review.tizen.org Git - platform/kernel/linux-starfive.git/log

selftests: tc-testing: fix tunnel_key failure if dst_port is unspecified

After commit 1c25324caf82 ("net/sched: act_tunnel_key: Don't dump dst port
if it wasn't set"), act_tunnel_key doesn't dump anymore the destination
port, unless it was explicitly configured. This caused systematic failures
in the following TDC test case:

7a88 - Add tunnel_key action with cookie parameter

Avoid matching zero values of TCA_TUNNEL_KEY_ENC_DST_PORT to let the test
pass again.

Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

selftests: tc-testing: drop test on missing tunnel key id

After merge of commit 80ef0f22ceda ("net/sched: act_tunnel_key: Allow
key-less tunnels"), act_tunnel_key does not reject anymore requests to
install 'set' rules where the key id is missing. Therefore, drop the
following TDC testcase:

ba4e - Add tunnel_key set action with missing mandatory id parameter

because it's going to become a systematic fail as soon as userspace
iproute2 will start supporting key-less tunnels.

Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: phy: marvell: Fix deadlock from wrong locking

m88e1318_set_wol() takes the lock as part of phy_select_page(). Don't
take the lock again with phy_read(), use the unlocked __phy_read().

Fixes: 424ca4c55121 ("net: phy: marvell: fix paged access races")
Reported-by: Åke Rehnman <ake.rehnman@gmail.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: phy: marvell: Errata for mv88e6390 internal PHYs

The VOD can be out of spec, unless some magic value is poked into an
undocumented register in an undocumented page.

Fixes: e4cf8a38fc0d ("net: phy: Marvell: Add mv88e6390 internal PHY")
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

IN_BADCLASS: fix macro to actually work

Commit 65cab850f0ee ("net: Allow class-e address assignment via ifconfig
ioctl") modified the IN_BADCLASS macro a bit, but unfortunatly one too
many '(' characters were added to the line, making any code that used
it, not build properly.

Also, the macro now compares an unsigned with a signed value, which
isn't ok, so fix that up by making both types match properly.

Reported-by: Christopher Ferris <cferris@google.com>
Fixes: 65cab850f0ee ("net: Allow class-e address assignment via ifconfig ioctl")
Cc: Dave Taht <dave.taht@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

tcp: allow MSG_ZEROCOPY transmission also in CLOSE_WAIT state

TCP transmission with MSG_ZEROCOPY fails if the peer closes its end of
the connection and so transitions this socket to CLOSE_WAIT state.

Transmission in close wait state is acceptable. Other similar tests in
the stack (e.g., in FastOpen) accept both states. Relax this test, too.

Link: https://www.mail-archive.com/netdev@vger.kernel.org/msg276886.html
Link: https://www.mail-archive.com/netdev@vger.kernel.org/msg227390.html
Fixes: f214f915e7db ("tcp: enable MSG_ZEROCOPY")
Reported-by: Marek Majkowski <marek@cloudflare.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
CC: Yuchung Cheng <ycheng@google.com>
CC: Neal Cardwell <ncardwell@google.com>
CC: Soheil Hassas Yeganeh <soheil@google.com>
CC: Alexey Kodanev <alexey.kodanev@oracle.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: phy: micrel: set soft_reset callback to genphy_soft_reset for KSZ9031

So far genphy_soft_reset was used automatically if the PHY driver
didn't implement the soft_reset callback. This changed with the
mentioned commit and broke KSZ9031. To fix this configure the
KSZ9031 PHY driver to use genphy_soft_reset.

Fixes: 6e2d85ec0559 ("net: phy: Stop with excessive soft reset")
Reported-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Tested-by: Tony Lindgren <tony@atomide.com>
Tested-by: Sekhar Nori <nsekhar@ti.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net/sched: act_tunnel_key: fix memory leak in case of action replace

running the following TDC test cases:

7afc - Replace tunnel_key set action with all parameters
364d - Replace tunnel_key set action with all parameters and cookie

it's possible to trigger kmemleak warnings like:

  unreferenced object 0xffff94797127ab40 (size 192):
  comm "tc", pid 3248, jiffies 4300565293 (age 1006.862s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 c0 93 f9 8a ff ff ff ff  ................
    41 84 ee 89 ff ff ff ff 00 00 00 00 00 00 00 00  A...............
  backtrace:
    [<000000001e85b61c>] tunnel_key_init+0x31d/0x820 [act_tunnel_key]
    [<000000007f3f6ee7>] tcf_action_init_1+0x384/0x4c0
    [<00000000e89e3ded>] tcf_action_init+0x12b/0x1a0
    [<00000000c1c8c0f8>] tcf_action_add+0x73/0x170
    [<0000000095a9fc28>] tc_ctl_action+0x122/0x160
    [<000000004bebeac5>] rtnetlink_rcv_msg+0x263/0x2d0
    [<000000009fd862dd>] netlink_rcv_skb+0x4a/0x110
    [<00000000b55199e7>] netlink_unicast+0x1a0/0x250
    [<000000004996cd21>] netlink_sendmsg+0x2c1/0x3c0
    [<000000004d6a94b4>] sock_sendmsg+0x36/0x40
    [<000000005d9f0208>] ___sys_sendmsg+0x280/0x2f0
    [<00000000dec19023>] __sys_sendmsg+0x5e/0xa0
    [<000000004b82ac81>] do_syscall_64+0x5b/0x180
    [<00000000a0f1209a>] entry_SYSCALL_64_after_hwframe+0x44/0xa9
    [<000000002926b2ab>] 0xffffffffffffffff

when the tunnel_key action is replaced, the kernel forgets to release the
dst metadata: ensure they are released by tunnel_key_init(), the same way
it's done in tunnel_key_release().

Fixes: d0f6dd8a914f4 ("net/sched: Introduce act_tunnel_key")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Revert "rxrpc: Allow failed client calls to be retried"

The changes introduced to allow rxrpc calls to be retried creates an issue
when it comes to refcounting afs_call structs.  The problem is that when
rxrpc_send_data() queues the last packet for an asynchronous call, the
following sequence can occur:

(1) The notify_end_tx callback is invoked which causes the state in the
     afs_call to be changed from AFS_CALL_CL_REQUESTING or
     AFS_CALL_SV_REPLYING.

(2) afs_deliver_to_call() can then process event notifications from rxrpc
     on the async_work queue.

(3) Delivery of events, such as an abort from the server, can cause the
     afs_call state to be changed to AFS_CALL_COMPLETE on async_work.

(4) For an asynchronous call, afs_process_async_call() notes that the call
     is complete and tried to clean up all the refs on async_work.

(5) rxrpc_send_data() might return the amount of data transferred
     (success) or an error - which could in turn reflect a local error or a
     received error.

Synchronising the clean up after rxrpc_kernel_send_data() returns an error
with the asynchronous cleanup is then tricky to get right.

Mostly revert commit c038a58ccfd6704d4d7d60ed3d6a0fca13cf13a4.  The two API
functions the original commit added aren't currently used.  This makes
rxrpc_kernel_send_data() always return successfully if it queued the data
it was given.

Note that this doesn't affect synchronous calls since their Rx notification
function merely pokes a wait queue and does not refcounting.  The
asynchronous call notification function *has* to do refcounting and pass a
ref over the work item to avoid the need to sync the workqueue in call
cleanup.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'tipc-uninit-values'

Ying Xue says:

====================
tipc: fix uninit-value issues reported by syzbot

Recently, syzbot complained that TIPC module exits several issues
associated with uninit-value type. So, in this series, we try to
fix them as many as possible.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

tipc: fix uninit-value in tipc_nl_compat_doit

BUG: KMSAN: uninit-value in tipc_nl_compat_doit+0x404/0xa10 net/tipc/netlink_compat.c:335
CPU: 0 PID: 4514 Comm: syz-executor485 Not tainted 4.16.0+ #87
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:17 [inline]
dump_stack+0x185/0x1d0 lib/dump_stack.c:53
kmsan_report+0x142/0x240 mm/kmsan/kmsan.c:1067
__msan_warning_32+0x6c/0xb0 mm/kmsan/kmsan_instr.c:683
tipc_nl_compat_doit+0x404/0xa10 net/tipc/netlink_compat.c:335
tipc_nl_compat_recv+0x164b/0x2700 net/tipc/netlink_compat.c:1153
genl_family_rcv_msg net/netlink/genetlink.c:599 [inline]
genl_rcv_msg+0x1686/0x1810 net/netlink/genetlink.c:624
netlink_rcv_skb+0x378/0x600 net/netlink/af_netlink.c:2447
genl_rcv+0x63/0x80 net/netlink/genetlink.c:635
netlink_unicast_kernel net/netlink/af_netlink.c:1311 [inline]
netlink_unicast+0x166b/0x1740 net/netlink/af_netlink.c:1337
netlink_sendmsg+0x1048/0x1310 net/netlink/af_netlink.c:1900
sock_sendmsg_nosec net/socket.c:630 [inline]
sock_sendmsg net/socket.c:640 [inline]
___sys_sendmsg+0xec0/0x1310 net/socket.c:2046
__sys_sendmsg net/socket.c:2080 [inline]
SYSC_sendmsg+0x2a3/0x3d0 net/socket.c:2091
SyS_sendmsg+0x54/0x80 net/socket.c:2087
do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287
entry_SYSCALL_64_after_hwframe+0x3d/0xa2
RIP: 0033:0x43fda9
RSP: 002b:00007ffd0c184ba8 EFLAGS: 00000213 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00000000004002c8 RCX: 000000000043fda9
RDX: 0000000000000000 RSI: 0000000020023000 RDI: 0000000000000003
RBP: 00000000006ca018 R08: 00000000004002c8 R09: 00000000004002c8
R10: 00000000004002c8 R11: 0000000000000213 R12: 00000000004016d0
R13: 0000000000401760 R14: 0000000000000000 R15: 0000000000000000

Uninit was created at:
kmsan_save_stack_with_flags mm/kmsan/kmsan.c:278 [inline]
kmsan_internal_poison_shadow+0xb8/0x1b0 mm/kmsan/kmsan.c:188
kmsan_kmalloc+0x94/0x100 mm/kmsan/kmsan.c:314
kmsan_slab_alloc+0x11/0x20 mm/kmsan/kmsan.c:321
slab_post_alloc_hook mm/slab.h:445 [inline]
slab_alloc_node mm/slub.c:2737 [inline]
__kmalloc_node_track_caller+0xaed/0x11c0 mm/slub.c:4369
__kmalloc_reserve net/core/skbuff.c:138 [inline]
__alloc_skb+0x2cf/0x9f0 net/core/skbuff.c:206
alloc_skb include/linux/skbuff.h:984 [inline]
netlink_alloc_large_skb net/netlink/af_netlink.c:1183 [inline]
netlink_sendmsg+0x9a6/0x1310 net/netlink/af_netlink.c:1875
sock_sendmsg_nosec net/socket.c:630 [inline]
sock_sendmsg net/socket.c:640 [inline]
___sys_sendmsg+0xec0/0x1310 net/socket.c:2046
__sys_sendmsg net/socket.c:2080 [inline]
SYSC_sendmsg+0x2a3/0x3d0 net/socket.c:2091
SyS_sendmsg+0x54/0x80 net/socket.c:2087
do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287
entry_SYSCALL_64_after_hwframe+0x3d/0xa2

In tipc_nl_compat_recv(), when the len variable returned by
nlmsg_attrlen() is 0, the message is still treated as a valid one,
which is obviously unresonable. When len is zero, it means the
message not only doesn't contain any valid TLV payload, but also
TLV header is not included. Under this stituation, tlv_type field
in TLV header is still accessed in tipc_nl_compat_dumpit() or
tipc_nl_compat_doit(), but the field space is obviously illegal.
Of course, it is not initialized.

Reported-by: syzbot+bca0dc46634781f08b38@syzkaller.appspotmail.com
Reported-by: syzbot+6bdb590321a7ae40c1a6@syzkaller.appspotmail.com
Signed-off-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

tipc: fix uninit-value in tipc_nl_compat_name_table_dump

syzbot reported:

BUG: KMSAN: uninit-value in __arch_swab32 arch/x86/include/uapi/asm/swab.h:10 [inline]
BUG: KMSAN: uninit-value in __fswab32 include/uapi/linux/swab.h:59 [inline]
BUG: KMSAN: uninit-value in tipc_nl_compat_name_table_dump+0x4a8/0xba0 net/tipc/netlink_compat.c:826
CPU: 0 PID: 6290 Comm: syz-executor848 Not tainted 4.19.0-rc8+ #70
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x306/0x460 lib/dump_stack.c:113
kmsan_report+0x1a2/0x2e0 mm/kmsan/kmsan.c:917
__msan_warning+0x7c/0xe0 mm/kmsan/kmsan_instr.c:500
__arch_swab32 arch/x86/include/uapi/asm/swab.h:10 [inline]
__fswab32 include/uapi/linux/swab.h:59 [inline]
tipc_nl_compat_name_table_dump+0x4a8/0xba0 net/tipc/netlink_compat.c:826
__tipc_nl_compat_dumpit+0x59e/0xdb0 net/tipc/netlink_compat.c:205
tipc_nl_compat_dumpit+0x63a/0x820 net/tipc/netlink_compat.c:270
tipc_nl_compat_handle net/tipc/netlink_compat.c:1151 [inline]
tipc_nl_compat_recv+0x1402/0x2760 net/tipc/netlink_compat.c:1210
genl_family_rcv_msg net/netlink/genetlink.c:601 [inline]
genl_rcv_msg+0x185c/0x1a20 net/netlink/genetlink.c:626
netlink_rcv_skb+0x394/0x640 net/netlink/af_netlink.c:2454
genl_rcv+0x63/0x80 net/netlink/genetlink.c:637
netlink_unicast_kernel net/netlink/af_netlink.c:1317 [inline]
netlink_unicast+0x166d/0x1720 net/netlink/af_netlink.c:1343
netlink_sendmsg+0x1391/0x1420 net/netlink/af_netlink.c:1908
sock_sendmsg_nosec net/socket.c:621 [inline]
sock_sendmsg net/socket.c:631 [inline]
___sys_sendmsg+0xe47/0x1200 net/socket.c:2116
__sys_sendmsg net/socket.c:2154 [inline]
__do_sys_sendmsg net/socket.c:2163 [inline]
__se_sys_sendmsg+0x307/0x460 net/socket.c:2161
__x64_sys_sendmsg+0x4a/0x70 net/socket.c:2161
do_syscall_64+0xbe/0x100 arch/x86/entry/common.c:291
entry_SYSCALL_64_after_hwframe+0x63/0xe7
RIP: 0033:0x440179
Code: 18 89 d0 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 fb 13 fc ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007ffecec49318 EFLAGS: 00000213 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00000000004002c8 RCX: 0000000000440179
RDX: 0000000000000000 RSI: 0000000020000100 RDI: 0000000000000003
RBP: 00000000006ca018 R08: 0000000000000000 R09: 00000000004002c8
R10: 0000000000000000 R11: 0000000000000213 R12: 0000000000401a00
R13: 0000000000401a90 R14: 0000000000000000 R15: 0000000000000000

Uninit was created at:
kmsan_save_stack_with_flags mm/kmsan/kmsan.c:255 [inline]
kmsan_internal_poison_shadow+0xc8/0x1d0 mm/kmsan/kmsan.c:180
kmsan_kmalloc+0xa4/0x120 mm/kmsan/kmsan_hooks.c:104
kmsan_slab_alloc+0x10/0x20 mm/kmsan/kmsan_hooks.c:113
slab_post_alloc_hook mm/slab.h:446 [inline]
slab_alloc_node mm/slub.c:2727 [inline]
__kmalloc_node_track_caller+0xb43/0x1400 mm/slub.c:4360
__kmalloc_reserve net/core/skbuff.c:138 [inline]
__alloc_skb+0x422/0xe90 net/core/skbuff.c:206
alloc_skb include/linux/skbuff.h:996 [inline]
netlink_alloc_large_skb net/netlink/af_netlink.c:1189 [inline]
netlink_sendmsg+0xcaf/0x1420 net/netlink/af_netlink.c:1883
sock_sendmsg_nosec net/socket.c:621 [inline]
sock_sendmsg net/socket.c:631 [inline]
___sys_sendmsg+0xe47/0x1200 net/socket.c:2116
__sys_sendmsg net/socket.c:2154 [inline]
__do_sys_sendmsg net/socket.c:2163 [inline]
__se_sys_sendmsg+0x307/0x460 net/socket.c:2161
__x64_sys_sendmsg+0x4a/0x70 net/socket.c:2161
do_syscall_64+0xbe/0x100 arch/x86/entry/common.c:291
entry_SYSCALL_64_after_hwframe+0x63/0xe7

We cannot take for granted the thing that the length of data contained
in TLV is longer than the size of struct tipc_name_table_query in
tipc_nl_compat_name_table_dump().

Reported-by: syzbot+06e771a754829716a327@syzkaller.appspotmail.com
Signed-off-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

tipc: fix uninit-value in tipc_nl_compat_link_set

syzbot reports following splat:

BUG: KMSAN: uninit-value in strlen+0x3b/0xa0 lib/string.c:486
CPU: 1 PID: 9306 Comm: syz-executor172 Not tainted 4.20.0-rc7+ #2
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 01/01/2011
Call Trace:
  __dump_stack lib/dump_stack.c:77 [inline]
  dump_stack+0x173/0x1d0 lib/dump_stack.c:113
  kmsan_report+0x12e/0x2a0 mm/kmsan/kmsan.c:613
  __msan_warning+0x82/0xf0 mm/kmsan/kmsan_instr.c:313
  strlen+0x3b/0xa0 lib/string.c:486
  nla_put_string include/net/netlink.h:1154 [inline]
  __tipc_nl_compat_link_set net/tipc/netlink_compat.c:708 [inline]
  tipc_nl_compat_link_set+0x929/0x1220 net/tipc/netlink_compat.c:744
  __tipc_nl_compat_doit net/tipc/netlink_compat.c:311 [inline]
  tipc_nl_compat_doit+0x3aa/0xaf0 net/tipc/netlink_compat.c:344
  tipc_nl_compat_handle net/tipc/netlink_compat.c:1107 [inline]
  tipc_nl_compat_recv+0x14d7/0x2760 net/tipc/netlink_compat.c:1210
  genl_family_rcv_msg net/netlink/genetlink.c:601 [inline]
  genl_rcv_msg+0x185f/0x1a60 net/netlink/genetlink.c:626
  netlink_rcv_skb+0x444/0x640 net/netlink/af_netlink.c:2477
  genl_rcv+0x63/0x80 net/netlink/genetlink.c:637
  netlink_unicast_kernel net/netlink/af_netlink.c:1310 [inline]
  netlink_unicast+0xf40/0x1020 net/netlink/af_netlink.c:1336
  netlink_sendmsg+0x127f/0x1300 net/netlink/af_netlink.c:1917
  sock_sendmsg_nosec net/socket.c:621 [inline]
  sock_sendmsg net/socket.c:631 [inline]
  ___sys_sendmsg+0xdb9/0x11b0 net/socket.c:2116
  __sys_sendmsg net/socket.c:2154 [inline]
  __do_sys_sendmsg net/socket.c:2163 [inline]
  __se_sys_sendmsg+0x305/0x460 net/socket.c:2161
  __x64_sys_sendmsg+0x4a/0x70 net/socket.c:2161
  do_syscall_64+0xbc/0xf0 arch/x86/entry/common.c:291
  entry_SYSCALL_64_after_hwframe+0x63/0xe7

The uninitialised access happened in
    nla_put_string(skb, TIPC_NLA_LINK_NAME, lc->name)

This is because lc->name string is not validated before it's used.

Reported-by: syzbot+d78b8a29241a195aefb8@syzkaller.appspotmail.com
Signed-off-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

tipc: fix uninit-value in tipc_nl_compat_bearer_enable

syzbot reported:

BUG: KMSAN: uninit-value in strlen+0x3b/0xa0 lib/string.c:484
CPU: 1 PID: 6371 Comm: syz-executor652 Not tainted 4.19.0-rc8+ #70
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x306/0x460 lib/dump_stack.c:113
kmsan_report+0x1a2/0x2e0 mm/kmsan/kmsan.c:917
__msan_warning+0x7c/0xe0 mm/kmsan/kmsan_instr.c:500
strlen+0x3b/0xa0 lib/string.c:484
nla_put_string include/net/netlink.h:1011 [inline]
tipc_nl_compat_bearer_enable+0x238/0x7b0 net/tipc/netlink_compat.c:389
__tipc_nl_compat_doit net/tipc/netlink_compat.c:311 [inline]
tipc_nl_compat_doit+0x39f/0xae0 net/tipc/netlink_compat.c:344
tipc_nl_compat_recv+0x147c/0x2760 net/tipc/netlink_compat.c:1107
genl_family_rcv_msg net/netlink/genetlink.c:601 [inline]
genl_rcv_msg+0x185c/0x1a20 net/netlink/genetlink.c:626
netlink_rcv_skb+0x394/0x640 net/netlink/af_netlink.c:2454
genl_rcv+0x63/0x80 net/netlink/genetlink.c:637
netlink_unicast_kernel net/netlink/af_netlink.c:1317 [inline]
netlink_unicast+0x166d/0x1720 net/netlink/af_netlink.c:1343
netlink_sendmsg+0x1391/0x1420 net/netlink/af_netlink.c:1908
sock_sendmsg_nosec net/socket.c:621 [inline]
sock_sendmsg net/socket.c:631 [inline]
___sys_sendmsg+0xe47/0x1200 net/socket.c:2116
__sys_sendmsg net/socket.c:2154 [inline]
__do_sys_sendmsg net/socket.c:2163 [inline]
__se_sys_sendmsg+0x307/0x460 net/socket.c:2161
__x64_sys_sendmsg+0x4a/0x70 net/socket.c:2161
do_syscall_64+0xbe/0x100 arch/x86/entry/common.c:291
entry_SYSCALL_64_after_hwframe+0x63/0xe7
RIP: 0033:0x440179
Code: 18 89 d0 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 fb 13 fc ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007fffef7beee8 EFLAGS: 00000213 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00000000004002c8 RCX: 0000000000440179
RDX: 0000000000000000 RSI: 0000000020000100 RDI: 0000000000000003
RBP: 00000000006ca018 R08: 0000000000000000 R09: 00000000004002c8
R10: 0000000000000000 R11: 0000000000000213 R12: 0000000000401a00
R13: 0000000000401a90 R14: 0000000000000000 R15: 0000000000000000

Uninit was created at:
kmsan_save_stack_with_flags mm/kmsan/kmsan.c:255 [inline]
kmsan_internal_poison_shadow+0xc8/0x1d0 mm/kmsan/kmsan.c:180
kmsan_kmalloc+0xa4/0x120 mm/kmsan/kmsan_hooks.c:104
kmsan_slab_alloc+0x10/0x20 mm/kmsan/kmsan_hooks.c:113
slab_post_alloc_hook mm/slab.h:446 [inline]
slab_alloc_node mm/slub.c:2727 [inline]
__kmalloc_node_track_caller+0xb43/0x1400 mm/slub.c:4360
__kmalloc_reserve net/core/skbuff.c:138 [inline]
__alloc_skb+0x422/0xe90 net/core/skbuff.c:206
alloc_skb include/linux/skbuff.h:996 [inline]
netlink_alloc_large_skb net/netlink/af_netlink.c:1189 [inline]
netlink_sendmsg+0xcaf/0x1420 net/netlink/af_netlink.c:1883
sock_sendmsg_nosec net/socket.c:621 [inline]
sock_sendmsg net/socket.c:631 [inline]
___sys_sendmsg+0xe47/0x1200 net/socket.c:2116
__sys_sendmsg net/socket.c:2154 [inline]
__do_sys_sendmsg net/socket.c:2163 [inline]
__se_sys_sendmsg+0x307/0x460 net/socket.c:2161
__x64_sys_sendmsg+0x4a/0x70 net/socket.c:2161
do_syscall_64+0xbe/0x100 arch/x86/entry/common.c:291
entry_SYSCALL_64_after_hwframe+0x63/0xe7

The root cause is that we don't validate whether bear name is a valid
string in tipc_nl_compat_bearer_enable().

Meanwhile, we also fix the same issue in the following functions:
tipc_nl_compat_bearer_disable()
tipc_nl_compat_link_stat_dump()
tipc_nl_compat_media_set()
tipc_nl_compat_bearer_set()

Reported-by: syzbot+b33d5cae0efd35dbfe77@syzkaller.appspotmail.com
Signed-off-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

tipc: fix uninit-value in tipc_nl_compat_link_reset_stats

syzbot reports following splat:

BUG: KMSAN: uninit-value in strlen+0x3b/0xa0 lib/string.c:486
CPU: 1 PID: 11057 Comm: syz-executor0 Not tainted 4.20.0-rc7+ #2
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x173/0x1d0 lib/dump_stack.c:113
kmsan_report+0x12e/0x2a0 mm/kmsan/kmsan.c:613
__msan_warning+0x82/0xf0 mm/kmsan/kmsan_instr.c:295
strlen+0x3b/0xa0 lib/string.c:486
nla_put_string include/net/netlink.h:1154 [inline]
tipc_nl_compat_link_reset_stats+0x1f0/0x360 net/tipc/netlink_compat.c:760
__tipc_nl_compat_doit net/tipc/netlink_compat.c:311 [inline]
tipc_nl_compat_doit+0x3aa/0xaf0 net/tipc/netlink_compat.c:344
tipc_nl_compat_handle net/tipc/netlink_compat.c:1107 [inline]
tipc_nl_compat_recv+0x14d7/0x2760 net/tipc/netlink_compat.c:1210
genl_family_rcv_msg net/netlink/genetlink.c:601 [inline]
genl_rcv_msg+0x185f/0x1a60 net/netlink/genetlink.c:626
netlink_rcv_skb+0x444/0x640 net/netlink/af_netlink.c:2477
genl_rcv+0x63/0x80 net/netlink/genetlink.c:637
netlink_unicast_kernel net/netlink/af_netlink.c:1310 [inline]
netlink_unicast+0xf40/0x1020 net/netlink/af_netlink.c:1336
netlink_sendmsg+0x127f/0x1300 net/netlink/af_netlink.c:1917
sock_sendmsg_nosec net/socket.c:621 [inline]
sock_sendmsg net/socket.c:631 [inline]
___sys_sendmsg+0xdb9/0x11b0 net/socket.c:2116
__sys_sendmsg net/socket.c:2154 [inline]
__do_sys_sendmsg net/socket.c:2163 [inline]
__se_sys_sendmsg+0x305/0x460 net/socket.c:2161
__x64_sys_sendmsg+0x4a/0x70 net/socket.c:2161
do_syscall_64+0xbc/0xf0 arch/x86/entry/common.c:291
entry_SYSCALL_64_after_hwframe+0x63/0xe7
RIP: 0033:0x457ec9
Code: 6d b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 3b b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007f2557338c78 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000457ec9
RDX: 0000000000000000 RSI: 00000000200001c0 RDI: 0000000000000003
RBP: 000000000073bf00 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00007f25573396d4
R13: 00000000004cb478 R14: 00000000004d86c8 R15: 00000000ffffffff

Uninit was created at:
kmsan_save_stack_with_flags mm/kmsan/kmsan.c:204 [inline]
kmsan_internal_poison_shadow+0x92/0x150 mm/kmsan/kmsan.c:158
kmsan_kmalloc+0xa6/0x130 mm/kmsan/kmsan_hooks.c:176
kmsan_slab_alloc+0xe/0x10 mm/kmsan/kmsan_hooks.c:185
slab_post_alloc_hook mm/slab.h:446 [inline]
slab_alloc_node mm/slub.c:2759 [inline]
__kmalloc_node_track_caller+0xe18/0x1030 mm/slub.c:4383
__kmalloc_reserve net/core/skbuff.c:137 [inline]
__alloc_skb+0x309/0xa20 net/core/skbuff.c:205
alloc_skb include/linux/skbuff.h:998 [inline]
netlink_alloc_large_skb net/netlink/af_netlink.c:1182 [inline]
netlink_sendmsg+0xb82/0x1300 net/netlink/af_netlink.c:1892
sock_sendmsg_nosec net/socket.c:621 [inline]
sock_sendmsg net/socket.c:631 [inline]
___sys_sendmsg+0xdb9/0x11b0 net/socket.c:2116
__sys_sendmsg net/socket.c:2154 [inline]
__do_sys_sendmsg net/socket.c:2163 [inline]
__se_sys_sendmsg+0x305/0x460 net/socket.c:2161
__x64_sys_sendmsg+0x4a/0x70 net/socket.c:2161
do_syscall_64+0xbc/0xf0 arch/x86/entry/common.c:291
entry_SYSCALL_64_after_hwframe+0x63/0xe7

The uninitialised access happened in tipc_nl_compat_link_reset_stats:
nla_put_string(skb, TIPC_NLA_LINK_NAME, name)

This is because name string is not validated before it's used.

Reported-by: syzbot+e01d94b5a4c266be6e4c@syzkaller.appspotmail.com
Signed-off-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

tipc: fix uninit-value in in tipc_conn_rcv_sub

syzbot reported:

BUG: KMSAN: uninit-value in tipc_conn_rcv_sub+0x184/0x950 net/tipc/topsrv.c:373
CPU: 0 PID: 66 Comm: kworker/u4:4 Not tainted 4.17.0-rc3+ #88
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Workqueue: tipc_rcv tipc_conn_recv_work
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x185/0x1d0 lib/dump_stack.c:113
kmsan_report+0x142/0x240 mm/kmsan/kmsan.c:1067
__msan_warning_32+0x6c/0xb0 mm/kmsan/kmsan_instr.c:683
tipc_conn_rcv_sub+0x184/0x950 net/tipc/topsrv.c:373
tipc_conn_rcv_from_sock net/tipc/topsrv.c:409 [inline]
tipc_conn_recv_work+0x3cd/0x560 net/tipc/topsrv.c:424
process_one_work+0x12c6/0x1f60 kernel/workqueue.c:2145
worker_thread+0x113c/0x24f0 kernel/workqueue.c:2279
kthread+0x539/0x720 kernel/kthread.c:239
ret_from_fork+0x35/0x40 arch/x86/entry/entry_64.S:412

Local variable description: ----s.i@tipc_conn_recv_work
Variable was created at:
tipc_conn_recv_work+0x65/0x560 net/tipc/topsrv.c:419
process_one_work+0x12c6/0x1f60 kernel/workqueue.c:2145

In tipc_conn_rcv_from_sock(), it always supposes the length of message
received from sock_recvmsg() is not smaller than the size of struct
tipc_subscr. However, this assumption is false. Especially when the
length of received message is shorter than struct tipc_subscr size,
we will end up touching uninitialized fields in tipc_conn_rcv_sub().

Reported-by: syzbot+8951a3065ee7fd6d6e23@syzkaller.appspotmail.com
Reported-by: syzbot+75e6e042c5bbf691fc82@syzkaller.appspotmail.com
Signed-off-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'sch_cake-leaf-qdisc-fixes'

Toke Høiland-Jørgensen says:

====================
sched: Fix qdisc interactions exposed by using sch_cake as a leaf qdisc

This series fixes a couple of issues exposed by running sch_cake as a
leaf qdisc in an HFSC tree, which were discovered and reported by Pete
Heist. The interaction between CAKE's GSO splitting and the parent
qdisc's notion of its own queue length could cause queue stalls. While
investigating the report, I also noticed that several qdiscs would
dereference the skb pointer after dequeue, which is potentially
problematic since the GSO splitting code also frees the original skb.

See the individual patches in the series for details.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

sch_cake: Correctly update parent qlen when splitting GSO packets

To ensure parent qdiscs have the same notion of the number of enqueued
packets even after splitting a GSO packet, update the qdisc tree with the
number of packets that was added due to the split.

Reported-by: Pete Heist <pete@heistp.net>
Tested-by: Pete Heist <pete@heistp.net>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sched: Fix detection of empty queues in child qdiscs

Several qdiscs check on enqueue whether the packet was enqueued to a class
with an empty queue, in which case the class is activated. This is done by
checking if the qlen is exactly 1 after enqueue. However, if GSO splitting
is enabled in the child qdisc, a single packet can result in a qlen longer
than 1. This means the activation check fails, leading to a stalled queue.

Fix this by checking if the queue is empty *before* enqueue, and running
the activation logic if this was the case.

Reported-by: Pete Heist <pete@heistp.net>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sched: Avoid dereferencing skb pointer after child enqueue

Parent qdiscs may dereference the pointer to the enqueued skb after
enqueue. However, both CAKE and TBF call consume_skb() on the original skb
when splitting GSO packets, leading to a potential use-after-free in the
parent. Fix this by avoiding dereferencing the skb pointer after enqueueing
to the child.

Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ip6_gre: update version related info when changing link

We forgot to update ip6erspan version related info when changing link,
which will cause setting new hwid failed.

Reported-by: Jianlin Shi <jishi@redhat.com>
Fixes: 94d7d8f292870 ("ip6_gre: add erspan v2 support")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: phy: fix too strict check in phy_start_aneg

When adding checks to detect wrong usage of the phylib API we added
a check to phy_start_aneg() which is too strict. If the phylib
state machine is in state PHY_HALTED we should allow reconfiguring
and restarting aneg, and just don't touch the state.

Fixes: 2b3e88ea6528 ("net: phy: improve phy state checking")
Reported-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Tested-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Revert "igb: reduce CPU0 latency when updating statistics"

This reverts commit 59361316afcb08569af21e1af83e89c7051c055a.

Due to problems found in additional testing, this causes an illegal
context switch in the RCU read-side critical section.

CC: Dave Jones <davej@codemonkey.org.uk>
CC: Cong Wang <xiyou.wangcong@gmail.com>
CC: Jan Jablonsky <jan.jablonsky@thalesgroup.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

selftests/txtimestamp: Fix an equals vs assign bug

This should be == instead of =.

Fixes: b52354aa068e ("selftests: expand txtimestamp with ipv6 dgram + raw and pf_packet")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ipv4: Fix memory leak in network namespace dismantle

IPv4 routing tables are flushed in two cases:

1. In response to events in the netdev and inetaddr notification chains
2. When a network namespace is being dismantled

In both cases only routes associated with a dead nexthop group are
flushed. However, a nexthop group will only be marked as dead in case it
is populated with actual nexthops using a nexthop device. This is not
the case when the route in question is an error route (e.g.,
'blackhole', 'unreachable').

Therefore, when a network namespace is being dismantled such routes are
not flushed and leaked [1].

To reproduce:
# ip netns add blue
# ip -n blue route add unreachable 192.0.2.0/24
# ip netns del blue

Fix this by not skipping error routes that are not marked with
RTNH_F_DEAD when flushing the routing tables.

To prevent the flushing of such routes in case #1, add a parameter to
fib_table_flush() that indicates if the table is flushed as part of
namespace dismantle or not.

Note that this problem does not exist in IPv6 since error routes are
associated with the loopback device.

[1]
unreferenced object 0xffff888066650338 (size 56):
  comm "ip", pid 1206, jiffies 4294786063 (age 26.235s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 b0 1c 62 61 80 88 ff ff  ..........ba....
    e8 8b a1 64 80 88 ff ff 00 07 00 08 fe 00 00 00  ...d............
  backtrace:
    [<00000000856ed27d>] inet_rtm_newroute+0x129/0x220
    [<00000000fcdfc00a>] rtnetlink_rcv_msg+0x397/0xa20
    [<00000000cb85801a>] netlink_rcv_skb+0x132/0x380
    [<00000000ebc991d2>] netlink_unicast+0x4c0/0x690
    [<0000000014f62875>] netlink_sendmsg+0x929/0xe10
    [<00000000bac9d967>] sock_sendmsg+0xc8/0x110
    [<00000000223e6485>] ___sys_sendmsg+0x77a/0x8f0
    [<000000002e94f880>] __sys_sendmsg+0xf7/0x250
    [<00000000ccb1fa72>] do_syscall_64+0x14d/0x610
    [<00000000ffbe3dae>] entry_SYSCALL_64_after_hwframe+0x49/0xbe
    [<000000003a8b605b>] 0xffffffffffffffff
unreferenced object 0xffff888061621c88 (size 48):
  comm "ip", pid 1206, jiffies 4294786063 (age 26.235s)
  hex dump (first 32 bytes):
    6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b  kkkkkkkkkkkkkkkk
    6b 6b 6b 6b 6b 6b 6b 6b d8 8e 26 5f 80 88 ff ff  kkkkkkkk..&_....
  backtrace:
    [<00000000733609e3>] fib_table_insert+0x978/0x1500
    [<00000000856ed27d>] inet_rtm_newroute+0x129/0x220
    [<00000000fcdfc00a>] rtnetlink_rcv_msg+0x397/0xa20
    [<00000000cb85801a>] netlink_rcv_skb+0x132/0x380
    [<00000000ebc991d2>] netlink_unicast+0x4c0/0x690
    [<0000000014f62875>] netlink_sendmsg+0x929/0xe10
    [<00000000bac9d967>] sock_sendmsg+0xc8/0x110
    [<00000000223e6485>] ___sys_sendmsg+0x77a/0x8f0
    [<000000002e94f880>] __sys_sendmsg+0xf7/0x250
    [<00000000ccb1fa72>] do_syscall_64+0x14d/0x610
    [<00000000ffbe3dae>] entry_SYSCALL_64_after_hwframe+0x49/0xbe
    [<000000003a8b605b>] 0xffffffffffffffff

Fixes: 8cced9eff1d4 ("[NETNS]: Enable routing configuration in non-initial namespace.")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ip6_gre: fix tunnel list corruption for x-netns

In changelink ops, the ip6gre_net pointer is retrieved from
dev_net(dev), which is wrong in case of x-netns. Thus, the tunnel is not
unlinked from its current list and is relinked into another net
namespace. This corrupts the tunnel lists and can later trigger a kernel
oops.

Fix this by retrieving the netns from device private area.

Fixes: c8632fc30bb0 ("net: ip6_gre: Split up ip6gre_changelink()")
Cc: Petr Machata <petrm@mellanox.com>
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge git://git./pub/scm/linux/kernel/git/pablo/nf

Pablo Neira Ayuso says:

====================
Netfilter fixes for net

This is the first batch of Netfilter fixes for your net tree:

1) Fix endless loop in nf_tables rules netlink dump, from Phil Sutter.

2) Reference counter leak in object from the error path, from Taehee Yoo.

3) Selective rule dump requires table and chain.

4) Fix DNAT with nft_flow_offload reverse route lookup, from wenxu.

5) Use GFP_KERNEL_ACCOUNT in vmalloc allocation from ebtables, from
   Shakeel Butt.

6) Set ifindex from route to fix interaction with VRF slave device,
   also from wenxu.

7) Use nfct_help() to check for conntrack helper, IPS_HELPER status
   flag is only set from explicit helpers via -j CT, from Henry Yen.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'trace-v5.0-rc1' of git://git./linux/kernel/git/rostedt/linux-trace

Pull tracing fix from Steven Rostedt:
"Andrea Righi fixed a NULL pointer dereference in trace_kprobe_create()

  It is possible to trigger a NULL pointer dereference by writing an
  incorrectly formatted string to the krpobe_events file"

* tag 'trace-v5.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  tracing/kprobes: Fix NULL pointer dereference in trace_kprobe_create()

Merge git://git./linux/kernel/git/davem/net

Pull networking fixes from David Miller:

1) Fix regression in multi-SKB responses to RTM_GETADDR, from Arthur
    Gautier.

2) Fix ipv6 frag parsing in openvswitch, from Yi-Hung Wei.

3) Unbounded recursion in ipv4 and ipv6 GUE tunnels, from Stefano
    Brivio.

4) Use after free in hns driver, from Yonglong Liu.

5) icmp6_send() needs to handle the case of NULL skb, from Eric
    Dumazet.

6) Missing rcu read lock in __inet6_bind() when operating on mapped
    addresses, from David Ahern.

7) Memory leak in tipc-nl_compat_publ_dump(), from Gustavo A. R. Silva.

8) Fix PHY vs r8169 module loading ordering issues, from Heiner
    Kallweit.

9) Fix bridge vlan memory leak, from Ido Schimmel.

10) Dev refcount leak in AF_PACKET, from Jason Gunthorpe.

11) Infoleak in ipv6_local_error(), flow label isn't completely
    initialized. From Eric Dumazet.

12) Handle mv88e6390 errata, from Andrew Lunn.

13) Making vhost/vsock CID hashing consistent, from Zha Bin.

14) Fix lack of UMH cleanup when it unexpectedly exits, from Taehee Yoo.

15) Bridge forwarding must clear skb->tstamp, from Paolo Abeni.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (87 commits)
  bnxt_en: Fix context memory allocation.
  bnxt_en: Fix ring checking logic on 57500 chips.
  mISDN: hfcsusb: Use struct_size() in kzalloc()
  net: clear skb->tstamp in bridge forwarding path
  net: bpfilter: disallow to remove bpfilter module while being used
  net: bpfilter: restart bpfilter_umh when error occurred
  net: bpfilter: use cleanup callback to release umh_info
  umh: add exit routine for UMH process
  isdn: i4l: isdn_tty: Fix some concurrency double-free bugs
  vhost/vsock: fix vhost vsock cid hashing inconsistent
  net: stmmac: Prevent RX starvation in stmmac_napi_poll()
  net: stmmac: Fix the logic of checking if RX Watchdog must be enabled
  net: stmmac: Check if CBS is supported before configuring
  net: stmmac: dwxgmac2: Only clear interrupts that are active
  net: stmmac: Fix PCI module removal leak
  tools/bpf: fix bpftool map dump with bitfields
  tools/bpf: test btf bitfield with >=256 struct member offset
  bpf: fix bpffs bitfield pretty print
  net: ethernet: mediatek: fix warning in phy_start_aneg
  tcp: change txhash on SYN-data timeout
  ...

tracing/kprobes: Fix NULL pointer dereference in trace_kprobe_create()

It is possible to trigger a NULL pointer dereference by writing an
incorrectly formatted string to krpobe_events (trying to create a
kretprobe omitting the symbol).

Example:

echo "r:event_1 " >> /sys/kernel/debug/tracing/kprobe_events

That triggers this:

BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
#PF error: [normal kernel read fault]
PGD 0 P4D 0
Oops: 0000 [#1] SMP PTI
CPU: 6 PID: 1757 Comm: bash Not tainted 5.0.0-rc1+ #125
Hardware name: Dell Inc. XPS 13 9370/0F6P3V, BIOS 1.5.1 08/09/2018
RIP: 0010:kstrtoull+0x2/0x20
Code: 28 00 00 00 75 17 48 83 c4 18 5b 41 5c 5d c3 b8 ea ff ff ff eb e1 b8 de ff ff ff eb da e8 d6 36 bb ff 66 0f 1f 44 00 00 31 c0 <80> 3f 2b 55 48 89 e5 0f 94 c0 48 01 c7 e8 5c ff ff ff 5d c3 66 2e
RSP: 0018:ffffb5d482e57cb8 EFLAGS: 00010246
RAX: 0000000000000000 RBX: 0000000000000001 RCX: ffffffff82b12720
RDX: ffffb5d482e57cf8 RSI: 0000000000000000 RDI: 0000000000000000
RBP: ffffb5d482e57d70 R08: ffffa0c05e5a7080 R09: ffffa0c05e003980
R10: 0000000000000000 R11: 0000000040000000 R12: ffffa0c04fe87b08
R13: 0000000000000001 R14: 000000000000000b R15: ffffa0c058d749e1
FS:  00007f137c7f7740(0000) GS:ffffa0c05e580000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 0000000497d46004 CR4: 00000000003606e0
Call Trace:
  ? trace_kprobe_create+0xb6/0x840
  ? _cond_resched+0x19/0x40
  ? _cond_resched+0x19/0x40
  ? __kmalloc+0x62/0x210
  ? argv_split+0x8f/0x140
  ? trace_kprobe_create+0x840/0x840
  ? trace_kprobe_create+0x840/0x840
  create_or_delete_trace_kprobe+0x11/0x30
  trace_run_command+0x50/0x90
  trace_parse_run_command+0xc1/0x160
  probes_write+0x10/0x20
  __vfs_write+0x3a/0x1b0
  ? apparmor_file_permission+0x1a/0x20
  ? security_file_permission+0x31/0xf0
  ? _cond_resched+0x19/0x40
  vfs_write+0xb1/0x1a0
  ksys_write+0x55/0xc0
  __x64_sys_write+0x1a/0x20
  do_syscall_64+0x5a/0x120
  entry_SYSCALL_64_after_hwframe+0x44/0xa9

Fix by doing the proper argument checks in trace_kprobe_create().

Cc: Ingo Molnar <mingo@redhat.com>
Link: https://lore.kernel.org/lkml/20190111095108.b79a2ee026185cbd62365977@kernel.org
Link: http://lkml.kernel.org/r/20190111060113.GA22841@xps-13
Fixes: 6212dd29683e ("tracing/kprobes: Use dyn_event framework for kprobe events")
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Andrea Righi <righi.andrea@gmail.com>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

sbitmap: Protect swap_lock from hardirq

Because we may call blk_mq_get_driver_tag() directly from
blk_mq_dispatch_rq_list() without holding any lock, then HARDIRQ may
come and the above DEADLOCK is triggered.

Commit ab53dcfb3e7b ("sbitmap: Protect swap_lock from hardirq") tries to
fix this issue by using 'spin_lock_bh', which isn't enough because we
complete request from hardirq context direclty in case of multiqueue.

Cc: Clark Williams <williams@redhat.com>
Fixes: ab53dcfb3e7b ("sbitmap: Protect swap_lock from hardirq")
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

sbitmap: Protect swap_lock from softirqs

The swap_lock used by sbitmap has a chain with locks taken from softirq,
but the swap_lock is not protected from being preempted by softirqs.

A chain exists of:

sbq->ws[i].wait -> dispatch_wait_lock -> swap_lock

Where the sbq->ws[i].wait lock can be taken from softirq context, which
means all locks below it in the chain must also be protected from
softirqs.

Reported-by: Clark Williams <williams@redhat.com>
Fixes: 58ab5e32e6fd ("sbitmap: silence bogus lockdep IRQ warning")
Fixes: ea86ea2cdced ("sbitmap: amortize cost of clearing bits")
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'gpio-v5.0-2' of git://git./linux/kernel/git/linusw/linux-gpio

Pull GPIO fixes from Linus Walleij:
"The patch hitting the MMC/SD subsystem is fixing up my own mess when
  moving semantics from MMC/SD over to gpiolib. Ulf is on vacation but I
  managed to reach him on chat and obtain his ACK.

  The other two are early-rc fixes that are not super serious but pretty
  annoying so I'd like to get rid of them.

  Summary:

   - Get rid of some WARN_ON() from the ACPI code

   - Staticize a symbol

   - Fix MMC polarity detection"

* tag 'gpio-v5.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
  mmc: core: don't override the CD GPIO level when "cd-inverted" is set
  gpio: pca953x: Make symbol 'pca953x_i2c_regmap' static
  gpiolib-acpi: Remove unnecessary WARN_ON from acpi_gpiochip_free_interrupts

Merge tag 'mfd-next-4.21' of git://git./linux/kernel/git/lee/mfd

Pull MFD updates from Lee Jones:
"New Device Support
   - Add support for Power Supply to AXP813
   - Add support for GPIO, ADC, AC and Battery Power Supply to AXP803
   - Add support for UART to Exynos LPASS

  Fix-ups:
   - Use supplied MACROS; ti_am335x_tscadc
   - Trivial spelling/whitespace/alignment; tmio, axp20x, rave-sp
   - Regmap changes; bd9571mwv, wm5110-tables
   - Kconfig dependencies; MFD_AT91_USART
   - Supply shared data for child-devices; madera-core
   - Use new of_node_name_eq() API call; max77620, stmpe
   - Use managed resources (devm_*); tps65218
   - Comment descriptions; ingenic-tcu
   - Coding style; madera-core

  Bug Fixes:
   - Fix section mismatches; twl-core, db8500-prcmu
   - Correct error path related issues; mt6397-core, ab8500-core, mc13xxx-core
   - IRQ related fixes; tps6586x
   - Ensure proper initialisation sequence; qcom_rpm
   - Repair potential memory leak; cros_ec_dev"

* tag 'mfd-next-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (25 commits)
  mfd: exynos-lpass: Enable UART module support
  mfd: mc13xxx: Fix a missing check of a register-read failure
  mfd: cros_ec: Add commands to control codec
  mfd: madera: Remove spurious semicolon in while loop
  mfd: rave-sp: Fix typo in rave_sp_checksum comment
  mfd: ingenic-tcu: Fix bit field description in header
  mfd: tps65218: Use devm_regmap_add_irq_chip and clean up error path in probe()
  mfd: Use of_node_name_eq() for node name comparisons
  mfd: cros_ec_dev: Add missing mfd_remove_devices() call in remove
  mfd: axp20x: Add supported cells for AXP803
  mfd: axp20x: Re-align MFD cell entries
  mfd: axp20x: Add AC power supply cell for AXP813
  mfd: wm5110: Add missing ASRC rate register
  mfd: qcom_rpm: write fw_version to CTRL_REG
  mfd: tps6586x: Handle interrupts on suspend
  mfd: madera: Add shared data for accessory detection
  mfd: at91-usart: Add platform dependency
  mfd: bd9571mwv: Add volatile register to make DVFS work
  mfd: ab8500-core: Return zero in get_register_interruptible()
  mfd: tmio: Typo s/use use/use/
  ...

Merge tag 'backlight-next-4.21' of git://git./linux/kernel/git/lee/backlight

Pull backlight updates from Lee Jones:
"Fix-ups:
   - Use new of_node_name_eq() API call

  Bug Fixes:
   - Internally track 'enabled' state in pwm_bl
   - Fix auto-generated pwm_bl brightness tables parsed by DT

* tag 'backlight-next-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight:
  backlight: 88pm860x_bl: Use of_node_name_eq for node name comparisons
  backlight: pwm_bl: Fix devicetree parsing with auto-generated brightness tables
  backlight: pwm_bl: Re-add driver internal enabled tracking

netfilter: nft_flow_offload: fix checking method of conntrack helper

This patch uses nfct_help() to detect whether an established connection
needs conntrack helper instead of using test_bit(IPS_HELPER_BIT,
&ct->status).

The reason is that IPS_HELPER_BIT is only set when using explicit CT
target.

However, in the case that a device enables conntrack helper via command
"echo 1 > /proc/sys/net/netfilter/nf_conntrack_helper", the status of
IPS_HELPER_BIT will not present any change, and consequently it loses
the checking ability in the context.

Signed-off-by: Henry Yen <henry.yen@mediatek.com>
Reviewed-by: Ryder Lee <ryder.lee@mediatek.com>
Tested-by: John Crispin <john@phrozen.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Linux 5.0-rc2

kernel/sys.c: Clarify that UNAME26 does not generate unique versions anymore

UNAME26 is a mechanism to report Linux's version as 2.6.x, for
compatibility with old/broken software.  Due to the way it is
implemented, it would have to be updated after 5.0, to keep the
resulting versions unique.  Linus Torvalds argued:

"Do we actually need this?

  I'd rather let it bitrot, and just let it return random versions. It
  will just start again at 2.4.60, won't it?

  Anybody who uses UNAME26 for a 5.x kernel might as well think it's
  still 4.x. The user space is so old that it can't possibly care about
  differences between 4.x and 5.x, can it?

  The only thing that matters is that it shows "2.4.<largeenough>",
  which it will do regardless"

Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'armsoc-fixes' of git://git./linux/kernel/git/arm/arm-soc

Pull ARM SoC fixes from Olof Johansson:
"A bigger batch than I anticipated this week, for two reasons:

   - Some fallout on Davinci from board file -> DTB conversion, that
     also includes a few longer-standing fixes (i.e. not recent
     regressions).

   - drivers/reset material that has been in linux-next for a while, but
     didn't get sent to us until now for a variety of reasons
     (maintainer out sick, holidays, etc). There's a functional
     dependency in there such that one platform (Altera's SoCFPGA) won't
     boot without one of the patches; instead of reverting the patch
     that got merged, I looked at this set and decided it was small
     enough that I'll pick it up anyway. If you disagree I can revisit
     with a smaller set.

  That being said, there's also a handful of the usual stuff:

   - Fix for a crash on Armada 7K/8K when the kernel touches
     PSCI-reserved memory

   - Fix for PCIe reset on Macchiatobin (Armada 8K development board,
     what this email is sent from in fact :)

   - Enable a few new-merged modules for Amlogic in arm64 defconfig

   - Error path fixes on Integrator

   - Build fix for Renesas and Qualcomm

   - Initialization fix for Renesas RZ/G2E

  .. plus a few more fixlets"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (28 commits)
  ARM: integrator: impd1: use struct_size() in devm_kzalloc()
  qcom-scm: Include <linux/err.h> header
  gpio: pl061: handle failed allocations
  ARM: dts: kirkwood: Fix polarity of GPIO fan lines
  arm64: dts: marvell: mcbin: fix PCIe reset signal
  arm64: dts: marvell: armada-ap806: reserve PSCI area
  ARM: dts: da850-lcdk: Correct the sound card name
  ARM: dts: da850-lcdk: Correct the audio codec regulators
  ARM: dts: da850-evm: Correct the sound card name
  ARM: dts: da850-evm: Correct the audio codec regulators
  ARM: davinci: omapl138-hawk: fix label names in GPIO lookup entries
  ARM: davinci: dm644x-evm: fix label names in GPIO lookup entries
  ARM: davinci: dm355-evm: fix label names in GPIO lookup entries
  ARM: davinci: da850-evm: fix label names in GPIO lookup entries
  ARM: davinci: da830-evm: fix label names in GPIO lookup entries
  arm64: defconfig: enable modules for amlogic s400 sound card
  reset: uniphier-glue: Add AHCI reset control support in glue layer
  dt-bindings: reset: uniphier: Add AHCI core reset description
  reset: uniphier-usb3: Rename to reset-uniphier-glue
  dt-bindings: reset: uniphier: Replace the expression of USB3 with generic peripherals
  ...

Merge tag 'for-5.0-rc1-tag' of git://git./linux/kernel/git/kdave/linux

Pull btrfs fixes from David Sterba:

- two regression fixes in clone/dedupe ioctls, the generic check
   callback needs to lock extents properly and wait for io to avoid
   problems with writeback and relocation

- fix deadlock when using free space tree due to block group creation

- a recently added check refuses a valid fileystem with seeding device,
   make that work again with a quickfix, proper solution needs more
   intrusive changes

* tag 'for-5.0-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: Use real device structure to verify dev extent
  Btrfs: fix deadlock when using free space tree due to block group creation
  Btrfs: fix race between reflink/dedupe and relocation
  Btrfs: fix race between cloning range ending at eof and writeback

Merge tag 'driver-core-5.0-rc2' of git://git./linux/kernel/git/gregkh/driver-core

Pull driver core fixes from Greg KH:
"Here is one small sysfs change, and a documentation update for 5.0-rc2

  The sysfs change moves from using BUG_ON to WARN_ON, as discussed in
  an email thread on lkml while trying to track down another driver bug.
  sysfs should not be crashing and preventing people from seeing where
  they went wrong. Now it properly recovers and warns the developer.

  The documentation update removes the use of BUS_ATTR() as the kernel
  is moving away from this to use the specific BUS_ATTR_RW() and friends
  instead. There are pending patches in all of the different subsystems
  to remove the last users of this macro, but for now, don't advertise
  it should be used anymore to keep new ones from being introduced.

  Both have been in linux-next with no reported issues"

* tag 'driver-core-5.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  Documentation: driver core: remove use of BUS_ATTR
  sysfs: convert BUG_ON to WARN_ON

Merge tag 'staging-5.0-rc2' of git://git./linux/kernel/git/gregkh/staging

Pull staging driver fixes from Greg KH:
"Here are some small staging driver fixes for some reported issues.

  One reverts a patch that was made to the rtl8723bs driver that turned
  out to not be needed at all as it was a bug in clang. The others fix
  up some reported issues in the rtl8188eu driver and update the
  MAINTAINERS file to point to Larry for this driver so he can get the
  bug reports easier.

  All have been in linux-next with no reported issues"

* tag 'staging-5.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  Revert "staging: rtl8723bs: Mark ACPI table declaration as used"
  staging: rtl8188eu: Fix module loading from tasklet for WEP encryption
  staging: rtl8188eu: Fix module loading from tasklet for CCMP encryption
  MAINTAINERS: Add entry for staging driver r8188eu

Merge tag 'tty-5.0-rc2' of git://git./linux/kernel/git/gregkh/tty

Pull tty/serial fixes from Greg KH:
"Here are 2 tty and serial fixes for 5.0-rc2 that resolve some reported
  issues.

  The first is a simple serial driver fix for a regression that showed
  up in 5.0-rc1. The second one resolves a number of reported issues
  with the recent tty locking fixes that went into 5.0-rc1. Lots of
  people have tested the second one and say it resolves their issues.

  Both have been in linux-next with no reported issues"

* tag 'tty-5.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  tty: Don't hold ldisc lock in tty_reopen() if ldisc present
  serial: lantiq: Do not swap register read/writes

Merge tag 'usb-5.0-rc2' of git://git./linux/kernel/git/gregkh/usb

Pull USB fixes from Greg KH:
"Here are some small USB driver fixes and quirk updates for 5.0-rc2.

  The majority here are some quirks for some storage devices to get them
  to work properly. There's also a fix here to resolve the reported
  issues with some audio devices that say they are UAC3 compliant, but
  really are not.

  And a fix up for the MAINTAINERS file to remove a dead url.

  All have been in linux-next with no reported issues"

* tag 'usb-5.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  usb: storage: Remove outdated URL from MAINTAINERS
  USB: Add USB_QUIRK_DELAY_CTRL_MSG quirk for Corsair K70 RGB
  usbcore: Select only first configuration for non-UAC3 compliant devices
  USB: storage: add quirk for SMI SM3350
  USB: storage: don't insert sane sense for SPC3+ when bad sense specified
  usb: cdc-acm: send ZLP for Telit 3G Intel based modems

Merge tag '5.0-rc1-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6

Pull cifs fixes from Steve French:
"A set of cifs/smb3 fixes, 4 for stable, most from Pavel. His patches
  fix an important set of crediting (flow control) problems, and also
  two problems in cifs_writepages, ddressing some large i/o and also
  compounding issues"

* tag '5.0-rc1-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: update internal module version number
  CIFS: Fix error paths in writeback code
  CIFS: Move credit processing to mid callbacks for SMB3
  CIFS: Fix credits calculation for cancelled requests
  cifs: Fix potential OOB access of lock element array
  cifs: Limit memory used by lock request calls to a page
  cifs: move large array from stack to heap
  CIFS: Do not hide EINTR after sending network packets
  CIFS: Fix credit computation for compounded requests
  CIFS: Do not set credits to 1 if the server didn't grant anything
  CIFS: Fix adjustment of credits for MTU requests
  cifs: Fix a tiny potential memory leak
  cifs: Fix a debug message

Merge tag 'reset-for-5.0-rc2' of git://git.pengutronix.de/git/pza/linux into fixes

Late reset controller changes for v5.0

This adds missing deassert functionality to the ARC HSDK reset driver,
fixes some indentation and grammar issues in the kernel docs, adds a
helper to count the number of resets on a device for the non-DT case
as well, adds an early reset driver for SoCFPGA and simple reset driver
support for Stratix10, and generalizes the uniphier USB3 glue layer
reset to also cover AHCI.

* tag 'reset-for-5.0-rc2' of git://git.pengutronix.de/git/pza/linux:
  reset: uniphier-glue: Add AHCI reset control support in glue layer
  dt-bindings: reset: uniphier: Add AHCI core reset description
  reset: uniphier-usb3: Rename to reset-uniphier-glue
  dt-bindings: reset: uniphier: Replace the expression of USB3 with generic peripherals
  ARM: socfpga: dts: document "altr,stratix10-rst-mgr" binding
  reset: socfpga: add an early reset driver for SoCFPGA
  reset: fix null pointer dereference on dev by dev_name
  reset: Add reset_control_get_count()
  reset: Improve reset controller kernel docs
  ARC: HSDK: improve reset driver

Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'mvebu-fixes-5.0-1' of git://git.infradead.org/linux-mvebu into fixes

mvebu fixes for 5.0

They are all device tree fixes which also worth being in stable:

- Reserve PSCI area on Armada 7K/8K preventing the kernel accessing
   this area and crashing while doing it.

- Use correct PCIe reset signal on MACCHIATOBin  (Armada 8040 based)

- Fix polarity of GPIO fan line D-Link DNS NASes(kikwood based)

* tag 'mvebu-fixes-5.0-1' of git://git.infradead.org/linux-mvebu:
  ARM: dts: kirkwood: Fix polarity of GPIO fan lines
  arm64: dts: marvell: mcbin: fix PCIe reset signal
  arm64: dts: marvell: armada-ap806: reserve PSCI area

Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'integrator-fixes-armsoc' of git://git./linux/kernel/git/linusw/linux-integrator into fixes

Fixes for the Integrator:
- Handle failed allocations in the IM/PC bus attachment.
- Use struct_size() for allocation.

* tag 'integrator-fixes-armsoc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator:
ARM: integrator: impd1: use struct_size() in devm_kzalloc()
gpio: pl061: handle failed allocations

Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'amlogic-fixes' of https://git./linux/kernel/git/khilman/linux-amlogic into fixes

Amlogic DT fixes for v5.0-rc
- arm64: defconfig: enable modules for amlogic s400 sound card

* tag 'amlogic-fixes' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
arm64: defconfig: enable modules for amlogic s400 sound card

Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'qcom-fixes-for-5.0-rc1' of git://git./linux/kernel/git/agross/linux into fixes

Qualcomm Driver Fixes for 5.0-rc1

* Add required includes into qcom_scm.h

* tag 'qcom-fixes-for-5.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux:
qcom-scm: Include <linux/err.h> header

Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'davinci-fixes-for-v5.0' of git://git./linux/kernel/git/nsekhar/linux-davinci into fixes

This pull request fixes some more regressions on legacy
DaVinci board support due to GPIO driver clean-up introduced
in v4.20 kernel. These are marked for stable.

Also has fixes for some long standing Audio issues on DA850
boards.

* tag 'davinci-fixes-for-v5.0' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
  ARM: dts: da850-lcdk: Correct the sound card name
  ARM: dts: da850-lcdk: Correct the audio codec regulators
  ARM: dts: da850-evm: Correct the sound card name
  ARM: dts: da850-evm: Correct the audio codec regulators
  ARM: davinci: omapl138-hawk: fix label names in GPIO lookup entries
  ARM: davinci: dm644x-evm: fix label names in GPIO lookup entries
  ARM: davinci: dm355-evm: fix label names in GPIO lookup entries
  ARM: davinci: da850-evm: fix label names in GPIO lookup entries
  ARM: davinci: da830-evm: fix label names in GPIO lookup entries

Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'renesas-fixes-for-v5.0' of https://git./linux/kernel/git/horms/renesas into fixes

Renesas ARM Based SoC Fixes for v5.0

Renesas SoCs:
* Fix build regressions caused by move of Kconfig symbols

RZ/G2E (r8a774c0) SoC:
* Correct initialization order of 3DG-{A,B} in SYSC driver

* tag 'renesas-fixes-for-v5.0' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
soc: renesas: r8a774c0-sysc: Fix initialization order of 3DG-{A,B}
ARM: shmobile: fix build regressions

Signed-off-by: Olof Johansson <olof@lixom.net>

phy: fix build breakage: add PHY_MODE_SATA

Commit 49e54187ae0b ("ata: libahci_platform: comply to PHY framework") uses
the PHY_MODE_SATA, but that enum had not yet been added. This caused a
build failure for me, with today's linux.git.

Also, there is a potentially conflicting (mis-named) PHY_MODE_SATA, hiding
in the Marvell Berlin SATA PHY driver.

Fix the build by:

    1) Renaming Marvell's defined value to a more scoped name,
       in order to avoid any potential conflicts: PHY_BERLIN_MODE_SATA.

    2) Adding the missing enum, which was going to be added anyway as part
       of [1].

[1] https://lkml.kernel.org/r/20190108163124.6409-3-miquel.raynal@bootlin.com

Fixes: 49e54187ae0b ("ata: libahci_platform: comply to PHY framework")

Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Acked-by: Jens Axboe <axboe@kernel.dk>
Acked-by: Olof Johansson <olof@lixom.net>
Cc: Grzegorz Jaszczyk <jaz@semihalf.com>
Cc: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'for-linus-20190112' of git://git.kernel.dk/linux-block

Pull block fixes from Jens Axboe:

- NVMe pull request from Christoph, with little fixes all over the map

- Loop caching fix for offset/bs change (Jaegeuk Kim)

- Block documentation tweaks (Jeff, Jon, Weiping, John)

- null_blk zoned tweak (John)

- ahch mvebu suspend/resume support. Should have gone into the merge
   window, but there was some confusion on which tree had it. (Miquel)

* tag 'for-linus-20190112' of git://git.kernel.dk/linux-block: (22 commits)
  ata: ahci: mvebu: request PHY suspend/resume for Armada 3700
  ata: ahci: mvebu: add Armada 3700 initialization needed for S2RAM
  ata: ahci: mvebu: do Armada 38x configuration only on relevant SoCs
  ata: ahci: mvebu: remove stale comment
  ata: libahci_platform: comply to PHY framework
  loop: drop caches if offset or block_size are changed
  block: fix kerneldoc comment for blk_attempt_plug_merge()
  nvme: don't initlialize ctrl->cntlid twice
  nvme: introduce NVME_QUIRK_IGNORE_DEV_SUBNQN
  nvme: pad fake subsys NQN vid and ssvid with zeros
  nvme-multipath: zero out ANA log buffer
  nvme-fabrics: unset write/poll queues for discovery controllers
  nvme-tcp: don't ask if controller is fabrics
  nvme-tcp: remove dead code
  nvme-pci: fix out of bounds access in nvme_cqe_pending
  nvme-pci: rerun irq setup on IO queue init errors
  nvme-pci: use the same attributes when freeing host_mem_desc_bufs.
  nvme-pci: fix the wrong setting of nr_maps
  block: doc: add slice_idle_us to bfq documentation
  block: clarify documentation for blk_{start|finish}_plug
  ...

Merge tag 'remove-dma_zalloc_coherent-5.0' of git://git.infradead.org/users/hch/dma-mapping

Pull dma_zalloc_coherent() removal from Christoph Hellwig:
"We've always had a weird situation around dma_zalloc_coherent. To
  safely support mapping the allocations to userspace major
  architectures like x86 and arm have always zeroed allocations from
  dma_alloc_coherent, but a couple other architectures were missing that
  zeroing either always or in corner cases.

  Then later we grew anothe dma_zalloc_coherent interface to explicitly
  request zeroing, but that just added __GFP_ZERO to the allocation
  flags, which for some allocators that didn't end up using the page
  allocator ended up being a no-op and still not zeroing the
  allocations.

  So for this merge window I fixed up all remaining architectures to
  zero the memory in dma_alloc_coherent, and made dma_zalloc_coherent a
  no-op wrapper around dma_alloc_coherent, which fixes all of the above
  issues.

  dma_zalloc_coherent is now pointless and can go away, and Luis helped
  me writing a cocchinelle script and patch series to kill it, which I
  think we should apply now just after -rc1 to finally settle these
  issue"

* tag 'remove-dma_zalloc_coherent-5.0' of git://git.infradead.org/users/hch/dma-mapping:
  dma-mapping: remove dma_zalloc_coherent()
  cross-tree: phase out dma_zalloc_coherent() on headers
  cross-tree: phase out dma_zalloc_coherent()

Merge branch 'bnxt_en-Bug-fixes-for-57500-chips'

Michael Chan says:

====================
bnxt_en: Bug fixes for 57500 chips.

Two small bug fixes for ring checking and context memory allocation
that affect the new 57500 chips.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

bnxt_en: Fix context memory allocation.

When allocating memory pages for context memory, if the last page table
should be fully populated, the current code will set nr_pages to 0 when
calling bnxt_alloc_ctx_mem_blk(). This will cause the last page table
to be completely blank and causing some RDMA failures.

Fix it by setting the last page table's nr_pages to the remainder only
if it is non-zero.

Fixes: 08fe9d181606 ("bnxt_en: Add Level 2 context memory paging support.")
Reported-by: Eric Davis <eric.davis@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

bnxt_en: Fix ring checking logic on 57500 chips.

In bnxt_hwrm_check_pf_rings(), add the proper flag to test the NQ
resources. Without the proper flag, the firmware will change
the NQ resource allocation and remap the IRQ, causing missing
IRQs. This issue shows up when adding MQPRIO TX queues, for example.

Fixes: 36d65be9a880 ("bnxt_en: Disable MSIX before re-reserving NQs/CMPL rings.")
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'for-linus' of git://git./virt/kvm/kvm

Pull KVM fixes from Radim Krčmář:
"Minor fixes for new code, corner cases, and documentation"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  x86/kvm/nVMX: don't skip emulated instruction twice when vmptr address is not backed
  Documentation/virtual/kvm: Update URL for AMD SEV API specification
  KVM/VMX: Avoid return error when flush tlb successfully in the hv_remote_flush_tlb_with_range()
  kvm: sev: Fail KVM_SEV_INIT if already initialized
  KVM: validate userspace input in kvm_clear_dirty_log_protect()
  KVM: x86: Fix bit shifting in update_intel_pt_cfg

Merge tag 'drm-fixes-2019-01-11-1' of git://anongit.freedesktop.org/drm/drm

Pull more drm fixes from Daniel Vetter:
"Dave sends out his pull, everybody remembers holidays are over :-)

  Since Dave's already in weekend mode and it was quite a few patches I
  figured better to apply all the pulls and forward them to you. Hence
  here 2nd part of bugfixes for -rc2.

  nouveau:
   - backlight fix
   - falcon register access fix
   - fan fix.

  i915:
   - Disable PSR for Apple panels
   - Broxton ERR_PTR error state fix
   - Kabylake VECS workaround fix
   - Unwind failure on pinning the gen7 ppgtt
   - GVT workload request allocation fix

  core:
   - Fix fb-helper to work correctly with SDL 1.2 bugs
   - Fix lockdep warning in the atomic ioctl and setproperty"

* tag 'drm-fixes-2019-01-11-1' of git://anongit.freedesktop.org/drm/drm:
  drm/nouveau/falcon: avoid touching registers if engine is off
  drm/nouveau: Don't disable polling in fallback mode
  drm/nouveau: register backlight on pascal and newer
  drm: Fix documentation generation for DP_DPCD_QUIRK_NO_PSR
  drm/i915: init per-engine WAs for all engines
  drm/i915: Unwind failure on pinning the gen7 ppgtt
  drm/i915: Skip the ERR_PTR error state
  drm/i915: Disable PSR in Apple panels
  gpu/drm: Fix lock held when returning to user space.
  drm/fb-helper: Ignore the value of fb_var_screeninfo.pixclock
  drm/fb-helper: Partially bring back workaround for bugs of SDL 1.2
  drm/i915/gvt: Fix workload request allocation before request add

mISDN: hfcsusb: Use struct_size() in kzalloc()

One of the more common cases of allocation size calculations is finding the
size of a structure that has a zero-sized array at the end, along with memory
for some number of elements for that array. For example:

struct foo {
int stuff;
void *entry[];
};

instance = kzalloc(sizeof(struct foo) + sizeof(void *) * count, GFP_KERNEL);

Instead of leaving these open-coded and prone to type mistakes, we can now
use the new struct_size() helper:

instance = kzalloc(struct_size(instance, entry, count), GFP_KERNEL);

This code was detected with the help of Coccinelle.

Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: clear skb->tstamp in bridge forwarding path

Matteo reported forwarding issues inside the linux bridge,
if the enslaved interfaces use the fq qdisc.

Similar to commit 8203e2d844d3 ("net: clear skb->tstamp in
forwarding paths"), we need to clear the tstamp field in
the bridge forwarding path.

Fixes: 80b14dee2bea ("net: Add a new socket option for a future transmit time.")
Fixes: fb420d5d91c1 ("tcp/fq: move back to CLOCK_MONOTONIC")
Reported-and-tested-by: Matteo Croce <mcroce@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'bpfilter-fixes'

Taehee Yoo says:

====================
net: bpfilter: fix two bugs in bpfilter

This patches fix two bugs in the bpfilter_umh which are related in
iptables command.

The first patch adds an exit code for UMH process.
This provides an opportunity to cleanup members of the umh_info
to modules which use the UMH.
In order to identify UMH processes, a new flag PF_UMH is added.

The second patch makes the bpfilter_umh use UMH cleanup callback.

The third patch adds re-start routine for the bpfilter_umh.
The bpfilter_umh does not re-start after error occurred.
because there is no re-start routine in the module.

The fourth patch ensures that the bpfilter.ko module will not removed while
it's being used.
The bpfilter.ko is not protected by locks or module reference counter.
Therefore that can be removed while module is being used.
In order to protect that, mutex is used.

The first and second patch are preparation patches for the third and
fourth patch.

TEST #1
   while :
   do
modprobe bpfilter
kill -9 <pid of the bpfilter_umh>
iptables -vnL
   done

TEST #2
   while :
   do
iptables -I FORWARD -m string --string ap --algo kmp &
iptables -F &
modprobe -rv bpfilter &
   done

TEST #3
   while :
   do
modprobe bpfilter &
modprobe -rv bpfilter &
   done

The TEST1 makes a failure of iptables command.
This is fixed by the third patch.

The TEST2 makes a panic because of a race condition in the bpfilter_umh
module.
This is fixed by the fourth patch.

The TEST3 makes a double-create UMH process.
This is fixed by the third and fourth patch.

v4 :
- declare the exit_umh() as static inline
- check stop flag in the load_umh() to avoid a double-create UMH
v3 :
- Avoid unnecessary list lookup for non-UMH processes
- Add a new PF_UMH flag
v2 : add the first and second patch
v1 : Initial patch
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

net: bpfilter: disallow to remove bpfilter module while being used

The bpfilter.ko module can be removed while functions of the bpfilter.ko
are executing. so panic can occurred. in order to protect that, locks can
be used. a bpfilter_lock protects routines in the
__bpfilter_process_sockopt() but it's not enough because __exit routine
can be executed concurrently.

Now, the bpfilter_umh can not run in parallel.
So, the module do not removed while it's being used and it do not
double-create UMH process.
The members of the umh_info and the bpfilter_umh_ops are protected by
the bpfilter_umh_ops.lock.

test commands:
   while :
   do
iptables -I FORWARD -m string --string ap --algo kmp &
modprobe -rv bpfilter &
   done

splat looks like:
[  298.623435] BUG: unable to handle kernel paging request at fffffbfff807440b
[  298.628512] #PF error: [normal kernel read fault]
[  298.633018] PGD 124327067 P4D 124327067 PUD 11c1a3067 PMD 119eb2067 PTE 0
[  298.638859] Oops: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI
[  298.638859] CPU: 0 PID: 2997 Comm: iptables Not tainted 4.20.0+ #154
[  298.638859] RIP: 0010:__mutex_lock+0x6b9/0x16a0
[  298.638859] Code: c0 00 00 e8 89 82 ff ff 80 bd 8f fc ff ff 00 0f 85 d9 05 00 00 48 8b 85 80 fc ff ff 48 bf 00 00 00 00 00 fc ff df 48 c1 e8 03 <80> 3c 38 00 0f 85 1d 0e 00 00 48 8b 85 c8 fc ff ff 49 39 47 58 c6
[  298.638859] RSP: 0018:ffff88810e7777a0 EFLAGS: 00010202
[  298.638859] RAX: 1ffffffff807440b RBX: ffff888111bd4d80 RCX: 0000000000000000
[  298.638859] RDX: 1ffff110235ff806 RSI: ffff888111bd5538 RDI: dffffc0000000000
[  298.638859] RBP: ffff88810e777b30 R08: 0000000080000002 R09: 0000000000000000
[  298.638859] R10: 0000000000000000 R11: 0000000000000000 R12: fffffbfff168a42c
[  298.638859] R13: ffff888111bd4d80 R14: ffff8881040e9a05 R15: ffffffffc03a2000
[  298.638859] FS:  00007f39e3758700(0000) GS:ffff88811ae00000(0000) knlGS:0000000000000000
[  298.638859] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  298.638859] CR2: fffffbfff807440b CR3: 000000011243e000 CR4: 00000000001006f0
[  298.638859] Call Trace:
[  298.638859]  ? mutex_lock_io_nested+0x1560/0x1560
[  298.638859]  ? kasan_kmalloc+0xa0/0xd0
[  298.638859]  ? kmem_cache_alloc+0x1c2/0x260
[  298.638859]  ? __alloc_file+0x92/0x3c0
[  298.638859]  ? alloc_empty_file+0x43/0x120
[  298.638859]  ? alloc_file_pseudo+0x220/0x330
[  298.638859]  ? sock_alloc_file+0x39/0x160
[  298.638859]  ? __sys_socket+0x113/0x1d0
[  298.638859]  ? __x64_sys_socket+0x6f/0xb0
[  298.638859]  ? do_syscall_64+0x138/0x560
[  298.638859]  ? entry_SYSCALL_64_after_hwframe+0x49/0xbe
[  298.638859]  ? __alloc_file+0x92/0x3c0
[  298.638859]  ? init_object+0x6b/0x80
[  298.638859]  ? cyc2ns_read_end+0x10/0x10
[  298.638859]  ? cyc2ns_read_end+0x10/0x10
[  298.638859]  ? hlock_class+0x140/0x140
[  298.638859]  ? sched_clock_local+0xd4/0x140
[  298.638859]  ? sched_clock_local+0xd4/0x140
[  298.638859]  ? check_flags.part.37+0x440/0x440
[  298.638859]  ? __lock_acquire+0x4f90/0x4f90
[  298.638859]  ? set_rq_offline.part.89+0x140/0x140
[ ... ]

Fixes: d2ba09c17a06 ("net: add skeleton of bpfilter kernel module")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: bpfilter: restart bpfilter_umh when error occurred

The bpfilter_umh will be stopped via __stop_umh() when the bpfilter
error occurred.
The bpfilter_umh() couldn't start again because there is no restart
routine.

The section of the bpfilter_umh_{start/end} is no longer .init.rodata
because these area should be reused in the restart routine. hence
the section name is changed to .bpfilter_umh.

The bpfilter_ops->start() is restart callback. it will be called when
bpfilter_umh is stopped.
The stop bit means bpfilter_umh is stopped. this bit is set by both
start and stop routine.

Before this patch,
Test commands:
   $ iptables -vnL
   $ kill -9 <pid of bpfilter_umh>
   $ iptables -vnL
   [  480.045136] bpfilter: write fail -32
   $ iptables -vnL

All iptables commands will fail.

After this patch,
Test commands:
   $ iptables -vnL
   $ kill -9 <pid of bpfilter_umh>
   $ iptables -vnL
   $ iptables -vnL

Now, all iptables commands will work.

Fixes: d2ba09c17a06 ("net: add skeleton of bpfilter kernel module")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: bpfilter: use cleanup callback to release umh_info

Now, UMH process is killed, do_exit() calls the umh_info->cleanup callback
to release members of the umh_info.
This patch makes bpfilter_umh's cleanup routine to use the
umh_info->cleanup callback.

Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

umh: add exit routine for UMH process

A UMH process which is created by the fork_usermode_blob() such as
bpfilter needs to release members of the umh_info when process is
terminated.
But the do_exit() does not release members of the umh_info. hence module
which uses UMH needs own code to detect whether UMH process is
terminated or not.
But this implementation needs extra code for checking the status of
UMH process. it eventually makes the code more complex.

The new PF_UMH flag is added and it is used to identify UMH processes.
The exit_umh() does not release members of the umh_info.
Hence umh_info->cleanup callback should release both members of the
umh_info and the private data.

Suggested-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

isdn: i4l: isdn_tty: Fix some concurrency double-free bugs

The functions isdn_tty_tiocmset() and isdn_tty_set_termios() may be
concurrently executed.

isdn_tty_tiocmset
  isdn_tty_modem_hup
    line 719: kfree(info->dtmf_state);
    line 721: kfree(info->silence_state);
    line 723: kfree(info->adpcms);
    line 725: kfree(info->adpcmr);

isdn_tty_set_termios
  isdn_tty_modem_hup
    line 719: kfree(info->dtmf_state);
    line 721: kfree(info->silence_state);
    line 723: kfree(info->adpcms);
    line 725: kfree(info->adpcmr);

Thus, some concurrency double-free bugs may occur.

These possible bugs are found by a static tool written by myself and
my manual code review.

To fix these possible bugs, the mutex lock "modem_info_mutex" used in
isdn_tty_tiocmset() is added in isdn_tty_set_termios().

Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

vhost/vsock: fix vhost vsock cid hashing inconsistent

The vsock core only supports 32bit CID, but the Virtio-vsock spec define
CID (dst_cid and src_cid) as u64 and the upper 32bits is reserved as
zero. This inconsistency causes one bug in vhost vsock driver. The
scenarios is:

  0. A hash table (vhost_vsock_hash) is used to map an CID to a vsock
  object. And hash_min() is used to compute the hash key. hash_min() is
  defined as:
  (sizeof(val) <= 4 ? hash_32(val, bits) : hash_long(val, bits)).
  That means the hash algorithm has dependency on the size of macro
  argument 'val'.
  0. In function vhost_vsock_set_cid(), a 64bit CID is passed to
  hash_min() to compute the hash key when inserting a vsock object into
  the hash table.
  0. In function vhost_vsock_get(), a 32bit CID is passed to hash_min()
  to compute the hash key when looking up a vsock for an CID.

Because the different size of the CID, hash_min() returns different hash
key, thus fails to look up the vsock object for an CID.

To fix this bug, we keep CID as u64 in the IOCTLs and virtio message
headers, but explicitly convert u64 to u32 when deal with the hash table
and vsock core.

Fixes: 834e772c8db0 ("vhost/vsock: fix use-after-free in network stack callers")
Link: https://github.com/stefanha/virtio/blob/vsock/trunk/content.tex
Signed-off-by: Zha Bin <zhabin@linux.alibaba.com>
Reviewed-by: Liu Jiang <gerry@linux.alibaba.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'stmmac-fixes'

Jose Abreu says:

====================
net: stmmac: Misc Fixes

Some small fixes for stmmac targeting -net. Detailed info in commit log.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

net: stmmac: Prevent RX starvation in stmmac_napi_poll()

Currently, TX is given a budget which is consumed by stmmac_tx_clean()
and stmmac_rx() is given the remaining non-consumed budget.

This is wrong and in case we are sending a large number of packets this
can starve RX because remaining budget will be low.

Let's give always the same budget for RX and TX clean.

While at it, check if we missed any interrupts while we were in NAPI
callback by looking at DMA interrupt status.

Cc: Joao Pinto <jpinto@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: stmmac: Fix the logic of checking if RX Watchdog must be enabled

RX Watchdog can be disabled by platform definitions but currently we are
initializing the descriptors before checking if Watchdog must be
disabled or not.

Fix this by checking earlier if user wants Watchdog disabled or not.

Cc: Joao Pinto <jpinto@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: stmmac: Check if CBS is supported before configuring

Check if CBS is currently supported before trying to configure it in HW.

Cc: Joao Pinto <jpinto@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: stmmac: dwxgmac2: Only clear interrupts that are active

In DMA interrupt handler we were clearing all interrupts status, even
the ones that were not active. Fix this and only clear the active
interrupts.

Cc: Joao Pinto <jpinto@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: stmmac: Fix PCI module removal leak

Since commit b7d0f08e9129, the enable / disable of PCI device is not
managed which will result in IO regions not being automatically unmapped.
As regions continue mapped it is currently not possible to remove and
then probe again the PCI module of stmmac.

Fix this by manually unmapping regions on remove callback.

Changes from v1:
- Fix build error

Cc: Joao Pinto <jpinto@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Fixes: b7d0f08e9129 ("net: stmmac: Fix WoL for PCI-based setups")
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ata: ahci: mvebu: request PHY suspend/resume for Armada 3700

A feature has been added in the libahci driver: the possibility to set
a new flag in hpriv->flags to let the core handle PHY suspend/resume
automatically. Make use of this feature to make suspend to RAM work
with SATA drives on A3700.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

ata: ahci: mvebu: add Armada 3700 initialization needed for S2RAM

A3700 comphy initialization is done in the firmware (TF-A). Looking at
the SATA PHY initialization routine, there is a comment about "vendor
specific" registers. Two registers are mentioned. They are not
initialized there in the firmware because they are AHCI related, while
the firmware at this location does only PHY configuration. The
solution to avoid doing such initialization is relying on U-Boot.

While this work at boot time, U-Boot is definitely not going to run
during a resume after suspending to RAM.

Two possible solutions were considered:
* Fixing the firmware.
* Fixing the kernel driver.

The first solution would take ages to propagate, while the second
solution is easy to implement as the driver as been a little bit
reworked to prepare for such platform configuration. Hence, this patch
adds an Armada 3700 configuration function to set these two registers
both at boot time (in the probe) and after a suspend (in the resume
path).

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

ata: ahci: mvebu: do Armada 38x configuration only on relevant SoCs

At the beginning, only Armada 38x SoCs where supported by the
ahci_mvebu.c driver. Commit 15d3ce7b63bd ("ata: ahci_mvebu: add
support for Armada 3700 variant") introduced Armada 3700 support. As
opposed to Armada 38x SoCs, the 3700 variants do not have to configure
mbus and the regret option. This patch took care of avoiding such
configuration when not needed in the probe function, but failed to do
the same in the resume path. While doing so looks harmless by
experience, let's clean the driver logic and avoid doing this useless
configuration with Armada 3700 SoCs.

Because the logic is very similar between these two places, it has
been decided to factorize this code and put it in a "Armada 38x
configuration function". This function is part of a new
(per-compatible) platform data structure, so that the addition of such
configuration function for Armada 3700 will be eased.

Fixes: 15d3ce7b63bd ("ata: ahci_mvebu: add support for Armada 3700 variant")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

ata: ahci: mvebu: remove stale comment

For Armada-38x (32-bit) SoCs, PM platform support has been added since:
commit 32f9494c9dfd ("ARM: mvebu: prepare pm-board.c for the
introduction of Armada 38x support")
commit 3cbd6a6ca81c ("ARM: mvebu: Add standby support")

For Armada 64-bit SoCs, like the A3700 also using this AHCI driver, PM
platform support has always existed.

There are even suspend/resume hooks in this driver since:
commit d6ecf15814888 ("ata: ahci_mvebu: add suspend/resume support")

Remove the stale comment at the end of this driver stating that all
the above does not exist yet.

Fixes: d6ecf15814888 ("ata: ahci_mvebu: add suspend/resume support")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

ata: libahci_platform: comply to PHY framework

Current implementation of the libahci does not take into account the
new PHY framework. Correct the situation by adding a call to
phy_set_mode() before phy_power_on().

PHYs should also be handled at suspend/resume time. For this, call
ahci_platform_enable/disable_phys() at suspend/resume_host() time. These
calls are guarded by a HFLAG (AHCI_HFLAG_SUSPEND_PHYS) that the user of
the libahci driver must set manually in hpriv->flags at probe time. This
is to avoid breaking users that have not been tested with this change.

Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Suggested-by: Grzegorz Jaszczyk <jaz@semihalf.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Merge git://git./pub/scm/linux/kernel/git/bpf/bpf

Daniel Borkmann says:

====================
pull-request: bpf 2019-01-11

The following pull-request contains BPF updates for your *net* tree.

The main changes are:

1) Fix TCP-BPF support for correctly setting the initial window
   via TCP_BPF_IW on an active TFO sender, from Yuchung.

2) Fix a panic in BPF's stack_map_get_build_id()'s ELF parsing on
   32 bit archs caused by page_address() returning NULL, from Song.

3) Fix BTF pretty print in kernel and bpftool when bitfield member
   offset is greater than 256. Also add test cases, from Yonghong.

4) Fix improper argument handling in xdp1 sample, from Ioana.

5) Install missing tcp_server.py and tcp_client.py files from
   BPF selftests, from Anders.

6) Add test_libbpf to gitignore in libbpf and BPF selftests,
   from Stanislav.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'i2c/for-current' of git://git./linux/kernel/git/wsa/linux

Pull i2c fixes from Wolfram Sang:
"I2C has one core and one driver bugfix for you"

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: tegra: Fix Maximum transfer size
i2c: dev: prevent adapter retries and timeout being set as minus value

Merge tag 'arm64-fixes' of git://git./linux/kernel/git/arm64/linux

Pull arm64 fixes from Will Deacon:
"Another handful of arm64 fixes here. Most of the complication comes
  from improving our kpti code to avoid lengthy pauses (30+ seconds)
  during boot when we rewrite the page tables. There are also a couple
  of IORT fixes that came in via Lorenzo.

  Summary:

   - Don't error in kexec_file_load if kaslr-seed is missing in
     device-tree

   - Fix incorrect argument type passed to iort_match_node_callback()

   - Fix IORT build failure when CONFIG_IOMMU_API=n

   - Fix kpti performance regression with new rodata default option

   - Typo fix"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: kexec_file: return successfully even if kaslr-seed doesn't exist
  ACPI/IORT: Fix rc_dma_get_range()
  arm64: kpti: Avoid rewriting early page tables when KASLR is enabled
  arm64: asm-prototypes: Fix fat-fingered typo in comment
  ACPI/IORT: Fix build when CONFIG_IOMMU_API=n

Merge tag 'ceph-for-5.0-rc2' of git://github.com/ceph/ceph-client

Pull ceph updates from Ilya Dryomov:
"A patch to allow setting abort_on_full and a fix for an old "rbd
  unmap" edge case, marked for stable"

* tag 'ceph-for-5.0-rc2' of git://github.com/ceph/ceph-client:
  rbd: don't return 0 on unmap if RBD_DEV_FLAG_REMOVING is set
  ceph: use vmf_error() in ceph_filemap_fault()
  libceph: allow setting abort_on_full for rbd

Merge branch 'perf-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull perf tooling updates from Ingo Molnar:
"Tooling changes only: fixes and a few stray improvements.

  Most of the diffstat is dominated by a PowerPC related fix of system
  call trace output beautification that allows us to (again) use the
  UAPI header version and sync up with the kernel's version of PowerPC
  system call names in the arch/powerpc/kernel/syscalls/syscall.tbl
  header"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (36 commits)
  tools headers powerpc: Remove unistd.h
  perf powerpc: Rework syscall table generation
  perf symbols: Add 'arch_cpu_idle' to the list of kernel idle symbols
  tools include uapi: Sync linux/if_link.h copy with the kernel sources
  tools include uapi: Sync linux/vhost.h with the kernel sources
  tools include uapi: Sync linux/fs.h copy with the kernel sources
  perf beauty: Switch from using uapi/linux/fs.h to uapi/linux/mount.h
  tools include uapi: Grab a copy of linux/mount.h
  perf top: Lift restriction on using callchains without "sym" in --sort
  tools lib traceevent: Remove tep_data_event_from_type() API
  tools lib traceevent: Rename tep_is_file_bigendian() to tep_file_bigendian()
  tools lib traceevent: Changed return logic of tep_register_event_handler() API
  tools lib traceevent: Changed return logic of trace_seq_printf() and trace_seq_vprintf() APIs
  tools lib traceevent: Rename struct cmdline to struct tep_cmdline
  tools lib traceevent: Initialize host_bigendian at tep_handle allocation
  tools lib traceevent: Introduce new libtracevent API: tep_override_comm()
  perf tests: Add a test for the ARM 32-bit [vectors] page
  perf tools: Make find_vdso_map() more modular
  perf trace: Fix alignment for [continued] lines
  perf trace: Fix ')' placement in "interrupted" syscall lines
  ...

x86/kvm/nVMX: don't skip emulated instruction twice when vmptr address is not backed

Since commit 09abb5e3e5e50 ("KVM: nVMX: call kvm_skip_emulated_instruction
in nested_vmx_{fail,succeed}") nested_vmx_failValid() results in
kvm_skip_emulated_instruction() so doing it again in handle_vmptrld() when
vmptr address is not backed is wrong, we end up advancing RIP twice.

Fixes: fca91f6d60b6e ("kvm: nVMX: Set VM instruction error for VMPTRLD of unbacked page")
Reported-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Sean Christopherson <sean.j.christopherson@intel.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>

Documentation/virtual/kvm: Update URL for AMD SEV API specification

The URL of [api-spec] in Documentation/virtual/kvm/amd-memory-encryption.rst
is no longer valid, replaced space with underscore.

Signed-off-by: Christophe de Dinechin <dinechin@redhat.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>

KVM/VMX: Avoid return error when flush tlb successfully in the hv_remote_flush_tlb_with_range()

The "ret" is initialized to be ENOTSUPP. The return value of
__hv_remote_flush_tlb_with_range() will be Or with "ret" when ept
table potiners are mismatched. This will cause return ENOTSUPP even if
flush tlb successfully. This patch is to fix the issue and set
"ret" to 0.

Fixes: a5c214dad198 ("KVM/VMX: Change hv flush logic when ept tables are mismatched.")
Signed-off-by: Lan Tianyu <Tianyu.Lan@microsoft.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>

kvm: sev: Fail KVM_SEV_INIT if already initialized

By code inspection, it was found that multiple calls to KVM_SEV_INIT
could deplete asid bits and overwrite kvm_sev_info's regions_list.

Multiple calls to KVM_SVM_INIT is not likely to occur with QEMU, but this
should likely be fixed anyway.

This code is serialized by kvm->lock.

Fixes: 1654efcbc431 ("KVM: SVM: Add KVM_SEV_INIT command")
Reported-by: Cfir Cohen <cfir@google.com>
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>

KVM: validate userspace input in kvm_clear_dirty_log_protect()

The function at issue does not fully validate the content of the
structure pointed by the log parameter, though its content has just been
copied from userspace and lacks validation. Fix that.

Moreover, change the type of n to unsigned long as that is the type
returned by kvm_dirty_bitmap_bytes().

Signed-off-by: Tomas Bortoli <tomasbortoli@gmail.com>
Reported-by: syzbot+028366e52c9ace67deb3@syzkaller.appspotmail.com
[Squashed the fix from Paolo. - Radim.]
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>

KVM: x86: Fix bit shifting in update_intel_pt_cfg

ctl_bitmask in pt_desc is of type u64. When an integer like 0xf is
being left shifted more than 32 bits, the behavior is undefined.

Fix this by adding suffix ULL to integer 0xf.

Addresses-Coverity-ID: 1476095 ("Bad bit shift operation")
Fixes: 6c0f0bba85a0 ("KVM: x86: Introduce a function to initialize the PT configuration")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Wei Yang <richardw.yang@linux.intel.com>
Reviewed-by: Luwei Kang <luwei.kang@intel.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>

Merge branch 'x86-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull x86 fixes from Ingo Molnar:
"A 32-bit build fix, CONFIG_RETPOLINE fixes and rename CONFIG_RESCTRL
  to CONFIG_X86_RESCTRL"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, modpost: Replace last remnants of RETPOLINE with CONFIG_RETPOLINE
  x86/cache: Rename config option to CONFIG_X86_RESCTRL
  samples/seccomp: Fix 32-bit build

Merge tag 'acpi-5.0-rc2' of git://git./linux/kernel/git/rafael/linux-pm

Pull ACPI fixes from Rafael Wysocki:
"Fix a build failure introduced recently, fix the xpower PMIC ACPI
  driver, clean up the handling of duplicate entries in _PRx power
  resource lists and fix addresses in NUMA-related messages on 32-bit
  with PAE.

  Specifics:

   - Fix build failures with both CONFIG_NLS and CONFIG_PCI unset that
     can occur since ACPI can be built without PCI now (Sinan Kaya).

   - Clean up the handling of duplicate entries in power resource lists
     returned by _PRx evaluation to avoid triggering WARN_ON() on
     attempts to add duplicate symlinks in sysfs (Hans de Goede).

   - Fix issues with the TS current-source switching on systems using
     the xpower PMIC by avoiding to update unrelated bits in the TS
     pin-ctrl register and avoiding to unconditionally enable TS
     current-source on systems where it is not used (Hans de Goede).

   - Fix addresses in NUMA-related messages on 32-bit with PAE which can
     be truncated due to integer type conversions (Chao Fan)"

* tag 'acpi-5.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI / PMIC: xpower: Fix TS-pin current-source handling
  ACPI: NUMA: Use correct type for printing addresses on i386-PAE
  ACPI: power: Skip duplicate power resource references in _PRx
  ACPI: Fix build failure when CONFIG_NLS is set to 'n'

Merge tag 'pm-5.0-rc2' of git://git./linux/kernel/git/rafael/linux-pm

Pull power management updates from Rafael Wysocki:
"These fix fallout after starting to use hrtimers in the runtime PM
  framework, fix a few cpufreq issues, fix a recently broken reference
  to cpuidle documentation, update MAINTAINERS entries for cpufreq and
  cpuidle and make the recently added system suspend and resume support
  in devfreq actually work.

  Specifics:

   - Prevent integer overflows from occurring on 32-bit when converting
     milliseconds to nanoseconds in the runtime PM framework and update
     comments that still refer to jiffies in it (Vincent Guittot,
     Ladislav Michl).

   - Fix the SCMI cpufreq driver to always use the same frequency units
     for arch_set_freq_scale() and make the scale-invariant load
     tracking acutally work with this driver (Quentin Perret).

   - Fix freeing of dynamic OPPs in the SCPI and SCMI cpufreq drivers
     broken during the 4.20 defelopment cycle (Viresh Kumar).

   - Prevent the cpufreq core from attempting to return the current
     frequency of offline CPUs (Sudeep Holla).

   - Add devfreq suspend and resume hooks (missed previously) to the PM
     core to make the recently added system suspend and resume support
     in devfreq actually work (Lukasz Luba).

   - Update MAINTAINERS entries for cpufreq and cpuidle, mostly to add
     references to new/current documentation to them (Rafael Wysocki).

   - Fix a recently broken reference to cpuidle documentation (Otto
     Sabart)"

* tag 'pm-5.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  PM-runtime: Fix autosuspend_delay on 32bits arch
  PM-runtime: Fix 'jiffies' in comments after switch to hrtimers
  cpufreq: scmi: Fix frequency invariance in slow path
  doc: trace: fix reference to cpuidle documentation file
  cpufreq: check if policy is inactive early in __cpufreq_get()
  cpufreq: scpi/scmi: Fix freeing of dynamic OPPs
  cpuidle / Documentation: Update cpuidle MAINTAINERS entry
  cpufreq / Documentation: Update cpufreq MAINTAINERS entry
  PM: sleep: call devfreq suspend/resume

Merge tag 'drm-fixes-2019-01-11' of git://anongit.freedesktop.org/drm/drm

Pull drm fixes from Dave Airlie:
"Not a huge amount for rc2, assume the usual quiet period, and rc3 will
  be most of it.

  amdgpu:
   - Powerplay fixes
   - Virtual display pinning fixes
   - Golden register updates for Vega
   - Pitch and gem size validation fixes
   - SR-IOV init error fix
   - Pagetables in system RAM disable for some Raven system
   - DP-MST resume fixes

  tc358767 bridge:
   - fix to work with displayport connector"

* tag 'drm-fixes-2019-01-11' of git://anongit.freedesktop.org/drm/drm: (26 commits)
  drm/amdgpu: disable system memory page tables for now
  drm/amdgpu: set WRITE_BURST_LENGTH to 64B to workaround SDMA1 hang
  drm/amdgpu: fix CPDMA hang in PRT mode for VEGA20
  drm/bridge: tc358767: use DP connector if no panel set
  drm/bridge: tc358767: fix output H/V syncs
  drm/bridge: tc358767: reject modes which require too much BW
  drm/bridge: tc358767: fix initial DP0/1_SRCCTRL value
  drm/bridge: tc358767: fix single lane configuration
  drm/bridge: tc358767: add defines for DP1_SRCCTRL & PHY_2LANE
  drm/bridge: tc358767: add bus flags
  drm/dp_mst: Add __must_check to drm_dp_mst_topology_mgr_resume()
  drm/amdgpu: Don't fail resume process if resuming atomic state fails
  drm/amdgpu: Don't ignore rc from drm_dp_mst_topology_mgr_resume()
  drm/amdgpu: validate user GEM object size
  drm/amdgpu: validate user pitch alignment
  drm/amd/powerplay: drop the unnecessary uclk hard min setting
  drm/amd/powerplay: avoid possible buffer overflow
  drm/amd/powerplay: create pp_od_clk_voltage device file under OD support
  drm/amd/powerplay: update OD support flag for SKU with no OD capabilities
  drm/amdgpu: make gfx9 enter into rlc safe mode when set MGCG
  ...

tty: Don't hold ldisc lock in tty_reopen() if ldisc present

Try to get reference for ldisc during tty_reopen().
If ldisc present, we don't need to do tty_ldisc_reinit() and lock the
write side for line discipline semaphore.
Effectively, it optimizes fast-path for tty_reopen(), but more
importantly it won't interrupt ongoing IO on the tty as no ldisc change
is needed.
Fixes user-visible issue when tty_reopen() interrupted login process for
user with a long password, observed and reported by Lukas.

Fixes: c96cf923a98d ("tty: Don't block on IO when ldisc change is pending")
Fixes: 83d817f41070 ("tty: Hold tty_ldisc_lock() during tty_reopen()")
Cc: Jiri Slaby <jslaby@suse.com>
Reported-by: Lukas F. Hartmann <lukas@mntmn.com>
Tested-by: Lukas F. Hartmann <lukas@mntmn.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: core: don't override the CD GPIO level when "cd-inverted" is set

Since commit 89a5e15bcba87d ("gpio/mmc/of: Respect polarity in the device
tree") gpiolib-of parses the "cd-gpios" property and flips the polarity
if "cd-inverted" is also set. This results in the "cd-inverted" property
being evaluated twice, which effectively makes it a no-op:
- first in drivers/gpio/gpiolib-of.c (of_xlate_and_get_gpiod_flags) when
setting up the CD GPIO
- then again in drivers/mmc/core/slot-gpio.c (mmc_gpio_get_cd) when
reading the CD GPIO value at runtime

On boards which are using device-tree with the "cd-inverted" property
being set any inserted card are not detected anymore. This is due to the
MMC core treating the CD GPIO with the wrong polarity.

Disable "override_cd_active_level" for the card detection GPIO which is
parsed using mmc_of_parse. This fixes SD card detection on the boards
which are currently using the "cd-inverted" device-tree property (tested
on Meson8b Odroid-C1 and Meson8b EC-100).

This does not remove the CD GPIO inversion logic from the MMC core
because there's at least one driver (sdhci-pci-core for Intel BayTrail
based boards) which still passes "override_cd_active_level = true" to
mmc_gpiod_request_cd(). Due to lack of hardware for testing this is left
untouched.
In the future the GPIO inversion logic for both, card and read-only
detection can be removed once no driver is using it anymore.

Fixes: 89a5e15bcba87d ("gpio/mmc/of: Respect polarity in the device tree")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Tested-by: Anand Moon <linux.amoon@gmail.com>
Tested-by: Loys Ollivier <loys.ollivier@gmail.com>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

cifs: update internal module version number

To 2.16

Signed-off-by: Steve French <stfrench@microsoft.com>

CIFS: Fix error paths in writeback code

This patch aims to address writeback code problems related to error
paths. In particular it respects EINTR and related error codes and
stores and returns the first error occurred during writeback.

Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Acked-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>

CIFS: Move credit processing to mid callbacks for SMB3

Currently we account for credits in the thread initiating a request
and waiting for a response. The demultiplex thread receives the response,
wakes up the thread and the latter collects credits from the response
buffer and add them to the server structure on the client. This approach
is not accurate, because it may race with reconnect events in the
demultiplex thread which resets the number of credits.

Fix this by moving credit processing to new mid callbacks that collect
credits granted by the server from the response in the demultiplex thread.

Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>