Vabhav Sharma [Tue, 14 Dec 2021 09:32:39 +0000 (03:32 -0600)]
arm64: dts: ls1028a-qds: enable lpuart1
LPUART nodes by default are disabled in LS1028A device
tree, Enabling LPUART1 node.
Signed-off-by: Vabhav Sharma <vabhav.sharma@nxp.com>
Acked-by: Fugang Duan <fugang.duan@nxp.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Biwen Li [Tue, 14 Dec 2021 09:32:38 +0000 (03:32 -0600)]
arm64: dts: ls1028a-qds: move rtc node to the correct i2c bus
The i2c rtc is on i2c2 bus not i2c1 bus, so fix it in dts.
Signed-off-by: Biwen Li <biwen.li@nxp.com>
Signed-off-by: Li Yang <leoyang.lil@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Biwen Li [Tue, 14 Dec 2021 09:32:37 +0000 (03:32 -0600)]
arm64: dts: ls1028a-rdb: enable pwm0
Enable pwm0 on ls1028a-rdb board which uses flextimer1.
Signed-off-by: Biwen Li <biwen.li@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Biwen Li [Tue, 14 Dec 2021 09:32:35 +0000 (03:32 -0600)]
arm64: dts: ls1028a: add flextimer based pwm nodes
Add pwm nodes using flextimer controller.
Signed-off-by: Biwen Li <biwen.li@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Biwen Li [Tue, 14 Dec 2021 09:32:34 +0000 (03:32 -0600)]
arm64: dts: ls1028a: add ftm_alarm1 node to be used as wakeup source
Add flextimer2 based ftm_alarm1 node and enable it to be the default rtc
wakeup source for rdb and qds boards instead of the original flextimer1
which is used by PWM. The ftm_alarm0 node hence is disabled by default.
Signed-off-by: Biwen Li <biwen.li@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Xiaowei Bao [Tue, 14 Dec 2021 09:32:33 +0000 (03:32 -0600)]
arm64: dts: ls1028a: Add PCIe EP nodes
Add PCIe EP nodes for ls1028a to support EP mode.
Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Biwen Li [Tue, 14 Dec 2021 07:23:42 +0000 (01:23 -0600)]
arm64: dts: lx2162a-qds: add interrupt line for RTC node
Add interrupt line for RTC node on lx2162a-qds
Signed-off-by: Biwen Li <biwen.li@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Yangbo Lu [Tue, 14 Dec 2021 07:23:41 +0000 (01:23 -0600)]
arm64: dts: lx2162a-qds: support SD UHS-I and eMMC HS400 modes
The default NXP SDHC adapter cards for LX2162AQDS are SD 2.0/3.0
adapter card for eSDHC1, and eMMC 5.1 adapter card for eSDHC2.
Add speed modes properties supported by the two adapters in device
tree node.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Ran Wang [Tue, 14 Dec 2021 07:23:40 +0000 (01:23 -0600)]
arm64: dts: lx2160a: enable usb3-lpm-capable for usb3 nodes
Enable USB3 HW LPM feature for lx2160a.
Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Pankaj Bansal [Tue, 14 Dec 2021 07:23:36 +0000 (01:23 -0600)]
arm64: dts: lx2160a-qds: Add mdio mux nodes
The two external MDIO buses used to communicate with phy devices that
are external to SOC are muxed in LX2160AQDS board. These buses can be
routed to any one of the eight IO slots on LX2160AQDS board depending on
value in fpga register 0x54. Additionally the external MDIO1 is used to
communicate to the onboard RGMII phy devices. The mdio1 is controlled
by bits 4-7 of fpga register and mdio2 is controlled by bits 4-7 of fpga
register.
Signed-off-by: Pankaj Bansal <pankaj.bansal@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Pankaj Gupta [Tue, 14 Dec 2021 07:23:35 +0000 (01:23 -0600)]
arm64: dts: lx2160a: add optee-tz node
Disabled by default in SoC dtsi and enables in board dts files.
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Ioana Radulescu [Tue, 14 Dec 2021 07:23:34 +0000 (01:23 -0600)]
arm64: dts: lx2160a-rdb: Add Inphi PHY node
DPMAC5 and DPMAC6 are connected to 25G Inphi PHY
Signed-off-by: Vicentiu Galanopulo <vicentiu.galanopulo@nxp.com>
Signed-off-by: Florin Chiculita <florinlaurentiu.chiculita@nxp.com>
Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Lucas Stach [Mon, 13 Dec 2021 20:40:47 +0000 (21:40 +0100)]
arm64: dts: imx8mm: don't assign PLL2 in SoC dtsi
The base i.MX8MM dtsi changes the audio PLL2 rate, which gets in the
way if it should be used for anything else than audio. As this PLL doesn't
seem to be used by any upstream supported board, just remove the rate
configuration to allow boards to set it up as they wish.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Lucas Stach [Sun, 12 Dec 2021 13:49:12 +0000 (14:49 +0100)]
arm64: dts: nitrogen8-som: correct i2c1 pad-ctrl
The slew rate and drive-strength of the i2c1 pads were much too
high. Bring them down to avoid signal quality issues.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Lucas Stach [Sat, 11 Dec 2021 22:17:43 +0000 (23:17 +0100)]
arm64: dts: nitrogen8-som: correct network PHY reset
Add the missing reset-gpios property to allow Linux to fully reset
the network PHY and fix the pinmux to add the neccessary pull-ups
for the PHY strap configuration.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Ariel D'Alessandro [Fri, 10 Dec 2021 13:23:17 +0000 (10:23 -0300)]
arm64: dts: imx8mn-bsh-smm-s2/pro: Add iMX8MN BSH SMM S2 boards
Introduce BSH SystemMaster (SMM) S2 board family, which consists of:
iMX8MN SMM S2 and iMX8MN SMM S2 PRO boards.
Add support for iMX8MN BSH SMM S2 board:
- 256 MiB DDR3 RAM
- 512 MiB NAND
- Megabit Ethernet PHY
- Wi-Fi 802.11 a/b/g/n/ac with Bluetooth 5.0
- USB-OTG (peripheral mode)
Add support for iMX8MN BSH SMM S2 PRO board:
- 512 MiB DDR3 RAM
- 8 GiB eMMC
- Megabit Ethernet PHY
- Wi-Fi 802.11 a/b/g/n/ac with Bluetooth 5.0
- USB-OTG (peripheral mode)
Signed-off-by: Ariel D'Alessandro <ariel.dalessandro@collabora.com>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Fabio Estevam [Wed, 8 Dec 2021 19:52:45 +0000 (16:52 -0300)]
arm64: dts: imx8mm/n: Remove the 'pm-ignore-notify' property
The 'pm-ignore-notify' property is not a valid property and there is
no documentation for it.
Drop such invalid property.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Peng Fan [Wed, 8 Dec 2021 13:17:55 +0000 (21:17 +0800)]
arm64: dts: imx8ulp: add power domain entry for usdhc
Add power domain for USDHC node.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Peng Fan [Wed, 8 Dec 2021 13:17:54 +0000 (21:17 +0800)]
arm64: dts: imx8ulp: add scmi firmware node
i.MX8ULP use scmi firmware based power domain and sensor support.
So add the firmware node and the sram it uses.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Peng Fan [Wed, 8 Dec 2021 13:17:53 +0000 (21:17 +0800)]
dt-bindings: power: imx8ulp: add power domain header file
Add i.MX8ULP power domain header file
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Adam Ford [Sun, 5 Dec 2021 21:01:43 +0000 (15:01 -0600)]
arm64: dts: imx8mq-evk: link regulator to VPU domain
The SW1C regulator powers the VPU and the state isn't guaranteed
to always be on. Link the VPU power-domain to the regulator to
ensure it is turned on before using the power domain.
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Li Yang [Sat, 4 Dec 2021 01:15:37 +0000 (19:15 -0600)]
arm64: dts: ls1088a: add snps incr burst type adjustment for usb1
This property could fix the defect that external usb device
always prints this error log --- 'reset SuperSpeed USB device number n
using xhci_hcd' when system power on.
Signed-off-by: Pengbo Mu <pengbo.mu@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Li Yang [Sat, 4 Dec 2021 01:15:36 +0000 (19:15 -0600)]
arm64: dts: ls1088a: Add reboot nodes
ls1088a has a separate reset register block. Define it in dts and use
it for reboot.
Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Vladimir Oltean [Thu, 2 Dec 2021 14:15:28 +0000 (16:15 +0200)]
arm64: dts: ls1028a-rdb: update copyright
Company policy requires that copyright is updated when a file is
touched. Keeping the copyright change separate to reduce the noise in
other patches.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Vladimir Oltean [Thu, 2 Dec 2021 14:15:27 +0000 (16:15 +0200)]
arm64: dts: ls1028a-rdb: add aliases for the Ethernet ports
These are used by U-Boot, and are required for keeping the device trees
in sync.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Vladimir Oltean [Thu, 2 Dec 2021 14:15:26 +0000 (16:15 +0200)]
arm64: dts: ls1028a-rdb: add an alias for the FlexSPI controller
This is used by U-Boot and is required for keeping the device trees in
sync.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Vladimir Oltean [Thu, 2 Dec 2021 14:15:25 +0000 (16:15 +0200)]
arm64: dts: ls1028a-rdb: sort nodes alphabetically by label
In preparation for this board's device tree synchronization with U-Boot,
we must find a common node ordering pattern. Alphabetical sounds about
right.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Joakim Zhang [Tue, 23 Nov 2021 08:05:06 +0000 (16:05 +0800)]
arm64: dts: imx8mp: add mac address for EQOS
Add mac address in efuse, so that EQOS driver can parse it from nvmem
cell.
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Joakim Zhang [Tue, 23 Nov 2021 08:05:05 +0000 (16:05 +0800)]
arm64: dts: imx8m: remove unused "nvmem_macaddr_swap" property for FEC
Remove unused "nvmem_macaddr_swap" property for FEC, there is no info in both
dt-binding and driver, so it's safe to remove it.
Reviewed-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Joakim Zhang [Tue, 23 Nov 2021 08:05:04 +0000 (16:05 +0800)]
arm64: dts: imx8mp-evk: disable CLKOUT clock for ENET PHY
According to commit
0a4355c2b7f8 ("net: phy: realtek: add dt property to
disable CLKOUT clock"), diable CLKOUT clock for FEC PHY to save power on
i.MX8MP EVK board.
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Joakim Zhang [Tue, 23 Nov 2021 08:05:03 +0000 (16:05 +0800)]
arm64: dts: imx8m: configure FEC PHY VDDIO voltage
As commit
2f664823a470 ("net: phy: at803x: add device tree binding")
described, configure FEC PHY VDDIO voltage according to board design.
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Joakim Zhang [Tue, 23 Nov 2021 08:05:02 +0000 (16:05 +0800)]
arm64: dts: imx8m: disable smart eee for FEC PHY
As commit
390b4cad8148 ("net: phy: at803x: add support for configuring SmartEEE")
described, disable PHY smart eee by default.
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Joakim Zhang [Tue, 23 Nov 2021 08:05:01 +0000 (16:05 +0800)]
arm64: dts: imx8mp-evk: add hardware reset for EQOS PHY
As commit
798a1807ab13 ("arm64: dts: imx8mp-evk: Improve the Ethernet PHY
description") described, add hardware reset for EQOS PHY.
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Joakim Zhang [Tue, 23 Nov 2021 08:05:00 +0000 (16:05 +0800)]
arm64: dts: imx8mn-evk: add hardware reset for FEC PHY
Add hardware reset for FEC PHY.
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Reviewed-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Alexander Stein [Wed, 1 Dec 2021 07:29:48 +0000 (08:29 +0100)]
arm64: dts: freescale: add initial device tree for TQMa8Mx with i.MX8M
This adds support for TQMa8Mx module on MBa8Mx board.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Alexander Stein [Wed, 1 Dec 2021 07:29:46 +0000 (08:29 +0100)]
arm64: dts: freescale: add initial device tree for TQMa8MQNL with i.MX8MN
This adds support for TQMa8MQNL module on MBa8Mx board.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Alexander Stein [Wed, 1 Dec 2021 07:29:43 +0000 (08:29 +0100)]
arm64: dts: freescale: add initial device tree for TQMa8MQML with i.MX8MM
This adds support for TQMa8MQML module on MBa8Mx board.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Jacky Bai [Fri, 26 Nov 2021 07:40:02 +0000 (15:40 +0800)]
arm64: dts: imx8ulp: Add the basic dts for imx8ulp evk board
Add the basic dts file for i.MX8ULP EVK board.
Only the necessary devices for minimal system boot up are enabled:
enet, emmc, usb, console uart.
some of the devices' pin status may lost during low power mode,
so additional sleep pinctrl properties are included by default.
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Jacky Bai [Fri, 26 Nov 2021 07:40:01 +0000 (15:40 +0800)]
arm64: dts: imx8ulp: Add the basic dtsi file for imx8ulp
Add the basic dtsi support for i.MX8ULP.
i.MX 8ULP is part of the ULP family with emphasis on extreme
low-power techniques using the 28 nm fully depleted silicon on
insulator process. Like i.MX 7ULP, i.MX 8ULP continues to be
based on asymmetric architecture, however will add a third DSP
domain for advanced voice/audio capability and a Graphics domain
where it is possible to access graphics resources from the
application side or the realtime side.
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Adam Ford [Sun, 28 Nov 2021 12:50:10 +0000 (06:50 -0600)]
arm64: dts: imx8mm-beacon: Enable OV5640 Camera
The baseboard has support for a TDNext 5640 Camera which
uses an OV5640 connected to a 2-lane CSI2 interface.
With the CSI and mipi_csi2 drivers pointing to an OV5640 camera, the media
pipeline can be configured with the following:
media-ctl --links "'ov5640 1-003c':0->'imx7-mipi-csis.0':0[1]"
The camera and various nodes in the pipeline can be configured for UYVY:
media-ctl -v -V "'ov5640 1-003c':0 [fmt:UYVY8_1X16/640x480 field:none]"
media-ctl -v -V "'csi':0 [fmt:UYVY8_1X16/640x480 field:none]"
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Adam Ford [Sun, 28 Nov 2021 12:50:08 +0000 (06:50 -0600)]
arm64: dts: imx8mm: Add CSI nodes
There is a csi bridge and csis interface that tie together
to allow csi2 capture.
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tim Harvey <tharvey@gateworks.com>
Tested-by: Tim Harvey <tharvey@gateworks.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
David Heidelberg [Sat, 27 Nov 2021 13:01:18 +0000 (14:01 +0100)]
arm64: dts: imx8mq: fix the schema check errors for fsl,tmu-calibration
fsl,tmu-calibration is in u32-matrix. Use matching property syntax.
No functional changes. Fixes warnings as:
$ make dtbs_check
...
arch/arm64/boot/dts/freescale/imx8mq-librem5-r3.dt.yaml: tmu@
30260000: \
fsl,tmu-calibration:0: Additional items are not allowed (1, 41, 2, 47, \
3, 53, 4, 61, 5, 67, 6, 75, 7, 81, 8, 87, 9, 95, 10, 103, 11, 111, 65536, \
27, 65537, 35, 65538, 43, 65539, 51, 65540, 59, 65541, 67, 65542, 75, \
65543, 85, 65544, 93, 65545, 103, 65546, 112, 131072, 23, 131073, 35, \
131074, 45, 131075, 55, 131076, 65, 131077, 75, 131078, 87, 131079, 99, \
131080, 111, 196608, 21, 196609, 33, 196610, 45, 196611, 57, 196612, 69, \
196613, 83, 196614, 95, 196615, 113 were unexpected)
From schema: Documentation/devicetree/bindings/thermal/qoriq-thermal.yaml
...
Signed-off-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Kuldeep Singh [Wed, 24 Nov 2021 09:02:14 +0000 (14:32 +0530)]
arm64: dts: lx2162a: Add CAN nodes for LX2162A-QDS
Enable CAN support for LX2162A-QDS in board dts.
Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Peng Fan [Fri, 12 Nov 2021 06:26:04 +0000 (14:26 +0800)]
arm64: dts: imx8qxp: add cache info
i.MX8QXP A35 Cluster has 32KB Icache, 32KB Dcache and 512KB L2 Cache
- Icache is 2-way set associative
- Dcache is 4-way set associative
- L2cache is 8-way set associative
- Line size are 64bytes
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Peng Fan [Fri, 12 Nov 2021 06:26:03 +0000 (14:26 +0800)]
arm64: dts: imx8qm: add cache info
i.MX8QM A53 Cluster has 32KB Icache, 32KB Dcache and 1MB L2 Cache
- Icache is 2-way set associative
- Dcache is 4-way set associative
- L2cache is 16-way set associative
- Line size are 64bytes
A72 Cluster has 48KB Icache, 32KB Dcache and 1MB L2 Cache
- ICache is 3-way set-associative
- Dcache is 2-way set-associative
- L2Cache is 16-way set-associative
- Line size are 64bytes
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Peng Fan [Fri, 12 Nov 2021 06:26:02 +0000 (14:26 +0800)]
arm64: dts: imx8m: add cache info
i.MX8M Family use A53 Cores and has 32KB ICache with 32KB DCache.
- Icache is 2-way set associative
- Dcache is 4-way set associative
- L2cache is 16-way set associative
- Line size are 64bytes
Except i.MX8MQ has 1MB L2 Cache, others has 512KB L2 Cache.
So add the cache info in device tree and let use could see that
from /sys/devices/system/cpu/cpu[x]/cache/
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Martin Kepplinger [Thu, 4 Nov 2021 13:22:13 +0000 (14:22 +0100)]
arm64: dts: imx8mq-librem5-r3.dtsi: describe selfie cam XSHUTDOWN pin
The r3 and later revisions of the Librem 5 phone include an additional switch
to control the hi846 XSHUTDOWN pin. Describe it.
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Martin Kepplinger [Thu, 4 Nov 2021 13:22:12 +0000 (14:22 +0100)]
arm64: dts: imx8mq-librem5: describe the selfie cam
Enable the CSI1 MIPI RX controller and CSI1 bridge on the SoC. Describe
the Librem 5 front-facing camera, connected to the CSI1 MIPI.
the following sets formats, streams 10 frames and saves one:
#!/bin/bash
WIDTH=1632
HEIGHT=1224
SKIP=10
media-ctl -d "platform:
30a90000.csi" --set-v4l2 "'csi':0 [fmt:SGBRG10/${WIDTH}x${HEIGHT} colorspace:raw]"
media-ctl -d "platform:
30a90000.csi" --set-v4l2 "'imx8mq-mipi-csi2
30a70000.csi':0 [fmt:SGBRG10/${WIDTH}x${HEIGHT} colorspace:raw]"
media-ctl -d "platform:
30a90000.csi" --set-v4l2 "'hi846 2-0020':0 [fmt:SGBRG10/${WIDTH}x${HEIGHT} colorspace:raw]"
media-ctl -d "platform:
30a90000.csi" -l "'hi846 2-0020':0 -> 'imx8mq-mipi-csi2
30a70000.csi':0 [1]"
v4l2-ctl -d "/dev/v4l/by-path/platform-
30a90000.csi-video-index0" --set-fmt-video=width=${WIDTH},height=${HEIGHT},pixelformat=GB16 --stream-mmap --stream-to=$WIDTH.raw --stream-skip=$SKIP --stream-count=1
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Martin Kepplinger [Thu, 4 Nov 2021 13:22:11 +0000 (14:22 +0100)]
arm64: dts: imx8mq-librem5: describe power supply for cameras
CAMERA_PWR_EN controls two different power supplies that cameras will use.
The hardware killswitch controls a third one. Describe that appropriately.
The pinctrl that describes the gpio that is used in 2 places here is added
to the pmic. This is done because pmic is powered early enough to make
sure this will work.
When we would have put the same pinctrl property into the 2 regulator nodes
(instead of the pmic), we'd get:
imx8mq-pinctrl
30330000.pinctrl: pin MX8MQ_IOMUXC_GPIO1_IO00 already requested by regulator-csi-1v8; cannot claim for regulator-vcam-2v8
imx8mq-pinctrl
30330000.pinctrl: pin-10 (regulator-vcam-2v8) status -22
imx8mq-pinctrl
30330000.pinctrl: could not request pin 10 (MX8MQ_IOMUXC_GPIO1_IO00) from group camerapwrgrp on device
30330000.pinctrl
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Martin Kepplinger [Thu, 4 Nov 2021 13:22:10 +0000 (14:22 +0100)]
arm64: dts: split out a shared imx8mq-librem5-r3.dtsi description
The Librem 5 r3 ("Dogwood") and r4 ("Evergreen") revisions are quite
similar. Add a shared imx8mq-librem5-r3.dtsi description to be included
in r3 and later dts files in order to avoid duplication.
This is no change in the descriptions but only refactoring.
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Adam Ford [Thu, 4 Nov 2021 12:34:11 +0000 (07:34 -0500)]
arm64: dts: imx8mm-beacon: Enable USB Controllers
The i.MX8M Mini has two available USB controllers. On the
imx8mm-beacon board, USB1 is routed to a mini-USB port with
OTG functionality. USB2 is routed to a USB hub which has
three host-only ports connected to it.
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Meng Li [Wed, 3 Nov 2021 03:38:38 +0000 (11:38 +0800)]
arm64: dts: fsl-ls1043a-rdb: add delay between CS and CLK signal for flash device
Based on commit
d59c90a2400f("spi: spi-fsl-dspi: Convert
TCFQ users to XSPI FIFO mode ") and
6c1c26ecd9a3("spi:
spi-fsl-dspi: Accelerate transfers using larger word size if possible"),
on ls1043a-rdb platform, the spi work mode is changed from TCFQ
mode to XSPI mode. In order to keep the transmission sequence matches
with flash device, it is need to add delay between CS and CLK signal.
The strategy of generating delay value refers to QorIQ LS1043A
Reference Manual.
Signed-off-by: Meng Li <Meng.Li@windriver.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Geert Uytterhoeven [Mon, 18 Oct 2021 13:59:02 +0000 (15:59 +0200)]
arm64: dts: imx: imx8mn-beacon: Drop undocumented clock-names reference
The wlf,wm8962 Device Tree bindings do not specify a clock-names
property. Drop it.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Arnaud Ferraris [Sat, 16 Oct 2021 10:20:23 +0000 (12:20 +0200)]
arm64: dts: freescale: add 'chassis-type' property
A new 'chassis-type' root node property has recently been approved for
the device-tree specification, in order to provide a simple way for
userspace to detect the device form factor and adjust their behavior
accordingly.
This patch fills in this property for end-user devices (such as laptops,
smartphones and tablets) based on NXP ARM64 processors.
Signed-off-by: Arnaud Ferraris <arnaud.ferraris@collabora.com>
Reviewed-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Linus Torvalds [Sun, 14 Nov 2021 21:56:52 +0000 (13:56 -0800)]
Linux 5.16-rc1
Gustavo A. R. Silva [Sun, 14 Nov 2021 00:57:25 +0000 (18:57 -0600)]
kconfig: Add support for -Wimplicit-fallthrough
Add Kconfig support for -Wimplicit-fallthrough for both GCC and Clang.
The compiler option is under configuration CC_IMPLICIT_FALLTHROUGH,
which is enabled by default.
Special thanks to Nathan Chancellor who fixed the Clang bug[1][2]. This
bugfix only appears in Clang 14.0.0, so older versions still contain
the bug and -Wimplicit-fallthrough won't be enabled for them, for now.
This concludes a long journey and now we are finally getting rid
of the unintentional fallthrough bug-class in the kernel, entirely. :)
Link: https://github.com/llvm/llvm-project/commit/9ed4a94d6451046a51ef393cd62f00710820a7e8
Link: https://bugs.llvm.org/show_bug.cgi?id=51094
Link: https://github.com/KSPP/linux/issues/115
Link: https://github.com/ClangBuiltLinux/linux/issues/236
Co-developed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Co-developed-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sun, 14 Nov 2021 20:18:22 +0000 (12:18 -0800)]
Merge tag 'xfs-5.16-merge-5' of git://git./fs/xfs/xfs-linux
Pull xfs cleanups from Darrick Wong:
"The most 'exciting' aspect of this branch is that the xfsprogs
maintainer and I have worked through the last of the code
discrepancies between kernel and userspace libxfs such that there are
no code differences between the two except for #includes.
IOWs, diff suffices to demonstrate that the userspace tools behave the
same as the kernel, and kernel-only bits are clearly marked in the
/kernel/ source code instead of just the userspace source.
Summary:
- Clean up open-coded swap() calls.
- A little bit of #ifdef golf to complete the reunification of the
kernel and userspace libxfs source code"
* tag 'xfs-5.16-merge-5' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: sync xfs_btree_split macros with userspace libxfs
xfs: #ifdef out perag code for userspace
xfs: use swap() to make dabtree code cleaner
Linus Torvalds [Sun, 14 Nov 2021 19:53:59 +0000 (11:53 -0800)]
Merge tag 'for-5.16/parisc-3' of git://git./linux/kernel/git/deller/parisc-linux
Pull more parisc fixes from Helge Deller:
"Fix a build error in stracktrace.c, fix resolving of addresses to
function names in backtraces, fix single-stepping in assembly code and
flush userspace pte's when using set_pte_at()"
* tag 'for-5.16/parisc-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc/entry: fix trace test in syscall exit path
parisc: Flush kernel data mapping in set_pte_at() when installing pte for user page
parisc: Fix implicit declaration of function '__kernel_text_address'
parisc: Fix backtrace to always include init funtion names
Linus Torvalds [Sun, 14 Nov 2021 19:37:49 +0000 (11:37 -0800)]
Merge tag 'sh-for-5.16' of git://git.libc.org/linux-sh
Pull arch/sh updates from Rich Felker.
* tag 'sh-for-5.16' of git://git.libc.org/linux-sh:
sh: pgtable-3level: Fix cast to pointer from integer of different size
sh: fix READ/WRITE redefinition warnings
sh: define __BIG_ENDIAN for math-emu
sh: math-emu: drop unused functions
sh: fix kconfig unmet dependency warning for FRAME_POINTER
sh: Cleanup about SPARSE_IRQ
sh: kdump: add some attribute to function
maple: fix wrong return value of maple_bus_init().
sh: boot: avoid unneeded rebuilds under arch/sh/boot/compressed/
sh: boot: add intermediate vmlinux.bin* to targets instead of extra-y
sh: boards: Fix the cacography in irq.c
sh: check return code of request_irq
sh: fix trivial misannotations
Linus Torvalds [Sun, 14 Nov 2021 19:30:50 +0000 (11:30 -0800)]
Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm
Pull ARM fixes from Russell King:
- Fix early_iounmap
- Drop cc-option fallbacks for architecture selection
* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: 9156/1: drop cc-option fallbacks for architecture selection
ARM: 9155/1: fix early early_iounmap()
Linus Torvalds [Sun, 14 Nov 2021 19:11:51 +0000 (11:11 -0800)]
Merge tag 'devicetree-fixes-for-5.16-1' of git://git./linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring:
- Two fixes due to DT node name changes on Arm, Ltd. boards
- Treewide rename of Ingenic CGU headers
- Update ST email addresses
- Remove Netlogic DT bindings
- Dropping few more cases of redundant 'maxItems' in schemas
- Convert toshiba,tc358767 bridge binding to schema
* tag 'devicetree-fixes-for-5.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: watchdog: sunxi: fix error in schema
bindings: media: venus: Drop redundant maxItems for power-domain-names
dt-bindings: Remove Netlogic bindings
clk: versatile: clk-icst: Ensure clock names are unique
of: Support using 'mask' in making device bus id
dt-bindings: treewide: Update @st.com email address to @foss.st.com
dt-bindings: media: Update maintainers for st,stm32-hwspinlock.yaml
dt-bindings: media: Update maintainers for st,stm32-cec.yaml
dt-bindings: mfd: timers: Update maintainers for st,stm32-timers
dt-bindings: timer: Update maintainers for st,stm32-timer
dt-bindings: i2c: imx: hardware do not restrict clock-frequency to only 100 and 400 kHz
dt-bindings: display: bridge: Convert toshiba,tc358767.txt to yaml
dt-bindings: Rename Ingenic CGU headers to ingenic,*.h
Linus Torvalds [Sun, 14 Nov 2021 18:43:38 +0000 (10:43 -0800)]
Merge tag 'timers-urgent-2021-11-14' of git://git./linux/kernel/git/tip/tip
Pull timer fix from Thomas Gleixner:
"A single fix for POSIX CPU timers to address a problem where POSIX CPU
timer delivery stops working for a new child task because
copy_process() copies state information which is only valid for the
parent task"
* tag 'timers-urgent-2021-11-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
posix-cpu-timers: Clear task::posix_cputimers_work in copy_process()
Linus Torvalds [Sun, 14 Nov 2021 18:38:27 +0000 (10:38 -0800)]
Merge tag 'irq-urgent-2021-11-14' of git://git./linux/kernel/git/tip/tip
Pull irq fixes from Thomas Gleixner:
"A set of fixes for the interrupt subsystem
Core code:
- A regression fix for the Open Firmware interrupt mapping code where
a interrupt controller property in a node caused a map property in
the same node to be ignored.
Interrupt chip drivers:
- Workaround a limitation in SiFive PLIC interrupt chip which
silently ignores an EOI when the interrupt line is masked.
- Provide the missing mask/unmask implementation for the CSKY MP
interrupt controller.
PCI/MSI:
- Prevent a use after free when PCI/MSI interrupts are released by
destroying the sysfs entries before freeing the memory which is
accessed in the sysfs show() function.
- Implement a mask quirk for the Nvidia ION AHCI chip which does not
advertise masking capability despite implementing it. Even worse
the chip comes out of reset with all MSI entries masked, which due
to the missing masking capability never get unmasked.
- Move the check which prevents accessing the MSI[X] masking for XEN
back into the low level accessors. The recent consolidation missed
that these accessors can be invoked from places which do not have
that check which broke XEN. Move them back to he original place
instead of sprinkling tons of these checks all over the code"
* tag 'irq-urgent-2021-11-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
of/irq: Don't ignore interrupt-controller when interrupt-map failed
irqchip/sifive-plic: Fixup EOI failed when masked
irqchip/csky-mpintc: Fixup mask/unmask implementation
PCI/MSI: Destroy sysfs before freeing entries
PCI: Add MSI masking quirk for Nvidia ION AHCI
PCI/MSI: Deal with devices lying about their MSI mask capability
PCI/MSI: Move non-mask check back into low level accessors
Linus Torvalds [Sun, 14 Nov 2021 18:30:17 +0000 (10:30 -0800)]
Merge tag 'locking-urgent-2021-11-14' of git://git./linux/kernel/git/tip/tip
Pull x86 static call update from Thomas Gleixner:
"A single fix for static calls to make the trampoline patching more
robust by placing explicit signature bytes after the call trampoline
to prevent patching random other jumps like the CFI jump table
entries"
* tag 'locking-urgent-2021-11-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
static_call,x86: Robustify trampoline patching
Linus Torvalds [Sun, 14 Nov 2021 17:39:03 +0000 (09:39 -0800)]
Merge tag 'sched_urgent_for_v5.16_rc1' of git://git./linux/kernel/git/tip/tip
Pull scheduler fixes from Borislav Petkov:
- Avoid touching ~100 config files in order to be able to select the
preemption model
- clear cluster CPU masks too, on the CPU unplug path
- prevent use-after-free in cfs
- Prevent a race condition when updating CPU cache domains
- Factor out common shared part of smp_prepare_cpus() into a common
helper which can be called by both baremetal and Xen, in order to fix
a booting of Xen PV guests
* tag 'sched_urgent_for_v5.16_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
preempt: Restore preemption model selection configs
arch_topology: Fix missing clear cluster_cpumask in remove_cpu_topology()
sched/fair: Prevent dead task groups from regaining cfs_rq's
sched/core: Mitigate race cpus_share_cache()/update_top_cache_domain()
x86/smp: Factor out parts of native_smp_prepare_cpus()
Linus Torvalds [Sun, 14 Nov 2021 17:33:12 +0000 (09:33 -0800)]
Merge tag 'perf_urgent_for_v5.16_rc1' of git://git./linux/kernel/git/tip/tip
Pull perf fixes from Borislav Petkov:
- Prevent unintentional page sharing by checking whether a page
reference to a PMU samples page has been acquired properly before
that
- Make sure the LBR_SELECT MSR is saved/restored too
- Reset the LBR_SELECT MSR when resetting the LBR PMU to clear any
residual data left
* tag 'perf_urgent_for_v5.16_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/core: Avoid put_page() when GUP fails
perf/x86/vlbr: Add c->flags to vlbr event constraints
perf/x86/lbr: Reset LBR_SELECT during vlbr reset
Linus Torvalds [Sun, 14 Nov 2021 17:29:03 +0000 (09:29 -0800)]
Merge tag 'x86_urgent_for_v5.16_rc1' of git://git./linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Add the model number of a new, Raptor Lake CPU, to intel-family.h
- Do not log spurious corrected MCEs on SKL too, due to an erratum
- Clarify the path of paravirt ops patches upstream
- Add an optimization to avoid writing out AMX components to sigframes
when former are in init state
* tag 'x86_urgent_for_v5.16_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/cpu: Add Raptor Lake to Intel family
x86/mce: Add errata workaround for Skylake SKX37
MAINTAINERS: Add some information to PARAVIRT_OPS entry
x86/fpu: Optimize out sigframe xfeatures when in init state
Linus Torvalds [Sun, 14 Nov 2021 17:25:01 +0000 (09:25 -0800)]
Merge tag 'perf-tools-for-v5.16-2021-11-13' of git://git./linux/kernel/git/acme/linux
Pull more perf tools updates from Arnaldo Carvalho de Melo:
"Hardware tracing:
- ARM:
* Print the size of the buffer size consistently in hexadecimal in
ARM Coresight.
* Add Coresight snapshot mode support.
* Update --switch-events docs in 'perf record'.
* Support hardware-based PID tracing.
* Track task context switch for cpu-mode events.
- Vendor events:
* Add metric events JSON file for power10 platform
perf test:
- Get 'perf test' unit tests closer to kunit.
- Topology tests improvements.
- Remove bashisms from some tests.
perf bench:
- Fix memory leak of perf_cpu_map__new() in the futex benchmarks.
libbpf:
- Add some more weak libbpf functions o allow building with the
libbpf versions, old ones, present in distros.
libbeauty:
- Translate [gs]setsockopt 'level' argument integer values to
strings.
tools headers UAPI:
- Sync futex_waitv, arch prctl, sound, i195_drm and msr-index files
with the kernel sources.
Documentation:
- Add documentation to 'struct symbol'.
- Synchronize the definition of enum perf_hw_id with code in
tools/perf/design.txt"
* tag 'perf-tools-for-v5.16-2021-11-13' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (67 commits)
perf tests: Remove bash constructs from stat_all_pmu.sh
perf tests: Remove bash construct from record+zstd_comp_decomp.sh
perf test: Remove bash construct from stat_bpf_counters.sh test
perf bench futex: Fix memory leak of perf_cpu_map__new()
tools arch x86: Sync the msr-index.h copy with the kernel sources
tools headers UAPI: Sync drm/i915_drm.h with the kernel sources
tools headers UAPI: Sync sound/asound.h with the kernel sources
tools headers UAPI: Sync linux/prctl.h with the kernel sources
tools headers UAPI: Sync arch prctl headers with the kernel sources
perf tools: Add more weak libbpf functions
perf bpf: Avoid memory leak from perf_env__insert_btf()
perf symbols: Factor out annotation init/exit
perf symbols: Bit pack to save a byte
perf symbols: Add documentation to 'struct symbol'
tools headers UAPI: Sync files changed by new futex_waitv syscall
perf test bpf: Use ARRAY_CHECK() instead of ad-hoc equivalent, addressing array_size.cocci warning
perf arm-spe: Support hardware-based PID tracing
perf arm-spe: Save context ID in record
perf arm-spe: Update --switch-events docs in 'perf record'
perf arm-spe: Track task context switch for cpu-mode events
...
Thomas Gleixner [Sun, 14 Nov 2021 12:59:05 +0000 (13:59 +0100)]
Merge tag 'irqchip-fixes-5.16-1' of git://git./linux/kernel/git/maz/arm-platforms into irq/urgent
Pull irqchip fixes from Marc Zyngier:
- Address an issue with the SiFive PLIC being unable to EOI
a masked interrupt
- Move the disable/enable methods in the CSky mpintc to
mask/unmask
- Fix a regression in the OF irq code where an interrupt-controller
property in the same node as an interrupt-map property would get
ignored
Link: https://lore.kernel.org/all/20211112173459.4015233-1-maz@kernel.org
Linus Torvalds [Sat, 13 Nov 2021 23:32:30 +0000 (15:32 -0800)]
Merge tag 'zstd-for-linus-v5.16' of git://github.com/terrelln/linux
Pull zstd update from Nick Terrell:
"Update to zstd-1.4.10.
Add myself as the maintainer of zstd and update the zstd version in
the kernel, which is now 4 years out of date, to a much more recent
zstd release. This includes bug fixes, much more extensive fuzzing,
and performance improvements. And generates the kernel zstd
automatically from upstream zstd, so it is easier to keep the zstd
verison up to date, and we don't fall so far out of date again.
This includes 5 commits that update the zstd library version:
- Adds a new kernel-style wrapper around zstd.
This wrapper API is functionally equivalent to the subset of the
current zstd API that is currently used. The wrapper API changes to
be kernel style so that the symbols don't collide with zstd's
symbols. The update to zstd-1.4.10 maintains the same API and
preserves the semantics, so that none of the callers need to be
updated. All callers are updated in the commit, because there are
zero functional changes.
- Adds an indirection for `lib/decompress_unzstd.c` so it doesn't
depend on the layout of `lib/zstd/` to include every source file.
This allows the next patch to be automatically generated.
- Imports the zstd-1.4.10 source code. This commit is automatically
generated from upstream zstd (https://github.com/facebook/zstd).
- Adds me (terrelln@fb.com) as the maintainer of `lib/zstd`.
- Fixes a newly added build warning for clang.
The discussion around this patchset has been pretty long, so I've
included a FAQ-style summary of the history of the patchset, and why
we are taking this approach.
Why do we need to update?
-------------------------
The zstd version in the kernel is based off of zstd-1.3.1, which is
was released August 20, 2017. Since then zstd has seen many bug fixes
and performance improvements. And, importantly, upstream zstd is
continuously fuzzed by OSS-Fuzz, and bug fixes aren't backported to
older versions. So the only way to sanely get these fixes is to keep
up to date with upstream zstd.
There are no known security issues that affect the kernel, but we need
to be able to update in case there are. And while there are no known
security issues, there are relevant bug fixes. For example the problem
with large kernel decompression has been fixed upstream for over 2
years [1]
Additionally the performance improvements for kernel use cases are
significant. Measured for x86_64 on my Intel i9-9900k @ 3.6 GHz:
- BtrFS zstd compression at levels 1 and 3 is 5% faster
- BtrFS zstd decompression+read is 15% faster
- SquashFS zstd decompression+read is 15% faster
- F2FS zstd compression+write at level 3 is 8% faster
- F2FS zstd decompression+read is 20% faster
- ZRAM decompression+read is 30% faster
- Kernel zstd decompression is 35% faster
- Initramfs zstd decompression+build is 5% faster
On top of this, there are significant performance improvements coming
down the line in the next zstd release, and the new automated update
patch generation will allow us to pull them easily.
How is the update patch generated?
----------------------------------
The first two patches are preparation for updating the zstd version.
Then the 3rd patch in the series imports upstream zstd into the
kernel. This patch is automatically generated from upstream. A script
makes the necessary changes and imports it into the kernel. The
changes are:
- Replace all libc dependencies with kernel replacements and rewrite
includes.
- Remove unncessary portability macros like: #if defined(_MSC_VER).
- Use the kernel xxhash instead of bundling it.
This automation gets tested every commit by upstream's continuous
integration. When we cut a new zstd release, we will submit a patch to
the kernel to update the zstd version in the kernel.
The automated process makes it easy to keep the kernel version of zstd
up to date. The current zstd in the kernel shares the guts of the
code, but has a lot of API and minor changes to work in the kernel.
This is because at the time upstream zstd was not ready to be used in
the kernel envrionment as-is. But, since then upstream zstd has
evolved to support being used in the kernel as-is.
Why are we updating in one big patch?
-------------------------------------
The 3rd patch in the series is very large. This is because it is
restructuring the code, so it both deletes the existing zstd, and
re-adds the new structure. Future updates will be directly
proportional to the changes in upstream zstd since the last import.
They will admittidly be large, as zstd is an actively developed
project, and has hundreds of commits between every release. However,
there is no other great alternative.
One option ruled out is to replay every upstream zstd commit. This is
not feasible for several reasons:
- There are over 3500 upstream commits since the zstd version in the
kernel.
- The automation to automatically generate the kernel update was only
added recently, so older commits cannot easily be imported.
- Not every upstream zstd commit builds.
- Only zstd releases are "supported", and individual commits may have
bugs that were fixed before a release.
Another option to reduce the patch size would be to first reorganize
to the new file structure, and then apply the patch. However, the
current kernel zstd is formatted with clang-format to be more
"kernel-like". But, the new method imports zstd as-is, without
additional formatting, to allow for closer correlation with upstream,
and easier debugging. So the patch wouldn't be any smaller.
It also doesn't make sense to import upstream zstd commit by commit
going forward. Upstream zstd doesn't support production use cases
running of the development branch. We have a lot of post-commit
fuzzing that catches many bugs, so indiviudal commits may be buggy,
but fixed before a release. So going forward, I intend to import every
(important) zstd release into the Kernel.
So, while it isn't ideal, updating in one big patch is the only patch
I see forward.
Who is responsible for this code?
---------------------------------
I am. This patchset adds me as the maintainer for zstd. Previously,
there was no tree for zstd patches. Because of that, there were
several patches that either got ignored, or took a long time to merge,
since it wasn't clear which tree should pick them up. I'm officially
stepping up as maintainer, and setting up my tree as the path through
which zstd patches get merged. I'll make sure that patches to the
kernel zstd get ported upstream, so they aren't erased when the next
version update happens.
How is this code tested?
------------------------
I tested every caller of zstd on x86_64 (BtrFS, ZRAM, SquashFS, F2FS,
Kernel, InitRAMFS). I also tested Kernel & InitRAMFS on i386 and
aarch64. I checked both performance and correctness.
Also, thanks to many people in the community who have tested these
patches locally.
Lastly, this code will bake in linux-next before being merged into
v5.16.
Why update to zstd-1.4.10 when zstd-1.5.0 has been released?
------------------------------------------------------------
This patchset has been outstanding since 2020, and zstd-1.4.10 was the
latest release when it was created. Since the update patch is
automatically generated from upstream, I could generate it from
zstd-1.5.0.
However, there were some large stack usage regressions in zstd-1.5.0,
and are only fixed in the latest development branch. And the latest
development branch contains some new code that needs to bake in the
fuzzer before I would feel comfortable releasing to the kernel.
Once this patchset has been merged, and we've released zstd-1.5.1, we
can update the kernel to zstd-1.5.1, and exercise the update process.
You may notice that zstd-1.4.10 doesn't exist upstream. This release
is an artifical release based off of zstd-1.4.9, with some fixes for
the kernel backported from the development branch. I will tag the
zstd-1.4.10 release after this patchset is merged, so the Linux Kernel
is running a known version of zstd that can be debugged upstream.
Why was a wrapper API added?
----------------------------
The first versions of this patchset migrated the kernel to the
upstream zstd API. It first added a shim API that supported the new
upstream API with the old code, then updated callers to use the new
shim API, then transitioned to the new code and deleted the shim API.
However, Cristoph Hellwig suggested that we transition to a kernel
style API, and hide zstd's upstream API behind that. This is because
zstd's upstream API is supports many other use cases, and does not
follow the kernel style guide, while the kernel API is focused on the
kernel's use cases, and follows the kernel style guide.
Where is the previous discussion?
---------------------------------
Links for the discussions of the previous versions of the patch set
below. The largest changes in the design of the patchset are driven by
the discussions in v11, v5, and v1. Sorry for the mix of links, I
couldn't find most of the the threads on lkml.org"
Link: https://lkml.org/lkml/2020/9/29/27
Link: https://www.spinics.net/lists/linux-crypto/msg58189.html
Link: https://lore.kernel.org/linux-btrfs/20210430013157.747152-1-nickrterrell@gmail.com/
Link: https://lore.kernel.org/lkml/20210426234621.870684-2-nickrterrell@gmail.com/
Link: https://lore.kernel.org/linux-btrfs/20210330225112.496213-1-nickrterrell@gmail.com/
Link: https://lore.kernel.org/linux-f2fs-devel/20210326191859.1542272-1-nickrterrell@gmail.com/
Link: https://lkml.org/lkml/2020/12/3/1195
Link: https://lkml.org/lkml/2020/12/2/1245
Link: https://lore.kernel.org/linux-btrfs/20200916034307.2092020-1-nickrterrell@gmail.com/
Link: https://www.spinics.net/lists/linux-btrfs/msg105783.html
Link: https://lkml.org/lkml/2020/9/23/1074
Link: https://www.spinics.net/lists/linux-btrfs/msg105505.html
Link: https://lore.kernel.org/linux-btrfs/20200916034307.2092020-1-nickrterrell@gmail.com/
Signed-off-by: Nick Terrell <terrelln@fb.com>
Tested By: Paul Jones <paul@pauljones.id.au>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com> # LLVM/Clang v13.0.0 on x86-64
Tested-by: Jean-Denis Girard <jd.girard@sysnux.pf>
* tag 'zstd-for-linus-v5.16' of git://github.com/terrelln/linux:
lib: zstd: Add cast to silence clang's -Wbitwise-instead-of-logical
MAINTAINERS: Add maintainer entry for zstd
lib: zstd: Upgrade to latest upstream zstd version 1.4.10
lib: zstd: Add decompress_sources.h for decompress_unzstd
lib: zstd: Add kernel-specific API
Linus Torvalds [Sat, 13 Nov 2021 21:14:05 +0000 (13:14 -0800)]
Merge tag 'virtio-mem-for-5.16' of git://github.com/davidhildenbrand/linux
Pull virtio-mem update from David Hildenbrand:
"Support the VIRTIO_MEM_F_UNPLUGGED_INACCESSIBLE feature in virtio-mem,
now that "accidential" access to logically unplugged memory inside
added Linux memory blocks is no longer possible, because we:
- Removed /dev/kmem in commit
bbcd53c96071 ("drivers/char: remove
/dev/kmem for good")
- Disallowed access to virtio-mem device memory via /dev/mem in
commit
2128f4e21aa ("virtio-mem: disallow mapping virtio-mem memory
via /dev/mem")
- Sanitized access to virtio-mem device memory via /proc/kcore in
commit
0daa322b8ff9 ("fs/proc/kcore: don't read offline sections,
logically offline pages and hwpoisoned pages")
- Sanitized access to virtio-mem device memory via /proc/vmcore in
commit
ce2814622e84 ("virtio-mem: kdump mode to sanitize
/proc/vmcore access")
The new VIRTIO_MEM_F_UNPLUGGED_INACCESSIBLE feature that will be
required by some hypervisors implementing virtio-mem in the near
future, so let's support it now that we safely can"
* tag 'virtio-mem-for-5.16' of git://github.com/davidhildenbrand/linux:
virtio-mem: support VIRTIO_MEM_F_UNPLUGGED_INACCESSIBLE
James Clark [Thu, 28 Oct 2021 13:48:27 +0000 (14:48 +0100)]
perf tests: Remove bash constructs from stat_all_pmu.sh
The tests were passing but without testing and were printing the
following:
$ ./perf test -v 90
90: perf all PMU test :
--- start ---
test child forked, pid 51650
Testing cpu/branch-instructions/
./tests/shell/stat_all_pmu.sh: 10: [:
Performance counter stats for 'true':
137,307 cpu/branch-instructions/
0.
001686672 seconds time elapsed
0.
001376000 seconds user
0.
000000000 seconds sys: unexpected operator
Changing the regexes to a grep works in sh and prints this:
$ ./perf test -v 90
90: perf all PMU test :
--- start ---
test child forked, pid 60186
[...]
Testing tlb_flush.stlb_any
test child finished with 0
---- end ----
perf all PMU test: Ok
Signed-off-by: James Clark <james.clark@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Yonghong Song <yhs@fb.com>
Cc: bpf@vger.kernel.org
Cc: netdev@vger.kernel.org
Link: https://lore.kernel.org/r/20211028134828.65774-4-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
James Clark [Thu, 28 Oct 2021 13:48:26 +0000 (14:48 +0100)]
perf tests: Remove bash construct from record+zstd_comp_decomp.sh
Commit
463538a383a2 ("perf tests: Fix test 68 zstd compression for
s390") inadvertently removed the -g flag from all platforms rather than
just s390, because the [[ ]] construct fails in sh. Changing to single
brackets restores testing of call graphs and removes the following error
from the output:
$ ./perf test -v 85
85: Zstd perf.data compression/decompression :
--- start ---
test child forked, pid 50643
Collecting compressed record file:
./tests/shell/record+zstd_comp_decomp.sh: 15: [[: not found
Fixes:
463538a383a2 ("perf tests: Fix test 68 zstd compression for s390")
Signed-off-by: James Clark <james.clark@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Yonghong Song <yhs@fb.com>
Cc: bpf@vger.kernel.org
Cc: netdev@vger.kernel.org
Link: https://lore.kernel.org/r/20211028134828.65774-3-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
James Clark [Thu, 28 Oct 2021 13:48:25 +0000 (14:48 +0100)]
perf test: Remove bash construct from stat_bpf_counters.sh test
Currently the test skips with an error because == only works in bash:
$ ./perf test 91 -v
Couldn't bump rlimit(MEMLOCK), failures may take place when creating BPF maps, etc
91: perf stat --bpf-counters test :
--- start ---
test child forked, pid 44586
./tests/shell/stat_bpf_counters.sh: 26: [: -v: unexpected operator
test child finished with -2
---- end ----
perf stat --bpf-counters test: Skip
Changing == to = does the same thing, but doesn't result in an error:
./perf test 91 -v
Couldn't bump rlimit(MEMLOCK), failures may take place when creating BPF maps, etc
91: perf stat --bpf-counters test :
--- start ---
test child forked, pid 45833
Skipping: --bpf-counters not supported
Error: unknown option `bpf-counters'
[...]
test child finished with -2
---- end ----
perf stat --bpf-counters test: Skip
Signed-off-by: James Clark <james.clark@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Yonghong Song <yhs@fb.com>
Cc: bpf@vger.kernel.org
Cc: netdev@vger.kernel.org
Link: https://lore.kernel.org/r/20211028134828.65774-2-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Sohaib Mohamed [Fri, 12 Nov 2021 20:11:33 +0000 (22:11 +0200)]
perf bench futex: Fix memory leak of perf_cpu_map__new()
ASan reports memory leaks while running:
$ sudo ./perf bench futex all
The leaks are caused by perf_cpu_map__new not being freed.
This patch adds the missing perf_cpu_map__put since it calls
cpu_map_delete implicitly.
Fixes:
9c3516d1b850ea93 ("libperf: Add perf_cpu_map__new()/perf_cpu_map__read() functions")
Signed-off-by: Sohaib Mohamed <sohaib.amhmd@gmail.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: André Almeida <andrealmeid@collabora.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sohaib Mohamed <sohaib.amhmd@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lore.kernel.org/lkml/20211112201134.77892-1-sohaib.amhmd@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Fri, 7 Aug 2020 11:45:47 +0000 (08:45 -0300)]
tools arch x86: Sync the msr-index.h copy with the kernel sources
To pick up the changes in:
dae1bd58389615d4 ("x86/msr-index: Add MSRs for XFD")
Addressing these tools/perf build warnings:
diff -u tools/arch/x86/include/asm/msr-index.h arch/x86/include/asm/msr-index.h
Warning: Kernel ABI header at 'tools/arch/x86/include/asm/msr-index.h' differs from latest version at 'arch/x86/include/asm/msr-index.h'
That makes the beautification scripts to pick some new entries:
$ diff -u tools/arch/x86/include/asm/msr-index.h arch/x86/include/asm/msr-index.h
--- tools/arch/x86/include/asm/msr-index.h 2021-07-15 16:17:01.
819817827 -0300
+++ arch/x86/include/asm/msr-index.h 2021-11-06 15:49:33.
738517311 -0300
@@ -625,6 +625,8 @@
#define MSR_IA32_BNDCFGS_RSVD 0x00000ffc
+#define MSR_IA32_XFD 0x000001c4
+#define MSR_IA32_XFD_ERR 0x000001c5
#define MSR_IA32_XSS 0x00000da0
#define MSR_IA32_APICBASE 0x0000001b
$ tools/perf/trace/beauty/tracepoints/x86_msr.sh > /tmp/before
$ cp arch/x86/include/asm/msr-index.h tools/arch/x86/include/asm/msr-index.h
$ tools/perf/trace/beauty/tracepoints/x86_msr.sh > /tmp/after
$ diff -u /tmp/before /tmp/after
--- /tmp/before 2021-11-13 11:10:39.
964201505 -0300
+++ /tmp/after 2021-11-13 11:10:47.
902410873 -0300
@@ -93,6 +93,8 @@
[0x000001b0] = "IA32_ENERGY_PERF_BIAS",
[0x000001b1] = "IA32_PACKAGE_THERM_STATUS",
[0x000001b2] = "IA32_PACKAGE_THERM_INTERRUPT",
+ [0x000001c4] = "IA32_XFD",
+ [0x000001c5] = "IA32_XFD_ERR",
[0x000001c8] = "LBR_SELECT",
[0x000001c9] = "LBR_TOS",
[0x000001d9] = "IA32_DEBUGCTLMSR",
$
And this gets rebuilt:
CC /tmp/build/perf/trace/beauty/tracepoints/x86_msr.o
INSTALL trace_plugins
LD /tmp/build/perf/trace/beauty/tracepoints/perf-in.o
LD /tmp/build/perf/trace/beauty/perf-in.o
LD /tmp/build/perf/perf-in.o
LINK /tmp/build/perf/perf
Now one can trace systemwide asking to see backtraces to where those
MSRs are being read/written with:
# perf trace -e msr:*_msr/max-stack=32/ --filter="msr==IA32_XFD || msr==IA32_XFD_ERR"
^C#
#
If we use -v (verbose mode) we can see what it does behind the scenes:
# perf trace -v -e msr:*_msr/max-stack=32/ --filter="msr==IA32_XFD || msr==IA32_XFD_ERR"
<SNIP>
New filter for msr:read_msr: (msr==0x1c4 || msr==0x1c5) && (common_pid != 4448951 && common_pid != 8781)
New filter for msr:write_msr: (msr==0x1c4 || msr==0x1c5) && (common_pid != 4448951 && common_pid != 8781)
<SNIP>
^C#
Example with a frequent msr:
# perf trace -v -e msr:*_msr/max-stack=32/ --filter="msr==IA32_SPEC_CTRL" --max-events 2
Using CPUID AuthenticAMD-25-21-0
0x48
New filter for msr:read_msr: (msr==0x48) && (common_pid != 3738351 && common_pid != 3564)
0x48
New filter for msr:write_msr: (msr==0x48) && (common_pid != 3738351 && common_pid != 3564)
mmap size 528384B
Looking at the vmlinux_path (8 entries long)
symsrc__init: build id mismatch for vmlinux.
Using /proc/kcore for kernel data
Using /proc/kallsyms for symbols
0.000 pipewire/2479 msr:write_msr(msr: IA32_SPEC_CTRL, val: 6)
do_trace_write_msr ([kernel.kallsyms])
do_trace_write_msr ([kernel.kallsyms])
__switch_to_xtra ([kernel.kallsyms])
__switch_to ([kernel.kallsyms])
__schedule ([kernel.kallsyms])
schedule ([kernel.kallsyms])
schedule_hrtimeout_range_clock ([kernel.kallsyms])
do_epoll_wait ([kernel.kallsyms])
__x64_sys_epoll_wait ([kernel.kallsyms])
do_syscall_64 ([kernel.kallsyms])
entry_SYSCALL_64_after_hwframe ([kernel.kallsyms])
epoll_wait (/usr/lib64/libc-2.33.so)
[0x76c4] (/usr/lib64/spa-0.2/support/libspa-support.so)
[0x4cf0] (/usr/lib64/spa-0.2/support/libspa-support.so)
0.027 :0/0 msr:write_msr(msr: IA32_SPEC_CTRL, val: 2)
do_trace_write_msr ([kernel.kallsyms])
do_trace_write_msr ([kernel.kallsyms])
__switch_to_xtra ([kernel.kallsyms])
__switch_to ([kernel.kallsyms])
__schedule ([kernel.kallsyms])
schedule_idle ([kernel.kallsyms])
do_idle ([kernel.kallsyms])
cpu_startup_entry ([kernel.kallsyms])
start_kernel ([kernel.kallsyms])
secondary_startup_64_no_verify ([kernel.kallsyms])
#
Cc: Borislav Petkov <bp@suse.de>
Cc: Chang S. Bae <chang.seok.bae@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/YY%2FJdb6on7swsn+C@kernel.org/
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Sat, 13 Nov 2021 14:08:31 +0000 (11:08 -0300)]
tools headers UAPI: Sync drm/i915_drm.h with the kernel sources
To pick up the changes in:
e5e32171a2cf1e43 ("drm/i915/guc: Connect UAPI to GuC multi-lrc interface")
9409eb35942713d0 ("drm/i915: Expose logical engine instance to user")
ea673f17ab763879 ("drm/i915/uapi: Add comment clarifying purpose of I915_TILING_* values")
d3ac8d42168a9be7 ("drm/i915/pxp: interfaces for using protected objects")
cbbd3764b2399ad8 ("drm/i915/pxp: Create the arbitrary session after boot")
That don't add any new ioctl, so no changes in tooling.
This silences this perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/drm/i915_drm.h' differs from latest version at 'include/uapi/drm/i915_drm.h'
diff -u tools/include/uapi/drm/i915_drm.h include/uapi/drm/i915_drm.h
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Huang, Sean Z <sean.z.huang@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Sat, 13 Nov 2021 14:04:55 +0000 (11:04 -0300)]
tools headers UAPI: Sync sound/asound.h with the kernel sources
To pick up the changes in:
5aec579e08e4f2be ("ALSA: uapi: Fix a C++ style comment in asound.h")
That is just changing a // style comment to /* */.
This silences this perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/sound/asound.h' differs from latest version at 'include/uapi/sound/asound.h'
diff -u tools/include/uapi/sound/asound.h include/uapi/sound/asound.h
Cc: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Thu, 11 Feb 2021 15:50:52 +0000 (12:50 -0300)]
tools headers UAPI: Sync linux/prctl.h with the kernel sources
To pick the changes in:
61bc346ce64a3864 ("uapi/linux/prctl: provide macro definitions for the PR_SCHED_CORE type argument")
That don't result in any changes in tooling:
$ tools/perf/trace/beauty/prctl_option.sh > before
$ cp include/uapi/linux/prctl.h tools/include/uapi/linux/prctl.h
$ tools/perf/trace/beauty/prctl_option.sh > after
$ diff -u before after
$
Just silences this perf tools build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/prctl.h' differs from latest version at 'include/uapi/linux/prctl.h'
diff -u tools/include/uapi/linux/prctl.h include/uapi/linux/prctl.h
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Eugene Syromiatnikov <esyr@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Sat, 13 Nov 2021 13:43:52 +0000 (10:43 -0300)]
tools headers UAPI: Sync arch prctl headers with the kernel sources
To pick the changes in this cset:
db8268df0983adc2 ("x86/arch_prctl: Add controls for dynamic XSTATE components")
This picks these new prctls:
$ tools/perf/trace/beauty/x86_arch_prctl.sh > /tmp/before
$ cp arch/x86/include/uapi/asm/prctl.h tools/arch/x86/include/uapi/asm/prctl.h
$ tools/perf/trace/beauty/x86_arch_prctl.sh > /tmp/after
$ diff -u /tmp/before /tmp/after
--- /tmp/before 2021-11-13 10:42:52.
787308809 -0300
+++ /tmp/after 2021-11-13 10:43:02.
295558837 -0300
@@ -6,6 +6,9 @@
[0x1004 - 0x1001]= "GET_GS",
[0x1011 - 0x1001]= "GET_CPUID",
[0x1012 - 0x1001]= "SET_CPUID",
+ [0x1021 - 0x1001]= "GET_XCOMP_SUPP",
+ [0x1022 - 0x1001]= "GET_XCOMP_PERM",
+ [0x1023 - 0x1001]= "REQ_XCOMP_PERM",
};
#define x86_arch_prctl_codes_2_offset 0x2001
$
With this 'perf trace' can translate those numbers into strings and use
the strings in filter expressions:
# perf trace -e prctl
0.000 ( 0.011 ms): DOM Worker/3722622 prctl(option: SET_NAME, arg2: 0x7f9c014b7df5) = 0
0.032 ( 0.002 ms): DOM Worker/3722622 prctl(option: SET_NAME, arg2: 0x7f9bb6b51580) = 0
5.452 ( 0.003 ms): StreamT~ns #30/3722623 prctl(option: SET_NAME, arg2: 0x7f9bdbdfeb70) = 0
5.468 ( 0.002 ms): StreamT~ns #30/3722623 prctl(option: SET_NAME, arg2: 0x7f9bdbdfea70) = 0
24.494 ( 0.009 ms): IndexedDB #556/3722624 prctl(option: SET_NAME, arg2: 0x7f562a32ae28) = 0
24.540 ( 0.002 ms): IndexedDB #556/3722624 prctl(option: SET_NAME, arg2: 0x7f563c6d4b30) = 0
670.281 ( 0.008 ms): systemd-userwo/3722339 prctl(option: SET_NAME, arg2: 0x564be30805c8) = 0
670.293 ( 0.002 ms): systemd-userwo/3722339 prctl(option: SET_NAME, arg2: 0x564be30800f0) = 0
^C#
This addresses these perf build warnings:
Warning: Kernel ABI header at 'tools/arch/x86/include/uapi/asm/prctl.h' differs from latest version at 'arch/x86/include/uapi/asm/prctl.h'
diff -u tools/arch/x86/include/uapi/asm/prctl.h arch/x86/include/uapi/asm/prctl.h
Cc: Borislav Petkov <bp@suse.de>
Cc: Chang S. Bae <chang.seok.bae@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/YY%2FER104k852WOTK@kernel.org/T/#u
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Tue, 9 Nov 2021 14:07:06 +0000 (15:07 +0100)]
perf tools: Add more weak libbpf functions
We hit the window where perf uses libbpf functions, that did not make it
to the official libbpf release yet and it's breaking perf build with
dynamicly linked libbpf.
Fixing this by providing the new interface as weak functions which calls
the original libbpf functions. Fortunatelly the changes were just
renames.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20211109140707.1689940-2-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ian Rogers [Fri, 12 Nov 2021 07:45:25 +0000 (23:45 -0800)]
perf bpf: Avoid memory leak from perf_env__insert_btf()
perf_env__insert_btf() doesn't insert if a duplicate BTF id is
encountered and this causes a memory leak. Modify the function to return
a success/error value and then free the memory if insertion didn't
happen.
v2. Adds a return -1 when the insertion error occurs in
perf_env__fetch_btf. This doesn't affect anything as the result is
never checked.
Fixes:
3792cb2ff43b1b19 ("perf bpf: Save BTF in a rbtree in perf_env")
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tiezhu Yang <yangtiezhu@loongson.cn>
Cc: Yonghong Song <yhs@fb.com>
Cc: bpf@vger.kernel.org
Cc: netdev@vger.kernel.org
Link: http://lore.kernel.org/lkml/20211112074525.121633-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ian Rogers [Fri, 12 Nov 2021 03:51:24 +0000 (19:51 -0800)]
perf symbols: Factor out annotation init/exit
The exit function fixes a memory leak with the src field as detected by
leak sanitizer. An example of which is:
Indirect leak of
25133184 byte(s) in 207 object(s) allocated from:
#0 0x7f199ecfe987 in __interceptor_calloc libsanitizer/asan/asan_malloc_linux.cpp:154
#1 0x55defe638224 in annotated_source__alloc_histograms util/annotate.c:803
#2 0x55defe6397e4 in symbol__hists util/annotate.c:952
#3 0x55defe639908 in symbol__inc_addr_samples util/annotate.c:968
#4 0x55defe63aa29 in hist_entry__inc_addr_samples util/annotate.c:1119
#5 0x55defe499a79 in hist_iter__report_callback tools/perf/builtin-report.c:182
#6 0x55defe7a859d in hist_entry_iter__add util/hist.c:1236
#7 0x55defe49aa63 in process_sample_event tools/perf/builtin-report.c:315
#8 0x55defe731bc8 in evlist__deliver_sample util/session.c:1473
#9 0x55defe731e38 in machines__deliver_event util/session.c:1510
#10 0x55defe732a23 in perf_session__deliver_event util/session.c:1590
#11 0x55defe72951e in ordered_events__deliver_event util/session.c:183
#12 0x55defe740082 in do_flush util/ordered-events.c:244
#13 0x55defe7407cb in __ordered_events__flush util/ordered-events.c:323
#14 0x55defe740a61 in ordered_events__flush util/ordered-events.c:341
#15 0x55defe73837f in __perf_session__process_events util/session.c:2390
#16 0x55defe7385ff in perf_session__process_events util/session.c:2420
...
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin Liška <mliska@suse.cz>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20211112035124.94327-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ian Rogers [Fri, 12 Nov 2021 03:51:23 +0000 (19:51 -0800)]
perf symbols: Bit pack to save a byte
Use a bit field alongside the earlier bit fields.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin Liška <mliska@suse.cz>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20211112035124.94327-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ian Rogers [Fri, 12 Nov 2021 03:51:22 +0000 (19:51 -0800)]
perf symbols: Add documentation to 'struct symbol'
Refactor some existing comments and then infer the rest.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin Liška <mliska@suse.cz>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: https://lore.kernel.org/r/20211112035124.94327-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Wed, 8 Sep 2021 19:09:08 +0000 (16:09 -0300)]
tools headers UAPI: Sync files changed by new futex_waitv syscall
To pick the changes in these csets:
039c0ec9bb77446d ("futex,x86: Wire up sys_futex_waitv()")
bf69bad38cf63d98 ("futex: Implement sys_futex_waitv()")
That add support for this new syscall in tools such as 'perf trace'.
For instance, this is now possible:
# perf trace -e futex_waitv
^C#
# perf trace -v -e futex_waitv
Using CPUID AuthenticAMD-25-21-0
event qualifier tracepoint filter: (common_pid != 807333 && common_pid != 3564) && (id == 449)
mmap size 528384B
^C#
# perf trace -v -e futex* --max-events 10
Using CPUID AuthenticAMD-25-21-0
event qualifier tracepoint filter: (common_pid != 812168 && common_pid != 3564) && (id == 202 || id == 449)
mmap size 528384B
? ( ): Timer/219310 ... [continued]: futex()) = -1 ETIMEDOUT (Connection timed out)
0.012 ( 0.002 ms): Timer/219310 futex(uaddr: 0x7fd0b152d3c8, op: WAKE|PRIVATE_FLAG, val: 1) = 0
0.024 ( 0.060 ms): Timer/219310 futex(uaddr: 0x7fd0b152d420, op: WAIT_BITSET|PRIVATE_FLAG, utime: 0x7fd0b1657840, val3: MATCH_ANY) = 0
0.086 ( 0.001 ms): Timer/219310 futex(uaddr: 0x7fd0b152d3c8, op: WAKE|PRIVATE_FLAG, val: 1) = 0
0.088 ( ): Timer/219310 futex(uaddr: 0x7fd0b152d424, op: WAIT_BITSET|PRIVATE_FLAG, utime: 0x7fd0b1657840, val3: MATCH_ANY) ...
0.075 ( 0.005 ms): Web Content/219299 futex(uaddr: 0x7fd0b152d420, op: WAKE|PRIVATE_FLAG, val: 1) = 1
0.169 ( 0.004 ms): Web Content/219299 futex(uaddr: 0x7fd0b152d424, op: WAKE|PRIVATE_FLAG, val: 1) = 1
0.088 ( 0.089 ms): Timer/219310 ... [continued]: futex()) = 0
0.179 ( 0.001 ms): Timer/219310 futex(uaddr: 0x7fd0b152d3c8, op: WAKE|PRIVATE_FLAG, val: 1) = 0
0.181 ( ): Timer/219310 futex(uaddr: 0x7fd0b152d420, op: WAIT_BITSET|PRIVATE_FLAG, utime: 0x7fd0b1657840, val3: MATCH_ANY) ...
#
That is the filter expression attached to the raw_syscalls:sys_{enter,exit}
tracepoints.
$ grep futex_waitv tools/perf/arch/x86/entry/syscalls/syscall_64.tbl
449 common futex_waitv sys_futex_waitv
$
This addresses these perf build warnings:
Warning: Kernel ABI header at 'tools/include/uapi/asm-generic/unistd.h' differs from latest version at 'include/uapi/asm-generic/unistd.h'
diff -u tools/include/uapi/asm-generic/unistd.h include/uapi/asm-generic/unistd.h
Warning: Kernel ABI header at 'tools/perf/arch/x86/entry/syscalls/syscall_64.tbl' differs from latest version at 'arch/x86/entry/syscalls/syscall_64.tbl'
diff -u tools/perf/arch/x86/entry/syscalls/syscall_64.tbl arch/x86/entry/syscalls/syscall_64.tbl
Cc: André Almeida <andrealmeid@collabora.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Guo Zhengkui [Mon, 8 Nov 2021 07:07:52 +0000 (15:07 +0800)]
perf test bpf: Use ARRAY_CHECK() instead of ad-hoc equivalent, addressing array_size.cocci warning
Address following coccicheck warnings:
./tools/perf/tests/bpf.c:316:22-23: WARNING: Use ARRAY_SIZE.
Signed-off-by: Guo Zhengkui <guozhengkui@vivo.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Yonghong Song <yhs@fb.com>
Cc: bpf@vger.kernel.org
Cc: kernel@vivo.com
Cc: netdev@vger.kernel.org
Link: http://lore.kernel.org/lkml/20211108070801.5540-1-guozhengkui@vivo.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
German Gomez [Thu, 11 Nov 2021 13:36:25 +0000 (13:36 +0000)]
perf arm-spe: Support hardware-based PID tracing
If ARM SPE traces contains CONTEXT packets with TID info, use these
values for tracking the TID of samples. Otherwise fall back to using
context switch events and display a message warning to the user of
possible timing inaccuracies [1].
[1] https://lore.kernel.org/lkml/
f877cfa6-9b25-6445-3806-
ca44a4042eaf@arm.com/
Signed-off-by: German Gomez <german.gomez@arm.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20211111133625.193568-5-german.gomez@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
German Gomez [Thu, 11 Nov 2021 13:36:24 +0000 (13:36 +0000)]
perf arm-spe: Save context ID in record
This patch is to save context ID in record, this will be used to set TID
for samples.
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: German Gomez <german.gomez@arm.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20211111133625.193568-4-german.gomez@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
German Gomez [Thu, 11 Nov 2021 13:36:23 +0000 (13:36 +0000)]
perf arm-spe: Update --switch-events docs in 'perf record'
Update 'perf record' docs and ARM SPE recording options so that they are
consistent. This includes supporting the --no-switch-events flag in ARM
SPE as well.
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: German Gomez <german.gomez@arm.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20211111133625.193568-3-german.gomez@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim [Thu, 11 Nov 2021 13:36:22 +0000 (13:36 +0000)]
perf arm-spe: Track task context switch for cpu-mode events
When perf report synthesize events from ARM SPE data, it refers to
current cpu, pid and tid in the machine. But there's no place to set
them in the ARM SPE decoder. I'm seeing all pid/tid is set to -1 and
user symbols are not resolved in the output.
# perf record -a -e arm_spe_0/ts_enable=1/ sleep 1
# perf report -q | head
8.77% 8.77% :-1 [kernel.kallsyms] [k] format_decode
7.02% 7.02% :-1 [kernel.kallsyms] [k] seq_printf
7.02% 7.02% :-1 [unknown] [.] 0x0000ffff9f687c34
5.26% 5.26% :-1 [kernel.kallsyms] [k] vsnprintf
3.51% 3.51% :-1 [kernel.kallsyms] [k] string
3.51% 3.51% :-1 [unknown] [.] 0x0000ffff9f66ae20
3.51% 3.51% :-1 [unknown] [.] 0x0000ffff9f670b3c
3.51% 3.51% :-1 [unknown] [.] 0x0000ffff9f67c040
1.75% 1.75% :-1 [kernel.kallsyms] [k] ___cache_free
1.75% 1.75% :-1 [kernel.kallsyms] [k] __count_memcg_events
Like Intel PT, add context switch records to track task info. As ARM
SPE support was added later than PERF_RECORD_SWITCH_CPU_WIDE, I think
we can safely set the attr.context_switch bit and use it.
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: German Gomez <german.gomez@arm.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20211111133625.193568-2-german.gomez@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Kajol Jain [Mon, 8 Nov 2021 06:00:10 +0000 (11:30 +0530)]
perf vendor events power10: Add metric events JSON file for power10 platform
Add PMU metric JSON file for power10 platform.
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Reviewed-by: Paul Clarke <pc@us.ibm.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Nageswara R Sastry <rnsastry@linux.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lore.kernel.org/lkml/20211108060010.177517-1-kjain@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Like Xu [Tue, 9 Nov 2021 09:01:47 +0000 (17:01 +0800)]
perf design.txt: Synchronize the definition of enum perf_hw_id with code
We're not surprised that there are tons of Linux users who only read the
documentation to learn about the kernel.
Let's update the perf part for common hardware events since three new
*generic* hardware events were added.
Signed-off-by: Like Xu <likexu@tencent.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20211109090147.56978-1-likexu@tencent.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Andrew Kilroy [Tue, 9 Nov 2021 14:21:53 +0000 (14:21 +0000)]
perf arm-spe: Print size using consistent format
Since the size is already printed earlier in hex, print the same data
using the same format, in hex.
Reviewed-by: James Clark <james.clark@arm.com>
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Andrew Kilroy <andrew.kilroy@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20211109142153.56546-3-german.gomez@arm.com
Signed-off-by: German Gomez <german.gomez@arm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Andrew Kilroy [Tue, 9 Nov 2021 14:21:52 +0000 (14:21 +0000)]
perf cs-etm: Print size using consistent format
Since the size is already printed earlier in hex, print the same data
using the same format, in hex.
Reviewed-by: James Clark <james.clark@arm.com>
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Andrew Kilroy <andrew.kilroy@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20211109142153.56546-2-german.gomez@arm.com
Signed-off-by: German Gomez <german.gomez@arm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
German Gomez [Tue, 9 Nov 2021 16:30:09 +0000 (16:30 +0000)]
perf arm-spe: Snapshot mode test
Shell script test_arm_spe.sh has been added to test the recording of SPE
tracing events in snapshot mode.
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: German Gomez <german.gomez@arm.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20211109163009.92072-4-german.gomez@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
German Gomez [Tue, 9 Nov 2021 16:30:08 +0000 (16:30 +0000)]
perf arm-spe: Implement find_snapshot callback
The head pointer of the AUX buffer managed by the arm_spe_pmu.c driver
is not monotonically increasing, therefore the find_snapshot callback is
needed in order to find the trace data within the AUX buffer and avoid
wasting space in the perf.data file.
The pointer is assumed to have wrapped if the buffer contains non-zero
data at the end. If it has wrapped, the entire contents of the AUX
buffer are stored in the perf.data file. Otherwise only the data up to
the head pointer is stored.
Reviewed-by: James Clark <james.clark@arm.com>
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: German Gomez <german.gomez@arm.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20211109163009.92072-3-german.gomez@arm.com
Tested-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
German Gomez [Tue, 9 Nov 2021 16:30:07 +0000 (16:30 +0000)]
perf arm-spe: Add snapshot mode support
This patch enables support for snapshot mode of arm_spe events,
including the implementation of the necessary callbacks (excluding
find_snapshot, which is to be included in a followup commit).
Reviewed-by: James Clark <james.clark@arm.com>
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: German Gomez <german.gomez@arm.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20211109163009.92072-2-german.gomez@arm.com
Tested-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ian Rogers [Thu, 11 Nov 2021 00:21:09 +0000 (16:21 -0800)]
perf expr: Add source_count for aggregating events
Events like uncore_imc/cas_count_read/ on Skylake open multiple events
and then aggregate in the metric leader. To determine the average value
per event the number of these events is needed. Add a source_count
function that returns this value by counting the number of events with
the given metric leader. For most events the value is 1 but for
uncore_imc/cas_count_read/ it can yield values like 6.
Add a generic test, but manually tested with a test metric that uses
the function.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul A . Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: Song Liu <song@kernel.org>
Cc: Wan Jiabing <wanjiabing@vivo.com>
Cc: Yury Norov <yury.norov@gmail.com>
Link: https://lore.kernel.org/r/20211111002109.194172-9-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ian Rogers [Thu, 11 Nov 2021 00:21:08 +0000 (16:21 -0800)]
perf expr: Move ID handling to its own function
This will facilitate sharing in a follow-on change.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul A . Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: Song Liu <song@kernel.org>
Cc: Wan Jiabing <wanjiabing@vivo.com>
Cc: Yury Norov <yury.norov@gmail.com>
Link: https://lore.kernel.org/r/20211111002109.194172-8-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>