Daniel González Cabanelas [Sun, 20 Feb 2022 18:19:50 +0000 (19:19 +0100)]
media: cx88-mpeg: clear interrupt status register before streaming video
Some cx88 video cards may have transport stream status interrupts set
to 1 from cold start, causing errors like this:
cx88xx: cx88_print_irqbits: core:irq mpeg [0x100000] ts_err?*
cx8802: cx8802_mpeg_irq: mpeg:general errors: 0x00100000
According to CX2388x datasheet, the interrupt status register should be
cleared before enabling IRQs to stream video.
Fix it by clearing the Transport Stream Interrupt Status register.
Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com>
Jernej Skrabec [Sat, 12 Feb 2022 07:42:41 +0000 (08:42 +0100)]
media: cedrus: H265: Fix neighbour info buffer size
Neighbour info buffer size needs to be 794 kiB in H6. This is actually
already indirectly mentioned in the comment, but smaller size is used
nevertheless.
Increase buffer size to cover H6 needs. Since increase is not that big
in absolute numbers, it doesn't make sense to complicate logic for older
generations.
Bug was discovered using iommu, which reported access error when trying
to play H265 video.
Fixes:
86caab29da78 ("media: cedrus: Add HEVC/H.265 decoding support")
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Julia Lawall [Thu, 10 Feb 2022 20:42:20 +0000 (21:42 +0100)]
media: fsl-viu: use GFP_KERNEL
Platform_driver probe functions aren't called with locks held
and thus don't need GFP_ATOMIC. Use GFP_KERNEL instead.
Problem found with Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Julia Lawall [Thu, 10 Feb 2022 20:42:16 +0000 (21:42 +0100)]
media: cx18: use GFP_KERNEL
Pci_driver probe functions aren't called with locks held
and thus don't need GFP_ATOMIC. Use GFP_KERNEL instead.
Problem found with Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Christian Hewitt [Wed, 9 Feb 2022 15:31:50 +0000 (15:31 +0000)]
drivers: meson: vdec: add VP9 support to GXM
VP9 support for GXM appears to have been missed from the original
codec submission [0] but it works well, so let's add support.
[0] https://github.com/torvalds/linux/commit/
00c43088aa680989407b6afbda295f67b3f123f1
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Xose Vazquez Perez [Tue, 8 Feb 2022 16:12:22 +0000 (17:12 +0100)]
stkwebcam: add new Asus laptop to upside_down table
Handle 0x0001, DMI type 1, 27 bytes
System Information
Manufacturer: ASUSTeK Computer Inc.
Product Name: A6JC
Version: 1.0
Serial Number: XXXXXXXXXXXXXXXXX
UUID: XXXXXXXXXXXXXXXXX
Wake-up Type: Power Switch
SKU Number: To Be Filled By O.E.M.
Family: To Be Filled By O.E.M.
Handle 0x0002, DMI type 2, 15 bytes
Base Board Information
Manufacturer: ASUSTeK Computer Inc.
Product Name: A6JC
Version: 1.0
Serial Number: XXXXXXXXXXXXXXXXX
Asset Tag: To Be Filled By O.E.M.
Features:
Board is a hosting board
Board is replaceable
Location In Chassis: To Be Filled By O.E.M.
Chassis Handle: 0x0003
Type: Motherboard
Contained Object Handles: 0
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: MEDIA ML <linux-media@vger.kernel.org>
Signed-off-by: Xose Vazquez Perez <xose.vazquez@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Ming Qian [Mon, 7 Feb 2022 06:28:43 +0000 (14:28 +0800)]
media: imx-jpeg: fix a bug of accessing array out of bounds
When error occurs in parsing jpeg, the slot isn't acquired yet, it may
be the default value MXC_MAX_SLOTS.
If the driver access the slot using the incorrect slot number, it will
access array out of bounds.
The result is the driver will change num_domains, which follows
slot_data in struct mxc_jpeg_dev.
Then the driver won't detach the pm domain at rmmod, which will lead to
kernel panic when trying to insmod again.
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Reviewed-by: Mirela Rabulea <mirela.rabulea@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Mikhail Rudenko [Sat, 5 Feb 2022 23:33:31 +0000 (02:33 +0300)]
media: sun6i-csi: fix colorspace in sun6i_video_try_fmt()
With gstreamer 1.19.3 all attempts to capture video in YUV formats on
our Allwinner H3-based custom board with an ov5640 sensor result in
pipeline crashes with the following messages:
Device '/dev/video0' does not support 2:0:0:0 colorimetry
Additional debug info:
Device wants 2:0:0:0 colorimetry
Fix this by setting the correct colorspace in sun6i_video_try_fmt().
Signed-off-by: Mikhail Rudenko <mike.rudenko@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Dan Carpenter [Wed, 2 Feb 2022 17:52:01 +0000 (20:52 +0300)]
media: usb: go7007: s2250-board: fix leak in probe()
Call i2c_unregister_device(audio) on this error path.
Fixes:
d3b2ccd9e307 ("[media] s2250: convert to the control framework")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Jernej Skrabec [Tue, 1 Feb 2022 18:33:24 +0000 (19:33 +0100)]
media: cedrus: Add watchdog for job completion
Currently, if job is not completed for whatever reason, userspace
application can hang on ioctl and thus become unkillable.
In order to prevent that, implement watchdog, which will complete job
after 2 seconds with error state.
Concept is borrowed from hantro driver.
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Hans Verkuil [Tue, 1 Feb 2022 07:23:48 +0000 (08:23 +0100)]
pixfmt-yuv-planar.rst: fix typo: 'Cr, Cr' -> 'Cr, Cb'
Several NV formats incorrectly described the Chroma order as
Cr, Cr when it actually is Cr, Cb.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reported-by: Frank Barchard <fbarchard@google.com>
Yang Li [Tue, 1 Feb 2022 06:07:57 +0000 (14:07 +0800)]
media: imx-jpeg: Remove unnecessary print function dev_err()
The print function dev_err() is redundant because platform_get_irq()
already prints an error.
Eliminate the follow coccicheck warning:
./drivers/media/platform/imx-jpeg/mxc-jpeg.c:2025:3-10: line 2025 is
redundant because platform_get_irq() already prints an error
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Yang Li [Tue, 1 Feb 2022 04:04:31 +0000 (12:04 +0800)]
media: aspeed: Remove duplicated include in aspeed-video.c
Fix following includecheck warning:
./drivers/media/platform/aspeed-video.c: linux/videodev2.h is included
more than once.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Colin Ian King [Sun, 30 Jan 2022 23:21:40 +0000 (23:21 +0000)]
media: saa7164: remove redundant assignment to variable idx
Variable idx is being assigned a value that is never read, it is being
re-assigned a new value in the following for-loop. The assignment is
redundant and can be removed.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Colin Ian King [Sun, 30 Jan 2022 23:15:20 +0000 (23:15 +0000)]
media: saa7134: remove redundant assignment to variable id
Variable id is being assigned a value that is never read. The
assignment is redundant and can be removed.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Colin Ian King [Sun, 30 Jan 2022 23:11:11 +0000 (23:11 +0000)]
media: mtk-jpeg: remove redundant initialization of variable plane_fmt
The variable plane_fmt is being initialized with a value that is never
read, it is being re-assigned a new value on each iteration of a for
loop. The initialization is redundant and can be removed.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Colin Ian King [Sun, 30 Jan 2022 22:31:03 +0000 (22:31 +0000)]
media: gspca: remove redundant assignment of variable n
The variable n is being assigned a value that is never read, it is
being reassigned a different value a few statements later. The
assignment is redundant and can be removed.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Yunfei Dong [Fri, 28 Jan 2022 03:23:30 +0000 (11:23 +0800)]
media: uapi: Init VP9 stateless decode params
Init some of VP9 frame decode params to default value.
Fixes:
b88dbe38dca8 ("media: uapi: Add VP9 stateless decoder controls")
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Rikard Falkeborn [Tue, 25 Jan 2022 23:46:02 +0000 (00:46 +0100)]
media: go7007: Constify static struct snd_device_ops
The only usage of go7007_snd_device_ops is to pass its address to
snd_device_new() which takes a pointer to const struct snd_device_ops.
Make it const to allow the compiler to put it in read-only memory.
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Colin Ian King [Sun, 23 Jan 2022 23:07:26 +0000 (23:07 +0000)]
media: saa7115: make static read-only array lcr2vbi const
The static array lcr2vbi is read-only so it make sense to make
it const.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Dongliang Mu [Sat, 22 Jan 2022 07:44:59 +0000 (15:44 +0800)]
media: em28xx: initialize refcount before kref_get
The commit
47677e51e2a4("[media] em28xx: Only deallocate struct
em28xx after finishing all extensions") adds kref_get to many init
functions (e.g., em28xx_audio_init). However, kref_init is called too
late in em28xx_usb_probe, since em28xx_init_dev before will invoke
those init functions and call kref_get function. Then refcount bug
occurs in my local syzkaller instance.
Fix it by moving kref_init before em28xx_init_dev. This issue occurs
not only in dev but also dev->dev_next.
Fixes:
47677e51e2a4 ("[media] em28xx: Only deallocate struct em28xx after finishing all extensions")
Reported-by: syzkaller <syzkaller@googlegroups.com>
Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Gustavo A. R. Silva [Thu, 20 Jan 2022 21:24:34 +0000 (15:24 -0600)]
media: usb: pwc-uncompress: Use struct_size() helper in pwc_decompress()
Make use of the struct_size() helper instead of an open-coded version,
in order to avoid any potential type mistakes or integer overflows that,
in the worst scenario, could lead to heap overflows.
Also, address the following sparse warnings:
drivers/media/usb/pwc/pwc-uncompress.c:44:44: warning: using sizeof on a flexible structure
Link: https://github.com/KSPP/linux/issues/174
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Benjamin Gaignard [Thu, 20 Jan 2022 08:59:09 +0000 (09:59 +0100)]
media: platform: mtk-vcodec: Do not force /dev/videoX node number
Let's v4l2 framework use a free /dev/videoX node for decode and encoder.
For the decoder call video_register_device() before register the media
controller device so the mapping between ins correctly done.
Since the registering sequence has changed rework exiting errors case too.
Fixes:
590577a4e525 ("[media] vcodec: mediatek: Add Mediatek V4L2 Video Decoder Driver")
Fixes:
4e855a6efa54 ("[media] vcodec: mediatek: Add Mediatek V4L2 Video Encoder Driver")
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Jammy Huang [Mon, 14 Feb 2022 08:09:09 +0000 (16:09 +0800)]
media: aspeed: Use of_device_get_match_data() helper
Use of_device_get_match_data() to simplify the code.
Signed-off-by: Jammy Huang <jammy_huang@aspeedtech.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Jammy Huang [Thu, 10 Feb 2022 09:29:45 +0000 (17:29 +0800)]
media: aspeed: Use full swing as JFIF to fix incorrect color
Current settings for video capture rgb-2-yuv is BT.601(studio swing),
but JFIF uses BT.601(full swing) to deocde. This mismatch will lead
to incorrect color. For example, input RGB value, (0, 0, 255), will
become (16, 16, 235) after jpg decoded.
Add an enum, aspeed_video_capture_format, to define VR008[7:6]
capture format and correct default settings for video capture to fix
the problem.
VR008[7:6] decides the data format for video capture as below:
* 00: CCIR601 studio swing compliant YUV format
* 01: CCIR601 full swing compliant YUV format
* 10: RGB format
* 11: Gray color mode
Signed-off-by: Jammy Huang <jammy_huang@aspeedtech.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Jammy Huang [Wed, 26 Jan 2022 01:47:25 +0000 (09:47 +0800)]
media: aspeed: Fix unstable timing detection
Using stable-signal in resolution detection, and try detection again
if unstable.
VE_MODE_DETECT_EXTSRC_ADC: 1 if video source is from ADC output.
VE_MODE_DETECT_H_STABLE: 1 if horizontal signal detection is stable.
VE_MODE_DETECT_V_STABLE: 1 if vertical signal detection is stable.
Signed-off-by: Jammy Huang <jammy_huang@aspeedtech.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Jammy Huang [Wed, 26 Jan 2022 01:47:24 +0000 (09:47 +0800)]
media: aspeed: Add macro for the fields of the mode-detect registers
VE_MODE_DT_HOR_TOLER: the tolerance in detecting for stable horizontal
signal.
VE_MODE_DT_VER_TOLER: the tolerance in detecting for stable vertical
signal.
VE_MODE_DT_HOR_STABLE: the minimum required count in detecting stable
HSYNC signal to set mode detection horizontal signal stable.
VE_MODE_DT_VER_STABLE: the minimum required count in detecting stable
VSYNC signal to set mode detection vertical signal stable.
Signed-off-by: Jammy Huang <jammy_huang@aspeedtech.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Jammy Huang [Tue, 7 Dec 2021 01:54:11 +0000 (09:54 +0800)]
media: aspeed: add comments and macro
Add comments to describe video-stat and 'struct aspeed_video'.
Add macro, ASPEED_VIDEO_V4L2_MIN_BUF_REQ, to describe the buffers
needed.
Signed-off-by: Jammy Huang <jammy_huang@aspeedtech.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
[hverkuil: drop docbook tags, not needed]
Niklas Söderlund [Mon, 24 Jan 2022 12:48:58 +0000 (13:48 +0100)]
media: rcar-{csi2,vin}: Move to full Virtual Channel routing per CSI-2 IP
When Gen3 support was first added to this R-Car VIN and CSI-2 driver the
routing was centred around the CHSEL register which multiplexes the
different parallel buses that sit between the CSI-2 receivers source
side and the VIN dma engines. This was a bad design as the multiplexing
do allow for only a few combinations and do not play nice with many
video streams in the system.
For example it's only possible for CSI-2 Virtual Channels 0 and 1 of any
given CSI-2 receiver to be used together with the scaler.
Later datasheets have expanded the documentation and it is now possible
to improve on this design by allowing any Virtual Channel to be routed
to any R-Car VIN instance, provided that there exists a parallel bus
between them. This increases the flexibility as all Virtual Channels can
now be used together with the scaler for example.
The redesign is not however perfect. While the new design allows for
many more routes, two constrains limit a small portion of routes that
was possible in the old design but are no more.
- It is no longer possible to route the same CSI-2 and VC to more then
one VIN at a time. This was theoretically possible before if the
specific SoC allowed for the same CSI-2 and VC to be routed to two
different VIN capture groups.
- It is no longer possible to simultaneously mix links from two CSI-2 IP
blocks to the same VIN capture group.
For example if VIN2 is capturing from CSI40 then VIN{0,1,3} must also
capture from CSI40. While VIN{4,5,6,7} is still free to capture from
any other CSI-2 IP in the system. Once all VIN{0,1,2,3} links to CSI40
are disabled that VIN capture group is free again to capture from any
other CSI-2 IP it is connected to.
At the core of the redesign is greater cooperator of the R-Car VIN and
CSI-2 drivers in configuring the routing. The VIN driver is after this
change only responsible to configure the full VIN capture groups
parallel buses to be to a particular CSI-2 IP. While the configuration
of which CSI-2 Virtual Channel is outputted on which of the R-Car CSI-2
IP output ports is handled by the CSI-2 driver.
Before this change the CSI-2 Virtual Channel to output port was static
in the CSI-2 driver and the different links only manipulated the VIN
capture groups CHSEL register. With this change both the CHSEl register
and the CSI-2 routing VCDT registers are modified for greater
flexibility.
This change touches both the R-Car VIN and R-Car CSI-2 drivers in the
same commit as both drivers cooperate closely and one change without the
other would more or less break video capture.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Tested-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
[hverkuil: fix two trivial checkpatch whitespace issues]
Niklas Söderlund [Mon, 24 Jan 2022 12:48:57 +0000 (13:48 +0100)]
media: rcar-vin: Breakout media link creation
In preparation of creating more links to allow for full Virtual Channel
routing within the CSI-2 block break out the link creation logic to a
helper function as the logic will grow in future work.
There is no functional change.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Tested-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Niklas Söderlund [Mon, 24 Jan 2022 12:48:56 +0000 (13:48 +0100)]
media: rcar-vin: Refactor link notify
The code has grown organically and a lot of checks are performed for
the CSI-2 use-case even if the link notify is for a subdevice connected
to the parallel interface.
Before reworking the CSI-2 routing logic split the CSI-2 and parallel
link notify code in two separate blocks to make it clearer. There is no
functional change.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Tested-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Laurent Pinchart [Sun, 23 Jan 2022 15:58:17 +0000 (16:58 +0100)]
media: xilinx: csi2rxss: Use mipi-csi2.h
Replace the driver-specific definitions of MIPI CSI-2 data types with
macros from mipi-csi2.h.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Laurent Pinchart [Sun, 23 Jan 2022 15:58:17 +0000 (16:58 +0100)]
media: rcar-csi2: Use mipi-csi2.h
Replace the hardcoded MIPI CSI-2 data types with macros from
mipi-csi2.h.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Laurent Pinchart [Sun, 23 Jan 2022 15:58:17 +0000 (16:58 +0100)]
media: rcar-isp: Use mipi-csi2.h
Replace the hardcoded MIPI CSI-2 data types with macros from
mipi-csi2.h.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Laurent Pinchart [Sun, 23 Jan 2022 15:36:19 +0000 (16:36 +0100)]
media: Define MIPI CSI-2 data types in a shared header file
There are many CSI-2-related drivers in the media subsystem that come
with their own macros to handle the CSI-2 data types (or just hardcode
the numerical values). Provide a shared header with definitions for
those data types that driver can use.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Nikita Yushchenko [Thu, 20 Jan 2022 08:15:30 +0000 (09:15 +0100)]
media: vsp1: mask interrupts before enabling
VSP hardware could be used (e.g. by the bootloader) before driver load,
and some interrupts could be left in enabled and pending state. In this
case, setting up VSP interrupt handler without masking interrupts before
causes interrupt handler to be immediately called (and crash due to null
vsp->info dereference).
Fix that by explicitly masking all interrupts before setting the interrupt
handler. To do so, have to set the interrupt handler later, after hw
revision is already detected and number of interrupts to mask gets
known.
Based on patch by Koji Matsuoka <koji.matsuoka.xm@renesas.com> included
in the Renesas BSP kernel.
Signed-off-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Paul Pawlowski [Wed, 26 Jan 2022 10:37:13 +0000 (11:37 +0100)]
media: uvcvideo: Add support for Apple T2-attached FaceTime HD Camera
Adds the requisite device id to support detection of the Apple FaceTime
HD webcam exposed over the T2 BCE VHCI interface.
Tested-by: Aun-Ali Zaidi <admin@kodeit.net>
Signed-off-by: Paul Pawlowski <paul@mrarm.io>
Signed-off-by: Aun-Ali Zaidi <admin@kodeit.net>
Signed-off-by: Aditya Garg <gargaditya08@live.com>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Alexander Stein [Fri, 11 Feb 2022 14:27:48 +0000 (15:27 +0100)]
media: staging: media: imx: imx7_mipi_csis: Store colorspace in set_fmt as well
Without this the default (SMPTE 170M) from init_cfg stays unchanged.
Even after configuring 'srgb' colorspace (or 'raw')
$ media-ctl -V "'csis-
32e30000.mipi-csi':0 [colorspace:srgb]"
the colorspace does not change at all:
$ media-ctl --get-v4l2 "'csis-
32e30000.mipi-csi':0"
[fmt:SRGGB10_1X10/1920x1080 field:none colorspace:smpte170m xfer:709
ycbcr:601 quantization:lim-range]
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Zhou Qingyang [Mon, 24 Jan 2022 17:20:01 +0000 (18:20 +0100)]
media: ti-vpe: cal: Fix a NULL pointer dereference in cal_ctx_v4l2_init_formats()
In cal_ctx_v4l2_init_formats(), devm_kzalloc() is assigned to
ctx->active_fmt and there is a dereference of it after that, which could
lead to NULL pointer dereference on failure of devm_kzalloc().
Fix this bug by adding a NULL check of ctx->active_fmt.
This bug was found by a static analyzer.
Builds with 'make allyesconfig' show no new warnings, and our static
analyzer no longer warns about this code.
Fixes:
7168155002cf ("media: ti-vpe: cal: Move format handling to cal.c and expose helpers")
Signed-off-by: Zhou Qingyang <zhou1615@umn.edu>
Reviewed-by: Pratyush Yadav <p.yadav@ti.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Dan Carpenter [Tue, 1 Feb 2022 13:00:16 +0000 (14:00 +0100)]
media: i2c: ov08d10: Unlock on error in ov08d10_enum_frame_size()
This error path needs to drop the mutex to avoid a deadlock.
Fixes:
7be91e02ed57 ("media: i2c: Add ov08d10 camera sensor driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Bingbu Cao [Wed, 29 Dec 2021 08:57:39 +0000 (09:57 +0100)]
media: ov5675: use group write to update digital gain
MWB gain register are used to set gain for each mwb channel mannually.
However, it will involve some artifacts at low light environment as gain
cannot be applied to each channel synchronously. Update the driver to use
group write for digital gain to make the sure RGB digital gain be applied
together at frame boundary.
Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Martin Kepplinger [Tue, 11 Jan 2022 13:39:37 +0000 (14:39 +0100)]
media: dt-bindings: media: hynix,hi846: add link-frequencies description
link-frequencies is required but only mentioned in the example. Add
it to the description.
Fixes:
f3ce7200ca18 ("media: dt-bindings: media: document SK Hynix Hi-846 MIPI CSI-2 8M pixel sensor")
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Martin Kepplinger [Tue, 11 Jan 2022 13:39:36 +0000 (14:39 +0100)]
media: dt-binding: media: hynix,hi846: use $defs/port-base port description
This fixes "make dt_binding_check":
Documentation/devicetree/bindings/media/i2c/hynix,hi846.example.dt.yaml:
camera@20: port:endpoint: Unevaluated properties are not allowed
('link-frequencies', 'data-lanes' were unexpected)
From schema: Documentation/devicetree/bindings/media/i2c/hynix,hi846.yaml
[Sakari Ailus: Reword commit message]
Fixes:
f3ce7200ca18 ("media: dt-bindings: media: document SK Hynix Hi-846 MIPI CSI-2 8M pixel sensor")
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Kees Cook [Mon, 24 Jan 2022 17:29:52 +0000 (18:29 +0100)]
media: omap3isp: Use struct_group() for memcpy() region
In preparation for FORTIFY_SOURCE performing compile-time and run-time
field bounds checking for memcpy(), memmove(), and memset(), avoid
intentionally writing across neighboring fields. Wrap the target region
in struct_group(). This additionally fixes a theoretical misalignment
of the copy (since the size of "buf" changes between 64-bit and 32-bit,
but this is likely never built for 64-bit).
FWIW, I think this code is totally broken on 64-bit (which appears to
not be a "real" build configuration): it would either always fail (with
an uninitialized data->buf_size) or would cause corruption in userspace
due to the copy_to_user() in the call path against an uninitialized
data->buf value:
omap3isp_stat_request_statistics_time32(...)
struct omap3isp_stat_data data64;
...
omap3isp_stat_request_statistics(stat, &data64);
int omap3isp_stat_request_statistics(struct ispstat *stat,
struct omap3isp_stat_data *data)
...
buf = isp_stat_buf_get(stat, data);
static struct ispstat_buffer *isp_stat_buf_get(struct ispstat *stat,
struct omap3isp_stat_data *data)
...
if (buf->buf_size > data->buf_size) {
...
return ERR_PTR(-EINVAL);
}
...
rval = copy_to_user(data->buf,
buf->virt_addr,
buf->buf_size);
Regardless, additionally initialize data64 to be zero-filled to avoid
undefined behavior.
Link: https://lore.kernel.org/lkml/20211215220505.GB21862@embeddedor
Cc: Arnd Bergmann <arnd@arndb.de>
Fixes:
378e3f81cb56 ("media: omap3isp: support 64-bit version of omap3isp_stat_data")
Cc: stable@vger.kernel.org
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Laurent Pinchart [Wed, 5 Jan 2022 20:15:58 +0000 (21:15 +0100)]
media: v4l2-mediabus: Drop V4L2_MBUS_CSI2_CONTINUOUS_CLOCK flag
MIPI CSI-2 continuous and non-continuous clock modes are mutually
exclusive. Drop the V4L2_MBUS_CSI2_CONTINUOUS_CLOCK flag and use
V4L2_MBUS_CSI2_NONCONTINUOUS_CLOCK only.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Laurent Pinchart [Mon, 3 Jan 2022 16:24:13 +0000 (17:24 +0100)]
media: v4l2-mediabus: Drop legacy V4L2_MBUS_CSI2_CHANNEL_* flags
The V4L2_MBUS_CSI2_CHANNEL_* flags are a legacy API. Only
V4L2_MBUS_CSI2_CHANNEL_0 is used, set in a single driver, and never
read. Drop those flags. Virtual channel information should be conveyed
through frame descriptors instead.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Laurent Pinchart [Mon, 3 Jan 2022 16:24:12 +0000 (17:24 +0100)]
media: v4l2-mediabus: Drop legacy V4L2_MBUS_CSI2_*_LANE flags
The V4L2_MBUS_CSI2_*_LANE flags are a legacy API and are unused. Drop
them.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Laurent Pinchart [Mon, 3 Jan 2022 16:24:11 +0000 (17:24 +0100)]
media: v4l2-mediabus: Use structures to describe bus configuration
The media bus configuration is specified through a set of flags, some of
which being mutually exclusive. This doesn't scale to express more
complex configurations. Improve the API by replacing the single flags
field in v4l2_mbus_config by a union of v4l2_mbus_config_* structures.
The flags themselves are still used in those structures, so they are
kept here. Drivers are however updated to use structure fields instead
of flags when already possible.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Sakari Ailus [Wed, 2 Feb 2022 09:31:44 +0000 (10:31 +0100)]
media: microchip-csi2dc: Remove VC support for now
As part of removing mbus config flags, remove VC flag use in the
microchip-csi2dc driver. The support can be reintroduced later on as part
of the streams patches.
[mchehab: patch accepted by Eugen: https://lore.kernel.org/linux-media/
c0676a4e-803f-9f1c-542b-
4b007705ef3d@microchip.com/, so add an accepted-by tag]
Accepted-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Robert Foss [Mon, 6 Dec 2021 15:18:10 +0000 (16:18 +0100)]
media: camss: csiphy: Move to hardcode CSI Clock Lane number
QCOM ISPs do not support having a programmable CSI Clock Lane number.
In order to accurately reflect this, the different CSIPHY HW versions
need to have their own register layer for computing lane masks.
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Tom Rix [Thu, 12 Aug 2021 17:01:46 +0000 (19:01 +0200)]
media: video/hdmi: handle short reads of hdmi info frame.
Calling hdmi_infoframe_unpack() with static sizeof(buffer) skips all
the size checking done later in hdmi_infoframe_unpack(). A better
value is the amount of data read into buffer.
Fixes:
480b8b3e42c3 ("video/hdmi: Pass buffer size to infoframe unpack functions")
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Laurent Pinchart [Fri, 30 Jul 2021 13:18:29 +0000 (15:18 +0200)]
media: vimc: Add support for contiguous DMA buffers
The vimc driver is used for testing purpose, and some test use cases
involve sharing buffers with a consumer device. Consumers often require
DMA contiguous memory, which vimc doesn't currently support. This leads
in the best case to usage of bounce buffers, which is very slow, and in
the worst case in a complete failure.
Add support for the dma-contig allocator in vimc to support those use
cases properly. The allocator is selected through a new "allocator"
module parameter, which defaults to vmalloc.
[hverkuil: add missing 'select VIDEOBUF2_DMA_CONFIG' to Kconfig]
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Neil Armstrong [Thu, 3 Jun 2021 08:42:15 +0000 (10:42 +0200)]
media: mexon-ge2d: fixup frames size in registers
The CLIP, SRC & DST registers are coded to take the pixel/line start & end,
starting from 0. Thus the end should be the width/height minus 1.
It can be an issue with clipping and rotation, where it will add spurious
lines from uninitialized or unwanted data with a shift in the result.
Fixes:
59a635327ca7 ("media: meson: Add M2M driver for the Amlogic GE2D Accelerator Unit")
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Maxime Jourdan [Thu, 15 Aug 2019 14:44:48 +0000 (16:44 +0200)]
media: s5p_mfc_dec: set flags for OUTPUT coded formats
Tag all the coded formats where the s5p_mfc decoder supports dynamic
resolution switching or has a bytestream parser.
Signed-off-by: Maxime Jourdan <mjourdan@baylibre.com>
Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Tsuchiya Yuto [Sun, 17 Oct 2021 16:23:33 +0000 (18:23 +0200)]
media: atomisp: fix dummy_ptr check to avoid duplicate active_bo
The dummy_ptr check in hmm_init() [1] results in the following
"hmm_init Failed to create sysfs" error exactly once every
two times on atomisp reload by rmmod/insmod (although atomisp module
loads and works fine regardless of this error):
[ 140.230662] sysfs: cannot create duplicate filename '/devices/pci0000:00/0000:00:03.0/active_bo'
[ 140.230668] CPU: 1 PID: 2502 Comm: insmod Tainted: G C OE 5.15.0-rc4-1-surface-mainline #1
b8acf6eb64994414b2e20bad312a7a2c45f748f9
[ 140.230675] Hardware name: OEMB OEMB/OEMB, BIOS 1.51116.238 03/09/2015
[ 140.230678] Call Trace:
[ 140.230687] dump_stack_lvl+0x46/0x5a
[ 140.230702] sysfs_warn_dup.cold+0x17/0x24
[ 140.230710] sysfs_add_file_mode_ns+0x160/0x170
[ 140.230717] internal_create_group+0x126/0x390
[ 140.230723] hmm_init+0x5c/0x70 [atomisp
7a6a680bf400629363d2a6f58fd10e7299678b99]
[ 140.230811] atomisp_pci_probe.cold+0x1136/0x148e [atomisp
7a6a680bf400629363d2a6f58fd10e7299678b99]
[ 140.230875] local_pci_probe+0x45/0x80
[ 140.230882] ? pci_match_device+0xd7/0x130
[ 140.230887] pci_device_probe+0xfa/0x1b0
[ 140.230892] really_probe+0x1f5/0x3f0
[ 140.230899] __driver_probe_device+0xfe/0x180
[ 140.230903] driver_probe_device+0x1e/0x90
[ 140.230908] __driver_attach+0xc0/0x1c0
[ 140.230912] ? __device_attach_driver+0xe0/0xe0
[ 140.230915] ? __device_attach_driver+0xe0/0xe0
[ 140.230919] bus_for_each_dev+0x89/0xd0
[ 140.230924] bus_add_driver+0x12b/0x1e0
[ 140.230929] driver_register+0x8f/0xe0
[ 140.230933] ? 0xffffffffc153f000
[ 140.230937] do_one_initcall+0x57/0x220
[ 140.230945] do_init_module+0x5c/0x260
[ 140.230952] load_module+0x24bd/0x26a0
[ 140.230962] ? __do_sys_finit_module+0xae/0x110
[ 140.230966] __do_sys_finit_module+0xae/0x110
[ 140.230972] do_syscall_64+0x5c/0x80
[ 140.230979] ? syscall_exit_to_user_mode+0x23/0x40
[ 140.230983] ? do_syscall_64+0x69/0x80
[ 140.230988] ? exc_page_fault+0x72/0x170
[ 140.230991] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 140.230997] RIP: 0033:0x7f7fd5d8718d
[ 140.231003] Code: b4 0c 00 0f 05 eb a9 66 0f 1f 44 00 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d b3 6c 0c 00 f7 d8 64 89 01 48
[ 140.231006] RSP: 002b:
00007ffefc25f0e8 EFLAGS:
00000246 ORIG_RAX:
0000000000000139
[ 140.231012] RAX:
ffffffffffffffda RBX:
000055ac3edcd7f0 RCX:
00007f7fd5d8718d
[ 140.231015] RDX:
0000000000000000 RSI:
000055ac3d723270 RDI:
0000000000000003
[ 140.231017] RBP:
0000000000000000 R08:
0000000000000000 R09:
00007f7fd5e52380
[ 140.231019] R10:
0000000000000003 R11:
0000000000000246 R12:
000055ac3d723270
[ 140.231021] R13:
0000000000000000 R14:
000055ac3edd06e0 R15:
0000000000000000
[ 140.231038] atomisp-isp2 0000:00:03.0: hmm_init Failed to create sysfs
The problem is that dummy_ptr == 0 is a valid value. So, change the logic
which checks if dummy_ptr was allocated.
At this point, atomisp now gives WARN_ON() in hmm_free() [2] on atomisp
reload by rmmod/insmod. Again, the check is wrong there.
So, change both checks for mmgr_EXCEPTION, which is the error value when
HMM allocation fails, and initialize dummy_ptr with such value.
[1] added on commit
d9ab83953fa7 ("media: atomisp: don't cause a warn if probe failed")
[2] added on commit
b83cc378dfc4 ("atomisp: clean up the hmm init/cleanup indirections")
Link: https://lore.kernel.org/linux-media/20211017162337.44860-3-kitakar@gmail.com
Signed-off-by: Tsuchiya Yuto <kitakar@gmail.com>
Co-developed-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Moses Christopher Bollavarapu [Sun, 6 Feb 2022 18:52:32 +0000 (19:52 +0100)]
media: staging: media: atomisp: Use BIT macro instead of left shifting
There is a BIT(nr) macro available in Linux Kernel,
which does the same thing.
Example: BIT(7) = (1UL << 7)
Link: https://lore.kernel.org/linux-media/20220206185232.21726-1-mosescb.dev@gmail.com
Signed-off-by: Moses Christopher Bollavarapu <mosescb.dev@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Colin Ian King [Sun, 9 Jan 2022 19:51:29 +0000 (20:51 +0100)]
media: atomisp: make array idx_map static const
Don't populate the read-only array idx_map on the stack but
instead it static const. Also makes the object code a little smaller.
Link: https://lore.kernel.org/linux-media/20220109195129.46118-1-colin.i.king@gmail.com
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Hans de Goede [Sun, 16 Jan 2022 21:52:04 +0000 (22:52 +0100)]
media: atomisp_gmin_platform: Add DMI quirk to not turn AXP ELDO2 regulator off on some boards
The TrekStor SurfTab duo W1 10.1 has a hw bug where turning eldo2 back on
after having turned it off causes the CPLM3218 ambient-light-sensor on
the front camera sensor's I2C bus to crash, hanging the bus.
Add a DMI quirk table for systems on which to leave eldo2 on.
Note an alternative fix is to turn off the CPLM3218 ambient-light-sensor
as long as the camera sensor is being used, this is what Windows seems
to do as a workaround (based on analyzing the DSDT). But that is not
easy to do cleanly under Linux.
Link: https://lore.kernel.org/linux-media/20220116215204.307649-10-hdegoede@redhat.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Hans de Goede [Sun, 16 Jan 2022 21:52:03 +0000 (22:52 +0100)]
media: atomisp_gmin_platform: Base CsiPort default on detected CLK
On devices with 2 cameras and no _DSM / EFI-vars providing CsiPort
clock info, defaulting to CsiPort 0 obviously is wrong for 1 of the
2 cameras.
The Intel Cherry Trail (ISP2401) reference design combines:
pmc_plt_clk_2 with CsiPort 0
pmc_plt_clk_4 with CsiPort 1
The Intel Bay Trail (ISP2400) reference design combines:
pmc_plt_clk_1 with CsiPort 0
pmc_plt_clk_0 with CsiPort 1
Use this knowledge to set the default CsiPort value based on
the detected CLK for the sensor.
Link: https://lore.kernel.org/linux-media/20220116215204.307649-9-hdegoede@redhat.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Hans de Goede [Sun, 16 Jan 2022 21:52:02 +0000 (22:52 +0100)]
media: atomisp_gmin_platform: Do not turn ELDO2 off from axp_v1p8_on()
Fix axp_v1p8_on() turning ELDO2 off at the end again by removing the bogus
code which turns it off again after just having turned it on.
Link: https://lore.kernel.org/linux-media/20220116215204.307649-8-hdegoede@redhat.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Hans de Goede [Sun, 16 Jan 2022 21:52:01 +0000 (22:52 +0100)]
media: atomisp_gmin_platform: Set ELDO1 to 1.6V on devices with an AXP288 PMIC
Testing on multiple tablet models has shown that Android always uses
1.6V for ELDO1, adjust our code to match.
This also matches with how ELDO1 is used in the DSDTs on these devices,
where for Cherry Trail (ISP2401) based devices ELDO1 is used for an
ACPI power-resource which is named "P16P".
Note on Bay Trail (ISP2400) based devices the power-resource is called
"P15P", which suggests that 1.5V might be a better value there.
Link: https://lore.kernel.org/linux-media/20220116215204.307649-7-hdegoede@redhat.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Hans de Goede [Sun, 16 Jan 2022 21:52:00 +0000 (22:52 +0100)]
media: atomisp_gmin_platform: Add enable-count to gmin_[v1p8|v2p8]_ctrl()
On devices with 2 sensors the 2 sensors may get probed simultaneously
and the v1p8 and v2p8 regulators are ususally shared between the
2 sensors.
This means that the probe() function of sensor 1 may end up calling
gmin_v1p8_ctrl(..., false) turning the regulator off while sensor 2's
probe() function still needs it to be on, causing the probe() of
sensor 2 to sometimes fail.
Fix this by adding an enable-count for both regulators and only
disabling them again when that goes to 0.
Note all this really should be converted to use the standard kernel
regulator framework, I have doing this on my long term TODO list,
this fix is only meant as a temporary workaround for the issue.
Link: https://lore.kernel.org/linux-media/20220116215204.307649-6-hdegoede@redhat.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Hans de Goede [Sun, 16 Jan 2022 21:51:59 +0000 (22:51 +0100)]
media: atomisp_gmin_platform: Fix axp_regulator_set() writing to the wrong register
The second write done in axp_regulator_set() must go to the ctrl_reg which
turns the various regulators on/off. This replaces the second write
writing the sel_reg, which sets the voltage for the regulator, for a
second time with a wrong value.
Link: https://lore.kernel.org/linux-media/20220116215204.307649-5-hdegoede@redhat.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Hans de Goede [Sun, 16 Jan 2022 21:51:58 +0000 (22:51 +0100)]
media: atomisp: Use irci_stable_candrpv_0415_20150423_1753 fw for byt
There is no irci_stable_candrpv_0415_20150521_0458 build for the
isp2400/byt version of the atomisp2. There is however an
irci_stable_candrpv_0415_20150423_1753 version which according to:
https://github.com/intel/ProductionKernelQuilts/blob/master/uefi/cht-m1stable/patches/cam-041
Has the exact same fw ABI, so use that on the isp2400.
Link: https://lore.kernel.org/linux-media/20220116215204.307649-4-hdegoede@redhat.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Hans de Goede [Sun, 16 Jan 2022 21:51:57 +0000 (22:51 +0100)]
media: atomisp: Don't use ifdef ISP2400
IPS2400 is never defined, for ISP2401 builds ISP2401 gets defined and
for ISP2400 nothing gets defined, so any #ifdef ISP2400 checks should
be #ifndef ISP2401 checks instead.
Link: https://lore.kernel.org/linux-media/20220116215204.307649-3-hdegoede@redhat.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Hans de Goede [Sun, 16 Jan 2022 21:51:56 +0000 (22:51 +0100)]
media: atomisp: Don't use ifdef on IS_ISP2401
IS_ISP2401 is a function like macro which is always defined, so it must
not be used together with #ifdef. #ifdef checks should check for
"ISP2401", not "IS_ISP2401".
Link: https://lore.kernel.org/linux-media/20220116215204.307649-2-hdegoede@redhat.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Sean Young [Sat, 15 Jan 2022 10:19:11 +0000 (11:19 +0100)]
media: lirc: report ir receiver overflow
If the driver reports that the hardware had an overflow, report this to
userspace. It would be nice to know when this happens, and not just get
a long space.
This change has been tested with lircd, ir-ctl, and ir-keytable.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Sean Young [Sat, 15 Jan 2022 10:12:35 +0000 (11:12 +0100)]
media: rc-core: rename ir_raw_event_reset to ir_raw_event_overflow
The driver report a reset event when the hardware reports and overflow.
There is no reason to have a generic "reset" event.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Sean Young [Thu, 13 Jan 2022 10:20:22 +0000 (11:20 +0100)]
media: lirc: remove unused lirc features
These features have never been implemented by any lirc driver, including
staging or out of tree drivers. The ioctls for these feaures were removed
in commit
d55f09abe24b ("[media] lirc.h: remove several unused ioctls").
So, we can safely remove them.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Jammy Huang [Tue, 25 Jan 2022 06:44:09 +0000 (07:44 +0100)]
media: aspeed: Correct values for detected timing
Correct timing's fp/sync/bp value based on the information below.
It should be noticed that the calculation formula should be changed
per sync polarity.
The sequence of signal: sync - backporch - video data - frontporch
The following registers start counting from sync's rising edge:
1. VR090: frame edge's left and right
2. VR094: frame edge's top and bottom
3. VR09C: counting from sync's rising edge to falling edge
[Vertical timing]
+--+ +-------------------+ +--+
| | | v i d e o | | |
+--+ +-----+ +-----+ +---+
vsync+--+
frame_top+--------+
frame_bottom+----------------------------+
+-------------------+
| v i d e o |
+--+ +-----+ +-----+ +---+
| | | |
+--+ +--+
vsync+-------------------------------+
frame_top+-----+
frame_bottom+-------------------------+
[Horizontal timing]
+--+ +-------------------+ +--+
| | | v i d e o | | |
+--+ +-----+ +-----+ +---+
hsync+--+
frame_left+--------+
frame_right+----------------------------+
+-------------------+
| v i d e o |
+--+ +-----+ +-----+ +---+
| | | |
+--+ +--+
hsync+-------------------------------+
frame_left+-----+
frame_right+-------------------------+
Ex. 1920x1200@60 whose vsync polarity is negative
VR098:
c4d3efff, VR09C:
04cc001f
v-total = 0x4D3 (VR098[27:16]) = 1235
v-sync = 0x4CC (VR09C[27:16]) = 1228
[hverkuil: drop unused variable mds]
Signed-off-by: Jammy Huang <jammy_huang@aspeedtech.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Jammy Huang [Tue, 25 Jan 2022 06:44:08 +0000 (07:44 +0100)]
media: aspeed: Use FIELD_GET to improve readability
Use the bitfield macro FIELD_GET, and GENMASK to do the shift and mask in
one go for reg values.
Signed-off-by: Jammy Huang <jammy_huang@aspeedtech.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Jammy Huang [Tue, 25 Jan 2022 06:44:07 +0000 (07:44 +0100)]
media: aspeed: Correct value for h-total-pixels
Previous reg-field, 0x98[11:0], stands for the period of the detected
hsync signal.
Use the correct reg, 0xa0, to get h-total in pixels.
Fixes:
d2b4387f3bdf ("media: platform: Add Aspeed Video Engine driver")
Signed-off-by: Jammy Huang <jammy_huang@aspeedtech.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Jammy Huang [Wed, 12 Jan 2022 06:07:25 +0000 (07:07 +0100)]
media: aspeed: Fix no complete irq for non-64-aligned width
In ast2500, engine will stop occasionally for 1360x768.
This is a bug which has been addressed, but the workaround is specific
for 1680 only. Here we make it more complete.
Signed-off-by: Jammy Huang <jammy_huang@aspeedtech.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Jammy Huang [Tue, 7 Dec 2021 01:41:47 +0000 (02:41 +0100)]
media: aspeed: add more debug log messages
The new messages are listed as below:
1. jpeg header and capture buffer information
2. information for each irq
3. current capture mode, sync or direct-fetch
4. time consumed for each frame
5. input timing changed information
[hverkuil: use %pad for dma_addr_t to avoid compiler warnings]
Signed-off-by: Jammy Huang <jammy_huang@aspeedtech.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Jammy Huang [Tue, 7 Dec 2021 01:41:46 +0000 (02:41 +0100)]
media: aspeed: use v4l2_info/v4l2_warn/v4l2_dbg for log
The debug log level, 0~3, is controlled by module_param, debug.
The higher the value, the more the information.
0: off
1: info
2: debug
3: register operations
Signed-off-by: Jammy Huang <jammy_huang@aspeedtech.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Angus Ainslie [Thu, 20 Jan 2022 11:14:53 +0000 (12:14 +0100)]
media: i2c: dw9714: add optional regulator support
Allow the dw9714 to control a regulator and adjust suspend() and resume()
to support both runtime and system pm.
Signed-off-by: Angus Ainslie <angus@akkea.ca>
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Bingbu Cao [Thu, 13 Jan 2022 00:18:48 +0000 (01:18 +0100)]
media: ov2740: identify module after subdev initialisation
The module identifying will try to get the sub device data which
will be ready after sub device initialisation, so if try to use the
subdev data to deference the client will cause NULL pointer
dereference, this patch move the module identification after
v4l2_i2c_subdev_init() to fix this issue, it also fixes duplicate
module idendification.
Fixes:
ada2c4f54d0a ("media: ov2740: support device probe in non-zero ACPI D state")
Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Philippe Cornu [Thu, 13 Jan 2022 17:19:21 +0000 (18:19 +0100)]
media: MAINTAINERS: update drm/stm drm/sti and cec/sti maintainers
Add Alain as sti maintainer for both drm/sti & cec/sti.
Add Raphaël as stm maintainer for drm/stm.
Signed-off-by: Philippe Cornu <philippe.cornu@foss.st.com>
Reviewed-by: Alain Volmat <alain.volmat@foss.st.com>
Reviewed-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Benjamin Gaignard [Thu, 13 Jan 2022 17:19:20 +0000 (18:19 +0100)]
media: MAINTAINERS: Update Benjamin Gaignard maintainer status
Update Benjamin Gaignard address and remove it from no more maintained
drivers.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: Philippe Cornu <philippe.cornu@foss.st.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Laurent Pinchart [Thu, 13 Jan 2022 20:51:50 +0000 (21:51 +0100)]
media: i2c: max9286: Implement media entity .link_validate() operation
The MAX9286 has sink pads, so it should implement .link_validate(). Do
so.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
kernel test robot [Wed, 19 Jan 2022 05:24:47 +0000 (06:24 +0100)]
media: ov5693: fix returnvar.cocci warnings
drivers/media/i2c/ov5693.c:953:5-8: Unneeded variable: "ret". Return "0" on line 985
Remove unneeded variable used to store return value.
Generated by: scripts/coccinelle/misc/returnvar.cocci
[Sakari Ailus: Improved subject]
CC: Daniel Scally <djrscally@gmail.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: kernel test robot <lkp@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
kernel test robot [Wed, 19 Jan 2022 05:24:42 +0000 (06:24 +0100)]
media: ov5693: fix boolconv.cocci warnings
drivers/media/i2c/ov5693.c:989:46-51: WARNING: conversion to bool not needed here
drivers/media/i2c/ov5693.c:991:46-51: WARNING: conversion to bool not needed here
Remove unneeded conversion to bool
Semantic patch information:
Relational and logical operators evaluate to bool,
explicit conversion is overly verbose and unneeded.
Generated by: scripts/coccinelle/misc/boolconv.cocci
[Sakari Ailus: Improved subject]
CC: Daniel Scally <djrscally@gmail.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: kernel test robot <lkp@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Jimmy Su [Wed, 12 Jan 2022 05:42:55 +0000 (06:42 +0100)]
media: i2c: Add ov08d10 camera sensor driver
Add a v4l2 sub-device driver for the OmniVision ov08d10 image sensor.
This camera sensor is using the i2c bus for control and the
csi-2 bus for data.
The following features are supported:
- manual exposure and analog/digital gain control
- vblank/hblank control
- test pattern
- image vertical flip and horizontal mirror control
- supported resolution:
- 3280x2460 at 30 FPS
- 3264x2448 at 30 FPS
- 1632x1224 at 30 FPS
- supported bayer order output:
- SGRBG10 as default
- SBGGR10 at flip mode
- SRGGB10 at mirror mode
- SGBRG10 at flip + mirror mode
Signed-off-by: Jimmy Su <jimmy.su@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Shawn Tu [Tue, 11 Jan 2022 15:08:27 +0000 (16:08 +0100)]
media: hi847: Add support for Hi-847 sensor
Add a V4L2 sub-device driver for Hynix Hi-847 image sensor.
This is a camera sensor using the I2C bus for control and the
CSI-2 bus for data.
This driver supports following features:
- manual exposure and analog/digital gain control support
- vblank/hblank control support
- test pattern support
- media controller support
- runtime PM support
- vflip/hflip control support
- keep SGRBG10 Bayer order output
- support following resolutions:
+ 3264x2448 at 30FPS
+ 1632x1224 at 60FPS
[Sakari Ailus: Wrapped a few long lines.]
Signed-off-by: Shawn Tu <shawnx.tu@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Sakari Ailus [Wed, 19 Jan 2022 08:44:59 +0000 (09:44 +0100)]
media: ov8865: Fix indentation in set_selection callback
Fixed wrong indentation in set_selection callback.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Sakari Ailus [Mon, 10 Jan 2022 16:16:51 +0000 (17:16 +0100)]
media: ov5648: Don't pack controls struct
Don't pack the driver specific struct containing control pointers. This
lead to potential alignment issues when working with the pointers.
Reported-by: kernel test robot <lkp@intel.com>
Fixes:
e43ccb0a045f ("media: i2c: Add support for the OV5648 image sensor")
Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Sakari Ailus [Mon, 10 Jan 2022 14:53:12 +0000 (15:53 +0100)]
media: v4l: Avoid unaligned access warnings when printing 4cc modifiers
Pointers V4L2 pixelformat and dataformat fields in a few packed structs
are directly passed to printk family of functions. This could result in an
unaligned access albeit no such possibility appears to exist at the
moment i.e. this clang warning appears to be a false positive.
Address the warning by copying the pixelformat or dataformat value to a
local variable first.
Reported-by: kernel test robot <lkp@intel.com>
Fixes:
e927e1e0f0dd ("v4l: ioctl: Use %p4cc printk modifier to print FourCC codes")
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Janusz Krzysztofik [Mon, 4 May 2020 17:10:12 +0000 (19:10 +0200)]
media: ov6650: Fix missing frame interval enumeration support
According to v4l2-compliance utility, a video device which supports
V4L2_CAP_TIMEPERFRAME via .vidioc_s_parm() operation should also
support .vidioc_enum_frameintervals(). If the former is implemented
via a call to v4l2_s_parm_cap() which in turn calls a subdevice
.s_frame_interval() pad operation, the video device may want to
implement the latter by passing frame interval enumeration requests to
the subdevice .enum_frame_intervals() video operation. If that
operation is not supported by the subdevice and failure is returned by
the video device, the compliance test issues a warning.
Implement the missing pad operation. Enumerate frame intervals
possible to be set via pixel clock adjustment, as implemented by
.s_frame_interval(), but not exceeding a reasonable maximum of 1
second.
[Sakari Ailus: Rebased on mbus config pad op patches]
Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Janusz Krzysztofik [Sun, 3 May 2020 22:06:18 +0000 (00:06 +0200)]
media: ov6650: Fix crop rectangle affected by set format
According to subdevice interface specification found in V4L2 API
documentation, set format pad operations should not affect image
geometry set in preceding image processing steps. Unfortunately, that
requirement is not respected by the driver implementation of set format
as it was not the case when that code was still implementing a pair of
now obsolete .s_mbus_fmt() / .try_mbus_fmt() video operations before
they have been merged and reused as an implementation of .set_fmt() pad
operation by commit
717fd5b4907a ("[media] v4l2: replace try_mbus_fmt
by set_fmt").
Exclude non-compliant crop rectangle adjustments from set format try,
as well as a call to .set_selection() from set format active processing
path, so only frame scaling is applied as needed and crop rectangle is
no longer modified.
[Sakari Ailus: Rebase on subdev state patches]
Fixes:
717fd5b4907a ("[media] v4l2: replace try_mbus_fmt by set_fmt")
Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Janusz Krzysztofik [Sun, 3 May 2020 22:06:17 +0000 (00:06 +0200)]
media: ov6650: Add try support to selection API operations
Try requests are now only supported by format processing pad operations
implemented by the driver. The driver selection API operations
currently respond to them with -EINVAL. While that is correct, it
constraints video device drivers to not use subdevice cropping at all
while processing user requested active frame size, otherwise their set
try format results might differ from active. As a consequence, we
can't fix set format pad operation as not to touch crop rectangle since
that would affect users not being able to set arbitrary frame sizes.
Moreover, without a working set try selection support we are not able
to use pad config crop rectangle as a reference while processing set
try format requests.
Implement missing try selection support. Moreover, as it will be now
possible to maintain the pad config crop rectangle via selection API,
start using it instead of the active one as a reference while
processing set try format requests.
is_unscaled_ok() helper, now also called from set selection operation,
has been just moved up in the source file to avoid a prototype, with no
functional changes.
[Sakari Ailus: Rebase on subdev state patches]
Fixes:
717fd5b4907a ("[media] v4l2: replace try_mbus_fmt by set_fmt")
Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Janusz Krzysztofik [Sun, 3 May 2020 22:06:16 +0000 (00:06 +0200)]
media: ov6650: Fix set format try processing path
According to subdevice interface specification found in V4L2 API
documentation, set format pad operations should not affect image
geometry set in preceding image processing steps. Unfortunately, that
requirement is not respected by the driver implementation of set format
as it was not the case when that code was still implementing a pair of
now obsolete .s_mbus_fmt() / .try_mbus_fmt() video operations before
they have been merged and reused as an implementation of .set_fmt() pad
operation by commit
717fd5b4907a ("[media] v4l2: replace try_mbus_fmt
by set_fmt").
In case of set format active processing path the issue can be fixed
easily by excluding a call to set active selection from that path. That
will effectively limit frame size processing to optimal frame scaling
against active crop rectangle without touching it. Users can just call
set active selection themselves to obtain desired frame size. However,
set format try processing path needs more work.
First of all, the driver should be extended with set try selection
support. Lack of it constraints video device drivers to not use
subdevice cropping at all while processing user requested active frame
size, otherwise their set try format results might differ from active.
Next, set format try processing path should use pad config crop
rectangle as a reference, not the active one as it does now. That
issue can be resolved easily as soon as set try selection support is
added to the driver so pad config crop rectangle can be maintained by
users via selection API.
Last, set format try processing path should give the same results as
active in respect to active vs. pad config crop rectangle geometry.
Both rectangles should be either not touched by set format (that's what
we are going to achieve) or modified the same way, otherwise users
won't be able to obtain equal results from both paths while iterating
through set format and set selection operations in order to obtain
desired frame size.
We can't begin with modifying set format pad operation as not to touch
crop rectangle since that depends on availability of set try selection
for symmetry. Neither can we begin with adding set try selection since
that in turn depends on equal handling of active and pad config crop
rectangles by set format. We can either implement all required
modifications in a single patch, or begin with fixing current set
format try processing path to appropriately handle pad config crop
rectangle. This patch implements the latter approach as believed to
be more readable.
Move crop rectangle adjustments code from a helper (the former
implementation of .s_fmt(), now called from set format active
processing path) to the body of set format pad operation function
where it can be also used for processing try requests for symmetry with
active ones. As the helper no longer processes frame geometry, only
frame format and half scaling, simplify its API accordingly and update
its users.
Moreover, extract code that applies crop rectangle hardware limits
(now a part of .set_selection() operation which is called from set
format active processing path) to a new helper and call that helper
from set format try processing path as well for symmetry with active.
[Sakari Ailus: Rebase on subdev state patches]
Fixes:
717fd5b4907a ("[media] v4l2: replace try_mbus_fmt by set_fmt")
Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Laurent Pinchart [Mon, 3 Jan 2022 16:24:10 +0000 (17:24 +0100)]
media: v4l2-fwnode: Move bus config structure to v4l2_mediabus.h
To prepare for usage of the v4l2_fwnode_bus_* data structures to
describe bus configuration in the subdev .get_mbus_config() operation,
rename the structures with a v4l2_mbus_config_ prefix instead of
v4l2_fwnode_bus_, and move them to v4l2_mediabus.h.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Laurent Pinchart [Mon, 3 Jan 2022 16:24:09 +0000 (17:24 +0100)]
media: v4l2-subdev: Drop .set_mbus_config() operation
The .set_mbus_config() operation is deprecated, and nothing in the
kernel uses it. Drop it.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Laurent Pinchart [Mon, 3 Jan 2022 16:24:08 +0000 (17:24 +0100)]
media: i2c: ov6650: Drop implementation of .set_mbus_config()
The subdev .set_mbus_config() operation is deprecated. No code in the
kernel calls it, so drop its implementation from the ov6650 driver.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Laurent Pinchart [Mon, 3 Jan 2022 16:24:07 +0000 (17:24 +0100)]
media: pxa_camera: Drop usage of .set_mbus_config()
The subdev .set_mbus_config() operation is deprecated and will be
dropped. Drop its usage from the pxa_camera driver, querying the sensor
bus configuration instead of setting it. Only the ov6650 driver supports
the operation, any platform that experiences issues with this change
should update the ov6650 configuration to match what pxa_camera
supports.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Robert Foss [Mon, 6 Dec 2021 15:18:11 +0000 (16:18 +0100)]
media: dt-bindings: media: camss: Remove clock-lane property
The clock-lanes property is not programmable by the hardware,
and as such it should not be exposed in the dt-binding.
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Yong Wu [Mon, 17 Jan 2022 07:05:08 +0000 (08:05 +0100)]
media: memory: mtk-smi: Get rid of mtk_smi_larb_get/put
After adding device_link between the iommu consumer and smi-larb,
the pm_runtime_get(_sync) of smi-larb and smi-common will be called
automatically. we can get rid of mtk_smi_larb_get/put.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Evan Green <evgreen@chromium.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Acked-by: Matthias Brugger <matthias.bgg@gmail.com>
Reviewed-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Tested-by: Frank Wunderlich <frank-w@public-files.de> # BPI-R2/MT7623
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Yong Wu [Mon, 17 Jan 2022 07:05:07 +0000 (08:05 +0100)]
media: mtk-vcodec: Get rid of mtk_smi_larb_get/put
MediaTek IOMMU has already added the device_link between the consumer
and smi-larb device. If the vcodec devices call the pm_runtime_get_sync,
the smi-larb's pm_runtime_get_sync also be called automatically.
CC: Irui Wang <irui.wang@mediatek.com>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Evan Green <evgreen@chromium.org>
Acked-by: Tiffany Lin <tiffany.lin@mediatek.com>
Reviewed-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Yong Wu [Mon, 17 Jan 2022 07:05:06 +0000 (08:05 +0100)]
media: drm/mediatek: Get rid of mtk_smi_larb_get/put
MediaTek IOMMU has already added the device_link between the consumer
and smi-larb device. If the drm device calls the pm_runtime_get_sync,
the smi-larb's pm_runtime_get_sync also be called automatically.
CC: CK Hu <ck.hu@mediatek.com>
CC: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Reviewed-by: Evan Green <evgreen@chromium.org>
Acked-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Reviewed-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Tested-by: Frank Wunderlich <frank-w@public-files.de> # BPI-R2/MT7623
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Yongqiang Niu [Mon, 17 Jan 2022 07:05:05 +0000 (08:05 +0100)]
media: drm/mediatek: Add pm runtime support for ovl and rdma
Prepare for smi cleaning up "mediatek,larb".
Display use the dispsys device to call pm_rumtime_get_sync before.
This patch add pm_runtime_xx with ovl and rdma device whose nodes has
"iommus" property, then display could help pm_runtime_get for smi via
ovl or rdma device.
(Yong: Use pm_runtime_resume_and_get instead of pm_runtime_get_sync)
CC: CK Hu <ck.hu@mediatek.com>
Signed-off-by: Yongqiang Niu <yongqiang.niu@mediatek.com>
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Acked-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Tested-by: Frank Wunderlich <frank-w@public-files.de> # BPI-R2/MT7623
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>