drm/edid: check basic audio support on CEA extension block

Tag code stored in bit7:5 for CTA block byte[3] is not the same as
CEA extension block definition. Only check CEA block has
basic audio support.

v3: update commit message.

Cc: stable@vger.kernel.org
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Shawn C Lee <shawn.c.lee@intel.com>
Cc: intel-gfx <intel-gfx@lists.freedesktop.org>
Signed-off-by: Cooper Chiou <cooper.chiou@intel.com>
Signed-off-by: Lee Shawn C <shawn.c.lee@intel.com>
Fixes: e28ad544f462 ("drm/edid: parse CEA blocks embedded in DisplayID")
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220324061218.32739-1-shawn.c.lee@intel.com

drm/selftest: plane_helper: Put test structures in static storage

Clang warns on certain 32-bit architectures:

  drivers/gpu/drm/selftests/test-drm_plane_helper.c:76:5: warning: stack frame size (1064) exceeds limit (1024) in 'igt_check_plane_state' [-Wframe-larger-than]
  int igt_check_plane_state(void *ignored)
      ^
  1 warning generated.

The structures in igt_check_plane_state() total 1008 bytes, so any small
amount of inlining will cause the stack frame to exceed the 32-bit limit
of 1024, triggering the warning.

Move these structures to static storage, which dramatically reduces the
amount of stack space in igt_check_plane_state(). There is no testing
impact, as igt_check_plane_state() is only called once in the driver.

Fixes: 943e6a8beeac ("mock a drm_plane in igt_check_plane_state to make the test more robust")
Link: https://github.com/ClangBuiltLinux/linux/issues/1600
Reported-by: kernel test robot <lkp@intel.com>
Suggested-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220302235909.784935-1-nathan@kernel.org

drm/ttm: Fix a kernel oops due to an invalid read

The res is initialized here only if there's no errors so passing it to
ttm_resource_fini in the error paths results in a kernel oops. In the
error paths, instead of the unitialized res, we have to use to use
node->base on which ttm_resource_init was called.

Sample affected backtrace:
Unable to handle kernel NULL pointer dereference at virtual address 00000000000000d8
 Mem abort info:
   ESR = 0x96000004
   EC = 0x25: DABT (current EL), IL = 32 bits
   SET = 0, FnV = 0
   EA = 0, S1PTW = 0
   FSC = 0x04: level 0 translation fault
 Data abort info:
   ISV = 0, ISS = 0x00000004
   CM = 0, WnR = 0
 user pgtable: 4k pages, 48-bit VAs, pgdp=0000000106ac0000
 [00000000000000d8] pgd=0000000000000000, p4d=0000000000000000
 Internal error: Oops: 96000004 [#1] SMP
 Modules linked in: bnep vsock_loopback vmw_vsock_virtio_transport_common
 vsock snd_hda_codec_generic snd_hda_intel snd_intel_dspcfg snd_hda_codec
 snd_hwdep >
 CPU: 0 PID: 1197 Comm: gnome-shell Tainted: G    U  5.17.0-rc2-vmwgfx #2
 Hardware name: VMware, Inc. VBSA/VBSA, BIOS VEFI 12/31/2020
 pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
 pc : ttm_resource_fini+0x5c/0xac [ttm]
 lr : ttm_range_man_alloc+0x128/0x1e0 [ttm]
 sp : ffff80000d783510
 x29: ffff80000d783510 x28: 0000000000000000 x27: ffff000086514400
 x26: 0000000000000300 x25: ffff0000809f9e78 x24: 0000000000000000
 x23: ffff80000d783680 x22: ffff000086514400 x21: 00000000ffffffe4
 x20: ffff80000d7836a0 x19: ffff0000809f9e00 x18: 0000000000000000
 x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000
 x14: 0000000000000000 x13: 0000000000000800 x12: ffff0000f2600a00
 x11: 000000000000fc96 x10: 0000000000000000 x9 : ffff800001295c18
 x8 : 0000000000000000 x7 : 0000000000000300 x6 : 0000000000000000
 x5 : 0000000000000000 x4 : ffff0000f1034e20 x3 : ffff0000f1034600
 x2 : 0000000000000000 x1 : 0000000000000000 x0 : 0000000000600000
 Call trace:
  ttm_resource_fini+0x5c/0xac [ttm]
  ttm_range_man_alloc+0x128/0x1e0 [ttm]
  ttm_resource_alloc+0x58/0x90 [ttm]
  ttm_bo_mem_space+0xc8/0x3e4 [ttm]
  ttm_bo_validate+0xb4/0x134 [ttm]
  vmw_bo_pin_in_start_of_vram+0xbc/0x200 [vmwgfx]
  vmw_framebuffer_pin+0xc0/0x154 [vmwgfx]
  vmw_ldu_primary_plane_atomic_update+0x8c/0x6e0 [vmwgfx]
  drm_atomic_helper_commit_planes+0x11c/0x2e0
  drm_atomic_helper_commit_tail+0x60/0xb0
  commit_tail+0x1b0/0x210
  drm_atomic_helper_commit+0x168/0x400
  drm_atomic_commit+0x64/0x74
  drm_atomic_helper_set_config+0xdc/0x11c
  drm_mode_setcrtc+0x1c4/0x780
  drm_ioctl_kernel+0xd0/0x1a0
  drm_ioctl+0x2c4/0x690
  vmw_generic_ioctl+0xe0/0x174 [vmwgfx]
  vmw_unlocked_ioctl+0x24/0x30 [vmwgfx]
  __arm64_sys_ioctl+0xb4/0x100
  invoke_syscall+0x78/0x100
  el0_svc_common.constprop.0+0x54/0x184
  do_el0_svc+0x34/0x9c
  el0_svc+0x48/0x1b0
  el0t_64_sync_handler+0xa4/0x130
  el0t_64_sync+0x1a4/0x1a8
 Code: 35000260 f9401a81 52800002 f9403a60 (f9406c23)
 ---[ end trace 0000000000000000 ]---

Signed-off-by: Zack Rusin <zackr@vmware.com>
Fixes: de3688e469b0 ("drm/ttm: add ttm_resource_fini v2")
Cc: Christian König <christian.koenig@amd.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220318174332.440068-6-zack@kde.org

Merge tag 'drm-intel-next-fixes-2022-03-10' of git://anongit.freedesktop.org/drm/drm-intel into drm-next

- Reduce overzealous alignment constraints for GGTT
- Add missing mdev attribute "name" for GVT
- Async flip fixes (Ville)
- Static checker fix (Ville)

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YimvoLOZ8RPKrITv@jlahtine-mobl.ger.corp.intel.com

Merge tag 'amd-drm-next-5.18-2022-03-09' of https://gitlab.freedesktop.org/agd5f/linux into drm-next

amd-drm-next-5.18-2022-03-09:

amdgpu:
- Misc code cleanups
- Misc display fixes
- PSR display fixes
- More RAS cleanup
- Hotplug fix
- Bump minor version for hotplug tests
- SR-IOV fixes
- GC 10.3.7 updates
- Remove some firmwares which are no longer used
- Mode2 reset refactor
- Aldebaran fixes
- Add VCN fwlog feature for VCN debugging
- CS code cleanup
- Fix clang warning
- Fix CS clean up rebase breakage

amdkfd:
- SVM fixes
- SMI event fixes and cleanups
- vmid_pasid mapping fix for gfx10.3

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220309224439.2178877-1-alexander.deucher@amd.com

Merge tag 'drm-msm-next-2022-03-08' of https://gitlab.freedesktop.org/drm/msm into drm-next

Follow-up pull req for v5.18 to pull in some important fixes.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGvwHFHEd+9df-0aBOCfmw+ULvTS3f18sJuq_cvGKLDSjw@mail.gmail.com

drm/amdgpu: fix a wrong ib reference

It should be p->job->ibs[j] instead of p->job->ibs[i] here.

Fixes: cdc7893fc93f19 ("drm/amdgpu: use job and ib structures directly in CS parsers")
Signed-off-by: Lang Yu <Lang.Yu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: bail out early if no get_atc_vmid_pasid_mapping_info

it makes no sense to continue with an undefined vmid.

Fixes: c8b0507f40deea ("drm/amdkfd: judge get_atc_vmid_pasid_mapping_info before call")
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reported-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Merge tag 'exynos-drm-next-v5.18' of git://git./linux/kernel/git/daeinki/drm-exynos into drm-next

New feature
- Add BGR pixel format support for FIMD device. As for this,
  this patch uses undocumented register, WIN_RGB_ORDER, but
  it is safe because product kernels have been using same
  register.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Inki Dae <inki.dae@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220304085220.324245-1-inki.dae@samsung.com

drm/i915/gtt: reduce overzealous alignment constraints for GGTT

Currently this will enforce both 2M alignment and padding for any LMEM
pages inserted into the GGTT. However, this was only meant to be applied
to the compact-pt layout with the ppGTT. For the GGTT we can reduce the
alignment and padding to 64K.

Bspec: 45015
Fixes: 87bd701ee268 ("drm/i915: enforce min GTT alignment for discrete cards")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Robert Beckett <bob.beckett@collabora.com>
Cc: Ramalingam C <ramalingam.c@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220303100229.839282-1-matthew.auld@intel.com
(cherry picked from commit c64fa77dd4609cb8cd53fbb73b02434ae8212c7a)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/msm/gpu: Fix crash on devices without devfreq support (v2)

Avoid going down devfreq paths on devices where devfreq is not
initialized.

v2: Change has_devfreq() logic [Dmitry]

Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Reported-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Fixes: 6aa89ae1fb04 ("drm/msm/gpu: Cancel idle/boost work on suspend")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220308184844.1121029-1-robdclark@gmail.com

drm/msm/adreno: fix cast in adreno_get_param()

These casts need to happen before the shift.  The only time it would
matter would be if "rev.core" is >= 128.  In that case the sign bit
would be extended and we do not want that.

Fixes: afab9d91d872 ("drm/msm/adreno: Expose speedbin to userspace")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Link: https://lore.kernel.org/r/20220307133105.GA17534@kili
Signed-off-by: Rob Clark <robdclark@chromium.org>

Merge tag 'gvt-next-2022-03-07' of https://github.com/intel/gvt-linux into drm-intel-next-fixes

- add the missing attribute "name" in VFIO mdev hierarchy.

Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
From: "Wang, Zhi A" <zhi.a.wang@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/e38f0725-6b22-8e49-b8f6-41986b0ece06@intel.com

drm/i915: Fix the async flip wm0/ddb optimization

The current implementation of the async flip wm0/ddb optimization
does not work at all. The biggest problem is that we skip the
whole intel_pipe_update_{start,end}() dance and thus never actually
complete the commit that is trying to do the wm/ddb change.

To fix this we need to move the do_async_flip flag to the crtc
state since we handle commits per-pipe, not per-plane.

Also since all planes can now be included in the first/last
"async flip" (which gets converted to a sync flip to do the
wm/ddb mangling) we need to be more careful when checking if
the plane state is async flip comptatible. Only planes doing
the async flip should be checked and other planes are perfectly
fine not adhereing to any async flip related limitations.

However for subsequent commits which are actually going do the
async flip in hardware we want to make sure no other planes
are in the state. That should never happen assuming we did our
job correctly, so we'll toss in a WARN to make sure we catch
any bugs here.

Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Fixes: c3639f3be480 ("drm/i915: Use wm0 only during async flips for DG2")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220214105532.13049-4-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
(cherry picked from commit 2e08437160d1e8f2cd3f0d56d59e74423602116e)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/i915: Check async flip capability early on

Since the async flip state check is done very late and
thus it can see potentially all the planes in the state
(due to the wm/ddb optimization) we need to move the
"can the requested plane do async flips at all?" check
much earlier. For this purpose we introduce
intel_async_flip_check_uapi() that gets called early during
the atomic check.

And for good measure we'll throw in a couple of basic checks:
- is the crtc active?
- was a modeset flagged?
- is+was the plane enabled?
Though atm all of those should be guaranteed by the fact
that the async flip can only be requested through the legacy
page flip ioctl.

Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Fixes: c3639f3be480 ("drm/i915: Use wm0 only during async flips for DG2")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220214105532.13049-3-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
(cherry picked from commit b0b2bed2a1305c8f977c6b7d5fa162773693a212)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/i915: Don't skip ddb allocation if data_rate==0

data_rate==0 no longer means a plane is disabled, it could
also mean we want to use the minimum ddb allocation for it.
Hence we can't bail out early during ddb allocation or
else we'll simply forget to allocate any ddb for such planes.

Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Fixes: 6a4d8cc6bbbf ("drm/i915: Don't allocate extra ddb during async flip for DG2")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220214105532.13049-2-ville.syrjala@linux.intel.com
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
(cherry picked from commit 6475e106821babc0dc478a9cb3fc3973739c43fb)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/i915: Avoid negative shift due to bigjoiner_pipes==0

bigjoiner_pipes==0 leads bigjoiner_master_pipe() to
do BIT(ffs(0)-1) which is undefined behaviour. The code should
actually still work fine since the only place we provoke
that is intel_crtc_bigjoiner_slave_pipes() and it'll bitwise
AND the result with 0, so doesn't really matter what we get
out of bigjoiner_master_pipe(). But best not provoke undefined
behaviour anyway.

Reported-by: kernel test robot <oliver.sang@intel.com>
Fixes: a6e7a006f5d5 ("drm/i915: Change bigjoiner state tracking to use the pipe bitmask")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220223131315.18016-2-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
(cherry picked from commit cccc71b552a1040ad3d738d7ec95570801fb0bf6)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/amdkfd: Add format attribute to kfd_smi_event_add

To enable compiler type-checked against the format string in callers.

All warnings (new ones prefixed by >>):

>> warning: function 'kfd_smi_event_add' might be a candidate for
'gnu_printf' format attribute [-Wsuggest-attribute=format]

Fixes: d58b8a99cbb8 ("drm/amdkfd: Add SMI add event helper")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/i915/gvt: add the missing mdev attribute "name"

The mdev attribute "name" is required by some middle software, e.g.
KubeVirt, an open source SW that manages VM on Kubernetes cluster uses
the mdev sysfs directory/file structure to discover mediated device in
nodes in the cluster.

v2:

- Fix the missing defination in gvt_type_attrs. (Zhenyu)

Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: Hui Chun Ong <hui.chun.ong@intel.com>
Cc: Terrence Xu <terrence.xu@intel.com>
Cc: Zhi Wang <zhi.a.wang@intel.com>
Signed-off-by: Zhi Wang <zhi.wang.linux@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20220222150532.9090-1-zhi.a.wang@intel.com
Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com>

drm/msm: Fix dirtyfb refcounting

refcount_t complains about 0->1 transitions, which isn't *quite* what we
wanted.  So use dirtyfb==1 to mean that the fb is not connected to any
output that requires dirtyfb flushing, so that we can keep the underflow
and overflow checking.

Fixes: 9e4dde28e9cd ("drm/msm: Avoid dirtyfb stalls on video mode displays (v2)")
Signed-off-by: Rob Clark <robdclark@chromium.org>
Link: https://lore.kernel.org/r/20220304202146.845566-1-robdclark@gmail.com

drm/msm/a6xx: Fix missing ARRAY_SIZE() check

Fixes: f6d62d091cfd ("drm/msm/a6xx: add support for Adreno 660 GPU")
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220305173405.914989-1-robdclark@gmail.com

drm/msm: Add MSM_SUBMIT_FENCE_SN_IN

Add a way for userspace to specify the sequence number fence used to
track completion of the submit.  As the seqno fence is simply an
incrementing counter which is local to the submitqueue, it is easy for
userspace to know the next value.

This is useful for native userspace drivers in a vm guest, as the guest
to host roundtrip can have high latency.  Assigning the fence seqno in
the guest userspace allows the guest to continue without waiting for
response from the host.

Signed-off-by: Rob Clark <robdclark@chromium.org>
Link: https://lore.kernel.org/r/20220224222321.60653-1-robdclark@gmail.com

drm/msm/a6xx: Zap counters across context switch

Any app controlled perfcntr collection (GL_AMD_performance_monitor, etc)
does not require counters to maintain state across context switches.  So
clear them if systemwide profiling is not active.

Signed-off-by: Rob Clark <robdclark@chromium.org>
Link: https://lore.kernel.org/r/20220304005317.776110-5-robdclark@gmail.com

drm/msm: Add SYSPROF param (v2)

Add a SYSPROF param for system profiling tools like Mesa's pps-producer
(perfetto) to control behavior related to system-wide performance
counter collection.  In particular, for profiling, one wants to ensure
that GPU context switches do not effect perfcounter state, and might
want to suppress suspend (which would cause counters to lose state).

v2: Swap the order in msm_file_private_set_sysprof() [sboyd] and
    initialize the sysprof_active refcount to one (because the under/
    overflow checking in refcount_t doesn't expect a 0->1 transition)
    meaning that values greater than 1 means sysprof is active.

Signed-off-by: Rob Clark <robdclark@chromium.org>
Link: https://lore.kernel.org/r/20220304005317.776110-4-robdclark@gmail.com

drm/msm: Add SET_PARAM ioctl

It was always expected to have a use for this some day, so we left a
placeholder.  Now we do.  (And I expect another use in the not too
distant future when we start allowing userspace to allocate GPU iova.)

Signed-off-by: Rob Clark <robdclark@chromium.org>
Link: https://lore.kernel.org/r/20220304005317.776110-3-robdclark@gmail.com

drm/msm: Update generated headers

Update headers from mesa commit:

  commit 7e63fa2bb13cf14b765ad06d046789ee1879b5ef
  Author:     Rob Clark <robclark@freedesktop.org>
  AuthorDate: Wed Mar 2 17:11:10 2022 -0800

      freedreno/registers: Add a couple regs we need for kernel

Signed-off-by: Rob Clark <robdclark@chromium.org>
      Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/15221>

Signed-off-by: Rob Clark <robdclark@chromium.org>
[for display bits:]
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Link: https://lore.kernel.org/r/20220304005317.776110-2-robdclark@gmail.com

drm/amdgpu: initialize the vmid_wait with the stub fence

This way we don't need to check for NULL any more.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: properly embed the IBs into the job

We now have standard macros for that.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: use job and ib structures directly in CS parsers

Instead of providing the ib index provide the job and ib pointers directly to
the patch and parse functions for UVD and VCE.

Also move the set/get functions for IB values to the IB declerations.

Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: header cleanup

No function change, just move a bunch of definitions from amdgpu.h into
separate header files.

Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/amdgpu: set disabled vcn to no_schduler

[Why]
after the reset domain introduced, the sched.ready will be init after
hw_init, which will overwrite the setup in vcn hw_init, and lead to
vcn ib test fail.

[How]
set disabled vcn to no_scheduler

Fixes: 5fd8518d187ed0 ("drm/amdgpu: Move scheduler init to after XGMI is ready")
Signed-off-by: Jingwen Chen <Jingwen.Chen2@amd.com>
Acked-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: install ctx entities with cmpxchg

Since we removed the context lock we need to make sure that not two threads
are trying to install an entity at the same time.

Signed-off-by: Christian König <christian.koenig@amd.com>
Fixes: 461fa7b0ac565e ("drm/amdgpu: remove ctx->lock")
Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: implement get_atc_vmid_pasid_mapping_info for gfx10.3

This patch implements get_atc_vmid_pasid_mapping_info for gfx10.3

Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: judge get_atc_vmid_pasid_mapping_info before call

Fix the NULL point issue:

[ 3076.255609] BUG: kernel NULL pointer dereference, address: 0000000000000000
[ 3076.255624] #PF: supervisor instruction fetch in kernel mode
[ 3076.255637] #PF: error_code(0x0010) - not-present page
[ 3076.255649] PGD 0 P4D 0
[ 3076.255660] Oops: 0010 [#1] SMP NOPTI
[ 3076.255669] CPU: 20 PID: 2415 Comm: kfdtest Tainted: G        W  OE     5.11.0-41-generic #45~20.04.1-Ubuntu
[ 3076.255691] Hardware name: AMD Splinter/Splinter-RPL, BIOS VS2326337N.FD 02/07/2022
[ 3076.255706] RIP: 0010:0x0
[ 3076.255718] Code: Unable to access opcode bytes at RIP 0xffffffffffffffd6.
[ 3076.255732] RSP: 0018:ffffb64283e3fc10 EFLAGS: 00010297
[ 3076.255744] RAX: 0000000000000000 RBX: 0000000000000008 RCX: 0000000000000027
[ 3076.255759] RDX: ffffb64283e3fc1e RSI: 0000000000000008 RDI: ffff8c7a87f60000
[ 3076.255776] RBP: ffffb64283e3fc78 R08: ffff8c7d88518ac0 R09: ffffb64283e3fa60
[ 3076.255791] R10: 0000000000000001 R11: 0000000000000001 R12: 000000000000000f
[ 3076.255805] R13: ffff8c7bdcea5800 R14: ffff8c7a9f3f3000 R15: ffff8c7a8696bc00
[ 3076.255820] FS:  0000000000000000(0000) GS:ffff8c7d88500000(0000) knlGS:0000000000000000
[ 3076.255839] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 3076.255851] CR2: ffffffffffffffd6 CR3: 0000000109e3c000 CR4: 0000000000750ee0
[ 3076.255866] PKRU: 55555554
[ 3076.255873] Call Trace:
[ 3076.255884]  dbgdev_wave_reset_wavefronts+0x72/0x160 [amdgpu]
[ 3076.256025]  process_termination_cpsch.cold+0x26/0x2f [amdgpu]
[ 3076.256182]  ? ktime_get_mono_fast_ns+0x4e/0xa0
[ 3076.256196]  kfd_process_dequeue_from_all_devices+0x49/0x70 [amdgpu]
[ 3076.256328]  kfd_process_notifier_release+0x187/0x2b0 [amdgpu]
[ 3076.256451]  ? mn_itree_inv_end+0xdc/0x110
[ 3076.256463]  __mmu_notifier_release+0x74/0x1f0
[ 3076.256474]  exit_mmap+0x170/0x200
[ 3076.256484]  ? __handle_mm_fault+0x677/0x920
[ 3076.256496]  ? _cond_resched+0x19/0x30
[ 3076.256507]  mmput+0x5d/0x130
[ 3076.256518]  do_exit+0x332/0xaf0
[ 3076.256526]  ? handle_mm_fault+0xd7/0x2b0
[ 3076.256537]  do_group_exit+0x43/0xa0
[ 3076.256548]  __x64_sys_exit_group+0x18/0x20
[ 3076.256559]  do_syscall_64+0x38/0x90
[ 3076.256569]  entry_SYSCALL_64_after_hwframe+0x44/0xa9

Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/vcn: Add vcn firmware log

vcn fwlog is for debugging purpose only,
by default, it is disabled.

Signed-off-by: Ruijing Dong <ruijing.dong@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/vcn: Update fw shared data structure

Add fw log in fw shared data structure.

Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Ruijing Dong <ruijing.dong@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Add DFC CAP support for aldebaran

Add DFC CAP support for aldebaran

Initialize cap microcode in psp_init_sriov_microcode,
the ta microcode will be  initialized in psp_vxx_init_microcode

Signed-off-by: David Yu <David.Yu@amd.com>
Reviewed-by: Shaoyun.liu <Shaoyun.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Set correct DMA mask for aldebaran

Aldebaran has 48-bit physical address support

Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Refactor mode2 reset logic for v13.0.2

Use IP version and refactor reset logic to apply to a list of devices.

Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Le Ma <Le.Ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: 3.2.175

drm/amd/display: 3.2.175

    This version brings along following fixes:
    - Remove invalid RDPCS Programming in DAL
    - Make functional resource functions non-static
    - Reset VIC if HDMI_VIC is present
    - Add frame alternate 3D & restrict HW packed on dongles
    - Reg to turn on/off PSR Power seq in FSM
    - Modify plane removal sequence to avoid hangs
    - Pass HostVM enable flag into DCN3.1 DML
    - DC Validation failures
    - Program OPP before ODM
    - Refactor fixed VS w/a for PHY tests
    - Pass deep sleep disabled allow info to dmub fw
    - Refine the EDID override
    - [FW Promotion] Release 0.0.106.0
    - Add verify_link_cap back for hdmi

Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: add verify_link_cap back for hdmi

[why]
hdmi specific: add verify link cap after retrive link cap.

Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: [FW Promotion] Release 0.0.106.0

Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Anthony Koo <Anthony.Koo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: refine the EDID override

[Why]
We already get the SBIOS EDID via ACPI on KMD,
but after that, we just use the monitor EDID to set it HDR caps

[How]
Make the SBIOS EDID override to read_edid()
That can change the read EDID caps from the right EDID

Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: jinzh <jinzh@github.amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Pass deep sleep disabled allow info to dmub fw

[Why]
The deep sleep mode need to be disabled in some PSR scenario.

Reviewed-by: Anthony Koo <Anthony.Koo@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Robin Chen <robin.chen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Refactor fixed VS w/a for PHY tests

[Why/How]
Refactor original w/a to unify naming and
simplify logic. This also re-enables the code
that was previously skipped due to the
disabling of the previous workaround logic.

Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Reviewed-by: Nevenko Stupar <Nevenko.Stupar@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: George Shen <George.Shen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Program OPP before ODM

[WHY]
HW expects OPP to be configured before ODM is enabled.
Failure to do so can cause errors.

Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Pass HostVM enable flag into DCN3.1 DML

[WHY]
Calculations differ with HostVM enabled/disabled, causing underflow in
configs with high refresh displays + scaling due to lower available BW

[HOW]
Check riommu_active in order to pass correct HostVM enablement to DML

Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/exynos: fimd: add BGR support for exynos4/5

In the downstream kernels for exynos4 and exynos5 devices, there is an
undocumented register that controls the order of the RGB output. It can
be set to either normal order or reversed, which enables BGR support for
those SoCs.

This patch enables the BGR support for all the SoCs that were found to
have at least one device with this logic in the corresponding downstream
kernels.

Signed-off-by: Martin Jücker <martin.juecker@gmail.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

drm/exynos: Search for TE-gpio in DSI panel's node

TE-gpio, if defined, is placed in the panel's node, not the parent DSI
node. Change the devm_gpiod_get_optional() to gpiod_get_optional() and
pass proper device node to it. The code already has a proper cleanup
path, so it looks that the devm_* variant has been applied accidentally
during the conversion to gpiod API.

Fixes: ee6c8b5afa62 ("drm/exynos: Replace legacy gpio interface for gpiod interface")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Fixed a typo.
Signed-off-by: Inki Dae <inki.dae@samsung.com>

drm/exynos: Don't fail if no TE-gpio is defined for DSI driver

TE-gpio is optional and if it is not found then gpiod_get_optional()
returns NULL. In such case the code will continue and try to convert NULL
gpiod to irq what in turn fails. The failure is then propagated and driver
is not registered.

Fix this by returning early from exynos_dsi_register_te_irq() if no
TE-gpio is found.

Fixes: ee6c8b5afa62 ("drm/exynos: Replace legacy gpio interface for gpiod interface")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

drm/exynos: gsc: Use platform_get_irq() to get the interrupt

platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static
allocation of IRQ resources in DT core code, this causes an issue
when using hierarchical interrupt domains using "interrupts" property
in the node as this bypassed the hierarchical setup and messed up the
irq chaining.

In preparation for removal of static setup of IRQ resource from DT core
code use platform_get_irq().

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

drm/exynos/fimc: Use platform_get_irq() to get the interrupt

platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static
allocation of IRQ resources in DT core code, this causes an issue
when using hierarchical interrupt domains using "interrupts" property
in the node as this bypassed the hierarchical setup and messed up the
irq chaining.

In preparation for removal of static setup of IRQ resource from DT core
code use platform_get_irq().

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

drm/exynos/exynos_drm_fimd: Use platform_get_irq_byname() to get the interrupt

platform_get_resource_byname(pdev, IORESOURCE_IRQ, ..) relies on static
allocation of IRQ resources in DT core code, this causes an issue
when using hierarchical interrupt domains using "interrupts" property
in the node as this bypassed the hierarchical setup and messed up the
irq chaining.

In preparation for removal of static setup of IRQ resource from DT core
code use platform_get_irq_byname().

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

drm/exynos: mixer: Use platform_get_irq() to get the interrupt

platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static
allocation of IRQ resources in DT core code, this causes an issue
when using hierarchical interrupt domains using "interrupts" property
in the node as this bypassed the hierarchical setup and messed up the
irq chaining.

In preparation for removal of static setup of IRQ resource from DT core
code use platform_get_irq().

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

drm/exynos/exynos7_drm_decon: Use platform_get_irq_byname() to get the interrupt

platform_get_resource_byname(pdev, IORESOURCE_IRQ, ..) relies on static
allocation of IRQ resources in DT core code, this causes an issue
when using hierarchical interrupt domains using "interrupts" property
in the node as this bypassed the hierarchical setup and messed up the
irq chaining.

In preparation for removal of static setup of IRQ resource from DT core
code use platform_get_irq_byname().

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

Merge tag 'drm-msm-next-2022-03-01' of https://gitlab.freedesktop.org/drm/msm into drm-next

We're experimenting a bit with the process this time, with Dmitry
collecting display patches and merging them into msm-next with me
handling the gpu/etc side of things.  Summary of interesting new bits
and pieces

* dpu + dp support for sc8180x
* dp support for sm8350
* dpu + dsi support for qcm2290
* 10nm dsi phy tuning support
* bridge support for dp encoder
* gpu support for additional 7c3 SKUs
* assorted cleanups and fixes

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGu=Jdrw6DqYOYPTMks7=zatrsvdR=o6DpjqZ=TQQhFZuw@mail.gmail.com

Merge tag 'drm-intel-gt-next-2022-03-03' of git://anongit.freedesktop.org/drm/drm-intel into drm-next

Cross-subsystem Changes:

- drm-next backmerge for buddy allocator changes

Driver Changes:

- Skip i915_perf init for DG2 as it is not yet enabled (Ram)
- Add missing workarounds for DG2 (Clint)
- Add 64K page/align support for platforms like DG2 that require it (Matt A, Ram, Bob)
- Add accelerated migration support for DG2 (Matt A)
- Add flat CCS support for XeHP SDV (Abdiel, Ram)
- Add Compute Command Streamer (CCS) engine support for XeHP SDV (Michel,
  Daniele, Aravind, Matt R)
- Don't support parallel submission on compute / render (Matt B, Matt R)

- Disable i915 build on PREEMPT_RT until RT behaviour fixed (Sebastian)
- Remove RPS interrupt support for TGL+ (Jose)
- Fix S/R with PM_EARLY for non-GTT mappable objects on DG2 (Matt, Lucas)
- Skip stolen memory init if it is fully reserved (Jose)
- Use iosys_map for GuC data structures that may be in LMEM BAR or SMEM (Lucas)
- Do not complain about stale GuC reset notifications for banned contexts (John)

- Move context descriptor fields to intel_lrc.h
- Start adding support for small BAR (Matt A)
- Clarify vma lifetime (Thomas)
- Simplify subplatform detection on TGL (Jose)
- Correct the param count for unset GuC SLPC param (Vinay, Umesh)
- Read RP_STATE_CAP correctly on Gen12 with GuC SLPC (Vinay)
- Initialize GuC submission locks and queues early (Daniele)
- Fix GuC flag query helper function to not modify state (John)

- Drop fake lmem support now we have real hardware available (Lucas)
- Move misplaced W/A to their correct locations (Srinivasan)
- Use get_reset_domain() helper (Tejas)
- Move context descriptor fields to intel_lrc.h (Matt R)
- Selftest improvements (Matt A)

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YiBzY1dM7bKwMQ3H@jlahtine-mobl.ger.corp.intel.com

Merge tag 'drm-misc-next-2022-03-03' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

drm-misc-next for v5.18:

UAPI Changes:

Cross-subsystem Changes:
- Improve performance of some fbdev ops, in some cases up to 6x faster.

Core Changes:
- Some small DP fixes.
- Find panels in subnodes of OF devices, and add of_get_drm_panel_display_mode
  to retrieve mode.
- Add drm_object_property_get_default_value and use it for resetting
  zpos in plane state reset, removing the need for individual drivers
  to do it.
- Same for color encoding and color range props.
- Update panic handling todo doc.
- Add todo that format conversion helpers should be sped up similarly to fbdev ops.

Driver Changes:
- Add panel orientation property to simpledrm for quirked panels.
- Assorted small fixes to tiny/repaper, nouveau, stm, omap, ssd130x.
- Add crc support to stm/ltdc.
- Add MIPI DBI compatible SPI driver
- Assorted small fixes to tiny panels and bridge drivers.
- Add AST2600 support to aspeed.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/48fabd78-ade9-f80b-c724-13726c7be69e@linux.intel.com

Merge tag 'du-next-20220303' of git://linuxtv.org/pinchartl/media into drm-next

- R-Car LVDS support for M3-W+ (R8A77961) SoC
- R-Car DU misc fixes and cleanups

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YiCwy3FR3gPng4dN@pendragon.ideasonboard.com

Merge tag 'drm/tegra/for-5.18-rc1' of https://gitlab.freedesktop.org/drm/tegra into drm-next

drm/tegra: Changes for v5.18-rc1

This contains a couple more minor fixes that didn't seem urgent enough
for v5.17. On top of that this improves YUV format support on older
chips.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thierry Reding <thierry.reding@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220301124426.1207653-1-thierry.reding@gmail.com

drm: rcar-du: Don't restart group when enabling plane on Gen3

On Gen3 hardware enabling a VSP plane doesn't change any register that
requires DRES to take effect. Avoid a group restart in that case.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>

drm: rcar-du: Don't select VSP1 sink on Gen3

The VSP1 sink selection through register DEFR8 is only available on Gen2
hardware. Skip it on Gen3.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>

drm: rcar-du: Drop LVDS device tree backward compatibility

The rcar-du driver goes to great lengths to preserve device tree
backward compatibility for the LVDS encoders by patching old device
trees at runtime.

The last R-Car Gen2 platform was converted to the new bindings commit
edb0c3affe5214a2 ("ARM: dts: r8a7793: Convert to new LVDS DT bindings"),
in v4.17, and the last RZ/G1 platform converted in commit
6a6a797625b5fe85 ("ARM: dts: r8a7743: Convert to new LVDS DT bindings"),
in v5.0. Both are older than commit 58256143cff7c2e0 ("clk: renesas:
Remove R-Car Gen2 legacy DT clock support"), in v5.5, which removes
support for legacy bindings for clocks. The LVDS compatibility code is
thus not needed anymore. Drop it.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>

drm: rcar-du: lvds: Add r8a77961 support

The M3-W+ SoC has the same LVDS encoder as other R-Car Gen3 chips.
Add support for M3-W+ (R8A77961) SoC to the LVDS encoder driver.

Signed-off-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

dt-bindings: display: bridge: renesas,lvds: Document r8a77961 bindings

Document the R-Car M3-W+ (R8A77961) SoC in the R-Car LVDS encoder
bindings.

Signed-off-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

drm/ssd130x: remove redundant initialization of pointer mode

Pointer mode is being assigned a value that is never read, it is
being re-assigned later with a new value. The initialization is
redundant and can be removed.

Cleans up clang scan build warning:
drivers/gpu/drm/solomon/ssd130x.c:582:27: warning: Value stored
to 'mode' during its initialization is never read [deadcode.DeadStores]

Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220302175309.1098827-1-colin.i.king@gmail.com

dt-bindings: display/msm: add missing brace in dpu-qcm2290.yaml

Add missing brace in dpu-qcm2290.yaml. While we are at it, also fix
indentation for another brace, so it matches the corresponding line.

Reported-by: Rob Herring <robh@kernel.org>
Cc: Loic Poulain <loic.poulain@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Fixes: 164f69d9d45a ("dt-bindings: msm: disp: add yaml schemas for QCM2290 DPU bindings")
Link: https://lore.kernel.org/r/20220302001410.2264039-1-dmitry.baryshkov@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

drm/amdgpu: remove redundant null check

Remove the redundant null check since the caller ensures
that 'ctx' is never NULL.

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Weiguo Li <liwg06@foxmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/sdma5: drop unused cyan skillfish firmware

Leftover from bring up.  Not used anymore.

Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/gfx10: drop unused cyan skillfish firmware

Leftover from bring up.  Not used anymore.

Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: remove unused gpu_info firmwares

These were leftover from bring up and are no longer
necessary.  The information is available via
the IP discovery table.

Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Use IP versions in convert_tiling_flags_to_modifier()

Rather than checking the asic_type.

Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Modify plane removal sequence to avoid hangs.

Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: new v3 SmuMetrics data structure for Sienna Cichlid

structure changed in smc_fw_version >= 0x3A4900,
    "uint16_t VcnActivityPercentage" replaced with
    "uint16_t VcnUsagePercentage0" and "uint16_t VcnUsagePercentage1"

Signed-off-by: Danijel Slivka <danijel.slivka@amd.com>
Acked-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: enable gfxoff routine for GC 10.3.7

Enable gfxoff routine for GC 10.3.7.

Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: enable gfx power gating for GC 10.3.7

Enable gfx power gating for GC 10.3.7.

Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/nv: enable clock gating for GC 10.3.7 subblock

This will enable the following block clock gating.

 - MC
 - SDMA
 - HDP
 - ATHUB
 - IH
 - VCN/JPEG

Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: enable gfx clock gating control for GC 10.3.7

Enable gfx cg gate/ungate control for GC 10.3.7.

Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix suspend/resume hang regression

Regression has been reported that suspend/resume may hang with
the previous vm ready check commit.

So bring back the evicted list check as a temp fix.

Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1922
Fixes: c1a66c3bc425 ("drm/amdgpu: check vm ready by amdgpu_vm->evicting flag")
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Qiang Yu <qiang.yu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Move CAP firmware loading to the beginning of PSP firmware list

[Why]
As PSP needs to verify the signature, CAP firmware must be loaded first when PSP loads firmwares.
Otherwise, when DFC feature is enabled, CP firmwares would be loaded failed.

[ 1149.160480] [drm] MM table gpu addr = 0x800022f000, cpu addr = 00000000a62afcea.
[ 1149.209874] [drm] failed to load ucode CP_CE(0x8)
[ 1149.209878] [drm] psp gfx command LOAD_IP_FW(0x6) failed and response status is (0xFFFF0007)
[ 1149.215914] [drm] failed to load ucode CP_PFP(0x9)
[ 1149.215917] [drm] psp gfx command LOAD_IP_FW(0x6) failed and response status is (0xFFFF0007)
[ 1149.221941] [drm] failed to load ucode CP_ME(0xA)
[ 1149.221944] [drm] psp gfx command LOAD_IP_FW(0x6) failed and response status is (0xFFFF0007)
[ 1149.228082] [drm] failed to load ucode CP_MEC1(0xB)
[ 1149.228085] [drm] psp gfx command LOAD_IP_FW(0x6) failed and response status is (0xFFFF0007)
[ 1149.234209] [drm] failed to load ucode CP_MEC2(0xD)
[ 1149.234212] [drm] psp gfx command LOAD_IP_FW(0x6) failed and response status is (0xFFFF0007)
[ 1149.242379] [drm] failed to load ucode VCN(0x1C)
[ 1149.242382] [drm] psp gfx command LOAD_IP_FW(0x6) failed and response status is (0xFFFF0007)

[How]
Move CAP UCODE ID to the beginning of AMDGPU_UCODE_ID enum list.

Signed-off-by: Yifan Zha <Yifan.Zha@amd.com>
Reviewed-by: Bokun Zhang <Bokun.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Bump minor version for hot plug tests enabling.

This will allow to enable the tests only after latest fix
after which the tests passed on my system.

I tested on NV21 standalone and Vega 10 and Polaris as
pair with DRI_PRIME.

It's possible there might be still issues on ASICs i don't
have at my posession but that that the point of enbling
the tests finally - if other people during testing will
encounter errors they will report and I will be able to fix.

The releated merge request for enabling libdrm tests suite  is in
https://gitlab.freedesktop.org/mesa/drm/-/merge_requests/227

Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Fix sigsev when accessing MMIO on hot unplug.

Protect with drm_dev_enter/exit

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: convert code name to ip version for noretry set

Use IP version rather than codename for noretry set.

Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: move amdgpu_gmc_noretry_set after ip_versions populated

otherwise adev->ip_versions is still empty when amdgpu_gmc_noretry_set
is called.

Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Remove redundant .ras_fini initialization in some ras blocks

1. Define amdgpu_ras_block_late_fini_default in amdgpu_ras.c as
   .ras_fini common function, which is called when
   .ras_fini of ras block isn't initialized.
2. Remove the code of using amdgpu_ras_block_late_fini to
   initialize .ras_fini in ras blocks.

Signed-off-by: yipechai <YiPeng.Chai@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Remove redundant calls of amdgpu_ras_block_late_fini in mca ras block

Remove redundant calls of amdgpu_ras_block_late_fini in mca ras block.

Signed-off-by: yipechai <YiPeng.Chai@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Remove redundant calls of amdgpu_ras_block_late_fini in sdma ras block

Remove redundant calls of amdgpu_ras_block_late_fini in sdma ras block.

Signed-off-by: yipechai <YiPeng.Chai@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Remove redundant calls of amdgpu_ras_block_late_fini in hdp ras block

Remove redundant calls of amdgpu_ras_block_late_fini in hdp ras block.

Signed-off-by: yipechai <YiPeng.Chai@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Remove redundant calls of amdgpu_ras_block_late_fini in xgmi ras block

Remove redundant calls of amdgpu_ras_block_late_fini in xgmi ras block.

Signed-off-by: yipechai <YiPeng.Chai@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Remove redundant calls of amdgpu_ras_block_late_fini in umc ras block

Remove redundant calls of amdgpu_ras_block_late_fini in umc ras block.

Signed-off-by: yipechai <YiPeng.Chai@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Remove redundant calls of amdgpu_ras_block_late_fini in nbio ras block

Remove redundant calls of amdgpu_ras_block_late_fini in nbio ras block.

Signed-off-by: yipechai <YiPeng.Chai@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Remove redundant calls of amdgpu_ras_block_late_fini in mmhub ras block

Remove redundant calls of amdgpu_ras_block_late_fini in mmhub ras block.

Signed-off-by: yipechai <YiPeng.Chai@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Remove redundant calls of amdgpu_ras_block_late_fini in gfx ras block

Remove redundant calls of amdgpu_ras_block_late_fini in gfx ras block.

Signed-off-by: yipechai <YiPeng.Chai@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: centrally calls the .ras_fini function of all ras blocks

centrally calls the .ras_fini function of all ras blocks.

Signed-off-by: yipechai <YiPeng.Chai@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Optimize xxx_ras_fini function of each ras block

1. Move the variables of ras block instance members from
   specific xxx_ras_fini to general ras_fini call.
2. Function calls inside the modules only use parameters
   passed from xxx_ras_fini instead of ras block instance
   members.

Signed-off-by: yipechai <YiPeng.Chai@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Modify .ras_fini function pointer parameter

Modify .ras_fini function pointer parameter so that
we can remove redundant intermediate calls in some
ras blocks.

Signed-off-by: yipechai <YiPeng.Chai@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Adding a dc_debug option and dmub setting to use PHY FSM for PSR

[Why]
PSR Power on/off is done in PSR. Add a dc_debug option
and dmub setting to use PHY implementation of this instead.

[How]
Add a dc_debug option and dmub setting to use
PHY FSM Power up/down for PSR.

Co-authored-by: Shah Dharati <dharati.shah@amd.com>
Reviewed-by: Hansen Dsouza <hansen.dsouza@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Shah Dharati <dharati.shah@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add frame alternate 3D & restrict HW packed on dongles

[WHY?]
Some projectors support frame alternate 3D modes at 120Hz, but DAL3 does
not create timings. Most active DP to HDMI dongles do not translate
infoframes properly to use HW packing stereo mode.

[HOW?]
Create frame alternate 3D timings for displays that support it. Disable HW
packing 3D mode on DP active dongles.

Reviewed-by: Martin Leung <Martin.Leung@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Fix realloc of ptr

Clang static analysis reports this error
amdgpu_debugfs.c:1690:9: warning: 1st function call
  argument is an uninitialized value
  tmp = krealloc_array(tmp, i + 1,
        ^~~~~~~~~~~~~~~~~~~~~~~~~~~

realloc uses tmp, so tmp can not be garbage.
And the return needs to be checked.

Fixes: 5ce5a584cb82 ("drm/amdgpu: add debugfs for reset registers list")
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Reset VIC if HDMI_VIC is present

[Why]
HDMI Compliance requires VIC to be set to 0
on 2D mode if HDMI_VIC is present.

[How]
When VIC and HDMI_VIC is both present,
reset VIC to 0.

Reviewed-by: Martin Leung <Martin.Leung@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Chris Park <Chris.Park@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>