Input: xpad - support some quirky Xbox One pads

[ Upstream commit 81093c9848a781b85163d06de92ef8f84528cf6a ]

There are several quirky Xbox One pads that depend on initialization
packets that the Microsoft pads don't require. To deal with these,
I've added a mechanism for issuing device-specific initialization
packets using a VID/PID-based quirks list.

For the initial set of init quirks, I have added quirk handling from
Valve's Steam Link xpad driver[0] and the 360Controller project[1] for
macOS to enable some new pads to work properly.

This should enable full functionality on the following quirky pads:
0x0e6f:0x0165 - Titanfall 2 gamepad (previously fully non-functional)
0x0f0d:0x0067 - Hori Horipad (analog sticks previously non-functional)
0x24c6:0x541a - PowerA Xbox One pad (previously fully non-functional)
0x24c6:0x542a - PowerA Xbox One pad (previously fully non-functional)
0x24c6:0x543a - PowerA Xbox One pad (previously fully non-functional)

[0]: https://github.com/ValveSoftware/steamlink-sdk/blob/master/kernel/drivers/input/joystick/xpad.c
[1]: https://github.com/360Controller/360Controller

Signed-off-by: Cameron Gutman <aicommander@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Input: xpad - restore LED state after device resume

[ Upstream commit a1fbf5bbef025b4844162b3b8868888003a7ee9c ]

Set the LED_CORE_SUSPENDRESUME flag on our LED device so the
LED state will be automatically restored by LED core on resume.

Since Xbox One pads stop flashing only when reinitialized, we'll
send them the initialization packet so they calm down too.

Signed-off-by: Cameron Gutman <aicommander@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Input: xpad - fix stuck mode button on Xbox One S pad

[ Upstream commit 57b8443d3e5bd046a519ff714ca31c64c7f04309 ]

The Xbox One S requires an ack to its mode button report, otherwise it
continuously retransmits the report. This makes the mode button appear to
be stuck down after it is pressed for the first time.

Signed-off-by: Cameron Gutman <aicommander@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Input: xpad - don't depend on endpoint order

[ Upstream commit c01b5e7464f0cf20936d7467c7528163c4e2782d ]

The order of endpoints is well defined on official Xbox pads, but
we have found at least one 3rd-party pad that doesn't follow the
standard ("Titanfall 2 Xbox One controller" 0e6f:0165).

Fortunately, we get lucky with this specific pad because it uses
endpoint addresses that differ only by direction. We know that
there are other pads out where this is not true, so let's go
ahead and fix this.

Signed-off-by: Cameron Gutman <aicommander@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Input: xpad - simplify error condition in init_output

[ Upstream commit a8c34e27fb1ece928ec728bfe596aa6ca0b1928a ]

Replace first goto with simple returns as we really are just returning
one error code.

Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Input: xpad - move reporting xbox one home button to common function

[ Upstream commit 4f88476c75429ba9ab71c428b4cd2f67575bc9c1 ]

xbox one was the only device that has a *_process_buttons routine.

Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Input: xpad - correctly sort vendor id's

[ Upstream commit c02fc1d9e5d9f093296e43e13ec7f35f140784bd ]

Signed-off-by: Daniel Tobias <dan.g.tob@gmail.com>
Signed-off-by: Pavel Rojtberg <rojtberg@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Input: xpad - fix Xbox One rumble stopping after 2.5 secs

[ Upstream commit ae3b4469dbcd3b842a9fd20940946e4d092d8731 ]

Unlike previous Xbox pads, the Xbox One pad doesn't have "sticky" rumble
packets. The duration is encoded into the command and expiration is handled
by the pad firmware.

ff-memless needs pseudo-sticky behavior for rumble effects to behave
properly for long duration effects. We already specify the maximum rumble
on duration in the command packets, but it's still only good for about 2.5
seconds of rumble. This is easily reproducible running fftest's sine
vibration test.

It turns out there's a repeat count encoded in the rumble command. We can
abuse that to get the pseudo-sticky behavior needed for rumble to behave as
expected for effects with long duration.

By my math, this change should allow a single ff_effect to rumble for 10
minutes straight, which should be more than enough for most needs.

Signed-off-by: Cameron Gutman <aicommander@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Input: xpad - add product ID for Xbox One S pad

[ Upstream commit 599b8c09d974d6e4d85a8f7bc8ed7442977866a8 ]

This is the new gamepad that ships with the Xbox One S which
includes Bluetooth functionality.

Signed-off-by: Cameron Gutman <aicommander@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ath10k: fix kernel panic due to race in accessing arvif list

commit ebaa4b1620bf69f2bc43cb45ea85fbafdaec23c3 upstream.

arvifs list is traversed within data_lock spin_lock in tasklet
context to fill channel information from the corresponding vif.
This means any access to arvifs list for add/del operations
should also be protected with the same spin_lock to avoid the
race. Fix this by performing list add/del on arvfis within the
data_lock. This could fix kernel panic something like the below.

 LR is at ath10k_htt_rx_pktlog_completion_handler+0x100/0xb6c [ath10k_core]
 PC is at ath10k_htt_rx_pktlog_completion_handler+0x1c0/0xb6c [ath10k_core]
 Internal error: Oops: 17 [#1] PREEMPT SMP ARM
 [<bf4857f4>] (ath10k_htt_rx_pktlog_completion_handler+0x2f4/0xb6c [ath10k_core])
 [<bf487540>] (ath10k_htt_txrx_compl_task+0x8b4/0x1188 [ath10k_core])
 [<c00312d4>] (tasklet_action+0x8c/0xec)
 [<c00309a8>] (__do_softirq+0xdc/0x208)
 [<c0030d6c>] (irq_exit+0x84/0xe0)
 [<c005db04>] (__handle_domain_irq+0x80/0xa0)
 [<c00085c4>] (gic_handle_irq+0x38/0x5c)
 [<c0009640>] (__irq_svc+0x40/0x74)

(gdb) list *(ath10k_htt_rx_pktlog_completion_handler+0x1c0)
0x136c0 is in ath10k_htt_rx_h_channel (drivers/net/wireless/ath/ath10k/htt_rx.c:769)
764 struct cfg80211_chan_def def;
765
766 lockdep_assert_held(&ar->data_lock);
767
768 list_for_each_entry(arvif, &ar->arvifs, list) {
769 if (arvif->vdev_id == vdev_id &&
770     ath10k_mac_vif_chan(arvif->vif, &def) == 0)
771 return def.chan;
772 }
773

Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qti.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: remove no-op -p linker flag

(commit 1a381d4a0a9a0f999a13faaba22bf6b3fc80dcb9 upstream)

Linking the ARM64 defconfig kernel with LLVM lld fails with the error:

  ld.lld: error: unknown argument: -p
  Makefile:1015: recipe for target 'vmlinux' failed

Without this flag, the ARM64 defconfig kernel successfully links with
lld and boots on Dragonboard 410c.

After digging through binutils source and changelogs, it turns out that
-p is only relevant to ancient binutils installations targeting 32-bit
ARM.  binutils accepts -p for AArch64 too, but it's always been
undocumented and silently ignored.  A comment in
ld/emultempl/aarch64elf.em explains that it's "Only here for backwards
compatibility".

Since this flag is a no-op on ARM64, we can safely drop it.

Acked-by: Will Deacon <will.deacon@arm.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Greg Hackmann <ghackmann@google.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: bcmgenet: fix OF child-node lookup

[ Upstream commit d397dbe606120a1ea1b11b0020c3f7a3852da5ac ]

Use the new of_get_compatible_child() helper to lookup the mdio child
node instead of using of_find_compatible_node(), which searches the
entire tree from a given start node and thus can return an unrelated
(i.e. non-child) node.

This also addresses a potential use-after-free (e.g. after probe
deferral) as the tree-wide helper drops a reference to its first
argument (i.e. the node of the device being probed).

Fixes: aa09677cba42 ("net: bcmgenet: add MDIO routines")
Cc: stable <stable@vger.kernel.org> # 3.15
Cc: David S. Miller <davem@davemloft.net>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

NFC: nfcmrvl_uart: fix OF child-node lookup

[ Upstream commit 5bf59773aaf36dd62117dc83d50e1bbf9ef432da ]

Use the new of_get_compatible_child() helper to lookup the nfc child
node instead of using of_find_compatible_node(), which searches the
entire tree from a given start node and thus can return an unrelated
(i.e. non-child) node.

This also addresses a potential use-after-free (e.g. after probe
deferral) as the tree-wide helper drops a reference to its first
argument (i.e. the parent node).

Fixes: e097dc624f78 ("NFC: nfcmrvl: add UART driver")
Fixes: d8e018c0b321 ("NFC: nfcmrvl: update device tree bindings for Marvell NFC")
Cc: stable <stable@vger.kernel.org> # 4.2
Cc: Vincent Cuissard <cuissard@marvell.com>
Cc: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

of: add helper to lookup compatible child node

[ Upstream commit 36156f9241cb0f9e37d998052873ca7501ad4b36 ]

Add of_get_compatible_child() helper that can be used to lookup
compatible child nodes.

Several drivers currently use of_find_compatible_node() to lookup child
nodes while failing to notice that the of_find_ functions search the
entire tree depth-first (from a given start node) and therefore can
match unrelated nodes. The fact that these functions also drop a
reference to the node they start searching from (e.g. the parent node)
is typically also overlooked, something which can lead to use-after-free
bugs.

Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tmpfs: make lseek(SEEK_DATA/SEK_HOLE) return ENXIO with a negative offset

[ Upstream commit 1a413646931cb14442065cfc17561e50f5b5bb44 ]

Other filesystems such as ext4, f2fs and ubifs all return ENXIO when
lseek (SEEK_DATA or SEEK_HOLE) requests a negative offset.

man 2 lseek says

:      EINVAL whence  is  not  valid.   Or: the resulting file offset would be
:             negative, or beyond the end of a seekable device.
:
:      ENXIO  whence is SEEK_DATA or SEEK_HOLE, and the file offset is  beyond
:             the end of the file.

Make tmpfs return ENXIO under these circumstances as well.  After this,
tmpfs also passes xfstests's generic/448.

[akpm@linux-foundation.org: rewrite changelog]
Link: http://lkml.kernel.org/r/1540434176-14349-1-git-send-email-yuyufen@huawei.com
Signed-off-by: Yufen Yu <yuyufen@huawei.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Hugh Dickins <hughd@google.com>
Cc: William Kucharski <william.kucharski@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

efi/arm: Revert deferred unmap of early memmap mapping

[ Upstream commit 33412b8673135b18ea42beb7f5117ed0091798b6 ]

Commit:

  3ea86495aef2 ("efi/arm: preserve early mapping of UEFI memory map longer for BGRT")

deferred the unmap of the early mapping of the UEFI memory map to
accommodate the ACPI BGRT code, which looks up the memory type that
backs the BGRT table to validate it against the requirements of the UEFI spec.

Unfortunately, this causes problems on ARM, which does not permit
early mappings to persist after paging_init() is called, resulting
in a WARN() splat. Since we don't support the BGRT table on ARM anway,
let's revert ARM to the old behaviour, which is to take down the
early mapping at the end of efi_init().

Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Fixes: 3ea86495aef2 ("efi/arm: preserve early mapping of UEFI memory ...")
Link: http://lkml.kernel.org/r/20181114175544.12860-3-ard.biesheuvel@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/numa: Suppress "VPHN is not supported" messages

[ Upstream commit 437ccdc8ce629470babdda1a7086e2f477048cbd ]

When VPHN function is not supported and during cpu hotplug event,
kernel prints message 'VPHN function not supported. Disabling
polling...'. Currently it prints on every hotplug event, it floods
dmesg when a KVM guest tries to hotplug huge number of vcpus, let's
just print once and suppress further kernel prints.

Signed-off-by: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

kdb: Use strscpy with destination buffer size

[ Upstream commit c2b94c72d93d0929f48157eef128c4f9d2e603ce ]

gcc 8.1.0 warns with:

kernel/debug/kdb/kdb_support.c: In function ‘kallsyms_symbol_next’:
kernel/debug/kdb/kdb_support.c:239:4: warning: ‘strncpy’ specified bound depends on the length of the source argument [-Wstringop-overflow=]
     strncpy(prefix_name, name, strlen(name)+1);
     ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
kernel/debug/kdb/kdb_support.c:239:31: note: length computed here

Use strscpy() with the destination buffer size, and use ellipses when
displaying truncated symbols.

v2: Use strscpy()

Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Cc: Jonathan Toppins <jtoppins@redhat.com>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Cc: kgdb-bugreport@lists.sourceforge.net
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

SUNRPC: Fix a bogus get/put in generic_key_to_expire()

[ Upstream commit e3d5e573a54dabdc0f9f3cb039d799323372b251 ]

Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf/x86/intel/uncore: Add more IMC PCI IDs for KabyLake and CoffeeLake CPUs

[ Upstream commit c10a8de0d32e95b0b8c7c17b6dc09baea5a5a899 ]

KabyLake and CoffeeLake CPUs have the same client uncore events as SkyLake.

Add the PCI IDs for the KabyLake Y, U, S processor lines and CoffeeLake U,
H, S processor lines.

Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: http://lkml.kernel.org/r/20181019170419.378-1-kan.liang@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/io: Fix the IO workarounds code to work with Radix

[ Upstream commit 43c6494fa1499912c8177e71450c0279041152a6 ]

Back in 2006 Ben added some workarounds for a misbehaviour in the
Spider IO bridge used on early Cell machines, see commit
014da7ff47b5 ("[POWERPC] Cell "Spider" MMIO workarounds"). Later these
were made to be generic, ie. not tied specifically to Spider.

The code stashes a token in the high bits (59-48) of virtual addresses
used for IO (eg. returned from ioremap()). This works fine when using
the Hash MMU, but when we're using the Radix MMU the bits used for the
token overlap with some of the bits of the virtual address.

This is because the maximum virtual address is larger with Radix, up
to c00fffffffffffff, and in fact we use that high part of the address
range for ioremap(), see RADIX_KERN_IO_START.

As it happens the bits that are used overlap with the bits that
differentiate an IO address vs a linear map address. If the resulting
address lies outside the linear mapping we will crash (see below), if
not we just corrupt memory.

  virtio-pci 0000:00:00.0: Using 64-bit direct DMA at offset 800000000000000
  Unable to handle kernel paging request for data at address 0xc000000080000014
  ...
  CFAR: c000000000626b98 DAR: c000000080000014 DSISR: 42000000 IRQMASK: 0
  GPR00: c0000000006c54fc c00000003e523378 c0000000016de600 0000000000000000
  GPR04: c00c000080000014 0000000000000007 0fffffff000affff 0000000000000030
         ^^^^
  ...
  NIP [c000000000626c5c] .iowrite8+0xec/0x100
  LR [c0000000006c992c] .vp_reset+0x2c/0x90
  Call Trace:
    .pci_bus_read_config_dword+0xc4/0x120 (unreliable)
    .register_virtio_device+0x13c/0x1c0
    .virtio_pci_probe+0x148/0x1f0
    .local_pci_probe+0x68/0x140
    .pci_device_probe+0x164/0x220
    .really_probe+0x274/0x3b0
    .driver_probe_device+0x80/0x170
    .__driver_attach+0x14c/0x150
    .bus_for_each_dev+0xb8/0x130
    .driver_attach+0x34/0x50
    .bus_add_driver+0x178/0x2f0
    .driver_register+0x90/0x1a0
    .__pci_register_driver+0x6c/0x90
    .virtio_pci_driver_init+0x2c/0x40
    .do_one_initcall+0x64/0x280
    .kernel_init_freeable+0x36c/0x474
    .kernel_init+0x24/0x160
    .ret_from_kernel_thread+0x58/0x7c

This hasn't been a problem because CONFIG_PPC_IO_WORKAROUNDS which
enables this code is usually not enabled. It is only enabled when it's
selected by PPC_CELL_NATIVE which is only selected by
PPC_IBM_CELL_BLADE and that in turn depends on BIG_ENDIAN. So in order
to hit the bug you need to build a big endian kernel, with IBM Cell
Blade support enabled, as well as Radix MMU support, and then boot
that on Power9 using Radix MMU.

Still we can fix the bug, so let's do that. We simply use fewer bits
for the token, taking the union of the restrictions on the address
from both Hash and Radix, we end up with 8 bits we can use for the
token. The only user of the token is iowa_mem_find_bus() which only
supports 8 token values, so 8 bits is plenty for that.

Fixes: 566ca99af026 ("powerpc/mm/radix: Add dummy radix_enabled()")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

floppy: fix race condition in __floppy_read_block_0()

[ Upstream commit de7b75d82f70c5469675b99ad632983c50b6f7e7 ]

LKP recently reported a hang at bootup in the floppy code:

[  245.678853] INFO: task mount:580 blocked for more than 120 seconds.
[  245.679906]       Tainted: G                T 4.19.0-rc6-00172-ga9f38e1 #1
[  245.680959] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[  245.682181] mount           D 6372   580      1 0x00000004
[  245.683023] Call Trace:
[  245.683425]  __schedule+0x2df/0x570
[  245.683975]  schedule+0x2d/0x80
[  245.684476]  schedule_timeout+0x19d/0x330
[  245.685090]  ? wait_for_common+0xa5/0x170
[  245.685735]  wait_for_common+0xac/0x170
[  245.686339]  ? do_sched_yield+0x90/0x90
[  245.686935]  wait_for_completion+0x12/0x20
[  245.687571]  __floppy_read_block_0+0xfb/0x150
[  245.688244]  ? floppy_resume+0x40/0x40
[  245.688844]  floppy_revalidate+0x20f/0x240
[  245.689486]  check_disk_change+0x43/0x60
[  245.690087]  floppy_open+0x1ea/0x360
[  245.690653]  __blkdev_get+0xb4/0x4d0
[  245.691212]  ? blkdev_get+0x1db/0x370
[  245.691777]  blkdev_get+0x1f3/0x370
[  245.692351]  ? path_put+0x15/0x20
[  245.692871]  ? lookup_bdev+0x4b/0x90
[  245.693539]  blkdev_get_by_path+0x3d/0x80
[  245.694165]  mount_bdev+0x2a/0x190
[  245.694695]  squashfs_mount+0x10/0x20
[  245.695271]  ? squashfs_alloc_inode+0x30/0x30
[  245.695960]  mount_fs+0xf/0x90
[  245.696451]  vfs_kern_mount+0x43/0x130
[  245.697036]  do_mount+0x187/0xc40
[  245.697563]  ? memdup_user+0x28/0x50
[  245.698124]  ksys_mount+0x60/0xc0
[  245.698639]  sys_mount+0x19/0x20
[  245.699167]  do_int80_syscall_32+0x61/0x130
[  245.699813]  entry_INT80_32+0xc7/0xc7

showing that we never complete that read request. The reason is that
the completion setup is racy - it initializes the completion event
AFTER submitting the IO, which means that the IO could complete
before/during the init. If it does, we are passing garbage to
complete() and we may sleep forever waiting for the event to
occur.

Fixes: 7b7b68bba5ef ("floppy: bail out in open() if drive is not responding to block0 read")
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

rtc: pcf2127: fix a kmemleak caused in pcf2127_i2c_gather_write

[ Upstream commit 9bde0afb7a906f1dabdba37162551565740b862d ]

pcf2127_i2c_gather_write() allocates memory as local variable
for i2c_master_send(), after finishing the master transfer,
the allocated memory should be freed. The kmemleak is reported:

unreferenced object 0xffff80231e7dba80 (size 64):
  comm "hwclock", pid 27762, jiffies 4296880075 (age 356.944s)
  hex dump (first 32 bytes):
    03 00 12 03 19 02 11 13 00 80 98 18 00 00 ff ff ................
    00 50 00 00 00 00 00 00 02 00 00 00 00 00 00 00 .P..............
  backtrace:
    [<ffff000008221398>] create_object+0xf8/0x278
    [<ffff000008a96264>] kmemleak_alloc+0x74/0xa0
    [<ffff00000821070c>] __kmalloc+0x1ac/0x348
    [<ffff0000087ed1dc>] pcf2127_i2c_gather_write+0x54/0xf8
    [<ffff0000085fd9d4>] _regmap_raw_write+0x464/0x850
    [<ffff0000085fe3f4>] regmap_bulk_write+0x1a4/0x348
    [<ffff0000087ed32c>] pcf2127_rtc_set_time+0xac/0xe8
    [<ffff0000087eaad8>] rtc_set_time+0x80/0x138
    [<ffff0000087ebfb0>] rtc_dev_ioctl+0x398/0x610
    [<ffff00000823f2c0>] do_vfs_ioctl+0xb0/0x848
    [<ffff00000823fae4>] SyS_ioctl+0x8c/0xa8
    [<ffff000008083ac0>] el0_svc_naked+0x34/0x38
    [<ffffffffffffffff>] 0xffffffffffffffff

Signed-off-by: Xulin Sun <xulin.sun@windriver.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cpufreq: imx6q: add return value check for voltage scale

[ Upstream commit 6ef28a04d1ccf718eee069b72132ce4aa1e52ab9 ]

Add return value check for voltage scale when ARM clock
rate change fail.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

KVM: PPC: Move and undef TRACE_INCLUDE_PATH/FILE

[ Upstream commit 28c5bcf74fa07c25d5bd118d1271920f51ce2a98 ]

TRACE_INCLUDE_PATH and TRACE_INCLUDE_FILE are used by
<trace/define_trace.h>, so like that #include, they should
be outside #ifdef protection.

They also need to be #undefed before defining, in case multiple trace
headers are included by the same C file.  This became the case on
book3e after commit cf4a6085151a ("powerpc/mm: Add missing tracepoint for
tlbie"), leading to the following build error:

   CC      arch/powerpc/kvm/powerpc.o
In file included from arch/powerpc/kvm/powerpc.c:51:0:
arch/powerpc/kvm/trace.h:9:0: error: "TRACE_INCLUDE_PATH" redefined
[-Werror]
  #define TRACE_INCLUDE_PATH .
  ^
In file included from arch/powerpc/kvm/../mm/mmu_decl.h:25:0,
                  from arch/powerpc/kvm/powerpc.c:48:
./arch/powerpc/include/asm/trace.h:224:0: note: this is the location of
the previous definition
  #define TRACE_INCLUDE_PATH asm
  ^
cc1: all warnings being treated as errors

Reported-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Signed-off-by: Scott Wood <oss@buserror.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pinctrl: meson: fix pinconf bias disable

[ Upstream commit e39f9dd8206ad66992ac0e6218ef1ba746f2cce9 ]

If a bias is enabled on a pin of an Amlogic SoC, calling .pin_config_set()
with PIN_CONFIG_BIAS_DISABLE will not disable the bias. Instead it will
force a pull-down bias on the pin.

Instead of the pull type register bank, the driver should access the pull
enable register bank.

Fixes: 6ac730951104 ("pinctrl: add driver for Amlogic Meson SoCs")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: xhci: Prevent bus suspend if a port connect change or polling state is detected

commit 2f31a67f01a8beb22cae754c53522cb61a005750 upstream.

USB3 roothub might autosuspend before a plugged USB3 device is detected,
causing USB3 device enumeration failure.

USB3 devices don't show up as connected and enabled until USB3 link trainig
completes. On a fast booting platform with a slow USB3 link training the
link might reach the connected enabled state just as the bus is suspending.

If this device is discovered first time by the xhci_bus_suspend() routine
it will be put to U3 suspended state like the other ports which failed to
suspend earlier.

The hub thread will notice the connect change and resume the bus,
moving the port back to U0

This U0 -> U3 -> U0 transition right after being connected seems to be
too much for some devices, causing them to first go to SS.Inactive state,
and finally end up stuck in a polling state with reset asserted

Fix this by failing the bus suspend if a port has a connect change or is
in a polling state in xhci_bus_suspend().

Don't do any port changes until all ports are checked, buffer all port
changes and only write them in the end if suspend can proceed

Cc: stable@vger.kernel.org
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

IB/hfi1: Eliminate races in the SDMA send error path

commit a0e0cb82804a6a21d9067022c2dfdf80d11da429 upstream.

pq_update() can only be called in two places: from the completion
function when the complete (npkts) sequence of packets has been
submitted and processed, or from setup function if a subset of the
packets were submitted (i.e. the error path).

Currently both paths can call pq_update() if an error occurrs.  This
race will cause the n_req value to go negative, hanging file_close(),
or cause a crash by freeing the txlist more than once.

Several variables are used to determine SDMA send state.  Most of
these are unnecessary, and have code inspectible races between the
setup function and the completion function, in both the send path and
the error path.

The request 'status' value can be set by the setup or by the
completion function.  This is code inspectibly racy.  Since the status
is not needed in the completion code or by the caller it has been
removed.

The request 'done' value races between usage by the setup and the
completion function.  The completion function does not need this.
When the number of processed packets matches npkts, it is done.

The 'has_error' value races between usage of the setup and the
completion function.  This can cause incorrect error handling and leave
the n_req in an incorrect value (i.e. negative).

Simplify the code by removing all of the unneeded state checks and
variables.

Clean up iovs node when it is freed.

Eliminate race conditions in the error path:

If all packets are submitted, the completion handler will set the
completion status correctly (ok or aborted).

If all packets are not submitted, the caller must wait until the
submitted packets have completed, and then set the completion status.

These two change eliminate the race condition in the error path.

Reviewed-by: Mitko Haralanov <mitko.haralanov@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

IB/core: Fix for core panic

commit e6f9bc34d3779cb7b6a337afed5de8be3f0fab77 upstream.

Build with the latest patches resulted in panic:
11384.486289] BUG: unable to handle kernel NULL pointer dereference at
         (null)
[11384.486293] IP:           (null)
[11384.486295] PGD 0
[11384.486295] P4D 0
[11384.486296]
[11384.486299] Oops: 0010 [#1] SMP
......... snip ......
[11384.486401] CPU: 0 PID: 968 Comm: kworker/0:1H Tainted: G        W  O
    4.13.0-a-stream-20170825 #1
[11384.486402] Hardware name: Intel Corporation S2600WT2R/S2600WT2R,
BIOS SE5C610.86B.01.01.0014.121820151719 12/18/2015
[11384.486418] Workqueue: ib-comp-wq ib_cq_poll_work [ib_core]
[11384.486419] task: ffff880850579680 task.stack: ffffc90007fec000
[11384.486420] RIP: 0010:          (null)
[11384.486420] RSP: 0018:ffffc90007fef970 EFLAGS: 00010206
[11384.486421] RAX: ffff88084cfe8000 RBX: ffff88084dce4000 RCX:
ffffc90007fef978
[11384.486422] RDX: 0000000000000000 RSI: 0000000000000001 RDI:
ffff88084cfe8000
[11384.486422] RBP: ffffc90007fefab0 R08: 0000000000000000 R09:
ffff88084dce4080
[11384.486423] R10: ffffffffa02d7f60 R11: 0000000000000000 R12:
ffff88105af65a00
[11384.486423] R13: ffff88084dce4000 R14: 000000000000c000 R15:
000000000000c000
[11384.486424] FS:  0000000000000000(0000) GS:ffff88085f400000(0000)
knlGS:0000000000000000
[11384.486425] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[11384.486425] CR2: 0000000000000000 CR3: 0000000001c09000 CR4:
00000000001406f0
[11384.486426] Call Trace:
[11384.486431]  ? is_valid_mcast_lid.isra.21+0xfb/0x110 [ib_core]
[11384.486436]  ib_attach_mcast+0x6f/0xa0 [ib_core]
[11384.486441]  ipoib_mcast_attach+0x81/0x190 [ib_ipoib]
[11384.486443]  ipoib_mcast_join_complete+0x354/0xb40 [ib_ipoib]
[11384.486448]  mcast_work_handler+0x330/0x6c0 [ib_core]
[11384.486452]  join_handler+0x101/0x220 [ib_core]
[11384.486455]  ib_sa_mcmember_rec_callback+0x54/0x80 [ib_core]
[11384.486459]  recv_handler+0x3a/0x60 [ib_core]
[11384.486462]  ib_mad_recv_done+0x423/0x9b0 [ib_core]
[11384.486466]  __ib_process_cq+0x5d/0xb0 [ib_core]
[11384.486469]  ib_cq_poll_work+0x20/0x60 [ib_core]
[11384.486472]  process_one_work+0x149/0x360
[11384.486474]  worker_thread+0x4d/0x3c0
[11384.486487]  kthread+0x109/0x140
[11384.486488]  ? rescuer_thread+0x380/0x380
[11384.486489]  ? kthread_park+0x60/0x60
[11384.486490]  ? kthread_park+0x60/0x60
[11384.486493]  ret_from_fork+0x25/0x30
[11384.486493] Code:  Bad RIP value.
[11384.486493] Code:  Bad RIP value.
[11384.486496] RIP:           (null) RSP: ffffc90007fef970
[11384.486497] CR2: 0000000000000000
[11384.486531] ---[ end trace b1acec6fb4ff6e75 ]---
[11384.532133] Kernel panic - not syncing: Fatal exception
[11384.536541] Kernel Offset: disabled
[11384.969491] ---[ end Kernel panic - not syncing: Fatal exception
[11384.976875] sched: Unexpected reschedule of offline CPU#1!
[11384.983646] ------------[ cut here ]------------

Rdma device driver may not have implemented (*get_link_layer)()
so it can not be called directly. Should use appropriate helper function.

Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Fixes: 523633359224 ("IB/core: Fix the validations of a multicast LID in attach or detach operations")
Cc: stable@kernel.org # 4.13
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Alex Estrin <alex.estrin@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Cc: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

can: dev: __can_get_echo_skb(): print error message, if trying to echo non existing skb

commit 7da11ba5c5066dadc2e96835a6233d56d7b7764a upstream.

Prior to echoing a successfully transmitted CAN frame (by calling
can_get_echo_skb()), CAN drivers have to put the CAN frame (by calling
can_put_echo_skb() in the transmit function). These put and get function
take an index as parameter, which is used to identify the CAN frame.

A driver calling can_get_echo_skb() with a index not pointing to a skb
is a BUG, so add an appropriate error message.

Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

can: dev: __can_get_echo_skb(): Don't crash the kernel if can_priv::echo_skb is accessed out of bounds

commit e7a6994d043a1e31d5b17706a22ce33d2a3e4cdc upstream.

If the "struct can_priv::echo_skb" is accessed out of bounds would lead
to a kernel crash. Better print a sensible warning message instead and
try to recover.

Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

can: dev: __can_get_echo_skb(): replace struct can_frame by canfd_frame to access frame length

commit 200f5c49f7a2cd694436bfc6cb0662b794c96736 upstream.

This patch replaces the use of "struct can_frame::can_dlc" by "struct
canfd_frame::len" to access the frame's length. As it is ensured that
both structures have a compatible memory layout for this member this is
no functional change. Futher, this compatibility is documented in a
comment.

Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

can: dev: can_get_echo_skb(): factor out non sending code to __can_get_echo_skb()

commit a4310fa2f24687888ce80fdb0e88583561a23700 upstream.

This patch factors out all non sending parts of can_get_echo_skb() into
a seperate function __can_get_echo_skb(), so that it can be re-used in
an upcoming patch.

Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/ast: Remove existing framebuffers before loading driver

commit 5478ad10e7850ce3d8b7056db05ddfa3c9ddad9a upstream.

If vesafb attaches to the AST device, it configures the framebuffer memory
for uncached access by default. When ast.ko later tries to attach itself to
the device, it wants to use write-combining on the framebuffer memory, but
vesefb's existing configuration for uncached access takes precedence. This
results in reduced performance.

Removing the framebuffer's configuration before loding the AST driver fixes
the problem. Other DRM drivers already contain equivalent code.

Link: https://bugzilla.opensuse.org/show_bug.cgi?id=1112963
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: <stable@vger.kernel.org>
Tested-by: Y.C. Chen <yc_chen@aspeedtech.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Tested-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/ast: fixed cursor may disappear sometimes

commit 7989b9ee8bafe5cc625381dd0c3c4586de27ca26 upstream.

Signed-off-by: Y.C. Chen <yc_chen@aspeedtech.com>
Cc: <stable@vger.kernel.org>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/ast: change resolution may cause screen blurred

commit 1a37bd823891568f8721989aed0615835632d81a upstream.

The value of pitches is not correct while calling mode_set.
The issue we found so far on following system:
- Debian8 with XFCE Desktop
- Ubuntu with KDE Desktop
- SUSE15 with KDE Desktop

Signed-off-by: Y.C. Chen <yc_chen@aspeedtech.com>
Cc: <stable@vger.kernel.org>
Tested-by: Jean Delvare <jdelvare@suse.de>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm: don't warn about large allocations for slab

commit 61448479a9f2c954cde0cfe778cb6bec5d0a748d upstream.

Slub does not call kmalloc_slab() for sizes > KMALLOC_MAX_CACHE_SIZE,
instead it falls back to kmalloc_large().

For slab KMALLOC_MAX_CACHE_SIZE == KMALLOC_MAX_SIZE and it calls
kmalloc_slab() for all allocations relying on NULL return value for
over-sized allocations.

This inconsistency leads to unwanted warnings from kmalloc_slab() for
over-sized allocations for slab.  Returning NULL for failed allocations is
the expected behavior.

Make slub and slab code consistent by checking size >
KMALLOC_MAX_CACHE_SIZE in slab before calling kmalloc_slab().

While we are here also fix the check in kmalloc_slab().  We should check
against KMALLOC_MAX_CACHE_SIZE rather than KMALLOC_MAX_SIZE.  It all kinda
worked because for slab the constants are the same, and slub always checks
the size against KMALLOC_MAX_CACHE_SIZE before kmalloc_slab().  But if we
get there with size > KMALLOC_MAX_CACHE_SIZE anyhow bad things will
happen.  For example, in case of a newly introduced bug in slub code.

Also move the check in kmalloc_slab() from function entry to the size >
192 case.  This partially compensates for the additional check in slab
code and makes slub code a bit faster (at least theoretically).

Also drop __GFP_NOWARN in the warning check.  This warning means a bug in
slab code itself, user-passed flags have nothing to do with it.

Nothing of this affects slob.

Link: http://lkml.kernel.org/r/20180927171502.226522-1-dvyukov@gmail.com
Signed-off-by: Dmitry Vyukov <dvyukov@google.com>
Reported-by: syzbot+87829a10073277282ad1@syzkaller.appspotmail.com
Reported-by: syzbot+ef4e8fc3a06e9019bb40@syzkaller.appspotmail.com
Reported-by: syzbot+6e438f4036df52cbb863@syzkaller.appspotmail.com
Reported-by: syzbot+8574471d8734457d98aa@syzkaller.appspotmail.com
Reported-by: syzbot+af1504df0807a083dbd9@syzkaller.appspotmail.com
Acked-by: Christoph Lameter <cl@linux.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

llc: do not use sk_eat_skb()

commit 604d415e2bd642b7e02c80e719e0396b9d4a77a6 upstream.

syzkaller triggered a use-after-free [1], caused by a combination of
skb_get() in llc_conn_state_process() and usage of sk_eat_skb()

sk_eat_skb() is assuming the skb about to be freed is only used by
the current thread. TCP/DCCP stacks enforce this because current
thread holds the socket lock.

llc_conn_state_process() wants to make sure skb does not disappear,
and holds a reference on the skb it manipulates. But as soon as this
skb is added to socket receive queue, another thread can consume it.

This means that llc must use regular skb_unlink() and kfree_skb()
so that both producer and consumer can safely work on the same skb.

[1]
BUG: KASAN: use-after-free in atomic_read include/asm-generic/atomic-instrumented.h:21 [inline]
BUG: KASAN: use-after-free in refcount_read include/linux/refcount.h:43 [inline]
BUG: KASAN: use-after-free in skb_unref include/linux/skbuff.h:967 [inline]
BUG: KASAN: use-after-free in kfree_skb+0xb7/0x580 net/core/skbuff.c:655
Read of size 4 at addr ffff8801d1f6fba4 by task ksoftirqd/1/18

CPU: 1 PID: 18 Comm: ksoftirqd/1 Not tainted 4.19.0-rc8+ #295
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x1c4/0x2b6 lib/dump_stack.c:113
 print_address_description.cold.8+0x9/0x1ff mm/kasan/report.c:256
 kasan_report_error mm/kasan/report.c:354 [inline]
 kasan_report.cold.9+0x242/0x309 mm/kasan/report.c:412
 check_memory_region_inline mm/kasan/kasan.c:260 [inline]
 check_memory_region+0x13e/0x1b0 mm/kasan/kasan.c:267
 kasan_check_read+0x11/0x20 mm/kasan/kasan.c:272
 atomic_read include/asm-generic/atomic-instrumented.h:21 [inline]
 refcount_read include/linux/refcount.h:43 [inline]
 skb_unref include/linux/skbuff.h:967 [inline]
 kfree_skb+0xb7/0x580 net/core/skbuff.c:655
 llc_sap_state_process+0x9b/0x550 net/llc/llc_sap.c:224
 llc_sap_rcv+0x156/0x1f0 net/llc/llc_sap.c:297
 llc_sap_handler+0x65e/0xf80 net/llc/llc_sap.c:438
 llc_rcv+0x79e/0xe20 net/llc/llc_input.c:208
 __netif_receive_skb_one_core+0x14d/0x200 net/core/dev.c:4913
 __netif_receive_skb+0x2c/0x1e0 net/core/dev.c:5023
 process_backlog+0x218/0x6f0 net/core/dev.c:5829
 napi_poll net/core/dev.c:6249 [inline]
 net_rx_action+0x7c5/0x1950 net/core/dev.c:6315
 __do_softirq+0x30c/0xb03 kernel/softirq.c:292
 run_ksoftirqd+0x94/0x100 kernel/softirq.c:653
 smpboot_thread_fn+0x68b/0xa00 kernel/smpboot.c:164
 kthread+0x35a/0x420 kernel/kthread.c:246
 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:413

Allocated by task 18:
 save_stack+0x43/0xd0 mm/kasan/kasan.c:448
 set_track mm/kasan/kasan.c:460 [inline]
 kasan_kmalloc+0xc7/0xe0 mm/kasan/kasan.c:553
 kasan_slab_alloc+0x12/0x20 mm/kasan/kasan.c:490
 kmem_cache_alloc_node+0x144/0x730 mm/slab.c:3644
 __alloc_skb+0x119/0x770 net/core/skbuff.c:193
 alloc_skb include/linux/skbuff.h:995 [inline]
 llc_alloc_frame+0xbc/0x370 net/llc/llc_sap.c:54
 llc_station_ac_send_xid_r net/llc/llc_station.c:52 [inline]
 llc_station_rcv+0x1dc/0x1420 net/llc/llc_station.c:111
 llc_rcv+0xc32/0xe20 net/llc/llc_input.c:220
 __netif_receive_skb_one_core+0x14d/0x200 net/core/dev.c:4913
 __netif_receive_skb+0x2c/0x1e0 net/core/dev.c:5023
 process_backlog+0x218/0x6f0 net/core/dev.c:5829
 napi_poll net/core/dev.c:6249 [inline]
 net_rx_action+0x7c5/0x1950 net/core/dev.c:6315
 __do_softirq+0x30c/0xb03 kernel/softirq.c:292

Freed by task 16383:
 save_stack+0x43/0xd0 mm/kasan/kasan.c:448
 set_track mm/kasan/kasan.c:460 [inline]
 __kasan_slab_free+0x102/0x150 mm/kasan/kasan.c:521
 kasan_slab_free+0xe/0x10 mm/kasan/kasan.c:528
 __cache_free mm/slab.c:3498 [inline]
 kmem_cache_free+0x83/0x290 mm/slab.c:3756
 kfree_skbmem+0x154/0x230 net/core/skbuff.c:582
 __kfree_skb+0x1d/0x20 net/core/skbuff.c:642
 sk_eat_skb include/net/sock.h:2366 [inline]
 llc_ui_recvmsg+0xec2/0x1610 net/llc/af_llc.c:882
 sock_recvmsg_nosec net/socket.c:794 [inline]
 sock_recvmsg+0xd0/0x110 net/socket.c:801
 ___sys_recvmsg+0x2b6/0x680 net/socket.c:2278
 __sys_recvmmsg+0x303/0xb90 net/socket.c:2390
 do_sys_recvmmsg+0x181/0x1a0 net/socket.c:2466
 __do_sys_recvmmsg net/socket.c:2484 [inline]
 __se_sys_recvmmsg net/socket.c:2480 [inline]
 __x64_sys_recvmmsg+0xbe/0x150 net/socket.c:2480
 do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

The buggy address belongs to the object at ffff8801d1f6fac0
 which belongs to the cache skbuff_head_cache of size 232
The buggy address is located 228 bytes inside of
 232-byte region [ffff8801d1f6fac0, ffff8801d1f6fba8)
The buggy address belongs to the page:
page:ffffea000747dbc0 count:1 mapcount:0 mapping:ffff8801d9be7680 index:0xffff8801d1f6fe80
flags: 0x2fffc0000000100(slab)
raw: 02fffc0000000100 ffffea0007346e88 ffffea000705b108 ffff8801d9be7680
raw: ffff8801d1f6fe80 ffff8801d1f6f0c0 000000010000000b 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
 ffff8801d1f6fa80: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb
 ffff8801d1f6fb00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>ffff8801d1f6fb80: fb fb fb fb fb fc fc fc fc fc fc fc fc fc fc fc
                               ^
 ffff8801d1f6fc00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
 ffff8801d1f6fc80: fb fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gfs2: Don't leave s_fs_info pointing to freed memory in init_sbd

commit 4c62bd9cea7bcf10292f7e4c57a2bca332942697 upstream.

When alloc_percpu() fails, sdp gets freed but sb->s_fs_info still points
to the same address. Move the assignment after that error check so that
s_fs_info can only point to a valid sdp or NULL, which is checked for
later in the error path, in gfs2_kill_super().

Reported-by: syzbot+dcb8b3587445007f5808@syzkaller.appspotmail.com
Signed-off-by: Andrew Price <anprice@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sctp: clear the transport of some out_chunk_list chunks in sctp_assoc_rm_peer

commit df132eff463873e14e019a07f387b4d577d6d1f9 upstream.

If a transport is removed by asconf but there still are some chunks with
this transport queuing on out_chunk_list, later an use-after-free issue
will be caused when accessing this transport from these chunks in
sctp_outq_flush().

This is an old bug, we fix it by clearing the transport of these chunks
in out_chunk_list when removing a transport in sctp_assoc_rm_peer().

Reported-by: syzbot+56a40ceee5fb35932f4d@syzkaller.appspotmail.com
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bfs: add sanity check at bfs_fill_super()

commit 9f2df09a33aa2c76ce6385d382693f98d7f2f07e upstream.

syzbot is reporting too large memory allocation at bfs_fill_super() [1].
Since file system image is corrupted such that bfs_sb->s_start == 0,
bfs_fill_super() is trying to allocate 8MB of continuous memory. Fix
this by adding a sanity check on bfs_sb->s_start, __GFP_NOWARN and
printf().

[1] https://syzkaller.appspot.com/bug?id=16a87c236b951351374a84c8a32f40edbc034e96

Link: http://lkml.kernel.org/r/1525862104-3407-1-git-send-email-penguin-kernel@I-love.SAKURA.ne.jp
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reported-by: syzbot <syzbot+71c6b5d68e91149fc8a4@syzkaller.appspotmail.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Tigran Aivazian <aivazian.tigran@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

selinux: Add __GFP_NOWARN to allocation at str_read()

commit 4458bba09788e70e8fb39ad003f087cd9dfbd6ac upstream.

syzbot is hitting warning at str_read() [1] because len parameter can
become larger than KMALLOC_MAX_SIZE. We don't need to emit warning for
this case.

[1] https://syzkaller.appspot.com/bug?id=7f2f5aad79ea8663c296a2eedb81978401a908f0

Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reported-by: syzbot <syzbot+ac488b9811036cea7ea0@syzkaller.appspotmail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

v9fs_dir_readdir: fix double-free on p9stat_read error

commit 81c99089bce693b94b775b6eb888115d2d540086 upstream.

p9stat_read will call p9stat_free on error, we should only free the
struct content on success.

There also is no need to "p9stat_init" st as the read function will
zero the whole struct for us anyway, so clean up the code a bit while
we are here.

Link: http://lkml.kernel.org/r/1535410108-20650-1-git-send-email-asmadeus@codewreck.org
Signed-off-by: Dominique Martinet <dominique.martinet@cea.fr>
Reported-by: syzbot+d4252148d198410b864f@syzkaller.appspotmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tools/power/cpupower: fix compilation with STATIC=true

commit 9de9aa45e9bd67232e000cca42ceb134b8ae51b6 upstream.

Rename duplicate sysfs_read_file into cpupower_read_sysfs and fix linking.

Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Acked-by: Thomas Renninger <trenn@suse.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

brcmfmac: fix reporting support for 160 MHz channels

commit d1fe6ad6f6bd61c84788d3a7b11e459a439c6169 upstream.

Driver can report IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ so it's
important to provide valid & complete info about supported bands for
each channel. By default no support for 160 MHz should be assumed unless
firmware reports it for a given channel later.

This fixes info passed to the userspace. Without that change userspace
could try to use invalid channel and fail to start an interface.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Cc: stable@vger.kernel.org
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iwlwifi: mvm: fix regulatory domain update when the firmware starts

commit 82715ac71e6b94a2c2136e31f3a8e6748e33aa8c upstream.

When the firmware starts, it doesn't have any regulatory
information, hence it uses the world wide limitations. The
driver can feed the firmware with previous knowledge that
was kept in the driver, but the firmware may still not
update its internal tables.

This happens when we start a BSS interface, and then the
firmware can change the regulatory tables based on our
location and it'll use more lenient, location specific
rules. Then, if the firmware is shut down (when the
interface is brought down), and then an AP interface is
created, the firmware will forget the country specific
rules.

The host will think that we are in a certain country that
may allow channels and will try to teach the firmware about
our location, but the firmware may still not allow to drop
the world wide limitations and apply country specific rules
because it was just re-started.

In this case, the firmware will reply with MCC_RESP_ILLEGAL
to the MCC_UPDATE_CMD. In that case, iwlwifi needs to let
the upper layers (cfg80211 / hostapd) know that the channel
list they know about has been updated.

This fixes https://bugzilla.kernel.org/show_bug.cgi?id=201105

Cc: stable@vger.kernel.org
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iwlwifi: mvm: support sta_statistics() even on older firmware

commit ec484d03ef0df8d34086b95710e355a259cbe1f2 upstream.

The oldest firmware supported by iwlmvm do support getting
the average beacon RSSI. Enable the sta_statistics() call
from mac80211 even on older firmware versions.

Fixes: 33cef9256342 ("iwlwifi: mvm: support beacon statistics for BSS client")
Cc: stable@vger.kernel.org # 4.2+
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gpio: don't free unallocated ida on gpiochip_add_data_with_key() error path

commit a05a14049999598a3bb6fab12db6b768a0215522 upstream.

The change corrects the error path in gpiochip_add_data_with_key()
by avoiding to call ida_simple_remove(), if ida_simple_get() returns
an error.

Note that ida_simple_remove()/ida_free() throws a BUG(), if id argument
is negative, it allows to easily check the correctness of the fix by
fuzzing the return value from ida_simple_get().

Fixes: ff2b13592299 ("gpio: make the gpiochip a real device")
Cc: stable@vger.kernel.org # v4.6+
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

MAINTAINERS: Add Sasha as a stable branch maintainer

commit cb5d21946d2a2f4687c482ab4604af1d29dac35a upstream.

Sasha has somehow been convinced into helping me with the stable kernel
maintenance.  Codify this slip in good judgement before he realizes what
he really signed up for :)

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: xhci: fix timeout for transition from RExit to U0

commit a5baeaeabcca3244782a9b6382ebab6f8a58f583 upstream.

This definition is used by msecs_to_jiffies in milliseconds.
According to the comments, max rexit timeout should be 20ms.
Align with the comments to properly calculate the delay.

Verified on Sunrise Point-LP and Cannon Lake.

Cc: stable@vger.kernel.org
Signed-off-by: Aaron Ma <aaron.ma@canonical.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: dwc3: core: Clean up ULPI device

commit 08fd9a82fda86529bb2f2af3c2f7cb657b4d3066 upstream.

If dwc3_core_init_mode() fails with deferred probe,
next probe fails on sysfs with

sysfs: cannot create duplicate filename '/devices/pci0000:00/0000:00:11.0/dwc3.0.auto/dwc3.0.auto.ulpi'

To avoid this failure, clean up ULPI device.

Cc: <stable@vger.kernel.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: core: Fix hub port connection events lost

commit 22454b79e6de05fa61a2a72d00d2eed798abbb75 upstream.

This will clear the USB_PORT_FEAT_C_CONNECTION bit in case of a hub port reset
only if a device is was attached to the hub port before resetting the hub port.

Using a Lenovo T480s attached to the ultra dock it was not possible to detect
some usb-c devices at the dock usb-c ports because the hub_port_reset code
will clear the USB_PORT_FEAT_C_CONNECTION bit after the actual hub port reset.
Using this device combo the USB_PORT_FEAT_C_CONNECTION bit was set between the
actual hub port reset and the clear of the USB_PORT_FEAT_C_CONNECTION bit.
This ends up with clearing the USB_PORT_FEAT_C_CONNECTION bit after the
new device was attached such that it was not detected.

This patch will not clear the USB_PORT_FEAT_C_CONNECTION bit if there is
currently no device attached to the port before the hub port reset.
This will avoid clearing the connection bit for new attached devices.

Signed-off-by: Dennis Wassenberg <dennis.wassenberg@secunet.com>
Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 4.9.141

libceph: fall back to sendmsg for slab pages

commit 7e241f647dc7087a0401418a187f3f5b527cc690 upstream.

skb_can_coalesce() allows coalescing neighboring slab objects into
a single frag:

  return page == skb_frag_page(frag) &&
         off == frag->page_offset + skb_frag_size(frag);

ceph_tcp_sendpage() can be handed slab pages.  One example of this is
XFS: it passes down sector sized slab objects for its metadata I/O.  If
the kernel client is co-located on the OSD node, the skb may go through
loopback and pop on the receive side with the exact same set of frags.
When tcp_recvmsg() attempts to copy out such a frag, hardened usercopy
complains because the size exceeds the object's allocated size:

  usercopy: kernel memory exposure attempt detected from ffff9ba917f20a00 (kmalloc-512) (1024 bytes)

Although skb_can_coalesce() could be taught to return false if the
resulting frag would cross a slab object boundary, we already have
a fallback for non-refcounted pages.  Utilize it for slab pages too.

Cc: stable@vger.kernel.org # 4.8+
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

HID: uhid: forbid UHID_CREATE under KERNEL_DS or elevated privileges

commit 8c01db7619f07c85c5cd81ec5eb83608b56c88f5 upstream.

When a UHID_CREATE command is written to the uhid char device, a
copy_from_user() is done from a user pointer embedded in the command.
When the address limit is KERNEL_DS, e.g. as is the case during
sys_sendfile(), this can read from kernel memory.  Alternatively,
information can be leaked from a setuid binary that is tricked to write
to the file descriptor.  Therefore, forbid UHID_CREATE in these cases.

No other commands in uhid_char_write() are affected by this bug and
UHID_CREATE is marked as "obsolete", so apply the restriction to
UHID_CREATE only rather than to uhid_char_write() entirely.

Thanks to Dmitry Vyukov for adding uhid definitions to syzkaller and to
Jann Horn for commit 9da3f2b740544 ("x86/fault: BUG() when uaccess
helpers fault on kernel addresses"), allowing this bug to be found.

Reported-by: syzbot+72473edc9bf4eb1c6556@syzkaller.appspotmail.com
Fixes: d365c6cfd337 ("HID: uhid: add UHID_CREATE and UHID_DESTROY events")
Cc: <stable@vger.kernel.org> # v3.6+
Cc: Jann Horn <jannh@google.com>
Cc: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Jann Horn <jannh@google.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

new helper: uaccess_kernel()

commit db68ce10c4f0a27c1ff9fa0e789e5c41f8c4ea63 upstream.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
[only take the include/linux/uaccess.h portion - gregkh]
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ACPI / platform: Add SMB0001 HID to forbidden_id_list

commit 2bbb5fa37475d7aa5fa62f34db1623f3da2dfdfa upstream.

Many HP AMD based laptops contain an SMB0001 device like this:

Device (SMBD)
{
    Name (_HID, "SMB0001")  // _HID: Hardware ID
    Name (_CRS, ResourceTemplate ()  // _CRS: Current Resource Settings
    {
        IO (Decode16,
            0x0B20,             // Range Minimum
            0x0B20,             // Range Maximum
            0x20,               // Alignment
            0x20,               // Length
            )
        IRQ (Level, ActiveLow, Shared, )
            {7}
    })
}

The legacy style IRQ resource here causes acpi_dev_get_irqresource() to
be called with legacy=true and this message to show in dmesg:
ACPI: IRQ 7 override to edge, high

This causes issues when later on the AMD0030 GPIO device gets enumerated:

Device (GPIO)
{
    Name (_HID, "AMDI0030")  // _HID: Hardware ID
    Name (_CID, "AMDI0030")  // _CID: Compatible ID
    Name (_UID, Zero)  // _UID: Unique ID
    Method (_CRS, 0, NotSerialized)  // _CRS: Current Resource Settings
    {
Name (RBUF, ResourceTemplate ()
{
    Interrupt (ResourceConsumer, Level, ActiveLow, Shared, ,, )
    {
0x00000007,
    }
    Memory32Fixed (ReadWrite,
0xFED81500,         // Address Base
0x00000400,         // Address Length
)
})
Return (RBUF) /* \_SB_.GPIO._CRS.RBUF */
    }
}

Now acpi_dev_get_irqresource() gets called with legacy=false, but because
of the earlier override of the trigger-type acpi_register_gsi() returns
-EBUSY (because we try to register the same interrupt with a different
trigger-type) and we end up setting IORESOURCE_DISABLED in the flags.

The setting of IORESOURCE_DISABLED causes platform_get_irq() to call
acpi_irq_get() which is not implemented on x86 and returns -EINVAL.
resulting in the following in dmesg:

amd_gpio AMDI0030:00: Failed to get gpio IRQ: -22
amd_gpio: probe of AMDI0030:00 failed with error -22

The SMB0001 is a "virtual" device in the sense that the only way the OS
interacts with it is through calling a couple of methods to do SMBus
transfers. As such it is weird that it has IO and IRQ resources at all,
because the driver for it is not expected to ever access the hardware
directly.

The Linux driver for the SMB0001 device directly binds to the acpi_device
through the acpi_bus, so we do not need to instantiate a platform_device
for this ACPI device. This commit adds the SMB0001 HID to the
forbidden_id_list, avoiding the instantiating of a platform_device for it.
Not instantiating a platform_device means we will no longer call
acpi_dev_get_irqresource() for the legacy IRQ resource fixing the probe of
the AMDI0030 device failing.

BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1644013
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=198715
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=199523
Reported-by: Lukas Kahnert <openproggerfreak@gmail.com>
Tested-by: Marc <suaefar@googlemail.com>
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/misc/sgi-gru: fix Spectre v1 vulnerability

commit fee05f455ceb5c670cbe48e2f9454ebc4a388554 upstream.

req.gid can be indirectly controlled by user-space, hence leading to
a potential exploitation of the Spectre variant 1 vulnerability.

This issue was detected with the help of Smatch:

vers/misc/sgi-gru/grukdump.c:200 gru_dump_chiplet_request() warn:
potential spectre issue 'gru_base' [w]

Fix this by sanitizing req.gid before calling macro GID_TO_GRU, which
uses it to index gru_base.

Notice that given that speculation windows are large, the policy is
to kill the speculation on the first load and not worry if it can be
completed with a dependent load/store [1].

[1] https://marc.info/?l=linux-kernel&m=152449131114778&w=2

Cc: stable@vger.kernel.org
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: misc: appledisplay: add 20" Apple Cinema Display

commit f6501f49199097b99e4e263644d88c90d1ec1060 upstream.

Add another Apple Cinema Display to the list of supported displays

Signed-off-by: Mattias Jacobsson <2pi@mok.nu>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

misc: atmel-ssc: Fix section annotation on atmel_ssc_get_driver_data

commit 7c97301285b62a41d6bceded7d964085fc8cc50f upstream.

After building the kernel with Clang, the following section mismatch
warning appears:

WARNING: vmlinux.o(.text+0x3bf19a6): Section mismatch in reference from
the function ssc_probe() to the function
.init.text:atmel_ssc_get_driver_data()
The function ssc_probe() references
the function __init atmel_ssc_get_driver_data().
This is often because ssc_probe lacks a __init
annotation or the annotation of atmel_ssc_get_driver_data is wrong.

Remove __init from atmel_ssc_get_driver_data to get rid of the mismatch.

Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: quirks: Add delay-init quirk for Corsair K70 LUX RGB

commit a77112577667cbda7c6292c52d909636aef31fd9 upstream.

Following on from this patch: https://lkml.org/lkml/2017/11/3/516,
Corsair K70 LUX RGB keyboards also require the DELAY_INIT quirk to
start correctly at boot.

Dmesg output:
usb 1-6: string descriptor 0 read error: -110
usb 1-6: New USB device found, idVendor=1b1c, idProduct=1b33
usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-6: can't set config #1, error -110

Signed-off-by: Emmanuel Pescosta <emmanuelpescosta099@gmail.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: quirks: Add no-lpm quirk for Raydium touchscreens

commit deefd24228a172d1b27d4a9adbfd2cdacd60ae64 upstream.

Raydium USB touchscreen fails to set config if LPM is enabled:
[    2.030658] usb 1-8: New USB device found, idVendor=2386, idProduct=3119
[    2.030659] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.030660] usb 1-8: Product: Raydium Touch System
[    2.030661] usb 1-8: Manufacturer: Raydium Corporation
[    7.132209] usb 1-8: can't set config #1, error -110

Same behavior can be observed on 2386:3114.

Raydium claims the touchscreen supports LPM under Windows, so I used
Microsoft USB Test Tools (MUTT) [1] to check its LPM status. MUTT shows
that the LPM doesn't work under Windows, either. So let's just disable LPM
for Raydium touchscreens.

[1] https://docs.microsoft.com/en-us/windows-hardware/drivers/usbcon/usb-test-tools

Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: cdc-acm: add entry for Hiro (Conexant) modem

commit 63529eaa6164ef7ab4b907b25ac3648177e5e78f upstream.

The cdc-acm kernel module currently does not support the Hiro (Conexant)
H05228 USB modem. The patch below adds the device specific information:
idVendor 0x0572
idProduct 0x1349

Signed-off-by: Maarten Jacobs <maarten256@outlook.com>
Acked-by: Oliver Neukum <oneukum@suse.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

uio: Fix an Oops on load

commit 432798195bbce1f8cd33d1c0284d0538835e25fb upstream.

I was trying to solve a double free but I introduced a more serious
NULL dereference bug.  The problem is that if there is an IRQ which
triggers immediately, then we need "info->uio_dev" but it's not set yet.

This patch puts the original initialization back to how it was and just
sets info->uio_dev to NULL on the error path so it should solve both
the Oops and the double free.

Fixes: f019f07ecf6a ("uio: potential double frees if __uio_register_device() fails")
Reported-by: Mathias Thore <Mathias.Thore@infinera.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: stable <stable@vger.kernel.org>
Tested-by: Mathias Thore <Mathias.Thore@infinera.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: v4l: event: Add subscription to list before calling "add" operation

commit 92539d3eda2c090b382699bbb896d4b54e9bdece upstream.

Patch ad608fbcf166 changed how events were subscribed to address an issue
elsewhere. As a side effect of that change, the "add" callback was called
before the event subscription was added to the list of subscribed events,
causing the first event queued by the add callback (and possibly other
events arriving soon afterwards) to be lost.

Fix this by adding the subscription to the list before calling the "add"
callback, and clean up afterwards if that fails.

Fixes: ad608fbcf166 ("media: v4l: event: Prevent freeing event subscriptions while accessed")

Reported-by: Dave Stevenson <dave.stevenson@raspberrypi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Dave Stevenson <dave.stevenson@raspberrypi.org>
Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com>
Tested-by: Hans Verkuil <hans.verkuil@cisco.com>
Cc: stable@vger.kernel.org (for 4.14 and up)
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
[Sakari Ailus: Backported to v4.9 stable]
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "Bluetooth: h5: Fix missing dependency on BT_HCIUART_SERDEV"

This reverts commit b5c98d8ca8f93a4f73e9cbb53c7e6b8c78ed3f80 which is
commit 6c3711ec64fd23a9abc8aaf59a9429569a6282df upstream.

You Ling writes that this config option isn't even in 4.9.y yet, so it
causes a regression.  Revert the patch because of this.

Reported-by: youling 257 <youling257@gmail.com>
Cc: Johan Hedberg <johan.hedberg@intel.com>
Cc: Marcel Holtmann <marcel@holtmann.org>
Cc: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "media: videobuf2-core: don't call memop 'finish' when queueing"

This reverts commit 9ac47200b51cb09d2f15dbefa67e0412741d98aa.

This commit fixes a bug in upstream commit a136f59c0a1f ("vb2: Move
buffer cache synchronisation to prepare from queue") which isn't
present in 4.9.

So as a result you get an UNBALANCED message in the kernel log if
this patch is applied:

vb2:   counters for queue ffffffc0f3687478, buffer 3: UNBALANCED!
vb2:     buf_init: 1 buf_cleanup: 1 buf_prepare: 805 buf_finish: 805
vb2:     buf_queue: 806 buf_done: 806
vb2:     alloc: 0 put: 0 prepare: 806 finish: 805 mmap: 0
vb2:     get_userptr: 0 put_userptr: 0
vb2:     attach_dmabuf: 1 detach_dmabuf: 1 map_dmabuf: 805 unmap_dmabuf: 805
vb2:     get_dmabuf: 0 num_users: 1609 vaddr: 0 cookie: 805

Reverting this patch solves this regression.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

btrfs: fix pinned underflow after transaction aborted

commit fcd5e74288f7d36991b1f0fb96b8c57079645e38 upstream.

When running generic/475, we may get the following warning in dmesg:

[ 6902.102154] WARNING: CPU: 3 PID: 18013 at fs/btrfs/extent-tree.c:9776 btrfs_free_block_groups+0x2af/0x3b0 [btrfs]
[ 6902.109160] CPU: 3 PID: 18013 Comm: umount Tainted: G        W  O      4.19.0-rc8+ #8
[ 6902.110971] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
[ 6902.112857] RIP: 0010:btrfs_free_block_groups+0x2af/0x3b0 [btrfs]
[ 6902.118921] RSP: 0018:ffffc9000459bdb0 EFLAGS: 00010286
[ 6902.120315] RAX: ffff880175050bb0 RBX: ffff8801124a8000 RCX: 0000000000170007
[ 6902.121969] RDX: 0000000000000002 RSI: 0000000000170007 RDI: ffffffff8125fb74
[ 6902.123716] RBP: ffff880175055d10 R08: 0000000000000000 R09: 0000000000000000
[ 6902.125417] R10: 0000000000000000 R11: 0000000000000000 R12: ffff880175055d88
[ 6902.127129] R13: ffff880175050bb0 R14: 0000000000000000 R15: dead000000000100
[ 6902.129060] FS:  00007f4507223780(0000) GS:ffff88017ba00000(0000) knlGS:0000000000000000
[ 6902.130996] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 6902.132558] CR2: 00005623599cac78 CR3: 000000014b700001 CR4: 00000000003606e0
[ 6902.134270] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 6902.135981] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 6902.137836] Call Trace:
[ 6902.138939]  close_ctree+0x171/0x330 [btrfs]
[ 6902.140181]  ? kthread_stop+0x146/0x1f0
[ 6902.141277]  generic_shutdown_super+0x6c/0x100
[ 6902.142517]  kill_anon_super+0x14/0x30
[ 6902.143554]  btrfs_kill_super+0x13/0x100 [btrfs]
[ 6902.144790]  deactivate_locked_super+0x2f/0x70
[ 6902.146014]  cleanup_mnt+0x3b/0x70
[ 6902.147020]  task_work_run+0x9e/0xd0
[ 6902.148036]  do_syscall_64+0x470/0x600
[ 6902.149142]  ? trace_hardirqs_off_thunk+0x1a/0x1c
[ 6902.150375]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 6902.151640] RIP: 0033:0x7f45077a6a7b
[ 6902.157324] RSP: 002b:00007ffd589f3e68 EFLAGS: 00000246 ORIG_RAX: 00000000000000a6
[ 6902.159187] RAX: 0000000000000000 RBX: 000055e8eec732b0 RCX: 00007f45077a6a7b
[ 6902.160834] RDX: 0000000000000001 RSI: 0000000000000000 RDI: 000055e8eec73490
[ 6902.162526] RBP: 0000000000000000 R08: 000055e8eec734b0 R09: 00007ffd589f26c0
[ 6902.164141] R10: 0000000000000000 R11: 0000000000000246 R12: 000055e8eec73490
[ 6902.165815] R13: 00007f4507ac61a4 R14: 0000000000000000 R15: 00007ffd589f40d8
[ 6902.167553] irq event stamp: 0
[ 6902.168998] hardirqs last  enabled at (0): [<0000000000000000>]           (null)
[ 6902.170731] hardirqs last disabled at (0): [<ffffffff810cd810>] copy_process.part.55+0x3b0/0x1f00
[ 6902.172773] softirqs last  enabled at (0): [<ffffffff810cd810>] copy_process.part.55+0x3b0/0x1f00
[ 6902.174671] softirqs last disabled at (0): [<0000000000000000>]           (null)
[ 6902.176407] ---[ end trace 463138c2986b275c ]---
[ 6902.177636] BTRFS info (device dm-3): space_info 4 has 273465344 free, is not full
[ 6902.179453] BTRFS info (device dm-3): space_info total=276824064, used=4685824, pinned=18446744073708158976, reserved=0, may_use=0, readonly=65536

In the above line there's "pinned=18446744073708158976" which is an
unsigned u64 value of -1392640, an obvious underflow.

When transaction_kthread is running cleanup_transaction(), another
fsstress is running btrfs_commit_transaction(). The
btrfs_finish_extent_commit() may get the same range as
btrfs_destroy_pinned_extent() got, which causes the pinned underflow.

Fixes: d4b450cd4b33 ("Btrfs: fix race between transaction commit and empty block group removal")
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Lu Fengqi <lufq.fnst@cn.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

btrfs: Ensure btrfs_trim_fs can trim the whole filesystem

Commit 6ba9fc8e628becf0e3ec94083450d089b0dec5f5 upstream.

[BUG]
fstrim on some btrfs only trims the unallocated space, not trimming any
space in existing block groups.

[CAUSE]
Before fstrim_range passed to btrfs_trim_fs(), it gets truncated to
range [0, super->total_bytes).  So later btrfs_trim_fs() will only be
able to trim block groups in range [0, super->total_bytes).

While for btrfs, any bytenr aligned to sectorsize is valid, since btrfs
uses its logical address space, there is nothing limiting the location
where we put block groups.

For filesystem with frequent balance, it's quite easy to relocate all
block groups and bytenr of block groups will start beyond
super->total_bytes.

In that case, btrfs will not trim existing block groups.

[FIX]
Just remove the truncation in btrfs_ioctl_fitrim(), so btrfs_trim_fs()
can get the unmodified range, which is normally set to [0, U64_MAX].

Reported-by: Chris Murphy <lists@colorremedies.com>
Fixes: f4c697e6406d ("btrfs: return EINVAL if start > total_bytes in fitrim ioctl")
CC: <stable@vger.kernel.org> # v4.9
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[ change parameter from @fs_info to @fs_info->root for older kernel ]
Signed-off-by: Sasha Levin <sashal@kernel.org>

btrfs: Enhance btrfs_trim_fs function to handle error better

Commit 93bba24d4b5ad1e5cd8b43f64e66ff9d6355dd20 upstream.

Function btrfs_trim_fs() doesn't handle errors in a consistent way. If
error happens when trimming existing block groups, it will skip the
remaining blocks and continue to trim unallocated space for each device.

The return value will only reflect the final error from device trimming.

This patch will fix such behavior by:

1) Recording the last error from block group or device trimming
   The return value will also reflect the last error during trimming.
   Make developer more aware of the problem.

2) Continuing trimming if possible
   If we failed to trim one block group or device, we could still try
   the next block group or device.

3) Report number of failures during block group and device trimming
   It would be less noisy, but still gives user a brief summary of
   what's going wrong.

Such behavior can avoid confusion for cases like failure to trim the
first block group and then only unallocated space is trimmed.

Reported-by: Chris Murphy <lists@colorremedies.com>
CC: stable@vger.kernel.org # 4.9
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ add bg_ret and dev_ret to the messages ]
Signed-off-by: David Sterba <dsterba@suse.com>
[ change parameter from @fs_info to @fs_info->root for older kernel ]
Signed-off-by: Sasha Levin <sashal@kernel.org>

ACPI / watchdog: Prefer iTCO_wdt always when WDAT table uses RTC SRAM

[ Upstream commit 5a802a7a285c8877ca872e44eeb0f06afcb5212f ]

After we added quirk for Lenovo Z50-70 it turns out there are at least
two more systems where WDAT table includes instructions accessing RTC
SRAM. Instead of quirking each system separately, look for such
instructions in the table and automatically prefer iTCO_wdt if found.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=199033
Reported-by: Arnold Guy <aurnoldg@gmail.com>
Reported-by: Alois Nespor <nespor@fssp.cz>
Reported-by: Yury Pakin <zxwarior@gmail.com>
Reported-by: Ihor Chyhin <ihorchyhin@ukr.net>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ACPI / watchdog: Prefer iTCO_wdt on Lenovo Z50-70

[ Upstream commit a0a37862a4e1844793d39aca9ccb8fecbdcb8659 ]

WDAT table on Lenovo Z50-70 is using RTC SRAM (ports 0x70 and 0x71) to
store state of the timer. This conflicts with Linux RTC driver
(rtc-cmos.c) who fails to reserve those ports for itself preventing RTC
from functioning. In addition the WDAT table seems not to be fully
functional because it does not reset the system when the watchdog times
out.

On this system iTCO_wdt works just fine so we simply prefer to use it
instead of WDAT. This makes RTC working again and also results working
watchdog via iTCO_wdt.

Reported-by: Peter Milley <pbmilley@gmail.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=199033
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

gfs2: Put bitmap buffers in put_super

commit 10283ea525d30f2e99828978fd04d8427876a7ad upstream.

gfs2_put_super calls gfs2_clear_rgrpd to destroy the gfs2_rgrpd objects
attached to the resource group glocks.  That function should release the
buffers attached to the gfs2_bitmap objects (bi_bh), but the call to
gfs2_rgrp_brelse for doing that is missing.

When gfs2_releasepage later runs across these buffers which are still
referenced, it refuses to free them.  This causes the pages the buffers
are attached to to remain referenced as well.  With enough mount/unmount
cycles, the system will eventually run out of memory.

Fix this by adding the missing call to gfs2_rgrp_brelse in
gfs2_clear_rgrpd.

(Also fix a gfs2_rgrp_relse -> gfs2_rgrp_brelse typo in a comment.)

Fixes: 39b0f1e92908 ("GFS2: Don't brelse rgrp buffer_heads every allocation")
Cc: stable@vger.kernel.org # v4.9
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

SUNRPC: drop pointless static qualifier in xdr_get_next_encode_buffer()

[ Upstream commit 025911a5f4e36955498ed50806ad1b02f0f76288 ]

There is no need to have the '__be32 *p' variable static since new value
always be assigned before use it.

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

zram: close udev startup race condition as default groups

commit fef912bf860e upstream.
commit 98af4d4df889 upstream.

I got a report from Howard Chen that he saw zram and sysfs race(ie,
zram block device file is created but sysfs for it isn't yet)
when he tried to create new zram devices via hotadd knob.

v4.20 kernel fixes it by [1, 2] but it's too large size to merge
into -stable so this patch fixes the problem by registering defualt
group by Greg KH's approach[3].

This patch should be applied to every stable tree [3.16+] currently
existing from kernel.org because the problem was introduced at 2.6.37
by [4].

[1] fef912bf860e, block: genhd: add 'groups' argument to device_add_disk
[2] 98af4d4df889, zram: register default groups with device_add_disk()
[3] http://kroah.com/log/blog/2013/06/26/how-to-create-a-sysfs-file-correctly/
[4] 33863c21e69e9, Staging: zram: Replace ioctls with sysfs interface

Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Hannes Reinecke <hare@suse.com>
Tested-by: Howard Chen <howardsoc@google.com>
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

qed: Fix blocking/unlimited SPQ entries leak

[ Upstream commit 2632f22ebd08da249c2017962a199a0cfb2324bf ]

When there are no SPQ entries left in the free_pool, new entries are
allocated and are added to the unlimited list. When an entry in the pool
is available, the content is copied from the original entry, and the new
entry is sent to the device. qed_spq_post() is not aware of that, so the
additional entry is stored in the original entry as p_post_ent, which can
later be returned to the pool.

Signed-off-by: Denis Bolotin <denis.bolotin@cavium.com>
Signed-off-by: Michal Kalderon <michal.kalderon@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

qed: Fix memory/entry leak in qed_init_sp_request()

[ Upstream commit 39477551df940ddb1339203817de04f5caaacf7a ]

Free the allocated SPQ entry or return the acquired SPQ entry to the free
list in error flows.

Signed-off-by: Denis Bolotin <denis.bolotin@cavium.com>
Signed-off-by: Michal Kalderon <michal.kalderon@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

lib/raid6: Fix arm64 test build

[ Upstream commit 313a06e636808387822af24c507cba92703568b1 ]

The lib/raid6/test fails to build the neon objects
on arm64 because the correct machine type is 'aarch64'.

Once this is correctly enabled, the neon recovery objects
need to be added to the build.

Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: fixed-factor: fix of_node_get-put imbalance

[ Upstream commit f98e8a572bddbf27032114127d2fcc78fa5e6a9d ]

When the fixed factor clock is created by devicetree,
of_clk_add_provider is called.  Add a call to
of_clk_del_provider in the remove function to balance
it out.

Reported-by: Alan Tull <atull@kernel.org>
Fixes: 971451b3b15d ("clk: fixed-factor: Convert into a module platform driver")
Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

hwmon: (ibmpowernv) Remove bogus __init annotations

[ Upstream commit e3e61f01d755188cb6c2dcf5a244b9c0937c258e ]

If gcc decides not to inline make_sensor_label():

    WARNING: vmlinux.o(.text+0x4df549c): Section mismatch in reference from the function .create_device_attrs() to the function .init.text:.make_sensor_label()
    The function .create_device_attrs() references
    the function __init .make_sensor_label().
    This is often because .create_device_attrs lacks a __init
    annotation or the annotation of .make_sensor_label is wrong.

As .probe() can be called after freeing of __init memory, all __init
annotiations in the driver are bogus, and should be removed.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

s390/qeth: fix HiperSockets sniffer

[ Upstream commit bd74a7f9cc033cf4d405788f80292268987dc0c5 ]

Sniffing mode for L3 HiperSockets requires that no IP addresses are
registered with the HW. The preferred way to achieve this is for
userspace to delete all the IPs on the interface. But qeth is expected
to also tolerate a configuration where that is not the case, by skipping
the IP registration when in sniffer mode.
Since commit 5f78e29ceebf ("qeth: optimize IP handling in rx_mode callback")
reworked the IP registration logic in the L3 subdriver, this no longer
works. When the qeth device is set online, qeth_l3_recover_ip() now
unconditionally registers all unicast addresses from our internal
IP table.

While we could fix this particular problem by skipping
qeth_l3_recover_ip() on a sniffer device, the more future-proof change
is to skip the IP address registration at the lowest level. This way we
a) catch any future code path that attempts to register an IP address
   without considering the sniffer scenario, and
b) continue to build up our internal IP table, so that if sniffer mode
   is switched off later we can operate just like normal.

Fixes: 5f78e29ceebf ("qeth: optimize IP handling in rx_mode callback")
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: xt_IDLETIMER: add sysfs filename checking routine

[ Upstream commit 54451f60c8fa061af9051a53be9786393947367c ]

When IDLETIMER rule is added, sysfs file is created under
/sys/class/xt_idletimer/timers/
But some label name shouldn't be used.
".", "..", "power", "uevent", "subsystem", etc...
So that sysfs filename checking routine is needed.

test commands:
   %iptables -I INPUT -j IDLETIMER --timeout 1 --label "power"

splat looks like:
[95765.423132] sysfs: cannot create duplicate filename '/devices/virtual/xt_idletimer/timers/power'
[95765.433418] CPU: 0 PID: 8446 Comm: iptables Not tainted 4.19.0-rc6+ #20
[95765.449755] Call Trace:
[95765.449755]  dump_stack+0xc9/0x16b
[95765.449755]  ? show_regs_print_info+0x5/0x5
[95765.449755]  sysfs_warn_dup+0x74/0x90
[95765.449755]  sysfs_add_file_mode_ns+0x352/0x500
[95765.449755]  sysfs_create_file_ns+0x179/0x270
[95765.449755]  ? sysfs_add_file_mode_ns+0x500/0x500
[95765.449755]  ? idletimer_tg_checkentry+0x3e5/0xb1b [xt_IDLETIMER]
[95765.449755]  ? rcu_read_lock_sched_held+0x114/0x130
[95765.449755]  ? __kmalloc_track_caller+0x211/0x2b0
[95765.449755]  ? memcpy+0x34/0x50
[95765.449755]  idletimer_tg_checkentry+0x4e2/0xb1b [xt_IDLETIMER]
[ ... ]

Fixes: 0902b469bd25 ("netfilter: xtables: idletimer target implementation")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: ipset: Correct rcu_dereference() call in ip_set_put_comment()

[ Upstream commit 17b8b74c0f8dbf9b9e3301f9ca5b65dd1c079951 ]

The function is called when rcu_read_lock() is held and not
when rcu_read_lock_bh() is held.

Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

s390/mm: Fix ERROR: "__node_distance" undefined!

[ Upstream commit a541f0ebcc08ed8bc0cc492eec9a86cb280a9f24 ]

Fixes:
ERROR: "__node_distance" [drivers/nvme/host/nvme-core.ko] undefined!
make[1]: *** [scripts/Makefile.modpost:92: __modpost] Error 1
make: *** [Makefile:1275: modules] Error 2
+ exit 1

Signed-off-by: Justin M. Forbes <jforbes@fedoraproject.org>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: ipset: actually allow allowable CIDR 0 in hash:net,port,net

[ Upstream commit 886503f34d63e681662057448819edb5b1057a97 ]

Allow /0 as advertised for hash:net,port,net sets.

For "hash:net,port,net", ipset(8) says that "either subnet
is permitted to be a /0 should you wish to match port
between all destinations."

Make that statement true.

Before:

    # ipset create cidrzero hash:net,port,net
    # ipset add cidrzero 0.0.0.0/0,12345,0.0.0.0/0
    ipset v6.34: The value of the CIDR parameter of the IP address is invalid

    # ipset create cidrzero6 hash:net,port,net family inet6
    # ipset add cidrzero6 ::/0,12345,::/0
    ipset v6.34: The value of the CIDR parameter of the IP address is invalid

After:

    # ipset create cidrzero hash:net,port,net
    # ipset add cidrzero 0.0.0.0/0,12345,0.0.0.0/0
    # ipset test cidrzero 192.168.205.129,12345,172.16.205.129
    192.168.205.129,tcp:12345,172.16.205.129 is in set cidrzero.

    # ipset create cidrzero6 hash:net,port,net family inet6
    # ipset add cidrzero6 ::/0,12345,::/0
    # ipset test cidrzero6 fe80::1,12345,ff00::1
    fe80::1,tcp:12345,ff00::1 is in set cidrzero6.

See also:

  https://bugzilla.kernel.org/show_bug.cgi?id=200897
  https://github.com/ewestbrook/linux/commit/df7ff6efb0934ab6acc11f003ff1a7580d6c1d9c

Signed-off-by: Eric Westbrook <linux@westbrook.io>
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

s390/vdso: add missing FORCE to build targets

[ Upstream commit b44b136a3773d8a9c7853f8df716bd1483613cbb ]

According to Documentation/kbuild/makefiles.txt all build targets using
if_changed should use FORCE as well. Add missing FORCE to make sure
vdso targets are rebuild properly when not just immediate prerequisites
have changed but also when build command differs.

Reviewed-by: Philipp Rudo <prudo@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: percpu: Initialize ret in the default case

[ Upstream commit b5bb425871186303e6936fa2581521bdd1964a58 ]

Clang warns that if the default case is taken, ret will be
uninitialized.

./arch/arm64/include/asm/percpu.h:196:2: warning: variable 'ret' is used
uninitialized whenever switch default is taken
[-Wsometimes-uninitialized]
        default:
        ^~~~~~~
./arch/arm64/include/asm/percpu.h:200:9: note: uninitialized use occurs
here
        return ret;
               ^~~
./arch/arm64/include/asm/percpu.h:157:19: note: initialize the variable
'ret' to silence this warning
        unsigned long ret, loop;
                         ^
                          = 0

This warning appears several times while building the erofs filesystem.
While it's not strictly wrong, the BUILD_BUG will prevent this from
becoming a true problem. Initialize ret to 0 in the default case right
before the BUILD_BUG to silence all of these warnings.

Reported-by: Prasad Sodagudi <psodagud@codeaurora.org>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

platform/x86: acerhdf: Add BIOS entry for Gateway LT31 v1.3307

[ Upstream commit 684238d79ad85c5e19a71bb5818e77e329912fbc ]

To fix:

  acerhdf: unknown (unsupported) BIOS version Gateway  /LT31   /v1.3307 , please report, aborting!

As can be seen in the context, the BIOS registers haven't changed in
the previous versions, so the assumption is they won't have changed
in this last update for this somewhat older platform either.

Cc: Peter Feuerer <peter@piie.net>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Andy Shevchenko <andy@infradead.org>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Peter Feuerer <peter@piie.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: samsung: exynos5420: Enable PERIS clocks for suspend

[ Upstream commit b33228029d842269e17bba591609e83ed422005d ]

Ensure that clocks for core SoC modules (including TZPC0..9 modules)
are enabled for suspend/resume cycle. This fixes suspend/resume
support on Exynos5422-based Odroid XU3/XU4 boards.

Suggested-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Sylwester Nawrocki <snawrocki@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fs/exofs: fix potential memory leak in mount option parsing

[ Upstream commit 515f1867addaba49c1c6ac73abfaffbc192c1db4 ]

There are some cases can cause memory leak when parsing
option 'osdname'.

Signed-off-by: Chengguang Xu <cgxu519@gmx.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: fixed-rate: fix of_node_get-put imbalance

[ Upstream commit 52091c256bdcad0d01e2852a63f19cd2cce6af96 ]

When the fixed rate clock is created by devicetree,
of_clk_add_provider is called.  Add a call to
of_clk_del_provider in the remove function to balance
it out.

Signed-off-by: Alan Tull <atull@kernel.org>
Fixes: 435779fe1336 ("clk: fixed-rate: Convert into a module platform driver")
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

platform/x86: intel_telemetry: report debugfs failure

[ Upstream commit 8d98b1ef368feeb7720b8b9b6f3bd93f2ad892bc ]

On some Goldmont based systems such as ASRock J3455M the BIOS may not
enable the IPC1 device that provides access to the PMC and PUNIT. In
such scenarios, the IOSS and PSS resources from the platform device can
not be obtained and result in a invalid telemetry_plt_config which is an
internal data structure that holds platform config and is maintained by
the telemetry platform driver.

This is also applicable to the platforms where the BIOS supports IPC1
device under debug configurations but IPC1 is disabled by user or the
policy.

This change allows user to know the reason for not seeing entries under
/sys/kernel/debug/telemetry/* when there is no apparent failure at boot.

Cc: Matt Turner <matt.turner@intel.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Souvik Kumar Chakravarty <souvik.k.chakravarty@intel.com>
Cc: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@intel.com>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=198779
Acked-by: Matt Turner <matt.turner@intel.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/edid: Add 6 bpc quirk for BOE panel.

[ Upstream commit 922dceff8dc1fb4dafc9af78139ba65671408103 ]

BOE panel (ID: 0x0771) that reports "DFP 1.x compliant TMDS".
But it's 6bpc panel only instead of 8 bpc.

Add panel ID to edid quirk list and set 6 bpc as default to
work around this issue.

Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Gustavo Padovan <gustavo@padovan.org>
Cc: Cooper Chiou <cooper.chiou@intel.com>
Signed-off-by: Lee, Shawn C <shawn.c.lee@intel.com>>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1540792173-7288-1-git-send-email-shawn.c.lee@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

um: Give start_idle_thread() a return code

[ Upstream commit 7ff1e34bbdc15acab823b1ee4240e94623d50ee8 ]

Fixes:
arch/um/os-Linux/skas/process.c:613:1: warning: control reaches end of
non-void function [-Wreturn-type]

longjmp() never returns but gcc still warns that the end of the function
can be reached.
Add a return code and debug aid to detect this impossible case.

Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>

hfsplus: prevent btree data loss on root split

[ Upstream commit 0a3021d4f5295aa073c7bf5c5e4de60a2e292578 ]

Creating, renaming or deleting a file may cause catalog corruption and
data loss.  This bug is randomly triggered by xfstests generic/027, but
here is a faster reproducer:

  truncate -s 50M fs.iso
  mkfs.hfsplus fs.iso
  mount fs.iso /mnt
  i=100
  while [ $i -le 150 ]; do
    touch /mnt/$i &>/dev/null
    ((++i))
  done
  i=100
  while [ $i -le 150 ]; do
    mv /mnt/$i /mnt/$(perl -e "print $i x82") &>/dev/null
    ((++i))
  done
  umount /mnt
  fsck.hfsplus -n fs.iso

The bug is triggered whenever hfs_brec_update_parent() needs to split the
root node.  The height of the btree is not increased, which leaves the new
node orphaned and its records lost.

Link: http://lkml.kernel.org/r/26d882184fc43043a810114258f45277752186c7.1535682461.git.ernesto.mnd.fernandez@gmail.com
Signed-off-by: Ernesto A. Fernández <ernesto.mnd.fernandez@gmail.com>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

hfs: prevent btree data loss on root split

[ Upstream commit d057c036672f33d43a5f7344acbb08cf3a8a0c09 ]

This bug is triggered whenever hfs_brec_update_parent() needs to split
the root node.  The height of the btree is not increased, which leaves
the new node orphaned and its records lost.  It is not possible for this
to happen on a valid hfs filesystem because the index nodes have fixed
length keys.

For reasons I ignore, the hfs module does have support for a number of
hfsplus features.  A corrupt btree header may report variable length
keys and trigger this bug, so it's better to fix it.

Link: http://lkml.kernel.org/r/9750b1415685c4adca10766895f6d5ef12babdb0.1535682463.git.ernesto.mnd.fernandez@gmail.com
Signed-off-by: Ernesto A. Fernández <ernesto.mnd.fernandez@gmail.com>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

reiserfs: propagate errors from fill_with_dentries() properly

[ Upstream commit b10298d56c9623f9b173f19959732d3184b35f4f ]

fill_with_dentries() failed to propagate errors up to
reiserfs_for_each_xattr() properly.  Plumb them through.

Note that reiserfs_for_each_xattr() is only used by
reiserfs_delete_xattrs() and reiserfs_chown_xattrs().  The result of
reiserfs_delete_xattrs() is discarded anyway, the only difference there is
whether a warning is printed to dmesg.  The result of
reiserfs_chown_xattrs() does matter because it can block chowning of the
file to which the xattrs belong; but either way, the resulting state can
have misaligned ownership, so my patch doesn't improve things greatly.

Credit for making me look at this code goes to Al Viro, who pointed out
that the ->actor calling convention is suboptimal and should be changed.

Link: http://lkml.kernel.org/r/20180802163335.83312-1-jannh@google.com
Signed-off-by: Jann Horn <jannh@google.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Jeff Mahoney <jeffm@suse.com>
Cc: Eric Biggers <ebiggers@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cifs: don't dereference smb_file_target before null check

[ Upstream commit 8c6c9bed8773375b1d54ccca2911ec892c59db5d ]

There is a null check on dst_file->private data which suggests
it can be potentially null. However, before this check, pointer
smb_file_target is derived from dst_file->private and dereferenced
in the call to tlink_tcon, hence there is a potential null pointer
deference.

Fix this by assigning smb_file_target and target_tcon after the
null pointer sanity checks.

Detected by CoverityScan, CID#1475302 ("Dereference before null check")

Fixes: 04b38d601239 ("vfs: pull btrfs clone API to vfs layer")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Linux 4.9.140

Revert "ipv6: set rt6i_protocol properly in the route when it is installed"

This reverts commit 23e983e27aaff6357bb851d91b593d83a9a6552c which is
commit b91d532928dff2141ea9c107c3e73104d9843767 upstream.

It breaks the Android networking test suite, which works fine with the
backported patch in 4.14.  So something must be off for 4.9 for this
patch, so just revert it.

Cc: Jianlin Shi <jishi@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Xin Long <lucien.xin@gmail.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>