Libo Chen [Mon, 27 May 2013 01:31:49 +0000 (22:31 -0300)]
[media] drivers/media/pci/dm1105/dm1105: Convert to module_pci_driver
use module_pci_driver instead of init/exit, make code clean.
Signed-off-by: Libo Chen <libo.chen@huawei.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Libo Chen [Mon, 27 May 2013 01:31:46 +0000 (22:31 -0300)]
[media] drivers/media/pci/mantis/hopper_cards: Convert to module_pci_driver
use module_pci_driver instead of init/exit, make code clean.
Signed-off-by: Libo Chen <libo.chen@huawei.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Libo Chen [Mon, 27 May 2013 01:31:43 +0000 (22:31 -0300)]
[media] drivers/media/pci/dm1105/dm1105: Convert to module_pci_driver
use module_pci_driver instead of init/exit, make code clean.
Signed-off-by: Libo Chen <libo.chen@huawei.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Libo Chen [Mon, 27 May 2013 01:31:56 +0000 (22:31 -0300)]
[media] drivers/media/pci/pt1/pt1: Convert to module_pci_driver
use module_pci_driver instead of init/exit, make code clean.
Signed-off-by: Libo Chen <libo.chen@huawei.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Wed, 22 May 2013 14:25:52 +0000 (11:25 -0300)]
Properly handle tristate dependencies on USB/PCI menus
As USB/PCI/MEDIA_SUPPORT dependencies can be tristate, we can't
simply make the bool menu to be dependent on it. Everything below
the menu should also depend on it, otherwise, we risk to allow
building them with 'y', while only 'm' would be supported.
So, add an IF just before everything below, in order to avoid
such risks.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Laurent Pinchart [Sat, 8 Jun 2013 07:50:42 +0000 (04:50 -0300)]
[media] mt9p031: Use bulk regulator API
The sensor is powered by three supplies. Use the bulk regulator API to
enable and disable them instead of performing the operations manually.
This fixes a warning caused by ignoring the return value of
regulator_enable().
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Lad, Prabhakar [Sun, 26 May 2013 13:08:54 +0000 (10:08 -0300)]
[media] media: i2c: mt9p031: add OF support
Add OF support for the mt9p031 sensor driver.
Alongside this patch sorts the header inclusion alphabetically.
Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Mon, 10 Jun 2013 09:57:19 +0000 (06:57 -0300)]
[media] ths8200: fix two compiler warnings
drivers/media/i2c/ths8200.c: In function ‘ths8200_g_register’:
drivers/media/i2c/ths8200.c:121:21: warning: unused variable ‘client’ [-Wunused-variable]
drivers/media/i2c/ths8200.c: In function ‘ths8200_s_register’:
drivers/media/i2c/ths8200.c:132:21: warning: unused variable ‘client’ [-Wunused-variable]
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Cc: Prabhakar Lad <prabhakar.csengg@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Sat, 1 Jun 2013 13:02:38 +0000 (10:02 -0300)]
[media] saa7134: fix empress format compliance bugs
Fix uninitialized fields and a missing TRY_FMT implementation in saa6752hs.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Fri, 31 May 2013 14:48:50 +0000 (11:48 -0300)]
[media] saa7134: fix format-related compliance issues
- map overlay format values to the supported ranges
- set colorspace
- zero priv field
- fix cliplist handling
- fix field handling
- initialize ovbuf values
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Fri, 31 May 2013 11:44:58 +0000 (08:44 -0300)]
[media] saa7134: move qos_request from saa7134_fh to saa7134_dev
This is a global field, not a per-filehandle field.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Fri, 31 May 2013 11:30:49 +0000 (08:30 -0300)]
[media] saa7134: move fmt/width/height from saa7134_fh to saa7134_dev
These fields are global, not per-filehandle.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Fri, 31 May 2013 11:22:24 +0000 (08:22 -0300)]
[media] saa7134: move the overlay fields from saa7134_fh to saa7134_dev
This is global data, not per-filehandle data.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Fri, 31 May 2013 10:57:10 +0000 (07:57 -0300)]
[media] saa7134: remove radio/type field from saa7134_fh
This information is already available in vfl_type in video_device.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Ismael Luceno [Thu, 6 Jun 2013 03:12:17 +0000 (00:12 -0300)]
[media] solo6x10: reimplement SAA712x setup routine
This cleans up the saa712x setup code and there are no functional changes.
Signed-off-by: Ismael Luceno <ismael.luceno@corp.bluecherry.net>
[hans.verkuil@cisco.com: add clarification that this is cleanup only]
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Mon, 3 Jun 2013 16:26:17 +0000 (13:26 -0300)]
[media] media: i2c: ths8200: driver for TI video encoder
The full datasheets are available from TI website:-
http://www.ti.com/product/ths8200
Note: This patch adds support only for progressive format
as of now.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mats Randgaard <mats.randgaard@cisco.com>
Signed-off-by: Martin Bugge <martin.bugge@cisco.com>
Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Wed, 29 May 2013 13:19:06 +0000 (10:19 -0300)]
[media] tvp5150: fix s_std support
- do exact matching for special formats like PAL-M
- drop autodetect support: it's non-standard, and it is bogus as well since there
is no way to get back the detected standard since neither g_std nor querystd are
implemented.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Wed, 29 May 2013 13:19:05 +0000 (10:19 -0300)]
[media] DocBook/media/v4l: clarify the QUERYSTD documentation
Explicitly mention that this ioctl should return V4L2_STD_UNKNOWN if
not signal was detected.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Wed, 29 May 2013 13:19:04 +0000 (10:19 -0300)]
[media] v4l2-ioctl: clarify querystd comment
Improve the querystd comment.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Wed, 29 May 2013 13:19:03 +0000 (10:19 -0300)]
[media] zoran: remove bogus autodetect mode in set_norm
Currently, if the norm set is V4L2_STD_ALL, then autodetect the current
standard and use that. This is non-standard behavior, and in fact it hasn't
worked for a very long time: before s_std is called in this driver, the
v4l2 core will mask it with the tvnorms field. So even if the application
passes V4L2_STD_ALL, the zoran driver will always see a subset of that.
Since nobody ever complained about this we just remove this non-standard
functionality.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Wed, 29 May 2013 13:19:02 +0000 (10:19 -0300)]
[media] bttv: fix querystd
AND the standard mask with the detected standards.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Wed, 29 May 2013 13:19:01 +0000 (10:19 -0300)]
[media] vpx3220: fix querystd
Return V4L2_STD_UNKNOWN if no signal is detected.
Otherwise AND the standard mask with the detected standards.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Wed, 29 May 2013 13:19:00 +0000 (10:19 -0300)]
[media] tvp514x: fix querystd
Return V4L2_STD_UNKNOWN if no signal is detected.
Otherwise AND the standard mask with the detected standards.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Wed, 29 May 2013 13:18:59 +0000 (10:18 -0300)]
[media] saa7191: fix querystd
Return V4L2_STD_UNKNOWN if no signal is detected.
Otherwise AND the standard mask with the detected standards.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Wed, 29 May 2013 13:18:58 +0000 (10:18 -0300)]
[media] saa7115: fix querystd
Return V4L2_STD_UNKNOWN if no signal is detected.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Wed, 29 May 2013 13:18:57 +0000 (10:18 -0300)]
[media] saa7110: fix querystd
Return V4L2_STD_UNKNOWN if no signal is detected.
Otherwise AND the standard mask with the detected standards.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Wed, 29 May 2013 13:18:56 +0000 (10:18 -0300)]
[media] ks0127: fix querystd
Return V4L2_STD_UNKNOWN if no signal is detected.
Otherwise AND the standard mask with the detected standards.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Wed, 29 May 2013 13:18:55 +0000 (10:18 -0300)]
[media] bt819: fix querystd
Return V4L2_STD_UNKNOWN if no signal is detected.
Otherwise AND the standard mask with the detected standards.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Wed, 29 May 2013 13:18:54 +0000 (10:18 -0300)]
[media] adv7183: fix querystd
If no signal is detected, return V4L2_STD_UNKNOWN. Otherwise AND the standard
with the detected standards.
Note that the v4l2 core initializes the std with tvnorms before calling the
querystd ioctl.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Cc: Scott Jiang <scott.jiang.linux@gmail.com>
Acked-by: Scott Jiang <scott.jiang.linux@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Mon, 3 Jun 2013 08:36:50 +0000 (05:36 -0300)]
[media] v4l2: remove deprecated current_norm support completely
The use of current_norm to keep track of the current standard has been
deprecated for quite some time. Now that all drivers that were using it
have been converted to use g_std we can drop it from the core.
It was a bad idea to introduce this at the time: since it is a per-device
node field it didn't work for drivers that create multiple nodes, all sharing
the same tuner (e.g. video and vbi nodes, or a raw video node and a compressed
video node). In addition it was very surprising behavior that g_std was
implemented in the core. Often drivers implemented both g_std and current_norm,
because they didn't understand how it should be used.
Since the benefits were very limited (if they were there at all), it is better
to just drop it and require that drivers just implement g_std.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Mon, 3 Jun 2013 08:36:49 +0000 (05:36 -0300)]
[media] dt3155v4l: remove deprecated current_norm
Since this driver provides a g_std op the current_norm field isn't used
anyway, so just drop it.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Mon, 3 Jun 2013 08:36:48 +0000 (05:36 -0300)]
[media] saa7134: drop deprecated current_norm
Since this driver properly implements g_std, the current_norm field is
actually unused anyway.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Mon, 3 Jun 2013 08:36:47 +0000 (05:36 -0300)]
[media] usbvision: replace current_norm by g_std
current_norm use is deprecated because it is per-devicenode and if you
have more device nodes all dependent on the same video source, then this
no longer works. Just implement g_std instead.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Mon, 3 Jun 2013 08:36:46 +0000 (05:36 -0300)]
[media] cx23885: remove use of deprecated current_norm
The use of current_norm can be dropped. The g_std ioctl was already
implemented, so current_norm didn't do anything useful anyway.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Cc: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Mon, 3 Jun 2013 08:36:45 +0000 (05:36 -0300)]
[media] saa7164: replace current_norm by g_std
current_norm is deprecated. Replace it by g_std.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Cc: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Mon, 3 Jun 2013 08:36:44 +0000 (05:36 -0300)]
[media] tm6000: remove deprecated current_norm
Replace current_norm by g_std. Also initialize the standard to the more
common NTSC-M format (which is also what current_norm used).
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Mon, 3 Jun 2013 08:36:43 +0000 (05:36 -0300)]
[media] fsl-viu: remove current_norm
The use of current_norm is deprecated, so remove it. This driver actually
already implements g_std, which overrides current_norm, but the 'std' field
was never initialized correctly. This has been fixed as well.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Cc: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Mon, 3 Jun 2013 08:36:41 +0000 (05:36 -0300)]
[media] soc_camera: remove use of current_norm
The current_norm field is deprecated, so don't set it. Since it is set to
V4L2_STD_UNKNOWN which is 0 it didn't do anything anyway.
Also remove a few other unnecessary uses of V4L2_STD_UNKNOWN.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Mon, 3 Jun 2013 08:36:40 +0000 (05:36 -0300)]
[media] sh_vou: remove current_norm
The current_norm field is deprecated and is replaced by g_std. This driver
already implements g_std, so just remove current_norm.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Mon, 3 Jun 2013 08:36:39 +0000 (05:36 -0300)]
[media] via-camera: replace current_norm by g_std
The current_norm field is deprecated. Replace it by properly implementing
g_std.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Mon, 3 Jun 2013 08:36:38 +0000 (05:36 -0300)]
[media] mcam-core: replace current_norm by g_std
The current_norm field is deprecated, replace this by properly
implementing g_std.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Sun, 3 Feb 2013 12:51:59 +0000 (09:51 -0300)]
[media] radio-sf16fmi: add control event and prio support
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Cc: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Sun, 3 Feb 2013 12:51:06 +0000 (09:51 -0300)]
[media] radio-sf16fmi: convert to the control framework
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Cc: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Fri, 31 May 2013 09:21:03 +0000 (06:21 -0300)]
[media] radio-sf16fmi: clamp frequency
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Cc: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Sun, 3 Feb 2013 12:44:14 +0000 (09:44 -0300)]
[media] radio-sf16fmi: add device_caps support to querycap
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Cc: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Sun, 3 Feb 2013 12:43:15 +0000 (09:43 -0300)]
[media] radio-sf16fmi: remove audio/input ioctls
The audio and input ioctls do not apply to radio devices. Remove them.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Cc: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Sun, 3 Feb 2013 12:10:46 +0000 (09:10 -0300)]
[media] timblogiw: fix querycap
Don't set version (the core does that for you), fill in device_caps and
prefix bus_info with "platform:".
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Cc: Richard Röjfors <richard.rojfors@pelagicore.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Fri, 31 May 2013 09:19:55 +0000 (06:19 -0300)]
[media] tef6862: clamp frequency
Clamp the frequency to the valid frequency range as per the V4L2 specification.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Cc: Richard Röjfors <richard.rojfors@pelagicore.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Sun, 3 Feb 2013 12:33:21 +0000 (09:33 -0300)]
[media] radio-timb: add control events and prio support
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Cc: Richard Röjfors <richard.rojfors@pelagicore.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Fri, 31 May 2013 09:50:50 +0000 (06:50 -0300)]
[media] radio-timb: actually load the requested subdevs
For some reason the tuner and dsp subdevs were never actually loaded.
Added the relevant code to do that.
Also remove bogus calls to video_device_release_empty().
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Cc: Richard Röjfors <richard.rojfors@pelagicore.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Fri, 31 May 2013 09:28:49 +0000 (06:28 -0300)]
[media] radio-timb: convert to the control framework
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Cc: Richard Röjfors <richard.rojfors@pelagicore.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Sun, 3 Feb 2013 12:05:16 +0000 (09:05 -0300)]
[media] radio-timb: add device_caps support, remove input/audio ioctls
The audio and input ioctls are not applicable for radio devices,
remove them.
Also set the device_caps field in v4l2_querycap.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Cc: Richard Röjfors <richard.rojfors@pelagicore.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Fri, 31 May 2013 09:19:04 +0000 (06:19 -0300)]
[media] radio-tea5764: some cleanups and clamp frequency when out-of-range
Some small cleanups and when setting the frequency it is now clamped
to the valid frequency range instead of returning an error.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Cc: Fabio Belavenuto <belavenuto@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Sun, 3 Feb 2013 11:39:09 +0000 (08:39 -0300)]
[media] radio-tea5764: add prio and control event support
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Cc: Fabio Belavenuto <belavenuto@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Sun, 3 Feb 2013 11:36:42 +0000 (08:36 -0300)]
[media] radio-tea5764: add device_caps support
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Cc: Fabio Belavenuto <belavenuto@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Sun, 3 Feb 2013 11:35:06 +0000 (08:35 -0300)]
[media] radio-tea5764: audio and input ioctls do not apply to radio devices
Deleted those ioctls from this driver.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Cc: Fabio Belavenuto <belavenuto@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Sun, 3 Feb 2013 11:34:18 +0000 (08:34 -0300)]
[media] radio-tea5764: convert to the control framework
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Cc: Fabio Belavenuto <belavenuto@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Sun, 3 Feb 2013 11:27:57 +0000 (08:27 -0300)]
[media] radio-tea5764: embed struct video_device
This simplifies the code as it removes a memory allocation check.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Cc: Fabio Belavenuto <belavenuto@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Sun, 3 Feb 2013 11:25:32 +0000 (08:25 -0300)]
[media] radio-tea5764: add support for struct v4l2_device
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Cc: Fabio Belavenuto <belavenuto@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Mon, 10 Jun 2013 07:51:42 +0000 (04:51 -0300)]
[media] saa6752hs: convert to the control framework
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Fri, 31 May 2013 09:17:42 +0000 (06:17 -0300)]
[media] sr030pc30: convert to the control framework
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Mon, 10 Jun 2013 07:50:11 +0000 (04:50 -0300)]
[media] saa7706h: convert to the control framework
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Cc: Richard Röjfors <richard.rojfors@pelagicore.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Wed, 29 May 2013 10:59:57 +0000 (07:59 -0300)]
[media] v4l2-framework: replace g_chip_ident by g_std in the examples
The framework documentation used the g_chip_ident op as an example. This
op has been removed, so replace its use in the examples by the g_std op.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Cc: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Wed, 29 May 2013 10:00:11 +0000 (07:00 -0300)]
[media] DocBook/media/v4l: update VIDIOC_DBG_ documentation
- Remove the "On failure the structure remains unchanged." part since
that isn't necessarily true.
- Document the 'size' field.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Wed, 29 May 2013 10:00:10 +0000 (07:00 -0300)]
[media] ivtv: fix register range check
Ensure that the register is aligned to a dword, otherwise the range check
could fail since it assumes dword alignment.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Cc: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Wed, 29 May 2013 10:00:08 +0000 (07:00 -0300)]
[media] cx18: fix register range check
Ensure that the register is aligned to a dword, otherwise the range check
could fail since it assumes dword alignment.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Cc: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Wed, 29 May 2013 10:00:07 +0000 (07:00 -0300)]
[media] media/i2c: fill in missing reg->size fields
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Wed, 29 May 2013 10:00:06 +0000 (07:00 -0300)]
[media] pvrusb2: drop g/s_register ioctls
Register access to subdevices no longer needs bridge support for those
ioctls. The v4l2 core handles that these days.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Cc: Mike Isely <isely@isely.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Wed, 29 May 2013 10:00:05 +0000 (07:00 -0300)]
[media] sn9c20x: the reg->size field wasn't filled in
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Wed, 29 May 2013 10:00:04 +0000 (07:00 -0300)]
[media] cx231xx: the reg->size field wasn't filled in
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Wed, 29 May 2013 10:00:03 +0000 (07:00 -0300)]
[media] au0828: set reg->size
The size field wasn't filled in.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Wed, 29 May 2013 10:00:02 +0000 (07:00 -0300)]
[media] marvell-ccic: check register address
Prevent out-of-range register accesses.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Wed, 29 May 2013 10:00:01 +0000 (07:00 -0300)]
[media] vpbe_display: drop g/s_register ioctls
These are no longer needed: register access to subdevices no longer needs
the bridge driver to forward them.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Wed, 29 May 2013 10:00:00 +0000 (07:00 -0300)]
[media] mxb: check register address when reading/writing a register
Prevent out-of-range register accesses.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Wed, 29 May 2013 09:59:59 +0000 (06:59 -0300)]
[media] saa7134: check register address in g_register
Prevent reading out-of-range register values.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Wed, 29 May 2013 09:59:52 +0000 (06:59 -0300)]
[media] cx25840: remove the v4l2-chip-ident.h include
Replace the V4L2_IDENT_ macros from v4l2-chip-ident.h with driver specific
defines.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Wed, 29 May 2013 09:59:51 +0000 (06:59 -0300)]
[media] media/i2c: remove g_chip_ident op
This is no longer needed since the core now handles this through DBG_G_CHIP_INFO.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Wed, 29 May 2013 09:59:50 +0000 (06:59 -0300)]
[media] soc_camera sensors: remove g_chip_ident op
This is no longer needed since the core now handles this through DBG_G_CHIP_INFO.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Wed, 29 May 2013 09:59:49 +0000 (06:59 -0300)]
[media] indycam: remove g_chip_ident op
This is no longer needed since the core now handles this through DBG_G_CHIP_INFO.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Wed, 29 May 2013 09:59:48 +0000 (06:59 -0300)]
[media] radio: remove g_chip_ident op
This is no longer needed since the core now handles this through DBG_G_CHIP_INFO.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Wed, 29 May 2013 09:59:47 +0000 (06:59 -0300)]
[media] au8522_decoder: remove g_chip_ident op
This is no longer needed since the core now handles this through DBG_G_CHIP_INFO.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Wed, 29 May 2013 09:59:45 +0000 (06:59 -0300)]
[media] tveeprom: remove v4l2-chip-ident.h include
Replace the V4L2_IDENT_* usage with tveeprom-specific defines. This header
is deprecated, so those defines shouldn't be used anymore.
The em28xx driver is the only one that uses the tveeprom audio_processor
field, so that has been updated to use the new tveeprom AUDPROC define.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Wed, 29 May 2013 09:59:44 +0000 (06:59 -0300)]
[media] marvell-ccic: remove g_chip_ident
Remove g_chip_ident. This driver used some of the V4L2_IDENT defines, replace
those with a driver-specific enum. This makes it possible to drop the
v4l2-chip-ident.h define as well.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Wed, 29 May 2013 09:59:43 +0000 (06:59 -0300)]
[media] cx231xx: remove g_chip_ident
Remove g_chip_ident and replace it with g_chip_info.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Wed, 29 May 2013 09:59:42 +0000 (06:59 -0300)]
[media] gspca: remove g_chip_ident
Remove g_chip_ident and replace it with g_chip_info.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Wed, 29 May 2013 09:59:41 +0000 (06:59 -0300)]
[media] saa6752hs: drop obsolete g_chip_ident
This op and the v4l2-chip-ident.h header are no longer needed.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Wed, 29 May 2013 09:59:39 +0000 (06:59 -0300)]
[media] cx23885: remove g_chip_ident
Replace g_chip_ident by g_chip_info. Note that the IR support is implemented
as a subdev, so this part no longer needs to be handled as a 'bridge' chip.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Wed, 29 May 2013 09:59:38 +0000 (06:59 -0300)]
[media] ivtv: remove g_chip_ident
g_chip_ident was used to determine if a saa7114 or saa7115 was used. Instead
just check the subdev name.
After that the g_chip_ident function can be removed.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Wed, 29 May 2013 09:59:37 +0000 (06:59 -0300)]
[media] saa7115: add back the dropped 'found' message
The saa7115 driver used to show a 'chip found' message during probe. This
was accidentally dropped during recent commits. Add it back as it is quite
useful.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Wed, 29 May 2013 09:59:36 +0000 (06:59 -0300)]
[media] cx18: remove g_chip_ident support
The av-core is really a subdev, so there is no need anymore to act as if it
is a 'second' bridge chip.
As a result of this the g_chip_ident implementation can be completely dropped.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Wed, 29 May 2013 09:59:35 +0000 (06:59 -0300)]
[media] v4l2: remove g_chip_ident from bridge drivers where it is easy to do so
VIDIOC_DBG_G_CHIP_IDENT has been replaced by VIDIOC_DBG_G_CHIP_INFO. Remove
g_chip_ident support from bridge drivers since it is no longer needed.
This patch takes care of all the trivial cases.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Acked-by: Scott Jiang <scott.jiang.linux@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Wed, 29 May 2013 09:59:34 +0000 (06:59 -0300)]
[media] v4l2-ioctl: dbg_g/s_register: only match BRIDGE and SUBDEV types
Drop support for V4L2_CHIP_MATCH_I2C_DRIVER/ADDR and V4L2_CHIP_MATCH_AC97
types. The following patches will remove support for those in the drivers
as well.
This means that bridge drivers no longer have to check for the match.type
field in their g/s_register implementations. Only if they also implement
g_chip_info do they still have to check the match.addr field, otherwise the
core will check for that as well.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Lad, Prabhakar [Sat, 25 May 2013 16:39:36 +0000 (13:39 -0300)]
[media] media: i2c: ths7303: make the pdata as a constant pointer
generally the pdata needs to be a constant pointer in the device
state structure. This patch makes the pdata as a constant pointer
and alongside returns -EINVAL when pdata is NULL.
Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Lad, Prabhakar [Sat, 25 May 2013 16:39:35 +0000 (13:39 -0300)]
[media] media: i2c: ths7303: remove unnecessary function ths7303_setup()
the ths7303_setup() was doing the same thing as ths7303_setval()
except that ths7303_setval() sets it to some particular mode.
This patch removes ths7303_setup() function and calls ths7303_setval()
in the probe setting the device to 480I_576I filter mode in the probe.
Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Lad, Prabhakar [Sat, 25 May 2013 16:39:34 +0000 (13:39 -0300)]
[media] media: i2c: ths7303: remove init_enable option from pdata
This patch removes init_enable option from pdata, the init_enable
was intended that the device should start streaming video immediately
but ideally the bridge drivers should call s_stream explicitly for such
devices to start video.
Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Lad, Prabhakar [Sat, 25 May 2013 16:39:33 +0000 (13:39 -0300)]
[media] ARM: davinci: dm365 evm: remove init_enable from ths7303 pdata
Remove init_enable from ths7303 pdata as it is being dropped
from ths7303_platform_data.
The purpose of init_enable was that the device should start streaming video
immediately but instead the bridge drivers should call s_stream explicitly
for such devices. This is in fact what happens for the dm365, so setting
init_enable here never made sense in the first place.
Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
[hans.verkuil@cisco.com: improve the commit comment]
Acked-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Antti Palosaari [Sun, 2 Jun 2013 22:41:46 +0000 (19:41 -0300)]
[media] radio-keene: add delay in order to settle hardware
It was found by trial and error testing that at least 11 ms delay is
needed before first I/O, otherwise device will skip given command.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Sun, 2 Jun 2013 22:41:45 +0000 (19:41 -0300)]
[media] radio-keene: set initial frequency
The device was never set to the initial frequency.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Fri, 31 May 2013 08:15:17 +0000 (05:15 -0300)]
[media] ml86v7667: fix the querystd implementation
The *std should be set to V4L2_STD_UNKNOWN, not the function's return code.
Also, *std should be ANDed with 525_60 or 625_50.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Vladimir Barinov [Wed, 29 May 2013 17:52:28 +0000 (14:52 -0300)]
[media] ML86V7667: new video decoder driver
Add OKI Semiconductor ML86V7667 video decoder driver.
[Sergei: added v4l2_device_unregister_subdev() call to the error cleanup path
of ml86v7667_probe(), renamed ml86v7667_try_mbus_fmt() to ml86v7667_mbus_fmt(),
killed v4l2_chip_match_i2c_client() checks in the [gs]_register() methods, fixed
the prototype of the s_register() method, did some cleanup.]
Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
projects / platform / kernel / linux-exynos.git / log