Kalle Valo [Fri, 11 Jun 2010 13:29:59 +0000 (16:29 +0300)]
Send signal when service name changes
Needed for operator name changes in ofono.
Samuel Ortiz [Mon, 14 Jun 2010 20:09:42 +0000 (22:09 +0200)]
Use dedicated code path for fixed IP settings
Marcel Holtmann [Sat, 12 Jun 2010 12:57:30 +0000 (14:57 +0200)]
Fix invalid D-Bus path with finished scans without hidden SSIDs
Samuel Ortiz [Fri, 11 Jun 2010 23:13:21 +0000 (01:13 +0200)]
Enable hidden blocks only when hidden SSIDs are around
Samuel Ortiz [Fri, 11 Jun 2010 22:06:37 +0000 (00:06 +0200)]
Prevent wpa_supplicant from automatically associating to our hidden blocks
wpa_supplicant will never match a network block with an invalid BSSID
and an actual scan results, and thus will not select the latter for
association.
Samuel Ortiz [Fri, 11 Jun 2010 13:32:17 +0000 (15:32 +0200)]
Remove IPv4 element registration from the oFono plugin
This is no longer needed with the manual setting path adding the nameserver
as well.
Samuel Ortiz [Fri, 11 Jun 2010 13:24:10 +0000 (15:24 +0200)]
Add nameserver settings to the manual configuration setting
This is needed for ofono when the modem sends fixed IP settings, along
with namesevers.
Kalle Valo [Fri, 11 Jun 2010 06:12:06 +0000 (09:12 +0300)]
ofono: do not use context path as network group identifier
The ofono plugin was using context path as network group identifier
which caused service path to end something like this:
/profile/default/cellular_244053111242822_huawei2_primarycontext1
But the problem here is that with certain modems (like my Huawei E1552)
the path will change every time the modem in replugged. This meant
that a new connman service was created everytime and I had to
enter APN everytime, instead of using the stored service which already
had APN correctly set.
Fix this by using only the last part from path, for example in this
case primarycontext1:
/profile/default/cellular_244053111242822_primarycontext1
Now with huawei modems the service id stays always the same as it should.
Marcel Holtmann [Thu, 10 Jun 2010 23:57:22 +0000 (16:57 -0700)]
Return an error for invalid transaction on immutable services
Marcel Holtmann [Thu, 10 Jun 2010 23:24:26 +0000 (16:24 -0700)]
Only scan for hidden SSIDs from your favorites
Marcel Holtmann [Thu, 10 Jun 2010 14:46:26 +0000 (07:46 -0700)]
Fix potential uninitilized variable usage
Marcel Holtmann [Thu, 10 Jun 2010 14:42:53 +0000 (07:42 -0700)]
Prefer to use err instead of ret for variable names
Samuel Ortiz [Tue, 8 Jun 2010 19:43:58 +0000 (21:43 +0200)]
Set default gateway when route deletion fails
When del_routes fails, no gateway deletion event is sent and thus the
connection layer doesn't set a proper default gateway.
Samuel Ortiz [Mon, 7 Jun 2010 17:00:04 +0000 (19:00 +0200)]
Add some more portal plugin debug strings
Samuel Ortiz [Mon, 7 Jun 2010 15:03:13 +0000 (17:03 +0200)]
Update the configuration file documentation
The configuration file names should be *.config.
Samuel Ortiz [Thu, 3 Jun 2010 22:46:42 +0000 (00:46 +0200)]
Active scan hidden networks
A network block is added for all known SSIDs from the active profile. Then
those blocks are enabled one by one so that they're actively scanned. The
blocks are removed whenever their SSID appear in the scan results.
Samuel Ortiz [Thu, 3 Jun 2010 17:55:23 +0000 (19:55 +0200)]
wifi routine to fetch the saved SSIDs from the active profile
Kalle Valo [Fri, 4 Jun 2010 10:54:12 +0000 (13:54 +0300)]
Fix make clean
Running make clean twice in a row fails with error:
make: *** No rule to make target `include/connman', needed by `clean-local'.
Stop.
Fix it by moving the target as an argument for rm.
Marcel Holtmann [Thu, 3 Jun 2010 08:41:39 +0000 (01:41 -0700)]
Add support for ASCII based WEP keys
Marcel Holtmann [Thu, 3 Jun 2010 06:53:02 +0000 (23:53 -0700)]
Mention the IPv4.Method = fixed setting
Samuel Ortiz [Tue, 1 Jun 2010 00:16:35 +0000 (02:16 +0200)]
Remove default ntpd server
Default ntpd servers should be defined by plugins. Now the MeeGo one
sets a default server instead of hardcoding it from the ntpd plugin.
Samuel Ortiz [Mon, 31 May 2010 23:58:17 +0000 (01:58 +0200)]
Fix timeserver API
We want to keep the server pointer constant.
Samuel Ortiz [Mon, 31 May 2010 13:09:28 +0000 (15:09 +0200)]
ntpd plugin
The ntpd plugin triggers an ntpd -q task whenever a service goes online.
It either uses the meego ntp service or the one it potentially fetches
from a DHCP response.
Samuel Ortiz [Mon, 31 May 2010 13:05:58 +0000 (15:05 +0200)]
Complete timeserver API
The timeserver API now includes a sync() call in order to separate
timeserver peer addition from actual time syncing.
Marcel Holtmann [Fri, 28 May 2010 08:29:38 +0000 (10:29 +0200)]
Don't filter out interfaces within IP configuration
Marcel Holtmann [Tue, 25 May 2010 12:04:58 +0000 (14:04 +0200)]
Release 0.53
Marcel Holtmann [Tue, 25 May 2010 10:32:21 +0000 (12:32 +0200)]
Remove implemented items from the TODO list
Marcel Holtmann [Tue, 25 May 2010 09:06:03 +0000 (11:06 +0200)]
Break function declaration down to two lines
Gustavo F. Padovan [Tue, 25 May 2010 08:12:39 +0000 (05:12 -0300)]
Bring back -d option without need for argument
Daniel Wagner [Sat, 22 May 2010 17:57:22 +0000 (19:57 +0200)]
Add configuration file option for passphrase
Daniel Wagner [Thu, 20 May 2010 20:43:04 +0000 (22:43 +0200)]
Adapt to new MCC and MNC properties from oFono
Since oFono version 0.20 and later MobileNetworkCodeLength has been
deprecated. MobileCountryCode and MobileNetworkCode have to be used
instead.
Samuel Ortiz [Tue, 18 May 2010 21:37:42 +0000 (23:37 +0200)]
Use helper for checking rtnl message validity
Samuel Ortiz [Tue, 18 May 2010 21:13:36 +0000 (23:13 +0200)]
Fix set_property() indentation
Fix indentation errors introduced by the IPv4 setting code.
Samuel Ortiz [Tue, 18 May 2010 10:48:13 +0000 (12:48 +0200)]
Clear and set IPv4 settings when connected
If changed while connected, the IPv4 settings should be applied without
clients needing to go through a disconnect->connect cycle.
Samuel Ortiz [Tue, 18 May 2010 10:33:16 +0000 (12:33 +0200)]
network API for setting and clearing IPv4 settings on the fly
Samuel Ortiz [Tue, 18 May 2010 10:18:13 +0000 (12:18 +0200)]
Support RTPROT_KERNEL when adding/deleting routes
RTM_*ROUTE messages can come with an RTPROT_KERNEL protocol when setting
route after bringing the interface up.
Samuel Ortiz [Tue, 18 May 2010 10:13:51 +0000 (12:13 +0200)]
Unregister element's children by type
Add a new element API to be able to unregister an element's children
of a certain type.
Marcel Holtmann [Mon, 17 May 2010 07:26:17 +0000 (09:26 +0200)]
Fix memory leak with nameserver and domain configuration
Marcel Holtmann [Mon, 17 May 2010 07:17:38 +0000 (09:17 +0200)]
Add some extra comments for IPv4 and nameserver configuration
Marcel Holtmann [Sun, 16 May 2010 11:38:57 +0000 (13:38 +0200)]
Add example test tool for DNS resolver client
Samuel Ortiz [Fri, 14 May 2010 16:55:09 +0000 (18:55 +0200)]
Notify for technology disabling when removing a device
By not doing so the technology_enabled[] counter for the corresponding
service type is not decreased. Next time the device is plugged back any
client trying to switch the technology off will fail as the counter will
never go back to 0.
Marcel Holtmann [Fri, 14 May 2010 13:35:47 +0000 (15:35 +0200)]
Add some simple commands to cm utility
Marcel Holtmann [Thu, 13 May 2010 16:18:51 +0000 (18:18 +0200)]
Fix wrong return type of LookupService message
Marcel Holtmann [Thu, 13 May 2010 15:29:31 +0000 (17:29 +0200)]
Minor whitespace versus tab change
Marcel Holtmann [Thu, 13 May 2010 15:09:08 +0000 (17:09 +0200)]
Add method to retrieve sorted list of tuples for services
Marcel Holtmann [Thu, 13 May 2010 12:24:32 +0000 (14:24 +0200)]
Add initial support for LookupService helper method
Marcel Holtmann [Thu, 13 May 2010 11:59:11 +0000 (13:59 +0200)]
Internal functions should not have a __connman prefix
Marcel Holtmann [Thu, 13 May 2010 11:47:33 +0000 (13:47 +0200)]
Add error for not unique situations
Marcel Holtmann [Thu, 13 May 2010 11:10:02 +0000 (13:10 +0200)]
Fix massive amount of whitespace usage in configure.ac
Marcel Holtmann [Thu, 13 May 2010 11:08:32 +0000 (13:08 +0200)]
Check for dhclient hostname support
Marcel Holtmann [Thu, 13 May 2010 10:39:03 +0000 (12:39 +0200)]
Add support for setting per service domain list
Samuel Ortiz [Wed, 12 May 2010 22:28:05 +0000 (00:28 +0200)]
Portal check for Bluetooth, WiMAX and cellular networks
By not checking for a portal with those networks, they were left in a
connected state, never moving to online.
Samuel Ortiz [Wed, 12 May 2010 17:42:36 +0000 (19:42 +0200)]
Watch for Bluez network change signal
When a PANU server goes away, bluez sends a network change signal which
allows for a proper network disconnection. Without trapping this signal,
the PAN network state will stay in connected state.
Marcel Holtmann [Wed, 12 May 2010 18:13:31 +0000 (20:13 +0200)]
Add support for setting manual DNS server configuration
Marcel Holtmann [Wed, 12 May 2010 18:03:47 +0000 (20:03 +0200)]
Set system gateway correctly so it can be exported
Marcel Holtmann [Wed, 12 May 2010 17:16:37 +0000 (19:16 +0200)]
Add support for retrieving system hostname
Marcel Holtmann [Wed, 12 May 2010 17:15:13 +0000 (19:15 +0200)]
Send system hostname with dhclient execution
Marcel Holtmann [Wed, 12 May 2010 17:14:46 +0000 (19:14 +0200)]
Add support for getting current system hostname
Marcel Holtmann [Wed, 12 May 2010 16:37:03 +0000 (18:37 +0200)]
Export IPv4 gateway properly information if available
Marcel Holtmann [Wed, 12 May 2010 15:09:20 +0000 (17:09 +0200)]
Ignore invalid hostname provided by DHCP server
Forest Bond [Wed, 12 May 2010 00:56:06 +0000 (20:56 -0400)]
Fail immediately enabling/disabling unregistered technology
Previously, calling EnableTechnology or DisableTechnology with an
unregistered technology type caused the call to fail silently and
eventually timeout. With this patch, a "Not Registered" error is
returned immediately instead.
Martin Xu [Mon, 10 May 2010 07:25:36 +0000 (15:25 +0800)]
Check ssid_len before set WiFi.SSID of network
wpa_s 0.7.1 reports hidden network SSID as NULL, during scan. Conseqently,
the ssid of hidden network (which is set by user before) may be cleared,
and can not be connected anymore.
Marcel Holtmann [Sat, 8 May 2010 11:01:41 +0000 (13:01 +0200)]
Mention Forest's contributions
Marcel Holtmann [Sat, 8 May 2010 10:58:30 +0000 (12:58 +0200)]
Minor coding style update
Forest Bond [Thu, 6 May 2010 17:35:33 +0000 (13:35 -0400)]
Add support multiple nameservers in /etc/resolv.conf
Nameservers are appended to a local entry list. The MAXNS most recently
appended nameservers are written to /etc/resolv.conf in reverse order
(the most recently appended entry becomes the primary nameserver).
Martin Xu [Fri, 7 May 2010 08:39:48 +0000 (16:39 +0800)]
Export Gateway from service properties IPv4
Marcel Holtmann [Thu, 6 May 2010 05:49:25 +0000 (07:49 +0200)]
Update the Nameservers and Domains property description
Kalle Valo [Wed, 5 May 2010 14:02:50 +0000 (17:02 +0300)]
Remove set_powered() calls based on IFF_UP
wpa_supplicant 0.7.2+ (from git) didn't connect automatically to a wifi
network. I found out that this because of two calls to
connman_device_set_powered(), from wifi_newlink() and get_interface_reply().
The former was called first and causing the latter call not to trigger a
scan.
Because wpa_supplicant is initialised only in get_interface_reply(), and I
wasn't able to find a reason for the set_powered() call in wifi_newlink(),
the call in wifi_newlink() can be removed. Now connman will work with
both 0.6 and 0.7 versions of wpa_supplicant.
Also the supplicant_scan() is not needed, calling connman_device_set_powered()
in get_interface_reply() will trigger a scan.
Martin Xu [Wed, 5 May 2010 15:26:59 +0000 (23:26 +0800)]
Call __connman_notifier_connect() only when state is READY
If we call it at READY or ONLINE state, The function will be called
twice and connected times is set as two. And StateChanged signal "offline"
will never be emitted.
Commit
59a8daa3 ("ONLINE and LOGIN are also "connected" states.") added
a check for also state CONNMAN_SERVICE_STATE_LOGIN in
__connman_service_indicate_state(). But this meant that
__connman_notifier_connect() was called twice for each service, first in
READY state and then in LOGIN state. This broke refcounting in notifier.c
and caused a bug that Manager interface would always clame to be in
online state after a first successful connection even if all services were
disconnected.
Daniel Wagner [Thu, 29 Apr 2010 15:43:32 +0000 (17:43 +0200)]
Append Ethernet dictionary to cellular service properties
Martin Xu [Wed, 28 Apr 2010 10:25:45 +0000 (18:25 +0800)]
Set network associating to FALSE in pan_disconnect()
Otherwise, connman_network_set_connected() takes normal service
disconnect as connecting failure.
Martin Xu [Tue, 27 Apr 2010 09:49:12 +0000 (17:49 +0800)]
Check error before call dbus_message_get_args to acquire arguments
Function dbus_message_get_args just checks the signature which may
happens to be s(string), then it will just return TRUE, and the error
message is treated as return value.
So dbus_set_error_from_message is used to check the error, before
call dbus_message_get_args.
Mohamed Abbas [Tue, 20 Apr 2010 22:05:47 +0000 (15:05 -0700)]
Clean all VPN added host and gateway entries on VPN disconnect
When VPN disconnect we need to clean all gateway and host entries
correctly. VPN will add a gatway into active physical interface,
this entries need to be delete on VPN disconnect.
This patch fixes the issue of more than one defaut gateway showing up.
VPN gateway needs extra work to clean and set the gateway since it needs
a physical interface to set the host/gateway correctly.
Mohamed Abbas [Tue, 20 Apr 2010 22:05:46 +0000 (15:05 -0700)]
Fix issue with two default gateways when using VPN
This patch fixes the issue of more than one defaut gateway showing up.
This caused because VPN gatway was added but an active flag never
been set, which lead to two active gateway can be registered.
Forest Bond [Thu, 22 Apr 2010 19:56:12 +0000 (15:56 -0400)]
Split DHCP-provided nameserver string.
The DHCP-provided nameserver string is split up into separate nameservers.
Currently, only one nameserver can be stored in the connman_element.ipv4
structure, so all but the first of the DHCP-provided nameservers are thrown
out.
Johan Hedberg [Thu, 29 Apr 2010 22:23:45 +0000 (01:23 +0300)]
Fix parent path introspection data invalidation for multiple levels
In the case that parent path data needs to be invalidated we shouldn't
stop at the immediate parent if it doesn't have our own handler
registered but should continue upwards in the tree until we reach root
or our own handler.
Johan Hedberg [Thu, 29 Apr 2010 21:27:54 +0000 (00:27 +0300)]
Fix memory leak in g_dbus_register_interface
Daniel Wagner [Tue, 20 Apr 2010 14:30:17 +0000 (16:30 +0200)]
Fix typo: store password into service->password field
Marcel Holtmann [Sat, 17 Apr 2010 03:57:13 +0000 (20:57 -0700)]
Mention Daniel's contributions
Samuel Ortiz [Fri, 16 Apr 2010 09:52:09 +0000 (11:52 +0200)]
Remove supplicant and device scanning state cleaning
With wpa_supplicant 0.7, there is no need to handle potential issues with scan
results not being sent. Also, the state change is sent before the actual scan
results, so marking all networks available at that point is misleading.
Daniel Wagner [Wed, 14 Apr 2010 14:03:46 +0000 (16:03 +0200)]
ofono API refactoring: Rename netreg Operator property to Name
for ofono version >0.20
Martin Xu [Wed, 14 Apr 2010 05:02:32 +0000 (13:02 +0800)]
Remove the access of status property of DataConnectionManager from oFono
The status property has been removed from oFono post oFono 0.20
Marcel Holtmann [Tue, 13 Apr 2010 15:47:37 +0000 (08:47 -0700)]
Release 0.52
Samuel Ortiz [Tue, 13 Apr 2010 14:31:12 +0000 (16:31 +0200)]
Fix session code identation
Samuel Ortiz [Tue, 13 Apr 2010 14:30:26 +0000 (16:30 +0200)]
Fix session API documentation
We return an object path, not a simple string.
Martin Xu [Mon, 12 Apr 2010 06:35:06 +0000 (14:35 +0800)]
Remove erroneous DHCP method setting from bluetooth plugin
The ipconfig method is set by connman_network_set_index(), DHCP being the
default one.
Martin Xu [Tue, 13 Apr 2010 13:14:08 +0000 (15:14 +0200)]
Load ipconfig setting from __connman_service_create_ipconfig()
When creating a service without an ipconfig, the ipconfig settings are not
loaded. This issue is fixed by calling __connman_ipconfig_load() indirectly
from connman_network_set_index().
Martin Xu [Tue, 13 Apr 2010 11:28:52 +0000 (13:28 +0200)]
Reset ipconfig index
With PAN, the bnep device index might change and thus it needs to be set
appropriately whenever connman_network_set_index() gets called.
Martin Xu [Mon, 12 Apr 2010 06:35:03 +0000 (14:35 +0800)]
Add __connman_ipconfig_set_index() helper
Martin Xu [Fri, 9 Apr 2010 08:06:47 +0000 (16:06 +0800)]
Reference PAN network before disconnecting
The PAN network can be destructed before getting the disconnect reply. In
that case disconnect_reply() will segfault by calling
connman_network_set_connected() with a NULL network pointer.
This issue is fixed by referencing the PAN network from pan_disconnect().
Samuel Ortiz [Thu, 8 Apr 2010 22:19:07 +0000 (00:19 +0200)]
Reset connman_network device pointer when it is no longer referenced
When removing all networks from a device, network->device pointers are
set to NULL even though the network is still referenced. This can lead
to segmentation faults when for example a service has several networks
and is being disconnected.
Samuel Ortiz [Tue, 6 Apr 2010 21:39:57 +0000 (23:39 +0200)]
Do not set network index from PAN disconnect reply
There is no need to track the network's connected state through its index.
As a matter of fact, setting the network index to -1 on the PAN disconnect
path can triggers segmentation faults when powering the device off at the
same time.
Samuel Ortiz [Thu, 1 Apr 2010 10:25:33 +0000 (12:25 +0200)]
Add session D-Bus manager API
Samuel Ortiz [Thu, 1 Apr 2010 10:17:36 +0000 (12:17 +0200)]
Add session support
The session layer allows 3rd party applications to request a network
session from connman. The only thing applications need to specify is
the type of network they're looking for, a.k.a. the network bearer. An
unspecified bearer means picking the best available service.
Samuel Ortiz [Thu, 1 Apr 2010 10:15:54 +0000 (12:15 +0200)]
Connect service based on service type
__connman_service_connect_type() tries to find the appropriate service
based on the service_type argument, and connect it. If the argument is
CONNMAN_SERVICE_TYPE_UNKNOWN, the first available service is picked.
Gustavo Sverzut Barbieri [Fri, 2 Apr 2010 18:56:38 +0000 (20:56 +0200)]
ONLINE and LOGIN are also "connected" states.
Code was initially done with CONNMAN_SERVICE_STATE_READY being the
only valid connected state, but later on CONNMAN_SERVICE_STATE_LOGIN
and CONNMAN_SERVICE_STATE_ONLINE were introduced, breaking couple of
functions that assumed the old behavior.
This patch creates the is_connected() function, similar to
is_connecting() and uses it instead.
__connman_service_indicate_state() checks just for ONLINE, as
requested by Marcel.
Mohamed Abbas [Thu, 1 Apr 2010 21:13:18 +0000 (23:13 +0200)]
Add hh2serial GPS support
This patch brings the hh2serial GPS device on and off with offline mode
changes. Although this power control is currently done through sysfs
entries, this will be fixed once the hh2serial driver gets proper
rfkill support.
Samuel Ortiz [Fri, 26 Mar 2010 19:44:58 +0000 (20:44 +0100)]
Use psk for building hidden WPA SSID group
When building a hidden SSID group for a WPA/WPA2 network, use psk as the
security string. With rsn or wpa strings, 2 services for the same SSID will
show up once the SSID appears in any scan result.
Marcel Holtmann [Thu, 25 Mar 2010 23:37:09 +0000 (16:37 -0700)]
Release 0.51
Samuel Ortiz [Thu, 25 Mar 2010 15:02:23 +0000 (16:02 +0100)]
Reset location->result when disconnecting.
If result is not reset, the service state is no longer indicated after a
connect/disconnect cycle.