Paul Wilkins [Thu, 16 Feb 2017 10:01:57 +0000 (10:01 +0000)]
Merge "Remove unnecessary factor."
Paul Wilkins [Thu, 16 Feb 2017 10:01:45 +0000 (10:01 +0000)]
Merge "Bug in scale_sse_threshold()"
Paul Wilkins [Thu, 16 Feb 2017 09:39:29 +0000 (09:39 +0000)]
Merge "Additional first pass stats."
Johann Koenig [Thu, 16 Feb 2017 02:40:59 +0000 (02:40 +0000)]
Merge "Use 'packssdw' for loading tran_low_t values"
Johann Koenig [Thu, 16 Feb 2017 01:00:44 +0000 (01:00 +0000)]
Merge "vp8_dx_iface: remove unused 'else' condition"
James Zern [Thu, 16 Feb 2017 00:21:19 +0000 (00:21 +0000)]
Merge "vpx_temporal_svc_encoder.sh: remove FUNCNAME bashism"
Marco Paniconi [Wed, 15 Feb 2017 23:03:27 +0000 (23:03 +0000)]
Merge "vp9: Some code cleanup for aq-mode = 3."
Marco [Wed, 15 Feb 2017 21:51:14 +0000 (13:51 -0800)]
vp9: Some code cleanup for aq-mode = 3.
The weight segment needs to only be computed once per frame,
so remove it from the funciton vp9_cyclic_refresh_rc_bits_per_mb(),
which is called within a loop inside vp9_rc_regulate_q.
Change-Id: Ia0e18b89abb97e42c466d4dbc47700d7f76555db
Jerome Jiang [Wed, 15 Feb 2017 03:09:15 +0000 (19:09 -0800)]
vpx_temporal_svc_encoder: Expose error resilient control to cmd line.
Change-Id: Ic74a8690b136ffbc370080f70b2d5a6b1572bf63
Linfeng Zhang [Wed, 15 Feb 2017 20:18:23 +0000 (20:18 +0000)]
Merge "cosmetics,dsp/inv_txfm.c: reorder functions"
Marco Paniconi [Wed, 15 Feb 2017 20:07:19 +0000 (20:07 +0000)]
Merge "vp9. Use same source_sad threshold for all speeds."
Linfeng Zhang [Wed, 15 Feb 2017 00:27:30 +0000 (16:27 -0800)]
cosmetics,dsp/inv_txfm.c: reorder functions
Change-Id: Ie0f7689ebe230c68eadb22a32b14838c1a7543a6
Linfeng Zhang [Wed, 15 Feb 2017 19:34:18 +0000 (19:34 +0000)]
Merge "Add vpx_highbd_idct16x16_38_add_neon()"
Marco [Wed, 15 Feb 2017 19:26:29 +0000 (11:26 -0800)]
vp9. Use same source_sad threshold for all speeds.
Only affects real-time mode.
Change-Id: Iba836f110c4da936f5173cc0f54424d5b6121bff
Marco [Wed, 15 Feb 2017 17:18:34 +0000 (09:18 -0800)]
Vp9: Speed 8 aq-mode=3: Reduce computation in estimating bits per mb.
vp9_compute_qdelta_by_rate has almost 2% overhead in profiling on Nexus 6.
Reduce the calling of that function in speed 8 by estimating the delta-q.
Both rtc and rtc_derf show little/no change in avg psnr/ssim.
Encoding speed is 2~3% faster on Nexus 6.
Change-Id: If25933715783f31104a18a5092ea347b1221b5f5
Linfeng Zhang [Wed, 8 Feb 2017 00:58:12 +0000 (16:58 -0800)]
Add vpx_highbd_idct16x16_38_add_neon()
BUG=webm:1301
Change-Id: Ic6cd8c1e63e1b7a997cbed221e20fff4c599e0fe
Linfeng Zhang [Wed, 15 Feb 2017 17:06:16 +0000 (17:06 +0000)]
Merge "Add vpx_highbd_idct16x16_38_add_c()"
paulwilkins [Tue, 14 Feb 2017 10:35:12 +0000 (10:35 +0000)]
Remove unnecessary factor.
Removed unnecessary scaling factor to simplify.
Change-Id: I3fc9c5975a2597e72f1324e09dd586dea1facfa7
paulwilkins [Thu, 9 Feb 2017 16:30:38 +0000 (16:30 +0000)]
Bug in scale_sse_threshold()
The function scale_sse_threshold() returns a threshold scaled
if necessary for use with 10 and 12 bit from an 8 bit baseline.
SSE error values would be expected to rise for the 10 and 12
bit cases where there are more bits of precision.
Hence the threshold used for the test should also be scaled up.
Change-Id: I4009c98b6eecd1bf64c3c38aaa56598e0136b03d
paulwilkins [Mon, 12 Dec 2016 14:05:19 +0000 (14:05 +0000)]
Additional first pass stats.
Added counts that split the intra coded blocks into low and high variance.
Change-Id: Ic540144b34d5141659081bb22f7ee16fd6861f14
Paul Wilkins [Wed, 15 Feb 2017 10:37:02 +0000 (10:37 +0000)]
Merge "Aggressive VBR method."
James Zern [Wed, 15 Feb 2017 07:44:00 +0000 (23:44 -0800)]
vpx_temporal_svc_encoder.sh: remove FUNCNAME bashism
replace with an explicit output file prefix that matches the function
name
Change-Id: I7f6a4105adb34327b1099a5fbf132aa8d1ad5b90
Johann Koenig [Wed, 15 Feb 2017 01:33:00 +0000 (01:33 +0000)]
Merge "vp9 fdct higbd neon: connect existing highbd calls"
Linfeng Zhang [Tue, 14 Feb 2017 23:39:37 +0000 (15:39 -0800)]
Add vpx_highbd_idct16x16_38_add_c()
When eob is less than or equal to 38 for high-bitdepth 16x16 idct,
call this function.
BUG=webm:1301
Change-Id: I09167f89d29c401f9c36710b0fd2d02644052060
Yunqing Wang [Wed, 15 Feb 2017 00:54:10 +0000 (00:54 +0000)]
Merge "Row based multi-threading of encoding stage"
Ranjit Kumar Tulabandu [Fri, 10 Feb 2017 10:55:50 +0000 (16:25 +0530)]
Row based multi-threading of encoding stage
(Yunqing Wang)
This patch implements the row-based multi-threading within tiles in
the encoding pass, and substantially speeds up the multi-threaded
encoder in VP9.
Speed tests at speed 1 on STDHD(using 4 tiles) set show that the
average speedups of the encoding pass(second pass in the 2-pass
encoding) is 7% while using 2 threads, 16% while using 4 threads,
85% while using 8 threads, and 116% while using 16 threads.
Change-Id: I12e41dbc171951958af9e6d098efd6e2c82827de
Linfeng Zhang [Wed, 15 Feb 2017 00:46:29 +0000 (00:46 +0000)]
Merge "Replace 14 with DCT_CONST_BITS in idct NEON functions' shifts"
Johann [Tue, 31 Jan 2017 23:40:58 +0000 (15:40 -0800)]
vp8_dx_iface: remove unused 'else' condition
Clears up static clang analysis warning regarding a dead store.
Change-Id: If4fe7a9a7f94c6e2001d46136944f90712e543b4
Johann [Tue, 14 Feb 2017 22:26:09 +0000 (14:26 -0800)]
Use 'packssdw' for loading tran_low_t values
This matches bitdepth_conversion_sse2.asm and produces substantially
better assembly. The old way had lots of 'movzwl' and 'shl' and storing
back to memory before loading into an xmm register.
Change-Id: Ib33e35354dfd691a4f8b1e39f4dbcbb14cd5302b
Johann [Fri, 3 Feb 2017 23:25:50 +0000 (15:25 -0800)]
vp9 fdct higbd neon: connect existing highbd calls
Change-Id: Ia8f822bd6e70b3911bc433a5a750bfb6f9a3a75c
Johann Koenig [Tue, 14 Feb 2017 21:28:22 +0000 (21:28 +0000)]
Merge "quantize_fp highbd neon: use tran_low_t for coeff"
Linfeng Zhang [Tue, 14 Feb 2017 20:44:57 +0000 (12:44 -0800)]
Replace 14 with DCT_CONST_BITS in idct NEON functions' shifts
Change-Id: I2a39a3bb87516b04d273bc1c0f4a634e3fb6f0f6
clang-format [Tue, 14 Feb 2017 04:06:18 +0000 (20:06 -0800)]
apply clang-format
Change-Id: I75e4a9e0b37bd4586f26c8d6c1fa27f3f6ff1bce
James Zern [Wed, 1 Feb 2017 02:06:43 +0000 (18:06 -0800)]
.clang-format: update to 3.9.1
Change-Id: Ia51f2201df897651067d09122075953382b59139
Yi Luo [Tue, 14 Feb 2017 20:13:26 +0000 (20:13 +0000)]
Merge "Replace idct32x32_34_add_ssse3 assembly with intrinsics"
Yi Luo [Wed, 8 Feb 2017 19:09:03 +0000 (11:09 -0800)]
Replace idct32x32_34_add_ssse3 assembly with intrinsics
- No user-level speed performance change.
- Pass unit tests.
Change-Id: Idfc598e00f354265e41f6b3219f4734216c115c6
Johann [Fri, 3 Feb 2017 22:24:32 +0000 (14:24 -0800)]
quantize_fp highbd neon: use tran_low_t for coeff
Change-Id: I90fd815f15884490ad138f35df575a00d31e8c95
Johann [Tue, 31 Jan 2017 23:51:15 +0000 (15:51 -0800)]
vp8 onyx_if: assert divide by zero
Clears up static clang analysis warning regarding divide by zero.
Trying to explain to the compiler how it's impossible to avoid
incrementing num_blocks at least once is difficult.
Change-Id: Ibaae43be572e5cd7a689b440dcd341c17d33443b
Johann Koenig [Tue, 14 Feb 2017 03:02:50 +0000 (03:02 +0000)]
Merge "Remove UNINITIALIZED_IS_SAFE"
Linfeng Zhang [Tue, 14 Feb 2017 01:15:34 +0000 (01:15 +0000)]
Merge "Add vpx_highbd_idct16x16_256_add_neon()"
Johann [Tue, 31 Jan 2017 23:18:40 +0000 (15:18 -0800)]
Remove UNINITIALIZED_IS_SAFE
Where clang static analysis or gcc -Wmaybe-uninitialized warns of
uninitialized values, assign 0 to ints, MB_MODE_COUNT to
MB_PREDICTION_MODE, and B_MODE_COUNT to B_PREDICTION_MODE.
Assert that the modes have been changed from the invalid value by
the end of the function.
Change-Id: Ib11e1ffb08f0a6fe4b6c6729dc93b83b1c4b6350
Linfeng Zhang [Thu, 2 Feb 2017 00:32:57 +0000 (16:32 -0800)]
Add vpx_highbd_idct16x16_256_add_neon()
BUG=webm:1301
Change-Id: I6bb755552a39bdd26eef3f449601f6a9766c65ec
Johann Koenig [Mon, 13 Feb 2017 23:11:30 +0000 (23:11 +0000)]
Merge "fdct8x8 highbd neon: use tran_low_t for output"
Johann [Fri, 3 Feb 2017 23:14:06 +0000 (15:14 -0800)]
fdct8x8 highbd neon: use tran_low_t for output
Change-Id: I100c4a1955d80bec4d28e82796b3e7f57e84d0ba
Yunqing Wang [Mon, 13 Feb 2017 20:29:31 +0000 (12:29 -0800)]
The bitstream bit match test in multi-threaded encoder
While the new-mt mode is enabled(namely, allowing to use row-based
multi-threading in encoder), several speed features that adaptively
adjust encoding parameters during encoding would cause mismatch
between single-thread encoded bitstream and multi-thread encoded
bitstream. This patch provides a set_control API to disable these
features, so that the bit match bitstream is obtained in the unit
test.
Change-Id: Ie9868bafdfe196296d1dd29e0dca517f6a9a4d60
Yunqing Wang [Mon, 13 Feb 2017 21:01:41 +0000 (21:01 +0000)]
Merge "Minor code style refactoring"
James Zern [Mon, 13 Feb 2017 21:01:18 +0000 (21:01 +0000)]
Merge "cosmetics,vp9_ratectrl: apply clang-format"
James Zern [Mon, 13 Feb 2017 21:00:33 +0000 (21:00 +0000)]
Merge "vpx_usec_timer_elapsed: use 64-bit math"
Yunqing Wang [Mon, 13 Feb 2017 20:59:01 +0000 (12:59 -0800)]
Minor code style refactoring
Change-Id: I20107693d0a87e08a10520bfb573ff3dcef69fdb
James Zern [Mon, 13 Feb 2017 19:29:39 +0000 (11:29 -0800)]
cosmetics,vp9_ratectrl: apply clang-format
broken since:
c3f095c8b Merge "Fix to avoid abrupt relaxation of max qindex in recode path"
5f21aba4b Fix to avoid abrupt relaxation of max qindex in recode path
the original change pre-dated the addition of .clang-format
Change-Id: If5e399d9a805bcad9147360b13b36fbc8c560a7c
Linfeng Zhang [Fri, 13 Jan 2017 18:01:51 +0000 (10:01 -0800)]
Add vpx_highbd_idct{16x16,32x32}_1_add_neon()
and update vpx_highbd_idct8x8_1_add_neon()
BUG=webm:1301
Change-Id: I18d1a0cbe98ba822d5194c1b4e13a4c29c5c75f4
paulwilkins [Thu, 5 Jan 2017 12:35:53 +0000 (12:35 +0000)]
Aggressive VBR method.
VBR method that allows a wider Q range for the first normal frame
in each ARF group and then centers the min - max range for the rest of
the arf group on the chosen Q value for that first frame.
This allows for quite rapid adjustment of the active Q range even if the
initial estimate is poor.
In some cases where the ARF frames themselves are tending to
undershoot but the normal frames are overshooting this can still give
net undershoot. This can be corrected by allowing a larger Q delta for
arf frames but is usually is a sign that the allocation to the arfs was to
high.
Change-Id: Icec87758925d8f7aeb2dca29aac0ff9496237469
James Zern [Sat, 11 Feb 2017 03:42:35 +0000 (03:42 +0000)]
Merge "Add vpx_idct16x16_38_add_neon()"
Marco [Tue, 7 Feb 2017 19:46:36 +0000 (11:46 -0800)]
vp9: Non-rd mode: use simple block_yrd for 8 bit high bitdepth builds
Temporary fix until optimization work for block_yrd is completed.
This essentially reverts back to the state before the change:
https://chromium-review.googlesource.com/c/433821/
Compression loss is about ~5-6% on RTC set.
Speed-up (from using this simple/model-based block_yrd) over the low
bitdepth builds (which uses more complex block_yrd) is ~5% on 720p.
Change-Id: Ie0af9eb0d111e5595f587870c44f08317403b8d8
James Zern [Fri, 10 Feb 2017 03:28:59 +0000 (19:28 -0800)]
vpx_usec_timer_elapsed: use 64-bit math
this prevents a rollover when tv_sec is a long:
signed integer overflow: 2776 * 1000000 cannot be represented in type
'long'
Change-Id: I03dc4476ee122b02e2856dad28358a20cf16a9f8
Paul Wilkins [Thu, 9 Feb 2017 17:17:55 +0000 (17:17 +0000)]
Merge "Fix to avoid abrupt relaxation of max qindex in recode path"
Paul Wilkins [Thu, 9 Feb 2017 17:17:44 +0000 (17:17 +0000)]
Merge "Fix for max qindex calculation of a gf interval"
Linfeng Zhang [Tue, 7 Feb 2017 18:06:21 +0000 (10:06 -0800)]
Add vpx_idct16x16_38_add_neon()
The RunQuantCheck() test on it exposes 16-bit overflow in stage 7 of
pass 2. Change to use saturating add/sub for both
vpx_idct16x16_38_add_neon() and vpx_idct16x16_256_add_neon() for high
bitdepth.
Change-Id: Ibf4c107a887553a52852cc582e28d38a5a5a2712
Yi Luo [Wed, 8 Feb 2017 00:40:10 +0000 (16:40 -0800)]
Replace idct8x8_12_add_ssse3 assembly code with intrinsics
- Performance achieves the same as assembly.
- Unit tests pass.
Change-Id: I6eacfbbd826b3946c724d78fbef7948af6406ccd
Linfeng Zhang [Wed, 8 Feb 2017 17:20:19 +0000 (17:20 +0000)]
Merge "Add vpx_idct16x16_38_add_c()"
Johann Koenig [Tue, 7 Feb 2017 23:26:09 +0000 (23:26 +0000)]
Merge "block_error_fp highbd sse2: use tran_low_t for coeff"
Marco Paniconi [Tue, 7 Feb 2017 22:24:59 +0000 (22:24 +0000)]
Merge "vp9: Denoiser speed-up: increase partition and ac skip thresholds."
Yunqing Wang [Tue, 7 Feb 2017 19:55:40 +0000 (19:55 +0000)]
Merge "Row based multi-threading of ARNR filtering stage"
Marco Paniconi [Tue, 7 Feb 2017 19:25:47 +0000 (19:25 +0000)]
Merge "vp9: Adjust rate_err threshold for setting active_worst factor."
Marco [Tue, 7 Feb 2017 01:02:28 +0000 (17:02 -0800)]
vp9: Denoiser speed-up: increase partition and ac skip thresholds.
Add factor to increase varianace partition and ac skip thresholds,
under certain conditions (noise level and sum_diff), to increase
denoiser speed.
Change-Id: I7671140ef3598bf5f114a72623d68792bcd7b77b
Linfeng Zhang [Wed, 11 Jan 2017 20:22:37 +0000 (12:22 -0800)]
Add vpx_idct16x16_38_add_c()
When eob is less than or equal to 38 for 16x16 idct, call this function.
Change-Id: Ief6f3fb16a49ace3c92cebf4e220bf5bf52a6087
Marco [Tue, 7 Feb 2017 17:35:56 +0000 (09:35 -0800)]
vp9: Adjust rate_err threshold for setting active_worst factor.
Only affects 1 pass vbr.
Small improvement on ytlive set.
Change-Id: I09a7456fe658fbea82ece1035cf683bd8bd8bd14
Linfeng Zhang [Tue, 7 Feb 2017 16:52:39 +0000 (16:52 +0000)]
Merge "Update 16x16 8-bit idct NEON intrinsics"
Johann [Thu, 2 Feb 2017 23:28:16 +0000 (15:28 -0800)]
block_error_fp highbd sse2: use tran_low_t for coeff
BUG=webm:1365
Change-Id: Id2ed3ebaaaa6a4b68628c23e08b64ea5f1341761
Ranjit Kumar Tulabandu [Mon, 6 Feb 2017 13:44:16 +0000 (19:14 +0530)]
Row based multi-threading of ARNR filtering stage
Change-Id: Ic238d32c7e10b730342224ab56712a89a6026a8f
Johann Koenig [Tue, 7 Feb 2017 02:49:58 +0000 (02:49 +0000)]
Merge "highbd x86: consolidate tran_low_t conversions"
Jerome Jiang [Fri, 3 Feb 2017 01:51:01 +0000 (17:51 -0800)]
vp9: speed 8: Tune threshold of ac skip and partitioning.
Threshold for partitioning only affects VGA and lower res.
0.07% quality regression is observed in borg tests on rtc_derf
and 0.2% regression on rtc.
5.6% speed up for low res and 6.8% for VGA on Nexus 6.
Change-Id: If85a2919b48c991de66059c90f32ed06980452be
Johann [Thu, 2 Feb 2017 22:17:26 +0000 (14:17 -0800)]
highbd x86: consolidate tran_low_t conversions
Create new helper files specifically for converting tran_low_t types.
Change-Id: I7c4c458ef910f3b3d10a3cfbf9df4de7682fd905
Yunqing Wang [Sat, 4 Feb 2017 01:02:29 +0000 (01:02 +0000)]
Merge "Changes to facilitate multi-threading of encoding stage"
Yunqing Wang [Fri, 3 Feb 2017 16:29:21 +0000 (08:29 -0800)]
Fix visual studio build failure
Fixed the following issue.
..\test\vp9_ethread_test.cc(69): warning C4805: '|=' : unsafe mix of type 'bool' and type 'int' in operation [C:\src\buildbot\test-libvpx\tests\dveCPjwhBE\.build-x86_64-win64-vs10\test_libvpx.vcxproj]
..\test\vp9_ethread_test.cc(69): warning C4800: 'int' : forcing value to bool 'true' or 'false' (performance warning) [C:\src\buildbot\test-libvpx\tests\dveCPjwhBE\.build-x86_64-win64-vs10\test_libvpx.vcxproj]
Change-Id: I37f897cf12a0b7500d2fcbac9e4615f08a83fdb4
Jerome Jiang [Thu, 2 Feb 2017 22:20:42 +0000 (22:20 +0000)]
Merge "Add unit tests for vp9_block_error_fp."
Jingning Han [Thu, 2 Feb 2017 22:18:31 +0000 (22:18 +0000)]
Merge "Add SSSE3 intrinsic 8x8 inverse 2D-DCT"
Jerome Jiang [Wed, 1 Feb 2017 04:21:55 +0000 (20:21 -0800)]
Add unit tests for vp9_block_error_fp.
BUG=webm:1365
Change-Id: I004e5cd7ca331d14b31b7fc3edeee45fce064026
Johann Koenig [Thu, 2 Feb 2017 20:15:45 +0000 (20:15 +0000)]
Merge "Update third_party/googletest to 1.8.0"
Johann [Thu, 26 Jan 2017 22:34:45 +0000 (14:34 -0800)]
Update third_party/googletest to 1.8.0
Change-Id: If61137e28291f2a0911e9260eb58f234e0d8594c
Ranjit Kumar Tulabandu [Thu, 2 Feb 2017 08:49:29 +0000 (14:19 +0530)]
Changes to facilitate multi-threading of encoding stage
Modified the encoding stage to have row level entry points with relevant
initializations and to access the token information at row level
Change-Id: Ife10e55a7c1a420ee906d711caf75002688d9e39
Kaustubh Raste [Thu, 2 Feb 2017 08:09:21 +0000 (08:09 +0000)]
Merge "Add mips msa sum_squares_2d_i16 function"
Johann Koenig [Thu, 2 Feb 2017 03:25:31 +0000 (03:25 +0000)]
Merge "Remove neon assembly for idct 16x16 and 8x8"
Johann Koenig [Thu, 2 Feb 2017 03:03:58 +0000 (03:03 +0000)]
Merge changes I43521ad3,I013659f6
* changes:
satd highbd neon: use tran_low_t for coeff
satd highbd sse2: use tran_low_t for coeff
Linfeng Zhang [Mon, 30 Jan 2017 20:25:58 +0000 (12:25 -0800)]
Update 16x16 8-bit idct NEON intrinsics
Remove redundant memory accesses.
Change-Id: I8049074bdba5f49eab7e735b2b377423a69cd4c8
Jingning Han [Wed, 1 Feb 2017 20:19:01 +0000 (12:19 -0800)]
Add SSSE3 intrinsic 8x8 inverse 2D-DCT
The intrinsic version reduces the average cycles from 183 to 175.
Change-Id: I7c1bcdb0a830266e93d8347aed38120fb3be0e03
Yunqing Wang [Wed, 1 Feb 2017 22:04:14 +0000 (22:04 +0000)]
Merge "Changes to facilitate row based multi-threading of ARNR filtering"
Johann Koenig [Wed, 1 Feb 2017 21:56:35 +0000 (21:56 +0000)]
Merge changes I374dfc08,I7e15192e,Ica414007
* changes:
hadamard highbd ssse3: use tran_low_t for coeff
hadamard highbd neon: use tran_low_t for coeff
hadamard highbd sse2: use tran_low_t for coeff
Ranjit Kumar Tulabandu [Wed, 1 Feb 2017 11:04:49 +0000 (16:34 +0530)]
Changes to facilitate row based multi-threading of ARNR filtering
Change-Id: I2fd72af00afbbeb903e4fe364611abcc148f2fbb
Johann Koenig [Wed, 1 Feb 2017 20:55:11 +0000 (20:55 +0000)]
Merge "vp9_rdopt: declare 'c' closer to use"
Johann [Tue, 31 Jan 2017 23:35:20 +0000 (15:35 -0800)]
vp9_rdopt: declare 'c' closer to use
Clears up static clang analysis warning regarding a dead store. Only
declare 'c' when it will be used.
Change-Id: I1ac0fc7f94bc44da63938c63cd1efcd6b95e0eb3
Johann Koenig [Wed, 1 Feb 2017 19:57:29 +0000 (19:57 +0000)]
Merge "deblock: annotate postproc parameters"
Johann [Tue, 31 Jan 2017 00:03:05 +0000 (16:03 -0800)]
satd highbd neon: use tran_low_t for coeff
BUG=webm:1365
Change-Id: I43521ad32b6c96737a8ef2b8c327f901fd7eaf84
Johann [Mon, 30 Jan 2017 19:39:02 +0000 (11:39 -0800)]
satd highbd sse2: use tran_low_t for coeff
BUG=webm:1365
Change-Id: I013659f6b9fbf9cc52ab840eae520fe0b5f883fb
Johann [Tue, 31 Jan 2017 16:16:19 +0000 (08:16 -0800)]
hadamard highbd ssse3: use tran_low_t for coeff
BUG=webm:1365
Change-Id: I374dfc08732932382043905f128e928b08cb4f57
Johann [Tue, 31 Jan 2017 00:16:27 +0000 (16:16 -0800)]
hadamard highbd neon: use tran_low_t for coeff
BUG=webm:1365
Change-Id: I7e15192ead3a3631755b386f102c979f06e26279
Johann [Fri, 27 Jan 2017 21:37:36 +0000 (13:37 -0800)]
hadamard highbd sse2: use tran_low_t for coeff
BUG=webm:1365
Change-Id: Ica414007d8412ceebfffa9e58e8416226a3fe934
Johann Koenig [Wed, 1 Feb 2017 19:41:41 +0000 (19:41 +0000)]
Merge "quantize ssse3: remove unused pxor"
Jingning Han [Fri, 27 Jan 2017 18:46:53 +0000 (10:46 -0800)]
Make satd unit test support all bit-depth settings
Turn on satd unit test for c function in both regular and high
bit-depth settings.
Change-Id: I4b0c56addfb84964ede0da3ab760fe0ee640cfd0
Jingning Han [Fri, 27 Jan 2017 18:38:58 +0000 (10:38 -0800)]
Unify the hadamard transform unit test for bit-depth settings
Unify the 8x8 and 16x16 Hadamard unit test system for both 8-bit
and high bit-depth settings.
Change-Id: I53373c1d43f3ced514ad1e53e03f0fb9b25d9ead