ARM64: tizen_bcmrpi3_defconfig: enable SMACK_NETFILTER

On Tizen, nether service is failed because security smack netfilter
related configs are not enabled. So, enable related configs
including CONFIG_NETWORK_SECMARK, and CONFIG_SECURITY_SMACK_NETFILTER
and others.

Change-Id: Ia886ba9d5dd9bc559633acf3066818e57551f8f4
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>

ARM: dts: bcm2710-rpi-3-b : Change audio node status as "okay"

Start.elf uses dt overlay concept, so each node status can be
overlayed with dtparam=audio=on in config.txt but u-boot does not.
So, change status of on-board audio dt node as "okay" because dt
overlay concept on u-boot requires too huge effort.

Fixing dts file from arm will also change arm64 because arm64 dts
includes arm dts.

Change-Id: I73b3c807968c031ba046f44e937c6828ee7f0119
Signed-off-by: Hackseung Lee <lhs@dignsys.com>
[jcsing.lee@samsung.com: modify commit message more clearly]
Signed-off-by: Jaechul Lee <jcsing.lee@samsung.com>

arm64: bcmrpi3_defconfig: Enable features related to bcm sound

Enable SND_BCM2835 that has essential functionalities to
play and capture sounds and enable configurations related to PWM
because earjack works through PWM devices.

Change-Id: I04f7ea23b9bdd447a7f8084d8ce5c6f73ebd9992
Signed-off-by: Hackseung Lee <lhs@dignsys.com>
[jcsing.lee@samsung.com: modify commit message more clearly]
Signed-off-by: Jaechul Lee <jcsing.lee@samsung.com>

ARM64: tizen_bcmrpi3_defconfig: enable android logger

To support logger driver backend from Tizen dlog framework, enable
android logger.

Change-Id: I24960463efc40637858c0873ac7400fa0e806650
Signed-off-by: Karol Lewandowski <k.lewandowsk@samsung.com>

staging: logger: fix build error due to removed ki_nbytes

This patch fixes build error. Logger driver was removed
from mainline kernel and after that there was some changes and
one of them is that ki_nbytes member was removed from kiocb structure.
66ee59a fs: remove ki_nbytes

This patch makes count member of iov_iter structure to be used instead.

Change-Id: I11e9ebdac7dd86c02fd692a67562a23e5c685f69
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Karol Lewandowski <k.lewandowsk@samsung.com>

staging: android: logger: fix the compiler error

Moved signal wakeup & sigpending methods from <linux/sched.h> into
<linux/sched/signal.h>.

Refer to commit 174cd4b1e5fb (sched/headers: Prepare to move signal
wakeup & sigpending methods from <linux/sched.h> into <linux/sched/signal.h>

Fix the compiler error about android logger.

Change-Id: Iab1583fe54fef1c76a34673d1d718f73930baa11
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>

Revert "staging: Remove logger and alarm-dev from android Makefile"

This reverts commit 71e365ed0ca893cae8d72cbd4b476a9589003098.

Change-Id: I190dabd2626ca7cb51d00d9fe186d15da21ae405
Signed-off-by: Karol Lewandowski <k.lewandowsk@samsung.com>

Revert "staging: Remove the Android logger driver"

This reverts commit a0a23bbce7818c90c3d3370af966fefce07a8c9b.

rpi3 is going to be used for various profiles - among these
there will be IoT and Headless, which still depend on legacy
android logger driver for application logging.

This commit reverts removal of the driver.

Change-Id: I61ab9e87c5bcbf318aa35ec2f92a470b54a98be1
Requested-by: Hyotaek Shim <hyotaek.shim@samsung.com>
Signed-off-by: Karol Lewandowski <k.lewandowsk@samsung.com>

ARM64: tizen_bcmrpi3_defconfig: update the defconfig for synchronization

It updates the defconfig for synchronization.

Change-Id: I2f1b2aa7cdcc82c0df0407cde155569884181471
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>

ARM64: tizen_bcmrpi3_defconfig: enable BLUETOOTH

Activate Bluetooth related settings.

Change-Id: I6c9496341698aadc66934ab93a3b54d2f82894ad
Signed-off-by: Hackseung Lee <lhs@dignsys.com>

ARM64: tizen_bcmrpi3_defconfig: enable UVC

Activate all settings related to UVC(USB Video Class)

Change-Id: I6d5d3d388d06fc4b5ae9510db63f4398f8fe84fe
Signed-off-by: Hackseung Lee <lhs@dignsys.com>

ARM64: tizen_bcmrpi3_defconfig: enable USB audio driver

Activate ALSA USB related settings.

Change-Id: I03d6c9cd9eb6e55667f7bd92717b6beeb304aa1b
Signed-off-by: Hackseung Lee <lhs@dignsys.com>
[jcsing.lee: adjust commit message]
Signed-off-by: Jaechul Lee <jcsing.lee@samsung.com>

ARM64: tizen_bcmrpi3_defconfig: enable GPIO_BCM_EXP

VC4 DRM hdmi uses HPD gpio controlled by Broadcom expander GPIO driver,
so enable GPIO_BCM_EXP config.

Change-Id: I1457a0d2d9d071363eb2f43225a308eeeaaa3353
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>

ARM64: tizen_bcmrpi3_defconfig: enable INPUT_EVDEV

Tizen needs the dev/input/eventX to interface for with the mouse,
INPUT_EVDEV enables it.

Change-Id: I3a9566a10b8764fe5af21fc6b1361cf9e8040a23
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Andi Shyti <andi.shyti@samsung.com>

ARM64: tizen_bcmrpi3_defconfig: enable SPI_BCM2835

Enables support of BCM2835 SPI driver needed by peripheral-io.

Change-Id: Ibf2aaca64462e4046ba155d11783f19f912ef8c3
Signed-off-by: Hyeongsik Min <hyeongsik.min@samsung.com>

ARM64: tizen_bcmrpi3_defconfig: increase the ramdisk size to 12MB

Increase the ramdisk size from 4MB to 12MB. Tizen normal ramdisk
size should be under 8MB and the size of ramdisk-recovery should
be 12MB.

Change-Id: I474a32f8fb1233d36b837806dde54e376a0cafdd
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
[sw0312.kim: squash change size for 8MB and 12MB]
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>

ARM64: tizen_bcmrpi3_defcofig: enable audit subsystem

Syscall auditing is going to be used by fault detection service - faultd.

Change-Id: Ifc6853e12fcc90497bd8a222eecb44fdd09f57ba
Signed-off-by: Karol Lewandowski <k.lewandowsk@samsung.com>

ARM64: tizen_bcmrpi3_defcofig: enable the configs relevant to bridge

Enable the configs relevant to BRIDGE and STP.

Change-Id: Iabb67ec49d176ff5fe6083dfc4a48ed40d683d1a
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>

ARM64: tizen_bcmrpi3_defconfig: enable the MAC80211 and RT2X00 configs

To use Ralink driver, enable the configurations relevant to it.

Change-Id: I5122405b297caf1f6f1e56d02a524d504671d910
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>

ARM64: tizen_bcmrpi3_defconfig: Enable USB_SERIAL configurations

Enable USB_SERIAL configurations.
(CONFIG_SERIAL, CONFIG_SERIAL_GENERIC, CONFIG_SERIAL_CP210X)

Change-Id: Icead3fc34b2e37889a1dd407c24aff1444a5ab20
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>

drm/vc4: add gem_info node via debugfs

The memps requires gem_info with gem_names to analyze graphics
shared memory, so this patch adds gem_info node via debugfs
interface.

Let's save pid/tgid in private file data only once when gem object is
created or prime_fd is imported and use them on gem_info. This is to
solve the wrong pid problem of gem_info created as different processes
share fd of drm device node.

Change-Id: Iaac2ccd63e124dd11a894f0e88ddbb533750f3d4
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
[sw0312.kim: fix wrong printing format in gem_info debugfs for 32bit arm build with %zx]
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>

ARM64: tizen_bcmrpi3_defconfig: enable I2C_CHARDEV

The I2C_CHARDEV flag enables the compilation of the i2c-dev
driver which generates a character device of the type /dev/i2c-X
where userspace programs can access to the i2c devices without
the support of any device drivers.

Change-Id: I661d8590bc219c6500bb5fca89df0436aa0efdca
Signed-off-by: Andi Shyti <andi.shyti@samsung.com>

ARM64: dts: bcm2710-rpi-3-b: enable i2c1

i2c bus number 1 is mapped in the Raspberry Pi gpio array for
connecting through i2c external devices.

Change-Id: Ia8f72952f4aed1d737ab75c239ead25bb97d2e3c
Signed-off-by: Andi Shyti <andi.shyti@samsung.com>

ARM64: rpi3: config: enable configurations relevant to WiFi

Enable configurations relevant to WiFi.
These configurations are basic configs for using Network.
If needs to enable more configuration, it should be enabled in future.

To use WiFi, enable the brcmfmac driver as modules.
(Needs to install modules in target.)

Change-Id: Ia9961018f6736e3bc709c0d760f0d2d02994c7c8
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>

ARM64: tizen_bcmrpi3_defconfig: Disable FB_BCM2708

Disable FB driver because of using DRM driver.

Change-Id: I3bfb899c1e0c71a235952934ecaf749a1d90dd85
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>

ARM64: tizen_bcmrpi3_defconfig: increase CMA size to 256MiB

CMA size 5MiB or 64MiB are insufficient in tizen platform.

Change-Id: I83fa78d12af93361a87f0819b7b7abcd5b23fb2e
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>

ARM64: tizen_bcmrpi3_defconfig: Enable I2C_BCM2835

It needs to enable I2C_BCM2835 to bind HDMI from drm driver.

Change-Id: Ifcfbcb7bd3ac5a76c2cbbb1acdec45a48bee0201
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>

ARM64: tizen_bcmrpi3_defconfig: Enable DRM_VC4

Enable DRM_VC4 driver for tizen platform.

v2: DRM_VC4 need also to enable SND and SND_SOC configs.

Change-Id: I85568d78710d81ffa4cb1ec6373647e31962d1fe
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>

arm: dts: Add support for drm vc4 on RPI3

Fixed the DT status to operate drm vc4.

Change-Id: I06aa84303e1a7c10647ace3799ec09d08ca045eb
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>

scripts: mkbootimg_rpi3.sh: Add u-boot and optee binaries to boot.img

In boot.img for tizen rpi3 image, u-boot and optee atf binaries
are required, so the files should be also installed in boot.img.
Add u-boot.img with optee os for atf and u-boot received from
download.tizen.org to boot.img.

Change-Id: I9778ea5c72697c3e7d0a534627fc65841bb792a1
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>

scripts: mkbootimg_rpi3.sh: Add ARM64 kernel/dtb binary to boot.img

Add script to create boot.img having boot related files with fat
file system.

Change-Id: I7a03c11ef155dd3ad5fc935511ae764ef699c145
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
[sw0312.kim: remove not required kernel.img and add sync command before umount]
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>

scripts: Add mkbootimg_rpi3.sh

This script is to make boot.img that is fused at boot partition.

Change-Id: I383fc8dee8460176c825e4ea360d37d62072e6d6
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>

tools: Add build script for ARM64 kernel of rpi3

This patch adds build script to build the ARM64 kernel for rpi3 board.

v2: Remove codes for creating fit style image from its

Change-Id: Ie7fa6dbf0b6838832b6a05326fa0ca27e3a7a812
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>

packaging: Added '.gbs.conf' for partial build

Added gbs configuration file for enhanced building.
it makes gbs build faster than before.

https://source.tizen.org/documentation/reference/git-build-system/maintenance-models-supported-gbs

Change-Id: I79d57aa5eb49d0fbfa9a3744ec2acb032a274e5e
Signed-off-by: Jaechul Lee <jcsing.lee@samsung.com>
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>

packaging: Disable UBSan build

UBSan build on kernel will cause build error because kernel has its own
sanitizer build options. So, dislable UBSan build from packaging spec.

Change-Id: Ife910a1e666c6fcafb7ef7bfcc072d88d8549d77
Signed-off-by: Denis Khalikov <d.khalikov@partner.samsung.com>
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>

packaging: Turn off building with ASan

Turn off ASan for ASan sanitized firmware build

Change-Id: If786306821ff22e994efaba2b00dcabcc5eb8426
Signed-off-by: Gonzha Dmitriy Evgenevich <d.gonzha@samsung.com>
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>

packaging: Add kernel devel package

Kernel devel is used now to build out-of-tree kernel modules

Change-Id: I753edba92042561b50dc6c645f23659a65568976
Signed-off-by: Alexander Aksenov <a.aksenov@samsung.com>

packaging: Add spec file for rpi

This adds linux-rpi3.spec file for ARM64/armv7l rpm packaging.

Change-Id: I428fd32b69d082d935159476ace30c59c14b570d
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
[jh80.chung, sw0312.kim: Update kernel version to v4.14.y in spec file]
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
[sw0312.kim: Rename spec file without arch name]
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>

ARM64: tizen_bcmrpi3_defconfig: Enable SMACK

It needs to enable configs related with SMACK for booting tizen
platform.

Change-Id: If58917b798c1bee0c16cd5e430a065e40852b97b
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>

ARM64: tizen_bcmrpi3_defconfig: Sync with .config

Change-Id: I4e11df92a40b5f4c48891a6e772d898ff58de6e8
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>

rpi3: config: Enable camera

Add configration to enable the Raspberry Pi Camera Module in config.txt file.

Change-Id: I092851a559ebab462babf8c176a190339285ef9d
Signed-off-by: Hackseung Lee <lhs@dignsys.com>

rpi3: enable jtag gpio option

Enable jtag gpio option at 1st bootloader level. The option
enables jtag gpio as alt4 mode as like following:
 GPIO22 - PIN13 - TRST
 GPIO23 - PIN16 - RTCK
 GPIO24 - PIN18 - TDO
 GPIO25 - PIN22 - TCK
 GPIO26 - PIN37 - TDI
 GPIO27 - PIN07 - TMS

This is requested for debugging secure world with jtag.

Change-Id: I0e25dd9ecf95fa003e56eb73eae5a668a1f6e3ba
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>

rpi3: Enable ARM atf boot for rpi3

Boot rpi3 with u-boot-spl.bin which enables ARM atf.
Other booting options are set as like:
https://github.com/OP-TEE/build/blob/master/rpi3/firmware/config.txt

Change-Id: I0c0559c3f72f252c2cd2716b746b3c49b04fd63e
Signed-off-by: Rafal Tyminski <r.tyminski@partner.samsung.com>
[sw0312.kim: add more options and adjust commit-msg]
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>

rpi3: enable uart in bootcode.bin

The uart_2ndstage option directs bootcode.bin to print some diagnostics,
that indicate the code is running.

Change-Id: I34a68ae3b5c2467ee58fd81adf687ce367e1ed1c
Signed-off-by: Łukasz Stelmach <l.stelmach@samsung.com>

rpi3: config: change the 'kernel' parameter from Image to u-boot.bin

It needs to use the u-boot for supporting ramdisk booting.
Current release image is including the u-boot.bin that modified the ramdisk
booting sequence.

Change the kernel parameter from "Image" to "u-boot.bin" in config.txt.

Change-Id: Icc4ddce7e9f9befba59240d02ddd9af111c92a40
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>

rpi3: config: Enable SPI interface

Uncomment spi=on in config.txt file to enable SPI interface.

Change-Id: I595628838fe9d769b243948e7118d36f4647e490
Signed-off-by: Hyeongsik Min <hyeongsik.min@samsung.com>

rpi3: config: Add loading of arm64 kernel binary & dtb

Change-Id: Ib553d02595e357751d0080d6aa713efe1ce9515d
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>

rpi3: config: Add boot mode to select ARM or ARM64

Add configration to select boot mode in config.txt file, then we can
determine booting in 32-bit mode or 64-bit mode.

Change-Id: I2a5a1b11c4c83f514a7e8cc4c2f077b0b1d02cdc
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>

rpi3: config: Enable serial

Add configration to enable serial in config.txt file, then we can serial
log from kernel or u-boot during booting.

Change-Id: Iebe3345b52cb2886daa0d8bdf1e15747dde2af39
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>

rpi3: Add config.txt extracted from raspbian lite binary

We can get raspbian lite binary from
https://downloads.raspberrypi.org/raspbian_lite_latest

This file that is necessary for booting was extracted from first
partition of 2017-07-05-raspbian-jessie-lite.img.

Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>

rpi3: Add boot files from github

We can get boot binaries that are necessary for booting from master
branch of https://github.com/raspberrypi/firmware.

The git base is the commit 83977fe3b6ef ("kernel: Bump to 4.14.98").

LICENCE.broadcom
bootcode.bin
fixup*.dat
start*.elf

TYPES of each firmware:
start.elf       / fixup.dat     - normal
start_x.elf     / fixup_x.dat   - with extra feature including camera (start_x=1 in config.txt)
start_cd.elf    / fixup_cd.dat  - cut-down to minimum gpu set 16M
start_db.elf    / fixup_db.dat  - debug (start_debug=1 in config.txt)

NOTE:
start_x=1 in config.txt should be specified when using the camera
module and it implies start_file=start_x.elf/fixup_file=fixup_x.dat.

Change-Id: I827b4cb94b3f8baa805938cd9f44947be7865f0e
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
[lhs: Add firmware files for camera]
Signed-off-by: Hackseung Lee <lhs@dignsys.com>
[sw0312.kim: update firmware files including extra, cutdown and debug features]
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>

overlays: Add missing rpi-poe parameters

The rpi-poe fan overlay has gained two more fan speeds and adjusted
the thresholds and hystereses.

Signed-off-by: Phil Elwell <phil@raspberrypi.com>

Merge remote-tracking branch 'stable/linux-4.19.y' into rpi-4.19.y

Reduce noise from rpi poe hat fan

This adds 2 extra states, at 40c and 45c, with PWM of 31 and 63 (out
of 255) for the rpi poe hat fan.  This significantly improves user
experience by providing a smoother ramp up of the fan, from a pwm 0
to 31 to 63 then finally to 150, and additionally makes it very easy
for users to further tweak the values as needed for their specific
application.

The possible concerns I have are that a hysteresis of 2000 (2c) could
be too narrow, and that running the fan more at a reduced temperature
(40000 - 40c) could cause problems.

Signed-off-by: Nick B <nick@pelagiris.org>

Linux 4.19.113

staging: greybus: loopback_test: fix potential path truncations

commit ae62cf5eb2792d9a818c2d93728ed92119357017 upstream.

Newer GCC warns about possible truncations of two generated path names as
we're concatenating the configurable sysfs and debugfs path prefixes
with a filename and placing the results in buffers of the same size as
the maximum length of the prefixes.

snprintf(d->name, MAX_STR_LEN, "gb_loopback%u", dev_id);

snprintf(d->sysfs_entry, MAX_SYSFS_PATH, "%s%s/",
 t->sysfs_prefix, d->name);

snprintf(d->debugfs_entry, MAX_SYSFS_PATH, "%sraw_latency_%s",
 t->debugfs_prefix, d->name);

Fix this by separating the maximum path length from the maximum prefix
length and reducing the latter enough to fit the generated strings.

Note that we also need to reduce the device-name buffer size as GCC
isn't smart enough to figure out that we ever only used MAX_STR_LEN
bytes of it.

Fixes: 6b0658f68786 ("greybus: tools: Add tools directory to greybus repo and add loopback")
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20200312110151.22028-4-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: greybus: loopback_test: fix potential path truncation

commit f16023834863932f95dfad13fac3fc47f77d2f29 upstream.

Newer GCC warns about a possible truncation of a generated sysfs path
name as we're concatenating a directory path with a file name and
placing the result in a buffer that is half the size of the maximum
length of the directory path (which is user controlled).

loopback_test.c: In function 'open_poll_files':
loopback_test.c:651:31: warning: '%s' directive output may be truncated writing up to 511 bytes into a region of size 255 [-Wformat-truncation=]
  651 |   snprintf(buf, sizeof(buf), "%s%s", dev->sysfs_entry, "iteration_count");
      |                               ^~
loopback_test.c:651:3: note: 'snprintf' output between 16 and 527 bytes into a destination of size 255
  651 |   snprintf(buf, sizeof(buf), "%s%s", dev->sysfs_entry, "iteration_count");
      |   ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Fix this by making sure the buffer is large enough the concatenated
strings.

Fixes: 6b0658f68786 ("greybus: tools: Add tools directory to greybus repo and add loopback")
Fixes: 9250c0ee2626 ("greybus: Loopback_test: use poll instead of inotify")
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20200312110151.22028-3-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/bridge: dw-hdmi: fix AVI frame colorimetry

commit e8dca30f7118461d47e1c3510d0e31b277439151 upstream.

CTA-861-F explicitly states that for RGB colorspace colorimetry should
be set to "none". Fix that.

Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Fixes: def23aa7e982 ("drm: bridge: dw-hdmi: Switch to V4L bus format and encodings")
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20200304232512.51616-2-jernej.skrabec@siol.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: smp: fix crash_smp_send_stop() behaviour

commit f50b7dacccbab2b9e3ef18f52a6dcc18ed2050b9 upstream.

On a system configured to trigger a crash_kexec() reboot, when only one CPU
is online and another CPU panics while starting-up, crash_smp_send_stop()
will fail to send any STOP message to the other already online core,
resulting in fail to freeze and registers not properly saved.

Moreover even if the proper messages are sent (case CPUs > 2)
it will similarly fail to account for the booting CPU when executing
the final stop wait-loop, so potentially resulting in some CPU not
been waited for shutdown before rebooting.

A tangible effect of this behaviour can be observed when, after a panic
with kexec enabled and loaded, on the following reboot triggered by kexec,
the cpu that could not be successfully stopped fails to come back online:

[  362.291022] ------------[ cut here ]------------
[  362.291525] kernel BUG at arch/arm64/kernel/cpufeature.c:886!
[  362.292023] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
[  362.292400] Modules linked in:
[  362.292970] CPU: 3 PID: 0 Comm: swapper/3 Kdump: loaded Not tainted 5.6.0-rc4-00003-gc780b890948a #105
[  362.293136] Hardware name: Foundation-v8A (DT)
[  362.293382] pstate: 200001c5 (nzCv dAIF -PAN -UAO)
[  362.294063] pc : has_cpuid_feature+0xf0/0x348
[  362.294177] lr : verify_local_elf_hwcaps+0x84/0xe8
[  362.294280] sp : ffff800011b1bf60
[  362.294362] x29: ffff800011b1bf60 x28: 0000000000000000
[  362.294534] x27: 0000000000000000 x26: 0000000000000000
[  362.294631] x25: 0000000000000000 x24: ffff80001189a25c
[  362.294718] x23: 0000000000000000 x22: 0000000000000000
[  362.294803] x21: ffff8000114aa018 x20: ffff800011156a00
[  362.294897] x19: ffff800010c944a0 x18: 0000000000000004
[  362.294987] x17: 0000000000000000 x16: 0000000000000000
[  362.295073] x15: 00004e53b831ae3c x14: 00004e53b831ae3c
[  362.295165] x13: 0000000000000384 x12: 0000000000000000
[  362.295251] x11: 0000000000000000 x10: 00400032b5503510
[  362.295334] x9 : 0000000000000000 x8 : ffff800010c7e204
[  362.295426] x7 : 00000000410fd0f0 x6 : 0000000000000001
[  362.295508] x5 : 00000000410fd0f0 x4 : 0000000000000000
[  362.295592] x3 : 0000000000000000 x2 : ffff8000100939d8
[  362.295683] x1 : 0000000000180420 x0 : 0000000000180480
[  362.296011] Call trace:
[  362.296257]  has_cpuid_feature+0xf0/0x348
[  362.296350]  verify_local_elf_hwcaps+0x84/0xe8
[  362.296424]  check_local_cpu_capabilities+0x44/0x128
[  362.296497]  secondary_start_kernel+0xf4/0x188
[  362.296998] Code: 52805001 72a00301 6b01001f 54000ec0 (d4210000)
[  362.298652] SMP: stopping secondary CPUs
[  362.300615] Starting crashdump kernel...
[  362.301168] Bye!
[    0.000000] Booting Linux on physical CPU 0x0000000003 [0x410fd0f0]
[    0.000000] Linux version 5.6.0-rc4-00003-gc780b890948a (crimar01@e120937-lin) (gcc version 8.3.0 (GNU Toolchain for the A-profile Architecture 8.3-2019.03 (arm-rel-8.36))) #105 SMP PREEMPT Fri Mar 6 17:00:42 GMT 2020
[    0.000000] Machine model: Foundation-v8A
[    0.000000] earlycon: pl11 at MMIO 0x000000001c090000 (options '')
[    0.000000] printk: bootconsole [pl11] enabled
.....
[    0.138024] rcu: Hierarchical SRCU implementation.
[    0.153472] its@2f020000: unable to locate ITS domain
[    0.154078] its@2f020000: Unable to locate ITS domain
[    0.157541] EFI services will not be available.
[    0.175395] smp: Bringing up secondary CPUs ...
[    0.209182] psci: failed to boot CPU1 (-22)
[    0.209377] CPU1: failed to boot: -22
[    0.274598] Detected PIPT I-cache on CPU2
[    0.278707] GICv3: CPU2: found redistributor 1 region 0:0x000000002f120000
[    0.285212] CPU2: Booted secondary processor 0x0000000001 [0x410fd0f0]
[    0.369053] Detected PIPT I-cache on CPU3
[    0.372947] GICv3: CPU3: found redistributor 2 region 0:0x000000002f140000
[    0.378664] CPU3: Booted secondary processor 0x0000000002 [0x410fd0f0]
[    0.401707] smp: Brought up 1 node, 3 CPUs
[    0.404057] SMP: Total of 3 processors activated.

Make crash_smp_send_stop() account also for the online status of the
calling CPU while evaluating how many CPUs are effectively online: this way
the right number of STOPs is sent and all other stopped-cores's registers
are properly saved.

Fixes: 78fd584cdec05 ("arm64: kdump: implement machine_crash_shutdown()")
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: smp: fix smp_send_stop() behaviour

commit d0bab0c39e32d39a8c5cddca72e5b4a3059fe050 upstream.

On a system with only one CPU online, when another one CPU panics while
starting-up, smp_send_stop() will fail to send any STOP message to the
other already online core, resulting in a system still responsive and
alive at the end of the panic procedure.

[  186.700083] CPU3: shutdown
[  187.075462] CPU2: shutdown
[  187.162869] CPU1: shutdown
[  188.689998] ------------[ cut here ]------------
[  188.691645] kernel BUG at arch/arm64/kernel/cpufeature.c:886!
[  188.692079] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
[  188.692444] Modules linked in:
[  188.693031] CPU: 3 PID: 0 Comm: swapper/3 Not tainted 5.6.0-rc4-00001-g338d25c35a98 #104
[  188.693175] Hardware name: Foundation-v8A (DT)
[  188.693492] pstate: 200001c5 (nzCv dAIF -PAN -UAO)
[  188.694183] pc : has_cpuid_feature+0xf0/0x348
[  188.694311] lr : verify_local_elf_hwcaps+0x84/0xe8
[  188.694410] sp : ffff800011b1bf60
[  188.694536] x29: ffff800011b1bf60 x28: 0000000000000000
[  188.694707] x27: 0000000000000000 x26: 0000000000000000
[  188.694801] x25: 0000000000000000 x24: ffff80001189a25c
[  188.694905] x23: 0000000000000000 x22: 0000000000000000
[  188.694996] x21: ffff8000114aa018 x20: ffff800011156a38
[  188.695089] x19: ffff800010c944a0 x18: 0000000000000004
[  188.695187] x17: 0000000000000000 x16: 0000000000000000
[  188.695280] x15: 0000249dbde5431e x14: 0262cbe497efa1fa
[  188.695371] x13: 0000000000000002 x12: 0000000000002592
[  188.695472] x11: 0000000000000080 x10: 00400032b5503510
[  188.695572] x9 : 0000000000000000 x8 : ffff800010c80204
[  188.695659] x7 : 00000000410fd0f0 x6 : 0000000000000001
[  188.695750] x5 : 00000000410fd0f0 x4 : 0000000000000000
[  188.695836] x3 : 0000000000000000 x2 : ffff8000100939d8
[  188.695919] x1 : 0000000000180420 x0 : 0000000000180480
[  188.696253] Call trace:
[  188.696410]  has_cpuid_feature+0xf0/0x348
[  188.696504]  verify_local_elf_hwcaps+0x84/0xe8
[  188.696591]  check_local_cpu_capabilities+0x44/0x128
[  188.696666]  secondary_start_kernel+0xf4/0x188
[  188.697150] Code: 52805001 72a00301 6b01001f 54000ec0 (d4210000)
[  188.698639] ---[ end trace 3f12ca47652f7b72 ]---
[  188.699160] Kernel panic - not syncing: Attempted to kill the idle task!
[  188.699546] Kernel Offset: disabled
[  188.699828] CPU features: 0x00004,20c02008
[  188.700012] Memory Limit: none
[  188.700538] ---[ end Kernel panic - not syncing: Attempted to kill the idle task! ]---

[root@arch ~]# echo Helo
Helo
[root@arch ~]# cat /proc/cpuinfo | grep proce
processor : 0

Make smp_send_stop() account also for the online status of the calling CPU
while evaluating how many CPUs are effectively online: this way, the right
number of STOPs is sent, so enforcing a proper freeze of the system at the
end of panic even under the above conditions.

Fixes: 08e875c16a16c ("arm64: SMP support")
Reported-by: Dave Martin <Dave.Martin@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek: Fix pop noise on ALC225

commit 3b36b13d5e69d6f51ff1c55d1b404a74646c9757 upstream.

Commit 317d9313925c ("ALSA: hda/realtek - Set default power save node to
0") makes the ALC225 have pop noise on S3 resume and cold boot.

So partially revert this commit for ALC225 to fix the regression.

Fixes: 317d9313925c ("ALSA: hda/realtek - Set default power save node to 0")
BugLink: https://bugs.launchpad.net/bugs/1866357
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Link: https://lore.kernel.org/r/20200311061328.17614-1-kai.heng.feng@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "ipv6: Fix handling of LLA with VRF and sockets bound to VRF"

This reverts commit 2b3541ffdd05198b329d21920a0f606009a1058b.

This patch shouldn't have been backported to 4.19.

Signed-off-by: Sasha Levin <sashal@kernel.org>

Revert "vrf: mark skb for multicast or link-local as enslaved to VRF"

This reverts commit 91c5f99d131ed3b231aaef7d4ed6799085b095a3.

This patch shouldn't have been backported to 4.19.

Signed-off-by: Sasha Levin <sashal@kernel.org>

futex: Unbreak futex hashing

commit 8d67743653dce5a0e7aa500fcccb237cde7ad88e upstream.

The recent futex inode life time fix changed the ordering of the futex key
union struct members, but forgot to adjust the hash function accordingly,

As a result the hashing omits the leading 64bit and even hashes beyond the
futex key causing a bad hash distribution which led to a ~100% performance
regression.

Hand in the futex key pointer instead of a random struct member and make
the size calculation based of the struct offset.

Fixes: 8019ad13ef7f ("futex: Fix inode life-time issue")
Reported-by: Rong Chen <rong.a.chen@intel.com>
Decoded-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Rong Chen <rong.a.chen@intel.com>
Link: https://lkml.kernel.org/r/87h7yy90ve.fsf@nanos.tec.linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

futex: Fix inode life-time issue

commit 8019ad13ef7f64be44d4f892af9c840179009254 upstream.

As reported by Jann, ihold() does not in fact guarantee inode
persistence. And instead of making it so, replace the usage of inode
pointers with a per boot, machine wide, unique inode identifier.

This sequence number is global, but shared (file backed) futexes are
rare enough that this should not become a performance issue.

Reported-by: Jann Horn <jannh@google.com>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kbuild: Disable -Wpointer-to-enum-cast

commit 82f2bc2fcc0160d6f82dd1ac64518ae0a4dd183f upstream.

Clang's -Wpointer-to-int-cast deviates from GCC in that it warns when
casting to enums. The kernel does this in certain places, such as device
tree matches to set the version of the device being used, which allows
the kernel to avoid using a gigantic union.

https://elixir.bootlin.com/linux/v5.5.8/source/drivers/ata/ahci_brcm.c#L428
https://elixir.bootlin.com/linux/v5.5.8/source/drivers/ata/ahci_brcm.c#L402
https://elixir.bootlin.com/linux/v5.5.8/source/include/linux/mod_devicetable.h#L264

To avoid a ton of false positive warnings, disable this particular part
of the warning, which has been split off into a separate diagnostic so
that the entire warning does not need to be turned off for clang. It
will be visible under W=1 in case people want to go about fixing these
easily and enabling the warning treewide.

Cc: stable@vger.kernel.org
Link: https://github.com/ClangBuiltLinux/linux/issues/887
Link: https://github.com/llvm/llvm-project/commit/2a41b31fcdfcb67ab7038fc2ffb606fd50b83a84
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iio: light: vcnl4000: update sampling periods for vcnl4200

[ Upstream commit b42aa97ed5f1169cfd37175ef388ea62ff2dcf43 ]

Vishay has published a new version of "Designing the VCNL4200 Into an
Application" application note in October 2019. The new version specifies
that there is +-20% of part to part tolerance. This explains the drift
seen during experiments. The proximity pulse width is also changed from
32us to 30us. According to the support, the tolerance also applies to
ambient light.

So update the sampling periods. As the reading is blocking, current
users may notice slightly longer response time.

Fixes: be38866fbb97 ("iio: vcnl4000: add support for VCNL4200")
Reviewed-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Tomas Novotny <tomas@novotny.cz>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

USB: cdc-acm: fix rounding error in TIOCSSERIAL

[ Upstream commit b401f8c4f492cbf74f3f59c9141e5be3071071bb ]

By default, tty_port_init() initializes those parameters to a multiple
of HZ. For instance in line 69 of tty_port.c:
   port->close_delay = (50 * HZ) / 100;
https://github.com/torvalds/linux/blob/master/drivers/tty/tty_port.c#L69

With e.g. CONFIG_HZ = 250 (as this is the case for Ubuntu 18.04
linux-image-4.15.0-37-generic), the default setting for close_delay is
thus 125.

When ioctl(fd, TIOCGSERIAL, &s) is executed, the setting returned in
user space is '12' (125/10). When ioctl(fd, TIOCSSERIAL, &s) is then
executed with the same setting '12', the value is interpreted as '120'
which is different from the current setting and a EPERM error may be
raised by set_serial_info() if !CAP_SYS_ADMIN.
https://github.com/torvalds/linux/blob/master/drivers/usb/class/cdc-acm.c#L919

Fixes: ba2d8ce9db0a6 ("cdc-acm: implement TIOCSSERIAL to avoid blocking close(2)")
Signed-off-by: Anthony Mallet <anthony.mallet@laas.fr>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200312133101.7096-2-anthony.mallet@laas.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

USB: cdc-acm: fix close_delay and closing_wait units in TIOCSSERIAL

[ Upstream commit 633e2b2ded739a34bd0fb1d8b5b871f7e489ea29 ]

close_delay and closing_wait are specified in hundredth of a second but stored
internally in jiffies. Use the jiffies_to_msecs() and msecs_to_jiffies()
functions to convert from each other.

Signed-off-by: Anthony Mallet <anthony.mallet@laas.fr>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200312133101.7096-1-anthony.mallet@laas.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86/mm: split vmalloc_sync_all()

commit 763802b53a427ed3cbd419dbba255c414fdd9e7c upstream.

Commit 3f8fd02b1bf1 ("mm/vmalloc: Sync unmappings in
__purge_vmap_area_lazy()") introduced a call to vmalloc_sync_all() in
the vunmap() code-path.  While this change was necessary to maintain
correctness on x86-32-pae kernels, it also adds additional cycles for
architectures that don't need it.

Specifically on x86-64 with CONFIG_VMAP_STACK=y some people reported
severe performance regressions in micro-benchmarks because it now also
calls the x86-64 implementation of vmalloc_sync_all() on vunmap().  But
the vmalloc_sync_all() implementation on x86-64 is only needed for newly
created mappings.

To avoid the unnecessary work on x86-64 and to gain the performance
back, split up vmalloc_sync_all() into two functions:

* vmalloc_sync_mappings(), and
* vmalloc_sync_unmappings()

Most call-sites to vmalloc_sync_all() only care about new mappings being
synchronized.  The only exception is the new call-site added in the
above mentioned commit.

Shile Zhang directed us to a report of an 80% regression in reaim
throughput.

Fixes: 3f8fd02b1bf1 ("mm/vmalloc: Sync unmappings in __purge_vmap_area_lazy()")
Reported-by: kernel test robot <oliver.sang@intel.com>
Reported-by: Shile Zhang <shile.zhang@linux.alibaba.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Borislav Petkov <bp@suse.de>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> [GHES]
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20191009124418.8286-1-joro@8bytes.org
Link: https://lists.01.org/hyperkitty/list/lkp@lists.01.org/thread/4D3JPPHBNOSPFK2KEPC6KGKS6J25AIDB/
Link: http://lkml.kernel.org/r/20191113095530.228959-1-shile.zhang@linux.alibaba.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

page-flags: fix a crash at SetPageError(THP_SWAP)

commit d72520ad004a8ce18a6ba6cde317f0081b27365a upstream.

Commit bd4c82c22c36 ("mm, THP, swap: delay splitting THP after swapped
out") supported writing THP to a swap device but forgot to upgrade an
older commit df8c94d13c7e ("page-flags: define behavior of FS/IO-related
flags on compound pages") which could trigger a crash during THP
swapping out with DEBUG_VM_PGFLAGS=y,

  kernel BUG at include/linux/page-flags.h:317!

  page dumped because: VM_BUG_ON_PAGE(1 && PageCompound(page))
  page:fffff3b2ec3a8000 refcount:512 mapcount:0 mapping:000000009eb0338c index:0x7f6e58200 head:fffff3b2ec3a8000 order:9 compound_mapcount:0 compound_pincount:0
  anon flags: 0x45fffe0000d8454(uptodate|lru|workingset|owner_priv_1|writeback|head|reclaim|swapbacked)

  end_swap_bio_write()
    SetPageError(page)
      VM_BUG_ON_PAGE(1 && PageCompound(page))

  <IRQ>
  bio_endio+0x297/0x560
  dec_pending+0x218/0x430 [dm_mod]
  clone_endio+0xe4/0x2c0 [dm_mod]
  bio_endio+0x297/0x560
  blk_update_request+0x201/0x920
  scsi_end_request+0x6b/0x4b0
  scsi_io_completion+0x509/0x7e0
  scsi_finish_command+0x1ed/0x2a0
  scsi_softirq_done+0x1c9/0x1d0
  __blk_mqnterrupt+0xf/0x20
  </IRQ>

Fix by checking PF_NO_TAIL in those places instead.

Fixes: bd4c82c22c36 ("mm, THP, swap: delay splitting THP after swapped out")
Signed-off-by: Qian Cai <cai@lca.pw>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: "Huang, Ying" <ying.huang@intel.com>
Acked-by: Rafael Aquini <aquini@redhat.com>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20200310235846.1319-1-cai@lca.pw
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm, slub: prevent kmalloc_node crashes and memory leaks

commit 0715e6c516f106ed553828a671d30ad9a3431536 upstream.

Sachin reports [1] a crash in SLUB __slab_alloc():

  BUG: Kernel NULL pointer dereference on read at 0x000073b0
  Faulting instruction address: 0xc0000000003d55f4
  Oops: Kernel access of bad area, sig: 11 [#1]
  LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries
  Modules linked in:
  CPU: 19 PID: 1 Comm: systemd Not tainted 5.6.0-rc2-next-20200218-autotest #1
  NIP:  c0000000003d55f4 LR: c0000000003d5b94 CTR: 0000000000000000
  REGS: c0000008b37836d0 TRAP: 0300   Not tainted  (5.6.0-rc2-next-20200218-autotest)
  MSR:  8000000000009033 <SF,EE,ME,IR,DR,RI,LE>  CR: 24004844  XER: 00000000
  CFAR: c00000000000dec4 DAR: 00000000000073b0 DSISR: 40000000 IRQMASK: 1
  GPR00: c0000000003d5b94 c0000008b3783960 c00000000155d400 c0000008b301f500
  GPR04: 0000000000000dc0 0000000000000002 c0000000003443d8 c0000008bb398620
  GPR08: 00000008ba2f0000 0000000000000001 0000000000000000 0000000000000000
  GPR12: 0000000024004844 c00000001ec52a00 0000000000000000 0000000000000000
  GPR16: c0000008a1b20048 c000000001595898 c000000001750c18 0000000000000002
  GPR20: c000000001750c28 c000000001624470 0000000fffffffe0 5deadbeef0000122
  GPR24: 0000000000000001 0000000000000dc0 0000000000000002 c0000000003443d8
  GPR28: c0000008b301f500 c0000008bb398620 0000000000000000 c00c000002287180
  NIP ___slab_alloc+0x1f4/0x760
  LR __slab_alloc+0x34/0x60
  Call Trace:
    ___slab_alloc+0x334/0x760 (unreliable)
    __slab_alloc+0x34/0x60
    __kmalloc_node+0x110/0x490
    kvmalloc_node+0x58/0x110
    mem_cgroup_css_online+0x108/0x270
    online_css+0x48/0xd0
    cgroup_apply_control_enable+0x2ec/0x4d0
    cgroup_mkdir+0x228/0x5f0
    kernfs_iop_mkdir+0x90/0xf0
    vfs_mkdir+0x110/0x230
    do_mkdirat+0xb0/0x1a0
    system_call+0x5c/0x68

This is a PowerPC platform with following NUMA topology:

  available: 2 nodes (0-1)
  node 0 cpus:
  node 0 size: 0 MB
  node 0 free: 0 MB
  node 1 cpus: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
  node 1 size: 35247 MB
  node 1 free: 30907 MB
  node distances:
  node   0   1
    0:  10  40
    1:  40  10

  possible numa nodes: 0-31

This only happens with a mmotm patch "mm/memcontrol.c: allocate
shrinker_map on appropriate NUMA node" [2] which effectively calls
kmalloc_node for each possible node.  SLUB however only allocates
kmem_cache_node on online N_NORMAL_MEMORY nodes, and relies on
node_to_mem_node to return such valid node for other nodes since commit
a561ce00b09e ("slub: fall back to node_to_mem_node() node if allocating
on memoryless node").  This is however not true in this configuration
where the _node_numa_mem_ array is not initialized for nodes 0 and 2-31,
thus it contains zeroes and get_partial() ends up accessing
non-allocated kmem_cache_node.

A related issue was reported by Bharata (originally by Ramachandran) [3]
where a similar PowerPC configuration, but with mainline kernel without
patch [2] ends up allocating large amounts of pages by kmalloc-1k
kmalloc-512.  This seems to have the same underlying issue with
node_to_mem_node() not behaving as expected, and might probably also
lead to an infinite loop with CONFIG_SLUB_CPU_PARTIAL [4].

This patch should fix both issues by not relying on node_to_mem_node()
anymore and instead simply falling back to NUMA_NO_NODE, when
kmalloc_node(node) is attempted for a node that's not online, or has no
usable memory.  The "usable memory" condition is also changed from
node_present_pages() to N_NORMAL_MEMORY node state, as that is exactly
the condition that SLUB uses to allocate kmem_cache_node structures.
The check in get_partial() is removed completely, as the checks in
___slab_alloc() are now sufficient to prevent get_partial() being
reached with an invalid node.

[1] https://lore.kernel.org/linux-next/3381CD91-AB3D-4773-BA04-E7A072A63968@linux.vnet.ibm.com/
[2] https://lore.kernel.org/linux-mm/fff0e636-4c36-ed10-281c-8cdb0687c839@virtuozzo.com/
[3] https://lore.kernel.org/linux-mm/20200317092624.GB22538@in.ibm.com/
[4] https://lore.kernel.org/linux-mm/088b5996-faae-8a56-ef9c-5b567125ae54@suse.cz/

Fixes: a561ce00b09e ("slub: fall back to node_to_mem_node() node if allocating on memoryless node")
Reported-by: Sachin Sant <sachinp@linux.vnet.ibm.com>
Reported-by: PUVICHAKRAVARTHY RAMACHANDRAN <puvichakravarthy@in.ibm.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Sachin Sant <sachinp@linux.vnet.ibm.com>
Tested-by: Bharata B Rao <bharata@linux.ibm.com>
Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Christopher Lameter <cl@linux.com>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Kirill Tkhai <ktkhai@virtuozzo.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Nathan Lynch <nathanl@linux.ibm.com>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20200320115533.9604-1-vbabka@suse.cz
Debugged-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm: slub: be more careful about the double cmpxchg of freelist

commit 5076190daded2197f62fe92cf69674488be44175 upstream.

This is just a cleanup addition to Jann's fix to properly update the
transaction ID for the slub slowpath in commit fd4d9c7d0c71 ("mm: slub:
add missing TID bump..").

The transaction ID is what protects us against any concurrent accesses,
but we should really also make sure to make the 'freelist' comparison
itself always use the same freelist value that we then used as the new
next free pointer.

Jann points out that if we do all of this carefully, we could skip the
transaction ID update for all the paths that only remove entries from
the lists, and only update the TID when adding entries (to avoid the ABA
issue with cmpxchg and list handling re-adding a previously seen value).

But this patch just does the "make sure to cmpxchg the same value we
used" rather than then try to be clever.

Acked-by: Jann Horn <jannh@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

memcg: fix NULL pointer dereference in __mem_cgroup_usage_unregister_event

commit 7d36665a5886c27ca4c4d0afd3ecc50b400f3587 upstream.

An eventfd monitors multiple memory thresholds of the cgroup, closes them,
the kernel deletes all events related to this eventfd.  Before all events
are deleted, another eventfd monitors the memory threshold of this cgroup,
leading to a crash:

  BUG: kernel NULL pointer dereference, address: 0000000000000004
  #PF: supervisor write access in kernel mode
  #PF: error_code(0x0002) - not-present page
  PGD 800000033058e067 P4D 800000033058e067 PUD 3355ce067 PMD 0
  Oops: 0002 [#1] SMP PTI
  CPU: 2 PID: 14012 Comm: kworker/2:6 Kdump: loaded Not tainted 5.6.0-rc4 #3
  Hardware name: LENOVO 20AWS01K00/20AWS01K00, BIOS GLET70WW (2.24 ) 05/21/2014
  Workqueue: events memcg_event_remove
  RIP: 0010:__mem_cgroup_usage_unregister_event+0xb3/0x190
  RSP: 0018:ffffb47e01c4fe18 EFLAGS: 00010202
  RAX: 0000000000000001 RBX: ffff8bb223a8a000 RCX: 0000000000000001
  RDX: 0000000000000001 RSI: ffff8bb22fb83540 RDI: 0000000000000001
  RBP: ffffb47e01c4fe48 R08: 0000000000000000 R09: 0000000000000010
  R10: 000000000000000c R11: 071c71c71c71c71c R12: ffff8bb226aba880
  R13: ffff8bb223a8a480 R14: 0000000000000000 R15: 0000000000000000
  FS:  0000000000000000(0000) GS:ffff8bb242680000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 0000000000000004 CR3: 000000032c29c003 CR4: 00000000001606e0
  Call Trace:
    memcg_event_remove+0x32/0x90
    process_one_work+0x172/0x380
    worker_thread+0x49/0x3f0
    kthread+0xf8/0x130
    ret_from_fork+0x35/0x40
  CR2: 0000000000000004

We can reproduce this problem in the following ways:

1. We create a new cgroup subdirectory and a new eventfd, and then we
   monitor multiple memory thresholds of the cgroup through this eventfd.

2.  closing this eventfd, and __mem_cgroup_usage_unregister_event ()
   will be called multiple times to delete all events related to this
   eventfd.

The first time __mem_cgroup_usage_unregister_event() is called, the
kernel will clear all items related to this eventfd in thresholds->
primary.

Since there is currently only one eventfd, thresholds-> primary becomes
empty, so the kernel will set thresholds-> primary and hresholds-> spare
to NULL.  If at this time, the user creates a new eventfd and monitor
the memory threshold of this cgroup, kernel will re-initialize
thresholds-> primary.

Then when __mem_cgroup_usage_unregister_event () is called for the
second time, because thresholds-> primary is not empty, the system will
access thresholds-> spare, but thresholds-> spare is NULL, which will
trigger a crash.

In general, the longer it takes to delete all events related to this
eventfd, the easier it is to trigger this problem.

The solution is to check whether the thresholds associated with the
eventfd has been cleared when deleting the event.  If so, we do nothing.

[akpm@linux-foundation.org: fix comment, per Kirill]
Fixes: 907860ed381a ("cgroups: make cftype.unregister_event() void-returning")
Signed-off-by: Chunguang Xu <brookxu@tencent.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/077a6f67-aefa-4591-efec-f2f3af2b0b02@gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/lease: fix WARNING in idr_destroy

commit b216a8e7908cd750550c0480cf7d2b3a37f06954 upstream.

drm_lease_create takes ownership of leases. And leases will be released
by drm_master_put.

drm_master_put
    ->drm_master_destroy
            ->idr_destroy

So we needn't call idr_destroy again.

Reported-and-tested-by: syzbot+05835159fe322770fe3d@syzkaller.appspotmail.com
Signed-off-by: Qiujun Huang <hqjagain@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1584518030-4173-1-git-send-email-hqjagain@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amd/amdgpu: Fix GPR read from debugfs (v2)

commit 5bbc6604a62814511c32f2e39bc9ffb2c1b92cbe upstream.

The offset into the array was specified in bytes but should
be in terms of 32-bit words.  Also prevent large reads that
would also cause a buffer overread.

v2:  Read from correct offset from internal storage buffer.

Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: fix log context list corruption after rename whiteout error

commit 236ebc20d9afc5e9ff52f3cf3f365a91583aac10 upstream.

During a rename whiteout, if btrfs_whiteout_for_rename() returns an error
we can end up returning from btrfs_rename() with the log context object
still in the root's log context list - this happens if 'sync_log' was
set to true before we called btrfs_whiteout_for_rename() and it is
dangerous because we end up with a corrupt linked list (root->log_ctxs)
as the log context object was allocated on the stack.

After btrfs_rename() returns, any task that is running btrfs_sync_log()
concurrently can end up crashing because that linked list is traversed by
btrfs_sync_log() (through btrfs_remove_all_log_ctxs()). That results in
the same issue that commit e6c617102c7e4 ("Btrfs: fix log context list
corruption after rename exchange operation") fixed.

Fixes: d4682ba03ef618 ("Btrfs: sync log after logging new name")
CC: stable@vger.kernel.org # 4.19+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xhci: Do not open code __print_symbolic() in xhci trace events

commit 045706bff837ee89c13f1ace173db71922c1c40b upstream.

libtraceevent (used by perf and trace-cmd) failed to parse the
xhci_urb_dequeue trace event. This is because the user space trace
event format parsing is not a full C compiler. It can handle some basic
logic, but is not meant to be able to handle everything C can do.

In cases where a trace event field needs to be converted from a number
to a string, there's the __print_symbolic() macro that should be used:

 See samples/trace_events/trace-events-sample.h

Some xhci trace events open coded the __print_symbolic() causing the
user spaces tools to fail to parse it. This has to be replaced with
__print_symbolic() instead.

CC: stable@vger.kernel.org
Reported-by: Tzvetomir Stoyanov <tstoyanov@vmware.com>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=206531
Fixes: 5abdc2e6e12ff ("usb: host: xhci: add urb_enqueue/dequeue/giveback tracers")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20200306150858.21904-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rtc: max8907: add missing select REGMAP_IRQ

commit 5d892919fdd0cefd361697472d4e1b174a594991 upstream.

I have hit the following build error:

  armv7a-hardfloat-linux-gnueabi-ld: drivers/rtc/rtc-max8907.o: in function `max8907_rtc_probe':
  rtc-max8907.c:(.text+0x400): undefined reference to `regmap_irq_get_virq'

max8907 should select REGMAP_IRQ

Fixes: 94c01ab6d7544 ("rtc: add MAX8907 RTC driver")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

intel_th: pci: Add Elkhart Lake CPU support

commit add492d2e9446a77ede9bb43699ec85ca8fc1aba upstream.

This adds support for the Trace Hub in Elkhart Lake CPU.

Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200317062215.15598-7-alexander.shishkin@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

intel_th: Fix user-visible error codes

commit ce666be89a8a09c5924ff08fc32e119f974bdab6 upstream.

There are a few places in the driver that end up returning ENOTSUPP to
the user, replace those with EINVAL.

Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Fixes: ba82664c134ef ("intel_th: Add Memory Storage Unit driver")
Cc: stable@vger.kernel.org # v4.4+
Link: https://lore.kernel.org/r/20200317062215.15598-6-alexander.shishkin@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/speakup: fix get_word non-space look-ahead

commit 9d32c0cde4e2d1343dfb88a67b2ec6397705b32b upstream.

get_char was erroneously given the address of the pointer to the text
instead of the address of the text, thus leading to random crashes when
the user requests speaking a word while the current position is on a space
character and say_word_ctl is not enabled.

Reported-on: https://github.com/bytefire/speakup/issues/1
Reported-by: Kirk Reiser <kirk@reisers.ca>
Reported-by: Janina Sajka <janina@rednote.net>
Reported-by: Alexandr Epaneshnikov <aarnaarn2@gmail.com>
Reported-by: Gregory Nowak <greg@gregn.net>
Reported-by: deedra waters <deedra@the-brannons.com>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Tested-by: Alexandr Epaneshnikov <aarnaarn2@gmail.com>
Tested-by: Gregory Nowak <greg@gregn.net>
Tested-by: Michael Taboada <michael@michaels.world>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200306003047.thijtmqrnayd3dmw@function
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: greybus: loopback_test: fix poll-mask build breakage

commit 8f3675be4bda33adbdc1dd2ab3b6c76a7599a79e upstream.

A scripted conversion from userland POLL* to kernel EPOLL* constants
mistakingly replaced the poll flags in the loopback_test tool, which
therefore no longer builds.

Fixes: a9a08845e9ac ("vfs: do bulk POLL* -> EPOLL* replacement")
Cc: stable <stable@vger.kernel.org> # 4.16
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20200312110151.22028-2-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Add device id for MERCUSYS MW150US v2

commit bb5786b9286c253557a0115bc8d21879e61b7b94 upstream.

This device was added to the stand-alone driver on github.
Add it to the staging driver as well.

Link: https://github.com/lwfinger/rtl8188eu/commit/2141f244c3e7
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200312093652.13918-1-straube.linux@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: sdhci-of-at91: fix cd-gpios for SAMA5D2

commit 53dd0a7cd65edc83b0c243d1c08377c8b876b2ee upstream.

SAMA5D2x doesn't drive CMD line if GPIO is used as CD line (at least
SAMA5D27 doesn't). Fix this by forcing card-detect in the module
if module-controlled CD is not used.

Fixed commit addresses the problem only for non-removable cards. This
amends it to also cover gpio-cd case.

Cc: stable@vger.kernel.org
Fixes: 7a1e3f143176 ("mmc: sdhci-of-at91: force card detect value for non removable devices")
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/8d10950d9940468577daef4772b82a071b204716.1584290561.git.mirq-linux@rere.qmqm.pl
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: rtsx_pci: Fix support for speed-modes that relies on tuning

commit 4686392c32361c97e8434adf9cc77ad7991bfa81 upstream.

The TX/RX register should not be treated the same way to allow for better
support of tuning. Fix this by using a default initial value for TX.

Signed-off-by: Ricky Wu <ricky_wu@realtek.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200316025232.1167-1-ricky_wu@realtek.com
[Ulf: Updated changelog]
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: adc: at91-sama5d2_adc: fix differential channels in triggered mode

commit a500f3bd787f8224341e44b238f318c407b10897 upstream.

The differential channels require writing the channel offset register (COR).
Otherwise they do not work in differential mode.
The configuration of COR is missing in triggered mode.

Fixes: 5e1a1da0f8c9 ("iio: adc: at91-sama5d2_adc: add hw trigger and buffer support")
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: magnetometer: ak8974: Fix negative raw values in sysfs

commit b500c086e4110829a308c23e83a7cdc65b26228a upstream.

At the moment, reading from in_magn_*_raw in sysfs tends to return
large values around 65000, even though the output of ak8974 is actually
limited to ±32768. This happens because the value is never converted
to the signed 16-bit integer variant.

Add an explicit cast to s16 to fix this.

Fixes: 7c94a8b2ee8c ("iio: magn: add a driver for AK8974")
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Linus Waleij <linus.walleij@linaro.org>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: trigger: stm32-timer: disable master mode when stopping

commit 29e8c8253d7d5265f58122c0a7902e26df6c6f61 upstream.

Master mode should be disabled when stopping. This mainly impacts
possible other use-case after timer has been stopped. Currently,
master mode remains set (from start routine).

Fixes: 6fb34812c2a2 ("iio: stm32 trigger: Add support for TRGO2 triggers")

Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: st_sensors: remap SMO8840 to LIS2DH12

commit e43d110cdc206b6df4dd438cd10c81d1da910aad upstream.

According to ST, the HID is for LIS2DH12.

Fixes: 3d56e19815b3 ("iio: accel: st_accel: Add support for the SMO8840 ACPI id")
Signed-off-by: Wen-chien Jesse Sung <jesse.sung@canonical.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: pcm: oss: Remove WARNING from snd_pcm_plug_alloc() checks

commit 5461e0530c222129dfc941058be114b5cbc00837 upstream.

The return value checks in snd_pcm_plug_alloc() are covered with
snd_BUG_ON() macro that may trigger a kernel WARNING depending on the
kconfig.  But since the error condition can be triggered by a weird
user space parameter passed to OSS layer, we shouldn't give the kernel
stack trace just for that.  As it's a normal error condition, let's
remove snd_BUG_ON() macro usage there.

Reported-by: syzbot+2a59ee7a9831b264f45e@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200312155730.7520-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: pcm: oss: Avoid plugin buffer overflow

commit f2ecf903ef06eb1bbbfa969db9889643d487e73a upstream.

Each OSS PCM plugins allocate its internal buffer per pre-calculation
of the max buffer size through the chain of plugins (calling
src_frames and dst_frames callbacks).  This works for most plugins,
but the rate plugin might behave incorrectly.  The calculation in the
rate plugin involves with the fractional position, i.e. it may vary
depending on the input position.  Since the buffer size
pre-calculation is always done with the offset zero, it may return a
shorter size than it might be; this may result in the out-of-bound
access as spotted by fuzzer.

This patch addresses those possible buffer overflow accesses by simply
setting the upper limit per the given buffer size for each plugin
before src_frames() and after dst_frames() calls.

Reported-by: syzbot+e1fe9f44fb8ecf4fb5dd@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/000000000000b25ea005a02bcf21@google.com
Link: https://lore.kernel.org/r/20200309082148.19855-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: seq: oss: Fix running status after receiving sysex

commit 6c3171ef76a0bad892050f6959a7eac02fb16df7 upstream.

This is a similar bug like the previous case for virmidi: the invalid
running status is kept after receiving a sysex message.

Again the fix is to clear the running status after handling the sysex.

Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/3b4a4e0f232b7afbaf0a843f63d0e538e3029bfd.camel@domdv.de
Link: https://lore.kernel.org/r/20200316090506.23966-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: seq: virmidi: Fix running status after receiving sysex

commit 4384f167ce5fa7241b61bb0984d651bc528ddebe upstream.

The virmidi driver handles sysex event exceptionally in a short-cut
snd_seq_dump_var_event() call, but this missed the reset of the
running status.  As a result, it may lead to an incomplete command
right after the sysex when an event with the same running status was
queued.

Fix it by clearing the running status properly via alling
snd_midi_event_reset_decode() for that code path.

Reported-by: Andreas Steinmetz <ast@domdv.de>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/3b4a4e0f232b7afbaf0a843f63d0e538e3029bfd.camel@domdv.de
Link: https://lore.kernel.org/r/20200316090506.23966-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: line6: Fix endless MIDI read loop

commit d683469b3c93d7e2afd39e6e1970f24700eb7a68 upstream.

The MIDI input event parser of the LINE6 driver may enter into an
endless loop when the unexpected data sequence is given, as it tries
to continue the secondary bytes without termination.  Also, when the
input data is too short, the parser returns a negative error, while
the caller doesn't handle it properly.  This would lead to the
unexpected behavior as well.

This patch addresses those issues by checking the return value
correctly and handling the one-byte event in the parser properly.

The bug was reported by syzkaller.

Reported-by: syzbot+cce32521ee0a824c21f7@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/000000000000033087059f8f8fa3@google.com
Link: https://lore.kernel.org/r/20200309095922.30269-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: xhci: apply XHCI_SUSPEND_DELAY to AMD XHCI controller 1022:145c

commit 16263abc12d09871156a1c8650fb651f0e552f5e upstream.

This controller timeouts during suspend (S3) with
[  240.521724] xhci_hcd 0000:30:00.3: WARN: xHC save state timeout
[  240.521729] xhci_hcd 0000:30:00.3: ERROR mismatched command completion event
thus preventing the system from entering S3.
Moreover it remains in an undefined state where some connected devices stop
working until a reboot.
Apply the XHCI_SUSPEND_DELAY quirk to make it suspend properly.

CC: stable@vger.kernel.org
Signed-off-by: Alberto Mattea <alberto@mattea.info>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20200306150858.21904-3-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: pl2303: add device-id for HP LD381

commit cecc113c1af0dd41ccf265c1fdb84dbd05e63423 upstream.

Add a device id for HP LD381 Display
LD381:   03f0:0f7f

Signed-off-by: Scott Chen <scott@labau.com.tw>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: host: xhci-plat: add a shutdown

commit b433e340e7565110b0ce9ca4b3e26f4b97a1decf upstream.

When loading new kernel via kexec, we need to shutdown host controller to
avoid any un-expected memory accessing during new kernel boot.

Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
Cc: stable <stable@vger.kernel.org>
Tested-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Peter Chen <peter.chen@nxp.com>
Link: https://lore.kernel.org/r/20200306092328.41253-1-ran.wang_1@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: option: add ME910G1 ECM composition 0x110b

commit 8e852a7953be2a6ee371449f7257fe15ace6a1fc upstream.

Add ME910G1 ECM composition 0x110b: tty, tty, tty, ecm

Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Link: https://lore.kernel.org/r/20200304104310.2938-1-dnlplm@gmail.com
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: quirks: add NO_LPM quirk for RTL8153 based ethernet adapters

commit 75d7676ead19b1fbb5e0ee934c9ccddcb666b68c upstream.

We have been receiving bug reports that ethernet connections over
RTL8153 based ethernet adapters stops working after a while with
errors like these showing up in dmesg when the ethernet stops working:

[12696.189484] r8152 6-1:1.0 enp10s0u1: Tx timeout
[12702.333456] r8152 6-1:1.0 enp10s0u1: Tx timeout
[12707.965422] r8152 6-1:1.0 enp10s0u1: Tx timeout

This has been reported on Dell WD15 docks, Belkin USB-C Express Dock 3.1
docks and with generic USB to ethernet dongles using the RTL8153
chipsets. Some users have tried adding usbcore.quirks=0bda:8153:k to
the kernel commandline and all users who have tried this report that
this fixes this.

Also note that we already have an existing NO_LPM quirk for the RTL8153
used in the Microsoft Surface Dock (where it uses a different usb-id).

This commit adds a NO_LPM quirk for the generic Realtek RTL8153
0bda:8153 usb-id, fixing the Tx timeout errors on these devices.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=198931
Cc: stable@vger.kernel.org
Cc: russianneuromancer@ya.ru
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20200313120708.100339-1-hdegoede@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>