net/tg3: fix race condition in tg3_reset_task()

[ Upstream commit 16b55b1f2269962fb6b5154b8bf43f37c9a96637 ]

When an EEH error is encountered by a PCI adapter, the EEH driver
modifies the PCI channel's state as shown below:

   enum {
      /* I/O channel is in normal state */
      pci_channel_io_normal = (__force pci_channel_state_t) 1,

      /* I/O to channel is blocked */
      pci_channel_io_frozen = (__force pci_channel_state_t) 2,

      /* PCI card is dead */
      pci_channel_io_perm_failure = (__force pci_channel_state_t) 3,
   };

If the same EEH error then causes the tg3 driver's transmit timeout
logic to execute, the tg3_tx_timeout() function schedules a reset
task via tg3_reset_task_schedule(), which may cause a race condition
between the tg3 and EEH driver as both attempt to recover the HW via
a reset action.

EEH driver gets error event
--> eeh_set_channel_state()
    and set device to one of
    error state above           scheduler: tg3_reset_task() get
                                returned error from tg3_init_hw()
                             --> dev_close() shuts down the interface
tg3_io_slot_reset() and
tg3_io_resume() fail to
reset/resume the device

To resolve this issue, we avoid the race condition by checking the PCI
channel state in the tg3_reset_task() function and skip the tg3 driver
initiated reset when the PCI channel is not in the normal state.  (The
driver has no access to tg3 device registers at this point and cannot
even complete the reset task successfully without external assistance.)
We'll leave the reset procedure to be managed by the EEH driver which
calls the tg3_io_error_detected(), tg3_io_slot_reset() and
tg3_io_resume() functions as appropriate.

Adding the same checking in tg3_dump_state() to avoid dumping all
device registers when the PCI channel is not in the normal state.

Signed-off-by: Thinh Tran <thinhtr@linux.vnet.ibm.com>
Tested-by: Venkata Sai Duggi <venkata.sai.duggi@ibm.com>
Reviewed-by: David Christensen <drc@linux.vnet.ibm.com>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20231201001911.656-1-thinhtr@linux.vnet.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pds_vdpa: set features order

[ Upstream commit cefc9ba6aed48a3aa085888e3262ac2aa975714b ]

Fix up the order that the device and negotiated features
are checked to get a more reliable difference when things
get changed.

Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Message-Id: <20231110221802.46841-4-shannon.nelson@amd.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pds_vdpa: clear config callback when status goes to 0

[ Upstream commit dd3b8de16e90c5594eddd29aeeb99e97c6f863be ]

If the client driver is setting status to 0, something is
getting shutdown and possibly removed.  Make sure we clear
the config_cb so that it doesn't end up crashing when
trying to call a bogus callback.

Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Message-Id: <20231110221802.46841-3-shannon.nelson@amd.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pds_vdpa: fix up format-truncation complaint

[ Upstream commit 4f317d6529d7fc3ab7769ef89645d43fc7eec61b ]

Our friendly kernel test robot has recently been pointing out
some format-truncation issues.  Here's a fix for one of them.

Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202311040109.RfgJoE7L-lkp@intel.com/
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Message-Id: <20231110221802.46841-2-shannon.nelson@amd.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: SOF: ipc4-topology: Correct data structures for the GAIN module

[ Upstream commit e238b68e6dc89ddab52bd98216fe5623e94792b1 ]

Move the base_cfg to struct sof_ipc4_gain_data. This struct
describes the message payload passed to the firmware via the mailbox.

It is not wise to be 'clever' and try to use the first part of a struct
as IPC message without marking the message section as packed and aligned.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20231129131411.27516-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: SOF: ipc4-topology: Correct data structures for the SRC module

[ Upstream commit c447636970e3409ac39f0bb8c2dcff6b726f36b0 ]

Separate the IPC message part as struct sof_ipc4_src_data. This struct
describes the message payload passed to the firmware via the mailbox.

It is not wise to be 'clever' and try to use the first part of a struct
as IPC message without marking the message section as packed and aligned.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20231129131411.27516-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: hdac_hda: Conditionally register dais for HDMI and Analog

[ Upstream commit a0575b4add21a243cc3257e75ad913cd5377d5f2 ]

The current driver is registering the same dais for each hdev found in the
system which results duplicated widgets to be registered and the kernel
log contains similar prints:
snd_hda_codec_realtek ehdaudio0D0: ASoC: sink widget AIF1TX overwritten
snd_hda_codec_realtek ehdaudio0D0: ASoC: source widget AIF1RX overwritten
skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: sink widget hifi3 overwritten
skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: sink widget hifi2 overwritten
skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: sink widget hifi1 overwritten
skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: source widget Codec Output Pin1 overwritten
skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: sink widget Codec Input Pin1 overwritten
skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: sink widget Analog Codec Playback overwritten
skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: sink widget Digital Codec Playback overwritten
skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: sink widget Alt Analog Codec Playback overwritten
skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: source widget Analog Codec Capture overwritten
skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: source widget Digital Codec Capture overwritten
skl_hda_dsp_generic skl_hda_dsp_generic: ASoC: source widget Alt Analog Codec Capture overwritten

To avoid such issue, split the dai array into HDMI and non HDMI array and
register them conditionally:
for HDMI hdev only register the dais needed for HDMI
for non HDMI hdev do not  register the HDMI dais.

Depends-on: 3d1dc8b1030d ("ASoC: Intel: skl_hda_dsp_generic: Drop HDMI routes when HDMI is not available")
Link: https://github.com/thesofproject/linux/issues/4509
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20231128123914.3986-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: amd: yc: Add DMI entry to support System76 Pangolin 13

[ Upstream commit 19650c0f402f53abe48a55a1c49c8ed9576a088c ]

Add pang13 quirk to enable the internal microphone.

Signed-off-by: Jeremy Soller <jeremy@system76.com>
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Link: https://lore.kernel.org/r/20231127184237.32077-2-tcrawford@system76.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nouveau/tu102: flush all pdbs on vmm flush

[ Upstream commit cb9c919364653eeafb49e7ff5cd32f1ad64063ac ]

This is a hack around a bug exposed with the GSP code, I'm not sure
what is happening exactly, but it appears some of our flushes don't
result in proper tlb invalidation for out BAR2 and we get a BAR2
fault from GSP and it all dies.

Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231130010852.4034774-1-airlied@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: SOF: sof-audio: Modify logic for enabling/disabling topology cores

[ Upstream commit 31ed8da1c8e5e504710bb36863700e3389f8fc81 ]

In the current code, we enable a widget core when it is set up and
disable it when it is freed. This is problematic with IPC4 because
widget free is essentially a NOP and all widgets are freed in the
firmware when the pipeline is deleted. This results in a crash during
pipeline deletion when one of it's widgets is scheduled to run on a
secondary core and is powered off when widget is freed. So, change the
logic to enable all cores needed by all the modules in a pipeline when
the pipeline widget is set up and disable them after the pipeline
widget is freed.

Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20231124135743.24674-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: SOF: ipc4-topology: Add core_mask in struct snd_sof_pipeline

[ Upstream commit 0376b995bb7a65fb0c056f3adc5e9695ad0c1805 ]

With IPC4, a pipeline may contain multiple modules in the data
processing domain and they can be scheduled to run on different cores.
Add a new field in struct snd_sof_pipeline to keep track of all the
cores that are associated with the modules in the pipeline. Set the
pipeline core mask for IPC3 when initializing the pipeline widget IPC
structure. For IPC4, set the core mark when initializing the pipeline
widget and initializing processing modules in the data processing domain.

Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20231124135743.24674-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: Intel: skl_hda_dsp_generic: Drop HDMI routes when HDMI is not available

[ Upstream commit 3d1dc8b1030df8ca0fdfd4905c88ee10db943bf8 ]

When the HDMI is not present due to disabled display support
we will use dummy codec and the HDMI routes will refer to non existent
DAPM widgets.

Trim the route list from the HDMI routes to be able to probe the card even
if the HDMI dais are not registered.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231124124015.15878-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: fsl_xcvr: refine the requested phy clock frequency

[ Upstream commit 347ecf29a68cc8958fbcbd26ef410d07fe9d82f4 ]

As the input phy clock frequency will divided by 2 by default
on i.MX8MP with the implementation of clk-imx8mp-audiomix driver,
So the requested frequency need to be updated.

The relation of phy clock is:
    sai_pll_ref_sel
       sai_pll
          sai_pll_bypass
             sai_pll_out
                sai_pll_out_div2
                   earc_phy_cg

Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Link: https://lore.kernel.org/r/1700702093-8008-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: rt5650: add mutex to avoid the jack detection failure

[ Upstream commit cdba4301adda7c60a2064bf808e48fccd352aaa9 ]

This patch adds the jd_mutex to protect the jack detection control flow.
And only the headset type could check the button status.

Signed-off-by: Shuming Fan <shumingf@realtek.com>
Link: https://lore.kernel.org/r/20231122100123.2831753-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: fsl_xcvr: Enable 2 * TX bit clock for spdif only case

[ Upstream commit c33fd110424dfcb544cf55a1b312f43fe1918235 ]

The bit 10 in TX_DPTH_CTRL register controls the TX clock rate.
If this bit is set, TX datapath clock should be = 2* TX bit rate.
If this bit is not set, TX datapath clock should be 10* TX bit rate.

As the spdif only case, we always use 2 * TX bit clock, so
this bit need to be set.

Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1700617373-6472-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: cs43130: Fix incorrect frame delay configuration

[ Upstream commit aa7e8e5e4011571022dc06e4d7a2f108feb53d1a ]

Signed-off-by: Maciej Strozek <mstrozek@opensource.cirrus.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20231117141344.64320-3-mstrozek@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: cs43130: Fix the position of const qualifier

[ Upstream commit e7f289a59e76a5890a57bc27b198f69f175f75d9 ]

Signed-off-by: Maciej Strozek <mstrozek@opensource.cirrus.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20231117141344.64320-2-mstrozek@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: Intel: Skylake: mem leak in skl register function

[ Upstream commit f8ba14b780273fd290ddf7ee0d7d7decb44cc365 ]

skl_platform_register() uses krealloc. When krealloc is fail,
then previous memory is not freed. The leak is also when soc
component registration failed.

Signed-off-by: Kamil Duljas <kamil.duljas@gmail.com>
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20231116224112.2209-2-kamil.duljas@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: SOF: topology: Fix mem leak in sof_dai_load()

[ Upstream commit 31e721fbd194d5723722eaa21df1d14cee7e12b5 ]

The function has multiple return points at which it is not released
previously allocated memory.

Signed-off-by: Kamil Duljas <kamil.duljas@gmail.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20231116213926.2034-2-kamil.duljas@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: nau8822: Fix incorrect type in assignment and cast to restricted __be16

[ Upstream commit c1501f2597dd08601acd42256a4b0a0fc36bf302 ]

This issue is reproduced when W=1 build in compiler gcc-12.
The following are sparse warnings:

sound/soc/codecs/nau8822.c:199:25: sparse: sparse: incorrect type in assignment
sound/soc/codecs/nau8822.c:199:25: sparse: expected unsigned short
sound/soc/codecs/nau8822.c:199:25: sparse: got restricted __be16
sound/soc/codecs/nau8822.c:235:25: sparse: sparse: cast to restricted __be16
sound/soc/codecs/nau8822.c:235:25: sparse: sparse: cast to restricted __be16
sound/soc/codecs/nau8822.c:235:25: sparse: sparse: cast to restricted __be16
sound/soc/codecs/nau8822.c:235:25: sparse: sparse: cast to restricted __be16

Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202311122320.T1opZVkP-lkp@intel.com/
Signed-off-by: David Lin <CTLIN0@nuvoton.com>
Link: https://lore.kernel.org/r/20231117043011.1747594-1-CTLIN0@nuvoton.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: Intel: Skylake: Fix mem leak in few functions

[ Upstream commit d5c65be34df73fa01ed05611aafb73b440d89e29 ]

The resources should be freed when function return error.

Signed-off-by: Kamil Duljas <kamil.duljas@gmail.com>
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20231116125150.1436-1-kamil.duljas@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: rockchip: fix rk356x pcie msg interrupt name

[ Upstream commit 3cee9c635f27d1003d46f624d816f3455698b625 ]

The expected name by the binding at this position is "msg" and the SoC's
manual also calls the interrupt in question "msg", so fix the rk356x dtsi
to use the correct name.

Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20231114153834.934978-1-heiko@sntech.de
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: wm8974: Correct boost mixer inputs

[ Upstream commit 37e6fd0cebf0b9f71afb38fd95b10408799d1f0b ]

Bit 6 of INPPGA (INPPGAMUTE) does not control the Aux path, it controls
the input PGA path, as can been seen from Figure 8 Input Boost Stage in
the datasheet. Update the naming of things in the driver to match this
and update the routing to also reflect this.

Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20231113155916.1741027-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: amd: yc: Add HP 255 G10 into quirk table

[ Upstream commit 0c6498a59fbbcbf3d0a58c282dd6f0bca0eed92a ]

HP 255 G10's internal microphone array can be made
to work by adding it to the quirk table.

Signed-off-by: Matus Malych <matus@malych.org>
Link: https://lore.kernel.org/r/20231112165403.3221-1-matus@malych.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

hwtracing: hisi_ptt: Don't try to attach a task

[ Upstream commit aff787f64ad7cbb54614b51b82c682fe06411ef3 ]

PTT is an uncore PMU and shouldn't be attached to any task. Block
the usage in pmu::event_init().

Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20231010084731.30450-5-yangyicong@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

hwtracing: hisi_ptt: Handle the interrupt in hardirq context

[ Upstream commit e0dd27ad8af00f147ac3c9de88e0687986afc3ea ]

Handle the trace interrupt in the hardirq context, make sure the irq
core won't threaded it by declaring IRQF_NO_THREAD and userspace won't
balance it by declaring IRQF_NOBALANCING. Otherwise we may violate the
synchronization requirements of the perf core, referenced to the
change of arm-ccn PMU
  commit 0811ef7e2f54 ("bus: arm-ccn: fix PMU interrupt flags").

In the interrupt handler we mainly doing 2 things:
- Copy the data from the local DMA buffer to the AUX buffer
- Commit the data in the AUX buffer

Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
[ Fixed commit description to suppress checkpatch warning ]
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20231010084731.30450-3-yangyicong@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

nvme-core: check for too small lba shift

[ Upstream commit 74fbc88e161424b3b96a22b23a8e3e1edab9d05c ]

The block layer doesn't support logical block sizes smaller than 512
bytes. The nvme spec doesn't support that small either, but the driver
isn't checking to make sure the device responded with usable data.
Failing to catch this will result in a kernel bug, either from a
division by zero when stacking, or a zero length bio.

Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

blk-mq: don't count completed flush data request as inflight in case of quiesce

[ Upstream commit 0e4237ae8d159e3d28f3cd83146a46f576ffb586 ]

Request queue quiesce may interrupt flush sequence, and the original request
may have been marked as COMPLETE, but can't get finished because of
queue quiesce.

This way is fine from driver viewpoint, because flush sequence is block
layer concept, and it isn't related with driver.

However, driver(such as dm-rq) can call blk_mq_queue_inflight() to count &
drain inflight requests, then the wait & drain never gets done because
the completed & not-finished flush request is counted as inflight.

Fix this issue by not counting completed flush data request as inflight in
case of quiesce.

Cc: Mike Snitzer <snitzer@kernel.org>
Cc: David Jeffery <djeffery@redhat.com>
Cc: John Pittman <jpittman@redhat.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20231201085605.577730-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Revert "drm/prime: Unexport helpers for fd/handle conversion"

[ Upstream commit 0514f63cfff38a0dcb7ba9c5f245827edc0c5107 ]

This reverts commit 71a7974ac7019afeec105a54447ae1dc7216cbb3.

These helper functions are needed for KFD to export and import DMABufs
the right way without duplicating the tracking of DMABufs associated with
GEM objects while ensuring that move notifier callbacks are working as
intended.

CC: Christian König <christian.koenig@amd.com>
CC: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

smb: client, common: fix fortify warnings

[ Upstream commit 0015eb6e12384ff1c589928e84deac2ad1ceb236 ]

When compiling with gcc version 14.0.0 20231126 (experimental)
and CONFIG_FORTIFY_SOURCE=y, I've noticed the following:

In file included from ./include/linux/string.h:295,
                 from ./include/linux/bitmap.h:12,
                 from ./include/linux/cpumask.h:12,
                 from ./arch/x86/include/asm/paravirt.h:17,
                 from ./arch/x86/include/asm/cpuid.h:62,
                 from ./arch/x86/include/asm/processor.h:19,
                 from ./arch/x86/include/asm/cpufeature.h:5,
                 from ./arch/x86/include/asm/thread_info.h:53,
                 from ./include/linux/thread_info.h:60,
                 from ./arch/x86/include/asm/preempt.h:9,
                 from ./include/linux/preempt.h:79,
                 from ./include/linux/spinlock.h:56,
                 from ./include/linux/wait.h:9,
                 from ./include/linux/wait_bit.h:8,
                 from ./include/linux/fs.h:6,
                 from fs/smb/client/smb2pdu.c:18:
In function 'fortify_memcpy_chk',
    inlined from '__SMB2_close' at fs/smb/client/smb2pdu.c:3480:4:
./include/linux/fortify-string.h:588:25: warning: call to '__read_overflow2_field'
declared with attribute warning: detected read beyond size of field (2nd parameter);
maybe use struct_group()? [-Wattribute-warning]
  588 |                         __read_overflow2_field(q_size_field, size);
      |                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

and:

In file included from ./include/linux/string.h:295,
                 from ./include/linux/bitmap.h:12,
                 from ./include/linux/cpumask.h:12,
                 from ./arch/x86/include/asm/paravirt.h:17,
                 from ./arch/x86/include/asm/cpuid.h:62,
                 from ./arch/x86/include/asm/processor.h:19,
                 from ./arch/x86/include/asm/cpufeature.h:5,
                 from ./arch/x86/include/asm/thread_info.h:53,
                 from ./include/linux/thread_info.h:60,
                 from ./arch/x86/include/asm/preempt.h:9,
                 from ./include/linux/preempt.h:79,
                 from ./include/linux/spinlock.h:56,
                 from ./include/linux/wait.h:9,
                 from ./include/linux/wait_bit.h:8,
                 from ./include/linux/fs.h:6,
                 from fs/smb/client/cifssmb.c:17:
In function 'fortify_memcpy_chk',
    inlined from 'CIFS_open' at fs/smb/client/cifssmb.c:1248:3:
./include/linux/fortify-string.h:588:25: warning: call to '__read_overflow2_field'
declared with attribute warning: detected read beyond size of field (2nd parameter);
maybe use struct_group()? [-Wattribute-warning]
  588 |                         __read_overflow2_field(q_size_field, size);
      |                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

In both cases, the fortification logic inteprets calls to 'memcpy()' as an
attempts to copy an amount of data which exceeds the size of the specified
field (i.e. more than 8 bytes from __le64 value) and thus issues an overread
warning. Both of these warnings may be silenced by using the convenient
'struct_group()' quirk.

Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdgpu: Use another offset for GC 9.4.3 remap

[ Upstream commit ed6e4f0a27ebafffbd12bf3878ab004787685d8a ]

The legacy region at 0x7F000 maps to valid registers in GC 9.4.3 SOCs.
Use 0x1A000 offset instead as MMIO register remap region.

Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdkfd: Free gang_ctx_bo and wptr_bo in pqm_uninit

[ Upstream commit 72838777aa38352e20301e123b97110c456cd38e ]

[Why]
Memory leaks of gang_ctx_bo and wptr_bo.

[How]
Free gang_ctx_bo and wptr_bo in pqm_uninit.

v2: add a common function pqm_clean_queue_resource to
free queue's resources.
v3: reset pdd->pqd.num_gws when destorying GWS queue.

Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: ZhenGuo Yin <zhenguo.yin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdgpu: Fix cat debugfs amdgpu_regs_didt causes kernel null pointer

[ Upstream commit 2161e09cd05a50d80736fe397145340d2e8f6c05 ]

For 'AMDGPU_FAMILY_SI' family cards, in 'si_common_early_init' func, init
'didt_rreg' and 'didt_wreg' to 'NULL'. But in func
'amdgpu_debugfs_regs_didt_read/write', using 'RREG32_DIDT' 'WREG32_DIDT'
lacks of relevant judgment. And other 'amdgpu_ip_block_version' that use
these two definitions won't be added for 'AMDGPU_FAMILY_SI'.

So, add null pointer judgment before calling.

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Lu Yao <yaolu@kylinos.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/display: update dcn315 lpddr pstate latency

[ Upstream commit c92da0403d373c03ea5c65c0260c7db6762013b0 ]

[WHY/HOW]
Increase the pstate latency to improve ac/dc transition

Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Dmytro Laktyushkin <dmytro.laktyushkin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdkfd: Use common function for IP version check

[ Upstream commit 2f86bf79b63dbe6963ebc647b77a5f576a906b40 ]

KFD_GC_VERSION was recently updated to use a new function
for IP version checks. As a result, use KFD_GC_VERSION as
the common function for all IP version checks in KFD.

Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdgpu: Do not issue gpu reset from nbio v7_9 bif interrupt

[ Upstream commit 884e9b0827e889a8742e203ccd052101fb0b945d ]

In nbio v7_9, host driver should not issu gpu reset

Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Stanley Yang <Stanley.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

block: warn once for each partition in bio_check_ro()

[ Upstream commit 67d995e069535c32829f5d368d919063492cec6e ]

Commit 1b0a151c10a6 ("blk-core: use pr_warn_ratelimited() in
bio_check_ro()") fix message storm by limit the rate, however, there
will still be lots of message in the long term. Fix it better by warn
once for each partition.

Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20231128123027.971610-3-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

io_uring: use fget/fput consistently

[ Upstream commit 73363c262d6a7d26063da96610f61baf69a70f7c ]

Normally within a syscall it's fine to use fdget/fdput for grabbing a
file from the file table, and it's fine within io_uring as well. We do
that via io_uring_enter(2), io_uring_register(2), and then also for
cancel which is invoked from the latter. io_uring cannot close its own
file descriptors as that is explicitly rejected, and for the cancel
side of things, the file itself is just used as a lookup cookie.

However, it is more prudent to ensure that full references are always
grabbed. For anything threaded, either explicitly in the application
itself or through use of the io-wq worker threads, this is what happens
anyway. Generalize it and use fget/fput throughout.

Also see the below link for more details.

Link: https://lore.kernel.org/io-uring/CAG48ez1htVSO3TqmrF8QcX2WFuYTRM-VZ_N10i-VZgbtg=NNqw@mail.gmail.com/
Suggested-by: Jann Horn <jannh@google.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nvme-core: fix a memory leak in nvme_ns_info_from_identify()

[ Upstream commit e3139cef8257fcab1725441e2fd5fd0ccb5481b1 ]

In case of error, free the nvme_id_ns structure that was allocated
by nvme_identify_ns().

Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: hda: intel-nhlt: Ignore vbps when looking for DMIC 32 bps format

[ Upstream commit 7b4c93a50a2ebbbaf656cc4fa6aca74a6166d85b ]

When looking up DMIC blob from the NHLT table and the format is 32 bits,
ignore the vbps matching for 32 bps for DMIC since some NHLT table have
the vbps as 24, some have it as 32.
The DMIC hardware supports only one type of 32 bit sample size, which is
24 bit sampling on the MSB side and bits[1:0] is used for indicating the
channel number.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20231127111658.17275-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

debugfs: fix automount d_fsdata usage

[ Upstream commit 0ed04a1847a10297595ac24dc7d46b35fb35f90a ]

debugfs_create_automount() stores a function pointer in d_fsdata,
but since commit 7c8d469877b1 ("debugfs: add support for more
elaborate ->d_fsdata") debugfs_release_dentry() will free it, now
conditionally on DEBUGFS_FSDATA_IS_REAL_FOPS_BIT, but that's not
set for the function pointer in automount. As a result, removing
an automount dentry would attempt to free the function pointer.
Luckily, the only user of this (tracing) never removes it.

Nevertheless, it's safer if we just handle the fsdata in one way,
namely either DEBUGFS_FSDATA_IS_REAL_FOPS_BIT or allocated. Thus,
change the automount to allocate it, and use the real_fops in the
data to indicate whether or not automount is filled, rather than
adding a type tag. At least for now this isn't actually needed,
but the next changes will require it.

Also check in debugfs_file_get() that it gets only called
on regular files, just to make things clearer.

Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: mac80211: handle 320 MHz in ieee80211_ht_cap_ie_to_sta_ht_cap

[ Upstream commit 00f7d153f3358a7c7e35aef66fcd9ceb95d90430 ]

The new 320 MHz channel width wasn't handled, so connecting
a station to a 320 MHz AP would limit the station to 20 MHz
(on HT) after a warning, handle 320 MHz to fix that.

Signed-off-by: Ben Greear <greearb@candelatech.com>
Link: https://lore.kernel.org/r/20231109182201.495381-1-greearb@candelatech.com
[write a proper commit message]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: avoid offset calculation on NULL pointer

[ Upstream commit ef5828805842204dd0259ecfc132b5916c8a77ae ]

ieee80211_he_6ghz_oper() can be passed a NULL pointer
and checks for that, but already did the calculation
to inside of it before. Move it after the check.

Signed-off-by: Michael-CY Lee <michael-cy.lee@mediatek.com>
Link: https://lore.kernel.org/r/20231122030237.31276-1-michael-cy.lee@mediatek.com
[rewrite commit message]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: cfg80211: lock wiphy mutex for rfkill poll

[ Upstream commit 8e2f6f2366219b3304b227bdd2f04b64c92e3e12 ]

We want to guarantee the mutex is held for pretty much
all operations, so ensure that here as well.

Reported-by: syzbot+7e59a5bfc7a897247e18@syzkaller.appspotmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mptcp: fix uninit-value in mptcp_incoming_options

[ Upstream commit 237ff253f2d4f6307b7b20434d7cbcc67693298b ]

Added initialization use_ack to mptcp_parse_option().

Reported-by: syzbot+b834a6b2decad004cfa1@syzkaller.appspotmail.com
Signed-off-by: Edward Adam Davis <eadavis@qq.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: hda - Fix speaker and headset mic pin config for CHUWI CoreBook XPro

[ Upstream commit 7c9caa299335df94ad1c58f70a22f16a540eab60 ]

This patch corrected the speaker and headset mic pin config to the more
appropriate values.

Signed-off-by: Vasiliy Kovalev <kovalev@altlinux.org>
Link: https://lore.kernel.org/r/20231117170923.106822-1-kovalev@altlinux.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pinctrl: lochnagar: Don't build on MIPS

[ Upstream commit 6588732445ff19f6183f0fa72ddedf67e5a5be32 ]

MIPS appears to define a RST symbol at a high level, which clashes
with some register naming in the driver. Since there is currently
no case for running this driver on MIPS devices simply cut off the
build of this driver on MIPS.

Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202311071303.JJMAOjy4-lkp@intel.com/
Suggested-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20231115162853.1891940-1-ckeepax@opensource.cirrus.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

kunit: Reset suite counter right before running tests

[ Upstream commit 2e3c94aed51eabbe9c1c0ee515371ea5441c2fa7 ]

Today we reset the suite counter as part of the suite cleanup,
called from the module exit callback, but it might not work that
well as one can try to collect results without unloading a previous
test (either unintentionally or due to dependencies).

For easy reproduction try to load the kunit-test.ko and then
collect and parse results from the kunit-example-test.ko load.
Parser will complain about mismatch of expected test number:

[ ] KTAP version 1
[ ] 1..1
[ ]     # example: initializing suite
[ ]     KTAP version 1
[ ]     # Subtest: example
..
[ ] # example: pass:5 fail:0 skip:4 total:9
[ ] # Totals: pass:6 fail:0 skip:6 total:12
[ ] ok 7 example

[ ] [ERROR] Test: example: Expected test number 1 but found 7
[ ] ===================== [PASSED] example =====================
[ ] ============================================================
[ ] Testing complete. Ran 12 tests: passed: 6, skipped: 6, errors: 1

Since we are now printing suite test plan on every module load,
right before running suite tests, we should make sure that suite
counter will also start from 1. Easiest solution seems to be move
counter reset to the __kunit_test_suites_init() function.

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: David Gow <davidgow@google.com>
Cc: Rae Moar <rmoar@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

kunit: Warn if tests are slow

[ Upstream commit f8f2847f739dc899d0e563eac01299dadefa64ff ]

Kunit recently gained support to setup attributes, the first one being
the speed of a given test, then allowing to filter out slow tests.

A slow test is defined in the documentation as taking more than one
second. There's an another speed attribute called "super slow" but whose
definition is less clear.

Add support to the test runner to check the test execution time, and
report tests that should be marked as slow but aren't.

Signed-off-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pinctrl: s32cc: Avoid possible string truncation

[ Upstream commit 08e8734d877a9a0fb8af1254a4ce58734fbef296 ]

With "W=1" and "-Wformat-truncation" build options, the kernel test robot
found a possible string truncation warning in pinctrl-s32cc.c, which uses
an 8-byte char array to hold a memory region name "map%u". Since the
maximum number of digits that a u32 value can present is 10, and the "map"
string occupies 3 bytes with a termination '\0', which means the rest 4
bytes cannot fully present the integer "X" that exceeds 4 digits.

Here we check if the number >= 10000, which is the lowest value that
contains more than 4 digits.

Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202311030159.iyUGjNGF-lkp@intel.com/
Signed-off-by: Chester Lin <clin@suse.com>
Link: https://lore.kernel.org/r/20231107141044.24058-1-clin@suse.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

f2fs: explicitly null-terminate the xattr list

commit e26b6d39270f5eab0087453d9b544189a38c8564 upstream.

When setting an xattr, explicitly null-terminate the xattr list.  This
eliminates the fragile assumption that the unused xattr space is always
zeroed.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 6.6.12

Link: https://lore.kernel.org/r/20240113094204.275569789@linuxfoundation.org
Tested-by: Salvatore Bonaccorso <carnil@debian.org>
Tested-by: Takeshi Ogasawara <takeshi.ogasawara@futuring-girl.com>
Tested-by: Luna Jernberg <droidbittin@gmail.com>
Tested-by: SeongJae Park <sj@kernel.org>
Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>
Tested-by: Ricardo B. Marliere <ricardo@marliere.net>
Tested-by: Ron Economos <re@w6rz.net>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: kernelci.org bot <bot@kernelci.org>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Tested-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nfsd: drop the nfsd_put helper

commit 64e6304169f1e1f078e7f0798033f80a7fb0ea46 upstream.

It's not safe to call nfsd_put once nfsd_last_thread has been called, as
that function will zero out the nn->nfsd_serv pointer.

Drop the nfsd_put helper altogether and open-code the svc_put in its
callers instead. That allows us to not be reliant on the value of that
pointer when handling an error.

Fixes: 2a501f55cd64 ("nfsd: call nfsd_last_thread() before final nfsd_put()")
Reported-by: Zhi Li <yieli@redhat.com>
Cc: NeilBrown <neilb@suse.de>
Signed-off-by: Jeffrey Layton <jlayton@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 6.6.11

Link: https://lore.kernel.org/r/20240108150602.976232871@linuxfoundation.org
Tested-by: SeongJae Park <sj@kernel.org>
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Tested-by: Allen Pais <apais@linux.microsoft.com>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Salvatore Bonaccorso <carnil@debian.org>
Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>
Tested-by: Ron Economos <re@w6rz.net>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Takeshi Ogasawara <takeshi.ogasawara@futuring-girl.com>
Tested-by: Luna Jernberg <droidbittin@gmail.com>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Kelsey Steele <kelseysteele@linux.microsoft.com>
Tested-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Tested-by: kernelci.org bot <bot@kernelci.org>
Tested-by: Ricardo B. Marliere <ricardo@marliere.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: qcom: camss: Comment CSID dt_id field

commit f910d3ba78a2677c23508f225eb047d89eb4b2b6 upstream.

Digging into the documentation we find that the DT_ID bitfield is used to
map the six bit DT to a two bit ID code. This value is concatenated to the
VC bitfield to create a CID value. DT_ID is the two least significant bits
of CID and VC the most significant bits.

Originally we set dt_id = vc * 4 in and then subsequently set dt_id = vc.

commit 3c4ed72a16bc ("media: camss: sm8250: Virtual channels for CSID")
silently fixed the multiplication by four which would give a better
value for the generated CID without mentioning what was being done or why.

Next up I haplessly changed the value back to "dt_id = vc * 4" since there
didn't appear to be any logic behind it.

Hans asked what the change was for and I honestly couldn't remember the
provenance of it, so I dug in.

Link: https://lore.kernel.org/linux-arm-msm/edd4bf9b-0e1b-883c-1a4d-50f4102c3924@xs4all.nl/
Add a comment so the next hapless programmer doesn't make this same
mistake.

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cxl/memdev: Hold region_rwsem during inject and clear poison ops

commit 0e33ac9c3ffe5e4f55c68345f44cea7fec2fe750 upstream.

Poison inject and clear are supported via debugfs where a privileged
user can inject and clear poison to a device physical address.

Commit 458ba8189cb4 ("cxl: Add cxl_decoders_committed() helper")
added a lockdep assert that highlighted a gap in poison inject and
clear functions where holding the dpa_rwsem does not assure that a
a DPA is not added to a region.

The impact for inject and clear is that if the DPA address being
injected or cleared has been attached to a region, but not yet
committed, the dev_dbg() message intended to alert the debug user
that they are acting on a mapped address is not emitted. Also, the
cxl_poison trace event that serves as a log of the inject and clear
activity will not include region info.

Close this gap by snapshotting an unchangeable region state during
poison inject and clear operations. That means holding both the
region_rwsem and the dpa_rwsem during the inject and clear ops.

Fixes: d2fbc4865802 ("cxl/memdev: Add support for the Inject Poison mailbox command")
Fixes: 9690b07748d1 ("cxl/memdev: Add support for the Clear Poison mailbox command")
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/08721dc1df0a51e4e38fecd02425c3475912dfd5.1701041440.git.alison.schofield@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cxl/hdm: Fix a benign lockdep splat

commit 36a1c2ee50f573972aea3c3019555f47ee0094c0 upstream.

The new helper "cxl_num_decoders_committed()" added a lockdep assertion
to validate that port->commit_end is protected against modification.
That assertion fires in init_hdm_decoder() where it is initializing
port->commit_end. Given that it is both accessing and writing that
property it obstensibly needs the lock.

In practice, CXL decoder commit rules (must commit in order) and the
in-order discovery of device decoders makes the manipulation of
->commit_end in init_hdm_decoder() safe. However, rather than rely on
the subtle rules of CXL hardware, just make the implementation obviously
correct from a software perspective.

The Fixes: tag is only for cleaning up a lockdep splat, there is no
functional issue addressed by this fix.

Fixes: 458ba8189cb4 ("cxl: Add cxl_decoders_committed() helper")
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/170025232811.2147250.16376901801315194121.stgit@djiang5-mobl3
Acked-by: Davidlohr Bueso <dave@stgolabs.net>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cxl: Add cxl_num_decoders_committed() usage to cxl_test

commit e05501e8a84eee4f819f31b9ce663bddd01b3b69 upstream.

Commit 458ba8189cb4 ("cxl: Add cxl_decoders_committed() helper") missed the
conversion for cxl_test. Add usage of cxl_num_decoders_committed() to
replace the open coding.

Suggested-by: Alison Schofield <alison.schofield@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Link: https://lore.kernel.org/r/169929160525.824083.11813222229025394254.stgit@djiang5-mobl3
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: sdhci-sprd: Fix eMMC init failure after hw reset

commit 8abf77c88929b6d20fa4f9928b18d6448d64e293 upstream.

Some eMMC devices that do not close the auto clk gate after hw reset will
cause eMMC initialization to fail. Let's fix this.

Signed-off-by: Wenchao Chen <wenchao.chen@unisoc.com>
Fixes: ff874dbc4f86 ("mmc: sdhci-sprd: Disable CLK_AUTO when the clock is less than 400K")
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20231204064934.21236-1-wenchao.chen@unisoc.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: core: Cancel delayed work before releasing host

commit 1036f69e251380573e256568cf814506e3fb9988 upstream.

On RZ/Five SMARC EVK, where probing of SDHI is deferred due to probe
deferral of the vqmmc-supply regulator:

    ------------[ cut here ]------------
    WARNING: CPU: 0 PID: 0 at kernel/time/timer.c:1738 __run_timers.part.0+0x1d0/0x1e8
    Modules linked in:
    CPU: 0 PID: 0 Comm: swapper Not tainted 6.7.0-rc4 #101
    Hardware name: Renesas SMARC EVK based on r9a07g043f01 (DT)
    epc : __run_timers.part.0+0x1d0/0x1e8
     ra : __run_timers.part.0+0x134/0x1e8
    epc : ffffffff800771a4 ra : ffffffff80077108 sp : ffffffc800003e60
     gp : ffffffff814f5028 tp : ffffffff8140c5c0 t0 : ffffffc800000000
     t1 : 0000000000000001 t2 : ffffffff81201300 s0 : ffffffc800003f20
     s1 : ffffffd8023bc4a0 a0 : 00000000fffee6b0 a1 : 0004010000400000
     a2 : ffffffffc0000016 a3 : ffffffff81488640 a4 : ffffffc800003e60
     a5 : 0000000000000000 a6 : 0000000004000000 a7 : ffffffc800003e68
     s2 : 0000000000000122 s3 : 0000000000200000 s4 : 0000000000000000
     s5 : ffffffffffffffff s6 : ffffffff81488678 s7 : ffffffff814886c0
     s8 : ffffffff814f49c0 s9 : ffffffff81488640 s10: 0000000000000000
     s11: ffffffc800003e60 t3 : 0000000000000240 t4 : 0000000000000a52
     t5 : ffffffd8024ae018 t6 : ffffffd8024ae038
    status: 0000000200000100 badaddr: 0000000000000000 cause: 0000000000000003
    [<ffffffff800771a4>] __run_timers.part.0+0x1d0/0x1e8
    [<ffffffff800771e0>] run_timer_softirq+0x24/0x4a
    [<ffffffff80809092>] __do_softirq+0xc6/0x1fa
    [<ffffffff80028e4c>] irq_exit_rcu+0x66/0x84
    [<ffffffff80800f7a>] handle_riscv_irq+0x40/0x4e
    [<ffffffff80808f48>] call_on_irq_stack+0x1c/0x28
    ---[ end trace 0000000000000000 ]---

What happens?

    renesas_sdhi_probe()
    {
     tmio_mmc_host_alloc()
    mmc_alloc_host()
INIT_DELAYED_WORK(&host->detect, mmc_rescan);

devm_request_irq(tmio_mmc_irq);

/*
 * After this, the interrupt handler may be invoked at any time
 *
 *  tmio_mmc_irq()
 *  {
 * __tmio_mmc_card_detect_irq()
 *     mmc_detect_change()
 * _mmc_detect_change()
 *     mmc_schedule_delayed_work(&host->detect, delay);
 *  }
 */

tmio_mmc_host_probe()
    tmio_mmc_init_ocr()
-EPROBE_DEFER

tmio_mmc_host_free()
    mmc_free_host()
    }

When expire_timers() runs later, it warns because the MMC host structure
containing the delayed work was freed, and now contains an invalid work
function pointer.

Fix this by cancelling any pending delayed work before releasing the
MMC host structure.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/205dc4c91b47e31b64392fe2498c7a449e717b4b.1701689330.git.geert+renesas@glider.be
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: rpmb: fixes pause retune on all RPMB partitions.

commit e7794c14fd73e5eb4a3e0ecaa5334d5a17377c50 upstream.

When RPMB was converted to a character device, it added support for
multiple RPMB partitions (Commit 97548575bef3 ("mmc: block: Convert RPMB to
a character device").

One of the changes in this commit was transforming the variable target_part
defined in __mmc_blk_ioctl_cmd into a bitmask. This inadvertently regressed
the validation check done in mmc_blk_part_switch_pre() and
mmc_blk_part_switch_post(), so let's fix it.

Fixes: 97548575bef3 ("mmc: block: Convert RPMB to a character device")
Signed-off-by: Jorge Ramirez-Ortiz <jorge@foundries.io>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20231201153143.1449753-1-jorge@foundries.io
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: meson-mx-sdhc: Fix initialization frozen issue

commit 8c124d998ea0c9022e247b11ac51f86ec8afa0e1 upstream.

Commit 4bc31edebde5 ("mmc: core: Set HS clock speed before sending
HS CMD13") set HS clock (52MHz) before switching to HS mode. For this
freq, FCLK_DIV5 will be selected and div value is 10 (reg value is 9).
Then we set rx_clk_phase to 11 or 15 which is out of range and make
hardware frozen. After we send command request, no irq will be
interrupted and the mmc driver will keep to wait for request finished,
even durning rebooting.

So let's set it to Phase 90 which should work in most cases. Then let
meson_mx_sdhc_execute_tuning() to find the accurate value for data
transfer.

If this doesn't work, maybe need to define a factor in dts.

Fixes: e4bf1b0970ef ("mmc: host: meson-mx-sdhc: new driver for the Amlogic Meson SDHC host")
Signed-off-by: Ziyang Huang <hzyitc@outlook.com>
Tested-by: Anand Moon <linux.amoon@gmail.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/TYZPR01MB5556A3E71554A2EC08597EA4C9CDA@TYZPR01MB5556.apcprd01.prod.exchangelabs.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amd/display: Fix sending VSC (+ colorimetry) packets for DP/eDP displays without PSR

commit 202260f64519e591b5cd99626e441b6559f571a3 upstream.

The check for sending the vsc infopacket to the display was gated behind
PSR (Panel Self Refresh) being enabled.

The vsc infopacket also contains the colorimetry (specifically the
container color gamut) information for the stream on modern DP.

PSR is typically only supported on mobile phone eDP displays, thus this
was not getting sent for typical desktop monitors or TV screens.

This functionality is needed for proper HDR10 functionality on DP as it
wants BT2020 RGB/YCbCr for the container color space.

Cc: stable@vger.kernel.org
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Xaver Hugl <xaver.hugl@gmail.com>
Cc: Melissa Wen <mwen@igalia.com>
Fixes: 15f9dfd545a1 ("drm/amd/display: Register Colorspace property for DP and HDMI")
Tested-by: Simon Berz <simon@berz.me>
Tested-by: Xaver Hugl <xaver.hugl@kde.org>
Signed-off-by: Joshua Ashton <joshua@froggi.es>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amd/display: add nv12 bounding box

commit 7e725c20fea8914ef1829da777f517ce1a93d388 upstream.

This was included in gpu_info firmware, move it into the
driver for consistency with other nv1x parts.

Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2318
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu: skip gpu_info fw loading on navi12

commit 21f6137c64c65d6808c4a81006956197ca203383 upstream.

It's no longer required.

Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2318
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm: fix unmap_mapping_range high bits shift bug

commit 9eab0421fa94a3dde0d1f7e36ab3294fc306c99d upstream.

The bug happens when highest bit of holebegin is 1, suppose holebegin is
0x8000000111111000, after shift, hba would be 0xfff8000000111111, then
vma_interval_tree_foreach would look it up fail or leads to the wrong
result.

error call seq e.g.:
- mmap(..., offset=0x8000000111111000)
  |- syscall(mmap, ... unsigned long, off):
     |- ksys_mmap_pgoff( ... , off >> PAGE_SHIFT);

  here pgoff is correctly shifted to 0x8000000111111,
  but pass 0x8000000111111000 as holebegin to unmap
  would then cause terrible result, as shown below:

- unmap_mapping_range(..., loff_t const holebegin)
  |- pgoff_t hba = holebegin >> PAGE_SHIFT;
          /* hba = 0xfff8000000111111 unexpectedly */

The issue happens in Heterogeneous computing, where the device(e.g.
gpu) and host share the same virtual address space.

A simple workflow pattern which hit the issue is:
        /* host */
    1. userspace first mmap a file backed VA range with specified offset.
                        e.g. (offset=0x800..., mmap return: va_a)
    2. write some data to the corresponding sys page
                         e.g. (va_a = 0xAABB)
        /* device */
    3. gpu workload touches VA, triggers gpu fault and notify the host.
        /* host */
    4. reviced gpu fault notification, then it will:
            4.1 unmap host pages and also takes care of cpu tlb
                  (use unmap_mapping_range with offset=0x800...)
            4.2 migrate sys page to device
            4.3 setup device page table and resolve device fault.
        /* device */
    5. gpu workload continued, it accessed va_a and got 0xAABB.
    6. gpu workload continued, it wrote 0xBBCC to va_a.
        /* host */
    7. userspace access va_a, as expected, it will:
            7.1 trigger cpu vm fault.
            7.2 driver handling fault to migrate gpu local page to host.
    8. userspace then could correctly get 0xBBCC from va_a
    9. done

But in step 4.1, if we hit the bug this patch mentioned, then userspace
would never trigger cpu fault, and still get the old value: 0xAABB.

Making holebegin unsigned first fixes the bug.

Link: https://lkml.kernel.org/r/20231220052839.26970-1-jiajun.xie.sh@gmail.com
Signed-off-by: Jiajun Xie <jiajun.xie.sh@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

i2c: core: Fix atomic xfer check for non-preempt config

commit a3368e1186e3ce8e38f78cbca019622095b1f331 upstream.

Since commit aa49c90894d0 ("i2c: core: Run atomic i2c xfer when
!preemptible"), the whole reboot/power off sequence on non-preempt kernels
is using atomic i2c xfer, as !preemptible() always results to 1.

During device_shutdown(), the i2c might be used a lot and not all busses
have implemented an atomic xfer handler. This results in a lot of
avoidable noise, like:

[   12.687169] No atomic I2C transfer handler for 'i2c-0'
[   12.692313] WARNING: CPU: 6 PID: 275 at drivers/i2c/i2c-core.h:40 i2c_smbus_xfer+0x100/0x118
...

Fix this by allowing non-atomic xfer when the interrupts are enabled, as
it was before.

Link: https://lore.kernel.org/r/20231222230106.73f030a5@yea
Link: https://lore.kernel.org/r/20240102150350.3180741-1-mwalle@kernel.org
Link: https://lore.kernel.org/linux-i2c/13271b9b-4132-46ef-abf8-2c311967bb46@mailbox.org/
Fixes: aa49c90894d0 ("i2c: core: Run atomic i2c xfer when !preemptible")
Cc: stable@vger.kernel.org # v5.2+
Signed-off-by: Benjamin Bara <benjamin.bara@skidata.com>
Tested-by: Michael Walle <mwalle@kernel.org>
Tested-by: Tor Vic <torvic9@mailbox.org>
[wsa: removed a comment which needs more work, code is ok]
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/kprobes: fix incorrect return address calculation in kprobe_emulate_call_indirect

commit f5d03da48d062966c94f0199d20be0b3a37a7982 upstream.

kprobe_emulate_call_indirect currently uses int3_emulate_call to emulate
indirect calls. However, int3_emulate_call always assumes the size of
the call to be 5 bytes when calculating the return address. This is
incorrect for register-based indirect calls in x86, which can be either
2 or 3 bytes depending on whether REX prefix is used. At kprobe runtime,
the incorrect return address causes control flow to land onto the wrong
place after return -- possibly not a valid instruction boundary. This
can lead to a panic like the following:

[    7.308204][    C1] BUG: unable to handle page fault for address: 000000000002b4d8
[    7.308883][    C1] #PF: supervisor read access in kernel mode
[    7.309168][    C1] #PF: error_code(0x0000) - not-present page
[    7.309461][    C1] PGD 0 P4D 0
[    7.309652][    C1] Oops: 0000 [#1] SMP
[    7.309929][    C1] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 6.7.0-rc5-trace-for-next #6
[    7.310397][    C1] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-20220807_005459-localhost 04/01/2014
[    7.311068][    C1] RIP: 0010:__common_interrupt+0x52/0xc0
[    7.311349][    C1] Code: 01 00 4d 85 f6 74 39 49 81 fe 00 f0 ff ff 77 30 4c 89 f7 4d 8b 5e 68 41 ba 91 76 d8 42 45 03 53 fc 74 02 0f 0b cc ff d3 65 48 <8b> 05 30 c7 ff 7e 65 4c 89 3d 28 c7 ff 7e 5b 41 5c 41 5e 41 5f c3
[    7.312512][    C1] RSP: 0018:ffffc900000e0fd0 EFLAGS: 00010046
[    7.312899][    C1] RAX: 0000000000000001 RBX: 0000000000000023 RCX: 0000000000000001
[    7.313334][    C1] RDX: 00000000000003cd RSI: 0000000000000001 RDI: ffff888100d302a4
[    7.313702][    C1] RBP: 0000000000000001 R08: 0ef439818636191f R09: b1621ff338a3b482
[    7.314146][    C1] R10: ffffffff81e5127b R11: ffffffff81059810 R12: 0000000000000023
[    7.314509][    C1] R13: 0000000000000000 R14: ffff888100d30200 R15: 0000000000000000
[    7.314951][    C1] FS:  0000000000000000(0000) GS:ffff88813bc80000(0000) knlGS:0000000000000000
[    7.315396][    C1] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[    7.315691][    C1] CR2: 000000000002b4d8 CR3: 0000000003028003 CR4: 0000000000370ef0
[    7.316153][    C1] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[    7.316508][    C1] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[    7.316948][    C1] Call Trace:
[    7.317123][    C1]  <IRQ>
[    7.317279][    C1]  ? __die_body+0x64/0xb0
[    7.317482][    C1]  ? page_fault_oops+0x248/0x370
[    7.317712][    C1]  ? __wake_up+0x96/0xb0
[    7.317964][    C1]  ? exc_page_fault+0x62/0x130
[    7.318211][    C1]  ? asm_exc_page_fault+0x22/0x30
[    7.318444][    C1]  ? __cfi_native_send_call_func_single_ipi+0x10/0x10
[    7.318860][    C1]  ? default_idle+0xb/0x10
[    7.319063][    C1]  ? __common_interrupt+0x52/0xc0
[    7.319330][    C1]  common_interrupt+0x78/0x90
[    7.319546][    C1]  </IRQ>
[    7.319679][    C1]  <TASK>
[    7.319854][    C1]  asm_common_interrupt+0x22/0x40
[    7.320082][    C1] RIP: 0010:default_idle+0xb/0x10
[    7.320309][    C1] Code: 4c 01 c7 4c 29 c2 e9 72 ff ff ff cc cc cc cc 90 90 90 90 90 90 90 90 90 90 90 b8 0c 67 40 a5 66 90 0f 00 2d 09 b9 3b 00 fb f4 <fa> c3 0f 1f 00 90 90 90 90 90 90 90 90 90 90 90 b8 0c 67 40 a5 e9
[    7.321449][    C1] RSP: 0018:ffffc9000009bee8 EFLAGS: 00000256
[    7.321808][    C1] RAX: ffff88813bca8b68 RBX: 0000000000000001 RCX: 000000000001ef0c
[    7.322227][    C1] RDX: 0000000000000000 RSI: 0000000000000001 RDI: 000000000001ef0c
[    7.322656][    C1] RBP: ffffc9000009bef8 R08: 8000000000000000 R09: 00000000000008c2
[    7.323083][    C1] R10: 0000000000000000 R11: ffffffff81058e70 R12: 0000000000000000
[    7.323530][    C1] R13: ffff8881002b30c0 R14: 0000000000000000 R15: 0000000000000000
[    7.323948][    C1]  ? __cfi_lapic_next_deadline+0x10/0x10
[    7.324239][    C1]  default_idle_call+0x31/0x50
[    7.324464][    C1]  do_idle+0xd3/0x240
[    7.324690][    C1]  cpu_startup_entry+0x25/0x30
[    7.324983][    C1]  start_secondary+0xb4/0xc0
[    7.325217][    C1]  secondary_startup_64_no_verify+0x179/0x17b
[    7.325498][    C1]  </TASK>
[    7.325641][    C1] Modules linked in:
[    7.325906][    C1] CR2: 000000000002b4d8
[    7.326104][    C1] ---[ end trace 0000000000000000 ]---
[    7.326354][    C1] RIP: 0010:__common_interrupt+0x52/0xc0
[    7.326614][    C1] Code: 01 00 4d 85 f6 74 39 49 81 fe 00 f0 ff ff 77 30 4c 89 f7 4d 8b 5e 68 41 ba 91 76 d8 42 45 03 53 fc 74 02 0f 0b cc ff d3 65 48 <8b> 05 30 c7 ff 7e 65 4c 89 3d 28 c7 ff 7e 5b 41 5c 41 5e 41 5f c3
[    7.327570][    C1] RSP: 0018:ffffc900000e0fd0 EFLAGS: 00010046
[    7.327910][    C1] RAX: 0000000000000001 RBX: 0000000000000023 RCX: 0000000000000001
[    7.328273][    C1] RDX: 00000000000003cd RSI: 0000000000000001 RDI: ffff888100d302a4
[    7.328632][    C1] RBP: 0000000000000001 R08: 0ef439818636191f R09: b1621ff338a3b482
[    7.329223][    C1] R10: ffffffff81e5127b R11: ffffffff81059810 R12: 0000000000000023
[    7.329780][    C1] R13: 0000000000000000 R14: ffff888100d30200 R15: 0000000000000000
[    7.330193][    C1] FS:  0000000000000000(0000) GS:ffff88813bc80000(0000) knlGS:0000000000000000
[    7.330632][    C1] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[    7.331050][    C1] CR2: 000000000002b4d8 CR3: 0000000003028003 CR4: 0000000000370ef0
[    7.331454][    C1] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[    7.331854][    C1] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[    7.332236][    C1] Kernel panic - not syncing: Fatal exception in interrupt
[    7.332730][    C1] Kernel Offset: disabled
[    7.333044][    C1] ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]---

The relevant assembly code is (from objdump, faulting address
highlighted):

ffffffff8102ed9d:       41 ff d3                  call   *%r11
ffffffff8102eda0:       65 48 <8b> 05 30 c7 ff    mov    %gs:0x7effc730(%rip),%rax

The emulation incorrectly sets the return address to be ffffffff8102ed9d
+ 0x5 = ffffffff8102eda2, which is the 8b byte in the middle of the next
mov. This in turn causes incorrect subsequent instruction decoding and
eventually triggers the page fault above.

Instead of invoking int3_emulate_call, perform push and jmp emulation
directly in kprobe_emulate_call_indirect. At this point we can obtain
the instruction size from p->ainsn.size so that we can calculate the
correct return address.

Link: https://lore.kernel.org/all/20240102233345.385475-1-jinghao7@illinois.edu/
Fixes: 6256e668b7af ("x86/kprobes: Use int3 instead of debug trap for single-step")
Cc: stable@vger.kernel.org
Signed-off-by: Jinghao Jia <jinghao7@illinois.edu>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

firewire: ohci: suppress unexpected system reboot in AMD Ryzen machines and ASM108x/VT630x PCIe cards

commit ac9184fbb8478dab4a0724b279f94956b69be827 upstream.

VIA VT6306/6307/6308 provides PCI interface compliant to 1394 OHCI. When
the hardware is combined with Asmedia ASM1083/1085 PCIe-to-PCI bus bridge,
it appears that accesses to its 'Isochronous Cycle Timer' register (offset
0xf0 on PCI memory space) often causes unexpected system reboot in any
type of AMD Ryzen machine (both 0x17 and 0x19 families). It does not
appears in the other type of machine (AMD pre-Ryzen machine, Intel
machine, at least), or in the other OHCI 1394 hardware (e.g. Texas
Instruments).

The issue explicitly appears at a commit dcadfd7f7c74 ("firewire: core:
use union for callback of transaction completion") added to v6.5 kernel.
It changed 1394 OHCI driver to access to the register every time to
dispatch local asynchronous transaction. However, the issue exists in
older version of kernel as long as it runs in AMD Ryzen machine, since
the access to the register is required to maintain bus time. It is not
hard to imagine that users experience the unexpected system reboot when
generating bus reset by plugging any devices in, or reading the register
by time-aware application programs; e.g. audio sample processing.

This commit suppresses the unexpected system reboot in the combination of
hardware. It avoids the access itself. As a result, the software stack can
not provide the hardware time anymore to unit drivers, userspace
applications, and nodes in the same IEEE 1394 bus. It brings apparent
disadvantage since time-aware application programs require it, while
time-unaware applications are available again; e.g. sbp2.

Cc: stable@vger.kernel.org
Reported-by: Jiri Slaby <jirislaby@kernel.org>
Closes: https://bugzilla.suse.com/show_bug.cgi?id=1215436
Reported-by: Mario Limonciello <mario.limonciello@amd.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217994
Reported-by: Tobias Gruetzmacher <tobias-lists@23.gs>
Closes: https://sourceforge.net/p/linux1394/mailman/message/58711901/
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=2240973
Closes: https://bugs.launchpad.net/linux/+bug/2043905
Link: https://lore.kernel.org/r/20240102110150.244475-1-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm/mglru: skip special VMAs in lru_gen_look_around()

commit c28ac3c7eb945fee6e20f47d576af68fdff1392a upstream.

Special VMAs like VM_PFNMAP can contain anon pages from COW.  There isn't
much profit in doing lookaround on them.  Besides, they can trigger the
pte_special() warning in get_pte_pfn().

Skip them in lru_gen_look_around().

Link: https://lkml.kernel.org/r/20231223045647.1566043-1-yuzhao@google.com
Fixes: 018ee47f1489 ("mm: multi-gen LRU: exploit locality in rmap")
Signed-off-by: Yu Zhao <yuzhao@google.com>
Reported-by: syzbot+03fd9b3f71641f0ebf2d@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/000000000000f9ff00060d14c256@google.com/
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: constify sk_dst_get() and __sk_dst_get() argument

[ Upstream commit 5033f58d5feed1040eebeadb0c5efc95b8bf5720 ]

Both helpers only read fields from their socket argument.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: libwx: fix memory leak on free page

[ Upstream commit 738b54b9b6236f573eed2453c4cbfa77326793e2 ]

ifconfig ethx up, will set page->refcount larger than 1,
and then ifconfig ethx down, calling __page_frag_cache_drain()
to free pages, it is not compatible with page pool.
So deleting codes which changing page->refcount.

Fixes: 3c47e8ae113a ("net: libwx: Support to receive packets in NAPI")
Signed-off-by: duanqiangwen <duanqiangwen@net-swift.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cxl/pmu: Ensure put_device on pmu devices

[ Upstream commit ef3d5cf9c59cccb012aa6b93d99f4c6eb5d6648e ]

The following kmemleaks were detected when removing the cxl module
stack:

unreferenced object 0xffff88822616b800 (size 1024):
...
  backtrace:
    [<00000000bedc6f83>] kmalloc_trace+0x26/0x90
    [<00000000448d1afc>] devm_cxl_pmu_add+0x3a/0x110 [cxl_core]
    [<00000000ca3bfe16>] 0xffffffffa105213b
    [<00000000ba7f78dc>] local_pci_probe+0x41/0x90
    [<000000005bb027ac>] pci_device_probe+0xb0/0x1c0
...
unreferenced object 0xffff8882260abcc0 (size 16):
...
  hex dump (first 16 bytes):
    70 6d 75 5f 6d 65 6d 30 2e 30 00 26 82 88 ff ff  pmu_mem0.0.&....
  backtrace:
...
    [<00000000152b5e98>] dev_set_name+0x43/0x50
    [<00000000c228798b>] devm_cxl_pmu_add+0x102/0x110 [cxl_core]
    [<00000000ca3bfe16>] 0xffffffffa105213b
    [<00000000ba7f78dc>] local_pci_probe+0x41/0x90
    [<000000005bb027ac>] pci_device_probe+0xb0/0x1c0
...
unreferenced object 0xffff8882272af200 (size 256):
...
  backtrace:
    [<00000000bedc6f83>] kmalloc_trace+0x26/0x90
    [<00000000a14d1813>] device_add+0x4ea/0x890
    [<00000000a3f07b47>] devm_cxl_pmu_add+0xbe/0x110 [cxl_core]
    [<00000000ca3bfe16>] 0xffffffffa105213b
    [<00000000ba7f78dc>] local_pci_probe+0x41/0x90
    [<000000005bb027ac>] pci_device_probe+0xb0/0x1c0
...

devm_cxl_pmu_add() correctly registers a device remove function but it
only calls device_del() which is only part of device unregistration.

Properly call device_unregister() to free up the memory associated with
the device.

Fixes: 1ad3f701c399 ("cxl/pci: Find and register CXL PMU devices")
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20231016-pmu-unregister-fix-v1-1-1e2eb2fa3c69@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: prevent mss overflow in skb_segment()

[ Upstream commit 23d05d563b7e7b0314e65c8e882bc27eac2da8e7 ]

Once again syzbot is able to crash the kernel in skb_segment() [1]

GSO_BY_FRAGS is a forbidden value, but unfortunately the following
computation in skb_segment() can reach it quite easily :

mss = mss * partial_segs;

65535 = 3 * 5 * 17 * 257, so many initial values of mss can lead to
a bad final result.

Make sure to limit segmentation so that the new mss value is smaller
than GSO_BY_FRAGS.

[1]

general protection fault, probably for non-canonical address 0xdffffc000000000e: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000070-0x0000000000000077]
CPU: 1 PID: 5079 Comm: syz-executor993 Not tainted 6.7.0-rc4-syzkaller-00141-g1ae4cd3cbdd0 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 11/10/2023
RIP: 0010:skb_segment+0x181d/0x3f30 net/core/skbuff.c:4551
Code: 83 e3 02 e9 fb ed ff ff e8 90 68 1c f9 48 8b 84 24 f8 00 00 00 48 8d 78 70 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <0f> b6 04 02 84 c0 74 08 3c 03 0f 8e 8a 21 00 00 48 8b 84 24 f8 00
RSP: 0018:ffffc900043473d0 EFLAGS: 00010202
RAX: dffffc0000000000 RBX: 0000000000010046 RCX: ffffffff886b1597
RDX: 000000000000000e RSI: ffffffff886b2520 RDI: 0000000000000070
RBP: ffffc90004347578 R08: 0000000000000005 R09: 000000000000ffff
R10: 000000000000ffff R11: 0000000000000002 R12: ffff888063202ac0
R13: 0000000000010000 R14: 000000000000ffff R15: 0000000000000046
FS: 0000555556e7e380(0000) GS:ffff8880b9900000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020010000 CR3: 0000000027ee2000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
udp6_ufo_fragment+0xa0e/0xd00 net/ipv6/udp_offload.c:109
ipv6_gso_segment+0x534/0x17e0 net/ipv6/ip6_offload.c:120
skb_mac_gso_segment+0x290/0x610 net/core/gso.c:53
__skb_gso_segment+0x339/0x710 net/core/gso.c:124
skb_gso_segment include/net/gso.h:83 [inline]
validate_xmit_skb+0x36c/0xeb0 net/core/dev.c:3626
__dev_queue_xmit+0x6f3/0x3d60 net/core/dev.c:4338
dev_queue_xmit include/linux/netdevice.h:3134 [inline]
packet_xmit+0x257/0x380 net/packet/af_packet.c:276
packet_snd net/packet/af_packet.c:3087 [inline]
packet_sendmsg+0x24c6/0x5220 net/packet/af_packet.c:3119
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg+0xd5/0x180 net/socket.c:745
__sys_sendto+0x255/0x340 net/socket.c:2190
__do_sys_sendto net/socket.c:2202 [inline]
__se_sys_sendto net/socket.c:2198 [inline]
__x64_sys_sendto+0xe0/0x1b0 net/socket.c:2198
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0x40/0x110 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x63/0x6b
RIP: 0033:0x7f8692032aa9
Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 d1 19 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007fff8d685418 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007f8692032aa9
RDX: 0000000000010048 RSI: 00000000200000c0 RDI: 0000000000000003
RBP: 00000000000f4240 R08: 0000000020000540 R09: 0000000000000014
R10: 0000000000000000 R11: 0000000000000246 R12: 00007fff8d685480
R13: 0000000000000001 R14: 00007fff8d685480 R15: 0000000000000003
</TASK>
Modules linked in:
---[ end trace 0000000000000000 ]---
RIP: 0010:skb_segment+0x181d/0x3f30 net/core/skbuff.c:4551
Code: 83 e3 02 e9 fb ed ff ff e8 90 68 1c f9 48 8b 84 24 f8 00 00 00 48 8d 78 70 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <0f> b6 04 02 84 c0 74 08 3c 03 0f 8e 8a 21 00 00 48 8b 84 24 f8 00
RSP: 0018:ffffc900043473d0 EFLAGS: 00010202
RAX: dffffc0000000000 RBX: 0000000000010046 RCX: ffffffff886b1597
RDX: 000000000000000e RSI: ffffffff886b2520 RDI: 0000000000000070
RBP: ffffc90004347578 R08: 0000000000000005 R09: 000000000000ffff
R10: 000000000000ffff R11: 0000000000000002 R12: ffff888063202ac0
R13: 0000000000010000 R14: 000000000000ffff R15: 0000000000000046
FS: 0000555556e7e380(0000) GS:ffff8880b9900000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020010000 CR3: 0000000027ee2000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400

Fixes: 3953c46c3ac7 ("sk_buff: allow segmenting based on frag sizes")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20231212164621.4131800-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/pseries/vas: Migration suspend waits for no in-progress open windows

[ Upstream commit 0cf72f7f14d12cb065c3d01954cf42fc5638aa69 ]

The hypervisor returns migration failure if all VAS windows are not
closed. During pre-migration stage, vas_migration_handler() sets
migration_in_progress flag and closes all windows from the list.
The allocate VAS window routine checks the migration flag, setup
the window and then add it to the list. So there is possibility of
the migration handler missing the window that is still in the
process of setup.

t1: Allocate and open VAS t2: Migration event
    window

lock vas_pseries_mutex
If migration_in_progress set
  unlock vas_pseries_mutex
  return
open window HCALL
unlock vas_pseries_mutex
Modify window HCALL lock vas_pseries_mutex
setup window migration_in_progress=true
Closes all windows from the list
// May miss windows that are
// not in the list
unlock vas_pseries_mutex
lock vas_pseries_mutex return
if nr_closed_windows == 0
  // No DLPAR CPU or migration
  add window to the list
  // Window will be added to the
  // list after the setup is completed
  unlock vas_pseries_mutex
  return
unlock vas_pseries_mutex
Close VAS window
// due to DLPAR CPU or migration
return -EBUSY

This patch resolves the issue with the following steps:
- Set the migration_in_progress flag without holding mutex.
- Introduce nr_open_wins_progress counter in VAS capabilities
  struct
- This counter tracks the number of open windows are still in
  progress
- The allocate setup window thread closes windows if the migration
  is set and decrements nr_open_window_progress counter
- The migration handler waits for no in-progress open windows.

The code flow with the fix is as follows:

t1: Allocate and open VAS       t2: Migration event
    window

lock vas_pseries_mutex
If migration_in_progress set
   unlock vas_pseries_mutex
   return
open window HCALL
nr_open_wins_progress++
// Window opened, but not
// added to the list yet
unlock vas_pseries_mutex
Modify window HCALL migration_in_progress=true
setup window lock vas_pseries_mutex
Closes all windows from the list
While nr_open_wins_progress {
    unlock vas_pseries_mutex
lock vas_pseries_mutex     sleep
if nr_closed_windows == 0     // Wait if any open window in
or migration is not started     // progress. The open window
   // No DLPAR CPU or migration     // thread closes the window without
   add window to the list     // adding to the list and return if
   nr_open_wins_progress--     // the migration is in progress.
   unlock vas_pseries_mutex
   return
Close VAS window
nr_open_wins_progress--
unlock vas_pseries_mutex
return -EBUSY     lock vas_pseries_mutex
}
unlock vas_pseries_mutex
return

Fixes: 37e6764895ef ("powerpc/pseries/vas: Add VAS migration handler")
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231125235104.3405008-1-haren@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

RISCV: KVM: update external interrupt atomically for IMSIC swfile

[ Upstream commit 4ad9843e1ea088bd2529290234c6c4c6374836a7 ]

The emulated IMSIC update the external interrupt pending depending on
the value of eidelivery and topei. It might lose an interrupt when it
is interrupted before setting the new value to the pending status.

For example, when VCPU0 sends an IPI to VCPU1 via IMSIC:

VCPU0                           VCPU1

                                CSRSWAP topei = 0
                                The VCPU1 has claimed all the external
                                interrupt in its interrupt handler.

                                topei of VCPU1's IMSIC = 0

set pending in VCPU1's IMSIC

topei of VCPU1' IMSIC = 1

set the external interrupt
pending of VCPU1

                                clear the external interrupt pending
                                of VCPU1

When the VCPU1 switches back to VS mode, it exits the interrupt handler
because the result of CSRSWAP topei is 0. If there are no other external
interrupts injected into the VCPU1's IMSIC, VCPU1 will never know this
pending interrupt unless it initiative read the topei.

If the interruption occurs between updating interrupt pending in IMSIC
and updating external interrupt pending of VCPU, it will not cause a
problem. Suppose that the VCPU1 clears the IPI pending in IMSIC right
after VCPU0 sets the pending, the external interrupt pending of VCPU1
will not be set because the topei is 0. But when the VCPU1 goes back to
VS mode, the pending IPI will be reported by the CSRSWAP topei, it will
not lose this interrupt.

So we only need to make the external interrupt updating procedure as a
critical section to avoid the problem.

Fixes: db8b7e97d613 ("RISC-V: KVM: Add in-kernel virtualization of AIA IMSIC")
Tested-by: Roy Lin <roy.lin@sifive.com>
Tested-by: Wayling Chen <wayling.chen@sifive.com>
Co-developed-by: Vincent Chen <vincent.chen@sifive.com>
Signed-off-by: Vincent Chen <vincent.chen@sifive.com>
Signed-off-by: Yong-Xuan Wang <yongxuan.wang@sifive.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dmaengine: fsl-edma: fix wrong pointer check in fsl_edma3_attach_pd()

[ Upstream commit bffa7218dcddb80e7f18dfa545dd4b359b11dd93 ]

device_link_add() returns NULL pointer not PTR_ERR() when it fails,
so replace the IS_ERR() check with NULL pointer check.

Fixes: 72f5801a4e2b ("dmaengine: fsl-edma: integrate v3 support")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20231129090000.841440-1-yangyingliang@huaweicloud.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dmaengine: idxd: Protect int_handle field in hw descriptor

[ Upstream commit 778dfacc903d4b1ef5b7a9726e3a36bc15913d29 ]

The int_handle field in hw descriptor should also be protected
by wmb() before possibly triggering a DMA read.

Fixes: eb0cf33a91b4 (dmaengine: idxd: move interrupt handle assignment)
Signed-off-by: Guanjun <guanjun@linux.alibaba.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Fenghua Yu <fenghua.yu@intel.com>
Reviewed-by: Lijun Pan <lijun.pan@intel.com>
Link: https://lore.kernel.org/r/20231211053704.2725417-2-guanjun@linux.alibaba.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/display: Increase frame warning limit with KASAN or KCSAN in dml

[ Upstream commit 5b750b22530fe53bf7fd6a30baacd53ada26911b ]

Does the same thing as:
commit 6740ec97bcdb ("drm/amd/display: Increase frame warning limit with KASAN or KCSAN in dml2")

Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202311302107.hUDXVyWT-lkp@intel.com/
Fixes: 67e38874b85b ("drm/amd/display: Increase num voltage states to 40")
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Alvin Lee <alvin.lee2@amd.com>
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Cc: Samson Tam <samson.tam@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

kernel/resource: Increment by align value in get_free_mem_region()

[ Upstream commit 659aa050a53817157b7459529538598a6449c1d3 ]

Currently get_free_mem_region() searches for available capacity
in increments equal to the region size being requested. This can
cause the search to take giant steps through the resource leaving
needless gaps and missing available space.

Specifically 'cxl create-region' fails with ERANGE even though capacity
of the given size and CXL's expected 256M x InterleaveWays alignment can
be satisfied.

Replace the total-request-size increment with a next alignment increment
so that the next possible address is always examined for availability.

Fixes: 14b80582c43e ("resource: Introduce alloc_free_mem_region()")
Reported-by: Dmytro Adamenko <dmytro.adamenko@intel.com>
Reported-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20231113221324.1118092-1-alison.schofield@intel.com
Cc: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cxl/core: Always hold region_rwsem while reading poison lists

[ Upstream commit 5558b92e8d39e18aa19619be2ee37274e9592528 ]

A read of a device poison list is triggered via a sysfs attribute
and the results are logged as kernel trace events of type cxl_poison.
The work is managed by either: a) the region driver when one of more
regions map the device, or by b) the memdev driver when no regions
map the device.

In the case of a) the region driver holds the region_rwsem while
reading the poison by committed endpoint decoder mappings and for
any unmapped resources. This makes sure that the cxl_poison trace
event trace reports valid region info. (Region name, HPA, and UUID).

In the case of b) the memdev driver holds the dpa_rwsem preventing
new DPA resources from being attached to a region. However, it leaves
a gap between region attach and decoder commit actions. If a DPA in
the gap is in the poison list, the cxl_poison trace event will omit
the region info.

Close the gap by holding the region_rwsem and the dpa_rwsem when
reading poison per memdev. Since both methods now hold both locks,
down_read both from the caller. Doing so also addresses the lockdep
assert that found this issue:
Commit 458ba8189cb4 ("cxl: Add cxl_decoders_committed() helper")

Fixes: f0832a586396 ("cxl/region: Provide region info to the cxl_poison trace event")
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/08e8e7ec9a3413b91d51de39e385653494b1eed0.1701041440.git.alison.schofield@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cxl: Add cxl_decoders_committed() helper

[ Upstream commit 458ba8189cb4380aa6a6cc4d52ab067f80a64829 ]

Add a helper to retrieve the number of decoders committed for the port.
Replace all the open coding of the calculation with the helper.

Link: https://lore.kernel.org/linux-cxl/651c98472dfed_ae7e729495@dwillia2-xfh.jf.intel.com.notmuch/
Suggested-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Jim Harris <jim.harris@samsung.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Link: https://lore.kernel.org/r/169747906849.272156.1729290904857372335.stgit@djiang5-mobl3
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Stable-dep-of: 5558b92e8d39 ("cxl/core: Always hold region_rwsem while reading poison lists")
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/display: Increase num voltage states to 40

[ Upstream commit 67e38874b85b8df7b23d29f78ac3d7ecccd9519d ]

[Description]
If during driver init stage there are greater than 20
intermediary voltage states while constructing the SOC
BB we could hit issues because we will index outside of the
clock_limits array and start overwriting data. Increase the
total number of states to 40 to avoid this issue.

Cc: stable@vger.kernel.org # 6.1+
Reviewed-by: Samson Tam <samson.tam@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/i915: Call intel_pre_plane_updates() also for pipes getting enabled

[ Upstream commit d21a3962d3042e6f56ad324cf18bdd64a1e6ecfa ]

We used to call intel_pre_plane_updates() for any pipe going through
a modeset whether the pipe was previously enabled or not. This in
fact needed to apply all the necessary clock gating workarounds/etc.
Restore the correct behaviour.

Fixes: 39919997322f ("drm/i915: Disable all planes before modesetting any pipes")
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231121054324.9988-3-ville.syrjala@linux.intel.com
(cherry picked from commit e0d5ce11ed0a21bb2bf328ad82fd261783c7ad88)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: rockchip: rk3128: Fix SCLK_SDMMC's clock name

[ Upstream commit 99fe9ee56bd2f7358f1bc72551c2f3a6bbddf80a ]

SCLK_SDMMC is the parent for SCLK_SDMMC_DRV and SCLK_SDMMC_SAMPLE, but
used with the (more) correct name sclk_sdmmc. SD card tuning does currently
fail as the parent can't be found under that name.
There is no need to suffix the name with '0' since RK312x SoCs do have a
single sdmmc controller - so rename it to the name which is already used
by it's children.

Fixes: f6022e88faca ("clk: rockchip: add clock controller for rk3128")
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Link: https://lore.kernel.org/r/20231127181415.11735-6-knaerzche@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: rockchip: rk3128: Fix aclk_peri_src's parent

[ Upstream commit 98dcc6be3859fb15257750b8e1d4e0eefd2c5e1e ]

According to the TRM there are no specific gpll_peri, cpll_peri,
gpll_div2_peri or gpll_div3_peri gates, but a single clk_peri_src gate.
Instead mux_clk_peri_src directly connects to the plls respectively the pll
divider clocks.
Fix this by creating a single gated composite.

Also rename all occurrences of aclk_peri_src to clk_peri_src, since it
is the parent for peri aclks, pclks and hclks. That name also matches
the one used in the TRM.

Fixes: f6022e88faca ("clk: rockchip: add clock controller for rk3128")
Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>
[renamed aclk_peri_src -> clk_peri_src and added commit message]
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Link: https://lore.kernel.org/r/20231127181415.11735-4-knaerzche@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

phy: sunplus: return negative error code in sp_usb_phy_probe

[ Upstream commit 2a9c713825b3127ece11984abf973672c9779518 ]

devm_phy_create() return negative error code, 'ret' should be
'PTR_ERR(phy)' rather than '-PTR_ERR(phy)'.

Fixes: 99d9ccd97385 ("phy: usb: Add USB2.0 phy driver for Sunplus SP7021")
Signed-off-by: Su Hui <suhui@nfschina.com>
Link: https://lore.kernel.org/r/20231120091046.163781-1-suhui@nfschina.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

phy: mediatek: mipi: mt8183: fix minimal supported frequency

[ Upstream commit 06f76e464ac81c6915430b7155769ea4ef16efe4 ]

The lowest supported clock frequency of the PHY is 125MHz (see also
mtk_mipi_tx_pll_enable()), but the clamping in .round_rate() has the
wrong minimal value, which will make the .enable() op return -EINVAL on
low frequencies. Fix the minimal clamping value.

Fixes: efda51a58b4a ("drm/mediatek: add mipi_tx driver for mt8183")
Signed-off-by: Michael Walle <mwalle@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20231123110202.2025585-1-mwalle@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iommu/vt-d: Support enforce_cache_coherency only for empty domains

[ Upstream commit e645c20e8e9cde549bc233435d3c1338e1cd27fe ]

The enforce_cache_coherency callback ensures DMA cache coherency for
devices attached to the domain.

Intel IOMMU supports enforced DMA cache coherency when the Snoop
Control bit in the IOMMU's extended capability register is set.
Supporting it differs between legacy and scalable modes.

In legacy mode, it's supported page-level by setting the SNP field
in second-stage page-table entries. In scalable mode, it's supported
in PASID-table granularity by setting the PGSNP field in PASID-table
entries.

In legacy mode, mappings before attaching to a device have SNP
fields cleared, while mappings after the callback have them set.
This means partial DMAs are cache coherent while others are not.

One possible fix is replaying mappings and flipping SNP bits when
attaching a domain to a device. But this seems to be over-engineered,
given that all real use cases just attach an empty domain to a device.

To meet practical needs while reducing mode differences, only support
enforce_cache_coherency on a domain without mappings if SNP field is
used.

Fixes: fc0051cb9590 ("iommu/vt-d: Check domain force_snooping against attached devices")
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20231114011036.70142-1-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iio: imu: adis16475: use bit numbers in assign_bit()

[ Upstream commit 1cd2fe4fd63e54b799a68c0856bda18f2e40caa8 ]

assign_bit() expects a bit number and not a mask like BIT(x). Hence,
just remove the BIT() macro from the #defines.

Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Closes: https://lore.kernel.org/r/202311060647.i9XyO4ej-lkp@intel.com/
Fixes: fff7352bf7a3ce ("iio: imu: Add support for adis16475")
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20231106150730.945-1-nuno.sa@analog.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dmaengine: fsl-edma: Add judgment on enabling round robin arbitration

[ Upstream commit 3448397a47c08c291c3fccb7ac5f0f429fd547e0 ]

Add judgment on enabling round robin arbitration to avoid
exceptions if this function is not supported.

Call trace:
 fsl_edma_resume_early+0x1d4/0x208
 dpm_run_callback+0xd4/0x304
 device_resume_early+0xb0/0x208
 dpm_resume_early+0x224/0x528
 suspend_devices_and_enter+0x3e4/0xd00
 pm_suspend+0x3c4/0x910
 state_store+0x90/0x124
 kobj_attr_store+0x48/0x64
 sysfs_kf_write+0x84/0xb4
 kernfs_fop_write_iter+0x19c/0x264
 vfs_write+0x664/0x858
 ksys_write+0xc8/0x180
 __arm64_sys_write+0x44/0x58
 invoke_syscall+0x5c/0x178
 el0_svc_common.constprop.0+0x11c/0x14c
 do_el0_svc+0x30/0x40
 el0_svc+0x58/0xa8
 el0t_64_sync_handler+0xc0/0xc4
 el0t_64_sync+0x190/0x194

Fixes: 72f5801a4e2b ("dmaengine: fsl-edma: integrate v3 support")
Signed-off-by: Xiaolei Wang <xiaolei.wang@windriver.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20231113225713.1892643-3-xiaolei.wang@windriver.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dmaengine: fsl-edma: Do not suspend and resume the masked dma channel when the system is sleeping

[ Upstream commit 2838a897654c4810153cc51646414ffa54fd23b0 ]

Some channels may be masked. When the system is suspended,
if these masked channels are not filtered out, this will
lead to null pointer operations and system crash:

Unable to handle kernel NULL pointer dereference at virtual address
Mem abort info:
ESR = 0x0000000096000004
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x04: level 0 translation fault
Data abort info:
ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000
CM = 0, WnR = 0, TnD = 0, TagAccess = 0
GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
user pgtable: 4k pages, 48-bit VAs, pgdp=0000000894300000
[00000000000002a0] pgd=0000000000000000, p4d=0000000000000000
Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP
Modules linked in:
CPU: 1 PID: 989 Comm: sh Tainted: G B 6.6.0-16203-g557fb7a3ec4c-dirty #70
Hardware name: Freescale i.MX8QM MEK (DT)
pstate: 400000c5 (nZcv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
  pc: fsl_edma_disable_request+0x3c/0x78
  lr: fsl_edma_disable_request+0x3c/0x78
  sp:ffff800089ae7690
  x29: ffff800089ae7690 x28: ffff000807ab5440 x27: ffff000807ab5830
  x26: 0000000000000008 x25: 0000000000000278 x24: 0000000000000001
  23: ffff000807ab4328 x22: 0000000000000000 x21: 0000000000000009
  x20: ffff800082616940 x19: 0000000000000000 x18: 0000000000000000
  x17: 3d3d3d3d3d3d3d3d x16: 3d3d3d3d3d3d3d3d x15: 3d3d3d3d3d3d3d3d
  x14: 3d3d3d3d3d3d3d3d x13: 3d3d3d3d3d3d3d3d x12: 1ffff00010d45724
  x11: ffff700010d45724 x10: dfff800000000000 x9: dfff800000000000
  x8: 00008fffef2ba8dc x7: 0000000000000001 x6: ffff800086a2b927
  x5: ffff800086a2b920 x4: ffff700010d45725 x3: ffff8000800d5bbc
  x2 : 0000000000000000 x1 : ffff000800c1d880 x0 : 0000000000000001
  Call trace:
   fsl_edma_disable_request+0x3c/0x78
   fsl_edma_suspend_late+0x128/0x12c
  dpm_run_callback+0xd4/0x304
   __device_suspend_late+0xd0/0x240
  dpm_suspend_late+0x174/0x59c
  suspend_devices_and_enter+0x194/0xd00
  pm_suspend+0x3c4/0x910

Fixes: 72f5801a4e2b ("dmaengine: fsl-edma: integrate v3 support")
Signed-off-by: Xiaolei Wang <xiaolei.wang@windriver.com>
Link: https://lore.kernel.org/r/20231113225713.1892643-2-xiaolei.wang@windriver.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dmaengine: ti: k3-psil-am62a: Fix SPI PDMA data

[ Upstream commit be37542afbfcd27b3bb99a135abf9b4736b96f75 ]

AM62Ax has 3 SPI channels where each channel has 4x TX and 4x RX
threads. Also fix the thread numbers to match what the firmware expects
according to the PSI-L device description.

Link: http://downloads.ti.com/tisci/esd/latest/5_soc_doc/am62ax/psil_cfg.html
Fixes: aac6db7e243a ("dmaengine: ti: k3-psil-am62a: Add AM62Ax PSIL and PDMA data")
Signed-off-by: Jai Luthra <j-luthra@ti.com>
Link: https://lore.kernel.org/r/20231123-psil_fix-v1-1-6604d80819be@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dmaengine: ti: k3-psil-am62: Fix SPI PDMA data

[ Upstream commit 744f5e7b69710701dc225020769138f8ca2894df ]

AM62x has 3 SPI channels where each channel has 4 TX and 4 RX threads.
This also fixes the thread numbers.

Signed-off-by: Ronald Wahl <ronald.wahl@raritan.com>
Fixes: 5ac6bfb58777 ("dmaengine: ti: k3-psil: Add AM62x PSIL and PDMA data")
Reviewed-by: Jai Luthra <j-luthra@ti.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://lore.kernel.org/r/20231030190113.16782-1-rwahl@gmx.de
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

phy: ti: gmii-sel: Fix register offset when parent is not a syscon node

[ Upstream commit 0f40d5099cd6d828fd7de6227d3eabe86016724c ]

When the node for this phy selector is a child node of a syscon node then the
property 'reg' is used as an offset into the parent regmap. When the node
is standalone and gets its own regmap this offset is pre-applied. So we need
to track which method was used to get the regmap and not apply the offset
in the standalone case.

Fixes: 1fdfa7cccd35 ("phy: ti: gmii-sel: Allow parent to not be syscon node")
Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/20231025143302.1265633-1-afd@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

KVM: s390: vsie: fix wrong VIR 37 when MSO is used

[ Upstream commit 80aea01c48971a1fffc0252d036995572d84950d ]

When the host invalidates a guest page, it will also check if the page
was used to map the prefix of any guest CPUs, in which case they are
stopped and marked as needing a prefix refresh. Upon starting the
affected CPUs again, their prefix pages are explicitly faulted in and
revalidated if they had been invalidated. A bit in the PGSTEs indicates
whether or not a page might contain a prefix. The bit is allowed to
overindicate. Pages above 2G are skipped, because they cannot be
prefixes, since KVM runs all guests with MSO = 0.

The same applies for nested guests (VSIE). When the host invalidates a
guest page that maps the prefix of the nested guest, it has to stop the
affected nested guest CPUs and mark them as needing a prefix refresh.
The same PGSTE bit used for the guest prefix is also used for the
nested guest. Pages above 2G are skipped like for normal guests, which
is the source of the bug.

The nested guest runs is the guest primary address space. The guest
could be running the nested guest using MSO != 0. If the MSO + prefix
for the nested guest is above 2G, the check for nested prefix will skip
it. This will cause the invalidation notifier to not stop the CPUs of
the nested guest and not mark them as needing refresh. When the nested
guest is run again, its prefix will not be refreshed, since it has not
been marked for refresh. This will cause a fatal validity intercept
with VIR code 37.

Fix this by removing the check for 2G for nested guests. Now all
invalidations of pages with the notify bit set will always scan the
existing VSIE shadow state descriptors.

This allows to catch invalidations of nested guest prefix mappings even
when the prefix is above 2G in the guest virtual address space.

Fixes: a3508fbe9dc6 ("KVM: s390: vsie: initial support for nested virtualization")
Tested-by: Nico Boehr <nrb@linux.ibm.com>
Reviewed-by: Nico Boehr <nrb@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-ID: <20231102153549.53984-1-imbrenda@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

riscv: don't probe unaligned access speed if already done

[ Upstream commit c20d36cc2a2073d4cdcda92bd7a1bb9b3b3b7c79 ]

If misaligned_access_speed percpu var isn't so called "HWPROBE
MISALIGNED UNKNOWN", it means the probe has happened(this is possible
for example, hotplug off then hotplug on one cpu), and the percpu var
has been set, don't probe again in this case.

Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Fixes: 584ea6564bca ("RISC-V: Probe for unaligned access speed")
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230912154040.3306-1-jszhang@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

rcu/tasks-trace: Handle new PF_IDLE semantics

[ Upstream commit a80712b9cc7e57830260ec5e1feb9cdb59e1da2f ]

The commit:

cff9b2332ab7 ("kernel/sched: Modify initial boot task idle setup")

has changed the semantics of what is to be considered an idle task in
such a way that the idle task of an offline CPU may not carry the
PF_IDLE flag anymore.

However RCU-tasks-trace tests the opposite assertion, still assuming
that idle tasks carry the PF_IDLE flag during their whole lifecycle.

Remove this assumption to avoid spurious warnings but keep the initial
test verifying that the idle task is the current task on any offline
CPU.

Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Fixes: cff9b2332ab7 ("kernel/sched: Modify initial boot task idle setup")
Suggested-by: Joel Fernandes <joel@joelfernandes.org>
Suggested-by: "Paul E. McKenney" <paulmck@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

rcu/tasks: Handle new PF_IDLE semantics

[ Upstream commit 9715ed501b585d47444865071674c961c0cc0020 ]

The commit:

cff9b2332ab7 ("kernel/sched: Modify initial boot task idle setup")

has changed the semantics of what is to be considered an idle task in
such a way that CPU boot code preceding the actual idle loop is excluded
from it.

This has however introduced new potential RCU-tasks stalls when either:

1) Grace period is started before init/0 had a chance to set PF_IDLE,
   keeping it stuck in the holdout list until idle ever schedules.

2) Grace period is started when some possible CPUs have never been
   online, keeping their idle tasks stuck in the holdout list until the
   CPU ever boots up.

3) Similar to 1) but with secondary CPUs: Grace period is started
   concurrently with secondary CPU booting, putting its idle task in
   the holdout list because PF_IDLE isn't yet observed on it. It stays
   then stuck in the holdout list until that CPU ever schedules. The
   effect is mitigated here by the hotplug AP thread that must run to
   bring the CPU up.

Fix this with handling the new semantics of PF_IDLE, keeping in mind
that it may or may not be set on an idle task. Take advantage of that to
strengthen the coverage of an RCU-tasks quiescent state within an idle
task, excluding the CPU boot code from it. Only the code running within
the idle loop is now a quiescent state, along with offline CPUs.

Fixes: cff9b2332ab7 ("kernel/sched: Modify initial boot task idle setup")
Suggested-by: Joel Fernandes <joel@joelfernandes.org>
Suggested-by: "Paul E. McKenney" <paulmck@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

rcu: Introduce rcu_cpu_online()

[ Upstream commit 2be4686d866ad5896f2bb94d82fe892197aea9c7 ]

Export the RCU point of view as to when a CPU is considered offline
(ie: when does RCU consider that a CPU is sufficiently down in the
hotplug process to not feature any possible read side).

This will be used by RCU-tasks whose vision of an offline CPU should
reasonably match the one of RCU core.

Fixes: cff9b2332ab7 ("kernel/sched: Modify initial boot task idle setup")
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>