platform/kernel/linux-amlogic.git
11 years agostaging: comedi: addi_common: remove i_IorangeBase0 from boardinfo
H Hartley Sweeten [Wed, 10 Apr 2013 18:32:30 +0000 (11:32 -0700)]
staging: comedi: addi_common: remove i_IorangeBase0 from boardinfo

The i_IorangeBase0 boardinfo is not used. Remove it.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agostaging: comedi: addi_common: remove i_IorangeBase2 from boardinfo
H Hartley Sweeten [Wed, 10 Apr 2013 18:32:07 +0000 (11:32 -0700)]
staging: comedi: addi_common: remove i_IorangeBase2 from boardinfo

The i_IorangeBase2 boardinfo is not used. Remove it.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agostaging: comedi: addi_common: remove i_IorangeBase3 from boardinfo
H Hartley Sweeten [Wed, 10 Apr 2013 18:31:46 +0000 (11:31 -0700)]
staging: comedi: addi_common: remove i_IorangeBase3 from boardinfo

When it is used, the entire PCI bar is ioremap'ed with pci_ioremap_bar().
The i_IorangeBase3 boardinfo is no longer needed.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agostaging: comedi: addi_common: use pci_ioremap_bar()
H Hartley Sweeten [Wed, 10 Apr 2013 18:31:24 +0000 (11:31 -0700)]
staging: comedi: addi_common: use pci_ioremap_bar()

Use pci_ioremap_bar() to ioremap the PCI resources. That function
just takes the pci device and a bar number. It also has some
additional sanity checks to make sure the bar is actually a
memory resource.

This also makes sure that the entire PCI bar is ioremap'ed instead
of assuming the size of the bar.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agostaging: comedi: jr3_pci: use pci_ioremap_bar()
H Hartley Sweeten [Wed, 10 Apr 2013 18:31:05 +0000 (11:31 -0700)]
staging: comedi: jr3_pci: use pci_ioremap_bar()

Use pci_ioremap_bar() to ioremap the PCI resources. That function
just takes the pci device and a bar number. It also has some
additional sanity checks to make sure the bar is actually a
memory resource.

This also makes sure that the entire PCI bar is ioremap'ed instead
of assuming the size of the bar.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agostaging: comedi: mite: use pci_ioremap_bar()
H Hartley Sweeten [Wed, 10 Apr 2013 18:30:45 +0000 (11:30 -0700)]
staging: comedi: mite: use pci_ioremap_bar()

Use pci_ioremap_bar() to ioremap the PCI resources. That function
just takes the pci device and a bar number. It also has some
additional sanity checks to make sure the bar is actually a
memory resource.

This also makes sure that the entire PCI bar is ioremap'ed instead
of assuming the size of a bar.

For aesthetic reasons, don't set the private data phys_addr vars
until after the ioremap is successful.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agostaging: comedi: icp_multi: use pci_ioremap_bar()
H Hartley Sweeten [Wed, 10 Apr 2013 18:30:28 +0000 (11:30 -0700)]
staging: comedi: icp_multi: use pci_ioremap_bar()

Use pci_ioremap_bar() to ioremap the PCI resources. That function
just takes the pci device and a bar number. It also has some
additional sanity checks to make sure the bar is actually a
memory resource.

This also makes sure that the entire PCI bar is ioremap'ed instead
of assuming the size of the bar.

Also, since this driver only uses memory mapped I/O it is not
necessary to set the dev->iobase.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agostaging: comedi: 8255_pci: use pci_ioremap_bar()
H Hartley Sweeten [Wed, 10 Apr 2013 18:30:11 +0000 (11:30 -0700)]
staging: comedi: 8255_pci: use pci_ioremap_bar()

Use pci_ioremap_bar() to ioremap the PCI resources. That function
just takes the pci device and a bar number. It also has some
additional sanity checks to make sure the bar is actually a
memory resource.

Refactor the code a bit. The dev->iobase only needs to be set
when the board does not use memory mapped I/O. And the 'iobase'
passed to subdev_8255_init() is an unsigned long.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agostaging: comedi: dt3000: use pci_ioremap_bar()
H Hartley Sweeten [Wed, 10 Apr 2013 18:29:07 +0000 (11:29 -0700)]
staging: comedi: dt3000: use pci_ioremap_bar()

Use pci_ioremap_bar() to ioremap the PCI resources. That function
just takes the pci device and a bar number. It also has some
additional sanity checks to make sure the bar is actually a
memory resource.

This also makes sure that the entire PCI bar is ioremap'ed instead
of assuming the size of the bar.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agostaging: comedi: cb_pcidas64: tidy up the *phys_iobase
H Hartley Sweeten [Wed, 10 Apr 2013 18:28:47 +0000 (11:28 -0700)]
staging: comedi: cb_pcidas64: tidy up the *phys_iobase

This driver does not use the dev->iobase so don't bother initializing
it.

The plx9080_phys_iobase is not used in the driver. Remove it from the
private data.

Tidy up the initialization of the other phy_iobase variables.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agostaging: comedi: cb_pcidas64: use pci_ioremap_bar()
H Hartley Sweeten [Wed, 10 Apr 2013 18:28:28 +0000 (11:28 -0700)]
staging: comedi: cb_pcidas64: use pci_ioremap_bar()

Use pci_ioremap_bar() to ioremap the PCI resources. That function
just takes the pci device and a bar number. It also has some
additional sanity checks to make sure the bar is actually a
memory resource.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agostaging: comedi: cb_pcidas64: remove the base_address_regions enum
H Hartley Sweeten [Wed, 10 Apr 2013 18:28:10 +0000 (11:28 -0700)]
staging: comedi: cb_pcidas64: remove the base_address_regions enum

This enum is only used in the ioremap of the PCI resources and it
doesn't really help make the code any clearer.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agostaging: comedi: s626: use pci_ioremap_bar()
H Hartley Sweeten [Wed, 10 Apr 2013 18:27:50 +0000 (11:27 -0700)]
staging: comedi: s626: use pci_ioremap_bar()

Use pci_ioremap_bar() to ioremap the PCI resources. That function
just takes the pci device and a bar number. It also has some
additional sanity checks to make sure the bar is actually a
memory resource.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agostaging: comedi: me_daq: use pci_ioremap_bar()
H Hartley Sweeten [Wed, 10 Apr 2013 18:27:33 +0000 (11:27 -0700)]
staging: comedi: me_daq: use pci_ioremap_bar()

Use pci_ioremap_bar() to ioremap the PCI resources. That function
just takes the pci device and a bar number. It also has some
additional sanity checks to make sure the bar is actually a
memory resource.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agostaging: comedi: gsc_hpdi: use pci_ioremap_bar()
H Hartley Sweeten [Wed, 10 Apr 2013 18:27:13 +0000 (11:27 -0700)]
staging: comedi: gsc_hpdi: use pci_ioremap_bar()

Use pci_ioremap_bar() to ioremap the PCI resources. That function
just takes the pci device and a bar number. It also has some
additional sanity checks to make sure the bar is actually a
memory resource.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agostaging: comedi: gsc_hpdi: remove the base_address_regions enum
H Hartley Sweeten [Wed, 10 Apr 2013 18:26:54 +0000 (11:26 -0700)]
staging: comedi: gsc_hpdi: remove the base_address_regions enum

This enum is only used in the ioremap of the PCI resources and it
doesn't really help make the code any clearer.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agostaging: comedi: daqboard2000: use pci_ioremap_bar()
H Hartley Sweeten [Wed, 10 Apr 2013 18:26:34 +0000 (11:26 -0700)]
staging: comedi: daqboard2000: use pci_ioremap_bar()

Use pci_ioremap_bar() to ioremap the PCI resources. That function
just takes the pci device and a bar number. It also has some
additional sanity checks to make sure the bar is actually a
memory resource.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agostaging: comedi: rti800: use comedi_request_region()
H Hartley Sweeten [Wed, 10 Apr 2013 17:04:54 +0000 (10:04 -0700)]
staging: comedi: rti800: use comedi_request_region()

Use comedi_request_region() to request the I/O region used by this
driver.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agostaging: comedi: acl7225b: use comedi_request_region()
H Hartley Sweeten [Wed, 10 Apr 2013 17:04:32 +0000 (10:04 -0700)]
staging: comedi: acl7225b: use comedi_request_region()

Use comedi_request_region() to request the I/O region used by this
driver.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agostaging: comedi: das1800: use __comedi_request_region()
H Hartley Sweeten [Wed, 10 Apr 2013 17:03:59 +0000 (10:03 -0700)]
staging: comedi: das1800: use __comedi_request_region()

Use __comedi_request_region() to request the additional I/O region
used by this driver.

Remove the error message when the request_region() fails,
comedi_request_reqion() will output the error message if necessary.

For aesthetic reasons, rename the local variable 'retval' to
simply 'ret'.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agostaging: comedi: ni_labpc: use comedi_request_region()
H Hartley Sweeten [Tue, 9 Apr 2013 23:34:36 +0000 (16:34 -0700)]
staging: comedi: ni_labpc: use comedi_request_region()

Use comedi_request_region() to request the I/O region used by this
driver.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agostaging: comedi: ni_labpc: only ISA boards need to request_region()
H Hartley Sweeten [Tue, 9 Apr 2013 23:34:17 +0000 (16:34 -0700)]
staging: comedi: ni_labpc: only ISA boards need to request_region()

Currently this driver calls request_region() in labpc_common_attach()
which is the common attach function for the ISA, PCMCIA, and PCI
versions of the labpc board.

The PCMCIA support is handled in a separate driver, ni_labpc_cs.
That driver sets the dev->iobase after aquiring the resource and
then just passes it to labpc_common_attach() which then sets
dev->iobase again.

The PCI support, currently in this driver, calls mite_setup() to
aquire the resource and then passes it to labpc_common_attach()
to set the dev->iobase.

The ISA support, also in this driver, passes a user supplied
configuration option to labpc_common_attach() which then does
the request_region() before setting the dev->iobase.

Move the request_region() to the ISA support code in labpc_attach()
and set the dev->iobase there before calling the common attach
code.

For the PCI support, also set the dev->iobase before calling the
common code.

This allows removing the extra parameter from labpc_common_attach().

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agostaging: comedi: ni_labpc: cleanup dev->board_name usage
H Hartley Sweeten [Tue, 9 Apr 2013 23:33:59 +0000 (16:33 -0700)]
staging: comedi: ni_labpc: cleanup dev->board_name usage

The dev->board_name is initialized by the comedi core before calling
the (*attach) or (*auto_attach) functions. It only needs to be updated
if the driver does any additional probing and changes the dev->board_ptr.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agostaging: comedi: ni_at_ao: use comedi_request_region()
H Hartley Sweeten [Tue, 9 Apr 2013 23:33:40 +0000 (16:33 -0700)]
staging: comedi: ni_at_ao: use comedi_request_region()

Use comedi_request_region() to request the I/O region used by this
driver.

Remove the board attach noise as well as the error message when the
request_region() fails, comedi_request_reqion() will output the error
message if necessary.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agostaging: comedi: ni_at_ao: cleanup dev->board_name usage
H Hartley Sweeten [Tue, 9 Apr 2013 23:33:23 +0000 (16:33 -0700)]
staging: comedi: ni_at_ao: cleanup dev->board_name usage

This legacy driver does no additional probing so the dev->board_name
will already be properly initialized by the comedi core before calling
the (*attach) function.

Remove the unnecessary initialization of dev->board_name and use it
when requesting the resources instead of the open-coded strings.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agostaging: comedi: s526: use comedi_request_region()
H Hartley Sweeten [Tue, 9 Apr 2013 23:33:04 +0000 (16:33 -0700)]
staging: comedi: s526: use comedi_request_region()

Use comedi_request_region() to request the I/O region used by this
driver.

Remove the board attach noise as well as the error message when the
request_region() fails, comedi_request_reqion() will output the error
message if necessary.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agostaging: comedi: unionxx5: refactor subdevice init
H Hartley Sweeten [Tue, 9 Apr 2013 23:32:43 +0000 (16:32 -0700)]
staging: comedi: unionxx5: refactor subdevice init

Change the parameters passed to __unioxx5_subdev_init(), we need
the comedi_device pointer to call __comedi_request_region() and
the 'minor' is only used in some kernel noise so remove it. Rename
the parameters 'subdev' and 'subdev_iobase' to simply 's' and
'iobase'.

Use __comedi_request_region() to request the I/O region needed by
the subdevice. Remove the attach noise as well as the error message
when the request_region() fails, comedi_request_reqion() will output
the error message if necessary.

Return -ENOMEM is the kzalloc fails instead of -1.

Fix unioxx5_attach() to use the new parameters to __unioxx5_subdev_init().
Pass on any error codes instead of -1.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agostaging: comedi: comedi_parport: use comedi_request_region()
H Hartley Sweeten [Tue, 9 Apr 2013 23:32:24 +0000 (16:32 -0700)]
staging: comedi: comedi_parport: use comedi_request_region()

Use comedi_request_region() to request the I/O region used by this
driver.

Remove the noise when the board is first attached as well as the
error message when the request_region() fails, comedi_request_reqion()
will output the error message if necessary.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agostaging: comedi: pcl818: use __comedi_request_region()
H Hartley Sweeten [Tue, 9 Apr 2013 23:32:03 +0000 (16:32 -0700)]
staging: comedi: pcl818: use __comedi_request_region()

Use __comedi_request_region() to request the additional I/O region
used by this driver.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agostaging: comedi: pcl816: use __comedi_request_region()
H Hartley Sweeten [Tue, 9 Apr 2013 23:31:44 +0000 (16:31 -0700)]
staging: comedi: pcl816: use __comedi_request_region()

Use __comedi_request_region() to request the additional I/O region
used by this driver.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agostaging: comedi: das16m1: use __comedi_request_region()
H Hartley Sweeten [Tue, 9 Apr 2013 23:31:07 +0000 (16:31 -0700)]
staging: comedi: das16m1: use __comedi_request_region()

Use __comedi_request_region() to request the additional I/O region
used by this driver.

Remove the error message when the request_region() fails,
comedi_request_reqion() will output the error message if necessary.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agostaging: comedi: das16: use __comedi_request_region()
H Hartley Sweeten [Tue, 9 Apr 2013 23:30:48 +0000 (16:30 -0700)]
staging: comedi: das16: use __comedi_request_region()

Use __comedi_request_region() to request the additional I/O region
used by this driver.

Remove the error message when the request_region() fails,
comedi_request_reqion() will output the error message if necessary.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agostaging: comedi: 8255: use __comedi_request_region()
H Hartley Sweeten [Tue, 9 Apr 2013 23:30:29 +0000 (16:30 -0700)]
staging: comedi: 8255: use __comedi_request_region()

Use __comedi_request_region() to request the I/O regions used by
this driver.

Remove the  error message when the request_region() fails,
comedi_request_reqion() will output the error message if necessary.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agostaging: comedi: drivers: refactor comedi_request_region()
H Hartley Sweeten [Tue, 9 Apr 2013 23:30:11 +0000 (16:30 -0700)]
staging: comedi: drivers: refactor comedi_request_region()

Split comedi_request_region() into two helper functions.

__comedi_request_region()
Handles the actual request_region() call.

comedi_request_region()
Calls __comedi_request_region() and then sets dev->iobase if the
request was successful.

This allows drivers to use the __comedi_request_region() helper
to handle the request without setting the dev->iobase.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agostaging: comedi: poc: use comedi_request_region()
H Hartley Sweeten [Tue, 9 Apr 2013 23:29:50 +0000 (16:29 -0700)]
staging: comedi: poc: use comedi_request_region()

Use comedi_request_region() to request the I/O region used by this
driver.

Remove the noise when the board is first attached as well as the
error message when the request_region() fails, comedi_request_reqion()
will output the error message if necessary.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agostaging: comedi: poc: cleanup dev->board_name usage
H Hartley Sweeten [Tue, 9 Apr 2013 23:29:29 +0000 (16:29 -0700)]
staging: comedi: poc: cleanup dev->board_name usage

This legacy driver does no additional probing so the dev->board_name
will already be properly initialized by the comedi core before calling
the (*attach) function.

Remove the unnecessary initialization of dev->board_name and use it
when requesting the resources instead of the open-coded strings.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agostaging: comedi: multiq3: use comedi_request_region()
H Hartley Sweeten [Tue, 9 Apr 2013 23:29:13 +0000 (16:29 -0700)]
staging: comedi: multiq3: use comedi_request_region()

Use comedi_request_region() to request the I/O region used by this
driver.

Remove the noise when the board is first attached as well as the
error message when the request_region() fails, comedi_request_reqion()
will output the error message if necessary.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agostaging: comedi: multiq3: remove usless comment
H Hartley Sweeten [Tue, 9 Apr 2013 23:28:52 +0000 (16:28 -0700)]
staging: comedi: multiq3: remove usless comment

Remove the comment about the configuration options. It's not
correct for this board.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agostaging: comedi: multiq3: board does not use interrupts
H Hartley Sweeten [Tue, 9 Apr 2013 23:28:35 +0000 (16:28 -0700)]
staging: comedi: multiq3: board does not use interrupts

This driver does not use interruptes. Don't bother parsing the
configuration option from "comedi_config".

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agostaging: comedi: pcmuio: use comedi_request_region()
H Hartley Sweeten [Tue, 9 Apr 2013 23:28:06 +0000 (16:28 -0700)]
staging: comedi: pcmuio: use comedi_request_region()

Use comedi_request_region() to request the I/O region used by this
driver.

Remove the noise when the board is first attached as well as the
error message when the request_region() fails, comedi_request_reqion()
will output the error message if necessary.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agostaging: comedi: pcmuio: cleanup dev->board_name usage
H Hartley Sweeten [Tue, 9 Apr 2013 23:27:44 +0000 (16:27 -0700)]
staging: comedi: pcmuio: cleanup dev->board_name usage

This legacy driver does no additional probing so the dev->board_name
will already be properly initialized by the comedi core before calling
the (*attach) function.

Remove the unnecessary initialization of dev->board_name.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agostaging: comedi: pcmmio: use comedi_request_region()
H Hartley Sweeten [Tue, 9 Apr 2013 23:27:27 +0000 (16:27 -0700)]
staging: comedi: pcmmio: use comedi_request_region()

Use comedi_request_region() to request the I/O region used by this
driver.

Remove the noise when the board is first attached as well as the
error message when the request_region() fails, comedi_request_reqion()
will output the error message if necessary.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agostaging: comedi: pcmda12: use comedi_request_region()
H Hartley Sweeten [Tue, 9 Apr 2013 23:27:03 +0000 (16:27 -0700)]
staging: comedi: pcmda12: use comedi_request_region()

Use comedi_request_region() to request the I/O region used by this
driver.

Remove the noise when the board is first attached as well as the
error message when the request_region() fails, comedi_request_reqion()
will output the error message if necessary.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agostaging: comedi: pcmad: use comedi_request_region()
H Hartley Sweeten [Tue, 9 Apr 2013 23:26:42 +0000 (16:26 -0700)]
staging: comedi: pcmad: use comedi_request_region()

Use comedi_request_region() to request the I/O region used by this
driver.

Remove the noise when the board is first attached as well as the
error message when the request_region() fails, comedi_request_reqion()
will output the error message if necessary.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agostaging: comedi: pcmad: cleanup dev->board_name usage
H Hartley Sweeten [Tue, 9 Apr 2013 23:26:22 +0000 (16:26 -0700)]
staging: comedi: pcmad: cleanup dev->board_name usage

This legacy driver does no additional probing so the dev->board_name
will already be properly initialized by the comedi core before calling
the (*attach) function.

Remove the unnecessary initialization of dev->board_name and use it
when requesting the resources instead of the open-coded strings.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agostaging: comedi: ni_atmio16d: use comedi_request_region()
H Hartley Sweeten [Tue, 9 Apr 2013 23:25:48 +0000 (16:25 -0700)]
staging: comedi: ni_atmio16d: use comedi_request_region()

Use comedi_request_region() to request the I/O region used by this
driver.

Remove the noise when the board is first attached as well as the
error message when the request_region() fails, comedi_request_reqion()
will output the error message if necessary.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agostaging: comedi: ni_atmio16d: cleanup dev->board_name usage
H Hartley Sweeten [Tue, 9 Apr 2013 23:25:25 +0000 (16:25 -0700)]
staging: comedi: ni_atmio16d: cleanup dev->board_name usage

This legacy driver does no additional probing so the dev->board_name
will already be properly initialized by the comedi core before calling
the (*attach) function.

Remove the unnecessary initialization of dev->board_name and use it
when requesting the resources instead of the open-coded strings.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agostaging: comedi: ni_atmio: use comedi_request_region()
H Hartley Sweeten [Tue, 9 Apr 2013 23:25:04 +0000 (16:25 -0700)]
staging: comedi: ni_atmio: use comedi_request_region()

Use comedi_request_region() to request the I/O region used by this
driver.

Remove the noise when the board is first attached as well as the
error message when the request_region() fails, comedi_request_reqion()
will output the error message if necessary.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agostaging: comedi: ni_at_a2150: use comedi_request_region()
H Hartley Sweeten [Tue, 9 Apr 2013 23:24:42 +0000 (16:24 -0700)]
staging: comedi: ni_at_a2150: use comedi_request_region()

Use comedi_request_region() to request the I/O region used by this
driver.

Remove the noise when the board is first attached as well as the
error message when the request_region() fails, comedi_request_reqion()
will output the error message if necessary.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agostaging: comedi: adq12b: remove need for some local variables
H Hartley Sweeten [Tue, 9 Apr 2013 23:24:20 +0000 (16:24 -0700)]
staging: comedi: adq12b: remove need for some local variables

The 'unipolar' and 'differential' local variables are not needed
in the adb12b_attach() function. Just use the cached private
data variables.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agostaging: comedi: adq12b: use comedi_request_region()
H Hartley Sweeten [Tue, 9 Apr 2013 23:23:57 +0000 (16:23 -0700)]
staging: comedi: adq12b: use comedi_request_region()

Use comedi_request_region() to request the I/O region used by this
driver.

Remove the noise when the board is first attached as well as the
error message when the request_region() fails, comedi_request_reqion()
will output the error message if necessary.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agostaging: comedi: mpc624: use comedi_request_region()
H Hartley Sweeten [Tue, 9 Apr 2013 23:23:31 +0000 (16:23 -0700)]
staging: comedi: mpc624: use comedi_request_region()

Use comedi_request_region() to request the I/O region used by this
driver.

Remove the noise when the board is first attached as well as the
error message when the request_region() fails, comedi_request_reqion()
will output the error message if necessary.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agostaging: comedi: c6xdigio: use comedi_request_region()
H Hartley Sweeten [Tue, 9 Apr 2013 23:23:11 +0000 (16:23 -0700)]
staging: comedi: c6xdigio: use comedi_request_region()

Use comedi_request_region() to request the I/O region used by this
driver.

Remove the noise when the board is first attached as well as the
error message when the request_region() fails, comedi_request_reqion()
will output the error message if necessary.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agostaging: comedi: c6xdigio: remove usless comment
H Hartley Sweeten [Tue, 9 Apr 2013 23:22:50 +0000 (16:22 -0700)]
staging: comedi: c6xdigio: remove usless comment

Remove the comment about the configuration options. It's not
correct for this board.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agostaging: comedi: c6xdigio: board does not use interrupts
H Hartley Sweeten [Tue, 9 Apr 2013 23:22:28 +0000 (16:22 -0700)]
staging: comedi: c6xdigio: board does not use interrupts

This driver does not use interruptes. Don't bother parsing the
configuration option from "comedi_config".

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agostaging: comedi: aio_iiro_16: use comedi_request_region()
H Hartley Sweeten [Tue, 9 Apr 2013 23:21:54 +0000 (16:21 -0700)]
staging: comedi: aio_iiro_16: use comedi_request_region()

Use comedi_request_region() to request the I/O region used by this
driver.

Remove the noise when the board is first attached as well as the
error message when the request_region() fails, comedi_request_reqion()
will output the error message if necessary.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agostaging: comedi: aio_aio12_8: use comedi_request_region()
H Hartley Sweeten [Tue, 9 Apr 2013 23:21:31 +0000 (16:21 -0700)]
staging: comedi: aio_aio12_8: use comedi_request_region()

Use comedi_request_region() to request the I/O region used by this
driver.

Remove the  error message when the request_region() fails,
comedi_request_reqion() will output the error message if necessary.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agostaging: comedi: aio_aio12_8: cleanup dev->board_name usage
H Hartley Sweeten [Tue, 9 Apr 2013 23:21:09 +0000 (16:21 -0700)]
staging: comedi: aio_aio12_8: cleanup dev->board_name usage

This legacy driver does no additional probing so the dev->board_name
will already be properly initialized by the comedi core before calling
the (*attach) function.

Remove the unnecessary initialization of dev->board_name.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agostaging: comedi: fl512: use comedi_request_region()
H Hartley Sweeten [Tue, 9 Apr 2013 23:20:49 +0000 (16:20 -0700)]
staging: comedi: fl512: use comedi_request_region()

Use comedi_request_region() to request the I/O region used by this
driver.

Remove the noise when the board is first attached as well as the
error message when the request_region() fails, comedi_request_reqion()
will output the error message if necessary.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agostaging: comedi: dmm32at: use comedi_request_region()
H Hartley Sweeten [Tue, 9 Apr 2013 23:20:27 +0000 (16:20 -0700)]
staging: comedi: dmm32at: use comedi_request_region()

Use comedi_request_region() to request the I/O region used by this
driver.

Remove the noise when the board is first attached as well as the
error message when the request_region() fails, comedi_request_reqion()
will output the error message if necessary.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agostaging: comedi: dt282x: use comedi_request_region()
H Hartley Sweeten [Tue, 9 Apr 2013 23:20:07 +0000 (16:20 -0700)]
staging: comedi: dt282x: use comedi_request_region()

Use comedi_request_region() to request the I/O region used by this
driver.

Remove the default iobase address (0x240) that is used when the user
does not pass a base address during the "comedi_config". Comedi
legacy drivers should only attach to a specified address.

Remove the noise when the board is first attached as well as the
error message when the request_region() fails, comedi_request_reqion()
will output the error message if necessary.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agostaging: comedi: dt282x: cleanup dev->board_name usage
H Hartley Sweeten [Tue, 9 Apr 2013 23:19:44 +0000 (16:19 -0700)]
staging: comedi: dt282x: cleanup dev->board_name usage

This legacy driver does no additional probing so the dev->board_name
will already be properly initialized by the comedi core before calling
the (*attach) function.

Remove the unnecessary initialization of dev->board_name and use it
when requesting the resources instead of the open-coded strings.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agostaging: comedi: dt2817: use comedi_request_region()
H Hartley Sweeten [Tue, 9 Apr 2013 23:19:26 +0000 (16:19 -0700)]
staging: comedi: dt2817: use comedi_request_region()

Use comedi_request_region() to request the I/O region used by this
driver.

Remove the noise when the board is first attached as well as the
error message when the request_region() fails, comedi_request_reqion()
will output the error message if necessary.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agostaging: comedi: dt2815: use comedi_request_region()
H Hartley Sweeten [Tue, 9 Apr 2013 23:19:04 +0000 (16:19 -0700)]
staging: comedi: dt2815: use comedi_request_region()

Use comedi_request_region() to request the I/O region used by this
driver.

Remove the noise when the board is first attached as well as the
error message when the request_region() fails, comedi_request_reqion()
will output the error message if necessary.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agostaging: comedi: dt2814: use comedi_request_region()
H Hartley Sweeten [Tue, 9 Apr 2013 23:18:44 +0000 (16:18 -0700)]
staging: comedi: dt2814: use comedi_request_region()

Use comedi_request_region() to request the I/O region used by this
driver.

Remove the noise when the board is first attached as well as the
error message when the request_region() fails, comedi_request_reqion()
will output the error message if necessary.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agostaging: comedi: dt2811: use comedi_request_region()
H Hartley Sweeten [Tue, 9 Apr 2013 23:18:23 +0000 (16:18 -0700)]
staging: comedi: dt2811: use comedi_request_region()

Use comedi_request_region() to request the I/O region used by this
driver.

Remove the noise when the board is first attached as well as the
error message when the request_region() fails, comedi_request_reqion()
will output the error message if necessary.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agostaging: comedi: dt2811: cleanup dev->board_name usage
H Hartley Sweeten [Tue, 9 Apr 2013 23:18:00 +0000 (16:18 -0700)]
staging: comedi: dt2811: cleanup dev->board_name usage

This legacy driver does no additional probing so the dev->board_name
will already be properly initialized by the comedi core before calling
the (*attach) function.

Remove the unnecessary initialization of dev->board_name and use it
when requesting the resources instead of the open-coded strings.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agostaging: comedi: dt2801: use comedi_request_region()
H Hartley Sweeten [Tue, 9 Apr 2013 23:17:42 +0000 (16:17 -0700)]
staging: comedi: dt2801: use comedi_request_region()

Use comedi_request_region() to request the I/O region used by this
driver.

Remove the noise when the board is first attached as well as the
error message when the request_region() fails, comedi_request_reqion()
will output the error message if necessary.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agostaging: comedi: das6402: use comedi_request_region()
H Hartley Sweeten [Tue, 9 Apr 2013 23:17:01 +0000 (16:17 -0700)]
staging: comedi: das6402: use comedi_request_region()

Use comedi_request_region() to request the I/O region used by this
driver.

Remove the default iobase address (0x300) that is used when the user
does not pass a base address during the "comedi_config". Comedi
legacy drivers should only attach to a specified address.

Remove the dev_err() message when the request_region() fails,
comedi_request_reqion() will output the error message if necessary.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agostaging: comedi: das1800: use comedi_request_region()
H Hartley Sweeten [Tue, 9 Apr 2013 23:16:42 +0000 (16:16 -0700)]
staging: comedi: das1800: use comedi_request_region()

Use comedi_request_region() to request the I/O region used by this
driver.

Remove the noise when the board is first attached as well as the
error message when the request_region() fails, comedi_request_reqion()
will output the error message if necessary.

This driver does a second request_region() for the additional I/O space
used on the 'ao' type boards. Modify the error message if that request
fails so it matches to format of the comedi_request_region() message.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agostaging: comedi: das800: use comedi_request_region()
H Hartley Sweeten [Tue, 9 Apr 2013 23:16:18 +0000 (16:16 -0700)]
staging: comedi: das800: use comedi_request_region()

Use comedi_request_region() to request the I/O region used by this
driver.

Remove the noise when the board is first attached as well as the
error message when the request_region() fails, comedi_request_reqion()
will output the error message if necessary.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agostaging: comedi: das16: use comedi_request_region()
H Hartley Sweeten [Tue, 9 Apr 2013 23:15:55 +0000 (16:15 -0700)]
staging: comedi: das16: use comedi_request_region()

Use comedi_request_region() to request the I/O region used by this
driver.

Remove the noise when the board is first attached as well as the
error message when the request_region() fails, comedi_request_reqion()
will output the error message if necessary.

This driver does a second request_region() for the I/O space needed
by the 8255 chip. Modify the error message if that request fails so
it matches to format of the comedi_request_region() message.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agostaging: comedi: das16: cleanup dev->board_name usage
H Hartley Sweeten [Tue, 9 Apr 2013 23:15:33 +0000 (16:15 -0700)]
staging: comedi: das16: cleanup dev->board_name usage

This legacy driver does no additional probing so the dev->board_name
will already be properly initialized by the comedi core before calling
the (*attach) function.

Remove the unnecessary initialization of dev->board_name and use it
when requesting the resources instead of the open-coded strings.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agostaging: comedi: das08_isa: use comedi_request_region()
H Hartley Sweeten [Tue, 9 Apr 2013 23:15:14 +0000 (16:15 -0700)]
staging: comedi: das08_isa: use comedi_request_region()

Use comedi_request_region() to request the I/O region used by this
driver.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agostaging: comedi: das16m1: use comedi_request_region()
H Hartley Sweeten [Tue, 9 Apr 2013 23:14:53 +0000 (16:14 -0700)]
staging: comedi: das16m1: use comedi_request_region()

Use comedi_request_region() to request the I/O region used by this
driver. Remove the error message when the request_region() fails,
comedi_request_reqion() will output the error message if necessary.

This driver does a second request_region() for the I/O space needed
by the 8255 chip. Modify the error message if that request fails so
it matches to format of the comedi_request_region() message.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agostaging: comedi: rti802: use comedi_request_region()
H Hartley Sweeten [Tue, 9 Apr 2013 23:14:33 +0000 (16:14 -0700)]
staging: comedi: rti802: use comedi_request_region()

Use comedi_request_region() to request the I/O region used by this
driver.

Remove the noise when the board is first attached as well as the
error message when the request_region() fails, comedi_request_reqion()
will output the error message if necessary.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agostaging: comedi: ampcl_pc263: use comedi_request_region()
H Hartley Sweeten [Tue, 9 Apr 2013 23:14:13 +0000 (16:14 -0700)]
staging: comedi: ampcl_pc263: use comedi_request_region()

Use comedi_request_region() to request the I/O region used by this
driver.

Remove the noise when the board is first attached as well as the
error message when the request_region() fails, comedi_request_reqion()
will output the error message if necessary.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agostaging: comedi: ampcl_pc236: use comedi_request_region()
H Hartley Sweeten [Tue, 9 Apr 2013 23:13:50 +0000 (16:13 -0700)]
staging: comedi: ampcl_pc236: use comedi_request_region()

Use comedi_request_region() to request the I/O region used by this
driver.

Remove the noise when the board is first attached as well as the
error message when the request_region() fails, comedi_request_reqion()
will output the error message if necessary.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agostaging: comedi: ampcl_dio200: use comedi_request_region()
H Hartley Sweeten [Tue, 9 Apr 2013 23:13:19 +0000 (16:13 -0700)]
staging: comedi: ampcl_dio200: use comedi_request_region()

Use comedi_request_region() to request the I/O region used by this
driver.

Remove the noise when the board is first attached as well as the
error message when the request_region() fails, comedi_request_reqion()
will output the error message if necessary.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agostaging: comedi: amplc_dio200: cleanup dev->board_name usage
H Hartley Sweeten [Tue, 9 Apr 2013 23:12:55 +0000 (16:12 -0700)]
staging: comedi: amplc_dio200: cleanup dev->board_name usage

This legacy driver does no additional probing so the dev->board_name
will already be properly initialized by the comedi core before calling
the (*attach) function.

Remove the unnecessary initialization of dev->board_name.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agostaging: comedi: pcl3730: use comedi_request_region()
H Hartley Sweeten [Tue, 9 Apr 2013 23:12:34 +0000 (16:12 -0700)]
staging: comedi: pcl3730: use comedi_request_region()

Use comedi_request_region() to request the I/O region used by this
driver.

Remove the noise when the board is first attached as well as the
error message when the request_region() fails, comedi_request_reqion()
will output the error message if necessary.

Also, remove the unnecessary 'dev->irq = 0'. This driver does not
use interrupts and the comedi core has already cleared this variable.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agostaging: comedi: pcl3724: use comedi_request_region()
H Hartley Sweeten [Tue, 9 Apr 2013 23:11:57 +0000 (16:11 -0700)]
staging: comedi: pcl3724: use comedi_request_region()

Use comedi_request_region() to request the I/O region used by this
driver.

Remove the noise when the board is first attached as well as the
error message when the request_region() fails, comedi_request_reqion()
will output the error message if necessary.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agostaging: comedi: pcl818: use comedi_request_region()
H Hartley Sweeten [Tue, 9 Apr 2013 23:11:31 +0000 (16:11 -0700)]
staging: comedi: pcl818: use comedi_request_region()

Use comedi_request_region() to request the I/O region used by this
driver.

Remove the noise when the board is first attached as well as the
error message when the request_region() fails, comedi_request_reqion()
will output the error message if necessary.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agostaging: comedi: pcl818: cleanup dev->board_name usage
H Hartley Sweeten [Tue, 9 Apr 2013 23:11:10 +0000 (16:11 -0700)]
staging: comedi: pcl818: cleanup dev->board_name usage

This legacy driver does no additional probing so the dev->board_name
will already be properly initialized by the comedi core before calling
the (*attach) function.

Remove the unnecessary initialization of dev->board_name and use it
when requesting the resources instead of the open-coded strings.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agostaging: comedi: pcl816: use comedi_request_region()
H Hartley Sweeten [Tue, 9 Apr 2013 23:10:53 +0000 (16:10 -0700)]
staging: comedi: pcl816: use comedi_request_region()

Use comedi_request_region() to request the I/O region used by this
driver.

Remove the noise when the board is first attached as well as the
error message when the request_region() fails, comedi_request_reqion()
will output the error message if necessary.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agostaging: comedi: pcl816: cleanup dev->board_name usage
H Hartley Sweeten [Tue, 9 Apr 2013 23:10:31 +0000 (16:10 -0700)]
staging: comedi: pcl816: cleanup dev->board_name usage

This legacy driver does no additional probing so the dev->board_name
will already be properly initialized by the comedi core before calling
the (*attach) function.

Remove the unnecessary initialization of dev->board_name and use it
when requesting the resources instead of the open-coded strings.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agostaging: comedi: pcl812: use comedi_request_region()
H Hartley Sweeten [Tue, 9 Apr 2013 23:10:12 +0000 (16:10 -0700)]
staging: comedi: pcl812: use comedi_request_region()

Use comedi_request_region() to request the I/O region used by this
driver.

Remove the noise when the board is first attached as well as the
error message when the request_region() fails, comedi_request_reqion()
will output the error message if necessary.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agostaging: comedi: pcl812: cleanup dev->board_name usage
H Hartley Sweeten [Tue, 9 Apr 2013 23:09:49 +0000 (16:09 -0700)]
staging: comedi: pcl812: cleanup dev->board_name usage

This legacy driver does no additional probing so the dev->board_name
will already be properly initialized by the comedi core before calling
the (*attach) function.

Remove the unnecessary initialization of dev->board_name and use it
when requesting the resources instead of the open-coded strings.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agostaging: comedi: pcl730: use comedi_request_region()
H Hartley Sweeten [Tue, 9 Apr 2013 23:09:32 +0000 (16:09 -0700)]
staging: comedi: pcl730: use comedi_request_region()

Use comedi_request_region() to request the I/O region used by this
driver.

Remove the noise when the board is first attached as well as the
error message when the request_region() fails, comedi_request_reqion()
will output the error message if necessary.

Also, remove the unnecessary 'dev->irq = 0'. This driver does not
use interrupts and the comedi core has already cleared this variable.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agostaging: comedi: pcl730: cleanup dev->board_name usage
H Hartley Sweeten [Tue, 9 Apr 2013 23:09:10 +0000 (16:09 -0700)]
staging: comedi: pcl730: cleanup dev->board_name usage

This legacy driver does no additional probing so the dev->board_name
will already be properly initialized by the comedi core before calling
the (*attach) function.

Remove the unnecessary initialization of dev->board_name and use it
when requesting the resources instead of the open-coded strings.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agostaging: comedi: pcl726: use comedi_request_region()
H Hartley Sweeten [Tue, 9 Apr 2013 23:08:44 +0000 (16:08 -0700)]
staging: comedi: pcl726: use comedi_request_region()

Use comedi_request_region() to request the I/O region used by this
driver.

Remove the noise when the board is first attached as well as the
error message when the request_region() fails, comedi_request_reqion()
will output the error message if necessary.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agostaging: comedi: pcl726: cleanup dev->board_name usage
H Hartley Sweeten [Tue, 9 Apr 2013 23:08:22 +0000 (16:08 -0700)]
staging: comedi: pcl726: cleanup dev->board_name usage

This legacy driver does no additional probing so the dev->board_name
will already be properly initialized by the comedi core before calling
the (*attach) function.

Remove the unnecessary initialization of dev->board_name and use it
when requesting the resources instead of the open-coded strings.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agostaging: comedi: pcl725: use comedi_request_region()
H Hartley Sweeten [Tue, 9 Apr 2013 23:08:03 +0000 (16:08 -0700)]
staging: comedi: pcl725: use comedi_request_region()

Use comedi_request_region() to request the I/O region used by this
driver.

Remove the noise when the board is first attached as well as the
error message when the request_region() fails, comedi_request_reqion()
will output the error message if necessary.

Also, remove the unnecessary 'dev->irq = 0'. This driver does not
use interrupts and the comedi core has already cleared this variable.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agostaging: comedi: pcl724: use comedi_request_region()
H Hartley Sweeten [Tue, 9 Apr 2013 23:07:43 +0000 (16:07 -0700)]
staging: comedi: pcl724: use comedi_request_region()

Use comedi_request_region() to request the I/O region used by this
driver.

Remove the noise when the board is first attached as well as the
error message when the request_region() fails, comedi_request_reqion()
will output the error message if necessary.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agostaging: comedi: pcl724: cleanup dev->board_name usage
H Hartley Sweeten [Tue, 9 Apr 2013 23:07:16 +0000 (16:07 -0700)]
staging: comedi: pcl724: cleanup dev->board_name usage

This legacy driver does no additional probing so the dev->board_name
will already be properly initialized by the comedi core before calling
the (*attach) function.

Remove the unnecessary initialization of dev->board_name and use it
when requesting the resources instead of the open-coded strings.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agostaging: comedi: pcl711: use comedi_request_region()
H Hartley Sweeten [Tue, 9 Apr 2013 23:06:58 +0000 (16:06 -0700)]
staging: comedi: pcl711: use comedi_request_region()

Use comedi_request_region() to request the I/O region used by this
driver.

Remove the noise when the board is first attached as well as the
error message when the request_region() fails, comedi_request_reqion()
will output the error message if necessary.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agostaging: comedi: pcl711: cleanup dev->board_name usage
H Hartley Sweeten [Tue, 9 Apr 2013 23:06:31 +0000 (16:06 -0700)]
staging: comedi: pcl711: cleanup dev->board_name usage

This legacy driver does no additional probing so the dev->board_name
will already be properly initialized by the comedi core before calling
the (*attach) function.

Remove the unnecessary initialization of dev->board_name and use it
when requesting the resources instead of the open-coded strings.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agostaging: comedi: drivers: introduce comedi_request_region()
H Hartley Sweeten [Tue, 9 Apr 2013 23:05:54 +0000 (16:05 -0700)]
staging: comedi: drivers: introduce comedi_request_region()

Introduce a helper function to handle the request_region() for legacy
comedi drivers.

As pointed out by Ian Abbott, legacy devices are configured manually
with the "comedi_config" program. The error messages are useful
diagnostics when trying to attach to these boards.

Providing a helper function allows consolidating the error messages
in the drivers and providing a consistent format for the errors.

This helper also sets the dev->iobase automatically for the driver
if the request_region() is successful.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agostaging: android: binder: replace IOCTL types with user-exportable types
Serban Constantinescu [Tue, 9 Apr 2013 10:00:52 +0000 (11:00 +0100)]
staging: android: binder: replace IOCTL types with user-exportable types

This patch modifies the IOCTL macros to use user-exportable data types,
as they are the referred kernel types for the user/kernel interface.

The patch does not change in any way the functionality of the binder driver.

Signed-off-by: Serban Constantinescu <serban.constantinescu@arm.com>
Acked-by: Arve Hjønnevåg <arve@android.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
11 years agostaging: dwc2: toggle periodic debugging output separately
Matthijs Kooijman [Wed, 10 Apr 2013 07:55:50 +0000 (09:55 +0200)]
staging: dwc2: toggle periodic debugging output separately

This adds a config option USB_DWC2_DEBUG_PERIODIC that allows debugging
output be suppressed for periodic transfers. This helps when debugging
non-periodic transfers while there are also periodic transfers going on
(both to make the debug output less polluted and to prevent all CPU time
going to debug messages).

In addition, a debug message from dwc2_hcd_is_status_changed is removed
entirely, since it often floods the log regardless of periodic
transfers.

Signed-off-by: Matthijs Kooijman <matthijs@stdin.nl>
Cc: Paul Zimmerman <Paul.Zimmerman@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>