Dan Carpenter [Fri, 26 Oct 2018 07:19:51 +0000 (10:19 +0300)]
uio: Fix an Oops on load
commit
432798195bbce1f8cd33d1c0284d0538835e25fb upstream.
I was trying to solve a double free but I introduced a more serious
NULL dereference bug. The problem is that if there is an IRQ which
triggers immediately, then we need "info->uio_dev" but it's not set yet.
This patch puts the original initialization back to how it was and just
sets info->uio_dev to NULL on the error path so it should solve both
the Oops and the double free.
Fixes:
f019f07ecf6a ("uio: potential double frees if __uio_register_device() fails")
Reported-by: Mathias Thore <Mathias.Thore@infinera.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: stable <stable@vger.kernel.org>
Tested-by: Mathias Thore <Mathias.Thore@infinera.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sakari Ailus [Mon, 5 Nov 2018 14:35:44 +0000 (09:35 -0500)]
media: v4l: event: Add subscription to list before calling "add" operation
commit
92539d3eda2c090b382699bbb896d4b54e9bdece upstream.
Patch
ad608fbcf166 changed how events were subscribed to address an issue
elsewhere. As a side effect of that change, the "add" callback was called
before the event subscription was added to the list of subscribed events,
causing the first event queued by the add callback (and possibly other
events arriving soon afterwards) to be lost.
Fix this by adding the subscription to the list before calling the "add"
callback, and clean up afterwards if that fails.
Fixes:
ad608fbcf166 ("media: v4l: event: Prevent freeing event subscriptions while accessed")
Reported-by: Dave Stevenson <dave.stevenson@raspberrypi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Dave Stevenson <dave.stevenson@raspberrypi.org>
Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com>
Tested-by: Hans Verkuil <hans.verkuil@cisco.com>
Cc: stable@vger.kernel.org (for 4.14 and up)
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Mon, 26 Nov 2018 07:22:30 +0000 (08:22 +0100)]
Revert "Bluetooth: h5: Fix missing dependency on BT_HCIUART_SERDEV"
This reverts commit
209c27b04ccc679bd7da0b84c2144733ce79c8a3 which is
commit
6c3711ec64fd23a9abc8aaf59a9429569a6282df upstream.
You Ling writes that this config option isn't even in 3.18.y yet, so it
causes a regression. Revert the patch because of this.
Reported-by: youling 257 <youling257@gmail.com>
Cc: Johan Hedberg <johan.hedberg@intel.com>
Cc: Marcel Holtmann <marcel@holtmann.org>
Cc: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
YueHaibing [Thu, 8 Nov 2018 02:04:57 +0000 (02:04 +0000)]
SUNRPC: drop pointless static qualifier in xdr_get_next_encode_buffer()
[ Upstream commit
025911a5f4e36955498ed50806ad1b02f0f76288 ]
There is no need to have the '__be32 *p' variable static since new value
always be assigned before use it.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sasha Levin [Fri, 23 Nov 2018 19:05:17 +0000 (14:05 -0500)]
Revert "Revert "drm/i915: Fix mutex->owner inspection race under DEBUG_MUTEXES""
This reverts commit
bc07ee33284ac6e6872d5efad1b321ec0b7b46a4. Which is
upstream commit
a50940510e94f5fb65ffd79877a60592d85598a9.
This revert relies on upstream commit
a63b03e2d24 ("mutex: Always clear
owner field upon mutex_unlock()") being in the tree, but that commit
should not be backported.
Signed-off-by: Sasha Levin <sashal@kernel.org>
Minchan Kim [Fri, 23 Nov 2018 06:30:22 +0000 (15:30 +0900)]
zram: close udev startup race condition as default groups
commit
fef912bf860e upstream.
commit
98af4d4df889 upstream.
I got a report from Howard Chen that he saw zram and sysfs race(ie,
zram block device file is created but sysfs for it isn't yet)
when he tried to create new zram devices via hotadd knob.
v4.20 kernel fixes it by [1, 2] but it's too large size to merge
into -stable so this patch fixes the problem by registering defualt
group by Greg KH's approach[3].
This patch should be applied to every stable tree [3.16+] currently
existing from kernel.org because the problem was introduced at 2.6.37
by [4].
[1]
fef912bf860e, block: genhd: add 'groups' argument to device_add_disk
[2]
98af4d4df889, zram: register default groups with device_add_disk()
[3] http://kroah.com/log/blog/2013/06/26/how-to-create-a-sysfs-file-correctly/
[4]
33863c21e69e9, Staging: zram: Replace ioctls with sysfs interface
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Hannes Reinecke <hare@suse.com>
Tested-by: Howard Chen <howardsoc@google.com>
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jeremy Linton [Tue, 6 Nov 2018 00:14:41 +0000 (18:14 -0600)]
lib/raid6: Fix arm64 test build
[ Upstream commit
313a06e636808387822af24c507cba92703568b1 ]
The lib/raid6/test fails to build the neon objects
on arm64 because the correct machine type is 'aarch64'.
Once this is correctly enabled, the neon recovery objects
need to be added to the build.
Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Vasily Gorbik [Fri, 19 Oct 2018 13:37:01 +0000 (15:37 +0200)]
s390/vdso: add missing FORCE to build targets
[ Upstream commit
b44b136a3773d8a9c7853f8df716bd1483613cbb ]
According to Documentation/kbuild/makefiles.txt all build targets using
if_changed should use FORCE as well. Add missing FORCE to make sure
vdso targets are rebuild properly when not just immediate prerequisites
have changed but also when build command differs.
Reviewed-by: Philipp Rudo <prudo@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Marek Szyprowski [Mon, 24 Sep 2018 11:01:20 +0000 (13:01 +0200)]
clk: samsung: exynos5420: Enable PERIS clocks for suspend
[ Upstream commit
b33228029d842269e17bba591609e83ed422005d ]
Ensure that clocks for core SoC modules (including TZPC0..9 modules)
are enabled for suspend/resume cycle. This fixes suspend/resume
support on Exynos5422-based Odroid XU3/XU4 boards.
Suggested-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Sylwester Nawrocki <snawrocki@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Chengguang Xu [Wed, 13 Jun 2018 04:05:13 +0000 (12:05 +0800)]
fs/exofs: fix potential memory leak in mount option parsing
[ Upstream commit
515f1867addaba49c1c6ac73abfaffbc192c1db4 ]
There are some cases can cause memory leak when parsing
option 'osdname'.
Signed-off-by: Chengguang Xu <cgxu519@gmx.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Richard Weinberger [Fri, 15 Jun 2018 14:42:56 +0000 (16:42 +0200)]
um: Give start_idle_thread() a return code
[ Upstream commit
7ff1e34bbdc15acab823b1ee4240e94623d50ee8 ]
Fixes:
arch/um/os-Linux/skas/process.c:613:1: warning: control reaches end of
non-void function [-Wreturn-type]
longjmp() never returns but gcc still warns that the end of the function
can be reached.
Add a return code and debug aid to detect this impossible case.
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ernesto A. Fernández [Tue, 30 Oct 2018 22:06:00 +0000 (15:06 -0700)]
hfsplus: prevent btree data loss on root split
[ Upstream commit
0a3021d4f5295aa073c7bf5c5e4de60a2e292578 ]
Creating, renaming or deleting a file may cause catalog corruption and
data loss. This bug is randomly triggered by xfstests generic/027, but
here is a faster reproducer:
truncate -s 50M fs.iso
mkfs.hfsplus fs.iso
mount fs.iso /mnt
i=100
while [ $i -le 150 ]; do
touch /mnt/$i &>/dev/null
((++i))
done
i=100
while [ $i -le 150 ]; do
mv /mnt/$i /mnt/$(perl -e "print $i x82") &>/dev/null
((++i))
done
umount /mnt
fsck.hfsplus -n fs.iso
The bug is triggered whenever hfs_brec_update_parent() needs to split the
root node. The height of the btree is not increased, which leaves the new
node orphaned and its records lost.
Link: http://lkml.kernel.org/r/26d882184fc43043a810114258f45277752186c7.1535682461.git.ernesto.mnd.fernandez@gmail.com
Signed-off-by: Ernesto A. Fernández <ernesto.mnd.fernandez@gmail.com>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ernesto A. Fernández [Tue, 30 Oct 2018 22:06:07 +0000 (15:06 -0700)]
hfs: prevent btree data loss on root split
[ Upstream commit
d057c036672f33d43a5f7344acbb08cf3a8a0c09 ]
This bug is triggered whenever hfs_brec_update_parent() needs to split
the root node. The height of the btree is not increased, which leaves
the new node orphaned and its records lost. It is not possible for this
to happen on a valid hfs filesystem because the index nodes have fixed
length keys.
For reasons I ignore, the hfs module does have support for a number of
hfsplus features. A corrupt btree header may report variable length
keys and trigger this bug, so it's better to fix it.
Link: http://lkml.kernel.org/r/9750b1415685c4adca10766895f6d5ef12babdb0.1535682463.git.ernesto.mnd.fernandez@gmail.com
Signed-off-by: Ernesto A. Fernández <ernesto.mnd.fernandez@gmail.com>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jann Horn [Tue, 30 Oct 2018 22:06:38 +0000 (15:06 -0700)]
reiserfs: propagate errors from fill_with_dentries() properly
[ Upstream commit
b10298d56c9623f9b173f19959732d3184b35f4f ]
fill_with_dentries() failed to propagate errors up to
reiserfs_for_each_xattr() properly. Plumb them through.
Note that reiserfs_for_each_xattr() is only used by
reiserfs_delete_xattrs() and reiserfs_chown_xattrs(). The result of
reiserfs_delete_xattrs() is discarded anyway, the only difference there is
whether a warning is printed to dmesg. The result of
reiserfs_chown_xattrs() does matter because it can block chowning of the
file to which the xattrs belong; but either way, the resulting state can
have misaligned ownership, so my patch doesn't improve things greatly.
Credit for making me look at this code goes to Al Viro, who pointed out
that the ->actor calling convention is suboptimal and should be changed.
Link: http://lkml.kernel.org/r/20180802163335.83312-1-jannh@google.com
Signed-off-by: Jann Horn <jannh@google.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Jeff Mahoney <jeffm@suse.com>
Cc: Eric Biggers <ebiggers@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Eric Dumazet [Sun, 18 Nov 2018 05:57:02 +0000 (21:57 -0800)]
net-gro: reset skb->pkt_type in napi_reuse_skb()
[ Upstream commit
33d9a2c72f086cbf1087b2fd2d1a15aa9df14a7f ]
eth_type_trans() assumes initial value for skb->pkt_type
is PACKET_HOST.
This is indeed the value right after a fresh skb allocation.
However, it is possible that GRO merged a packet with a different
value (like PACKET_OTHERHOST in case macvlan is used), so
we need to make sure napi->skb will have pkt_type set back to
PACKET_HOST.
Otherwise, valid packets might be dropped by the stack because
their pkt_type is not PACKET_HOST.
napi_reuse_skb() was added in commit
96e93eab2033 ("gro: Add
internal interfaces for VLAN"), but this bug always has
been there.
Fixes:
96e93eab2033 ("gro: Add internal interfaces for VLAN")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Thu, 22 Nov 2018 06:32:49 +0000 (07:32 +0100)]
Linux 3.18.126
Mike Kravetz [Fri, 16 Nov 2018 23:08:04 +0000 (15:08 -0800)]
hugetlbfs: fix kernel BUG at fs/hugetlbfs/inode.c:444!
commit
5e41540c8a0f0e98c337dda8b391e5dda0cde7cf upstream.
This bug has been experienced several times by the Oracle DB team. The
BUG is in remove_inode_hugepages() as follows:
/*
* If page is mapped, it was faulted in after being
* unmapped in caller. Unmap (again) now after taking
* the fault mutex. The mutex will prevent faults
* until we finish removing the page.
*
* This race can only happen in the hole punch case.
* Getting here in a truncate operation is a bug.
*/
if (unlikely(page_mapped(page))) {
BUG_ON(truncate_op);
In this case, the elevated map count is not the result of a race.
Rather it was incorrectly incremented as the result of a bug in the huge
pmd sharing code. Consider the following:
- Process A maps a hugetlbfs file of sufficient size and alignment
(PUD_SIZE) that a pmd page could be shared.
- Process B maps the same hugetlbfs file with the same size and
alignment such that a pmd page is shared.
- Process B then calls mprotect() to change protections for the mapping
with the shared pmd. As a result, the pmd is 'unshared'.
- Process B then calls mprotect() again to chage protections for the
mapping back to their original value. pmd remains unshared.
- Process B then forks and process C is created. During the fork
process, we do dup_mm -> dup_mmap -> copy_page_range to copy page
tables. Copying page tables for hugetlb mappings is done in the
routine copy_hugetlb_page_range.
In copy_hugetlb_page_range(), the destination pte is obtained by:
dst_pte = huge_pte_alloc(dst, addr, sz);
If pmd sharing is possible, the returned pointer will be to a pte in an
existing page table. In the situation above, process C could share with
either process A or process B. Since process A is first in the list,
the returned pte is a pointer to a pte in process A's page table.
However, the check for pmd sharing in copy_hugetlb_page_range is:
/* If the pagetables are shared don't copy or take references */
if (dst_pte == src_pte)
continue;
Since process C is sharing with process A instead of process B, the
above test fails. The code in copy_hugetlb_page_range which follows
assumes dst_pte points to a huge_pte_none pte. It copies the pte entry
from src_pte to dst_pte and increments this map count of the associated
page. This is how we end up with an elevated map count.
To solve, check the dst_pte entry for huge_pte_none. If !none, this
implies PMD sharing so do not copy.
Link: http://lkml.kernel.org/r/20181105212315.14125-1-mike.kravetz@oracle.com
Fixes:
c5c99429fa57 ("fix hugepages leak due to pagetable page sharing")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Prakash Sangappa <prakash.sangappa@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Guenter Roeck [Sun, 1 Jul 2018 20:56:54 +0000 (13:56 -0700)]
configfs: replace strncpy with memcpy
commit
1823342a1f2b47a4e6f5667f67cd28ab6bc4d6cd upstream.
gcc 8.1.0 complains:
fs/configfs/symlink.c:67:3: warning:
'strncpy' output truncated before terminating nul copying as many
bytes from a string as its length
fs/configfs/symlink.c: In function 'configfs_get_link':
fs/configfs/symlink.c:63:13: note: length computed here
Using strncpy() is indeed less than perfect since the length of data to
be copied has already been determined with strlen(). Replace strncpy()
with memcpy() to address the warning and optimize the code a little.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu@cybertrust.co.jp>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Miklos Szeredi [Fri, 9 Nov 2018 14:52:16 +0000 (15:52 +0100)]
fuse: fix leaked notify reply
commit
7fabaf303458fcabb694999d6fa772cc13d4e217 upstream.
fuse_request_send_notify_reply() may fail if the connection was reset for
some reason (e.g. fs was unmounted). Don't leak request reference in this
case. Besides leaking memory, this resulted in fc->num_waiting not being
decremented and hence fuse_wait_aborted() left in a hanging and unkillable
state.
Fixes:
2d45ba381a74 ("fuse: add retrieve request")
Fixes:
b8f95e5d13f5 ("fuse: umount should wait for all requests")
Reported-and-tested-by: syzbot+6339eda9cb4ebbc4c37b@syzkaller.appspotmail.com
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Cc: <stable@vger.kernel.org> #v2.6.36
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Frank Sorenson [Tue, 30 Oct 2018 20:10:40 +0000 (15:10 -0500)]
sunrpc: correct the computation for page_ptr when truncating
commit
5d7a5bcb67c70cbc904057ef52d3fcfeb24420bb upstream.
When truncating the encode buffer, the page_ptr is getting
advanced, causing the next page to be skipped while encoding.
The page is still included in the response, so the response
contains a page of bogus data.
We need to adjust the page_ptr backwards to ensure we encode
the next page into the correct place.
We saw this triggered when concurrent directory modifications caused
nfsd4_encode_direct_fattr() to return nfserr_noent, and the resulting
call to xdr_truncate_encode() corrupted the READDIR reply.
Signed-off-by: Frank Sorenson <sorenson@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric W. Biederman [Thu, 25 Oct 2018 17:05:11 +0000 (12:05 -0500)]
mount: Prevent MNT_DETACH from disconnecting locked mounts
commit
9c8e0a1b683525464a2abe9fb4b54404a50ed2b4 upstream.
Timothy Baldwin <timbaldwin@fastmail.co.uk> wrote:
> As per mount_namespaces(7) unprivileged users should not be able to look under mount points:
>
> Mounts that come as a single unit from more privileged mount are locked
> together and may not be separated in a less privileged mount namespace.
>
> However they can:
>
> 1. Create a mount namespace.
> 2. In the mount namespace open a file descriptor to the parent of a mount point.
> 3. Destroy the mount namespace.
> 4. Use the file descriptor to look under the mount point.
>
> I have reproduced this with Linux 4.16.18 and Linux 4.18-rc8.
>
> The setup:
>
> $ sudo sysctl kernel.unprivileged_userns_clone=1
> kernel.unprivileged_userns_clone = 1
> $ mkdir -p A/B/Secret
> $ sudo mount -t tmpfs hide A/B
>
>
> "Secret" is indeed hidden as expected:
>
> $ ls -lR A
> A:
> total 0
> drwxrwxrwt 2 root root 40 Feb 12 21:08 B
>
> A/B:
> total 0
>
>
> The attack revealing "Secret":
>
> $ unshare -Umr sh -c "exec unshare -m ls -lR /proc/self/fd/4/ 4<A"
> /proc/self/fd/4/:
> total 0
> drwxr-xr-x 3 root root 60 Feb 12 21:08 B
>
> /proc/self/fd/4/B:
> total 0
> drwxr-xr-x 2 root root 40 Feb 12 21:08 Secret
>
> /proc/self/fd/4/B/Secret:
> total 0
I tracked this down to put_mnt_ns running passing UMOUNT_SYNC and
disconnecting all of the mounts in a mount namespace. Fix this by
factoring drop_mounts out of drop_collected_mounts and passing
0 instead of UMOUNT_SYNC.
There are two possible behavior differences that result from this.
- No longer setting UMOUNT_SYNC will no longer set MNT_SYNC_UMOUNT on
the vfsmounts being unmounted. This effects the lazy rcu walk by
kicking the walk out of rcu mode and forcing it to be a non-lazy
walk.
- No longer disconnecting locked mounts will keep some mounts around
longer as they stay because the are locked to other mounts.
There are only two users of drop_collected mounts: audit_tree.c and
put_mnt_ns.
In audit_tree.c the mounts are private and there are no rcu lazy walks
only calls to iterate_mounts. So the changes should have no effect
except for a small timing effect as the connected mounts are disconnected.
In put_mnt_ns there may be references from process outside the mount
namespace to the mounts. So the mounts remaining connected will
be the bug fix that is needed. That rcu walks are allowed to continue
appears not to be a problem especially as the rcu walk change was about
an implementation detail not about semantics.
Cc: stable@vger.kernel.org
Fixes:
5ff9d8a65ce8 ("vfs: Lock in place mounts from more privileged users")
Reported-by: Timothy Baldwin <timbaldwin@fastmail.co.uk>
Tested-by: Timothy Baldwin <timbaldwin@fastmail.co.uk>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric W. Biederman [Thu, 25 Oct 2018 14:04:18 +0000 (09:04 -0500)]
mount: Don't allow copying MNT_UNBINDABLE|MNT_LOCKED mounts
commit
df7342b240185d58d3d9665c0bbf0a0f5570ec29 upstream.
Jonathan Calmels from NVIDIA reported that he's able to bypass the
mount visibility security check in place in the Linux kernel by using
a combination of the unbindable property along with the private mount
propagation option to allow a unprivileged user to see a path which
was purposefully hidden by the root user.
Reproducer:
# Hide a path to all users using a tmpfs
root@castiana:~# mount -t tmpfs tmpfs /sys/devices/
root@castiana:~#
# As an unprivileged user, unshare user namespace and mount namespace
stgraber@castiana:~$ unshare -U -m -r
# Confirm the path is still not accessible
root@castiana:~# ls /sys/devices/
# Make /sys recursively unbindable and private
root@castiana:~# mount --make-runbindable /sys
root@castiana:~# mount --make-private /sys
# Recursively bind-mount the rest of /sys over to /mnnt
root@castiana:~# mount --rbind /sys/ /mnt
# Access our hidden /sys/device as an unprivileged user
root@castiana:~# ls /mnt/devices/
breakpoint cpu cstate_core cstate_pkg i915 intel_pt isa kprobe
LNXSYSTM:00 msr pci0000:00 platform pnp0 power software system
tracepoint uncore_arb uncore_cbox_0 uncore_cbox_1 uprobe virtual
Solve this by teaching copy_tree to fail if a mount turns out to be
both unbindable and locked.
Cc: stable@vger.kernel.org
Fixes:
5ff9d8a65ce8 ("vfs: Lock in place mounts from more privileged users")
Reported-by: Jonathan Calmels <jcalmels@nvidia.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric W. Biederman [Mon, 22 Oct 2018 15:21:38 +0000 (10:21 -0500)]
mount: Retest MNT_LOCKED in do_umount
commit
25d202ed820ee347edec0bf3bf553544556bf64b upstream.
It was recently pointed out that the one instance of testing MNT_LOCKED
outside of the namespace_sem is in ksys_umount.
Fix that by adding a test inside of do_umount with namespace_sem and
the mount_lock held. As it helps to fail fails the existing test is
maintained with an additional comment pointing out that it may be racy
because the locks are not held.
Cc: stable@vger.kernel.org
Reported-by: Al Viro <viro@ZenIV.linux.org.uk>
Fixes:
5ff9d8a65ce8 ("vfs: Lock in place mounts from more privileged users")
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Vasily Averin [Thu, 8 Nov 2018 03:36:23 +0000 (22:36 -0500)]
ext4: fix buffer leak in __ext4_read_dirblock() on error path
commit
de59fae0043f07de5d25e02ca360f7d57bfa5866 upstream.
Fixes:
dc6982ff4db1 ("ext4: refactor code to read directory blocks ...")
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org # 3.9
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Vasily Averin [Wed, 7 Nov 2018 16:10:21 +0000 (11:10 -0500)]
ext4: fix buffer leak in ext4_xattr_move_to_block() on error path
commit
6bdc9977fcdedf47118d2caf7270a19f4b6d8a8f upstream.
Fixes:
3f2571c1f91f ("ext4: factor out xattr moving")
Fixes:
6dd4ee7cab7e ("ext4: Expand extra_inodes space per ...")
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org # 2.6.23
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Vasily Averin [Wed, 7 Nov 2018 16:07:01 +0000 (11:07 -0500)]
ext4: release bs.bh before re-using in ext4_xattr_block_find()
commit
45ae932d246f721e6584430017176cbcadfde610 upstream.
bs.bh was taken in previous ext4_xattr_block_find() call,
it should be released before re-using
Fixes:
7e01c8e5420b ("ext3/4: fix uninitialized bs in ...")
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org # 2.6.26
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Theodore Ts'o [Wed, 7 Nov 2018 15:32:53 +0000 (10:32 -0500)]
ext4: fix possible leak of sbi->s_group_desc_leak in error path
commit
9e463084cdb22e0b56b2dfbc50461020409a5fd3 upstream.
Fixes:
bfe0a5f47ada ("ext4: add more mount time checks of the superblock")
Reported-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org # 4.18
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Theodore Ts'o [Tue, 6 Nov 2018 22:18:17 +0000 (17:18 -0500)]
ext4: avoid possible double brelse() in add_new_gdb() on error path
commit
4f32c38b4662312dd3c5f113d8bdd459887fb773 upstream.
Fixes:
b40971426a83 ("ext4: add error checking to calls to ...")
Reported-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org # 2.6.38
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Vasily Averin [Tue, 6 Nov 2018 21:16:01 +0000 (16:16 -0500)]
ext4: fix missing cleanup if ext4_alloc_flex_bg_array() fails while resizing
commit
f348e2241fb73515d65b5d77dd9c174128a7fbf2 upstream.
Fixes:
117fff10d7f1 ("ext4: grow the s_flex_groups array as needed ...")
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org # 3.7
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Vasily Averin [Tue, 6 Nov 2018 22:01:36 +0000 (17:01 -0500)]
ext4: avoid buffer leak in ext4_orphan_add() after prior errors
commit
feaf264ce7f8d54582e2f66eb82dd9dd124c94f3 upstream.
Fixes:
d745a8c20c1f ("ext4: reduce contention on s_orphan_lock")
Fixes:
6e3617e579e0 ("ext4: Handle non empty on-disk orphan link")
Cc: Dmitry Monakhov <dmonakhov@gmail.com>
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org # 2.6.34
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Vasily Averin [Tue, 6 Nov 2018 21:20:40 +0000 (16:20 -0500)]
ext4: fix possible inode leak in the retry loop of ext4_resize_fs()
commit
db6aee62406d9fbb53315fcddd81f1dc271d49fa upstream.
Fixes:
1c6bd7173d66 ("ext4: convert file system to meta_bg if needed ...")
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org # 3.7
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Vasily Averin [Sat, 3 Nov 2018 20:13:17 +0000 (16:13 -0400)]
ext4: avoid potential extra brelse in setup_new_flex_group_blocks()
commit
9e4028935cca3f9ef9b6a90df9da6f1f94853536 upstream.
Currently bh is set to NULL only during first iteration of for cycle,
then this pointer is not cleared after end of using.
Therefore rollback after errors can lead to extra brelse(bh) call,
decrements bh counter and later trigger an unexpected warning in __brelse()
Patch moves brelse() calls in body of cycle to exclude requirement of
brelse() call in rollback.
Fixes:
33afdcc5402d ("ext4: add a function which sets up group blocks ...")
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org # 3.3+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Vasily Averin [Sat, 3 Nov 2018 20:50:08 +0000 (16:50 -0400)]
ext4: add missing brelse() add_new_gdb_meta_bg()'s error path
commit
61a9c11e5e7a0dab5381afa5d9d4dd5ebf18f7a0 upstream.
Fixes:
01f795f9e0d6 ("ext4: add online resizing support for meta_bg ...")
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org # 3.7
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Vasily Averin [Sat, 3 Nov 2018 20:22:10 +0000 (16:22 -0400)]
ext4: add missing brelse() in set_flexbg_block_bitmap()'s error path
commit
cea5794122125bf67559906a0762186cf417099c upstream.
Fixes:
33afdcc5402d ("ext4: add a function which sets up group blocks ...")
Cc: stable@kernel.org # 3.3
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Vasily Averin [Sat, 3 Nov 2018 21:11:19 +0000 (17:11 -0400)]
ext4: add missing brelse() update_backups()'s error path
commit
ea0abbb648452cdb6e1734b702b6330a7448fcf8 upstream.
Fixes:
ac27a0ec112a ("ext4: initial copy of files from ext3")
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org # 2.6.19
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H. Peter Anvin (Intel) [Mon, 22 Oct 2018 16:19:05 +0000 (09:19 -0700)]
arch/alpha, termios: implement BOTHER, IBSHIFT and termios2
commit
d0ffb805b729322626639336986bc83fc2e60871 upstream.
Alpha has had c_ispeed and c_ospeed, but still set speeds in c_cflags
using arbitrary flags. Because BOTHER is not defined, the general
Linux code doesn't allow setting arbitrary baud rates, and because
CBAUDEX == 0, we can have an array overrun of the baud_rate[] table in
drivers/tty/tty_baudrate.c if (c_cflags & CBAUD) == 037.
Resolve both problems by #defining BOTHER to 037 on Alpha.
However, userspace still needs to know if setting BOTHER is actually
safe given legacy kernels (does anyone actually care about that on
Alpha anymore?), so enable the TCGETS2/TCSETS*2 ioctls on Alpha, even
though they use the same structure. Define struct termios2 just for
compatibility; it is the exact same structure as struct termios. In a
future patchset, this will be cleaned up so the uapi headers are
usable from libc.
Signed-off-by: H. Peter Anvin (Intel) <hpa@zytor.com>
Cc: Jiri Slaby <jslaby@suse.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Cc: Eugene Syromiatnikov <esyr@redhat.com>
Cc: <linux-alpha@vger.kernel.org>
Cc: <linux-serial@vger.kernel.org>
Cc: Johan Hovold <johan@kernel.org>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
H. Peter Anvin [Mon, 22 Oct 2018 16:19:04 +0000 (09:19 -0700)]
termios, tty/tty_baudrate.c: fix buffer overrun
commit
991a25194097006ec1e0d2e0814ff920e59e3465 upstream.
On architectures with CBAUDEX == 0 (Alpha and PowerPC), the code in tty_baudrate.c does
not do any limit checking on the tty_baudrate[] array, and in fact a
buffer overrun is possible on both architectures. Add a limit check to
prevent that situation.
This will be followed by a much bigger cleanup/simplification patch.
Signed-off-by: H. Peter Anvin (Intel) <hpa@zytor.com>
Requested-by: Cc: Johan Hovold <johan@kernel.org>
Cc: Jiri Slaby <jslaby@suse.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Cc: Eugene Syromiatnikov <esyr@redhat.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arnd Bergmann [Thu, 11 Oct 2018 11:06:16 +0000 (13:06 +0200)]
mtd: docg3: don't set conflicting BCH_CONST_PARAMS option
commit
be2e1c9dcf76886a83fb1c433a316e26d4ca2550 upstream.
I noticed during the creation of another bugfix that the BCH_CONST_PARAMS
option that is set by DOCG3 breaks setting variable parameters for any
other users of the BCH library code.
The only other user we have today is the MTD_NAND software BCH
implementation (most flash controllers use hardware BCH these days
and are not affected). I considered removing BCH_CONST_PARAMS entirely
because of the inherent conflict, but according to the description in
lib/bch.c there is a significant performance benefit in keeping it.
To avoid the immediate problem of the conflict between MTD_NAND_BCH
and DOCG3, this only sets the constant parameters if MTD_NAND_BCH
is disabled, which should fix the problem for all cases that
are affected. This should also work for all stable kernels.
Note that there is only one machine that actually seems to use the
DOCG3 driver (arch/arm/mach-pxa/mioa701.c), so most users should have
the driver disabled, but it almost certainly shows up if we wanted
to test random kernels on machines that use software BCH in MTD.
Fixes:
d13d19ece39f ("mtd: docg3: add ECC correction code")
Cc: stable@vger.kernel.org
Cc: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Changwei Ge [Fri, 2 Nov 2018 22:48:15 +0000 (15:48 -0700)]
ocfs2: fix a misuse a of brelse after failing ocfs2_check_dir_entry
commit
29aa30167a0a2e6045a0d6d2e89d8168132333d5 upstream.
Somehow, file system metadata was corrupted, which causes
ocfs2_check_dir_entry() to fail in function ocfs2_dir_foreach_blk_el().
According to the original design intention, if above happens we should
skip the problematic block and continue to retrieve dir entry. But
there is obviouse misuse of brelse around related code.
After failure of ocfs2_check_dir_entry(), current code just moves to
next position and uses the problematic buffer head again and again
during which the problematic buffer head is released for multiple times.
I suppose, this a serious issue which is long-lived in ocfs2. This may
cause other file systems which is also used in a the same host insane.
So we should also consider about bakcporting this patch into linux
-stable.
Link: http://lkml.kernel.org/r/HK2PR06MB045211675B43EED794E597B6D56E0@HK2PR06MB0452.apcprd06.prod.outlook.com
Signed-off-by: Changwei Ge <ge.changwei@h3c.com>
Suggested-by: Changkuo Shi <shi.changkuo@h3c.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <jiangqi903@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mikulas Patocka [Mon, 8 Oct 2018 10:57:35 +0000 (12:57 +0200)]
mach64: fix image corruption due to reading accelerator registers
commit
c09bcc91bb94ed91f1391bffcbe294963d605732 upstream.
Reading the registers without waiting for engine idle returns
unpredictable values. These unpredictable values result in display
corruption - if atyfb_imageblit reads the content of DP_PIX_WIDTH with the
bit DP_HOST_TRIPLE_EN set (from previous invocation), the driver would
never ever clear the bit, resulting in display corruption.
We don't want to wait for idle because it would degrade performance, so
this patch modifies the driver so that it never reads accelerator
registers.
HOST_CNTL doesn't have to be read, we can just write it with
HOST_BYTE_ALIGN because no other part of the driver cares if
HOST_BYTE_ALIGN is set.
DP_PIX_WIDTH is written in the functions atyfb_copyarea and atyfb_fillrect
with the default value and in atyfb_imageblit with the value set according
to the source image data.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Reviewed-by: Ville Syrjälä <syrjala@sci.fi>
Cc: stable@vger.kernel.org
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mikulas Patocka [Mon, 8 Oct 2018 10:57:34 +0000 (12:57 +0200)]
mach64: fix display corruption on big endian machines
commit
3c6c6a7878d00a3ac997a779c5b9861ff25dfcc8 upstream.
The code for manual bit triple is not endian-clean. It builds the variable
"hostdword" using byte accesses, therefore we must read the variable with
"le32_to_cpu".
The patch also enables (hardware or software) bit triple only if the image
is monochrome (image->depth). If we want to blit full-color image, we
shouldn't use the triple code.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Reviewed-by: Ville Syrjälä <syrjala@sci.fi>
Cc: stable@vger.kernel.org
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ilya Dryomov [Wed, 26 Sep 2018 16:03:16 +0000 (18:03 +0200)]
libceph: bump CEPH_MSG_MAX_DATA_LEN
commit
94e6992bb560be8bffb47f287194adf070b57695 upstream.
If the read is large enough, we end up spinning in the messenger:
libceph: osd0 192.168.122.1:6801 io error
libceph: osd0 192.168.122.1:6801 io error
libceph: osd0 192.168.122.1:6801 io error
This is a receive side limit, so only reads were affected.
Cc: stable@vger.kernel.org
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Max Filippov [Wed, 14 Nov 2018 07:46:42 +0000 (23:46 -0800)]
xtensa: fix boot parameters address translation
commit
40dc948f234b73497c3278875eb08a01d5854d3f upstream.
The bootloader may pass physical address of the boot parameters structure
to the MMUv3 kernel in the register a2. Code in the _SetupMMU block in
the arch/xtensa/kernel/head.S is supposed to map that physical address to
the virtual address in the configured virtual memory layout.
This code haven't been updated when additional 256+256 and 512+512
memory layouts were introduced and it may produce wrong addresses when
used with these layouts.
Cc: stable@vger.kernel.org
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Young_X [Wed, 3 Oct 2018 12:54:29 +0000 (12:54 +0000)]
cdrom: fix improper type cast, which can leat to information leak.
commit
e4f3aa2e1e67bb48dfbaaf1cad59013d5a5bc276 upstream.
There is another cast from unsigned long to int which causes
a bounds check to fail with specially crafted input. The value is
then used as an index in the slot array in cdrom_slot_status().
This issue is similar to CVE-2018-16658 and CVE-2018-10940.
Signed-off-by: Young_X <YangX92@hotmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Cc: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dominique Martinet [Mon, 27 Aug 2018 22:32:35 +0000 (07:32 +0900)]
9p: clear dangling pointers in p9stat_free
[ Upstream commit
62e3941776fea8678bb8120607039410b1b61a65 ]
p9stat_free is more of a cleanup function than a 'free' function as it
only frees the content of the struct; there are chances of use-after-free
if it is improperly used (e.g. p9stat_free called twice as it used to be
possible to)
Clearing dangling pointers makes the function idempotent and safer to use.
Link: http://lkml.kernel.org/r/1535410108-20650-2-git-send-email-asmadeus@codewreck.org
Signed-off-by: Dominique Martinet <dominique.martinet@cea.fr>
Reported-by: syzbot+d4252148d198410b864f@syzkaller.appspotmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Marco Felsch [Thu, 28 Jun 2018 16:20:33 +0000 (12:20 -0400)]
media: tvp5150: fix width alignment during set_selection()
[ Upstream commit
bd24db04101f45a9c1d874fe21b0c7eab7bcadec ]
The driver ignored the width alignment which exists due to the UYVY
colorspace format. Fix the width alignment and make use of the the
provided v4l2 helper function to set the width, height and all
alignments in one.
Fixes:
963ddc63e20d ("[media] media: tvp5150: Add cropping support")
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Joel Stanley [Fri, 14 Sep 2018 04:06:47 +0000 (13:36 +0930)]
powerpc/boot: Ensure _zimage_start is a weak symbol
[ Upstream commit
ee9d21b3b3583712029a0db65a4b7c081d08d3b3 ]
When building with clang crt0's _zimage_start is not marked weak, which
breaks the build when linking the kernel image:
$ objdump -t arch/powerpc/boot/crt0.o |grep _zimage_start$
0000000000000058 g .text
0000000000000000 _zimage_start
ld: arch/powerpc/boot/wrapper.a(crt0.o): in function '_zimage_start':
(.text+0x58): multiple definition of '_zimage_start';
arch/powerpc/boot/pseries-head.o:(.text+0x0): first defined here
Clang requires the .weak directive to appear after the symbol is
declared. The binutils manual says:
This directive sets the weak attribute on the comma separated list of
symbol names. If the symbols do not already exist, they will be
created.
So it appears this is different with clang. The only reference I could
see for this was an OpenBSD mailing list post[1].
Changing it to be after the declaration fixes building with Clang, and
still works with GCC.
$ objdump -t arch/powerpc/boot/crt0.o |grep _zimage_start$
0000000000000058 w .text
0000000000000000 _zimage_start
Reported to clang as https://bugs.llvm.org/show_bug.cgi?id=38921
[1] https://groups.google.com/forum/#!topic/fa.openbsd.tech/PAgKKen2YCY
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dengcheng Zhu [Tue, 11 Sep 2018 21:49:20 +0000 (14:49 -0700)]
MIPS: kexec: Mark CPU offline before disabling local IRQ
[ Upstream commit
dc57aaf95a516f70e2d527d8287a0332c481a226 ]
After changing CPU online status, it will not be sent any IPIs such as in
__flush_cache_all() on software coherency systems. Do this before disabling
local IRQ.
Signed-off-by: Dengcheng Zhu <dzhu@wavecomp.com>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/20571/
Cc: pburton@wavecomp.com
Cc: ralf@linux-mips.org
Cc: linux-mips@linux-mips.org
Cc: rachel.mozes@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nicholas Mc Guire [Sun, 9 Sep 2018 16:02:32 +0000 (12:02 -0400)]
media: pci: cx23885: handle adding to list failure
[ Upstream commit
c5d59528e24ad22500347b199d52b9368e686a42 ]
altera_hw_filt_init() which calls append_internal() assumes
that the node was successfully linked in while in fact it can
silently fail. So the call-site needs to set return to -ENOMEM
on append_internal() returning NULL and exit through the err path.
Fixes:
349bcf02e361 ("[media] Altera FPGA based CI driver module")
Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tomi Valkeinen [Wed, 26 Sep 2018 09:11:27 +0000 (12:11 +0300)]
drm/omap: fix memory barrier bug in DMM driver
[ Upstream commit
538f66ba204944470a653a4cccc5f8befdf97c22 ]
A DMM timeout "timed out waiting for done" has been observed on DRA7
devices. The timeout happens rarely, and only when the system is under
heavy load.
Debugging showed that the timeout can be made to happen much more
frequently by optimizing the DMM driver, so that there's almost no code
between writing the last DMM descriptors to RAM, and writing to DMM
register which starts the DMM transaction.
The current theory is that a wmb() does not properly ensure that the
data written to RAM is observable by all the components in the system.
This DMM timeout has caused interesting (and rare) bugs as the error
handling was not functioning properly (the error handling has been fixed
in previous commits):
* If a DMM timeout happened when a GEM buffer was being pinned for
display on the screen, a timeout error would be shown, but the driver
would continue programming DSS HW with broken buffer, leading to
SYNCLOST floods and possible crashes.
* If a DMM timeout happened when other user (say, video decoder) was
pinning a GEM buffer, a timeout would be shown but if the user
handled the error properly, no other issues followed.
* If a DMM timeout happened when a GEM buffer was being released, the
driver does not even notice the error, leading to crashes or hang
later.
This patch adds wmb() and readl() calls after the last bit is written to
RAM, which should ensure that the execution proceeds only after the data
is actually in RAM, and thus observable by DMM.
The read-back should not be needed. Further study is required to understand
if DMM is somehow special case and read-back is ok, or if DRA7's memory
barriers do not work correctly.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Daniel Axtens [Mon, 1 Oct 2018 06:21:51 +0000 (16:21 +1000)]
powerpc/nohash: fix undefined behaviour when testing page size support
[ Upstream commit
f5e284803a7206d43e26f9ffcae5de9626d95e37 ]
When enumerating page size definitions to check hardware support,
we construct a constant which is (1U << (def->shift - 10)).
However, the array of page size definitions is only initalised for
various MMU_PAGE_* constants, so it contains a number of 0-initialised
elements with def->shift == 0. This means we end up shifting by a
very large number, which gives the following UBSan splat:
================================================================================
UBSAN: Undefined behaviour in /home/dja/dev/linux/linux/arch/powerpc/mm/tlb_nohash.c:506:21
shift exponent
4294967286 is too large for 32-bit type 'unsigned int'
CPU: 0 PID: 0 Comm: swapper Not tainted 4.19.0-rc3-00045-ga604f927b012-dirty #6
Call Trace:
[
c00000000101bc20] [
c000000000a13d54] .dump_stack+0xa8/0xec (unreliable)
[
c00000000101bcb0] [
c0000000004f20a8] .ubsan_epilogue+0x18/0x64
[
c00000000101bd30] [
c0000000004f2b10] .__ubsan_handle_shift_out_of_bounds+0x110/0x1a4
[
c00000000101be20] [
c000000000d21760] .early_init_mmu+0x1b4/0x5a0
[
c00000000101bf10] [
c000000000d1ba28] .early_setup+0x100/0x130
[
c00000000101bf90] [
c000000000000528] start_here_multiplatform+0x68/0x80
================================================================================
Fix this by first checking if the element exists (shift != 0) before
constructing the constant.
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Miles Chen [Mon, 8 Oct 2018 02:39:17 +0000 (10:39 +0800)]
tty: check name length in tty_find_polling_driver()
[ Upstream commit
33a1a7be198657c8ca26ad406c4d2a89b7162bcc ]
The issue is found by a fuzzing test.
If tty_find_polling_driver() recevies an incorrect input such as
',,' or '0b', the len becomes 0 and strncmp() always return 0.
In this case, a null p->ops->poll_init() is called and it causes a kernel
panic.
Fix this by checking name length against zero in tty_find_polling_driver().
$echo ,, > /sys/module/kgdboc/parameters/kgdboc
[ 20.804451] WARNING: CPU: 1 PID: 104 at drivers/tty/serial/serial_core.c:457
uart_get_baud_rate+0xe8/0x190
[ 20.804917] Modules linked in:
[ 20.805317] CPU: 1 PID: 104 Comm: sh Not tainted 4.19.0-rc7ajb #8
[ 20.805469] Hardware name: linux,dummy-virt (DT)
[ 20.805732] pstate:
20000005 (nzCv daif -PAN -UAO)
[ 20.805895] pc : uart_get_baud_rate+0xe8/0x190
[ 20.806042] lr : uart_get_baud_rate+0xc0/0x190
[ 20.806476] sp :
ffffffc06acff940
[ 20.806676] x29:
ffffffc06acff940 x28:
0000000000002580
[ 20.806977] x27:
0000000000009600 x26:
0000000000009600
[ 20.807231] x25:
ffffffc06acffad0 x24:
00000000ffffeff0
[ 20.807576] x23:
0000000000000001 x22:
0000000000000000
[ 20.807807] x21:
0000000000000001 x20:
0000000000000000
[ 20.808049] x19:
ffffffc06acffac8 x18:
0000000000000000
[ 20.808277] x17:
0000000000000000 x16:
0000000000000000
[ 20.808520] x15:
ffffffffffffffff x14:
ffffffff00000000
[ 20.808757] x13:
ffffffffffffffff x12:
0000000000000001
[ 20.809011] x11:
0101010101010101 x10:
ffffff880d59ff5f
[ 20.809292] x9 :
ffffff880d59ff5e x8 :
ffffffc06acffaf3
[ 20.809549] x7 :
0000000000000000 x6 :
ffffff880d59ff5f
[ 20.809803] x5 :
0000000080008001 x4 :
0000000000000003
[ 20.810056] x3 :
ffffff900853e6b4 x2 :
dfffff9000000000
[ 20.810693] x1 :
ffffffc06acffad0 x0 :
0000000000000cb0
[ 20.811005] Call trace:
[ 20.811214] uart_get_baud_rate+0xe8/0x190
[ 20.811479] serial8250_do_set_termios+0xe0/0x6f4
[ 20.811719] serial8250_set_termios+0x48/0x54
[ 20.811928] uart_set_options+0x138/0x1bc
[ 20.812129] uart_poll_init+0x114/0x16c
[ 20.812330] tty_find_polling_driver+0x158/0x200
[ 20.812545] configure_kgdboc+0xbc/0x1bc
[ 20.812745] param_set_kgdboc_var+0xb8/0x150
[ 20.812960] param_attr_store+0xbc/0x150
[ 20.813160] module_attr_store+0x40/0x58
[ 20.813364] sysfs_kf_write+0x8c/0xa8
[ 20.813563] kernfs_fop_write+0x154/0x290
[ 20.813764] vfs_write+0xf0/0x278
[ 20.813951] __arm64_sys_write+0x84/0xf4
[ 20.814400] el0_svc_common+0xf4/0x1dc
[ 20.814616] el0_svc_handler+0x98/0xbc
[ 20.814804] el0_svc+0x8/0xc
[ 20.822005] Unable to handle kernel NULL pointer dereference at virtual address
0000000000000000
[ 20.826913] Mem abort info:
[ 20.827103] ESR = 0x84000006
[ 20.827352] Exception class = IABT (current EL), IL = 16 bits
[ 20.827655] SET = 0, FnV = 0
[ 20.827855] EA = 0, S1PTW = 0
[ 20.828135] user pgtable: 4k pages, 39-bit VAs, pgdp = (____ptrval____)
[ 20.828484] [
0000000000000000] pgd=
00000000aadee003, pud=
00000000aadee003, pmd=
0000000000000000
[ 20.829195] Internal error: Oops:
84000006 [#1] SMP
[ 20.829564] Modules linked in:
[ 20.829890] CPU: 1 PID: 104 Comm: sh Tainted: G W 4.19.0-rc7ajb #8
[ 20.830545] Hardware name: linux,dummy-virt (DT)
[ 20.830829] pstate:
60000085 (nZCv daIf -PAN -UAO)
[ 20.831174] pc : (null)
[ 20.831457] lr : serial8250_do_set_termios+0x358/0x6f4
[ 20.831727] sp :
ffffffc06acff9b0
[ 20.831936] x29:
ffffffc06acff9b0 x28:
ffffff9008d7c000
[ 20.832267] x27:
ffffff900969e16f x26:
0000000000000000
[ 20.832589] x25:
ffffff900969dfb0 x24:
0000000000000000
[ 20.832906] x23:
ffffffc06acffad0 x22:
ffffff900969e160
[ 20.833232] x21:
0000000000000000 x20:
ffffffc06acffac8
[ 20.833559] x19:
ffffff900969df90 x18:
0000000000000000
[ 20.833878] x17:
0000000000000000 x16:
0000000000000000
[ 20.834491] x15:
ffffffffffffffff x14:
ffffffff00000000
[ 20.834821] x13:
ffffffffffffffff x12:
0000000000000001
[ 20.835143] x11:
0101010101010101 x10:
ffffff880d59ff5f
[ 20.835467] x9 :
ffffff880d59ff5e x8 :
ffffffc06acffaf3
[ 20.835790] x7 :
0000000000000000 x6 :
ffffff880d59ff5f
[ 20.836111] x5 :
c06419717c314100 x4 :
0000000000000007
[ 20.836419] x3 :
0000000000000000 x2 :
0000000000000000
[ 20.836732] x1 :
0000000000000001 x0 :
ffffff900969df90
[ 20.837100] Process sh (pid: 104, stack limit = 0x(____ptrval____))
[ 20.837396] Call trace:
[ 20.837566] (null)
[ 20.837816] serial8250_set_termios+0x48/0x54
[ 20.838089] uart_set_options+0x138/0x1bc
[ 20.838570] uart_poll_init+0x114/0x16c
[ 20.838834] tty_find_polling_driver+0x158/0x200
[ 20.839119] configure_kgdboc+0xbc/0x1bc
[ 20.839380] param_set_kgdboc_var+0xb8/0x150
[ 20.839658] param_attr_store+0xbc/0x150
[ 20.839920] module_attr_store+0x40/0x58
[ 20.840183] sysfs_kf_write+0x8c/0xa8
[ 20.840183] sysfs_kf_write+0x8c/0xa8
[ 20.840440] kernfs_fop_write+0x154/0x290
[ 20.840702] vfs_write+0xf0/0x278
[ 20.840942] __arm64_sys_write+0x84/0xf4
[ 20.841209] el0_svc_common+0xf4/0x1dc
[ 20.841471] el0_svc_handler+0x98/0xbc
[ 20.841713] el0_svc+0x8/0xc
[ 20.842057] Code: bad PC value
[ 20.842764] ---[ end trace
a8835d7de79aaadf ]---
[ 20.843134] Kernel panic - not syncing: Fatal exception
[ 20.843515] SMP: stopping secondary CPUs
[ 20.844289] Kernel Offset: disabled
[ 20.844634] CPU features: 0x0,
21806002
[ 20.844857] Memory Limit: none
[ 20.845172] ---[ end Kernel panic - not syncing: Fatal exception ]---
Signed-off-by: Miles Chen <miles.chen@mediatek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Corey Wright [Sun, 11 Nov 2018 08:22:36 +0000 (02:22 -0600)]
dm: remove duplicate dm_get_live_table() in __dm_destroy()
[3.18.y only, to fix a previous patch]
__dm_destroy() takes io_barrier SRCU lock (dm_get_live_table) twice
which leads to a deadlock. Remove taking lock before holding
suspend_lock to prevent a different potential deadlock.
Signed-off-by: Corey Wright <undefined@pobox.com>
Fixes:
e1db66a5fdcc ("dm: fix AB-BA deadlock in __dm_destroy()")
Cc: Sasha Levin <sashal@kernel.org>
Nicolas Pitre [Tue, 30 Oct 2018 17:26:15 +0000 (13:26 -0400)]
Cramfs: fix abad comparison when wrap-arounds occur
commit
672ca9dd13f1aca0c17516f76fc5b0e8344b3e46 upstream.
It is possible for corrupted filesystem images to produce very large
block offsets that may wrap when a length is added, and wrongly pass
the buffer size test.
Reported-by: Anatoly Trosinenko <anatoly.trosinenko@gmail.com>
Signed-off-by: Nicolas Pitre <nico@linaro.org>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mauro Carvalho Chehab [Fri, 14 Sep 2018 02:46:29 +0000 (22:46 -0400)]
media: em28xx: make v4l2-compliance happier by starting sequence on zero
commit
afeaade90db4c5dab93f326d9582be1d5954a198 upstream.
The v4l2-compliance tool complains if a video doesn't start
with a zero sequence number.
While this shouldn't cause any real problem for apps, let's
make it happier, in order to better check the v4l2-compliance
differences before and after patchsets.
This is actually an old issue. It is there since at least its
videobuf2 conversion, e. g. changeset
3829fadc461 ("[media]
em28xx: convert to videobuf2"), if VB1 wouldn't suffer from
the same issue.
Cc: stable@vger.kernel.org
Fixes:
d3829fadc461 ("[media] em28xx: convert to videobuf2")
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mauro Carvalho Chehab [Fri, 14 Sep 2018 04:20:21 +0000 (00:20 -0400)]
media: em28xx: fix input name for Terratec AV 350
commit
15644bfa195bd166d0a5ed76ae2d587f719c3dac upstream.
Instead of using a register value, use an AMUX name, as otherwise
VIDIOC_G_AUDIO would fail.
Cc: stable@vger.kernel.org
Fixes:
766ed64de554 ("V4L/DVB (11827): Add support for Terratec Grabster AV350")
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mauro Carvalho Chehab [Fri, 14 Sep 2018 03:22:40 +0000 (23:22 -0400)]
media: em28xx: use a default format if TRY_FMT fails
commit
f823ce2a1202d47110a7ef86b65839f0be8adc38 upstream.
Follow the V4L2 spec, as warned by v4l2-compliance:
warn: v4l2-test-formats.cpp(732): TRY_FMT cannot handle an invalid pixelformat.
warn: v4l2-test-formats.cpp(733): This may or may not be a problem. For more information see:
warn: v4l2-test-formats.cpp(734): http://www.mail-archive.com/linux-media@vger.kernel.org/msg56550.html
Cc: stable@vger.kernel.org
Fixes:
bddcf63313c6 ("V4L/DVB (9927): em28xx: use a more standard way to specify video formats")
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
He Zhe [Fri, 17 Aug 2018 14:42:28 +0000 (22:42 +0800)]
kgdboc: Passing ekgdboc to command line causes panic
commit
1bd54d851f50dea6af30c3e6ff4f3e9aab5558f9 upstream.
kgdboc_option_setup does not check input argument before passing it
to strlen. The argument would be a NULL pointer if "ekgdboc", without
its value, is set in command line and thus cause the following panic.
PANIC: early exception 0xe3 IP 10:
ffffffff8fbbb620 error 0 cr2 0x0
[ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 4.18-rc8+ #1
[ 0.000000] RIP: 0010:strlen+0x0/0x20
...
[ 0.000000] Call Trace
[ 0.000000] ? kgdboc_option_setup+0x9/0xa0
[ 0.000000] ? kgdboc_early_init+0x6/0x1b
[ 0.000000] ? do_early_param+0x4d/0x82
[ 0.000000] ? parse_args+0x212/0x330
[ 0.000000] ? rdinit_setup+0x26/0x26
[ 0.000000] ? parse_early_options+0x20/0x23
[ 0.000000] ? rdinit_setup+0x26/0x26
[ 0.000000] ? parse_early_param+0x2d/0x39
[ 0.000000] ? setup_arch+0x2f7/0xbf4
[ 0.000000] ? start_kernel+0x5e/0x4c2
[ 0.000000] ? load_ucode_bsp+0x113/0x12f
[ 0.000000] ? secondary_startup_64+0xa5/0xb0
This patch adds a check to prevent the panic.
Cc: stable@vger.kernel.org
Cc: jason.wessel@windriver.com
Cc: gregkh@linuxfoundation.org
Cc: jslaby@suse.com
Signed-off-by: He Zhe <zhe.he@windriver.com>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Maciej W. Rozycki [Wed, 3 Oct 2018 12:21:07 +0000 (13:21 +0100)]
TC: Set DMA masks for devices
commit
3f2aa244ee1a0d17ed5b6c86564d2c1b24d1c96b upstream.
Fix a TURBOchannel support regression with commit
205e1b7f51e4
("dma-mapping: warn when there is no coherent_dma_mask") that caused
coherent DMA allocations to produce a warning such as:
defxx: v1.11 2014/07/01 Lawrence V. Stefani and others
tc1: DEFTA at MMIO addr = 0x1e900000, IRQ = 20, Hardware addr = 08-00-2b-a3-a3-29
------------[ cut here ]------------
WARNING: CPU: 0 PID: 1 at ./include/linux/dma-mapping.h:516 dfx_dev_register+0x670/0x678
Modules linked in:
CPU: 0 PID: 1 Comm: swapper Not tainted 4.19.0-rc6 #2
Stack :
ffffffff8009ffc0 fffffffffffffec0 0000000000000000 ffffffff80647650
0000000000000000 0000000000000000 ffffffff806f5f80 ffffffffffffffff
0000000000000000 0000000000000000 0000000000000001 ffffffff8065d4e8
98000000031b6300 ffffffff80563478 ffffffff805685b0 ffffffffffffffff
0000000000000000 ffffffff805d6720 0000000000000204 ffffffff80388df8
0000000000000000 0000000000000009 ffffffff8053efd0 ffffffff806657d0
0000000000000000 ffffffff803177f8 0000000000000000 ffffffff806d0000
9800000003078000 980000000307b9e0 000000001e900000 ffffffff80067940
0000000000000000 ffffffff805d6720 0000000000000204 ffffffff80388df8
ffffffff805176c0 ffffffff8004dc78 0000000000000000 ffffffff80067940
...
Call Trace:
[<
ffffffff8004dc78>] show_stack+0xa0/0x130
[<
ffffffff80067940>] __warn+0x128/0x170
---[ end trace
b1d1e094f67f3bb2 ]---
This is because the TURBOchannel bus driver fails to set the coherent
DMA mask for devices enumerated.
Set the regular and coherent DMA masks for TURBOchannel devices then,
observing that the bus protocol supports a 34-bit (16GiB) DMA address
space, by interpreting the value presented in the address cycle across
the 32 `ad' lines as a 32-bit word rather than byte address[1]. The
architectural size of the TURBOchannel DMA address space exceeds the
maximum amount of RAM any actual TURBOchannel system in existence may
have, hence both masks are the same.
This removes the warning shown above.
References:
[1] "TURBOchannel Hardware Specification", EK-369AA-OD-007B, Digital
Equipment Corporation, January 1993, Section "DMA", pp. 1-15 -- 1-17
Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Patchwork: https://patchwork.linux-mips.org/patch/20835/
Fixes:
205e1b7f51e4 ("dma-mapping: warn when there is no coherent_dma_mask")
Cc: stable@vger.kernel.org # 4.16+
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Wenwen Wang [Wed, 3 Oct 2018 16:43:59 +0000 (11:43 -0500)]
dm ioctl: harden copy_params()'s copy_from_user() from malicious users
commit
800a7340ab7dd667edf95e74d8e4f23a17e87076 upstream.
In copy_params(), the struct 'dm_ioctl' is first copied from the user
space buffer 'user' to 'param_kernel' and the field 'data_size' is
checked against 'minimum_data_size' (size of 'struct dm_ioctl' payload
up to its 'data' member). If the check fails, an error code EINVAL will be
returned. Otherwise, param_kernel->data_size is used to do a second copy,
which copies from the same user-space buffer to 'dmi'. After the second
copy, only 'dmi->data_size' is checked against 'param_kernel->data_size'.
Given that the buffer 'user' resides in the user space, a malicious
user-space process can race to change the content in the buffer between
the two copies. This way, the attacker can inject inconsistent data
into 'dmi' (versus previously validated 'param_kernel').
Fix redundant copying of 'minimum_data_size' from user-space buffer by
using the first copy stored in 'param_kernel'. Also remove the
'data_size' check after the second copy because it is now unnecessary.
Cc: stable@vger.kernel.org
Signed-off-by: Wenwen Wang <wang6495@umn.edu>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Amir Goldstein [Fri, 28 Sep 2018 17:41:48 +0000 (20:41 +0300)]
lockd: fix access beyond unterminated strings in prints
commit
93f38b6fae0ea8987e22d9e6c38f8dfdccd867ee upstream.
printk format used %*s instead of %.*s, so hostname_len does not limit
the number of bytes accessed from hostname.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Trond Myklebust [Tue, 9 Oct 2018 19:54:15 +0000 (15:54 -0400)]
nfsd: Fix an Oops in free_session()
commit
bb6ad5572c0022e17e846b382d7413cdcf8055be upstream.
In call_xpt_users(), we delete the entry from the list, but we
do not reinitialise it. This triggers the list poisoning when
we later call unregister_xpt_user() in nfsd4_del_conns().
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Trond Myklebust [Tue, 18 Sep 2018 14:07:44 +0000 (10:07 -0400)]
NFSv4.1: Fix the r/wsize checking
commit
943cff67b842839f4f35364ba2db5c2d3f025d94 upstream.
The intention of nfs4_session_set_rwsize() was to cap the r/wsize to the
buffer sizes negotiated by the CREATE_SESSION. The initial code had a
bug whereby we would not check the values negotiated by nfs_probe_fsinfo()
(the assumption being that CREATE_SESSION will always negotiate buffer values
that are sane w.r.t. the server's preferred r/wsizes) but would only check
values set by the user in the 'mount' command.
The code was changed in 4.11 to _always_ set the r/wsize, meaning that we
now never use the server preferred r/wsizes. This is the regression that
this patch fixes.
Also rename the function to nfs4_session_limit_rwsize() in order to avoid
future confusion.
Fixes:
033853325fe3 (NFSv4.1 respect server's max size in CREATE_SESSION")
Cc: stable@vger.kernel.org # v4.11+
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
He Zhe [Sat, 29 Sep 2018 16:45:50 +0000 (00:45 +0800)]
printk: Fix panic caused by passing log_buf_len to command line
commit
277fcdb2cfee38ccdbe07e705dbd4896ba0c9930 upstream.
log_buf_len_setup does not check input argument before passing it to
simple_strtoull. The argument would be a NULL pointer if "log_buf_len",
without its value, is set in command line and thus causes the following
panic.
PANIC: early exception 0xe3 IP 10:
ffffffffaaeacd0d error 0 cr2 0x0
[ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 4.19.0-rc4-yocto-standard+ #1
[ 0.000000] RIP: 0010:_parse_integer_fixup_radix+0xd/0x70
...
[ 0.000000] Call Trace:
[ 0.000000] simple_strtoull+0x29/0x70
[ 0.000000] memparse+0x26/0x90
[ 0.000000] log_buf_len_setup+0x17/0x22
[ 0.000000] do_early_param+0x57/0x8e
[ 0.000000] parse_args+0x208/0x320
[ 0.000000] ? rdinit_setup+0x30/0x30
[ 0.000000] parse_early_options+0x29/0x2d
[ 0.000000] ? rdinit_setup+0x30/0x30
[ 0.000000] parse_early_param+0x36/0x4d
[ 0.000000] setup_arch+0x336/0x99e
[ 0.000000] start_kernel+0x6f/0x4ee
[ 0.000000] x86_64_start_reservations+0x24/0x26
[ 0.000000] x86_64_start_kernel+0x6f/0x72
[ 0.000000] secondary_startup_64+0xa4/0xb0
This patch adds a check to prevent the panic.
Link: http://lkml.kernel.org/r/1538239553-81805-1-git-send-email-zhe.he@windriver.com
Cc: stable@vger.kernel.org
Cc: rostedt@goodmis.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: He Zhe <zhe.he@windriver.com>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Steve French [Sun, 28 Oct 2018 18:13:23 +0000 (13:13 -0500)]
smb3: on kerberos mount if server doesn't specify auth type use krb5
commit
926674de6705f0f1dbf29a62fd758d0977f535d6 upstream.
Some servers (e.g. Azure) do not include a spnego blob in the SMB3
negotiate protocol response, so on kerberos mounts ("sec=krb5")
we can fail, as we expected the server to list its supported
auth types (OIDs in the spnego blob in the negprot response).
Change this so that on krb5 mounts we default to trying krb5 if the
server doesn't list its supported protocol mechanisms.
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
CC: Stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Steve French [Fri, 19 Oct 2018 05:45:21 +0000 (00:45 -0500)]
smb3: do not attempt cifs operation in smb3 query info error path
commit
1e77a8c204c9d1b655c61751b8ad0fde22421dbb upstream.
If backupuid mount option is sent, we can incorrectly retry
(on access denied on query info) with a cifs (FindFirst) operation
on an smb3 mount which causes the server to force the session close.
We set backup intent on open so no need for this fallback.
See kernel bugzilla 201435
Signed-off-by: Steve French <stfrench@microsoft.com>
CC: Stable <stable@vger.kernel.org>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Steve French [Sun, 16 Sep 2018 04:04:41 +0000 (23:04 -0500)]
smb3: allow stats which track session and share reconnects to be reset
commit
2c887635cd6ab3af619dc2be94e5bf8f2e172b78 upstream.
Currently, "echo 0 > /proc/fs/cifs/Stats" resets all of the stats
except the session and share reconnect counts. Fix it to
reset those as well.
CC: Stable <stable@vger.kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andreas Kemnade [Sat, 22 Sep 2018 19:20:54 +0000 (21:20 +0200)]
w1: omap-hdq: fix missing bus unregister at removal
commit
a007734618fee1bf35556c04fa498d41d42c7301 upstream.
The bus master was not removed after unloading the module
or unbinding the driver. That lead to oopses like this
[ 127.842987] Unable to handle kernel paging request at virtual address
bf01d04c
[ 127.850646] pgd =
70e3cd9a
[ 127.853698] [
bf01d04c] *pgd=
8f908811, *pte=
00000000, *ppte=
00000000
[ 127.860412] Internal error: Oops:
80000007 [#1] PREEMPT SMP ARM
[ 127.866668] Modules linked in: bq27xxx_battery overlay [last unloaded: omap_hdq]
[ 127.874542] CPU: 0 PID: 1022 Comm: w1_bus_master1 Not tainted 4.19.0-rc4-00001-g2d51da718324 #12
[ 127.883819] Hardware name: Generic OMAP36xx (Flattened Device Tree)
[ 127.890441] PC is at 0xbf01d04c
[ 127.893798] LR is at w1_search_process_cb+0x4c/0xfc
[ 127.898956] pc : [<
bf01d04c>] lr : [<
c05f9580>] psr:
a0070013
[ 127.905609] sp :
cf885f48 ip :
bf01d04c fp :
ddf1e11c
[ 127.911132] r10:
cf8fe040 r9 :
c05f8d00 r8 :
cf8fe040
[ 127.916656] r7 :
000000f0 r6 :
cf8fe02c r5 :
cf8fe000 r4 :
cf8fe01c
[ 127.923553] r3 :
c05f8d00 r2 :
000000f0 r1 :
cf8fe000 r0 :
dde1ef10
[ 127.930450] Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none
[ 127.938018] Control:
10c5387d Table:
8f8f0019 DAC:
00000051
[ 127.944091] Process w1_bus_master1 (pid: 1022, stack limit = 0x9135699f)
[ 127.951171] Stack: (0xcf885f48 to 0xcf886000)
[ 127.955810] 5f40:
cf8fe000 00000000 cf884000 cf8fe090 000003e8 c05f8d00
[ 127.964477] 5f60:
dde5fc34 c05f9700 ddf1e100 ddf1e540 cf884000 cf8fe000 c05f9694 00000000
[ 127.973114] 5f80:
dde5fc34 c01499a4 00000000 ddf1e540 c0149874 00000000 00000000 00000000
[ 127.981781] 5fa0:
00000000 00000000 00000000 c01010e8 00000000 00000000 00000000 00000000
[ 127.990447] 5fc0:
00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 127.999114] 5fe0:
00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000
[ 128.007781] [<
c05f9580>] (w1_search_process_cb) from [<
c05f9700>] (w1_process+0x6c/0x118)
[ 128.016479] [<
c05f9700>] (w1_process) from [<
c01499a4>] (kthread+0x130/0x148)
[ 128.024047] [<
c01499a4>] (kthread) from [<
c01010e8>] (ret_from_fork+0x14/0x2c)
[ 128.031677] Exception stack(0xcf885fb0 to 0xcf885ff8)
[ 128.037017] 5fa0:
00000000 00000000 00000000 00000000
[ 128.045684] 5fc0:
00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 128.054351] 5fe0:
00000000 00000000 00000000 00000000 00000013 00000000
[ 128.061340] Code: bad PC value
[ 128.064697] ---[ end trace
af066e33c0e14119 ]---
Cc: <stable@vger.kernel.org>
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eugen Hristev [Mon, 24 Sep 2018 07:51:44 +0000 (10:51 +0300)]
iio: adc: at91: fix wrong channel number in triggered buffer mode
commit
aea835f2dc8a682942b859179c49ad1841a6c8b9 upstream.
When channels are registered, the hardware channel number is not the
actual iio channel number.
This is because the driver is probed with a certain number of accessible
channels. Some pins are routed and some not, depending on the description of
the board in the DT.
Because of that, channels 0,1,2,3 can correspond to hardware channels
2,3,4,5 for example.
In the buffered triggered case, we need to do the translation accordingly.
Fixed the channel number to stop reading the wrong channel.
Fixes:
0e589d5fb ("ARM: AT91: IIO: Add AT91 ADC driver.")
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eugen Hristev [Mon, 24 Sep 2018 07:51:43 +0000 (10:51 +0300)]
iio: adc: at91: fix acking DRDY irq on simple conversions
commit
bc1b45326223e7e890053cf6266357adfa61942d upstream.
When doing simple conversions, the driver did not acknowledge the DRDY irq.
If this irq status is not acked, it will be left pending, and as soon as a
trigger is enabled, the irq handler will be called, it doesn't know why
this status has occurred because no channel is pending, and then it will go
int a irq loop and board will hang.
To avoid this situation, read the LCDR after a raw conversion is done.
Fixes:
0e589d5fb ("ARM: AT91: IIO: Add AT91 ADC driver.")
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arnd Bergmann [Tue, 30 Oct 2018 22:07:32 +0000 (15:07 -0700)]
kbuild: fix kernel/bounds.c 'W=1' warning
commit
6a32c2469c3fbfee8f25bcd20af647326650a6cf upstream.
Building any configuration with 'make W=1' produces a warning:
kernel/bounds.c:16:6: warning: no previous prototype for 'foo' [-Wmissing-prototypes]
When also passing -Werror, this prevents us from building any other files.
Nobody ever calls the function, but we can't make it 'static' either
since we want the compiler output.
Calling it 'main' instead however avoids the warning, because gcc
does not insist on having a declaration for main.
Link: http://lkml.kernel.org/r/20181005083313.2088252-1-arnd@arndb.de
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reported-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Cc: David Laight <David.Laight@ACULAB.COM>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Biggers [Fri, 7 Sep 2018 21:33:24 +0000 (14:33 -0700)]
ima: fix showing large 'violations' or 'runtime_measurements_count'
commit
1e4c8dafbb6bf72fb5eca035b861e39c5896c2b7 upstream.
The 12 character temporary buffer is not necessarily long enough to hold
a 'long' value. Increase it.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ondrej Mosnacek [Thu, 13 Sep 2018 08:51:31 +0000 (10:51 +0200)]
crypto: lrw - Fix out-of bounds access on counter overflow
commit
fbe1a850b3b1522e9fc22319ccbbcd2ab05328d2 upstream.
When the LRW block counter overflows, the current implementation returns
128 as the index to the precomputed multiplication table, which has 128
entries. This patch fixes it to return the correct value (127).
Fixes:
64470f1b8510 ("[CRYPTO] lrw: Liskov Rivest Wagner, a tweakable narrow block cipher mode")
Cc: <stable@vger.kernel.org> # 2.6.20+
Reported-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric W. Biederman [Thu, 13 Sep 2018 09:28:01 +0000 (11:28 +0200)]
signal/GenWQE: Fix sending of SIGKILL
commit
0ab93e9c99f8208c0a1a7b7170c827936268c996 upstream.
The genweq_add_file and genwqe_del_file by caching current without
using reference counting embed the assumption that a file descriptor
will never be passed from one process to another. It even embeds the
assumption that the the thread that opened the file will be in
existence when the process terminates. Neither of which are
guaranteed to be true.
Therefore replace caching the task_struct of the opener with
pid of the openers thread group id. All the knowledge of the
opener is used for is as the target of SIGKILL and a SIGKILL
will kill the entire process group.
Rename genwqe_force_sig to genwqe_terminate, remove it's unncessary
signal argument, update it's ownly caller, and use kill_pid
instead of force_sig.
The work force_sig does in changing signal handling state is not
relevant to SIGKILL sent as SEND_SIG_PRIV. The exact same processess
will be killed just with less work, and less confusion. The work done
by force_sig is really only needed for handling syncrhonous
exceptions.
It will still be possible to cause genwqe_device_remove to wait
8 seconds by passing a file descriptor to another process but
the possible user after free is fixed.
Fixes:
eaf4722d4645 ("GenWQE Character device and DDCB queue")
Cc: stable@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Frank Haverkamp <haver@linux.vnet.ibm.com>
Cc: Joerg-Stephan Vogt <jsvogt@de.ibm.com>
Cc: Michael Jung <mijung@gmx.net>
Cc: Michael Ruettger <michael@ibmra.de>
Cc: Kleber Sacilotto de Souza <klebers@linux.vnet.ibm.com>
Cc: Sebastian Ott <sebott@linux.vnet.ibm.com>
Cc: Eberhard S. Amann <esa@linux.vnet.ibm.com>
Cc: Gabriel Krisman Bertazi <krisman@linux.vnet.ibm.com>
Cc: Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lukas Czerner [Wed, 3 Oct 2018 01:18:45 +0000 (21:18 -0400)]
ext4: initialize retries variable in ext4_da_write_inline_data_begin()
commit
625ef8a3acd111d5f496d190baf99d1a815bd03e upstream.
Variable retries is not initialized in ext4_da_write_inline_data_begin()
which can lead to nondeterministic number of retries in case we hit
ENOSPC. Initialize retries to zero as we do everywhere else.
Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Fixes:
bc0ca9df3b2a ("ext4: retry allocation when inline->extent conversion failed")
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Al Viro [Sat, 13 Oct 2018 04:19:13 +0000 (00:19 -0400)]
gfs2_meta: ->mount() can get NULL dev_name
commit
3df629d873f8683af6f0d34dfc743f637966d483 upstream.
get in sync with mount_bdev() handling of the same
Reported-by: syzbot+c54f8e94e6bba03b04e9@syzkaller.appspotmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jan Kara [Fri, 5 Oct 2018 22:44:40 +0000 (18:44 -0400)]
jbd2: fix use after free in jbd2_log_do_checkpoint()
commit
ccd3c4373eacb044eb3832966299d13d2631f66f upstream.
The code cleaning transaction's lists of checkpoint buffers has a bug
where it increases bh refcount only after releasing
journal->j_list_lock. Thus the following race is possible:
CPU0 CPU1
jbd2_log_do_checkpoint()
jbd2_journal_try_to_free_buffers()
__journal_try_to_free_buffer(bh)
...
while (transaction->t_checkpoint_io_list)
...
if (buffer_locked(bh)) {
<-- IO completes now, buffer gets unlocked -->
spin_unlock(&journal->j_list_lock);
spin_lock(&journal->j_list_lock);
__jbd2_journal_remove_checkpoint(jh);
spin_unlock(&journal->j_list_lock);
try_to_free_buffers(page);
get_bh(bh) <-- accesses freed bh
Fix the problem by grabbing bh reference before unlocking
journal->j_list_lock.
Fixes:
dc6e8d669cf5 ("jbd2: don't call get_bh() before calling __jbd2_journal_remove_checkpoint()")
Fixes:
be1158cc615f ("jbd2: fold __process_buffer() into jbd2_log_do_checkpoint()")
Reported-by: syzbot+7f4a27091759e2fe7453@syzkaller.appspotmail.com
CC: stable@vger.kernel.org
Reviewed-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stefan Nuernberger [Mon, 17 Sep 2018 17:46:53 +0000 (19:46 +0200)]
net/ipv4: defensive cipso option parsing
commit
076ed3da0c9b2f88d9157dbe7044a45641ae369e upstream.
commit
40413955ee26 ("Cipso: cipso_v4_optptr enter infinite loop") fixed
a possible infinite loop in the IP option parsing of CIPSO. The fix
assumes that ip_options_compile filtered out all zero length options and
that no other one-byte options beside IPOPT_END and IPOPT_NOOP exist.
While this assumption currently holds true, add explicit checks for zero
length and invalid length options to be safe for the future. Even though
ip_options_compile should have validated the options, the introduction of
new one-byte options can still confuse this code without the additional
checks.
Signed-off-by: Stefan Nuernberger <snu@amazon.com>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: Simon Veith <sveith@amazon.de>
Cc: stable@vger.kernel.org
Acked-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric W. Biederman [Mon, 3 Sep 2018 18:02:46 +0000 (20:02 +0200)]
signal: Always deliver the kernel's SIGKILL and SIGSTOP to a pid namespace init
[ Upstream commit
3597dfe01d12f570bc739da67f857fd222a3ea66 ]
Instead of playing whack-a-mole and changing SEND_SIG_PRIV to
SEND_SIG_FORCED throughout the kernel to ensure a pid namespace init
gets signals sent by the kernel, stop allowing a pid namespace init to
ignore SIGKILL or SIGSTOP sent by the kernel. A pid namespace init is
only supposed to be able to ignore signals sent from itself and
children with SIG_DFL.
Fixes:
921cf9f63089 ("signals: protect cinit from unblocked SIG_DFL signals")
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
James Smart [Mon, 10 Sep 2018 17:30:45 +0000 (10:30 -0700)]
scsi: lpfc: Correct soft lockup when running mds diagnostics
[ Upstream commit
0ef01a2d95fd62bb4f536e7ce4d5e8e74b97a244 ]
When running an mds diagnostic that passes frames with the switch, soft
lockups are detected. The driver is in a CQE processing loop and has
sufficient amount of traffic that it never exits the ring processing routine,
thus the "lockup".
Cap the number of elements in the work processing routine to 64 elements. This
ensures that the cpu will be given up and the handler reschedule to process
additional items.
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alexandre Belloni [Thu, 16 Aug 2018 07:39:41 +0000 (09:39 +0200)]
uio: ensure class is registered before devices
[ Upstream commit
ae61cf5b9913027c6953a79ed3894da4f47061bd ]
When both uio and the uio drivers are built in the kernel, it is possible
for a driver to register devices before the uio class is registered.
This may result in a NULL pointer dereference later on in
get_device_parent() when accessing the class glue_dirs spinlock.
The trace looks like that:
Unable to handle kernel NULL pointer dereference at virtual address
00000140
[...]
[<
ffff0000089cc234>] _raw_spin_lock+0x14/0x48
[<
ffff0000084f56bc>] device_add+0x154/0x6a0
[<
ffff0000084f5e48>] device_create_groups_vargs+0x120/0x128
[<
ffff0000084f5edc>] device_create+0x54/0x60
[<
ffff0000086e72c0>] __uio_register_device+0x120/0x4a8
[<
ffff000008528b7c>] jaguar2_pci_probe+0x2d4/0x558
[<
ffff0000083fc18c>] local_pci_probe+0x3c/0xb8
[<
ffff0000083fd81c>] pci_device_probe+0x11c/0x180
[<
ffff0000084f88bc>] driver_probe_device+0x22c/0x2d8
[<
ffff0000084f8a24>] __driver_attach+0xbc/0xc0
[<
ffff0000084f69fc>] bus_for_each_dev+0x4c/0x98
[<
ffff0000084f81b8>] driver_attach+0x20/0x28
[<
ffff0000084f7d08>] bus_add_driver+0x1b8/0x228
[<
ffff0000084f93c0>] driver_register+0x60/0xf8
[<
ffff0000083fb918>] __pci_register_driver+0x40/0x48
Return EPROBE_DEFER in that case so the driver can register the device
later.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Loic Poulain [Tue, 4 Sep 2018 15:18:57 +0000 (17:18 +0200)]
usb: chipidea: Prevent unbalanced IRQ disable
[ Upstream commit
8b97d73c4d72a2abf58f8e49062a7ee1e5f1334e ]
The ChipIdea IRQ is disabled before scheduling the otg work and
re-enabled on otg work completion. However if the job is already
scheduled we have to undo the effect of disable_irq int order to
balance the IRQ disable-depth value.
Fixes:
be6b0c1bd0be ("usb: chipidea: using one inline function to cover queue work operations")
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Theodore Ts'o [Tue, 2 Oct 2018 05:34:44 +0000 (01:34 -0400)]
ext4: fix argument checking in EXT4_IOC_MOVE_EXT
[ Upstream commit
f18b2b83a727a3db208308057d2c7945f368e625 ]
If the starting block number of either the source or destination file
exceeds the EOF, EXT4_IOC_MOVE_EXT should return EINVAL.
Also fixed the helper function mext_check_coverage() so that if the
logical block is beyond EOF, make it return immediately, instead of
looping until the block number wraps all the away around. This takes
long enough that if there are multiple threads trying to do pound on
an the same inode doing non-sensical things, it can end up triggering
the kernel's soft lockup detector.
Reported-by: syzbot+c61979f6f2cba5cb3c06@syzkaller.appspotmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Finn Thain [Tue, 16 Oct 2018 05:31:25 +0000 (16:31 +1100)]
scsi: esp_scsi: Track residual for PIO transfers
[ Upstream commit
fd47d919d0c336e7c22862b51ee94927ffea227a ]
If a target disconnects during a PIO data transfer the command may fail
when the target reconnects:
scsi host1: DMA length is zero!
scsi host1: cur adr[
04380000] len[
00000000]
The scsi bus is then reset. This happens because the residual reached
zero before the transfer was completed.
The usual residual calculation relies on the Transfer Count registers.
That works for DMA transfers but not for PIO transfers. Fix the problem
by storing the PIO transfer residual and using that to correctly
calculate bytes_sent.
Fixes:
6fe07aaffbf0 ("[SCSI] m68k: new mac_esp scsi driver")
Tested-by: Stan Johnson <userm57@yahoo.com>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Tested-by: Michael Schmitz <schmitzmic@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Martin Willi [Wed, 22 Aug 2018 07:39:52 +0000 (09:39 +0200)]
ath10k: schedule hardware restart if WMI command times out
[ Upstream commit
a9911937e7d332761e8c4fcbc7ba0426bdc3956f ]
When running in AP mode, ath10k sometimes suffers from TX credit
starvation. The issue is hard to reproduce and shows up once in a
few days, but has been repeatedly seen with QCA9882 and a large
range of firmwares, including 10.2.4.70.67.
Once the module is in this state, TX credits are never replenished,
which results in "SWBA overrun" errors, as no beacons can be sent.
Even worse, WMI commands run in a timeout while holding the conf
mutex for three seconds each, making any further operations slow
and the whole system unresponsive.
The firmware/driver never recovers from that state automatically,
and triggering TX flush or warm restarts won't work over WMI. So
issue a hardware restart if a WMI command times out due to missing
TX credits. This implies a connectivity outage of about 1.4s in AP
mode, but brings back the interface and the whole system to a usable
state. WMI command timeouts have not been seen in absent of this
specific issue, so taking such drastic actions seems legitimate.
Signed-off-by: Martin Willi <martin@strongswan.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Masami Hiramatsu [Tue, 11 Sep 2018 10:20:40 +0000 (19:20 +0900)]
kprobes: Return error if we fail to reuse kprobe instead of BUG_ON()
[ Upstream commit
819319fc93461c07b9cdb3064f154bd8cfd48172 ]
Make reuse_unused_kprobe() to return error code if
it fails to reuse unused kprobe for optprobe instead
of calling BUG_ON().
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Cc: David S . Miller <davem@davemloft.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Naveen N . Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/153666124040.21306.14150398706331307654.stgit@devbox
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ben Hutchings [Sun, 16 Sep 2018 15:22:47 +0000 (16:22 +0100)]
x86: boot: Fix EFI stub alignment
[ Upstream commit
9c1442a9d039a1a3302fa93e9a11001c5f23b624 ]
We currently align the end of the compressed image to a multiple of
16. However, the PE-COFF header included in the EFI stub says that
the file alignment is 32 bytes, and when adding an EFI signature to
the file it must first be padded to this alignment.
sbsigntool commands warn about this:
warning: file-aligned section .text extends beyond end of file
warning: checksum areas are greater than image size. Invalid section table?
Worse, pesign -at least when creating a detached signature- uses the
hash of the unpadded file, resulting in an invalid signature if
padding is required.
Avoid both these problems by increasing alignment to 32 bytes when
CONFIG_EFI_STUB is enabled.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Yu Zhao [Sun, 23 Sep 2018 20:39:24 +0000 (14:39 -0600)]
mmc: sdhci-pci-o2micro: Add quirk for O2 Micro dev 0x8620 rev 0x01
[ Upstream commit
5169894982bb67486d93cc1e10151712bb86bcb6 ]
This device reports SDHCI_CLOCK_INT_STABLE even though it's not
ready to take SDHCI_CLOCK_CARD_EN. The symptom is that reading
SDHCI_CLOCK_CONTROL after enabling the clock shows absence of the
bit from the register (e.g. expecting 0x0000fa07 = 0x0000fa03 |
SDHCI_CLOCK_CARD_EN but only observed the first operand).
mmc1: Timeout waiting for hardware cmd interrupt.
mmc1: sdhci: ============ SDHCI REGISTER DUMP ===========
mmc1: sdhci: Sys addr: 0x00000000 | Version: 0x00000603
mmc1: sdhci: Blk size: 0x00000000 | Blk cnt: 0x00000000
mmc1: sdhci: Argument: 0x00000000 | Trn mode: 0x00000000
mmc1: sdhci: Present: 0x01ff0001 | Host ctl: 0x00000001
mmc1: sdhci: Power: 0x0000000f | Blk gap: 0x00000000
mmc1: sdhci: Wake-up: 0x00000000 | Clock: 0x0000fa03
mmc1: sdhci: Timeout: 0x00000000 | Int stat: 0x00000000
mmc1: sdhci: Int enab: 0x00ff0083 | Sig enab: 0x00ff0083
mmc1: sdhci: AC12 err: 0x00000000 | Slot int: 0x00000000
mmc1: sdhci: Caps: 0x25fcc8bf | Caps_1: 0x00002077
mmc1: sdhci: Cmd: 0x00000000 | Max curr: 0x005800c8
mmc1: sdhci: Resp[0]: 0x00000000 | Resp[1]: 0x00000000
mmc1: sdhci: Resp[2]: 0x00000000 | Resp[3]: 0x00000000
mmc1: sdhci: Host ctl2: 0x00000008
mmc1: sdhci: ADMA Err: 0x00000000 | ADMA Ptr: 0x00000000
mmc1: sdhci: ============================================
The problem happens during wakeup from S3. Adding a delay quirk
after power up reliably fixes the problem.
Signed-off-by: Yu Zhao <yuzhao@google.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sanskriti Sharma [Tue, 2 Oct 2018 14:29:11 +0000 (10:29 -0400)]
perf tools: Cleanup trace-event-info 'tdata' leak
[ Upstream commit
faedbf3fd19f2511a39397f76359e4cc6ee93072 ]
Free tracing_data structure in tracing_data_get() error paths.
Fixes the following coverity complaint:
Error: RESOURCE_LEAK (CWE-772):
leaked_storage: Variable "tdata" going out of scope leaks the storage
Signed-off-by: Sanskriti Sharma <sansharm@redhat.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Joe Lawrence <joe.lawrence@redhat.com>
Link: http://lkml.kernel.org/r/1538490554-8161-3-git-send-email-sansharm@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sanskriti Sharma [Tue, 2 Oct 2018 14:29:14 +0000 (10:29 -0400)]
perf tools: Free temporary 'sys' string in read_event_files()
[ Upstream commit
1e44224fb0528b4c0cc176bde2bb31e9127eb14b ]
For each system in a given pevent, read_event_files() reads in a
temporary 'sys' string. Be sure to free this string before moving onto
to the next system and/or leaving read_event_files().
Fixes the following coverity complaints:
Error: RESOURCE_LEAK (CWE-772):
tools/perf/util/trace-event-read.c:343: overwrite_var: Overwriting
"sys" in "sys = read_string()" leaks the storage that "sys" points to.
tools/perf/util/trace-event-read.c:353: leaked_storage: Variable "sys"
going out of scope leaks the storage it points to.
Signed-off-by: Sanskriti Sharma <sansharm@redhat.com>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Cc: Joe Lawrence <joe.lawrence@redhat.com>
Link: http://lkml.kernel.org/r/1538490554-8161-6-git-send-email-sansharm@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Serhey Popovych [Tue, 9 Oct 2018 18:21:01 +0000 (21:21 +0300)]
tun: Consistently configure generic netdev params via rtnetlink
[ Upstream commit
df52eab23d703142c766ac00bdb8db19d71238d0 ]
Configuring generic network device parameters on tun will fail in
presence of IFLA_INFO_KIND attribute in IFLA_LINKINFO nested attribute
since tun_validate() always return failure.
This can be visualized with following ip-link(8) command sequences:
# ip link set dev tun0 group 100
# ip link set dev tun0 group 100 type tun
RTNETLINK answers: Invalid argument
with contrast to dummy and veth drivers:
# ip link set dev dummy0 group 100
# ip link set dev dummy0 type dummy
# ip link set dev veth0 group 100
# ip link set dev veth0 group 100 type veth
Fix by returning zero in tun_validate() when @data is NULL that is
always in case since rtnl_link_ops->maxtype is zero in tun driver.
Fixes:
f019a7a594d9 ("tun: Implement ip link del tunXXX")
Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Omar Sandoval [Thu, 11 Oct 2018 19:20:41 +0000 (12:20 -0700)]
swim: fix cleanup on setup error
[ Upstream commit
1448a2a5360ae06f25e2edc61ae070dff5c0beb4 ]
If we fail to allocate the request queue for a disk, we still need to
free that disk, not just the previous ones. Additionally, we need to
cleanup the previous request queues.
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Omar Sandoval [Thu, 11 Oct 2018 19:20:49 +0000 (12:20 -0700)]
ataflop: fix error handling during setup
[ Upstream commit
71327f547ee3a46ec5c39fdbbd268401b2578d0e ]
Move queue allocation next to disk allocation to fix a couple of issues:
- If add_disk() hasn't been called, we should clear disk->queue before
calling put_disk().
- If we fail to allocate a request queue, we still need to put all of
the disks, not just the ones that we allocated queues for.
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Waiman Long [Fri, 19 Oct 2018 01:45:17 +0000 (21:45 -0400)]
locking/lockdep: Fix debug_locks off performance problem
[ Upstream commit
9506a7425b094d2f1d9c877ed5a78f416669269b ]
It was found that when debug_locks was turned off because of a problem
found by the lockdep code, the system performance could drop quite
significantly when the lock_stat code was also configured into the
kernel. For instance, parallel kernel build time on a 4-socket x86-64
server nearly doubled.
Further analysis into the cause of the slowdown traced back to the
frequent call to debug_locks_off() from the __lock_acquired() function
probably due to some inconsistent lockdep states with debug_locks
off. The debug_locks_off() function did an unconditional atomic xchg
to write a 0 value into debug_locks which had already been set to 0.
This led to severe cacheline contention in the cacheline that held
debug_locks. As debug_locks is being referenced in quite a few different
places in the kernel, this greatly slow down the system performance.
To prevent that trashing of debug_locks cacheline, lock_acquired()
and lock_contended() now checks the state of debug_locks before
proceeding. The debug_locks_off() function is also modified to check
debug_locks before calling __debug_locks_off().
Signed-off-by: Waiman Long <longman@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Link: http://lkml.kernel.org/r/1539913518-15598-1-git-send-email-longman@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Masami Hiramatsu [Thu, 18 Oct 2018 13:13:02 +0000 (22:13 +0900)]
selftests: ftrace: Add synthetic event syntax testcase
[ Upstream commit
ba0e41ca81b935b958006c7120466e2217357827 ]
Add a testcase to check the syntax and field types for
synthetic_events interface.
Link: http://lkml.kernel.org/r/153986838264.18251.16627517536956299922.stgit@devbox
Acked-by: Shuah Khan <shuah@kernel.org>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nathan Chancellor [Sat, 13 Oct 2018 02:14:58 +0000 (19:14 -0700)]
net: qla3xxx: Remove overflowing shift statement
[ Upstream commit
8c3bf9b62b667456a57aefcf1689e826df146159 ]
Clang currently warns:
drivers/net/ethernet/qlogic/qla3xxx.c:384:24: warning: signed shift
result (0xF00000000) requires 37 bits to represent, but 'int' only has
32 bits [-Wshift-overflow]
((ISP_NVRAM_MASK << 16) | qdev->eeprom_cmd_data));
~~~~~~~~~~~~~~ ^ ~~
1 warning generated.
The warning is certainly accurate since ISP_NVRAM_MASK is defined as
(0x000F << 16) which is then shifted by 16, resulting in
64424509440,
well above UINT_MAX.
Given that this is the only location in this driver where ISP_NVRAM_MASK
is shifted again, it seems likely that ISP_NVRAM_MASK was originally
defined without a shift and during the move of the shift to the
definition, this statement wasn't properly removed (since ISP_NVRAM_MASK
is used in the statenent right above this). Only the maintainers can
confirm this since this statment has been here since the driver was
first added to the kernel.
Link: https://github.com/ClangBuiltLinux/linux/issues/127
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
David S. Miller [Fri, 12 Oct 2018 17:33:20 +0000 (10:33 -0700)]
sparc: Throttle perf events properly.
[ Upstream commit
455adb3174d2c8518cef1a61140c211f6ac224d2 ]
Like x86 and arm, call perf_sample_event_took() in perf event
NMI interrupt handler.
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
David S. Miller [Fri, 12 Oct 2018 17:31:58 +0000 (10:31 -0700)]
sparc: Fix single-pcr perf event counter management.
[ Upstream commit
cfdc3170d214046b9509183fe9b9544dc644d40b ]
It is important to clear the hw->state value for non-stopped events
when they are added into the PMU. Otherwise when the event is
scheduled out, we won't read the counter because HES_UPTODATE is still
set. This breaks 'perf stat' and similar use cases, causing all the
events to show zero.
This worked for multi-pcr because we make explicit sparc_pmu_start()
calls in calculate_multiple_pcrs(). calculate_single_pcr() doesn't do
this because the idea there is to accumulate all of the counter
settings into the single pcr value. So we have to add explicit
hw->state handling there.
Like x86, we use the PERF_HES_ARCH bit to track truly stopped events
so that we don't accidently start them on a reload.
Related to all of this, sparc_pmu_start() is missing a userpage update
so add it.
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
He Zhe [Tue, 14 Aug 2018 15:33:42 +0000 (23:33 +0800)]
x86/corruption-check: Fix panic in memory_corruption_check() when boot option without value is provided
commit
ccde460b9ae5c2bd5e4742af0a7f623c2daad566 upstream.
memory_corruption_check[{_period|_size}]()'s handlers do not check input
argument before passing it to kstrtoul() or simple_strtoull(). The argument
would be a NULL pointer if each of the kernel parameters, without its
value, is set in command line and thus cause the following panic.
PANIC: early exception 0xe3 IP 10:
ffffffff73587c22 error 0 cr2 0x0
[ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 4.18-rc8+ #2
[ 0.000000] RIP: 0010:kstrtoull+0x2/0x10
...
[ 0.000000] Call Trace
[ 0.000000] ? set_corruption_check+0x21/0x49
[ 0.000000] ? do_early_param+0x4d/0x82
[ 0.000000] ? parse_args+0x212/0x330
[ 0.000000] ? rdinit_setup+0x26/0x26
[ 0.000000] ? parse_early_options+0x20/0x23
[ 0.000000] ? rdinit_setup+0x26/0x26
[ 0.000000] ? parse_early_param+0x2d/0x39
[ 0.000000] ? setup_arch+0x2f7/0xbf4
[ 0.000000] ? start_kernel+0x5e/0x4c2
[ 0.000000] ? load_ucode_bsp+0x113/0x12f
[ 0.000000] ? secondary_startup_64+0xa5/0xb0
This patch adds checks to prevent the panic.
Signed-off-by: He Zhe <zhe.he@windriver.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: gregkh@linuxfoundation.org
Cc: kstewart@linuxfoundation.org
Cc: pombredanne@nexb.com
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/1534260823-87917-1-git-send-email-zhe.he@windriver.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alex Stanoev [Sun, 28 Oct 2018 16:55:12 +0000 (16:55 +0000)]
ALSA: ca0106: Disable IZD on SB0570 DAC to fix audio pops
commit
ac237c28d5ac1b241d58b1b7b4b9fa10efb22fb5 upstream.
The Creative Audigy SE (SB0570) card currently exhibits an audible pop
whenever playback is stopped or resumed, or during silent periods of an
audio stream. Initialise the IZD bit to the 0 to eliminate these pops.
The Infinite Zero Detection (IZD) feature on the DAC causes the output
to be shunted to Vcap after 2048 samples of silence. This discharges the
AC coupling capacitor through the output and causes the aforementioned
pop/click noise.
The behaviour of the IZD bit is described on page 15 of the WM8768GEDS
datasheet: "With IZD=1, applying MUTE for 1024 consecutive input samples
will cause all outputs to be connected directly to VCAP. This also
happens if 2048 consecutive zero input samples are applied to all 6
channels, and IZD=0. It will be removed as soon as any channel receives
a non-zero input". I believe the second sentence might be referring to
IZD=1 instead of IZD=0 given the observed behaviour of the card.
This change should make the DAC initialisation consistent with
Creative's Windows driver, as this popping persists when initialising
the card in Linux and soft rebooting into Windows, but is not present on
a cold boot to Windows.
Signed-off-by: Alex Stanoev <alex@astanoev.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>