review.tizen.org Git - platform/kernel/linux-starfive.git/log

pinctrl: aspeed: fix unmet dependencies on MFD_SYSCON for PINCTRL_ASPEED

When PINCTRL_ASPEED_G* is selected,
and MFD_SYSCON is not selected,
Kbuild gives the following warnings:

WARNING: unmet direct dependencies detected for PINCTRL_ASPEED
  Depends on [n]: PINCTRL [=y] && (ARCH_ASPEED [=n] || COMPILE_TEST [=y]) && OF [=y] && MFD_SYSCON [=n]
  Selected by [y]:
  - PINCTRL_ASPEED_G4 [=y] && PINCTRL [=y] && (MACH_ASPEED_G4 [=n] || COMPILE_TEST [=y]) && OF [=y]

WARNING: unmet direct dependencies detected for PINCTRL_ASPEED
  Depends on [n]: PINCTRL [=y] && (ARCH_ASPEED [=n] || COMPILE_TEST [=y]) && OF [=y] && MFD_S>
  Selected by [y]:
  - PINCTRL_ASPEED_G5 [=y] && PINCTRL [=y] && (MACH_ASPEED_G5 [=n] || COMPILE_TEST [=y]) && O>

WARNING: unmet direct dependencies detected for PINCTRL_ASPEED
  Depends on [n]: PINCTRL [=y] && (ARCH_ASPEED [=n] || COMPILE_TEST [=y]) && OF [=y] && MFD_S>
  Selected by [y]:
  - PINCTRL_ASPEED_G6 [=y] && PINCTRL [=y] && (MACH_ASPEED_G6 [=n] || COMPILE_TEST [=y]) && O>

This is because MACH_ASPEED_G* depend on (ARCH_ASPEED || COMPILE_TEST).
ARCH_ASPEED enables the MFD_SYSCON dependency, but COMPILE_TEST doesn't.

These unmet dependency bugs were detected by Kismet,
a static analysis tool for Kconfig. Please advise
if this is not the appropriate solution.

Signed-off-by: Julian Braha <julianbraha@gmail.com>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Link: https://lore.kernel.org/r/20211215214022.146391-1-julianbraha@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Merge tag 'intel-pinctrl-v5.17-3' of gitolite.pub/scm/linux/kernel/git/pinctrl/intel into devel

intel-pinctrl for v5.17-3

* Intel Baytrail and Cherryview IRQ related fixes

The following is an automated git shortlog grouped by driver:

baytrail:
-  Set IRQCHIP_SET_TYPE_MASKED flag on the irqchip

cherryview:
-  Use temporary variable for struct device
-  Do not allow the same interrupt line to be used by 2 pins
-  Don't use selection 0 to mark an interrupt line as unused

pinctrl: Get rid of duplicate of_node assignment in the drivers

GPIO library does copy the of_node from the parent device of
the GPIO chip, there is no need to repeat this in the individual
drivers. Remove these assignment all at once.

For the details one may look into the of_gpio_dev_init() implementation.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20211214125855.33207-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl-sunxi: don't call pinctrl_gpio_direction()

Set the direction directly without calling pinctrl_gpio_direction().
This avoids the mutex_lock() calls in that function, which would
invalid the can_sleep = false.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Link: https://lore.kernel.org/r/20211206131648.1521868-4-hverkuil-cisco@xs4all.nl
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl-bcm2835: don't call pinctrl_gpio_direction()

Set the direction directly without calling pinctrl_gpio_direction().
This avoids the mutex_lock() calls in that function, which would
invalid the can_sleep = false.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20211206131648.1521868-3-hverkuil-cisco@xs4all.nl
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: bcm2835: Silence uninit warning

The uninitialized variable would be caught by the BUG_ON()
logic below, but the kernel test robot cannot see that.
Silence the warning by initializing the variable.

Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/20211209134513.306212-1-linus.walleij@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: Sort Kconfig and Makefile entries alphabetically

Sort Kconfig and Makefile entries alphabetically for better maintenance
in the future.

While at it fix some style issues, such as:
  - "Say Y"/"Say yes"/"Say Yes" --> "Say Y"
  - "pullup/pulldown" --> "pull-up and pull-down"
  - wrong indentation

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20211209113456.33977-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: Add Intel Thunder Bay pinctrl driver

About Intel Thunder Bay:
-----------------------
Intel Thunder Bay is a computer vision AI accelerator SoC based on ARM CPU.

Pinctrl IP:
----------
The SoC has a customised pinmux controller IP which controls pin
multiplexing and configuration.

Thunder Bay pinctrl IP is not based on and have nothing in common with the
existing pinctrl drivers. The registers used are incompatible with the
existing drivers, so it requires a new driver.

Add pinctrl driver to enable pin control support in the Intel Thunder Bay
SoC.

Co-developed-by: Kiran Kumar S <kiran.kumar1.s@intel.com>
Signed-off-by: Kiran Kumar S <kiran.kumar1.s@intel.com>
Signed-off-by: Lakshmi Sowjanya D <lakshmi.sowjanya.d@intel.com>
Link: https://lore.kernel.org/r/20211201072626.19599-3-lakshmi.sowjanya.d@intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

dt-bindings: pinctrl: Add bindings for Intel Thunderbay pinctrl driver

Add Device Tree bindings documentation and an entry in MAINTAINERS file
for Intel Thunder Bay SoC's pin controller.

Signed-off-by: Lakshmi Sowjanya D <lakshmi.sowjanya.d@intel.com>
Link: https://lore.kernel.org/r/20211201072626.19599-2-lakshmi.sowjanya.d@intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: qcom: Add SM8450 pinctrl driver

This adds pincontrol driver for tlmm block found in SM8450 SoC

This patch is based on initial code downstream by
Elliot Berman <eberman@codeaurora.org>

Signed-off-by: Vinod Koul <vkoul@kernel.org>
Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211201072434.3968768-3-vkoul@kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

dt-bindings: pinctrl: qcom: Add SM8450 pinctrl bindings

Add device tree binding Documentation details for Qualcomm SM8450
TLMM device

Signed-off-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211201072434.3968768-2-vkoul@kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Merge tag 'renesas-pinctrl-for-v5.17-tag1' of git://git./linux/kernel/git/geert/renesas-drivers into devel

pinctrl: renesas: Updates for v5.17

  - Add generic support for output impedance,
  - Add drive strength and output impedance support for the RZ/G2L SoC,
  - Miscellaneous fixes and improvements.

dt-bindings: pinctrl: use pinctrl.yaml

Also fix some examples to avoid warnings like:
brcm,ns-pinmux.example.dt.yaml: pin-controller@1800c1c0: $nodename:0: 'pin-controller@1800c1c0' does not match '^pinctrl|pinmux@[0-9a-f]+$'

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211202063216.24439-1-zajec5@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: spear: plgpio: Introduce regmap phandle

Resources need to be shared between pinmux and plgpio.

Introduce regmap phandle in order to retrieve the regmap
from the phandle if the property is present.
This allows to retrieve an external regmap (ie the one
used by pinmux if the phandle references the pinmux node)
from plgpio.

Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lore.kernel.org/r/20211202095255.165797-4-herve.codina@bootlin.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: spear: plgpio: Convert to regmap

Resources need to be shared between pinmux and plgpio.

Use regmap (syscon) to access resources to allow an
easy way to share resources.

Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lore.kernel.org/r/20211202095255.165797-3-herve.codina@bootlin.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: spear: spear: Convert to regmap

Resources need to be shared between pinmux and plgpio.

Use regmap (syscon) to access resources to allow an
easy way to share resources.

Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lore.kernel.org/r/20211202095255.165797-2-herve.codina@bootlin.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

dt-bindings: pinctrl: convert controller description to the json-schema

This helps validating DTS and writing YAML files.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211110165720.30242-1-zajec5@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: apple-gpio: fix flexible_array.cocci warnings

Zero-length and one-element arrays are deprecated, see
Documentation/process/deprecated.rst
Flexible-array members should be used instead.

Generated by: scripts/coccinelle/misc/flexible_array.cocci

CC: Joey Gouly <joey.gouly@arm.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: kernel test robot <lkp@intel.com>
Signed-off-by: Julia Lawall <julia.lawall@inria.fr>
Link: https://lore.kernel.org/r/alpine.DEB.2.22.394.2111271859250.2864@hadrien
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: mediatek: add a check for error in mtk_pinconf_bias_get_rsel()

All the other mtk_hw_get_value() calls have a check for "if (err)" so
we can add one here as well.  This silences a Smatch warning:

    drivers/pinctrl/mediatek/pinctrl-mtk-common-v2.c:819 mtk_pinconf_bias_get_rsel()
    error: uninitialized symbol 'pd'.

Fixes: fb34a9ae383a ("pinctrl: mediatek: support rsel feature")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20211127140836.GB24002@kili
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: mediatek: uninitialized variable in mtk_pctrl_show_one_pin()

The "try_all_type" variable is not set if (hw->soc->pull_type) is false
leading to the following Smatch warning:

drivers/pinctrl/mediatek/pinctrl-paris.c:599 mtk_pctrl_show_one_pin()
error: uninitialized symbol 'try_all_type'.

Fixes: fb34a9ae383a ("pinctrl: mediatek: support rsel feature")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20211127140750.GA24002@kili
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: freescale: Add i.MXRT1050 pinctrl driver support

Add the pinctrl driver support for i.MXRT1050.

Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Jesse Taube <Mr.Bossman075@gmail.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20211125211443.1150135-5-Mr.Bossman075@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

dt-bindings: pinctrl: add i.MXRT1050 pinctrl binding doc

Add i.MXRT1050 pinctrl binding doc

Cc: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Jesse Taube <Mr.Bossman075@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211125211443.1150135-3-Mr.Bossman075@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl/rockchip: fix gpio device creation

GPIO nodes are not themselves busses, so passing rockchip_bank_match
here is wrong. Passing NULL instead uses the standard bus match table
which is more appropriate.

devm_of_platform_populate() shows that this is the normal way to call
of_platform_populate() from a device driver, so in order to match that
more closely also add the pinctrl device as the parent for the newly
created GPIO controllers.

Specifically, using the wrong match here can break dynamic GPIO hogs as
marking the GPIO bank as a bus means that of_platform_notify() will set
OF_POPULATED on new child nodes and if this happens before
of_gpio_notify() is called then the new hog will be skipped as
OF_POPULATED is already set.

Fixes: 9ce9a02039de ("pinctrl/rockchip: drop the gpio related codes")
Signed-off-by: John Keeping <john@metanate.com>
Link: https://lore.kernel.org/r/20211126151352.1509583-1-john@metanate.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Revert "dt-bindings: pinctrl: qcom: Add SDX65 pinctrl bindings"

This reverts commit 3fe59cc4ff641b106cc24930204d4cd2c82f318f.
The bindings were not properly reviewed and were also
causing errors in the automatic checkers once applied.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: apple: return an error if pinmux is missing in the DT

If of_property_count_u32_elems returned 0, return -EINVAL to indicate
a failure. Previously this would return 0.

Fixes: a0f160ffcb83 ("pinctrl: add pinctrl/GPIO driver for Apple SoCs")
Signed-off-by: Joey Gouly <joey.gouly@arm.com>
Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20211121165642.27883-12-joey.gouly@arm.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: apple: use modulo rather than bitwise and

This expresses the intention clearer.

Signed-off-by: Joey Gouly <joey.gouly@arm.com>
Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20211121165642.27883-11-joey.gouly@arm.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: apple: don't set gpio_chip.of_node

The gpio core code sets of_node, so no need to do it here.

Signed-off-by: Joey Gouly <joey.gouly@arm.com>
Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20211121165642.27883-10-joey.gouly@arm.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: apple: remove gpio-controller check

Having this missing, but everything else valid shouldn't result
in a failure.

Signed-off-by: Joey Gouly <joey.gouly@arm.com>
Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20211121165642.27883-9-joey.gouly@arm.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: apple: give error label a specific name

Signed-off-by: Joey Gouly <joey.gouly@arm.com>
Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20211121165642.27883-8-joey.gouly@arm.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: apple: make apple_gpio_get_direction more readable

Try to make this more readable by not using a long line with
a ternary operator.

Signed-off-by: Joey Gouly <joey.gouly@arm.com>
Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20211121165642.27883-7-joey.gouly@arm.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: apple: handle regmap_read errors

Explicitly return 0 if the regmap_read fails.
Also change a uint32_t to a u32.

Signed-off-by: Joey Gouly <joey.gouly@arm.com>
Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20211121165642.27883-6-joey.gouly@arm.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: apple: add missing bits.h header

This is needed for the BIT(n) macro.

Signed-off-by: Joey Gouly <joey.gouly@arm.com>
Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20211121165642.27883-5-joey.gouly@arm.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: apple: use C style comment

This is the preferred comment style.

Signed-off-by: Joey Gouly <joey.gouly@arm.com>
Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20211121165642.27883-4-joey.gouly@arm.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: apple: add missing comma

Add a missing comma at the end of the regmap initialisation.

Signed-off-by: Joey Gouly <joey.gouly@arm.com>
Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20211121165642.27883-3-joey.gouly@arm.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: apple: fix some formatting issues

Reflow some of the code now that the extra '_gpio' was removed.

Signed-off-by: Joey Gouly <joey.gouly@arm.com>
Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20211121165642.27883-2-joey.gouly@arm.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Merge tag 'v5.16-rc2' into devel

Linux 5.16-rc2 is needed because nonurgent fixes headed
for next are strongly textually dependent on a fix that
was applied for rc2.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: cherryview: Use temporary variable for struct device

Use temporary variable for struct device to make code neater.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

pinctrl: cherryview: Do not allow the same interrupt line to be used by 2 pins

It is impossible to use the same interrupt line for 2 pins, this will
result in the interrupts only being delivered to the IRQ handler for
the pin for which chv_gpio_irq_type() was called last.

The pinctrl-cherryview.c code relies on the BIOS to correctly setup the
interrupt line, but there is a BIOS bug on at least the Medion Akoya E1239T
and the GPD win models where both INT33FF:02 pin 8, used by the powerbutton
and INT33FF:02 pin 21 used as IRQ input for the accelerometer are mapped to
interrupt line 0.

This causes 2 problems:
1. The accelerometer IRQ does not work, since the power button is probed
later taking over the intr_lines[0] slot.

2. Since the accelerometer IRQ is not marked as wakeup, interrupt line 0
gets masked on suspend, causing the power button to not work to wake
the system from suspend.

Likewise on the Lenovo Yogabook, which has a touchscreen as keyboard
and the keyboard half of the tablet also has a Wacom digitizer, the BIOS
by default assigns the same interrupt line to the GPIOs used
for their interrupts.

Fix these problems by adding a check for this and assigning a new
interrupt line to the 2nd pin for which chv_gpio_irq_type() gets called.

With this fix in place the following 2 messages show up in dmesg on
the Medion Akoya E1239T and the GPD win:

cherryview-pinctrl INT33FF:02: interrupt line 0 is used by both pin 21 and pin 8
cherryview-pinctrl INT33FF:02: changing the interrupt line for pin 8 to 15

And the following gets logged on the Lenovo Yogabook:

cherryview-pinctrl INT33FF:01: interrupt-line 0 is used by both pin 49 and pin 56
cherryview-pinctrl INT33FF:01: changing the interrupt line for pin 56 to 7

Note commit 9747070c11d6 ("Input: axp20x-pek - always register interrupt
handlers") was added as a work around for the power button not being able
to wakeup the system. This relies on using the PMIC's connection to the
power button but that only works on systems with the AXP288 PMIC.
Once this fix has been merged that workaround can be removed.

Cc: Yauhen Kharuzhy <jekhor@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

pinctrl: cherryview: Don't use selection 0 to mark an interrupt line as unused

The selection 0 is a perfectly valid, so stop using it to have
the special meaning of interrupt line not used in the intr_lines.

Instead introduce a special CHV_INVALID_HWIRQ value, derived
from INVALID_HWIRQ. which is never a valid selection and use
that to indicate unused interrupt lines.

Cc: Yauhen Kharuzhy <jekhor@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

dt-bindings: pinctrl: qcom: pmic-gpio: Document pm8226 compatible

Suggested-by: Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
Signed-off-by: Dominik Kobinski <dominikkobinski314@gmail.com>
Link: https://lore.kernel.org/r/20211125215626.62447-1-dominikkobinski314@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: baytrail: Set IRQCHIP_SET_TYPE_MASKED flag on the irqchip

The byt_irq_type function ends with the IRQ masked, this means that calls
to irq_set_irq_type() while the IRQ is enabled end up masking it, which
is wrong. Add the IRQCHIP_SET_TYPE_MASKED flag to fix this.

This will make the IRQ core call mask() + unmask() on the IRQ around
a set_type() call when the IRQ is enabled at the type of the call.

Note in practice irq_set_irq_type() getting called while the IRQ is enabled
almost never happens. I hit this with a buggy DSDT where a wrongly active
(_STA returns 0xf) I2C ACPI devices point to an IRQ already in use by an
_AEI handler, leading to the irq_set_irq_type() call in
acpi_dev_gpio_irq_get_by() getting called while the IRQ is enabled.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

pinctrl: microchip-sgpio: update to support regmap

Adopt regmap instead of a direct memory map so that custom regmaps and
other interfaces can be supported.

Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Link: https://lore.kernel.org/r/20211119195928.2498441-5-colin.foster@in-advantage.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: ocelot: convert pinctrl to regmap

In order to allow external control via SPI, memory-mapped areas must be
changed to use the generic regmap interface. This is step 1, and is
followed by an implementation that allows a custom regmap.

Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Link: https://lore.kernel.org/r/20211119195928.2498441-4-colin.foster@in-advantage.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: ocelot: update pinctrl to automatic base address

struct gpio_chip recommends passing -1 as base to gpiolib. Doing so avoids
conflicts when the chip is external and gpiochip0 already exists.

Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Tested-by: Clément Léger <clement.leger@bootlin.com>
Link: https://lore.kernel.org/r/20211119195928.2498441-3-colin.foster@in-advantage.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: ocelot: combine get resource and ioremap into single call

Simple cleanup to make two function calls only one.

Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Link: https://lore.kernel.org/r/20211119195928.2498441-2-colin.foster@in-advantage.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

dt-bindings: pinctrl: uniphier: Add child node definitions to describe pin mux and configuration

In arch/arm/boot/dts/uniphier-pinctrl.dtsi, there are child nodes of
pinctrl that defines pinmux and pincfg, however, there are no rules about
that in dt-bindings.

'make dtbs_check' results an error with the following message:

pinctrl: 'ain1', 'ain2', 'ainiec1', 'aout', 'aout1', 'aout2', ...
... 'usb2', 'usb3' do not match any of the regexes: 'pinctrl-[0-9]+'

To avoid the issue, add the rules of pinmux and pincfg in each child node
and grandchild node.

Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/1636416699-21033-1-git-send-email-hayashi.kunihiko@socionext.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

dt-bindings: qcom,pmic-gpio: Add pm2250 compatible string

Add compatible strings for pm2250 SPMI GPIO to documentation.

Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Link: https://lore.kernel.org/r/1637076915-3280-2-git-send-email-loic.poulain@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: spmi-gpio: Add support for PM2250

PM2250, commonly combined with QCM2290, provides ten SPMI GPIOs.

Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Link: https://lore.kernel.org/r/1637076915-3280-1-git-send-email-loic.poulain@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: qcom: sc7280: Add egpio support

sc7280 supports the egpio feature, GPIOs ranging from 144 to 174
(31 GPIOs) support it, we define gpio_func to 9, which
is an unused function for all these pins on sc7280.

Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1637041084-3299-2-git-send-email-rnayak@codeaurora.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: qcom: Add egpio feature support

egpio is a scheme which allows special power Island Domain IOs
(LPASS,SSC) to be reused as regular chip GPIOs by muxing regular
TLMM functions with Island Domain functions.
With this scheme, an IO can be controlled both by the cpu running
linux and the Island processor. This provides great flexibility to
re-purpose the Island IOs for regular TLMM usecases.

2 new bits are added to ctl_reg, egpio_present is a read only bit
which shows if egpio feature is available or not on a given gpio.
egpio_enable is the read/write bit and only effective if egpio_present
is 1. Once its set, the Island IO is controlled from Chip TLMM.
egpio_enable when set to 0 means the GPIO is used as Island Domain IO.

To support this we add a new function 'egpio' which can be used to
set the egpio_enable to 0, for any other TLMM controlled functions
we set the egpio_enable to 1.

Signed-off-by: Prasad Sodagudi <psodagud@codeaurora.org>
Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Link: https://lore.kernel.org/r/1637041084-3299-1-git-send-email-rnayak@codeaurora.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: qcom-pmic-gpio: Add support for pm8019

PM8019 provides 6 GPIOs. Add a compatible to support that.

Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211112115342.17100-2-konrad.dybcio@somainline.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

dt-bindings: pinctrl: qcom,pmic-gpio: Add compatible for PM8019

Add pmic-gpio compatible string for pm8019 pmic.

Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211112115342.17100-1-konrad.dybcio@somainline.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: qcom: Add SDX65 pincontrol driver

Add initial Qualcomm SDX65 pinctrl driver to support pin configuration
with pinctrl framework for SDX65 SoC.

Signed-off-by: Vamsi Krishna Lanka <quic_vamslank@quicinc.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/13acb3cb36349487dee9745ab040d8f1344d2096.1637048107.git.quic_vamslank@quicinc.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

dt-bindings: pinctrl: qcom: Add SDX65 pinctrl bindings

Add device tree binding Documentation details for Qualcomm SDX65
pinctrl driver.

Signed-off-by: Vamsi Krishna Lanka <quic_vamslank@quicinc.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/06234768890dc7572226f23d432e5a69a4d5b305.1637048107.git.quic_vamslank@quicinc.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: ocelot: Extend support for lan966x

This patch extends pinctrl-ocelot driver to support also the
lan966x. Register layout is same as ocelot. It has 78 GPIOs.
Requires 3 registers ALT0, ALT1, ALT2 to configure ALT mode.

Signed-off-by: Kavyasree Kotagiri <kavyasree.kotagiri@microchip.com>
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20211118112548.14582-3-kavyasree.kotagiri@microchip.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

dt-bindings: pinctrl: ocelot: add lan966x SoC support

Add documentation for the compatible designated for lan966x.

Signed-off-by: Kavyasree Kotagiri <kavyasree.kotagiri@microchip.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211118112548.14582-2-kavyasree.kotagiri@microchip.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Linux 5.16-rc2

Merge tag 'x86-urgent-2021-11-21' of git://git./linux/kernel/git/tip/tip

Pull x86 fixes from Thomas Gleixner:

- Move the command line preparation and the early command line parsing
   earlier so that the command line parameters which affect
   early_reserve_memory(), e.g. efi=nosftreserve, are taken into
   account. This was broken when the invocation of
   early_reserve_memory() was moved recently.

- Use an atomic type for the SGX page accounting, which is read and
   written locklessly, to plug various race conditions related to it.

* tag 'x86-urgent-2021-11-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/sgx: Fix free page accounting
  x86/boot: Pull up cmdline preparation and early param parsing

Merge tag 'perf-urgent-2021-11-21' of git://git./linux/kernel/git/tip/tip

Pull x86 perf fixes from Thomas Gleixner:

- Remove unneded PEBS disabling when taking LBR snapshots to prevent an
   unchecked MSR access error.

- Fix IIO event constraints for Snowridge and Skylake server chips.

* tag 'perf-urgent-2021-11-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/perf: Fix snapshot_branch_stack warning in VM
  perf/x86/intel/uncore: Fix IIO event constraints for Snowridge
  perf/x86/intel/uncore: Fix IIO event constraints for Skylake Server
  perf/x86/intel/uncore: Fix filter_tid mask for CHA events on Skylake Server

Merge tag 'powerpc-5.16-2' of git://git./linux/kernel/git/powerpc/linux

Pull more powerpc fixes from Michael Ellerman:

- Fix a bug in copying of sigset_t for 32-bit systems, which caused X
   to not start.

- Fix handling of shared LSIs (rare) with the xive interrupt controller
   (Power9/10).

- Fix missing TOC setup in some KVM code, which could result in oopses
   depending on kernel data layout.

- Fix DMA mapping when we have persistent memory and only one DMA
   window available.

- Fix further problems with STRICT_KERNEL_RWX on 8xx, exposed by a
   recent fix.

- A couple of other minor fixes.

Thanks to Alexey Kardashevskiy, Aneesh Kumar K.V, Cédric Le Goater,
Christian Zigotzky, Christophe Leroy, Daniel Axtens, Finn Thain, Greg
Kurz, Masahiro Yamada, Nicholas Piggin, and Uwe Kleine-König.

* tag 'powerpc-5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/xive: Change IRQ domain to a tree domain
  powerpc/8xx: Fix pinned TLBs with CONFIG_STRICT_KERNEL_RWX
  powerpc/signal32: Fix sigset_t copy
  powerpc/book3e: Fix TLBCAM preset at boot
  powerpc/pseries/ddw: Do not try direct mapping with persistent memory and one window
  powerpc/pseries/ddw: simplify enable_ddw()
  powerpc/pseries/ddw: Revert "Extend upper limit for huge DMA window for persistent memory"
  powerpc/pseries: Fix numa FORM2 parsing fallback code
  powerpc/pseries: rename numa_dist_table to form2_distances
  powerpc: clean vdso32 and vdso64 directories
  powerpc/83xx/mpc8349emitx: Drop unused variable
  KVM: PPC: Book3S HV: Use GLOBAL_TOC for kvmppc_h_set_dabr/xdabr()

pstore/blk: Use "%lu" to format unsigned long

On 32-bit:

    fs/pstore/blk.c: In function ‘__best_effort_init’:
    include/linux/kern_levels.h:5:18: warning: format ‘%zu’ expects argument of type ‘size_t’, but argument 3 has type ‘long unsigned int’ [-Wformat=]
5 | #define KERN_SOH "\001"  /* ASCII Start Of Header */
  |                  ^~~~~~
    include/linux/kern_levels.h:14:19: note: in expansion of macro ‘KERN_SOH’
       14 | #define KERN_INFO KERN_SOH "6" /* informational */
  |                   ^~~~~~~~
    include/linux/printk.h:373:9: note: in expansion of macro ‘KERN_INFO’
      373 |  printk(KERN_INFO pr_fmt(fmt), ##__VA_ARGS__)
  |         ^~~~~~~~~
    fs/pstore/blk.c:314:3: note: in expansion of macro ‘pr_info’
      314 |   pr_info("attached %s (%zu) (no dedicated panic_write!)\n",
  |   ^~~~~~~

Cc: stable@vger.kernel.org
Fixes: 7bb9557b48fcabaa ("pstore/blk: Use the normal block device I/O path")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210629103700.1935012-1-geert@linux-m68k.org
Cc: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge branch 'akpm' (patches from Andrew)

Merge misc fixes from Andrew Morton:
"15 patches.

  Subsystems affected by this patch series: ipc, hexagon, mm (swap,
  slab-generic, kmemleak, hugetlb, kasan, damon, and highmem), and proc"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  proc/vmcore: fix clearing user buffer by properly using clear_user()
  kmap_local: don't assume kmap PTEs are linear arrays in memory
  mm/damon/dbgfs: fix missed use of damon_dbgfs_lock
  mm/damon/dbgfs: use '__GFP_NOWARN' for user-specified size buffer allocation
  kasan: test: silence intentional read overflow warnings
  hugetlb, userfaultfd: fix reservation restore on userfaultfd error
  hugetlb: fix hugetlb cgroup refcounting during mremap
  mm: kmemleak: slob: respect SLAB_NOLEAKTRACE flag
  hexagon: ignore vmlinux.lds
  hexagon: clean up timer-regs.h
  hexagon: export raw I/O routines for modules
  mm: emit the "free" trace report before freeing memory in kmem_cache_free()
  shm: extend forced shm destroy to support objects from several IPC nses
  ipc: WARN if trying to remove ipc object which is absent
  mm/swap.c:put_pages_list(): reinitialise the page list

Merge tag 'block-5.16-2021-11-19' of git://git.kernel.dk/linux-block

Pull block fixes from Jens Axboe:

- Flip a cap check to avoid a selinux error (Alistair)

- Fix for a regression this merge window where we can miss a queue ref
   put (me)

- Un-mark pstore-blk as broken, as the condition that triggered that
   change has been rectified (Kees)

- Queue quiesce and sync fixes (Ming)

- FUA insertion fix (Ming)

- blk-cgroup error path put fix (Yu)

* tag 'block-5.16-2021-11-19' of git://git.kernel.dk/linux-block:
  blk-mq: don't insert FUA request with data into scheduler queue
  blk-cgroup: fix missing put device in error path from blkg_conf_pref()
  block: avoid to quiesce queue in elevator_init_mq
  Revert "mark pstore-blk as broken"
  blk-mq: cancel blk-mq dispatch work in both blk_cleanup_queue and disk_release()
  block: fix missing queue put in error path
  block: Check ADMIN before NICE for IOPRIO_CLASS_RT

Merge tag 'pinctrl-v5.16-2' of git://git./linux/kernel/git/linusw/linux-pinctrl

Pull pin control fixes from Linus Walleij:
"There is an ACPI stubs fix which is ACKed by the ACPI maintainer for
  merging through my tree.

  One item stand out and that is that I delete the <linux/sdb.h> header
  that is used by nothing. I deleted this subsystem (through the GPIO
  tree) a while back so I feel responsible for tidying up the floor.

  Other than that it is the usual mistakes, a bit noisy around build
  issue and Kconfig then driver fixes.

  Specifics:

   - Fix some stubs causing compile issues for ACPI.

   - Fix some wakeups on AMD IRQs shared between GPIO and SCI.

   - Fix a build warning in the Tegra driver.

   - Fix a Kconfig issue in the Qualcomm driver.

   - Add a missing include the RALink driver.

   - Return a valid type for the Apple pinctrl IRQs.

   - Implement some Qualcomm SDM845 dual-edge errata.

   - Remove the unused <linux/sdb.h> header. (The subsystem was once
     deleted by the pinctrl maintainer...)

   - Fix a duplicate initialized in the Tegra driver.

   - Fix register offsets for UFS and SDC in the Qualcomm SM8350 driver"

* tag 'pinctrl-v5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: qcom: sm8350: Correct UFS and SDC offsets
  pinctrl: tegra194: remove duplicate initializer again
  Remove unused header <linux/sdb.h>
  pinctrl: qcom: sdm845: Enable dual edge errata
  pinctrl: apple: Always return valid type in apple_gpio_irq_type
  pinctrl: ralink: include 'ralink_regs.h' in 'pinctrl-mt7620.c'
  pinctrl: qcom: fix unmet dependencies on GPIOLIB for GPIOLIB_IRQCHIP
  pinctrl: tegra: Return const pointer from tegra_pinctrl_get_group()
  pinctrl: amd: Fix wakeups when IRQ is shared with SCI
  ACPI: Add stubs for wakeup handler functions

Merge tag 's390-5.16-3' of git://git./linux/kernel/git/s390/linux

Pull s390 updates from Heiko Carstens:

- Add missing Kconfig option for ftrace direct multi sample, so it can
   be compiled again, and also add s390 support for this sample.

- Update Christian Borntraeger's email address.

- Various fixes for memory layout setup. Besides other this makes it
   possible to load shared DCSS segments again.

- Fix copy to user space of swapped kdump oldmem.

- Remove -mstack-guard and -mstack-size compile options when building
   vdso binaries. This can happen when CONFIG_VMAP_STACK is disabled and
   results in broken vdso code which causes more or less random
   exceptions. Also remove the not needed -nostdlib option.

- Fix memory leak on cpu hotplug and return code handling in kexec
   code.

- Wire up futex_waitv system call.

- Replace snprintf with sysfs_emit where appropriate.

* tag 's390-5.16-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  ftrace/samples: add s390 support for ftrace direct multi sample
  ftrace/samples: add missing Kconfig option for ftrace direct multi sample
  MAINTAINERS: update email address of Christian Borntraeger
  s390/kexec: fix memory leak of ipl report buffer
  s390/kexec: fix return code handling
  s390/dump: fix copying to user-space of swapped kdump oldmem
  s390: wire up sys_futex_waitv system call
  s390/vdso: filter out -mstack-guard and -mstack-size
  s390/vdso: remove -nostdlib compiler flag
  s390: replace snprintf in show functions with sysfs_emit
  s390/boot: simplify and fix kernel memory layout setup
  s390/setup: re-arrange memblock setup
  s390/setup: avoid using memblock_enforce_memory_limit
  s390/setup: avoid reserving memory above identity mapping

Merge tag '5.16-rc1-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6

Pull cifs fixes from Steve French:
"Three small cifs/smb3 fixes: two to address minor coverity issues and
  one cleanup"

* tag '5.16-rc1-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: introduce cifs_ses_mark_for_reconnect() helper
  cifs: protect srv_count with cifs_tcp_ses_lock
  cifs: move debug print out of spinlock

proc/vmcore: fix clearing user buffer by properly using clear_user()

To clear a user buffer we cannot simply use memset, we have to use
clear_user().  With a virtio-mem device that registers a vmcore_cb and
has some logically unplugged memory inside an added Linux memory block,
I can easily trigger a BUG by copying the vmcore via "cp":

  systemd[1]: Starting Kdump Vmcore Save Service...
  kdump[420]: Kdump is using the default log level(3).
  kdump[453]: saving to /sysroot/var/crash/127.0.0.1-2021-11-11-14:59:22/
  kdump[458]: saving vmcore-dmesg.txt to /sysroot/var/crash/127.0.0.1-2021-11-11-14:59:22/
  kdump[465]: saving vmcore-dmesg.txt complete
  kdump[467]: saving vmcore
  BUG: unable to handle page fault for address: 00007f2374e01000
  #PF: supervisor write access in kernel mode
  #PF: error_code(0x0003) - permissions violation
  PGD 7a523067 P4D 7a523067 PUD 7a528067 PMD 7a525067 PTE 800000007048f867
  Oops: 0003 [#1] PREEMPT SMP NOPTI
  CPU: 0 PID: 468 Comm: cp Not tainted 5.15.0+ #6
  Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.14.0-27-g64f37cc530f1-prebuilt.qemu.org 04/01/2014
  RIP: 0010:read_from_oldmem.part.0.cold+0x1d/0x86
  Code: ff ff ff e8 05 ff fe ff e9 b9 e9 7f ff 48 89 de 48 c7 c7 38 3b 60 82 e8 f1 fe fe ff 83 fd 08 72 3c 49 8d 7d 08 4c 89 e9 89 e8 <49> c7 45 00 00 00 00 00 49 c7 44 05 f8 00 00 00 00 48 83 e7 f81
  RSP: 0018:ffffc9000073be08 EFLAGS: 00010212
  RAX: 0000000000001000 RBX: 00000000002fd000 RCX: 00007f2374e01000
  RDX: 0000000000000001 RSI: 00000000ffffdfff RDI: 00007f2374e01008
  RBP: 0000000000001000 R08: 0000000000000000 R09: ffffc9000073bc50
  R10: ffffc9000073bc48 R11: ffffffff829461a8 R12: 000000000000f000
  R13: 00007f2374e01000 R14: 0000000000000000 R15: ffff88807bd421e8
  FS:  00007f2374e12140(0000) GS:ffff88807f000000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 00007f2374e01000 CR3: 000000007a4aa000 CR4: 0000000000350eb0
  Call Trace:
   read_vmcore+0x236/0x2c0
   proc_reg_read+0x55/0xa0
   vfs_read+0x95/0x190
   ksys_read+0x4f/0xc0
   do_syscall_64+0x3b/0x90
   entry_SYSCALL_64_after_hwframe+0x44/0xae

Some x86-64 CPUs have a CPU feature called "Supervisor Mode Access
Prevention (SMAP)", which is used to detect wrong access from the kernel
to user buffers like this: SMAP triggers a permissions violation on
wrong access.  In the x86-64 variant of clear_user(), SMAP is properly
handled via clac()+stac().

To fix, properly use clear_user() when we're dealing with a user buffer.

Link: https://lkml.kernel.org/r/20211112092750.6921-1-david@redhat.com
Fixes: 997c136f518c ("fs/proc/vmcore.c: add hook to read_from_oldmem() to check for non-ram pages")
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Baoquan He <bhe@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Philipp Rudo <prudo@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kmap_local: don't assume kmap PTEs are linear arrays in memory

The kmap_local conversion broke the ARM architecture, because the new
code assumes that all PTEs used for creating kmaps form a linear array
in memory, and uses array indexing to look up the kmap PTE belonging to
a certain kmap index.

On ARM, this cannot work, not only because the PTE pages may be
non-adjacent in memory, but also because ARM/!LPAE interleaves hardware
entries and extended entries (carrying software-only bits) in a way that
is not compatible with array indexing.

Fortunately, this only seems to affect configurations with more than 8
CPUs, due to the way the per-CPU kmap slots are organized in memory.

Work around this by permitting an architecture to set a Kconfig symbol
that signifies that the kmap PTEs do not form a lineary array in memory,
and so the only way to locate the appropriate one is to walk the page
tables.

Link: https://lore.kernel.org/linux-arm-kernel/20211026131249.3731275-1-ardb@kernel.org/
Link: https://lkml.kernel.org/r/20211116094737.7391-1-ardb@kernel.org
Fixes: 2a15ba82fa6c ("ARM: highmem: Switch to generic kmap atomic")
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reported-by: Quanyang Wang <quanyang.wang@windriver.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/damon/dbgfs: fix missed use of damon_dbgfs_lock

DAMON debugfs is supposed to protect dbgfs_ctxs, dbgfs_nr_ctxs, and
dbgfs_dirs using damon_dbgfs_lock. However, some of the code is
accessing the variables without the protection. This fixes it by
protecting all such accesses.

Link: https://lkml.kernel.org/r/20211110145758.16558-3-sj@kernel.org
Fixes: 75c1c2b53c78 ("mm/damon/dbgfs: support multiple contexts")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/damon/dbgfs: use '__GFP_NOWARN' for user-specified size buffer allocation

Patch series "DAMON fixes".

This patch (of 2):

DAMON users can trigger below warning in '__alloc_pages()' by invoking
write() to some DAMON debugfs files with arbitrarily high count
argument, because DAMON debugfs interface allocates some buffers based
on the user-specified 'count'.

        if (unlikely(order >= MAX_ORDER)) {
                WARN_ON_ONCE(!(gfp & __GFP_NOWARN));
                return NULL;
        }

Because the DAMON debugfs interface code checks failure of the
'kmalloc()', this commit simply suppresses the warnings by adding
'__GFP_NOWARN' flag.

Link: https://lkml.kernel.org/r/20211110145758.16558-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20211110145758.16558-2-sj@kernel.org
Fixes: 4bc05954d007 ("mm/damon: implement a debugfs-based user space interface")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kasan: test: silence intentional read overflow warnings

As done in commit d73dad4eb5ad ("kasan: test: bypass __alloc_size
checks") for __write_overflow warnings, also silence some more cases
that trip the __read_overflow warnings seen in 5.16-rc1[1]:

  In file included from include/linux/string.h:253,
                   from include/linux/bitmap.h:10,
                   from include/linux/cpumask.h:12,
                   from include/linux/mm_types_task.h:14,
                   from include/linux/mm_types.h:5,
                   from include/linux/page-flags.h:13,
                   from arch/arm64/include/asm/mte.h:14,
                   from arch/arm64/include/asm/pgtable.h:12,
                   from include/linux/pgtable.h:6,
                   from include/linux/kasan.h:29,
                   from lib/test_kasan.c:10:
  In function 'memcmp',
      inlined from 'kasan_memcmp' at lib/test_kasan.c:897:2:
  include/linux/fortify-string.h:263:25: error: call to '__read_overflow' declared with attribute error: detected read beyond size of object (1st parameter)
    263 |                         __read_overflow();
        |                         ^~~~~~~~~~~~~~~~~
  In function 'memchr',
      inlined from 'kasan_memchr' at lib/test_kasan.c:872:2:
  include/linux/fortify-string.h:277:17: error: call to '__read_overflow' declared with attribute error: detected read beyond size of object (1st parameter)
    277 |                 __read_overflow();
        |                 ^~~~~~~~~~~~~~~~~

[1] http://kisskb.ellerman.id.au/kisskb/buildresult/14660585/log/

Link: https://lkml.kernel.org/r/20211116004111.3171781-1-keescook@chromium.org
Fixes: d73dad4eb5ad ("kasan: test: bypass __alloc_size checks")
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Acked-by: Marco Elver <elver@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

hugetlb, userfaultfd: fix reservation restore on userfaultfd error

Currently in the is_continue case in hugetlb_mcopy_atomic_pte(), if we
bail out using "goto out_release_unlock;" in the cases where idx >=
size, or !huge_pte_none(), the code will detect that new_pagecache_page
== false, and so call restore_reserve_on_error(). In this case I see
restore_reserve_on_error() delete the reservation, and the following
call to remove_inode_hugepages() will increment h->resv_hugepages
causing a 100% reproducible leak.

We should treat the is_continue case similar to adding a page into the
pagecache and set new_pagecache_page to true, to indicate that there is
no reservation to restore on the error path, and we need not call
restore_reserve_on_error(). Rename new_pagecache_page to
page_in_pagecache to make that clear.

Link: https://lkml.kernel.org/r/20211117193825.378528-1-almasrymina@google.com
Fixes: c7b1850dfb41 ("hugetlb: don't pass page cache pages to restore_reserve_on_error")
Signed-off-by: Mina Almasry <almasrymina@google.com>
Reported-by: James Houghton <jthoughton@google.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Wei Xu <weixugc@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

hugetlb: fix hugetlb cgroup refcounting during mremap

When hugetlb_vm_op_open() is called during copy_vma(), we may take the
reference to resv_map->css. Later, when clearing the reservation
pointer of old_vma after transferring it to new_vma, we forget to drop
the reference to resv_map->css. This leads to a reference leak of css.

Fixes this by adding a check to drop reservation css reference in
clear_vma_resv_huge_pages()

Link: https://lkml.kernel.org/r/20211113154412.91134-1-minhquangbui99@gmail.com
Fixes: 550a7d60bd5e35 ("mm, hugepages: add mremap() support for hugepage backed vma")
Signed-off-by: Bui Quang Minh <minhquangbui99@gmail.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: kmemleak: slob: respect SLAB_NOLEAKTRACE flag

When kmemleak is enabled for SLOB, system does not boot and does not
print anything to the console. At the very early stage in the boot
process we hit infinite recursion from kmemleak_init() and eventually
kernel crashes.

kmemleak_init() specifies SLAB_NOLEAKTRACE for KMEM_CACHE(), but
kmem_cache_create_usercopy() removes it because CACHE_CREATE_MASK is not
valid for SLOB.

Let's fix CACHE_CREATE_MASK and make kmemleak work with SLOB

Link: https://lkml.kernel.org/r/20211115020850.3154366-1-rkovhaev@gmail.com
Fixes: d8843922fba4 ("slab: Ignore internal flags in cache creation")
Signed-off-by: Rustam Kovhaev <rkovhaev@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Glauber Costa <glommer@parallels.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

hexagon: ignore vmlinux.lds

After building allmodconfig, there is an untracked vmlinux.lds file in
arch/hexagon/kernel:

$ git ls-files . --exclude-standard --others
arch/hexagon/kernel/vmlinux.lds

Ignore it as all other architectures have.

Link: https://lkml.kernel.org/r/20211115174250.1994179-4-nathan@kernel.org
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Cc: Brian Cain <bcain@codeaurora.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

hexagon: clean up timer-regs.h

When building allmodconfig, there is a warning about TIMER_ENABLE being
redefined:

  drivers/clocksource/timer-oxnas-rps.c:39:9: error: 'TIMER_ENABLE' macro redefined [-Werror,-Wmacro-redefined]
  #define TIMER_ENABLE            BIT(7)
          ^
  arch/hexagon/include/asm/timer-regs.h:13:9: note: previous definition is here
  #define TIMER_ENABLE            0
           ^
  1 error generated.

The values in this header are only used in one file each, if they are
used at all.  Remove the header and sink all of the constants into their
respective files.

TCX0_CLK_RATE is only used in arch/hexagon/include/asm/timex.h

TIMER_ENABLE, RTOS_TIMER_INT, RTOS_TIMER_REGS_ADDR are only used in
arch/hexagon/kernel/time.c.

SLEEP_CLK_RATE and TIMER_CLR_ON_MATCH have both been unused since the
file's introduction in commit 71e4a47f32f4 ("Hexagon: Add time and timer
functions").

TIMER_ENABLE is redefined as BIT(0) so the shift is moved into the
definition, rather than its use.

Link: https://lkml.kernel.org/r/20211115174250.1994179-3-nathan@kernel.org
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Brian Cain <bcain@codeaurora.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

hexagon: export raw I/O routines for modules

Patch series "Fixes for ARCH=hexagon allmodconfig", v2.

This series fixes some issues noticed with ARCH=hexagon allmodconfig.

This patch (of 3):

When building ARCH=hexagon allmodconfig, the following errors occur:

  ERROR: modpost: "__raw_readsl" [drivers/i3c/master/svc-i3c-master.ko] undefined!
  ERROR: modpost: "__raw_writesl" [drivers/i3c/master/dw-i3c-master.ko] undefined!
  ERROR: modpost: "__raw_readsl" [drivers/i3c/master/dw-i3c-master.ko] undefined!
  ERROR: modpost: "__raw_writesl" [drivers/i3c/master/i3c-master-cdns.ko] undefined!
  ERROR: modpost: "__raw_readsl" [drivers/i3c/master/i3c-master-cdns.ko] undefined!

Export these symbols so that modules can use them without any errors.

Link: https://lkml.kernel.org/r/20211115174250.1994179-1-nathan@kernel.org
Link: https://lkml.kernel.org/r/20211115174250.1994179-2-nathan@kernel.org
Fixes: 013bf24c3829 ("Hexagon: Provide basic implementation and/or stubs for I/O routines.")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Brian Cain <bcain@codeaurora.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: emit the "free" trace report before freeing memory in kmem_cache_free()

After the memory is freed, it can be immediately allocated by other
CPUs, before the "free" trace report has been emitted.  This causes
inaccurate traces.

For example, if the following sequence of events occurs:

    CPU 0                 CPU 1

  (1) alloc xxxxxx
  (2) free  xxxxxx
                         (3) alloc xxxxxx
                         (4) free  xxxxxx

Then they will be inaccurately reported via tracing, so that they appear
to have happened in this order:

    CPU 0                 CPU 1

  (1) alloc xxxxxx
                         (2) alloc xxxxxx
  (3) free  xxxxxx
                         (4) free  xxxxxx

This makes it look like CPU 1 somehow managed to allocate memory that
CPU 0 still had allocated for itself.

In order to avoid this, emit the "free xxxxxx" tracing report just
before the actual call to free the memory, instead of just after it.

Link: https://lkml.kernel.org/r/374eb75d-7404-8721-4e1e-65b0e5b17279@huawei.com
Signed-off-by: Yunfeng Ye <yeyunfeng@huawei.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

shm: extend forced shm destroy to support objects from several IPC nses

Currently, the exit_shm() function not designed to work properly when
task->sysvshm.shm_clist holds shm objects from different IPC namespaces.

This is a real pain when sysctl kernel.shm_rmid_forced = 1, because it
leads to use-after-free (reproducer exists).

This is an attempt to fix the problem by extending exit_shm mechanism to
handle shm's destroy from several IPC ns'es.

To achieve that we do several things:

1. add a namespace (non-refcounted) pointer to the struct shmid_kernel

2. during new shm object creation (newseg()/shmget syscall) we
   initialize this pointer by current task IPC ns

3. exit_shm() fully reworked such that it traverses over all shp's in
   task->sysvshm.shm_clist and gets IPC namespace not from current task
   as it was before but from shp's object itself, then call
   shm_destroy(shp, ns).

Note: We need to be really careful here, because as it was said before
(1), our pointer to IPC ns non-refcnt'ed.  To be on the safe side we
using special helper get_ipc_ns_not_zero() which allows to get IPC ns
refcounter only if IPC ns not in the "state of destruction".

Q/A

Q: Why can we access shp->ns memory using non-refcounted pointer?
A: Because shp object lifetime is always shorther than IPC namespace
   lifetime, so, if we get shp object from the task->sysvshm.shm_clist
   while holding task_lock(task) nobody can steal our namespace.

Q: Does this patch change semantics of unshare/setns/clone syscalls?
A: No. It's just fixes non-covered case when process may leave IPC
   namespace without getting task->sysvshm.shm_clist list cleaned up.

Link: https://lkml.kernel.org/r/67bb03e5-f79c-1815-e2bf-949c67047418@colorfullife.com
Link: https://lkml.kernel.org/r/20211109151501.4921-1-manfred@colorfullife.com
Fixes: ab602f79915 ("shm: make exit_shm work proportional to task activity")
Co-developed-by: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Alexander Mikhalitsyn <alexander.mikhalitsyn@virtuozzo.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Greg KH <gregkh@linuxfoundation.org>
Cc: Andrei Vagin <avagin@gmail.com>
Cc: Pavel Tikhomirov <ptikhomirov@virtuozzo.com>
Cc: Vasily Averin <vvs@virtuozzo.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ipc: WARN if trying to remove ipc object which is absent

Patch series "shm: shm_rmid_forced feature fixes".

Some time ago I met kernel crash after CRIU restore procedure,
fortunately, it was CRIU restore, so, I had dump files and could do
restore many times and crash reproduced easily.  After some
investigation I've constructed the minimal reproducer.  It was found
that it's use-after-free and it happens only if sysctl
kernel.shm_rmid_forced = 1.

The key of the problem is that the exit_shm() function not handles shp's
object destroy when task->sysvshm.shm_clist contains items from
different IPC namespaces.  In most cases this list will contain only
items from one IPC namespace.

How can this list contain object from different namespaces? The
exit_shm() function is designed to clean up this list always when
process leaves IPC namespace.  But we made a mistake a long time ago and
did not add a exit_shm() call into the setns() syscall procedures.

The first idea was just to add this call to setns() syscall but it
obviously changes semantics of setns() syscall and that's
userspace-visible change.  So, I gave up on this idea.

The first real attempt to address the issue was just to omit forced
destroy if we meet shp object not from current task IPC namespace [1].
But that was not the best idea because task->sysvshm.shm_clist was
protected by rwsem which belongs to current task IPC namespace.  It
means that list corruption may occur.

Second approach is just extend exit_shm() to properly handle shp's from
different IPC namespaces [2].  This is really non-trivial thing, I've
put a lot of effort into that but not believed that it's possible to
make it fully safe, clean and clear.

Thanks to the efforts of Manfred Spraul working an elegant solution was
designed.  Thanks a lot, Manfred!

Eric also suggested the way to address the issue in ("[RFC][PATCH] shm:
In shm_exit destroy all created and never attached segments") Eric's
idea was to maintain a list of shm_clists one per IPC namespace, use
lock-less lists.  But there is some extra memory consumption-related
concerns.

An alternative solution which was suggested by me was implemented in
("shm: reset shm_clist on setns but omit forced shm destroy").  The idea
is pretty simple, we add exit_shm() syscall to setns() but DO NOT
destroy shm segments even if sysctl kernel.shm_rmid_forced = 1, we just
clean up the task->sysvshm.shm_clist list.

This chages semantics of setns() syscall a little bit but in comparision
to the "naive" solution when we just add exit_shm() without any special
exclusions this looks like a safer option.

[1] https://lkml.org/lkml/2021/7/6/1108
[2] https://lkml.org/lkml/2021/7/14/736

This patch (of 2):

Let's produce a warning if we trying to remove non-existing IPC object
from IPC namespace kht/idr structures.

This allows us to catch possible bugs when the ipc_rmid() function was
called with inconsistent struct ipc_ids*, struct kern_ipc_perm*
arguments.

Link: https://lkml.kernel.org/r/20211027224348.611025-1-alexander.mikhalitsyn@virtuozzo.com
Link: https://lkml.kernel.org/r/20211027224348.611025-2-alexander.mikhalitsyn@virtuozzo.com
Co-developed-by: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: Alexander Mikhalitsyn <alexander.mikhalitsyn@virtuozzo.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Greg KH <gregkh@linuxfoundation.org>
Cc: Andrei Vagin <avagin@gmail.com>
Cc: Pavel Tikhomirov <ptikhomirov@virtuozzo.com>
Cc: Vasily Averin <vvs@virtuozzo.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/swap.c:put_pages_list(): reinitialise the page list

While free_unref_page_list() puts pages onto the CPU local LRU list, it
does not remove them from the list they were passed in on. That makes
the list_head appear to be non-empty, and would lead to various
corruption problems if we didn't have an assertion that the list was
empty.

Reinitialise the list after calling free_unref_page_list() to avoid this
problem.

Link: https://lkml.kernel.org/r/YYp40A2lNrxaZji8@casper.infradead.org
Fixes: 988c69f1bc23 ("mm: optimise put_pages_list()")
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Steve French <stfrench@microsoft.com>
Reported-by: Namjae Jeon <linkinjeon@kernel.org>
Tested-by: Steve French <stfrench@microsoft.com>
Tested-by: Namjae Jeon <linkinjeon@kernel.org>
Cc: Steve French <smfrench@gmail.com>
Cc: Hyeoncheol Lee <hyc.lee@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'intel-pinctrl-v5.17-2' of gitolite.pub/scm/linux/kernel/git/pinctrl/intel into devel

intel-pinctrl for v5.17-2

* Introduce new generic kasprintf_strarray() API
* Clean up and convert existing drivers to use the above

The API will be needed in the future for new comers, including Intel ones.

The following is an automated git shortlog grouped by driver:

armada-37xx:
-  Switch to use devm_kasprintf_strarray()
-  Convert to use dev_err_probe()
-  Make use of the devm_platform_ioremap_resource()
-  Use temporary variable for struct device
-  Fix function name in the kernel doc

gpio:
-  mockup: Switch to use kasprintf_strarray()

lib/string_helpers:
-  Introduce managed variant of kasprintf_strarray()
-  Introduce kasprintf_strarray()

pinctrl/rockchip:
-  Switch to use devm_kasprintf_strarray()
-  Convert to use dev_err_probe()
-  Make use of the devm_platform_get_and_ioremap_resource()
-  Use temporary variable for struct device
-  Drop wrong kernel doc annotation

st:
-  Switch to use devm_kasprintf_strarray()
-  Convert to use dev_err_probe()
-  Make use of the devm_platform_ioremap_resource_byname()
-  Use temporary variable for struct device
-  Drop wrong kernel doc annotations

zynqmp:
-  Unify pin naming

Merge tag 'libata-5.16-rc2' of git://git./linux/kernel/git/dlemoal/libata

Pull libata fixes from Damien Le Moal:

- Prevent accesses to unsupported log pages as that causes device scan
   failures with LLDDs using libsas (from me).

- A couple of fixes for AMD AHCI adapters handling of low power modes
   and resume (from Mario).

- Fix a compilation warning (from me).

* tag 'libata-5.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
  ata: libata-sata: Declare ata_ncq_sdev_attrs static
  ata: libahci: Adjust behavior when StorageD3Enable _DSD is set
  ata: ahci: Add Green Sardine vendor ID as board_ahci_mobile
  ata: libata: add missing ata_identify_page_supported() calls
  ata: libata: improve ata_read_log_page() error message

Merge tag 'trace-v5.16-6' of git://git./linux/kernel/git/rostedt/linux-trace

Pull tracing fixes from Steven Rostedt:

- Fix double free in destroy_hist_field

- Harden memset() of trace_iterator structure

- Do not warn in trace printk check when test buffer fills up

* tag 'trace-v5.16-6' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  tracing: Don't use out-of-sync va_list in event printing
  tracing: Use memset_startat() to zero struct trace_iterator
  tracing/histogram: Fix UAF in destroy_hist_field()

Merge tag 'perf-tools-fixes-for-v5.16-2021-11-19' of git://git./linux/kernel/git/acme/linux

Pull perf tools fixes from Arnaldo Carvalho de Melo:

- Fix the 'local_weight', 'weight' (memory access latency),
   'local_ins_lat', 'ins_lat' (instruction latency) and 'pstage_cyc'
   (pipeline stage cycles) sort key sample aggregation.

- Fix 'perf test' entry for watchpoints on s/390.

- Fix branch_stack entry endianness check in the 'perf test' sample
   parsing test.

- Fix ARM SPE handling on 'perf inject'.

- Fix memory leaks detected with ASan.

- Fix build on arm64 related to reallocarray() availability.

- Sync copies of kernel headers: cpufeatures, kvm, MIPS syscalltable
   (futex_waitv).

* tag 'perf-tools-fixes-for-v5.16-2021-11-19' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
  perf evsel: Fix memory leaks relating to unit
  perf report: Fix memory leaks around perf_tip()
  perf hist: Fix memory leak of a perf_hpp_fmt
  tools headers UAPI: Sync MIPS syscall table file changed by new futex_waitv syscall
  tools build: Fix removal of feature-sync-compare-and-swap feature detection
  perf inject: Fix ARM SPE handling
  perf bench: Fix two memory leaks detected with ASan
  perf test sample-parsing: Fix branch_stack entry endianness check
  tools headers UAPI: Sync x86's asm/kvm.h with the kernel sources
  perf sort: Fix the 'p_stage_cyc' sort key behavior
  perf sort: Fix the 'ins_lat' sort key behavior
  perf sort: Fix the 'weight' sort key behavior
  perf tools: Set COMPAT_NEED_REALLOCARRAY for CONFIG_AUXTRACE=1
  perf tests wp: Remove unused functions on s390
  tools headers UAPI: Sync linux/kvm.h with the kernel sources
  tools headers cpufeatures: Sync with the kernel sources

Merge tag 'riscv-for-linus-5.16-rc2' of git://git./linux/kernel/git/riscv/linux

Pull RISC-V fixes from Palmer Dabbelt:
"I have two patches for 5.16:

   - allow external modules to be built against read-only source trees

   - turn KVM on in the defconfigs

  The second one isn't technically a fix, but it got tied up pending
  some defconfig cleanups that ended up finding some larger issues. I
  figured it'd be better to get the config changes some more testing,
  but didn't want to hold up turning KVM on for that"

* tag 'riscv-for-linus-5.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  riscv: fix building external modules
  RISC-V: Enable KVM in RV64 and RV32 defconfigs as a module

Merge branch 'SA_IMMUTABLE-fixes-for-v5.16-rc2' of git://git./linux/kernel/git/ebiederm/user-namespace

Pull exit-vs-signal handling fixes from Eric Biederman:
"This is a small set of changes where debuggers were no longer able to
  intercept synchronous SIGTRAP and SIGSEGV, introduced by the exit
  cleanups.

  This is essentially the change you suggested with all of i's dotted
  and the t's crossed so that ptrace can intercept all of the cases it
  has been able to intercept the past, and all of the cases that made it
  to exit without giving ptrace a chance still don't give ptrace a
  chance"

* 'SA_IMMUTABLE-fixes-for-v5.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
  signal: Replace force_fatal_sig with force_exit_sig when in doubt
  signal: Don't always set SA_IMMUTABLE for forced signals

Merge tag 'scsi-fixes' of git://git./linux/kernel/git/jejb/scsi

Pull SCSI fixes from James Bottomley:
"Six fixes, five in drivers (ufs, qla2xxx, iscsi) and one core change
  to fix a regression in user space device state setting, which is used
  by the iscsi daemons to effect device recovery"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: qla2xxx: Fix mailbox direction flags in qla2xxx_get_adapter_id()
  scsi: ufs: core: Fix another task management completion race
  scsi: ufs: core: Fix task management completion timeout race
  scsi: core: sysfs: Fix hang when device state is set via sysfs
  scsi: iscsi: Unblock session then wake up error handler
  scsi: ufs: core: Improve SCSI abort handling

Merge tag 'for-linus' of git://git./linux/kernel/git/rdma/rdma

Pull rdma fixes from Jason Gunthorpe:
"There are a few big regression items from the merge window suggesting
  that people are testing rc1's but not testing the for-next branches:

   - Warnings fixes

   - Crash in hf1 when creating QPs and setting counters

   - Some old mlx4 cards fail to probe due to missing counters

   - Syzkaller crash in the new counters code"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
  MAINTAINERS: Update for VMware PVRDMA driver
  RDMA/nldev: Check stat attribute before accessing it
  RDMA/mlx4: Do not fail the registration on port stats
  IB/hfi1: Properly allocate rdma counter desc memory
  RDMA/core: Set send and receive CQ before forwarding to the driver
  RDMA/netlink: Add __maybe_unused to static inline in C file

Merge tag 'gpio-fixes-for-v5.16-rc2' of git://git./linux/kernel/git/brgl/linux

Pull gpio fixes from Bartosz Golaszewski:

- fix a coccicheck warning in gpio-virtio

- fix gpio selftests build issues

- fix a Kconfig issue in gpio-rockchip

* tag 'gpio-fixes-for-v5.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
  gpio: rockchip: needs GENERIC_IRQ_CHIP to fix build errors
  selftests: gpio: restore CFLAGS options
  selftests: gpio: fix uninitialised variable warning
  selftests: gpio: fix gpio compiling error
  gpio: virtio: remove unneeded semicolon

Merge tag 'drm-fixes-2021-11-19' of git://anongit.freedesktop.org/drm/drm

Pull drm fixes from Dave Airlie:
"This week's fixes, pretty quiet, about right for rc2. amdgpu is the
  bulk of them but the scheduler ones have been reported in a few places
  I think.

  Otherwise just some minor i915 fixes and a few other scattered around:

  scheduler:
   - two refcounting fixes

  cma-helper:
   - use correct free path for noncoherent

  efifb:
   - probing fix

  amdgpu:
   - Better debugging info for SMU msgs
   - Better error reporting when adding IP blocks
   - Fix UVD powergating regression on CZ
   - Clock reporting fix for navi1x
   - OLED panel backlight fix
   - Fix scaling on VGA/DVI for non-DC display code
   - Fix GLFCLK handling for RGP on some APUs
   - fix potential memory leak

  amdkfd:
   - GPU reset fix

  i915:
   - return error handling fix
   - ADL-P display fix
   - TGL DSI display clocks fix

  nouveau:
   - infoframe corruption fix

  sun4i:
   - Kconfig fix"

* tag 'drm-fixes-2021-11-19' of git://anongit.freedesktop.org/drm/drm:
  drm/amd/amdgpu: fix potential memleak
  drm/amd/amdkfd: Fix kernel panic when reset failed and been triggered again
  drm/amd/pm: add GFXCLK/SCLK clocks level print support for APUs
  drm/amdgpu: fix set scaling mode Full/Full aspect/Center not works on vga and dvi connectors
  drm/amd/display: Fix OLED brightness control on eDP
  drm/amd/pm: Remove artificial freq level on Navi1x
  drm/amd/pm: avoid duplicate powergate/ungate setting
  drm/amdgpu: add error print when failing to add IP block(v2)
  drm/amd/pm: Enhanced reporting also for a stuck command
  drm/i915/guc: fix NULL vs IS_ERR() checking
  drm/i915/dsi/xelpd: Fix the bit mask for wakeup GB
  Revert "drm/i915/tgl/dsi: Gate the ddi clocks after pll mapping"
  fbdev: Prevent probing generic drivers if a FB is already registered
  drm/scheduler: fix drm_sched_job_add_implicit_dependencies harder
  drm/scheduler: fix drm_sched_job_add_implicit_dependencies
  drm/sun4i: fix unmet dependency on RESET_CONTROLLER for PHY_SUN6I_MIPI_DPHY
  drm/cma-helper: Release non-coherent memory with dma_free_noncoherent()
  drm/nouveau: hdmigv100.c: fix corrupted HDMI Vendor InfoFrame

x86: Pin task-stack in __get_wchan()

When commit 5d1ceb3969b6 ("x86: Fix __get_wchan() for !STACKTRACE")
moved from stacktrace to native unwind_*() usage, the
try_get_task_stack() got lost, leading to use-after-free issues for
dying tasks.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Fixes: 5d1ceb3969b6 ("x86: Fix __get_wchan() for !STACKTRACE")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215031
Link: https://lore.kernel.org/stable/YZV02RCRVHIa144u@fedora64.linuxtx.org/
Reported-by: Justin Forbes <jmforbes@linuxtx.org>
Reported-by: Holger Hoffstätte <holger@applied-asynchrony.com>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

signal: Replace force_fatal_sig with force_exit_sig when in doubt

Recently to prevent issues with SECCOMP_RET_KILL and similar signals
being changed before they are delivered SA_IMMUTABLE was added.

Unfortunately this broke debuggers[1][2] which reasonably expect
to be able to trap synchronous SIGTRAP and SIGSEGV even when
the target process is not configured to handle those signals.

Add force_exit_sig and use it instead of force_fatal_sig where
historically the code has directly called do_exit. This has the
implementation benefits of going through the signal exit path
(including generating core dumps) without the danger of allowing
userspace to ignore or change these signals.

This avoids userspace regressions as older kernels exited with do_exit
which debuggers also can not intercept.

In the future is should be possible to improve the quality of
implementation of the kernel by changing some of these force_exit_sig
calls to force_fatal_sig. That can be done where it matters on
a case-by-case basis with careful analysis.

Reported-by: Kyle Huey <me@kylehuey.com>
Reported-by: kernel test robot <oliver.sang@intel.com>
[1] https://lkml.kernel.org/r/CAP045AoMY4xf8aC_4QU_-j7obuEPYgTcnQQP3Yxk=2X90jtpjw@mail.gmail.com
[2] https://lkml.kernel.org/r/20211117150258.GB5403@xsang-OptiPlex-9020
Fixes: 00b06da29cf9 ("signal: Add SA_IMMUTABLE to ensure forced siganls do not get changed")
Fixes: a3616a3c0272 ("signal/m68k: Use force_sigsegv(SIGSEGV) in fpsp040_die")
Fixes: 83a1f27ad773 ("signal/powerpc: On swapcontext failure force SIGSEGV")
Fixes: 9bc508cf0791 ("signal/s390: Use force_sigsegv in default_trap_handler")
Fixes: 086ec444f866 ("signal/sparc32: In setup_rt_frame and setup_fram use force_fatal_sig")
Fixes: c317d306d550 ("signal/sparc32: Exit with a fatal signal when try_to_clear_window_buffer fails")
Fixes: 695dd0d634df ("signal/x86: In emulate_vsyscall force a signal instead of calling do_exit")
Fixes: 1fbd60df8a85 ("signal/vm86_32: Properly send SIGSEGV when the vm86 state cannot be saved.")
Fixes: 941edc5bf174 ("exit/syscall_user_dispatch: Send ordinary signals on failure")
Link: https://lkml.kernel.org/r/871r3dqfv8.fsf_-_@email.froward.int.ebiederm.org
Reviewed-by: Kees Cook <keescook@chromium.org>
Tested-by: Kees Cook <keescook@chromium.org>
Tested-by: Kyle Huey <khuey@kylehuey.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>

signal: Don't always set SA_IMMUTABLE for forced signals

Recently to prevent issues with SECCOMP_RET_KILL and similar signals
being changed before they are delivered SA_IMMUTABLE was added.

Unfortunately this broke debuggers[1][2] which reasonably expect to be
able to trap synchronous SIGTRAP and SIGSEGV even when the target
process is not configured to handle those signals.

Update force_sig_to_task to support both the case when we can allow
the debugger to intercept and possibly ignore the signal and the case
when it is not safe to let userspace know about the signal until the
process has exited.

Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Reported-by: Kyle Huey <me@kylehuey.com>
Reported-by: kernel test robot <oliver.sang@intel.com>
Cc: stable@vger.kernel.org
[1] https://lkml.kernel.org/r/CAP045AoMY4xf8aC_4QU_-j7obuEPYgTcnQQP3Yxk=2X90jtpjw@mail.gmail.com
[2] https://lkml.kernel.org/r/20211117150258.GB5403@xsang-OptiPlex-9020
Fixes: 00b06da29cf9 ("signal: Add SA_IMMUTABLE to ensure forced siganls do not get changed")
Link: https://lkml.kernel.org/r/877dd5qfw5.fsf_-_@email.froward.int.ebiederm.org
Reviewed-by: Kees Cook <keescook@chromium.org>
Tested-by: Kees Cook <keescook@chromium.org>
Tested-by: Kyle Huey <khuey@kylehuey.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>

MAINTAINERS: Update for VMware PVRDMA driver

Update maintainer info for the VMware PVRDMA driver.

Link: https://lore.kernel.org/r/1637320770-44878-1-git-send-email-bryantan@vmware.com
Reviewed-by: Adit Ranadive <aditr@vmware.com>
Reviewed-by: Vishnu Dasa <vdasa@vmware.com>
Signed-off-by: Bryan Tan <bryantan@vmware.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

blk-mq: don't insert FUA request with data into scheduler queue

We never insert flush request into scheduler queue before.

Recently commit d92ca9d8348f ("blk-mq: don't handle non-flush requests in
blk_insert_flush") tries to handle FUA data request as normal request.
This way has caused warning[1] in mq-deadline dd_exit_sched() or io hang in
case of kyber since RQF_ELVPRIV isn't set for flush request, then
->finish_request won't be called.

Fix the issue by inserting FUA data request with blk_mq_request_bypass_insert()
when the device supports FUA, just like what we did before.

[1] https://lore.kernel.org/linux-block/CAHj4cs-_vkTW=dAzbZYGxpEWSpzpcmaNeY1R=vH311+9vMUSdg@mail.gmail.com/

Reported-by: Yi Zhang <yi.zhang@redhat.com>
Fixes: d92ca9d8348f ("blk-mq: don't handle non-flush requests in blk_insert_flush")
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20211118153041.2163228-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

blk-cgroup: fix missing put device in error path from blkg_conf_pref()

If blk_queue_enter() failed due to queue is dying, the
blkdev_put_no_open() is needed because blkcg_conf_open_bdev() succeeded.

Fixes: 0c9d338c8443 ("blk-cgroup: synchronize blkg creation against policy deactivation")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20211102020705.2321858-1-yukuai3@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

pinctrl: renesas: Remove unneeded locking around sh_pfc_read() calls

There is no need to acquire the spinlock when reading from a pin
controller register:
  1. Reading a single MMIO register is an atomic operation,
  2. While sh_pfc_phys_to_virt() inside sh_pfc_read() has to traverse
     all mapped windows to find the appropriate virtual address, this
     does not need any locking, as the window mappings are never
     changed.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/2008ca99f0079fd5d4e640b7ef78710c98cc9f77.1637143108.git.geert+renesas@glider.be

gpio: mockup: Switch to use kasprintf_strarray()

Since we have a generic helper, switch the module to use it.
No functional change intended.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Bartosz Golaszewski <brgl@bgdev.pl>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: zynqmp: Unify pin naming

Since we have devm_kasprintf_strarray() helper, which is used in
the rest of pin control drivers, it makes sense to switch this
driver to it. The pin names are not part of any ABI and hence
there will be no regression based on that. Otherwise all generated
pin names will follow the same schema in the pin control subsystem.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>