Shay Drory [Sun, 14 Nov 2021 11:01:21 +0000 (13:01 +0200)]
net/mlx5: Introduce control IRQ request API
Currently, IRQ layer have a separate flow for ctrl and comp IRQs, and
the distinction between ctrl and comp IRQs is done in the IRQ layer.
In order to ease the coding and maintenance of the IRQ layer,
introduce a new API for requesting control IRQs -
mlx5_ctrl_irq_request(struct mlx5_core_dev *dev).
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Saeed Mahameed [Thu, 23 Dec 2021 19:28:09 +0000 (11:28 -0800)]
net/mlx5: mlx5e_hv_vhca_stats_create return type to void
Callers of this functions ignore its return value, as reported by
Wang Qing, in one of the return paths, it returns positive values.
Since return value is ignored anyways, void out the return type of the
function.
Reported-by: Wang Qing <wangqing@vivo.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Daniel Borkmann [Thu, 6 Jan 2022 00:46:06 +0000 (01:46 +0100)]
veth: Do not record rx queue hint in veth_xmit
Laurent reported that they have seen a significant amount of TCP retransmissions
at high throughput from applications residing in network namespaces talking to
the outside world via veths. The drops were seen on the qdisc layer (fq_codel,
as per systemd default) of the phys device such as ena or virtio_net due to all
traffic hitting a _single_ TX queue _despite_ multi-queue device. (Note that the
setup was _not_ using XDP on veths as the issue is generic.)
More specifically, after
edbea9220251 ("veth: Store queue_mapping independently
of XDP prog presence") which made it all the way back to v4.19.184+,
skb_record_rx_queue() would set skb->queue_mapping to 1 (given 1 RX and 1 TX
queue by default for veths) instead of leaving at 0.
This is eventually retained and callbacks like ena_select_queue() will also pick
single queue via netdev_core_pick_tx()'s ndo_select_queue() once all the traffic
is forwarded to that device via upper stack or other means. Similarly, for others
not implementing ndo_select_queue() if XPS is disabled, netdev_pick_tx() might
call into the skb_tx_hash() and check for prior skb_rx_queue_recorded() as well.
In general, it is a _bad_ idea for virtual devices like veth to mess around with
queue selection [by default]. Given dev->real_num_tx_queues is by default 1,
the skb->queue_mapping was left untouched, and so prior to
edbea9220251 the
netdev_core_pick_tx() could do its job upon __dev_queue_xmit() on the phys device.
Unbreak this and restore prior behavior by removing the skb_record_rx_queue()
from veth_xmit() altogether.
If the veth peer has an XDP program attached, then it would return the first RX
queue index in xdp_md->rx_queue_index (unless configured in non-default manner).
However, this is still better than breaking the generic case.
Fixes:
edbea9220251 ("veth: Store queue_mapping independently of XDP prog presence")
Fixes:
638264dc9022 ("veth: Support per queue XDP ring")
Reported-by: Laurent Bernaille <laurent.bernaille@datadoghq.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Cc: Toshiaki Makita <toshiaki.makita1@gmail.com>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: Willem de Bruijn <willemb@google.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Toshiaki Makita <toshiaki.makita1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Greg Kroah-Hartman [Wed, 5 Jan 2022 18:41:01 +0000 (19:41 +0100)]
ethernet: ibmveth: use default_groups in kobj_type
There are currently 2 ways to create a set of sysfs files for a
kobj_type, through the default_attrs field, and the default_groups
field. Move the ibmveth sysfs code to use default_groups
field which has been the preferred way since
aa30f47cf666 ("kobject: Add
support for default attribute groups to kobj_type") so that we can soon
get rid of the obsolete default_attrs field.
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Cristobal Forno <cforno12@linux.ibm.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: netdev@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiapeng Chong [Wed, 5 Jan 2022 15:22:37 +0000 (23:22 +0800)]
sfc: Use swap() instead of open coding it
Clean the following coccicheck warning:
./drivers/net/ethernet/sfc/efx_channels.c:870:36-37: WARNING opportunity
for swap().
./drivers/net/ethernet/sfc/efx_channels.c:824:36-37: WARNING opportunity
for swap().
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Acked-by: Martin Habets <habetsm.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tom Rix [Wed, 5 Jan 2022 14:10:20 +0000 (06:10 -0800)]
ethtool: use phydev variable
In ethtool_get_phy_stats(), the phydev varaible is set to
dev->phydev but dev->phydev is still used. Replace
dev->phydev uses with phydev.
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Russell King (Oracle) [Wed, 5 Jan 2022 13:15:15 +0000 (13:15 +0000)]
net: macb: use .mac_select_pcs() interface
Convert the PCS selection to use mac_select_pcs, which allows the PCS
to perform any validation it needs.
We must use separate phylink_pcs instances for the USX and SGMII PCS,
rather than just changing the "ops" pointer before re-setting it to
phylink as this interface queries the PCS, rather than requesting it
to be changed.
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Coco Li [Wed, 5 Jan 2022 10:48:38 +0000 (02:48 -0800)]
gro: add ability to control gro max packet size
Eric Dumazet suggested to allow users to modify max GRO packet size.
We have seen GRO being disabled by users of appliances (such as
wifi access points) because of claimed bufferbloat issues,
or some work arounds in sch_cake, to split GRO/GSO packets.
Instead of disabling GRO completely, one can chose to limit
the maximum packet size of GRO packets, depending on their
latency constraints.
This patch adds a per device gro_max_size attribute
that can be changed with ip link command.
ip link set dev eth0 gro_max_size 16000
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Coco Li <lixiaoyan@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Miroslav Lichvar [Wed, 5 Jan 2022 10:33:26 +0000 (11:33 +0100)]
net: fix SOF_TIMESTAMPING_BIND_PHC to work with multiple sockets
When multiple sockets using the SOF_TIMESTAMPING_BIND_PHC flag received
a packet with a hardware timestamp (e.g. multiple PTP instances in
different PTP domains using the UDPv4/v6 multicast or L2 transport),
the timestamps received on some sockets were corrupted due to repeated
conversion of the same timestamp (by the same or different vclocks).
Fix ptp_convert_timestamp() to not modify the shared skb timestamp
and return the converted timestamp as a ktime_t instead. If the
conversion fails, return 0 to not confuse the application with
timestamps corresponding to an unexpected PHC.
Fixes:
d7c088265588 ("net: socket: support hardware timestamp conversion to PHC bound")
Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
Cc: Yangbo Lu <yangbo.lu@nxp.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Wed, 5 Jan 2022 22:11:50 +0000 (00:11 +0200)]
net: dsa: warn about dsa_port and dsa_switch bit fields being non atomic
As discussed during review here:
https://patchwork.kernel.org/project/netdevbpf/patch/
20220105132141.2648876-3-vladimir.oltean@nxp.com/
we should inform developers about pitfalls of concurrent access to the
boolean properties of dsa_switch and dsa_port, now that they've been
converted to bit fields. No other measure than a comment needs to be
taken, since the code paths that update these bit fields are not
concurrent with each other.
Suggested-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Wed, 5 Jan 2022 22:11:49 +0000 (00:11 +0200)]
net: dsa: don't enumerate dsa_switch and dsa_port bit fields using commas
This is a cosmetic incremental fixup to commits
7787ff776398 ("net: dsa: merge all bools of struct dsa_switch into a single u32")
bde82f389af1 ("net: dsa: merge all bools of struct dsa_port into a single u8")
The desire to make this change was enunciated after posting these
patches here:
https://patchwork.kernel.org/project/netdevbpf/cover/
20220105132141.2648876-1-vladimir.oltean@nxp.com/
but due to a slight timing overlap (message posted at 2:28 p.m. UTC,
merge commit is at 2:46 p.m. UTC), that comment was missed and the
changes were applied as-is.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 6 Jan 2022 11:59:10 +0000 (11:59 +0000)]
Merge branch 'dsa-init-cleanups'
Vladimir Oltean says:
====================
DSA initialization cleanups
These patches contain miscellaneous work that makes the DSA init code
path symmetric with the teardown path, and some additional patches
carried by Ansuel Smith for his register access over Ethernet work, but
those patches can be applied as-is too.
https://patchwork.kernel.org/project/netdevbpf/patch/
20211214224409.5770-3-ansuelsmth@gmail.com/
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Wed, 5 Jan 2022 23:11:17 +0000 (01:11 +0200)]
net: dsa: setup master before ports
It is said that as soon as a network interface is registered, all its
resources should have already been prepared, so that it is available for
sending and receiving traffic. One of the resources needed by a DSA
slave interface is the master.
dsa_tree_setup
-> dsa_tree_setup_ports
-> dsa_port_setup
-> dsa_slave_create
-> register_netdevice
-> dsa_tree_setup_master
-> dsa_master_setup
-> sets up master->dsa_ptr, which enables reception
Therefore, there is a short period of time after register_netdevice()
during which the master isn't prepared to pass traffic to the DSA layer
(master->dsa_ptr is checked by eth_type_trans). Same thing during
unregistration, there is a time frame in which packets might be missed.
Note that this change opens us to another race: dsa_master_find_slave()
will get invoked potentially earlier than the slave creation, and later
than the slave deletion. Since dp->slave starts off as a NULL pointer,
the earlier calls aren't a problem, but the later calls are. To avoid
use-after-free, we should zeroize dp->slave before calling
dsa_slave_destroy().
In practice I cannot really test real life improvements brought by this
change, since in my systems, netdevice creation races with PHY autoneg
which takes a few seconds to complete, and that masks quite a few races.
Effects might be noticeable in a setup with fixed links all the way to
an external system.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Wed, 5 Jan 2022 23:11:16 +0000 (01:11 +0200)]
net: dsa: first set up shared ports, then non-shared ports
After commit
a57d8c217aad ("net: dsa: flush switchdev workqueue before
tearing down CPU/DSA ports"), the port setup and teardown procedure
became asymmetric.
The fact of the matter is that user ports need the shared ports to be up
before they can be used for CPU-initiated termination. And since we
register net devices for the user ports, those won't be functional until
we also call the setup for the shared (CPU, DSA) ports. But we may do
that later, depending on the port numbering scheme of the hardware we
are dealing with.
It just makes sense that all shared ports are brought up before any user
port is. I can't pinpoint any issue due to the current behavior, but
let's change it nonetheless, for consistency's sake.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Wed, 5 Jan 2022 23:11:15 +0000 (01:11 +0200)]
net: dsa: hold rtnl_mutex when calling dsa_master_{setup,teardown}
DSA needs to simulate master tracking events when a binding is first
with a DSA master established and torn down, in order to give drivers
the simplifying guarantee that ->master_state_change calls are made
only when the master's readiness state to pass traffic changes.
master_state_change() provide a operational bool that DSA driver can use
to understand if DSA master is operational or not.
To avoid races, we need to block the reception of
NETDEV_UP/NETDEV_CHANGE/NETDEV_GOING_DOWN events in the netdev notifier
chain while we are changing the master's dev->dsa_ptr (this changes what
netdev_uses_dsa(dev) reports).
The dsa_master_setup() and dsa_master_teardown() functions optionally
require the rtnl_mutex to be held, if the tagger needs the master to be
promiscuous, these functions call dev_set_promiscuity(). Move the
rtnl_lock() from that function and make it top-level.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Wed, 5 Jan 2022 23:11:14 +0000 (01:11 +0200)]
net: dsa: stop updating master MTU from master.c
At present there are two paths for changing the MTU of the DSA master.
The first is:
dsa_tree_setup
-> dsa_tree_setup_ports
-> dsa_port_setup
-> dsa_slave_create
-> dsa_slave_change_mtu
-> dev_set_mtu(master)
The second is:
dsa_tree_setup
-> dsa_tree_setup_master
-> dsa_master_setup
-> dev_set_mtu(dev)
So the dev_set_mtu() call from dsa_master_setup() has been effectively
superseded by the dsa_slave_change_mtu(slave_dev, ETH_DATA_LEN) that is
done from dsa_slave_create() for each user port. The later function also
updates the master MTU according to the largest user port MTU from the
tree. Therefore, updating the master MTU through a separate code path
isn't needed.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Wed, 5 Jan 2022 23:11:13 +0000 (01:11 +0200)]
net: dsa: merge rtnl_lock sections in dsa_slave_create
Currently dsa_slave_create() has two sequences of rtnl_lock/rtnl_unlock
in a row. Remove the rtnl_unlock() and rtnl_lock() in between, such that
the operation can execute slighly faster.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Wed, 5 Jan 2022 23:11:12 +0000 (01:11 +0200)]
net: dsa: reorder PHY initialization with MTU setup in slave.c
In dsa_slave_create() there are 2 sections that take rtnl_lock():
MTU change and netdev registration. They are separated by PHY
initialization.
There isn't any strict ordering requirement except for the fact that
netdev registration should be last. Therefore, we can perform the MTU
change a bit later, after the PHY setup. A future change will then be
able to merge the two rtnl_lock sections into one.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 6 Jan 2022 11:54:20 +0000 (11:54 +0000)]
Merge branch 'master' of git://git./linux/kernel/git/klassert/ipsec-next
Steffen Klassert says:
====================
pull request (net-next): ipsec-next 2022-01-06
1) Fix some clang_analyzer warnings about never read variables.
From luo penghao.
2) Check for pols[0] only once in xfrm_expand_policies().
From Jean Sacren.
3) The SA curlft.use_time was updated only on SA cration time.
Update whenever the SA is used. From Antony Antony
4) Add support for SM3 secure hash.
From Xu Jia.
5) Add support for SM4 symmetric cipher algorithm.
From Xu Jia.
6) Add a rate limit for SA mapping change messages.
From Antony Antony.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Thu, 6 Jan 2022 01:18:07 +0000 (17:18 -0800)]
Merge branch 'net-lantiq_xrx200-improve-ethernet-performance'
Aleksander Jan Bajkowski says:
====================
net: lantiq_xrx200: improve ethernet performance
This patchset improves Ethernet performance by 15%.
NAT Performance results on BT Home Hub 5A (kernel 5.10.89, mtu 1500):
Down Up
Before 539 Mbps 599 Mbps
After 624 Mbps 695 Mbps
====================
Link: https://lore.kernel.org/r/20220104151144.181736-1-olek2@wp.pl
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Aleksander Jan Bajkowski [Tue, 4 Jan 2022 15:11:44 +0000 (16:11 +0100)]
net: lantiq_xrx200: convert to build_skb
We can increase the efficiency of rx path by using buffers to receive
packets then build SKBs around them just before passing into the network
stack. In contrast, preallocating SKBs too early reduces CPU cache
efficiency.
NAT Performance results on BT Home Hub 5A (kernel 5.10.89, mtu 1500):
Down Up
Before 577 Mbps 648 Mbps
After 624 Mbps 695 Mbps
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Aleksander Jan Bajkowski [Tue, 4 Jan 2022 15:11:43 +0000 (16:11 +0100)]
net: lantiq_xrx200: increase napi poll weigth
NAT Performance results on BT Home Hub 5A (kernel 5.10.89, mtu 1500):
Down Up
Before 545 Mbps 625 Mbps
After 577 Mbps 648 Mbps
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Aleksander Jan Bajkowski [Tue, 4 Jan 2022 15:11:42 +0000 (16:11 +0100)]
MIPS: lantiq: dma: increase descritor count
NAT Performance results on BT Home Hub 5A (kernel 5.10.89, mtu 1500):
Down Up
Before 539 Mbps 599 Mbps
After 545 Mbps 625 Mbps
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Miroslav Lichvar [Wed, 5 Jan 2022 15:25:06 +0000 (16:25 +0100)]
testptp: set pin function before other requests
When the -L option of the testptp utility is specified with other
options (e.g. -p to enable PPS output), the user probably wants to
apply it to the pin configured by the -L option.
Reorder the code to set the pin function before other function requests
to avoid confusing users.
Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Link: https://lore.kernel.org/r/20220105152506.3256026-1-mlichvar@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Wed, 5 Jan 2022 22:36:10 +0000 (14:36 -0800)]
Merge git://git./linux/kernel/git/netdev/net
No conflicts.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Linus Torvalds [Wed, 5 Jan 2022 22:08:56 +0000 (14:08 -0800)]
Merge tag 'net-5.16-final' of git://git./linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski"
"Networking fixes, including fixes from bpf, and WiFi. One last pull
request, turns out some of the recent fixes did more harm than good.
Current release - regressions:
- Revert "xsk: Do not sleep in poll() when need_wakeup set", made the
problem worse
- Revert "net: phy: fixed_phy: Fix NULL vs IS_ERR() checking in
__fixed_phy_register", broke EPROBE_DEFER handling
- Revert "net: usb: r8152: Add MAC pass-through support for more
Lenovo Docks", broke setups without a Lenovo dock
Current release - new code bugs:
- selftests: set amt.sh executable
Previous releases - regressions:
- batman-adv: mcast: don't send link-local multicast to mcast routers
Previous releases - always broken:
- ipv4/ipv6: check attribute length for RTA_FLOW / RTA_GATEWAY
- sctp: hold endpoint before calling cb in
sctp_transport_lookup_process
- mac80211: mesh: embed mesh_paths and mpp_paths into
ieee80211_if_mesh to avoid complicated handling of sub-object
allocation failures
- seg6: fix traceroute in the presence of SRv6
- tipc: fix a kernel-infoleak in __tipc_sendmsg()"
* tag 'net-5.16-final' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (36 commits)
selftests: set amt.sh executable
Revert "net: usb: r8152: Add MAC passthrough support for more Lenovo Docks"
sfc: The RX page_ring is optional
iavf: Fix limit of total number of queues to active queues of VF
i40e: Fix incorrect netdev's real number of RX/TX queues
i40e: Fix for displaying message regarding NVM version
i40e: fix use-after-free in i40e_sync_filters_subtask()
i40e: Fix to not show opcode msg on unsuccessful VF MAC change
ieee802154: atusb: fix uninit value in atusb_set_extended_addr
mac80211: mesh: embedd mesh_paths and mpp_paths into ieee80211_if_mesh
mac80211: initialize variable have_higher_than_11mbit
sch_qfq: prevent shift-out-of-bounds in qfq_init_qdisc
netrom: fix copying in user data in nr_setsockopt
udp6: Use Segment Routing Header for dest address if present
icmp: ICMPV6: Examine invoking packet for Segment Route Headers.
seg6: export get_srh() for ICMP handling
Revert "net: phy: fixed_phy: Fix NULL vs IS_ERR() checking in __fixed_phy_register"
ipv6: Do cleanup if attribute validation fails in multipath route
ipv6: Continue processing multipath route even if gateway attribute is invalid
net/fsl: Remove leftover definition in xgmac_mdio
...
Russell King (Oracle) [Tue, 4 Jan 2022 16:38:31 +0000 (16:38 +0000)]
net: gemini: allow any RGMII interface mode
The four RGMII interface modes take care of the required RGMII delay
configuration at the PHY and should not be limited by the network MAC
driver. Sadly, gemini was only permitting RGMII mode with no delays,
which would require the required delay to be inserted via PCB tracking
or by the MAC.
However, there are designs that require the PHY to add the delay, which
is impossible without Gemini permitting the other three PHY interface
modes. Fix the driver to allow these.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Link: https://lore.kernel.org/r/E1n4mpT-002PLd-Ha@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Wed, 5 Jan 2022 18:30:31 +0000 (10:30 -0800)]
Merge branch 'fix-rgmii-delays-for-88e1118'
Russell King says:
====================
Fix RGMII delays for 88E1118
This series fixes the RGMII delays for 88E1118 Marvell PHYs, after
a report by Corentin Labbe that the Marvell driver fails to work.
Patch 1 cleans up the paged register accesses in m88e1118_config_init()
and patch 2 adds the RGMII delay configuration.
This comes with an element of risk as existing DT may need to be fixed
for this in a similar way as we have done in the recent past for other
PHY drivers that have misinterpreted the RGMII interface modes.
====================
Link: https://lore.kernel.org/r/YdR3wYFkm4eJApwb@shell.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Russell King (Oracle) [Tue, 4 Jan 2022 16:38:19 +0000 (16:38 +0000)]
net: phy: marvell: configure RGMII delays for 88E1118
Corentin Labbe reports that the SSI 1328 does not work when allowing
the PHY to operate at gigabit speeds, but does work with the generic
PHY driver.
This appears to be because m88e1118_config_init() writes a fixed value
to the MSCR register, claiming that this is to enable 1G speeds.
However, this always sets bits 4 and 5, enabling RGMII transmit and
receive delays. The suspicion is that the original board this was
added for required the delays to make 1G speeds work.
Add the necessary configuration for RGMII delays for the 88E1118 to
bring this into line with the requirements for RGMII support, and thus
make the SSI 1328 work.
Corentin Labbe has tested this on gemini-ssi1328 and gemini-ns2502.
Reported-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Russell King (Oracle) [Tue, 4 Jan 2022 16:38:13 +0000 (16:38 +0000)]
net: phy: marvell: use phy_write_paged() to set MSCR
Use phy_write_paged() in m88e1118_config_init() to set the MSCR value.
We leave the other paged write for the LEDs in case the DT register
parsing is relying on this page.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Taehee Yoo [Wed, 5 Jan 2022 14:44:36 +0000 (14:44 +0000)]
selftests: set amt.sh executable
amt.sh test script will not work because it doesn't have execution
permission. So, it adds execution permission.
Reported-by: Hangbin Liu <liuhangbin@gmail.com>
Fixes:
c08e8baea78e ("selftests: add amt interface selftest script")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Link: https://lore.kernel.org/r/20220105144436.13415-1-ap420073@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Aaron Ma [Wed, 5 Jan 2022 15:51:02 +0000 (23:51 +0800)]
Revert "net: usb: r8152: Add MAC passthrough support for more Lenovo Docks"
This reverts commit
f77b83b5bbab53d2be339184838b19ed2c62c0a5.
This change breaks multiple usb to ethernet dongles attached on Lenovo
USB hub.
Fixes:
f77b83b5bbab ("net: usb: r8152: Add MAC passthrough support for more Lenovo Docks")
Signed-off-by: Aaron Ma <aaron.ma@canonical.com>
Link: https://lore.kernel.org/r/20220105155102.8557-1-aaron.ma@canonical.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eric Dumazet [Wed, 5 Jan 2022 17:08:49 +0000 (09:08 -0800)]
netlink: do not allocate a device refcount tracker in ethnl_default_notify()
As reported by Johannes, the tracker allocated in
ethnl_default_notify() is not really needed, as this
function is not expected to change a device reference count.
Fixes:
e4b8954074f6 ("netlink: add net device refcount tracker to struct ethnl_req_info")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Johannes Berg <johannes@sipsolutions.net>
Tested-by: Johannes Berg <johannes@sipsolutions.net>
Link: https://lore.kernel.org/r/20220105170849.2610470-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eric Dumazet [Tue, 4 Jan 2022 17:04:39 +0000 (09:04 -0800)]
net/sched: add missing tracker information in qdisc_create()
qdisc_create() error path needs to use dev_put_track()
because qdisc_alloc() allocated the tracker.
Fixes:
606509f27f67 ("net/sched: add net device refcount tracker to struct Qdisc")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20220104170439.3790052-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Linus Torvalds [Wed, 5 Jan 2022 17:30:10 +0000 (09:30 -0800)]
Merge tag 'gpio-fixes-for-v5.16' of git://git./linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
"Here are two last fixes for this release cycle from the GPIO
subsystem:
- fix irq offset calculation in gpio-aspeed-sgpio
- update the MAINTAINERS entry for gpio-brcmstb"
* tag 'gpio-fixes-for-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
MAINTAINERS: update gpio-brcmstb maintainers
gpio: gpio-aspeed-sgpio: Fix wrong hwirq base in irq handler
Jakub Kicinski [Wed, 5 Jan 2022 17:00:11 +0000 (09:00 -0800)]
Merge tag 'ieee802154-for-net-2022-01-05' of git://git./linux/kernel/git/sschmidt/wpan
Stefan Schmidt says:
====================
pull-request: ieee802154 for net 2022-01-05
Below I have a last minute fix for the atusb driver.
Pavel fixes a KASAN uninit report for the driver. This version is the
minimal impact fix to ease backporting. A bigger rework of the driver to
avoid potential similar problems is ongoing and will come through net-next
when ready.
* tag 'ieee802154-for-net-2022-01-05' of git://git.kernel.org/pub/scm/linux/kernel/git/sschmidt/wpan:
ieee802154: atusb: fix uninit value in atusb_set_extended_addr
====================
Link: https://lore.kernel.org/r/20220105153914.512305-1-stefan@datenfreihafen.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
David S. Miller [Wed, 5 Jan 2022 15:04:51 +0000 (15:04 +0000)]
Merge branch 'dsa-notifier-cleanup'
Vladimir Oltean says:
====================
DSA cross-chip notifier cleanup
This series deletes the no-op cross-chip notifier support for MRP and
HSR, features which were introduced relatively recently and did not get
full review at the time. The new code is functionally equivalent, but
simpler.
Cc: Horatiu Vultur <horatiu.vultur@microchip.com>
Cc: George McCollister <george.mccollister@gmail.com>
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Wed, 5 Jan 2022 13:18:13 +0000 (15:18 +0200)]
net: dsa: remove cross-chip support for HSR
The cross-chip notifiers for HSR are bypass operations, meaning that
even though all switches in a tree are notified, only the switch
specified in the info structure is targeted.
We can eliminate the unnecessary complexity by deleting the cross-chip
notifier logic and calling the ds->ops straight from port.c.
Cc: George McCollister <george.mccollister@gmail.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: George McCollister <george.mccollister@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Wed, 5 Jan 2022 13:18:12 +0000 (15:18 +0200)]
net: dsa: remove cross-chip support for MRP
The cross-chip notifiers for MRP are bypass operations, meaning that
even though all switches in a tree are notified, only the switch
specified in the info structure is targeted.
We can eliminate the unnecessary complexity by deleting the cross-chip
notifier logic and calling the ds->ops straight from port.c.
Cc: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Wed, 5 Jan 2022 13:18:11 +0000 (15:18 +0200)]
net: dsa: fix incorrect function pointer check for MRP ring roles
The cross-chip notifier boilerplate code meant to check the presence of
ds->ops->port_mrp_add_ring_role before calling it, but checked
ds->ops->port_mrp_add instead, before calling
ds->ops->port_mrp_add_ring_role.
Therefore, a driver which implements one operation but not the other
would trigger a NULL pointer dereference.
There isn't any such driver in DSA yet, so there is no reason to
backport the change. Issue found through code inspection.
Cc: Horatiu Vultur <horatiu.vultur@microchip.com>
Fixes:
c595c4330da0 ("net: dsa: add MRP support")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Danielle Ratson [Wed, 5 Jan 2022 10:22:27 +0000 (12:22 +0200)]
mlxsw: pci: Avoid flow control for EMAD packets
Locally generated packets ingress the device through its CPU port. When
the CPU port is congested and there are not enough credits in its
headroom buffer, packets can be dropped.
While this might be acceptable for data packets that traverse the
network, configuration packets exchanged between the host and the device
(EMADs) should not be subjected to this flow control.
The "sdq_lp" bit in the SDQ (Send Descriptor Queue) context allows the
host to instruct the device to treat packets sent on this queue as
"local processing" and always process them, regardless of the state of
the CPU port's headroom.
Add the definition of this bit and set it for the dedicated SDQ reserved
for the transmission of EMAD packets. This makes the "local processing"
bit in the WQE (Work Queue Element) redundant, so clear it.
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 5 Jan 2022 14:49:37 +0000 (14:49 +0000)]
Merge tag 'linux-can-next-for-5.17-
20220105' of git://git./linux/kernel/git/mkl/linux-can-next
Marc Kleine-Budde says:
====================
pull-request: can-next 2022-01-05
this is a pull request of 15 patches for net-next/master.
The first patch is by me and removed an unused variable from the
usb_8dev driver.
Andy Shevchenko contributes a patch for the mcp251x driver, which
removes an unneeded assignment.
Jimmy Assarsson's patch for the kvaser_usb makes use of units.h in the
assignment of frequencies.
Lad Prabhakar provides 2 patches, converting the ti_hecc and the
sja1000 driver to make use of platform_get_irq().
The 10 remaining patches are by Vincent Mailhol. First the etas_es58x
driver populates the net_device::dev_port. The next 5 patches cleanup
the handling of CAN error and CAN RTR messages of all drivers. The
remaining 4 patches enhance the CAN controller mode flag handling and
export it via netlink to user space.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 5 Jan 2022 14:46:23 +0000 (14:46 +0000)]
Merge branch 'dsa-cleanups'
Vladimir Oltean says:
====================
Cleanup to main DSA structures
This series contains changes that do the following:
- struct dsa_port reduced from 576 to 544 bytes, and first cache line a
bit better organized
- struct dsa_switch from 160 to 136 bytes, and first cache line a bit
better organized
- struct dsa_switch_tree from 112 to 104 bytes, and first cache line a
bit better organized
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Wed, 5 Jan 2022 13:21:41 +0000 (15:21 +0200)]
net: dsa: combine two holes in struct dsa_switch_tree
There is a 7 byte hole after dst->setup and a 4 byte hole after
dst->default_proto. Combining them, we have a single hole of just 3
bytes on 64 bit machines.
Before:
pahole -C dsa_switch_tree net/dsa/slave.o
struct dsa_switch_tree {
struct list_head list; /* 0 16 */
struct list_head ports; /* 16 16 */
struct raw_notifier_head nh; /* 32 8 */
unsigned int index; /* 40 4 */
struct kref refcount; /* 44 4 */
struct net_device * * lags; /* 48 8 */
bool setup; /* 56 1 */
/* XXX 7 bytes hole, try to pack */
/* --- cacheline 1 boundary (64 bytes) --- */
const struct dsa_device_ops * tag_ops; /* 64 8 */
enum dsa_tag_protocol default_proto; /* 72 4 */
/* XXX 4 bytes hole, try to pack */
struct dsa_platform_data * pd; /* 80 8 */
struct list_head rtable; /* 88 16 */
unsigned int lags_len; /* 104 4 */
unsigned int last_switch; /* 108 4 */
/* size: 112, cachelines: 2, members: 13 */
/* sum members: 101, holes: 2, sum holes: 11 */
/* last cacheline: 48 bytes */
};
After:
pahole -C dsa_switch_tree net/dsa/slave.o
struct dsa_switch_tree {
struct list_head list; /* 0 16 */
struct list_head ports; /* 16 16 */
struct raw_notifier_head nh; /* 32 8 */
unsigned int index; /* 40 4 */
struct kref refcount; /* 44 4 */
struct net_device * * lags; /* 48 8 */
const struct dsa_device_ops * tag_ops; /* 56 8 */
/* --- cacheline 1 boundary (64 bytes) --- */
enum dsa_tag_protocol default_proto; /* 64 4 */
bool setup; /* 68 1 */
/* XXX 3 bytes hole, try to pack */
struct dsa_platform_data * pd; /* 72 8 */
struct list_head rtable; /* 80 16 */
unsigned int lags_len; /* 96 4 */
unsigned int last_switch; /* 100 4 */
/* size: 104, cachelines: 2, members: 13 */
/* sum members: 101, holes: 1, sum holes: 3 */
/* last cacheline: 40 bytes */
};
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Wed, 5 Jan 2022 13:21:40 +0000 (15:21 +0200)]
net: dsa: move dsa_switch_tree :: ports and lags to first cache line
dst->ports is accessed most notably by dsa_master_find_slave(), which is
invoked in the RX path.
dst->lags is accessed by dsa_lag_dev(), which is invoked in the RX path
of tag_dsa.c.
dst->tag_ops, dst->default_proto and dst->pd don't need to be in the
first cache line, so they are moved out by this change.
Before:
pahole -C dsa_switch_tree net/dsa/slave.o
struct dsa_switch_tree {
struct list_head list; /* 0 16 */
struct raw_notifier_head nh; /* 16 8 */
unsigned int index; /* 24 4 */
struct kref refcount; /* 28 4 */
bool setup; /* 32 1 */
/* XXX 7 bytes hole, try to pack */
const struct dsa_device_ops * tag_ops; /* 40 8 */
enum dsa_tag_protocol default_proto; /* 48 4 */
/* XXX 4 bytes hole, try to pack */
struct dsa_platform_data * pd; /* 56 8 */
/* --- cacheline 1 boundary (64 bytes) --- */
struct list_head ports; /* 64 16 */
struct list_head rtable; /* 80 16 */
struct net_device * * lags; /* 96 8 */
unsigned int lags_len; /* 104 4 */
unsigned int last_switch; /* 108 4 */
/* size: 112, cachelines: 2, members: 13 */
/* sum members: 101, holes: 2, sum holes: 11 */
/* last cacheline: 48 bytes */
};
After:
pahole -C dsa_switch_tree net/dsa/slave.o
struct dsa_switch_tree {
struct list_head list; /* 0 16 */
struct list_head ports; /* 16 16 */
struct raw_notifier_head nh; /* 32 8 */
unsigned int index; /* 40 4 */
struct kref refcount; /* 44 4 */
struct net_device * * lags; /* 48 8 */
bool setup; /* 56 1 */
/* XXX 7 bytes hole, try to pack */
/* --- cacheline 1 boundary (64 bytes) --- */
const struct dsa_device_ops * tag_ops; /* 64 8 */
enum dsa_tag_protocol default_proto; /* 72 4 */
/* XXX 4 bytes hole, try to pack */
struct dsa_platform_data * pd; /* 80 8 */
struct list_head rtable; /* 88 16 */
unsigned int lags_len; /* 104 4 */
unsigned int last_switch; /* 108 4 */
/* size: 112, cachelines: 2, members: 13 */
/* sum members: 101, holes: 2, sum holes: 11 */
/* last cacheline: 48 bytes */
};
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Wed, 5 Jan 2022 13:21:39 +0000 (15:21 +0200)]
net: dsa: make dsa_switch :: num_ports an unsigned int
Currently, num_ports is declared as size_t, which is defined as
__kernel_ulong_t, therefore it occupies 8 bytes of memory.
Even switches with port numbers in the range of tens are exotic, so
there is no need for this amount of storage.
Additionally, because the max_num_bridges member right above it is also
4 bytes, it means the compiler needs to add padding between the last 2
fields. By reducing the size, we don't need that padding and can reduce
the struct size.
Before:
pahole -C dsa_switch net/dsa/slave.o
struct dsa_switch {
struct device * dev; /* 0 8 */
struct dsa_switch_tree * dst; /* 8 8 */
unsigned int index; /* 16 4 */
u32 setup:1; /* 20: 0 4 */
u32 vlan_filtering_is_global:1; /* 20: 1 4 */
u32 needs_standalone_vlan_filtering:1; /* 20: 2 4 */
u32 configure_vlan_while_not_filtering:1; /* 20: 3 4 */
u32 untag_bridge_pvid:1; /* 20: 4 4 */
u32 assisted_learning_on_cpu_port:1; /* 20: 5 4 */
u32 vlan_filtering:1; /* 20: 6 4 */
u32 pcs_poll:1; /* 20: 7 4 */
u32 mtu_enforcement_ingress:1; /* 20: 8 4 */
/* XXX 23 bits hole, try to pack */
struct notifier_block nb; /* 24 24 */
/* XXX last struct has 4 bytes of padding */
void * priv; /* 48 8 */
void * tagger_data; /* 56 8 */
/* --- cacheline 1 boundary (64 bytes) --- */
struct dsa_chip_data * cd; /* 64 8 */
const struct dsa_switch_ops * ops; /* 72 8 */
u32 phys_mii_mask; /* 80 4 */
/* XXX 4 bytes hole, try to pack */
struct mii_bus * slave_mii_bus; /* 88 8 */
unsigned int ageing_time_min; /* 96 4 */
unsigned int ageing_time_max; /* 100 4 */
struct dsa_8021q_context * tag_8021q_ctx; /* 104 8 */
struct devlink * devlink; /* 112 8 */
unsigned int num_tx_queues; /* 120 4 */
unsigned int num_lag_ids; /* 124 4 */
/* --- cacheline 2 boundary (128 bytes) --- */
unsigned int max_num_bridges; /* 128 4 */
/* XXX 4 bytes hole, try to pack */
size_t num_ports; /* 136 8 */
/* size: 144, cachelines: 3, members: 27 */
/* sum members: 132, holes: 2, sum holes: 8 */
/* sum bitfield members: 9 bits, bit holes: 1, sum bit holes: 23 bits */
/* paddings: 1, sum paddings: 4 */
/* last cacheline: 16 bytes */
};
After:
pahole -C dsa_switch net/dsa/slave.o
struct dsa_switch {
struct device * dev; /* 0 8 */
struct dsa_switch_tree * dst; /* 8 8 */
unsigned int index; /* 16 4 */
u32 setup:1; /* 20: 0 4 */
u32 vlan_filtering_is_global:1; /* 20: 1 4 */
u32 needs_standalone_vlan_filtering:1; /* 20: 2 4 */
u32 configure_vlan_while_not_filtering:1; /* 20: 3 4 */
u32 untag_bridge_pvid:1; /* 20: 4 4 */
u32 assisted_learning_on_cpu_port:1; /* 20: 5 4 */
u32 vlan_filtering:1; /* 20: 6 4 */
u32 pcs_poll:1; /* 20: 7 4 */
u32 mtu_enforcement_ingress:1; /* 20: 8 4 */
/* XXX 23 bits hole, try to pack */
struct notifier_block nb; /* 24 24 */
/* XXX last struct has 4 bytes of padding */
void * priv; /* 48 8 */
void * tagger_data; /* 56 8 */
/* --- cacheline 1 boundary (64 bytes) --- */
struct dsa_chip_data * cd; /* 64 8 */
const struct dsa_switch_ops * ops; /* 72 8 */
u32 phys_mii_mask; /* 80 4 */
/* XXX 4 bytes hole, try to pack */
struct mii_bus * slave_mii_bus; /* 88 8 */
unsigned int ageing_time_min; /* 96 4 */
unsigned int ageing_time_max; /* 100 4 */
struct dsa_8021q_context * tag_8021q_ctx; /* 104 8 */
struct devlink * devlink; /* 112 8 */
unsigned int num_tx_queues; /* 120 4 */
unsigned int num_lag_ids; /* 124 4 */
/* --- cacheline 2 boundary (128 bytes) --- */
unsigned int max_num_bridges; /* 128 4 */
unsigned int num_ports; /* 132 4 */
/* size: 136, cachelines: 3, members: 27 */
/* sum members: 128, holes: 1, sum holes: 4 */
/* sum bitfield members: 9 bits, bit holes: 1, sum bit holes: 23 bits */
/* paddings: 1, sum paddings: 4 */
/* last cacheline: 8 bytes */
};
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Wed, 5 Jan 2022 13:21:38 +0000 (15:21 +0200)]
net: dsa: merge all bools of struct dsa_switch into a single u32
struct dsa_switch has 9 boolean properties, many of which are in fact
set by drivers for custom behavior (vlan_filtering_is_global,
needs_standalone_vlan_filtering, etc etc). The binary layout of the
structure could be improved. For example, the "bool setup" at the
beginning introduces a gratuitous 7 byte hole in the first cache line.
The change merges all boolean properties into bitfields of an u32, and
places that u32 in the first cache line of the structure, since many
bools are accessed from the data path (untag_bridge_pvid, vlan_filtering,
vlan_filtering_is_global).
We place this u32 after the existing ds->index, which is also 4 bytes in
size. As a positive side effect, ds->tagger_data now fits into the first
cache line too, because 4 bytes are saved.
Before:
pahole -C dsa_switch net/dsa/slave.o
struct dsa_switch {
bool setup; /* 0 1 */
/* XXX 7 bytes hole, try to pack */
struct device * dev; /* 8 8 */
struct dsa_switch_tree * dst; /* 16 8 */
unsigned int index; /* 24 4 */
/* XXX 4 bytes hole, try to pack */
struct notifier_block nb; /* 32 24 */
/* XXX last struct has 4 bytes of padding */
void * priv; /* 56 8 */
/* --- cacheline 1 boundary (64 bytes) --- */
void * tagger_data; /* 64 8 */
struct dsa_chip_data * cd; /* 72 8 */
const struct dsa_switch_ops * ops; /* 80 8 */
u32 phys_mii_mask; /* 88 4 */
/* XXX 4 bytes hole, try to pack */
struct mii_bus * slave_mii_bus; /* 96 8 */
unsigned int ageing_time_min; /* 104 4 */
unsigned int ageing_time_max; /* 108 4 */
struct dsa_8021q_context * tag_8021q_ctx; /* 112 8 */
struct devlink * devlink; /* 120 8 */
/* --- cacheline 2 boundary (128 bytes) --- */
unsigned int num_tx_queues; /* 128 4 */
bool vlan_filtering_is_global; /* 132 1 */
bool needs_standalone_vlan_filtering; /* 133 1 */
bool configure_vlan_while_not_filtering; /* 134 1 */
bool untag_bridge_pvid; /* 135 1 */
bool assisted_learning_on_cpu_port; /* 136 1 */
bool vlan_filtering; /* 137 1 */
bool pcs_poll; /* 138 1 */
bool mtu_enforcement_ingress; /* 139 1 */
unsigned int num_lag_ids; /* 140 4 */
unsigned int max_num_bridges; /* 144 4 */
/* XXX 4 bytes hole, try to pack */
size_t num_ports; /* 152 8 */
/* size: 160, cachelines: 3, members: 27 */
/* sum members: 141, holes: 4, sum holes: 19 */
/* paddings: 1, sum paddings: 4 */
/* last cacheline: 32 bytes */
};
After:
pahole -C dsa_switch net/dsa/slave.o
struct dsa_switch {
struct device * dev; /* 0 8 */
struct dsa_switch_tree * dst; /* 8 8 */
unsigned int index; /* 16 4 */
u32 setup:1; /* 20: 0 4 */
u32 vlan_filtering_is_global:1; /* 20: 1 4 */
u32 needs_standalone_vlan_filtering:1; /* 20: 2 4 */
u32 configure_vlan_while_not_filtering:1; /* 20: 3 4 */
u32 untag_bridge_pvid:1; /* 20: 4 4 */
u32 assisted_learning_on_cpu_port:1; /* 20: 5 4 */
u32 vlan_filtering:1; /* 20: 6 4 */
u32 pcs_poll:1; /* 20: 7 4 */
u32 mtu_enforcement_ingress:1; /* 20: 8 4 */
/* XXX 23 bits hole, try to pack */
struct notifier_block nb; /* 24 24 */
/* XXX last struct has 4 bytes of padding */
void * priv; /* 48 8 */
void * tagger_data; /* 56 8 */
/* --- cacheline 1 boundary (64 bytes) --- */
struct dsa_chip_data * cd; /* 64 8 */
const struct dsa_switch_ops * ops; /* 72 8 */
u32 phys_mii_mask; /* 80 4 */
/* XXX 4 bytes hole, try to pack */
struct mii_bus * slave_mii_bus; /* 88 8 */
unsigned int ageing_time_min; /* 96 4 */
unsigned int ageing_time_max; /* 100 4 */
struct dsa_8021q_context * tag_8021q_ctx; /* 104 8 */
struct devlink * devlink; /* 112 8 */
unsigned int num_tx_queues; /* 120 4 */
unsigned int num_lag_ids; /* 124 4 */
/* --- cacheline 2 boundary (128 bytes) --- */
unsigned int max_num_bridges; /* 128 4 */
/* XXX 4 bytes hole, try to pack */
size_t num_ports; /* 136 8 */
/* size: 144, cachelines: 3, members: 27 */
/* sum members: 132, holes: 2, sum holes: 8 */
/* sum bitfield members: 9 bits, bit holes: 1, sum bit holes: 23 bits */
/* paddings: 1, sum paddings: 4 */
/* last cacheline: 16 bytes */
};
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Wed, 5 Jan 2022 13:21:37 +0000 (15:21 +0200)]
net: dsa: move dsa_port :: type near dsa_port :: index
Both dsa_port :: type and dsa_port :: index introduce a 4 octet hole
after them, so we can group them together and the holes would be
eliminated, turning 16 octets of storage into just 8. This makes the
cpu_dp pointer fit in the first cache line, which is good, because
dsa_slave_to_master(), called by dsa_enqueue_skb(), uses it.
Before:
pahole -C dsa_port net/dsa/slave.o
struct dsa_port {
union {
struct net_device * master; /* 0 8 */
struct net_device * slave; /* 0 8 */
}; /* 0 8 */
const struct dsa_device_ops * tag_ops; /* 8 8 */
struct dsa_switch_tree * dst; /* 16 8 */
struct sk_buff * (*rcv)(struct sk_buff *, struct net_device *); /* 24 8 */
enum {
DSA_PORT_TYPE_UNUSED = 0,
DSA_PORT_TYPE_CPU = 1,
DSA_PORT_TYPE_DSA = 2,
DSA_PORT_TYPE_USER = 3,
} type; /* 32 4 */
/* XXX 4 bytes hole, try to pack */
struct dsa_switch * ds; /* 40 8 */
unsigned int index; /* 48 4 */
/* XXX 4 bytes hole, try to pack */
const char * name; /* 56 8 */
/* --- cacheline 1 boundary (64 bytes) --- */
struct dsa_port * cpu_dp; /* 64 8 */
u8 mac[6]; /* 72 6 */
u8 stp_state; /* 78 1 */
u8 vlan_filtering:1; /* 79: 0 1 */
u8 learning:1; /* 79: 1 1 */
u8 lag_tx_enabled:1; /* 79: 2 1 */
u8 devlink_port_setup:1; /* 79: 3 1 */
u8 setup:1; /* 79: 4 1 */
/* XXX 3 bits hole, try to pack */
struct device_node * dn; /* 80 8 */
unsigned int ageing_time; /* 88 4 */
/* XXX 4 bytes hole, try to pack */
struct dsa_bridge * bridge; /* 96 8 */
struct devlink_port devlink_port; /* 104 288 */
/* --- cacheline 6 boundary (384 bytes) was 8 bytes ago --- */
struct phylink * pl; /* 392 8 */
struct phylink_config pl_config; /* 400 40 */
struct net_device * lag_dev; /* 440 8 */
/* --- cacheline 7 boundary (448 bytes) --- */
struct net_device * hsr_dev; /* 448 8 */
struct list_head list; /* 456 16 */
const struct ethtool_ops * orig_ethtool_ops; /* 472 8 */
const struct dsa_netdevice_ops * netdev_ops; /* 480 8 */
struct mutex addr_lists_lock; /* 488 32 */
/* --- cacheline 8 boundary (512 bytes) was 8 bytes ago --- */
struct list_head fdbs; /* 520 16 */
struct list_head mdbs; /* 536 16 */
/* size: 552, cachelines: 9, members: 30 */
/* sum members: 539, holes: 3, sum holes: 12 */
/* sum bitfield members: 5 bits, bit holes: 1, sum bit holes: 3 bits */
/* last cacheline: 40 bytes */
};
After:
pahole -C dsa_port net/dsa/slave.o
struct dsa_port {
union {
struct net_device * master; /* 0 8 */
struct net_device * slave; /* 0 8 */
}; /* 0 8 */
const struct dsa_device_ops * tag_ops; /* 8 8 */
struct dsa_switch_tree * dst; /* 16 8 */
struct sk_buff * (*rcv)(struct sk_buff *, struct net_device *); /* 24 8 */
struct dsa_switch * ds; /* 32 8 */
unsigned int index; /* 40 4 */
enum {
DSA_PORT_TYPE_UNUSED = 0,
DSA_PORT_TYPE_CPU = 1,
DSA_PORT_TYPE_DSA = 2,
DSA_PORT_TYPE_USER = 3,
} type; /* 44 4 */
const char * name; /* 48 8 */
struct dsa_port * cpu_dp; /* 56 8 */
/* --- cacheline 1 boundary (64 bytes) --- */
u8 mac[6]; /* 64 6 */
u8 stp_state; /* 70 1 */
u8 vlan_filtering:1; /* 71: 0 1 */
u8 learning:1; /* 71: 1 1 */
u8 lag_tx_enabled:1; /* 71: 2 1 */
u8 devlink_port_setup:1; /* 71: 3 1 */
u8 setup:1; /* 71: 4 1 */
/* XXX 3 bits hole, try to pack */
struct device_node * dn; /* 72 8 */
unsigned int ageing_time; /* 80 4 */
/* XXX 4 bytes hole, try to pack */
struct dsa_bridge * bridge; /* 88 8 */
struct devlink_port devlink_port; /* 96 288 */
/* --- cacheline 6 boundary (384 bytes) --- */
struct phylink * pl; /* 384 8 */
struct phylink_config pl_config; /* 392 40 */
struct net_device * lag_dev; /* 432 8 */
struct net_device * hsr_dev; /* 440 8 */
/* --- cacheline 7 boundary (448 bytes) --- */
struct list_head list; /* 448 16 */
const struct ethtool_ops * orig_ethtool_ops; /* 464 8 */
const struct dsa_netdevice_ops * netdev_ops; /* 472 8 */
struct mutex addr_lists_lock; /* 480 32 */
/* --- cacheline 8 boundary (512 bytes) --- */
struct list_head fdbs; /* 512 16 */
struct list_head mdbs; /* 528 16 */
/* size: 544, cachelines: 9, members: 30 */
/* sum members: 539, holes: 1, sum holes: 4 */
/* sum bitfield members: 5 bits, bit holes: 1, sum bit holes: 3 bits */
/* last cacheline: 32 bytes */
};
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Wed, 5 Jan 2022 13:21:36 +0000 (15:21 +0200)]
net: dsa: merge all bools of struct dsa_port into a single u8
struct dsa_port has 5 bool members which create quite a number of 7 byte
holes in the structure layout. By merging them all into bitfields of an
u8, and placing that u8 in the 1-byte hole after dp->mac and dp->stp_state,
we can reduce the structure size from 576 bytes to 552 bytes on arm64.
Before:
pahole -C dsa_port net/dsa/slave.o
struct dsa_port {
union {
struct net_device * master; /* 0 8 */
struct net_device * slave; /* 0 8 */
}; /* 0 8 */
const struct dsa_device_ops * tag_ops; /* 8 8 */
struct dsa_switch_tree * dst; /* 16 8 */
struct sk_buff * (*rcv)(struct sk_buff *, struct net_device *); /* 24 8 */
enum {
DSA_PORT_TYPE_UNUSED = 0,
DSA_PORT_TYPE_CPU = 1,
DSA_PORT_TYPE_DSA = 2,
DSA_PORT_TYPE_USER = 3,
} type; /* 32 4 */
/* XXX 4 bytes hole, try to pack */
struct dsa_switch * ds; /* 40 8 */
unsigned int index; /* 48 4 */
/* XXX 4 bytes hole, try to pack */
const char * name; /* 56 8 */
/* --- cacheline 1 boundary (64 bytes) --- */
struct dsa_port * cpu_dp; /* 64 8 */
u8 mac[6]; /* 72 6 */
u8 stp_state; /* 78 1 */
/* XXX 1 byte hole, try to pack */
struct device_node * dn; /* 80 8 */
unsigned int ageing_time; /* 88 4 */
bool vlan_filtering; /* 92 1 */
bool learning; /* 93 1 */
/* XXX 2 bytes hole, try to pack */
struct dsa_bridge * bridge; /* 96 8 */
struct devlink_port devlink_port; /* 104 288 */
/* --- cacheline 6 boundary (384 bytes) was 8 bytes ago --- */
bool devlink_port_setup; /* 392 1 */
/* XXX 7 bytes hole, try to pack */
struct phylink * pl; /* 400 8 */
struct phylink_config pl_config; /* 408 40 */
/* --- cacheline 7 boundary (448 bytes) --- */
struct net_device * lag_dev; /* 448 8 */
bool lag_tx_enabled; /* 456 1 */
/* XXX 7 bytes hole, try to pack */
struct net_device * hsr_dev; /* 464 8 */
struct list_head list; /* 472 16 */
const struct ethtool_ops * orig_ethtool_ops; /* 488 8 */
const struct dsa_netdevice_ops * netdev_ops; /* 496 8 */
struct mutex addr_lists_lock; /* 504 32 */
/* --- cacheline 8 boundary (512 bytes) was 24 bytes ago --- */
struct list_head fdbs; /* 536 16 */
struct list_head mdbs; /* 552 16 */
bool setup; /* 568 1 */
/* size: 576, cachelines: 9, members: 30 */
/* sum members: 544, holes: 6, sum holes: 25 */
/* padding: 7 */
};
After:
pahole -C dsa_port net/dsa/slave.o
struct dsa_port {
union {
struct net_device * master; /* 0 8 */
struct net_device * slave; /* 0 8 */
}; /* 0 8 */
const struct dsa_device_ops * tag_ops; /* 8 8 */
struct dsa_switch_tree * dst; /* 16 8 */
struct sk_buff * (*rcv)(struct sk_buff *, struct net_device *); /* 24 8 */
enum {
DSA_PORT_TYPE_UNUSED = 0,
DSA_PORT_TYPE_CPU = 1,
DSA_PORT_TYPE_DSA = 2,
DSA_PORT_TYPE_USER = 3,
} type; /* 32 4 */
/* XXX 4 bytes hole, try to pack */
struct dsa_switch * ds; /* 40 8 */
unsigned int index; /* 48 4 */
/* XXX 4 bytes hole, try to pack */
const char * name; /* 56 8 */
/* --- cacheline 1 boundary (64 bytes) --- */
struct dsa_port * cpu_dp; /* 64 8 */
u8 mac[6]; /* 72 6 */
u8 stp_state; /* 78 1 */
u8 vlan_filtering:1; /* 79: 0 1 */
u8 learning:1; /* 79: 1 1 */
u8 lag_tx_enabled:1; /* 79: 2 1 */
u8 devlink_port_setup:1; /* 79: 3 1 */
u8 setup:1; /* 79: 4 1 */
/* XXX 3 bits hole, try to pack */
struct device_node * dn; /* 80 8 */
unsigned int ageing_time; /* 88 4 */
/* XXX 4 bytes hole, try to pack */
struct dsa_bridge * bridge; /* 96 8 */
struct devlink_port devlink_port; /* 104 288 */
/* --- cacheline 6 boundary (384 bytes) was 8 bytes ago --- */
struct phylink * pl; /* 392 8 */
struct phylink_config pl_config; /* 400 40 */
struct net_device * lag_dev; /* 440 8 */
/* --- cacheline 7 boundary (448 bytes) --- */
struct net_device * hsr_dev; /* 448 8 */
struct list_head list; /* 456 16 */
const struct ethtool_ops * orig_ethtool_ops; /* 472 8 */
const struct dsa_netdevice_ops * netdev_ops; /* 480 8 */
struct mutex addr_lists_lock; /* 488 32 */
/* --- cacheline 8 boundary (512 bytes) was 8 bytes ago --- */
struct list_head fdbs; /* 520 16 */
struct list_head mdbs; /* 536 16 */
/* size: 552, cachelines: 9, members: 30 */
/* sum members: 539, holes: 3, sum holes: 12 */
/* sum bitfield members: 5 bits, bit holes: 1, sum bit holes: 3 bits */
/* last cacheline: 40 bytes */
};
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Wed, 5 Jan 2022 13:21:35 +0000 (15:21 +0200)]
net: dsa: move dsa_port :: stp_state near dsa_port :: mac
The MAC address of a port is 6 octets in size, and this creates a 2
octet hole after it. There are some other u8 members of struct dsa_port
that we can put in that hole. One such member is the stp_state.
Before:
pahole -C dsa_port net/dsa/slave.o
struct dsa_port {
union {
struct net_device * master; /* 0 8 */
struct net_device * slave; /* 0 8 */
}; /* 0 8 */
const struct dsa_device_ops * tag_ops; /* 8 8 */
struct dsa_switch_tree * dst; /* 16 8 */
struct sk_buff * (*rcv)(struct sk_buff *, struct net_device *); /* 24 8 */
enum {
DSA_PORT_TYPE_UNUSED = 0,
DSA_PORT_TYPE_CPU = 1,
DSA_PORT_TYPE_DSA = 2,
DSA_PORT_TYPE_USER = 3,
} type; /* 32 4 */
/* XXX 4 bytes hole, try to pack */
struct dsa_switch * ds; /* 40 8 */
unsigned int index; /* 48 4 */
/* XXX 4 bytes hole, try to pack */
const char * name; /* 56 8 */
/* --- cacheline 1 boundary (64 bytes) --- */
struct dsa_port * cpu_dp; /* 64 8 */
u8 mac[6]; /* 72 6 */
/* XXX 2 bytes hole, try to pack */
struct device_node * dn; /* 80 8 */
unsigned int ageing_time; /* 88 4 */
bool vlan_filtering; /* 92 1 */
bool learning; /* 93 1 */
u8 stp_state; /* 94 1 */
/* XXX 1 byte hole, try to pack */
struct dsa_bridge * bridge; /* 96 8 */
struct devlink_port devlink_port; /* 104 288 */
/* --- cacheline 6 boundary (384 bytes) was 8 bytes ago --- */
bool devlink_port_setup; /* 392 1 */
/* XXX 7 bytes hole, try to pack */
struct phylink * pl; /* 400 8 */
struct phylink_config pl_config; /* 408 40 */
/* --- cacheline 7 boundary (448 bytes) --- */
struct net_device * lag_dev; /* 448 8 */
bool lag_tx_enabled; /* 456 1 */
/* XXX 7 bytes hole, try to pack */
struct net_device * hsr_dev; /* 464 8 */
struct list_head list; /* 472 16 */
const struct ethtool_ops * orig_ethtool_ops; /* 488 8 */
const struct dsa_netdevice_ops * netdev_ops; /* 496 8 */
struct mutex addr_lists_lock; /* 504 32 */
/* --- cacheline 8 boundary (512 bytes) was 24 bytes ago --- */
struct list_head fdbs; /* 536 16 */
struct list_head mdbs; /* 552 16 */
bool setup; /* 568 1 */
/* size: 576, cachelines: 9, members: 30 */
/* sum members: 544, holes: 6, sum holes: 25 */
/* padding: 7 */
};
After:
pahole -C dsa_port net/dsa/slave.o
struct dsa_port {
union {
struct net_device * master; /* 0 8 */
struct net_device * slave; /* 0 8 */
}; /* 0 8 */
const struct dsa_device_ops * tag_ops; /* 8 8 */
struct dsa_switch_tree * dst; /* 16 8 */
struct sk_buff * (*rcv)(struct sk_buff *, struct net_device *); /* 24 8 */
enum {
DSA_PORT_TYPE_UNUSED = 0,
DSA_PORT_TYPE_CPU = 1,
DSA_PORT_TYPE_DSA = 2,
DSA_PORT_TYPE_USER = 3,
} type; /* 32 4 */
/* XXX 4 bytes hole, try to pack */
struct dsa_switch * ds; /* 40 8 */
unsigned int index; /* 48 4 */
/* XXX 4 bytes hole, try to pack */
const char * name; /* 56 8 */
/* --- cacheline 1 boundary (64 bytes) --- */
struct dsa_port * cpu_dp; /* 64 8 */
u8 mac[6]; /* 72 6 */
u8 stp_state; /* 78 1 */
/* XXX 1 byte hole, try to pack */
struct device_node * dn; /* 80 8 */
unsigned int ageing_time; /* 88 4 */
bool vlan_filtering; /* 92 1 */
bool learning; /* 93 1 */
/* XXX 2 bytes hole, try to pack */
struct dsa_bridge * bridge; /* 96 8 */
struct devlink_port devlink_port; /* 104 288 */
/* --- cacheline 6 boundary (384 bytes) was 8 bytes ago --- */
bool devlink_port_setup; /* 392 1 */
/* XXX 7 bytes hole, try to pack */
struct phylink * pl; /* 400 8 */
struct phylink_config pl_config; /* 408 40 */
/* --- cacheline 7 boundary (448 bytes) --- */
struct net_device * lag_dev; /* 448 8 */
bool lag_tx_enabled; /* 456 1 */
/* XXX 7 bytes hole, try to pack */
struct net_device * hsr_dev; /* 464 8 */
struct list_head list; /* 472 16 */
const struct ethtool_ops * orig_ethtool_ops; /* 488 8 */
const struct dsa_netdevice_ops * netdev_ops; /* 496 8 */
struct mutex addr_lists_lock; /* 504 32 */
/* --- cacheline 8 boundary (512 bytes) was 24 bytes ago --- */
struct list_head fdbs; /* 536 16 */
struct list_head mdbs; /* 552 16 */
bool setup; /* 568 1 */
/* size: 576, cachelines: 9, members: 30 */
/* sum members: 544, holes: 6, sum holes: 25 */
/* padding: 7 */
};
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 5 Jan 2022 14:36:37 +0000 (14:36 +0000)]
Merge branch 'hns3-stats-refactor'
Jie Wang says:
====================
net: hns3: refactor rss/tqp stats functions
Currently, hns3 PF and VF module have two sets of rss and tqp stats APIs
to provide get and set functions. Most of these APIs are the same. There is
no need to keep these two sets of same functions for double development and
bugfix work.
This series refactor the rss and tqp stats APIs in hns3 PF and VF by
implementing one set of common APIs for PF and VF reuse and deleting the
old APIs.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Jie Wang [Wed, 5 Jan 2022 14:20:15 +0000 (22:20 +0800)]
net: hns3: create new common cmd code for PF and VF modules
Currently PF and VF use two sets of command code for modules to interact
with firmware. These codes values are same espect the macro names. It is
redundent to keep two sets of command code for same functions between PF
and VF.
So this patch firstly creates a unified command code for PF and VF module.
We keep the macro name same with the PF command code name to avoid too many
meaningless modifications. Secondly the new common command codes are used
to replace the old ones in VF and deletes the old ones.
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jie Wang [Wed, 5 Jan 2022 14:20:14 +0000 (22:20 +0800)]
net: hns3: refactor VF tqp stats APIs with new common tqp stats APIs
This patch firstly uses new tqp struct(hclge_comm_tqp) and removes the
old VF tqp struct(hclgevf_tqp). All the tqp stats members used in VF module
are modified according to the new hclge_comm_tqp.
Secondly VF tqp stats APIs are refactored to use new common tqp stats APIs.
The old tqp stats APIs in VF are deleted.
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jie Wang [Wed, 5 Jan 2022 14:20:13 +0000 (22:20 +0800)]
net: hns3: refactor PF tqp stats APIs with new common tqp stats APIs
This patch firstly uses new tqp struct(hclge_comm_tqp) and deletes the
old PF tqp struct(hclge_tqp). All the tqp stats members used in PF module
are modified according to the new hclge_comm_tqp.
Secondly PF tqp stats APIs are refactored to use new common tqp stats APIs.
The old tqp stats APIs in PF are deleted.
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jie Wang [Wed, 5 Jan 2022 14:20:12 +0000 (22:20 +0800)]
net: hns3: create new set of common tqp stats APIs for PF and VF reuse
This patch creates new set of common tqp stats structures and APIs for PF
and VF tqp stats module. Subfunctions such as get tqp stats, update tqp
stats and reset tqp stats are inclued in this patch.
These new common tqp stats APIs will be used to replace the old PF and VF
tqp stats APIs in next patches.
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jie Wang [Wed, 5 Jan 2022 14:20:11 +0000 (22:20 +0800)]
net: hns3: refactor VF rss init APIs with new common rss init APIs
This patch uses common rss init APIs to replace the old APIs in VF rss
module and removes the old VF rss init APIs. Several related Subfunctions
and macros are also modified in this patch.
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jie Wang [Wed, 5 Jan 2022 14:20:10 +0000 (22:20 +0800)]
net: hns3: refactor PF rss init APIs with new common rss init APIs
This patch uses common rss init APIs to replace the old APIs in PF rss
module and deletes the old PF rss init APIs. Some related subfunctions and
macros are also modified in this patch.
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jie Wang [Wed, 5 Jan 2022 14:20:09 +0000 (22:20 +0800)]
net: hns3: create new set of common rss init APIs for PF and VF reuse
This patch creates new set of common rss init APIs for PF and VF rss
module. Subfunctions called by rss init process are also created include
rss tuple configuration and rss indirect table configuration.
These new common rss init APIs will be used to replace the old PF and VF
rss init APIs in next patches.
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jie Wang [Wed, 5 Jan 2022 14:20:08 +0000 (22:20 +0800)]
net: hns3: refactor VF rss set APIs with new common rss set APIs
This patch uses new common rss set APIs to replace the old APIs in VF rss
module and removes those old rss set APIs. The related macros in VF are
also modified.
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jie Wang [Wed, 5 Jan 2022 14:20:07 +0000 (22:20 +0800)]
net: hns3: refactor PF rss set APIs with new common rss set APIs
This patch uses new common rss set APIs to replace the old APIs in PF rss
module and deletes the old rss set APIs. The related macros are also
modified.
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jie Wang [Wed, 5 Jan 2022 14:20:06 +0000 (22:20 +0800)]
net: hns3: create new set of common rss set APIs for PF and VF module
Currently, hns3 PF and VF rss module have two sets of rss set APIs to
configure rss. There is no need to keep two sets of these same APIs.
So this patch creates new set of common rss set APIs for PF and VF reuse.
These new APIs will be used to unify old APIs in next patches.
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jie Wang [Wed, 5 Jan 2022 14:20:05 +0000 (22:20 +0800)]
net: hns3: refactor VF rss get APIs with new common rss get APIs
This patch firstly uses new rss parameter struct(hclge_comm_rss_cfg) as
child member of hclgevf_dev and deletes the original child rss parameter
member(hclgevf_rss_cfg). All the rss parameter members used in VF rss
module is modified according to the new hclge_comm_rss_cfg.
Secondly VF rss get APIs are refactored to use new common rss get APIs. The
old rss get APIs in VF are deleted.
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jie Wang [Wed, 5 Jan 2022 14:20:04 +0000 (22:20 +0800)]
net: hns3: refactor PF rss get APIs with new common rss get APIs
This patch firstly uses new rss parameter struct(hclge_comm_rss_cfg) as
child member of hclge_dev and deletes the original child rss parameter
members in vport. All the vport child rss parameter members used in PF rss
module is modified according to the new hclge_comm_rss_cfg.
Secondly PF rss get APIs are refactored to use new common rss get APIs. The
old rss get APIs in PF are deleted.
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jie Wang [Wed, 5 Jan 2022 14:20:03 +0000 (22:20 +0800)]
net: hns3: create new set of common rss get APIs for PF and VF rss module
The PF and VF rss get APIs are almost the same espect the suffixes of API
names. These same impementions bring double development and bugfix work.
So this patch creates new common rss get APIs for PF and VF rss module.
Subfunctions called by rss query process are also created(e.g. rss tuple
conversion APIs).
These new common rss get APIs will be used to replace PF and VF old rss
APIs in next patches.
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jie Wang [Wed, 5 Jan 2022 14:20:02 +0000 (22:20 +0800)]
net: hns3: refactor hclge_comm_send function in PF/VF drivers
Currently, there are two different sets of special command codes in PF and
VF cmdq modules, this is because VF driver only uses small part of all the
command codes. In other words, these not used command codes in VF are also
sepcial command codes theoretically.
So this patch unifes the special command codes and deletes the bool param
is_pf of hclge_comm_send. All the related functions are refactored
according to the new hclge_comm_send function prototype.
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jie Wang [Wed, 5 Jan 2022 14:20:01 +0000 (22:20 +0800)]
net: hns3: create new rss common structure hclge_comm_rss_cfg
Currently PF stores its rss parameters in vport structure. VF stores rss
configurations in hclgevf_rss_cfg structure. Actually hns3 rss parameters
are same beween PF and VF. The two set of rss parameters are redundent and
may add extra bugfix work.
So this patch creates new common rss parameter struct(hclge_comm_rss_cfg)
to unify PF and VF rss configurations.
These new structures will be used to unify rss configurations in PF and VF
rss APIs in next patches.
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 5 Jan 2022 11:25:14 +0000 (11:25 +0000)]
Merge branch 'lan966x-extend-switchdev-and-mdb-support'
Horatiu Vultur says:
====================
net: lan966x: Extend switchdev with mdb support
This patch series extends lan966x with mdb support by implementing
the switchdev callbacks: SWITCHDEV_OBJ_ID_PORT_MDB and
SWITCHDEV_OBJ_ID_HOST_MDB.
It adds support for both ipv4/ipv6 entries and l2 entries.
v2->v3:
- rename PGID_FIRST and PGID_LAST to PGID_GP_START and PGID_GP_END
- don't forget and relearn an entry for the CPU if there are more
references to the cpu.
v1->v2:
- rename lan966x_mac_learn_impl to __lan966x_mac_learn
- rename lan966x_mac_cpu_copy to lan966x_mac_ip_learn
- fix grammar and typos in comments and commit messages
- add reference counter for entries that copy frames to CPU
====================
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Horatiu Vultur [Tue, 4 Jan 2022 15:33:38 +0000 (16:33 +0100)]
net: lan966x: Extend switchdev with mdb support
Extend lan966x driver with mdb support by implementing the switchdev
calls: SWITCHDEV_OBJ_ID_PORT_MDB and SWITCHDEV_OBJ_ID_HOST_MDB.
It is allowed to add both ipv4/ipv6 entries and l2 entries. To add
ipv4/ipv6 entries is not required to use the PGID table while for l2
entries it is required. The PGID table is much smaller than MAC table
so only fewer l2 entries can be added.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Horatiu Vultur [Tue, 4 Jan 2022 15:33:37 +0000 (16:33 +0100)]
net: lan966x: Add PGID_GP_START and PGID_GP_END
The first entries in the PGID table are used by the front ports while
the last entries are used for different purposes like flooding mask,
copy to CPU, etc. So add these macros to define which entries can be
used for general purpose.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Horatiu Vultur [Tue, 4 Jan 2022 15:33:36 +0000 (16:33 +0100)]
net: lan966x: Add function lan966x_mac_ip_learn()
Extend mac functionality with the function lan966x_mac_ip_learn. This
function adds an entry in the MAC table for IP multicast addresses.
These entries can copy a frame to the CPU but also can forward on the
front ports.
This functionality is needed for mdb support. In case the CPU and some
of the front ports subscribe to an IP multicast address.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 5 Jan 2022 11:22:17 +0000 (11:22 +0000)]
Merge branch 'mtk_eth_soc-refactoring-and-clause45'
Daniel Golle says:
====================
net: ethernet: mtk_eth_soc: refactoring and Clause 45
Rework value and type of mdio read and write functions in mtk_eth_soc
and generally clean up and unify both functions.
Then add support to access Clause 45 phy registers, using newly
introduced helper inline functions added by a patch Russell King has
suggested in a reply to an earlier version of this series [1].
All three commits are tested on the Bananapi BPi-R64 board having
MediaTek MT7531BE DSA gigE switch using clause 22 MDIO and
Ubiquiti UniFi 6 LR access point having Aquantia AQR112C PHY using
clause 45 MDIO.
[1]: https://lore.kernel.org/netdev/Ycr5Cna76eg2B0An@shell.armlinux.org.uk/
v11: also address return value of mtk_mdio_busy_wait
v10: correct order of SoB lines in 2/3, change patch order in series
v9: improved formatting and Cc missing maintainer
v8: add patch from Russel King, switch to bitfield helper macros
v7: remove unneeded variables and order OR-ed call parameters
v6: further clean up functions and more cleanly separate patches
v5: fix wrong variable name in first patch covered by follow-up patch
v4: clean-up return values and types, split into two commits
v3: return -1 instead of 0xffff on error in _mtk_mdio_write
v2: use MII_DEVADDR_C45_SHIFT and MII_REGADDR_C45_MASK to extract
device id and register address. Unify read and write functions to
have identical types and parameter names where possible as we are
anyway already replacing both function bodies.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Golle [Tue, 4 Jan 2022 12:07:46 +0000 (12:07 +0000)]
net: ethernet: mtk_eth_soc: implement Clause 45 MDIO access
Implement read and write access to IEEE 802.3 Clause 45 Ethernet
phy registers while making use of new mdiobus_c45_regad and
mdiobus_c45_devad helpers.
Tested on the Ubiquiti UniFi 6 LR access point featuring
MediaTek MT7622BV WiSoC with Aquantia AQR112C.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Russell King (Oracle) [Tue, 4 Jan 2022 12:07:00 +0000 (12:07 +0000)]
net: mdio: add helpers to extract clause 45 regad and devad fields
Add a couple of helpers and definitions to extract the clause 45 regad
and devad fields from the regnum passed into MDIO drivers.
Tested-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Golle [Tue, 4 Jan 2022 12:06:22 +0000 (12:06 +0000)]
net: ethernet: mtk_eth_soc: fix return values and refactor MDIO ops
Instead of returning -1 (-EPERM) when MDIO bus is stuck busy
while writing or 0xffff if it happens while reading, return the
appropriate -ETIMEDOUT. Also fix return type to int instead of u32.
Refactor functions to use bitfield helpers instead of having various
masking and shifting constants in the code, which also results in the
register definitions in the header file being more obviously related
to what is stated in the MediaTek's Reference Manual.
Fixes:
656e705243fd0 ("net-next: mediatek: add support for MT7623 ethernet")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 5 Jan 2022 11:15:16 +0000 (11:15 +0000)]
Merge branch '40GbE' of git://git./linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2022-01-04
This series contains updates to i40e and iavf drivers.
Mateusz adjusts displaying of failed VF MAC message when the failure is
expected as well as modifying an NVM info message to not confuse the user
for i40e.
Di Zhu fixes a use-after-free issue MAC filters for i40e.
Jedrzej fixes an issue with misreporting of Rx and Tx queues during
reinitialization for i40e.
Karen correct checking of channel queue configuration to occur against
active queues for iavf.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Vincent Mailhol [Mon, 13 Dec 2021 16:02:26 +0000 (01:02 +0900)]
can: netlink: report the CAN controller mode supported flags
Currently, the CAN netlink interface provides no easy ways to check
the capabilities of a given controller. The only method from the
command line is to try each CAN_CTRLMODE_* individually to check
whether the netlink interface returns an -EOPNOTSUPP error or not
(alternatively, one may find it easier to directly check the source
code of the driver instead...)
This patch introduces a method for the user to check both the
supported and the static capabilities. The proposed method introduces
a new IFLA nest: IFLA_CAN_CTRLMODE_EXT which extends the current
IFLA_CAN_CTRLMODE. This is done to guaranty a full forward and
backward compatibility between the kernel and the user land
applications.
The IFLA_CAN_CTRLMODE_EXT nest contains one single entry:
IFLA_CAN_CTRLMODE_SUPPORTED. Because this entry is only used in one
direction: kernel to userland, no new struct nla_policy are
introduced.
Below table explains how IFLA_CAN_CTRLMODE_SUPPORTED (hereafter:
"supported") and can_ctrlmode::flags (hereafter: "flags") allow us to
identify both the supported and the static capabilities, when masked
with any of the CAN_CTRLMODE_* bit flags:
supported & flags & Controller capabilities
CAN_CTRLMODE_* CAN_CTRLMODE_*
-----------------------------------------------------------------------
false false Feature not supported (always disabled)
false true Static feature (always enabled)
true false Feature supported but disabled
true true Feature supported and enabled
Link: https://lore.kernel.org/all/20211213160226.56219-5-mailhol.vincent@wanadoo.fr
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Vincent Mailhol [Mon, 13 Dec 2021 16:02:25 +0000 (01:02 +0900)]
can: dev: reorder struct can_priv members for better packing
Save eight bytes of holes on x86-64 architectures by reordering the
members of struct can_priv.
Before:
| $ pahole -C can_priv drivers/net/can/dev/dev.o
| struct can_priv {
| struct net_device * dev; /* 0 8 */
| struct can_device_stats can_stats; /* 8 24 */
| const struct can_bittiming_const * bittiming_const; /* 32 8 */
| const struct can_bittiming_const * data_bittiming_const; /* 40 8 */
| struct can_bittiming bittiming; /* 48 32 */
| /* --- cacheline 1 boundary (64 bytes) was 16 bytes ago --- */
| struct can_bittiming data_bittiming; /* 80 32 */
| const struct can_tdc_const * tdc_const; /* 112 8 */
| struct can_tdc tdc; /* 120 12 */
| /* --- cacheline 2 boundary (128 bytes) was 4 bytes ago --- */
| unsigned int bitrate_const_cnt; /* 132 4 */
| const u32 * bitrate_const; /* 136 8 */
| const u32 * data_bitrate_const; /* 144 8 */
| unsigned int data_bitrate_const_cnt; /* 152 4 */
| u32 bitrate_max; /* 156 4 */
| struct can_clock clock; /* 160 4 */
| unsigned int termination_const_cnt; /* 164 4 */
| const u16 * termination_const; /* 168 8 */
| u16 termination; /* 176 2 */
|
| /* XXX 6 bytes hole, try to pack */
|
| struct gpio_desc * termination_gpio; /* 184 8 */
| /* --- cacheline 3 boundary (192 bytes) --- */
| u16 termination_gpio_ohms[2]; /* 192 4 */
| enum can_state state; /* 196 4 */
| u32 ctrlmode; /* 200 4 */
| u32 ctrlmode_supported; /* 204 4 */
| int restart_ms; /* 208 4 */
|
| /* XXX 4 bytes hole, try to pack */
|
| struct delayed_work restart_work; /* 216 88 */
|
| /* XXX last struct has 4 bytes of padding */
|
| /* --- cacheline 4 boundary (256 bytes) was 48 bytes ago --- */
| int (*do_set_bittiming)(struct net_device *); /* 304 8 */
| int (*do_set_data_bittiming)(struct net_device *); /* 312 8 */
| /* --- cacheline 5 boundary (320 bytes) --- */
| int (*do_set_mode)(struct net_device *, enum can_mode); /* 320 8 */
| int (*do_set_termination)(struct net_device *, u16); /* 328 8 */
| int (*do_get_state)(const struct net_device *, enum can_state *); /* 336 8 */
| int (*do_get_berr_counter)(const struct net_device *, struct can_berr_counter *); /* 344 8 */
| unsigned int echo_skb_max; /* 352 4 */
|
| /* XXX 4 bytes hole, try to pack */
|
| struct sk_buff * * echo_skb; /* 360 8 */
|
| /* size: 368, cachelines: 6, members: 32 */
| /* sum members: 354, holes: 3, sum holes: 14 */
| /* paddings: 1, sum paddings: 4 */
| /* last cacheline: 48 bytes */
| };
After:
| $ pahole -C can_priv drivers/net/can/dev/dev.o
| struct can_priv {
| struct net_device * dev; /* 0 8 */
| struct can_device_stats can_stats; /* 8 24 */
| const struct can_bittiming_const * bittiming_const; /* 32 8 */
| const struct can_bittiming_const * data_bittiming_const; /* 40 8 */
| struct can_bittiming bittiming; /* 48 32 */
| /* --- cacheline 1 boundary (64 bytes) was 16 bytes ago --- */
| struct can_bittiming data_bittiming; /* 80 32 */
| const struct can_tdc_const * tdc_const; /* 112 8 */
| struct can_tdc tdc; /* 120 12 */
| /* --- cacheline 2 boundary (128 bytes) was 4 bytes ago --- */
| unsigned int bitrate_const_cnt; /* 132 4 */
| const u32 * bitrate_const; /* 136 8 */
| const u32 * data_bitrate_const; /* 144 8 */
| unsigned int data_bitrate_const_cnt; /* 152 4 */
| u32 bitrate_max; /* 156 4 */
| struct can_clock clock; /* 160 4 */
| unsigned int termination_const_cnt; /* 164 4 */
| const u16 * termination_const; /* 168 8 */
| u16 termination; /* 176 2 */
|
| /* XXX 6 bytes hole, try to pack */
|
| struct gpio_desc * termination_gpio; /* 184 8 */
| /* --- cacheline 3 boundary (192 bytes) --- */
| u16 termination_gpio_ohms[2]; /* 192 4 */
| unsigned int echo_skb_max; /* 196 4 */
| struct sk_buff * * echo_skb; /* 200 8 */
| enum can_state state; /* 208 4 */
| u32 ctrlmode; /* 212 4 */
| u32 ctrlmode_supported; /* 216 4 */
| int restart_ms; /* 220 4 */
| struct delayed_work restart_work; /* 224 88 */
|
| /* XXX last struct has 4 bytes of padding */
|
| /* --- cacheline 4 boundary (256 bytes) was 56 bytes ago --- */
| int (*do_set_bittiming)(struct net_device *); /* 312 8 */
| /* --- cacheline 5 boundary (320 bytes) --- */
| int (*do_set_data_bittiming)(struct net_device *); /* 320 8 */
| int (*do_set_mode)(struct net_device *, enum can_mode); /* 328 8 */
| int (*do_set_termination)(struct net_device *, u16); /* 336 8 */
| int (*do_get_state)(const struct net_device *, enum can_state *); /* 344 8 */
| int (*do_get_berr_counter)(const struct net_device *, struct can_berr_counter *); /* 352 8 */
|
| /* size: 360, cachelines: 6, members: 32 */
| /* sum members: 354, holes: 1, sum holes: 6 */
| /* paddings: 1, sum paddings: 4 */
| /* last cacheline: 40 bytes */
| };
Link: https://lore.kernel.org/all/20211213160226.56219-4-mailhol.vincent@wanadoo.fr
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Vincent Mailhol [Mon, 13 Dec 2021 16:02:24 +0000 (01:02 +0900)]
can: dev: add sanity check in can_set_static_ctrlmode()
Previous patch removed can_priv::ctrlmode_static to replace it with
can_get_static_ctrlmode().
A condition sine qua non for this to work is that the controller
static modes should never be set in can_priv::ctrlmode_supported
(c.f. the comment on can_priv::ctrlmode_supported which states that it
is for "options that can be *modified* by netlink"). Also, this
condition is already correctly fulfilled by all existing drivers
which rely on the ctrlmode_static feature.
Nonetheless, we added an extra safeguard in can_set_static_ctrlmode()
to return an error value and to warn the developer who would be
adventurous enough to set to static a given feature that is already
set to supported.
The drivers which rely on the static controller mode are then updated
to check the return value of can_set_static_ctrlmode().
Link: https://lore.kernel.org/all/20211213160226.56219-3-mailhol.vincent@wanadoo.fr
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Vincent Mailhol [Mon, 13 Dec 2021 16:02:23 +0000 (01:02 +0900)]
can: dev: replace can_priv::ctrlmode_static by can_get_static_ctrlmode()
The statically enabled features of a CAN controller can be retrieved
using below formula:
| u32 ctrlmode_static = priv->ctrlmode & ~priv->ctrlmode_supported;
As such, there is no need to store this information. This patch remove
the field ctrlmode_static of struct can_priv and provides, in
replacement, the inline function can_get_static_ctrlmode() which
returns the same value.
Link: https://lore.kernel.org/all/20211213160226.56219-2-mailhol.vincent@wanadoo.fr
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Vincent Mailhol [Tue, 7 Dec 2021 12:15:31 +0000 (21:15 +0900)]
can: do not increase tx_bytes statistics for RTR frames
The actual payload length of the CAN Remote Transmission Request (RTR)
frames is always 0, i.e. no payload is transmitted on the wire.
However, those RTR frames still use the DLC to indicate the length of
the requested frame.
As such, net_device_stats::tx_bytes should not be increased when
sending RTR frames.
The function can_get_echo_skb() already returns the correct length,
even for RTR frames (c.f. [1]). However, for historical reasons, the
drivers do not use can_get_echo_skb()'s return value and instead, most
of them store a temporary length (or dlc) in some local structure or
array. Using the return value of can_get_echo_skb() solves the
issue. After doing this, such length/dlc fields become unused and so
this patch does the adequate cleaning when needed.
This patch fixes all the CAN drivers.
Finally, can_get_echo_skb() is decorated with the __must_check
attribute in order to force future drivers to correctly use its return
value (else the compiler would emit a warning).
[1] commit
ed3320cec279 ("can: dev: __can_get_echo_skb():
fix real payload length return value for RTR frames")
Link: https://lore.kernel.org/all/20211207121531.42941-6-mailhol.vincent@wanadoo.fr
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Ludovic Desroches <ludovic.desroches@microchip.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: Jernej Skrabec <jernej.skrabec@gmail.com>
Cc: Yasushi SHOJI <yashi@spacecubics.com>
Cc: Oliver Hartkopp <socketcan@hartkopp.net>
Cc: Stephane Grosjean <s.grosjean@peak-system.com>
Cc: Andreas Larsson <andreas@gaisler.com>
Tested-by: Jimmy Assarsson <extja@kvaser.com> # kvaser
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Acked-by: Stefan Mätje <stefan.maetje@esd.eu> # esd_usb2
Tested-by: Stefan Mätje <stefan.maetje@esd.eu> # esd_usb2
[mkl: add conversion for grcan]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Vincent Mailhol [Tue, 7 Dec 2021 12:15:30 +0000 (21:15 +0900)]
can: do not increase rx_bytes statistics for RTR frames
The actual payload length of the CAN Remote Transmission Request (RTR)
frames is always 0, i.e. no payload is transmitted on the wire.
However, those RTR frames still use the DLC to indicate the length of
the requested frame.
As such, net_device_stats::rx_bytes should not be increased for the
RTR frames.
This patch fixes all the CAN drivers.
Link: https://lore.kernel.org/all/20211207121531.42941-5-mailhol.vincent@wanadoo.fr
Cc: Marc Kleine-Budde <mkl@pengutronix.de>
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Ludovic Desroches <ludovic.desroches@microchip.com>
Cc: Chandrasekar Ramakrishnan <rcsekar@samsung.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Chen-Yu Tsai <wens@csie.org>
Cc: Jernej Skrabec <jernej.skrabec@gmail.com>
Cc: Yasushi SHOJI <yashi@spacecubics.com>
Cc: Appana Durga Kedareswara rao <appana.durga.rao@xilinx.com>
Cc: Naga Sureshkumar Relli <naga.sureshkumar.relli@xilinx.com>
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: Stephane Grosjean <s.grosjean@peak-system.com>
Tested-by: Jimmy Assarsson <extja@kvaser.com> # kvaser
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Acked-by: Stefan Mätje <stefan.maetje@esd.eu> # esd_usb2
Tested-by: Stefan Mätje <stefan.maetje@esd.eu> # esd_usb2
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Vincent Mailhol [Tue, 7 Dec 2021 12:15:29 +0000 (21:15 +0900)]
can: do not copy the payload of RTR frames
The actual payload length of the CAN Remote Transmission Request (RTR)
frames is always 0, i.e. no payload is transmitted on the wire.
However, those RTR frames still use the DLC to indicate the length of
the requested frame.
For this reason, it is incorrect to copy the payload of RTR frames
(the payload buffer would only contain garbage data). This patch
encapsulates the payload copy in a check toward the RTR flag.
Link: https://lore.kernel.org/all/20211207121531.42941-4-mailhol.vincent@wanadoo.fr
Cc: Yasushi SHOJI <yashi@spacecubics.com>
Tested-by: Yasushi SHOJI <yashi@spacecubics.com>
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Vincent Mailhol [Tue, 7 Dec 2021 12:15:28 +0000 (21:15 +0900)]
can: kvaser_usb: do not increase tx statistics when sending error message frames
The CAN error message frames (i.e. error skb) are an interface
specific to socket CAN. The payload of the CAN error message frames
does not correspond to any actual data sent on the wire. Only an error
flag and a delimiter are transmitted when an error occurs (c.f. ISO
11898-1 section 10.4.4.2 "Error flag").
For this reason, it makes no sense to increment the tx_packets and
tx_bytes fields of struct net_device_stats when sending an error
message frame because no actual payload will be transmitted on the
wire.
N.B. Sending error message frames is a very specific feature which, at
the moment, is only supported by the Kvaser Hydra hardware. Please
refer to [1] for more details on the topic.
[1] https://lore.kernel.org/linux-can/CAMZ6RqK0rTNg3u3mBpZOoY51jLZ-et-J01tY6-+mWsM4meVw-A@mail.gmail.com/t/#u
Link: https://lore.kernel.org/all/20211207121531.42941-3-mailhol.vincent@wanadoo.fr
Co-developed-by: Jimmy Assarsson <extja@kvaser.com>
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Vincent Mailhol [Tue, 7 Dec 2021 12:15:27 +0000 (21:15 +0900)]
can: do not increase rx statistics when generating a CAN rx error message frame
The CAN error message frames (i.e. error skb) are an interface
specific to socket CAN. The payload of the CAN error message frames
does not correspond to any actual data sent on the wire. Only an error
flag and a delimiter are transmitted when an error occurs (c.f. ISO
11898-1 section 10.4.4.2 "Error flag").
For this reason, it makes no sense to increment the rx_packets and
rx_bytes fields of struct net_device_stats because no actual payload
were transmitted on the wire.
This patch fixes all the CAN drivers.
Link: https://lore.kernel.org/all/20211207121531.42941-2-mailhol.vincent@wanadoo.fr
CC: Marc Kleine-Budde <mkl@pengutronix.de>
CC: Nicolas Ferre <nicolas.ferre@microchip.com>
CC: Alexandre Belloni <alexandre.belloni@bootlin.com>
CC: Ludovic Desroches <ludovic.desroches@microchip.com>
CC: Chandrasekar Ramakrishnan <rcsekar@samsung.com>
CC: Maxime Ripard <mripard@kernel.org>
CC: Chen-Yu Tsai <wens@csie.org>
CC: Jernej Skrabec <jernej.skrabec@gmail.com>
CC: Appana Durga Kedareswara rao <appana.durga.rao@xilinx.com>
CC: Naga Sureshkumar Relli <naga.sureshkumar.relli@xilinx.com>
CC: Michal Simek <michal.simek@xilinx.com>
CC: Stephane Grosjean <s.grosjean@peak-system.com>
Tested-by: Jimmy Assarsson <extja@kvaser.com> # kvaser
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Acked-by: Stefan Mätje <stefan.maetje@esd.eu> # esd_usb2
Tested-by: Stefan Mätje <stefan.maetje@esd.eu> # esd_usb2
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Vincent Mailhol [Tue, 26 Oct 2021 18:05:53 +0000 (03:05 +0900)]
can: etas_es58x: es58x_init_netdev: populate net_device::dev_port
The field dev_port of struct net_device indicates the port number of a
network device [1]. This patch populates this field.
This field can be helpful to distinguish between the two network
interfaces of a dual channel device (i.e. ES581.4 or ES582.1). Indeed,
at the moment, all the network interfaces of a same device share the
same static udev attributes c.f. output of:
| udevadm info --attribute-walk /sys/class/net/canX
The dev_port attribute can then be used to write some udev rules to,
for example, assign a permanent name to each network interface based
on the serial/dev_port pair (which is convenient when you have a test
bench with several CAN devices connected simultaneously and wish to
keep consistent interface names upon reboot).
[1] https://www.kernel.org/doc/Documentation/ABI/testing/sysfs-class-net
Link: https://lore.kernel.org/all/20211026180553.1953189-1-mailhol.vincent@wanadoo.fr
Suggested-by: Lukas Magel <lukas.magel@escrypt.com>
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Lad Prabhakar [Tue, 21 Dec 2021 20:00:16 +0000 (20:00 +0000)]
can: sja1000: sp_probe(): use platform_get_irq() to get the interrupt
It is preferred that drivers use platform_get_irq() instead of
irq_of_parse_and_map(), so replace.
Link: https://lore.kernel.org/all/20211221200016.13459-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Lad Prabhakar [Tue, 21 Dec 2021 19:45:08 +0000 (19:45 +0000)]
can: ti_hecc: ti_hecc_probe(): use platform_get_irq() to get the interrupt
platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static
allocation of IRQ resources in DT core code, this causes an issue when
using hierarchical interrupt domains using "interrupts" property in
the node as this bypasses the hierarchical setup and messes up the irq
chaining.
In preparation for removal of static setup of IRQ resource from DT
core code use platform_get_irq().
Link: https://lore.kernel.org/all/20211221194508.11737-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Jimmy Assarsson [Wed, 8 Dec 2021 11:56:05 +0000 (12:56 +0100)]
can: kvaser_usb: make use of units.h in assignment of frequency
Use the MEGA define plus the comment /* Hz */ when assigning
frequencies.
Link: https://lore.kernel.org/all/20211210075803.343841-1-mkl@pengutronix.de
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Andy Shevchenko [Thu, 2 Dec 2021 20:58:55 +0000 (22:58 +0200)]
can: mcp251x: mcp251x_gpio_setup(): Get rid of duplicate of_node assignment
GPIO library does copy the of_node from the parent device of the GPIO
chip, there is no need to repeat this in the individual drivers.
Remove assignment here.
For the details one may look into the of_gpio_dev_init()
implementation.
Link: https://lore.kernel.org/all/20211202205855.76946-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Marc Kleine-Budde [Sun, 12 Dec 2021 14:56:01 +0000 (15:56 +0100)]
can: usb_8dev: remove unused member echo_skb from struct usb_8dev_priv
This patch removes the unused memberecho_skb from the struct
usb_8dev_priv.
Fixes:
0024d8ad1639 ("can: usb_8dev: Add support for USB2CAN interface from 8 devices")
Link: https://lore.kernel.org/all/20220104230753.956520-1-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
M Chetan Kumar [Tue, 4 Jan 2022 15:02:13 +0000 (20:32 +0530)]
Revert "net: wwan: iosm: Keep device at D0 for s2idle case"
Depending on BIOS configuration IOSM driver exchanges
protocol required for putting device into D3L2 or D3L1.2.
ipc_pcie_suspend_s2idle() is implemented to put device to D3L1.2.
This patch forces PCI core know this device should stay at D0.
- pci_save_state()is expensive since it does a lot of slow PCI
config reads.
The reported issue is not observed on x86 platform. The supurios
wake on AMD platform needs to be futher debugged with orignal patch
submitter [1]. Also the impact of adding pci_save_state() needs to be
assessed by testing it on other platforms.
This reverts commit
f4dd5174e273("net: wwan: iosm: Keep device
at D0 for s2idle case").
[1] https://lore.kernel.org/all/
20211224081914.345292-2-kai.heng.feng@canonical.com/
Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com>
Link: https://lore.kernel.org/r/20220104150213.1894-1-m.chetan.kumar@linux.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Martin Habets [Sun, 2 Jan 2022 08:41:22 +0000 (08:41 +0000)]
sfc: The RX page_ring is optional
The RX page_ring is an optional feature that improves
performance. When allocation fails the driver can still
function, but possibly with a lower bandwidth.
Guard against dereferencing a NULL page_ring.
Fixes:
2768935a4660 ("sfc: reuse pages to avoid DMA mapping/unmapping costs")
Signed-off-by: Martin Habets <habetsm.xilinx@gmail.com>
Reported-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Link: https://lore.kernel.org/r/164111288276.5798.10330502993729113868.stgit@palantir17.mph.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Karen Sornek [Wed, 1 Sep 2021 07:21:46 +0000 (09:21 +0200)]
iavf: Fix limit of total number of queues to active queues of VF
In the absence of this validation, if the user requests to
configure queues more than the enabled queues, it results in
sending the requested number of queues to the kernel stack
(due to the asynchronous nature of VF response), in which
case the stack might pick a queue to transmit that is not
enabled and result in Tx hang. Fix this bug by
limiting the total number of queues allocated for VF to
active queues of VF.
Fixes:
d5b33d024496 ("i40evf: add ndo_setup_tc callback to i40evf")
Signed-off-by: Ashwin Vijayavel <ashwin.vijayavel@intel.com>
Signed-off-by: Karen Sornek <karen.sornek@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Jedrzej Jagielski [Fri, 17 Dec 2021 14:29:05 +0000 (14:29 +0000)]
i40e: Fix incorrect netdev's real number of RX/TX queues
There was a wrong queues representation in sysfs during
driver's reinitialization in case of online cpus number is
less than combined queues. It was caused by stopped
NetworkManager, which is responsible for calling vsi_open
function during driver's initialization.
In specific situation (ex. 12 cpus online) there were 16 queues
in /sys/class/net/<iface>/queues. In case of modifying queues with
value higher, than number of online cpus, then it caused write
errors and other errors.
Add updating of sysfs's queues representation during driver
initialization.
Fixes:
41c445ff0f48 ("i40e: main driver core")
Signed-off-by: Lukasz Cieplicki <lukaszx.cieplicki@intel.com>
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Mateusz Palczewski [Thu, 9 Dec 2021 10:04:35 +0000 (11:04 +0100)]
i40e: Fix for displaying message regarding NVM version
When loading the i40e driver, it prints a message like: 'The driver for the
device detected a newer version of the NVM image v1.x than expected v1.y.
Please install the most recent version of the network driver.' This is
misleading as the driver is working as expected.
Fix that by removing the second part of message and changing it from
dev_info to dev_dbg.
Fixes:
4fb29bddb57f ("i40e: The driver now prints the API version in error message")
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Di Zhu [Mon, 29 Nov 2021 13:52:01 +0000 (19:52 +0600)]
i40e: fix use-after-free in i40e_sync_filters_subtask()
Using ifconfig command to delete the ipv6 address will cause
the i40e network card driver to delete its internal mac_filter and
i40e_service_task kernel thread will concurrently access the mac_filter.
These two processes are not protected by lock
so causing the following use-after-free problems.
print_address_description+0x70/0x360
? vprintk_func+0x5e/0xf0
kasan_report+0x1b2/0x330
i40e_sync_vsi_filters+0x4f0/0x1850 [i40e]
i40e_sync_filters_subtask+0xe3/0x130 [i40e]
i40e_service_task+0x195/0x24c0 [i40e]
process_one_work+0x3f5/0x7d0
worker_thread+0x61/0x6c0
? process_one_work+0x7d0/0x7d0
kthread+0x1c3/0x1f0
? kthread_park+0xc0/0xc0
ret_from_fork+0x35/0x40
Allocated by task 2279810:
kasan_kmalloc+0xa0/0xd0
kmem_cache_alloc_trace+0xf3/0x1e0
i40e_add_filter+0x127/0x2b0 [i40e]
i40e_add_mac_filter+0x156/0x190 [i40e]
i40e_addr_sync+0x2d/0x40 [i40e]
__hw_addr_sync_dev+0x154/0x210
i40e_set_rx_mode+0x6d/0xf0 [i40e]
__dev_set_rx_mode+0xfb/0x1f0
__dev_mc_add+0x6c/0x90
igmp6_group_added+0x214/0x230
__ipv6_dev_mc_inc+0x338/0x4f0
addrconf_join_solict.part.7+0xa2/0xd0
addrconf_dad_work+0x500/0x980
process_one_work+0x3f5/0x7d0
worker_thread+0x61/0x6c0
kthread+0x1c3/0x1f0
ret_from_fork+0x35/0x40
Freed by task 2547073:
__kasan_slab_free+0x130/0x180
kfree+0x90/0x1b0
__i40e_del_filter+0xa3/0xf0 [i40e]
i40e_del_mac_filter+0xf3/0x130 [i40e]
i40e_addr_unsync+0x85/0xa0 [i40e]
__hw_addr_sync_dev+0x9d/0x210
i40e_set_rx_mode+0x6d/0xf0 [i40e]
__dev_set_rx_mode+0xfb/0x1f0
__dev_mc_del+0x69/0x80
igmp6_group_dropped+0x279/0x510
__ipv6_dev_mc_dec+0x174/0x220
addrconf_leave_solict.part.8+0xa2/0xd0
__ipv6_ifa_notify+0x4cd/0x570
ipv6_ifa_notify+0x58/0x80
ipv6_del_addr+0x259/0x4a0
inet6_addr_del+0x188/0x260
addrconf_del_ifaddr+0xcc/0x130
inet6_ioctl+0x152/0x190
sock_do_ioctl+0xd8/0x2b0
sock_ioctl+0x2e5/0x4c0
do_vfs_ioctl+0x14e/0xa80
ksys_ioctl+0x7c/0xa0
__x64_sys_ioctl+0x42/0x50
do_syscall_64+0x98/0x2c0
entry_SYSCALL_64_after_hwframe+0x65/0xca
Fixes:
41c445ff0f48 ("i40e: main driver core")
Signed-off-by: Di Zhu <zhudi2@huawei.com>
Signed-off-by: Rui Zhang <zhangrui182@huawei.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Mateusz Palczewski [Wed, 3 Mar 2021 11:45:33 +0000 (11:45 +0000)]
i40e: Fix to not show opcode msg on unsuccessful VF MAC change
Hide i40e opcode information sent during response to VF in case when
untrusted VF tried to change MAC on the VF interface.
This is implemented by adding an additional parameter 'hide' to the
response sent to VF function that hides the display of error
information, but forwards the error code to VF.
Previously it was not possible to send response with some error code
to VF without displaying opcode information.
Fixes:
5c3c48ac6bf5 ("i40e: implement virtual device interface")
Signed-off-by: Grzegorz Szczurek <grzegorzx.szczurek@intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Reviewed-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Tony Brelinski <tony.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Pavel Skripkin [Tue, 4 Jan 2022 18:28:06 +0000 (21:28 +0300)]
ieee802154: atusb: fix uninit value in atusb_set_extended_addr
Alexander reported a use of uninitialized value in
atusb_set_extended_addr(), that is caused by reading 0 bytes via
usb_control_msg().
Fix it by validating if the number of bytes transferred is actually
correct, since usb_control_msg() may read less bytes, than was requested
by caller.
Fail log:
BUG: KASAN: uninit-cmp in ieee802154_is_valid_extended_unicast_addr include/linux/ieee802154.h:310 [inline]
BUG: KASAN: uninit-cmp in atusb_set_extended_addr drivers/net/ieee802154/atusb.c:1000 [inline]
BUG: KASAN: uninit-cmp in atusb_probe.cold+0x29f/0x14db drivers/net/ieee802154/atusb.c:1056
Uninit value used in comparison:
311daa649a2003bd stack handle:
000000009a2003bd
ieee802154_is_valid_extended_unicast_addr include/linux/ieee802154.h:310 [inline]
atusb_set_extended_addr drivers/net/ieee802154/atusb.c:1000 [inline]
atusb_probe.cold+0x29f/0x14db drivers/net/ieee802154/atusb.c:1056
usb_probe_interface+0x314/0x7f0 drivers/usb/core/driver.c:396
Fixes:
7490b008d123 ("ieee802154: add support for atusb transceiver")
Reported-by: Alexander Potapenko <glider@google.com>
Acked-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Link: https://lore.kernel.org/r/20220104182806.7188-1-paskripkin@gmail.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Jakub Kicinski [Tue, 4 Jan 2022 16:13:02 +0000 (08:13 -0800)]
Merge tag 'mac80211-next-for-net-next-2022-01-04' of git://git./linux/kernel/git/jberg/mac80211-next
Johannes Berg says:
====================
Just a few more changes:
- mac80211: allow non-standard VHT MCSes 10/11
- mac80211: add sleepable station iterator for drivers
- nl80211: clarify a comment
- mac80211: small cleanup to use typed element helpers
* tag 'mac80211-next-for-net-next-2022-01-04' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next:
mac80211: use ieee80211_bss_get_elem()
nl80211: clarify comment for mesh PLINK_BLOCKED state
mac80211: Add stations iterator where the iterator function may sleep
mac80211: allow non-standard VHT MCS-10/11
====================
Link: https://lore.kernel.org/r/20220104153403.69749-1-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Tue, 4 Jan 2022 15:18:27 +0000 (07:18 -0800)]
Merge tag 'mac80211-for-net-2022-01-04' of git://git./linux/kernel/git/jberg/mac80211
Johannes Berg says:
====================
Two more changes:
- mac80211: initialize a variable to avoid using it uninitialized
- mac80211 mesh: put some data structures into the container to
fix bugs with and not have to deal with allocation failures
* tag 'mac80211-for-net-2022-01-04' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211:
mac80211: mesh: embedd mesh_paths and mpp_paths into ieee80211_if_mesh
mac80211: initialize variable have_higher_than_11mbit
====================
Link: https://lore.kernel.org/r/20220104144449.64937-1-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
projects / platform / kernel / linux-rpi.git / log