Xiaofei Tan [Tue, 24 Oct 2017 15:51:47 +0000 (23:51 +0800)]
scsi: hisi_sas: complete all tasklets prior to host reset
The CQ event is handled in tasklet context, and it could be delayed if
the system loading is high.
It is possible to run into some problems when executing a host reset
when cq_tasklet_vx_hw() is being executed.
So, prior to host reset, execute tasklet_kill() to ensure that all CQ
tasklets are complete.
Besides, as the function hisi_sas_wait_tasklets_done() is added to do
tasklet_kill(), this patch refactors some code where tasklet_kill() is
used.
Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Xiang Chen [Tue, 24 Oct 2017 15:51:46 +0000 (23:51 +0800)]
scsi: hisi_sas: fix a bug when free device for v3 hw
Use completion to wait on ITCT CLR interrupt finishing before
processing other things when freeing a device.
This is safer than the pre-existing process of polling the register.
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Xiaofei Tan [Tue, 24 Oct 2017 15:51:45 +0000 (23:51 +0800)]
scsi: hisi_sas: add hisi_hba.rst_work init for v3 hw
Add init code of hisi_hba->rst_work for v3 hw. Because v3 hw also need
it to recover controller when some hw errors occurs.
Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Xiaofei Tan [Tue, 24 Oct 2017 15:51:44 +0000 (23:51 +0800)]
scsi: hisi_sas: add v3 hw DFX feature
Realise get_events() to add DFX feature for v3 hw. Just like v2 hw, We
support the following errors:
- loss_of_dword_sync_count
- invalid_dword_count
- phy_reset_problem_count
- running_disparity_error_count
Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Xiaofei Tan [Tue, 24 Oct 2017 15:51:43 +0000 (23:51 +0800)]
scsi: hisi_sas: init connect cfg register for v3 hw
Add initialization of register CON_CFG_DRIVER for v3 hw, to limit
number of the times of setup connection.
Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Xiaofei Tan [Tue, 24 Oct 2017 15:51:42 +0000 (23:51 +0800)]
scsi: hisi_sas: check PHY state in get_wideport_bitmap_v3_hw()
We should check register PHY_STATE when getting the bitmap of a
wideport, as, if the PHY is not ready, the value of register
PHY_PORT_NUM_MA is not valid.
V2 hw has done this check, and v3 hw should do this check too.
Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Shiju Jose [Tue, 24 Oct 2017 15:51:39 +0000 (23:51 +0800)]
scsi: hisi_sas: use array for v2 hw AXI errors
The code to print AXI errors in v2 hw driver is repetitive.
This patch condenses the code by looping an array of errors.
Also, a formatting error in one_bit_ecc_errors[] and
multi_bit_ecc_errors[] is fixed.
Signed-off-by: Shiju Jose <shiju.jose@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Xiaofei Tan [Tue, 24 Oct 2017 15:51:38 +0000 (23:51 +0800)]
scsi: hisi_sas: fix the risk of freeing slot twice
The function hisi_sas_slot_task_free() is used to free the slot and do
tidy-up of LLDD resources. The LLDD generally should know the state of
a slot and decide when to free it, and it should only be done once.
For some scenarios, we really don't know the state, like when TMF
timeout. In this case, we check task->lldd_task before calling
hisi_sas_slot_task_free().
However, we may miss some scenarios when we should also check
task->lldd_task, and it is not SMP safe to check task->lldd_task as we
don't protect it within spin lock.
This patch is to fix this risk of freeing slot twice, as follows:
1. Check task->lldd_task in the hisi_sas_slot_task_free(), and give
up freeing of this time if task->lldd_task is NULL.
2. Set slot->buf to NULL after it is freed.
Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Xiaofei Tan [Tue, 24 Oct 2017 15:51:37 +0000 (23:51 +0800)]
scsi: hisi_sas: fix NULL check in SMP abort task path
This patch adds a NULL check of task->lldd_task before freeing the
slot in SMP path.
This is to guard against the scenario of the slot being freed during
the from the preceding internal abort.
Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Xiang Chen [Tue, 24 Oct 2017 15:51:36 +0000 (23:51 +0800)]
scsi: hisi_sas: us start_phy in PHY_FUNC_LINK_RESET
When a PHY_FUNC_LINK_RESET is issued, we need to fill the transport
identify_frame to SAS controller before the PHYs are enabled.
Without this, we may find that if a PHY which belonged to a wideport
before the reset may generate a new port id.
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Xiang Chen [Tue, 24 Oct 2017 15:51:35 +0000 (23:51 +0800)]
scsi: hisi_sas: fix SATA breakpoint memory size
Currently the size of memory we allocate for SATA breakpoint buffer is
incorrect.
The breakpoint memory size should be as follows: 32 (NCQ tags) * 128 *
2048 (max #devs) = 8MB
Currently we only allocate 0.5MB, but get away with it as we never
have SATA device index > 128 typically.
To conserve precious DMA memory (8MB may not be even available), limit
the number of devices per HBA to 1024, which means 4MB of memory
required for SATA breakpoint.
The 1024 device limit applied to all HW versions. For v3 hw, we need
to configure this value.
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Xiang Chen [Tue, 24 Oct 2017 15:51:34 +0000 (23:51 +0800)]
scsi: hisi_sas: grab hisi_hba.lock when processing slots
When adding/removing slots from device list, we need to lock this
operation with hisi_hba lock for safety.
This patch adds missing instances of this.
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Xiaofei Tan [Tue, 24 Oct 2017 15:51:33 +0000 (23:51 +0800)]
scsi: hisi_sas: use spin_lock_irqsave() for hisi_hba.lock
We used spin_lock() to grab hisi_hba.lock in two places where
spin_lock_irqsave() should be used, as hisi_hba.lock can be taken in
interrupt context.
This patch is to fix this.
Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Xiang Chen [Tue, 24 Oct 2017 15:51:32 +0000 (23:51 +0800)]
scsi: hisi_sas: fix internal abort slot timeout bug
When an internal abort times out in hisi_sas_internal_task_abort(),
goto the exit label in and not go through the other task status
checks.
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Xiang Chen [Tue, 24 Oct 2017 15:51:31 +0000 (23:51 +0800)]
scsi: hisi_sas: delete get_ncq_tag_v3_hw()
We already relocated hisi_sas_get_ncq_tag() into common file main.c,
so delete get_ncq_tag_v3_hw() and use hisi_sas_get_ncq_tag() instead.
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Jeffy Chen [Wed, 25 Oct 2017 07:39:10 +0000 (15:39 +0800)]
scsi: scsi_devinfo: Add scsi_devinfo_tbl.c
Add generated scsi_devinfo_tbl.c into .gitignore.
Fixes:
345e29608b4b ("scsi: scsi: Export blacklist flags to sysfs")
Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Shivasharan S [Thu, 19 Oct 2017 09:49:06 +0000 (02:49 -0700)]
scsi: megaraid_sas: driver version upgrade
Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Shivasharan S [Thu, 19 Oct 2017 09:49:05 +0000 (02:49 -0700)]
scsi: megaraid_sas: Add support for 64bit consistent DMA
The latest MegaRAID Firmware (for Invader series) has support for 64bit
DMA for both streaming and consistent DMA buffers. All Ventura series
controller FW always support 64 bit consistent DMA. Also, on a few
architectures 32bit DMA is not supported.
Current driver always prefers 32bit for consistent DMA and 64bit for
streaming DMA. This behavior was unintentional and carried forwarded
from legacy controller FW. Need to enhance the driver to support 64bit
consistent DMA buffers based on the firmware capability.
Below is the DMA setting strategy in driver with this patch. For
Ventura series, always try to set 64bit DMA mask. If it fails fall back
to 32bit DMA mask. For Invader series and earlier generation
controllers, first try to set to 32bit consistent DMA mask irrespective
of FW capability. This is needed to ensure firmware downgrades do not
break. If 32bit DMA setting fails, check FW capability and try seting to
64bit DMA mask.
There are certain restrictions in the hardware for having all sense
buffers and all reply descriptors to be in the same 4GB memory region.
This limitation is h/w dependent and can not be changed in firmware.
This limitation needs to be taken care in driver while allocating the
buffers. There was a discussion regarding this - find details at below
link. https://www.spinics.net/lists/linux-scsi/msg108251.html
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Shivasharan S [Thu, 19 Oct 2017 09:49:04 +0000 (02:49 -0700)]
scsi: megaraid_sas: Do not limit queue_depth to 1k in non-RDPQ mode
Driver load fails if memory allocation for request frame pool fails due
to the higher queue_depth requirement. The driver now allows dynamically
reducing queue_depth if memory allocations fail rather than failing
load. With this, there is no need to limit queue_depth to 1K.
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Shivasharan S [Thu, 19 Oct 2017 09:49:03 +0000 (02:49 -0700)]
scsi: megaraid_sas: Retry with reduced queue depth when alloc fails for higher QD
In certain cases, the host memory is limited and with FW supporting
higher queue depths there are increasing chances of IO request frame
allocation failures that we are seeing. In case of request frame
allocation failures, retry allocation with reduced queue depth (in steps
of 64) to continue to configure the controller with a reduced
performance rather than failing load.
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Shivasharan S [Thu, 19 Oct 2017 09:49:02 +0000 (02:49 -0700)]
scsi: megaraid_sas: Incorrect processing of IOCTL frames for SMP/STP commands
cmd->frame->dcmd.opcode will be valid only for MFI_CMD_DCMD
IOCTL frames. Currently driver check for cmd->frame->dcmd.opcode without
checking cmd type. Ensure we check dcmd opcode only for MFI_CMD_DCMD
commands. Separate handling of MFI_CMD_SMP/STP commands from
MFI_CMD_DCMD in completion path.
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Shivasharan S [Thu, 19 Oct 2017 09:49:01 +0000 (02:49 -0700)]
scsi: megaraid_sas: Resize MFA frame used for IOC INIT to 4k
Older firmware version unconditionally pulls 4k frame for IOC INIT MFA
frame. But driver allocates 1k or 4k max_chain_frame_sz based on FW
capability. During boot time, this results in DMA read errors.
Workaround fix in driver by allocating separate ioc_init frame of 4k
size to support older firmware.
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com>
Cc: stable@vger.kernel.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Shivasharan S [Thu, 19 Oct 2017 09:49:00 +0000 (02:49 -0700)]
scsi: megaraid_sas: Update current host time to FW during IOC Init
Driver needs to send current host time to firmware during init.
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Shivasharan S [Thu, 19 Oct 2017 09:48:59 +0000 (02:48 -0700)]
scsi: megaraid_sas: Move controller memory allocations and DMA mask settings from probe to megasas_init_fw
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Shivasharan S [Thu, 19 Oct 2017 09:48:58 +0000 (02:48 -0700)]
scsi: megaraid_sas: Move initialization of instance parameters inside newly created function megasas_init_ctrl_params
Code refactoring, no functional change. Create new function to
initialize all the controller parameters during load time.
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Shivasharan S [Thu, 19 Oct 2017 09:48:57 +0000 (02:48 -0700)]
scsi: megaraid_sas: remove instance->ctrl_info
Re-use the pre-allocated ctrl_info DMA buffer.
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Shivasharan S [Thu, 19 Oct 2017 09:48:56 +0000 (02:48 -0700)]
scsi: megaraid_sas: Pre-allocate frequently used DMA buffers
Pre-allocate few of the frequently used DMA buffers during load time.
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Shivasharan S [Thu, 19 Oct 2017 09:48:55 +0000 (02:48 -0700)]
scsi: megaraid_sas: Create separate functions for allocating and freeing controller DMA buffers
Code refactoring - create separate functions to allocate and free
controller DMA buffers
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Shivasharan S [Thu, 19 Oct 2017 09:48:54 +0000 (02:48 -0700)]
scsi: megaraid_sas: Create separate functions to allocate ctrl memory
No functional change. Code refactoring to improve readability. Move the
code to allocate and free controller memory into separate functions.
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Shivasharan S [Thu, 19 Oct 2017 09:48:53 +0000 (02:48 -0700)]
scsi: megaraid_sas: reduce size of fusion_context and use kmalloc for allocation
fusion_context structure is very large around 180kB and most of the size
is contributed by log_to_span array. Move log_to_span out of fusion
context and have separate allocation for log_to_span. And use kmalloc to
allocate fusion_context. Currently kmemleak reports 1000s of false
positives for fusion->cmd_list[]. kmemleak does not track page
allocation for fusion_context. This change will also fix the false
positives reported by kmemleak.
Ref: https://marc.info/?l=linux-scsi&m=
150545293900917
Reported-by: Shu Wang <shuwang@redhat.com>
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Shivasharan S [Thu, 19 Oct 2017 09:48:52 +0000 (02:48 -0700)]
scsi: megaraid_sas: replace is_ventura with adapter_type checks
No functional change.
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Shivasharan S [Thu, 19 Oct 2017 09:48:51 +0000 (02:48 -0700)]
scsi: megaraid_sas: Remove redundant checks for ctrl_context
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Shivasharan S [Thu, 19 Oct 2017 09:48:50 +0000 (02:48 -0700)]
scsi: megaraid_sas: replace instance->ctrl_context checks with instance->adapter_type
Increase code readability. No functional change.
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Shivasharan S [Thu, 19 Oct 2017 09:48:49 +0000 (02:48 -0700)]
scsi: megaraid_sas: Add support for Crusader controllers
Add support for PCI VID/DID 0x1000/0x0015 based MegaRAID controllers.
Since the DID 0x0015 conflicts with DELL PERC5 controllers,
add vendor ID based check specific for DELL PERC5.
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Shivasharan S [Thu, 19 Oct 2017 09:48:48 +0000 (02:48 -0700)]
scsi: megaraid_sas: use adapter_type for all gen controllers
No functional change.
Refactor adapter_type to set for all generation controllers, not
just for fusion controllers.
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Don Brace [Fri, 20 Oct 2017 21:52:17 +0000 (16:52 -0500)]
scsi: hpsa: bump driver version
Reviewed-by: Gerry Morong <gerry.morong@microsemi.com>
Reviewed-by: Scott Benesh <scott.benesh@microsemi.com>
Signed-off-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Don Brace [Fri, 20 Oct 2017 21:52:10 +0000 (16:52 -0500)]
scsi: hpsa: add enclosure logical identifier
Add support for enclosure logical identifier
Reviewed-by: Scott Benesh <scott.benesh@microsemi.com>
Reviewed-by: Scott Teel <scott.teel@microsemi.com>
Reviewed-by: Kevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Don Brace [Fri, 20 Oct 2017 21:52:04 +0000 (16:52 -0500)]
scsi: hpsa: correct logical volume removal
Suggested-by: Martin Wilck <mwilck@suse.com>
Reviewed-by: Scott Benesh <scott.benesh@microsemi.com>
Reviewed-by: Scott Teel <scott.teel@microsemi.com>
Reviewed-by: Kevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Don Brace [Fri, 20 Oct 2017 21:51:57 +0000 (16:51 -0500)]
scsi: hpsa: reduce warning messages on device removal
Reviewed-by: Scott Benesh <scott.benesh@microsemi.com>
Reviewed-by: Scott Teel <scott.teel@microsemi.com>
Reviewed-by: Kevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Don Brace [Fri, 20 Oct 2017 21:51:51 +0000 (16:51 -0500)]
scsi: hpsa: update queue depth for externals
Preserve external device queue depth during a scan operation.
Reviewed-by: Scott Benesh <scott.benesh@microsemi.com>
Reviewed-by: Scott Teel <scott.teel@microsemi.com>
Reviewed-by: Kevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Don Brace [Fri, 20 Oct 2017 21:51:45 +0000 (16:51 -0500)]
scsi: hpsa: correct smart path enabled
Correct re-enabling ioaccel after:
1) RAID transformations and
2) multi-path fail-overs.
Reviewed-by: Scott Benesh <scott.benesh@microsemi.com>
Reviewed-by: Scott Teel <scott.teel@microsemi.com>
Reviewed-by: Kevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Don Brace [Fri, 20 Oct 2017 21:51:38 +0000 (16:51 -0500)]
scsi: hpsa: change timeout for internal cmds
There are times when the DEFAULT_TIMEOUT (30 seconds) is not enough.
Reviewed-by: Scott Benesh <scott.benesh@microsemi.com>
Reviewed-by: Scott Teel <scott.teel@microsemi.com>
Reviewed-by: Kevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Bader Ali Saleh [Fri, 20 Oct 2017 21:51:32 +0000 (16:51 -0500)]
scsi: hpsa: update discovery polling
Correct a corner case where newly created volumes are not detected
automatically on an external RAID controller that has no configured
volumes during initial device discovery.
The fix is to set the discovery_polling flag when an external RAID
controller is detected. This causes a device rescan every 20-30 seconds,
so that newly created volumes will be detected automatically.
Reviewed-by: Scott Benesh <scott.benesh@microsemi.com>
Reviewed-by: Scott Teel <scott.teel@microsemi.com>
Reviewed-by: Kevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Don Brace [Fri, 20 Oct 2017 21:51:26 +0000 (16:51 -0500)]
scsi: hpsa: add controller checkpoint
Tell hpsa controller to generate a checkpoint for rare lockup
conditions.
Reviewed-by: Scott Benesh <scott.benesh@microsemi.com>
Reviewed-by: Scott Teel <scott.teel@microsemi.com>
Reviewed-by: Kevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Scott Teel [Fri, 20 Oct 2017 21:51:20 +0000 (16:51 -0500)]
scsi: hpsa: clear tmpdevice in scan thread
clean up stale information.
Reviewed-by: Scott Benesh <scott.benesh@microsemi.com>
Reviewed-by: Scott Teel <scott.teel@microsemi.com>
Reviewed-by: Kevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Martin Wilck [Fri, 20 Oct 2017 21:51:14 +0000 (16:51 -0500)]
scsi: hpsa: cleanup sas_phy structures in sysfs when unloading
I am resubmitting this patch on behalf of Martin Wilck with his
permission.
The original patch can be found here:
https://www.spinics.net/lists/linux-scsi/msg102083.html
This patch did not help until Hannes's
commit
9441284fbc39 ("scsi-fixup-kernel-warning-during-rmmod")
was applied to the kernel.
--------------------------------------
Original patch description from Martin:
--------------------------------------
When the hpsa module is unloaded using rmmod, dangling
symlinks remain under /sys/class/sas_phy. Fix this by
calling sas_phy_delete() rather than sas_phy_free (which,
according to comments, should not be called for PHYs that
have been set up successfully, anyway).
Tested-by: Don Brace <don.brace@microsemi.com>
Reviewed-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin Wilck <mwilck@suse.de>
Signed-off-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Martin Wilck [Fri, 20 Oct 2017 21:51:08 +0000 (16:51 -0500)]
scsi: hpsa: destroy sas transport properties before scsi_host
This patch cleans up a lot of warnings when unloading the driver.
A current example of the stack trace starts with:
[ 142.570715] sysfs group 'power' not found for kobject 'port-5:0'
There can be hundreds of these messages during a driver unload.
I am resubmitting this patch on behalf of Martin Wilck with his
permission.
His original patch can be found here:
https://www.spinics.net/lists/linux-scsi/msg102085.html
This patch did not help until Hannes's
commit
9441284fbc39 ("scsi-fixup-kernel-warning-during-rmmod")
was applied to the kernel.
---------------------------
Original patch description:
---------------------------
Unloading the hpsa driver causes warnings
[ 1063.793652] WARNING: CPU: 1 PID: 4850 at ../fs/sysfs/group.c:237 device_del+0x54/0x240()
[ 1063.793659] sysfs group
ffffffff81cf21a0 not found for kobject 'port-2:0'
with two different stacks:
1)
[ 1063.793774] [<
ffffffff81448af4>] device_del+0x54/0x240
[ 1063.793780] [<
ffffffff8145178a>] transport_remove_classdev+0x4a/0x60
[ 1063.793784] [<
ffffffff81451216>] attribute_container_device_trigger+0xa6/0xb0
[ 1063.793802] [<
ffffffffa0105d46>] sas_port_delete+0x126/0x160 [scsi_transport_sas]
[ 1063.793819] [<
ffffffffa036ebcc>] hpsa_free_sas_port+0x3c/0x70 [hpsa]
2)
[ 1063.797103] [<
ffffffff81448af4>] device_del+0x54/0x240
[ 1063.797118] [<
ffffffffa0105d4e>] sas_port_delete+0x12e/0x160 [scsi_transport_sas]
[ 1063.797134] [<
ffffffffa036ebcc>] hpsa_free_sas_port+0x3c/0x70 [hpsa]
This is caused by the fact that host device hostX is deleted before the
SAS transport devices hostX/port-a:b.
This patch fixes this by reverting the order of device deletions.
Tested-by: Don Brace <don.brace@microsemi.com>
Reviewed-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin Wilck <mwilck@suse.de>
Signed-off-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Don Brace [Fri, 20 Oct 2017 19:11:51 +0000 (14:11 -0500)]
scsi: smartpqi: correct spelling error in documentation
Correct spelling error.
Signed-off-by: Kevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Martin K. Petersen [Thu, 19 Oct 2017 14:20:03 +0000 (10:20 -0400)]
scsi: Clarify SCSI core module parameter documentation
Ever since it became possible to compile the SCSI core code as a module,
the documentation describing the module parameters has been incorrect.
Update the documentation to add a "scsi_mod." prefix to the relevant
options.
Reported-by: Laurence Oberman <loberman@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Viswas G [Wed, 18 Oct 2017 06:09:15 +0000 (11:39 +0530)]
scsi: pm80xx: corrected linkrate value.
Corrected the value defined for LINKRATE_60 (6 Gig).
Signed-off-by: Raj Dinesh <Raj.Dinesh@microsemi.com>
Signed-off-by: Viswas G <viswas.g@microsemi.com>
Acked-by: Jack Wang <jinpu.wang@profitbricks.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Viswas G [Wed, 18 Oct 2017 06:09:14 +0000 (11:39 +0530)]
scsi: pm80xx: panic on ncq error cleaning up the read log.
when there's an error in 'ncq mode' the host has to read the ncq error
log (10h) to clear the error state. however, the ccb that is setup for
doing this doesn't setup the ccb so that the previous state is
cleared. if the ccb was previously used for an IO n_elems is set and
pm8001_ccb_task_free() treats this as the signal to go free a
scatter-gather list (that's already been freed).
Signed-off-by: Deepak Ukey <deepak.ukey@microsemi.com>
Signed-off-by: Viswas G <Viswas.G@microsemi.com>
Acked-by: Jack Wang <jinpu.wang@profitbricks.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Viswas G [Wed, 18 Oct 2017 06:09:13 +0000 (11:39 +0530)]
scsi: pm80xx: corrected SATA abort handling sequence.
Modified SATA abort handling with following steps:
1) Set device state as recovery.
2) Send phy reset.
3) Wait for reset completion.
4) After successful reset, abort all IO's to the device.
5) After aborting all IO's to device, set device state as operational.
Signed-off-by: Deepak Ukey <deepak.ukey@microsemi.com>
Signed-off-by: Viswas G <Viswas.G@microsemi.com>
Acked-by: Jack Wang <jinpu.wang@profitbricks.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Viswas G [Wed, 18 Oct 2017 06:09:12 +0000 (11:39 +0530)]
scsi: pm80xx: modified port reset timer value for PM8006 card
Added port reset timer value as 2000ms for PM8006 sata controller.
Signed-off-by: Deepak Ukey <deepak.ukey@microsemi.com>
Signed-off-by: Viswas G <Viswas.G@microsemi.com>
Acked-by: Jack Wang <jinpu.wang@profitbricks.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Viswas G [Wed, 18 Oct 2017 06:09:11 +0000 (11:39 +0530)]
scsi: pm80xx: cleanup in pm8001_abort_task function.
Signed-off-by: Deepak Ukey <deepak.ukey@microsemi.com>
Signed-off-by: Viswas G <Viswas.G@microsemi.com>
Acked-by: Jack Wang <jinpu.wang@profitbricks.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Viswas G [Wed, 18 Oct 2017 06:09:10 +0000 (11:39 +0530)]
scsi: pm80xx: tag allocation for phy control request.
tag is taken from the tag pool instead of using the hardcoded tag
value(1).
Signed-off-by: Deepak Ukey <deepak.ukey@microsemi.com>
Signed-off-by: Viswas G <Viswas.G@microsemi.com>
Acked-by: Jack Wang <jinpu.wang@profitbricks.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Viswas G [Wed, 18 Oct 2017 06:09:09 +0000 (11:39 +0530)]
scsi: pm80xx: Different SAS addresses for phys.
Different SAS addresses are assigned for each set of phys.
Signed-off-by: Viswas G <Viswas.G@microsemi.com>
Acked-by: Jack Wang <jinpu.wang@profitbricks.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Viswas G [Wed, 18 Oct 2017 06:09:08 +0000 (11:39 +0530)]
scsi: pm80xx: ILA and inactive firmware version through sysfs
Added support to read ILA version and inactive firmware version from MPI
configuration table and export through sysfs.
Signed-off-by: Deepak Ukey <deepak.ukey@microsemi.com>
Signed-off-by: Viswas G <Viswas.G@microsemi.com>
Acked-by: Jack Wang <jinpu.wang@profitbricks.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Viswas G [Wed, 18 Oct 2017 06:09:07 +0000 (11:39 +0530)]
scsi: pm80xx: redefine sas_identify_frame structure
sas_identify structure defined by pm80xx doesn't have CRC field. So
added a new sas_identify structure without CRC.
Signed-off-by: Raj Dinesh <Raj.Dinesh@microsemi.com>
Signed-off-by: Viswas G <Viswas.G@microsemi.com>
Acked-by: Jack Wang <jinpu.wang@profitbricks.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Hannes Reinecke [Tue, 17 Oct 2017 07:11:24 +0000 (09:11 +0200)]
scsi: scsi_error: Handle power-on reset unit attention
As per SAM there is a status precedence, with any sense code 29/XX
taking second place just after an ACA ACTIVE status. Additionally, each
target might prefer to not queue any unit attention conditions, but just
report one. Due to the above, this will be that one with the highest
precedence. This results in the sense code 29/XX effectively
overwriting any other unit attention. Hence we should report the
power-on reset to userland so that it can take appropriate action.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Hannes Reinecke [Tue, 17 Oct 2017 07:10:56 +0000 (09:10 +0200)]
scsi: scsi_error: Do not retry illegal function error
Hitachi USP-V returns 'ILLEGAL FUNCTION' when the internal staging
mechanism encountered an error. These errors should not be retried on
another path.
[mkp: s/invalid/illegal/]
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Kurt Garloff [Tue, 17 Oct 2017 07:10:45 +0000 (09:10 +0200)]
scsi: scsi_devinfo: Add REPORTLUN2 to EMC SYMMETRIX blacklist entry
All EMC SYMMETRIX support REPORT_LUNS, even if configured to report
SCSI-2 for whatever reason.
Signed-off-by: Kurt Garloff <garloff@suse.de>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Hannes Reinecke [Tue, 17 Oct 2017 07:10:33 +0000 (09:10 +0200)]
scsi: scsi_devinfo: Add TRY_VPD_PAGES to HITACHI OPEN-V blacklist entry
HITACHI is always supporting VPD pages, even though it's claiming to
support SCSI Revision 3 only.
Signed-off-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Hannes Reinecke [Tue, 17 Oct 2017 07:10:26 +0000 (09:10 +0200)]
scsi: scsi_devinfo: Add 'AIX VDASD' to blacklist
The AIX VDASD devices do support VPD pages, but implement only SPC. So
set BLIST_TRY_VPD_PAGES to correctly display the VPD information in
sysfs.
[mkp: typo]
Signed-off-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
weiping zhang [Thu, 12 Oct 2017 06:57:06 +0000 (14:57 +0800)]
scsi: sd: change manage_start_stop to bool in sysfs interface
/sys/class/scsi_disk/0:2:0:0/manage_start_stop can be changed to 0
unexpectly by writing an invalid string.
Signed-off-by: weiping zhang <zhangweiping@didichuxing.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
weiping zhang [Thu, 12 Oct 2017 06:56:44 +0000 (14:56 +0800)]
scsi: sd: change allow_restart to bool in sysfs interface
/sys/class/scsi_disk/0:2:0:0/allow_restart can be changed to 0
unexpectedly by writing an invalid string such as the following:
echo asdf > /sys/class/scsi_disk/0:2:0:0/allow_restart
Signed-off-by: weiping zhang <zhangweiping@didichuxing.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Hannes Reinecke [Mon, 2 Oct 2017 14:26:37 +0000 (16:26 +0200)]
scsi: scsi_devinfo: fixup string compare
When checking the model and vendor string we need to use the minimum
value of either string, otherwise we'll miss out on wildcard matches.
And we should take care when matching with zero size strings; results
might be unpredictable. With this patch the rules for matching devinfo
strings are as follows:
- Vendor strings must match exactly
- Empty Model strings will only match if the devinfo model
is also empty
- Model strings shorter than the devinfo model string will
not match
Fixes: 5e7ff2c ("SCSI: fix new bug in scsi_dev_info_list string matching")
Signed-off-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Hannes Reinecke [Mon, 2 Oct 2017 14:26:36 +0000 (16:26 +0200)]
scsi: scsi_devinfo: Whitespace fixes
Signed-off-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Hannes Reinecke [Mon, 2 Oct 2017 14:26:35 +0000 (16:26 +0200)]
scsi: scsi_devinfo: Reformat blacklist flags
Reformat blacklist flags to make the values easier to read and to
enhance error checking.
Signed-off-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Bart van Assche <bart.vanassche@wdc.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Hannes Reinecke [Mon, 2 Oct 2017 14:26:34 +0000 (16:26 +0200)]
scsi: scsi: Export blacklist flags to sysfs
Each scsi device is scanned according to the found blacklist flags, but
this information is never presented to sysfs. This makes it quite hard
to figure out if blacklisting worked as expected. With this patch we're
exporting an additional attribute 'blacklist' containing the blacklist
flags for this device.
Signed-off-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Hannes Reinecke [Mon, 2 Oct 2017 14:26:33 +0000 (16:26 +0200)]
scsi: scsi_debug: allow to specify inquiry vendor and model
For testing purposes we need to be able to pass in the inquiry vendor
and model.
Signed-off-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Acked-by: Doug Gilbert <dgilbert@interlog.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Damien Le Moal [Tue, 10 Oct 2017 20:54:25 +0000 (05:54 +0900)]
scsi: sd_zbc: Fix sd_zbc_read_zoned_characteristics()
The three values starting at byte 8 of the Zoned Block Device
Characteristics VPD page B6h are 32 bits values, not 64bits. So use
get_unaligned_be32() to retrieve the values and not get_unaligned_be64()
Fixes:
89d947561077 ("sd: Implement support for ZBC devices")
Cc: <stable@vger.kernel.org>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Bart Van Assche <Bart.VanAssche@wdc.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Damien Le Moal [Tue, 10 Oct 2017 20:54:24 +0000 (05:54 +0900)]
scsi: sd_zbc: Use well defined macros
Instead of open coding, use the min() macro to calculate a report zones
reply buffer length in sd_zbc_check_zone_size() and the round_up() macro
for calculating the number of zones in sd_zbc_setup().
No functional change is introduced by this patch.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Damien Le Moal [Tue, 10 Oct 2017 20:54:23 +0000 (05:54 +0900)]
scsi: sd_zbc: Rearrange code
Rearrange sd_zbc_setup() to include use_16_for_rw and use_10_for_rw
assignments and move the calculation of sdkp->zone_shift together with
the assignment of the verified zone_blocks value in
sd_zbc_check_zone_size().
No functional change is introduced by this patch.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <Bart.VanAssche@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Damien Le Moal [Tue, 10 Oct 2017 20:54:22 +0000 (05:54 +0900)]
scsi: sd_zbc: Fix comments and indentation
Fix comments style (use kernel-doc style) and content to clarify some
functions. Also fix some functions signature indentation and remove a
useless blank line in sd_zbc_read_zones().
No functional change is introduced by this patch.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Damien Le Moal [Tue, 10 Oct 2017 20:54:21 +0000 (05:54 +0900)]
scsi: sd_zbc: Move ZBC declarations to scsi_proto.h
Move standard macro definitions for the zone types and zone conditions
to scsi_proto.h together with the definitions related to the REPORT
ZONES command. While at it, define all values in the enums to be clear.
Also remove unnecessary includes in sd_zbc.c.
No functional change is introduced by this patch.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Bart Van Assche <Bart.VanAssche@wdc.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Christoph Hellwig [Tue, 3 Oct 2017 10:48:40 +0000 (12:48 +0200)]
scsi: qla2xxx: don't break the bsg-lib abstractions
Always use bsg_job->reply instead of scsi_req(bsg_job->req)->sense), as
they always point to the same memory.
Never set scsi_req(bsg_job->req)->result and we'll set that value
through bsg_job_done.
[mkp: applied by hand, fixed whitespace]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Tested-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Christoph Hellwig [Tue, 3 Oct 2017 10:48:41 +0000 (12:48 +0200)]
scsi: scsi_transport_sas: check reply payload length instead of bidi request
As a user of bsg-lib the SAS transport should not poke into request
internals but use the bsg_job fields instead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Christoph Hellwig [Tue, 3 Oct 2017 10:48:39 +0000 (12:48 +0200)]
scsi: libfc: don't assign resid_len in fc_lport_bsg_request
bsg_job_done takes care of updating the scsi_request structure fields.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Christoph Hellwig [Tue, 3 Oct 2017 10:48:38 +0000 (12:48 +0200)]
scsi: bfa: don't reset max_segments for every bsg request
We already support 256 or more segments as long as the architecture
supports SG chaining (all the ones that matter do), so removed the weird
playing with limits from the job handler.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Christos Gkekas [Sat, 14 Oct 2017 12:17:58 +0000 (13:17 +0100)]
scsi: qedi: Delete redundant variables
Remove redundant variables in quedi_fw.c that are set but not used.
Signed-off-by: Christos Gkekas <chris.gekas@gmail.com>
Acked-by: Manish Rangankar <Manish.Rangankar@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Giridhar Malavali [Fri, 13 Oct 2017 22:43:23 +0000 (15:43 -0700)]
scsi: qla2xxx: Query FC4 type during RSCN processing
Based on the FC4 type, login will proceed to either FCP or FC-NVMe
remote ports.
Signed-off-by: Giridhar Malavali <giridhar.malavali@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Himanshu Madhani [Fri, 13 Oct 2017 22:43:22 +0000 (15:43 -0700)]
scsi: qla2xxx: Use ql2xnvmeenable to enable Q-Pair for FC-NVMe
In some environments, user can choose to not enable SCSI-MQ but wants to
use FC-NVMe feature of the driver. Since driver relies on Q-Pairs to
allocate FC-NVMe resources, use existing module parameter to create
Q-Pairs when FC-NVMe is enabled.
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Himanshu Madhani [Fri, 13 Oct 2017 16:34:07 +0000 (09:34 -0700)]
scsi: qla2xxx: Update driver version to 10.00.00.02-k
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Duane Grigsby [Fri, 13 Oct 2017 16:34:06 +0000 (09:34 -0700)]
scsi: qla2xxx: Changes to support N2N logins
If we discovered a topology that is N2N then we will issue a login to
the target. If our WWPN is bigger than the target's WWPN then we will
initiate login, otherwise we will just wait for the target to initiate
login.
[mkp: many whitespace errors]
Signed-off-by: Duane Grigsby <duane.grigsby@cavium.com>
Signed-off-by: Michael Hernandez <michael.hernandez@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Tested-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Duane Grigsby [Fri, 13 Oct 2017 16:34:05 +0000 (09:34 -0700)]
scsi: qla2xxx: Allow MBC_GET_PORT_DATABASE to query and save the port states
The MBC_GET_PORT_DATABASE command normally checks the port state
information. This patch allows it to save that info in the fcport
structure and ignore the check if the query flag is set.
[mkp: typo]
Signed-off-by: Duane Grigsby <duane.grigsby@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Himanshu Madhani [Fri, 13 Oct 2017 16:34:04 +0000 (09:34 -0700)]
scsi: qla2xxx: Add ATIO-Q processing for INTx mode
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Himanshu Madhani [Fri, 13 Oct 2017 16:34:03 +0000 (09:34 -0700)]
scsi: qla2xxx: Reinstate module parameter ql2xenablemsix
[mkp: fixed whitespace]
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Dan Carpenter [Thu, 12 Oct 2017 20:30:57 +0000 (23:30 +0300)]
scsi: lpfc: Fix a precedence bug in lpfc_nvme_io_cmd_wqe_cmpl()
The ! has higher precedence than the & operation. I've added
parenthesis so this works as intended.
Fixes:
952c303b329c ("scsi: lpfc: Ensure io aborts interlocked with the target.")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Colin Ian King [Thu, 5 Oct 2017 12:01:53 +0000 (13:01 +0100)]
scsi: aic7xxx: make a couple of functions static
Functions ahc_devlimited_syncrate and ahc_linux_initialize_scsi_bus are
declared static in their prototypes but are missing in their
definitions, so add the missing static.
Cleans up sparse warnings: symbol 'ahc_devlimited_syncrate' was not
declared. Should it be static? symbol 'ahc_linux_initialize_scsi_bus'
was not declared. Should it be static?
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Arnd Bergmann [Tue, 5 Sep 2017 07:51:29 +0000 (09:51 +0200)]
scsi: nsp32: fix logic bug in error handling
gcc-8 points out a logic error that has existed since the start of the
git history:
drivers/scsi/nsp32.c: In function 'nsp32_selection_autoscsi':
drivers/scsi/nsp32.c:607:27: error: bitwise comparison always evaluates to false [-Werror=tautological-compare]
if(((phase & BUSMON_BSY) == 1) || (phase & BUSMON_SEL) == 1) {
^~
Presumably the author intended to check if one of two bits was set, so
that's what I'm changing the code to. This will obviously change the
behavior of the code, hopefully to do the right thing, but I have not
tested this or checked if the new "(phase & BUSMON_BSY) || (phase &
BUSMON_SEL)" condition should indeed be treated as a fatal error.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: GOTO Masanori <gotom@debian.or.jp>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Dan Carpenter [Wed, 4 Oct 2017 07:50:37 +0000 (10:50 +0300)]
scsi: bfa: integer overflow in debugfs
We could allocate less memory than intended because we do:
bfad->regdata = kzalloc(len << 2, GFP_KERNEL);
The shift can overflow leading to a crash. This is debugfs code so the
impact is very small. I fixed the network version of this in March with
commit
13e2d5187f6b ("bna: integer overflow bug in debugfs").
Fixes:
ab2a9ba189e8 ("[SCSI] bfa: add debugfs support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Varun Prakash [Wed, 11 Oct 2017 14:03:21 +0000 (19:33 +0530)]
scsi: libcxgbi: simplify task->hdr allocation for mgmt cmds
In case of mgmt cmds, task->hdr is dereferenced after transmitting the
pdu in iscsi_tcp_task_xmit(). To handle this case current code
increments the Tx skb reference count and frees the skb in
cxgbi_cleanup_task(). In some error cases this results in skb leak.
To fix this in case of mgmt cmds, allocate a separate buffer for iSCSI
hdr and free this buffer in cxgbi_cleanup_task().
Signed-off-by: Varun Prakash <varun@chelsio.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Varun Prakash [Wed, 11 Oct 2017 14:03:07 +0000 (19:33 +0530)]
scsi: cxgb4i: fix Tx skb leak
In case of connection reset Tx skb queue can have some skbs which are
not transmitted so purge Tx skb queue in release_offload_resources() to
avoid skb leak.
Signed-off-by: Varun Prakash <varun@chelsio.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Varun Prakash [Tue, 10 Oct 2017 13:55:30 +0000 (19:25 +0530)]
scsi: libcxgbi: in case of vlan pass 0 as ifindex to find route
In case of vlan pass 0 as ifindex to find route instead of passing
real_dev ifindex, if we pass real_dev ifindex then
ip_route_output_ports() and ip6_route_output() will check for route
through real_dev not through vlan interface.
Signed-off-by: Varun Prakash <varun@chelsio.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Randy Dunlap [Wed, 11 Oct 2017 17:09:23 +0000 (10:09 -0700)]
scsi: update description of logging_level bits
Update the description of 'scsi_logging_level' from 8 4-bit nibbles to
the (pre-git) reality of 10 3-bit bitfields.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Kyle Fortin <kyle.fortin@oracle.com>
Reviewed-by: Steffen Maier <maier@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Randy Dunlap [Wed, 11 Oct 2017 00:16:26 +0000 (17:16 -0700)]
scsi: fix doc. typo for I2O
Fix typo: I20 should be I2O.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Jitendra Bhivare [Tue, 10 Oct 2017 10:48:20 +0000 (16:18 +0530)]
scsi: be2iscsi: Update driver version
Version 11.4.0.1
Signed-off-by: Jitendra Bhivare <jitendra.bhivare@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Jitendra Bhivare [Tue, 10 Oct 2017 10:48:19 +0000 (16:18 +0530)]
scsi: be2iscsi: Remove A-circumflex character in copyright marking
Signed-off-by: Jitendra Bhivare <jitendra.bhivare@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Jitendra Bhivare [Tue, 10 Oct 2017 10:48:18 +0000 (16:18 +0530)]
scsi: be2iscsi: Fix misc static analysis errors
The patch fixes errors reported by tools like smatch:
- removes unused structure fields
- removes dead code
- fixes code identation
Signed-off-by: Jitendra Bhivare <jitendra.bhivare@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Jitendra Bhivare [Tue, 10 Oct 2017 10:48:17 +0000 (16:18 +0530)]
scsi: be2iscsi: Add cmd to set host data
Provide driver version in host data to FW.
Signed-off-by: Jitendra Bhivare <jitendra.bhivare@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>