Spencer E. Olson [Wed, 3 Oct 2018 20:56:05 +0000 (14:56 -0600)]
staging: comedi: ni_mio_common: implement new routing for TRIG_EXT
Use new signal routing capability for all comedi command *_src == TRIG_EXT
options. This new interface allows the user specify signals and terminals
as TRIG_EXT sources using a very consistent naming convention. Furthermore,
the interface allows backwards compatibility to prior behavior of
specifying register-level (or near register-level) values as *_arg options
when *_src == TRIG_EXT.
Annotates and updates tables of register values to reflect this new
implementation status.
Signed-off-by: Spencer E. Olson <olsonse@umich.edu>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Spencer E. Olson [Wed, 3 Oct 2018 20:56:04 +0000 (14:56 -0600)]
staging: comedi: add interface to ni routing table information
Adds interface and associated unittests for accessing/looking-up/validating
the new ni routing table information.
Signed-off-by: Spencer E. Olson <olsonse@umich.edu>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Spencer E. Olson [Wed, 3 Oct 2018 20:56:03 +0000 (14:56 -0600)]
staging: comedi: ni_routing: Add NI signal routing info
See README for a thorough discussion of this content.
Adds tables of all register values for routing various signals to various
terminals on National Instruments hardware. This information is directly
compared to and taken from register-level programming documentation and/or
register-level programming examples as provided by National Instruments.
Furthermore, this information was mostly compared (favorably) to the
register values already used in the comedi drivers for NI hardware.
Adds tables of valid routes for many devices. This information is not
consistent from device to device, nor entirely consistent within device
families. One additional major challenge is that this information does not
seem to be obtainable in any programmatic fashion, neither through the
proprietary NIDAQmx(-base) c-libraries, nor with register level
programming, _nor_ through any documentation. In fact, the only consistent
source of this information is through the proprietary NI-MAX software,
which currently only runs on Windows platforms. A further challenge is
that this information cannot be exported from NI-MAX, except by screenshot.
The collection and maintenance of this information is somewhat tedious and
requires frequent re-examination and comparison of NI-MAX and/or the
NI-MHDDK documentation (register programming information) and NI-MHDDK
examples. Tools are added with this patch to facilitate generating CSV
files from the data tables. These CSV files can be used with a spreadsheet
program to provide better visual comparision with screenshots gathered from
NI-MAX. Tools are also added to regenerate the data tables from CSV
content--this greatly enhances updating data tables with large changes
(such as when adding devices).
Signed-off-by: Spencer E. Olson <olsonse@umich.edu>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Spencer E. Olson [Wed, 3 Oct 2018 20:56:02 +0000 (14:56 -0600)]
staging: comedi: add new device-global config interface
Adds interface for configuring options that are global to all sub-devices.
For now, only options to configure device-globally identified signal routes
have been defined.
Signed-off-by: Spencer E. Olson <olsonse@umich.edu>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Spencer E. Olson [Wed, 3 Oct 2018 20:56:01 +0000 (14:56 -0600)]
staging: comedi: add abstracted NI signal/terminal named constants
This change adds abstracted constants for National Instruments
terminal/signal names.
Some background:
There have been significant confusions over the past many years for users
when trying to understand how to connect to/from signals and terminals on
NI hardware using comedi. The major reason for this is that the actual
register values were exposed and required to be used by users. Several
major reasons exist why this caused major confusion for users:
1) The register values are _NOT_ in user documentation, but rather in
arcane locations, such as a few register programming manuals that are
increasingly hard to find and the NI-MHDDK (comments in in example
code). There is no one place to find the various valid values of the
registers.
2) The register values are _NOT_ completely consistent. There is no way
to gain any sense of intuition of which values, or even enums one
should use for various registers. There was some attempt in prior use
of comedi to name enums such that a user might know which enums should
be used for varying purposes, but the end-user had to gain a knowledge
of register values to correctly wield this approach.
3) The names for signals and registers found in the various register
level programming manuals and vendor-provided documentation are _not_
even close to the same names that are in the end-user documentation.
Similar confusion, albeit less, plagued NI's previous version of their own
proprietary drivers. Earlier than 2003, NI greatly simplified the
situation for users by releasing a new API that abstracted the names of
signals/terminals to a common and intuitive set of names. In addition,
this new API provided a much more common interface to use for most of NI
hardware.
The names added here mirror the names chosen and well documented by NI.
These names are exposed to the user via the comedilib user library. By
keeping the names in this format, in spite of the use of CamelScript,
maintenance will be greatly eased and confusion for users _and_ comedi
developers will be greatly reduced.
Signed-off-by: Spencer E. Olson <olsonse@umich.edu>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Spencer E. Olson [Wed, 3 Oct 2018 20:56:00 +0000 (14:56 -0600)]
staging: comedi: tests: add unittest framework for comedi
Adds a framework for unittests for comedi drivers. It was certainly
possible to write some unit tests before and test various aspects of a
particular driver, but this framework makes this a bit easier and hopefully
inspires more unittest modules to be written.
Signed-off-by: Spencer E. Olson <olsonse@umich.edu>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Spencer E. Olson [Wed, 19 Sep 2018 16:51:06 +0000 (10:51 -0600)]
staging: comedi: comedi_test: implement INSN_CONFIG_GET_CMD_TIMING_CONSTRAINTS
Adds implementation of the new INSN_CONFIG_GET_CMD_TIMING_CONSTRAINTS
instruction.
Signed-off-by: Spencer E. Olson <olsonse@umich.edu>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Spencer E. Olson [Wed, 19 Sep 2018 16:51:05 +0000 (10:51 -0600)]
staging: comedi: ni_pcidio: implement INSN_CONFIG_GET_CMD_TIMING_CONSTRAINTS
Adds implementation of the new INSN_CONFIG_GET_CMD_TIMING_CONSTRAINTS
instruction. This patch also adds data for this implementation, based on
spec sheets from NI.
Signed-off-by: Spencer E. Olson <olsonse@umich.edu>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Spencer E. Olson [Wed, 19 Sep 2018 16:51:04 +0000 (10:51 -0600)]
staging: comedi: ni_mio_common: implement INSN_CONFIG_GET_CMD_TIMING_CONSTRAINTS
Adds implementation of the new INSN_CONFIG_GET_CMD_TIMING_CONSTRAINTS
instruction. This patch also adds data for digital subdevices that are
streaming capable (within the ni_mio_* family). Mostly, only the m-series
devices are capable of digital streaming.
Signed-off-by: Spencer E. Olson <olsonse@umich.edu>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Spencer E. Olson [Wed, 19 Sep 2018 16:51:03 +0000 (10:51 -0600)]
staging: comedi: add facility to directly query subdevice timing constraints
Adds facility to directly query the hardware speed limits of subdevices,
in particular for scan_begin and convert signals. This information can be
critical for integrating comedi with other hardware modules, and also
comedi modules together with software where software requires specific
timing capabilities in order to properly coordinate multiple devices.
Currently, comedi_command_test almost satisfies this need, but really only
for when *_src == TRIG_TIMER. For *_src == TRIG_EXT, comedi_command_test
does not help at all. For many subdevices, one might simply use
*_src==TRIG_TIMER in command_test in order to determine these limits. For
other subdevices, this tactic does not work since *_src == TRIG_TIMER might
not be valid. There is also the possibility that the timing limits are
different between the TRIG_TIMER and TRIG_EXT modes.
Signed-off-by: Spencer E. Olson <olsonse@umich.edu>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
John Whitmore [Sun, 7 Oct 2018 21:40:25 +0000 (22:40 +0100)]
staging:rtl8192u: Correct comparison with NULL - Style
Correct code to remote comparison with NULL, this clears the resulting
checkpatch issue.
This is a coding style change which should not impact runtime code
execution.
Signed-off-by: John Whitmore <johnfwhitmore@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
John Whitmore [Sun, 7 Oct 2018 21:40:24 +0000 (22:40 +0100)]
staging:rtl8192u: Correct code alignment - Style
Correct the alignment of a function, this clears checkpatch issue.
This is a simple coding style change which should not impact runtime
code execution.
Signed-off-by: John Whitmore <johnfwhitmore@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
John Whitmore [Sun, 7 Oct 2018 21:40:23 +0000 (22:40 +0100)]
staging:rtl8192u: Remove unnecessary line continuation - Style
Remove the unnecessary line continuation character to clear checkpatch
issue.
This is a simple coding style change which should not impact runtime
code execution.
Signed-off-by: John Whitmore <johnfwhitmore@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
John Whitmore [Sun, 7 Oct 2018 21:40:22 +0000 (22:40 +0100)]
staging:rtl8192u: Add missing blank lines - Style
Add missing blank lines after declarations. This clears the resulting
checkpatch issue.
This is a simple coding style change which should not impact runtime
code execution.
Signed-off-by: John Whitmore <johnfwhitmore@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
John Whitmore [Sun, 7 Oct 2018 21:40:21 +0000 (22:40 +0100)]
staging:rtl8192u: Correct code indentation - Style
Rewrite code block to correct the indentation of code. This clears the
resulting checkpatch issue.
This is a coding style change which should not impact runtime code
execution.
Signed-off-by: John Whitmore <johnfwhitmore@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
John Whitmore [Sun, 7 Oct 2018 21:40:19 +0000 (22:40 +0100)]
staging:rtl8192u: Add spaces around + operator - Style
Add spaces around '+' operator to clear the checkpatch issue.
This is a coding style change which should have no impact on runtime
code execution.
Signed-off-by: John Whitmore <johnfwhitmore@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
John Whitmore [Sun, 7 Oct 2018 21:40:18 +0000 (22:40 +0100)]
staging:rtl8192u: Remove extra blank lines - Style
Remove the extra blank lines to clear checkpatch issue.
This is a simple coding style change which should have no impact
on runtime code execution.
Signed-off-by: John Whitmore <johnfwhitmore@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
John Whitmore [Sun, 7 Oct 2018 21:40:17 +0000 (22:40 +0100)]
staging:rtl8192u: Clear error with line ending ( - Style
Rewrite function call to clear the checkpatch issue with lines ending
with a '(' character.
This is a coding style change which should have no impact on runtime
code execution.
Signed-off-by: John Whitmore <johnfwhitmore@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
John Whitmore [Sun, 7 Oct 2018 21:40:16 +0000 (22:40 +0100)]
staging:rtl8192u: Removed commented out include - Style
Remove commented out #include directive.
Additionally shorted a block comment to clear the checkpatch issue
with line length.
These are coding style changes which should have no impact on runtime
code execution.
Signed-off-by: John Whitmore <johnfwhitmore@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
John Whitmore [Sun, 7 Oct 2018 21:40:15 +0000 (22:40 +0100)]
staging:rtl8192u: Add missing SPDX-License-Identifier - Style
Add the missing SPDX-License-Identifier tag to file to clear the
checkpatch issue.
This is a coding style change which should have no impact on runtime
code execution.
Signed-off-by: John Whitmore <johnfwhitmore@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tuomas Tynkkynen [Thu, 4 Oct 2018 09:37:47 +0000 (12:37 +0300)]
staging: vc04_services: Drop no longer needed headers
Previously, connection.h was only required for the definition of
VCHI_CONNECTION_T, but now all usages of it are gone. Remove this unused
header.
After connection.h is gone, message.h and vchi_cfg_internal.h are no
longer referenced by anything either. Drop them as well.
Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
Acked-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tuomas Tynkkynen [Thu, 4 Oct 2018 09:37:46 +0000 (12:37 +0300)]
staging: vc04_services: Drop unused parameters from vchi_connect()
Remove two parameters which are never used and all where all callers
just pass in dummy values anyway.
Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
Acked-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tuomas Tynkkynen [Thu, 4 Oct 2018 09:37:45 +0000 (12:37 +0300)]
staging: vc04_services: Drop VCHI_SERVICE_INIT and SERVICE_INFO_T
These types are not used anywhere, remove them.
Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
Acked-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tuomas Tynkkynen [Thu, 4 Oct 2018 09:37:44 +0000 (12:37 +0300)]
staging: vc04_services: Drop declaration of vchi_crc_control()
There is no definition for this unused function, so drop its prototype.
Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
Acked-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tuomas Tynkkynen [Thu, 4 Oct 2018 09:37:43 +0000 (12:37 +0300)]
staging: vc04_services: Drop trivially unused fields from SERVICE_CREATION_T
These fields are only initialized with constants and never read. Drop
them.
Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
Acked-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tuomas Tynkkynen [Thu, 4 Oct 2018 09:37:42 +0000 (12:37 +0300)]
staging: vc04_services: Drop 'connection' field from SERVICE_CREATION_T
The connection field of SERVICE_CREATION_T is assigned to but its value
is never read. Drop the field and the resulting no longer needed code
from bcm2835-audio and bcm2835-camera.
Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
Acked-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tuomas Tynkkynen [Thu, 4 Oct 2018 09:37:41 +0000 (12:37 +0300)]
staging: vc04_services: Drop pointless stub functions
These functions do nothing besides returning NULL and are unused.
Just drop them.
Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
Acked-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Spencer E. Olson [Wed, 3 Oct 2018 20:54:16 +0000 (14:54 -0600)]
staging: comedi: ni_mio_common: protect register write overflow
Fixes two problems introduced as early as
commit
03aef4b6dc12 ("Staging: comedi: add ni_mio_common code"):
(1) Ensures that the last four bits of NISTC_RTSI_TRIGB_OUT_REG register is
not unduly overwritten on e-series devices. On e-series devices, the
first three of the last four bits are reserved. The last bit defines
the output selection of the RGOUT0 pin, otherwise known as
RTSI_Sub_Selection. For m-series devices, these last four bits are
indeed used as the output selection of the RTSI7 pin (and the
RTSI_Sub_Selection bit for the RGOUT0 pin is moved to the
RTSI_Trig_Direction register.
(2) Allows all 4 RTSI_BRD lines to be treated as valid sources for RTSI
lines.
This patch also cleans up the ni_get_rtsi_routing command for readability.
Fixes:
03aef4b6dc12 ("Staging: comedi: add ni_mio_common code")
Signed-off-by: Spencer E. Olson <olsonse@umich.edu>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michael Straube [Sat, 6 Oct 2018 13:02:31 +0000 (15:02 +0200)]
staging: rtl8188eu: add spaces around operators in odm_rtl8188e.c
Add spaces around '|', '>>' and '/' to follow kernel coding style.
Reported by checkpatch.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michael Straube [Sat, 6 Oct 2018 13:02:30 +0000 (15:02 +0200)]
staging: rtl8188eu: remove dead code from dm_fast_training_init()
The variable AntCombination is initialized to 2 and never changed.
So the else if path is never used. Remove the dead code and the
variable AntCombination.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michael Straube [Thu, 4 Oct 2018 17:57:00 +0000 (19:57 +0200)]
staging: rtl8188eu: remove whitespace in rtw_mlme_ext.h
Remove spaces and/or replace tabs with spaces in some declarations
in rtw_mlme_ext.h.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michael Straube [Thu, 4 Oct 2018 17:56:59 +0000 (19:56 +0200)]
staging: rtl8188eu: make struct field of action_handler const
The strings in the use of struct action_handler are constant.
Change the type of field str from 'char *' to 'const char *'.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michael Straube [Thu, 4 Oct 2018 17:56:58 +0000 (19:56 +0200)]
staging: rtl8188eu: make struct field of mlme_handler const
The strings in the uses of struct mlme_handler are constant.
Change the type of field str from 'char *' to 'const char *'.
Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michael Straube [Thu, 4 Oct 2018 17:56:57 +0000 (19:56 +0200)]
staging: rtl8188eu: change array type to const u8
Change the type of MCS_rate_1R from unsigned char to const u8.
Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michael Straube [Wed, 3 Oct 2018 20:43:59 +0000 (22:43 +0200)]
staging: rtl8188eu: rewrite if tests - style
Rewrite if tests to clear a 'line over 80 characters' and
'Comparisons should place the constant on the right side of the test'
checkpatch warning.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michael Straube [Wed, 3 Oct 2018 20:43:58 +0000 (22:43 +0200)]
staging: rtl8188eu: cleanup array declaration - style
Cleanup array declaration to clear two 'line over 80 characters'
checkpatch warnings and improve readability.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michael Straube [Wed, 3 Oct 2018 20:43:57 +0000 (22:43 +0200)]
staging: rtl8188eu: fix line over 80 characters - style
Line break array declaration to clear a 'line over 80 characters'
checkpatch warning. For consistency replace 0x0 with 0x00.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jaakko Tyynismaa [Tue, 9 Oct 2018 05:06:48 +0000 (05:06 +0000)]
staging: mt7621-mmc: Add blank line after declaration
Add blank line after declaration.
Reported by checkpatch.
Signed-off-by: Jaakko Tyynismaa <jaakko.tyynismaa@hotmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nathan Chancellor [Thu, 4 Oct 2018 05:56:00 +0000 (22:56 -0700)]
staging: emxx_udc: Remove unused device_desc declaration
Clang warns:
drivers/staging/emxx_udc/emxx_udc.c:1373:37: warning: variable
'device_desc' is not needed and will not be emitted
[-Wunneeded-internal-declaration]
static struct usb_device_descriptor device_desc = {
^
1 warning generated.
This definition hasn't been attached to anything since the driver was
introduced in commit
33aa8d45a4fe ("staging: emxx_udc: Add Emma Mobile
USB Gadget driver") and neither GCC nor Clang emit any reference to the
variable in the final assembly. The only reason GCC doesn't warn about
this variable being unused is the sizeof function.
Reported-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nathan Chancellor [Thu, 4 Oct 2018 01:32:51 +0000 (18:32 -0700)]
staging: rtl8723bs: Remove unnecessary parentheses and dead commented code
Clang warns when multiple pairs of parentheses are used for a single
conditional statement.
drivers/staging/rtl8723bs/hal/rtl8723b_hal_init.c:3351:20: warning:
equality comparison with extraneous parentheses [-Wparentheses-equality]
The commented code is pointless since _HW_STATE_AP_ is handled right
below this block.
Link: https://github.com/ClangBuiltLinux/linux/issues/168
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nishad Kamdar [Thu, 4 Oct 2018 16:37:26 +0000 (22:07 +0530)]
staging: mt7621-mmc: Remove #if 0 blocks in dbg.h
This patch removes #if 0 code blocks and usages of
functions defined in the #if 0 blocks in dbg.h.
Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nishad Kamdar [Thu, 4 Oct 2018 16:36:36 +0000 (22:06 +0530)]
staging: mt7621-mmc: Remove #if 0 blocks in dbg.c
This patch removes #if 0 code blocks and usages of
functions defined in the #if 0 blocks in dbg.c
Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nishad Kamdar [Thu, 4 Oct 2018 16:35:38 +0000 (22:05 +0530)]
staging: mt7621-mmc: Remove #if 0 blocks in sd.c
This patch removes #if 0 code blocks and usages of
functions defined in the #if 0 blocks in sd.c.
Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nathan Chancellor [Thu, 4 Oct 2018 01:21:25 +0000 (18:21 -0700)]
staging: rtlwifi: Remove unnecessary parentheses
Clang warns when multiple pairs of parentheses are used for a single
conditional statement.
drivers/staging/rtlwifi/phydm/phydm_adc_sampling.c:558:33: warning:
equality comparison with extraneous parentheses [-Wparentheses-equality]
} else if ((is_enable_la_mode == 1)) {
~~~~~~~~~~~~~~~~~~^~~~
drivers/staging/rtlwifi/phydm/phydm_adc_sampling.c:558:33: note: remove
extraneous parentheses around the comparison to silence this warning
} else if ((is_enable_la_mode == 1)) {
~ ^ ~
drivers/staging/rtlwifi/phydm/phydm_adc_sampling.c:558:33: note: use '='
to turn this equality comparison into an assignment
} else if ((is_enable_la_mode == 1)) {
^~
=
1 warning generated.
Link: https://github.com/ClangBuiltLinux/linux/issues/172
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
YueHaibing [Fri, 5 Oct 2018 11:23:54 +0000 (11:23 +0000)]
staging: axis-fifo: remove duplicated include from axis-fifo.c
Remove duplicated include.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mamta Shukla [Sat, 6 Oct 2018 22:28:19 +0000 (03:58 +0530)]
staging: media: davinci_vpfe: Use __func__ instead of function name
Access current function name using __func__.
Use %s and __func__ instead of function name.
Use of predefined identifier __func__ prevents typo error in function
name in print calls.
Issue found with checkpatch.pl
Signed-off-by: Mamta Shukla <mamtashukla555@gmail.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mamta Shukla [Sat, 6 Oct 2018 11:31:35 +0000 (17:01 +0530)]
staging: vt6655: Remove space after cast
Remove space after cast to fix checkpatch issue.
CHECK: No space is necessary after a cast
Signed-off-by: Mamta Shukla <mamtashukla555@gmail.com>
Reviewed-by: Himanshu Jha <himanshujha199640@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mamta Shukla [Sat, 6 Oct 2018 11:30:00 +0000 (17:00 +0530)]
staging: vt6655: Add spaces around operators
Add spaces around '*' and '-' to fix checkpatch issue.
Signed-off-by: Mamta Shukla <mamtashukla555@gmail.com>
Reviewed-by: Himanshu Jha <himanshujha199640@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mamta Shukla [Sat, 6 Oct 2018 11:26:36 +0000 (16:56 +0530)]
staging: vt6655: Add blank line after function/struct/union/enum declarations
Add blank line after function/struct/union/enum declarations to fix
checkpatch issue.
CHECK: Please use a blank line after function/struct/union/enum
declarations
Signed-off-by: Mamta Shukla <mamtashukla555@gmail.com>
Reviewed-by: Himanshu Jha <himanshujha199640@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mamta Shukla [Fri, 5 Oct 2018 07:32:06 +0000 (13:02 +0530)]
staging: mt7621-pci: Prefer using the BIT macro
Replace all occurrences of (1<<x) with BIT(x).
Signed-off-by: Mamta Shukla <mamtashukla555@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mamta Shukla [Fri, 5 Oct 2018 07:28:08 +0000 (12:58 +0530)]
staging: mt7621-pci: Add spaces around '<<'
Add spaces around '<<' to fix checkpatch issue.
CHECK: spaces preferred around that '<<' (ctx:VxV)
Signed-off-by: Mamta Shukla <mamtashukla555@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mamta Shukla [Fri, 5 Oct 2018 07:23:34 +0000 (12:53 +0530)]
staging: mt7621-pci: Add spaces around '|'
Add spaces around '|' to fix checkpatch issue
CHECK: spaces preferred around that '|' (ctx:VxV)
Signed-off-by: Mamta Shukla <mamtashukla555@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mamta Shukla [Fri, 5 Oct 2018 07:21:41 +0000 (12:51 +0530)]
staging: mt7621-pci: Add spaces around '&'
Add spaces around '&' to fix checkpatch issue.
CHECK: spaces preferred around that '&' (ctx:VxV)
Signed-off-by: Mamta Shukla <mamtashukla555@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mamta Shukla [Fri, 5 Oct 2018 07:19:38 +0000 (12:49 +0530)]
staging: mt7621-pci: Do not initialise statics to 0
Remove initialisation for static global variable to fix checkpatch issue.
ERROR: do not initialise statics to 0
Signed-off-by: Mamta Shukla <mamtashukla555@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mamta Shukla [Mon, 8 Oct 2018 19:00:10 +0000 (00:30 +0530)]
staging: rtl8723bs: core: Remove true and false comparison
Remove comparison to true and false in if statement.
Issue found with checkpatch.pl.
CHECK: Using comparison to true is error prone
CHECK: Using comparison to false is error prone
Signed-off-by: Mamta Shukla <mamtashukla555@gmail.com>
ACKed-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mamta Shukla [Fri, 5 Oct 2018 13:58:20 +0000 (19:28 +0530)]
staging: sm750fb: Remove space after cast
Remove space after cast to fix checkpatch issue.
CHECK: No space is necessary after a cast
Signed-off-by: Mamta Shukla <mamtashukla555@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ioannis Valasakis [Thu, 4 Oct 2018 12:41:01 +0000 (13:41 +0100)]
staging: clocking-wizard: match parenthesis indentation
Match parenthesis indentation after line end, and fixed alignment
to conform to the coding style guidelines.
Reported by checkpatch.
Signed-off-by: Ioannis Valasakis <code@wizofe.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ioannis Valasakis [Thu, 4 Oct 2018 10:13:21 +0000 (11:13 +0100)]
staging: axis-fifo: Remove parentheses in axis-fifo.c
staging: axis-fifo: remove parentheses in axis-fifo.c
Remove parentheses from the end of line and conform to
the coding style guidelines. Reported by checkpatch.
Add an extra space to the function arguments to fix
indentation.
Signed-off-by: Ioannis Valasakis <code@wizofe.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michael Straube [Wed, 3 Oct 2018 14:17:16 +0000 (16:17 +0200)]
staging: rtl8712: add SPDX identifiers
This satisfies a checkpatch warning and is the preferred
method for notating the license.
The SPDX identifier is a legally binding shorthand, which
can be used instead of the full boiler plate text.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mamta Shukla [Wed, 3 Oct 2018 14:40:15 +0000 (20:10 +0530)]
staging: fbtft: Prefer using the BIT macro
Replacing all occurrences of (1<<x) with BIT(x) to fix checkpatch issue.
CHECK:Prefer using the BIT macro
Signed-off-by: Mamta Shukla <mamtashukla555@gmail.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michael Straube [Sun, 30 Sep 2018 19:53:10 +0000 (21:53 +0200)]
staging: rtl8188eu: fix spelling mistake in comment
Fix a spelling mistake reported by checkpatch.
Caculate -> Calculate
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michael Straube [Sun, 30 Sep 2018 19:53:09 +0000 (21:53 +0200)]
staging: rtl8188eu: remove braces from single if statement
Remove braces from single line if statement.
Reported by checkpatch.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michael Straube [Sun, 30 Sep 2018 19:53:08 +0000 (21:53 +0200)]
staging: rtl8188eu: remove unnecessary parentheses in odm_rtl8188e.c
Remove unnecessary parentheses in odm_rtl8188e.c.
Reported by checkpatch.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michael Straube [Sun, 30 Sep 2018 19:53:07 +0000 (21:53 +0200)]
staging: rtl8188eu: add spaces around '+' in fw.c
Add spaces around '+' in fw.c to follow kernel coding style.
Reported by checkpatch.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michael Straube [Sun, 30 Sep 2018 19:53:06 +0000 (21:53 +0200)]
staging: rtl8188eu: simplify block comment in pwrseq.c
Simplify block comment to a single line to clear a checkpatch warning.
WARNING: Block comments use * on subsequent lines
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michael Straube [Sun, 30 Sep 2018 19:53:05 +0000 (21:53 +0200)]
staging: rtl8188eu: correct block comment in bb_cfg.c
Correct block comment to clear a checkpatch warning.
WARNING: Block comments should align the * on each line
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michael Straube [Sun, 30 Sep 2018 19:53:04 +0000 (21:53 +0200)]
staging: rtl8188eu: rename odm_SignalScaleMapping()
Rename odm_SignalScaleMapping to avoid CamelCase.
odm_SignalScaleMapping -> odm_signal_scale_mapping
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michael Straube [Sun, 30 Sep 2018 19:53:03 +0000 (21:53 +0200)]
staging: rtl8188eu: rename variable in odm_SignalScaleMapping()
Rename variable in odm_SignalScaleMapping() to avoid CamelCase.
RetSig -> retsig
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michael Straube [Sun, 30 Sep 2018 19:53:02 +0000 (21:53 +0200)]
staging: rtl8188eu: rename parameter of odm_SignalScaleMapping()
Rename parameter of odm_SignalScaleMapping() to avoid CamelCase.
CurrSig -> currsig
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michael Straube [Sun, 30 Sep 2018 19:53:01 +0000 (21:53 +0200)]
staging: rtl8188eu: rename odm_EVMdbToPercentage()
Rename odm_EVMdbToPercentage() to avoid CamelCase.
odm_EVMdbToPercentage -> odm_evm_db_to_percentage
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michael Straube [Sun, 30 Sep 2018 19:53:00 +0000 (21:53 +0200)]
staging: rtl8188eu: rename parameter of odm_EVMdbToPercentage()
Rename parameter of odm_EVMdbToPercentage() to avoid CamelCase.
Value -> value
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michael Straube [Sun, 30 Sep 2018 19:52:59 +0000 (21:52 +0200)]
staging: rtl8188eu: rename odm_QueryRxPwrPercentage()
Rename odm_QueryRxPwrPercentage() to avoid CamelCase.
odm_QueryRxPwrPercentage -> odm_query_rxpwrpercentage
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michael Straube [Sun, 30 Sep 2018 19:52:58 +0000 (21:52 +0200)]
staging: rtl8188eu: rename parameter of odm_QueryRxPwrPercentage()
Rename parameter of odm_QueryRxPwrPercentage() to avoid CamelCase.
AntPower -> antpower
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michael Straube [Sun, 30 Sep 2018 19:52:57 +0000 (21:52 +0200)]
staging: rtl8188eu: replace tabs with spaces in odm_hwconfig.c
Replace tabs with spaces in odm_hwconfig.c where appropriate.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michael Straube [Sun, 30 Sep 2018 19:52:56 +0000 (21:52 +0200)]
staging: rtl8188eu: add spaces around '*' in odm_hwconfig.c
Add spaces around '*' in odm_hwconfig.c to follow kernel coding style.
Reported by checkpatch.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michael Straube [Sun, 30 Sep 2018 19:52:55 +0000 (21:52 +0200)]
staging: rtl8188eu: add spaces around '+' in odm_hwconfig.c
Add spaces around '+' in odm_hwconfig.c to follow kernel coding style.
Reported by checkpatch.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michael Straube [Sun, 30 Sep 2018 19:52:54 +0000 (21:52 +0200)]
staging: rtl8188eu: remove wrapper odm_SignalScaleMapping()
The function odm_SignalScaleMapping() is just a wrapper for
odm_SignalScaleMapping_92CSeries().
Rename odm_SignalScaleMapping_92CSeries() to odm_SignalScaleMapping()
and remove the wrapper.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michael Straube [Sun, 30 Sep 2018 19:52:53 +0000 (21:52 +0200)]
staging: rtl8188eu: rename odm_HWConfig
Rename source and header file to avoid CamelCase.
odm_HWConfig.c -> odm_hwconfig.c
odm_HWConfig.h -> odm_hwconfig.h
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michael Straube [Sun, 30 Sep 2018 19:52:52 +0000 (21:52 +0200)]
staging: rtl8188eu: cleanup inconsistent indenting
Cleanup all inconsistent indenting reported by smatch.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aymen Qader [Sun, 30 Sep 2018 08:34:21 +0000 (09:34 +0100)]
staging: ks7010: Remove unnecessary null check
Remove the unnecessary socket buffer null check in hostif_data_request.
There is already an appropriate null check in the calling function:
(ks_wlan_net.c) ks_wlan_start_xmit
Signed-off-by: Aymen Qader <qader.aymen@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aymen Qader [Sat, 29 Sep 2018 17:38:07 +0000 (18:38 +0100)]
staging: sm750fb: Remove extra space character
Remove an extra space in ddk750_mode.c to fix indentation
Signed-off-by: Aymen Qader <qader.aymen@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rick Veens [Sun, 30 Sep 2018 18:29:19 +0000 (20:29 +0200)]
staging: rtlwifi: Removed unused define and code efuse_re_pg* from wifi.h
The following:
bool efuse_re_pg_sec1flag;
u8 efuse_re_pg_data[8];
are not referenced anywhere in the rtlwifi code.
Signed-off-by: Rick Veens <rickveens92@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alexey Khoroshilov [Fri, 28 Sep 2018 21:25:27 +0000 (00:25 +0300)]
staging: axis-fifo: add error handling of class_create()
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Christian Gromm [Fri, 28 Sep 2018 21:37:19 +0000 (23:37 +0200)]
staging: most: usb: add release function for DCI device
This patch adds the missing release function for the DCI device that frees
the container structure it is embedded in.
Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Deepa Dinamani [Sat, 29 Sep 2018 01:41:40 +0000 (18:41 -0700)]
MAINTAINERS: removed staging/ft1000 driver
Delete the ft1000 MAINTAINERS entry, concluding the
earlier removal of the driver in commit
6512edec48b2
("staging: ft1000: remove obsolete driver").
Reported-by: Joe Perches <joe@perches.com>
Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aymen Qader [Sat, 29 Sep 2018 17:24:29 +0000 (18:24 +0100)]
staging: rtlwifi: Return -ENOMEM instead of -1
Use the ENOMEM constant instead of -1 for kzalloc failure checks in
rtl_halmac.c
Signed-off-by: Aymen Qader <qader.aymen@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nishad Kamdar [Mon, 1 Oct 2018 14:48:31 +0000 (20:18 +0530)]
staging: mt7621-mmc: Remove unused single statement macros
This patch removes unused single statement macros in sd.c
Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nishad Kamdar [Mon, 1 Oct 2018 14:46:05 +0000 (20:16 +0530)]
staging: mt7621-mmc: Remove single statement macro msdc_irq_restore()
This patch removes the macro msdc_irq_restore() and replaces its
usage with call to the function called in the macro definition.
Issue found by checkpatch.
Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Tue, 2 Oct 2018 22:14:14 +0000 (15:14 -0700)]
staging: dgnc: delete the driver
Digi does not support it, no one has hardware for it, and no one is
working on it, so let's drop it for now. If anyone wants to pick it
back up, then can revert this patch.
Reported-by: Lidza Louina <lidza.louina@gmail.com>
Reported-by: Mark Hounschell <markh@compro.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sehro Rautenkranz [Tue, 25 Sep 2018 23:41:59 +0000 (17:41 -0600)]
staging: dgnc: Fix Kconfig help header and text
Replace Kconfig help header and text to match other modules. Issue found
by checkpatch.
Spacing adjusted to match Documentation/process/coding-style.rst. Issue
reported by rdunlap@infradead.org.
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Sehro Rautenkranz <sehro@sehro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Colin Ian King [Sun, 30 Sep 2018 23:10:51 +0000 (00:10 +0100)]
staging: rtl8723bs: clean up clang warning on extraneous parentheses
There are extraneous parantheses that are causing clang to produce a
warning so remove these.
Clean up 3 clang warnings:
equality comparison with extraneous parentheses [-Wparentheses-equality]
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dafna Hirschfeld [Sat, 29 Sep 2018 15:55:08 +0000 (18:55 +0300)]
staging: rtl8712: Remove unnecessary parentheses
Remove unnecessary parentheses between 'address-of' operators
and struct members.
Issues found with checkpatch.pl
Signed-off-by: Dafna Hirschfeld <dafna3@gmail.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nathan Chancellor [Wed, 26 Sep 2018 23:20:55 +0000 (16:20 -0700)]
staging: rtl8723bs: Mark ACPI table declaration as used
Clang emits the following warning:
drivers/staging/rtl8723bs/os_dep/sdio_intf.c:25:36: warning: variable
'acpi_ids' is not needed and will not be emitted
[-Wunneeded-internal-declaration]
static const struct acpi_device_id acpi_ids[] = {
^
1 warning generated.
Mark acpi_ids with the attribute __used, which makes it clear to Clang
that we don't want this warning while not inhibiting Clang's dead code
elimination from removing the unreferenced internal symbol when moving
the data to the globally available symbol with MODULE_DEVICE_TABLE.
$ nm -S drivers/staging/rtl8723bs/os_dep/sdio_intf.o | grep acpi
0000000000000000 0000000000000040 R __mod_acpi__acpi_ids_device_table
Link: https://github.com/ClangBuiltLinux/linux/issues/169
Suggested-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dafna Hirschfeld [Sun, 30 Sep 2018 19:04:04 +0000 (22:04 +0300)]
staging: mt7621-mmc: replace `printk` with preferred API
Replace calls to `printk` with `dev_info` and `pr_err`
Issues found with checkpatch.pl
Signed-off-by: Dafna Hirschfeld <dafna3@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dafna Hirschfeld [Sun, 30 Sep 2018 19:04:03 +0000 (22:04 +0300)]
staging: mt7621-mmc: Fix comparison to NULL
Replace comparisons of a variable 'x' to NULL with
either 'x' or '!x'.
Issues found with checkpatch.pl
Signed-off-by: Dafna Hirschfeld <dafna3@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dafna Hirschfeld [Sun, 30 Sep 2018 19:04:02 +0000 (22:04 +0300)]
staging: mt7621-mmc: remove unnecessary braces from 'if' statements
Remove unnecessary braces from one line 'if' statements.
Issues found with checkpatch.pl
Signed-off-by: Dafna Hirschfeld <dafna3@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Tue, 2 Oct 2018 01:13:42 +0000 (18:13 -0700)]
Merge tag 'iio-for-4.20b' of git://git./linux/kernel/git/jic23/iio into staging-next
Jonathan writes:
Second set of IIO new device support features and cleanup for the 4.20 cycle.
One merge commit in here to bring in the SPI_CS_WORD flag patches
that are also going via the SPI tree.
There are a few more fixes than normal for a pull targetting the
next merge window. These are all long term issues and as we are late
in the cycle, they can wait.
New device support
* ad7606
- Add support fo the ad7605-4 driver. This driver is still in staging
but is heading in the right direction to graduate, motivated partly
by the requirement for this device support.
* ST VL53L0X ToF ranging sensor
- New minimal driver. Interrupt support to follow.
New features
* SPI_CS_WORD optimization allows long transfers with the chip select
toggled every 16bits. There is a software fallback as well to let
drivers not care about whether the hardware supports it.
* bh1750
- Device tree support and bindings.
* ti-ads7950
- Use the SPI_CS_WORD optmization to save lots of cpu cycles (assuming
the hardware supports it)
Fixes and cleanups
* ad5064
- Fix some long incorrect regulator error handling that preventing
enabling the internal regulator.
* ad7606
- The ad7606 doesn't actually have a 2.5V range and the values provided
for scale have always been wrong. Fix them.
- Drop some wrong kernel-doc (things that don't exist)
- Add missing kernel-doc
* at91-adc
- Fixing missing ack of dataready on sysfs channel reads to avoid spurious
interrupts.
- Fix a wrong channel numbers in triggered_buffer_mode
* hmc5843
- Fix incorrect part number in a comment.
* imx25-gcq
- Fix a device_node leak in an error path.
* meson-saradc
- Drop an unused and pointless define.
- Use of_device_get_match_data instead of opencoding
- Tidy up how meson_sar_adc_param is accessed.
- Rework prior to adding some temperature sensor support.
* tag 'iio-for-4.20b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio:
iio: ad5064: Fix regulator handling
iio: adc: meson-saradc: use the address attribute from iio_chan_spec
iio: adc: meson-saradc: do not use meson_sar_adc_iio_channels directly
iio: adc: at91: fix wrong channel number in triggered buffer mode
iio: adc: at91: fix acking DRDY irq on simple conversions
iio: adc: meson-saradc: simplify access to meson_sar_adc_param
iio: adc: meson-saradc: use of_device_get_match_data
iio: adc: meson-saradc: remove #define MESON_SAR_ADC_DELTA_10_TS_C_SHIFT
iio: light: bh1750: Add device tree support
dt-bindings: iio: light: bh1750: Add device tree binding documentation
staging:iio:ad7606: Add support for the ad7605-4
iio: proximity: Add driver support for ST's VL53L0X ToF ranging sensor.
staging:iio:ad7606: update structs with doc annotations
iio: magnetometer: hmc5843: Fixed a comment error.
iio: adc: imx25-gcq: Fix leak of device_node in mx25_gcq_setup_cfgs()
iio: adc: ti-ads7950: use SPI_CS_WORD to reduce CPU usage
spi: add software implementation for SPI_CS_WORD
spi: add new SPI_CS_WORD flag
staging:iio:ad7606: Remove incorrect kernel doc annotations
staging:iio:ad7606: fix voltage scales
Hans de Goede [Sat, 29 Sep 2018 12:18:25 +0000 (14:18 +0200)]
staging: vboxvideo: Use more drm_fb_helper functions
Store fbhelper and afb struct directly in vbox_private and use
drm_fb_helper_fbdev_setup to replace vbox_fbdev_init, note we cannot use
drm_fb_helper_fbdev_teardown since we use a private framebuffer for the
fbdev.
And replace vbox_driver_lastclose with drm_fb_helper_lastclose.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hans de Goede [Sat, 29 Sep 2018 12:18:24 +0000 (14:18 +0200)]
staging: vboxvideo: Drop unnecessary drm_connector_helper_funcs callbacks
vbox_mode_valid always returns MODE_OK, which is also the default if no
mode_valid callback is defined.
vbox_best_single_encoder chains to drm_encoder_find, the drm-core will
call drm_encoder_find itself if there is no best_encoder call back.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hans de Goede [Sat, 29 Sep 2018 12:18:23 +0000 (14:18 +0200)]
staging: vboxvideo: Call drm_atomic_helper_check_plane_state from atomic_check
Extend our planes atomic_check callbacks to be more thorough by calling
the drm_atomic_helper_check_plane_state helper.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>