verify_pefile: relax wrapper length check

[ Upstream commit 4fc5c74dde69a7eda172514aaeb5a7df3600adb3 ]

The PE Format Specification (section "The Attribute Certificate Table
(Image Only)") states that `dwLength` is to be rounded up to 8-byte
alignment when used for traversal.  Therefore, the field is not required
to be an 8-byte multiple in the first place.

Accordingly, pesign has not performed this alignment since version
0.110.  This causes kexec failure on pesign'd binaries with "PEFILE:
Signature wrapper len wrong".  Update the comment and relax the check.

Signed-off-by: Robbie Harwood <rharwood@redhat.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Jarkko Sakkinen <jarkko@kernel.org>
cc: Eric Biederman <ebiederm@xmission.com>
cc: Herbert Xu <herbert@gondor.apana.org.au>
cc: keyrings@vger.kernel.org
cc: linux-crypto@vger.kernel.org
cc: kexec@lists.infradead.org
Link: https://learn.microsoft.com/en-us/windows/win32/debug/pe-format#the-attribute-certificate-table-image-only
Link: https://github.com/rhboot/pesign
Link: https://lore.kernel.org/r/20230220171254.592347-2-rharwood@redhat.com/
Signed-off-by: Sasha Levin <sashal@kernel.org>

hwmon: (xgene) Fix ioremap and memremap leak

[ Upstream commit 813cc94c7847ae4a17e9f744fb4dbdf7df6bd732 ]

Smatch reports:

drivers/hwmon/xgene-hwmon.c:757 xgene_hwmon_probe() warn:
'ctx->pcc_comm_addr' from ioremap() not released on line: 757.

This is because in drivers/hwmon/xgene-hwmon.c:701 xgene_hwmon_probe(),
ioremap and memremap is not released, which may cause a leak.

To fix this, ioremap and memremap is modified to devm_ioremap and
devm_memremap.

Signed-off-by: Tianyi Jing <jingfelix@hust.edu.cn>
Reviewed-by: Dongliang Mu <dzm91@hust.edu.cn>
Link: https://lore.kernel.org/r/20230318143851.2191625-1-jingfelix@hust.edu.cn
[groeck: Fixed formatting and subject]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

hwmon: (peci/cputemp) Fix miscalculated DTS for SKX

[ Upstream commit 2b91c4a870c9830eaf95e744454c9c218cccb736 ]

For Skylake, DTS temperature of the CPU is reported in S10.6 format
instead of S8.8.

Reported-by: Paul Fertser <fercerpav@gmail.com>
Link: https://lore.kernel.org/lkml/ZBhHS7v+98NK56is@home.paul.comp/
Signed-off-by: Iwona Winiarska <iwona.winiarska@intel.com>
Link: https://lore.kernel.org/r/20230321090410.866766-1-iwona.winiarska@intel.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm: panel-orientation-quirks: Add quirk for Lenovo Yoga Book X90F

[ Upstream commit 03aecb1acbcd7a660f97d645ca6c09d9de27ff9d ]

Like the Windows Lenovo Yoga Book X91F/L the Android Lenovo Yoga Book
X90F/L has a portrait 1200x1920 screen used in landscape mode,
add a quirk for this.

When the quirk for the X91F/L was initially added it was written to
also apply to the X90F/L but this does not work because the Android
version of the Yoga Book uses completely different DMI strings.
Also adjust the X91F/L quirk to reflect that it only applies to
the X91F/L models.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230301095218.28457-1-hdegoede@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

ACPI: video: Add backlight=native DMI quirk for Acer Aspire 3830TG

[ Upstream commit 5e7a3bf65db57461d0f47955248fcadf37321a74 ]

The Acer Aspire 3830TG predates Windows 8, so it defaults to using
acpi_video# for backlight control, but this is non functional on
this model.

Add a DMI quirk to use the native backlight interface which does
work properly.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

block: ublk_drv: mark device as LIVE before adding disk

[ Upstream commit 4985e7b2c002eb4c5c794a1d3acd91b82c89a0fd ]

IO can be started before add_disk() returns, such as reading parititon table,
then the monitor work should work for making forward progress.

So mark device as LIVE before adding disk, meantime change to
DEAD if add_disk() fails.

Fixed: 71f28f3136af ("ublk_drv: add io_uring based userspace block driver")
Reviewed-by: Ziyang Zhang <ZiyangZhang@linux.alibaba.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20230318141231.55562-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

efi: sysfb_efi: Add quirk for Lenovo Yoga Book X91F/L

[ Upstream commit 5ed213dd64681f84a01ceaa82fb336cf7d59ddcf ]

Another Lenovo convertable which reports a landscape resolution of
1920x1200 with a pitch of (1920 * 4) bytes, while the actual framebuffer
has a resolution of 1200x1920 with a pitch of (1200 * 4) bytes.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

i2c: hisi: Avoid redundant interrupts

[ Upstream commit cc9812a3096d1986caca9a23bee99effc45c08df ]

After issuing all the messages we can disable the TX_EMPTY interrupts
to avoid handling redundant interrupts. For doing a sinlge bus
detection (i2cdetect -y -r 0) we can reduce ~97% interrupts (before
~12000 after ~400).

Signed-off-by: Sheng Feng <fengsheng5@huawei.com>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

i2c: imx-lpi2c: clean rx/tx buffers upon new message

[ Upstream commit 987dd36c0141f6ab9f0fbf14d6b2ec3342dedb2f ]

When start sending a new message clear the Rx & Tx buffer pointers in
order to avoid using stale pointers.

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Tested-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: mwifiex: mark OF related data as maybe unused

[ Upstream commit 139f6973bf140c65d4d1d4bde5485badb4454d7a ]

The driver can be compile tested with !CONFIG_OF making certain data
unused:

  drivers/net/wireless/marvell/mwifiex/sdio.c:498:34: error: ‘mwifiex_sdio_of_match_table’ defined but not used [-Werror=unused-const-variable=]
  drivers/net/wireless/marvell/mwifiex/pcie.c:175:34: error: ‘mwifiex_pcie_of_match_table’ defined but not used [-Werror=unused-const-variable=]

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230312132523.352182-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests/bpf: Fix progs/find_vma_fail1.c build error.

[ Upstream commit 32513d40d908b267508d37994753d9bd1600914b ]

The commit 11e456cae91e ("selftests/bpf: Fix compilation errors: Assign a value to a constant")
fixed the issue cleanly in bpf-next.
This is an alternative fix in bpf tree to avoid merge conflict between bpf and bpf-next.

Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

power: supply: axp288_fuel_gauge: Added check for negative values

[ Upstream commit bf6c880d5d1448489ebf92e2d13d5713ff644930 ]

Variable 'pirq', which may receive negative value
in platform_get_irq().
Used as an index in a function regmap_irq_get_virq().

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Signed-off-by: Denis Arefev <arefev@swemel.ru>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

power: supply: cros_usbpd: reclassify "default case!" as debug

[ Upstream commit 14c76b2e75bca4d96e2b85a0c12aa43e84fe3f74 ]

This doesn't need to be printed every second as an error:
...
<3>[17438.628385] cros-usbpd-charger cros-usbpd-charger.3.auto: Port 1: default case!
<3>[17439.634176] cros-usbpd-charger cros-usbpd-charger.3.auto: Port 1: default case!
<3>[17440.640298] cros-usbpd-charger cros-usbpd-charger.3.auto: Port 1: default case!
...

Reduce priority from ERROR to DEBUG.

Signed-off-by: Grant Grundler <grundler@chromium.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

power: supply: rk817: Fix unsigned comparison with less than zero

[ Upstream commit 3268a4d9b0b85a4382e93bdf7be5400a73db74c5 ]

The tmp is defined as u32 type, which results in invalid processing of
tmp<0 in function rk817_read_or_set_full_charge_on_boot(). Therefore,
drop the comparison.

drivers/power/supply/rk817_charger.c:828 rk817_read_or_set_full_charge_on_boot() warn: unsigned 'tmp' is never less than zero.
drivers/power/supply/rk817_charger.c:788 rk817_read_or_set_full_charge_on_boot() warn: unsigned 'tmp' is never less than zero.

Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=3444
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Tested-by: Chris Morgan <macromorgan@hotmail.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: qcom: apq8026-lg-lenok: add missing reserved memory

[ Upstream commit ecd240875e877d78fd03efbc62292f550872df3f ]

Turns out these two memory regions also need to be avoided, otherwise
weird things will happen when Linux tries to use this memory.

Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230308-lenok-reserved-memory-v1-1-b8bf6ff01207@z3ntu.xyz
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: 9290/1: uaccess: Fix KASAN false-positives

[ Upstream commit ceac10c83b330680cc01ceaaab86cd49f4f30d81 ]

__copy_to_user_memcpy() and __clear_user_memset() had been calling
memcpy() and memset() respectively, leading to false-positive KASAN
reports when starting userspace:

    [   10.707901] Run /init as init process
    [   10.731892] process '/bin/busybox' started with executable stack
    [   10.745234] ==================================================================
    [   10.745796] BUG: KASAN: user-memory-access in __clear_user_memset+0x258/0x3ac
    [   10.747260] Write of size 2687 at addr 000de581 by task init/1

Use __memcpy() and __memset() instead to allow userspace access, which
is of course the intent of these functions.

Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Zev Weiss <zev@bewilderbeest.net>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

libbpf: Fix single-line struct definition output in btf_dump

[ Upstream commit 872aec4b5f635d94111d48ec3c57fbe078d64e7d ]

btf_dump APIs emit unnecessary tabs when emitting struct/union
definition that fits on the single line. Before this patch we'd get:

struct blah {<tab>};

This patch fixes this and makes sure that we get more natural:

struct blah {};

Fixes: 44a726c3f23c ("bpftool: Print newline before '}' for struct with padding only fields")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20221212211505.558851-2-andrii@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

skbuff: Fix a race between coalescing and releasing SKBs

[ Upstream commit 0646dc31ca886693274df5749cd0c8c1eaaeb5ca ]

Commit 1effe8ca4e34 ("skbuff: fix coalescing for page_pool fragment
recycling") allowed coalescing to proceed with non page pool page and page
pool page when @from is cloned, i.e.

to->pp_recycle    --> false
from->pp_recycle  --> true
skb_cloned(from)  --> true

However, it actually requires skb_cloned(@from) to hold true until
coalescing finishes in this situation. If the other cloned SKB is
released while the merging is in process, from_shinfo->nr_frags will be
set to 0 toward the end of the function, causing the increment of frag
page _refcount to be unexpectedly skipped resulting in inconsistent
reference counts. Later when SKB(@to) is released, it frees the page
directly even though the page pool page is still in use, leading to
use-after-free or double-free errors. So it should be prohibited.

The double-free error message below prompted us to investigate:
BUG: Bad page state in process swapper/1  pfn:0e0d1
page:00000000c6548b28 refcount:-1 mapcount:0 mapping:0000000000000000
index:0x2 pfn:0xe0d1
flags: 0xfffffc0000000(node=0|zone=1|lastcpupid=0x1fffff)
raw: 000fffffc0000000 0000000000000000 ffffffff00000101 0000000000000000
raw: 0000000000000002 0000000000000000 ffffffffffffffff 0000000000000000
page dumped because: nonzero _refcount

CPU: 1 PID: 0 Comm: swapper/1 Tainted: G            E      6.2.0+
Call Trace:
 <IRQ>
dump_stack_lvl+0x32/0x50
bad_page+0x69/0xf0
free_pcp_prepare+0x260/0x2f0
free_unref_page+0x20/0x1c0
skb_release_data+0x10b/0x1a0
napi_consume_skb+0x56/0x150
net_rx_action+0xf0/0x350
? __napi_schedule+0x79/0x90
__do_softirq+0xc8/0x2b1
__irq_exit_rcu+0xb9/0xf0
common_interrupt+0x82/0xa0
</IRQ>
<TASK>
asm_common_interrupt+0x22/0x40
RIP: 0010:default_idle+0xb/0x20

Fixes: 53e0961da1c7 ("page_pool: add frag page recycling support in page pool")
Signed-off-by: Liang Chen <liangchen.linux@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230413090353.14448-1-liangchen.linux@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: macb: fix a memory corruption in extended buffer descriptor mode

[ Upstream commit e8b74453555872851bdd7ea43a7c0ec39659834f ]

For quite some time we were chasing a bug which looked like a sudden
permanent failure of networking and mmc on some of our devices.
The bug was very sensitive to any software changes and even more to
any kernel debug options.

Finally we got a setup where the problem was reproducible with
CONFIG_DMA_API_DEBUG=y and it revealed the issue with the rx dma:

[   16.992082] ------------[ cut here ]------------
[   16.996779] DMA-API: macb ff0b0000.ethernet: device driver tries to free DMA memory it has not allocated [device address=0x0000000875e3e244] [size=1536 bytes]
[   17.011049] WARNING: CPU: 0 PID: 85 at kernel/dma/debug.c:1011 check_unmap+0x6a0/0x900
[   17.018977] Modules linked in: xxxxx
[   17.038823] CPU: 0 PID: 85 Comm: irq/55-8000f000 Not tainted 5.4.0 #28
[   17.045345] Hardware name: xxxxx
[   17.049528] pstate: 60000005 (nZCv daif -PAN -UAO)
[   17.054322] pc : check_unmap+0x6a0/0x900
[   17.058243] lr : check_unmap+0x6a0/0x900
[   17.062163] sp : ffffffc010003c40
[   17.065470] x29: ffffffc010003c40 x28: 000000004000c03c
[   17.070783] x27: ffffffc010da7048 x26: ffffff8878e38800
[   17.076095] x25: ffffff8879d22810 x24: ffffffc010003cc8
[   17.081407] x23: 0000000000000000 x22: ffffffc010a08750
[   17.086719] x21: ffffff8878e3c7c0 x20: ffffffc010acb000
[   17.092032] x19: 0000000875e3e244 x18: 0000000000000010
[   17.097343] x17: 0000000000000000 x16: 0000000000000000
[   17.102647] x15: ffffff8879e4a988 x14: 0720072007200720
[   17.107959] x13: 0720072007200720 x12: 0720072007200720
[   17.113261] x11: 0720072007200720 x10: 0720072007200720
[   17.118565] x9 : 0720072007200720 x8 : 000000000000022d
[   17.123869] x7 : 0000000000000015 x6 : 0000000000000098
[   17.129173] x5 : 0000000000000000 x4 : 0000000000000000
[   17.134475] x3 : 00000000ffffffff x2 : ffffffc010a1d370
[   17.139778] x1 : b420c9d75d27bb00 x0 : 0000000000000000
[   17.145082] Call trace:
[   17.147524]  check_unmap+0x6a0/0x900
[   17.151091]  debug_dma_unmap_page+0x88/0x90
[   17.155266]  gem_rx+0x114/0x2f0
[   17.158396]  macb_poll+0x58/0x100
[   17.161705]  net_rx_action+0x118/0x400
[   17.165445]  __do_softirq+0x138/0x36c
[   17.169100]  irq_exit+0x98/0xc0
[   17.172234]  __handle_domain_irq+0x64/0xc0
[   17.176320]  gic_handle_irq+0x5c/0xc0
[   17.179974]  el1_irq+0xb8/0x140
[   17.183109]  xiic_process+0x5c/0xe30
[   17.186677]  irq_thread_fn+0x28/0x90
[   17.190244]  irq_thread+0x208/0x2a0
[   17.193724]  kthread+0x130/0x140
[   17.196945]  ret_from_fork+0x10/0x20
[   17.200510] ---[ end trace 7240980785f81d6f ]---

[  237.021490] ------------[ cut here ]------------
[  237.026129] DMA-API: exceeded 7 overlapping mappings of cacheline 0x0000000021d79e7b
[  237.033886] WARNING: CPU: 0 PID: 0 at kernel/dma/debug.c:499 add_dma_entry+0x214/0x240
[  237.041802] Modules linked in: xxxxx
[  237.061637] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G        W         5.4.0 #28
[  237.068941] Hardware name: xxxxx
[  237.073116] pstate: 80000085 (Nzcv daIf -PAN -UAO)
[  237.077900] pc : add_dma_entry+0x214/0x240
[  237.081986] lr : add_dma_entry+0x214/0x240
[  237.086072] sp : ffffffc010003c30
[  237.089379] x29: ffffffc010003c30 x28: ffffff8878a0be00
[  237.094683] x27: 0000000000000180 x26: ffffff8878e387c0
[  237.099987] x25: 0000000000000002 x24: 0000000000000000
[  237.105290] x23: 000000000000003b x22: ffffffc010a0fa00
[  237.110594] x21: 0000000021d79e7b x20: ffffffc010abe600
[  237.115897] x19: 00000000ffffffef x18: 0000000000000010
[  237.121201] x17: 0000000000000000 x16: 0000000000000000
[  237.126504] x15: ffffffc010a0fdc8 x14: 0720072007200720
[  237.131807] x13: 0720072007200720 x12: 0720072007200720
[  237.137111] x11: 0720072007200720 x10: 0720072007200720
[  237.142415] x9 : 0720072007200720 x8 : 0000000000000259
[  237.147718] x7 : 0000000000000001 x6 : 0000000000000000
[  237.153022] x5 : ffffffc010003a20 x4 : 0000000000000001
[  237.158325] x3 : 0000000000000006 x2 : 0000000000000007
[  237.163628] x1 : 8ac721b3a7dc1c00 x0 : 0000000000000000
[  237.168932] Call trace:
[  237.171373]  add_dma_entry+0x214/0x240
[  237.175115]  debug_dma_map_page+0xf8/0x120
[  237.179203]  gem_rx_refill+0x190/0x280
[  237.182942]  gem_rx+0x224/0x2f0
[  237.186075]  macb_poll+0x58/0x100
[  237.189384]  net_rx_action+0x118/0x400
[  237.193125]  __do_softirq+0x138/0x36c
[  237.196780]  irq_exit+0x98/0xc0
[  237.199914]  __handle_domain_irq+0x64/0xc0
[  237.204000]  gic_handle_irq+0x5c/0xc0
[  237.207654]  el1_irq+0xb8/0x140
[  237.210789]  arch_cpu_idle+0x40/0x200
[  237.214444]  default_idle_call+0x18/0x30
[  237.218359]  do_idle+0x200/0x280
[  237.221578]  cpu_startup_entry+0x20/0x30
[  237.225493]  rest_init+0xe4/0xf0
[  237.228713]  arch_call_rest_init+0xc/0x14
[  237.232714]  start_kernel+0x47c/0x4a8
[  237.236367] ---[ end trace 7240980785f81d70 ]---

Lars was fast to find an explanation: according to the datasheet
bit 2 of the rx buffer descriptor entry has a different meaning in the
extended mode:
  Address [2] of beginning of buffer, or
  in extended buffer descriptor mode (DMA configuration register [28] = 1),
  indicates a valid timestamp in the buffer descriptor entry.

The macb driver didn't mask this bit while getting an address and it
eventually caused a memory corruption and a dma failure.

The problem is resolved by explicitly clearing the problematic bit
if hw timestamping is used.

Fixes: 7b4296148066 ("net: macb: Add support for PTP timestamps in DMA descriptors")
Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev>
Co-developed-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20230412232144.770336-1-roman.gushchin@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

udp6: fix potential access to stale information

[ Upstream commit 1c5950fc6fe996235f1d18539b9c6b64b597f50f ]

lena wang reported an issue caused by udpv6_sendmsg()
mangling msg->msg_name and msg->msg_namelen, which
are later read from ____sys_sendmsg() :

/*
 * If this is sendmmsg() and sending to current destination address was
 * successful, remember it.
 */
if (used_address && err >= 0) {
used_address->name_len = msg_sys->msg_namelen;
if (msg_sys->msg_name)
memcpy(&used_address->name, msg_sys->msg_name,
       used_address->name_len);
}

udpv6_sendmsg() wants to pretend the remote address family
is AF_INET in order to call udp_sendmsg().

A fix would be to modify the address in-place, instead
of using a local variable, but this could have other side effects.

Instead, restore initial values before we return from udpv6_sendmsg().

Fixes: c71d8ebe7a44 ("net: Fix security_socket_sendmsg() bypass problem.")
Reported-by: lena wang <lena.wang@mediatek.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Maciej Żenczykowski <maze@google.com>
Link: https://lore.kernel.org/r/20230412130308.1202254-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests: openvswitch: adjust datapath NL message declaration

[ Upstream commit 306dc21361993f4fe50a15d4db6b1a4de5d0adb0 ]

The netlink message for creating a new datapath takes an array
of ports for the PID creation.  This shouldn't cause much issue
but correct it for future cases where we need to do decode of
datapath information that could include the per-cpu PID map.

Fixes: 25f16c873fb1 ("selftests: add openvswitch selftest suite")
Signed-off-by: Aaron Conole <aconole@redhat.com>
Link: https://lore.kernel.org/r/20230412115828.3991806-1-aconole@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/core: Fix GID entry ref leak when create_ah fails

[ Upstream commit aca3b0fa3d04b40c96934d86cc224cccfa7ea8e0 ]

If AH create request fails, release sgid_attr to avoid GID entry
referrence leak reported while releasing GID table

Fixes: 1a1f460ff151 ("RDMA: Hold the sgid_attr inside the struct ib_ah/qp")
Link: https://lore.kernel.org/r/20230401063424.342204-1-saravanan.vajravel@broadcom.com
Reviewed-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Saravanan Vajravel <saravanan.vajravel@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

sctp: fix a potential overflow in sctp_ifwdtsn_skip

[ Upstream commit 32832a2caf82663870126c5186cf8f86c8b2a649 ]

Currently, when traversing ifwdtsn skips with _sctp_walk_ifwdtsn, it only
checks the pos against the end of the chunk. However, the data left for
the last pos may be < sizeof(struct sctp_ifwdtsn_skip), and dereference
it as struct sctp_ifwdtsn_skip may cause coverflow.

This patch fixes it by checking the pos against "the end of the chunk -
sizeof(struct sctp_ifwdtsn_skip)" in sctp_ifwdtsn_skip, similar to
sctp_fwdtsn_skip.

Fixes: 0fc2ea922c8a ("sctp: implement validate_ftsn for sctp_stream_interleave")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Link: https://lore.kernel.org/r/2a71bffcd80b4f2c61fac6d344bb2f11c8fd74f7.1681155810.git.lucien.xin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: qrtr: Fix an uninit variable access bug in qrtr_tx_resume()

[ Upstream commit 6417070918de3bcdbe0646e7256dae58fd8083ba ]

Syzbot reported a bug as following:

=====================================================
BUG: KMSAN: uninit-value in qrtr_tx_resume+0x185/0x1f0 net/qrtr/af_qrtr.c:230
 qrtr_tx_resume+0x185/0x1f0 net/qrtr/af_qrtr.c:230
 qrtr_endpoint_post+0xf85/0x11b0 net/qrtr/af_qrtr.c:519
 qrtr_tun_write_iter+0x270/0x400 net/qrtr/tun.c:108
 call_write_iter include/linux/fs.h:2189 [inline]
 aio_write+0x63a/0x950 fs/aio.c:1600
 io_submit_one+0x1d1c/0x3bf0 fs/aio.c:2019
 __do_sys_io_submit fs/aio.c:2078 [inline]
 __se_sys_io_submit+0x293/0x770 fs/aio.c:2048
 __x64_sys_io_submit+0x92/0xd0 fs/aio.c:2048
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x63/0xcd

Uninit was created at:
 slab_post_alloc_hook mm/slab.h:766 [inline]
 slab_alloc_node mm/slub.c:3452 [inline]
 __kmem_cache_alloc_node+0x71f/0xce0 mm/slub.c:3491
 __do_kmalloc_node mm/slab_common.c:967 [inline]
 __kmalloc_node_track_caller+0x114/0x3b0 mm/slab_common.c:988
 kmalloc_reserve net/core/skbuff.c:492 [inline]
 __alloc_skb+0x3af/0x8f0 net/core/skbuff.c:565
 __netdev_alloc_skb+0x120/0x7d0 net/core/skbuff.c:630
 qrtr_endpoint_post+0xbd/0x11b0 net/qrtr/af_qrtr.c:446
 qrtr_tun_write_iter+0x270/0x400 net/qrtr/tun.c:108
 call_write_iter include/linux/fs.h:2189 [inline]
 aio_write+0x63a/0x950 fs/aio.c:1600
 io_submit_one+0x1d1c/0x3bf0 fs/aio.c:2019
 __do_sys_io_submit fs/aio.c:2078 [inline]
 __se_sys_io_submit+0x293/0x770 fs/aio.c:2048
 __x64_sys_io_submit+0x92/0xd0 fs/aio.c:2048
 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
 do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80
 entry_SYSCALL_64_after_hwframe+0x63/0xcd

It is because that skb->len requires at least sizeof(struct qrtr_ctrl_pkt)
in qrtr_tx_resume(). And skb->len equals to size in qrtr_endpoint_post().
But size is less than sizeof(struct qrtr_ctrl_pkt) when qrtr_cb->type
equals to QRTR_TYPE_RESUME_TX in qrtr_endpoint_post() under the syzbot
scenario. This triggers the uninit variable access bug.

Add size check when qrtr_cb->type equals to QRTR_TYPE_RESUME_TX in
qrtr_endpoint_post() to fix the bug.

Fixes: 5fdeb0d372ab ("net: qrtr: Implement outgoing flow control")
Reported-by: syzbot+4436c9630a45820fda76@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?id=c14607f0963d27d5a3d5f4c8639b500909e43540
Suggested-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230410012352.3997823-1-william.xuanziyang@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cgroup,freezer: hold cpu_hotplug_lock before freezer_mutex

[ Upstream commit 57dcd64c7e036299ef526b400a8d12b8a2352f26 ]

syzbot is reporting circular locking dependency between cpu_hotplug_lock
and freezer_mutex, for commit f5d39b020809 ("freezer,sched: Rewrite core
freezer logic") replaced atomic_inc() in freezer_apply_state() with
static_branch_inc() which holds cpu_hotplug_lock.

cpu_hotplug_lock => cgroup_threadgroup_rwsem => freezer_mutex

  cgroup_file_write() {
    cgroup_procs_write() {
      __cgroup_procs_write() {
        cgroup_procs_write_start() {
          cgroup_attach_lock() {
            cpus_read_lock() {
              percpu_down_read(&cpu_hotplug_lock);
            }
            percpu_down_write(&cgroup_threadgroup_rwsem);
          }
        }
        cgroup_attach_task() {
          cgroup_migrate() {
            cgroup_migrate_execute() {
              freezer_attach() {
                mutex_lock(&freezer_mutex);
                (...snipped...)
              }
            }
          }
        }
        (...snipped...)
      }
    }
  }

freezer_mutex => cpu_hotplug_lock

  cgroup_file_write() {
    freezer_write() {
      freezer_change_state() {
        mutex_lock(&freezer_mutex);
        freezer_apply_state() {
          static_branch_inc(&freezer_active) {
            static_key_slow_inc() {
              cpus_read_lock();
              static_key_slow_inc_cpuslocked();
              cpus_read_unlock();
            }
          }
        }
        mutex_unlock(&freezer_mutex);
      }
    }
  }

Swap locking order by moving cpus_read_lock() in freezer_apply_state()
to before mutex_lock(&freezer_mutex) in freezer_change_state().

Reported-by: syzbot <syzbot+c39682e86c9d84152f93@syzkaller.appspotmail.com>
Link: https://syzkaller.appspot.com/bug?extid=c39682e86c9d84152f93
Suggested-by: Hillf Danton <hdanton@sina.com>
Fixes: f5d39b020809 ("freezer,sched: Rewrite core freezer logic")
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: wwan: iosm: Fix error handling path in ipc_pcie_probe()

[ Upstream commit a56ef25619e079bd7d744636cf18d054d1e91982 ]

Smatch reports:
drivers/net/wwan/iosm/iosm_ipc_pcie.c:298 ipc_pcie_probe()
warn: missing unwind goto?

When dma_set_mask fails it directly returns without disabling pci
device and freeing ipc_pcie. Fix this my calling a correct goto label

As dma_set_mask returns either 0 or -EIO, we can use a goto label, as
it finally returns -EIO.

Add a set_mask_fail goto label which stands consistent with other goto
labels in this function..

Fixes: 035e3befc191 ("net: wwan: iosm: fix driver not working with INTEL_IOMMU disabled")
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

qlcnic: check pci_reset_function result

[ Upstream commit 7573099e10ca69c3be33995c1fcd0d241226816d ]

Static code analyzer complains to unchecked return value.
The result of pci_reset_function() is unchecked.
Despite, the issue is on the FLR supported code path and in that
case reset can be done with pcie_flr(), the patch uses less invasive
approach by adding the result check of pci_reset_function().

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Fixes: 7e2cf4feba05 ("qlcnic: change driver hardware interface mechanism")
Signed-off-by: Denis Plotnikov <den-plotnikov@yandex-team.ru>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/armada: Fix a potential double free in an error handling path

[ Upstream commit b89ce1177d42d5c124e83f3858818cd4e6a2c46f ]

'priv' is a managed resource, so there is no need to free it explicitly or
there will be a double free().

Fixes: 90ad200b4cbc ("drm/armada: Use devm_drm_dev_alloc")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/c4f3c9207a9fce35cb6dd2cc60e755275961588a.1640536364.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Sasha Levin <sashal@kernel.org>

Bluetooth: Set ISO Data Path on broadcast sink

[ Upstream commit d2e4f1b1cba8742db66aaf77374cab7c0c7c8656 ]

This patch enables ISO data rx on broadcast sink.

Fixes: eca0ae4aea66 ("Bluetooth: Add initial implementation of BIS connections")
Signed-off-by: Claudia Draghicescu <claudia.rosu@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Bluetooth: SCO: Fix possible circular locking dependency sco_sock_getsockopt

[ Upstream commit 975abc0c90fc485ff9b4a6afa475c3b1398d5d47 ]

This attempts to fix the following trace:

======================================================
WARNING: possible circular locking dependency detected
6.3.0-rc2-g68fcb3a7bf97 #4706 Not tainted
------------------------------------------------------
sco-tester/31 is trying to acquire lock:
ffff8880025b8070 (&hdev->lock){+.+.}-{3:3}, at:
sco_sock_getsockopt+0x1fc/0xa90

but task is already holding lock:
ffff888001eeb130 (sk_lock-AF_BLUETOOTH-BTPROTO_SCO){+.+.}-{0:0}, at:
sco_sock_getsockopt+0x104/0xa90

which lock already depends on the new lock.

the existing dependency chain (in reverse order) is:

-> #2 (sk_lock-AF_BLUETOOTH-BTPROTO_SCO){+.+.}-{0:0}:
       lock_sock_nested+0x32/0x80
       sco_connect_cfm+0x118/0x4a0
       hci_sync_conn_complete_evt+0x1e6/0x3d0
       hci_event_packet+0x55c/0x7c0
       hci_rx_work+0x34c/0xa00
       process_one_work+0x575/0x910
       worker_thread+0x89/0x6f0
       kthread+0x14e/0x180
       ret_from_fork+0x2b/0x50

-> #1 (hci_cb_list_lock){+.+.}-{3:3}:
       __mutex_lock+0x13b/0xcc0
       hci_sync_conn_complete_evt+0x1ad/0x3d0
       hci_event_packet+0x55c/0x7c0
       hci_rx_work+0x34c/0xa00
       process_one_work+0x575/0x910
       worker_thread+0x89/0x6f0
       kthread+0x14e/0x180
       ret_from_fork+0x2b/0x50

-> #0 (&hdev->lock){+.+.}-{3:3}:
       __lock_acquire+0x18cc/0x3740
       lock_acquire+0x151/0x3a0
       __mutex_lock+0x13b/0xcc0
       sco_sock_getsockopt+0x1fc/0xa90
       __sys_getsockopt+0xe9/0x190
       __x64_sys_getsockopt+0x5b/0x70
       do_syscall_64+0x42/0x90
       entry_SYSCALL_64_after_hwframe+0x70/0xda

other info that might help us debug this:

Chain exists of:
  &hdev->lock --> hci_cb_list_lock --> sk_lock-AF_BLUETOOTH-BTPROTO_SCO

 Possible unsafe locking scenario:

       CPU0                    CPU1
       ----                    ----
  lock(sk_lock-AF_BLUETOOTH-BTPROTO_SCO);
                               lock(hci_cb_list_lock);
                               lock(sk_lock-AF_BLUETOOTH-BTPROTO_SCO);
  lock(&hdev->lock);

 *** DEADLOCK ***

1 lock held by sco-tester/31:
 #0: ffff888001eeb130 (sk_lock-AF_BLUETOOTH-BTPROTO_SCO){+.+.}-{0:0},
 at: sco_sock_getsockopt+0x104/0xa90

Fixes: 248733e87d50 ("Bluetooth: Allow querying of supported offload codecs over SCO socket")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Bluetooth: Fix printing errors if LE Connection times out

[ Upstream commit b62e72200eaad523f08d8319bba50fc652e032a8 ]

This fixes errors like bellow when LE Connection times out since that
is actually not a controller error:

 Bluetooth: hci0: Opcode 0x200d failed: -110
 Bluetooth: hci0: request failed to create LE connection: err -110

Instead the code shall properly detect if -ETIMEDOUT is returned and
send HCI_OP_LE_CREATE_CONN_CANCEL to give up on the connection.

Link: https://github.com/bluez/bluez/issues/340
Fixes: 8e8b92ee60de ("Bluetooth: hci_sync: Add hci_le_create_conn_sync")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Bluetooth: hci_conn: Fix not cleaning up on LE Connection failure

[ Upstream commit 19cf60bf63cbaf5262eac400c707966e19999b83 ]

hci_connect_le_scan_cleanup shall always be invoked to cleanup the
states and re-enable passive scanning if necessary, otherwise it may
cause the pending action to stay active causing multiple attempts to
connect.

Fixes: 9b3628d79b46 ("Bluetooth: hci_sync: Cleanup hci_conn if it cannot be aborted")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: openvswitch: fix race on port output

[ Upstream commit 066b86787fa3d97b7aefb5ac0a99a22dad2d15f8 ]

assume the following setup on a single machine:
1. An openvswitch instance with one bridge and default flows
2. two network namespaces "server" and "client"
3. two ovs interfaces "server" and "client" on the bridge
4. for each ovs interface a veth pair with a matching name and 32 rx and
   tx queues
5. move the ends of the veth pairs to the respective network namespaces
6. assign ip addresses to each of the veth ends in the namespaces (needs
   to be the same subnet)
7. start some http server on the server network namespace
8. test if a client in the client namespace can reach the http server

when following the actions below the host has a chance of getting a cpu
stuck in a infinite loop:
1. send a large amount of parallel requests to the http server (around
   3000 curls should work)
2. in parallel delete the network namespace (do not delete interfaces or
   stop the server, just kill the namespace)

there is a low chance that this will cause the below kernel cpu stuck
message. If this does not happen just retry.
Below there is also the output of bpftrace for the functions mentioned
in the output.

The series of events happening here is:
1. the network namespace is deleted calling
   `unregister_netdevice_many_notify` somewhere in the process
2. this sets first `NETREG_UNREGISTERING` on both ends of the veth and
   then runs `synchronize_net`
3. it then calls `call_netdevice_notifiers` with `NETDEV_UNREGISTER`
4. this is then handled by `dp_device_event` which calls
   `ovs_netdev_detach_dev` (if a vport is found, which is the case for
   the veth interface attached to ovs)
5. this removes the rx_handlers of the device but does not prevent
   packages to be sent to the device
6. `dp_device_event` then queues the vport deletion to work in
   background as a ovs_lock is needed that we do not hold in the
   unregistration path
7. `unregister_netdevice_many_notify` continues to call
   `netdev_unregister_kobject` which sets `real_num_tx_queues` to 0
8. port deletion continues (but details are not relevant for this issue)
9. at some future point the background task deletes the vport

If after 7. but before 9. a packet is send to the ovs vport (which is
not deleted at this point in time) which forwards it to the
`dev_queue_xmit` flow even though the device is unregistering.
In `skb_tx_hash` (which is called in the `dev_queue_xmit`) path there is
a while loop (if the packet has a rx_queue recorded) that is infinite if
`dev->real_num_tx_queues` is zero.

To prevent this from happening we update `do_output` to handle devices
without carrier the same as if the device is not found (which would
be the code path after 9. is done).

Additionally we now produce a warning in `skb_tx_hash` if we will hit
the infinite loop.

bpftrace (first word is function name):

__dev_queue_xmit server: real_num_tx_queues: 1, cpu: 2, pid: 28024, tid: 28024, skb_addr: 0xffff9edb6f207000, reg_state: 1
netdev_core_pick_tx server: addr: 0xffff9f0a46d4a000 real_num_tx_queues: 1, cpu: 2, pid: 28024, tid: 28024, skb_addr: 0xffff9edb6f207000, reg_state: 1
dp_device_event server: real_num_tx_queues: 1 cpu 9, pid: 21024, tid: 21024, event 2, reg_state: 1
synchronize_rcu_expedited: cpu 9, pid: 21024, tid: 21024
synchronize_rcu_expedited: cpu 9, pid: 21024, tid: 21024
synchronize_rcu_expedited: cpu 9, pid: 21024, tid: 21024
synchronize_rcu_expedited: cpu 9, pid: 21024, tid: 21024
dp_device_event server: real_num_tx_queues: 1 cpu 9, pid: 21024, tid: 21024, event 6, reg_state: 2
ovs_netdev_detach_dev server: real_num_tx_queues: 1 cpu 9, pid: 21024, tid: 21024, reg_state: 2
netdev_rx_handler_unregister server: real_num_tx_queues: 1, cpu: 9, pid: 21024, tid: 21024, reg_state: 2
synchronize_rcu_expedited: cpu 9, pid: 21024, tid: 21024
netdev_rx_handler_unregister ret server: real_num_tx_queues: 1, cpu: 9, pid: 21024, tid: 21024, reg_state: 2
dp_device_event server: real_num_tx_queues: 1 cpu 9, pid: 21024, tid: 21024, event 27, reg_state: 2
dp_device_event server: real_num_tx_queues: 1 cpu 9, pid: 21024, tid: 21024, event 22, reg_state: 2
dp_device_event server: real_num_tx_queues: 1 cpu 9, pid: 21024, tid: 21024, event 18, reg_state: 2
netdev_unregister_kobject: real_num_tx_queues: 1, cpu: 9, pid: 21024, tid: 21024
synchronize_rcu_expedited: cpu 9, pid: 21024, tid: 21024
ovs_vport_send server: real_num_tx_queues: 0, cpu: 2, pid: 28024, tid: 28024, skb_addr: 0xffff9edb6f207000, reg_state: 2
__dev_queue_xmit server: real_num_tx_queues: 0, cpu: 2, pid: 28024, tid: 28024, skb_addr: 0xffff9edb6f207000, reg_state: 2
netdev_core_pick_tx server: addr: 0xffff9f0a46d4a000 real_num_tx_queues: 0, cpu: 2, pid: 28024, tid: 28024, skb_addr: 0xffff9edb6f207000, reg_state: 2
broken device server: real_num_tx_queues: 0, cpu: 2, pid: 28024, tid: 28024
ovs_dp_detach_port server: real_num_tx_queues: 0 cpu 9, pid: 9124, tid: 9124, reg_state: 2
synchronize_rcu_expedited: cpu 9, pid: 33604, tid: 33604

stuck message:

watchdog: BUG: soft lockup - CPU#5 stuck for 26s! [curl:1929279]
Modules linked in: veth pktgen bridge stp llc ip_set_hash_net nft_counter xt_set nft_compat nf_tables ip_set_hash_ip ip_set nfnetlink_cttimeout nfnetlink openvswitch nsh nf_conncount nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 tls binfmt_misc nls_iso8859_1 input_leds joydev serio_raw dm_multipath scsi_dh_rdac scsi_dh_emc scsi_dh_alua sch_fq_codel drm efi_pstore virtio_rng ip_tables x_tables autofs4 btrfs blake2b_generic zstd_compress raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq libcrc32c raid1 raid0 multipath linear hid_generic usbhid hid crct10dif_pclmul crc32_pclmul ghash_clmulni_intel aesni_intel virtio_net ahci net_failover crypto_simd cryptd psmouse libahci virtio_blk failover
CPU: 5 PID: 1929279 Comm: curl Not tainted 5.15.0-67-generic #74-Ubuntu
Hardware name: OpenStack Foundation OpenStack Nova, BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
RIP: 0010:netdev_pick_tx+0xf1/0x320
Code: 00 00 8d 48 ff 0f b7 c1 66 39 ca 0f 86 e9 01 00 00 45 0f b7 ff 41 39 c7 0f 87 5b 01 00 00 44 29 f8 41 39 c7 0f 87 4f 01 00 00 <eb> f2 0f 1f 44 00 00 49 8b 94 24 28 04 00 00 48 85 d2 0f 84 53 01
RSP: 0018:ffffb78b40298820 EFLAGS: 00000246
RAX: 0000000000000000 RBX: ffff9c8773adc2e0 RCX: 000000000000083f
RDX: 0000000000000000 RSI: ffff9c8773adc2e0 RDI: ffff9c870a25e000
RBP: ffffb78b40298858 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: ffff9c870a25e000
R13: ffff9c870a25e000 R14: ffff9c87fe043480 R15: 0000000000000000
FS:  00007f7b80008f00(0000) GS:ffff9c8e5f740000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f7b80f6a0b0 CR3: 0000000329d66000 CR4: 0000000000350ee0
Call Trace:
 <IRQ>
 netdev_core_pick_tx+0xa4/0xb0
 __dev_queue_xmit+0xf8/0x510
 ? __bpf_prog_exit+0x1e/0x30
 dev_queue_xmit+0x10/0x20
 ovs_vport_send+0xad/0x170 [openvswitch]
 do_output+0x59/0x180 [openvswitch]
 do_execute_actions+0xa80/0xaa0 [openvswitch]
 ? kfree+0x1/0x250
 ? kfree+0x1/0x250
 ? kprobe_perf_func+0x4f/0x2b0
 ? flow_lookup.constprop.0+0x5c/0x110 [openvswitch]
 ovs_execute_actions+0x4c/0x120 [openvswitch]
 ovs_dp_process_packet+0xa1/0x200 [openvswitch]
 ? ovs_ct_update_key.isra.0+0xa8/0x120 [openvswitch]
 ? ovs_ct_fill_key+0x1d/0x30 [openvswitch]
 ? ovs_flow_key_extract+0x2db/0x350 [openvswitch]
 ovs_vport_receive+0x77/0xd0 [openvswitch]
 ? __htab_map_lookup_elem+0x4e/0x60
 ? bpf_prog_680e8aff8547aec1_kfree+0x3b/0x714
 ? trace_call_bpf+0xc8/0x150
 ? kfree+0x1/0x250
 ? kfree+0x1/0x250
 ? kprobe_perf_func+0x4f/0x2b0
 ? kprobe_perf_func+0x4f/0x2b0
 ? __mod_memcg_lruvec_state+0x63/0xe0
 netdev_port_receive+0xc4/0x180 [openvswitch]
 ? netdev_port_receive+0x180/0x180 [openvswitch]
 netdev_frame_hook+0x1f/0x40 [openvswitch]
 __netif_receive_skb_core.constprop.0+0x23d/0xf00
 __netif_receive_skb_one_core+0x3f/0xa0
 __netif_receive_skb+0x15/0x60
 process_backlog+0x9e/0x170
 __napi_poll+0x33/0x180
 net_rx_action+0x126/0x280
 ? ttwu_do_activate+0x72/0xf0
 __do_softirq+0xd9/0x2e7
 ? rcu_report_exp_cpu_mult+0x1b0/0x1b0
 do_softirq+0x7d/0xb0
 </IRQ>
 <TASK>
 __local_bh_enable_ip+0x54/0x60
 ip_finish_output2+0x191/0x460
 __ip_finish_output+0xb7/0x180
 ip_finish_output+0x2e/0xc0
 ip_output+0x78/0x100
 ? __ip_finish_output+0x180/0x180
 ip_local_out+0x5e/0x70
 __ip_queue_xmit+0x184/0x440
 ? tcp_syn_options+0x1f9/0x300
 ip_queue_xmit+0x15/0x20
 __tcp_transmit_skb+0x910/0x9c0
 ? __mod_memcg_state+0x44/0xa0
 tcp_connect+0x437/0x4e0
 ? ktime_get_with_offset+0x60/0xf0
 tcp_v4_connect+0x436/0x530
 __inet_stream_connect+0xd4/0x3a0
 ? kprobe_perf_func+0x4f/0x2b0
 ? aa_sk_perm+0x43/0x1c0
 inet_stream_connect+0x3b/0x60
 __sys_connect_file+0x63/0x70
 __sys_connect+0xa6/0xd0
 ? setfl+0x108/0x170
 ? do_fcntl+0xe8/0x5a0
 __x64_sys_connect+0x18/0x20
 do_syscall_64+0x5c/0xc0
 ? __x64_sys_fcntl+0xa9/0xd0
 ? exit_to_user_mode_prepare+0x37/0xb0
 ? syscall_exit_to_user_mode+0x27/0x50
 ? do_syscall_64+0x69/0xc0
 ? __sys_setsockopt+0xea/0x1e0
 ? exit_to_user_mode_prepare+0x37/0xb0
 ? syscall_exit_to_user_mode+0x27/0x50
 ? __x64_sys_setsockopt+0x1f/0x30
 ? do_syscall_64+0x69/0xc0
 ? irqentry_exit+0x1d/0x30
 ? exc_page_fault+0x89/0x170
 entry_SYSCALL_64_after_hwframe+0x61/0xcb
RIP: 0033:0x7f7b8101c6a7
Code: 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 2a 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 18 89 54 24 0c 48 89 34 24 89
RSP: 002b:00007ffffd6b2198 EFLAGS: 00000246 ORIG_RAX: 000000000000002a
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f7b8101c6a7
RDX: 0000000000000010 RSI: 00007ffffd6b2360 RDI: 0000000000000005
RBP: 0000561f1370d560 R08: 00002795ad21d1ac R09: 0030312e302e302e
R10: 00007ffffd73f080 R11: 0000000000000246 R12: 0000561f1370c410
R13: 0000000000000000 R14: 0000000000000005 R15: 0000000000000000
 </TASK>

Fixes: 7f8a436eaa2c ("openvswitch: Add conntrack action")
Co-developed-by: Luca Czesla <luca.czesla@mail.schwarz>
Signed-off-by: Luca Czesla <luca.czesla@mail.schwarz>
Signed-off-by: Felix Huettner <felix.huettner@mail.schwarz>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/ZC0pBXBAgh7c76CA@kernel-bug-kernel-bug
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iavf: remove active_cvlans and active_svlans bitmaps

[ Upstream commit 9c85b7fa12ef2e4fc11a4e31ac595fb5f9d0ddf9 ]

The VLAN filters info is currently being held in a list and 2 bitmaps
(active_cvlans and active_svlans). We are experiencing some racing where
data is not in sync in the list and bitmaps. For example, the VLAN is
initially added to the list but only when the PF replies, it is added to
the bitmap. If a user adds many V2 VLANS before the PF responds:

    while [ $((i++)) ]
        ip l add l eth0 name eth0.$i type vlan id $i

we might end up with more VLAN list entries than the designated limit.
Also, The "ip link show" will show more links added than the PF limit.

On the other and, the bitmaps are only used to check the number of VLAN
filters and to re-enable the filters when the interface goes from DOWN to
UP.

This patch gets rid of the bitmaps and uses the list only. To do that,
the states of the VLAN filter are modified:
1 - IAVF_VLAN_REMOVE: the entry needs to be totally removed after informing
  the PF. This is the "ip link del eth0.$i" path.
2 - IAVF_VLAN_DISABLE: (new) the netdev went down. The filter needs to be
  removed from the PF and then marked INACTIVE.
3 - IAVF_VLAN_INACTIVE: (new) no PF filter exists, but the user did not
  delete the VLAN.

Fixes: 48ccc43ecf10 ("iavf: Add support VIRTCHNL_VF_OFFLOAD_VLAN_V2 during netdev config")
Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iavf: refactor VLAN filter states

[ Upstream commit 0c0da0e951053fda20412cd284e2714bbbb31bff ]

The VLAN filter states are currently being saved as individual bits.
This is error prone as multiple bits might be mistakenly set.

Fix by replacing the bits with a single state enum. Also, add an
"ACTIVE" state for filters that are accepted by the PF.

Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Stable-dep-of: 9c85b7fa12ef ("iavf: remove active_cvlans and active_svlans bitmaps")
Signed-off-by: Sasha Levin <sashal@kernel.org>

bonding: fix ns validation on backup slaves

[ Upstream commit 4598380f9c548aa161eb4e990a1583f0a7d1e0d7 ]

When arp_validate is set to 2, 3, or 6, validation is performed for
backup slaves as well. As stated in the bond documentation, validation
involves checking the broadcast ARP request sent out via the active
slave. This helps determine which slaves are more likely to function in
the event of an active slave failure.

However, when the target is an IPv6 address, the NS message sent from
the active interface is not checked on backup slaves. Additionally,
based on the bond_arp_rcv() rule b, we must reverse the saddr and daddr
when checking the NS message.

Note that when checking the NS message, the destination address is a
multicast address. Therefore, we must convert the target address to
solicited multicast in the bond_get_targets_ip6() function.

Prior to the fix, the backup slaves had a mii status of "down", but
after the fix, all of the slaves' mii status was updated to "UP".

Fixes: 4e24be018eb9 ("bonding: add new parameter ns_targets")
Reviewed-by: Jonathan Toppins <jtoppins@redhat.com>
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tcp: restrict net.ipv4.tcp_app_win

[ Upstream commit dc5110c2d959c1707e12df5f792f41d90614adaa ]

UBSAN: shift-out-of-bounds in net/ipv4/tcp_input.c:555:23
shift exponent 255 is too large for 32-bit type 'int'
CPU: 1 PID: 7907 Comm: ssh Not tainted 6.3.0-rc4-00161-g62bad54b26db-dirty #206
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
Call Trace:
 <TASK>
 dump_stack_lvl+0x136/0x150
 __ubsan_handle_shift_out_of_bounds+0x21f/0x5a0
 tcp_init_transfer.cold+0x3a/0xb9
 tcp_finish_connect+0x1d0/0x620
 tcp_rcv_state_process+0xd78/0x4d60
 tcp_v4_do_rcv+0x33d/0x9d0
 __release_sock+0x133/0x3b0
 release_sock+0x58/0x1b0

'maxwin' is int, shifting int for 32 or more bits is undefined behaviour.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

niu: Fix missing unwind goto in niu_alloc_channels()

[ Upstream commit 8ce07be703456acb00e83d99f3b8036252c33b02 ]

Smatch reports: drivers/net/ethernet/sun/niu.c:4525
niu_alloc_channels() warn: missing unwind goto?

If niu_rbr_fill() fails, then we are directly returning 'err' without
freeing the channels.

Fix this by changing direct return to a goto 'out_err'.

Fixes: a3138df9f20e ("[NIU]: Add Sun Neptune ethernet driver.")
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

KVM: arm64: Advertise ID_AA64PFR0_EL1.CSV2/3 to protected VMs

[ Upstream commit e81625218bf7986ba1351a98c43d346b15601d26 ]

The existing pKVM code attempts to advertise CSV2/3 using values
initialized to 0, but never set. To advertise CSV2/3 to protected
guests, pass the CSV2/3 values to hyp when initializing hyp's
view of guests' ID_AA64PFR0_EL1.

Similar to non-protected KVM, these are system-wide, rather than
per cpu, for simplicity.

Fixes: 6c30bfb18d0b ("KVM: arm64: Add handlers for protected VM System Registers")
Signed-off-by: Fuad Tabba <tabba@google.com>
Link: https://lore.kernel.org/r/20230404152321.413064-1-tabba@google.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Sasha Levin <sashal@kernel.org>

KVM: arm64: Initialise hypervisor copies of host symbols unconditionally

[ Upstream commit 6c165223e9a6384aa1e934b90f2650e71adb972a ]

The nVHE object at EL2 maintains its own copies of some host variables
so that, when pKVM is enabled, the host cannot directly modify the
hypervisor state. When running in normal nVHE mode, however, these
variables are still mirrored at EL2 but are not initialised.

Initialise the hypervisor symbols from the host copies regardless of
pKVM, ensuring that any reference to this data at EL2 with normal nVHE
will return a sensibly initialised value.

Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Vincent Donnefort <vdonnefort@google.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221110190259.26861-16-will@kernel.org
Stable-dep-of: e81625218bf7 ("KVM: arm64: Advertise ID_AA64PFR0_EL1.CSV2/3 to protected VMs")
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf, arm64: Fixed a BTI error on returning to patched function

[ Upstream commit 738a96c4a8c36950803fdd27e7c30aca92dccefd ]

When BPF_TRAMP_F_CALL_ORIG is set, BPF trampoline uses BLR to jump
back to the instruction next to call site to call the patched function.
For BTI-enabled kernel, the instruction next to call site is usually
PACIASP, in this case, it's safe to jump back with BLR. But when
the call site is not followed by a PACIASP or bti, a BTI exception
is triggered.

Here is a fault log:

 Unhandled 64-bit el1h sync exception on CPU0, ESR 0x0000000034000002 -- BTI
 CPU: 0 PID: 263 Comm: test_progs Tainted: GF
 Hardware name: linux,dummy-virt (DT)
 pstate: 40400805 (nZcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=-c)
 pc : bpf_fentry_test1+0xc/0x30
 lr : bpf_trampoline_6442573892_0+0x48/0x1000
 sp : ffff80000c0c3a50
 x29: ffff80000c0c3a90 x28: ffff0000c2e6c080 x27: 0000000000000000
 x26: 0000000000000000 x25: 0000000000000000 x24: 0000000000000050
 x23: 0000000000000000 x22: 0000ffffcfd2a7f0 x21: 000000000000000a
 x20: 0000ffffcfd2a7f0 x19: 0000000000000000 x18: 0000000000000000
 x17: 0000000000000000 x16: 0000000000000000 x15: 0000ffffcfd2a7f0
 x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000
 x11: 0000000000000000 x10: ffff80000914f5e4 x9 : ffff8000082a1528
 x8 : 0000000000000000 x7 : 0000000000000000 x6 : 0101010101010101
 x5 : 0000000000000000 x4 : 00000000fffffff2 x3 : 0000000000000001
 x2 : ffff8001f4b82000 x1 : 0000000000000000 x0 : 0000000000000001
 Kernel panic - not syncing: Unhandled exception
 CPU: 0 PID: 263 Comm: test_progs Tainted: GF
 Hardware name: linux,dummy-virt (DT)
 Call trace:
  dump_backtrace+0xec/0x144
  show_stack+0x24/0x7c
  dump_stack_lvl+0x8c/0xb8
  dump_stack+0x18/0x34
  panic+0x1cc/0x3ec
  __el0_error_handler_common+0x0/0x130
  el1h_64_sync_handler+0x60/0xd0
  el1h_64_sync+0x78/0x7c
  bpf_fentry_test1+0xc/0x30
  bpf_fentry_test1+0xc/0x30
  bpf_prog_test_run_tracing+0xdc/0x2a0
  __sys_bpf+0x438/0x22a0
  __arm64_sys_bpf+0x30/0x54
  invoke_syscall+0x78/0x110
  el0_svc_common.constprop.0+0x6c/0x1d0
  do_el0_svc+0x38/0xe0
  el0_svc+0x30/0xd0
  el0t_64_sync_handler+0x1ac/0x1b0
  el0t_64_sync+0x1a0/0x1a4
 Kernel Offset: disabled
 CPU features: 0x0000,00034c24,f994fdab
 Memory Limit: none

And the instruction next to call site of bpf_fentry_test1 is ADD,
not PACIASP:

<bpf_fentry_test1>:
bti     c
nop
nop
add     w0, w0, #0x1
paciasp

For BPF prog, JIT always puts a PACIASP after call site for BTI-enabled
kernel, so there is no problem. To fix it, replace BLR with RET to bypass
the branch target check.

Fixes: efc9909fdce0 ("bpf, arm64: Add bpf trampoline for arm64")
Reported-by: Florent Revest <revest@chromium.org>
Signed-off-by: Xu Kuohai <xukuohai@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Florent Revest <revest@chromium.org>
Acked-by: Florent Revest <revest@chromium.org>
Link: https://lore.kernel.org/bpf/20230401234144.3719742-1-xukuohai@huaweicloud.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

9p/xen : Fix use after free bug in xen_9pfs_front_remove due to race condition

[ Upstream commit ea4f1009408efb4989a0f139b70fb338e7f687d0 ]

In xen_9pfs_front_probe, it calls xen_9pfs_front_alloc_dataring
to init priv->rings and bound &ring->work with p9_xen_response.

When it calls xen_9pfs_front_event_handler to handle IRQ requests,
it will finally call schedule_work to start the work.

When we call xen_9pfs_front_remove to remove the driver, there
may be a sequence as follows:

Fix it by finishing the work before cleanup in xen_9pfs_front_free.

Note that, this bug is found by static analysis, which might be
false positive.

CPU0                  CPU1

                     |p9_xen_response
xen_9pfs_front_remove|
  xen_9pfs_front_free|
kfree(priv)          |
//free priv          |
                     |p9_tag_lookup
                     |//use priv->client

Fixes: 71ebd71921e4 ("xen/9pfs: connect to the backend")
Signed-off-by: Zheng Wang <zyytlz.wz@163.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: Eric Van Hensbergen <ericvh@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dmaengine: apple-admac: Fix 'current_tx' not getting freed

[ Upstream commit d9503be5a100c553731c0e8a82c7b4201e8a970c ]

In terminate_all we should queue up all submitted descriptors to be
freed. We do that for the content of the 'issued' and 'submitted' lists,
but the 'current_tx' descriptor falls through the cracks as it's
removed from the 'issued' list once it gets assigned to be the current
descriptor. Explicitly queue up freeing of the 'current_tx' descriptor
to address a memory leak that is otherwise present.

Fixes: b127315d9a78 ("dmaengine: apple-admac: Add Apple ADMAC driver")
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20230224152222.26732-2-povik+lin@cutebit.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dmaengine: apple-admac: Set src_addr_widths capability

[ Upstream commit 6e96adcaa7a29827ac8ee8df290a44957a4823ec ]

Add missing setting of 'src_addr_widths', which is the same as for the
other direction.

Fixes: b127315d9a78 ("dmaengine: apple-admac: Add Apple ADMAC driver")
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20230224152222.26732-3-povik+lin@cutebit.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dmaengine: apple-admac: Handle 'global' interrupt flags

[ Upstream commit a288fd158fbf85c06a9ac01cecabf97ac5d962e7 ]

In addition to TX channel and RX channel interrupt flags there's
another class of 'global' interrupt flags with unknown semantics. Those
weren't being handled up to now, and they are the suspected cause of
stuck IRQ states that have been sporadically occurring. Check the global
flags and clear them if raised.

Fixes: b127315d9a78 ("dmaengine: apple-admac: Add Apple ADMAC driver")
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20230224152222.26732-1-povik+lin@cutebit.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

LoongArch, bpf: Fix jit to skip speculation barrier opcode

[ Upstream commit a6f6a95f25803500079513780d11a911ce551d76 ]

Just skip the opcode(BPF_ST | BPF_NOSPEC) in the BPF JIT instead of
failing to JIT the entire program, given LoongArch currently has no
couterpart of a speculation barrier instruction. To verify the issue,
use the ltp testcase as shown below.

Also, Wang says:

  I can confirm there's currently no speculation barrier equivalent
  on LonogArch. (Loongson says there are builtin mitigations for
  Spectre-V1 and V2 on their chips, and AFAIK efforts to port the
  exploits to mips/LoongArch have all failed a few years ago.)

Without this patch:

  $ ./bpf_prog02
  [...]
  bpf_common.c:123: TBROK: Failed verification: ??? (524)
  [...]
  Summary:
  passed   0
  failed   0
  broken   1
  skipped  0
  warnings 0

With this patch:

  $ ./bpf_prog02
  [...]
  Summary:
  passed   0
  failed   0
  broken   0
  skipped  0
  warnings 0

Fixes: 5dc615520c4d ("LoongArch: Add BPF JIT support")
Signed-off-by: George Guo <guodongtai@kylinos.cn>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: WANG Xuerui <git@xen0n.name>
Cc: Tiezhu Yang <yangtiezhu@loongson.cn>
Link: https://lore.kernel.org/bpf/20230328071335.2664966-1-guodongtai@kylinos.cn
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf: tcp: Use sock_gen_put instead of sock_put in bpf_iter_tcp

[ Upstream commit 580031ff9952b7dbf48dedba6b56a100ae002bef ]

While reviewing the udp-iter batching patches, noticed the bpf_iter_tcp
calling sock_put() is incorrect. It should call sock_gen_put instead
because bpf_iter_tcp is iterating the ehash table which has the req sk
and tw sk. This patch replaces all sock_put with sock_gen_put in the
bpf_iter_tcp codepath.

Fixes: 04c7820b776f ("bpf: tcp: Bpf iter batching and lock_sock")
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230328004232.2134233-1-martin.lau@linux.dev
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/cma: Allow UD qp_type to join multicast only

[ Upstream commit 58e84f6b3e84e46524b7e5a916b53c1ad798bc8f ]

As for multicast:
- The SIDR is the only mode that makes sense;
- Besides PS_UDP, other port spaces like PS_IB is also allowed, as it is
  UD compatible. In this case qkey also needs to be set [1].

This patch allows only UD qp_type to join multicast, and set qkey to
default if it's not set, to fix an uninit-value error: the ib->rec.qkey
field is accessed without being initialized.

=====================================================
BUG: KMSAN: uninit-value in cma_set_qkey drivers/infiniband/core/cma.c:510 [inline]
BUG: KMSAN: uninit-value in cma_make_mc_event+0xb73/0xe00 drivers/infiniband/core/cma.c:4570
 cma_set_qkey drivers/infiniband/core/cma.c:510 [inline]
 cma_make_mc_event+0xb73/0xe00 drivers/infiniband/core/cma.c:4570
 cma_iboe_join_multicast drivers/infiniband/core/cma.c:4782 [inline]
 rdma_join_multicast+0x2b83/0x30a0 drivers/infiniband/core/cma.c:4814
 ucma_process_join+0xa76/0xf60 drivers/infiniband/core/ucma.c:1479
 ucma_join_multicast+0x1e3/0x250 drivers/infiniband/core/ucma.c:1546
 ucma_write+0x639/0x6d0 drivers/infiniband/core/ucma.c:1732
 vfs_write+0x8ce/0x2030 fs/read_write.c:588
 ksys_write+0x28c/0x520 fs/read_write.c:643
 __do_sys_write fs/read_write.c:655 [inline]
 __se_sys_write fs/read_write.c:652 [inline]
 __ia32_sys_write+0xdb/0x120 fs/read_write.c:652
 do_syscall_32_irqs_on arch/x86/entry/common.c:114 [inline]
 __do_fast_syscall_32+0x96/0xf0 arch/x86/entry/common.c:180
 do_fast_syscall_32+0x34/0x70 arch/x86/entry/common.c:205
 do_SYSENTER_32+0x1b/0x20 arch/x86/entry/common.c:248
 entry_SYSENTER_compat_after_hwframe+0x4d/0x5c

Local variable ib.i created at:
cma_iboe_join_multicast drivers/infiniband/core/cma.c:4737 [inline]
rdma_join_multicast+0x586/0x30a0 drivers/infiniband/core/cma.c:4814
ucma_process_join+0xa76/0xf60 drivers/infiniband/core/ucma.c:1479

CPU: 0 PID: 29874 Comm: syz-executor.3 Not tainted 5.16.0-rc3-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
=====================================================

[1] https://lore.kernel.org/linux-rdma/20220117183832.GD84788@nvidia.com/

Fixes: b5de0c60cc30 ("RDMA/cma: Fix use after free race in roce multicast join")
Reported-by: syzbot+8fcbb77276d43cc8b693@syzkaller.appspotmail.com
Signed-off-by: Mark Zhang <markzhang@nvidia.com>
Link: https://lore.kernel.org/r/58a4a98323b5e6b1282e83f6b76960d06e43b9fa.1679309909.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: rs9: Fix suspend/resume

[ Upstream commit 632e04739c8f45c2d9ca4d4c5bd18d80c2ac9296 ]

Disabling the cache in commit 2ff4ba9e3702 ("clk: rs9: Fix I2C accessors")
without removing cache synchronization in resume path results in a
kernel panic as map->cache_ops is unset, due to REGCACHE_NONE.
Enable flat cache again to support resume again. num_reg_defaults_raw
is necessary to read the cache defaults from hardware. Some registers
are strapped in hardware and cannot be provided in software.

Fixes: 2ff4ba9e3702 ("clk: rs9: Fix I2C accessors")
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Link: https://lore.kernel.org/r/20230310074940.3475703-1-alexander.stein@ew.tq-group.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/erdma: Defer probing if netdevice can not be found

[ Upstream commit 6bd1bca858f1734a75572a788213d1e1143f2f0a ]

ERDMA device may be probed before its associated netdevice, returning
-EPROBE_DEFER allows OS try to probe erdma device later.

Fixes: d55e6fb4803c ("RDMA/erdma: Add the erdma module")
Signed-off-by: Cheng Xu <chengyou@linux.alibaba.com>
Link: https://lore.kernel.org/r/20230320084652.16807-5-chengyou@linux.alibaba.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/erdma: Inline mtt entries into WQE if supported

[ Upstream commit 0dd83a4d7756713f81990d6c5547500f212a1190 ]

The max inline mtt count supported is ERDMA_MAX_INLINE_MTT_ENTRIES.
When mr->mem.mtt_nents == ERDMA_MAX_INLINE_MTT_ENTRIES, inline mtt
is also supported, fix it.

Fixes: 155055771704 ("RDMA/erdma: Add verbs implementation")
Signed-off-by: Cheng Xu <chengyou@linux.alibaba.com>
Link: https://lore.kernel.org/r/20230320084652.16807-4-chengyou@linux.alibaba.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/erdma: Update default EQ depth to 4096 and max_send_wr to 8192

[ Upstream commit 6256aa9ae955d10ec73a434533ca62034eff1b76 ]

Max EQ depth of hardware is 32K, the current default EQ depth is too small
for some applications, so change the default depth to 4096.
Max send WRs the hardware can support is 8K, but the driver limits the
value to 4K. Remove this limitation.

Fixes: be3cff0f242d ("RDMA/erdma: Add the hardware related definitions")
Fixes: db23ae64caac ("RDMA/erdma: Add verbs header file")
Signed-off-by: Cheng Xu <chengyou@linux.alibaba.com>
Link: https://lore.kernel.org/r/20230320084652.16807-3-chengyou@linux.alibaba.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

IB/mlx5: Add support for 400G_8X lane speed

[ Upstream commit 88c9483faf15ada14eca82714114656893063458 ]

Currently, when driver queries PTYS to report which link speed is being
used on its RoCE ports, it does not check the case of having 400Gbps
transmitted over 8 lanes. Thus it fails to report the said speed and
instead it defaults to report 10G over 4 lanes.

Add a check for the said speed when querying PTYS and report it back
correctly when needed.

Fixes: 08e8676f1607 ("IB/mlx5: Add support for 50Gbps per lane link modes")
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Reviewed-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/ec9040548d119d22557d6a4b4070d6f421701fd4.1678973994.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/irdma: Add ipv4 check to irdma_find_listener()

[ Upstream commit e4522c097ec10f23ea0933e9e69d4fa9d8ae9441 ]

Add ipv4 check to irdma_find_listener(). Otherwise the function
incorrectly finds and returns a listener with a different addr family for
the zero IP addr, if a listener with a zero IP addr and the same port as
the one searched for has already been created.

Fixes: 146b9756f14c ("RDMA/irdma: Add connection manager")
Signed-off-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Link: https://lore.kernel.org/r/20230315145231.931-5-shiraz.saleem@intel.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/irdma: Increase iWARP CM default rexmit count

[ Upstream commit 8385a875c9eecc429b2f72970efcbb0e5cb5b547 ]

When running perftest with large number of connections in iWARP mode, the
passive side could be slow to respond. Increase the rexmit counter default
to allow scaling connections.

Fixes: 146b9756f14c ("RDMA/irdma: Add connection manager")
Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Link: https://lore.kernel.org/r/20230315145231.931-4-shiraz.saleem@intel.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/irdma: Fix memory leak of PBLE objects

[ Upstream commit b69a6979dbaa2453675fe9c71bdc2497fedb11f9 ]

On rmmod of irdma, the PBLE object memory is not being freed. PBLE object
memory are not statically pre-allocated at function initialization time
unlike other HMC objects. PBLEs objects and the Segment Descriptors (SD)
for it can be dynamically allocated during scale up and SD's remain
allocated till function deinitialization.

Fix this leak by adding IRDMA_HMC_IW_PBLE to the iw_hmc_obj_types[] table
and skip pbles in irdma_create_hmc_obj but not in irdma_del_hmc_objects().

Fixes: 44d9e52977a1 ("RDMA/irdma: Implement device initialization definitions")
Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Link: https://lore.kernel.org/r/20230315145231.931-3-shiraz.saleem@intel.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/irdma: Do not generate SW completions for NOPs

[ Upstream commit 30ed9ee9a10a90ae719dcfcacead1d0506fa45ed ]

Currently, artificial SW completions are generated for NOP wqes which can
generate unexpected completions with wr_id = 0. Skip the generation of
artificial completions for NOPs.

Fixes: 81091d7696ae ("RDMA/irdma: Add SW mechanism to generate completions on error")
Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Link: https://lore.kernel.org/r/20230315145231.931-2-shiraz.saleem@intel.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: sprd: set max_register according to mapping range

[ Upstream commit 47d43086531f10539470a63e8ad92803e686a3dd ]

In sprd clock driver, regmap_config.max_register was set to a fixed value
which is likely larger than the address range configured in device tree,
when reading registers through debugfs it would cause access violation.

Fixes: d41f59fd92f2 ("clk: sprd: Add common infrastructure")
Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com>
Link: https://lore.kernel.org/r/20230316023624.758204-1-chunyan.zhang@unisoc.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/i915/dsi: fix DSS CTL register offsets for TGL+

commit 6b8446859c971a5783a2cdc90adf32e64de3bd23 upstream.

On TGL+ the DSS control registers are at different offsets, and there's
one per pipe. Fix the offsets to fix dual link DSI for TGL+.

There would be helpers for this in the DSC code, but just do the quick
fix now for DSI. Long term, we should probably move all the DSS handling
into intel_vdsc.c, so exporting the helpers seems counter-productive.

Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/8232
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230301151409.1581574-1-jani.nikula@intel.com
(cherry picked from commit 1a62dd9895dca78bee28bba3a36f08836fdd143d)
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fbcon: set_con2fb_map needs to set con2fb_map!

commit fffb0b52d5258554c645c966c6cbef7de50b851d upstream.

I got really badly confused in d443d9386472 ("fbcon: move more common
code into fb_open()") because we set the con2fb_map before the failure
points, which didn't look good.

But in trying to fix that I moved the assignment into the wrong path -
we need to do it for _all_ vc we take over, not just the first one
(which additionally requires the call to con2fb_acquire_newinfo).

I've figured this out because of a KASAN bug report, where the
fbcon_registered_fb and fbcon_display arrays went out of sync in
fbcon_mode_deleted() because the con2fb_map pointed at the old
fb_info, but the modes and everything was updated for the new one.

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Helge Deller <deller@gmx.de>
Tested-by: Xingyuan Mo <hdthky0@gmail.com>
Fixes: d443d9386472 ("fbcon: move more common code into fb_open()")
Reported-by: Xingyuan Mo <hdthky0@gmail.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Xingyuan Mo <hdthky0@gmail.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Helge Deller <deller@gmx.de>
Cc: <stable@vger.kernel.org> # v5.19+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fbcon: Fix error paths in set_con2fb_map

commit edf79dd2172233452ff142dcc98b19d955fc8974 upstream.

This is a regressoin introduced in b07db3958485 ("fbcon: Ditch error
handling for con2fb_release_oldinfo"). I failed to realize what the if
(!err) checks. The mentioned commit was dropping the
con2fb_release_oldinfo() return value but the if (!err) was also
checking whether the con2fb_acquire_newinfo() function call above
failed or not.

Fix this with an early return statement.

Note that there's still a difference compared to the orginal state of
the code, the below lines are now also skipped on error:

if (!search_fb_in_map(info_idx))
info_idx = newidx;

These are only needed when we've actually thrown out an old fb_info
from the console mappings, which only happens later on.

Also move the fbcon_add_cursor_work() call into the same if block,
it's all protected by console_lock so doesn't matter when we set up
the blinking cursor delayed work anyway. This further simplifies the
control flow and allows us to ditch the found local variable.

v2: Clarify commit message (Javier)

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Helge Deller <deller@gmx.de>
Tested-by: Xingyuan Mo <hdthky0@gmail.com>
Fixes: b07db3958485 ("fbcon: Ditch error handling for con2fb_release_oldinfo")
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Xingyuan Mo <hdthky0@gmail.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Helge Deller <deller@gmx.de>
Cc: <stable@vger.kernel.org> # v5.19+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: arm64: PMU: Restore the guest's EL0 event counting after migration

commit f9ea835e99bc8d049bf2a3ec8fa5a7cb4fcade23 upstream.

Currently, with VHE, KVM enables the EL0 event counting for the
guest on vcpu_load() or KVM enables it as a part of the PMU
register emulation process, when needed.  However, in the migration
case (with VHE), the same handling is lacking, as vPMU register
values that were restored by userspace haven't been propagated yet
(the PMU events haven't been created) at the vcpu load-time on the
first KVM_RUN (kvm_vcpu_pmu_restore_guest() called from vcpu_load()
on the first KVM_RUN won't do anything as events_{guest,host} of
kvm_pmu_events are still zero).

So, with VHE, enable the guest's EL0 event counting on the first
KVM_RUN (after the migration) when needed.  More specifically,
have kvm_pmu_handle_pmcr() call kvm_vcpu_pmu_restore_guest()
so that kvm_pmu_handle_pmcr() on the first KVM_RUN can take
care of it.

Fixes: d0c94c49792c ("KVM: arm64: Restore PMU configuration on first run")
Cc: stable@vger.kernel.org
Reviewed-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Reiji Watanabe <reijiw@google.com>
Link: https://lore.kernel.org/r/20230329023944.2488484-1-reijiw@google.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mtd: rawnand: stm32_fmc2: use timings.mode instead of checking tRC_min

commit ddbb664b6ab8de7dffa388ae0c88cd18616494e5 upstream.

Use timings.mode value instead of checking tRC_min timing
for EDO mode support.

Signed-off-by: Christophe Kerello <christophe.kerello@foss.st.com>
Fixes: 2cd457f328c1 ("mtd: rawnand: stm32_fmc2: add STM32 FMC2 NAND flash controller driver")
Cc: stable@vger.kernel.org #v5.10+
Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20230328155819.225521-3-christophe.kerello@foss.st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mtd: rawnand: stm32_fmc2: remove unsupported EDO mode

commit f71e0e329c152c7f11ddfd97ffc62aba152fad3f upstream.

Remove the EDO mode support from as the FMC2 controller does not
support the feature.

Signed-off-by: Christophe Kerello <christophe.kerello@foss.st.com>
Fixes: 2cd457f328c1 ("mtd: rawnand: stm32_fmc2: add STM32 FMC2 NAND flash controller driver")
Cc: stable@vger.kernel.org #v5.4+
Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20230328155819.225521-2-christophe.kerello@foss.st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mtd: rawnand: meson: fix bitmask for length in command word

commit 93942b70461574ca7fc3d91494ca89b16a4c64c7 upstream.

Valid mask is 0x3FFF, without this patch the following problems were
found:

1) [    0.938914] Could not find a valid ONFI parameter page, trying
                  bit-wise majority to recover it
   [    0.947384] ONFI parameter recovery failed, aborting

2) Read with disabled ECC mode was broken.

Fixes: 8fae856c5350 ("mtd: rawnand: meson: add support for Amlogic NAND flash controller")
Cc: <Stable@vger.kernel.org>
Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/3794ffbf-dfea-e96f-1f97-fe235b005e19@sberdevices.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mtdblock: tolerate corrected bit-flips

commit 0c3089601f064d80b3838eceb711fcac04bceaad upstream.

mtd_read() may return -EUCLEAN in case of corrected bit-flips.This
particular condition should not be treated like an error.

Signed-off-by: Bang Li <libang.linuxer@gmail.com>
Fixes: e47f68587b82 ("mtd: check for max_bitflips in mtd_read_oob()")
Cc: <stable@vger.kernel.org> # v3.7
Acked-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20230328163012.4264-1-libang.linuxer@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fbmem: Reject FB_ACTIVATE_KD_TEXT from userspace

commit 6fd33a3333c7916689b8f051a185defe4dd515b0 upstream.

This is an oversight from dc5bdb68b5b3 ("drm/fb-helper: Fix vt
restore") - I failed to realize that nasty userspace could set this.

It's not pretty to mix up kernel-internal and userspace uapi flags
like this, but since the entire fb_var_screeninfo structure is uapi
we'd need to either add a new parameter to the ->fb_set_par callback
and fb_set_par() function, which has a _lot_ of users. Or some other
fairly ugly side-channel int fb_info. Neither is a pretty prospect.

Instead just correct the issue at hand by filtering out this
kernel-internal flag in the ioctl handling code.

Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Fixes: dc5bdb68b5b3 ("drm/fb-helper: Fix vt restore")
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: shlomo@fastmail.com
Cc: Michel Dänzer <michel@daenzer.net>
Cc: Noralf Trønnes <noralf@tronnes.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v5.7+
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Nathan Chancellor <natechancellor@gmail.com>
Cc: Qiujun Huang <hqjagain@gmail.com>
Cc: Peter Rosin <peda@axentia.se>
Cc: linux-fbdev@vger.kernel.org
Cc: Helge Deller <deller@gmx.de>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Samuel Thibault <samuel.thibault@ens-lyon.org>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Shigeru Yoshida <syoshida@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230404193934.472457-1-daniel.vetter@ffwll.ch
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: fix fast csum implementation detection

commit 68d99ab0e9221ef54506f827576c5a914680eeaf upstream.

The BTRFS_FS_CSUM_IMPL_FAST flag is currently set whenever a non-generic
crc32c is detected, which is the incorrect check if the file system uses
a different checksumming algorithm.  Refactor the code to only check
this if crc32c is actually used.  Note that in an ideal world the
information if an algorithm is hardware accelerated or not should be
provided by the crypto API instead, but that's left for another day.

CC: stable@vger.kernel.org # 5.4.x: c8a5f8ca9a9c: btrfs: print checksum type and implementation at mount time
CC: stable@vger.kernel.org # 5.4.x
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: restore the thread_pool= behavior in remount for the end I/O workqueues

commit 40fac6472f22a59f5694496e179988ab4a1dfe07 upstream.

Commit d7b9416fe5c5 ("btrfs: remove btrfs_end_io_wq") converted the read
and I/O handling from btrfs_workqueues to Linux workqueues, and as part
of that lost the code to apply the thread_pool= based max_active limit
on remount.  Restore it.

Fixes: d7b9416fe5c5 ("btrfs: remove btrfs_end_io_wq")
CC: stable@vger.kernel.org # 6.0+
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Bluetooth: hci_conn: Fix possible UAF

commit 5dc7d23e167e2882ef118456ceccd57873e876d8 upstream.

This fixes the following trace:

==================================================================
BUG: KASAN: slab-use-after-free in hci_conn_del+0xba/0x3a0
Write of size 8 at addr ffff88800208e9c8 by task iso-tester/31

CPU: 0 PID: 31 Comm: iso-tester Not tainted 6.3.0-rc2-g991aa4a69a47
 #4716
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.1-2.fc36
04/01/2014
Call Trace:
 <TASK>
 dump_stack_lvl+0x1d/0x70
 print_report+0xce/0x610
 ? __virt_addr_valid+0xd4/0x150
 ? hci_conn_del+0xba/0x3a0
 kasan_report+0xdd/0x110
 ? hci_conn_del+0xba/0x3a0
 hci_conn_del+0xba/0x3a0
 hci_conn_hash_flush+0xf2/0x120
 hci_dev_close_sync+0x388/0x920
 hci_unregister_dev+0x122/0x260
 vhci_release+0x4f/0x90
 __fput+0x102/0x430
 task_work_run+0xf1/0x160
 ? __pfx_task_work_run+0x10/0x10
 ? mark_held_locks+0x24/0x90
 exit_to_user_mode_prepare+0x170/0x180
 syscall_exit_to_user_mode+0x19/0x50
 do_syscall_64+0x4e/0x90
 entry_SYSCALL_64_after_hwframe+0x70/0xda

Fixes: 0f00cd322d22 ("Bluetooth: Free potentially unfreed SCO connection")
Link: https://syzkaller.appspot.com/bug?extid=8bb72f86fc823817bc5d
Cc: <stable@vger.kernel.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Bluetooth: Free potentially unfreed SCO connection

commit 0f00cd322d22d4441de51aa80bcce5bb6a8cbb44 upstream.

It is possible to initiate a SCO connection while deleting the
corresponding ACL connection, e.g. in below scenario:

(1) < hci setup sync connect command
(2) > hci disconn complete event (for the acl connection)
(3) > hci command complete event (for(1), failure)

When it happens, hci_cs_setup_sync_conn won't be able to obtain the
reference to the SCO connection, so it will be stuck and potentially
hinder subsequent connections to the same device.

This patch prevents that by also deleting the SCO connection if it is
still not established when the corresponding ACL connection is deleted.

Signed-off-by: Archie Pusaka <apusaka@chromium.org>
Reviewed-by: Ying Hsu <yinghsu@chromium.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bluetooth: btbcm: Fix logic error in forming the board name.

commit b76abe4648c1acc791a207e7c08d1719eb9f4ea8 upstream.

This patch fixes an incorrect loop exit condition in code that replaces
'/' symbols in the board name. There might also be a memory corruption
issue here, but it is unlikely to be a real problem.

Cc: <stable@vger.kernel.org>
Signed-off-by: Sasha Finkelstein <fnkl.kernel@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Bluetooth: Fix race condition in hidp_session_thread

commit c95930abd687fcd1aa040dc4fe90dff947916460 upstream.

There is a potential race condition in hidp_session_thread that may
lead to use-after-free. For instance, the timer is active while
hidp_del_timer is called in hidp_session_thread(). After hidp_session_put,
then 'session' will be freed, causing kernel panic when hidp_idle_timeout
is running.

The solution is to use del_timer_sync instead of del_timer.

Here is the call trace:

? hidp_session_probe+0x780/0x780
call_timer_fn+0x2d/0x1e0
__run_timers.part.0+0x569/0x940
hidp_session_probe+0x780/0x780
call_timer_fn+0x1e0/0x1e0
ktime_get+0x5c/0xf0
lapic_next_deadline+0x2c/0x40
clockevents_program_event+0x205/0x320
run_timer_softirq+0xa9/0x1b0
__do_softirq+0x1b9/0x641
__irq_exit_rcu+0xdc/0x190
irq_exit_rcu+0xe/0x20
sysvec_apic_timer_interrupt+0xa1/0xc0

Cc: stable@vger.kernel.org
Signed-off-by: Min Li <lm0963hack@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Bluetooth: L2CAP: Fix use-after-free in l2cap_disconnect_{req,rsp}

commit a2a9339e1c9deb7e1e079e12e27a0265aea8421a upstream.

Similar to commit d0be8347c623 ("Bluetooth: L2CAP: Fix use-after-free
caused by l2cap_chan_put"), just use l2cap_chan_hold_unless_zero to
prevent referencing a channel that is about to be destroyed.

Cc: stable@kernel.org
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Min Li <lm0963hack@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/hdmi: disable KAE for Intel DG2

commit 6ab6f98fcdc9d4fbe245aa67de03542deea65322 upstream.

Use of keep-alive (KAE) has resulted in loss of audio on some A750/770
cards as the transition from keep-alive to stream playback is not
working as expected. As there is limited benefit of the new KAE mode
on discrete cards, revert back to older silent-stream implementation
on these systems.

Cc: stable@vger.kernel.org
Fixes: 15175a4f2bbb ("ALSA: hda/hdmi: add keep-alive support for ADL-P and DG2")
Link: https://gitlab.freedesktop.org/drm/intel/-/issues/8307
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20230413191153.3692049-1-kai.vehmanen@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/sigmatel: fix S/PDIF out on Intel D*45* motherboards

commit f342ac00da1064eb4f94b1f4bcacbdfea955797a upstream.

The BIOS botches this one completely - it says the 2nd S/PDIF output is
used, while in fact it's the 1st one. This is tested on DP45SG, but I'm
assuming it's valid for the other boards in the series as well.

Also add some comments regarding the pins.
FWIW, the codec is apparently still sold by Tempo Semiconductor, Inc.,
where one can download the documentation.

Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230405201220.2197826-2-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: emu10k1: don't create old pass-through playback device on Audigy

commit 8dd13214a810c695044aa168c0ddba1a9c433e4f upstream.

It could have never worked, as snd_emu10k1_fx8010_playback_prepare() and
snd_emu10k1_fx8010_playback_hw_free() assume the emu10k1 offset for the
ETRAM, and the default DSP code includes no handler for it. It also
wouldn't make a lot of sense to make it work, as Audigy has an own, much
simpler, pass-through mechanism. So just skip creation of the device.

Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230405201220.2197938-1-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: firewire-tascam: add missing unwind goto in snd_tscm_stream_start_duplex()

commit fb4a624f88f658c7b7ae124452bd42eaa8ac7168 upstream.

Smatch Warns:
sound/firewire/tascam/tascam-stream.c:493 snd_tscm_stream_start_duplex()
warn: missing unwind goto?

The direct return will cause the stream list of "&tscm->domain" unemptied
and the session in "tscm" unfinished if amdtp_domain_start() returns with
an error.

Fix this by changing the direct return to a goto which will empty the
stream list of "&tscm->domain" and finish the session in "tscm".

The snd_tscm_stream_start_duplex() function is called in the prepare
callback of PCM. According to "ALSA Kernel API Documentation", the prepare
callback of PCM will be called many times at each setup. So, if the
"&d->streams" list is not emptied, when the prepare callback is called
next time, snd_tscm_stream_start_duplex() will receive -EBUSY from
amdtp_domain_add_stream() that tries to add an existing stream to the
domain. The error handling code after the "error" label will be executed
in this case, and the "&d->streams" list will be emptied. So not emptying
the "&d->streams" list will not cause an issue. But it is more efficient
and readable to empty it on the first error by changing the direct return
to a goto statement.

The session in "tscm" has been begun before amdtp_domain_start(), so it
needs to be finished when amdtp_domain_start() fails.

Fixes: c281d46a51e3 ("ALSA: firewire-tascam: support AMDTP domain")
Signed-off-by: Xu Biang <xubiang@hust.edu.cn>
Reviewed-by: Dan Carpenter <error27@gmail.com>
Acked-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230406132801.105108-1-xubiang@hust.edu.cn
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek: Add quirks for Lenovo Z13/Z16 Gen2

commit 8eda19cd59cedbfe4ec11aea4bcecabe4c98e9e4 upstream.

These Lenovo laptops use Realtek HDA codec combined with
2xCS35L41 Amplifiers using I2C with External Boost.

Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230412160531.182007-1-sbinding@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda: patch_realtek: add quirk for Asus N7601ZM

commit e959f2beec8e655dba79c5a7111beedae5e757e0 upstream.

Add pins and verbs needed to enable speakers and jack.

The pins and verbs configurations were identified by snooping the
Windows driver commands, with a nice write-up here:
https://brakkee.org/site/2023/02/07/fixing-sound-on-the-asus-n7601zm/

Reported-by: Erik Brakkee <erik@brakkee.org>
Link: https://github.com/thesofproject/linux/issues/4176
Tested-by: Erik Brakkee <erik@brakkee.org>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230406152725.15191-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: i2c/cs8427: fix iec958 mixer control deactivation

commit e98e7a82bca2b6dce3e03719cff800ec913f9af7 upstream.

snd_cs8427_iec958_active() would always delete
SNDRV_CTL_ELEM_ACCESS_INACTIVE, even though the function has an
argument `active`.

Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230405201219.2197811-1-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/sigmatel: add pin overrides for Intel DP45SG motherboard

commit c17f8fd31700392b1bb9e7b66924333568cb3700 upstream.

Like the other boards from the D*45* series, this one sets up the
outputs not quite correctly.

Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230405201220.2197826-1-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: emu10k1: fix capture interrupt handler unlinking

commit b09c551c77c7e01dc6e4f3c8bf06b5ffa7b06db5 upstream.

Due to two copy/pastos, closing the MIC or EFX capture device would
make a running ADC capture hang due to unsetting its interrupt handler.
In principle, this would have also allowed dereferencing dangling
pointers, but we're actually rather thorough at disabling and flushing
the ints.

While it may sound like one, this actually wasn't a hypothetical bug:
PortAudio will open a capture stream at startup (and close it right
away) even if not asked to. If the first device is busy, it will just
proceed with the next one ... thus killing a concurrent capture.

Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230405201220.2197923-1-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amd/display: Pass the right info to drm_dp_remove_payload

commit b8ca445f550a9a079134f836466ddda3bfad6108 upstream.

[Why & How]
drm_dp_remove_payload() interface was changed. Correct amdgpu dm code
to pass the right parameter to the drm helper function.

Reviewed-by: Jerry Zuo <Jerry.Zuo@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry-picked from b8ca445f550a9a079134f836466ddda3bfad6108)
[Hand modified due to missing f0127cb11299df80df45583b216e13f27c408545 which
 failed to apply due to missing 94dfeaa46925bb6b4d43645bbb6234e846dec257]
Reported-and-tested-by: Veronika Schwan <veronika@pisquaredover6.de>
Fixes: d7b5638bd337 ("drm/amd/display: Take FEC Overhead into Timeslot Calculation")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "pinctrl: amd: Disable and mask interrupts on resume"

commit 534e465845ebfb4a97eb5459d3931a0b35e3b9a5 upstream.

This reverts commit b26cd9325be4c1fcd331b77f10acb627c560d4d7.

This patch introduces a regression on Lenovo Z13, which can't wake
from the lid with it applied; and some unspecified AMD based Dell
platforms are unable to wake from hitting the power button

Signed-off-by: Kornel Dulęba <korneld@chromium.org>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20230411134932.292287-1-korneld@chromium.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 6.1.24

Link: https://lore.kernel.org/r/20230412082836.695875037@linuxfoundation.org
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Tested-by: Markus Reichelt <lkt+2023@mareichelt.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>
Tested-by: Slade Watkins <srw@sladewatkins.net =
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Ron Economos <re@w6rz.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bpftool: Print newline before '}' for struct with padding only fields

[ Upstream commit 44a726c3f23cf762ef4ce3c1709aefbcbe97f62c ]

btf_dump_emit_struct_def attempts to print empty structures at a
single line, e.g. `struct empty {}`. However, it has to account for a
case when there are no regular but some padding fields in the struct.
In such case `vlen` would be zero, but size would be non-zero.

E.g. here is struct bpf_timer from vmlinux.h before this patch:

 struct bpf_timer {
  long: 64;
long: 64;};

And after this patch:

 struct bpf_dynptr {
  long: 64;
long: 64;
 };

Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20221001104425.415768-1-eddyz87@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

mm: enable maple tree RCU mode by default.

commit 3dd4432549415f3c65dd52d5c687629efbf4ece1 upstream.

Use the maple tree in RCU mode for VMA tracking.

The maple tree tracks the stack and is able to update the pivot
(lower/upper boundary) in-place to allow the page fault handler to write
to the tree while holding just the mmap read lock.  This is safe as the
writes to the stack have a guard VMA which ensures there will always be
a NULL in the direction of the growth and thus will only update a pivot.

It is possible, but not recommended, to have VMAs that grow up/down
without guard VMAs.  syzbot has constructed a testcase which sets up a
VMA to grow and consume the empty space.  Overwriting the entire NULL
entry causes the tree to be altered in a way that is not safe for
concurrent readers; the readers may see a node being rewritten or one
that does not match the maple state they are using.

Enabling RCU mode allows the concurrent readers to see a stable node and
will return the expected result.

Link: https://lkml.kernel.org/r/20230227173632.3292573-9-surenb@google.com
Cc: stable@vger.kernel.org
Fixes: d4af56c5c7c6 ("mm: start tracking VMAs with maple tree")
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reported-by: syzbot+8d95422d3537159ca390@syzkaller.appspotmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

maple_tree: add RCU lock checking to rcu callback functions

commit 790e1fa86b340c2bd4a327e01c161f7a1ad885f6 upstream.

Dereferencing RCU objects within the RCU callback without the RCU check
has caused lockdep to complain.  Fix the RCU dereferencing by using the
RCU callback lock to ensure the operation is safe.

Also stop creating a new lock to use for dereferencing during destruction
of the tree or subtree.  Instead, pass through a pointer to the tree that
has the lock that is held for RCU dereferencing checking.  It also does
not make sense to use the maple state in the freeing scenario as the tree
walk is a special case where the tree no longer has the normal encodings
and parent pointers.

Link: https://lkml.kernel.org/r/20230227173632.3292573-8-surenb@google.com
Fixes: 54a611b60590 ("Maple Tree: add new data structure")
Cc: stable@vger.kernel.org
Reported-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

maple_tree: add smp_rmb() to dead node detection

commit 0a2b18d948838e16912b3b627b504ab062b7d02a upstream.

Add an smp_rmb() before reading the parent pointer to ensure that anything
read from the node prior to the parent pointer hasn't been reordered ahead
of this check.

The is necessary for RCU mode.

Link: https://lkml.kernel.org/r/20230227173632.3292573-7-surenb@google.com
Fixes: 54a611b60590 ("Maple Tree: add new data structure")
Cc: stable@vger.kernel.org
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

maple_tree: remove extra smp_wmb() from mas_dead_leaves()

commit 8372f4d83f96f35915106093cde4565836587123 upstream.

The call to mte_set_dead_node() before the smp_wmb() already calls
smp_wmb() so this is not needed.  This is an optimization for the RCU mode
of the maple tree.

Link: https://lkml.kernel.org/r/20230227173632.3292573-5-surenb@google.com
Fixes: 54a611b60590 ("Maple Tree: add new data structure")
Cc: stable@vger.kernel.org
Signed-off-by: Liam Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

maple_tree: fix freeing of nodes in rcu mode

commit 2e5b4921f8efc9e845f4f04741797d16f36847eb upstream.

The walk to destroy the nodes was not always setting the node type and
would result in a destroy method potentially using the values as nodes.
Avoid this by setting the correct node types.  This is necessary for the
RCU mode of the maple tree.

Link: https://lkml.kernel.org/r/20230227173632.3292573-4-surenb@google.com
Cc: <Stable@vger.kernel.org>
Fixes: 54a611b60590 ("Maple Tree: add new data structure")
Signed-off-by: Liam Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

maple_tree: detect dead nodes in mas_start()

commit a7b92d59c885018cb7bb88539892278e4fd64b29 upstream.

When initially starting a search, the root node may already be in the
process of being replaced in RCU mode.  Detect and restart the walk if
this is the case.  This is necessary for RCU mode of the maple tree.

Link: https://lkml.kernel.org/r/20230227173632.3292573-3-surenb@google.com
Cc: <Stable@vger.kernel.org>
Fixes: 54a611b60590 ("Maple Tree: add new data structure")
Signed-off-by: Liam Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

maple_tree: refine ma_state init from mas_start()

commit 46b345848261009477552d654cb2f65000c30e4d upstream.

If mas->node is an MAS_START, there are three cases, and they all assign
different values to mas->node and mas->offset.  So there is no need to set
them to a default value before updating.

Update them directly to make them easier to understand and for better
readability.

Link: https://lkml.kernel.org/r/20221221060058.609003-7-vernon2gm@gmail.com
Cc: <Stable@vger.kernel.org>
Fixes: 54a611b60590 ("Maple Tree: add new data structure")
Signed-off-by: Vernon Yang <vernon2gm@gmail.com>
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

maple_tree: be more cautious about dead nodes

commit 39d0bd86c499ecd6abae42a9b7112056c5560691 upstream.

ma_pivots() and ma_data_end() may be called with a dead node.  Ensure to
that the node isn't dead before using the returned values.

This is necessary for RCU mode of the maple tree.

Link: https://lkml.kernel.org/r/20230227173632.3292573-1-surenb@google.com
Link: https://lkml.kernel.org/r/20230227173632.3292573-2-surenb@google.com
Fixes: 54a611b60590 ("Maple Tree: add new data structure")
Cc: <Stable@vger.kernel.org>
Signed-off-by: Liam Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

maple_tree: fix mas_prev() and mas_find() state handling

commit 17dc622c7b0f94e49bed030726df4db12ecaa6b5 upstream.

When mas_prev() does not find anything, set the state to MAS_NONE.

Handle the MAS_NONE in mas_find() like a MAS_START.

Link: https://lkml.kernel.org/r/20230120162650.984577-7-Liam.Howlett@oracle.com
Cc: <Stable@vger.kernel.org>
Fixes: 54a611b60590 ("Maple Tree: add new data structure")
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reported-by: <syzbot+502859d610c661e56545@syzkaller.appspotmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

maple_tree: fix handle of invalidated state in mas_wr_store_setup()

commit 1202700c3f8cc5f7e4646c3cf05ee6f7c8bc6ccf upstream.

If an invalidated maple state is encountered during write, reset the maple
state to MAS_START.  This will result in a re-walk of the tree to the
correct location for the write.

Link: https://lore.kernel.org/all/20230107020126.1627-1-sj@kernel.org/
Link: https://lkml.kernel.org/r/20230120162650.984577-6-Liam.Howlett@oracle.com
Cc: <Stable@vger.kernel.org>
Fixes: 54a611b60590 ("Maple Tree: add new data structure")
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reported-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

maple_tree: reduce user error potential

commit 50e81c82ad947045c7ed26ddc9acb17276b653b6 upstream.

When iterating, a user may operate on the tree and cause the maple state
to be altered and left in an unintuitive state.  Detect this scenario and
correct it by setting to the limit and invalidating the state.

Link: https://lkml.kernel.org/r/20230120162650.984577-4-Liam.Howlett@oracle.com
Cc: <Stable@vger.kernel.org>
Fixes: 54a611b60590 ("Maple Tree: add new data structure")
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

maple_tree: fix potential rcu issue

commit 65be6f058b0eba98dc6c6f197ea9f62c9b6a519f upstream.

Ensure the node isn't dead after reading the node end.

Link: https://lkml.kernel.org/r/20230120162650.984577-3-Liam.Howlett@oracle.com
Cc: <Stable@vger.kernel.org>
Fixes: 54a611b60590 ("Maple Tree: add new data structure")
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

maple_tree: remove GFP_ZERO from kmem_cache_alloc() and kmem_cache_alloc_bulk()

commit 541e06b772c1aaffb3b6a245ccface36d7107af2 upstream.

Preallocations are common in the VMA code to avoid allocating under
certain locking conditions.  The preallocations must also cover the
worst-case scenario.  Removing the GFP_ZERO flag from the
kmem_cache_alloc() (and bulk variant) calls will reduce the amount of time
spent zeroing memory that may not be used.  Only zero out the necessary
area to keep track of the allocations in the maple state.  Zero the entire
node prior to using it in the tree.

This required internal changes to node counting on allocation, so the test
code is also updated.

This restores some micro-benchmark performance: up to +9% in mmtests mmap1
by my testing +10% to +20% in mmap, mmapaddr, mmapmany tests reported by
Red Hat

Link: https://bugzilla.redhat.com/show_bug.cgi?id=2149636
Link: https://lkml.kernel.org/r/20230105160427.2988454-1-Liam.Howlett@oracle.com
Cc: stable@vger.kernel.org
Fixes: 54a611b60590 ("Maple Tree: add new data structure")
Signed-off-by: Liam Howlett <Liam.Howlett@oracle.com>
Reported-by: Jirka Hladky <jhladky@redhat.com>
Suggested-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>