arm64: dts: qcom: ipq9574: Use assigned-clock-rates for QUP I2C core clks

Use assigned-clock-rates property for configuring the QUP I2C core clocks
to operate at nominal frequency.

Signed-off-by: Devi Priya <quic_devipriy@quicinc.com>
Link: https://lore.kernel.org/r/20230615084841.12375-1-quic_devipriy@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: msm8939-samsung-a7: Add initial dts

This dts adds support for Samsung Galaxy A7 smartphone released in 2015.

Add a device tree for A7 with initial support for:

- GPIO keys
- Hall Sensor
- SDHCI (internal and external storage)
- USB Device Mode
- UART (on USB connector via the SM5502 MUIC)
- WCNSS (WiFi/BT)
- Regulators
- Touch key
- Accelerometer/Magnetometer
- Fuelgauge
- NFC
- Vibrator
- Touchscreen

Signed-off-by: Lin, Meng-Bo <linmengbo0689@protonmail.com>
Link: https://lore.kernel.org/r/20230623100237.5299-1-linmengbo0689@protonmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

dt-bindings: qcom: Document msm8939,a7

Document samsung,a7 bindings used in its device tree.

Signed-off-by: Lin, Meng-Bo <linmengbo0689@protonmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230623100220.5284-1-linmengbo0689@protonmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

dt-bindings: qcom: Allow SoC names ending in "pro"

There are a couple of SoCs whose names end in "pro", with the currently-
upstream examples being msm8974pro and msm8996pro. Allow such suffix in
SoC-specific compatibles.

Fixes: 5aa332c5e7ca ("dt-bindings: qcom: document preferred compatible naming")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230626-topic-bindingsfixups-v1-1-254ae8642e69@linaro.org
[bjorn: Changed (pro|) to (pro)?, per Rob's request]
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: msm8916-samsung-j5-common: Add touchscreen

J5 and J5X use an Imagis IST3038C touchscreen that is connected to
blsp_i2c5. Add it to the device tree.

MFD driver for SM5703 is unavailable at the moment, which is required
to power up the touchscreen on J5, so it's disabled on J5 for now.

Signed-off-by: Lin, Meng-Bo <linmengbo0689@protonmail.com>
Link: https://lore.kernel.org/r/20230715214046.14902-1-linmengbo0689@protonmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: msm8916-samsung-e2015: Add accelerometer

E5, E7 and Grand Max have ST LIS2HH12 accelerometer.
Add support for it.

Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Lin, Meng-Bo <linmengbo0689@protonmail.com>
Link: https://lore.kernel.org/r/20230716190807.7056-1-linmengbo0689@protonmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm8350: add APR and LPASS TLMM

Add audio-related nodes: the APR in the ADSP (same as on SM8250) and
LPASS TLMM pin controller.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230719192809.434709-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm8350-hdk: add uSD card

Add uSD card to HDK8350.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230719192809.434709-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm8350-hdk: include PMK8350

HDK8350 comes with PMK8350 PMIC, so include relevant DTSI.  This also
allows to use reboot reason.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230719192809.434709-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm8250: Add interconnect paths to UFSHC

UFS host controller requires interconnect path configuration for proper
working. So let's specify them for SM8250 SoC.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20230720054100.9940-14-manivannan.sadhasivam@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sdm845: Add interconnect paths to UFSHC

UFS host controller requires interconnect path configuration for proper
working. So let's specify them for SDM845 SoC.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20230720054100.9940-13-manivannan.sadhasivam@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sdm845: Fix the min frequency of "ice_core_clk"

Minimum frequency of the "ice_core_clk" should be 75MHz as specified in the
downstream vendor devicetree. So fix it!

https://git.codelinaro.org/clo/la/kernel/msm-4.9/-/blob/LA.UM.7.3.r1-09300-sdm845.0/arch/arm64/boot/dts/qcom/sdm845.dtsi

Fixes: 433f9a57298f ("arm64: dts: sdm845: add Inline Crypto Engine registers and clock")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20230720054100.9940-5-manivannan.sadhasivam@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sdm845: Add missing RPMh power domain to GCC

GCC and it's GDSCs are under the RPMh CX power domain. So let's add the
missing RPMh power domain to the GCC node.

Fixes: 6d4cf750d03a ("arm64: dts: sdm845: Add minimal dts/dtsi files for sdm845 SoC and MTP")
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Co-developed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20230720054100.9940-4-manivannan.sadhasivam@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm8550: Update the RPMHPD bindings entry

Update the RPMHPD bindings entry as per the new generic bindings defined
in rpmhpd.h for SM8550 SoC.

Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com>
Link: https://lore.kernel.org/r/1689840545-5094-5-git-send-email-quic_rohiagar@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm8450: Update the RPMHPD bindings entry

Update the RPMHPD bindings entry as per the new generic bindings defined
in rpmhpd.h for SM8450 SoC.

Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com>
Link: https://lore.kernel.org/r/1689840545-5094-4-git-send-email-quic_rohiagar@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm8350: Update the RPMHPD bindings entry

Update the RPMHPD bindings entry as per the new generic bindings defined in
rpmhpd.h for SM8350 SoC.

Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com>
Link: https://lore.kernel.org/r/1689840545-5094-3-git-send-email-quic_rohiagar@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm8250: Update the RPMHPD bindings entry

Update the RPMHPD bindings entry as per the new generic bindings defined in
rpmhpd.h for SM8250 SoC.

Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com>
Link: https://lore.kernel.org/r/1689840545-5094-2-git-send-email-quic_rohiagar@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

Merge branch '1689744162-9421-2-git-send-email-quic_rohiagar@quicinc.com' into arm64-for-6.6

Merge the new generic RPMHPD defines from a topic branch, to alow them
being used in DeviceTree source, and the driver.

dt-bindings: power: qcom,rpmhpd: Add Generic RPMh PD indexes

Add Generic RPMh Power Domain indexes that can be used
for all the Qualcomm SoC henceforth.
The power domain indexes of these bindings are based on compatibility
with current targets like SM8[2345]50 targets.

Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com>
Suggested-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/1689744162-9421-2-git-send-email-quic_rohiagar@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: qru1000-idp: Update reserved memory region

Add missing reserved regions as described in QRU1000 memory map.

Signed-off-by: Komal Bajaj <quic_kbajaj@quicinc.com>
Link: https://lore.kernel.org/r/20230706125129.20969-3-quic_kbajaj@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: qdu1000-idp: Update reserved memory region

Add missing reserved regions as described in QDU1000 memory map.

Signed-off-by: Komal Bajaj <quic_kbajaj@quicinc.com>
Link: https://lore.kernel.org/r/20230706125129.20969-2-quic_kbajaj@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm8250-pdx203: add required pin function

DT bindings expect function in each pin state in the pin configuration:

  sm8250-sony-xperia-edo-pdx203.dtb: pinctrl@f100000: cam-pwr-b-state: 'oneOf' conditional failed, one must be fixed:
    'function' is a required property

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230717210055.21979-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sc8180x-primus: remove superfluous "input-enable"

Pin configuration property "input-enable" was used with the intention to
disable the output, but this is done by default by Linux drivers.  Since
commit c4a48b0df8bf ("dt-bindings: pinctrl: qcom: tlmm should use
output-disable, not input-enable") the property is not accepted anymore:

  sc8180x-primus.dtb: pinctrl@3100000: hall-int-active-state: 'oneOf' conditional failed, one must be fixed:
    'bias-disable', 'function', 'input-enable', 'pins' do not match any of the regexes: '-pins$', 'pinctrl-[0-9]+'

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230717210055.21979-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sdm850-*: fix uart6 aliases

This is a follow up on a previous patch[1] fixing the aliases for
sdm845 devices, fix them here too.

[1]: 4772c03002c3 ("arm64: dts: qcom: sdm845-*: fix uart6 aliases")

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Link: https://lore.kernel.org/r/20230627-c630-uart-and-1p2-reg-v2-3-496b581935c1@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: c630: add debug uart

The c630 exposes its debug UART via a connector on the PCB, enable it.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Link: https://lore.kernel.org/r/20230627-c630-uart-and-1p2-reg-v2-2-496b581935c1@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: c630: add panel bridge 1p2 regulator

The VCC and VCCA supplies of the DSI<->eDP bridge are derived from
vreg_l2a_1p2 and controlled by a GPIO on the PMIC. Add the regulator
here so Linux can control it.

Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Link: https://lore.kernel.org/r/20230627-c630-uart-and-1p2-reg-v2-1-496b581935c1@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sc8180x: Add missing 'cache-unified' to L3

Add the missing property to fix the dt checker warning:

qcom/sc8180x-primus.dtb: l3-cache: 'cache-unified' is a required property

Fixes: 8575f197b077 ("arm64: dts: qcom: Introduce the SC8180x platform")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230626-topic-bindingsfixups-v1-7-254ae8642e69@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: pmi8994: Add missing OVP interrupt

Add the missing OVP interrupt. This fixes the schema warning:

wled@d800: interrupt-names: ['short'] is too short

Fixes: 37aa540cbd30 ("arm64: dts: qcom: pmi8994: Add WLED node")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230626-topic-bindingsfixups-v1-6-254ae8642e69@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: pmi8950: Add missing OVP interrupt

Add the missing OVP interrupt. This fixes the schema warning:

wled@d800: interrupt-names: ['short'] is too short

Fixes: 0d97fdf380b4 ("arm64: dts: qcom: Add configuration for PMI8950 peripheral")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230626-topic-bindingsfixups-v1-5-254ae8642e69@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: pm660l: Add missing short interrupt

Add the missing short interrupt. This fixes the schema warning:

wled@d800: interrupt-names: ['ovp'] is too short

Fixes: 7b56a804e58b ("arm64: dts: qcom: pm660l: Add WLED support")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230626-topic-bindingsfixups-v1-4-254ae8642e69@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: pm6150l: Add missing short interrupt

Add the missing short interrupt. This fixes the schema warning:

wled@d800: interrupt-names: ['ovp'] is too short

Fixes: fe508ced49dd ("arm64: dts: qcom: pm6150l: Add wled node")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Luca Weiss <luca@z3ntu.xyz>
Link: https://lore.kernel.org/r/20230626-topic-bindingsfixups-v1-3-254ae8642e69@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sdm850-c630: add missing panel supply

Panel bindings (boe,nv133fhm-n61) require supply which here actually can
be turned on/off via GPIO control:

  sdm850-lenovo-yoga-c630.dtb: panel: 'power-supply' is a required property

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Caleb Connolly <caleb.connolly@linaro.org>
Link: https://lore.kernel.org/r/20230617171512.286795-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: Add rpm-proc node for GLINK gplatforms

Rather than having the RPM GLINK channels as the only child of a dummy
top-level rpm-glink node, switch to representing the RPM as remoteproc
like all the other remoteprocs (modem DSP, ...).

This allows assigning additional subdevices to it like the MPM
interrupt-controller or rpm-master-stats.

Tested-by: Konrad Dybcio <konrad.dybcio@linaro.org> # SM6375
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20230531-rpm-rproc-v3-11-a07dcdefd918@gerhold.net
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: Add rpm-proc node for SMD platforms

Rather than having the RPM SMD channels as the only child of a dummy
SMD node, switch to representing the RPM as remoteproc like all the
other remoteprocs (WCNSS, modem DSP).

This allows assigning additional subdevices to it like the MPM
interrupt-controller or rpm-master-stats.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20230531-rpm-rproc-v3-10-a07dcdefd918@gerhold.net
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: ipq9574: Add cpu cooling maps

Add cpu cooling maps for passive trip points. The cpu cooling
device states are mapped to cpufreq based scaling frequencies.

Signed-off-by: Praveenkumar I <quic_ipkumar@quicinc.com>
Link: https://lore.kernel.org/r/20230713083101.971525-2-quic_ipkumar@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm8450: provide MDSS cfg interconnect

Add support for the MDSS cfg-cpu bus vote on the SM8450 platform.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230712121145.1994830-9-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm8250-sony-xperia: correct GPIO keys wakeup again

gpio-keys,wakeup is a deprecated property:

  m8250-sony-xperia-edo-pdx206.dtb: gpio-keys: key-camera-focus: Unevaluated properties are not allowed ('gpio-key,wakeup' was unexpected)

Fixes: a422c6a91a66 ("arm64: dts: qcom: sm8250-edo: Rectify gpio-keys")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230711063011.16222-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: qrb2210-rb1: Add regulators

Add and assign RPM regulators coming from PM2250.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230711-topic-rb1_regulator-v1-1-bc4398c35800@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sc7180: Bring back cpufreq-based DDR votes

ChromeOS folks reported that bwmon is too slow and getting rid of
statically defined CPUFREQ-based votes (effectively floor votes because of
how opp-peak-kBps is interpreted), has a major performance impact in some
common applications. Bring them back until MEMLAT support is introduced.

This is a partial revert of the commit referenced in the fixes tag.

Fixes: adc16b84e1ea ("arm64: dts: qcom: sc7180: Hook up BWMONs")
Reported-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230711-topic-7180ddr-v1-1-56e4f13afe9b@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm6350: Add BWMONs

Add the CPU and LLC BWMONs (skip the NPU ones for now) on sm6350.

There are 3 more NPU BWMONs, but these are skipped for now.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230711-topic-sm638250_bwmon-v1-4-bd4bb96b0673@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm8250: Add BWMONs

Add the CPU and LLC BWMONs (skip the NPU ones for now) on sm8250.

LPDDR4X levels are skipped, as LPDDR5 seems more popular with SM8250 and
voting for inexistent levels doesn't uptick the bus frequency, which
results in no increased bandwidth, which results in bwmon deciding we
shouldn't go higher.. you see the point!

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230711-topic-sm638250_bwmon-v1-3-bd4bb96b0673@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: msm8996: scale CBF clock according to the CPUfreq

Turn CBF into the interconnect provider. Scale CBF frequency (bandwidth)
according to CPU frequencies.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Tested-by: Yassine Oudjana <y.oudjana@protonmail.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230512001334.2983048-5-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm8250: Mark SMMUs as DMA coherent

The SMMUs on SM8250 are cache-coherent. Mark them as such.

Fixes: a89441fcd09d ("arm64: dts: qcom: sm8250: add apps_smmu node")
Fixes: 04a3605b184e ("arm64: dts: qcom: add sm8250 GPU nodes")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230704-topic-8250_pcie_dmac-v1-2-799603a980b0@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm8250: Mark PCIe hosts as DMA coherent

The PCIe hosts on SM8250 are cache-coherent. Mark them as such.

Fixes: e53bdfc00977 ("arm64: dts: qcom: sm8250: Add PCIe support")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230704-topic-8250_pcie_dmac-v1-1-799603a980b0@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm8450-hdk: add ADC-TM thermal zones

Add thermal zones controlled through the ADC-TM (ADC thermal monitoring)
PMIC interface. This includes several onboard sensors and the XO thermal
sensor.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230707123027.1510723-9-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm8450-hdk: define DIE_TEMP channels

Declare the DIE_TEMP channels provided by PMICs. Use them to provide
temperature reading for the spmi-temp-alarm thermal zones.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230707123027.1510723-8-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm8450-hdk: remove pmr735b PMIC inclusion

The 8450-HDK doesn't use PMR735B PMIC. Drop its inclusion to remove the
warning during the HDK bootup.

Fixes: 30464456a1ea ("arm64: dts: qcom: sm8450-hdk: add pmic files")
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230707123027.1510723-7-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: pmk8350: fix ADC-TM compatible string

The commit b2de43136058 ("arm64: dts: qcom: pmk8350: Add peripherals for
pmk8350") for the ADC TM (thermal monitoring device) have used the
compatible string from the vendor kernel ("qcom,adc-tm7"). Use the
proper compatible string that is defined in the upstream kernel
("qcom,spmi-adc-tm5-gen2").

Fixes: b2de43136058 ("arm64: dts: qcom: pmk8350: Add peripherals for pmk8350")
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230707123027.1510723-6-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: pmr735b: fix thermal zone name

The name of the thermal zone in pmr735b.dtsi (pmr735a-thermal) conflicts
with the thermal zone in pmr735a.dtsi. Rename the thermal zone according
to the chip name.

Fixes: 6f3426b3dea4 ("arm64: dts: qcom: pmr735b: add temp sensor and thermal zone config")
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230707123027.1510723-5-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: pm8350b: fix thermal zone name

The name of the thermal zone in pm8350b.dtsi (pm8350c-thermal) conflicts
with the thermal zone in pm8350c.dtsi. Rename the thermal zone according
to the chip name.

Fixes: 5c1399299d9d ("arm64: dts: qcom: pm8350b: add temp sensor and thermal zone config")
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230707123027.1510723-4-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: pm8350: fix thermal zone name

The name of the thermal zone in pm8350.dtsi (pm8350c-thermal) conflicts
with the thermal zone in pm8350c.dtsi. Rename the thermal zone according
to the chip name.

Fixes: 7a79b95f4288 ("arm64: dts: qcom: pm8350: add temp sensor and thermal zone config")
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230707123027.1510723-3-dmitry.baryshkov@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm8350: Use proper CPU compatibles

The Kryo names (once again) turned out to be fake. The CPUs report:

0x412fd050 (CA55 r2p0) (0 - 3)
0x411fd410 (CA78 r1p1) (4 - 6)
0x411fd440 (CX1  r1p1) (7)

Use the compatibles that reflect that.

Fixes: b7e8f433a673 ("arm64: dts: qcom: Add basic devicetree support for SM8350 SoC")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230706-topic-sm8350-cpu-compat-v1-1-f8d6a1869781@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sc8180x: Fix cluster PSCI suspend param

The value was copypasted from 8150, but 8180 expects a different one.
Confirmed with both downstream device tree and Windows DSDT, not tested
on hardware (sorry, I don't have any).

Fix it.

Fixes: 8575f197b077 ("arm64: dts: qcom: Introduce the SC8180x platform")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230705-topic-8180_sleep-v1-1-c5dce117364e@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: add missing space before {

Add missing whitespace between node name/label and opening {.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230705144226.280490-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm8350: Add missing LMH interrupts to cpufreq

Add the missing interrupts that communicate the hardware-managed
throttling to Linux.

Fixes: ccbb3abb23a5 ("arm64: dts: qcom: sm8350: Add cpufreq node")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230705-topic-sm8350_fixes-v1-3-0f69f70ccb6a@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm8350: Fix CPU idle state residency times

The present values look to have been copypasted from 8150 or 8180.
Fix that.

Fixes: 07ddb302811e ("arm64: dts: qcom: sm8350: Add CPU topology and idle-states")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230705-topic-sm8350_fixes-v1-2-0f69f70ccb6a@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm8350: Add missing cluster sleep state

SM8350's cores can be shut off, without engaging full-on SoC-wide power
collapse. Add the missing idle state to allow for that.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230705-topic-sm8350_fixes-v1-1-0f69f70ccb6a@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: qru1000-idp: Add reserved gpio list

Add reserve gpios for QRU1000 IDP platform. These gpios are
needed for modem subsystem.

Signed-off-by: Komal Bajaj <quic_kbajaj@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230705091730.32087-3-quic_kbajaj@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: qdu1000-idp: Add reserved gpio list

Add reserve gpios for QDU1000 IDP platform. These gpios are
needed for modem subsystem.

Signed-off-by: Komal Bajaj <quic_kbajaj@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230705091730.32087-2-quic_kbajaj@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: minor whitespace cleanup around '='

The DTS code coding style expects exactly one space before and after '='
sign.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230702185051.43867-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: msm8998: Provide XO to RPMCC

The RPMCC node should be fed a reference to the XO fixed clock.
Do so.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://lore.kernel.org/r/20230627-topic-98_rpmcc-v1-1-4024e43ad0fc@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sdm845-tama: Set serial indices and stdout-path

UART6 is used for debug (routed via uSD pins) and UART9 is connected
to the bluetooth chip.

Set indexed aliases to make the GENI UART driver happy and route serial
traffic through the debug uart by default.

Fixes: 30a7f99befc6 ("arm64: dts: qcom: Add support for SONY Xperia XZ2 / XZ2C / XZ3 (Tama platform)")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Link: https://lore.kernel.org/r/20230627-topic-tama_uart-v1-1-0fa790248db8@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: msm8996: Add missing interrupt to the USB2 controller

The interrupt line was previously not described. Take care of that.

Fixes: 1e39255ed29d ("arm64: dts: msm8996: Add device node for qcom,dwc3")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230627-topic-more_bindings-v1-11-6b4b6cd081e5@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: apq8039-t2: Drop inexistent property

'pin-switch-delay-us' is not used anywhere in the mainline kernel.
Drop it.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20230627-topic-more_bindings-v1-4-6b4b6cd081e5@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: msm8939: Add missing 'cache-unified' to L2

Add the missing property to fix the dt checker warning:

qcom/apq8039-t2.dtb: l2-cache: 'cache-unified' is a required property

Fixes: 61550c6c156c ("arm64: dts: qcom: Add msm8939 SoC")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20230627-topic-more_bindings-v1-3-6b4b6cd081e5@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: msm8939: Drop "qcom,idle-state-spc" compatible

As of today, the only cool and legal way to get ARM64 SMP going is
via PSCI (or spin tables). Sadly, not all chip and device vendors were
considerate of this in the early days of arm64. Qualcomm, for example
reused their tried-and-true spin-up method from MSM8974 and their Krait/
arm32 Cortex designs.

MSM8916 supports SMP with its arm32 dt overlay, as probably could 8939.
But the arm64 DT should not define non-PSCI SMP or CPUidle stuff.

Drop the qcom,idle-state-spc compatible (associated with Qualcomm-specific
CPUIdle) to make the dt checker happy:

apq8039-t2.dtb: idle-states: cpu-sleep-0:compatible:
['qcom,idle-state-spc', 'arm,idle-state'] is too long

Fixes: 61550c6c156c ("arm64: dts: qcom: Add msm8939 SoC")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Benjamin Li <benl@squareup.com>
Link: https://lore.kernel.org/r/20230627-topic-more_bindings-v1-2-6b4b6cd081e5@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sc7180: Fix DSI0_PHY reg-names

Commit 2b616f86d51b ("arm64: dts: qcom: sc7180: rename labels for DSI
nodes") broke reg-names, possibly with search-and-replace. Fix it.

Fixes: 2b616f86d51b ("arm64: dts: qcom: sc7180: rename labels for DSI nodes")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230627-topic-more_bindings-v1-1-6b4b6cd081e5@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm6375: Set up L3 scaling

Add the CPU OPP tables including core frequency and L3 bus frequency.
The L3 throughput values were chosen by studying the frequencies
available in HW LUT and picking the highest one that's less than the
CPU frequency. They will be replaced with a dynamic, bwmon-style
decision maker once support for MEMLAT is introduced upstream.

Available values from the HW LUT:
300000
556800
652800
768000
844800
921600
1171200
1382400
1497600

This commit dramatically improves overall performance of the system.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230627-topic-6375_l3-v1-1-9cb03ef05150@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sc8280xp-pmics: add explicit rtc interrupt parent

Unless explicitly specified the interrupt-parent property is inherited
from the parent node on Linux even though this may not be in full
compliance with the devicetree specification.

Following commit 2d5cab9232ba ("arm64: dts: qcom: sc8280xp-pmics:
Specify interrupt parent explicitly"), add an explicit interrupt parent
also for the PMIC RTC node for the benefit of other operating systems
which may be confused by this omission.

Note that any such OS must still implement a fallback to the root
interrupt domain as most devicetrees are written under the assumption
that the interrupt parent is inherited.

Reported-by: Patrick Wildt <patrick@blueri.se>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230627085306.6033-1-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm8450: Use standalone ICE node for UFS

With the ICE driver now merged let's convert the ufs node to use the new
style.

Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20221209-dt-binding-ufs-v5-5-c9a58c0a53f5@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: Fix "status" value

The defined value for "status" is "disabled", not "disable".

Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230626220957.3945972-1-robh@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

Merge branch '20230620-topic-sc8280_gccgdsc-v2-2-562c1428c10d@linaro.org' into arm64-for-6.6

Merge a set of new SC8280XP GCC GDSC constants from a topic branch,
in order to allow them being used in DeviceTree source.

dt-bindings: clock: qcom,gcc-sc8280xp: Add missing GDSCs

There are 10 more GDSCs that we've not been caring about, and by extension
(and perhaps even more importantly), not putting to sleep. Add them.

Fixes: a66a82f2a55e ("dt-bindings: clock: Add Qualcomm SC8280XP GCC bindings")
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20230620-topic-sc8280_gccgdsc-v2-2-562c1428c10d@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: pm8953: Add thermal zone

Define the themal zones using the temperature values found in the
downstream 4.9 sources so that the spmi-temp-alarm driver becomes
active.

Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230625-pm8953-thermal-v1-1-2b4247d2f769@z3ntu.xyz
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: ipq5332: Add common RDP dtsi file

Add a dtsi file to include interfaces that are common
across IPQ5332 RDPs.

Signed-off-by: Sridharan S N <quic_sridsn@quicinc.com>
Link: https://lore.kernel.org/r/20230623090001.27778-1-quic_sridsn@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sc8280xp: Add missing SCM interconnect

The SCM interconnect path was missing. Add it.

Fixes: 152d1faf1e2f ("arm64: dts: qcom: add SC8280XP platform")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20230622-topic-8280scmicc-v1-2-6ef318919ea5@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sa8775p-ride: enable ethernet0

Enable the first 1Gb ethernet port on sa8775p-ride development board.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Tested-by: Andrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/20230622120142.218055-6-brgl@bgdev.pl
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sa8775p-ride: add pin functions for ethernet0

Add the MDC and MDIO pin functions for ethernet0 on sa8775p-ride.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Tested-by: Andrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/20230622120142.218055-5-brgl@bgdev.pl
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sa8775p-ride: enable the SerDes PHY

Enable the internal PHY on sa8775p-ride.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Tested-by: Andrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/20230622120142.218055-4-brgl@bgdev.pl
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sa8775p: add the first 1Gb ethernet interface

Add the node for the first ethernet interface on sa8775p platforms.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Tested-by: Andrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/20230622120142.218055-3-brgl@bgdev.pl
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sa8775p: add the SGMII PHY node

Add the internal SGMII/SerDes PHY node for sa8775p platforms.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Tested-by: Andrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/20230622120142.218055-2-brgl@bgdev.pl
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sdm845-mtp: add chassis-type property

Qualcomm's Mobile Test Platforms devices are handsets, set the
chassis-type property to 'handset'.

Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230622-topic-sm8x50-upstream-chassis-type-v1-5-13f676eb71f3@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: msm89xx-mtp: add chassis-type property

Qualcomm's Mobile Test Platforms devices are handsets, set the
chassis-type property to 'handset'.

Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230622-topic-sm8x50-upstream-chassis-type-v1-4-13f676eb71f3@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm8[1234]50-hdk: add chassis-type property

Qualcomm's Hardware Development Kits devices are embedded platforms,
set the chassis-type property to 'embedded'.

Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230622-topic-sm8x50-upstream-chassis-type-v1-3-13f676eb71f3@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm8[45]50-qrd: add chassis-type property

Qualcomm's Reference Devices are handsets, set the chassis-type
property to 'handset'.

Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230622-topic-sm8x50-upstream-chassis-type-v1-2-13f676eb71f3@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm8[1235]50-mtp: add chassis-type property

Qualcomm's Mobile Test Platforms devices are handsets, set the
chassis-type property to 'handset'.

Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230622-topic-sm8x50-upstream-chassis-type-v1-1-13f676eb71f3@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: msm8939-sony-xperia-kanuti-tulip: Add missing 'chassis-type'

Sony Xperia M4 Aqua is a handset. Add the chassis-type = "handset"; to it.

Signed-off-by: Raymond Hackley <raymondhackley@protonmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230622021105.66015-1-raymondhackley@protonmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: qrb4210-rb2: Enable GPU

Enable the A610 GPU and provide a firmware path to the ZAP blob.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230620-topic-gpu_tablet_disp-v2-4-0538ea1beb0b@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm6115p-j606f: Enable GPU

Enable the A610 GPU and provide a firmware path to the ZAP blob.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230620-topic-gpu_tablet_disp-v2-3-0538ea1beb0b@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm6115p-j606f: Hook up display

Enable the required nodes, add the required pins and tweak a
regulator to enable non-simplefb display on the Tab P11.

Do note that there exists a second SKU with a different panel+touch
combo, but due to insufficient information, that will need to be
handled separately.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230620-topic-gpu_tablet_disp-v2-2-0538ea1beb0b@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm6115: Add GPU nodes

Introduce nodes for the A610 GPU and its GMU wrapper along with the
speedbin fuse entry in QFPROM.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230620-topic-gpu_tablet_disp-v2-1-0538ea1beb0b@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sc8280xp-crd: Fix naming of regulators

The external regulators in the CRD seems to have inherited their names
from the X13s DeviceTree, correct them.

Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20230620203915.141337-2-quic_bjorande@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sc8280xp-crd: Correct vreg_misc_3p3 GPIO

The vreg_misc_3p3 regulator is controlled by PMC8280_1 GPIO 2, not 1, on
the CRD.

Fixes: ccd3517faf18 ("arm64: dts: qcom: sc8280xp: Add reference device")
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230620203915.141337-1-quic_bjorande@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm8250-edo: Rectify gpio-keys

Set up the corresponding GPIOs properly and add the leftover hardware
buttons to mark this piece of the puzzle complete.

Fixes: 46e14907c716 ("arm64: dts: qcom: sm8250-edo: Add hardware keys")
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230614-topic-edo_pinsgpiopmic-v2-4-6f90bba54c53@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm8250-pdx203: Configure SLG51000 PMIC

Xperia 1 II / PRO use the Dialog SLG51000 PMIC for powering some camera
sensors. Add the required nodes to support it and remove its remnants
from -edo.dtsi, as it's absent on 5 II.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230614-topic-edo_pinsgpiopmic-v2-3-6f90bba54c53@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm8250-edo: Add GPIO line names for PMIC GPIOs

Sony ever so graciously provides GPIO line names in their downstream
kernel (though sometimes they are not 100% accurate and you can judge
that by simply looking at them and with what drivers they are used).

Add these to the PDX203&206 DTSIs to better document the hardware.

Diff between 203 and 206:
pm8009_gpios
<                         "CAM_PWR_LD_EN",
>                         "NC",

pm8150_gpios
<                         "NC",
>                         "G_ASSIST_N",
<                         "WLC_EN_N", /* GPIO_10 */
>                         "NC", /* GPIO_10 */
Which is due to 5 II having an additional Google Assistant hardware
button and 1 II having a wireless charger & different camera wiring
to accommodate the additional 3D iToF sensor.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230614-topic-edo_pinsgpiopmic-v2-2-6f90bba54c53@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm8250-edo: Add gpio line names for TLMM

Sony ever so graciously provides GPIO line names in their downstream
kernel (though sometimes they are not 100% accurate and you can judge
that by simply looking at them and with what drivers they are used).

Add these to the PDX203&206 DTSIs to better document the hardware.

Diff between 203 and 206:
<                         "CAM_PWR_A_CS",
>                         "FRONTC_PWR_EN",
<                         "CAM4_MCLK",
<                         "TOF_RST_N",
>                         "NC",
>                         "NC",
<                         "WLC_I2C_SDA",
<                         "WLC_I2C_SCL", /* GPIO_120 */
>                         "NC",
>                         "NC",
<                         "WLC_INT_N",
>                         "NC",

Which makes sense, as 203 has a 3D iToF, slightly different camera
power wiring and WLC (WireLess Charging).

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230614-topic-edo_pinsgpiopmic-v2-1-6f90bba54c53@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: msm8916-samsung-serranove: Add RT5033 PMIC with charger

For the regulators, apply the same settings as in the downstream
devicetree [1], including the "regulator-always-on" for the SAFE_LDO.
For the voltage of SAFE_LDO, however, there is only one voltage of 4.9 V
available in the mainline driver [2][3].

The values of the battery data evolve from following sources:
- precharge current: 450 mA corresponds to the default value of the chip. It
  doesn't get changed by the downstream Android driver. Therefore let's stick
  to this value.
- constant charge current: The 1000 mA are taken from the downstream devicetree
  of the serranove battery. It's not easy to spot. The value is in the line
  "input_current_limit" [4]. The rows are according to the power supply type,
  the 4th value stands for "main supply" [5]. That's the value used by the
  Android driver when a charging cable is plugged into the device.
- charge termination current: In the downstream devicetree of the battery
  that's the line "full_check_current_1st", which contains the 150 mA [6].
- precharge voltage: This one doesn't get set in the downstream Android driver.
  The chip's default is 2.8 V. That seemed too low to have a notable effect of
  handling the battery gentle. The chosen value of 3.5 V is a bit arbitrary
  and possibly rather high. As the device is already several years old and
  therefore most batteries too, a value on the safe side seems reasonable.
- constant charge voltage: The value of 4.35 V is set in the line
  "chg_float_voltage" of the downstream battery devicetree [7].

The "connector" sub-node in the extcon node, the "battery" node in the
general section and the line "power-supplies" in the fuel-gauge node result
from the way of implementation documented in the dt-bindings of
rt5033-charger [8] and mfd rt5033 [9].

[1] https://github.com/msm8916-mainline/linux-downstream/blob/GT-I9195I/arch/arm/boot/dts/samsung/msm8916/msm8916-sec-serranovelte-eur-r03.dtsi#L135-L181
[2] https://github.com/torvalds/linux/blob/v6.3/include/linux/mfd/rt5033-private.h#L211-L212
[3] https://github.com/torvalds/linux/blob/v6.3/drivers/regulator/rt5033-regulator.c#L83
[4] https://github.com/msm8916-mainline/linux-downstream/blob/GT-I9195I/arch/arm/boot/dts/samsung/msm8916/msm8916-sec-serranovelte-battery-r01.dtsi#L100
[5] https://github.com/msm8916-mainline/linux-downstream/blob/GT-I9195I/include/linux/power_supply.h#L173-L177
[6] https://github.com/msm8916-mainline/linux-downstream/blob/GT-I9195I/arch/arm/boot/dts/samsung/msm8916/msm8916-sec-serranovelte-battery-r01.dtsi#L102
[7] https://github.com/msm8916-mainline/linux-downstream/blob/GT-I9195I/arch/arm/boot/dts/samsung/msm8916/msm8916-sec-serranovelte-battery-r01.dtsi#L95
[8] https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/tree/Documentation/devicetree/bindings/power/supply/richtek,rt5033-charger.yaml?h=next-20230616
[9] https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/tree/Documentation/devicetree/bindings/mfd/richtek,rt5033.yaml?h=next-20230616

Signed-off-by: Jakob Hauser <jahau@rocketmail.com>
Link: https://lore.kernel.org/r/20230619203743.8136-1-jahau@rocketmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm8250-edo: correct ramoops pmsg-size

There is no 'msg-size' property in ramoops, so assume intention was for
'pmsg-size':

  sm8250-sony-xperia-edo-pdx206.dtb: ramoops@ffc00000: Unevaluated properties are not allowed ('msg-size' was unexpected)

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230618114442.140185-7-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

arm64: dts: qcom: sm8150-kumano: correct ramoops pmsg-size

There is no 'msg-size' property in ramoops, so assume intention was for
'pmsg-size':

  sm8150-sony-xperia-kumano-griffin.dtb: ramoops@ffc00000: Unevaluated properties are not allowed ('msg-size' was unexpected)

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230618114442.140185-6-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>