Sebastian Dröge [Mon, 22 Jul 2013 13:22:55 +0000 (15:22 +0200)]
matroskademux: Add support for group-id in the stream-start event
Sebastian Dröge [Mon, 22 Jul 2013 13:22:47 +0000 (15:22 +0200)]
qtdemux: Add support for group-id in the stream-start event
Sebastian Dröge [Mon, 22 Jul 2013 13:22:36 +0000 (15:22 +0200)]
flvdemux: Add support for group-id in the stream-start event
Sebastian Dröge [Mon, 22 Jul 2013 13:22:16 +0000 (15:22 +0200)]
avidemux: Add support for group-id in the stream-start event
Sebastian Dröge [Mon, 22 Jul 2013 13:21:49 +0000 (15:21 +0200)]
dvdemux: Add support for group-id in the stream-start event
Mathieu Duponchelle [Fri, 19 Jul 2013 20:59:15 +0000 (22:59 +0200)]
videomixer: use gst_util_uint64_scale*_round.
There could be a case where:
1) you do a new set_caps after buffers have been processed.
2) ts_offset gets set to a different value, eg 0.
033333333
3) your pads get EOS, but the check dor that doesn't work
because you use ts_offset + a truncated value < segment.stop
4) so in the next collected, you end up comparing for example:
0.
9999999999 > 1., which is false and means you don't send EOS.
Also adds scale_round in two other places where it potentially could
have caused problems.
Olivier Crête [Mon, 15 Jul 2013 21:55:19 +0000 (17:55 -0400)]
qtdemux: Add WRLE support
Tim-Philipp Müller [Fri, 19 Jul 2013 18:35:26 +0000 (19:35 +0100)]
qtdemux: make files from Vivotek camera play
Skip tracks of 'vivo' subtype with empty stsd instead of
erroring out saying that the file is broken.
https://bugzilla.gnome.org/show_bug.cgi?id=699791
Tim-Philipp Müller [Fri, 19 Jul 2013 16:14:06 +0000 (17:14 +0100)]
qtmux: when streaming don't try to seek when stopping
It might cause errors in sinks that are not seekable and
have reported this (like e.g. fdsink)
https://bugzilla.gnome.org/show_bug.cgi?id=696228
Wim Taymans [Fri, 19 Jul 2013 15:26:54 +0000 (17:26 +0200)]
qtdemux: simplify some helpers
Some helper functions are not needed anymore or can be simplified.
Wim Taymans [Fri, 19 Jul 2013 15:12:37 +0000 (17:12 +0200)]
qtdemux: for non-raw video, move palette in caps
We only need to append the palette to raw video buffers, non-raw video has the
palette in the caps still.
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=704292
Arnaud Vrac [Thu, 18 Jul 2013 23:49:20 +0000 (01:49 +0200)]
qtdemux: nitpicking in esds parsing
Arnaud Vrac [Thu, 18 Jul 2013 23:49:07 +0000 (01:49 +0200)]
qtdemux: set proper caps for mpeg-1 audio
Remove AAC specific fields from mpeg-1 audio caps, remove assumption
that the mpeg1 audio layer is 3, and set `parsed' field.
https://bugzilla.gnome.org/show_bug.cgi?id=704548
Arnaud Vrac [Mon, 17 Jun 2013 19:27:37 +0000 (21:27 +0200)]
vpx: fix compilation when encoder or decoder headers are not installed
https://bugzilla.gnome.org/show_bug.cgi?id=704547
Nicolas Dufresne [Wed, 17 Jul 2013 00:41:15 +0000 (20:41 -0400)]
videocrop: Fix unit for GRAY16 formats
Arnaud Vrac [Tue, 16 Jul 2013 20:17:17 +0000 (22:17 +0200)]
qtdemux: remove chapter stream
Remove all streams that are actually table of contents, since we will
never need the data after parsing them.
Arnaud Vrac [Tue, 16 Jul 2013 19:59:37 +0000 (21:59 +0200)]
qtdemux: send gap event for sparse streams in push mode
This allows to pre-roll at least if the next subtitle buffer
is far away.
Arnaud Vrac [Tue, 16 Jul 2013 19:56:07 +0000 (21:56 +0200)]
qtdemux: do not use indexes from sparse stream when seeking in push mode
This makes seeking more accurate in push mode, since the previous
keyframe on a sparse stream might be far away.
Arnaud Vrac [Tue, 16 Jul 2013 19:04:07 +0000 (21:04 +0200)]
qtdemux: advertise subtitle streams as sparse
Arnaud Vrac [Wed, 17 Jul 2013 15:11:44 +0000 (17:11 +0200)]
mastrokademux: do not push discont buffers if they aren't discont
Unset the discont flag instead of posssibly pushing a buffer with
a flag that's still set.
https://bugzilla.gnome.org/show_bug.cgi?id=682110
Wim Taymans [Wed, 17 Jul 2013 13:10:00 +0000 (15:10 +0200)]
qtdemux: extract the palette from stsd
Sometimes a palette is inside the stsd, extract it instead of always using
the default one
Sebastian Dröge [Wed, 17 Jul 2013 12:30:16 +0000 (14:30 +0200)]
goom2k1: Fix event handling and negotiate as soon as possible
Sebastian Dröge [Wed, 17 Jul 2013 12:27:57 +0000 (14:27 +0200)]
goom: Fix event handling and negotiate as soon as possible
Andoni Morales Alastruey [Thu, 11 Jul 2013 17:45:17 +0000 (19:45 +0200)]
osxvideosink: warn about the future deprecation of the "embed" property
Wim Taymans [Wed, 17 Jul 2013 07:56:01 +0000 (09:56 +0200)]
qtdemux: add support for WRAW
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=704292
Wim Taymans [Wed, 17 Jul 2013 07:54:58 +0000 (09:54 +0200)]
qtdemux: palette is appended to buffers, not in caps
Fix the palette handling, in 1.0 we append the palette to the buffer instead of
placing it on the caps.
See also https://bugzilla.gnome.org/show_bug.cgi?id=704292
Olivier Crête [Tue, 16 Jul 2013 19:37:49 +0000 (15:37 -0400)]
rtp: Use gst_adapter_take_buffer_fast() where possible in RTP payloaders
Arnaud Vrac [Mon, 15 Jul 2013 14:24:07 +0000 (16:24 +0200)]
qtdemux: reset segment on flush stop
cca2f555d14 introduces a regression, where the demux segment is not
reset on flush stop, so the next upstream segment event will calculate
an invalid base time on the new segment to be sent downstream.
https://bugzilla.gnome.org/show_bug.cgi?id=704255
Matej Knopp [Sat, 6 Jul 2013 15:20:49 +0000 (17:20 +0200)]
qtdemux: offset samples according to edit list
https://bugzilla.gnome.org/show_bug.cgi?id=700264
Douglas Bagnall [Sun, 14 Jul 2013 00:50:13 +0000 (12:50 +1200)]
level: Fix the spectrum example for 1.0
The "message" property has been replaced by "post-messages".
Pre-patch output:
(test_spectrum:23101): GLib-GObject-WARNING **: g_object_set_valist:
object class `GstSpectrum' has no property named `message'
New spectrum message, endtime 0:00:00.
100000000
(test_spectrum:23101): GStreamer-CRITICAL **:
gst_value_list_get_value: assertion `GST_VALUE_HOLDS_LIST (value)' failed
[...]
Post-patch:
New spectrum message, endtime 0:00:00.
100000000
band 0 (freq 400): magnitude -65.988777 dB phase 1.533397
band 1 (freq 1200): magnitude -65.545563 dB phase -0.780900
band 2 (freq 2000): magnitude -64.791946 dB phase -0.799611
band 3 (freq 2800): magnitude -64.556175 dB phase -0.063615
[...]
https://bugzilla.gnome.org/show_bug.cgi?id=704179
Matej Knopp [Sat, 13 Jul 2013 18:56:26 +0000 (20:56 +0200)]
aacparse: be less verbose when parsing LOAS streams
https://bugzilla.gnome.org/show_bug.cgi?id=704162
Wim Taymans [Fri, 12 Jul 2013 10:31:39 +0000 (12:31 +0200)]
sink: alaw/mulaw caps don't have a layout property
Wim Taymans [Fri, 12 Jul 2013 10:27:53 +0000 (12:27 +0200)]
pulse: relax mulaw and alaw format checks
The audio library considers them as encoded formats and does not fill in the
sample width. The audio ringbuffers identifies the format as alaw/mulaw and that
is always 8 bits.
Matej Knopp [Thu, 11 Jul 2013 14:13:05 +0000 (16:13 +0200)]
qtdemux: unselect instead of ignoring disabled track, detect chapter track
https://bugzilla.gnome.org/show_bug.cgi?id=704007
Thiago Santos [Thu, 11 Jul 2013 23:41:23 +0000 (20:41 -0300)]
souphttpsrc: ignore errors from HEAD request
HEAD requests are used to check the server headers to see if it
seekable. Ignore errors from those requests as they shouldn't be
critical.
https://bugzilla.gnome.org/show_bug.cgi?id=704053
Kyosuke Nekomura [Thu, 11 Jul 2013 19:24:08 +0000 (03:24 +0800)]
audioecho: Fix handling of delay property in PLAYING/PAUSED state
https://bugzilla.gnome.org/show_bug.cgi?id=703901
Olivier Crête [Tue, 9 Jul 2013 21:56:57 +0000 (17:56 -0400)]
rtpmux: Enable proxy caps on the src pads
Sebastian Dröge [Thu, 11 Jul 2013 14:57:15 +0000 (16:57 +0200)]
Back to development
Sebastian Dröge [Thu, 11 Jul 2013 13:58:51 +0000 (15:58 +0200)]
Release 1.1.2
Sebastian Dröge [Thu, 11 Jul 2013 13:58:29 +0000 (15:58 +0200)]
Update .po files
Andoni Morales Alastruey [Tue, 9 Jul 2013 13:34:04 +0000 (15:34 +0200)]
osxvideosink: defer the window handle setup to the main thread
Andoni Morales Alastruey [Tue, 9 Jul 2013 13:33:18 +0000 (15:33 +0200)]
osxvideosink: default to the main in case we are not setup yet
Andoni Morales Alastruey [Sun, 7 Jul 2013 20:16:05 +0000 (22:16 +0200)]
osxvideosink: close the internal window correctly
Andoni Morales Alastruey [Sun, 7 Jul 2013 19:14:22 +0000 (21:14 +0200)]
osxvideosink: only create the NS app thread for Cocoa once
The helper thread for Cocoa, in case no NS run loop is running,
should be started only once and shared across all the instances
running
Matej Knopp [Tue, 9 Jul 2013 17:10:17 +0000 (19:10 +0200)]
qtdemux: correct argument order in gst_util_uint64_scale_int_round
https://bugzilla.gnome.org/show_bug.cgi?id=703350
Olivier Crête [Tue, 9 Jul 2013 21:42:59 +0000 (17:42 -0400)]
rtpmux: Keep caps order from the peer or the filter
Sebastian Dröge [Tue, 9 Jul 2013 10:42:17 +0000 (12:42 +0200)]
videomixer: Fix handling of buffers without a duration
We'll have to pop buffer from collectpads and store it
internally only to get the timestamp of the next buffer.
If we continue to keep it in collectpads, no new buffer
to calculate the end time will ever arrive.
https://bugzilla.gnome.org/show_bug.cgi?id=703743
Sebastian Dröge [Tue, 9 Jul 2013 09:53:07 +0000 (11:53 +0200)]
videomixer: Fix negotiation with 0/1 framerates
https://bugzilla.gnome.org/show_bug.cgi?id=703743
Jonas Holmberg [Tue, 9 Jul 2013 09:17:59 +0000 (11:17 +0200)]
matroskademux: Unlock stream lock after use
Stream lock of sink pad was not unlocked after non-updating seek.
Ognyan Tonchev [Thu, 27 Jun 2013 11:26:31 +0000 (13:26 +0200)]
multipartmux: Re-set need_segment flag after FLUSH_STOP
https://bugzilla.gnome.org/show_bug.cgi?id=703182
Michael Olbrich [Fri, 5 Jul 2013 09:51:04 +0000 (11:51 +0200)]
v4l2: bufferpool: don't forget to release buffer on error
If the pool is stopped while gst_v4l2_buffer_pool_dqbuf() waits for a
buffer then the return value is GST_FLOW_FLUSHING. In this case the buffer
to queue must also be released. Otherwise is will never be deleted or
returned to its pool.
https://bugzilla.gnome.org/show_bug.cgi?id=703764
Sebastian Dröge [Mon, 8 Jul 2013 12:15:10 +0000 (14:15 +0200)]
rtp: Fail payloading unit test if an error message is received
Sebastian Dröge [Mon, 8 Jul 2013 12:09:37 +0000 (14:09 +0200)]
rtph263ppay: Don't pass upstream filter caps to downstream
Downstream usually can't accept video/x-h263 but only application/x-rtp,
so we would always get an empty intersection here.
https://bugzilla.gnome.org/show_bug.cgi?id=702632
Piotr Drąg [Fri, 5 Jul 2013 20:00:37 +0000 (22:00 +0200)]
po: update POTFILES.in
https://bugzilla.gnome.org/show_bug.cgi?id=703685
Wim Taymans [Tue, 2 Jul 2013 09:13:25 +0000 (11:13 +0200)]
rtspsrc: avoid some strdup
Wim Taymans [Tue, 2 Jul 2013 08:37:50 +0000 (10:37 +0200)]
rtspsrc: add select-stream signal
Add a signal to let the app select what streams will be selected.
See https://bugzilla.gnome.org/show_bug.cgi?id=634419
Wim Taymans [Tue, 2 Jul 2013 08:37:35 +0000 (10:37 +0200)]
rtspsrc: avoid strdup
J. Rick Ramstetter [Tue, 2 Jul 2013 08:12:17 +0000 (10:12 +0200)]
rtp: Fix documentation and comments to use rtpbin instead of old gstrtpbin
https://bugzilla.gnome.org/show_bug.cgi?id=703426
Michael Olbrich [Mon, 1 Jul 2013 14:55:01 +0000 (16:55 +0200)]
v4l2: don't extract data from caps twice
gst_video_info_from_caps() always extract width, height, interlace mode and
framerate now. It is no longer necessary to do it again for encoded
formats.
https://bugzilla.gnome.org/show_bug.cgi?id=703399
Andoni Morales Alastruey [Thu, 20 Jun 2013 12:41:48 +0000 (09:41 -0300)]
souphttpsrc: also consider stop positions in seeks
Use seek stop position as range end for requests
https://bugzilla.gnome.org/show_bug.cgi?id=702206
Thiago Santos [Wed, 19 Jun 2013 17:06:40 +0000 (14:06 -0300)]
souphttpsrc: allow seeks in ready
On is_seekable, check if the server's headers have already been
received. If not, do a HEAD request to get them before responding
to basesrc.
https://bugzilla.gnome.org/show_bug.cgi?id=702206
Wim Taymans [Mon, 1 Jul 2013 15:28:55 +0000 (17:28 +0200)]
rtspsrc: add signal to notify of the SDP
This way, the app can look and modify the SDP.
Kishore Arepalli [Fri, 21 Jun 2013 16:10:28 +0000 (18:10 +0200)]
gdkpixbufoverlay: Allow negative offsets to specify offset from bottom/right
https://bugzilla.gnome.org/show_bug.cgi?id=702826
Matej Knopp [Sun, 30 Jun 2013 19:01:20 +0000 (21:01 +0200)]
qtdemux: compute framerate from average sample duration
https://bugzilla.gnome.org/show_bug.cgi?id=703350
Alban Browaeys [Tue, 25 Jun 2013 19:16:38 +0000 (21:16 +0200)]
flvdemux: Add flvversion 1 to the flash-video caps
This allows using avdec_flv which requires this field to be
present in the caps. FLV only supports flash-video version 1
right now.
https://bugzilla.gnome.org/show_bug.cgi?id=703076
Sebastian Dröge [Mon, 1 Jul 2013 09:37:00 +0000 (11:37 +0200)]
deinterleave: Don't hold object lock while sending events downstream
Based on a patch by Kishore Arepalli <kishore.arepalli@gmail.com>
https://bugzilla.gnome.org/show_bug.cgi?id=703114
Sebastian Dröge [Mon, 1 Jul 2013 08:59:07 +0000 (10:59 +0200)]
matroskademux: Add MPEG4 video profile/level to the caps
Sebastian Dröge [Mon, 1 Jul 2013 08:56:28 +0000 (10:56 +0200)]
matroskademux: Add AAC profile/level to the caps
https://bugzilla.gnome.org/show_bug.cgi?id=703312
Wim Taymans [Fri, 28 Jun 2013 13:21:56 +0000 (15:21 +0200)]
vorbispay: add support for config-interval
Align code with the theora payloader and add support for the config-interval to
periodically send out the config headers.
Wim Taymans [Fri, 28 Jun 2013 13:21:12 +0000 (15:21 +0200)]
theorapay: small cleanups
Wim Taymans [Fri, 28 Jun 2013 10:08:19 +0000 (12:08 +0200)]
theorapay: handle streamheaders as well
Wim Taymans [Fri, 28 Jun 2013 10:06:21 +0000 (12:06 +0200)]
vorbispay: always collect headers on data
When we see a data packet, always check if we need to collect any previous
headers.
Wim Taymans [Fri, 28 Jun 2013 09:43:17 +0000 (11:43 +0200)]
vorbispay: handle streamheader as well
Take config strings from the streamheader when we can
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=664312
David Svensson Fors [Thu, 27 Jun 2013 05:40:29 +0000 (07:40 +0200)]
rtph264pay: avoid double buffer unmap on error
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=703171
Wim Taymans [Thu, 27 Jun 2013 15:02:14 +0000 (17:02 +0200)]
rtspsrc: reset-sync before play
Call reset-sync on the rtpbin before we go to playing. This makes us require SR
packets for all streams again before we attempt to sync them. If we don't reset,
it might be that we combine SR packets from before and after the PAUSE/PLAYING
state change and end up with huge bogus offsets.
Wim Taymans [Thu, 27 Jun 2013 14:23:20 +0000 (16:23 +0200)]
jitterbuffer: improve sync on first packets
Don't throw away the first RTCP packet if it arrives before the first
RTP packet but remember and use it to signal sync once we get the
RTP packet.
See https://bugzilla.gnome.org/show_bug.cgi?id=691400
Wim Taymans [Thu, 27 Jun 2013 14:15:45 +0000 (16:15 +0200)]
jitterbuffer: only signal loop when active
Only signal the loop function when it is active.
Wim Taymans [Thu, 27 Jun 2013 14:13:37 +0000 (16:13 +0200)]
jitterbuffer: signal timestamp discont
We can now use the RESYNC buffer flag to mark a timestamp discont when we update
the ts-offset property.
Wim Taymans [Wed, 26 Jun 2013 18:49:41 +0000 (20:49 +0200)]
jpegpay: turn some errors into warnings
Turn some errors into warnings, we can continue processing so this should
not be fatal.
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=657079
Wim Taymans [Wed, 26 Jun 2013 12:58:53 +0000 (14:58 +0200)]
rtspsrc: avoid some flushes
Wim Taymans [Wed, 26 Jun 2013 12:41:00 +0000 (14:41 +0200)]
rtspsrc: handle data message when waiting for reply
When we are waiting for a server reply, handle data messages instead of
ignoring them.
Wim Taymans [Wed, 26 Jun 2013 12:27:34 +0000 (14:27 +0200)]
rtspsrc: handle data messages in separate method
Refactor and make a method to handle a data message.
Wim Taymans [Tue, 25 Jun 2013 18:36:18 +0000 (20:36 +0200)]
rtspsrc: add some more docs to handle-request signal
See https://bugzilla.gnome.org/show_bug.cgi?id=702705
Youness Alaoui [Mon, 10 Jun 2013 21:20:30 +0000 (17:20 -0400)]
Send a clock_provide message on the bus when we get a netclock
Youness Alaoui [Mon, 10 Jun 2013 21:20:14 +0000 (17:20 -0400)]
rtspsrc: Expose use-pipeline-clock property
Wim Taymans [Mon, 24 Jun 2013 15:11:35 +0000 (17:11 +0200)]
udpsink: bind to the given interface
Actually call BINDTODEVICE to bind to the interface as given by the
property.
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=702819
Sebastian Dröge [Sat, 22 Jun 2013 08:59:17 +0000 (10:59 +0200)]
vp8dec: Error out gracefully if we get an unsupported color format
In theory we can only get I420 though, just to be on the safe side.
Sebastian Dröge [Sat, 22 Jun 2013 08:57:41 +0000 (10:57 +0200)]
vp9: Add support for YV12, Y42B and Y444 color formats
The encoder does not work with Y42B and Y444 yet it seems.
Sebastian Dröge [Sat, 22 Jun 2013 08:26:18 +0000 (10:26 +0200)]
vp9dec: Update default postproc settings from vp9_dx_iface.c
Sebastian Dröge [Fri, 21 Jun 2013 11:11:32 +0000 (13:11 +0200)]
matroska: Add initial VP9 support
Sebastian Dröge [Fri, 21 Jun 2013 11:07:30 +0000 (13:07 +0200)]
vpx: Add initial, experimental VP9 support
Youness Alaoui [Fri, 21 Jun 2013 08:32:30 +0000 (10:32 +0200)]
rtsp: go back into the loop after doing pause
After we do a pause request, go back to loop mode so that we can listen
for server messages again.
See https://bugzilla.gnome.org/show_bug.cgi?id=702705
Olivier Crête [Fri, 21 Jun 2013 03:16:17 +0000 (23:16 -0400)]
rtpptdemux: Wait after the caps to forward the other events
First forward the stream-start, then the caps, then the rest
Tim-Philipp Müller [Thu, 20 Jun 2013 23:42:02 +0000 (00:42 +0100)]
ximagesrc: clear dts on buffer acquired from pool
When setting timestamps on outgoing buffers, clear the
dts explicitly, otherwise it may end up being set to a
bogus value from last time it was used. Avoids every
second or so buffer's dts being set to 0. Not that it
should matter for raw video.
Wim Taymans [Thu, 20 Jun 2013 13:35:11 +0000 (15:35 +0200)]
v4l2: don't redefine the PERFORMANCE debug variable
It is already defined in core.
fixes https://bugzilla.gnome.org/show_bug.cgi?id=702732
Wim Taymans [Thu, 20 Jun 2013 12:43:47 +0000 (14:43 +0200)]
rtspsrc: fix race in state change to paused
When we go to paused, we first flush the connection and then send the pause
command. As a result of the flushing, the scheduled paused command can get
lost. Wait until the connection is completely flushed and the rtsp task is
waiting before issuing the paused or playing request.
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=702705
Wim Taymans [Thu, 20 Jun 2013 09:31:22 +0000 (11:31 +0200)]
qtdemux: handle SEGMENT query
Sjoerd Simons [Wed, 19 Jun 2013 10:37:31 +0000 (12:37 +0200)]
v4l2: Optimize negotiation by removing the query filter
As cameras tend to have a quite specific set of capabilities (specific
framerates for each resolution), getting the peer caps filtered by our
probed caps can cause a big increase in the caps size which slows down
things quire a bit.
As for negotiation v4l2 iterates through the caps of the peer to find the
first intersection with the probed caps, getting the fully expanded
intersection of capabilities is not useful.
Using the same testcase as for bug #702632, adding this patch on top of
the patches suggested there speeds up getting the inital frame from
around ~14-15 seconds to around ~3-4 seconds.
https://bugzilla.gnome.org/show_bug.cgi?id=702638
Kishore Arepalli [Wed, 19 Jun 2013 08:30:56 +0000 (10:30 +0200)]
avidemux: duration query returns zero for DV video in avi
https://bugzilla.gnome.org/show_bug.cgi?id=702625
Sebastian Dröge [Wed, 19 Jun 2013 09:06:37 +0000 (11:06 +0200)]
qtdemux: Disable usage of allocation queries
This can only reliably work if demuxers have a
separate streaming thread per srcpad. This should be
done in a demuxer base class, which integrates parts
of multiqueue
https://bugzilla.gnome.org/show_bug.cgi?id=701856