sound: fixup sound card

Signed-off-by: Nick Xie <nick@khadas.com>

sound: spdif: disable mono sound channel

Signed-off-by: Nick Xie <nick@khadas.com>

arm64: dts: VIM3: remove memory node to support 4GB DDR

Signed-off-by: Nick Xie <nick@khadas.com>

MCU: FAN: fixup speed level

Signed-off-by: Nick Xie <nick@khadas.com>

MCU: VIM3: fixup temperature read issue

Signed-off-by: Nick Xie <nick@khadas.com>

MCU: add poweroff node

Signed-off-by: Nick Xie <nick@khadas.com>

MCU: VIM3: add USB PCIe switch node

Signed-off-by: Nick Xie <nick@khadas.com>

VIM3: tca6408: setup all gpios to output low when initialize

Signed-off-by: Nick Xie <nick@khadas.com>

emmc: After standby sleep, clear the CMD tuning flag [1/1]

PD#SWPL-9075

Problem:
Because the CMD tune flag was not cleared before standby,
debug printing was performed during auto tune

Solution:
After standby sleep, clear the CMD tuning flag

Verify:
passed on TL1

Change-Id: Ie4a531346f50983009477131408d81c76d5c020f
Signed-off-by: Long Yu <long.yu@amlogic.com>

emmc: report response crc error on G12B when hs400 200M busmode [1/1]

PD#SWPL-8670

Problem:
G12B report response crc error when hs400 200M busmode

Solution:
find a eyetest hole between 14-20 or 48-54, otherwise
tuning tx_delay and find again and
adjust CMD rx timing dynamically in HS400 mode

Verify:
passed on G12B

Change-Id: I23e4d5118e0ca0564367a77102aea9e1085633a9
Signed-off-by: Long Yu <long.yu@amlogic.com>

emmc: report response crc error on tl1 when hs400 200M busmode [1/1]

PD#SWPL-7740

Problem:
tl1 report response crc error on tl1 when hs400 200M busmode

Solution:
find a eyetest hole between 14-20 or 48-54, otherwise
tuning tx_delay and find again

Verify:
passed on tl1_skt

Change-Id: I46e2c3c4d7ef24bcac7b44fee73112894540fc33
Signed-off-by: Ruixuan Li <ruixuan.li@amlogic.com>

emmc: run hs400 200M on sm1 [1/1]

PD#SWPL-5404

Problem:
run hs400 200M on sm1

Solution:
config sm1 and modify dts

Verify:
passed on ac200

Change-Id: I34e54f88db79ce42f9effbf8d673ade613de328f
Signed-off-by: Ruixuan Li <ruixuan.li@amlogic.com>

arm64: dts: emmc: VIM3: Add HS400 busmode support

Signed-off-by: Nick Xie <nick@khadas.com>

storage: emmc: Add HS400 busmode support for G12B-RevB [1/1]

PD#SWPL-5040

Problem:
not support HS400 busmode

Solution:
add HS400 busmode support for G12B-RevB

Verify:
T962X-R311,TL1-T962X2_X301,G12B-W400

Change-Id: I11a1f47b9473fa341c7d754a51d6e270551758a7
Signed-off-by: long yu <long.yu@amlogic.com>

storage: emmc: Add HS400 busmode support for TL1 [1/1]

PD#SWPL-2311

Problem:
not support HS400 busmode

Solution:
add HS400 busmode support for TL1

Verify:
TL1-T962X2_X301

Change-Id: I95ac19e9c0c5b84c9225602cda6964aaaee4151e
Signed-off-by: Long Yu <long.yu@amlogic.com>
Signed-off-by: Luan Yuan <luan.yuan@amlogic.com>

arm64: dts: VIM3: fixup USB 3.0

Signed-off-by: Nick Xie <nick@khadas.com>

VIM3: add MCU control support

Signed-off-by: Nick Xie <nick@khadas.com>

arm64: dts: VIM1/VIM2: add missing reset-cells property

Signed-off-by: Nick Xie <nick@khadas.com>

arm64: dts: VIMs: add dummy node 'chosen {}' for KEXEC

Signed-off-by: Nick Xie <nick@khadas.com>

arm64: config: enable CONFIG_KEXEC

Signed-off-by: Nick Xie <nick@khadas.com>

arm64: dts: VIM3: move to Amlogic A311D

dts sync from 'g12b_a311d_w400_buildroot.dts'

backup S922X dts as 'kvim3_s922x_linux.dts'

Signed-off-by: Nick Xie <nick@khadas.com>

arm64: dts: VIM3: disable fusb302

Signed-off-by: Nick Xie <nick@khadas.com>

VIMs: add gpiomem support

Signed-off-by: Nick Xie <nick@khadas.com>

add device model to /proc/cpuinfo

Signed-off-by: Nick Xie <nick@khadas.com>

config: enable framebuffer console rotation

Signed-off-by: Nick <nick@khadas.com>

Merge tag 'v4.9.179' into khadas-vims-4.9.y

This is the 4.9.179 stable release

arm64: config: enable RAID

Signed-off-by: Nick <nick@khadas.com>

arm64: config: rename kvim3_defconfig to kvim_defconfig

Signed-off-by: Nick <nick@khadas.com>

arm64: dts: VIM1/VIM2: add remote support

add MCU control driver

Signed-off-by: Nick <nick@khadas.com>

MAC: get ethernet mac address from command line or DTB

Signed-off-by: Nick <nick@khadas.com>

phy/realtek: WOL: get the wol state from command line

Signed-off-by: Nick <nick@khadas.com>

phy/realtek: fixup WOL on shutdown

Signed-off-by: Nick <nick@khadas.com>

arm64: dts: VIM2: add gpio keypad node

Signed-off-by: Nick <nick@khadas.com>

arm64: dts: VIM2: add BT node

Signed-off-by: Nick <nick@khadas.com>

VIM2: add fan driver for V1.2

Signed-off-by: Nick <nick@khadas.com>

memory: VIM2: auto to allocate the memory with 'ddr_size'

Signed-off-by: Nick <nick@khadas.com>

osd/fb: VIM2: disable afbc

Signed-off-by: Nick <nick@khadas.com>

arm64: dts: VIM2: disable uart_B

Signed-off-by: Nick <nick@khadas.com>

aem64: defconfig: disable CONFIG_AMLOGIC_RAMDUMP

Signed-off-by: Nick <nick@khadas.com>

add Khadas VIM2 support

dts sync from 'gxm_q200_2g_buildroot.dts'

Signed-off-by: Nick <nick@khadas.com>

VIM3/VIM3L: config: build GPU driver as module

Signed-off-by: Nick <nick@khadas.com>

add Khadas VIM support

dts sync from 'gxl_p212_2g_buildroot'

Signed-off-by: Nick <nick@khadas.com>

GPU: add utgard r7p0 driver for mali 450

sync from buildroot_openlinux_kernel_4.9_fbdev_20180706

Linux 4.9.179

fbdev: sm712fb: fix memory frequency by avoiding a switch/case fallthrough

commit 9dc20113988b9a75ea6b3abd68dc45e2d73ccdab upstream.

A fallthrough in switch/case was introduced in f627caf55b8e ("fbdev:
sm712fb: fix crashes and garbled display during DPMS modesetting"),
due to my copy-paste error, which would cause the memory clock frequency
for SM720 to be programmed to SM712.

Since it only reprograms the clock to a different frequency, it's only
a benign issue without visible side-effect, so it also evaded Sudip
Mukherjee's code review and regression tests. scripts/checkpatch.pl
also failed to discover the issue, possibly due to nested switch
statements.

This issue was found by Stephen Rothwell by building linux-next with
-Wimplicit-fallthrough.

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Fixes: f627caf55b8e ("fbdev: sm712fb: fix crashes and garbled display during DPMS modesetting")
Signed-off-by: Yifeng Li <tomli@tomli.me>
Cc: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Cc: "Gustavo A. R. Silva" <gustavo@embeddedor.com>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: Honour FITRIM range constraints during free space trim

commit c2d1b3aae33605a61cbab445d8ae1c708ccd2698 upstream.

Up until now trimming the freespace was done irrespective of what the
arguments of the FITRIM ioctl were. For example fstrim's -o/-l arguments
will be entirely ignored. Fix it by correctly handling those paramter.
This requires breaking if the found freespace extent is after the end of
the passed range as well as completing trim after trimming
fstrim_range::len bytes.

Fixes: 499f377f49f0 ("btrfs: iterate over unused chunk space in FITRIM")
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

md/raid: raid5 preserve the writeback action after the parity check

commit b2176a1dfb518d870ee073445d27055fea64dfb8 upstream.

The problem is that any 'uptodate' vs 'disks' check is not precise
in this path. Put a "WARN_ON(!test_bit(R5_UPTODATE, &dev->flags)" on the
device that might try to kick off writes and then skip the action.
Better to prevent the raid driver from taking unexpected action *and* keep
the system alive vs killing the machine with BUG_ON.

Note: fixed warning reported by kbuild test robot <lkp@intel.com>

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Nigel Croxon <ncroxon@redhat.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "Don't jump to compute_result state from check_result state"

commit a25d8c327bb41742dbd59f8c545f59f3b9c39983 upstream.

This reverts commit 4f4fd7c5798bbdd5a03a60f6269cf1177fbd11ef.

Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Nigel Croxon <ncroxon@redhat.com>
Cc: Xiao Ni <xni@redhat.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf bench numa: Add define for RUSAGE_THREAD if not present

[ Upstream commit bf561d3c13423fc54daa19b5d49dc15fafdb7acc ]

While cross building perf to the ARC architecture on a fedora 30 host,
we were failing with:

      CC       /tmp/build/perf/bench/numa.o
  bench/numa.c: In function ‘worker_thread’:
  bench/numa.c:1261:12: error: ‘RUSAGE_THREAD’ undeclared (first use in this function); did you mean ‘SIGEV_THREAD’?
    getrusage(RUSAGE_THREAD, &rusage);
              ^~~~~~~~~~~~~
              SIGEV_THREAD
  bench/numa.c:1261:12: note: each undeclared identifier is reported only once for each function it appears in

[perfbuilder@60d5802468f6 perf]$ /arc_gnu_2019.03-rc1_prebuilt_uclibc_le_archs_linux_install/bin/arc-linux-gcc --version | head -1
arc-linux-gcc (ARCv2 ISA Linux uClibc toolchain 2019.03-rc1) 8.3.1 20190225
[perfbuilder@60d5802468f6 perf]$

Trying to reproduce a report by Vineet, I noticed that, with just
cross-built zlib and numactl libraries, I ended up with the above
failure.

So, since RUSAGE_THREAD is available as a define, check for that and
numactl libraries, I ended up with the above failure.

So, since RUSAGE_THREAD is available as a define in the system headers,
check if it is defined in the 'perf bench numa' sources and define it if
not.

Now it builds and I have to figure out if the problem reported by Vineet
only takes place if we have libelf or some other library available.

Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: linux-snps-arc@lists.infradead.org
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Vineet Gupta <Vineet.Gupta1@synopsys.com>
Link: https://lkml.kernel.org/n/tip-2wb4r1gir9xrevbpq7qp0amk@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ufs: fix braino in ufs_get_inode_gid() for solaris UFS flavour

[ Upstream commit 4e9036042fedaffcd868d7f7aa948756c48c637d ]

To choose whether to pick the GID from the old (16bit) or new (32bit)
field, we should check if the old gid field is set to 0xffff.  Mainline
checks the old *UID* field instead - cut'n'paste from the corresponding
code in ufs_get_inode_uid().

Fixes: 252e211e90ce
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

power: supply: sysfs: prevent endless uevent loop with CONFIG_POWER_SUPPLY_DEBUG

[ Upstream commit 349ced9984ff540ce74ca8a0b2e9b03dc434b9dd ]

Fix a similar endless event loop as was done in commit
8dcf32175b4e ("i2c: prevent endless uevent loop with
CONFIG_I2C_DEBUG_CORE"):

  The culprit is the dev_dbg printk in the i2c uevent handler. If
  this is activated (for instance by CONFIG_I2C_DEBUG_CORE) it results
  in an endless loop with systemd-journald.

  This happens if user-space scans the system log and reads the uevent
  file to get information about a newly created device, which seems
  fair use to me. Unfortunately reading the "uevent" file uses the
  same function that runs for creating the uevent for a new device,
  generating the next syslog entry

Both CONFIG_I2C_DEBUG_CORE and CONFIG_POWER_SUPPLY_DEBUG were reported
in https://bugs.freedesktop.org/show_bug.cgi?id=76886 but only former
seems to have been fixed. Drop debug prints as it was done in I2C
subsystem to resolve the issue.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: Chris Healy <cphealy@gmail.com>
Cc: linux-pm@vger.kernel.org
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

KVM: arm/arm64: Ensure vcpu target is unset on reset failure

[ Upstream commit 811328fc3222f7b55846de0cd0404339e2e1e6d7 ]

A failed KVM_ARM_VCPU_INIT should not set the vcpu target,
as the vcpu target is used by kvm_vcpu_initialized() to
determine if other vcpu ioctls may proceed. We need to set
the target before calling kvm_reset_vcpu(), but if that call
fails, we should then unset it and clear the feature bitmap
while we're at it.

Signed-off-by: Andrew Jones <drjones@redhat.com>
[maz: Simplified patch, completed commit message]
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mac80211: Fix kernel panic due to use of txq after free

[ Upstream commit f1267cf3c01b12e0f843fb6a7450a7f0b2efab8a ]

The txq of vif is added to active_txqs list for ATF TXQ scheduling
in the function ieee80211_queue_skb(), but it was not properly removed
before freeing the txq object. It was causing use after free of the txq
objects from the active_txqs list, result was kernel panic
due to invalid memory access.

Fix kernel invalid memory access by properly removing txq object
from active_txqs list before free the object.

Signed-off-by: Bhagavathi Perumal S <bperumal@codeaurora.org>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

xfrm4: Fix uninitialized memory read in _decode_session4

[ Upstream commit 8742dc86d0c7a9628117a989c11f04a9b6b898f3 ]

We currently don't reload pointers pointing into skb header
after doing pskb_may_pull() in _decode_session4(). So in case
pskb_may_pull() changed the pointers, we read from random
memory. Fix this by putting all the needed infos on the
stack, so that we don't need to access the header pointers
after doing pskb_may_pull().

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

vti4: ipip tunnel deregistration fixes.

[ Upstream commit 5483844c3fc18474de29f5d6733003526e0a9f78 ]

If tunnel registration failed during module initialization, the module
would fail to deregister the IPPROTO_COMP protocol and would attempt to
deregister the tunnel.

The tunnel was not deregistered during module-exit.

Fixes: dd9ee3444014e ("vti4: Fix a ipip packet processing bug in 'IPCOMP' virtual tunnel")
Signed-off-by: Jeremy Sowden <jeremy@azazel.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

xfrm6_tunnel: Fix potential panic when unloading xfrm6_tunnel module

[ Upstream commit 6ee02a54ef990a71bf542b6f0a4e3321de9d9c66 ]

When unloading xfrm6_tunnel module, xfrm6_tunnel_fini directly
frees the xfrm6_tunnel_spi_kmem. Maybe someone has gotten the
xfrm6_tunnel_spi, so need to wait it.

Fixes: 91cc3bb0b04ff("xfrm6_tunnel: RCU conversion")
Signed-off-by: Su Yanjun <suyj.fnst@cn.fujitsu.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

xfrm: policy: Fix out-of-bound array accesses in __xfrm_policy_unlink

[ Upstream commit b805d78d300bcf2c83d6df7da0c818b0fee41427 ]

UBSAN report this:

UBSAN: Undefined behaviour in net/xfrm/xfrm_policy.c:1289:24
index 6 is out of range for type 'unsigned int [6]'
CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.4.162-514.55.6.9.x86_64+ #13
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
 0000000000000000 1466cf39b41b23c9 ffff8801f6b07a58 ffffffff81cb35f4
 0000000041b58ab3 ffffffff83230f9c ffffffff81cb34e0 ffff8801f6b07a80
 ffff8801f6b07a20 1466cf39b41b23c9 ffffffff851706e0 ffff8801f6b07ae8
Call Trace:
 <IRQ>  [<ffffffff81cb35f4>] __dump_stack lib/dump_stack.c:15 [inline]
 <IRQ>  [<ffffffff81cb35f4>] dump_stack+0x114/0x1a0 lib/dump_stack.c:51
 [<ffffffff81d94225>] ubsan_epilogue+0x12/0x8f lib/ubsan.c:164
 [<ffffffff81d954db>] __ubsan_handle_out_of_bounds+0x16e/0x1b2 lib/ubsan.c:382
 [<ffffffff82a25acd>] __xfrm_policy_unlink+0x3dd/0x5b0 net/xfrm/xfrm_policy.c:1289
 [<ffffffff82a2e572>] xfrm_policy_delete+0x52/0xb0 net/xfrm/xfrm_policy.c:1309
 [<ffffffff82a3319b>] xfrm_policy_timer+0x30b/0x590 net/xfrm/xfrm_policy.c:243
 [<ffffffff813d3927>] call_timer_fn+0x237/0x990 kernel/time/timer.c:1144
 [<ffffffff813d8e7e>] __run_timers kernel/time/timer.c:1218 [inline]
 [<ffffffff813d8e7e>] run_timer_softirq+0x6ce/0xb80 kernel/time/timer.c:1401
 [<ffffffff8120d6f9>] __do_softirq+0x299/0xe10 kernel/softirq.c:273
 [<ffffffff8120e676>] invoke_softirq kernel/softirq.c:350 [inline]
 [<ffffffff8120e676>] irq_exit+0x216/0x2c0 kernel/softirq.c:391
 [<ffffffff82c5edab>] exiting_irq arch/x86/include/asm/apic.h:652 [inline]
 [<ffffffff82c5edab>] smp_apic_timer_interrupt+0x8b/0xc0 arch/x86/kernel/apic/apic.c:926
 [<ffffffff82c5c985>] apic_timer_interrupt+0xa5/0xb0 arch/x86/entry/entry_64.S:735
 <EOI>  [<ffffffff81188096>] ? native_safe_halt+0x6/0x10 arch/x86/include/asm/irqflags.h:52
 [<ffffffff810834d7>] arch_safe_halt arch/x86/include/asm/paravirt.h:111 [inline]
 [<ffffffff810834d7>] default_idle+0x27/0x430 arch/x86/kernel/process.c:446
 [<ffffffff81085f05>] arch_cpu_idle+0x15/0x20 arch/x86/kernel/process.c:437
 [<ffffffff8132abc3>] default_idle_call+0x53/0x90 kernel/sched/idle.c:92
 [<ffffffff8132b32d>] cpuidle_idle_call kernel/sched/idle.c:156 [inline]
 [<ffffffff8132b32d>] cpu_idle_loop kernel/sched/idle.c:251 [inline]
 [<ffffffff8132b32d>] cpu_startup_entry+0x60d/0x9a0 kernel/sched/idle.c:299
 [<ffffffff8113e119>] start_secondary+0x3c9/0x560 arch/x86/kernel/smpboot.c:245

The issue is triggered as this:

xfrm_add_policy
    -->verify_newpolicy_info  //check the index provided by user with XFRM_POLICY_MAX
      //In my case, the index is 0x6E6BB6, so it pass the check.
    -->xfrm_policy_construct  //copy the user's policy and set xfrm_policy_timer
    -->xfrm_policy_insert
--> __xfrm_policy_link //use the orgin dir, in my case is 2
--> xfrm_gen_index   //generate policy index, there is 0x6E6BB6

then xfrm_policy_timer be fired

xfrm_policy_timer
   --> xfrm_policy_id2dir  //get dir from (policy index & 7), in my case is 6
   --> xfrm_policy_delete
      --> __xfrm_policy_unlink //access policy_count[dir], trigger out of range access

Add xfrm_policy_id2dir check in verify_newpolicy_info, make sure the computed dir is
valid, to fix the issue.

Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: e682adf021be ("xfrm: Try to honor policy index if it's supplied by user")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dm delay: fix a crash when invalid device is specified

commit 81bc6d150ace6250503b825d9d0c10f7bbd24095 upstream.

When the target line contains an invalid device, delay_ctr() will call
delay_dtr() with NULL workqueue.  Attempting to destroy the NULL
workqueue causes a crash.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI: Work around Pericom PCIe-to-PCI bridge Retrain Link erratum

commit 4ec73791a64bab25cabf16a6067ee478692e506d upstream.

Due to an erratum in some Pericom PCIe-to-PCI bridges in reverse mode
(conventional PCI on primary side, PCIe on downstream side), the Retrain
Link bit needs to be cleared manually to allow the link training to
complete successfully.

If it is not cleared manually, the link training is continuously restarted
and no devices below the PCI-to-PCIe bridge can be accessed.  That means
drivers for devices below the bridge will be loaded but won't work and may
even crash because the driver is only reading 0xffff.

See the Pericom Errata Sheet PI7C9X111SLB_errata_rev1.2_102711.pdf for
details.  Devices known as affected so far are: PI7C9X110, PI7C9X111SL,
PI7C9X130.

Add a new flag, clear_retrain_link, in struct pci_dev.  Quirks for affected
devices set this bit.

Note that pcie_retrain_link() lives in aspm.c because that's currently the
only place we use it, but this erratum is not specific to ASPM, and we may
retrain links for other reasons in the future.

Signed-off-by: Stefan Mätje <stefan.maetje@esd.eu>
[bhelgaas: apply regardless of CONFIG_PCIEASPM]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
CC: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI: Factor out pcie_retrain_link() function

commit 86fa6a344209d9414ea962b1f1ac6ade9dd7563a upstream.

Factor out pcie_retrain_link() to use for Pericom Retrain Link quirk.  No
functional change intended.

Signed-off-by: Stefan Mätje <stefan.maetje@esd.eu>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
CC: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI: Mark Atheros AR9462 to avoid bus reset

commit 6afb7e26978da5e86e57e540fdce65c8b04f398a upstream.

When using PCI passthrough with this device, the host machine locks up
completely when starting the VM, requiring a hard reboot.  Add a quirk to
avoid bus resets on this device.

Fixes: c3e59ee4e766 ("PCI: Mark Atheros AR93xx to avoid bus reset")
Link: https://lore.kernel.org/linux-pci/20190107213248.3034-1-james.prestwood@linux.intel.com
Signed-off-by: James Prestwood <james.prestwood@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: stable@vger.kernel.org # v3.14+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fbdev: sm712fb: fix crashes and garbled display during DPMS modesetting

commit f627caf55b8e735dcec8fa6538e9668632b55276 upstream.

On a Thinkpad s30 (Pentium III / i440MX, Lynx3DM), blanking the display
or starting the X server will crash and freeze the system, or garble the
display.

Experiments showed this problem can mostly be solved by adjusting the
order of register writes. Also, sm712fb failed to consider the difference
of clock frequency when unblanking the display, and programs the clock for
SM712 to SM720.

Fix them by adjusting the order of register writes, and adding an
additional check for SM720 for programming the clock frequency.

Signed-off-by: Yifeng Li <tomli@tomli.me>
Tested-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Cc: Teddy Wang <teddy.wang@siliconmotion.com>
Cc: <stable@vger.kernel.org> # v4.4+
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fbdev: sm712fb: use 1024x768 by default on non-MIPS, fix garbled display

commit 4ed7d2ccb7684510ec5f7a8f7ef534bc6a3d55b2 upstream.

Loongson MIPS netbooks use 1024x600 LCD panels, which is the original
target platform of this driver, but nearly all old x86 laptops have
1024x768. Lighting 768 panels using 600's timings would partially
garble the display. Since it's not possible to distinguish them reliably,
we change the default to 768, but keep 600 as-is on MIPS.

Further, earlier laptops, such as IBM Thinkpad 240X, has a 800x600 LCD
panel, this driver would probably garbled those display. As we don't
have one for testing, the original behavior of the driver is kept as-is,
but the problem has been documented is the comments.

Signed-off-by: Yifeng Li <tomli@tomli.me>
Tested-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Cc: Teddy Wang <teddy.wang@siliconmotion.com>
Cc: <stable@vger.kernel.org> # v4.4+
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fbdev: sm712fb: fix support for 1024x768-16 mode

commit 6053d3a4793e5bde6299ac5388e76a3bf679ff65 upstream.

In order to support the 1024x600 panel on Yeeloong Loongson MIPS
laptop, the original 1024x768-16 table was modified to 1024x600-16,
without leaving the original. It causes problem on x86 laptop as
the 1024x768-16 support was still claimed but not working.

Fix it by introducing the 1024x768-16 mode.

Signed-off-by: Yifeng Li <tomli@tomli.me>
Tested-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Cc: Teddy Wang <teddy.wang@siliconmotion.com>
Cc: <stable@vger.kernel.org> # v4.4+
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fbdev: sm712fb: fix crashes during framebuffer writes by correctly mapping VRAM

commit 9e0e59993df0601cddb95c4f6c61aa3d5e753c00 upstream.

On a Thinkpad s30 (Pentium III / i440MX, Lynx3DM), running fbtest or X
will crash the machine instantly, because the VRAM/framebuffer is not
mapped correctly.

On SM712, the framebuffer starts at the beginning of address space, but
SM720's framebuffer starts at the 1 MiB offset from the beginning. However,
sm712fb fails to take this into account, as a result, writing to the
framebuffer will destroy all the registers and kill the system immediately.
Another problem is the driver assumes 8 MiB of VRAM for SM720, but some
SM720 system, such as this IBM Thinkpad, only has 4 MiB of VRAM.

Fix this problem by removing the hardcoded VRAM size, adding a function to
query the amount of VRAM from register MCR76 on SM720, and adding proper
framebuffer offset.

Please note that the memory map may have additional problems on Big-Endian
system, which is not available for testing by myself. But I highly suspect
that the original code is also broken on Big-Endian machines for SM720, so
at least we are not making the problem worse. More, the driver also assumed
SM710/SM712 has 4 MiB of VRAM, but it has a 2 MiB version as well, and used
in earlier laptops, such as IBM Thinkpad 240X, the driver would probably
crash on them. I've never seen one of those machines and cannot fix it, but
I have documented these problems in the comments.

Signed-off-by: Yifeng Li <tomli@tomli.me>
Tested-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Cc: Teddy Wang <teddy.wang@siliconmotion.com>
Cc: <stable@vger.kernel.org> # v4.4+
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fbdev: sm712fb: fix boot screen glitch when sm712fb replaces VGA

commit ec1587d5073f29820e358f3a383850d61601d981 upstream.

When the machine is booted in VGA mode, loading sm712fb would cause
a glitch of random pixels shown on the screen. To prevent it from
happening, we first clear the entire framebuffer, and we also need
to stop calling smtcfb_setmode() during initialization, the fbdev
layer will call it for us later when it's ready.

Signed-off-by: Yifeng Li <tomli@tomli.me>
Tested-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Cc: Teddy Wang <teddy.wang@siliconmotion.com>
Cc: <stable@vger.kernel.org> # v4.4+
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fbdev: sm712fb: fix white screen of death on reboot, don't set CR3B-CR3F

commit 8069053880e0ee3a75fd6d7e0a30293265fe3de4 upstream.

On a Thinkpad s30 (Pentium III / i440MX, Lynx3DM), rebooting with
sm712fb framebuffer driver would cause a white screen of death on
the next POST, presumably the proper timings for the LCD panel was
not reprogrammed properly by the BIOS.

Experiments showed a few CRTC Scratch Registers, including CRT3D,
CRT3E and CRT3F may be used internally by BIOS as some flags. CRT3B is
a hardware testing register, we shouldn't mess with it. CRT3C has
blanking signal and line compare control, which is not needed for this
driver.

Stop writing to CR3B-CR3F (a.k.a CRT3B-CRT3F) registers. Even if these
registers don't have side-effect on other systems, writing to them is
also highly questionable.

Signed-off-by: Yifeng Li <tomli@tomli.me>
Tested-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Cc: Teddy Wang <teddy.wang@siliconmotion.com>
Cc: <stable@vger.kernel.org> # v4.4+
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fbdev: sm712fb: fix VRAM detection, don't set SR70/71/74/75

commit dcf9070595e100942c539e229dde4770aaeaa4e9 upstream.

On a Thinkpad s30 (Pentium III / i440MX, Lynx3DM), the amount of Video
RAM is not detected correctly by the xf86-video-siliconmotion driver.
This is because sm712fb overwrites the GPR71 Scratch Pad Register, which
is set by BIOS on x86 and used to indicate amount of VRAM.

Other Scratch Pad Registers, including GPR70/74/75, don't have the same
side-effect, but overwriting to them is still questionable, as they are
not related to modesetting.

Stop writing to SR70/71/74/75 (a.k.a GPR70/71/74/75).

Signed-off-by: Yifeng Li <tomli@tomli.me>
Tested-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Cc: Teddy Wang <teddy.wang@siliconmotion.com>
Cc: <stable@vger.kernel.org> # v4.4+
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fbdev: sm712fb: fix brightness control on reboot, don't set SR30

commit 5481115e25e42b9215f2619452aa99c95f08492f upstream.

On a Thinkpad s30 (Pentium III / i440MX, Lynx3DM), rebooting with
sm712fb framebuffer driver would cause the role of brightness up/down
button to swap.

Experiments showed the FPR30 register caused this behavior. Moreover,
even if this register don't have side-effect on other systems, over-
writing it is also highly questionable, since it was originally
configurated by the motherboard manufacturer by hardwiring pull-down
resistors to indicate the type of LCD panel. We should not mess with
it.

Stop writing to the SR30 (a.k.a FPR30) register.

Signed-off-by: Yifeng Li <tomli@tomli.me>
Tested-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Cc: Teddy Wang <teddy.wang@siliconmotion.com>
Cc: <stable@vger.kernel.org> # v4.4+
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

objtool: Allow AR to be overridden with HOSTAR

commit 8ea58f1e8b11cca3087b294779bf5959bf89cc10 upstream.

Currently, this Makefile hardcodes GNU ar, meaning that if it is not
available, there is no way to supply a different one and the build will
fail.

  $ make AR=llvm-ar CC=clang LD=ld.lld HOSTAR=llvm-ar HOSTCC=clang \
         HOSTLD=ld.lld HOSTLDFLAGS=-fuse-ld=lld defconfig modules_prepare
  ...
    AR       /out/tools/objtool/libsubcmd.a
  /bin/sh: 1: ar: not found
  ...

Follow the logic of HOST{CC,LD} and allow the user to specify a
different ar tool via HOSTAR (which is used elsewhere in other
tools/ Makefiles).

Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>
Cc: <stable@vger.kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/80822a9353926c38fd7a152991c6292491a9d0e8.1558028966.git.jpoimboe@redhat.com
Link: https://github.com/ClangBuiltLinux/linux/issues/481
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf intel-pt: Fix sample timestamp wrt non-taken branches

commit 1b6599a9d8e6c9f7e9b0476012383b1777f7fc93 upstream.

The sample timestamp is updated to ensure that the timestamp represents
the time of the sample and not a branch that the decoder is still
walking towards. The sample timestamp is updated when the decoder
returns, but the decoder does not return for non-taken branches. Update
the sample timestamp then also.

Note that commit 3f04d98e972b5 ("perf intel-pt: Improve sample
timestamp") was also a stable fix and appears, for example, in v4.4
stable tree as commit a4ebb58fd124 ("perf intel-pt: Improve sample
timestamp").

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@vger.kernel.org # v4.4+
Fixes: 3f04d98e972b ("perf intel-pt: Improve sample timestamp")
Link: http://lkml.kernel.org/r/20190510124143.27054-4-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf intel-pt: Fix improved sample timestamp

commit 61b6e08dc8e3ea80b7485c9b3f875ddd45c8466b upstream.

The decoder uses its current timestamp in samples. Usually that is a
timestamp that has already passed, but in some cases it is a timestamp
for a branch that the decoder is walking towards, and consequently
hasn't reached.

The intel_pt_sample_time() function decides which is which, but was not
handling TNT packets exactly correctly.

In the case of TNT, the timestamp applies to the first branch, so the
decoder must first walk to that branch.

That means intel_pt_sample_time() should return true for TNT, and this
patch makes that change. However, if the first branch is a non-taken
branch (i.e. a 'N'), then intel_pt_sample_time() needs to return false
for subsequent taken branches in the same TNT packet.

To handle that, introduce a new state INTEL_PT_STATE_TNT_CONT to
distinguish the cases.

Note that commit 3f04d98e972b5 ("perf intel-pt: Improve sample
timestamp") was also a stable fix and appears, for example, in v4.4
stable tree as commit a4ebb58fd124 ("perf intel-pt: Improve sample
timestamp").

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@vger.kernel.org # v4.4+
Fixes: 3f04d98e972b5 ("perf intel-pt: Improve sample timestamp")
Link: http://lkml.kernel.org/r/20190510124143.27054-3-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf intel-pt: Fix instructions sampling rate

commit 7ba8fa20e26eb3c0c04d747f7fd2223694eac4d5 upstream.

The timestamp used to determine if an instruction sample is made, is an
estimate based on the number of instructions since the last known
timestamp. A consequence is that it might go backwards, which results in
extra samples. Change it so that a sample is only made when the
timestamp goes forwards.

Note this does not affect a sampling period of 0 or sampling periods
specified as a count of instructions.

Example:

 Before:

 $ perf script --itrace=i10us
 ls 13812 [003] 2167315.222583:       3270 instructions:u:      7fac71e2e494 __GI___tunables_init+0xf4 (/lib/x86_64-linux-gnu/ld-2.28.so)
 ls 13812 [003] 2167315.222667:      30902 instructions:u:      7fac71e2da0f _dl_cache_libcmp+0x2f (/lib/x86_64-linux-gnu/ld-2.28.so)
 ls 13812 [003] 2167315.222667:         10 instructions:u:      7fac71e2d9ff _dl_cache_libcmp+0x1f (/lib/x86_64-linux-gnu/ld-2.28.so)
 ls 13812 [003] 2167315.222667:          8 instructions:u:      7fac71e2d9ea _dl_cache_libcmp+0xa (/lib/x86_64-linux-gnu/ld-2.28.so)
 ls 13812 [003] 2167315.222667:         14 instructions:u:      7fac71e2d9ea _dl_cache_libcmp+0xa (/lib/x86_64-linux-gnu/ld-2.28.so)
 ls 13812 [003] 2167315.222667:          6 instructions:u:      7fac71e2d9ff _dl_cache_libcmp+0x1f (/lib/x86_64-linux-gnu/ld-2.28.so)
 ls 13812 [003] 2167315.222667:         14 instructions:u:      7fac71e2d9ff _dl_cache_libcmp+0x1f (/lib/x86_64-linux-gnu/ld-2.28.so)
 ls 13812 [003] 2167315.222667:          4 instructions:u:      7fac71e2dab2 _dl_cache_libcmp+0xd2 (/lib/x86_64-linux-gnu/ld-2.28.so)
 ls 13812 [003] 2167315.222728:      16423 instructions:u:      7fac71e2477a _dl_map_object_deps+0x1ba (/lib/x86_64-linux-gnu/ld-2.28.so)
 ls 13812 [003] 2167315.222734:      12731 instructions:u:      7fac71e27938 _dl_name_match_p+0x68 (/lib/x86_64-linux-gnu/ld-2.28.so)
 ...

 After:
 $ perf script --itrace=i10us
 ls 13812 [003] 2167315.222583:       3270 instructions:u:      7fac71e2e494 __GI___tunables_init+0xf4 (/lib/x86_64-linux-gnu/ld-2.28.so)
 ls 13812 [003] 2167315.222667:      30902 instructions:u:      7fac71e2da0f _dl_cache_libcmp+0x2f (/lib/x86_64-linux-gnu/ld-2.28.so)
 ls 13812 [003] 2167315.222728:      16479 instructions:u:      7fac71e2477a _dl_map_object_deps+0x1ba (/lib/x86_64-linux-gnu/ld-2.28.so)
 ...

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@vger.kernel.org
Fixes: f4aa081949e7b ("perf tools: Add Intel PT decoder")
Link: http://lkml.kernel.org/r/20190510124143.27054-2-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

memory: tegra: Fix integer overflow on tick value calculation

commit b906c056b6023c390f18347169071193fda57dde upstream.

Multiplying the Memory Controller clock rate by the tick count results
in an integer overflow and in result the truncated tick value is being
programmed into hardware, such that the GR3D memory client performance is
reduced by two times.

Cc: stable <stable@vger.kernel.org>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tracing: Fix partial reading of trace event's id file

commit cbe08bcbbe787315c425dde284dcb715cfbf3f39 upstream.

When reading only part of the id file, the ppos isn't tracked correctly.
This is taken care by simple_read_from_buffer.

Reading a single byte, and then the next byte would result EOF.

While this seems like not a big deal, this breaks abstractions that
reads information from files unbuffered. See for example
https://github.com/golang/go/issues/29399

This code was mentioned as problematic in
commit cd458ba9d5a5
("tracing: Do not (ab)use trace_seq in event_id_read()")

An example C code that show this bug is:

  #include <stdio.h>
  #include <stdint.h>

  #include <sys/types.h>
  #include <sys/stat.h>
  #include <fcntl.h>
  #include <unistd.h>

  int main(int argc, char **argv) {
    if (argc < 2)
      return 1;
    int fd = open(argv[1], O_RDONLY);
    char c;
    read(fd, &c, 1);
    printf("First  %c\n", c);
    read(fd, &c, 1);
    printf("Second %c\n", c);
  }

Then run with, e.g.

  sudo ./a.out /sys/kernel/debug/tracing/events/tcp/tcp_set_state/id

You'll notice you're getting the first character twice, instead of the
first two characters in the id file.

Link: http://lkml.kernel.org/r/20181231115837.4932-1-elazar@lightbitslabs.com
Cc: Orit Wasserman <orit.was@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: stable@vger.kernel.org
Fixes: 23725aeeab10b ("ftrace: provide an id file for each event")
Signed-off-by: Elazar Leibovich <elazar@lightbitslabs.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ceph: flush dirty inodes before proceeding with remount

commit 00abf69dd24f4444d185982379c5cc3bb7b6d1fc upstream.

xfstest generic/452 was triggering a "Busy inodes after umount" warning.
ceph was allowing the mount to go read-only without first flushing out
dirty inodes in the cache. Ensure we sync out the filesystem before
allowing a remount to proceed.

Cc: stable@vger.kernel.org
Link: http://tracker.ceph.com/issues/39571
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iommu/tegra-smmu: Fix invalid ASID bits on Tegra30/114

commit 43a0541e312f7136e081e6bf58f6c8a2e9672688 upstream.

Both Tegra30 and Tegra114 have 4 ASID's and the corresponding bitfield of
the TLB_FLUSH register differs from later Tegra generations that have 128
ASID's.

In a result the PTE's are now flushed correctly from TLB and this fixes
problems with graphics (randomly failing tests) on Tegra30.

Cc: stable <stable@vger.kernel.org>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fuse: honor RLIMIT_FSIZE in fuse_file_fallocate

commit 0cbade024ba501313da3b7e5dd2a188a6bc491b5 upstream.

fstests generic/228 reported this failure that fuse fallocate does not
honor what 'ulimit -f' has set.

This adds the necessary inode_newsize_ok() check.

Signed-off-by: Liu Bo <bo.liu@linux.alibaba.com>
Fixes: 05ba1f082300 ("fuse: add FALLOCATE operation")
Cc: <stable@vger.kernel.org> # v3.5
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fuse: fix writepages on 32bit

commit 9de5be06d0a89ca97b5ab902694d42dfd2bb77d2 upstream.

Writepage requests were cropped to i_size & 0xffffffff, which meant that
mmaped writes to any file larger than 4G might be silently discarded.

Fix by storing the file size in a properly sized variable (loff_t instead
of size_t).

Reported-by: Antonio SJ Musumeci <trapexit@spawn.link>
Fixes: 6eaf4782eb09 ("fuse: writepages: crop secondary requests")
Cc: <stable@vger.kernel.org> # v3.13
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

clk: tegra: Fix PLLM programming on Tegra124+ when PMC overrides divider

commit 40db569d6769ffa3864fd1b89616b1a7323568a8 upstream.

There are wrongly set parenthesis in the code that are resulting in a
wrong configuration being programmed for PLLM. The original fix was made
by Danny Huang in the downstream kernel. The patch was tested on Nyan Big
Tegra124 chromebook, PLLM rate changing works correctly now and system
doesn't lock up after changing the PLLM rate due to EMC scaling.

Cc: <stable@vger.kernel.org>
Tested-by: Steev Klimaszewski <steev@kali.org>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-By: Peter De Schrijver <pdeschrijver@nvidia.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

NFS4: Fix v4.0 client state corruption when mount

commit f02f3755dbd14fb935d24b14650fff9ba92243b8 upstream.

stat command with soft mount never return after server is stopped.

When alloc a new client, the state of the client will be set to
NFS4CLNT_LEASE_EXPIRED.

When the server is stopped, the state manager will work, and accord
the state to recover. But the state is NFS4CLNT_LEASE_EXPIRED, it
will drain the slot table and lead other task to wait queue, until
the client recovered. Then the stat command is hung.

When discover server trunking, the client will renew the lease,
but check the client state, it lead the client state corruption.

So, we need to call state manager to recover it when detect server
ip trunking.

Signed-off-by: ZhangXiaoxu <zhangxiaoxu5@huawei.com>
Cc: stable@vger.kernel.org
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: ov6650: Fix sensor possibly not detected on probe

commit 933c1320847f5ed6b61a7d10f0a948aa98ccd7b0 upstream.

After removal of clock_start() from before soc_camera_init_i2c() in
soc_camera_probe() by commit 9aea470b399d ("[media] soc-camera: switch
I2C subdevice drivers to use v4l2-clk") introduced in v3.11, the ov6650
driver could no longer probe the sensor successfully because its clock
was no longer turned on in advance.  The issue was initially worked
around by adding that missing clock_start() equivalent to OMAP1 camera
interface driver - the only user of this sensor - but a propoer fix
should be rather implemented in the sensor driver code itself.

Fix the issue by inserting a delay between the clock is turned on and
the sensor I2C registers are read for the first time.

Tested on Amstrad Delta with now out of tree but still locally
maintained omap1_camera host driver.

Fixes: 9aea470b399d ("[media] soc-camera: switch I2C subdevice drivers to use v4l2-clk")

Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cifs: fix strcat buffer overflow and reduce raciness in smb21_set_oplock_level()

commit 6a54b2e002c9d00b398d35724c79f9fe0d9b38fb upstream.

Change strcat to strncpy in the "None" case to fix a buffer overflow
when cinode->oplock is reset to 0 by another thread accessing the same
cinode. It is never valid to append "None" to any other message.

Consolidate multiple writes to cinode->oplock to reduce raciness.

Signed-off-by: Christoph Probst <kernel@probst.it>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
CC: Stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

of: fix clang -Wunsequenced for be32_to_cpu()

commit 440868661f36071886ed360d91de83bd67c73b4f upstream.

Now, make the loop explicit to avoid clang warning.

./include/linux/of.h:238:37: warning: multiple unsequenced modifications
to 'cell' [-Wunsequenced]
                r = (r << 32) | be32_to_cpu(*(cell++));
                                                  ^~
./include/linux/byteorder/generic.h:95:21: note: expanded from macro
'be32_to_cpu'
                    ^
./include/uapi/linux/byteorder/little_endian.h:40:59: note: expanded
from macro '__be32_to_cpu'
                                                          ^
./include/uapi/linux/swab.h:118:21: note: expanded from macro '__swab32'
        ___constant_swab32(x) :                 \
                           ^
./include/uapi/linux/swab.h:18:12: note: expanded from macro
'___constant_swab32'
        (((__u32)(x) & (__u32)0x000000ffUL) << 24) |            \
                  ^

Signed-off-by: Phong Tran <tranmanphong@gmail.com>
Reported-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://github.com/ClangBuiltLinux/linux/issues/460
Suggested-by: David Laight <David.Laight@ACULAB.COM>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Cc: stable@vger.kernel.org
[robh: fix up whitespace]
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

p54: drop device reference count if fails to enable device

commit 8149069db81853570a665f5e5648c0e526dc0e43 upstream.

The function p54p_probe takes an extra reference count of the PCI
device. However, the extra reference count is not dropped when it fails
to enable the PCI device. This patch fixes the bug.

Cc: stable@vger.kernel.org
Signed-off-by: Pan Bian <bianpan2016@163.com>
Acked-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

intel_th: msu: Fix single mode with IOMMU

commit 4e0eaf239fb33ebc671303e2b736fa043462e2f4 upstream.

Currently, the pages that are allocated for the single mode of MSC are not
mapped into the device's dma space and the code is incorrectly using
*_to_phys() in place of a dma address. This fails with IOMMU enabled and
is otherwise bad practice.

Fix the single mode buffer allocation to map the pages into the device's
DMA space.

Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Fixes: ba82664c134e ("intel_th: Add Memory Storage Unit driver")
Cc: stable@vger.kernel.org # v4.4+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

md: add mddev->pers to avoid potential NULL pointer dereference

commit ee37e62191a59d253fc916b9fc763deb777211e2 upstream.

When doing re-add, we need to ensure rdev->mddev->pers is not NULL,
which can avoid potential NULL pointer derefence in fallowing
add_bound_rdev().

Fixes: a6da4ef85cef ("md: re-add a failed disk")
Cc: Xiao Ni <xni@redhat.com>
Cc: NeilBrown <neilb@suse.com>
Cc: <stable@vger.kernel.org> # 4.4+
Reviewed-by: NeilBrown <neilb@suse.com>
Signed-off-by: Yufen Yu <yuyufen@huawei.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

stm class: Fix channel free in stm output free path

commit ee496da4c3915de3232b5f5cd20e21ae3e46fe8d upstream.

Number of free masters is not set correctly in stm
free path. Fix this by properly adding the number
of output channels before setting them to 0 in
stm_output_disclaim().

Currently it is equivalent to doing nothing since
master->nr_free is incremented by 0.

Fixes: 7bd1d4093c2f ("stm class: Introduce an abstraction for System Trace Module devices")
Signed-off-by: Tingwei Zhang <tingwei@codeaurora.org>
Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Cc: stable@vger.kernel.org # v4.4
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

parisc: Rename LEVEL to PA_ASM_LEVEL to avoid name clash with DRBD code

commit 1829dda0e87f4462782ca81be474c7890efe31ce upstream.

LEVEL is a very common word, and now after many years it suddenly
clashed with another LEVEL define in the DRBD code.
Rename it to PA_ASM_LEVEL instead.

Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

parisc: Skip registering LED when running in QEMU

commit b438749044356dd1329c45e9b5a9377b6ea13eb2 upstream.

No need to spend CPU cycles when we run on QEMU.

Signed-off-by: Helge Deller <deller@gmx.de>
CC: stable@vger.kernel.org # v4.9+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

parisc: Export running_on_qemu symbol for modules

commit 3e1120f4b57bc12437048494ab56648edaa5b57d upstream.

Signed-off-by: Helge Deller <deller@gmx.de>
CC: stable@vger.kernel.org # v4.9+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

vsock/virtio: Initialize core virtio vsock before registering the driver

[ Upstream commit ba95e5dfd36647622d8897a2a0470dde60e59ffd ]

Avoid a race in which static variables in net/vmw_vsock/af_vsock.c are
accessed (while handling interrupts) before they are initialized.

[    4.201410] BUG: unable to handle kernel paging request at ffffffffffffffe8
[    4.207829] IP: vsock_addr_equals_addr+0x3/0x20
[    4.211379] PGD 28210067 P4D 28210067 PUD 28212067 PMD 0
[    4.211379] Oops: 0000 [#1] PREEMPT SMP PTI
[    4.211379] Modules linked in:
[    4.211379] CPU: 1 PID: 30 Comm: kworker/1:1 Not tainted 4.14.106-419297-gd7e28cc1f241 #1
[    4.211379] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014
[    4.211379] Workqueue: virtio_vsock virtio_transport_rx_work
[    4.211379] task: ffffa3273d175280 task.stack: ffffaea1800e8000
[    4.211379] RIP: 0010:vsock_addr_equals_addr+0x3/0x20
[    4.211379] RSP: 0000:ffffaea1800ebd28 EFLAGS: 00010286
[    4.211379] RAX: 0000000000000002 RBX: 0000000000000000 RCX: ffffffffb94e42f0
[    4.211379] RDX: 0000000000000400 RSI: ffffffffffffffe0 RDI: ffffaea1800ebdd0
[    4.211379] RBP: ffffaea1800ebd58 R08: 0000000000000001 R09: 0000000000000001
[    4.211379] R10: 0000000000000000 R11: ffffffffb89d5d60 R12: ffffaea1800ebdd0
[    4.211379] R13: 00000000828cbfbf R14: 0000000000000000 R15: ffffaea1800ebdc0
[    4.211379] FS:  0000000000000000(0000) GS:ffffa3273fd00000(0000) knlGS:0000000000000000
[    4.211379] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[    4.211379] CR2: ffffffffffffffe8 CR3: 000000002820e001 CR4: 00000000001606e0
[    4.211379] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[    4.211379] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[    4.211379] Call Trace:
[    4.211379]  ? vsock_find_connected_socket+0x6c/0xe0
[    4.211379]  virtio_transport_recv_pkt+0x15f/0x740
[    4.211379]  ? detach_buf+0x1b5/0x210
[    4.211379]  virtio_transport_rx_work+0xb7/0x140
[    4.211379]  process_one_work+0x1ef/0x480
[    4.211379]  worker_thread+0x312/0x460
[    4.211379]  kthread+0x132/0x140
[    4.211379]  ? process_one_work+0x480/0x480
[    4.211379]  ? kthread_destroy_worker+0xd0/0xd0
[    4.211379]  ret_from_fork+0x35/0x40
[    4.211379] Code: c7 47 08 00 00 00 00 66 c7 07 28 00 c7 47 08 ff ff ff ff c7 47 04 ff ff ff ff c3 0f 1f 00 66 2e 0f 1f 84 00 00 00 00 00 8b 47 08 <3b> 46 08 75 0a 8b 47 04 3b 46 04 0f 94 c0 c3 31 c0 c3 90 66 2e
[    4.211379] RIP: vsock_addr_equals_addr+0x3/0x20 RSP: ffffaea1800ebd28
[    4.211379] CR2: ffffffffffffffe8
[    4.211379] ---[ end trace f31cc4a2e6df3689 ]---
[    4.211379] Kernel panic - not syncing: Fatal exception in interrupt
[    4.211379] Kernel Offset: 0x37000000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff)
[    4.211379] Rebooting in 5 seconds..

Fixes: 22b5c0b63f32 ("vsock/virtio: fix kernel panic after device hot-unplug")
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Stefano Garzarella <sgarzare@redhat.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: kvm@vger.kernel.org
Cc: virtualization@lists.linux-foundation.org
Cc: netdev@vger.kernel.org
Cc: kernel-team@android.com
Cc: stable@vger.kernel.org [4.9+]
Signed-off-by: Jorge E. Moreira <jemoreira@google.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tipc: fix modprobe tipc failed after switch order of device registration

[ Upstream commit 532b0f7ece4cb2ffd24dc723ddf55242d1188e5e ]

Error message printed:
modprobe: ERROR: could not insert 'tipc': Address family not
supported by protocol.
when modprobe tipc after the following patch: switch order of
device registration, commit 7e27e8d6130c
("tipc: switch order of device registration to fix a crash")

Because sock_create_kern(net, AF_TIPC, ...) is called by
tipc_topsrv_create_listener() in the initialization process
of tipc_net_ops, tipc_socket_init() must be execute before that.

I move tipc_socket_init() into function tipc_init_net().

Fixes: 7e27e8d6130c
("tipc: switch order of device registration to fix a crash")
Signed-off-by: Junwei Hu <hujunwei4@huawei.com>
Reported-by: Wang Wang <wangwang2@huawei.com>
Reviewed-by: Kang Zhou <zhoukang7@huawei.com>
Reviewed-by: Suanming Mou <mousuanming@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

vsock/virtio: free packets during the socket release

[ Upstream commit ac03046ece2b158ebd204dfc4896fd9f39f0e6c8 ]

When the socket is released, we should free all packets
queued in the per-socket list in order to avoid a memory
leak.

Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tipc: switch order of device registration to fix a crash

[ Upstream commit 7e27e8d6130c5e88fac9ddec4249f7f2337fe7f8 ]

When tipc is loaded while many processes try to create a TIPC socket,
a crash occurs:
 PANIC: Unable to handle kernel paging request at virtual
 address "dfff20000000021d"
 pc : tipc_sk_create+0x374/0x1180 [tipc]
 lr : tipc_sk_create+0x374/0x1180 [tipc]
   Exception class = DABT (current EL), IL = 32 bits
 Call trace:
  tipc_sk_create+0x374/0x1180 [tipc]
  __sock_create+0x1cc/0x408
  __sys_socket+0xec/0x1f0
  __arm64_sys_socket+0x74/0xa8
 ...

This is due to race between sock_create and unfinished
register_pernet_device. tipc_sk_insert tries to do
"net_generic(net, tipc_net_id)".
but tipc_net_id is not initialized yet.

So switch the order of the two to close the race.

This can be reproduced with multiple processes doing socket(AF_TIPC, ...)
and one process doing module removal.

Fixes: a62fbccecd62 ("tipc: make subscriber server support net namespace")
Signed-off-by: Junwei Hu <hujunwei4@huawei.com>
Reported-by: Wang Wang <wangwang2@huawei.com>
Reviewed-by: Xiaogang Wang <wangxiaogang3@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ppp: deflate: Fix possible crash in deflate_init

[ Upstream commit 3ebe1bca58c85325c97a22d4fc3f5b5420752e6f ]

BUG: unable to handle kernel paging request at ffffffffa018f000
PGD 3270067 P4D 3270067 PUD 3271063 PMD 2307eb067 PTE 0
Oops: 0000 [#1] PREEMPT SMP
CPU: 0 PID: 4138 Comm: modprobe Not tainted 5.1.0-rc7+ #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org 04/01/2014
RIP: 0010:ppp_register_compressor+0x3e/0xd0 [ppp_generic]
Code: 98 4a 3f e2 48 8b 15 c1 67 00 00 41 8b 0c 24 48 81 fa 40 f0 19 a0
75 0e eb 35 48 8b 12 48 81 fa 40 f0 19 a0 74
RSP: 0018:ffffc90000d93c68 EFLAGS: 00010287
RAX: ffffffffa018f000 RBX: ffffffffa01a3000 RCX: 000000000000001a
RDX: ffff888230c750a0 RSI: 0000000000000000 RDI: ffffffffa019f000
RBP: ffffc90000d93c80 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: ffffffffa0194080
R13: ffff88822ee1a700 R14: 0000000000000000 R15: ffffc90000d93e78
FS:  00007f2339557540(0000) GS:ffff888237a00000(0000)
knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffffffa018f000 CR3: 000000022bde4000 CR4: 00000000000006f0
Call Trace:
 ? 0xffffffffa01a3000
 deflate_init+0x11/0x1000 [ppp_deflate]
 ? 0xffffffffa01a3000
 do_one_initcall+0x6c/0x3cc
 ? kmem_cache_alloc_trace+0x248/0x3b0
 do_init_module+0x5b/0x1f1
 load_module+0x1db1/0x2690
 ? m_show+0x1d0/0x1d0
 __do_sys_finit_module+0xc5/0xd0
 __x64_sys_finit_module+0x15/0x20
 do_syscall_64+0x6b/0x1d0
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

If ppp_deflate fails to register in deflate_init,
module initialization failed out, however
ppp_deflate_draft may has been regiestred and not
unregistered before return.
Then the seconed modprobe will trigger crash like this.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net/mlx4_core: Change the error print to info print

[ Upstream commit 00f9fec48157f3734e52130a119846e67a12314b ]

The error print within mlx4_flow_steer_promisc_add() should
be a info print.

Fixes: 592e49dda812 ('net/mlx4: Implement promiscuous mode with device managed flow-steering')
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: avoid weird emergency message

[ Upstream commit d7c04b05c9ca14c55309eb139430283a45c4c25f ]

When host is under high stress, it is very possible thread
running netdev_wait_allrefs() returns from msleep(250)
10 seconds late.

This leads to these messages in the syslog :

[...] unregister_netdevice: waiting for syz_tun to become free. Usage count = 0

If the device refcount is zero, the wait is over.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

RTC: hym8563: update driver