Brian Gix [Mon, 6 Mar 2023 22:32:21 +0000 (14:32 -0800)]
Bluetooth: Remove "Power-on" check from Mesh feature
[ Upstream commit
52dd5e964a55c98c1b0bcf5fc737a5ddd00e7d4d ]
The Bluetooth mesh experimental feature enable was requiring the
controller to be powered off in order for the Enable to work. Mesh is
supposed to be enablable regardless of the controller state, and created
an unintended requirement that the mesh daemon be started before the
classic bluetoothd daemon.
Fixes:
af6bcc1921ff ("Bluetooth: Add experimental wrapper for MGMT based mesh")
Signed-off-by: Brian Gix <brian.gix@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Pauli Virtanen [Mon, 20 Feb 2023 19:38:24 +0000 (19:38 +0000)]
Bluetooth: ISO: fix timestamped HCI ISO data packet parsing
[ Upstream commit
2f10e40a948e8a2abe7f983df3959a333ca8955f ]
Use correct HCI ISO data packet header struct when the packet has
timestamp. The timestamp, when present, goes before the other fields
(Core v5.3 4E 5.4.5), so the structs are not compatible.
Fixes:
ccf74f2390d6 ("Bluetooth: Add BTPROTO_ISO socket type")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Luiz Augusto von Dentz [Fri, 24 Feb 2023 23:54:31 +0000 (15:54 -0800)]
Bluetooth: btusb: Remove detection of ISO packets over bulk
[ Upstream commit
efe375b716c1c1c9b52a816f5b933a95421020a2 ]
This removes the code introduced by
14202eff214e1e941fefa0366d4c3bc4b1a0d500 as hci_recv_frame is now able
to detect ACL packets that are in fact ISO packets.
Fixes:
14202eff214e ("Bluetooth: btusb: Detect if an ACL packet is in fact an ISO packet")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Luiz Augusto von Dentz [Fri, 24 Feb 2023 23:43:31 +0000 (15:43 -0800)]
Bluetooth: hci_core: Detect if an ACL packet is in fact an ISO packet
[ Upstream commit
876e78104f23ce9267822757a63562a609b126c3 ]
Because some transports don't have a dedicated type for ISO packets
(see
14202eff214e1e941fefa0366d4c3bc4b1a0d500) they may use ACL type
when in fact they are ISO packets.
In the past this was left for the driver to detect such thing but it
creates a problem when using the likes of btproxy when used by a VM as
the host would not be aware of the connection the guest is doing it
won't be able to detect such behavior, so this make bt_recv_frame
detect when it happens as it is the common interface to all drivers
including guest VMs.
Fixes:
14202eff214e ("Bluetooth: btusb: Detect if an ACL packet is in fact an ISO packet")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Zhengping Jiang [Wed, 22 Feb 2023 00:17:56 +0000 (16:17 -0800)]
Bluetooth: hci_sync: Resume adv with no RPA when active scan
[ Upstream commit
3c44a431d62bf4a20d7b901f98266ae3f4676d48 ]
The address resolution should be disabled during the active scan,
so all the advertisements can reach the host. The advertising
has to be paused before disabling the address resolution,
because the advertising will prevent any changes to the resolving
list and the address resolution status. Skipping this will cause
the hci error and the discovery failure.
According to the bluetooth specification:
"7.8.44 LE Set Address Resolution Enable command
This command shall not be used when:
- Advertising (other than periodic advertising) is enabled,
- Scanning is enabled, or
- an HCI_LE_Create_Connection, HCI_LE_Extended_Create_Connection, or
HCI_LE_Periodic_Advertising_Create_Sync command is outstanding."
If the host is using RPA, the controller needs to generate RPA for
the advertising, so the advertising must remain paused during the
active scan.
If the host is not using RPA, the advertising can be resumed after
disabling the address resolution.
Fixes:
9afc675edeeb ("Bluetooth: hci_sync: allow advertise when scan without RPA")
Signed-off-by: Zhengping Jiang <jiangzp@google.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
ChenXiaoSong [Thu, 2 Mar 2023 13:58:04 +0000 (21:58 +0800)]
ksmbd: fix possible refcount leak in smb2_open()
[ Upstream commit
2624b445544ffc1472ccabfb6ec867c199d4c95c ]
Reference count of acls will leak when memory allocation fails. Fix this
by adding the missing posix_acl_release().
Fixes:
e2f34481b24d ("cifsd: add server-side procedures for SMB3")
Signed-off-by: ChenXiaoSong <chenxiaosong2@huawei.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Namjae Jeon [Tue, 7 Mar 2023 12:56:07 +0000 (21:56 +0900)]
ksmbd: add low bound validation to FSCTL_QUERY_ALLOCATED_RANGES
[ Upstream commit
342edb60dcda7a409430359b0cac2864bb9dfe44 ]
Smatch static checker warning:
fs/ksmbd/vfs.c:1040 ksmbd_vfs_fqar_lseek() warn: no lower bound on 'length'
fs/ksmbd/vfs.c:1041 ksmbd_vfs_fqar_lseek() warn: no lower bound on 'start'
Fix unexpected result that could caused from negative start and length.
Fixes:
f44158485826 ("cifsd: add file operations")
Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Namjae Jeon [Sun, 5 Mar 2023 12:04:00 +0000 (21:04 +0900)]
ksmbd: add low bound validation to FSCTL_SET_ZERO_DATA
[ Upstream commit
2d74ec97131b1179a373b6d521f195c84e894eb6 ]
Smatch static checker warning:
fs/ksmbd/smb2pdu.c:7759 smb2_ioctl()
warn: no lower bound on 'off'
Fix unexpected result that could caused from negative off and bfz.
Fixes:
b5e5f9dfc915 ("ksmbd: check invalid FileOffset and BeyondFinalZero in FSCTL_ZERO_DATA")
Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Roger Pau Monne [Wed, 30 Nov 2022 15:09:11 +0000 (16:09 +0100)]
hvc/xen: prevent concurrent accesses to the shared ring
[ Upstream commit
6214894f49a967c749ee6c07cb00f9cede748df4 ]
The hvc machinery registers both a console and a tty device based on
the hv ops provided by the specific implementation. Those two
interfaces however have different locks, and there's no single locks
that's shared between the tty and the console implementations, hence
the driver needs to protect itself against concurrent accesses.
Otherwise concurrent calls using the split interfaces are likely to
corrupt the ring indexes, leaving the console unusable.
Introduce a lock to xencons_info to serialize accesses to the shared
ring. This is only required when using the shared memory console,
concurrent accesses to the hypercall based console implementation are
not an issue.
Note the conditional logic in domU_read_console() is slightly modified
so the notify_daemon() call can be done outside of the locked region:
it's an hypercall and there's no need for it to be done with the lock
held.
Fixes:
b536b4b96230 ('xen: use the hvc console infrastructure for Xen console')
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20221130150919.13935-1-roger.pau@citrix.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ido Schimmel [Tue, 21 Mar 2023 11:42:00 +0000 (12:42 +0100)]
mlxsw: spectrum_fid: Fix incorrect local port type
[ Upstream commit
bb765a743377d46d8da8e7f7e5128022504741b9 ]
Local port is a 10-bit number, but it was mistakenly stored in a u8,
resulting in firmware errors when using a netdev corresponding to a
local port higher than 255.
Fix by storing the local port in u16, as is done in the rest of the
code.
Fixes:
bf73904f5fba ("mlxsw: Add support for 802.1Q FID family")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/eace1f9d96545ab8a2775db857cb7e291a9b166b.1679398549.git.petrm@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Caleb Sander [Mon, 20 Mar 2023 15:57:36 +0000 (09:57 -0600)]
nvme-tcp: fix nvme_tcp_term_pdu to match spec
[ Upstream commit
aa01c67de5926fdb276793180564f172c55fb0d7 ]
The FEI field of C2HTermReq/H2CTermReq is 4 bytes but not 4-byte-aligned
in the NVMe/TCP specification (it is located at offset 10 in the PDU).
Split it into two 16-bit integers in struct nvme_tcp_term_pdu
so no padding is inserted. There should also be 10 reserved bytes after.
There are currently no users of this type.
Fixes:
fc221d05447aa6db ("nvme-tcp: Add protocol header")
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Caleb Sander <csander@purestorage.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Zhang Changzhong [Tue, 21 Mar 2023 03:45:43 +0000 (14:45 +1100)]
net/sonic: use dma_mapping_error() for error check
[ Upstream commit
4107b8746d93ace135b8c4da4f19bbae81db785f ]
The DMA address returned by dma_map_single() should be checked with
dma_mapping_error(). Fix it accordingly.
Fixes:
efcce839360f ("[PATCH] macsonic/jazzsonic network drivers update")
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Finn Thain <fthain@linux-m68k.org>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/6645a4b5c1e364312103f48b7b36783b94e197a2.1679370343.git.fthain@linux-m68k.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Eric Dumazet [Mon, 20 Mar 2023 16:34:27 +0000 (16:34 +0000)]
erspan: do not use skb_mac_header() in ndo_start_xmit()
[ Upstream commit
8e50ed774554f93d55426039b27b1e38d7fa64d8 ]
Drivers should not assume skb_mac_header(skb) == skb->data in their
ndo_start_xmit().
Use skb_network_offset() and skb_transport_offset() which
better describe what is needed in erspan_fb_xmit() and
ip6erspan_tunnel_xmit()
syzbot reported:
WARNING: CPU: 0 PID: 5083 at include/linux/skbuff.h:2873 skb_mac_header include/linux/skbuff.h:2873 [inline]
WARNING: CPU: 0 PID: 5083 at include/linux/skbuff.h:2873 ip6erspan_tunnel_xmit+0x1d9c/0x2d90 net/ipv6/ip6_gre.c:962
Modules linked in:
CPU: 0 PID: 5083 Comm: syz-executor406 Not tainted 6.3.0-rc2-syzkaller-00866-gd4671cb96fa3 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/02/2023
RIP: 0010:skb_mac_header include/linux/skbuff.h:2873 [inline]
RIP: 0010:ip6erspan_tunnel_xmit+0x1d9c/0x2d90 net/ipv6/ip6_gre.c:962
Code: 04 02 41 01 de 84 c0 74 08 3c 03 0f 8e 1c 0a 00 00 45 89 b4 24 c8 00 00 00 c6 85 77 fe ff ff 01 e9 33 e7 ff ff e8 b4 27 a1 f8 <0f> 0b e9 b6 e7 ff ff e8 a8 27 a1 f8 49 8d bf f0 0c 00 00 48 b8 00
RSP: 0018:
ffffc90003b2f830 EFLAGS:
00010293
RAX:
0000000000000000 RBX:
000000000000ffff RCX:
0000000000000000
RDX:
ffff888021273a80 RSI:
ffffffff88e1bd4c RDI:
0000000000000003
RBP:
ffffc90003b2f9d8 R08:
0000000000000003 R09:
000000000000ffff
R10:
000000000000ffff R11:
0000000000000000 R12:
ffff88802b28da00
R13:
00000000000000d0 R14:
ffff88807e25b6d0 R15:
ffff888023408000
FS:
0000555556a61300(0000) GS:
ffff8880b9800000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
000055e5b11eb6e8 CR3:
0000000027c1b000 CR4:
00000000003506f0
DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
Call Trace:
<TASK>
__netdev_start_xmit include/linux/netdevice.h:4900 [inline]
netdev_start_xmit include/linux/netdevice.h:4914 [inline]
__dev_direct_xmit+0x504/0x730 net/core/dev.c:4300
dev_direct_xmit include/linux/netdevice.h:3088 [inline]
packet_xmit+0x20a/0x390 net/packet/af_packet.c:285
packet_snd net/packet/af_packet.c:3075 [inline]
packet_sendmsg+0x31a0/0x5150 net/packet/af_packet.c:3107
sock_sendmsg_nosec net/socket.c:724 [inline]
sock_sendmsg+0xde/0x190 net/socket.c:747
__sys_sendto+0x23a/0x340 net/socket.c:2142
__do_sys_sendto net/socket.c:2154 [inline]
__se_sys_sendto net/socket.c:2150 [inline]
__x64_sys_sendto+0xe1/0x1b0 net/socket.c:2150
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7f123aaa1039
Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 b1 14 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 c0 ff ff ff f7 d8 64 89 01 48
RSP: 002b:
00007ffc15d12058 EFLAGS:
00000246 ORIG_RAX:
000000000000002c
RAX:
ffffffffffffffda RBX:
0000000000000000 RCX:
00007f123aaa1039
RDX:
0000000000000000 RSI:
0000000000000000 RDI:
0000000000000003
RBP:
0000000000000000 R08:
0000000020000040 R09:
0000000000000014
R10:
0000000000000000 R11:
0000000000000246 R12:
00007f123aa648c0
R13:
431bde82d7b634db R14:
0000000000000000 R15:
0000000000000000
Fixes:
1baf5ebf8954 ("erspan: auto detect truncated packets.")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230320163427.8096-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Li Zetao [Mon, 20 Mar 2023 14:33:18 +0000 (14:33 +0000)]
atm: idt77252: fix kmemleak when rmmod idt77252
[ Upstream commit
4fe3c88552a3fbe1944426a4506a18cdeb457b5a ]
There are memory leaks reported by kmemleak:
unreferenced object 0xffff888106500800 (size 128):
comm "modprobe", pid 1017, jiffies
4297787785 (age 67.152s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<
00000000970ce626>] __kmem_cache_alloc_node+0x20c/0x380
[<
00000000fb5f78d9>] kmalloc_trace+0x2f/0xb0
[<
000000000e947e2a>] idt77252_init_one+0x2847/0x3c90 [idt77252]
[<
000000006efb048e>] local_pci_probe+0xeb/0x1a0
...
unreferenced object 0xffff888106500b00 (size 128):
comm "modprobe", pid 1017, jiffies
4297787785 (age 67.152s)
hex dump (first 32 bytes):
00 20 3d 01 80 88 ff ff 00 20 3d 01 80 88 ff ff . =...... =.....
f0 23 3d 01 80 88 ff ff 00 20 3d 01 00 00 00 00 .#=...... =.....
backtrace:
[<
00000000970ce626>] __kmem_cache_alloc_node+0x20c/0x380
[<
00000000fb5f78d9>] kmalloc_trace+0x2f/0xb0
[<
00000000f451c5be>] alloc_scq.constprop.0+0x4a/0x400 [idt77252]
[<
00000000e6313849>] idt77252_init_one+0x28cf/0x3c90 [idt77252]
The root cause is traced to the vc_maps which alloced in open_card_oam()
are not freed in close_card_oam(). The vc_maps are used to record
open connections, so when close a vc_map in close_card_oam(), the memory
should be freed. Moreover, the ubr0 is not closed when close a idt77252
device, leading to the memory leak of vc_map and scq_info.
Fix them by adding kfree in close_card_oam() and implementing new
close_card_ubr0() to close ubr0.
Fixes:
1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Reviewed-by: Francois Romieu <romieu@fr.zoreil.com>
Link: https://lore.kernel.org/r/20230320143318.2644630-1-lizetao1@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Álvaro Fernández Rojas [Sun, 19 Mar 2023 09:55:40 +0000 (10:55 +0100)]
net: dsa: tag_brcm: legacy: fix daisy-chained switches
[ Upstream commit
032a954061afd4b7426c3eb6bfd2952ef1e9a384 ]
When BCM63xx internal switches are connected to switches with a 4-byte
Broadcom tag, it does not identify the packet as VLAN tagged, so it adds one
based on its PVID (which is likely 0).
Right now, the packet is received by the BCM63xx internal switch and the 6-byte
tag is properly processed. The next step would to decode the corresponding
4-byte tag. However, the internal switch adds an invalid VLAN tag after the
6-byte tag and the 4-byte tag handling fails.
In order to fix this we need to remove the invalid VLAN tag after the 6-byte
tag before passing it to the 4-byte tag decoding.
Fixes:
964dbf186eaa ("net: dsa: tag_brcm: add support for legacy tags")
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20230319095540.239064-1-noltari@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dan Carpenter [Mon, 27 Feb 2023 11:16:10 +0000 (14:16 +0300)]
net/mlx5: E-Switch, Fix an Oops in error handling code
[ Upstream commit
640fcdbcf27fc62de9223f958ceb4e897a00e791 ]
The error handling dereferences "vport". There is nothing we can do if
it is an error pointer except returning the error code.
Fixes:
133dcfc577ea ("net/mlx5: E-Switch, Alloc and free unique metadata for match")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Maher Sanalla [Wed, 15 Mar 2023 09:04:38 +0000 (11:04 +0200)]
net/mlx5: Read the TC mapping of all priorities on ETS query
[ Upstream commit
44d553188c38ac74b799dfdcebafef2f7bb70942 ]
When ETS configurations are queried by the user to get the mapping
assignment between packet priority and traffic class, only priorities up
to maximum TCs are queried from QTCT register in FW to retrieve their
assigned TC, leaving the rest of the priorities mapped to the default
TC #0 which might be misleading.
Fix by querying the TC mapping of all priorities on each ETS query,
regardless of the maximum number of TCs configured in FW.
Fixes:
820c2c5e773d ("net/mlx5e: Read ETS settings directly from firmware")
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Emeel Hakim [Mon, 20 Mar 2023 11:13:55 +0000 (13:13 +0200)]
net/mlx5e: Overcome slow response for first macsec ASO WQE
[ Upstream commit
7e3fce82d945cf6e7f99034b113ff2d250d7524d ]
First ASO WQE poll causes a cache miss in hardware hence the resut is
delayed. It causes to the situation where such WQE is polled earlier
than it is needed.
Add logic to retry ASO CQ polling operation.
Fixes:
739cfa34518e ("net/mlx5: Make ASO poll CQ usable in atomic context")
Signed-off-by: Emeel Hakim <ehakim@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Lama Kayal [Tue, 31 Jan 2023 12:07:03 +0000 (14:07 +0200)]
net/mlx5: Fix steering rules cleanup
[ Upstream commit
922f56e9a795d6f3dd72d3428ebdd7ee040fa855 ]
vport's mc, uc and multicast rules are not deleted in teardown path when
EEH happens. Since the vport's promisc settings(uc, mc and all) in
firmware are reset after EEH, mlx5 driver will try to delete the above
rules in the initialization path. This cause kernel crash because these
software rules are no longer valid.
Fix by nullifying these rules right after delete to avoid accessing any dangling
pointers.
Call Trace:
__list_del_entry_valid+0xcc/0x100 (unreliable)
tree_put_node+0xf4/0x1b0 [mlx5_core]
tree_remove_node+0x30/0x70 [mlx5_core]
mlx5_del_flow_rules+0x14c/0x1f0 [mlx5_core]
esw_apply_vport_rx_mode+0x10c/0x200 [mlx5_core]
esw_update_vport_rx_mode+0xb4/0x180 [mlx5_core]
esw_vport_change_handle_locked+0x1ec/0x230 [mlx5_core]
esw_enable_vport+0x130/0x260 [mlx5_core]
mlx5_eswitch_enable_sriov+0x2a0/0x2f0 [mlx5_core]
mlx5_device_enable_sriov+0x74/0x440 [mlx5_core]
mlx5_load_one+0x114c/0x1550 [mlx5_core]
mlx5_pci_resume+0x68/0xf0 [mlx5_core]
eeh_report_resume+0x1a4/0x230
eeh_pe_dev_traverse+0x98/0x170
eeh_handle_normal_event+0x3e4/0x640
eeh_handle_event+0x4c/0x370
eeh_event_handler+0x14c/0x210
kthread+0x168/0x1b0
ret_from_kernel_thread+0x5c/0x84
Fixes:
a35f71f27a61 ("net/mlx5: E-Switch, Implement promiscuous rx modes vf request handling")
Signed-off-by: Huy Nguyen <huyn@mellanox.com>
Signed-off-by: Lama Kayal <lkayal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Gavin Li [Thu, 9 Feb 2023 10:48:52 +0000 (12:48 +0200)]
net/mlx5e: Block entering switchdev mode with ns inconsistency
[ Upstream commit
662404b24a4c4d839839ed25e3097571f5938b9b ]
Upon entering switchdev mode, VF/SF representors are spawned in the
devlink instance's net namespace, whereas the PF net device transforms
into the uplink representor, remaining in the net namespace the PF net
device was in. Therefore, if a PF net device's namespace is different from
its parent devlink net namespace, entering switchdev mode can create an
illegal situation where all representors sharing the same core device
are NOT in the same net namespace.
To avoid this issue, block entering switchdev mode for devices whose child
netdev net namespace has diverged from the parent devlink's.
Fixes:
7768d1971de6 ("net/mlx5: E-Switch, Add control for encapsulation")
Signed-off-by: Gavin Li <gavinl@nvidia.com>
Reviewed-by: Gavi Teitz <gavi@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Gavin Li [Fri, 25 Nov 2022 02:15:40 +0000 (04:15 +0200)]
net/mlx5e: Set uplink rep as NETNS_LOCAL
[ Upstream commit
c83172b0639c8a005c0dd3b36252dc22ddd9f19c ]
Previously, NETNS_LOCAL was not set for uplink representors, inconsistent
with VF representors, and allowed the uplink representor to be moved
between net namespaces and separated from the VF representors it shares
the core device with. Such usage would break the isolation model of
namespaces, as devices in different namespaces would have access to
shared memory.
To solve this issue, set NETNS_LOCAL for uplink representors if eswitch is
in switchdev mode.
Fixes:
7a9fb35e8c3a ("net/mlx5e: Do not reload ethernet ports when changing eswitch mode")
Signed-off-by: Gavin Li <gavinl@nvidia.com>
Reviewed-by: Gavi Teitz <gavi@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Daniel Borkmann [Mon, 20 Mar 2023 14:37:25 +0000 (15:37 +0100)]
bpf: Adjust insufficient default bpf_jit_limit
[ Upstream commit
10ec8ca8ec1a2f04c4ed90897225231c58c124a7 ]
We've seen recent AWS EKS (Kubernetes) user reports like the following:
After upgrading EKS nodes from v20230203 to v20230217 on our 1.24 EKS
clusters after a few days a number of the nodes have containers stuck
in ContainerCreating state or liveness/readiness probes reporting the
following error:
Readiness probe errored: rpc error: code = Unknown desc = failed to
exec in container: failed to start exec "
4a11039f730203ffc003b7[...]":
OCI runtime exec failed: exec failed: unable to start container process:
unable to init seccomp: error loading seccomp filter into kernel:
error loading seccomp filter: errno 524: unknown
However, we had not been seeing this issue on previous AMIs and it only
started to occur on v20230217 (following the upgrade from kernel 5.4 to
5.10) with no other changes to the underlying cluster or workloads.
We tried the suggestions from that issue (sysctl net.core.bpf_jit_limit=
452534528)
which helped to immediately allow containers to be created and probes to
execute but after approximately a day the issue returned and the value
returned by cat /proc/vmallocinfo | grep bpf_jit | awk '{s+=$2} END {print s}'
was steadily increasing.
I tested bpf tree to observe bpf_jit_charge_modmem, bpf_jit_uncharge_modmem
their sizes passed in as well as bpf_jit_current under tcpdump BPF filter,
seccomp BPF and native (e)BPF programs, and the behavior all looks sane
and expected, that is nothing "leaking" from an upstream perspective.
The bpf_jit_limit knob was originally added in order to avoid a situation
where unprivileged applications loading BPF programs (e.g. seccomp BPF
policies) consuming all the module memory space via BPF JIT such that loading
of kernel modules would be prevented. The default limit was defined back in
2018 and while good enough back then, we are generally seeing far more BPF
consumers today.
Adjust the limit for the BPF JIT pool from originally 1/4 to now 1/2 of the
module memory space to better reflect today's needs and avoid more users
running into potentially hard to debug issues.
Fixes:
fdadd04931c2 ("bpf: fix bpf_jit_limit knob for PAGE_SIZE >= 64K")
Reported-by: Stephen Haynes <sh@synk.net>
Reported-by: Lefteris Alexakis <lefteris.alexakis@kpn.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://github.com/awslabs/amazon-eks-ami/issues/1179
Link: https://github.com/awslabs/amazon-eks-ami/issues/1219
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20230320143725.8394-1-daniel@iogearbox.net
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Radoslaw Tyl [Mon, 13 Mar 2023 14:07:33 +0000 (15:07 +0100)]
i40e: fix flow director packet filter programming
[ Upstream commit
c672297bbc0e86dbf88396b8053e2fbb173f16ff ]
Initialize to zero structures to build a valid
Tx Packet used for the filter programming.
Fixes:
a9219b332f52 ("i40e: VLAN field for flow director")
Signed-off-by: Radoslaw Tyl <radoslawx.tyl@intel.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Arpana Arland <arpanax.arland@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Stefan Assmann [Mon, 13 Mar 2023 16:06:45 +0000 (17:06 +0100)]
iavf: fix hang on reboot with ice
[ Upstream commit
4e264be98b88a6d6f476c11087fe865696e8bef5 ]
When a system with E810 with existing VFs gets rebooted the following
hang may be observed.
Pid 1 is hung in iavf_remove(), part of a network driver:
PID: 1 TASK:
ffff965400e5a340 CPU: 24 COMMAND: "systemd-shutdow"
#0 [
ffffaad04005fa50] __schedule at
ffffffff8b3239cb
#1 [
ffffaad04005fae8] schedule at
ffffffff8b323e2d
#2 [
ffffaad04005fb00] schedule_hrtimeout_range_clock at
ffffffff8b32cebc
#3 [
ffffaad04005fb80] usleep_range_state at
ffffffff8b32c930
#4 [
ffffaad04005fbb0] iavf_remove at
ffffffffc12b9b4c [iavf]
#5 [
ffffaad04005fbf0] pci_device_remove at
ffffffff8add7513
#6 [
ffffaad04005fc10] device_release_driver_internal at
ffffffff8af08baa
#7 [
ffffaad04005fc40] pci_stop_bus_device at
ffffffff8adcc5fc
#8 [
ffffaad04005fc60] pci_stop_and_remove_bus_device at
ffffffff8adcc81e
#9 [
ffffaad04005fc70] pci_iov_remove_virtfn at
ffffffff8adf9429
#10 [
ffffaad04005fca8] sriov_disable at
ffffffff8adf98e4
#11 [
ffffaad04005fcc8] ice_free_vfs at
ffffffffc04bb2c8 [ice]
#12 [
ffffaad04005fd10] ice_remove at
ffffffffc04778fe [ice]
#13 [
ffffaad04005fd38] ice_shutdown at
ffffffffc0477946 [ice]
#14 [
ffffaad04005fd50] pci_device_shutdown at
ffffffff8add58f1
#15 [
ffffaad04005fd70] device_shutdown at
ffffffff8af05386
#16 [
ffffaad04005fd98] kernel_restart at
ffffffff8a92a870
#17 [
ffffaad04005fda8] __do_sys_reboot at
ffffffff8a92abd6
#18 [
ffffaad04005fee0] do_syscall_64 at
ffffffff8b317159
#19 [
ffffaad04005ff08] __context_tracking_enter at
ffffffff8b31b6fc
#20 [
ffffaad04005ff18] syscall_exit_to_user_mode at
ffffffff8b31b50d
#21 [
ffffaad04005ff28] do_syscall_64 at
ffffffff8b317169
#22 [
ffffaad04005ff50] entry_SYSCALL_64_after_hwframe at
ffffffff8b40009b
RIP:
00007f1baa5c13d7 RSP:
00007fffbcc55a98 RFLAGS:
00000202
RAX:
ffffffffffffffda RBX:
0000000000000000 RCX:
00007f1baa5c13d7
RDX:
0000000001234567 RSI:
0000000028121969 RDI:
00000000fee1dead
RBP:
00007fffbcc55ca0 R8:
0000000000000000 R9:
00007fffbcc54e90
R10:
00007fffbcc55050 R11:
0000000000000202 R12:
0000000000000005
R13:
0000000000000000 R14:
00007fffbcc55af0 R15:
0000000000000000
ORIG_RAX:
00000000000000a9 CS: 0033 SS: 002b
During reboot all drivers PM shutdown callbacks are invoked.
In iavf_shutdown() the adapter state is changed to __IAVF_REMOVE.
In ice_shutdown() the call chain above is executed, which at some point
calls iavf_remove(). However iavf_remove() expects the VF to be in one
of the states __IAVF_RUNNING, __IAVF_DOWN or __IAVF_INIT_FAILED. If
that's not the case it sleeps forever.
So if iavf_shutdown() gets invoked before iavf_remove() the system will
hang indefinitely because the adapter is already in state __IAVF_REMOVE.
Fix this by returning from iavf_remove() if the state is __IAVF_REMOVE,
as we already went through iavf_shutdown().
Fixes:
974578017fc1 ("iavf: Add waiting so the port is initialized in remove")
Fixes:
a8417330f8a5 ("iavf: Fix race condition between iavf_shutdown and iavf_remove")
Reported-by: Marius Cornea <mcornea@redhat.com>
Signed-off-by: Stefan Assmann <sassmann@kpanic.de>
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Michal Swiatkowski [Fri, 10 Mar 2023 11:33:44 +0000 (12:33 +0100)]
ice: check if VF exists before mode check
[ Upstream commit
83b49e7f63da88a1544cba2b2e40bfabb24bd203 ]
Setting trust on VF should return EINVAL when there is no VF. Move
checking for switchdev mode after checking if VF exists.
Fixes:
c54d209c78b8 ("ice: Wait for VF to be reset/ready before configuration")
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@intel.com>
Signed-off-by: Kalyan Kodamagula <kalyan.kodamagula@intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
David Howells [Tue, 14 Mar 2023 15:15:18 +0000 (15:15 +0000)]
keys: Do not cache key in task struct if key is requested from kernel thread
[ Upstream commit
47f9e4c924025c5be87959d3335e66fcbb7f6b5c ]
The key which gets cached in task structure from a kernel thread does not
get invalidated even after expiry. Due to which, a new key request from
kernel thread will be served with the cached key if it's present in task
struct irrespective of the key validity. The change is to not cache key in
task_struct when key requested from kernel thread so that kernel thread
gets a valid key on every key request.
The problem has been seen with the cifs module doing DNS lookups from a
kernel thread and the results getting pinned by being attached to that
kernel thread's cache - and thus not something that can be easily got rid
of. The cache would ordinarily be cleared by notify-resume, but kernel
threads don't do that.
This isn't seen with AFS because AFS is doing request_key() within the
kernel half of a user thread - which will do notify-resume.
Fixes:
7743c48e54ee ("keys: Cache result of request_key*() temporarily in task_struct")
Signed-off-by: Bharath SM <bharathsm@microsoft.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
cc: Shyam Prasad N <nspmangalore@gmail.com>
cc: Steve French <smfrench@gmail.com>
cc: keyrings@vger.kernel.org
cc: linux-cifs@vger.kernel.org
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/CAGypqWw951d=zYRbdgNR4snUDvJhWL=q3=WOyh7HhSJupjz2vA@mail.gmail.com/
Signed-off-by: Sasha Levin <sashal@kernel.org>
Masami Hiramatsu (Google) [Wed, 15 Mar 2023 13:54:08 +0000 (22:54 +0900)]
bootconfig: Fix testcase to increase max node
[ Upstream commit
b69245126a48e50882021180fa5d264dc7149ccc ]
Since commit
6c40624930c5 ("bootconfig: Increase max nodes of bootconfig
from 1024 to 8192 for DCC support") increased the max number of bootconfig
node to 8192, the bootconfig testcase of the max number of nodes fails.
To fix this issue, we can not simply increase the number in the test script
because the test bootconfig file becomes too big (>32KB). To fix that, we
can use a combination of three alphabets (26^3 = 17576). But with that,
we can not express the 8193 (just one exceed from the limitation) because
it also exceeds the max size of bootconfig. So, the first 26 nodes will just
use one alphabet.
With this fix, test-bootconfig.sh passes all tests.
Link: https://lore.kernel.org/all/167888844790.791176.670805252426835131.stgit@devnote2/
Reported-by: Heinz Wiesinger <pprkut@slackware.com>
Link: https://lore.kernel.org/all/2463802.XAFRqVoOGU@amaterasu.liwjatan.org
Fixes:
6c40624930c5 ("bootconfig: Increase max nodes of bootconfig from 1024 to 8192 for DCC support")
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jiasheng Jiang [Fri, 17 Mar 2023 06:43:37 +0000 (14:43 +0800)]
octeontx2-vf: Add missing free for alloc_percpu
[ Upstream commit
f038f3917baf04835ba2b7bcf2a04ac93fbf8a9c ]
Add the free_percpu for the allocated "vf->hw.lmt_info" in order to avoid
memory leak, same as the "pf->hw.lmt_info" in
`drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c`.
Fixes:
5c0512072f65 ("octeontx2-pf: cn10k: Use runtime allocated LMTLINE region")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Acked-by: Geethasowjanya Akula <gakula@marvell.com>
Link: https://lore.kernel.org/r/20230317064337.18198-1-jiasheng@iscas.ac.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Geoff Levand [Sat, 18 Mar 2023 17:39:16 +0000 (17:39 +0000)]
net/ps3_gelic_net: Use dma_mapping_error
[ Upstream commit
bebe933d35a63d4f042fbf4dce4f22e689ba0fcd ]
The current Gelic Etherenet driver was checking the return value of its
dma_map_single call, and not using the dma_mapping_error() routine.
Fixes runtime problems like these:
DMA-API: ps3_gelic_driver sb_05: device driver failed to check map error
WARNING: CPU: 0 PID: 0 at kernel/dma/debug.c:1027 .check_unmap+0x888/0x8dc
Fixes:
02c1889166b4 ("ps3: gigabit ethernet driver for PS3, take3")
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Signed-off-by: Geoff Levand <geoff@infradead.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Geoff Levand [Sat, 18 Mar 2023 17:39:16 +0000 (17:39 +0000)]
net/ps3_gelic_net: Fix RX sk_buff length
[ Upstream commit
19b3bb51c3bc288b3f2c6f8c4450b0f548320625 ]
The Gelic Ethernet device needs to have the RX sk_buffs aligned to
GELIC_NET_RXBUF_ALIGN, and also the length of the RX sk_buffs must
be a multiple of GELIC_NET_RXBUF_ALIGN.
The current Gelic Ethernet driver was not allocating sk_buffs large
enough to allow for this alignment.
Also, correct the maximum and minimum MTU sizes, and add a new
preprocessor macro for the maximum frame size, GELIC_NET_MAX_FRAME.
Fixes various randomly occurring runtime network errors.
Fixes:
02c1889166b4 ("ps3: gigabit ethernet driver for PS3, take3")
Signed-off-by: Geoff Levand <geoff@infradead.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Szymon Heidrich [Sat, 18 Mar 2023 09:25:52 +0000 (10:25 +0100)]
net: usb: lan78xx: Limit packet length to skb->len
[ Upstream commit
7f247f5a2c18b3f21206cdd51193df4f38e1b9f5 ]
Packet length retrieved from descriptor may be larger than
the actual socket buffer length. In such case the cloned
skb passed up the network stack will leak kernel memory contents.
Additionally prevent integer underflow when size is less than
ETH_FCS_LEN.
Fixes:
55d7de9de6c3 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver")
Signed-off-by: Szymon Heidrich <szymon.heidrich@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Zheng Wang [Sat, 18 Mar 2023 08:05:26 +0000 (16:05 +0800)]
net: qcom/emac: Fix use after free bug in emac_remove due to race condition
[ Upstream commit
6b6bc5b8bd2d4ca9e1efa9ae0f98a0b0687ace75 ]
In emac_probe, &adpt->work_thread is bound with
emac_work_thread. Then it will be started by timeout
handler emac_tx_timeout or a IRQ handler emac_isr.
If we remove the driver which will call emac_remove
to make cleanup, there may be a unfinished work.
The possible sequence is as follows:
Fix it by finishing the work before cleanup in the emac_remove
and disable timeout response.
CPU0 CPU1
|emac_work_thread
emac_remove |
free_netdev |
kfree(netdev); |
|emac_reinit_locked
|emac_mac_down
|//use netdev
Fixes:
b9b17debc69d ("net: emac: emac gigabit ethernet controller driver")
Signed-off-by: Zheng Wang <zyytlz.wz@163.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Andrzej Hajda [Tue, 14 Mar 2023 15:19:20 +0000 (16:19 +0100)]
drm/i915/gt: perform uc late init after probe error injection
[ Upstream commit
150784f9285e656373cf3953ef4a7663f1e1a0f2 ]
Probe pseudo errors should be injected only in places where real errors
can be encountered, otherwise unwinding code can be broken.
Placing intel_uc_init_late before i915_inject_probe_error violated
this rule, resulting in following bug:
__intel_gt_disable:655 GEM_BUG_ON(intel_gt_pm_is_awake(gt))
Fixes:
481d458caede ("drm/i915/guc: Add golden context to GuC ADS")
Acked-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andrzej Hajda <andrzej.hajda@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230314151920.1065847-1-andrzej.hajda@intel.com
(cherry picked from commit
c4252a11131c7f27a158294241466e2a4e7ff94e)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
John Harrison [Sat, 11 Mar 2023 06:37:12 +0000 (22:37 -0800)]
drm/i915/guc: Fix missing ecodes
[ Upstream commit
8df23e4c4f72f4e201c28e6fb0a67e2dbf30628a ]
Error captures are tagged with an 'ecode'. This is a pseduo-unique magic
number that is meant to distinguish similar seeming bugs with
different underlying signatures. It is a combination of two ring state
registers. Unfortunately, the register state being used is only valid
in execlist mode. In GuC mode, the register state exists in a separate
list of arbitrary register address/value pairs rather than the named
entry structure. So, search through that list to find the two exciting
registers and copy them over to the structure's named members.
v2: if else if instead of if if (Alan)
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Fixes:
a6f0f9cf330a ("drm/i915/guc: Plumb GuC-capture into gpu_coredump")
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Cc: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Aravind Iddamsetty <aravind.iddamsetty@intel.com>
Cc: Michael Cheng <michael.cheng@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Bruce Chang <yu.bruce.chang@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230311063714.570389-2-John.C.Harrison@Intel.com
(cherry picked from commit
9724ecdbb9ddd6da3260e4a442574b90fc75188a)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
John Harrison [Fri, 27 Jan 2023 00:28:42 +0000 (16:28 -0800)]
drm/i915/guc: Rename GuC register state capture node to be more obvious
[ Upstream commit
583ebae783b8241a30581c084ad6226051b594c5 ]
The GuC specific register state entry in the error capture object was
just called 'capture'. Although the companion 'node' entry was called
'guc_capture_node'. Rename the base entry to be 'guc_capture' instead
so that it is a) more consistent and b) more obvious what it is.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230127002842.3169194-9-John.C.Harrison@Intel.com
Stable-dep-of:
8df23e4c4f72 ("drm/i915/guc: Fix missing ecodes")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Tejas Upadhyay [Wed, 1 Mar 2023 20:10:52 +0000 (12:10 -0800)]
drm/i915/fbdev: lock the fbdev obj before vma pin
[ Upstream commit
ed00eba03474adbf525ff03d69705d8c78b76456 ]
lock the fbdev obj before calling into
i915_vma_pin_iomap(). This helps to solve below :
<7>[ 93.563308] i915 0000:00:02.0: [drm:intelfb_create [i915]] no BIOS fb, allocating a new one
<4>[ 93.581844] ------------[ cut here ]------------
<4>[ 93.581855] WARNING: CPU: 12 PID: 625 at drivers/gpu/drm/i915/gem/i915_gem_pages.c:424 i915_gem_object_pin_map+0x152/0x1c0 [i915]
Fixes:
f0b6b01b3efe ("drm/i915: Add ww context to intel_dpt_pin, v2.")
Cc: Chris Wilson <chris.p.wilson@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230301201053.928709-5-radhakrishna.sripada@intel.com
(cherry picked from commit
561b31acfd65502a2cda2067513240fc57ccdbdc)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Nirmoy Das [Fri, 14 Oct 2022 15:46:55 +0000 (17:46 +0200)]
drm/i915: Print return value on error
[ Upstream commit
20c68127e8e9d7899001c47465d0b79581f5fdc1 ]
Print returned error code for better debuggability.
References: https://gitlab.freedesktop.org/drm/intel/-/issues/7211
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221014154655.14075-1-nirmoy.das@intel.com
Stable-dep-of:
ed00eba03474 ("drm/i915/fbdev: lock the fbdev obj before vma pin")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ido Schimmel [Fri, 17 Mar 2023 15:32:59 +0000 (16:32 +0100)]
mlxsw: core_thermal: Fix fan speed in maximum cooling state
[ Upstream commit
6d206b1ea9f48433a96edec7028586db1d947911 ]
The cooling levels array is supposed to prevent the system fans from
being configured below a 20% duty cycle as otherwise some of them get
stuck at 0 RPM.
Due to an off-by-one error, the last element in the array was not
initialized, causing it to be set to zero, which in turn lead to fans
being configured with a 0% duty cycle in maximum cooling state.
Since commit
332fdf951df8 ("mlxsw: thermal: Fix out-of-bounds memory
accesses") the contents of the array are static. Therefore, instead of
fixing the initialization of the array, simply remove it and adjust
thermal_cooling_device_ops::set_cur_state() so that the configured duty
cycle is never set below 20%.
Before:
# cat /sys/class/thermal/thermal_zone0/cdev0/type
mlxsw_fan
# echo 10 > /sys/class/thermal/thermal_zone0/cdev0/cur_state
# cat /sys/class/hwmon/hwmon0/name
mlxsw
# cat /sys/class/hwmon/hwmon0/pwm1
0
After:
# cat /sys/class/thermal/thermal_zone0/cdev0/type
mlxsw_fan
# echo 10 > /sys/class/thermal/thermal_zone0/cdev0/cur_state
# cat /sys/class/hwmon/hwmon0/name
mlxsw
# cat /sys/class/hwmon/hwmon0/pwm1
255
This bug was uncovered when the thermal subsystem repeatedly tried to
configure the cooling devices to their maximum state due to another
issue [1]. This resulted in the fans being stuck at 0 RPM, which
eventually lead to the system undergoing thermal shutdown.
[1] https://lore.kernel.org/netdev/ZA3CFNhU4AbtsP4G@shredder/
Fixes:
a421ce088ac8 ("mlxsw: core: Extend cooling device with cooling levels")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Vadim Pasternak <vadimp@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Daniel Lezcano [Fri, 14 Oct 2022 07:32:51 +0000 (09:32 +0200)]
thermal/drivers/mellanox: Use generic thermal_zone_get_trip() function
[ Upstream commit
44a29a4dab73411671e0b84817a5f07e291b1501 ]
The thermal framework gives the possibility to register the trip
points with the thermal zone. When that is done, no get_trip_* ops are
needed and they can be removed.
Convert ops content logic into generic trip points and register them with the
thermal zone.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Link: https://lore.kernel.org/r/20221014073253.3719911-2-daniel.lezcano@linaro.org
Stable-dep-of:
6d206b1ea9f4 ("mlxsw: core_thermal: Fix fan speed in maximum cooling state")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jochen Henneberg [Fri, 17 Mar 2023 08:08:17 +0000 (09:08 +0100)]
net: stmmac: Fix for mismatched host/device DMA address width
[ Upstream commit
070246e4674b125860d311c18ce2623e73e2bd51 ]
Currently DMA address width is either read from a RO device register
or force set from the platform data. This breaks DMA when the host DMA
address width is <=32it but the device is >32bit.
Right now the driver may decide to use a 2nd DMA descriptor for
another buffer (happens in case of TSO xmit) assuming that 32bit
addressing is used due to platform configuration but the device will
still use both descriptor addresses as one address.
This can be observed with the Intel EHL platform driver that sets
32bit for addr64 but the MAC reports 40bit. The TX queue gets stuck in
case of TCP with iptables NAT configuration on TSO packets.
The logic should be like this: Whatever we do on the host side (memory
allocation GFP flags) should happen with the host DMA width, whenever
we decide how to set addresses on the device registers we must use the
device DMA address width.
This patch renames the platform address width field from addr64 (term
used in device datasheet) to host_addr and uses this value exclusively
for host side operations while all chip operations consider the device
DMA width as read from the device register.
Fixes:
7cfc4486e7ea ("stmmac: intel: Configure EHL PSE0 GbE and PSE1 GbE to 32 bits DMA addressing")
Signed-off-by: Jochen Henneberg <jh@henneberg-systemdesign.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Florian Fainelli [Thu, 16 Mar 2023 23:33:17 +0000 (16:33 -0700)]
net: mdio: fix owner field for mdio buses registered using ACPI
[ Upstream commit
30b605b8501e321f79e19c3238aa6ca31da6087c ]
Bus ownership is wrong when using acpi_mdiobus_register() to register an
mdio bus. That function is not inline, so when it calls
mdiobus_register() the wrong THIS_MODULE value is captured.
CC: Maxime Bizon <mbizon@freebox.fr>
Fixes:
803ca24d2f92 ("net: mdio: Add ACPI support code for mdio")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Maxime Bizon [Thu, 16 Mar 2023 23:33:16 +0000 (16:33 -0700)]
net: mdio: fix owner field for mdio buses registered using device-tree
[ Upstream commit
99669259f3361d759219811e670b7e0742668556 ]
Bus ownership is wrong when using of_mdiobus_register() to register an mdio
bus. That function is not inline, so when it calls mdiobus_register() the wrong
THIS_MODULE value is captured.
Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
Fixes:
90eff9096c01 ("net: phy: Allow splitting MDIO bus/device support from PHYs")
[florian: fix kdoc, added Fixes tag]
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Florian Fainelli [Thu, 16 Mar 2023 20:33:24 +0000 (13:33 -0700)]
net: phy: Ensure state transitions are processed from phy_stop()
[ Upstream commit
4203d84032e28f893594a453bd8bc9c3b15c7334 ]
In the phy_disconnect() -> phy_stop() path, we will be forcibly setting
the PHY state machine to PHY_HALTED. This invalidates the old_state !=
phydev->state condition in phy_state_machine() such that we will neither
display the state change for debugging, nor will we invoke the
link_change_notify() callback.
Factor the code by introducing phy_process_state_change(), and ensure
that we process the state change from phy_stop() as well.
Fixes:
5c5f626bcace ("net: phy: improve handling link_change_notify callback")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Zheng Wang [Thu, 16 Mar 2023 16:15:26 +0000 (00:15 +0800)]
xirc2ps_cs: Fix use after free bug in xirc2ps_detach
[ Upstream commit
e8d20c3ded59a092532513c9bd030d1ea66f5f44 ]
In xirc2ps_probe, the local->tx_timeout_task was bounded
with xirc2ps_tx_timeout_task. When timeout occurs,
it will call xirc_tx_timeout->schedule_work to start the
work.
When we call xirc2ps_detach to remove the driver, there
may be a sequence as follows:
Stop responding to timeout tasks and complete scheduled
tasks before cleanup in xirc2ps_detach, which will fix
the problem.
CPU0 CPU1
|xirc2ps_tx_timeout_task
xirc2ps_detach |
free_netdev |
kfree(dev); |
|
| do_reset
| //use dev
Fixes:
1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Zheng Wang <zyytlz.wz@163.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Daniil Tatianin [Thu, 16 Mar 2023 10:29:21 +0000 (13:29 +0300)]
qed/qed_sriov: guard against NULL derefs from qed_iov_get_vf_info
[ Upstream commit
25143b6a01d0cc5319edd3de22ffa2578b045550 ]
We have to make sure that the info returned by the helper is valid
before using it.
Found by Linux Verification Center (linuxtesting.org) with the SVACE
static analysis tool.
Fixes:
f990c82c385b ("qed*: Add support for ndo_set_vf_trust")
Fixes:
733def6a04bf ("qed*: IOV link control")
Signed-off-by: Daniil Tatianin <d-tatianin@yandex-team.ru>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ard Biesheuvel [Tue, 28 Feb 2023 18:23:09 +0000 (19:23 +0100)]
efi/libstub: smbios: Use length member instead of record struct size
[ Upstream commit
34343eb06afc04af9178a9883d9354dc12beede0 ]
The type 1 SMBIOS record happens to always be the same size, but there
are other record types which have been augmented over time, and so we
should really use the length field in the header to decide where the
string table starts.
Fixes:
550b33cfd4452968 ("arm64: efi: Force the use of ...")
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Szymon Heidrich [Thu, 16 Mar 2023 10:19:54 +0000 (11:19 +0100)]
net: usb: smsc95xx: Limit packet length to skb->len
[ Upstream commit
ff821092cf02a70c2bccd2d19269f01e29aa52cf ]
Packet length retrieved from descriptor may be larger than
the actual socket buffer length. In such case the cloned
skb passed up the network stack will leak kernel memory contents.
Fixes:
2f7ca802bdae ("net: Add SMSC LAN9500 USB2.0 10/100 ethernet adapter driver")
Signed-off-by: Szymon Heidrich <szymon.heidrich@gmail.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20230316101954.75836-1-szymon.heidrich@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Álvaro Fernández Rojas [Thu, 16 Mar 2023 17:28:07 +0000 (18:28 +0100)]
net: dsa: b53: mmap: fix device tree support
[ Upstream commit
30796d0dcb6e41c6558a07950f2ce60c209da867 ]
CPU port should also be enabled in order to get a working switch.
Fixes:
a5538a777b73 ("net: dsa: b53: mmap: Add device tree support")
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20230316172807.460146-1-noltari@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jeff Layton [Fri, 17 Mar 2023 17:13:08 +0000 (13:13 -0400)]
nfsd: don't replace page in rq_pages if it's a continuation of last page
[ Upstream commit
27c934dd8832dd40fd34776f916dc201e18b319b ]
The splice read calls nfsd_splice_actor to put the pages containing file
data into the svc_rqst->rq_pages array. It's possible however to get a
splice result that only has a partial page at the end, if (e.g.) the
filesystem hands back a short read that doesn't cover the whole page.
nfsd_splice_actor will plop the partial page into its rq_pages array and
return. Then later, when nfsd_splice_actor is called again, the
remainder of the page may end up being filled out. At this point,
nfsd_splice_actor will put the page into the array _again_ corrupting
the reply. If this is done enough times, rq_next_page will overrun the
array and corrupt the trailing fields -- the rq_respages and
rq_next_page pointers themselves.
If we've already added the page to the array in the last pass, don't add
it to the array a second time when dealing with a splice continuation.
This was originally handled properly in nfsd_splice_actor, but commit
91e23b1c3982 ("NFSD: Clean up nfsd_splice_actor()") removed the check
for it.
Fixes:
91e23b1c3982 ("NFSD: Clean up nfsd_splice_actor()")
Cc: Al Viro <viro@zeniv.linux.org.uk>
Reported-by: Dario Lesca <d.lesca@solinos.it>
Tested-by: David Critch <dcritch@redhat.com>
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2150630
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yu Kuai [Wed, 15 Mar 2023 06:21:54 +0000 (14:21 +0800)]
scsi: scsi_dh_alua: Fix memleak for 'qdata' in alua_activate()
[ Upstream commit
a13faca032acbf2699293587085293bdfaafc8ae ]
If alua_rtpg_queue() failed from alua_activate(), then 'qdata' is not
freed, which will cause following memleak:
unreferenced object 0xffff88810b2c6980 (size 32):
comm "kworker/u16:2", pid 635322, jiffies
4355801099 (age 1216426.076s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
40 39 24 c1 ff ff ff ff 00 f8 ea 0a 81 88 ff ff @9$.............
backtrace:
[<
0000000098f3a26d>] alua_activate+0xb0/0x320
[<
000000003b529641>] scsi_dh_activate+0xb2/0x140
[<
000000007b296db3>] activate_path_work+0xc6/0xe0 [dm_multipath]
[<
000000007adc9ace>] process_one_work+0x3c5/0x730
[<
00000000c457a985>] worker_thread+0x93/0x650
[<
00000000cb80e628>] kthread+0x1ba/0x210
[<
00000000a1e61077>] ret_from_fork+0x22/0x30
Fix the problem by freeing 'qdata' in error path.
Fixes:
625fe857e4fa ("scsi: scsi_dh_alua: Check scsi_device_get() return value")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20230315062154.668812-1-yukuai1@huaweicloud.com
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yicong Yang [Mon, 13 Mar 2023 07:45:52 +0000 (15:45 +0800)]
i2c: hisi: Only use the completion interrupt to finish the transfer
[ Upstream commit
d98263512684a47e81bcb72a5408958ecd1e60b0 ]
The controller will always generate a completion interrupt when the
transfer is finished normally or not. Currently we use either error or
completion interrupt to finish, this may result the completion
interrupt unhandled and corrupt the next transfer, especially at low
speed mode. Since on error case, the error interrupt will come first
then is the completion interrupt. So only use the completion interrupt
to finish the whole transfer process.
Fixes:
d62fbdb99a85 ("i2c: add support for HiSilicon I2C controller")
Reported-by: Sheng Feng <fengsheng5@huawei.com>
Signed-off-by: Sheng Feng <fengsheng5@huawei.com>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Matthias Schiffer [Mon, 13 Feb 2023 15:25:50 +0000 (16:25 +0100)]
i2c: mxs: ensure that DMA buffers are safe for DMA
[ Upstream commit
5190417bdf72c71b65bd9892103c6186816a6e8b ]
We found that after commit
9c46929e7989
("ARM: implement THREAD_INFO_IN_TASK for uniprocessor systems"), the
PCF85063 RTC driver stopped working on i.MX28 due to regmap_bulk_read()
reading bogus data into a stack buffer. This is caused by the i2c-mxs
driver using DMA transfers even for messages without the I2C_M_DMA_SAFE
flag, and the aforementioned commit enabling vmapped stacks.
As the MXS I2C controller requires DMA for reads of >4 bytes, DMA can't be
disabled, so the issue is fixed by using i2c_get_dma_safe_msg_buf() to
create a bounce buffer when needed.
Fixes:
9c46929e7989 ("ARM: implement THREAD_INFO_IN_TASK for uniprocessor systems")
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Alexander Stein [Mon, 30 Jan 2023 15:32:47 +0000 (16:32 +0100)]
i2c: imx-lpi2c: check only for enabled interrupt flags
[ Upstream commit
1c7885004567e8951d65a983be095f254dd20bef ]
When reading from I2C, the Tx watermark is set to 0. Unfortunately the
TDF (transmit data flag) is enabled when Tx FIFO entries is equal or less
than watermark. So it is set in every case, hence the reset default of 1.
This results in the MSR_RDF _and_ MSR_TDF flags to be set thus trying
to send Tx data on a read message.
Mask the IRQ status to filter for wanted flags only.
Fixes:
a55fa9d0e42e ("i2c: imx-lpi2c: add low power i2c bus driver")
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Tested-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
AKASHI Takahiro [Tue, 7 Mar 2023 06:45:31 +0000 (15:45 +0900)]
igc: fix the validation logic for taprio's gate list
[ Upstream commit
2b4cc3d3f4d8ec42961e98568a0afeee96a943ab ]
The check introduced in the commit
a5fd39464a40 ("igc: Lift TAPRIO schedule
restriction") can detect a false positive error in some corner case.
For instance,
tc qdisc replace ... taprio num_tc 4
...
sched-entry S 0x01 100000 # slot#1
sched-entry S 0x03 100000 # slot#2
sched-entry S 0x04 100000 # slot#3
sched-entry S 0x08 200000 # slot#4
flags 0x02 # hardware offload
Here the queue#0 (the first queue) is on at the slot#1 and #2,
and off at the slot#3 and #4. Under the current logic, when the slot#4
is examined, validate_schedule() returns *false* since the enablement
count for the queue#0 is two and it is already off at the previous slot
(i.e. #3). But this definition is truely correct.
Let's fix the logic to enforce a strict validation for consecutively-opened
slots.
Fixes:
a5fd39464a40 ("igc: Lift TAPRIO schedule restriction")
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Akihiko Odaki [Thu, 1 Dec 2022 10:20:03 +0000 (19:20 +0900)]
igbvf: Regard vf reset nack as success
[ Upstream commit
02c83791ef969c6a8a150b4927193d0d0e50fb23 ]
vf reset nack actually represents the reset operation itself is
performed but no address is assigned. Therefore, e1000_reset_hw_vf
should fill the "perm_addr" with the zero address and return success on
such an occasion. This prevents its callers in netdev.c from saying PF
still resetting, and instead allows them to correctly report that no
address is assigned.
Fixes:
6ddbc4cf1f4d ("igb: Indicate failure on vf reset for empty mac address")
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Tested-by: Marek Szlosek <marek.szlosek@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Gaosheng Cui [Tue, 22 Nov 2022 02:28:52 +0000 (10:28 +0800)]
intel/igbvf: free irq on the error path in igbvf_request_msix()
[ Upstream commit
85eb39bb39cbb5c086df1e19ba67cc1366693a77 ]
In igbvf_request_msix(), irqs have not been freed on the err path,
we need to free it. Fix it.
Fixes:
d4e0fe01a38a ("igbvf: add new driver to support 82576 virtual functions")
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: Marek Szlosek <marek.szlosek@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ahmed Zaki [Wed, 15 Mar 2023 19:59:25 +0000 (13:59 -0600)]
iavf: do not track VLAN 0 filters
[ Upstream commit
964290ff32d132bf971d45b29f7de39756dab7c8 ]
When an interface with the maximum number of VLAN filters is brought up,
a spurious error is logged:
[257.483082] 8021q: adding VLAN 0 to HW filter on device enp0s3
[257.483094] iavf 0000:00:03.0 enp0s3: Max allowed VLAN filters 8. Remove existing VLANs or disable filtering via Ethtool if supported.
The VF driver complains that it cannot add the VLAN 0 filter.
On the other hand, the PF driver always adds VLAN 0 filter on VF
initialization. The VF does not need to ask the PF for that filter at
all.
Fix the error by not tracking VLAN 0 filters altogether. With that, the
check added by commit
0e710a3ffd0c ("iavf: Fix VF driver counting VLAN 0
filters") in iavf_virtchnl.c is useless and might be confusing if left as
it suggests that we track VLAN 0.
Fixes:
0e710a3ffd0c ("iavf: Fix VF driver counting VLAN 0 filters")
Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com>
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Alexander Lobakin [Wed, 1 Mar 2023 11:59:08 +0000 (12:59 +0100)]
iavf: fix non-tunneled IPv6 UDP packet type and hashing
[ Upstream commit
de58647b4301fe181f9c38e8b46f7021584ae427 ]
Currently, IAVF's decode_rx_desc_ptype() correctly reports payload type
of L4 for IPv4 UDP packets and IPv{4,6} TCP, but only L3 for IPv6 UDP.
Originally, i40e, ice and iavf were affected.
Commit
73df8c9e3e3d ("i40e: Correct UDP packet header for non_tunnel-ipv6")
fixed that in i40e, then
commit
638a0c8c8861 ("ice: fix incorrect payload indicator on PTYPE")
fixed that for ice.
IPv6 UDP is L4 obviously. Fix it and make iavf report correct L4 hash
type for such packets, so that the stack won't calculate it on CPU when
needs it.
Fixes:
206812b5fccb ("i40e/i40evf: i40e implementation for skb_set_hash")
Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com>
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Alexander Lobakin [Wed, 1 Mar 2023 11:59:07 +0000 (12:59 +0100)]
iavf: fix inverted Rx hash condition leading to disabled hash
[ Upstream commit
32d57f667f871bc5a8babbe27ea4c5e668ee0ea8 ]
Condition, which checks whether the netdev has hashing enabled is
inverted. Basically, the tagged commit effectively disabled passing flow
hash from descriptor to skb, unless user *disables* it via Ethtool.
Commit
a876c3ba59a6 ("i40e/i40evf: properly report Rx packet hash")
fixed this problem, but only for i40e.
Invert the condition now in iavf and unblock passing hash to skbs again.
Fixes:
857942fd1aa1 ("i40e: Fix Rx hash reported to the stack by our driver")
Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com>
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kal Conley [Wed, 8 Mar 2023 17:40:13 +0000 (18:40 +0100)]
xsk: Add missing overflow check in xdp_umem_reg
[ Upstream commit
c7df4813b149362248d6ef7be41a311e27bf75fe ]
The number of chunks can overflow u32. Make sure to return -EINVAL on
overflow. Also remove a redundant u32 cast assigning umem->npgs.
Fixes:
bbff2f321a86 ("xsk: new descriptor addressing scheme")
Signed-off-by: Kal Conley <kal.conley@dectris.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/20230308174013.1114745-1-kal.conley@dectris.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dave Wysochanski [Thu, 9 Mar 2023 18:58:52 +0000 (13:58 -0500)]
NFS: Fix /proc/PID/io read_bytes for buffered reads
[ Upstream commit
9c88ea00fef03031ce6554531e89be82f6a42835 ]
Prior to commit
8786fde8421c ("Convert NFS from readpages to
readahead"), nfs_readpages() used the old mm interface read_cache_pages()
which called task_io_account_read() for each NFS page read. After
this commit, nfs_readpages() is converted to nfs_readahead(), which
now uses the new mm interface readahead_page(). The new interface
requires callers to call task_io_account_read() themselves.
In addition, to nfs_readahead() task_io_account_read() should also
be called from nfs_read_folio().
Fixes:
8786fde8421c ("Convert NFS from readpages to readahead")
Link: https://lore.kernel.org/linux-nfs/CAPt2mGNEYUk5u8V4abe=5MM5msZqmvzCVrtCP4Qw1n=gCHCnww@mail.gmail.com/
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Alexander Stein [Wed, 8 Mar 2023 10:17:20 +0000 (11:17 +0100)]
arm64: dts: imx93: add missing #address-cells and #size-cells to i2c nodes
[ Upstream commit
b3cdf730486b048ca0bf23bef050550d9fd40422 ]
Add them to the SoC .dtsi, so that not every board has to specify them.
Fixes:
1225396fefea ("arm64: dts: imx93: add lpi2c nodes")
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Marek Vasut [Tue, 28 Feb 2023 21:52:44 +0000 (22:52 +0100)]
arm64: dts: imx8mn: specify #sound-dai-cells for SAI nodes
[ Upstream commit
62fb54148cd6eb456ff031be8fb447c98cf0bd9b ]
Add #sound-dai-cells properties to SAI nodes.
Reviewed-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Fixes:
9e9860069725 ("arm64: dts: imx8mn: Add SAI nodes")
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Peng Fan [Sun, 26 Feb 2023 13:12:14 +0000 (21:12 +0800)]
ARM: dts: imx6sl: tolino-shine2hd: fix usbotg1 pinctrl
[ Upstream commit
1cd489e1ada1cffa56bd06fd4609f5a60a985d43 ]
usb@2184000: 'pinctrl-0' is a dependency of 'pinctrl-names'
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Fixes:
9c7016f1ca6d ("ARM: dts: imx: add devicetree for Tolino Shine 2 HD")
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Peng Fan [Sun, 26 Feb 2023 13:12:13 +0000 (21:12 +0800)]
ARM: dts: imx6sll: e60k02: fix usbotg1 pinctrl
[ Upstream commit
957c04e9784c7c757e8cc293d7fb2a60cdf461b6 ]
usb@2184000: 'pinctrl-0' is a dependency of 'pinctrl-names'
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Fixes:
c100ea86e6ab ("ARM: dts: add Netronix E60K02 board common file")
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Peng Fan [Sun, 26 Feb 2023 13:12:12 +0000 (21:12 +0800)]
ARM: dts: imx6sll: e70k02: fix usbotg1 pinctrl
[ Upstream commit
3d37f7685d525e58674c23d607020e66d501dcd1 ]
usb@2184000: 'pinctrl-0' is a dependency of 'pinctrl-names'
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Fixes:
3bb3fd856505 ("ARM: dts: add Netronix E70K02 board common file")
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Andrew Halaney [Tue, 14 Feb 2023 17:15:05 +0000 (11:15 -0600)]
arm64: dts: imx8dxl-evk: Fix eqos phy reset gpio
[ Upstream commit
feafeb53140af3cde3fba46b292b15b3a0c0635c ]
The deprecated property is named snps,reset-gpio, but this devicetree
used snps,reset-gpios instead which results in the reset not being used
and the following make dtbs_check error:
./arch/arm64/boot/dts/freescale/imx8dxl-evk.dtb: ethernet@
5b050000: 'snps,reset-gpio' is a dependency of 'snps,reset-delays-us'
From schema: ./Documentation/devicetree/bindings/net/snps,dwmac.yaml
Use the preferred method of defining the reset gpio in the phy node
itself. Note that this drops the 10 us pre-delay, but prior this wasn't
used at all and a pre-delay doesn't make much sense in this context so
it should be fine.
Fixes:
8dd495d12374 ("arm64: dts: freescale: add support for i.MX8DXL EVK board")
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Wei Fang [Fri, 16 Dec 2022 01:14:34 +0000 (09:14 +0800)]
arm64: dts: imx8dxl-evk: Disable hibernation mode of AR8031 for EQOS
[ Upstream commit
0deefb5bd1382aae0aed7c8b266d5088a5308a26 ]
The hibernation mode of AR8031 PHY defaults to be enabled after hardware
reset. When the cable is unplugged, the PHY will enter hibernation mode
after about 10 senconds and the PHY clocks will be stopped to save
power. However, due to the design of EQOS, the mac needs the RX_CLK of
PHY for software reset to complete. Otherwise the software reset of EQOS
will be failed and do not work correctly. The only way is to disable
hibernation mode of AR8031 PHY for EQOS, the "qca,disable-hibernation-mode"
property is used for this purpose and has already been submitted to the
upstream, for more details please refer to the below link:
https://lore.kernel.org/netdev/
20220818030054.1010660-2-wei.fang@nxp.com/
This issue is easy to reproduce, just unplug the cable and "ifconfig eth0
down", after about 10 senconds, then "ifconfig eth0 up", you will see
failure log on the serial port. The log is shown as following:
root@imx8dxlevk:~#
[34.941970] imx-dwmac
5b050000.ethernet eth0: Link is Down
root@imx8dxlevk:~# ifconfig eth0 down
[35.437814] imx-dwmac
5b050000.ethernet eth0: FPE workqueue stop
[35.507913] imx-dwmac
5b050000.ethernet eth0: PHY [stmmac-1:00] driver [Qualcomm Atheros AR8031/AR8033] (irq=POLL)
[35.518613] imx-dwmac
5b050000.ethernet eth0: configuring for phy/rgmii-id link mode
root@imx8dxlevk:~# ifconfig eth0 up
[71.143044] imx-dwmac
5b050000.ethernet eth0: Register MEM_TYPE_PAGE_POOL RxQ-0
[71.215855] imx-dwmac
5b050000.ethernet eth0: PHY [stmmac-1:00] driver [Qualcomm Atheros AR8031/AR8033] (irq=POLL)
[72.230417] imx-dwmac
5b050000.ethernet: Failed to reset the dma
[72.236512] imx-dwmac
5b050000.ethernet eth0: stmmac_hw_setup: DMA engine initialization failed
[72.245258] imx-dwmac
5b050000.ethernet eth0: __stmmac_open: Hw setup failed
SIOCSIFFLAGS: Connection timed out
After applying this patch, the software reset of EQOS will be
successful. And the log is shown as below.
root@imx8dxlevk:~# ifconfig eth0 up
[96.114344] imx-dwmac
5b050000.ethernet eth0: Register MEM_TYPE_PAGE_POOL RxQ-0
[96.171466] imx-dwmac
5b050000.ethernet eth0: PHY [stmmac-1:00] driver [Qualcomm Atheros AR8031/AR8033] (irq=POLL)
[96.188883] imx-dwmac
5b050000.ethernet eth0: No Safety Features support found
[96.196221] imx-dwmac
5b050000.ethernet eth0: IEEE 1588-2008 Advanced Timestamp supported
[96.204846] imx-dwmac
5b050000.ethernet eth0: registered PTP clock
[96.225558] imx-dwmac
5b050000.ethernet eth0: FPE workqueue start
[96.236858] imx-dwmac
5b050000.ethernet eth0: configuring for phy/rgmii-id link mode
[96.249358] 8021q: adding VLAN 0 to HW filter on device eth0
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Clark Wang <xiaoning.wang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Stable-dep-of:
feafeb53140a ("arm64: dts: imx8dxl-evk: Fix eqos phy reset gpio")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Zheng Wang [Sat, 11 Mar 2023 17:46:50 +0000 (01:46 +0800)]
power: supply: da9150: Fix use after free bug in da9150_charger_remove due to race condition
[ Upstream commit
06615d11cc78162dfd5116efb71f29eb29502d37 ]
In da9150_charger_probe, &charger->otg_work is bound with
da9150_charger_otg_work. da9150_charger_otg_ncb may be
called to start the work.
If we remove the module which will call da9150_charger_remove
to make cleanup, there may be a unfinished work. The possible
sequence is as follows:
Fix it by canceling the work before cleanup in the da9150_charger_remove
CPU0 CPUc1
|da9150_charger_otg_work
da9150_charger_remove |
power_supply_unregister |
device_unregister |
power_supply_dev_release|
kfree(psy) |
|
| power_supply_changed(charger->usb);
| //use
Fixes:
c1a281e34dae ("power: Add support for DA9150 Charger")
Signed-off-by: Zheng Wang <zyytlz.wz@163.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Zheng Wang [Thu, 9 Mar 2023 17:47:28 +0000 (01:47 +0800)]
power: supply: bq24190: Fix use after free bug in bq24190_remove due to race condition
[ Upstream commit
47c29d69212911f50bdcdd0564b5999a559010d4 ]
In bq24190_probe, &bdi->input_current_limit_work is bound
with bq24190_input_current_limit_work. When external power
changed, it will call bq24190_charger_external_power_changed
to start the work.
If we remove the module which will call bq24190_remove to make
cleanup, there may be a unfinished work. The possible
sequence is as follows:
CPU0 CPUc1
|bq24190_input_current_limit_work
bq24190_remove |
power_supply_unregister |
device_unregister |
power_supply_dev_release|
kfree(psy) |
|
| power_supply_get_property_from_supplier
| //use
Fix it by finishing the work before cleanup in the bq24190_remove
Fixes:
97774672573a ("power_supply: Initialize changed_work before calling device_add")
Signed-off-by: Zheng Wang <zyytlz.wz@163.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Manivannan Sadhasivam [Tue, 7 Mar 2023 15:32:01 +0000 (21:02 +0530)]
arm64: dts: qcom: sm8450: Mark UFS controller as cache coherent
[ Upstream commit
8ba961d4339c5db0e69ff6627606fe1f34c838e5 ]
The UFS controller on SM8450 supports cache coherency, hence add the
"dma-coherent" property to mark it as such.
Fixes:
07fa917a335e ("arm64: dts: qcom: sm8450: add ufs nodes")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230307153201.180626-2-manivannan.sadhasivam@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Cruise Hung [Wed, 22 Mar 2023 22:08:41 +0000 (17:08 -0500)]
drm/amd/display: Fix DP MST sinks removal issue
[ Upstream commit
cbd6c1b17d3b42b7935526a86ad5f66838767d03 ]
[Why]
In USB4 DP tunneling, it's possible to have this scenario that
the path becomes unavailable and CM tears down the path a little bit late.
So, in this case, the HPD is high but fails to read any DPCD register.
That causes the link connection type to be set to sst.
And not all sinks are removed behind the MST branch.
[How]
Restore the link connection type if it fails to read DPCD register.
Cc: stable@vger.kernel.org
Cc: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Cruise Hung <Cruise.Hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit
cbd6c1b17d3b42b7935526a86ad5f66838767d03)
Modified for stable backport as a lot of the code in this file was moved
in 6.3 to drivers/gpu/drm/amd/display/dc/link/link_detection.c.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Paolo Abeni [Thu, 23 Mar 2023 17:49:02 +0000 (18:49 +0100)]
mptcp: fix UaF in listener shutdown
[ Upstream commit
0a3f4f1f9c27215e4ddcd312558342e57b93e518 ]
Backports notes: one simple conflict in net/mptcp/protocol.c with:
commit
f8c9dfbd875b ("mptcp: add pm listener events")
Where one commit removes code in __mptcp_close_ssk() while the other
one adds one line at the same place. We can simply remove the whole
condition because this extra instruction is not present in v6.1.
As reported by Christoph after having refactored the passive
socket initialization, the mptcp listener shutdown path is prone
to an UaF issue.
BUG: KASAN: use-after-free in _raw_spin_lock_bh+0x73/0xe0
Write of size 4 at addr
ffff88810cb23098 by task syz-executor731/1266
CPU: 1 PID: 1266 Comm: syz-executor731 Not tainted 6.2.0-rc59af4eaa31c1f6c00c8f1e448ed99a45c66340dd5 #6
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x6e/0x91
print_report+0x16a/0x46f
kasan_report+0xad/0x130
kasan_check_range+0x14a/0x1a0
_raw_spin_lock_bh+0x73/0xe0
subflow_error_report+0x6d/0x110
sk_error_report+0x3b/0x190
tcp_disconnect+0x138c/0x1aa0
inet_child_forget+0x6f/0x2e0
inet_csk_listen_stop+0x209/0x1060
__mptcp_close_ssk+0x52d/0x610
mptcp_destroy_common+0x165/0x640
mptcp_destroy+0x13/0x80
__mptcp_destroy_sock+0xe7/0x270
__mptcp_close+0x70e/0x9b0
mptcp_close+0x2b/0x150
inet_release+0xe9/0x1f0
__sock_release+0xd2/0x280
sock_close+0x15/0x20
__fput+0x252/0xa20
task_work_run+0x169/0x250
exit_to_user_mode_prepare+0x113/0x120
syscall_exit_to_user_mode+0x1d/0x40
do_syscall_64+0x48/0x90
entry_SYSCALL_64_after_hwframe+0x72/0xdc
The msk grace period can legitly expire in between the last
reference count dropped in mptcp_subflow_queue_clean() and
the later eventual access in inet_csk_listen_stop()
After the previous patch we don't need anymore special-casing
msk listener socket cleanup: the mptcp worker will process each
of the unaccepted msk sockets.
Just drop the now unnecessary code.
Please note this commit depends on the two parent ones:
mptcp: refactor passive socket initialization
mptcp: use the workqueue to destroy unaccepted sockets
Fixes:
6aeed9045071 ("mptcp: fix race on unaccepted mptcp sockets")
Cc: stable@vger.kernel.org
Reported-and-tested-by: Christoph Paasch <cpaasch@apple.com>
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/346
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Paolo Abeni [Thu, 23 Mar 2023 17:49:01 +0000 (18:49 +0100)]
mptcp: use the workqueue to destroy unaccepted sockets
[ Upstream commit
b6985b9b82954caa53f862d6059d06c0526254f0 ]
Backports notes: one simple conflict in net/mptcp/protocol.c with:
commit
a5ef058dc4d9 ("net: introduce and use custom sockopt socket flag")
Where the two commits add a new line for different actions in the same
context in mptcp_stream_accept().
Christoph reported a UaF at token lookup time after having
refactored the passive socket initialization part:
BUG: KASAN: use-after-free in __token_bucket_busy+0x253/0x260
Read of size 4 at addr
ffff88810698d5b0 by task syz-executor653/3198
CPU: 1 PID: 3198 Comm: syz-executor653 Not tainted 6.2.0-rc59af4eaa31c1f6c00c8f1e448ed99a45c66340dd5 #6
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x6e/0x91
print_report+0x16a/0x46f
kasan_report+0xad/0x130
__token_bucket_busy+0x253/0x260
mptcp_token_new_connect+0x13d/0x490
mptcp_connect+0x4ed/0x860
__inet_stream_connect+0x80e/0xd90
tcp_sendmsg_fastopen+0x3ce/0x710
mptcp_sendmsg+0xff1/0x1a20
inet_sendmsg+0x11d/0x140
__sys_sendto+0x405/0x490
__x64_sys_sendto+0xdc/0x1b0
do_syscall_64+0x3b/0x90
entry_SYSCALL_64_after_hwframe+0x72/0xdc
We need to properly clean-up all the paired MPTCP-level
resources and be sure to release the msk last, even when
the unaccepted subflow is destroyed by the TCP internals
via inet_child_forget().
We can re-use the existing MPTCP_WORK_CLOSE_SUBFLOW infra,
explicitly checking that for the critical scenario: the
closed subflow is the MPC one, the msk is not accepted and
eventually going through full cleanup.
With such change, __mptcp_destroy_sock() is always called
on msk sockets, even on accepted ones. We don't need anymore
to transiently drop one sk reference at msk clone time.
Please note this commit depends on the parent one:
mptcp: refactor passive socket initialization
Fixes:
58b09919626b ("mptcp: create msk early")
Cc: stable@vger.kernel.org
Reported-and-tested-by: Christoph Paasch <cpaasch@apple.com>
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/347
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Paolo Abeni [Thu, 9 Mar 2023 14:49:58 +0000 (15:49 +0100)]
mptcp: refactor passive socket initialization
[ Upstream commit
3a236aef280ed5122b2d47087eb514d0921ae033 ]
After commit
30e51b923e43 ("mptcp: fix unreleased socket in accept queue")
unaccepted msk sockets go throu complete shutdown, we don't need anymore
to delay inserting the first subflow into the subflow lists.
The reference counting deserve some extra care, as __mptcp_close() is
unaware of the request socket linkage to the first subflow.
Please note that this is more a refactoring than a fix but because this
modification is needed to include other corrections, see the following
commits. Then a Fixes tag has been added here to help the stable team.
Fixes:
30e51b923e43 ("mptcp: fix unreleased socket in accept queue")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Tested-by: Christoph Paasch <cpaasch@apple.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Saaem Rizvi [Mon, 27 Feb 2023 23:55:07 +0000 (18:55 -0500)]
drm/amd/display: Remove OTG DIV register write for Virtual signals.
[ Upstream commit
709671ffb15dcd1b4f6afe2a9d8c67c7c4ead4a1 ]
[WHY]
Hot plugging and then hot unplugging leads to k1 and k2 values to
change, as signal is detected as a virtual signal on hot unplug. Writing
these values to OTG_PIXEL_RATE_DIV register might cause primary display
to blank (known hw bug).
[HOW]
No longer write k1 and k2 values to register if signal is virtual, we
have safe guards in place in the case that k1 and k2 is unassigned so
that an unknown value is not written to the register either.
Cc: stable@vger.kernel.org
Cc: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Samson Tam <Samson.Tam@amd.com>
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Saaem Rizvi <SyedSaaem.Rizvi@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Aurabindo Pillai [Mon, 30 Jan 2023 18:07:59 +0000 (13:07 -0500)]
drm/amd/display: fix k1 k2 divider programming for phantom streams
[ Upstream commit
3b214bb7185d8284d7d4c53e15127f69a375abf6 ]
[Why & How]
When k1 and k2 divider programming logic is executed for a phantom
stream, the corresponding master stream should be used for the
calculation. Fix the if condition to use the master stream for checking
signal type instead of the phantom stream.
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of:
709671ffb15d ("drm/amd/display: Remove OTG DIV register write for Virtual signals.")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Eric Bernstein [Tue, 11 Oct 2022 18:28:47 +0000 (14:28 -0400)]
drm/amd/display: Include virtual signal to set k1 and k2 values
[ Upstream commit
368307cef69ccd9bf5511f25e58e3a103be169fb ]
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Eric Bernstein <eric.bernstein@amd.com>
Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of:
709671ffb15d ("drm/amd/display: Remove OTG DIV register write for Virtual signals.")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Costa Shulyupin [Thu, 16 Mar 2023 14:45:35 +0000 (16:45 +0200)]
tracing/hwlat: Replace sched_setaffinity with set_cpus_allowed_ptr
[ Upstream commit
71c7a30442b724717a30d5e7d1662ba4904eb3d4 ]
There is a problem with the behavior of hwlat in a container,
resulting in incorrect output. A warning message is generated:
"cpumask changed while in round-robin mode, switching to mode none",
and the tracing_cpumask is ignored. This issue arises because
the kernel thread, hwlatd, is not a part of the container, and
the function sched_setaffinity is unable to locate it using its PID.
Additionally, the task_struct of hwlatd is already known.
Ultimately, the function set_cpus_allowed_ptr achieves
the same outcome as sched_setaffinity, but employs task_struct
instead of PID.
Test case:
# cd /sys/kernel/tracing
# echo 0 > tracing_on
# echo round-robin > hwlat_detector/mode
# echo hwlat > current_tracer
# unshare --fork --pid bash -c 'echo 1 > tracing_on'
# dmesg -c
Actual behavior:
[573502.809060] hwlat_detector: cpumask changed while in round-robin mode, switching to mode none
Link: https://lore.kernel.org/linux-trace-kernel/20230316144535.1004952-1-costa.shul@redhat.com
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Fixes:
0330f7aa8ee63 ("tracing: Have hwlat trace migrate across tracing_cpumask CPUs")
Signed-off-by: Costa Shulyupin <costa.shul@redhat.com>
Acked-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Song Liu [Mon, 13 Mar 2023 17:16:08 +0000 (10:16 -0700)]
perf: fix perf_event_context->time
[ Upstream commit
baf1b12a67f5b24f395baca03e442ce27cab0c18 ]
Time readers rely on perf_event_context->[time|timestamp|timeoffset] to get
accurate time_enabled and time_running for an event. The difference between
ctx->timestamp and ctx->time is the among of time when the context is not
enabled. __update_context_time(ctx, false) is used to increase timestamp,
but not time. Therefore, it should only be called in ctx_sched_in() when
EVENT_TIME was not enabled.
Fixes:
09f5e7dc7ad7 ("perf: Fix perf_event_read_local() time")
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/r/20230313171608.298734-1-song@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yang Jihong [Tue, 14 Mar 2023 04:47:35 +0000 (04:47 +0000)]
perf/core: Fix perf_output_begin parameter is incorrectly invoked in perf_event_bpf_output
[ Upstream commit
eb81a2ed4f52be831c9fb879752d89645a312c13 ]
syzkaller reportes a KASAN issue with stack-out-of-bounds.
The call trace is as follows:
dump_stack+0x9c/0xd3
print_address_description.constprop.0+0x19/0x170
__kasan_report.cold+0x6c/0x84
kasan_report+0x3a/0x50
__perf_event_header__init_id+0x34/0x290
perf_event_header__init_id+0x48/0x60
perf_output_begin+0x4a4/0x560
perf_event_bpf_output+0x161/0x1e0
perf_iterate_sb_cpu+0x29e/0x340
perf_iterate_sb+0x4c/0xc0
perf_event_bpf_event+0x194/0x2c0
__bpf_prog_put.constprop.0+0x55/0xf0
__cls_bpf_delete_prog+0xea/0x120 [cls_bpf]
cls_bpf_delete_prog_work+0x1c/0x30 [cls_bpf]
process_one_work+0x3c2/0x730
worker_thread+0x93/0x650
kthread+0x1b8/0x210
ret_from_fork+0x1f/0x30
commit
267fb27352b6 ("perf: Reduce stack usage of perf_output_begin()")
use on-stack struct perf_sample_data of the caller function.
However, perf_event_bpf_output uses incorrect parameter to convert
small-sized data (struct perf_bpf_event) into large-sized data
(struct perf_sample_data), which causes memory overwriting occurs in
__perf_event_header__init_id.
Fixes:
267fb27352b6 ("perf: Reduce stack usage of perf_output_begin()")
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20230314044735.56551-1-yangjihong1@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Konrad Dybcio [Tue, 3 Jan 2023 14:21:20 +0000 (15:21 +0100)]
interconnect: qcom: qcm2290: Fix MASTER_SNOC_BIMC_NRT
[ Upstream commit
633a12fda6536a1a17bcea29502e777e86a4547e ]
Due to what seems to be a copy-paste error, the _NRT master was
identical to the _RT master, which should not be the case.. Fix it
using the values available from the downstream kernel [1].
[1] https://android.googlesource.com/kernel/msm-extra/devicetree/+/refs/heads/android-msm-bramble-4.19-android11-qpr1/qcom/scuba-bus.dtsi#127
Fixes:
1a14b1ac3935 ("interconnect: qcom: Add QCM2290 driver support")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Link: https://lore.kernel.org/r/20230103142120.15605-1-konrad.dybcio@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dmitry Baryshkov [Thu, 5 Jan 2023 00:22:20 +0000 (02:22 +0200)]
interconnect: qcom: sm8450: switch to qcom_icc_rpmh_* function
[ Upstream commit
87e8fab1917a2b3f6e3dedfd1cdf22a1416e6676 ]
Change sm8450 interconnect driver to use generic qcom_icc_rpmh_*
functions rather than embedding a copy of thema. This also fixes an
overallocation of memory for icc_onecell_data structure.
Fixes:
fafc114a468e ("interconnect: qcom: Add SM8450 interconnect provider driver")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230105002221.1416479-3-dmitry.baryshkov@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dmitry Baryshkov [Thu, 5 Jan 2023 00:22:19 +0000 (02:22 +0200)]
interconnect: qcom: osm-l3: fix icc_onecell_data allocation
[ Upstream commit
f77ebdda0ee652124061c2ac42399bb6c367e729 ]
This is a struct with a trailing zero-length array of icc_node pointers
but it's allocated as if it were a single array of icc_nodes instead.
Fortunately this overallocates memory rather then allocating less memory
than required.
Fix by replacing devm_kcalloc() with devm_kzalloc() and struct_size()
macro.
Fixes:
5bc9900addaf ("interconnect: qcom: Add OSM L3 interconnect provider support")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230105002221.1416479-2-dmitry.baryshkov@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Greg Kroah-Hartman [Wed, 22 Mar 2023 12:34:07 +0000 (13:34 +0100)]
Linux 6.1.21
Link: https://lore.kernel.org/r/20230320145507.420176832@linuxfoundation.org
Tested-by: Chris Paterson (CIP) <chris.paterson2@renesas.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20230321080705.245176209@linuxfoundation.org
Tested-by: Takeshi Ogasawara <takeshi.ogasawara@futuring-girl.com>
Tested-by: Rudi Heitbaum <rudi@heitbaum.com>
Tested-by: Markus Reichelt <lkt+2023@mareichelt.com>
Tested-by: Slade Watkins <srw@sladewatkins.net>
Link: https://lore.kernel.org/r/20230321180747.474321236@linuxfoundation.org
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Ron Economos <re@w6rz.net>
Tested-by: Takeshi Ogasawara <takeshi.ogasawara@futuring-girl.com>
Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>
Tested-by: Chris Paterson (CIP) <chris.paterson2@renesas.com>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Christophe Leroy [Mon, 19 Dec 2022 18:45:58 +0000 (19:45 +0100)]
powerpc/64: Replace -mcpu=e500mc64 by -mcpu=e5500
commit
77e82fa1f9781a958a6ea4aed7aec41239a5a22f upstream.
E500MC64 is a processor pre-dating E5500 that has never been
commercialised. Use -mcpu=e5500 for E5500 core.
More details at https://gcc.gnu.org/PR108149
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/fa71ed20d22c156225436374f0ab847daac893bc.1671475543.git.christophe.leroy@csgroup.eu
Cc: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Christophe Leroy [Thu, 2 Feb 2023 11:01:04 +0000 (12:01 +0100)]
powerpc: Disable CPU unknown by CLANG when CC_IS_CLANG
commit
4b10306e98456aed03cad75ce467e8b1efdccca0 upstream.
CLANG only knows the following CPUs:
generic, 440, 450, 601, 602, 603, 603e, 603ev, 604, 604e, 620, 630,
g3, 7400, g4, 7450, g4+, 750, 8548, 970, g5, a2, e500, e500mc, e5500,
power3, pwr3, power4, pwr4, power5, pwr5, power5x, pwr5x, power6,
pwr6, power6x, pwr6x, power7, pwr7, power8, pwr8, power9, pwr9,
power10, pwr10, powerpc, ppc, ppc32, powerpc64, ppc64, powerpc64le,
ppc64le, futur
Disable other ones when CC_IS_CLANG.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/e62892e32c14a7a5738c597e39e0082cb0abf21c.1675335659.git.christophe.leroy@csgroup.eu
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Budimir Markovic [Wed, 15 Mar 2023 07:29:01 +0000 (00:29 -0700)]
perf: Fix check before add_event_to_groups() in perf_group_detach()
commit
fd0815f632c24878e325821943edccc7fde947a2 upstream.
Events should only be added to a groups rb tree if they have not been
removed from their context by list_del_event(). Since remove_on_exec
made it possible to call list_del_event() on individual events before
they are detached from their group, perf_group_detach() should check each
sibling's attach_state before calling add_event_to_groups() on it.
Fixes:
2e498d0a74e5 ("perf: Add support for event removal on exec")
Signed-off-by: Budimir Markovic <markovicbudimir@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/ZBFzvQV9tEqoHEtH@gentoo
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pavel Begunkov [Mon, 20 Mar 2023 13:05:02 +0000 (07:05 -0600)]
io_uring/msg_ring: let target know allocated index
commit
5da28edd7bd5518f97175ecea77615bb729a7a28 upstream.
msg_ring requests transferring files support auto index selection via
IORING_FILE_INDEX_ALLOC, however they don't return the selected index
to the target ring and there is no other good way for the userspace to
know where is the receieved file.
Return the index for allocated slots and 0 otherwise, which is
consistent with other fixed file installing requests.
Cc: stable@vger.kernel.org # v6.0+
Fixes:
e6130eba8a848 ("io_uring: add support for passing fixed file descriptors")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://github.com/axboe/liburing/issues/809
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dionna Glaze [Thu, 16 Feb 2023 10:08:02 +0000 (11:08 +0100)]
virt/coco/sev-guest: Add throttling awareness
commit
72f7754dcf31c87c92c0c353dcf747814cc5ce10 upstream.
A potentially malicious SEV guest can constantly hammer the hypervisor
using this driver to send down requests and thus prevent or at least
considerably hinder other guests from issuing requests to the secure
processor which is a shared platform resource.
Therefore, the host is permitted and encouraged to throttle such guest
requests.
Add the capability to handle the case when the hypervisor throttles
excessive numbers of requests issued by the guest. Otherwise, the VM
platform communication key will be disabled, preventing the guest from
attesting itself.
Realistically speaking, a well-behaved guest should not even care about
throttling. During its lifetime, it would end up issuing a handful of
requests which the hardware can easily handle.
This is more to address the case of a malicious guest. Such guest should
get throttled and if its VMPCK gets disabled, then that's its own
wrongdoing and perhaps that guest even deserves it.
To the implementation: the hypervisor signals with SNP_GUEST_REQ_ERR_BUSY
that the guest requests should be throttled. That error code is returned
in the upper 32-bit half of exitinfo2 and this is part of the GHCB spec
v2.
So the guest is given a throttling period of 1 minute in which it
retries the request every 2 seconds. This is a good default but if it
turns out to not pan out in practice, it can be tweaked later.
For safety, since the encryption algorithm in GHCBv2 is AES_GCM, control
must remain in the kernel to complete the request with the current
sequence number. Returning without finishing the request allows the
guest to make another request but with different message contents. This
is IV reuse, and breaks cryptographic protections.
[ bp:
- Rewrite commit message and do a simplified version.
- The stable tags are supposed to denote that a cleanup should go
upfront before backporting this so that any future fixes to this
can preserve the sanity of the backporter(s). ]
Fixes:
d5af44dde546 ("x86/sev: Provide support for SNP guest request NAEs")
Signed-off-by: Dionna Glaze <dionnaglaze@google.com>
Co-developed-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Cc: <stable@kernel.org> # d6fd48eff750 ("virt/coco/sev-guest: Check SEV_SNP attribute at probe time")
Cc: <stable@kernel.org> # 970ab823743f (" virt/coco/sev-guest: Simplify extended guest request handling")
Cc: <stable@kernel.org> # c5a338274bdb ("virt/coco/sev-guest: Remove the disable_vmpck label in handle_guest_request()")
Cc: <stable@kernel.org> # 0fdb6cc7c89c ("virt/coco/sev-guest: Carve out the request issuing logic into a helper")
Cc: <stable@kernel.org> # d25bae7dc7b0 ("virt/coco/sev-guest: Do some code style cleanups")
Cc: <stable@kernel.org> # fa4ae42cc60a ("virt/coco/sev-guest: Convert the sw_exit_info_2 checking to a switch-case")
Link: https://lore.kernel.org/r/20230214164638.1189804-2-dionnaglaze@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Borislav Petkov (AMD) [Thu, 16 Feb 2023 09:50:11 +0000 (10:50 +0100)]
virt/coco/sev-guest: Convert the sw_exit_info_2 checking to a switch-case
commit
fa4ae42cc60a7dea30e8f2db444b808d80862345 upstream.
snp_issue_guest_request() checks the value returned by the hypervisor in
sw_exit_info_2 and returns a different error depending on it.
Convert those checks into a switch-case to make it more readable when
more error values are going to be checked in the future.
No functional changes.
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20230307192449.24732-8-bp@alien8.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Borislav Petkov (AMD) [Wed, 15 Feb 2023 10:54:59 +0000 (11:54 +0100)]
virt/coco/sev-guest: Do some code style cleanups
commit
d25bae7dc7b0668cb2a1325c64eb32d5fea4e5a9 upstream.
Remove unnecessary linebreaks, make the code more compact.
No functional changes.
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20230307192449.24732-7-bp@alien8.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Borislav Petkov (AMD) [Tue, 7 Mar 2023 15:19:19 +0000 (09:19 -0600)]
virt/coco/sev-guest: Carve out the request issuing logic into a helper
commit
0fdb6cc7c89cb5e0cbc45dbdbafb8e3fb92ddc95 upstream.
This makes the code flow a lot easier to follow.
No functional changes.
[ Tom: touchups. ]
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230307192449.24732-6-bp@alien8.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Borislav Petkov (AMD) [Wed, 15 Feb 2023 10:43:43 +0000 (11:43 +0100)]
virt/coco/sev-guest: Remove the disable_vmpck label in handle_guest_request()
commit
c5a338274bdb894f088767bea856be344d0ccaef upstream.
Call the function directly instead.
No functional changes.
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20230307192449.24732-5-bp@alien8.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Borislav Petkov (AMD) [Wed, 15 Feb 2023 10:39:41 +0000 (11:39 +0100)]
virt/coco/sev-guest: Simplify extended guest request handling
commit
970ab823743fb54b42002ec76c51481f67436444 upstream.
Return a specific error code - -ENOSPC - to signal the too small cert
data buffer instead of checking exit code and exitinfo2.
While at it, hoist the *fw_err assignment in snp_issue_guest_request()
so that a proper error value is returned to the callers.
[ Tom: check override_err instead of err. ]
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230307192449.24732-4-bp@alien8.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Borislav Petkov (AMD) [Wed, 15 Feb 2023 10:01:42 +0000 (11:01 +0100)]
virt/coco/sev-guest: Check SEV_SNP attribute at probe time
commit
d6fd48eff7506bb866a54e40369df8899f2078a9 upstream.
No need to check it on every ioctl. And yes, this is a common SEV driver
but it does only SNP-specific operations currently. This can be
revisited later, when more use cases appear.
No functional changes.
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20230307192449.24732-3-bp@alien8.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Christophe Leroy [Mon, 19 Dec 2022 18:45:57 +0000 (19:45 +0100)]
powerpc: Pass correct CPU reference to assembler
commit
bfb03af71a3798b5a88a945a9c19ad67e1c4986d upstream.
Jan-Benedict reported issue with building ppc64e_defconfig
with mainline GCC work:
powerpc64-linux-gcc -Wp,-MMD,arch/powerpc/kernel/vdso/.gettimeofday-64.o.d -nostdinc -I./arch/powerpc/include -I./arch/powerpc/include/generated -I./include -I./arch/powerpc/include/uapi -I./arch/powerpc/include/generated/uapi -I./include/uapi -I./include/generated/uapi -include ./include/linux/compiler-version.h -include ./include/linux/kconfig.h -D__KERNEL__ -I ./arch/powerpc -DHAVE_AS_ATHIGH=1 -fmacro-prefix-map=./= -D__ASSEMBLY__ -fno-PIE -m64 -Wl,-a64 -mabi=elfv1 -Wa,-me500 -Wa,-me500mc -mabi=elfv1 -mbig-endian -Wl,-soname=linux-vdso64.so.1 -D__VDSO64__ -s -c -o arch/powerpc/kernel/vdso/gettimeofday-64.o arch/powerpc/kernel/vdso/gettimeofday.S
arch/powerpc/kernel/vdso/gettimeofday.S: Assembler messages:
arch/powerpc/kernel/vdso/gettimeofday.S:72: Error: unrecognized opcode: `stdu'
arch/powerpc/kernel/vdso/gettimeofday.S:72: Error: unrecognized opcode: `stdu'
arch/powerpc/kernel/vdso/gettimeofday.S:72: Error: unrecognized opcode: `std'
arch/powerpc/kernel/vdso/gettimeofday.S:72: Error: unrecognized opcode: `std'
arch/powerpc/kernel/vdso/gettimeofday.S:72: Error: unrecognized opcode: `ld'
arch/powerpc/kernel/vdso/gettimeofday.S:72: Error: unrecognized opcode: `ld'
...
make[1]: *** [arch/powerpc/kernel/vdso/Makefile:76: arch/powerpc/kernel/vdso/gettimeofday-64.o] Error 1
make: *** [arch/powerpc/Makefile:387: vdso_prepare] Error 2
This is due to assembler being called with -me500mc which is
a 32 bits target.
The problem comes from the fact that CONFIG_PPC_E500MC is selected for
both the e500mc (32 bits) and the e5500 (64 bits), and therefore the
following makefile rule is wrong:
cpu-as-$(CONFIG_PPC_E500MC) += $(call as-option,-Wa$(comma)-me500mc)
Today we have CONFIG_TARGET_CPU which provides the identification of the
expected CPU, it is used for GCC. Once GCC knows the target CPU, it adds
the correct CPU option to assembler, no need to add it explicitly.
With that change (And also commit
45f7091aac35 ("powerpc/64: Set default
CPU in Kconfig")), it now is:
powerpc64-linux-gcc -Wp,-MMD,arch/powerpc/kernel/vdso/.gettimeofday-64.o.d -nostdinc -I./arch/powerpc/include -I./arch/powerpc/include/generated -I./include -I./arch/powerpc/include/uapi -I./arch/powerpc/include/generated/uapi -I./include/uapi -I./include/generated/uapi -include ./include/linux/compiler-version.h -include ./include/linux/kconfig.h -D__KERNEL__ -I ./arch/powerpc -DHAVE_AS_ATHIGH=1 -fmacro-prefix-map=./= -D__ASSEMBLY__ -fno-PIE -m64 -Wl,-a64 -mabi=elfv1 -mcpu=e500mc64 -mabi=elfv1 -mbig-endian -Wl,-soname=linux-vdso64.so.1 -D__VDSO64__ -s -c -o arch/powerpc/kernel/vdso/gettimeofday-64.o arch/powerpc/kernel/vdso/gettimeofday.S
Reported-by: Jan-Benedict Glaw <jbglaw@lug-owl.de>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Pali Rohár <pali@kernel.org>
[mpe: Retain -Wa,-mpower4 -Wa,-many for Book3S 64 builds for now]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/758ad54128fa9dd2fdedc4c511592111cbded900.1671475543.git.christophe.leroy@csgroup.eu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Shawn Wang [Tue, 17 Jan 2023 21:14:50 +0000 (13:14 -0800)]
x86/resctrl: Clear staged_config[] before and after it is used
commit
0424a7dfe9129b93f29b277511a60e87f052ac6b upstream.
As a temporary storage, staged_config[] in rdt_domain should be cleared
before and after it is used. The stale value in staged_config[] could
cause an MSR access error.
Here is a reproducer on a system with 16 usable CLOSIDs for a 15-way L3
Cache (MBA should be disabled if the number of CLOSIDs for MB is less than
16.) :
mount -t resctrl resctrl -o cdp /sys/fs/resctrl
mkdir /sys/fs/resctrl/p{1..7}
umount /sys/fs/resctrl/
mount -t resctrl resctrl /sys/fs/resctrl
mkdir /sys/fs/resctrl/p{1..8}
An error occurs when creating resource group named p8:
unchecked MSR access error: WRMSR to 0xca0 (tried to write 0x00000000000007ff) at rIP: 0xffffffff82249142 (cat_wrmsr+0x32/0x60)
Call Trace:
<IRQ>
__flush_smp_call_function_queue+0x11d/0x170
__sysvec_call_function+0x24/0xd0
sysvec_call_function+0x89/0xc0
</IRQ>
<TASK>
asm_sysvec_call_function+0x16/0x20
When creating a new resource control group, hardware will be configured
by the following process:
rdtgroup_mkdir()
rdtgroup_mkdir_ctrl_mon()
rdtgroup_init_alloc()
resctrl_arch_update_domains()
resctrl_arch_update_domains() iterates and updates all resctrl_conf_type
whose have_new_ctrl is true. Since staged_config[] holds the same values as
when CDP was enabled, it will continue to update the CDP_CODE and CDP_DATA
configurations. When group p8 is created, get_config_index() called in
resctrl_arch_update_domains() will return 16 and 17 as the CLOSIDs for
CDP_CODE and CDP_DATA, which will be translated to an invalid register -
0xca0 in this scenario.
Fix it by clearing staged_config[] before and after it is used.
[reinette: re-order commit tags]
Fixes:
75408e43509e ("x86/resctrl: Allow different CODE/DATA configurations to be staged")
Suggested-by: Xin Hao <xhao@linux.alibaba.com>
Signed-off-by: Shawn Wang <shawnwang@linux.alibaba.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Tested-by: Reinette Chatre <reinette.chatre@intel.com>
Cc:stable@vger.kernel.org
Link: https://lore.kernel.org/all/2fad13f49fbe89687fc40e9a5a61f23a28d1507a.1673988935.git.reinette.chatre%40intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nikita Zhandarovich [Mon, 6 Mar 2023 16:06:56 +0000 (08:06 -0800)]
x86/mm: Fix use of uninitialized buffer in sme_enable()
commit
cbebd68f59f03633469f3ecf9bea99cd6cce3854 upstream.
cmdline_find_option() may fail before doing any initialization of
the buffer array. This may lead to unpredictable results when the same
buffer is used later in calls to strncmp() function. Fix the issue by
returning early if cmdline_find_option() returns an error.
Found by Linux Verification Center (linuxtesting.org) with static
analysis tool SVACE.
Fixes:
aca20d546214 ("x86/mm: Add support to make use of Secure Memory Encryption")
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Cc: <stable@kernel.org>
Link: https://lore.kernel.org/r/20230306160656.14844-1-n.zhandarovich@fintech.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Yazen Ghannam [Wed, 1 Mar 2023 22:14:20 +0000 (22:14 +0000)]
x86/mce: Make sure logged MCEs are processed after sysfs update
commit
4783b9cb374af02d49740e00e2da19fd4ed6dec4 upstream.
A recent change introduced a flag to queue up errors found during
boot-time polling. These errors will be processed during late init once
the MCE subsystem is fully set up.
A number of sysfs updates call mce_restart() which goes through a subset
of the CPU init flow. This includes polling MCA banks and logging any
errors found. Since the same function is used as boot-time polling,
errors will be queued. However, the system is now past late init, so the
errors will remain queued until another error is found and the workqueue
is triggered.
Call mce_schedule_work() at the end of mce_restart() so that queued
errors are processed.
Fixes:
3bff147b187d ("x86/mce: Defer processing of early errors")
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230301221420.2203184-1-yazen.ghannam@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
projects / platform / kernel / linux-starfive.git / log