Matthew Auld [Tue, 15 Mar 2022 18:14:19 +0000 (18:14 +0000)]
drm/i915/lmem: don't treat small BAR as an error
Just pass along the probed io_size. The backend should be able to
utilize the entire range here, even if some of it is non-mappable.
It does leave open with what to do with stolen local-memory.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220315181425.576828-1-matthew.auld@intel.com
Matt Roper [Mon, 14 Mar 2022 23:42:03 +0000 (16:42 -0700)]
drm/i915: Add support for steered register writes
Upcoming patches will need to steer writes to multicast registers as
well as reading them.
Although the setting of the 'multicast' bit should only really matter
for write operations (reads always operate in a unicast manner and give
us the result from one specific instance), Wa_22013088509 suggests that
we leave the multicast bit enabled when performing read operations, so
we follow suit here.
Cc: Harish Chegondi <harish.chegondi@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220314234203.799268-4-matthew.d.roper@intel.com
Daniele Ceraolo Spurio [Mon, 14 Mar 2022 23:42:02 +0000 (16:42 -0700)]
drm/i915/guc: add steering info to GuC register save/restore list
GuC has its own steering mechanism and can't use the default set by i915,
so we need to provide the steering information that the FW will need to
save/restore registers while processing an engine reset. The GUC
interface allows us to do so as part of the register save/restore list
and it requires us to specify the steering for all multicast register, even
those that would be covered by the default setting for cpu access. Given
that we do not distinguish between registers that do not need steering and
registers that are guaranteed to work the default steering, we set the
steering for all entries in the guc list that do not require a special
steering (e.g. mslice) to the default settings; this will cost us a few
extra writes during engine reset but allows us to keep the steering
logic simple.
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220314234203.799268-3-matthew.d.roper@intel.com
Matt Roper [Tue, 15 Mar 2022 17:02:50 +0000 (10:02 -0700)]
drm/i915: Report steering details in debugfs
Add a new 'steering' node in each gt's debugfs directory that tells
whether we're using explicit steering for various types of MCR ranges
and, if so, what MMIO ranges it applies to.
We're going to be transitioning away from implicit steering, even for
slice/dss steering soon, so the information reported here will become
increasingly valuable once that happens.
v2:
- Adding missing 'static' on intel_steering_types[] (Jose, sparse)
v3:
- "static const char *" -> "static const char * const" (sparse)
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220315170250.954380-1-matthew.d.roper@intel.com
John Harrison [Tue, 15 Mar 2022 02:08:05 +0000 (19:08 -0700)]
drm/i915: Reduce stack usage in debugfs due to SSEU
sseu_dev_info is already a pretty large structure which will likely
continue to grow when future platforms increase potential DSS and EU
counts. Let's switch the stack placement of this structure in debugfs
with a dynamic allocation.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220315020805.844962-1-matthew.d.roper@intel.com
Matt Roper [Fri, 11 Mar 2022 22:54:59 +0000 (14:54 -0800)]
drm/i915/xehp: Update topology dumps for Xe_HP
When running on Xe_HP or beyond, let's use an updated format for
describing topology in our error state dumps and debugfs to give a
more accurate view of the hardware:
- Just report DSS directly without the legacy "slice0" output that's no
longer meaningful.
- Indicate whether each DSS is accessible for geometry and/or compute.
- Rename "rcs_topology" to "sseu_topology" since the information
reported is common to both RCS and CCS engines now.
v2:
- Name static functions in a more consistent manner. (Lucas)
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220311225459.385515-2-matthew.d.roper@intel.com
Matt Roper [Fri, 11 Mar 2022 22:54:58 +0000 (14:54 -0800)]
drm/i915/sseu: Don't overallocate subslice storage
Xe_HP removed "slice" as a first-class unit in the hardware design.
Instead we now have a single pool of subslices (which are now referred
to as "DSS") that different hardware units have different ways of
grouping ("compute slices," "geometry slices," etc.). For the purposes
of topology representation, we treat Xe_HP-based platforms as having a
single slice that contains all of the platform's DSS. There's no need
to allocate storage space for (max legacy slices * max dss); let's
update some of our macros to minimize the storage requirement for sseu
topology. We'll also document some of the constants to make it a little
bit more clear what they represent.
v2:
- s/LEGACY/HSW/ in macro names. (Lucas)
- Rename MAX() to SSEU_MAX() to avoid any potential clashes with other
definitions elsewhere. Unfortunately max()/max_t() from
linux/minmax.h cannot be used in this context. (Lucas)
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220311225459.385515-1-matthew.d.roper@intel.com
Matt Roper [Fri, 11 Mar 2022 06:28:35 +0000 (22:28 -0800)]
drm/i915/gt: Remove GEN12_SFC_DONE_MAX from register defs header
We shouldn't really be keeping track of how many SFC_DONE registers
our platforms can have, but rather how many SFC hardware units there can
be (each SFC unit will have one corresponding SFC_DONE register). So
drop the stray GEN12_SFC_DONE_MAX definition we had in the register
definition file and replace it with an I915_MAX_SFC that follows the
pattern we use for other hardware units. Note that our hardware has a
2:1:1 ratio of VD:VE:SFC, and as far as we know that pattern should
carry forward to future platforms, so we'll define it as #VCS/2.
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220311062835.163744-1-matthew.d.roper@intel.com
Mastan Katragadda [Thu, 3 Mar 2022 06:04:28 +0000 (11:34 +0530)]
drm/i915/gem: add missing boundary check in vm_access
A missing bounds check in vm_access() can lead to an out-of-bounds read
or write in the adjacent memory area, since the len attribute is not
validated before the memcpy later in the function, potentially hitting:
[ 183.637831] BUG: unable to handle page fault for address:
ffffc90000c86000
[ 183.637934] #PF: supervisor read access in kernel mode
[ 183.637997] #PF: error_code(0x0000) - not-present page
[ 183.638059] PGD
100000067 P4D
100000067 PUD
100258067 PMD
106341067 PTE 0
[ 183.638144] Oops: 0000 [#2] PREEMPT SMP NOPTI
[ 183.638201] CPU: 3 PID: 1790 Comm: poc Tainted: G D 5.17.0-rc6-ci-drm-11296+ #1
[ 183.638298] Hardware name: Intel Corporation CoffeeLake Client Platform/CoffeeLake H DDR4 RVP, BIOS CNLSFWR1.R00.X208.B00.
1905301319 05/30/2019
[ 183.638430] RIP: 0010:memcpy_erms+0x6/0x10
[ 183.640213] RSP: 0018:
ffffc90001763d48 EFLAGS:
00010246
[ 183.641117] RAX:
ffff888109c14000 RBX:
ffff888111bece40 RCX:
0000000000000ffc
[ 183.642029] RDX:
0000000000001000 RSI:
ffffc90000c86000 RDI:
ffff888109c14004
[ 183.642946] RBP:
0000000000000ffc R08:
800000000000016b R09:
0000000000000000
[ 183.643848] R10:
ffffc90000c85000 R11:
0000000000000048 R12:
0000000000001000
[ 183.644742] R13:
ffff888111bed190 R14:
ffff888109c14000 R15:
0000000000001000
[ 183.645653] FS:
00007fe5ef807540(0000) GS:
ffff88845b380000(0000) knlGS:
0000000000000000
[ 183.646570] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 183.647481] CR2:
ffffc90000c86000 CR3:
000000010ff02006 CR4:
00000000003706e0
[ 183.648384] DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
[ 183.649271] DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
[ 183.650142] Call Trace:
[ 183.650988] <TASK>
[ 183.651793] vm_access+0x1f0/0x2a0 [i915]
[ 183.652726] __access_remote_vm+0x224/0x380
[ 183.653561] mem_rw.isra.0+0xf9/0x190
[ 183.654402] vfs_read+0x9d/0x1b0
[ 183.655238] ksys_read+0x63/0xe0
[ 183.656065] do_syscall_64+0x38/0xc0
[ 183.656882] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 183.657663] RIP: 0033:0x7fe5ef725142
[ 183.659351] RSP: 002b:
00007ffe1e81c7e8 EFLAGS:
00000246 ORIG_RAX:
0000000000000000
[ 183.660227] RAX:
ffffffffffffffda RBX:
0000557055dfb780 RCX:
00007fe5ef725142
[ 183.661104] RDX:
0000000000001000 RSI:
00007ffe1e81d880 RDI:
0000000000000005
[ 183.661972] RBP:
00007ffe1e81e890 R08:
0000000000000030 R09:
0000000000000046
[ 183.662832] R10:
0000557055dfc2e0 R11:
0000000000000246 R12:
0000557055dfb1c0
[ 183.663691] R13:
00007ffe1e81e980 R14:
0000000000000000 R15:
0000000000000000
Changes since v1:
- Updated if condition with range_overflows_t [Chris Wilson]
Fixes:
9f909e215fea ("drm/i915: Implement vm_ops->access for gdb access into mmaps")
Signed-off-by: Mastan Katragadda <mastanx.katragadda@intel.com>
Suggested-by: Adam Zabrocki <adamza@microsoft.com>
Reported-by: Jackson Cody <cody.jackson@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: Sudeep Dutt <sudeep.dutt@intel.com>
Cc: <stable@vger.kernel.org> # v5.8+
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
[mauld: tidy up the commit message and add Cc: stable]
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220303060428.1668844-1-mastanx.katragadda@intel.com
Matt Roper [Tue, 1 Mar 2022 05:29:52 +0000 (21:29 -0800)]
drm/i915/xehp: Drop aux table invalidation on FlatCCS platforms
Platforms with FlatCCS do not use auxiliary planes for compression
control data and thus do not need traditional aux table invalidation
(and the registers no longer even exist).
Original-author: CQ Tang
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220301052952.1706597-1-matthew.d.roper@intel.com
Matthew Auld [Wed, 2 Feb 2022 17:31:54 +0000 (17:31 +0000)]
drm/i915: opportunistically apply ALLOC_CONTIGIOUS
It looks like this code was accidentally dropped at some point(in a
slightly different form), so add it back. The gist is that if we know
the allocation will be one single chunk, then we can just annotate the
BO with I915_BO_ALLOC_CONTIGUOUS, even if the user doesn't bother. In
the future this should allow us to avoid using vmap for such objects,
in some upcoming patches.
v2(Thomas):
- Tweak the commit message to mention the future motivation
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220202173154.3758970-1-matthew.auld@intel.com
Matthew Auld [Thu, 3 Mar 2022 10:02:29 +0000 (10:02 +0000)]
drm/i915/gtt: reduce overzealous alignment constraints for GGTT
Currently this will enforce both 2M alignment and padding for any LMEM
pages inserted into the GGTT. However, this was only meant to be applied
to the compact-pt layout with the ppGTT. For the GGTT we can reduce the
alignment and padding to 64K.
Bspec: 45015
Fixes:
87bd701ee268 ("drm/i915: enforce min GTT alignment for discrete cards")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Robert Beckett <bob.beckett@collabora.com>
Cc: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220303100229.839282-1-matthew.auld@intel.com
Matthew Auld [Fri, 4 Mar 2022 17:42:52 +0000 (17:42 +0000)]
drm/i915: stop checking for NULL vma->obj
This is no longer possible since
e6e1a304d759 ("drm/i915: vma is always
backed by an object.").
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220304174252.1000238-1-matthew.auld@intel.com
Matthew Auld [Fri, 4 Mar 2022 09:59:34 +0000 (09:59 +0000)]
drm/i915: limit the async bind to bind_async_flags
If the vm doesn't request async binding, like for example with the dpt,
then we should be able to skip the async path and avoid calling
i915_vm_lock_objects() altogether. Currently if we have a moving fence
set for the BO(even though it might have signalled), we still take the
async patch regardless of the bind_async setting, and then later still
end up just doing i915_gem_object_wait_moving_fence() anyway.
Alternatively we would need to add dummy scratch object which can be
locked, just for the dpt.
Suggested-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220304095934.925036-2-matthew.auld@intel.com
Matthew Auld [Fri, 4 Mar 2022 09:59:33 +0000 (09:59 +0000)]
drm/i915/fbdev: fixup setting screen_size
Since we are actually mapping the object and not the vma, when dealing
with LMEM, we should be careful and use the backing store size here,
since the vma->node.size could have all kinds of funny padding
constraints, which could result in us writing to OOB address.
v2(Chris):
- Prefer vma->size here, which should be the backing store size. Some
more rework is needed here to stop using node.size in some other
places.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220304095934.925036-1-matthew.auld@intel.com
Thomas Hellström [Fri, 4 Mar 2022 08:26:41 +0000 (09:26 +0100)]
drm/i915/gem: Remove some unnecessary code
The test for vma should always return true, and when assigning -EBUSY
to ret, the variable should already have that value.
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220304082641.308069-4-thomas.hellstrom@linux.intel.com
Thomas Hellström [Fri, 4 Mar 2022 08:26:40 +0000 (09:26 +0100)]
drm/i915: Remove the vma refcount
Now that i915_vma_parked() is taking the object lock on vma destruction,
and the only user of the vma refcount, i915_gem_object_unbind()
also takes the object lock, remove the vma refcount.
v3: Documentation update.
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220304082641.308069-3-thomas.hellstrom@linux.intel.com
Thomas Hellström [Fri, 4 Mar 2022 08:26:39 +0000 (09:26 +0100)]
drm/i915: Remove the vm open count
vms are not getting properly closed. Rather than fixing that,
Remove the vm open count and instead rely on the vm refcount.
The vm open count existed solely to break the strong references the
vmas had on the vms. Now instead make those references weak and
ensure vmas are destroyed when the vm is destroyed.
Unfortunately if the vm destructor and the object destructor both
wants to destroy a vma, that may lead to a race in that the vm
destructor just unbinds the vma and leaves the actual vma destruction
to the object destructor. However in order for the object destructor
to ensure the vma is unbound it needs to grab the vm mutex. In order
to keep the vm mutex alive until the object destructor is done with
it, somewhat hackishly grab a vm_resv refcount that is released late
in the vma destruction process, when the vm mutex is no longer needed.
v2: Address review-comments from Niranjana
- Clarify that the struct i915_address_space::skip_pte_rewrite is a hack
and should ideally be replaced in an upcoming patch.
- Remove an unneeded continue in clear_vm_list and update comment.
v3:
- Documentation update
- Commit message formatting
Co-developed-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220304082641.308069-2-thomas.hellstrom@linux.intel.com
Gwan-gyeong Mun [Fri, 25 Feb 2022 13:13:16 +0000 (15:13 +0200)]
drm/i915/dmabuf: Fix prime_mmap to work when using LMEM
The current implementation of i915 prime mmap only works when initializing
drm_i915_gem_object with shmem_region.
When using LMEM, drm_i915_gem_object is initialized with ttm_system_region.
In order to make prime mmap work even this case, when using LMEM
(when using ttm in i915), dma_buf_ops.mmap callback function calls
drm_gem_prime_mmap(). drm_gem_prime_mmap() of drm core calls internally
i915_gem_mmap() so that prime mmap can perform normally.
The fake offset is processed inside drm_gem_prime_mmap().
Testcase: igt/prime_mmap
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220225131316.1433515-3-gwan-gyeong.mun@intel.com
Gwan-gyeong Mun [Fri, 25 Feb 2022 13:13:15 +0000 (15:13 +0200)]
drm/i915/dmabuf: Update dma_buf_ops.unmap_dma_buf callback to use drm_gem_unmap_dma_buf()
The dma_buf_ops.unmap_dma_buf callback used in i915,
i915_gem_unmap_dma_buf(), has the same code as drm_gem_unmap_dma_buf().
In order to eliminate defining and using duplicate function, it updates
the dma_buf_ops.unmap_dma_buf callback to use drm_gem_unmap_dma_buf().
Signed-off-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220225131316.1433515-2-gwan-gyeong.mun@intel.com
Stuart Summers [Thu, 3 Mar 2022 22:34:35 +0000 (14:34 -0800)]
drm/i915: Add RCS mask to GuC ADS params
If RCS is not enumerated, GuC will return invalid parameters.
Make sure we do not send RCS supported when we have not enumerated
it.
Cc: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Signed-off-by: Stuart Summers <stuart.summers@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220303223435.2793124-2-matthew.d.roper@intel.com
Matt Roper [Thu, 3 Mar 2022 22:34:34 +0000 (14:34 -0800)]
drm/i915/xehp: Support platforms with CCS engines but no RCS
In the past we've always assumed that an RCS engine is present on every
platform. However now that we have compute engines there may be
platforms that have CCS engines but no RCS, or platforms that are
designed to have both, but have the RCS engine fused off.
Various engine-centric initialization that only needs to be done a
single time for the group of RCS+CCS engines can't rely on being setup
with the RCS now; instead we add a I915_ENGINE_FIRST_RENDER_COMPUTE flag
that will be assigned to a single engine in the group; whichever engine
has this flag will be responsible for some of the general setup
(RCU_MODE programming, initialization of certain workarounds, etc.).
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220303223435.2793124-1-matthew.d.roper@intel.com
John Harrison [Wed, 2 Mar 2022 00:33:57 +0000 (16:33 -0800)]
drm/i915/guc: Fix potential invalid pointer dereferences when decoding G2Hs
Some G2H handlers were reading the context id field from the payload
before checking the payload met the minimum length required.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220302003357.4188363-9-John.C.Harrison@Intel.com
John Harrison [Wed, 2 Mar 2022 00:33:56 +0000 (16:33 -0800)]
drm/i915/guc: Drop obsolete H2G definitions
The CTB registration process changed significantly a while back using
a single KLV based H2G. So drop the original and now obsolete H2G
definitions.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220302003357.4188363-8-John.C.Harrison@Intel.com
John Harrison [Wed, 2 Mar 2022 00:33:55 +0000 (16:33 -0800)]
drm/i915/guc: Rename desc_idx to ctx_id
The LRC descriptor pool is going away. So, stop naming context ids as
descriptor pool indecies.
While at it, add a bunch of missing line feeds to some error messages.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220302003357.4188363-7-John.C.Harrison@Intel.com
John Harrison [Wed, 2 Mar 2022 00:33:54 +0000 (16:33 -0800)]
drm/i915/guc: Move lrc desc setup to where it is needed
The LRC descriptor was being initialised early on in the context
registration sequence. It could then be determined that the actual
registration needs to be delayed and the descriptor would be wiped
out. This is inefficient, so move the setup to later in the process
after the point of no return.
v2: Move some split changes into the split patch (and do them
correctly).
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220302003357.4188363-6-John.C.Harrison@Intel.com
John Harrison [Wed, 2 Mar 2022 00:33:53 +0000 (16:33 -0800)]
drm/i915/guc: Split guc_lrc_desc_pin apart
The LRC descriptor pool is going away. Further, the function that was
populating it was also doing a bunch of logic about the context
registration sequence. So, split that code apart into separate state
setup and try to register functions. Note that some of those 'try to
register' code paths actually undo the state setup and leave it to be
redone again later (with potentially different values). This is
inefficient. The next patch will correct this.
Also, move a comment about ignoring return values to the place where
the return values are actually ignored.
v2: Move some more splitting from a later patch (and do it correctly).
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220302003357.4188363-5-John.C.Harrison@Intel.com
John Harrison [Wed, 2 Mar 2022 00:33:52 +0000 (16:33 -0800)]
drm/i915/guc: Better name for context id limit
The LRC descriptor pool is going away. So, stop using it as the limit
for how many context ids are available. Instead, size the pool
according to the number of contexts allowed. Note that this is just a
naming change, the actual limit is identical in value.
While at it, also update a kzalloc(sizeof()*count) to be a
kcalloc(count,size).
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220302003357.4188363-4-John.C.Harrison@Intel.com
John Harrison [Wed, 2 Mar 2022 00:33:51 +0000 (16:33 -0800)]
drm/i915/guc: Add an explicit 'submission_initialized' flag
The LRC descriptor pool is going away. So, stop using it as a check
for whether submission has been initialised or not.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220302003357.4188363-3-John.C.Harrison@Intel.com
John Harrison [Wed, 2 Mar 2022 00:33:50 +0000 (16:33 -0800)]
drm/i915/guc: Do not conflate lrc_desc with GuC id for registration
The LRC descriptor pool is going away. So, stop using it as a check for
context registration, use the GuC id instead (being the thing that
actually gets registered with the GuC).
Also, rename the set/clear/query helper functions for context id
mappings to better reflect their purpose and to differentiate from
other registration related helper functions.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220302003357.4188363-2-John.C.Harrison@Intel.com
Srinivasan Shanmugam [Tue, 1 Mar 2022 23:15:49 +0000 (15:15 -0800)]
drm/i915/xehpsdv: Move render/compute engine reset domains related workarounds
Registers that exist in the shared render/compute reset domain need to
be placed on an engine workaround list to ensure that they are properly
re-applied whenever an RCS or CCS engine is reset. We have a number of
workarounds (updating registers MLTICTXCTL, L3SQCREG1_CCS0,
GEN12_MERT_MOD_CTRL, and GEN12_GAMCNTRL_CTRL) that are incorrectly
implemented on the 'gt' workaround list and need to be moved
accordingly.
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.s@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220301231549.1817978-14-matthew.d.roper@intel.com
Matt Roper [Tue, 1 Mar 2022 23:15:48 +0000 (15:15 -0800)]
drm/i915/xehp: Add compute workarounds
Additional workarounds are required once we start exposing CCS engines.
Note that we have a number of workarounds that update registers in the
shared render/compute reset domain. Historically we've just added such
registers to the RCS engine's workaround list. But going forward we
should be more careful to place such workarounds on a wa_list for an
engine that definitely exists and is not fused off (e.g., a platform
with no RCS would never apply the RCS wa_list). We'll keep
rcs_engine_wa_init() focused on RCS-specific workarounds that only need
to be applied if the RCS engine is present. A separate
general_render_compute_wa_init() function will be used to define
workarounds that touch registers in the shared render/compute reset
domain and that we need to apply regardless of what render and/or
compute engines actually exist. Any workarounds defined in this new
function will internally be added to the first present RCS or CCS
engine's workaround list to ensure they get applied (and only get
applied once rather than being needlessly re-applied several times).
Co-author: Srinivasan Shanmugam
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220301231549.1817978-13-matthew.d.roper@intel.com
Daniele Ceraolo Spurio [Wed, 2 Mar 2022 05:20:08 +0000 (21:20 -0800)]
drm/i915/xehp: handle fused off CCS engines
HW resources are divided across the active CCS engines at the compute
slice level, with each CCS having priority on one of the cslices.
If a compute slice has no enabled DSS, its paired compute engine is not
usable in full parallel execution because the other ones already fully
saturate the HW, so consider it fused off.
v2 (José):
- moved it to its own function
- fixed definition of ccs_mask
v3 (Matt):
- Replace fls() condition with a simple IP version test
v4 (Matt):
- Don't try to calculate a ccs_mask using
intel_slicemask_from_dssmask() until we've determined that we're
running on an Xe_HP platform where the logic makes sense (and won't
overflow).
Cc: Stuart Summers <stuart.summers@intel.com>
Cc: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Cc: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Stuart Summers <stuart.summers@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220302052008.1884985-1-matthew.d.roper@intel.com
Matthew Brost [Tue, 1 Mar 2022 23:15:46 +0000 (15:15 -0800)]
drm/i915/xehp: Don't support parallel submission on compute / render
A different emit breadcrumbs ring programming is required for compute /
render and we don't have UMD user so just reject parallel submission for
these engine classes.
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220301231549.1817978-11-matthew.d.roper@intel.com
Daniele Ceraolo Spurio [Tue, 1 Mar 2022 23:15:45 +0000 (15:15 -0800)]
drm/i915/xehp/guc: enable compute engine inside GuC
Tell GuC that CCS is enabled by setting the CCS mask in its ADS.
Cc: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Original-author: Michel Thierry
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220301231549.1817978-10-matthew.d.roper@intel.com
Matt Roper [Wed, 2 Mar 2022 00:15:54 +0000 (16:15 -0800)]
drm/i915/xehp: Enable ccs/dual-ctx in RCU_MODE
We have to specify in the Render Control Unit Mode register
when CCS is enabled.
v2:
- Move RCU_MODE programming to a helper function. (Tvrtko)
- Clean up and clarify comments. (Tvrtko)
- Add RCU_MODE to the GuC save/restore list. (Daniele)
v3:
- Move this patch before the GuC ADS update to enable compute engines;
the definition of RCU_MODE and its insertion into the save/restore
list moves to this patch. (Daniele)
v4:
- Call xehp_enable_ccs_engines() directly in guc_resume() and
execlists_resume() rather than adding an extra layer of wrapping to
the engine->resume() vfunc. (Umesh)
Bspec: 46034
Original-author: Michel Thierry
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Cc: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Aravind Iddamsetty <aravind.iddamsetty@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220302001554.1836066-1-matthew.d.roper@intel.com
Matt Roper [Tue, 1 Mar 2022 23:15:43 +0000 (15:15 -0800)]
drm/i915/xehp: Define context scheduling attributes in lrc descriptor
In Dual Context mode the EUs are shared between render and compute
command streamers. The hardware provides a field in the lrc descriptor
to indicate the prioritization of the thread dispatch associated to the
corresponding context.
The context priority is set to 'low' at creation time and relies on the
existing context priority to set it to low/normal/high.
Bspec: 46145, 46260
Original-author: Michel Thierry
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Signed-off-by: Aravind Iddamsetty <aravind.iddamsetty@intel.com>
Signed-off-by: Prasad Nallani <prasad.nallani@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220301231549.1817978-8-matthew.d.roper@intel.com
Matt Roper [Tue, 1 Mar 2022 23:15:42 +0000 (15:15 -0800)]
drm/i915: Move context descriptor fields to intel_lrc.h
This is a more appropriate header for these definitions.
v2:
- Cleanup whitespace. (Lucas)
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220301231549.1817978-7-matthew.d.roper@intel.com
Matt Roper [Tue, 1 Mar 2022 23:15:41 +0000 (15:15 -0800)]
drm/i915/xehp: CCS should use RCS setup functions
The compute engine handles the same commands the render engine can
(except 3D pipeline), so it makes sense that CCS is more similar to RCS
than non-render engines.
The CCS context state (lrc) is also similar to the render one, so reuse
it. Note that the compute engine has its own CTX_R_PWR_CLK_STATE
register.
In order to avoid having multiple RCS && CCS checks, add the following
engine flag:
- I915_ENGINE_HAS_RCS_REG_STATE - use the render (larger) reg state ctx.
BSpec: 46260
Original-author: Michel Thierry
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Aravind Iddamsetty <aravind.iddamsetty@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220301231549.1817978-6-matthew.d.roper@intel.com
Daniele Ceraolo Spurio [Tue, 1 Mar 2022 23:15:40 +0000 (15:15 -0800)]
drm/i915/xehp: compute engine pipe_control
CCS will reuse the RCS functions for breadcrumb and flush emission.
However, CCS pipe_control has additional programming restrictions:
- Command Streamer Stall Enable must be always set
- Post Sync Operations must not be set to Write PS Depth Count
- 3D-related bits must not be set
v2:
- Drop unwanted blank line. (Lucas)
Bspec: 47112
Cc: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Aravind Iddamsetty <aravind.iddamsetty@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220301231549.1817978-5-matthew.d.roper@intel.com
Matt Roper [Tue, 1 Mar 2022 23:15:39 +0000 (15:15 -0800)]
drm/i915/xehp: Add Compute CS IRQ handlers
Add execlists and GuC interrupts for compute CS into existing IRQ handlers.
All compute command streamers belong to the same compute class, so the
only change needed to enable their interrupts is to program their GT engine
interrupt mask registers.
CCS0 shares the register with CCS1, while CCS2 and CCS3 are in a new one.
BSpec: 50844, 54029, 54030, 53223, 53224.
Original-author: Michel Thierry
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Aravind Iddamsetty <aravind.iddamsetty@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220301231549.1817978-4-matthew.d.roper@intel.com
Matt Roper [Tue, 1 Mar 2022 23:15:38 +0000 (15:15 -0800)]
drm/i915/xehp: CCS shares the render reset domain
The reset domain is shared between render and all compute engines,
so resetting one will affect the others.
Note: Before performing a reset on an RCS or CCS engine, the GuC will
attempt to preempt-to-idle the other non-hung RCS/CCS engines to avoid
impacting other clients (since some shared modules will be reset). If
other engines are executing non-preemptable workloads, the impact is
unavoidable and some work may be lost.
Bspec: 52549
Original-author: Michel Thierry
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Aravind Iddamsetty <aravind.iddamsetty@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220301231549.1817978-3-matthew.d.roper@intel.com
Matt Roper [Tue, 1 Mar 2022 23:15:37 +0000 (15:15 -0800)]
drm/i915/xehp: Define compute class and engine
Introduce a Compute Command Streamer (CCS), which has access to
the media and GPGPU pipelines (but not the 3D pipeline).
To begin with, define the compute class/engine common functions, based
on the existing render ones.
v2:
- Add kerneldoc for drm_i915_gem_engine_class since we're adding a new
element to it. (Daniel)
- Make engine class <-> guc class converters use lookup tables to make
it more clear/explicit how the IDs map. (Tvrtko)
v3:
- Don't update uapi for now; we'll just include the driver-internal
changes for the time being.
Bspec: 46167, 45544
Original-author: Michel Thierry
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Aravind Iddamsetty <aravind.iddamsetty@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> #v1
Link: https://patchwork.freedesktop.org/patch/msgid/20220301231549.1817978-2-matthew.d.roper@intel.com
Sebastian Andrzej Siewior [Mon, 14 Feb 2022 18:59:08 +0000 (19:59 +0100)]
drm/i915: Depend on !PREEMPT_RT.
There are a few sections in the driver which are not compatible with
PREEMPT_RT. They trigger warnings and can lead to deadlocks at runtime.
Disable the i915 driver on a PREEMPT_RT enabled kernel. This way
PREEMPT_RT itself can be enabled without needing to address the i915
issues first. The RT related patches are still in RT queue and will be
handled later.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YgqmfKhwU5spS069@linutronix.de
John Harrison [Fri, 25 Feb 2022 01:52:32 +0000 (17:52 -0800)]
drm/i915/guc: Do not complain about stale reset notifications
It is possible for reset notifications to arrive for a context that is
in the process of being banned. So don't flag these as an error, just
report it as informational (because it is still useful to know that
resets are happening even if they are being ignored).
v2: Better wording for the message (review feedback from Tvrtko).
v3: Fix rebase issue (review feedback from Daniele).
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220225015232.1939497-1-John.C.Harrison@Intel.com
Daniele Ceraolo Spurio [Tue, 15 Feb 2022 01:11:23 +0000 (17:11 -0800)]
drm/i915/guc: Initialize GuC submission locks and queues early
Move initialization of submission-related spinlock, lists and workers to
init_early. This fixes an issue where if the GuC init fails we might
still try to get the lock in the context cleanup code. Note that it is
safe to call the GuC context cleanup code even if the init failed
because all contexts are initialized with an invalid GuC ID, which will
cause the GuC side of the cleanup to be skipped, so it is easier to just
make sure the variables are initialized than to special case the cleanup
to handle the case when they're not.
References: https://gitlab.freedesktop.org/drm/intel/-/issues/4932
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220215011123.734572-1-daniele.ceraolospurio@intel.com
John Harrison [Thu, 17 Feb 2022 21:29:42 +0000 (13:29 -0800)]
drm/i915/guc: Fix flag query helper function to not modify state
A flag query helper was actually writing to the flags word rather than
just reading. Fix that. Also update the function's comment as it was
out of date.
NB: No need for a 'Fixes' tag. The test was only ever used inside a
BUG_ON during context registration. Rather than asserting that the
condition was true, it was making the condition true. So, in theory,
there was no consequence because we should never have hit a BUG_ON
anyway. Which means the write should always have been a no-op.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220217212942.629922-1-John.C.Harrison@Intel.com
Matthew Auld [Mon, 28 Feb 2022 12:36:07 +0000 (12:36 +0000)]
drm/i915/selftests: exercise mmap migration
Exercise each of the migration scenarios, verifying that the final
placement and buffer contents match our expectations.
v2(Thomas): Replace for_i915_gem_ww() block with simpler object_lock()
v3:
- For testing purposes allow forcing the io_size such that we can
exercise the allocation + migration path on devices that don't have the
small BAR limit.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220228123607.580432-4-matthew.auld@intel.com
Matthew Auld [Mon, 28 Feb 2022 12:36:06 +0000 (12:36 +0000)]
drm/i915/selftests: handle allocation failures
If we have to contend with non-mappable LMEM, then we need to ensure the
object fits within the mappable portion, like in the selftests, where we
later try to CPU access the pages. However if it can't then we need to
gracefully handle this, without throwing an error.
Also it looks like TTM will return -ENOMEM, in ttm_bo_mem_space() after
exhausting all possible placements.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Acked-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220228123607.580432-3-matthew.auld@intel.com
Matthew Auld [Mon, 28 Feb 2022 12:36:05 +0000 (12:36 +0000)]
drm/i915/ttm: mappable migration on fault
The end goal is to have userspace tell the kernel what buffers will
require CPU access, however if we ever reach the CPU fault handler, and
the current resource is not mappable, then we should attempt to migrate
the buffer to the mappable portion of LMEM, or even system memory, if the
allowable placements permit it.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220228123607.580432-2-matthew.auld@intel.com
Matthew Auld [Mon, 28 Feb 2022 12:36:04 +0000 (12:36 +0000)]
drm/i915/ttm: make eviction mappable aware
If we need to make room for some mappable object, then we should
only victimize objects that have one or pages that occupy the visible
portion of LMEM. Let's also create a new priority hint for objects that
are placed in mappable memory, where we know that CPU access was
requested, that way we hopefully victimize these last.
v2(Thomas): s/TTM_PL_PRIV/I915_PL_LMEM0/
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220228123607.580432-1-matthew.auld@intel.com
Thomas Hellström [Tue, 22 Feb 2022 13:32:09 +0000 (14:32 +0100)]
drm/i915: Clarify vma lifetime
It's unclear what reference the initial vma kref reference refers to.
A vma can have multiple weak references, the object vma list,
the vm's bound list and the GT's closed_list, and the initial vma
reference can be put from lookups of all these lists.
With the current implementation this means
that any holder of yet another vma refcount (currently only
i915_gem_object_unbind()) needs to be holding two of either
*) An object refcount,
*) A vm open count
*) A vma open count
in order for us to not risk leaking a reference by having the
initial vma reference being put twice.
Address this by re-introducing i915_vma_destroy() which removes all
weak references of the vma and *then* puts the initial vma refcount.
This makes a strong vma reference hold on to the vma unconditionally.
Perhaps a better name would be i915_vma_revoke() or i915_vma_zombify(),
since other callers may still hold a refcount, but with the prospect of
being able to replace the vma refcount with the object lock in the near
future, let's stick with i915_vma_destroy().
Finally this commit fixes a race in that previously i915_vma_release() and
now i915_vma_destroy() could destroy a vma without taking the vm->mutex
after an advisory check that the vma mm_node was not allocated.
This would race with the ungrab_vma() function creating a trace similar
to the below one. This was fixed in one of the __i915_vma_put() callsites
in
commit
bc1922e5d349 ("drm/i915: Fix a race between vma / object destruction and unbinding")
but although not seemingly triggered by CI, that
is not sufficient. This patch is needed to fix that properly.
[823.012188] Console: switching to colour dummy device 80x25
[823.012422] [IGT] gem_ppgtt: executing
[823.016667] [IGT] gem_ppgtt: starting subtest blt-vs-render-ctx0
[852.436465] stack segment: 0000 [#1] PREEMPT SMP NOPTI
[852.436480] CPU: 0 PID: 3200 Comm: gem_ppgtt Not tainted 5.16.0-CI-CI_DRM_11115+ #1
[852.436489] Hardware name: Intel Corporation Alder Lake Client Platform/AlderLake-P DDR5 RVP, BIOS ADLPFWI1.R00.2422.A00.
2110131104 10/13/2021
[852.436499] RIP: 0010:ungrab_vma+0x9/0x80 [i915]
[852.436711] Code: ef e8 4b 85 cf e0 e8 36 a3 d6 e0 8b 83 f8 9c 00 00 85 c0 75 e1 5b 5d 41 5c 41 5d c3 e9 d6 fd 14 00 55 53 48 8b af c0 00 00 00 <8b> 45 00 85 c0 75 03 5b 5d c3 48 8b 85 a0 02 00 00 48 89 fb 48 8b
[852.436727] RSP: 0018:
ffffc90006db7880 EFLAGS:
00010246
[852.436734] RAX:
0000000000000000 RBX:
ffffc90006db7598 RCX:
0000000000000000
[852.436742] RDX:
ffff88815349e898 RSI:
ffff88815349e858 RDI:
ffff88810a284140
[852.436748] RBP:
6b6b6b6b6b6b6b6b R08:
ffff88815349e898 R09:
ffff88815349e8e8
[852.436754] R10:
0000000000000001 R11:
0000000051ef1141 R12:
ffff88810a284140
[852.436762] R13:
0000000000000000 R14:
ffff88815349e868 R15:
ffff88810a284458
[852.436770] FS:
00007f5c04b04e40(0000) GS:
ffff88849f000000(0000) knlGS:
0000000000000000
[852.436781] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[852.436788] CR2:
00007f5c04b38fe0 CR3:
000000010a6e8001 CR4:
0000000000770ef0
[852.436797] PKRU:
55555554
[852.436801] Call Trace:
[852.436806] <TASK>
[852.436811] i915_gem_evict_for_node+0x33c/0x3c0 [i915]
[852.437014] i915_gem_gtt_reserve+0x106/0x130 [i915]
[852.437211] i915_vma_pin_ww+0x8f4/0xb60 [i915]
[852.437412] eb_validate_vmas+0x688/0x860 [i915]
[852.437596] i915_gem_do_execbuffer+0xc0e/0x25b0 [i915]
[852.437770] ? deactivate_slab+0x5f2/0x7d0
[852.437778] ? _raw_spin_unlock_irqrestore+0x50/0x60
[852.437789] ? i915_gem_execbuffer2_ioctl+0xc6/0x2c0 [i915]
[852.437944] ? init_object+0x49/0x80
[852.437950] ? __lock_acquire+0x5e6/0x2580
[852.437963] i915_gem_execbuffer2_ioctl+0x116/0x2c0 [i915]
[852.438129] ? i915_gem_do_execbuffer+0x25b0/0x25b0 [i915]
[852.438300] drm_ioctl_kernel+0xac/0x140
[852.438310] drm_ioctl+0x201/0x3d0
[852.438316] ? i915_gem_do_execbuffer+0x25b0/0x25b0 [i915]
[852.438490] __x64_sys_ioctl+0x6a/0xa0
[852.438498] do_syscall_64+0x37/0xb0
[852.438507] entry_SYSCALL_64_after_hwframe+0x44/0xae
[852.438515] RIP: 0033:0x7f5c0415b317
[852.438523] Code: b3 66 90 48 8b 05 71 4b 2d 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 41 4b 2d 00 f7 d8 64 89 01 48
[852.438542] RSP: 002b:
00007ffd765039a8 EFLAGS:
00000246 ORIG_RAX:
0000000000000010
[852.438553] RAX:
ffffffffffffffda RBX:
000055e4d7829dd0 RCX:
00007f5c0415b317
[852.438562] RDX:
00007ffd76503a00 RSI:
00000000c0406469 RDI:
0000000000000017
[852.438571] RBP:
00007ffd76503a00 R08:
0000000000000000 R09:
0000000000000081
[852.438579] R10:
00000000ffffff7f R11:
0000000000000246 R12:
00000000c0406469
[852.438587] R13:
0000000000000017 R14:
00007ffd76503a00 R15:
0000000000000000
[852.438598] </TASK>
[852.438602] Modules linked in: snd_hda_codec_hdmi i915 mei_hdcp x86_pkg_temp_thermal snd_hda_intel snd_intel_dspcfg drm_buddy coretemp crct10dif_pclmul crc32_pclmul snd_hda_codec ttm ghash_clmulni_intel snd_hwdep snd_hda_core e1000e drm_dp_helper ptp snd_pcm mei_me drm_kms_helper pps_core mei syscopyarea sysfillrect sysimgblt fb_sys_fops prime_numbers intel_lpss_pci smsc75xx usbnet mii
[852.440310] ---[ end trace
e52cdd2fe4fd911c ]---
v2: Fix typos in the commit message.
Fixes:
7e00897be8bf ("drm/i915: Add object locking to i915_gem_evict_for_node and i915_gem_evict_something, v2.")
Fixes:
bc1922e5d349 ("drm/i915: Fix a race between vma / object destruction and unbinding")
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220222133209.587978-1-thomas.hellstrom@linux.intel.com
Matthew Auld [Fri, 25 Feb 2022 14:55:02 +0000 (14:55 +0000)]
drm/i915/selftests: mock test io_size
Check that mappable vs non-mappable matches our expectations.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220225145502.331818-7-matthew.auld@intel.com
Matthew Auld [Fri, 25 Feb 2022 14:55:01 +0000 (14:55 +0000)]
drm/i915/buddy: tweak 2big check
Otherwise we get -EINVAL, instead of the more useful -E2BIG if the
allocation doesn't fit within the pfn range, like with mappable lmem.
The hugepages selftest, for example, needs this to know if a smaller
size is needed.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Acked-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220225145502.331818-6-matthew.auld@intel.com
Matthew Auld [Fri, 25 Feb 2022 14:55:00 +0000 (14:55 +0000)]
drm/i915/buddy: adjust res->start
Differentiate between mappable vs non-mappable resources, also if this
is an actual range allocation ensure we set res->start as the starting
pfn. Later when we need to do non-mappable -> mappable moves then we
want TTM to see that the current placement is not compatible, which
should result in an actual move, instead of being turned into a noop.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Acked-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220225145502.331818-5-matthew.auld@intel.com
Matthew Auld [Fri, 25 Feb 2022 14:54:59 +0000 (14:54 +0000)]
drm/i915/buddy: track available visible size
Track the total amount of available visible memory, and also track
per-resource the amount of used visible memory. For now this is useful
for our debug output, and deciding if it is even worth calling into the
buddy allocator. In the future tracking the per-resource visible usage
will be useful for when deciding if we should attempt to evict certain
buffers.
v2:
- s/place->lpfn/lpfn/, that way we can avoid scanning the list if the
entire range is already mappable.
- Move the end declaration inside the if block(Thomas).
- Make sure to also account for reserved memory.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Acked-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220225145502.331818-4-matthew.auld@intel.com
Matthew Auld [Fri, 25 Feb 2022 14:54:58 +0000 (14:54 +0000)]
drm/i915: add I915_BO_ALLOC_GPU_ONLY
If the user doesn't require CPU access for the buffer, then
ALLOC_GPU_ONLY should be used, in order to prioritise allocating in the
non-mappable portion of LMEM, on devices with small BAR.
v2(Thomas):
- The BO_ALLOC_TOPDOWN naming here is poor, since this is pure lies on
systems that don't even have small BAR. A better name is GPU_ONLY,
which is accurate regardless of the configuration.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Acked-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220225145502.331818-3-matthew.auld@intel.com
Matthew Auld [Fri, 25 Feb 2022 14:54:57 +0000 (14:54 +0000)]
drm/i915/ttm: require mappable by default
On devices with non-mappable LMEM ensure we always allocate the pages
within the mappable portion. For now we assume that all LMEM buffers
will require CPU access, which is also inline with pretty much all
current kernel internal users. In the next patch we will introduce a new
flag to override this behaviour.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Acked-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220225145502.331818-2-matthew.auld@intel.com
Matthew Auld [Fri, 25 Feb 2022 14:54:56 +0000 (14:54 +0000)]
drm/i915: add io_size plumbing
With small LMEM-BAR we need to be able to differentiate between the
total size of LMEM, and how much of it is CPU mappable. The end goal is
to be able to utilize the entire range, even if part of is it not CPU
accessible.
v2: also update intelfb_create
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Acked-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220225145502.331818-1-matthew.auld@intel.com
Matthew Auld [Fri, 25 Feb 2022 10:34:43 +0000 (10:34 +0000)]
drm/i915: apply PM_EARLY for non-GTT mappable objects
On DG2 we allow objects that are smaller than the min_page_size, under
the premise that these are never mapped by the GTT, like with the paging
structures. Currently the suspend-resume path will try to map such
objects through the migration vm, which hits:
[ 560.529217] kernel BUG at drivers/gpu/drm/i915/gt/intel_migrate.c:431!
[ 560.536081] invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
[ 560.541629] CPU: 4 PID: 2062 Comm: rtcwake Tainted: G W 5.17.0-rc5-demarchi+ #175
[ 560.550716] Hardware name: Intel Corporation CoffeeLake Client Platform/CoffeeLake S UDIMM RVP, BIOS CNLSFWR1.R00.X220.B00.
2103302221 03/30/2021
[ 560.563627] RIP: 0010:emit_pte+0x2e7/0x380 [i915]
[ 560.568665] Code: ee 02 48 89 69 04 83 c6 05 83 c0 05 39 f0 0f 4f c6 48 8b 73 08 39 d0 0f 4f c2 44 89 f2 4c 8d 4a ff 49 85 f1 0f 84 62 fe ff ff <0f> 0b 48 c7 03 00 00 00 00 4d 89 c6 8b 01 48 29 ce 48 8d 57 0c 48
[ 560.587691] RSP: 0018:
ffffc9000104f8a0 EFLAGS:
00010206
[ 560.592906] RAX:
0000000000000040 RBX:
ffffc9000104f908 RCX:
ffffc900025114d0
[ 560.600024] RDX:
0000000000010000 RSI:
00000003f9fe2000 RDI:
ffffc900025114dc
[ 560.607458] RBP:
0000000001840000 R08:
ffff88810f335540 R09:
000000000000ffff
[ 560.614865] R10:
000000000000081b R11:
0000000000000001 R12:
000000000000081b
[ 560.622300] R13:
0000000000000000 R14:
0000000000010000 R15:
ffff888107c3e240
[ 560.629716] FS:
00007f5b7c086580(0000) GS:
ffff88846dc00000(0000) knlGS:
0000000000000000
[ 560.638090] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 560.644132] CR2:
00007f3ab0a133a8 CR3:
000000010a43e003 CR4:
00000000003706e0
[ 560.651590] DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
[ 560.659002] DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
[ 560.666438] Call Trace:
[ 560.668885] <TASK>
[ 560.670983] intel_context_migrate_copy+0x1b1/0x4c0 [i915]
[ 560.676794] __i915_ttm_move+0x628/0x790 [i915]
[ 560.681704] ? dma_resv_iter_next+0x8f/0xb0
[ 560.686223] ? dma_resv_iter_first+0xe5/0x140
[ 560.690894] ? i915_deps_add_resv+0x4b/0x110 [i915]
[ 560.696147] ? dma_resv_reserve_shared+0x161/0x310
[ 560.701228] i915_gem_obj_copy_ttm+0x10f/0x220 [i915]
[ 560.706650] i915_ttm_backup+0x191/0x2f0 [i915]
[ 560.711558] i915_gem_process_region+0x266/0x3b0 [i915]
[ 560.717153] ? verify_cpu+0xf0/0x100
[ 560.721040] ? pci_pm_resume_early+0x20/0x20
[ 560.725603] i915_ttm_backup_region+0x47/0x70 [i915]
[ 560.730927] i915_gem_backup_suspend+0x141/0x170 [i91
For now let's just force the memcpy path for such objects during
suspend-resume.
Fixes:
00e27ad85bc9 ("drm/i915/migrate: add acceleration support for DG2")
Reported-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220225103443.225228-1-matthew.auld@intel.com
Lucas De Marchi [Wed, 16 Feb 2022 17:41:47 +0000 (09:41 -0800)]
drm/i915/guc: Remove plain ads_blob pointer
Now we have the access to content of GuC ADS either using iosys_map
API or using a temporary buffer. Remove guc->ads_blob as there shouldn't
be updates using the bare pointer anymore.
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220216174147.3073235-17-lucas.demarchi@intel.com
Lucas De Marchi [Wed, 16 Feb 2022 17:41:46 +0000 (09:41 -0800)]
drm/i915/guc: Convert __guc_ads_init to iosys_map
Now that all the called functions from __guc_ads_init() are converted to
use ads_map, stop using ads_blob in __guc_ads_init().
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220216174147.3073235-16-lucas.demarchi@intel.com
Lucas De Marchi [Wed, 16 Feb 2022 17:41:45 +0000 (09:41 -0800)]
drm/i915/guc: Convert guc_mmio_reg_state_init to iosys_map
Now that the regset list is prepared, convert guc_mmio_reg_state_init()
to use iosys_map to copy the array to the final location and
initialize additional fields in ads.reg_state_list.
v2: Just use an offset instead of temporary iosys_map.
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220216174147.3073235-15-lucas.demarchi@intel.com
Lucas De Marchi [Wed, 16 Feb 2022 17:41:44 +0000 (09:41 -0800)]
drm/i915/guc: Convert capture list to iosys_map
Use iosys_map to write the fields ads.capture_*.
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220216174147.3073235-14-lucas.demarchi@intel.com
Lucas De Marchi [Wed, 16 Feb 2022 17:41:43 +0000 (09:41 -0800)]
drm/i915/guc: Convert mapping table to iosys_map
Use iosys_map to write the fields system_info.mapping_table[][].
Since we already have the info_map around where needed, just use it
instead of going through guc->ads_map.
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220216174147.3073235-13-lucas.demarchi@intel.com
Lucas De Marchi [Wed, 16 Feb 2022 17:41:42 +0000 (09:41 -0800)]
drm/i915/guc: Replace check for golden context size
In the other places in this function, guc->ads_map is being protected
from access when it's not yet set. However the last check is actually
about guc->ads_golden_ctxt_size been set before. These checks should
always match as the size is initialized on the first call to
guc_prep_golden_context(), but it's clearer if we have a single return
and check for guc->ads_golden_ctxt_size.
This is just a readability improvement, no change in behavior.
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220216174147.3073235-12-lucas.demarchi@intel.com
Lucas De Marchi [Wed, 16 Feb 2022 17:41:41 +0000 (09:41 -0800)]
drm/i915/guc: Convert golden context prep to iosys_map
Use the saved ads_map to prepare the golden context. One difference from
the init context is that this function can be called before there is a
gem object (and thus the guc->ads_map) to calculare the size of the
golden context that should be allocated for that object.
So in this case the function needs to be prepared for not having the
system_info with enabled engines filled out. To accomplish that an
info_map is prepared on the side to point either to the gem object
or the local variable on the stack. This allows making
fill_engine_enable_masks() operate always with a iosys_map
argument.
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220216174147.3073235-11-lucas.demarchi@intel.com
Lucas De Marchi [Wed, 16 Feb 2022 17:41:40 +0000 (09:41 -0800)]
drm/i915/guc: Convert guc_ads_private_data_reset to iosys_map
Use iosys_map_memset() to zero the private data as ADS may be either
on system or IO memory.
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220216174147.3073235-10-lucas.demarchi@intel.com
Lucas De Marchi [Wed, 16 Feb 2022 17:41:39 +0000 (09:41 -0800)]
drm/i915/guc: Convert engine record to iosys_map
Use iosys_map to read fields from the dma_blob so access to IO and
system memory is abstracted away.
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Atwood<matthew.s.atwood@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220216174147.3073235-9-lucas.demarchi@intel.com
Lucas De Marchi [Wed, 16 Feb 2022 17:41:38 +0000 (09:41 -0800)]
drm/i915/guc: Convert policies update to iosys_map
Use iosys_map to write the policies update so access to IO and system
memory is abstracted away.
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220216174147.3073235-8-lucas.demarchi@intel.com
Lucas De Marchi [Wed, 16 Feb 2022 17:41:37 +0000 (09:41 -0800)]
drm/i915/guc: Convert golden context init to iosys_map
Now the map is saved during creation, so use it to initialize the
golden context, reading from shmem and writing to either system or IO
memory.
v2: Do not use a map iterator: add an offset to keep track of
destination
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220216174147.3073235-7-lucas.demarchi@intel.com
Lucas De Marchi [Wed, 16 Feb 2022 17:41:36 +0000 (09:41 -0800)]
drm/i915/guc: Add read/write helpers for ADS blob
Add helpers on top of iosys_map_read_field() /
iosys_map_write_field() functions so they always use the right
arguments and make code easier to read.
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220216174147.3073235-6-lucas.demarchi@intel.com
Lucas De Marchi [Wed, 16 Feb 2022 17:41:35 +0000 (09:41 -0800)]
drm/i915/guc: Keep iosys_map of ads_blob around
Convert intel_guc_ads_create() and initialization to use iosys_map
rather than plain pointer and save it in the guc struct. This will help
with additional updates to the ads_blob after the
creation/initialization by abstracting the IO vs system memory.
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220216174147.3073235-5-lucas.demarchi@intel.com
Lucas De Marchi [Wed, 16 Feb 2022 17:41:34 +0000 (09:41 -0800)]
drm/i915/gt: Add helper for shmem copy to iosys_map
Add a variant of shmem_read() that takes a iosys_map pointer rather
than a plain pointer as argument. It's mostly a copy __shmem_rw() but
adapting the api and removing the write support since there's currently
only need to use iosys_map as destination.
Reworking __shmem_rw() to share the implementation was tempting, but
finding a good balance between reuse and clarity pushed towards a little
code duplication. Since the function is small, just add the similar
function with a copy/paste/adapt approach.
v2: Add an offset as argument and instead of using a map iterator, use the
offset to keep track of where we are writing data to.
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220216174147.3073235-4-lucas.demarchi@intel.com
Clint Taylor [Fri, 11 Feb 2022 05:23:33 +0000 (21:23 -0800)]
drm/i915/dg2: add Wa_14014947963
BSPEC: 46123
v2: Address review feedback [MattR]
v3: move register definition to gt_regs [MattR]
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Clint Taylor <clinton.a.taylor@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220211052333.12306-1-clinton.a.taylor@intel.com
Matthew Auld [Mon, 21 Feb 2022 12:11:03 +0000 (12:11 +0000)]
drm/i915/ttm: fixup the mock_bo
When running the mock selftests we currently blow up with:
<6> [299.836278] i915: Running i915_gem_huge_page_mock_selftests/igt_mock_memory_region_huge_pages
<1> [299.836356] BUG: kernel NULL pointer dereference, address:
00000000000000c8
<1> [299.836361] #PF: supervisor read access in kernel mode
<1> [299.836364] #PF: error_code(0x0000) - not-present page
<6> [299.836367] PGD 0 P4D 0
<4> [299.836369] Oops: 0000 [#1] PREEMPT SMP NOPTI
<4> [299.836372] CPU: 1 PID: 1429 Comm: i915_selftest Tainted: G U 5.17.0-rc4-CI-CI_DRM_11227+ #1
<4> [299.836376] Hardware name: Intel(R) Client Systems NUC11TNHi5/NUC11TNBi5, BIOS TNTGL357.0042.2020.1221.1743 12/21/2020
<4> [299.836380] RIP: 0010:ttm_resource_init+0x57/0x90 [ttm]
<4> [299.836392] RSP: 0018:
ffffc90001e4f680 EFLAGS:
00010203
<4> [299.836395] RAX:
0000000000000000 RBX:
ffffc90001e4f708 RCX:
0000000000000000
<4> [299.836398] RDX:
ffff888116172528 RSI:
ffffc90001e4f6f8 RDI:
0000000000000000
<4> [299.836401] RBP:
ffffc90001e4f6f8 R08:
00000000000001b0 R09:
ffff888116172528
<4> [299.836403] R10:
0000000000000001 R11:
00000000a4cb2e51 R12:
ffffc90001e4fa90
<4> [299.836406] R13:
ffff888116172528 R14:
ffff888130d7f4b0 R15:
ffff888130d7f400
<4> [299.836409] FS:
00007ff241684500(0000) GS:
ffff88849fe80000(0000) knlGS:
0000000000000000
<4> [299.836412] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
<4> [299.836416] CR2:
00000000000000c8 CR3:
0000000107b80001 CR4:
0000000000770ee0
<4> [299.836418] PKRU:
55555554
<4> [299.836420] Call Trace:
<4> [299.836422] <TASK>
<4> [299.836423] i915_ttm_buddy_man_alloc+0x68/0x240 [i915]
ttm_resource_init() now needs to access the bo->bdev, and also wants to
store the bo reference. Try to keep both working. The mock_bo is a hack
so we can interface directly with the ttm managers alloc() and free() hooks for
our mock testing, without invoking other TTM features like eviction,
moves, etc.
v2: make sure we only touch res->bo if the alloc() returns successfully
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/5123
Fixes:
0e05fc49c358 ("drm/ttm: add common accounting to the resource mgr v3")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220221121103.2473831-1-matthew.auld@intel.com
Tvrtko Ursulin [Fri, 25 Feb 2022 13:44:44 +0000 (13:44 +0000)]
Merge drm/drm-next into drm-intel-gt-next
Matt needed some buddy allocator changes for landing DG2 small BAR
support patches.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
José Roberto de Souza [Wed, 23 Feb 2022 19:49:46 +0000 (11:49 -0800)]
drm/i915: Check stolen memory size before calling drm_mm_init
Add check for zero usable stolen memory before calling drm_mm_init
to support configurations where stolen memory exists but is fully
reserved.
Also skip memory test in cases that usable stolen is smaller than
page size(amount mapped and used to test memory).
v2:
- skiping test if available memory is smaller than page size (Lucas)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Steve Carbonari <steven.carbonari@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220223194946.725328-1-jose.souza@intel.com
Dave Airlie [Thu, 24 Feb 2022 19:30:17 +0000 (05:30 +1000)]
Merge tag 'drm-misc-next-2022-02-23' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v5.18:
UAPI Changes:
Cross-subsystem Changes:
- Split out panel-lvds and lvds dt bindings .
- Put yes/no on/off disabled/enabled strings in linux/string_helpers.h
and use it in drivers and tomoyo.
- Clarify dma_fence_chain and dma_fence_array should never include eachother.
- Flatten chains in syncobj's.
- Don't double add in fbdev/defio when page is already enlisted.
- Don't sort deferred-I/O pages by default in fbdev.
Core Changes:
- Fix missing pm_runtime_put_sync in bridge.
- Set modifier support to only linear fb modifier if drivers don't
advertise support.
- As a result, we remove allow_fb_modifiers.
- Add missing clear for EDID Deep Color Modes in drm_reset_display_info.
- Assorted documentation updates.
- Warn once in drm_clflush if there is no arch support.
- Add missing select for dp helper in drm_panel_edp.
- Assorted small fixes.
- Improve fb-helper's clipping handling.
- Don't dump shmem mmaps in a core dump.
- Add accounting to ttm resource manager, and use it in amdgpu.
- Allow querying the detected eDP panel through debugfs.
- Add helpers for xrgb8888 to 8 and 1 bits gray.
- Improve drm's buddy allocator.
- Add selftests for the buddy allocator.
Driver Changes:
- Add support for nomodeset to a lot of drm drivers.
- Use drm_module_*_driver in a lot of drm drivers.
- Assorted small fixes to bridge/lt9611, v3d, vc4, vmwgfx, mxsfb, nouveau,
bridge/dw-hdmi, panfrost, lima, ingenic, sprd, bridge/anx7625, ti-sn65dsi86.
- Add bridge/it6505.
- Create DP and DVI-I connectors in ast.
- Assorted nouveau backlight fixes.
- Rework amdgpu reset handling.
- Add dt bindings for ingenic,jz4780-dw-hdmi.
- Support reading edid through aux channel in ingenic.
- Add a drm driver for Solomon SSD130x OLED displays.
- Add simple support for sharp LQ140M1JW46.
- Add more panels to nt35560.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/686ec871-e77f-c230-22e5-9e3bb80f064a@linux.intel.com
Dave Airlie [Thu, 24 Feb 2022 06:59:17 +0000 (16:59 +1000)]
Merge tag 'drm-intel-next-2022-02-23' of git://anongit.freedesktop.org/drm/drm-intel into drm-next
Linux core:
-----------
iosys-map: Add offset to iosys_map_memcpy_to() (Lucas)
iosys-map: Add a few more helpers (Lucas)
i915 (display and core changes on drm-intel-next):
--------------------------------------------------
- Display's DBuf and watermark related fixes and improvements (Ville)
- More i915 header and other code clean-up (Jani)
- Display IPS fixes and improvements (Ville)
- OPRegion fixes and cleanups (Jani)
- Fix the plane end Y offset check for FBC (Ville)
- DP 128b/132b updates (Jani)
- Disable runtime pm wakeref tracking for the mock device selftest (Ville)
- Many display code clean-up while targeting to fix up DP DFP 4:2:0 handling (Ville)
- Bigjoiner state tracking and more bigjoiner related work (Ville)
- Update DMC_DEBUG3 register for DG1 (Chuansheng)
- SAGV fixes (Ville)
- More GT register cleanup (Matt)
- Fix build issue when using clang (Tong)
- Display DG2 fixes (Matt)
- ADL-P PHY related fixes (Imre)
- PSR2 fixes (Jose)
- Add PCH Support for Alder Lake N (Tejas)
drm-intel-gt-next (drm-intel-gt-next-2022-02-17):
-------------------------------------------------
UAPI Changes:
- Weak parallel submission support for execlists
Minimal implementation of the parallel submission support for
execlists backend that was previously only implemented for GuC.
Support one sibling non-virtual engine.
Core Changes:
- Two backmerges of drm/drm-next for header file renames/changes and
i915_regs reorganization
Driver Changes:
- Add new DG2 subplatform: DG2-G12 (Matt R)
- Add new DG2 workarounds (Matt R, Ram, Bruce)
- Handle pre-programmed WOPCM registers for DG2+ (Daniele)
- Update guc shim control programming on XeHP SDV+ (Daniele)
- Add RPL-S C0/D0 stepping information (Anusha)
- Improve GuC ADS initialization to work on ARM64 on dGFX (Lucas)
- Fix KMD and GuC race on accessing PMU busyness (Umesh)
- Use PM timestamp instead of RING TIMESTAMP for reference in PMU with GuC (Umesh)
- Report error on invalid reset notification from GuC (John)
- Avoid WARN splat by holding RPM wakelock during PXP unbind (Juston)
- Fixes to parallel submission implementation (Matt B.)
- Improve GuC loading status check/error reports (John)
- Tweak TTM LRU priority hint selection (Matt A.)
- Align the plane_vma to min_page_size of stolen mem (Ram)
- Introduce vma resources and implement async unbinding (Thomas)
- Use struct vma_resource instead of struct vma_snapshot (Thomas)
- Return some TTM accel move errors instead of trying memcpy move (Thomas)
- Fix a race between vma / object destruction and unbinding (Thomas)
- Remove short-term pins from execbuf (Maarten)
- Update to GuC version 69.0.3 (John, Michal Wa.)
- Improvements to GT reset paths in GuC backend (Matt B.)
- Use shrinker_release_pages instead of writeback in shmem object hooks (Matt A., Tvrtko)
- Use trylock instead of blocking lock when freeing GEM objects (Maarten)
- Allocate intel_engine_coredump_alloc with ALLOW_FAIL (Matt B.)
- Fixes to object unmapping and purging (Matt A)
- Check for wedged device in GuC backend (John)
- Avoid lockdep splat by locking dpt_obj around set_cache_level (Maarten)
- Allow dead vm to unbind vma's without lock (Maarten)
- s/engine->i915/i915/ for DG2 engine workarounds (Matt R)
- Use to_gt() helper for GGTT accesses (Michal Wi.)
- Selftest improvements (Matt B., Thomas, Ram)
- Coding style and compiler warning fixes (Matt B., Jasmine, Andi, Colin, Gustavo, Dan)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YhbDan8wNZBR6FzF@intel.com
Rodrigo Vivi [Wed, 23 Feb 2022 19:19:43 +0000 (14:19 -0500)]
Merge tag 'drm-intel-gt-next-2022-02-17' of git://anongit.freedesktop.org/drm/drm-intel into drm-intel-next
UAPI Changes:
- Weak parallel submission support for execlists
Minimal implementation of the parallel submission support for
execlists backend that was previously only implemented for GuC.
Support one sibling non-virtual engine.
Core Changes:
- Two backmerges of drm/drm-next for header file renames/changes and
i915_regs reorganization
Driver Changes:
- Add new DG2 subplatform: DG2-G12 (Matt R)
- Add new DG2 workarounds (Matt R, Ram, Bruce)
- Handle pre-programmed WOPCM registers for DG2+ (Daniele)
- Update guc shim control programming on XeHP SDV+ (Daniele)
- Add RPL-S C0/D0 stepping information (Anusha)
- Improve GuC ADS initialization to work on ARM64 on dGFX (Lucas)
- Fix KMD and GuC race on accessing PMU busyness (Umesh)
- Use PM timestamp instead of RING TIMESTAMP for reference in PMU with GuC (Umesh)
- Report error on invalid reset notification from GuC (John)
- Avoid WARN splat by holding RPM wakelock during PXP unbind (Juston)
- Fixes to parallel submission implementation (Matt B.)
- Improve GuC loading status check/error reports (John)
- Tweak TTM LRU priority hint selection (Matt A.)
- Align the plane_vma to min_page_size of stolen mem (Ram)
- Introduce vma resources and implement async unbinding (Thomas)
- Use struct vma_resource instead of struct vma_snapshot (Thomas)
- Return some TTM accel move errors instead of trying memcpy move (Thomas)
- Fix a race between vma / object destruction and unbinding (Thomas)
- Remove short-term pins from execbuf (Maarten)
- Update to GuC version 69.0.3 (John, Michal Wa.)
- Improvements to GT reset paths in GuC backend (Matt B.)
- Use shrinker_release_pages instead of writeback in shmem object hooks (Matt A., Tvrtko)
- Use trylock instead of blocking lock when freeing GEM objects (Maarten)
- Allocate intel_engine_coredump_alloc with ALLOW_FAIL (Matt B.)
- Fixes to object unmapping and purging (Matt A)
- Check for wedged device in GuC backend (John)
- Avoid lockdep splat by locking dpt_obj around set_cache_level (Maarten)
- Allow dead vm to unbind vma's without lock (Maarten)
- s/engine->i915/i915/ for DG2 engine workarounds (Matt R)
- Use to_gt() helper for GGTT accesses (Michal Wi.)
- Selftest improvements (Matt B., Thomas, Ram)
- Coding style and compiler warning fixes (Matt B., Jasmine, Andi, Colin, Gustavo, Dan)
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Yg4i2aCZvvee5Eai@jlahtine-mobl.ger.corp.intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
[Fixed conflicts while applying, using the fixups/drm-intel-gt-next.patch
from drm-rerere's
1f2b1742abdd ("2022y-02m-23d-16h-07m-57s UTC: drm-tip
rerere cache update")]
José Roberto de Souza [Fri, 18 Feb 2022 21:03:30 +0000 (13:03 -0800)]
drm/i915/rps/tgl+: Remove RPS interrupt support
TGL+ and newer platforms don't support RPS up and low interruption
limits.
It is not used for broadwell and newer plaforms that supports
execlist but here making sure that it is explicit not used even in
debug scenarios.
BSpec: 33301
BSpec: 52069
BSpec: 9520
HSD:
1405911647
Cc: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220218210330.48653-1-jose.souza@intel.com
José Roberto de Souza [Tue, 22 Feb 2022 14:14:24 +0000 (06:14 -0800)]
drm/i915/tgl: Simply subplatform detection
In the past we had a need to differentiate TGL U and TGL Y, there
was a different voltage swing table for each subplatform and some PCI
ids of this subplatforms are shared but it turned out that it was a
specification mistake and the voltage swing table was indeed the same
but we went ahead with that patch because we needed to differentiate
TGL U and Y from TGL H and by that time TGL H was embargoed so that
was the perfect way to land it upstream.
Now the embargo for TGL H is long past and now we even have
INTEL_TGL_12_GT1_IDS with all TGL H ids, so we can drop this PCI root
check and only rely in the PCI ids to differentiate TGL U and Y from
TGL H that actually has code differences.
Besides the simplification this will fix issues in virtualization
environments where the PCI root is virtualized and don't have the same
id as actual hardware.
v2:
- add and set INTEL_SUBPLATFORM_UY
Cc: Fred Gao <fred.gao@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Tested-by: Yu He <yu.he@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220222141424.35165-1-jose.souza@intel.com
Ville Syrjälä [Fri, 18 Feb 2022 06:40:39 +0000 (08:40 +0200)]
drm/i915: Extract intel_bw_check_data_rate()
Extract the data rate calculation loop out from
intel_bw_atomic_check() to make it a bit less confusing.
v2: Deal with 'bool changed'
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> #v1
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220218064039.12834-7-ville.syrjala@linux.intel.com
Ville Syrjälä [Fri, 18 Feb 2022 06:40:38 +0000 (08:40 +0200)]
drm/i915: Extract icl_qgv_points_mask()
Declutter intel_bw_atomic_check() a bit by pulling
the max QGV mask calculation out.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220218064039.12834-6-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Ville Syrjälä [Thu, 17 Feb 2022 10:32:21 +0000 (12:32 +0200)]
drm/i915: Properly clear crtc state when disabling it fully, again
Currently we just leave the old gunk lying around in the crtc
state when userspace asks us to fully disable the crtc. That
doesn't match what the state would be had we never even enabled
the crtc in the first place. So let's make this consistent and
call intel_crtc_prepare_cleared_state() for disabled crtcs as well
(excluding bigjoiner slaves of course which have had their state
copied from the master).
I actually already did this once in commit
fff13e63a141 ("drm/i915:
Clear most of crtc state when disabling the crtc") but then
commit
19f65a3dbf75 ("drm/i915: Try to make bigjoiner work in atomic
check") undid it all :(
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220217103221.10405-5-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Ville Syrjälä [Thu, 17 Feb 2022 10:32:20 +0000 (12:32 +0200)]
drm/i915: Remove odd any_ms=true assignment
For some reason we're flagging that we need to run through the
full modeset calculations (any_ms==true -> do cdclk/etc. checks)
if any crtc got initially flagged for a modeset and is not
enabled via the uapi. No idea why this is here since later on
(after all fastset handling) we do full run through the crtcs
and flag any_ms if anything still needs a full modeset. So let's
just throw out this early weirdo.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220217103221.10405-4-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Ville Syrjälä [Thu, 17 Feb 2022 10:32:19 +0000 (12:32 +0200)]
drm/i915: Dump hw.enable and pipe_mode
Include hw.enable and pipe_mode in the crtc debugfs state dump.
These are fairly fundemental to the operation of the driver
so not seeing them leaves us in the dark.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220217103221.10405-3-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Ville Syrjälä [Thu, 17 Feb 2022 10:32:18 +0000 (12:32 +0200)]
drm/i915: Dump the crtc hw state always
Let's just dump the "full" hw crtc state in debugs so that we can
see if some stale junk was left behind when the crtc is supposed
to be entirely off.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220217103221.10405-2-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Arunpravin [Tue, 22 Feb 2022 17:48:45 +0000 (23:18 +0530)]
drm/selftests: add drm buddy pathological testcase
create a pot-sized mm, then allocate one of each possible
order within. This should leave the mm with exactly one
page left. Free the largest block, then whittle down again.
Eventually we will have a fully 50% fragmented mm.
v2(Matthew Auld):
- removed unnecessary test succeeded print
- replace list_del()/list_add_tail() with list_move_tail()
Signed-off-by: Arunpravin <Arunpravin.PaneerSelvam@amd.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220222174845.2175-7-Arunpravin.PaneerSelvam@amd.com
Signed-off-by: Christian König <christian.koenig@amd.com>
Arunpravin [Tue, 22 Feb 2022 17:48:44 +0000 (23:18 +0530)]
drm/selftests: add drm buddy smoke testcase
- add a test to ascertain that the critical functionalities
of the program is working fine
- add a timeout helper function
v2:
- removed unnecessary test succeeded print
- replace list_del()/list_add_tail() with list_move_tail()
Signed-off-by: Arunpravin <Arunpravin.PaneerSelvam@amd.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220222174845.2175-6-Arunpravin.PaneerSelvam@amd.com
Signed-off-by: Christian König <christian.koenig@amd.com>
Arunpravin [Tue, 22 Feb 2022 17:48:43 +0000 (23:18 +0530)]
drm/selftests: add drm buddy pessimistic testcase
create a pot-sized mm, then allocate one of each possible
order within. This should leave the mm with exactly one
page left.
v2:
- removed unnecessary test succeeded print
- replace list_del()/list_add_tail() with list_move_tail()
Signed-off-by: Arunpravin <Arunpravin.PaneerSelvam@amd.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220222174845.2175-5-Arunpravin.PaneerSelvam@amd.com
Signed-off-by: Christian König <christian.koenig@amd.com>
Arunpravin [Tue, 22 Feb 2022 17:48:42 +0000 (23:18 +0530)]
drm/selftests: add drm buddy optimistic testcase
create a mm with one block of each order available, and
try to allocate them all.
v2(Matthew Auld):
- removed unnecessary test succeeded print
- replace list_del()/list_add_tail() with list_move_tail()
Signed-off-by: Arunpravin <Arunpravin.PaneerSelvam@amd.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220222174845.2175-4-Arunpravin.PaneerSelvam@amd.com
Signed-off-by: Christian König <christian.koenig@amd.com>
Arunpravin [Tue, 22 Feb 2022 17:48:41 +0000 (23:18 +0530)]
drm/selftests: add drm buddy alloc range testcase
- add a test to check the range allocation
- export get_buddy() function in drm_buddy.c
- export drm_prandom_u32_max_state() in lib/drm_random.c
- include helper functions
- include prime number header file
v2:
- add drm_get_buddy() function description (Matthew Auld)
- removed unnecessary test succeeded print
Signed-off-by: Arunpravin <Arunpravin.PaneerSelvam@amd.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220222174845.2175-3-Arunpravin.PaneerSelvam@amd.com
Signed-off-by: Christian König <christian.koenig@amd.com>
Arunpravin [Tue, 22 Feb 2022 17:48:40 +0000 (23:18 +0530)]
drm/selftests: add drm buddy alloc limit testcase
add a test to check the maximum allocation limit
v2(Matthew Auld):
- added err = -EINVAL in block NULL check
- removed unnecessary test succeeded print
Signed-off-by: Arunpravin <Arunpravin.PaneerSelvam@amd.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Acked-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220222174845.2175-2-Arunpravin.PaneerSelvam@amd.com
Signed-off-by: Christian König <christian.koenig@amd.com>
Arunpravin [Tue, 22 Feb 2022 17:48:39 +0000 (23:18 +0530)]
drm/selftests: Move i915 buddy selftests into drm
- move i915 buddy selftests into drm selftests folder
- add Makefile and Kconfig support
- add sanitycheck testcase
Prerequisites
- These series of selftests patches are created on top of
drm buddy series
- Enable kselftests for DRM as a module in .config
Signed-off-by: Arunpravin <Arunpravin.PaneerSelvam@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220222174845.2175-1-Arunpravin.PaneerSelvam@amd.com
Signed-off-by: Christian König <christian.koenig@amd.com>
Jiawei Gu [Tue, 22 Feb 2022 09:42:52 +0000 (17:42 +0800)]
drm/sched: Add device pointer to drm_gpu_scheduler
Add device pointer so scheduler's printing can use
DRM_DEV_ERROR() instead, which makes life easier under multiple GPU
scenario.
v2: amend all calls of drm_sched_init()
v3: fill dev pointer for all drm_sched_init() calls
Signed-off-by: Jiawei Gu <Jiawei.Gu@amd.com>
Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220221095705.5290-1-Jiawei.Gu@amd.com
Ville Syrjälä [Wed, 23 Feb 2022 08:18:10 +0000 (10:18 +0200)]
Revert "drm/i915/display/vrr: Reset VRR capable property on a long hpd"
This reverts commit
9bc34b4d0f3cb368241684cc5e0445d435dded44.
Just oopses on most machines.
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220223081810.19917-1-ville.syrjala@linux.intel.com
Acked-by: Jani Nikula <jani.nikula@intel.com>
Tejas Upadhyay [Thu, 27 Jan 2022 10:35:20 +0000 (16:05 +0530)]
drm/i915/adl-n: Add PCH Support for Alder Lake N
Add the PCH ID for ADL-N.
Signed-off-by: Tejas Upadhyay <tejaskumarx.surendrakumar.upadhyay@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220127103520.348015-1-tejaskumarx.surendrakumar.upadhyay@intel.com
Manasi Navare [Tue, 15 Feb 2022 20:26:01 +0000 (12:26 -0800)]
drm/i915/display/vrr: Reset VRR capable property on a long hpd
With some VRR panels, user can turn VRR ON/OFF on the fly from the panel settings.
When VRR is turned OFF ,sends a long HPD to the driver clearing the Ignore MSA bit
in the DPCD. Currently the driver parses that onevery HPD but fails to reset
the corresponding VRR Capable Connector property.
Hence the userspace still sees this as VRR Capable panel which is incorrect.
Fix this by explicitly resetting the connector property.
v2: Reset vrr capable if status == connector_disconnected
v3: Use i915 and use bool vrr_capable (Jani Nikula)
v4: Move vrr_capable to after update modes call (Jani N)
Remove the redundant comment (Jan N)
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220215202601.22943-1-manasi.d.navare@intel.com
projects / platform / kernel / linux-starfive.git / log