rtpjitterbuffer: Add property to throttle handling of RTCP SR / NTP-64 syncing

This proxies the "rtcp-sync-interval" property of rtpbin.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2132>

rtpsession: Handle RTCP-SR-REQ (RFC6051) RTCP feedback message

This causes an RTCP SR to be sent at the earliest possible time.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2132>

rtpbin/rtpjitterbuffer: Allow syncing to an SR without CNAME if the CNAME is already known

The RTCP SR packet might be without SDES in case of a reduced-size RTCP
packet. For syncing purposes the CNAME is needed but it might be known
already from an earlier RTCP packet or out of band, via the SDP for
example.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2132>

rtpbin/jitterbuffer: Use inband 64-bit NTP timestamps according to RFC6051 for faster synchronization

When signalled via the caps that the header extension is used, it will
be read and used in the same way as the RTP/NTP time mapping from RTCP
SRs.

If the CNAME of the stream's SSRC is provided out of band via e.g. the
SDP then this allows streams to be synchronized immediately on the first
packet instead of having to wait for the first RTCP SR to arrive.

Fixes https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/issues/383

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2132>

rtpsession: Only add send latency to the running time if it is actually known

Otherwise we can't know the running time yet if rtcp-sync-send-time is
set, and have to wait until the latency is known later.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2132>

rtpsession: Update 64-bit NTP header extensions with the actual NTP time in senders

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2132>

rtpmanager: Add header extension implementation for the 64-bit RFC6051 NTP header extension

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2132>

sdp: Parse the RFC5576 Source-specific media SDP attributes into caps

The format of the caps fields is
    ssrc-(SSRC_VALUE)-(ATTRIBUTE_NAME)=(ATTRIBUTE_VALUE)
.

Parsing of the attributes from the caps into the SDP is not implemented
as this depends not only a single stream's caps but on the whole rtpbin
configuration.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2132>

rtsp-server: Add RFC5576 Source-specific media attribute to the SDP media for signalling the CNAME

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2132>

dashsink: Unlock when failed to get content

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2242>

gstglmixerbin: minor refactor of _find_element_pad_template

As suggested by @slomo, make the loop more readable and prevent returning
a garbage value to the caller from the previous implementation.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2232>

gstav1parse: fixup various possible logical errors

Found via an analyzed build for Clang. Specifically we had:

gstav1parse.c[1850,11] in gst_av1_parse_detect_stream_format: Logic error: The left operand of '==' is a garbage value
gstav1parse.c[1606,11] in gst_av1_parse_handle_to_small_and_equal_align: Logic error: The left operand of '==' is a garbage value

Also a couple of false-positives:

gstav1parse.c[1398,24] in gst_av1_parse_handle_one_obu: Logic error: Branch condition evaluates to a garbage value
gstav1parse.c[1440,37] in gst_av1_parse_handle_one_obu: Logic error: The left operand of '-' is a garbage value

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2230>

Always define ENABLE_NLS

GLib guarantees libintl API is always available, provided by
proxy-libintl as last resort. GLib itself unconditionally define
ENABLE_NLS.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2028>

Delete unused i18n headers

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2028>

Replace gst-i18n-*.h with gi18n-lib.h

GLib guarantees libintl is always present, using proxy-libintl as
last resort. There is no need to mock gettex API any more.

This fix static build on Windows because G_INTL_STATIC_COMPILATION must
be defined before including libintl.h, and glib does it for us as part
as including glib.h.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2028>

gst-play: Do not split translatable string

Concatenating N_() strings does not work with gi18n.h macro, was working
only with GStreamer's redefinition.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2028>

cuda: Fix typo in gst_cuda_buffery_copy_type_to_string

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1472>

cuda: Add a `gst_cuda_context_new_wrapped` constructor

So that application or people implementing cuda element from
outside GStreamer itself can ensure that their contexts are used
by GStreamer.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1472>

cuda: Factor out a public GstCUDA library

So applications and elements implemented outside GStreamer can reuse
our infrastructure

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1472>

nvenc: Give more details about errors

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1472>

video: Fix possible overrun when iterating comp[] array

Fix 2 iterations that can overrun the array if the number of component is
equal to the size of the array.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2239>

Revert "video-frame: avoid possible out of bound memory access"

This reverts commit c4255f08f787ff6a41504b538fa4c2e911d40ec7.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2239>

meson_options: declare glib and gobject checks at top level

This makes it easier to specify this features for all subprojects.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2238>

meson: Add -Wl,-rpath,${libdir} on macOS

We made the gstreamer installation prefix relocatable by picking up
plugins relative to the location of libgstreamer-1.0.dylib, similar to
how it's done for Windows:

https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1627

This had a lot of side-effects:

https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/1051
https://gitlab.freedesktop.org/gstreamer/cerbero/-/issues/363
https://gitlab.freedesktop.org/gstreamer/cerbero/-/issues/371
https://gitlab.freedesktop.org/gstreamer/cerbero/-/issues/362

A partial fix for the cerbero side of these was:

https://gitlab.freedesktop.org/gstreamer/cerbero/-/merge_requests/807

However, this relied on the consumers knowing that they need to add
`LC_RPATH` entries to the libdir of the prefix. This is done
automatically by build systems like Meson, but not by others, such as
Autotools, CMake, Cargo, XCode, etc. For those, we need to add the
RPATH entries to the gstreamer-1.0.pc file.

This also has the side-effect of fixing the loading of gstreamer rust
plugins on macOS:

Fixes https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/1159

Fixes https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/1149

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2218>

video-frame: avoid possible out of bound memory access

Although the components' initialization code would fill in -1 to all
unset components, make the code a bit more defensive and check for an
index bound first.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2231>

tests: dash_mpd: fix linker issues with non-optimizing compilers

undefined reference to `download_request_take_buffer'

Fixes https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2117#note_1344646

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2228>

gst_plugin_load_file: force plugin reload if diff filename

If a file includes a new version of a plugin that exits in the
registry, the output of gst-inspect is incorrect. The output has the
correct version but incorrect filename, and element description.

This seems to have also fixed some documentation issues.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1344>

docs: design: fix up some document titles

These show up in the index.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2222>

docs: design: add adaptive streaming design docs to sitemap

.. and some small additions to make it clearer what exist
and what's new.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2222>

d3dvideosink: Remove outdated comment

d3dvideosink is not a primary video sink element

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2223>

h264decoder,h265decoder: Do not hold codec_data buffer

... also do not need to extract it from caps.

Decoder uses codec_data only once per set_format() and
baseclass will extract codec_data buffer already.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2212>

d3d11decoder: Do not preallocate texture using downstream d3d11 buffer pool

Our decoder implementation does not use downstream d3d11 pool for
decoding because of special requirement of D3D11/DXVA. So preallocation
using the downstream buffer pool will waste GPU memory in most cases.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2211>

gstdevicemonitor: added cleanup of signal handlers and hidden providers list

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2182>

New HLS, DASH and MSS adaptive demuxer elements

This provides new HLS, DASH and MSS adaptive demuxer elements as a single plugin.

These elements offer many improvements over the legacy elements. They will only
work within a streams-aware context (`urisourcebin`, `uridecodebin3`,
`decodebin3`, `playbin3`, ...).

Stream selection and buffering is handled internally, this allows them to
directly manage the elementary streams and stream selection.

Authors:
* Edward Hervey <edward@centricular.com>
* Jan Schmidt <jan@centricular.com>
* Piotrek Brzeziński <piotr@centricular.com>
* Tim-Philipp Müller <tim@centricular.com>

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2117>

v4l2videodec: copy colorimetry values to output_state caps

This is to avoid transcoding negotiation fail between v4l2h265dec
and v4l2h264enc caused by colorimetry mismatch.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2192>

h264parse: Include coded-picture-structure info in caps

This reverts commit 652773de366a98e155332bf8ffb83ee5e6bea9e5 and
modifies it to rename the caps field name to coded-picture-structure.

It was previously removed because it confuses the decoder and we didn't
have a valid use case for including it in the encoded caps at this
stage. We now do have such a use case but still don't want to confuse
the decoder, so the field is renamed.

However, it is still not accurate without looking at the SEI picture
structure of each frame, so it was named coded-picture-structure. If its
value is "frame" it is most likely progressive, if it's "field" it is
most likely interlaced or mixed.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2177>

libav: fix frame leak on negotiation error

The function owns a reference on the frame. Drop it if negotiation
failed as we are already doing for the other error cases.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2196>

decodebin3: fix collection leak

get_merged_collection() returns an owned stream collection and was
leaked in the else block.

Fix leak when running:
GST_TRACERS=leaks GST_DEBUG="GST_TRACER:7,leaks:6" gst-play-1.0 --use-playbin3 test.mkv

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/954>

va: h264enc: Fix the forgotten unlock() when getting device path property.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2215>

qsvdecoder: Use system memory for non-d3d11 downstream

QSV's memory download implementation seems to be more faster
than our implementation

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2206>

qsv: Add H.265 decoder

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2206>

qsv: Include single gstva.h

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2206>

qsvh264dec: Don't register element if it's not supported by device

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2206>

qsvh264dec: Add support for packetized format

Handle avc/avc3 packetized formats

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2206>

qsv: Move debug init into each source file

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2206>

qsvdecoder: Reset next_task_index per init_session()

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2206>

d3d11decoder: Copy HDR10 related caps field manually

If negotiate() is called from the set_format() chain, sinkpad may not
hold caps yet, so baseclass cannot copy it over to srcpad caps.
Copy them manually.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2203>

qsvencoder: Rename property name i-frames to idr-interval

... and clarify the meaning of the value for each h264 and h265
encoder since the usage of mfxInfoMFX::IdrInterval is different
per codec.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2204>

qsvh265enc: Write HDR10 metadata SEI

If device supports HDR10 metadata API, write the information
into bitstream per IDR.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2204>

gst_plugins_cache.json: Update va plugins.

* Update conditionally-available attribute in vah264enc properties.
* Update GstVaFeature usage.
* Update GstVaEncoderRatecontrol usage.
* Update vapostproc classification.
* Add `add-borders` property in vapostproc.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2169>

vah264enc: Use GstVaFeature enum for enabling MBBRC.

GstVaFeature is a common enumeration for auto/disabled/enabled kind of
property setting.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2169>

vah264enc: Move rate-control enum to encoder class helper.

Since it's a common enumeration used, as user setting property, for
most of codecs.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2169>

vah264enc: Add device-path property.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2169>

gstleaks: fix pthread_atfork return value check

pthread_atfork() returns 0 on success.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2195>

gst-python: fix build on systems without C++ compiler

Fix the following build failure on systems without C++ compiler:

The following exception(s) were encountered:
Running "/home/autobuild/autobuild/instance-0/output-1/host/bin/i686-buildroot-linux-gnu-g++ --version" gave "[Errno 2] No such file or directory: '/home/autobuild/autobuild/instance-0/output-1/host/bin/i686-buildroot-linux-gnu-g++'"

Fixes:
 - http://autobuild.buildroot.org/results/eebf65036f79d21d347714d62afecd0108393308

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2200>

cudautils: fix critical typo in gst_cuda_buffer_fallback_copy

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2194>

playbin3: fix missing lock when unknown stream type in pad-removed cb

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2193>

decodebin3: Don't duplicate stream selections

Make sure that the requested stream selection isn't identical to the current
one. If that's the case, just carry on as usual.

This avoids multiple `streams-selected` posting ... when the selection didn't
change.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2185>

x264enc: Don't try to fixate ANY allowed caps

Instead fall back to the template caps.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2197>

appsrc: fix annotations

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2188>

rtpbasepayload: Don't write header extensions if there's no corresponding input buffer for the packet

The GstRTPHeaderExtension API requires the input buffer to exist.

This can happen if the output packet is generated e.g. from a caps or
tags event like in the case for rtpgstpay.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2198>

tests: rename 'icles' subdir to be more descriptive

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2178>

qtdemux: fix leak of channel_mapping

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2179>

tsdemux: Fix AC-4 detection

This regression was introduced by
https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1102
and has been present since 1.18

* Stream Type 0x06 is defined in the base mpeg-ts specification as Private PES
Packets. Determining the content should be solely based on descriptors found
within the PMT.
* This was abused in that commit by defining a "bluray-only" stream type for AC4
: `ST_BD_AUDIO_AC4`
* This should be entirely handled in the regular private pes handling further
down in the code

Fixes #1154

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2175>

docs: Update for Windows specific parts

* glimagesink is not a recommended one on Windows
* Remove directdrawsink section
* d3dvideosink is legacy and should not be recommended
* Add d3d11videosink part
* directsoundsink should be deprecated
* Add wasapisink/wasapi2sink part

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2144>

ptpclock: Fix wrong condition order from last commit

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2171>

gst-rtsp-server: minor spelling fixes

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2170>

va: h264enc: Correct the hierarchical level name for pyramid-b frames.

The current way names the level by the number of B frames it contains, the
less it contains, the higher level it is. So the non ref B frames are in the
lowest layer and the B frames in the highest level refer to I/P frames.
But the widely used way is just the opposite, the ref B frames are in the
lower level and non ref B frames are at the highest level.
The is just a terminology change, and does not have any effect for compression
result and quality.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2149>

doc: Update cache after NV12_8L128 and NV12_10BE_8L128 addition

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2158>

v4l2: Add NV12_8L128 in gst_v4l2_object_get_caps_info

It should be included in
<https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1379>

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2158>

v4l2: Add a missed break

Fix a typo that miss a break in the switch statement

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2158>

codecs: av1parser: Fix a typo in seq_level_idx check.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2157>

meson: gst-play: Restore Windows high-resolution timer support

Fix regression of the commit 2952a73f4083487f33ae83407bef5245d2f8fef2

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2154>

ptpclock: Allow at least 100ms delay between Sync/Follow_Up and Delay_Req/Delay_Resp messages

It doesn't matter for measurement purposes whether receiving them takes
a while and various PTP servers are not prioritizing to send them,
causing them to be dropped unnecessarily and preventing proper
synchronization with such servers.

This is especially a problem if the RTTs in the network are very low
compared to the additional delay imposed by the server.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2161>

amfh265enc: Handle preset option

Add missing preset option handling

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2165>

amfencoder: Do shared resource copy only if texture belongs to other device

Staging texture from the same d3d11device can be copied without
shared resource handling

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2165>

win32: Enable high-resolution timer for MinGW build

timeapi.h is missing in our MinGW toolchain. Include mmsystem.h
header instead, which defines struct and APIs in case of our MinGW
toolchain. Note that in case of native Windows10 SDK (MSVC build),
mmsystem.h will include timeapi.h

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2153>

Fix `transfer` gobject-introspection annotation typos

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2160>

wpevideosrc: Give WebKit the keyboard, touch and pointer modifiers

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2156>

wpesrc: Convert from utf32 to support other keys

This makes all of the non-letter keys work.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2156>

wpesrc: Initialize key event to 0

Otherwise, WebKit sees random modifiers

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2156>

amfcodec: fix setting quality presets

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2159>

mxfdemux: Fix issue with re-syncing

In case of re-syncing (i.e. moving to another partition to avoid too much of an
interleave), there was previously no checks to figure out whether a given
partition was already fully handled (i.e. when coming across it again after a
previous resync).

In order to handle this at least for single-track partitions, check whether we
have reached the essence track duration, and if so skip the partition.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2150>

mxfdemux: Don't double-increase track position

The essence track position should only be overriden if we sucesfully switched to
another position. In case of EOS we do not want to override it else we would
increase the track position *again* at the end of this function

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2150>

amfcodec: Fix for MinGW build

timeapi.h header might not be missing depending on toolchain.
Also do hard meson error if winmm dep is not available but
amfcodec is explicitly enabled.
And fixing various GCC build warning errors.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2155>

gstreamer-sharp: fix typo in script name

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2152>

rtpbin: Fix division by zero when using ts-offset-smoothing-factor

avg_ts_offset may cause division by zero when calculating potential
overflow protection. This fix will avoid the division.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2151>

qsv: Add JPEG encoder

Note that YUY2 is not supported yet, since the format support is not
implemented now.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2142>

subparse: don't try to index string with -1

If the len of the string turns out to be 0, str[len - 1] resolved to
str[-1] which is not a good idea.

Fixes: https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=46543
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2147>

Update openh264 wrap to v2.2.0 + fixes from master

Commit 0819f288dc5fc24fb34089113bc230aea65c8375 to be precise.

We need post-v2.2.0 build fixes from master, otherwise linking
fails because of missing symbols.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2145>

amfcodec: Update plugin cache

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2143>

nvencoder: Update property names and default values

Update properties of newly written D3D11/CUDA mode encoders
to be consistent with Intel QSV plugin. And rename "zerolatency"
to "zero-reorder-delay" because previous "zerolatency" may
misleading

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2140>

qsvencoder: Update property names and default values

Stop using MSDK plugins property naming, instead use unified names
and default values to be consistent with newly written NVIDIA encoders.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2140>

amfcodec: Add support for h264/h265 encoding

New encoder implementations for AMD GPU using AMF API

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2109>

amfcodec: Import AMF SDK headers

SDK version v1.4.24 at the commit of
https://github.com/GPUOpen-LibrariesAndSDKs/AMF/commit/fbf12cd39fe1812ed902525a1c001307b94871b9

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2109>

msdk: Fix Windows build

Headers of gstva should not be included on Windows

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2141>

rtpopusdepay: assume 2 channels if sprop-stereo is missing

Fixes #1064

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2125>

d3d11window: Use ANSI version WIN32 API explicitly

We were using ANSI version APIs implicitly because UNICODE is not
defined by ourselves. But potentially it can be broken if user
defines UNICODE.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2131>

d3d11: Run indent

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2131>

ogg: fix possible buffer overrun

If an ogg stream does not match our expectations of how the end of a
buffer may be structured, it was possible to read memory past the end of
the buffer parsed by libogg.  Include a bounds check for this case and
stop parsing.

Fixes https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=3930

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2134>