.com
Reported-and-tested-by: syzbot+0a725420475916460f12@syzkaller.appspotmail.com
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

f2fs: return error during fill_super

commit c39a1b348c4fe172729eff77c533dabc3c7cdaa7 upstream.

Let's avoid BUG_ON during fill_super, when on-disk was totall corrupted.

Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: irqfd: fix race between EPOLLHUP and irq_bypass_register_consumer

commit 9432a3175770e06cb83eada2d91fac90c977cb99 upstream.

A comment warning against this bug is there, but the code is not doing what
the comment says.  Therefore it is possible that an EPOLLHUP races against
irq_bypass_register_consumer.  The EPOLLHUP handler schedules irqfd_shutdown,
and if that runs soon enough, you get a use-after-free.

Reported-by: syzbot <syzkaller@googlegroups.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nvme: fix handling of metadata_len for NVME_IOCTL_IO_CMD

[ Upstream commit 9b382768135ee3ff282f828c906574a8478e036b ]

The old code in nvme_user_cmd() passed the userspace virtual address
from nvme_passthru_cmd.metadata as the length of the metadata buffer
as well as the address to nvme_submit_user_cmd().

Fixes: 63263d60 ("nvme: Use metadata for passthrough commands")
Signed-off-by: Roland Dreier <roland@purestorage.com>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: dts: imx6: RDU2: fix irq type for mv88e6xxx switch

[ Upstream commit e01a06c8089132bb4da035c6a83df23916ca3ebf ]

The Marvell switches report their interrupts in a level sensitive way.
When using edge sensitive detection a race condition in the interrupt
handler of the swich might result in the OS to miss all future events
which might make the switch non-functional.

The problem is that both mv88e6xxx_g2_irq_thread_fn() and
mv88e6xxx_g1_irq_thread_work() sample the irq cause register
(MV88E6XXX_G2_INT_SRC and MV88E6XXX_G1_STS respectively) once and then
handle the observed sources. If after sampling but before all observed
irq sources are handled a new irq source gets active this is not noticed
by the handler which returns unsuspecting, but the interrupt line stays
active which prevents the edge detector to kick in.

All device trees but imx6qdl-zii-rdu2 get this right (most of them by
not specifying an interrupt parent). So fix imx6qdl-zii-rdu2
accordingly.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Fixes: f64992d1a916 ("ARM: dts: imx6: RDU2: Add Switch interrupts")
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ACPI / EC: Use ec_no_wakeup on more Thinkpad X1 Carbon 6th systems

[ Upstream commit 2c4d6baf1bc4f7729773ffcee9ba2a9781578633 ]

The ec_no_wakeup matcher added for Thinkpad X1 Carbon 6th gen systems
beyond matched only a single DMI model (20KGS3JF01), that didn't cover
my laptop (20KH002JUS). Change to match based on DMI product family to
cover all X1 6th gen systems.

Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

soc: imx: gpc: restrict register range for regmap access

[ Upstream commit de2d9b5284bcb5c159c5882ac69f6bfd4dec7c67 ]

GPC registers are NOT continuous, some registers are
reserved and accessing them from userspace will trigger
external abort, add regmap register access table to
avoid below abort:

root@imx6slevk:~# cat /sys/kernel/debug/regmap/20dc000.gpc/registers
[  108.480477] Unhandled fault: imprecise external abort (0x1406) at 0xb6db5004
[  108.487985] pgd = 42b54bfd
[  108.490741] [b6db5004] *pgd=ba1b7831
[  108.494386] Internal error: : 1406 [#1] SMP ARM
[  108.498943] Modules linked in:
[  108.502043] CPU: 0 PID: 389 Comm: cat Not tainted 4.18.0-rc1-00074-gc9f1f60-dirty #482
[  108.509982] Hardware name: Freescale i.MX6 SoloLite (Device Tree)
[  108.516123] PC is at regmap_mmio_read32le+0x20/0x24
[  108.521031] LR is at regmap_mmio_read+0x40/0x60
[  108.525586] pc : [<c059cf74>]    lr : [<c059d1ac>]    psr: 20060093
[  108.531875] sp : eccf1d98  ip : eccf1da8  fp : eccf1da4
[  108.537122] r10: ec2d3800  r9 : eccf1f60  r8 : ecfc0000
[  108.542370] r7 : eccf1e2c  r6 : eccf1e2c  r5 : 00000028  r4 : ec338e00
[  108.548920] r3 : 00000000  r2 : eccf1e2c  r1 : f0980028  r0 : 00000000
[  108.555474] Flags: nzCv  IRQs off  FIQs on  Mode SVC_32  ISA ARM  Segment none
[  108.562720] Control: 10c5387d  Table: acf4004a  DAC: 00000051
[  108.568491] Process cat (pid: 389, stack limit = 0xd4318a65)
[  108.574174] Stack: (0xeccf1d98 to 0xeccf2000)

Fixes: 721cabf6c660 ("soc: imx: move PGC handling to a new GPC driver")
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tcp: identify cryptic messages as TCP seq # bugs

[ Upstream commit e56b8ce363a36fb7b74b80aaa5cc9084f2c908b4 ]

Attempt to make cryptic TCP seq number error messages clearer by
(1) identifying the source of the message as "TCP", (2) identifying the
errors as "seq # bug", and (3) grouping the field identifiers and values
by separating them with commas.

E.g., the following message is changed from:

recvmsg bug 2: copied 73BCB6CD seq 70F17CBE rcvnxt 73BCB9AA fl 0
WARNING: CPU: 2 PID: 1501 at /linux/net/ipv4/tcp.c:1881 tcp_recvmsg+0x649/0xb90

to:

TCP recvmsg seq # bug 2: copied 73BCB6CD, seq 70F17CBE, rcvnxt 73BCB9AA, fl 0
WARNING: CPU: 2 PID: 1501 at /linux/net/ipv4/tcp.c:2011 tcp_recvmsg+0x694/0xba0

Suggested-by: 積丹尼 Dan Jacobson <jidanni@jidanni.org>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: qca_spi: Fix log level if probe fails

[ Upstream commit 50973993260a6934f0a00da53d9b746cfbea89ab ]

In cases the probing fails the log level of the messages should
be an error.

Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: qca_spi: Make sure the QCA7000 reset is triggered

[ Upstream commit 711c62dfa6bdb4326ca6c587f295ea5c4f7269de ]

In case the SPI thread is not running, a simple reset of sync
state won't fix the transmit timeout. We also need to wake up the kernel
thread.

Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Fixes: ed7d42e24eff ("net: qca_spi: fix transmit queue timeout handling")
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: qca_spi: Avoid packet drop during initial sync

[ Upstream commit b2bab426dc715de147f8039a3fccff27d795f4eb ]

As long as the synchronization with the QCA7000 isn't finished, we
cannot accept packets from the upper layers. So let the SPI thread
enable the TX queue after sync and avoid unwanted packet drop.

Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Fixes: 291ab06ecf67 ("net: qualcomm: new Ethernet over SPI driver for QCA7000")
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI: versatile: Fix I/O space page leak

[ Upstream commit 0018b265adf7e251f90d3ca1c7c0e32e2a0ad262 ]

When testing the R-Car PCIe driver on the Condor board, if the PCIe PHY
driver was left disabled, the kernel crashed with this BUG:

  kernel BUG at lib/ioremap.c:72!
  Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
  Modules linked in:
  CPU: 0 PID: 39 Comm: kworker/0:1 Not tainted 4.17.0-dirty #1092
  Hardware name: Renesas Condor board based on r8a77980 (DT)
  Workqueue: events deferred_probe_work_func
  pstate: 80000005 (Nzcv daif -PAN -UAO)
  pc : ioremap_page_range+0x370/0x3c8
  lr : ioremap_page_range+0x40/0x3c8
  sp : ffff000008da39e0
  x29: ffff000008da39e0 x28: 00e8000000000f07
  x27: ffff7dfffee00000 x26: 0140000000000000
  x25: ffff7dfffef00000 x24: 00000000000fe100
  x23: ffff80007b906000 x22: ffff000008ab8000
  x21: ffff000008bb1d58 x20: ffff7dfffef00000
  x19: ffff800009c30fb8 x18: 0000000000000001
  x17: 00000000000152d0 x16: 00000000014012d0
  x15: 0000000000000000 x14: 0720072007200720
  x13: 0720072007200720 x12: 0720072007200720
  x11: 0720072007300730 x10: 00000000000000ae
  x9 : 0000000000000000 x8 : ffff7dffff000000
  x7 : 0000000000000000 x6 : 0000000000000100
  x5 : 0000000000000000 x4 : 000000007b906000
  x3 : ffff80007c61a880 x2 : ffff7dfffeefffff
  x1 : 0000000040000000 x0 : 00e80000fe100f07
  Process kworker/0:1 (pid: 39, stack limit = 0x        (ptrval))
  Call trace:
   ioremap_page_range+0x370/0x3c8
   pci_remap_iospace+0x7c/0xac
   pci_parse_request_of_pci_ranges+0x13c/0x190
   rcar_pcie_probe+0x4c/0xb04
   platform_drv_probe+0x50/0xbc
   driver_probe_device+0x21c/0x308
   __device_attach_driver+0x98/0xc8
   bus_for_each_drv+0x54/0x94
   __device_attach+0xc4/0x12c
   device_initial_probe+0x10/0x18
   bus_probe_device+0x90/0x98
   deferred_probe_work_func+0xb0/0x150
   process_one_work+0x12c/0x29c
   worker_thread+0x200/0x3fc
   kthread+0x108/0x134
   ret_from_fork+0x10/0x18
  Code: f9004ba2 54000080 aa0003fb 17ffff48 (d4210000)

It turned out that pci_remap_iospace() wasn't undone when the driver's
probe failed, and since devm_phy_optional_get() returned -EPROBE_DEFER,
the probe was retried, finally causing the BUG due to trying to remap
already remapped pages.

The Versatile PCI controller driver has the same issue.
Replace pci_remap_iospace() with the devm_ managed version to fix the bug.

Fixes: b7e78170efd4 ("PCI: versatile: Add DT-based ARM Versatile PB PCIe host driver")
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
[lorenzo.pieralisi@arm.com: updated the commit log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI: OF: Fix I/O space page leak

commit a5fb9fb023a1435f2b42bccd7f547560f3a21dc3 upstream.

When testing the R-Car PCIe driver on the Condor board, if the PCIe PHY
driver was left disabled, the kernel crashed with this BUG:

  kernel BUG at lib/ioremap.c:72!
  Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
  Modules linked in:
  CPU: 0 PID: 39 Comm: kworker/0:1 Not tainted 4.17.0-dirty #1092
  Hardware name: Renesas Condor board based on r8a77980 (DT)
  Workqueue: events deferred_probe_work_func
  pstate: 80000005 (Nzcv daif -PAN -UAO)
  pc : ioremap_page_range+0x370/0x3c8
  lr : ioremap_page_range+0x40/0x3c8
  sp : ffff000008da39e0
  x29: ffff000008da39e0 x28: 00e8000000000f07
  x27: ffff7dfffee00000 x26: 0140000000000000
  x25: ffff7dfffef00000 x24: 00000000000fe100
  x23: ffff80007b906000 x22: ffff000008ab8000
  x21: ffff000008bb1d58 x20: ffff7dfffef00000
  x19: ffff800009c30fb8 x18: 0000000000000001
  x17: 00000000000152d0 x16: 00000000014012d0
  x15: 0000000000000000 x14: 0720072007200720
  x13: 0720072007200720 x12: 0720072007200720
  x11: 0720072007300730 x10: 00000000000000ae
  x9 : 0000000000000000 x8 : ffff7dffff000000
  x7 : 0000000000000000 x6 : 0000000000000100
  x5 : 0000000000000000 x4 : 000000007b906000
  x3 : ffff80007c61a880 x2 : ffff7dfffeefffff
  x1 : 0000000040000000 x0 : 00e80000fe100f07
  Process kworker/0:1 (pid: 39, stack limit = 0x        (ptrval))
  Call trace:
   ioremap_page_range+0x370/0x3c8
   pci_remap_iospace+0x7c/0xac
   pci_parse_request_of_pci_ranges+0x13c/0x190
   rcar_pcie_probe+0x4c/0xb04
   platform_drv_probe+0x50/0xbc
   driver_probe_device+0x21c/0x308
   __device_attach_driver+0x98/0xc8
   bus_for_each_drv+0x54/0x94
   __device_attach+0xc4/0x12c
   device_initial_probe+0x10/0x18
   bus_probe_device+0x90/0x98
   deferred_probe_work_func+0xb0/0x150
   process_one_work+0x12c/0x29c
   worker_thread+0x200/0x3fc
   kthread+0x108/0x134
   ret_from_fork+0x10/0x18
  Code: f9004ba2 54000080 aa0003fb 17ffff48 (d4210000)

It turned out that pci_remap_iospace() wasn't undone when the driver's
probe failed, and since devm_phy_optional_get() returned -EPROBE_DEFER,
the probe was retried, finally causing the BUG due to trying to remap
already remapped pages.

Introduce the devm_pci_remap_iospace() managed API and replace the
pci_remap_iospace() call with it to fix the bug.

Fixes: dbf9826d5797 ("PCI: generic: Convert to DT resource parsing API")
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
[lorenzo.pieralisi@arm.com: split commit/updated the commit log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kvmclock: fix TSC calibration for nested guests

[ Upstream commit e10f7805032365cc11c739a97f226ebb48aee042 ]

Inside a nested guest, access to hardware can be slow enough that
tsc_read_refs always return ULLONG_MAX, causing tsc_refine_calibration_work
to be called periodically and the nested guest to spend a lot of time
reading the ACPI timer.

However, if the TSC frequency is available from the pvclock page,
we can just set X86_FEATURE_TSC_KNOWN_FREQ and avoid the recalibration.
'refine' operation.

Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Peng Hao <peng.hao2@zte.com.cn>
[Commit message rewritten. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: usb: rtl8150: demote allmulti message to dev_dbg()

[ Upstream commit 3a9b0455062ffb9d2f6cd4473a76e3456f318c9f ]

This driver can spam the kernel log with multiple messages of:

    net eth0: eth0: allmulti set

Usually 4 or 8 at a time (probably because of using ConnMan).

This message doesn't seem useful, so let's demote it from dev_info()
to dev_dbg().

Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

octeon_mgmt: Fix MIX registers configuration on MTU setup

[ Upstream commit 4aac0b43474d18f6160302a3caa147d77fa3baa1 ]

octeon_mgmt driver doesn't drop RX frames that are 1-4 bytes bigger than
MTU set for the corresponding interface. The problem is in the
AGL_GMX_RX0/1_FRM_MAX register setting, which should not account for VLAN
tagging.

According to Octeon HW manual:
"For tagged frames, MAX increases by four bytes for each VLAN found up to a
maximum of two VLANs, or MAX + 8 bytes."

OCTEON_FRAME_HEADER_LEN "define" is fine for ring buffer management, but
should not be used for AGL_GMX_RX0/1_FRM_MAX.

The problem could be easily reproduced using "ping" command. If affected
system has default MTU 1500, other host (having MTU >= 1504) can
successfully "ping" the affected system with payload size 1473-1476,
resulting in IP packets of size 1501-1504 accepted by the mgmt driver.
Fixed system still accepts IP packets of 1500 bytes even with VLAN tagging,
because the limits are lifted in HW as expected, for every VLAN tag.

Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: scrub: Don't use inode page cache in scrub_handle_errored_block()

[ Upstream commit 665d4953cde6d9e75c62a07ec8f4f8fd7d396ade ]

In commit ac0b4145d662 ("btrfs: scrub: Don't use inode pages for device
replace") we removed the branch of copy_nocow_pages() to avoid
corruption for compressed nodatasum extents.

However above commit only solves the problem in scrub_extent(), if
during scrub_pages() we failed to read some pages,
sctx->no_io_error_seen will be non-zero and we go to fixup function
scrub_handle_errored_block().

In scrub_handle_errored_block(), for sctx without csum (no matter if
we're doing replace or scrub) we go to scrub_fixup_nodatasum() routine,
which does the similar thing with copy_nocow_pages(), but does it
without the extra check in copy_nocow_pages() routine.

So for test cases like btrfs/100, where we emulate read errors during
replace/scrub, we could corrupt compressed extent data again.

This patch will fix it just by avoiding any "optimization" for
nodatasum, just falls back to the normal fixup routine by try read from
any good copy.

This also solves WARN_ON() or dead lock caused by lame backref iteration
in scrub_fixup_nodatasum() routine.

The deadlock or WARN_ON() won't be triggered before commit ac0b4145d662
("btrfs: scrub: Don't use inode pages for device replace") since
copy_nocow_pages() have better locking and extra check for data extent,
and it's already doing the fixup work by try to read data from any good
copy, so it won't go scrub_fixup_nodatasum() anyway.

This patch disables the faulty code and will be removed completely in a
followup patch.

Fixes: ac0b4145d662 ("btrfs: scrub: Don't use inode pages for device replace")
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ibmvnic: Fix error recovery on login failure

[ Upstream commit 3578a7ecb69920efc3885dbd610e98c00dbdf5db ]

Testing has uncovered a failure case that is not handled properly. In the
event that a login fails and we are not able to recover on the spot, we
return 0 from do_reset, preventing any error recovery code from being
triggered.  Additionally, the state is set to "probed" meaning that when we
are able to trigger the error recovery, the driver always comes up in the
probed state. To handle the case properly, we need to return a failure code
here and set the adapter state to the state that we entered the reset in
indicating the state that we would like to come out of the recovery reset
in.

Signed-off-by: John Allen <jallen@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/ethernet/freescale/fman: fix cross-build error

[ Upstream commit c133459765fae249ba482f62e12f987aec4376f0 ]

  CC [M]  drivers/net/ethernet/freescale/fman/fman.o
In file included from ../drivers/net/ethernet/freescale/fman/fman.c:35:
../include/linux/fsl/guts.h: In function 'guts_set_dmacr':
../include/linux/fsl/guts.h:165:2: error: implicit declaration of function 'clrsetbits_be32' [-Werror=implicit-function-declaration]
  clrsetbits_be32(&guts->dmacr, 3 << shift, device << shift);
  ^~~~~~~~~~~~~~~

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Madalin Bucur <madalin.bucur@nxp.com>
Cc: netdev@vger.kernel.org
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hv/netvsc: fix handling of fallback to single queue mode

[ Upstream commit 916c5e1413be058d1c1f6e502db350df890730ce ]

The netvsc device may need to fallback to running in single queue
mode if host side only wants to support single queue.

Recent change for handling mtu broke this in setup logic.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: 3ffe64f1a641 ("hv_netvsc: split sub-channel setup into async and sync")
Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/nouveau/gem: off by one bugs in nouveau_gem_pushbuf_reloc_apply()

[ Upstream commit 7f073d011f93e92d4d225526b9ab6b8b0bbd6613 ]

The bo array has req->nr_buffers elements so the > should be >= so we
don't read beyond the end of the array.

Fixes: a1606a9596e5 ("drm/nouveau: new gem pushbuf interface, bump to 0.0.16")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pinctrl: nsp: Fix potential NULL dereference

[ Upstream commit c29e9da56bebb4c2c794e871b0dc0298bbf08142 ]

platform_get_resource() may fail and return NULL, so we should
better check it's return value to avoid a NULL pointer dereference
a bit later in the code.

This is detected by Coccinelle semantic patch.

@@
expression pdev, res, n, t, e, e1, e2;
@@

res = platform_get_resource(pdev, t, n);
+ if (!res)
+   return -EINVAL;
... when != res == NULL
e = devm_ioremap_nocache(e1, res->start, e2);

Fixes: cc4fa83f66e9 ("pinctrl: nsp: add pinmux driver support for Broadcom NSP SoC")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: Ray Jui <ray.jui@broadcom.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pinctrl: nsp: off by ones in nsp_pinmux_enable()

[ Upstream commit f90a21c898db58eaea14b8ad7e9af3b9e15e5f8a ]

The > comparisons should be >= or else we read beyond the end of the
pinctrl->functions[] array.

Fixes: cc4fa83f66e9 ("pinctrl: nsp: add pinmux driver support for Broadcom NSP SoC")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Ray Jui <ray.jui@broadcom.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pinctrl: ingenic: Fix inverted direction for < JZ4770

[ Upstream commit 0084a786ca8c84b443f67c4a697b4f2552761650 ]

The .gpio_set_direction() callback was setting inverted direction
for SoCs older than the JZ4770, this restores the correct behaviour.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tcp: remove DELAYED ACK events in DCTCP

[ Upstream commit a69258f7aa2623e0930212f09c586fd06674ad79 ]

After fixing the way DCTCP tracking delayed ACKs, the delayed-ACK
related callbacks are no longer needed

Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Acked-by: Lawrence Brakmo <brakmo@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

qlogic: check kstrtoul() for errors

[ Upstream commit 5fc853cc01c68f84984ecc2d5fd777ecad78240f ]

We accidentally left out the error handling for kstrtoul().

Fixes: a520030e326a ("qlcnic: Implement flash sysfs callback for 83xx adapter")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

packet: reset network header if packet shorter than ll reserved space

[ Upstream commit 993675a3100b16a4c80dfd70cbcde8ea7127b31d ]

If variable length link layer headers result in a packet shorter
than dev->hard_header_len, reset the network header offset. Else
skb->mac_len may exceed skb->len after skb_mac_reset_len.

packet_sendmsg_spkt already has similar logic.

Fixes: b84bbaf7a6c8 ("packet: in packet_snd start writing at link layer allocation")
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kbuild: suppress warnings from 'getconf LFS_*'

[ Upstream commit 6d79a7b424a5630a6fcab31fd7c38af4ea9c9a0f ]

Suppress warnings for systems that do not recognize LFS_*.

 getconf: no such configuration parameter `LFS_CFLAGS'
 getconf: no such configuration parameter `LFS_LDFLAGS'
 getconf: no such configuration parameter `LFS_LIBS'

Fixes: d7f14c66c273 ("kbuild: Enable Large File Support for hostprogs")
Reported-by: Chen Feng <puck.chen@hisilicon.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tools: build: Use HOSTLDFLAGS with fixdep

[ Upstream commit 8b247a92ebd0cda7dec49a6f771d9c4950f3d3ad ]

The final link of fixdep uses LDFLAGS but not the existing HOSTLDFLAGS.
Fix this.

Signed-off-by: Laura Abbott <labbott@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ixgbe: Be more careful when modifying MAC filters

[ Upstream commit d14c780c11fbc10f66c43e7b64eefe87ca442bd3 ]

This change makes it so that we are much more explicit about the ordering
of updates to the receive address register (RAR) table. Prior to this patch
I believe we may have been updating the table while entries were still
active, or possibly allowing for reordering of things since we weren't
explicitly flushing writes to either the lower or upper portion of the
register prior to accessing the other half.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Reviewed-by: Shannon Nelson <shannon.nelson@oracle.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: dts: am3517.dtsi: Disable reference to OMAP3 OTG controller

[ Upstream commit 923847413f7316b5ced3491769b3fefa6c56a79a ]

The AM3517 has a different OTG controller location than the OMAP3,
which is included from omap3.dtsi.  This results in a hwmod error.
Since the AM3517 has a different OTG controller address, this patch
disabes one that is isn't available.

Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: DRA7/OMAP5: Enable ACTLR[0] (Enable invalidates of BTB) for secondary cores

[ Upstream commit 2f8b5b21830aea95989a6e67d8a971297272a086 ]

Call secure services to enable ACTLR[0] (Enable invalidates of BTB with
ICIALLU) when branch hardening is enabled for kernel.

On GP devices OMAP5/DRA7, there is no possibility to update secure
side since "secure world" is ROM and there are no override mechanisms
possible. On HS devices, appropriate PPA should do the workarounds as
well.

However, the configuration is only done for secondary core, since it is
expected that firmware/bootloader will have enabled the required
configuration for the primary boot core (note: bootloaders typically
will NOT enable secondary processors, since it has no need to do so).

Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: 8780/1: ftrace: Only set kernel memory back to read-only after boot

[ Upstream commit b4c7e2bd2eb4764afe3af9409ff3b1b87116fa30 ]

Dynamic ftrace requires modifying the code segments that are usually
set to read-only. To do this, a per arch function is called both before
and after the ftrace modifications are performed. The "before" function
will set kernel code text to read-write to allow for ftrace to make the
modifications, and the "after" function will set the kernel code text
back to "read-only" to keep the kernel code text protected.

The issue happens when dynamic ftrace is tested at boot up. The test is
done before the kernel code text has been set to read-only. But the
"before" and "after" calls are still performed. The "after" call will
change the kernel code text to read-only prematurely, and other boot
code that expects this code to be read-write will fail.

The solution is to add a variable that is set when the kernel code text
is expected to be converted to read-only, and make the ftrace "before"
and "after" calls do nothing if that variable is not yet set. This is
similar to the x86 solution from commit 162396309745 ("ftrace, x86:
make kernel text writable only for conversions").

Link: http://lkml.kernel.org/r/20180620212906.24b7b66e@vmware.local.home
Reported-by: Stefan Agner <stefan@agner.ch>
Tested-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

RDMA/mlx5: Fix memory leak in mlx5_ib_create_srq() error path

[ Upstream commit d63c46734c545ad0488761059004a65c46efdde3 ]

Fix memory leak in the error path of mlx5_ib_create_srq() by making sure
to free the allocated srq.

Fixes: c2b37f76485f ("IB/mlx5: Fix integer overflows in mlx5_ib_create_srq")
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Acked-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nfit: fix unchecked dereference in acpi_nfit_ctl

[ Upstream commit ee6581ceba7f8314b81b2f2a81f1cf3f67c679e2 ]

Incremental patch to fix the unchecked dereference in acpi_nfit_ctl.
Reported by Dan Carpenter:

"acpi/nfit: fix cmd_rc for acpi_nfit_ctl to
always return a value" from Jun 28, 2018, leads to the following
Smatch complaint:

    drivers/acpi/nfit/core.c:578 acpi_nfit_ctl()
     warn: variable dereferenced before check 'cmd_rc' (see line 411)

drivers/acpi/nfit/core.c
   410
   411 *cmd_rc = -EINVAL;
                ^^^^^^^^^^^^^^^^^^
Patch adds unchecked dereference.

Fixes: c1985cefd844 ("acpi/nfit: fix cmd_rc for acpi_nfit_ctl to always return a value")

Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf script python: Fix dict reference counting

[ Upstream commit db0ba84c04ef2cf293aaada5ae97531127844d9d ]

The dictionaries are attached to the parameter tuple that steals the
references and takes care of releasing them when appropriate.  The code
should not decrement the reference counts explicitly.  E.g. if libpython
has been built with reference debugging enabled, the superfluous DECREFs
will trigger this error when running perf script:

  Fatal Python error: Objects/tupleobject.c:238 object at
  0x7f10f2041b40 has negative ref count -1
  Aborted (core dumped)

If the reference debugging is not enabled, the superfluous DECREFs might
cause the dict objects to be silently released while they are still in
use. This may trigger various other assertions or just cause perf
crashes and/or weird and unexpected data changes in the stored Python
objects.

Signed-off-by: Janne Huttunen <janne.huttunen@nokia.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jaroslav Skarvada <jskarvad@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1531133990-17485-1-git-send-email-janne.huttunen@nokia.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf tools: Fix compilation errors on gcc8

[ Upstream commit a09603f851045b031e990d2d663958ccb49db525 ]

We are getting following warnings on gcc8 that break compilation:

  $ make
    CC       jvmti/jvmti_agent.o
  jvmti/jvmti_agent.c: In function ‘jvmti_open’:
  jvmti/jvmti_agent.c:252:35: error: ‘/jit-’ directive output may be truncated \
    writing 5 bytes into a region of size between 1 and 4096 [-Werror=format-truncation=]
    snprintf(dump_path, PATH_MAX, "%s/jit-%i.dump", jit_path, getpid());

There's no point in checking the result of snprintf call in
jvmti_open, the following open call will fail in case the
name is mangled or too long.

Using tools/lib/ function scnprintf that touches the return value from
the snprintf() calls and thus get rid of those warnings.

  $ make DEBUG=1
    CC       arch/x86/util/perf_regs.o
  arch/x86/util/perf_regs.c: In function ‘arch_sdt_arg_parse_op’:
  arch/x86/util/perf_regs.c:229:4: error: ‘strncpy’ output truncated before terminating nul
  copying 2 bytes from a string of the same length [-Werror=stringop-truncation]
    strncpy(prefix, "+0", 2);
    ^~~~~~~~~~~~~~~~~~~~~~~~

Using scnprintf instead of the strncpy (which we know is safe in here)
to get rid of that warning.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180702134202.17745-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf llvm-utils: Remove bashism from kernel include fetch script

[ Upstream commit f6432b9f65001651412dbc3589d251534822d4ab ]

Like system(), popen() calls /bin/sh, which may/may not be bash.

Script when run on dash and encounters the line, yields:

 exit: Illegal number: -1

checkbashisms report on script content:

 possible bashism (exit|return with negative status code):
 exit -1

Remove the bashism and use the more portable non-zero failure
status code 1.

Signed-off-by: Kim Phillips <kim.phillips@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sandipan Das <sandipan@linux.vnet.ibm.com>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20180629124652.8d0af7e2281fd3fd8262cacc@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: qedi: Send driver state to MFW

[ Upstream commit a3440d0d2f57f7ba102fc332086961cf261180af ]

In case of iSCSI offload BFS environment, MFW requires to mark virtual
link based upon qedi load status.

Signed-off-by: Manish Rangankar <manish.rangankar@qlogic.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: qedf: Send the driver state to MFW

[ Upstream commit 6ac174756dfc9884f08b23af840ca911155f5578 ]

Need to notify firmware when driver is loaded and unloaded.

Signed-off-by: Saurav Kashyap <saurav.kashyap@cavium.com>
Signed-off-by: Chad Dupuis <chad.dupuis@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bnxt_en: Fix for system hang if request_irq fails

[ Upstream commit c58387ab1614f6d7fb9e244f214b61e7631421fc ]

Fix bug in the error code path when bnxt_request_irq() returns failure.
bnxt_disable_napi() should not be called in this error path because
NAPI has not been enabled yet.

Fixes: c0c050c58d84 ("bnxt_en: New Broadcom ethernet driver.")
Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bnxt_en: Always set output parameters in bnxt_get_max_rings().

[ Upstream commit 78f058a4aa0f2280dc4d45d2c4a95728398ef857 ]

The current code returns -ENOMEM and does not bother to set the output
parameters to 0 when no rings are available.  Some callers, such as
bnxt_get_channels() will display garbage ring numbers when that happens.
Fix it by always setting the output parameters.

Fixes: 6e6c5a57fbe1 ("bnxt_en: Modify bnxt_get_max_rings() to support shared or non shared rings.")
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bnxt_en: Fix inconsistent BNXT_FLAG_AGG_RINGS logic.

[ Upstream commit 07f4fde53d12eb8d921b465bb298e964e0bdc38c ]

If there aren't enough RX rings available, the driver will attempt to
use a single RX ring without the aggregation ring.  If that also
fails, the BNXT_FLAG_AGG_RINGS flag is cleared but the other ring
parameters are not set consistently to reflect that.  If more RX
rings become available at the next open, the RX rings will be in
an inconsistent state and may crash when freeing the RX rings.

Fix it by restoring the BNXT_FLAG_AGG_RINGS if not enough RX rings are
available to run without aggregation rings.

Fixes: bdbd1eb59c56 ("bnxt_en: Handle no aggregation ring gracefully.")
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARC: Improve cmpxchg syscall implementation

[ Upstream commit e8708786d4fe21c043d38d760f768949a3d71185 ]

This is used in configs lacking hardware atomics to emulate atomic r-m-w
for user space, implemented by disabling preemption in kernel.

However there are issues in current implementation:

1. Process not terminated if invalid user pointer passed:
   i.e. __get_user() failed.

2. The reason for this patch was __put_user() failure not being handled
   either, specifically for the COW break scenario.
   The zero page is initially wired up and read from __get_user()
   succeeds. A subsequent write by __put_user() induces a
   Protection Violation, but COW can't finish as Linux page fault
   handler is disabled due to preempt disable.
   And what's worse is we silently return the stale value to user space.
   Fix this specific case by re-enabling preemption and explicitly
   fixing up the fault and retrying the whole sequence over.

Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: linux-arch@vger.kernel.org
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
[vgupta: rewrote the changelog]
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: nf_conntrack: Fix possible possible crash on module loading.

[ Upstream commit 2045cdfa1b40d66f126f3fd05604fc7c754f0022 ]

Loading the nf_conntrack module with doubled hashsize parameter, i.e.
  modprobe nf_conntrack hashsize=12345 hashsize=12345
causes NULL-ptr deref.

If 'hashsize' specified twice, the nf_conntrack_set_hashsize() function
will be called also twice.
The first nf_conntrack_set_hashsize() call will set the
'nf_conntrack_htable_size' variable:

nf_conntrack_set_hashsize()
...
/* On boot, we can set this without any fancy locking. */
if (!nf_conntrack_htable_size)
return param_set_uint(val, kp);

But on the second invocation, the nf_conntrack_htable_size is already set,
so the nf_conntrack_set_hashsize() will take a different path and call
the nf_conntrack_hash_resize() function. Which will crash on the attempt
to dereference 'nf_conntrack_hash' pointer:

BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
RIP: 0010:nf_conntrack_hash_resize+0x255/0x490 [nf_conntrack]
Call Trace:
 nf_conntrack_set_hashsize+0xcd/0x100 [nf_conntrack]
 parse_args+0x1f9/0x5a0
 load_module+0x1281/0x1a50
 __se_sys_finit_module+0xbe/0xf0
 do_syscall_64+0x7c/0x390
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

Fix this, by checking !nf_conntrack_hash instead of
!nf_conntrack_htable_size. nf_conntrack_hash will be initialized only
after the module loaded, so the second invocation of the
nf_conntrack_set_hashsize() won't crash, it will just reinitialize
nf_conntrack_htable_size again.

Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netfilter: nft_compat: explicitly reject ERROR and standard target

[ Upstream commit 21d5e078192d244df3d6049f9464fff2f72cfd68 ]

iptables-nft never requests these, but make this explicitly illegal.
If it were quested, kernel could oops as ->eval is NULL, furthermore,
the builtin targets have no owning module so its possible to rmmod
eb/ip/ip6_tables module even if they would be loaded.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/armada: fix irq handling

[ Upstream commit 92298c1cd8e8a6b56322b602ad72b54e6237631d ]

Add the missing locks to the IRQ enable/disable paths, and fix a comment
in the interrupt handler: reading the ISR clears down the status bits,
but does not reset the interrupt so it can signal again.  That seems to
require a write.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/armada: fix colorkey mode property

[ Upstream commit d378859a667edc99e3473704847698cae97ca2b1 ]

The colorkey mode property was not correctly disabling the colorkeying
when "disabled" mode was selected.  Arrange for this to work as one
would expect.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/tegra: Fix comparison operator for buffer size

[ Upstream commit 5265f0338bc0feec6c0d544dfe005dec1a93cb93 ]

Here we are checking for the buffer length, not an offset for writing
to, so using > is correct. The current code incorrectly rejects a
command buffer ending at the memory buffer's end.

Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>