Linus Torvalds [Wed, 6 Sep 2023 16:00:37 +0000 (09:00 -0700)]
Merge tag 'backlight-next-6.6' of git://git./linux/kernel/git/lee/backlight
Pull backlight updates from Lee Jones:
"New Functionality:
- Ensure correct includes are present and remove some that are not
required
- Drop redundant of_match_ptr() call to cast pointer to NULL
Bug Fixes:
- Revert to old (expected) behaviour of initialising PWM state on
first brightness change
- Correctly handle / propagate errors
- Fix 'sometimes-uninitialised' issues"
* tag 'backlight-next-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight:
backlight: led_bl: Remove redundant of_match_ptr()
backlight: lp855x: Drop ret variable in brightness change function
backlight: gpio_backlight: Drop output GPIO direction check for initial power state
backlight: lp855x: Catch errors when changing brightness
backlight: lp855x: Initialize PWM state on first brightness change
backlight: qcom-wled: Explicitly include correct DT includes
Daniel Mack [Fri, 1 Sep 2023 12:24:24 +0000 (14:24 +0200)]
gpio: zynq: restore zynq_gpio_irq_reqres/zynq_gpio_irq_relres callbacks
Commit
f56914393537 ("gpio: zynq: fix zynqmp_gpio not an immutable chip
warning") ditched the open-coded resource allocation handlers in favor
of the generic ones. These generic handlers don't maintain the PM
runtime anymore, which causes a regression in that level IRQs are no
longer reported.
Restore the original handlers to fix this.
Signed-off-by: Daniel Mack <daniel@zonque.org>
Fixes:
f56914393537 ("gpio: zynq: fix zynqmp_gpio not an immutable chip warning")
Cc: stable@kernel.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Qing Zhang [Wed, 6 Sep 2023 14:54:16 +0000 (22:54 +0800)]
LoongArch: Add KASAN (Kernel Address Sanitizer) support
1/8 of kernel addresses reserved for shadow memory. But for LoongArch,
There are a lot of holes between different segments and valid address
space (256T available) is insufficient to map all these segments to kasan
shadow memory with the common formula provided by kasan core, saying
(addr >> KASAN_SHADOW_SCALE_SHIFT) + KASAN_SHADOW_OFFSET
So LoongArch has a arch-specific mapping formula, different segments are
mapped individually, and only limited space lengths of these specific
segments are mapped to shadow.
At early boot stage the whole shadow region populated with just one
physical page (kasan_early_shadow_page). Later, this page is reused as
readonly zero shadow for some memory that kasan currently don't track.
After mapping the physical memory, pages for shadow memory are allocated
and mapped.
Functions like memset()/memcpy()/memmove() do a lot of memory accesses.
If bad pointer passed to one of these function it is important to be
caught. Compiler's instrumentation cannot do this since these functions
are written in assembly.
KASan replaces memory functions with manually instrumented variants.
Original functions declared as weak symbols so strong definitions in
mm/kasan/kasan.c could replace them. Original functions have aliases
with '__' prefix in names, so we could call non-instrumented variant
if needed.
Signed-off-by: Qing Zhang <zhangqing@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Qing Zhang [Wed, 6 Sep 2023 14:54:16 +0000 (22:54 +0800)]
LoongArch: Simplify the processing of jumping new kernel for KASLR
Modified relocate_kernel() doesn't return new kernel's entry point but
the random_offset. In this way we share the start_kernel() processing
with the normal kernel, which avoids calling 'jr a0' directly and allows
some other operations (e.g, kasan_early_init) before start_kernel() when
KASLR (CONFIG_RANDOMIZE_BASE) is turned on.
Signed-off-by: Qing Zhang <zhangqing@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Qing Zhang [Wed, 6 Sep 2023 14:54:16 +0000 (22:54 +0800)]
kasan: Add (pmd|pud)_init for LoongArch zero_(pud|p4d)_populate process
LoongArch populates pmd/pud with invalid_pmd_table/invalid_pud_table in
pagetable_init, So pmd_init/pud_init(p) is required, define them as __weak
in mm/kasan/init.c, like mm/sparse-vmemmap.c.
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Signed-off-by: Qing Zhang <zhangqing@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Qing Zhang [Wed, 6 Sep 2023 14:54:16 +0000 (22:54 +0800)]
kasan: Add __HAVE_ARCH_SHADOW_MAP to support arch specific mapping
MIPS, LoongArch and some other architectures have many holes between
different segments and the valid address space (256T available) is
insufficient to map all these segments to kasan shadow memory with the
common formula provided by kasan core. So we need architecture specific
mapping formulas to ensure different segments are mapped individually,
and only limited space lengths of those specific segments are mapped to
shadow.
Therefore, when the incoming address is converted to a shadow, we need
to add a condition to determine whether it is valid.
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Signed-off-by: Qing Zhang <zhangqing@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Enze Li [Wed, 6 Sep 2023 14:54:16 +0000 (22:54 +0800)]
LoongArch: Add KFENCE (Kernel Electric-Fence) support
The LoongArch architecture is quite different from other architectures.
When the allocating of KFENCE itself is done, it is mapped to the direct
mapping configuration window [1] by default on LoongArch. It means that
it is not possible to use the page table mapped mode which required by
the KFENCE system and therefore it should be remapped to the appropriate
region.
This patch adds architecture specific implementation details for KFENCE.
In particular, this implements the required interface in <asm/kfence.h>.
Tested this patch by running the testcases and all passed.
[1] https://loongson.github.io/LoongArch-Documentation/LoongArch-Vol1-EN.html#virtual-address-space-and-address-translation-mode
Signed-off-by: Enze Li <lienze@kylinos.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Enze Li [Wed, 6 Sep 2023 14:54:16 +0000 (22:54 +0800)]
LoongArch: Get partial stack information when providing regs parameter
Currently, arch_stack_walk() can only get the full stack information
including NMI. This is because the implementation of arch_stack_walk()
is forced to ignore the information passed by the regs parameter and use
the current stack information instead.
For some detection systems like KFENCE, only partial stack information
is needed. In particular, the stack frame where the interrupt occurred.
To support KFENCE, this patch modifies the implementation of the
arch_stack_walk() function so that if this function is called with the
regs argument passed, it retains all the stack information in regs and
uses it to provide accurate information.
Before this patch:
[ 1.531195 ] ==================================================================
[ 1.531442 ] BUG: KFENCE: out-of-bounds read in stack_trace_save_regs+0x48/0x6c
[ 1.531442 ]
[ 1.531900 ] Out-of-bounds read at 0xffff800012267fff (1B left of kfence-#12):
[ 1.532046 ] stack_trace_save_regs+0x48/0x6c
[ 1.532169 ] kfence_report_error+0xa4/0x528
[ 1.532276 ] kfence_handle_page_fault+0x124/0x270
[ 1.532388 ] no_context+0x50/0x94
[ 1.532453 ] do_page_fault+0x1a8/0x36c
[ 1.532524 ] tlb_do_page_fault_0+0x118/0x1b4
[ 1.532623 ] test_out_of_bounds_read+0xa0/0x1d8
[ 1.532745 ] kunit_generic_run_threadfn_adapter+0x1c/0x28
[ 1.532854 ] kthread+0x124/0x130
[ 1.532922 ] ret_from_kernel_thread+0xc/0xa4
<snip>
After this patch:
[ 1.320220 ] ==================================================================
[ 1.320401 ] BUG: KFENCE: out-of-bounds read in test_out_of_bounds_read+0xa8/0x1d8
[ 1.320401 ]
[ 1.320898 ] Out-of-bounds read at 0xffff800012257fff (1B left of kfence-#10):
[ 1.321134 ] test_out_of_bounds_read+0xa8/0x1d8
[ 1.321264 ] kunit_generic_run_threadfn_adapter+0x1c/0x28
[ 1.321392 ] kthread+0x124/0x130
[ 1.321459 ] ret_from_kernel_thread+0xc/0xa4
<snip>
Suggested-by: Jinyang He <hejinyang@loongson.cn>
Signed-off-by: Enze Li <lienze@kylinos.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Enze Li [Wed, 6 Sep 2023 14:53:55 +0000 (22:53 +0800)]
LoongArch: mm: Add page table mapped mode support for virt_to_page()
According to LoongArch documentations, there are two types of address
translation modes: direct mapped address translation mode (DMW mode) and
page table mapped address translation mode (TLB mode).
Currently, virt_to_page() only supports direct mapped mode. This patch
determines which mode is used, and adds corresponding handling functions
for both modes.
For more details on the two modes, see [1].
[1] https://loongson.github.io/LoongArch-Documentation/LoongArch-Vol1-EN.html#virtual-address-space-and-address-translation-mode
Signed-off-by: Enze Li <lienze@kylinos.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Enze Li [Wed, 6 Sep 2023 14:53:55 +0000 (22:53 +0800)]
kfence: Defer the assignment of the local variable addr
The LoongArch architecture is different from other architectures. It
needs to update __kfence_pool during arch_kfence_init_pool().
This patch modifies the assignment location of the local variable addr
in the kfence_init_pool() function to support the case of updating
__kfence_pool in arch_kfence_init_pool().
Acked-by: Marco Elver <elver@google.com>
Signed-off-by: Enze Li <lienze@kylinos.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Feiyang Chen [Wed, 6 Sep 2023 14:53:55 +0000 (22:53 +0800)]
LoongArch: Allow building with kcov coverage
Add ARCH_HAS_KCOV and HAVE_GCC_PLUGINS to the LoongArch Kconfig. And
also disable instrumentation of vdso.
Signed-off-by: Feiyang Chen <chenfeiyang@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Feiyang Chen [Wed, 6 Sep 2023 14:53:55 +0000 (22:53 +0800)]
LoongArch: Provide kaslr_offset() to get kernel offset
Provide kaslr_offset() to get the kernel offset when KASLR is enabled.
Signed-off-by: Feiyang Chen <chenfeiyang@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Qing Zhang [Wed, 6 Sep 2023 14:53:55 +0000 (22:53 +0800)]
LoongArch: Add basic KGDB & KDB support
KGDB is intended to be used as a source level debugger for the Linux
kernel. It is used along with gdb to debug a Linux kernel. GDB can be
used to "break in" to the kernel to inspect memory, variables and regs
similar to the way an application developer would use GDB to debug an
application. KDB is a frontend of KGDB which is similar to GDB.
By now, in addition to the generic KGDB features, the LoongArch KGDB
implements the following features:
- Hardware breakpoints/watchpoints;
- Software single-step support for KDB.
Signed-off-by: Qing Zhang <zhangqing@loongson.cn> # Framework & CoreFeature
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn> # BreakPoint & SingleStep
Signed-off-by: Hui Li <lihui@loongson.cn> # Some Minor Improvements
Signed-off-by: Randy Dunlap <rdunlap@infradead.org> # Some Build Error Fixes
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Qi Hu [Wed, 6 Sep 2023 14:53:55 +0000 (22:53 +0800)]
LoongArch: Add Loongson Binary Translation (LBT) extension support
Loongson Binary Translation (LBT) is used to accelerate binary translation,
which contains 4 scratch registers (scr0 to scr3), x86/ARM eflags (eflags)
and x87 fpu stack pointer (ftop).
This patch support kernel to save/restore these registers, handle the LBT
exception and maintain sigcontext.
Signed-off-by: Qi Hu <huqi@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
WANG Xuerui [Wed, 6 Sep 2023 14:53:55 +0000 (22:53 +0800)]
raid6: Add LoongArch SIMD recovery implementation
Similar to the syndrome calculation, the recovery algorithms also work
on 64 bytes at a time to align with the L1 cache line size of current
and future LoongArch cores (that we care about). Which means
unrolled-by-4 LSX and unrolled-by-2 LASX code.
The assembly is originally based on the x86 SSSE3/AVX2 ports, but
register allocation has been redone to take advantage of LSX/LASX's 32
vector registers, and instruction sequence has been optimized to suit
(e.g. LoongArch can perform per-byte srl and andi on vectors, but x86
cannot).
Performance numbers measured by instrumenting the raid6test code, on a
3A5000 system clocked at 2.5GHz:
> lasx 2data: 354.987 MiB/s
> lasx datap: 350.430 MiB/s
> lsx 2data: 340.026 MiB/s
> lsx datap: 337.318 MiB/s
> intx1 2data: 164.280 MiB/s
> intx1 datap: 187.966 MiB/s
Because recovery algorithms are chosen solely based on priority and
availability, lasx is marked as priority 2 and lsx priority 1. At least
for the current generation of LoongArch micro-architectures, LASX should
always be faster than LSX whenever supported, and have similar power
consumption characteristics (because the only known LASX-capable uarch,
the LA464, always compute the full 256-bit result for vector ops).
Acked-by: Song Liu <song@kernel.org>
Signed-off-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
WANG Xuerui [Wed, 6 Sep 2023 14:53:55 +0000 (22:53 +0800)]
raid6: Add LoongArch SIMD syndrome calculation
The algorithms work on 64 bytes at a time, which is the L1 cache line
size of all current and future LoongArch cores (that we care about), as
confirmed by Huacai. The code is based on the generic int.uc algorithm,
unrolled 4 times for LSX and 2 times for LASX. Further unrolling does
not meaningfully improve the performance according to experiments.
Performance numbers measured during system boot on a 3A5000 @ 2.5GHz:
> raid6: lasx gen() 12726 MB/s
> raid6: lsx gen() 10001 MB/s
> raid6: int64x8 gen() 2876 MB/s
> raid6: int64x4 gen() 3867 MB/s
> raid6: int64x2 gen() 2531 MB/s
> raid6: int64x1 gen() 1945 MB/s
Comparison of xor() speeds (from different boots but meaningful anyway):
> lasx: 11226 MB/s
> lsx: 6395 MB/s
> int64x4: 2147 MB/s
Performance as measured by raid6test:
> raid6: lasx gen() 25109 MB/s
> raid6: lsx gen() 13233 MB/s
> raid6: int64x8 gen() 4164 MB/s
> raid6: int64x4 gen() 6005 MB/s
> raid6: int64x2 gen() 5781 MB/s
> raid6: int64x1 gen() 4119 MB/s
> raid6: using algorithm lasx gen() 25109 MB/s
> raid6: .... xor() 14439 MB/s, rmw enabled
Acked-by: Song Liu <song@kernel.org>
Signed-off-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
WANG Xuerui [Wed, 6 Sep 2023 14:53:55 +0000 (22:53 +0800)]
LoongArch: Add SIMD-optimized XOR routines
Add LSX and LASX implementations of xor operations, operating on 64
bytes (one L1 cache line) at a time, for a balance between memory
utilization and instruction mix. Huacai confirmed that all future
LoongArch implementations by Loongson (that we care) will likely also
feature 64-byte cache lines, and experiments show no throughput
improvement with further unrolling.
Performance numbers measured during system boot on a 3A5000 @ 2.5GHz:
> 8regs : 12702 MB/sec
> 8regs_prefetch : 10920 MB/sec
> 32regs : 12686 MB/sec
> 32regs_prefetch : 10918 MB/sec
> lsx : 17589 MB/sec
> lasx : 26116 MB/sec
Acked-by: Song Liu <song@kernel.org>
Signed-off-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Huacai Chen [Wed, 6 Sep 2023 14:53:55 +0000 (22:53 +0800)]
LoongArch: Allow usage of LSX/LASX in the kernel
Allow usage of LSX/LASX in the kernel by extending kernel_fpu_begin()
and kernel_fpu_end().
Reviewed-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Tiezhu Yang [Wed, 6 Sep 2023 14:53:10 +0000 (22:53 +0800)]
LoongArch: Define symbol 'fault' as a local label in fpu.S
The initial aim is to silence the following objtool warnings:
arch/loongarch/kernel/fpu.o: warning: objtool: _save_fp_context() falls through to next function fault()
arch/loongarch/kernel/fpu.o: warning: objtool: _restore_fp_context() falls through to next function fault()
arch/loongarch/kernel/fpu.o: warning: objtool: _save_lsx_context() falls through to next function fault()
arch/loongarch/kernel/fpu.o: warning: objtool: _restore_lsx_context() falls through to next function fault()
arch/loongarch/kernel/fpu.o: warning: objtool: _save_lasx_context() falls through to next function fault()
arch/loongarch/kernel/fpu.o: warning: objtool: _restore_lasx_context() falls through to next function fault()
Currently, SYM_FUNC_START()/SYM_FUNC_END() defines the symbol 'fault' as
SYM_T_FUNC which is STT_FUNC, the objtool warnings are generated through
the following code:
tools/objtool/include/objtool/check.h:
static inline struct symbol *insn_func(struct instruction *insn)
{
struct symbol *sym = insn->sym;
if (sym && sym->type != STT_FUNC)
sym = NULL;
return sym;
}
tools/objtool/check.c:
static int validate_branch(struct objtool_file *file, struct symbol *func,
struct instruction *insn, struct insn_state state)
{
...
if (func && insn_func(insn) && func != insn_func(insn)->pfunc) {
...
WARN("%s() falls through to next function %s()",
func->name, insn_func(insn)->name);
return 1;
}
...
}
We can see that the fixup can be a local label in the following code:
arch/loongarch/include/asm/asm-extable.h:
.pushsection __ex_table, "a"; \
.balign 4; \
.long ((insn) - .); \
.long ((fixup) - .); \
.short (type); \
.short (data); \
.popsection;
.macro _asm_extable, insn, fixup
__ASM_EXTABLE_RAW(\insn, \fixup, EX_TYPE_FIXUP, 0)
.endm
Like arch/loongarch/lib/*.S, just define the symbol 'fault' as a local
label in fpu.S.
Before:
$ readelf -s arch/loongarch/kernel/fpu.o | awk -F: /fault/'{print $2}'
000000000000053c 8 FUNC GLOBAL DEFAULT 1 fault
After:
$ readelf -s arch/loongarch/kernel/fpu.o | awk -F: /fault/'{print $2}'
000000000000053c 0 NOTYPE LOCAL DEFAULT 1 .L_fpu_fault
Co-developed-by: Youling Tang <tangyouling@loongson.cn>
Signed-off-by: Youling Tang <tangyouling@loongson.cn>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Weihao Li [Wed, 6 Sep 2023 14:53:10 +0000 (22:53 +0800)]
LoongArch: Adjust {copy, clear}_user exception handler behavior
The {copy, clear}_user function should returns number of bytes that
could not be {copied, cleared}. So, try to {copy, clear} byte by byte
when ld.{d,w,h} and st.{d,w,h} trapped into an exception.
Reviewed-by: WANG Rui <wangrui@loongson.cn>
Signed-off-by: Weihao Li <liweihao@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Bibo Mao [Wed, 6 Sep 2023 14:53:10 +0000 (22:53 +0800)]
LoongArch: Use static defined zero page rather than allocated
On LoongArch system, there is only one page needed for zero page (no
cache synonyms), and there is no COLOR_ZERO_PAGE, so zero_page_mask is
useless and the macro __HAVE_COLOR_ZERO_PAGE is not necessary.
Like other popular architectures, It is simpler to define the zero page
in kernel BSS code segment rather than dynamically allocate.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Bibo Mao [Wed, 6 Sep 2023 14:53:09 +0000 (22:53 +0800)]
LoongArch: mm: Introduce unified function populate_kernel_pte()
Function pcpu_populate_pte() and fixmap_pte() are similar, they populate
one page from kernel address space. And there is confusion between pgd
and p4d in the function fixmap_pte(), such as pgd_none() always returns
zero. This patch introduces a unified function populate_kernel_pte() and
then replaces pcpu_populate_pte() and fixmap_pte().
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Bibo Mao [Wed, 6 Sep 2023 14:53:09 +0000 (22:53 +0800)]
LoongArch: Code improvements in function pcpu_populate_pte()
Do some code improvements in function pcpu_populate_pte():
1. Add memory allocation failure handling;
2. Replace pgd_populate() with p4d_populate(), it will be useful if
there are four-level page tables.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Huacai Chen [Wed, 6 Sep 2023 14:53:09 +0000 (22:53 +0800)]
LoongArch: Remove shm_align_mask and use SHMLBA instead
Both shm_align_mask and SHMLBA want to avoid cache alias. But they are
inconsistent: shm_align_mask is (PAGE_SIZE - 1) while SHMLBA is SZ_64K,
but PAGE_SIZE is not always equal to SZ_64K.
This may cause problems when shmat() twice. Fix this problem by removing
shm_align_mask and using SHMLBA (strictly SHMLBA - 1) instead.
Reported-by: Jiantao Shan <shanjiantao@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Hongchen Zhang [Wed, 6 Sep 2023 14:53:09 +0000 (22:53 +0800)]
LoongArch: mm: Add p?d_leaf() definitions
When I do LTP test, LTP test case ksm06 caused panic at
break_ksm_pmd_entry
-> pmd_leaf (Huge page table but False)
-> pte_present (panic)
The reason is pmd_leaf() is not defined, So like commit
501b81046701
("mips: mm: add p?d_leaf() definitions") add p?d_leaf() definition for
LoongArch.
Fixes:
09cfefb7fa70 ("LoongArch: Add memory management")
Cc: stable@vger.kernel.org
Acked-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Hongchen Zhang <zhanghongchen@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Nathan Chancellor [Wed, 6 Sep 2023 14:53:09 +0000 (22:53 +0800)]
LoongArch: Drop unused parse_r and parse_v macros
When building with CONFIG_LTO_CLANG_FULL, there are several errors due
to the way that parse_r is defined with an __asm__ statement in a
header:
ld.lld: error: ld-temp.o <inline asm>:105:1: macro 'parse_r' is already defined
.macro parse_r var r
^
This was an issue for arch/mips as well, which was resolved by commit
67512a8cf5a7 ("MIPS: Avoid macro redefinitions").
However, parse_r is unused in arch/loongarch after commit
83d8b38967d2
("LoongArch: Simplify the invtlb wrappers"), so doing the same change
does not make much sense now. Just remove parse_r (and parse_v, which
is also unused) to resolve the redefinition error. If it needs to be
brought back due to an actual use, it should be brought back with the
same changes as the aforementioned arch/mips commit.
Closes: https://github.com/ClangBuiltLinux/linux/issues/1924
Reviewed-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Christoph Böhmwalder [Wed, 6 Sep 2023 13:30:34 +0000 (15:30 +0200)]
drbd: swap bvec_set_page len and offset
bvec_set_page has the following signature:
static inline void bvec_set_page(struct bio_vec *bv, struct page *page,
unsigned int len, unsigned int offset)
However, the usage in DRBD swaps the len and offset parameters. This
leads to a bvec with length=0 instead of the intended length=4096, which
causes sock_sendmsg to return -EIO.
This leaves DRBD unable to transmit any pages and thus completely
broken.
Swapping the parameters fixes the regression.
Fixes:
eeac7405c735 ("drbd: Use sendmsg(MSG_SPLICE_PAGES) rather than sendpage()")
Reported-by: Serguei Ivantsov <manowar@gsc-game.com>
Link: https://lore.kernel.org/regressions/CAKH+VT3YLmAn0Y8=q37UTDShqxDLsqPcQ4hBMzY7HPn7zNx+RQ@mail.gmail.com/
Cc: stable@vger.kernel.org
Signed-off-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com>
Link: https://lore.kernel.org/r/20230906133034.948817-1-christoph.boehmwalder@linbit.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Christoph Hellwig [Tue, 5 Sep 2023 12:47:31 +0000 (14:47 +0200)]
block: fix pin count management when merging same-page segments
There is no need to unpin the added page when adding it to the bio fails
as that is done by the loop below. Instead we want to unpin it when adding
a single page to the bio more than once as bio_release_pages will only
unpin it once.
Fixes:
d1916c86ccdc ("block: move same page handling from __bio_add_pc_page to the callers")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230905124731.328255-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Puranjay Mohan [Thu, 31 Aug 2023 13:12:29 +0000 (13:12 +0000)]
bpf, riscv: use prog pack allocator in the BPF JIT
Use bpf_jit_binary_pack_alloc() for memory management of JIT binaries in
RISCV BPF JIT. The bpf_jit_binary_pack_alloc creates a pair of RW and RX
buffers. The JIT writes the program into the RW buffer. When the JIT is
done, the program is copied to the final RX buffer with
bpf_jit_binary_pack_finalize.
Implement bpf_arch_text_copy() and bpf_arch_text_invalidate() for RISCV
JIT as these functions are required by bpf_jit_binary_pack allocator.
Signed-off-by: Puranjay Mohan <puranjay12@gmail.com>
Reviewed-by: Song Liu <song@kernel.org>
Reviewed-by: Pu Lehui <pulehui@huawei.com>
Acked-by: Björn Töpel <bjorn@kernel.org>
Tested-by: Björn Töpel <bjorn@rivosinc.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/20230831131229.497941-5-puranjay12@gmail.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Puranjay Mohan [Thu, 31 Aug 2023 13:12:28 +0000 (13:12 +0000)]
riscv: implement a memset like function for text
The BPF JIT needs to write invalid instructions to RX regions of memory to
invalidate removed BPF programs. This needs a function like memset() that
can work with RX memory.
Implement patch_text_set_nosync() which is similar to text_poke_set() of
x86.
Signed-off-by: Puranjay Mohan <puranjay12@gmail.com>
Reviewed-by: Pu Lehui <pulehui@huawei.com>
Acked-by: Björn Töpel <bjorn@kernel.org>
Tested-by: Björn Töpel <bjorn@rivosinc.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/20230831131229.497941-4-puranjay12@gmail.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Puranjay Mohan [Thu, 31 Aug 2023 13:12:27 +0000 (13:12 +0000)]
riscv: extend patch_text_nosync() for multiple pages
The patch_insn_write() function currently doesn't work for multiple pages
of instructions, therefore patch_text_nosync() will fail with a page fault
if called with lengths spanning multiple pages.
This commit extends the patch_insn_write() function to support multiple
pages by copying at max 2 pages at a time in a loop. This implementation
is similar to text_poke_copy() function of x86.
Signed-off-by: Puranjay Mohan <puranjay12@gmail.com>
Reviewed-by: Pu Lehui <pulehui@huawei.com>
Reviewed-by: Björn Töpel <bjorn@rivosinc.com>
Tested-by: Björn Töpel <bjorn@rivosinc.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/20230831131229.497941-3-puranjay12@gmail.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Puranjay Mohan [Thu, 31 Aug 2023 13:12:26 +0000 (13:12 +0000)]
bpf: make bpf_prog_pack allocator portable
The bpf_prog_pack allocator currently uses module_alloc() and
module_memfree() to allocate and free memory. This is not portable
because different architectures use different methods for allocating
memory for BPF programs. Like ARM64 and riscv use vmalloc()/vfree().
Use bpf_jit_alloc_exec() and bpf_jit_free_exec() for memory management
in bpf_prog_pack allocator. Other architectures can override these with
their implementation and will be able to use bpf_prog_pack directly.
On architectures that don't override bpf_jit_alloc/free_exec() this is
basically a NOP.
Signed-off-by: Puranjay Mohan <puranjay12@gmail.com>
Acked-by: Song Liu <song@kernel.org>
Acked-by: Björn Töpel <bjorn@kernel.org>
Tested-by: Björn Töpel <bjorn@rivosinc.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/20230831131229.497941-2-puranjay12@gmail.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Martin KaFai Lau [Fri, 1 Sep 2023 23:11:29 +0000 (16:11 -0700)]
selftests/bpf: Check bpf_sk_storage has uncharged sk_omem_alloc
This patch checks the sk_omem_alloc has been uncharged by bpf_sk_storage
during the __sk_destruct.
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230901231129.578493-4-martin.lau@linux.dev
Martin KaFai Lau [Fri, 1 Sep 2023 23:11:28 +0000 (16:11 -0700)]
bpf: bpf_sk_storage: Fix the missing uncharge in sk_omem_alloc
The commit
c83597fa5dc6 ("bpf: Refactor some inode/task/sk storage functions
for reuse"), refactored the bpf_{sk,task,inode}_storage_free() into
bpf_local_storage_unlink_nolock() which then later renamed to
bpf_local_storage_destroy(). The commit accidentally passed the
"bool uncharge_mem = false" argument to bpf_selem_unlink_storage_nolock()
which then stopped the uncharge from happening to the sk->sk_omem_alloc.
This missing uncharge only happens when the sk is going away (during
__sk_destruct).
This patch fixes it by always passing "uncharge_mem = true". It is a
noop to the task/inode/cgroup storage because they do not have the
map_local_storage_(un)charge enabled in the map_ops. A followup patch
will be done in bpf-next to remove the uncharge_mem argument.
A selftest is added in the next patch.
Fixes:
c83597fa5dc6 ("bpf: Refactor some inode/task/sk storage functions for reuse")
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230901231129.578493-3-martin.lau@linux.dev
Martin KaFai Lau [Fri, 1 Sep 2023 23:11:27 +0000 (16:11 -0700)]
bpf: bpf_sk_storage: Fix invalid wait context lockdep report
'./test_progs -t test_local_storage' reported a splat:
[ 27.137569] =============================
[ 27.138122] [ BUG: Invalid wait context ]
[ 27.138650] 6.5.0-03980-gd11ae1b16b0a #247 Tainted: G O
[ 27.139542] -----------------------------
[ 27.140106] test_progs/1729 is trying to lock:
[ 27.140713]
ffff8883ef047b88 (stock_lock){-.-.}-{3:3}, at: local_lock_acquire+0x9/0x130
[ 27.141834] other info that might help us debug this:
[ 27.142437] context-{5:5}
[ 27.142856] 2 locks held by test_progs/1729:
[ 27.143352] #0:
ffffffff84bcd9c0 (rcu_read_lock){....}-{1:3}, at: rcu_lock_acquire+0x4/0x40
[ 27.144492] #1:
ffff888107deb2c0 (&storage->lock){..-.}-{2:2}, at: bpf_local_storage_update+0x39e/0x8e0
[ 27.145855] stack backtrace:
[ 27.146274] CPU: 0 PID: 1729 Comm: test_progs Tainted: G O 6.5.0-03980-gd11ae1b16b0a #247
[ 27.147550] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014
[ 27.149127] Call Trace:
[ 27.149490] <TASK>
[ 27.149867] dump_stack_lvl+0x130/0x1d0
[ 27.152609] dump_stack+0x14/0x20
[ 27.153131] __lock_acquire+0x1657/0x2220
[ 27.153677] lock_acquire+0x1b8/0x510
[ 27.157908] local_lock_acquire+0x29/0x130
[ 27.159048] obj_cgroup_charge+0xf4/0x3c0
[ 27.160794] slab_pre_alloc_hook+0x28e/0x2b0
[ 27.161931] __kmem_cache_alloc_node+0x51/0x210
[ 27.163557] __kmalloc+0xaa/0x210
[ 27.164593] bpf_map_kzalloc+0xbc/0x170
[ 27.165147] bpf_selem_alloc+0x130/0x510
[ 27.166295] bpf_local_storage_update+0x5aa/0x8e0
[ 27.167042] bpf_fd_sk_storage_update_elem+0xdb/0x1a0
[ 27.169199] bpf_map_update_value+0x415/0x4f0
[ 27.169871] map_update_elem+0x413/0x550
[ 27.170330] __sys_bpf+0x5e9/0x640
[ 27.174065] __x64_sys_bpf+0x80/0x90
[ 27.174568] do_syscall_64+0x48/0xa0
[ 27.175201] entry_SYSCALL_64_after_hwframe+0x6e/0xd8
[ 27.175932] RIP: 0033:0x7effb40e41ad
[ 27.176357] Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d8
[ 27.179028] RSP: 002b:
00007ffe64c21fc8 EFLAGS:
00000202 ORIG_RAX:
0000000000000141
[ 27.180088] RAX:
ffffffffffffffda RBX:
00007ffe64c22768 RCX:
00007effb40e41ad
[ 27.181082] RDX:
0000000000000020 RSI:
00007ffe64c22008 RDI:
0000000000000002
[ 27.182030] RBP:
00007ffe64c21ff0 R08:
0000000000000000 R09:
00007ffe64c22788
[ 27.183038] R10:
0000000000000064 R11:
0000000000000202 R12:
0000000000000000
[ 27.184006] R13:
00007ffe64c22788 R14:
00007effb42a1000 R15:
0000000000000000
[ 27.184958] </TASK>
It complains about acquiring a local_lock while holding a raw_spin_lock.
It means it should not allocate memory while holding a raw_spin_lock
since it is not safe for RT.
raw_spin_lock is needed because bpf_local_storage supports tracing
context. In particular for task local storage, it is easy to
get a "current" task PTR_TO_BTF_ID in tracing bpf prog.
However, task (and cgroup) local storage has already been moved to
bpf mem allocator which can be used after raw_spin_lock.
The splat is for the sk storage. For sk (and inode) storage,
it has not been moved to bpf mem allocator. Using raw_spin_lock or not,
kzalloc(GFP_ATOMIC) could theoretically be unsafe in tracing context.
However, the local storage helper requires a verifier accepted
sk pointer (PTR_TO_BTF_ID), it is hypothetical if that (mean running
a bpf prog in a kzalloc unsafe context and also able to hold a verifier
accepted sk pointer) could happen.
This patch avoids kzalloc after raw_spin_lock to silent the splat.
There is an existing kzalloc before the raw_spin_lock. At that point,
a kzalloc is very likely required because a lookup has just been done
before. Thus, this patch always does the kzalloc before acquiring
the raw_spin_lock and remove the later kzalloc usage after the
raw_spin_lock. After this change, it will have a charge and then
uncharge during the syscall bpf_map_update_elem() code path.
This patch opts for simplicity and not continue the old
optimization to save one charge and uncharge.
This issue is dated back to the very first commit of bpf_sk_storage
which had been refactored multiple times to create task, inode, and
cgroup storage. This patch uses a Fixes tag with a more recent
commit that should be easier to do backport.
Fixes:
b00fa38a9c1c ("bpf: Enable non-atomic allocations in local storage")
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230901231129.578493-2-martin.lau@linux.dev
Ilya Leoshkevich [Wed, 6 Sep 2023 00:44:19 +0000 (02:44 +0200)]
s390/bpf: Pass through tail call counter in trampolines
s390x eBPF programs use the following extension to the s390x calling
convention: tail call counter is passed on stack at offset
STK_OFF_TCCNT, which callees otherwise use as scratch space.
Currently trampoline does not respect this and clobbers tail call
counter. This breaks enforcing tail call limits in eBPF programs, which
have trampolines attached to them.
Fix by forwarding a copy of the tail call counter to the original eBPF
program in the trampoline (for fexit), and by restoring it at the end
of the trampoline (for fentry).
Fixes:
528eb2cb87bc ("s390/bpf: Implement arch_prepare_bpf_trampoline()")
Reported-by: Leon Hwang <hffilwlqm@gmail.com>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230906004448.111674-1-iii@linux.ibm.com
Sebastian Andrzej Siewior [Wed, 30 Aug 2023 08:04:05 +0000 (10:04 +0200)]
bpf: Assign bpf_tramp_run_ctx::saved_run_ctx before recursion check.
__bpf_prog_enter_recur() assigns bpf_tramp_run_ctx::saved_run_ctx before
performing the recursion check which means in case of a recursion
__bpf_prog_exit_recur() uses the previously set bpf_tramp_run_ctx::saved_run_ctx
value.
__bpf_prog_enter_sleepable_recur() assigns bpf_tramp_run_ctx::saved_run_ctx
after the recursion check which means in case of a recursion
__bpf_prog_exit_sleepable_recur() uses an uninitialized value. This does not
look right. If I read the entry trampoline code right, then bpf_tramp_run_ctx
isn't initialized upfront.
Align __bpf_prog_enter_sleepable_recur() with __bpf_prog_enter_recur() and
set bpf_tramp_run_ctx::saved_run_ctx before the recursion check is made.
Remove the assignment of saved_run_ctx in kern_sys_bpf() since it happens
a few cycles later.
Fixes:
e384c7b7b46d0 ("bpf, x86: Create bpf_tramp_run_ctx on the caller thread's stack")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20230830080405.251926-3-bigeasy@linutronix.de
Sebastian Andrzej Siewior [Wed, 30 Aug 2023 08:04:04 +0000 (10:04 +0200)]
bpf: Invoke __bpf_prog_exit_sleepable_recur() on recursion in kern_sys_bpf().
If __bpf_prog_enter_sleepable_recur() detects recursion then it returns
0 without undoing rcu_read_lock_trace(), migrate_disable() or
decrementing the recursion counter. This is fine in the JIT case because
the JIT code will jump in the 0 case to the end and invoke the matching
exit trampoline (__bpf_prog_exit_sleepable_recur()).
This is not the case in kern_sys_bpf() which returns directly to the
caller with an error code.
Add __bpf_prog_exit_sleepable_recur() as clean up in the recursion case.
Fixes:
b1d18a7574d0d ("bpf: Extend sys_bpf commands for bpf_syscall programs.")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20230830080405.251926-2-bigeasy@linutronix.de
Jakub Kicinski [Tue, 5 Sep 2023 23:42:02 +0000 (16:42 -0700)]
net: phylink: fix sphinx complaint about invalid literal
sphinx complains about the use of "%PHYLINK_PCS_NEG_*":
Documentation/networking/kapi:144: ./include/linux/phylink.h:601: WARNING: Inline literal start-string without end-string.
Documentation/networking/kapi:144: ./include/linux/phylink.h:633: WARNING: Inline literal start-string without end-string.
These are not valid symbols so drop the '%' prefix.
Alternatively we could use %PHYLINK_PCS_NEG_\* (escape the *)
or use normal literal ``PHYLINK_PCS_NEG_*`` but there is already
a handful of un-adorned DEFINE_* in this file.
Fixes:
f99d471afa03 ("net: phylink: add PCS negotiation mode")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Link: https://lore.kernel.org/all/20230626162908.2f149f98@canb.auug.org.au/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 6 Sep 2023 05:23:05 +0000 (06:23 +0100)]
Merge branch 'sja1105-fixes'
Vladimir Oltean says:
====================
tc-cbs offload fixes for SJA1105 DSA
Yanan Yang has pointed out to me that certain tc-cbs offloaded
configurations do not appear to do any shaping on the LS1021A-TSN board
(SJA1105T).
This is due to an apparent documentation error that also made its way
into the driver, which patch 1/3 now fixes.
While investigating and then testing, I've found 2 more bugs, which are
patches 2/3 and 3/3.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Tue, 5 Sep 2023 21:53:38 +0000 (00:53 +0300)]
net: dsa: sja1105: complete tc-cbs offload support on SJA1110
The blamed commit left this delta behind:
struct sja1105_cbs_entry {
- u64 port;
- u64 prio;
+ u64 port; /* Not used for SJA1110 */
+ u64 prio; /* Not used for SJA1110 */
u64 credit_hi;
u64 credit_lo;
u64 send_slope;
u64 idle_slope;
};
but did not actually implement tc-cbs offload fully for the new switch.
The offload is accepted, but it doesn't work.
The difference compared to earlier switch generations is that now, the
table of CBS shapers is sparse, because there are many more shapers, so
the mapping between a {port, prio} and a table index is static, rather
than requiring us to store the port and prio into the sja1105_cbs_entry.
So, the problem is that the code programs the CBS shaper parameters at a
dynamic table index which is incorrect.
All that needs to be done for SJA1110 CBS shapers to work is to bypass
the logic which allocates shapers in a dense manner, as for SJA1105, and
use the fixed mapping instead.
Fixes:
3e77e59bf8cf ("net: dsa: sja1105: add support for the SJA1110 switch family")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Tue, 5 Sep 2023 21:53:37 +0000 (00:53 +0300)]
net: dsa: sja1105: fix -ENOSPC when replacing the same tc-cbs too many times
After running command [2] too many times in a row:
[1] $ tc qdisc add dev sw2p0 root handle 1: mqprio num_tc 8 \
map 0 1 2 3 4 5 6 7 queues 1@0 1@1 1@2 1@3 1@4 1@5 1@6 1@7 hw 0
[2] $ tc qdisc replace dev sw2p0 parent 1:1 cbs offload 1 \
idleslope 120000 sendslope -880000 locredit -1320 hicredit 180
(aka more than priv->info->num_cbs_shapers times)
we start seeing the following error message:
Error: Specified device failed to setup cbs hardware offload.
This comes from the fact that ndo_setup_tc(TC_SETUP_QDISC_CBS) presents
the same API for the qdisc create and replace cases, and the sja1105
driver fails to distinguish between the 2. Thus, it always thinks that
it must allocate the same shaper for a {port, queue} pair, when it may
instead have to replace an existing one.
Fixes:
4d7525085a9b ("net: dsa: sja1105: offload the Credit-Based Shaper qdisc")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Tue, 5 Sep 2023 21:53:36 +0000 (00:53 +0300)]
net: dsa: sja1105: fix bandwidth discrepancy between tc-cbs software and offload
More careful measurement of the tc-cbs bandwidth shows that the stream
bandwidth (effectively idleslope) increases, there is a larger and
larger discrepancy between the rate limit obtained by the software
Qdisc, and the rate limit obtained by its offloaded counterpart.
The discrepancy becomes so large, that e.g. at an idleslope of 40000
(40Mbps), the offloaded cbs does not actually rate limit anything, and
traffic will pass at line rate through a 100 Mbps port.
The reason for the discrepancy is that the hardware documentation I've
been following is incorrect. UM11040.pdf (for SJA1105P/Q/R/S) states
about IDLE_SLOPE that it is "the rate (in unit of bytes/sec) at which
the credit counter is increased".
Cross-checking with UM10944.pdf (for SJA1105E/T) and UM11107.pdf
(for SJA1110), the wording is different: "This field specifies the
value, in bytes per second times link speed, by which the credit counter
is increased".
So there's an extra scaling for link speed that the driver is currently
not accounting for, and apparently (empirically), that link speed is
expressed in Kbps.
I've pondered whether to pollute the sja1105_mac_link_up()
implementation with CBS shaper reprogramming, but I don't think it is
worth it. IMO, the UAPI exposed by tc-cbs requires user space to
recalculate the sendslope anyway, since the formula for that depends on
port_transmit_rate (see man tc-cbs), which is not an invariant from tc's
perspective.
So we use the offload->sendslope and offload->idleslope to deduce the
original port_transmit_rate from the CBS formula, and use that value to
scale the offload->sendslope and offload->idleslope to values that the
hardware understands.
Some numerical data points:
40Mbps stream, max interfering frame size 1500, port speed 100M
---------------------------------------------------------------
tc-cbs parameters:
idleslope 40000 sendslope -60000 locredit -900 hicredit 600
which result in hardware values:
Before (doesn't work) After (works)
credit_hi 600 600
credit_lo 900 900
send_slope 7500000 75
idle_slope 5000000 50
40Mbps stream, max interfering frame size 1500, port speed 1G
-------------------------------------------------------------
tc-cbs parameters:
idleslope 40000 sendslope -960000 locredit -1440 hicredit 60
which result in hardware values:
Before (doesn't work) After (works)
credit_hi 60 60
credit_lo 1440 1440
send_slope
120000000 120
idle_slope 5000000 5
5.12Mbps stream, max interfering frame size 1522, port speed 100M
-----------------------------------------------------------------
tc-cbs parameters:
idleslope 5120 sendslope -94880 locredit -1444 hicredit 77
which result in hardware values:
Before (doesn't work) After (works)
credit_hi 77 77
credit_lo 1444 1444
send_slope
11860000 118
idle_slope 640000 6
Tested on SJA1105T, SJA1105S and SJA1110A, at 1Gbps and 100Mbps.
Fixes:
4d7525085a9b ("net: dsa: sja1105: offload the Credit-Based Shaper qdisc")
Reported-by: Yanan Yang <yanan.yang@nxp.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 6 Sep 2023 05:20:33 +0000 (06:20 +0100)]
Merge branch '1GbE' of git://git./linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Change MIN_TXD and MIN_RXD to allow set rx/tx value between 64 and 80
Olga Zaborska says:
Change the minimum value of RX/TX descriptors to 64 to enable setting the rx/tx
value between 64 and 80. All igb, igbvf and igc devices can use as low as 64
descriptors.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Bodong Wang [Tue, 5 Sep 2023 17:48:46 +0000 (10:48 -0700)]
mlx5/core: E-Switch, Create ACL FT for eswitch manager in switchdev mode
ACL flow table is required in switchdev mode when metadata is enabled,
driver creates such table when loading each vport. However, not every
vport is loaded in switchdev mode. Such as ECPF if it's the eswitch manager.
In this case, ACL flow table is still needed.
To make it modularized, create ACL flow table for eswitch manager as
default and skip such operations when loading manager vport.
Also, there is no need to load the eswitch manager vport in switchdev mode.
This means there is no need to load it on regular connect-x HCAs where
the PF is the eswitch manager. This will avoid creating duplicate ACL
flow table for host PF vport.
Fixes:
29bcb6e4fe70 ("net/mlx5e: E-Switch, Use metadata for vport matching in send-to-vport rules")
Fixes:
eb8e9fae0a22 ("mlx5/core: E-Switch, Allocate ECPF vport if it's an eswitch manager")
Fixes:
5019833d661f ("net/mlx5: E-switch, Introduce helper function to enable/disable vports")
Signed-off-by: Bodong Wang <bodong@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jianbo Liu [Tue, 5 Sep 2023 17:48:45 +0000 (10:48 -0700)]
net/mlx5e: Clear mirred devices array if the rule is split
In the cited commit, the mirred devices are recorded and checked while
parsing the actions. In order to avoid system crash, the duplicate
action in a single rule is not allowed.
But the rule is actually break down into several FTEs in different
tables, for either mirroring, or the specified types of actions which
use post action infrastructure.
It will reject certain action list by mistake, for example:
actions:enp8s0f0_1,set(ipv4(ttl=63)),enp8s0f0_0,enp8s0f0_1.
Here the rule is split to two FTEs because of pedit action.
To fix this issue, when parsing the rule actions, reset if_count to
clear the mirred devices array if the rule is split to multiple
FTEs, and then the duplicate checking is restarted.
Fixes:
554fe75c1b3f ("net/mlx5e: Avoid duplicating rule destinations")
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Tue, 5 Sep 2023 13:40:46 +0000 (13:40 +0000)]
ip_tunnels: use DEV_STATS_INC()
syzbot/KCSAN reported data-races in iptunnel_xmit_stats() [1]
This can run from multiple cpus without mutual exclusion.
Adopt SMP safe DEV_STATS_INC() to update dev->stats fields.
[1]
BUG: KCSAN: data-race in iptunnel_xmit / iptunnel_xmit
read-write to 0xffff8881353df170 of 8 bytes by task 30263 on cpu 1:
iptunnel_xmit_stats include/net/ip_tunnels.h:493 [inline]
iptunnel_xmit+0x432/0x4a0 net/ipv4/ip_tunnel_core.c:87
ip_tunnel_xmit+0x1477/0x1750 net/ipv4/ip_tunnel.c:831
__gre_xmit net/ipv4/ip_gre.c:469 [inline]
ipgre_xmit+0x516/0x570 net/ipv4/ip_gre.c:662
__netdev_start_xmit include/linux/netdevice.h:4889 [inline]
netdev_start_xmit include/linux/netdevice.h:4903 [inline]
xmit_one net/core/dev.c:3544 [inline]
dev_hard_start_xmit+0x11b/0x3f0 net/core/dev.c:3560
__dev_queue_xmit+0xeee/0x1de0 net/core/dev.c:4340
dev_queue_xmit include/linux/netdevice.h:3082 [inline]
__bpf_tx_skb net/core/filter.c:2129 [inline]
__bpf_redirect_no_mac net/core/filter.c:2159 [inline]
__bpf_redirect+0x723/0x9c0 net/core/filter.c:2182
____bpf_clone_redirect net/core/filter.c:2453 [inline]
bpf_clone_redirect+0x16c/0x1d0 net/core/filter.c:2425
___bpf_prog_run+0xd7d/0x41e0 kernel/bpf/core.c:1954
__bpf_prog_run512+0x74/0xa0 kernel/bpf/core.c:2195
bpf_dispatcher_nop_func include/linux/bpf.h:1181 [inline]
__bpf_prog_run include/linux/filter.h:609 [inline]
bpf_prog_run include/linux/filter.h:616 [inline]
bpf_test_run+0x15d/0x3d0 net/bpf/test_run.c:423
bpf_prog_test_run_skb+0x77b/0xa00 net/bpf/test_run.c:1045
bpf_prog_test_run+0x265/0x3d0 kernel/bpf/syscall.c:3996
__sys_bpf+0x3af/0x780 kernel/bpf/syscall.c:5353
__do_sys_bpf kernel/bpf/syscall.c:5439 [inline]
__se_sys_bpf kernel/bpf/syscall.c:5437 [inline]
__x64_sys_bpf+0x43/0x50 kernel/bpf/syscall.c:5437
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
read-write to 0xffff8881353df170 of 8 bytes by task 30249 on cpu 0:
iptunnel_xmit_stats include/net/ip_tunnels.h:493 [inline]
iptunnel_xmit+0x432/0x4a0 net/ipv4/ip_tunnel_core.c:87
ip_tunnel_xmit+0x1477/0x1750 net/ipv4/ip_tunnel.c:831
__gre_xmit net/ipv4/ip_gre.c:469 [inline]
ipgre_xmit+0x516/0x570 net/ipv4/ip_gre.c:662
__netdev_start_xmit include/linux/netdevice.h:4889 [inline]
netdev_start_xmit include/linux/netdevice.h:4903 [inline]
xmit_one net/core/dev.c:3544 [inline]
dev_hard_start_xmit+0x11b/0x3f0 net/core/dev.c:3560
__dev_queue_xmit+0xeee/0x1de0 net/core/dev.c:4340
dev_queue_xmit include/linux/netdevice.h:3082 [inline]
__bpf_tx_skb net/core/filter.c:2129 [inline]
__bpf_redirect_no_mac net/core/filter.c:2159 [inline]
__bpf_redirect+0x723/0x9c0 net/core/filter.c:2182
____bpf_clone_redirect net/core/filter.c:2453 [inline]
bpf_clone_redirect+0x16c/0x1d0 net/core/filter.c:2425
___bpf_prog_run+0xd7d/0x41e0 kernel/bpf/core.c:1954
__bpf_prog_run512+0x74/0xa0 kernel/bpf/core.c:2195
bpf_dispatcher_nop_func include/linux/bpf.h:1181 [inline]
__bpf_prog_run include/linux/filter.h:609 [inline]
bpf_prog_run include/linux/filter.h:616 [inline]
bpf_test_run+0x15d/0x3d0 net/bpf/test_run.c:423
bpf_prog_test_run_skb+0x77b/0xa00 net/bpf/test_run.c:1045
bpf_prog_test_run+0x265/0x3d0 kernel/bpf/syscall.c:3996
__sys_bpf+0x3af/0x780 kernel/bpf/syscall.c:5353
__do_sys_bpf kernel/bpf/syscall.c:5439 [inline]
__se_sys_bpf kernel/bpf/syscall.c:5437 [inline]
__x64_sys_bpf+0x43/0x50 kernel/bpf/syscall.c:5437
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
value changed: 0x0000000000018830 -> 0x0000000000018831
Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 30249 Comm: syz-executor.4 Not tainted 6.5.0-syzkaller-11704-g3f86ed6ec0b3 #0
Fixes:
039f50629b7f ("ip_tunnel: Move stats update to iptunnel_xmit()")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Taehee Yoo [Tue, 5 Sep 2023 08:46:10 +0000 (08:46 +0000)]
net: team: do not use dynamic lockdep key
team interface has used a dynamic lockdep key to avoid false-positive
lockdep deadlock detection. Virtual interfaces such as team usually
have their own lock for protecting private data.
These interfaces can be nested.
team0
|
team1
Each interface's lock is actually different(team0->lock and team1->lock).
So,
mutex_lock(&team0->lock);
mutex_lock(&team1->lock);
mutex_unlock(&team1->lock);
mutex_unlock(&team0->lock);
The above case is absolutely safe. But lockdep warns about deadlock.
Because the lockdep understands these two locks are same. This is a
false-positive lockdep warning.
So, in order to avoid this problem, the team interfaces started to use
dynamic lockdep key. The false-positive problem was fixed, but it
introduced a new problem.
When the new team virtual interface is created, it registers a dynamic
lockdep key(creates dynamic lockdep key) and uses it. But there is the
limitation of the number of lockdep keys.
So, If so many team interfaces are created, it consumes all lockdep keys.
Then, the lockdep stops to work and warns about it.
In order to fix this problem, team interfaces use the subclass instead
of the dynamic key. So, when a new team interface is created, it doesn't
register(create) a new lockdep, but uses existed subclass key instead.
It is already used by the bonding interface for a similar case.
As the bonding interface does, the subclass variable is the same as
the 'dev->nested_level'. This variable indicates the depth in the stacked
interface graph.
The 'dev->nested_level' is protected by RTNL and RCU.
So, 'mutex_lock_nested()' for 'team->lock' requires RTNL or RCU.
In the current code, 'team->lock' is usually acquired under RTNL, there is
no problem with using 'dev->nested_level'.
The 'team_nl_team_get()' and The 'lb_stats_refresh()' functions acquire
'team->lock' without RTNL.
But these don't iterate their own ports nested so they don't need nested
lock.
Reproducer:
for i in {0..1000}
do
ip link add team$i type team
ip link add dummy$i master team$i type dummy
ip link set dummy$i up
ip link set team$i up
done
Splat looks like:
BUG: MAX_LOCKDEP_ENTRIES too low!
turning off the locking correctness validator.
Please attach the output of /proc/lock_stat to the bug report
CPU: 0 PID: 4104 Comm: ip Not tainted 6.5.0-rc7+ #45
Call Trace:
<TASK>
dump_stack_lvl+0x64/0xb0
add_lock_to_list+0x30d/0x5e0
check_prev_add+0x73a/0x23a0
...
sock_def_readable+0xfe/0x4f0
netlink_broadcast+0x76b/0xac0
nlmsg_notify+0x69/0x1d0
dev_open+0xed/0x130
...
Reported-by: syzbot+9bbbacfbf1e04d5221f7@syzkaller.appspotmail.com
Fixes:
369f61bee0f5 ("team: fix nested locking lockdep warning")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Quan Tian [Tue, 5 Sep 2023 10:36:10 +0000 (10:36 +0000)]
net/ipv6: SKB symmetric hash should incorporate transport ports
__skb_get_hash_symmetric() was added to compute a symmetric hash over
the protocol, addresses and transport ports, by commit
eb70db875671
("packet: Use symmetric hash for PACKET_FANOUT_HASH."). It uses
flow_keys_dissector_symmetric_keys as the flow_dissector to incorporate
IPv4 addresses, IPv6 addresses and ports. However, it should not specify
the flag as FLOW_DISSECTOR_F_STOP_AT_FLOW_LABEL, which stops further
dissection when an IPv6 flow label is encountered, making transport
ports not being incorporated in such case.
As a consequence, the symmetric hash is based on 5-tuple for IPv4 but
3-tuple for IPv6 when flow label is present. It caused a few problems,
e.g. when nft symhash and openvswitch l4_sym rely on the symmetric hash
to perform load balancing as different L4 flows between two given IPv6
addresses would always get the same symmetric hash, leading to uneven
traffic distribution.
Removing the use of FLOW_DISSECTOR_F_STOP_AT_FLOW_LABEL makes sure the
symmetric hash is based on 5-tuple for both IPv4 and IPv6 consistently.
Fixes:
eb70db875671 ("packet: Use symmetric hash for PACKET_FANOUT_HASH.")
Reported-by: Lars Ekman <uablrek@gmail.com>
Closes: https://github.com/antrea-io/antrea/issues/5457
Signed-off-by: Quan Tian <qtian@vmware.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexandre Ghiti [Sat, 22 Jul 2023 12:38:50 +0000 (14:38 +0200)]
riscv: libstub: Implement KASLR by using generic functions
We can now use arm64 functions to handle the move of the kernel physical
mapping: if KASLR is enabled, we will try to get a random seed from the
firmware, if not possible, the kernel will be moved to a location that
suits its alignment constraints.
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Tested-by: Song Shuai <songshuaishuai@tinylab.org>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Tested-by: Sami Tolvanen <samitolvanen@google.com>
Link: https://lore.kernel.org/r/20230722123850.634544-6-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Alexandre Ghiti [Sat, 22 Jul 2023 12:38:49 +0000 (14:38 +0200)]
libstub: Fix compilation warning for rv32
Fix the following warning which appears when compiled for rv32 by using
unsigned long type instead of u64.
../drivers/firmware/efi/libstub/efi-stub-helper.c: In function 'efi_kaslr_relocate_kernel':
../drivers/firmware/efi/libstub/efi-stub-helper.c:846:28: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
846 | (u64)_end < EFI_ALLOC_LIMIT) {
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Tested-by: Song Shuai <songshuaishuai@tinylab.org>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Tested-by: Sami Tolvanen <samitolvanen@google.com>
Link: https://lore.kernel.org/r/20230722123850.634544-5-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Alexandre Ghiti [Sat, 22 Jul 2023 12:38:48 +0000 (14:38 +0200)]
arm64: libstub: Move KASLR handling functions to kaslr.c
This prepares for riscv to use the same functions to handle the pĥysical
kernel move when KASLR is enabled.
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Tested-by: Song Shuai <songshuaishuai@tinylab.org>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Tested-by: Sami Tolvanen <samitolvanen@google.com>
Link: https://lore.kernel.org/r/20230722123850.634544-4-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Alexandre Ghiti [Sat, 22 Jul 2023 12:38:47 +0000 (14:38 +0200)]
riscv: Dump out kernel offset information on panic
Dump out the KASLR virtual kernel offset when panic to help debug kernel.
Signed-off-by: Zong Li <zong.li@sifive.com>
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Tested-by: Song Shuai <songshuaishuai@tinylab.org>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Tested-by: Sami Tolvanen <samitolvanen@google.com>
Link: https://lore.kernel.org/r/20230722123850.634544-3-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Alexandre Ghiti [Sat, 22 Jul 2023 12:38:46 +0000 (14:38 +0200)]
riscv: Introduce virtual kernel mapping KASLR
KASLR implementation relies on a relocatable kernel so that we can move
the kernel mapping.
The seed needed to virtually move the kernel is taken from the device tree,
so we rely on the bootloader to provide a correct seed. Zkr could be used
unconditionnally instead if implemented, but that's for another patch.
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Tested-by: Song Shuai <songshuaishuai@tinylab.org>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Tested-by: Sami Tolvanen <samitolvanen@google.com>
Link: https://lore.kernel.org/r/20230722123850.634544-2-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Fabio Estevam [Sat, 2 Sep 2023 13:44:07 +0000 (10:44 -0300)]
dt-bindings: rtc: ds3231: Remove text binding
The "maxim,ds3231" compatible is described in the rtc-ds1307.yaml, so
there is no need to keep the text bindings version.
Remove the maxim,ds3231.txt file in favor of the rtc-ds1307.yaml binding.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230902134407.2589099-1-festevam@gmail.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Alexandre Belloni [Sun, 27 Aug 2023 22:16:42 +0000 (00:16 +0200)]
rtc: wm8350: remove unnecessary messages
The RTC core already prints a message when the RTC is registered and when
registering fails, it is not necessary to have more in the driver.
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230827221643.544259-3-alexandre.belloni@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Alexandre Belloni [Sun, 27 Aug 2023 22:16:41 +0000 (00:16 +0200)]
rtc: twl: remove unnecessary messages
The RTC core already prints a message when the RTC is registered and when
registering fails, it is not necessary to have more in the driver.
Link: https://lore.kernel.org/r/20230827221643.544259-2-alexandre.belloni@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Alexandre Belloni [Sun, 27 Aug 2023 22:16:40 +0000 (00:16 +0200)]
rtc: sun6i: remove unnecessary message
The core already print a message once the rtc is successfully registered,
it is not necessary to print an other one.
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20230827221643.544259-1-alexandre.belloni@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Alexandre Belloni [Sun, 27 Aug 2023 22:15:31 +0000 (00:15 +0200)]
rtc: stop warning for invalid alarms when the alarm is disabled
When the alarm is not enabled, it may never have been set and so we can't
expect it to be valid. This will prevent the apparition of boot messages
like this one:
rtc rtc0: invalid alarm value: 2023-7-8 45:85:85
Link: https://lore.kernel.org/r/20230827221532.543353-1-alexandre.belloni@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Frank Li [Thu, 31 Aug 2023 14:13:24 +0000 (10:13 -0400)]
i3c: master: svc: fix probe failure when no i3c device exist
I3C masters are expected to support hot-join. This means at initialization
time we might not yet discover any device and this should not be treated
as a fatal error.
During the DAA procedure which happens at probe time, if no device has
joined, all CCC will be NACKed (from a bus perspective). This leads to an
early return with an error code which fails the probe of the master.
Let's avoid this by just telling the core through an I3C_ERROR_M2
return command code that no device was discovered, which is a valid
situation. This way the master will no longer bail out and fail to probe
for a wrong reason.
Cc: stable@vger.kernel.org
Fixes:
dd3c52846d59 ("i3c: master: svc: Add Silvaco I3C master driver")
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20230831141324.2841525-1-Frank.Li@nxp.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Ariel Marcovitch [Sat, 26 Aug 2023 17:33:17 +0000 (20:33 +0300)]
idr: fix param name in idr_alloc_cyclic() doc
The relevant parameter is 'start' and not 'nextid'
Fixes:
460488c58ca8 ("idr: Remove idr_alloc_ext")
Signed-off-by: Ariel Marcovitch <arielmarcovitch@gmail.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Philipp Stanner [Mon, 21 Aug 2023 08:21:29 +0000 (10:21 +0200)]
xarray: Document necessary flag in alloc functions
Adds a new line to the docstrings of functions wrapping __xa_alloc() and
__xa_alloc_cyclic(), informing about the necessity of flag XA_FLAGS_ALLOC
being set previously.
The documentation so far says that functions wrapping __xa_alloc() and
__xa_alloc_cyclic() are supposed to return either -ENOMEM or -EBUSY in
case of an error. If the xarray has been initialized without the flag
XA_FLAGS_ALLOC, however, they fail with a different, undocumented error
code.
As hinted at in Documentation/core-api/xarray.rst, wrappers around these
functions should only be invoked when the flag has been set. The
functions' documentation should reflect that as well.
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Raphael Gallais-Pou [Tue, 5 Sep 2023 07:27:40 +0000 (09:27 +0200)]
dt-bindings: irqchip: convert st,stih407-irq-syscfg to DT schema
Convert deprecated format to DT schema format.
Signed-off-by: Raphael Gallais-Pou <rgallaispou@gmail.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230905072740.23859-1-rgallaispou@gmail.com
Signed-off-by: Rob Herring <robh@kernel.org>
Rob Herring [Thu, 17 Aug 2023 20:27:13 +0000 (15:27 -0500)]
media: dt-bindings: Convert Omnivision OV7251 to DT schema
Convert the OmniVision OV7251 Image Sensor binding to DT schema format.
vddd-supply was listed as required, but the example and actual user
don't have it. Also, the data brief says it has an internal regulator,
so perhaps it is truly optional.
Add missing common "link-frequencies" which is used and required by the
Linux driver.
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Wolfram Sang <wsa@kernel.org> # for I2C
Link: https://lore.kernel.org/r/20230817202713.2180195-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Rob Herring [Thu, 17 Aug 2023 20:26:46 +0000 (15:26 -0500)]
media: dt-bindings: Merge OV5695 into OV5693 binding
The OV5695 binding is almost the same as the OV5693 binding. The only
difference is 'clock-names' is defined for OV5695. However, the lack of
clock-names is an omission as the Linux OV5693 driver expects the same
'xvclk' clock name.
'link-frequencies' is required by OV5693, but not OV5695, so make that
conditional. Really, this shouldn't vary by device, but we're stuck with
the existing binding use.
The rockchip-isp1 binding example is missing required properties, so it
has to be updated as well.
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230817202647.2179609-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Linus Torvalds [Tue, 5 Sep 2023 20:00:28 +0000 (13:00 -0700)]
Merge tag 'gfs2-v6.5-rc5-fixes' of git://git./linux/kernel/git/gfs2/linux-gfs2
Pull gfs2 updates from Andreas Gruenbacher:
- Fix a glock state (non-)transition bug when a dlm request times out
and is canceled, and we have locking requests that can now be granted
immediately
- Various fixes and cleanups in how the logd and quotad daemons are
woken up and terminated
- Fix several bugs in the quota data reference counting and shrinking.
Free quota data objects synchronously in put_super() instead of
letting call_rcu() run wild
- Make sure not to deallocate quota data during a withdraw; rather,
defer quota data deallocation to put_super(). Withdraws can happen in
contexts in which callers on the stack are holding quota data
references
- Many minor quota fixes and cleanups by Bob
- Update the the mailing list address for gfs2 and dlm. (It's the same
list for both and we are moving it to gfs2@lists.linux.dev)
- Various other minor cleanups
* tag 'gfs2-v6.5-rc5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2: (51 commits)
MAINTAINERS: Update dlm mailing list
MAINTAINERS: Update gfs2 mailing list
gfs2: change qd_slot_count to qd_slot_ref
gfs2: check for no eligible quota changes
gfs2: Remove useless assignment
gfs2: simplify slot_get
gfs2: Simplify qd2offset
gfs2: introduce qd_bh_get_or_undo
gfs2: Remove quota allocation info from quota file
gfs2: use constant for array size
gfs2: Set qd_sync_gen in do_sync
gfs2: Remove useless err set
gfs2: Small gfs2_quota_lock cleanup
gfs2: move qdsb_put and reduce redundancy
gfs2: improvements to sysfs status
gfs2: Don't try to sync non-changes
gfs2: Simplify function need_sync
gfs2: remove unneeded pg_oflow variable
gfs2: remove unneeded variable done
gfs2: pass sdp to gfs2_write_buf_to_page
...
Jerome Neanne [Tue, 5 Sep 2023 14:07:34 +0000 (16:07 +0200)]
regulator: tps6594-regulator: Fix random kernel crash
Random kernel crash detected in TI CICD when regulator driver is added.
This is root caused to irq index increment being done twice causing
irq_data being allocated outside of the range.
- Rework tps6594_request_reg_irqs with correct index increment
- Adjust irq_data kmalloc size to the exact size needed for the device
This has been reported on TI mainline. No public bug report associated.
Reported-by: Udit Kumar <u-kumar1@ti.com>
Fixes:
f17ccc5deb4d ("regulator: tps6594-regulator: Add driver for TI TPS6594 regulators")
Signed-off-by: Jerome Neanne <jneanne@baylibre.com>
Link: https://lore.kernel.org/r/20230828-tps6594_random_boot_crash_fix-v1-1-f29cbf9ddb37@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Linus Torvalds [Tue, 5 Sep 2023 19:45:55 +0000 (12:45 -0700)]
Merge tag 'fuse-update-6.6' of git://git./linux/kernel/git/mszeredi/fuse
Pull fuse updates from Miklos Szeredi:
- Revert non-waiting FLUSH due to a regression
- Fix a lookup counter leak in readdirplus
- Add an option to allow shared mmaps in no-cache mode
- Add btime support and statx intrastructure to the protocol
- Invalidate positive/negative dentry on failed create/delete
* tag 'fuse-update-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
fuse: conditionally fill kstat in fuse_do_statx()
fuse: invalidate dentry on EEXIST creates or ENOENT deletes
fuse: cache btime
fuse: implement statx
fuse: add ATTR_TIMEOUT macro
fuse: add STATX request
fuse: handle empty request_mask in statx
fuse: write back dirty pages before direct write in direct_io_relax mode
fuse: add a new fuse init flag to relax restrictions in no cache mode
fuse: invalidate page cache pages before direct write
fuse: nlookup missing decrement in fuse_direntplus_link
Revert "fuse: in fuse_flush only wait if someone wants the return code"
Rafael J. Wysocki [Wed, 30 Aug 2023 16:16:29 +0000 (18:16 +0200)]
thermal: core: Drop thermal_zone_device_register()
There are no more users of thermal_zone_device_register(), so drop it
from the core.
Note that thermal_zone_device_register_with_trips() may be renamed to
thermal_zone_device_register() in the future, but only after a grace
period allowing all of the possible work in progress that may be using
the latter to adjust.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Rafael J. Wysocki [Wed, 30 Aug 2023 16:14:57 +0000 (18:14 +0200)]
thermal: Use thermal_tripless_zone_device_register()
All of the remaining callers of thermal_zone_device_register()
can use thermal_tripless_zone_device_register(), so make them
do so in order to allow the former to be dropped.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>
Rafael J. Wysocki [Wed, 30 Aug 2023 16:13:35 +0000 (18:13 +0200)]
thermal: core: Add function for registering tripless thermal zones
Multiple callers of thermal_zone_device_register() don't pass any trips
to it and they might use a shortened argument list for that, so add
a special function with fewer arguments for this purpose.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Rafael J. Wysocki [Wed, 30 Aug 2023 16:11:38 +0000 (18:11 +0200)]
thermal: core: Clean up headers of thermal zone registration functions
For consistency, add a missing thermal_zone_device_register_with_trips()
stub for the CONFIG_THERMAL unset case, specify argument names in all of
the thermal zone registration and unregistration function headers and
make all of them use white space consistently.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Linus Torvalds [Tue, 5 Sep 2023 19:37:28 +0000 (12:37 -0700)]
Merge tag 'ata-6.6-rc1' of git://git./linux/kernel/git/dlemoal/libata
Pull ata updates from Damien Le Moal:
- Fix OF include file for ata platform drivers (Rob)
- Simplify various ahci, sata and pata platform drivers using the
function devm_platform_ioremap_resource() (Yangtao)
- Cleanup libata time related argument types (e.g. timeouts values)
(Sergey)
- Cleanup libata code around error handling as all ata drivers now
define a error_handler operation (Hannes and Niklas)
- Remove functions intended for libsas that are in fact unused (Niklas)
- Change the remove device callback of platform drivers to a null
function (Uwe)
- Simplify the pata_imx driver using devm_clk_get_enabled() (Li)
- Remove old and uinused remnants of the ide code in arm, parisc,
powerpc, sparc and m68k architectures and associated drivers
(pata_buddha, pata_falcon and pata_gayle) (Geert)
- Add missing MODULE_DESCRIPTION() in the sata_gemini and pata_ftide010
drivers (me)
- Several fixes for the pata_ep93xx and pata_falcon drivers (Nikita,
Michael)
- Add Elkhart Lake AHCI controller support to the ahci driver (Werner)
- Disable NCQ trim on Micron 1100 drives (Pawel)
* tag 'ata-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata: (60 commits)
ata: libata-core: Disable NCQ_TRIM on Micron 1100 drives
ata: ahci: Add Elkhart Lake AHCI controller
ata: pata_falcon: add data_swab option to byte-swap disk data
ata: pata_falcon: fix IO base selection for Q40
ata: pata_ep93xx: use soc_device_match for UDMA modes
ata: pata_ep93xx: fix error return code in probe
ata: sata_gemini: Add missing MODULE_DESCRIPTION
ata: pata_ftide010: Add missing MODULE_DESCRIPTION
m68k: Remove <asm/ide.h>
ata: pata_gayle: Remove #include <asm/ide.h>
ata: pata_falcon: Remove #include <asm/ide.h>
ata: pata_buddha: Remove #include <asm/ide.h>
asm-generic: Remove ide_iops.h
sparc: Remove <asm/ide.h>
powerpc: Remove <asm/ide.h>
parisc: Remove <asm/ide.h>
ARM: Remove <asm/ide.h>
ata: pata_imx: Use helper function devm_clk_get_enabled()
ata: sata_rcar: Convert to platform remove callback returning void
ata: sata_mv: Convert to platform remove callback returning void
...
Linus Torvalds [Tue, 5 Sep 2023 19:31:07 +0000 (12:31 -0700)]
Merge tag 'mailbox-v6.6' of git://git.linaro.org/landing-teams/working/fujitsu/integration
Pull mailbox updates from Jassi Brar:
- qcom: fix incorrect num_chans counting
- mhu: Remove redundant dev_err
- bcm: fix comments
- common changes:
- convert to use devm_platform_get_and_ioremap_resource
- correct DT includes
* tag 'mailbox-v6.6' of git://git.linaro.org/landing-teams/working/fujitsu/integration:
mailbox: qcom-ipcc: fix incorrect num_chans counting
mailbox: Explicitly include correct DT includes
mailbox: ti-msgmgr: Use devm_platform_ioremap_resource_byname()
mailbox: platform-mhu: Remove redundant dev_err()
mailbox: bcm-pdc: Fix some kernel-doc comments
mailbox: mailbox-test: Fix an error check in mbox_test_probe()
mailbox: tegra-hsp: Convert to devm_platform_ioremap_resource()
mailbox: rockchip: Use devm_platform_get_and_ioremap_resource()
mailbox: mailbox-test: Use devm_platform_get_and_ioremap_resource()
mailbox: bcm-pdc: Use devm_platform_get_and_ioremap_resource()
mailbox: bcm-ferxrm-mailbox: Use devm_platform_get_and_ioremap_resource()
Linus Torvalds [Tue, 5 Sep 2023 19:22:39 +0000 (12:22 -0700)]
Merge tag 'mm-hotfixes-stable-2023-09-05-11-51' of git://git./linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"Seven hotfixes. Four are cc:stable and the remainder pertain to issues
which were introduced in the current merge window"
* tag 'mm-hotfixes-stable-2023-09-05-11-51' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
sparc64: add missing initialization of folio in tlb_batch_add()
mm: memory-failure: use rcu lock instead of tasklist_lock when collect_procs()
revert "memfd: improve userspace warnings for missing exec-related flags".
rcu: dump vmalloc memory info safely
mm/vmalloc: add a safer version of find_vm_area() for debug
tools/mm: fix undefined reference to pthread_once
memcontrol: ensure memcg acquired by id is properly set up
Linus Torvalds [Tue, 5 Sep 2023 18:15:59 +0000 (11:15 -0700)]
Merge tag 'tpmdd-v6.6-rc1' of git://git./linux/kernel/git/jarkko/linux-tpmdd
Pull more tpm updates from Jarkko Sakkinen:
"Two more bug fixes for tpm_crb, categorically disabling rng for AMD
CPU's in the tpm_crb driver, discarding the earlier probing approach"
* tag 'tpmdd-v6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
tpm: Enable hwrng only for Pluton on AMD CPUs
tpm_crb: Fix an error handling path in crb_acpi_add()
Alexander Gordeev [Fri, 1 Sep 2023 06:11:14 +0000 (08:11 +0200)]
s390/vmem: do not silently ignore mapping limit
The only interface that allows drivers establishing
liner mappings is vmem_add_mapping(). It does check
a requested range against allowed limits and a call
to modify_pagetable() with an invalid mapping range
is impossible.
Hence, an attempt to map an address range outside of
the identity mapping or vmemmap array could only be
kernel bug.
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Andy Shevchenko [Thu, 31 Aug 2023 11:00:00 +0000 (14:00 +0300)]
s390/zcrypt: utilize dev_set_name() ability to use a formatted string
With the dev_set_name() prototype it's not obvious that it takes
a formatted string as a parameter. Use its facility instead of
duplicating the same with strncpy()/snprintf() calls.
With this, also prevent return error code to be shadowed.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230831110000.24279-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Andy Shevchenko [Thu, 31 Aug 2023 10:59:59 +0000 (13:59 +0300)]
s390/zcrypt: don't leak memory if dev_set_name() fails
When dev_set_name() fails, zcdn_create() doesn't free the newly
allocated resources. Do it.
Fixes:
00fab2350e6b ("s390/zcrypt: multiple zcrypt device nodes support")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230831110000.24279-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Alexander Gordeev [Fri, 1 Sep 2023 13:12:13 +0000 (15:12 +0200)]
s390/mm: fix MAX_DMA_ADDRESS physical vs virtual confusion
MAX_DMA_ADDRESS is defined and treated as a physical address,
whereas it should be virtual.
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Mike Rapoport (IBM) [Mon, 4 Sep 2023 17:37:59 +0000 (20:37 +0300)]
sparc64: add missing initialization of folio in tlb_batch_add()
Commit
1a10a44dfc1d ("sparc64: implement the new page table range API")
missed initialization of folio variable in tlb_batch_add() which causes
boot tests to crash.
Add missing initialization.
Link: https://lkml.kernel.org/r/20230904174350.GF3223@kernel.org
Fixes:
1a10a44dfc1d ("sparc64: implement the new page table range API")
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
Reported-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tong Tiangen [Mon, 28 Aug 2023 02:25:27 +0000 (10:25 +0800)]
mm: memory-failure: use rcu lock instead of tasklist_lock when collect_procs()
We found a softlock issue in our test, analyzed the logs, and found that
the relevant CPU call trace as follows:
CPU0:
_do_fork
-> copy_process()
-> write_lock_irq(&tasklist_lock) //Disable irq,waiting for
//tasklist_lock
CPU1:
wp_page_copy()
->pte_offset_map_lock()
-> spin_lock(&page->ptl); //Hold page->ptl
-> ptep_clear_flush()
-> flush_tlb_others() ...
-> smp_call_function_many()
-> arch_send_call_function_ipi_mask()
-> csd_lock_wait() //Waiting for other CPUs respond
//IPI
CPU2:
collect_procs_anon()
-> read_lock(&tasklist_lock) //Hold tasklist_lock
->for_each_process(tsk)
-> page_mapped_in_vma()
-> page_vma_mapped_walk()
-> map_pte()
->spin_lock(&page->ptl) //Waiting for page->ptl
We can see that CPU1 waiting for CPU0 respond IPI,CPU0 waiting for CPU2
unlock tasklist_lock, CPU2 waiting for CPU1 unlock page->ptl. As a result,
softlockup is triggered.
For collect_procs_anon(), what we're doing is task list iteration, during
the iteration, with the help of call_rcu(), the task_struct object is freed
only after one or more grace periods elapse. the logic as follows:
release_task()
-> __exit_signal()
-> __unhash_process()
-> list_del_rcu()
-> put_task_struct_rcu_user()
-> call_rcu(&task->rcu, delayed_put_task_struct)
delayed_put_task_struct()
-> put_task_struct()
-> if (refcount_sub_and_test())
__put_task_struct()
-> free_task()
Therefore, under the protection of the rcu lock, we can safely use
get_task_struct() to ensure a safe reference to task_struct during the
iteration.
By removing the use of tasklist_lock in task list iteration, we can break
the softlock chain above.
The same logic can also be applied to:
- collect_procs_file()
- collect_procs_fsdax()
- collect_procs_ksm()
Link: https://lkml.kernel.org/r/20230828022527.241693-1-tongtiangen@huawei.com
Signed-off-by: Tong Tiangen <tongtiangen@huawei.com>
Acked-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Andrew Morton [Sat, 2 Sep 2023 22:59:31 +0000 (15:59 -0700)]
revert "memfd: improve userspace warnings for missing exec-related flags".
This warning is telling userspace developers to pass MFD_EXEC and
MFD_NOEXEC_SEAL to memfd_create(). Commit
434ed3350f57 ("memfd: improve
userspace warnings for missing exec-related flags") made the warning more
frequent and visible in the hope that this would accelerate the fixing of
errant userspace.
But the overall effect is to generate far too much dmesg noise.
Fixes:
434ed3350f57 ("memfd: improve userspace warnings for missing exec-related flags")
Reported-by: Damian Tometzki <dtometzki@fedoraproject.org>
Closes: https://lkml.kernel.org/r/ZPFzCSIgZ4QuHsSC@fedora.fritz.box
Cc: Aleksa Sarai <cyphar@cyphar.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Daniel Verkamp <dverkamp@chromium.org>
Cc: Jeff Xu <jeffxu@google.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Pavel Pisa [Mon, 4 Sep 2023 10:00:02 +0000 (12:00 +0200)]
of: overlay: Fix of_overlay_fdt_apply prototype when !CONFIG_OF_OVERLAY
The of_overlay_fdt_apply has been changed but when CONFIG_OF_OVERLAY
support is not configured then old stub prototype is declared
by of.h header.
Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz>
Fixes:
47284862bfc7 ("of: overlay: Extend of_overlay_fdt_apply() to specify the target node")
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
Link: https://lore.kernel.org/r/20230904100002.7913-1-pisa@cmp.felk.cvut.cz
Signed-off-by: Rob Herring <robh@kernel.org>
Linus Torvalds [Tue, 5 Sep 2023 18:01:47 +0000 (11:01 -0700)]
Merge tag 'kbuild-v6.6' of git://git./linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Enable -Wenum-conversion warning option
- Refactor the rpm-pkg target
- Fix scripts/setlocalversion to consider annotated tags for rt-kernel
- Add a jump key feature for the search menu of 'make nconfig'
- Support Qt6 for 'make xconfig'
- Enable -Wformat-overflow, -Wformat-truncation, -Wstringop-overflow,
and -Wrestrict warnings for W=1 builds
- Replace <asm/export.h> with <linux/export.h> for alpha, ia64, and
sparc
- Support DEB_BUILD_OPTIONS=parallel=N for the debian source package
- Refactor scripts/Makefile.modinst and fix some modules_sign issues
- Add a new Kconfig env variable to warn symbols that are not defined
anywhere
- Show help messages of config fragments in 'make help'
* tag 'kbuild-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (62 commits)
kconfig: fix possible buffer overflow
kbuild: Show marked Kconfig fragments in "help"
kconfig: add warn-unknown-symbols sanity check
kbuild: dummy-tools: make MPROFILE_KERNEL checks work on BE
Documentation/llvm: refresh docs
modpost: Skip .llvm.call-graph-profile section check
kbuild: support modules_sign for external modules as well
kbuild: support 'make modules_sign' with CONFIG_MODULE_SIG_ALL=n
kbuild: move more module installation code to scripts/Makefile.modinst
kbuild: reduce the number of mkdir calls during modules_install
kbuild: remove $(MODLIB)/source symlink
kbuild: move depmod rule to scripts/Makefile.modinst
kbuild: add modules_sign to no-{compiler,sync-config}-targets
kbuild: do not run depmod for 'make modules_sign'
kbuild: deb-pkg: support DEB_BUILD_OPTIONS=parallel=N in debian/rules
alpha: remove <asm/export.h>
alpha: replace #include <asm/export.h> with #include <linux/export.h>
ia64: remove <asm/export.h>
ia64: replace #include <asm/export.h> with #include <linux/export.h>
sparc: remove <asm/export.h>
...
Linus Torvalds [Tue, 5 Sep 2023 17:56:27 +0000 (10:56 -0700)]
Merge tag 'mm-stable-2023-09-04-14-00' of git://git./linux/kernel/git/akpm/mm
Pull more MM updates from Andrew Morton:
- Stefan Roesch has added ksm statistics to /proc/pid/smaps
- Also a number of singleton patches, mainly cleanups and leftovers
* tag 'mm-stable-2023-09-04-14-00' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm/kmemleak: move up cond_resched() call in page scanning loop
mm: page_alloc: remove stale CMA guard code
MAINTAINERS: add rmap.h to mm entry
rmap: remove anon_vma_link() nommu stub
proc/ksm: add ksm stats to /proc/pid/smaps
mm/hwpoison: rename hwp_walk* to hwpoison_walk*
mm: memory-failure: add PageOffline() check
Olga Zaborska [Tue, 25 Jul 2023 08:10:58 +0000 (10:10 +0200)]
igb: Change IGB_MIN to allow set rx/tx value between 64 and 80
Change the minimum value of RX/TX descriptors to 64 to enable setting the rx/tx
value between 64 and 80. All igb devices can use as low as 64 descriptors.
This change will unify igb with other drivers.
Based on commit
7b1be1987c1e ("e1000e: lower ring minimum size to 64")
Fixes:
9d5c824399de ("igb: PCI-Express 82575 Gigabit Ethernet driver")
Signed-off-by: Olga Zaborska <olga.zaborska@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Olga Zaborska [Tue, 25 Jul 2023 08:10:57 +0000 (10:10 +0200)]
igbvf: Change IGBVF_MIN to allow set rx/tx value between 64 and 80
Change the minimum value of RX/TX descriptors to 64 to enable setting the rx/tx
value between 64 and 80. All igbvf devices can use as low as 64 descriptors.
This change will unify igbvf with other drivers.
Based on commit
7b1be1987c1e ("e1000e: lower ring minimum size to 64")
Fixes:
d4e0fe01a38a ("igbvf: add new driver to support 82576 virtual functions")
Signed-off-by: Olga Zaborska <olga.zaborska@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Olga Zaborska [Tue, 25 Jul 2023 08:10:56 +0000 (10:10 +0200)]
igc: Change IGC_MIN to allow set rx/tx value between 64 and 80
Change the minimum value of RX/TX descriptors to 64 to enable setting the rx/tx
value between 64 and 80. All igc devices can use as low as 64 descriptors.
This change will unify igc with other drivers.
Based on commit
7b1be1987c1e ("e1000e: lower ring minimum size to 64")
Fixes:
0507ef8a0372 ("igc: Add transmit and receive fastpath and interrupt handlers")
Signed-off-by: Olga Zaborska <olga.zaborska@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Lizhi Hou [Thu, 31 Aug 2023 18:19:07 +0000 (11:19 -0700)]
PCI: Fix CONFIG_PCI_DYNAMIC_OF_NODES kconfig dependencies
Generating interrupt-map property depends on of_irq_parse_raw() which
is enabled by CONFIG_OF_IRQ. Change CONFIG_PCI_DYNAMIC_OF_NODES
dependency from CONFIG_OF to CONFIG_OF_IRQ.
Closes: https://lore.kernel.org/linux-devicetree/
2187619d-55bc-41bb-bbb4-
6059399db997@roeck-us.net/
Fixes:
407d1a51921e ("PCI: Create device tree node for bridge")
Link: https://lore.kernel.org/r/1693505947-29786-1-git-send-email-lizhi.hou@amd.com
Reported-by: Guenter Roeck <groeck7@gmail.com>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Linus Torvalds [Tue, 5 Sep 2023 17:15:22 +0000 (10:15 -0700)]
Merge tag 'microblaze-v6.6' of git://git.monstr.eu/linux-2.6-microblaze
Pull microblaze updates from Michal Simek:
- Cleanup DT headers
- Remove unused zalloc_maybe_bootmem()
- Make virt_to_pfn() a static inline
* tag 'microblaze-v6.6' of git://git.monstr.eu/linux-2.6-microblaze:
microblaze: Make virt_to_pfn() a static inline
microblaze: Remove zalloc_maybe_bootmem()
microblaze: Explicitly include correct DT includes
Zqiang [Mon, 4 Sep 2023 18:08:05 +0000 (18:08 +0000)]
rcu: dump vmalloc memory info safely
Currently, for double invoke call_rcu(), will dump rcu_head objects memory
info, if the objects is not allocated from the slab allocator, the
vmalloc_dump_obj() will be invoke and the vmap_area_lock spinlock need to
be held, since the call_rcu() can be invoked in interrupt context,
therefore, there is a possibility of spinlock deadlock scenarios.
And in Preempt-RT kernel, the rcutorture test also trigger the following
lockdep warning:
BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:48
in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 1, name: swapper/0
preempt_count: 1, expected: 0
RCU nest depth: 1, expected: 1
3 locks held by swapper/0/1:
#0:
ffffffffb534ee80 (fullstop_mutex){+.+.}-{4:4}, at: torture_init_begin+0x24/0xa0
#1:
ffffffffb5307940 (rcu_read_lock){....}-{1:3}, at: rcu_torture_init+0x1ec7/0x2370
#2:
ffffffffb536af40 (vmap_area_lock){+.+.}-{3:3}, at: find_vmap_area+0x1f/0x70
irq event stamp: 565512
hardirqs last enabled at (565511): [<
ffffffffb379b138>] __call_rcu_common+0x218/0x940
hardirqs last disabled at (565512): [<
ffffffffb5804262>] rcu_torture_init+0x20b2/0x2370
softirqs last enabled at (399112): [<
ffffffffb36b2586>] __local_bh_enable_ip+0x126/0x170
softirqs last disabled at (399106): [<
ffffffffb43fef59>] inet_register_protosw+0x9/0x1d0
Preemption disabled at:
[<
ffffffffb58040c3>] rcu_torture_init+0x1f13/0x2370
CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W 6.5.0-rc4-rt2-yocto-preempt-rt+ #15
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.2-0-gea1b7a073390-prebuilt.qemu.org 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x68/0xb0
dump_stack+0x14/0x20
__might_resched+0x1aa/0x280
? __pfx_rcu_torture_err_cb+0x10/0x10
rt_spin_lock+0x53/0x130
? find_vmap_area+0x1f/0x70
find_vmap_area+0x1f/0x70
vmalloc_dump_obj+0x20/0x60
mem_dump_obj+0x22/0x90
__call_rcu_common+0x5bf/0x940
? debug_smp_processor_id+0x1b/0x30
call_rcu_hurry+0x14/0x20
rcu_torture_init+0x1f82/0x2370
? __pfx_rcu_torture_leak_cb+0x10/0x10
? __pfx_rcu_torture_leak_cb+0x10/0x10
? __pfx_rcu_torture_init+0x10/0x10
do_one_initcall+0x6c/0x300
? debug_smp_processor_id+0x1b/0x30
kernel_init_freeable+0x2b9/0x540
? __pfx_kernel_init+0x10/0x10
kernel_init+0x1f/0x150
ret_from_fork+0x40/0x50
? __pfx_kernel_init+0x10/0x10
ret_from_fork_asm+0x1b/0x30
</TASK>
The previous patch fixes this by using the deadlock-safe best-effort
version of find_vm_area. However, in case of failure print the fact that
the pointer was a vmalloc pointer so that we print at least something.
Link: https://lkml.kernel.org/r/20230904180806.1002832-2-joel@joelfernandes.org
Fixes:
98f180837a89 ("mm: Make mem_dump_obj() handle vmalloc() memory")
Signed-off-by: Zqiang <qiang.zhang1211@gmail.com>
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Reported-by: Zhen Lei <thunder.leizhen@huaweicloud.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Uladzislau Rezki (Sony) <urezki@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Joel Fernandes (Google) [Mon, 4 Sep 2023 18:08:04 +0000 (18:08 +0000)]
mm/vmalloc: add a safer version of find_vm_area() for debug
It is unsafe to dump vmalloc area information when trying to do so from
some contexts. Add a safer trylock version of the same function to do a
best-effort VMA finding and use it from vmalloc_dump_obj().
[applied test robot feedback on unused function fix.]
[applied Uladzislau feedback on locking.]
Link: https://lkml.kernel.org/r/20230904180806.1002832-1-joel@joelfernandes.org
Fixes:
98f180837a89 ("mm: Make mem_dump_obj() handle vmalloc() memory")
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Reviewed-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Reported-by: Zhen Lei <thunder.leizhen@huaweicloud.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Zqiang <qiang.zhang1211@gmail.com>
Cc: <stable@vger.kernel.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Xie XiuQi [Thu, 31 Aug 2023 03:42:05 +0000 (11:42 +0800)]
tools/mm: fix undefined reference to pthread_once
Commit
97d5f2e9ee12 ("tools api fs: More thread safety for global
filesystem variables") introduces pthread_once, so the libpthread
should be added at link time, or we'll meet the following compile
error when 'make -C tools/mm':
gcc -Wall -Wextra -I../lib/ -o page-types page-types.c ../lib/api/libapi.a
~/linux/tools/lib/api/fs/fs.c:146: undefined reference to `pthread_once'
~/linux/tools/lib/api/fs/fs.c:147: undefined reference to `pthread_once'
~/linux/tools/lib/api/fs/fs.c:148: undefined reference to `pthread_once'
~/linux/tools/lib/api/fs/fs.c:149: undefined reference to `pthread_once'
~/linux/tools/lib/api/fs/fs.c:150: undefined reference to `pthread_once'
/usr/bin/ld: ../lib/api/libapi.a(libapi-in.o):~/linux/tools/lib/api/fs/fs.c:151:
more undefined references to `pthread_once' follow
collect2: error: ld returned 1 exit status
make: *** [Makefile:22: page-types] Error 1
Link: https://lkml.kernel.org/r/20230831034205.2376653-1-xiexiuqi@huaweicloud.com
Fixes:
97d5f2e9ee12 ("tools api fs: More thread safety for global filesystem variables")
Signed-off-by: Xie XiuQi <xiexiuqi@huawei.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Johannes Weiner [Wed, 23 Aug 2023 22:54:30 +0000 (15:54 -0700)]
memcontrol: ensure memcg acquired by id is properly set up
In the eviction recency check, we attempt to retrieve the memcg to which
the folio belonged when it was evicted, by the memcg id stored in the
shadow entry. However, there is a chance that the retrieved memcg is not
the original memcg that has been killed, but a new one which happens to
have the same id.
This is a somewhat unfortunate, but acceptable and rare inaccuracy in the
heuristics. However, if we retrieve this new memcg between its allocation
and when it is properly attached to the memcg hierarchy, we could run into
the following NULL pointer exception during the memcg hierarchy traversal
done in mem_cgroup_get_nr_swap_pages():
[ 155757.793456] BUG: kernel NULL pointer dereference, address:
00000000000000c0
[ 155757.807568] #PF: supervisor read access in kernel mode
[ 155757.818024] #PF: error_code(0x0000) - not-present page
[ 155757.828482] PGD
401f77067 P4D
401f77067 PUD
401f76067 PMD 0
[ 155757.839985] Oops: 0000 [#1] SMP
[ 155757.887870] RIP: 0010:mem_cgroup_get_nr_swap_pages+0x3d/0xb0
[ 155757.899377] Code: 29 19 4a 02 48 39 f9 74 63 48 8b 97 c0 00 00 00 48 8b b7 58 02 00 00 48 2b b7 c0 01 00 00 48 39 f0 48 0f 4d c6 48 39 d1 74 42 <48> 8b b2 c0 00 00 00 48 8b ba 58 02 00 00 48 2b ba c0 01 00 00 48
[ 155757.937125] RSP: 0018:
ffffc9002ecdfbc8 EFLAGS:
00010286
[ 155757.947755] RAX:
00000000003a3b1c RBX:
000007ffffffffff RCX:
ffff888280183000
[ 155757.962202] RDX:
0000000000000000 RSI:
0007ffffffffffff RDI:
ffff888bbc2d1000
[ 155757.976648] RBP:
0000000000000001 R08:
000000000000000b R09:
ffff888ad9cedba0
[ 155757.991094] R10:
ffffea0039c07900 R11:
0000000000000010 R12:
ffff888b23a7b000
[ 155758.005540] R13:
0000000000000000 R14:
ffff888bbc2d1000 R15:
000007ffffc71354
[ 155758.019991] FS:
00007f6234c68640(0000) GS:
ffff88903f9c0000(0000) knlGS:
0000000000000000
[ 155758.036356] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 155758.048023] CR2:
00000000000000c0 CR3:
0000000a83eb8004 CR4:
00000000007706e0
[ 155758.062473] DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
[ 155758.076924] DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
[ 155758.091376] PKRU:
55555554
[ 155758.096957] Call Trace:
[ 155758.102016] <TASK>
[ 155758.106502] ? __die+0x78/0xc0
[ 155758.112793] ? page_fault_oops+0x286/0x380
[ 155758.121175] ? exc_page_fault+0x5d/0x110
[ 155758.129209] ? asm_exc_page_fault+0x22/0x30
[ 155758.137763] ? mem_cgroup_get_nr_swap_pages+0x3d/0xb0
[ 155758.148060] workingset_test_recent+0xda/0x1b0
[ 155758.157133] workingset_refault+0xca/0x1e0
[ 155758.165508] filemap_add_folio+0x4d/0x70
[ 155758.173538] page_cache_ra_unbounded+0xed/0x190
[ 155758.182919] page_cache_sync_ra+0xd6/0x1e0
[ 155758.191738] filemap_read+0x68d/0xdf0
[ 155758.199495] ? mlx5e_napi_poll+0x123/0x940
[ 155758.207981] ? __napi_schedule+0x55/0x90
[ 155758.216095] __x64_sys_pread64+0x1d6/0x2c0
[ 155758.224601] do_syscall_64+0x3d/0x80
[ 155758.232058] entry_SYSCALL_64_after_hwframe+0x46/0xb0
[ 155758.242473] RIP: 0033:0x7f62c29153b5
[ 155758.249938] Code: e8 48 89 75 f0 89 7d f8 48 89 4d e0 e8 b4 e6 f7 ff 41 89 c0 4c 8b 55 e0 48 8b 55 e8 48 8b 75 f0 8b 7d f8 b8 11 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 33 44 89 c7 48 89 45 f8 e8 e7 e6 f7 ff 48 8b
[ 155758.288005] RSP: 002b:
00007f6234c5ffd0 EFLAGS:
00000293 ORIG_RAX:
0000000000000011
[ 155758.303474] RAX:
ffffffffffffffda RBX:
00007f628c4e70c0 RCX:
00007f62c29153b5
[ 155758.318075] RDX:
000000000003c041 RSI:
00007f61d2986000 RDI:
0000000000000076
[ 155758.332678] RBP:
00007f6234c5fff0 R08:
0000000000000000 R09:
0000000064d5230c
[ 155758.347452] R10:
000000000027d450 R11:
0000000000000293 R12:
000000000003c041
[ 155758.362044] R13:
00007f61d2986000 R14:
00007f629e11b060 R15:
000000000027d450
[ 155758.376661] </TASK>
This patch fixes the issue by moving the memcg's id publication from the
alloc stage to online stage, ensuring that any memcg acquired via id must
be connected to the memcg tree.
Link: https://lkml.kernel.org/r/20230823225430.166925-1-nphamcs@gmail.com
Fixes:
f78dfc7b77d5 ("workingset: fix confusion around eviction vs refault container")
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Co-developed-by: Nhat Pham <nphamcs@gmail.com>
Signed-off-by: Nhat Pham <nphamcs@gmail.com>
Acked-by: Shakeel Butt <shakeelb@google.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Linus Torvalds [Tue, 5 Sep 2023 17:09:31 +0000 (10:09 -0700)]
Merge tag 'for-linus' of https://github.com/openrisc/linux
Pull OpenRISC updates from Stafford Horne:
- Fixes from me to cleanup all compiler warnings reported under
arch/openrisc
- One cleanup from Linus Walleij to convert pfn macros to static
inlines
* tag 'for-linus' of https://github.com/openrisc/linux:
openrisc: Remove kernel-doc marker from ioremap comment
openrisc: Remove unused tlb_init function
openriac: Remove unused nommu_dump_state function
openrisc: Include cpu.h and switch_to.h for prototypes
openrisc: Add prototype for die to bug.h
openrisc: Add prototype for show_registers to processor.h
openrisc: Declare do_signal function as static
openrisc: Add missing prototypes for assembly called fnctions
openrisc: Make pfn accessors statics inlines
Konstantin Meskhidze [Tue, 5 Sep 2023 09:59:14 +0000 (17:59 +0800)]
kconfig: fix possible buffer overflow
Buffer 'new_argv' is accessed without bound check after accessing with
bound check via 'new_argc' index.
Fixes:
e298f3b49def ("kconfig: add built-in function support")
Co-developed-by: Ivanov Mikhail <ivanov.mikhail1@huawei-partners.com>
Signed-off-by: Konstantin Meskhidze <konstantin.meskhidze@huawei.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Geetha sowjanya [Tue, 5 Sep 2023 06:48:16 +0000 (12:18 +0530)]
octeontx2-af: Fix truncation of smq in CN10K NIX AQ enqueue mbox handler
The smq value used in the CN10K NIX AQ instruction enqueue mailbox
handler was truncated to 9-bit value from 10-bit value because of
typecasting the CN10K mbox request structure to the CN9K structure.
Though this hasn't caused any problems when programming the NIX SQ
context to the HW because the context structure is the same size.
However, this causes a problem when accessing the structure parameters.
This patch reads the right smq value for each platform.
Fixes:
30077d210c83 ("octeontx2-af: cn10k: Update NIX/NPA context structure")
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Tue, 5 Sep 2023 04:23:38 +0000 (04:23 +0000)]
igmp: limit igmpv3_newpack() packet size to IP_MAX_MTU
This is a follow up of commit
915d975b2ffa ("net: deal with integer
overflows in kmalloc_reserve()") based on David Laight feedback.
Back in 2010, I failed to realize malicious users could set dev->mtu
to arbitrary values. This mtu has been since limited to 0x7fffffff but
regardless of how big dev->mtu is, it makes no sense for igmpv3_newpack()
to allocate more than IP_MAX_MTU and risk various skb fields overflows.
Fixes:
57e1ab6eaddc ("igmp: refine skb allocations")
Link: https://lore.kernel.org/netdev/d273628df80f45428e739274ab9ecb72@AcuMS.aculab.com/
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: David Laight <David.Laight@ACULAB.COM>
Cc: Kyle Zeng <zengyhkyle@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Amadeusz Sławiński [Tue, 5 Sep 2023 09:31:47 +0000 (11:31 +0200)]
ASoC: Intel: avs: Provide support for fallback topology
HDA and HDMI devices are simple enough that in case of user not having
topology tailored to their device, they can use fallback topology.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20230905093147.1960675-1-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>