ext4: using nofail preallocation in ext4_es_remove_extent()

[ Upstream commit e9fe2b882bd5b26b987c9ba110c2222796f72af5 ]

If __es_remove_extent() returns an error it means that when splitting
extent, allocating an extent that must be kept failed, where returning
an error directly would cause the extent tree to be inconsistent. So we
use GFP_NOFAIL to pre-allocate an extent_status and pass it to
__es_remove_extent() to avoid this problem.

In addition, since the allocated memory is outside the i_es_lock, the
extent_status tree may change and the pre-allocated extent_status is
no longer needed, so we release the pre-allocated extent_status when
es->es_len is not initialized.

Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230424033846.4732-7-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Stable-dep-of: 8e387c89e96b ("ext4: make sure allocate pending entry not fail")
Signed-off-by: Sasha Levin <sashal@kernel.org>

ext4: use pre-allocated es in __es_remove_extent()

[ Upstream commit bda3efaf774fb687c2b7a555aaec3006b14a8857 ]

When splitting extent, if the second extent can not be dropped, we return
-ENOMEM and use GFP_NOFAIL to preallocate an extent_status outside of
i_es_lock and pass it to __es_remove_extent() to be used as the second
extent. This ensures that __es_remove_extent() is executed successfully,
thus ensuring consistency in the extent status tree. If the second extent
is not undroppable, we simply drop it and return 0. Then retry is no longer
necessary, remove it.

Now, __es_remove_extent() will always remove what it should, maybe more.

Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230424033846.4732-6-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Stable-dep-of: 8e387c89e96b ("ext4: make sure allocate pending entry not fail")
Signed-off-by: Sasha Levin <sashal@kernel.org>

ext4: use pre-allocated es in __es_insert_extent()

[ Upstream commit 95f0b320339a977cf69872eac107122bf536775d ]

Pass a extent_status pointer prealloc to __es_insert_extent(). If the
pointer is non-null, it is used directly when a new extent_status is
needed to avoid memory allocation failures.

Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230424033846.4732-5-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Stable-dep-of: 8e387c89e96b ("ext4: make sure allocate pending entry not fail")
Signed-off-by: Sasha Levin <sashal@kernel.org>

ext4: factor out __es_alloc_extent() and __es_free_extent()

[ Upstream commit 73a2f033656be11298912201ad50615307b4477a ]

Factor out __es_alloc_extent() and __es_free_extent(), which only allocate
and free extent_status in these two helpers.

The ext4_es_alloc_extent() function is split into __es_alloc_extent()
and ext4_es_init_extent(). In __es_alloc_extent() we allocate memory using
GFP_KERNEL | __GFP_NOFAIL | __GFP_ZERO if the memory allocation cannot
fail, otherwise we use GFP_ATOMIC. and the ext4_es_init_extent() is used to
initialize extent_status and update related variables after a successful
allocation.

This is to prepare for the use of pre-allocated extent_status later.

Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230424033846.4732-4-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Stable-dep-of: 8e387c89e96b ("ext4: make sure allocate pending entry not fail")
Signed-off-by: Sasha Levin <sashal@kernel.org>

ext4: add a new helper to check if es must be kept

[ Upstream commit 9649eb18c6288f514cacffdd699d5cd999c2f8f6 ]

In the extent status tree, we have extents which we can just drop without
issues and extents we must not drop - this depends on the extent's status
- currently ext4_es_is_delayed() extents must stay, others may be dropped.

A helper function is added to help determine if the current extent can
be dropped, although only ext4_es_is_delayed() extents cannot be dropped
currently.

Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230424033846.4732-3-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Stable-dep-of: 8e387c89e96b ("ext4: make sure allocate pending entry not fail")
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: qcom: camss: Fix genpd cleanup

[ Upstream commit f69791c39745e64621216fe8919cb73c0065002b ]

Right now we never release the power-domains properly on the error path.
Add a routine to be reused for this purpose and appropriate jumps in
probe() to run that routine where necessary.

Fixes: 2f6f8af67203 ("media: camss: Refactor VFE power domain toggling")
Cc: stable@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: qcom: camss: Fix V4L2 async notifier error path

[ Upstream commit b278080a89f452063915beda0ade6b3ed5ee4271 ]

Previously the jump label err_cleanup was used higher in the probe()
function to release the async notifier however the async notifier
registration was moved later in the code rendering the previous four jumps
redundant.

Rename the label from err_cleanup to err_v4l2_device_unregister to capture
what the jump does.

Fixes: 51397a4ec75d ("media: qcom: Initialise V4L2 async notifier later")
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
[hverkuil: fix old name in commit log: err_v4l2_device_register -> err_v4l2_device_unregister]
Stable-dep-of: f69791c39745 ("media: qcom: camss: Fix genpd cleanup")
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: qcom: Initialise V4L2 async notifier later

[ Upstream commit 5651bab6890a0c5d126e2559b4aa353bed201e47 ]

Initialise V4L2 async notifier and parse DT for async sub-devices later,
just before registering the notifier. This way the device can be made
available to the V4L2 async framework from the notifier init time onwards.
A subsequent patch will add struct v4l2_device as an argument to
v4l2_async_nf_init().

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Philipp Zabel <p.zabel@pengutronix.de> # imx6qp
Tested-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> # rcar + adv746x
Tested-by: Aishwarya Kothari <aishwarya.kothari@toradex.com> # Apalis i.MX6Q with TC358743
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # Renesas RZ/G2L SMARC
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Stable-dep-of: f69791c39745 ("media: qcom: camss: Fix genpd cleanup")
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: camss: Convert to platform remove callback returning void

[ Upstream commit 428bbf4be4018aefa26e4d6531779fa8925ecaaf ]

The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Stable-dep-of: f69791c39745 ("media: qcom: camss: Fix genpd cleanup")
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: camss: Split power domain management

[ Upstream commit 46cc031754985ee24034d55687540adb079f8630 ]

There are three cases of power domain management on supported platforms:
1) CAMSS on MSM8916, where a single VFE power domain is operated outside
   of the camss device driver,
2) CAMSS on MSM8996 and SDM630/SDM660, where two VFE power domains are
   managed separately by the camss device driver, the power domains are
   linked and unlinked on demand by their functions vfe_pm_domain_on()
   and vfe_pm_domain_off() respectively,
3) CAMSS on SDM845 and SM8250 platforms, and there are two VFE power
   domains and their parent power domain TITAN_TOP, the latter one
   shall be turned on prior to turning on any of VFE power domains.

Due to a previously missing link between TITAN_TOP and VFEx power domains
in the latter case, which is now fixed by [1], it was decided always to
turn on all found VFE power domains and TITAN_TOP power domain, even if
just one particular VFE is needed to be enabled or none of VFE power
domains are required, for instance the latter case is when vfe_lite is in
use. This misusage becomes more incovenient and clumsy, if next generations
are to be supported, for instance CAMSS on SM8450 has three VFE power
domains.

The change splits the power management support for platforms with TITAN_TOP
parent power domain, and, since 'power-domain-names' property is not
present in camss device tree nodes, the assumption is that the first
N power domains from the 'power-domains' list correspond to VFE power
domains, and, if the number of power domains is greater than number of
non-lite VFEs, then the last power domain from the list is the TITAN_TOP
power domain.

Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Stable-dep-of: f69791c39745 ("media: qcom: camss: Fix genpd cleanup")
Signed-off-by: Sasha Levin <sashal@kernel.org>

MIPS: KVM: Fix a build warning about variable set but not used

[ Upstream commit 83767a67e7b6a0291cde5681ec7e3708f3f8f877 ]

After commit 411740f5422a ("KVM: MIPS/MMU: Implement KVM_CAP_SYNC_MMU")
old_pte is no longer used in kvm_mips_map_page(). So remove it to fix a
build warning about variable set but not used:

   arch/mips/kvm/mmu.c: In function 'kvm_mips_map_page':
>> arch/mips/kvm/mmu.c:701:29: warning: variable 'old_pte' set but not used [-Wunused-but-set-variable]
     701 |         pte_t *ptep, entry, old_pte;
         |                             ^~~~~~~

Cc: stable@vger.kernel.org
Fixes: 411740f5422a960 ("KVM: MIPS/MMU: Implement KVM_CAP_SYNC_MMU")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202310070530.aARZCSfh-lkp@intel.com/
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cifs: fix leak of iface for primary channel

[ Upstream commit 29954d5b1e0d67a4cd61c30c2201030c97e94b1e ]

My last change in this area introduced a change which
accounted for primary channel in the interface ref count.
However, it did not reduce this ref count on deallocation
of the primary channel. i.e. during umount.

Fixing this leak here, by dropping this ref count for
primary channel while freeing up the session.

Fixes: fa1d0508bdd4 ("cifs: account for primary channel in the interface list")
Cc: stable@vger.kernel.org
Reported-by: Paulo Alcantara <pc@manguebit.com>
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cifs: account for primary channel in the interface list

[ Upstream commit fa1d0508bdd4a68c5e40f85f635712af8c12f180 ]

The refcounting of server interfaces should account
for the primary channel too. Although this is not
strictly necessary, doing so will account for the primary
channel in DebugData.

Cc: stable@vger.kernel.org
Reviewed-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cifs: distribute channels across interfaces based on speed

[ Upstream commit a6d8fb54a515f0546ffdb7870102b1238917e567 ]

Today, if the server interfaces RSS capable, we simply
choose the fastest interface to setup a channel. This is not
a scalable approach, and does not make a lot of attempt to
distribute the connections.

This change does a weighted distribution of channels across
all the available server interfaces, where the weight is
a function of the advertised interface speed.

Also make sure that we don't mix rdma and non-rdma for channels.

Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Stable-dep-of: fa1d0508bdd4 ("cifs: account for primary channel in the interface list")
Signed-off-by: Sasha Levin <sashal@kernel.org>

cifs: print last update time for interface list

[ Upstream commit 05844bd661d9fd478df1175b6639bf2d9398becb ]

We store the last updated time for interface list while
parsing the interfaces. This change is to just print that
info in DebugData.

Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Stable-dep-of: fa1d0508bdd4 ("cifs: account for primary channel in the interface list")
Signed-off-by: Sasha Levin <sashal@kernel.org>

smb3: allow dumping session and tcon id to improve stats analysis and debugging

[ Upstream commit de4eceab578ead12a71e5b5588a57e142bbe8ceb ]

When multiple mounts are to the same share from the same client it was not
possible to determine which section of /proc/fs/cifs/Stats (and DebugData)
correspond to that mount.  In some recent examples this turned out to  be
a significant problem when trying to analyze performance data - since
there are many cases where unless we know the tree id and session id we
can't figure out which stats (e.g. number of SMB3.1.1 requests by type,
the total time they take, which is slowest, how many fail etc.) apply to
which mount. The only existing loosely related ioctl CIFS_IOC_GET_MNT_INFO
does not return the information needed to uniquely identify which tcon
is which mount although it does return various flags and device info.

Add a cifs.ko ioctl CIFS_IOC_GET_TCON_INFO (0x800ccf0c) to return tid,
session id, tree connect count.

Cc: stable@vger.kernel.org
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cifs: minor cleanup of some headers

[ Upstream commit c19204cbd65c12fdcd34fb8f5d645007238ed5cd ]

checkpatch showed formatting problems with extra spaces,
and extra semicolon and some missing blank lines in some
cifs headers.

Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Reviewed-by: Germano Percossi <germano.percossi@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Stable-dep-of: de4eceab578e ("smb3: allow dumping session and tcon id to improve stats analysis and debugging")
Signed-off-by: Sasha Levin <sashal@kernel.org>

lockdep: Fix block chain corruption

[ Upstream commit bca4104b00fec60be330cd32818dd5c70db3d469 ]

Kent reported an occasional KASAN splat in lockdep. Mark then noted:

> I suspect the dodgy access is to chain_block_buckets[-1], which hits the last 4
> bytes of the redzone and gets (incorrectly/misleadingly) attributed to
> nr_large_chain_blocks.

That would mean @size == 0, at which point size_to_bucket() returns -1
and the above happens.

alloc_chain_hlocks() has 'size - req', for the first with the
precondition 'size >= rq', which allows the 0.

This code is trying to split a block, del_chain_block() takes what we
need, and add_chain_block() puts back the remainder, except in the
above case the remainder is 0 sized and things go sideways.

Fixes: 810507fe6fd5 ("locking/lockdep: Reuse freed chain_hlocks entries")
Reported-by: Kent Overstreet <kent.overstreet@linux.dev>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Kent Overstreet <kent.overstreet@linux.dev>
Link: https://lkml.kernel.org/r/20231121114126.GH8262@noisy.programming.kicks-ass.net
Signed-off-by: Sasha Levin <sashal@kernel.org>

USB: dwc3: qcom: fix ACPI platform device leak

[ Upstream commit 9cf87666fc6e08572341fe08ecd909935998fbbd ]

Make sure to free the "urs" platform device, which is created for some
ACPI platforms, on probe errors and on driver unbind.

Compile-tested only.

Fixes: c25c210f590e ("usb: dwc3: qcom: add URS Host support for sdm845 ACPI boot")
Cc: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Acked-by: Andrew Halaney <ahalaney@redhat.com>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Link: https://lore.kernel.org/r/20231117173650.21161-4-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

USB: dwc3: qcom: fix resource leaks on probe deferral

[ Upstream commit 51392a1879ff06dc21b68aef4825f6ef68a7be42 ]

The driver needs to deregister and free the newly allocated dwc3 core
platform device on ACPI probe errors (e.g. probe deferral) and on driver
unbind but instead it leaked those resources while erroneously dropping
a reference to the parent platform device which is still in use.

For OF probing the driver takes a reference to the dwc3 core platform
device which has also always been leaked.

Fix the broken ACPI tear down and make sure to drop the dwc3 core
reference for both OF and ACPI.

Fixes: 8fd95da2cfb5 ("usb: dwc3: qcom: Release the correct resources in dwc3_qcom_remove()")
Fixes: 2bc02355f8ba ("usb: dwc3: qcom: Add support for booting with ACPI")
Fixes: a4333c3a6ba9 ("usb: dwc3: Add Qualcomm DWC3 glue driver")
Cc: stable@vger.kernel.org # 4.18
Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Cc: Lee Jones <lee@kernel.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Acked-by: Andrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/20231117173650.21161-2-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: 9cf87666fc6e ("USB: dwc3: qcom: fix ACPI platform device leak")
Signed-off-by: Sasha Levin <sashal@kernel.org>

nvmet: nul-terminate the NQNs passed in the connect command

[ Upstream commit 1c22e0295a5eb571c27b53c7371f95699ef705ff ]

The host and subsystem NQNs are passed in the connect command payload and
interpreted as nul-terminated strings.  Ensure they actually are
nul-terminated before using them.

Fixes: a07b4970f464 "nvmet: add a generic NVMe target")
Reported-by: Alon Zahavi <zahavi.alon@gmail.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

i40e: Fix adding unsupported cloud filters

[ Upstream commit 4e20655e503e3a478cd1682bf25e3202dd823da8 ]

If a VF tries to add unsupported cloud filter through virtchnl
then i40e_add_del_cloud_filter(_big_buf) returns -ENOTSUPP but
this error code is stored in 'ret' instead of 'aq_ret' that
is used as error code sent back to VF. In this scenario where
one of the mentioned functions fails the value of 'aq_ret'
is zero so the VF will incorrectly receive a 'success'.

Use 'aq_ret' to store return value and remove 'ret' local
variable. Additionally fix the issue when filter allocation
fails, in this case no notification is sent back to the VF.

Fixes: e284fc280473 ("i40e: Add and delete cloud filter")
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20231121211338.3348677-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

i40e: use ERR_PTR error print in i40e messages

[ Upstream commit d5ba18423f87709146c120b20e4a1b8a5b528a76 ]

In i40e_status removal patches, i40e_status conversion
to strings was removed in order to easily refactor
the code to use standard errornums. This however made it
more difficult for read error logs.

Use %pe formatter to print error messages in human-readable
format.

Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Stable-dep-of: 4e20655e503e ("i40e: Fix adding unsupported cloud filters")
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: mm: Fix "rodata=on" when CONFIG_RODATA_FULL_DEFAULT_ENABLED=y

[ Upstream commit acfa60dbe03802d6afd28401aa47801270e82021 ]

When CONFIG_RODATA_FULL_DEFAULT_ENABLED=y, passing "rodata=on" on the
kernel command-line (rather than "rodata=full") should turn off the
"full" behaviour, leaving writable linear aliases of read-only kernel
memory. Unfortunately, the option has no effect in this situation and
the only way to disable the "rodata=full" behaviour is to disable rodata
protection entirely by passing "rodata=off".

Fix this by parsing the "on" and "off" options in the arch code,
additionally enforcing that 'rodata_full' cannot be set without also
setting 'rodata_enabled', allowing us to simplify a couple of checks
in the process.

Fixes: 2e8cff0a0eee ("arm64: fix rodata=full")
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Reviewed-by: "Russell King (Oracle)" <rmk+kernel@armlinux.org.uk>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20231117131422.29663-1-will@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mm,kfence: decouple kfence from page granularity mapping judgement

[ Upstream commit bfa7965b33ab79fc3b2f8adc14704075fe2416cd ]

Kfence only needs its pool to be mapped as page granularity, if it is
inited early. Previous judgement was a bit over protected. From [1], Mark
suggested to "just map the KFENCE region a page granularity". So I
decouple it from judgement and do page granularity mapping for kfence
pool only. Need to be noticed that late init of kfence pool still requires
page granularity mapping.

Page granularity mapping in theory cost more(2M per 1GB) memory on arm64
platform. Like what I've tested on QEMU(emulated 1GB RAM) with
gki_defconfig, also turning off rodata protection:
Before:
[root@liebao ]# cat /proc/meminfo
MemTotal:         999484 kB
After:
[root@liebao ]# cat /proc/meminfo
MemTotal:        1001480 kB

To implement this, also relocate the kfence pool allocation before the
linear mapping setting up, arm64_kfence_alloc_pool is to allocate phys
addr, __kfence_pool is to be set after linear mapping set up.

LINK: [1] https://lore.kernel.org/linux-arm-kernel/Y+IsdrvDNILA59UN@FVFF77S0Q05N/
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Zhenhua Huang <quic_zhenhuah@quicinc.com>
Reviewed-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reviewed-by: Marco Elver <elver@google.com>
Link: https://lore.kernel.org/r/1679066974-690-1-git-send-email-quic_zhenhuah@quicinc.com
Signed-off-by: Will Deacon <will@kernel.org>
Stable-dep-of: acfa60dbe038 ("arm64: mm: Fix "rodata=on" when CONFIG_RODATA_FULL_DEFAULT_ENABLED=y")
Signed-off-by: Sasha Levin <sashal@kernel.org>

afs: Fix file locking on R/O volumes to operate in local mode

[ Upstream commit b590eb41be766c5a63acc7e8896a042f7a4e8293 ]

AFS doesn't really do locking on R/O volumes as fileservers don't maintain
state with each other and thus a lock on a R/O volume file on one
fileserver will not be be visible to someone looking at the same file on
another fileserver.

Further, the server may return an error if you try it.

Fix this by doing what other AFS clients do and handle filelocking on R/O
volume files entirely within the client and don't touch the server.

Fixes: 6c6c1d63c243 ("afs: Provide mount-time configurable byte-range file locking emulation")
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

afs: Return ENOENT if no cell DNS record can be found

[ Upstream commit 0167236e7d66c5e1e85d902a6abc2529b7544539 ]

Make AFS return error ENOENT if no cell SRV or AFSDB DNS record (or
cellservdb config file record) can be found rather than returning
EDESTADDRREQ.

Also add cell name lookup info to the cursor dump.

Fixes: d5c32c89b208 ("afs: Fix cell DNS lookup")
Reported-by: Markus Suvanto <markus.suvanto@gmail.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216637
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: axienet: Fix check for partial TX checksum

[ Upstream commit fd0413bbf8b11f56e8aa842783b0deda0dfe2926 ]

Due to a typo, the code checked the RX checksum feature in the TX path.

Fixes: 8a3b7a252dca ("drivers/net/ethernet/xilinx: added Xilinx AXI Ethernet driver")
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Link: https://lore.kernel.org/r/20231122004219.3504219-1-samuel.holland@sifive.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

amd-xgbe: propagate the correct speed and duplex status

[ Upstream commit 7a2323ac24a50311f64a3a9b54ed5bef5821ecae ]

xgbe_get_link_ksettings() does not propagate correct speed and duplex
information to ethtool during cable unplug. Due to which ethtool reports
incorrect values for speed and duplex.

Address this by propagating correct information.

Fixes: 7c12aa08779c ("amd-xgbe: Move the PHY support into amd-xgbe")
Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

amd-xgbe: handle the corner-case during tx completion

[ Upstream commit 7121205d5330c6a3cb3379348886d47c77b78d06 ]

The existing implementation uses software logic to accumulate tx
completions until the specified time (1ms) is met and then poll them.
However, there exists a tiny gap which leads to a race between
resetting and checking the tx_activate flag. Due to this the tx
completions are not reported to upper layer and tx queue timeout
kicks-in restarting the device.

To address this, introduce a tx cleanup mechanism as part of the
periodic maintenance process.

Fixes: c5aa9e3b8156 ("amd-xgbe: Initial AMD 10GbE platform driver")
Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

amd-xgbe: handle corner-case during sfp hotplug

[ Upstream commit 676ec53844cbdf2f47e68a076cdff7f0ec6cbe3f ]

Force the mode change for SFI in Fixed PHY configurations. Fixed PHY
configurations needs PLL to be enabled while doing mode set. When the
SFP module isn't connected during boot, driver assumes AN is ON and
attempts auto-negotiation. However, if the connected SFP comes up in
Fixed PHY configuration the link will not come up as PLL isn't enabled
while the initial mode set command is issued. So, force the mode change
for SFI in Fixed PHY configuration to fix link issues.

Fixes: e57f7a3feaef ("amd-xgbe: Prepare for working with more than one type of phy")
Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

octeontx2-pf: Fix ntuple rule creation to direct packet to VF with higher Rx queue than its PF

[ Upstream commit 4aa1d8f89b10cdc25a231dabf808d8935e0b137a ]

It is possible to add a ntuple rule which would like to direct packet to
a VF whose number of queues are greater/less than its PF's queue numbers.
For example a PF can have 2 Rx queues but a VF created on that PF can have
8 Rx queues. As of today, ntuple rule will reject rule because it is
checking the requested queue number against PF's number of Rx queues.
As a part of this fix if the action of a ntuple rule is to move a packet
to a VF's queue then the check is removed. Also, a debug information is
printed to aware user that it is user's responsibility to cross check if
the requested queue number on that VF is a valid one.

Fixes: f0a1913f8a6f ("octeontx2-pf: Add support for ethtool ntuple filters")
Signed-off-by: Suman Ghosh <sumang@marvell.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20231121165624.3664182-1-sumang@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm/xen: fix xen_vcpu_info allocation alignment

[ Upstream commit 7bf9a6b46549852a37e6d07e52c601c3c706b562 ]

xen_vcpu_info is a percpu area than needs to be mapped by Xen.
Currently, it could cross a page boundary resulting in Xen being unable
to map it:

[    0.567318] kernel BUG at arch/arm64/xen/../../arm/xen/enlighten.c:164!
[    0.574002] Internal error: Oops - BUG: 00000000f2000800 [#1] PREEMPT SMP

Fix the issue by using __alloc_percpu and requesting alignment for the
memory allocation.

Signed-off-by: Stefano Stabellini <stefano.stabellini@amd.com>
Link: https://lore.kernel.org/r/alpine.DEB.2.22.394.2311221501340.2053963@ubuntu-linux-20-04-desktop
Fixes: 24d5373dda7c ("arm/xen: Use alloc_percpu rather than __alloc_percpu")
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/smc: avoid data corruption caused by decline

[ Upstream commit e6d71b437abc2f249e3b6a1ae1a7228e09c6e563 ]

We found a data corruption issue during testing of SMC-R on Redis
applications.

The benchmark has a low probability of reporting a strange error as
shown below.

"Error: Protocol error, got "\xe2" as reply type byte"

Finally, we found that the retrieved error data was as follows:

0xE2 0xD4 0xC3 0xD9 0x04 0x00 0x2C 0x20 0xA6 0x56 0x00 0x16 0x3E 0x0C
0xCB 0x04 0x02 0x01 0x00 0x00 0x20 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0xE2

It is quite obvious that this is a SMC DECLINE message, which means that
the applications received SMC protocol message.
We found that this was caused by the following situations:

client                  server
        ¦  clc proposal
        ------------->
        ¦  clc accept
        <-------------
        ¦  clc confirm
        ------------->
wait llc confirm
send llc confirm
        ¦failed llc confirm
        ¦   x------
(after 2s)timeout
                        wait llc confirm rsp

wait decline

(after 1s) timeout
                        (after 2s) timeout
        ¦   decline
        -------------->
        ¦   decline
        <--------------

As a result, a decline message was sent in the implementation, and this
message was read from TCP by the already-fallback connection.

This patch double the client timeout as 2x of the server value,
With this simple change, the Decline messages should never cross or
collide (during Confirm link timeout).

This issue requires an immediate solution, since the protocol updates
involve a more long-term solution.

Fixes: 0fb0b02bd6fd ("net/smc: adapt SMC client code to use the LLC flow")
Signed-off-by: D. Wythe <alibuda@linux.alibaba.com>
Reviewed-by: Wen Gu <guwen@linux.alibaba.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: usb: ax88179_178a: fix failed operations during ax88179_reset

[ Upstream commit 0739af07d1d947af27c877f797cb82ceee702515 ]

Using generic ASIX Electronics Corp. AX88179 Gigabit Ethernet device,
the following test cycle has been implemented:
    - power on
    - check logs
    - shutdown
    - after detecting the system shutdown, disconnect power
    - after approximately 60 seconds of sleep, power is restored
Running some cycles, sometimes error logs like this appear:
    kernel: ax88179_178a 2-9:1.0 (unnamed net_device) (uninitialized): Failed to write reg index 0x0001: -19
    kernel: ax88179_178a 2-9:1.0 (unnamed net_device) (uninitialized): Failed to read reg index 0x0001: -19
    ...
These failed operation are happening during ax88179_reset execution, so
the initialization could not be correct.

In order to avoid this, we need to increase the delay after reset and
clock initial operations. By using these larger values, many cycles
have been run and no failed operations appear.

It would be better to check some status register to verify when the
operation has finished, but I do not have found any available information
(neither in the public datasheets nor in the manufacturer's driver). The
only available information for the necessary delays is the maufacturer's
driver (original values) but the proposed values are not enough for the
tested devices.

Fixes: e2ca90c276e1f ("ax88179_178a: ASIX AX88179_178A USB 3.0/2.0 to gigabit ethernet adapter driver")
Reported-by: Herb Wei <weihao.bj@ieisystem.com>
Tested-by: Herb Wei <weihao.bj@ieisystem.com>
Signed-off-by: Jose Ignacio Tornos Martinez <jtornosm@redhat.com>
Link: https://lore.kernel.org/r/20231120120642.54334-1-jtornosm@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ipv4: Correct/silence an endian warning in __ip_do_redirect

[ Upstream commit c0e2926266af3b5acf28df0a8fc6e4d90effe0bb ]

net/ipv4/route.c:783:46: warning: incorrect type in argument 2 (different base types)
net/ipv4/route.c:783:46:    expected unsigned int [usertype] key
net/ipv4/route.c:783:46:    got restricted __be32 [usertype] new_gw

Fixes: 969447f226b4 ("ipv4: use new_gw for redirect neigh lookup")
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Kunwu Chan <chentao@kylinos.cn>
Link: https://lore.kernel.org/r/20231119141759.420477-1-chentao@kylinos.cn
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HID: fix HID device resource race between HID core and debugging support

[ Upstream commit fc43e9c857b7aa55efba9398419b14d9e35dcc7d ]

hid_debug_events_release releases resources bound to the HID device instance.
hid_device_release releases the underlying HID device instance potentially
before hid_debug_events_release has completed releasing debug resources bound
to the same HID device instance.

Reference count to prevent the HID device instance from being torn down
preemptively when HID debugging support is used. When count reaches zero,
release core resources of HID device instance using hiddev_free.

The crash:

[  120.728477][ T4396] kernel BUG at lib/list_debug.c:53!
[  120.728505][ T4396] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
[  120.739806][ T4396] Modules linked in: bcmdhd dhd_static_buf 8822cu pcie_mhi r8168
[  120.747386][ T4396] CPU: 1 PID: 4396 Comm: hidt_bridge Not tainted 5.10.110 #257
[  120.754771][ T4396] Hardware name: Rockchip RK3588 EVB4 LP4 V10 Board (DT)
[  120.761643][ T4396] pstate: 60400089 (nZCv daIf +PAN -UAO -TCO BTYPE=--)
[  120.768338][ T4396] pc : __list_del_entry_valid+0x98/0xac
[  120.773730][ T4396] lr : __list_del_entry_valid+0x98/0xac
[  120.779120][ T4396] sp : ffffffc01e62bb60
[  120.783126][ T4396] x29: ffffffc01e62bb60 x28: ffffff818ce3a200
[  120.789126][ T4396] x27: 0000000000000009 x26: 0000000000980000
[  120.795126][ T4396] x25: ffffffc012431000 x24: ffffff802c6d4e00
[  120.801125][ T4396] x23: ffffff8005c66f00 x22: ffffffc01183b5b8
[  120.807125][ T4396] x21: ffffff819df2f100 x20: 0000000000000000
[  120.813124][ T4396] x19: ffffff802c3f0700 x18: ffffffc01d2cd058
[  120.819124][ T4396] x17: 0000000000000000 x16: 0000000000000000
[  120.825124][ T4396] x15: 0000000000000004 x14: 0000000000003fff
[  120.831123][ T4396] x13: ffffffc012085588 x12: 0000000000000003
[  120.837123][ T4396] x11: 00000000ffffbfff x10: 0000000000000003
[  120.843123][ T4396] x9 : 455103d46b329300 x8 : 455103d46b329300
[  120.849124][ T4396] x7 : 74707572726f6320 x6 : ffffffc0124b8cb5
[  120.855124][ T4396] x5 : ffffffffffffffff x4 : 0000000000000000
[  120.861123][ T4396] x3 : ffffffc011cf4f90 x2 : ffffff81fee7b948
[  120.867122][ T4396] x1 : ffffffc011cf4f90 x0 : 0000000000000054
[  120.873122][ T4396] Call trace:
[  120.876259][ T4396]  __list_del_entry_valid+0x98/0xac
[  120.881304][ T4396]  hid_debug_events_release+0x48/0x12c
[  120.886617][ T4396]  full_proxy_release+0x50/0xbc
[  120.891323][ T4396]  __fput+0xdc/0x238
[  120.895075][ T4396]  ____fput+0x14/0x24
[  120.898911][ T4396]  task_work_run+0x90/0x148
[  120.903268][ T4396]  do_exit+0x1bc/0x8a4
[  120.907193][ T4396]  do_group_exit+0x8c/0xa4
[  120.911458][ T4396]  get_signal+0x468/0x744
[  120.915643][ T4396]  do_signal+0x84/0x280
[  120.919650][ T4396]  do_notify_resume+0xd0/0x218
[  120.924262][ T4396]  work_pending+0xc/0x3f0

[ Rahul Rameshbabu <sergeantsagara@protonmail.com>: rework changelog ]
Fixes: cd667ce24796 ("HID: use debugfs for events/reports dumping")
Signed-off-by: Charles Yi <be286@163.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/rockchip: vop: Fix color for RGB888/BGR888 format on VOP full

[ Upstream commit bb0a05acd6121ff0e810b44fdc24dbdfaa46b642 ]

Use of DRM_FORMAT_RGB888 and DRM_FORMAT_BGR888 on e.g. RK3288, RK3328
and RK3399 result in wrong colors being displayed.

The issue can be observed using modetest:

  modetest -s <connector_id>@<crtc_id>:1920x1080-60@RG24
  modetest -s <connector_id>@<crtc_id>:1920x1080-60@BG24

Vendor 4.4 kernel apply an inverted rb swap for these formats on VOP
full framework (IP version 3.x) compared to VOP little framework (2.x).

Fix colors by applying different rb swap for VOP full framework (3.x)
and VOP little framework (2.x) similar to vendor 4.4 kernel.

Fixes: 85a359f25388 ("drm/rockchip: Add BGR formats to VOP")
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Tested-by: Diederik de Haas <didi.debian@cknow.org>
Reviewed-by: Christopher Obbard <chris.obbard@collabora.com>
Tested-by: Christopher Obbard <chris.obbard@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231026191500.2994225-1-jonas@kwiboo.se
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/i915: do not clean GT table on error path

[ Upstream commit 0561794b6b642b84b879bf97061c4b4fa692839e ]

The only task of intel_gt_release_all is to zero gt table. Calling
it on error path prevents intel_gt_driver_late_release_all (called from
i915_driver_late_release) to cleanup GTs, causing leakage.
After i915_driver_late_release GT array is not used anymore so
it does not need cleaning at all.

Sample leak report:

BUG i915_request (...): Objects remaining in i915_request on __kmem_cache_shutdown()
...
Object 0xffff888113420040 @offset=64
Allocated in __i915_request_create+0x75/0x610 [i915] age=18339 cpu=1 pid=1454
 kmem_cache_alloc+0x25b/0x270
 __i915_request_create+0x75/0x610 [i915]
 i915_request_create+0x109/0x290 [i915]
 __engines_record_defaults+0xca/0x440 [i915]
 intel_gt_init+0x275/0x430 [i915]
 i915_gem_init+0x135/0x2c0 [i915]
 i915_driver_probe+0x8d1/0xdc0 [i915]

v2: removed whole intel_gt_release_all

Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/8489
Fixes: bec68cc9ea42 ("drm/i915: Prepare for multiple GTs")
Signed-off-by: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231115-dont_clean_gt_on_error_path-v2-1-54250125470a@intel.com
(cherry picked from commit e899505533852bf1da133f2f4c9a9655ff77f7e5)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ata: pata_isapnp: Add missing error check for devm_ioport_map()

[ Upstream commit a6925165ea82b7765269ddd8dcad57c731aa00de ]

Add missing error return check for devm_ioport_map() and return the
error if this function call fails.

Fixes: 0d5ff566779f ("libata: convert to iomap")
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

octeontx2-pf: Fix memory leak during interface down

[ Upstream commit 5f228d7c8a539714c1e9b7e7534f76bb7979f268 ]

During 'ifconfig <netdev> down' one RSS memory was not getting freed.
This patch fixes the same.

Fixes: 81a4362016e7 ("octeontx2-pf: Add RSS multi group support")
Signed-off-by: Suman Ghosh <sumang@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

wireguard: use DEV_STATS_INC()

[ Upstream commit 93da8d75a66568ba4bb5b14ad2833acd7304cd02 ]

wg_xmit() can be called concurrently, KCSAN reported [1]
some device stats updates can be lost.

Use DEV_STATS_INC() for this unlikely case.

[1]
BUG: KCSAN: data-race in wg_xmit / wg_xmit

read-write to 0xffff888104239160 of 8 bytes by task 1375 on cpu 0:
wg_xmit+0x60f/0x680 drivers/net/wireguard/device.c:231
__netdev_start_xmit include/linux/netdevice.h:4918 [inline]
netdev_start_xmit include/linux/netdevice.h:4932 [inline]
xmit_one net/core/dev.c:3543 [inline]
dev_hard_start_xmit+0x11b/0x3f0 net/core/dev.c:3559
...

read-write to 0xffff888104239160 of 8 bytes by task 1378 on cpu 1:
wg_xmit+0x60f/0x680 drivers/net/wireguard/device.c:231
__netdev_start_xmit include/linux/netdevice.h:4918 [inline]
netdev_start_xmit include/linux/netdevice.h:4932 [inline]
xmit_one net/core/dev.c:3543 [inline]
dev_hard_start_xmit+0x11b/0x3f0 net/core/dev.c:3559
...

v2: also change wg_packet_consume_data_done() (Hangbin Liu)
    and wg_packet_purge_staged_packets()

Fixes: e7096c131e51 ("net: WireGuard secure network tunnel")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/panel: simple: Fix Innolux G101ICE-L01 timings

[ Upstream commit 3f9a91b6c00e655d27bd785dcda1742dbdc31bda ]

The Innolux G101ICE-L01 datasheet [1] page 17 table
6.1 INPUT SIGNAL TIMING SPECIFICATIONS
indicates that maximum vertical blanking time is 40 lines.
Currently the driver uses 29 lines.

Fix it, and since this panel is a DE panel, adjust the timings
to make them less hostile to controllers which cannot do 1 px
HSA/VSA, distribute the delays evenly between all three parts.

[1] https://www.data-modul.com/sites/default/files/products/G101ICE-L01-C2-specification-12042389.pdf

Fixes: 1e29b840af9f ("drm/panel: simple: Add Innolux G101ICE-L01 panel")
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231008223256.279196-1-marex@denx.de
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/panel: simple: Fix Innolux G101ICE-L01 bus flags

[ Upstream commit 06fc41b09cfbc02977acd9189473593a37d82d9b ]

Add missing .bus_flags = DRM_BUS_FLAG_DE_HIGH to this panel description,
ones which match both the datasheet and the panel display_timing flags .

Fixes: 1e29b840af9f ("drm/panel: simple: Add Innolux G101ICE-L01 panel")
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231008223315.279215-1-marex@denx.de
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/panel: auo,b101uan08.3: Fine tune the panel power sequence

[ Upstream commit 6965809e526917b73c8f9178173184dcf13cec4b ]

For "auo,b101uan08.3" this panel, it is stipulated in the panel spec that
MIPI needs to keep the LP11 state before the lcm_reset pin is pulled high.

Fixes: 56ad624b4cb5 ("drm/panel: support for auo, b101uan08.3 wuxga dsi video mode panel")
Signed-off-by: Xuxin Xiong <xuxinxiong@huaqin.corp-partner.google.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231114044205.613421-1-xuxinxiong@huaqin.corp-partner.google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/panel: boe-tv101wum-nl6: Fine tune the panel power sequence

[ Upstream commit 812562b8d881ce6d33fed8052b3a10b718430fb5 ]

For "boe,tv105wum-nw0" this special panel, it is stipulated in
the panel spec that MIPI needs to keep the LP11 state before
the lcm_reset pin is pulled high.

Signed-off-by: Shuijing Li <shuijing.li@mediatek.com>
Signed-off-by: Xinlei Lee <xinlei.lee@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230515094955.15982-3-shuijing.li@mediatek.com
Stable-dep-of: 6965809e5269 ("drm/panel: auo,b101uan08.3: Fine tune the panel power sequence")
Signed-off-by: Sasha Levin <sashal@kernel.org>

afs: Make error on cell lookup failure consistent with OpenAFS

[ Upstream commit 2a4ca1b4b77850544408595e2433f5d7811a9daa ]

When kafs tries to look up a cell in the DNS or the local config, it will
translate a lookup failure into EDESTADDRREQ whereas OpenAFS translates it
into ENOENT.  Applications such as West expect the latter behaviour and
fail if they see the former.

This can be seen by trying to mount an unknown cell:

   # mount -t afs %example.com:cell.root /mnt
   mount: /mnt: mount(2) system call failed: Destination address required.

Fixes: 4d673da14533 ("afs: Support the AFS dynamic root")
Reported-by: Markus Suvanto <markus.suvanto@gmail.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216637
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeffrey Altman <jaltman@auristor.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

afs: Fix afs_server_list to be cleaned up with RCU

[ Upstream commit e6bace7313d61e31f2b16fa3d774fd8cb3cb869e ]

afs_server_list is accessed with the rcu_read_lock() held from
volume->servers, so it needs to be cleaned up correctly.

Fix this by using kfree_rcu() instead of kfree().

Fixes: 8a070a964877 ("afs: Detect cell aliases 1 - Cells with root volumes")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

Linux 6.1.64

Link: https://lore.kernel.org/r/20231124172010.413667921@linuxfoundation.org
Tested-by: Salvatore Bonaccorso <carnil@debian.org>
Link: https://lore.kernel.org/r/20231125163140.940904812@linuxfoundation.org
Tested-by: Ron Economos <re@w6rz.net>
Tested-by: SeongJae Park <sj@kernel.org>
Tested-by: Pavel Machek (CIP) <pavel@denx.de>
Link: https://lore.kernel.org/r/20231125194359.201910779@linuxfoundation.org
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Tested-by: Pavel Machek (CIP) <pavel@denx.de>
Link: https://lore.kernel.org/r/20231126154359.953633996@linuxfoundation.org
Tested-by: SeongJae Park <sj@kernel.org>
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Tested-by: Nam Cao <namcao@linutronix.de>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Tested-by: Allen Pais <apais@linux.microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

RISC-V: drop error print from riscv_hartid_to_cpuid()

commit 52909f1768023656d5c429873e2246a134289a95 upstream.

As of commit 2ac874343749 ("RISC-V: split early & late of_node to
hartid mapping") my CI complains about newly added pr_err() messages
during boot, for example:
[    0.000000] Couldn't find cpu id for hartid [0]
[    0.000000] riscv-intc: unable to find hart id for /cpus/cpu@0/interrupt-controller

Before the split, riscv_of_processor_hartid() contained a check for
whether the cpu was "available", before calling riscv_hartid_to_cpuid(),
but after the split riscv_of_processor_hartid() can be called for cpus
that are disabled.

Most callers of riscv_hartid_to_cpuid() already report custom errors
where it falls, making this print superfluous in those case. In other
places, the print adds nothing - see riscv_intc_init() for example.

Fixes: 2ac874343749 ("RISC-V: split early & late of_node to hartid mapping")
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230629-paternity-grafted-b901b76d04a0@wendy
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cxl/port: Fix NULL pointer access in devm_cxl_add_port()

commit a70fc4ed20a6118837b0aecbbf789074935f473b upstream.

In devm_cxl_add_port() the port creation may fail and its associated
pointer does not contain a valid address. During error message
generation this invalid port address is used. Fix that wrong address
access.

Fixes: f3cd264c4ec1 ("cxl: Unify debug messages when calling devm_cxl_add_port()")
Signed-off-by: Robert Richter <rrichter@amd.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20230519215436.3394532-1-rrichter@amd.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: sdhci-pci-gli: GL9755: Mask the replay timer timeout of AER

commit 85dd3af64965c1c0eb7373b340a1b1f7773586b0 upstream.

Due to a flaw in the hardware design, the GL9755 replay timer frequently
times out when ASPM is enabled. As a result, the warning messages will
often appear in the system log when the system accesses the GL9755
PCI config. Therefore, the replay timer timeout must be masked.

Fixes: 36ed2fd32b2c ("mmc: sdhci-pci-gli: A workaround to allow GL9755 to enter ASPM L1.2")
Signed-off-by: Victor Shih <victor.shih@genesyslogic.com.tw>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Kai-Heng Feng <kai.heng.geng@canonical.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20231107095741.8832-3-victorshihgli@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Victor Shih <victor.shih@genesyslogic.com.tw>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Input: xpad - add VID for Turtle Beach controllers

commit 1999a6b12a3b5c8953fc9ec74863ebc75a1b851d upstream.

This adds support for the Turtle Beach REACT-R and Recon Xbox controllers

Signed-off-by: Vicki Pfau <vi@endrift.com>
Link: https://lore.kernel.org/r/20230225012147.276489-4-vi@endrift.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tracing: Have trace_event_file have ref counters

commit bb32500fb9b78215e4ef6ee8b4345c5f5d7eafb4 upstream.

The following can crash the kernel:

 # cd /sys/kernel/tracing
 # echo 'p:sched schedule' > kprobe_events
 # exec 5>>events/kprobes/sched/enable
 # > kprobe_events
 # exec 5>&-

The above commands:

 1. Change directory to the tracefs directory
 2. Create a kprobe event (doesn't matter what one)
 3. Open bash file descriptor 5 on the enable file of the kprobe event
 4. Delete the kprobe event (removes the files too)
 5. Close the bash file descriptor 5

The above causes a crash!

 BUG: kernel NULL pointer dereference, address: 0000000000000028
 #PF: supervisor read access in kernel mode
 #PF: error_code(0x0000) - not-present page
 PGD 0 P4D 0
 Oops: 0000 [#1] PREEMPT SMP PTI
 CPU: 6 PID: 877 Comm: bash Not tainted 6.5.0-rc4-test-00008-g2c6b6b1029d4-dirty #186
 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.2-debian-1.16.2-1 04/01/2014
 RIP: 0010:tracing_release_file_tr+0xc/0x50

What happens here is that the kprobe event creates a trace_event_file
"file" descriptor that represents the file in tracefs to the event. It
maintains state of the event (is it enabled for the given instance?).
Opening the "enable" file gets a reference to the event "file" descriptor
via the open file descriptor. When the kprobe event is deleted, the file is
also deleted from the tracefs system which also frees the event "file"
descriptor.

But as the tracefs file is still opened by user space, it will not be
totally removed until the final dput() is called on it. But this is not
true with the event "file" descriptor that is already freed. If the user
does a write to or simply closes the file descriptor it will reference the
event "file" descriptor that was just freed, causing a use-after-free bug.

To solve this, add a ref count to the event "file" descriptor as well as a
new flag called "FREED". The "file" will not be freed until the last
reference is released. But the FREE flag will be set when the event is
removed to prevent any more modifications to that event from happening,
even if there's still a reference to the event "file" descriptor.

Link: https://lore.kernel.org/linux-trace-kernel/20231031000031.1e705592@gandalf.local.home/
Link: https://lore.kernel.org/linux-trace-kernel/20231031122453.7a48b923@gandalf.local.home
Cc: stable@vger.kernel.org
Cc: Mark Rutland <mark.rutland@arm.com>
Fixes: f5ca233e2e66d ("tracing: Increase trace array ref count on enable and filter files")
Reported-by: Beau Belgrave <beaub@linux.microsoft.com>
Tested-by: Beau Belgrave <beaub@linux.microsoft.com>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/powernv: Fix fortify source warnings in opal-prd.c

commit feea65a338e52297b68ceb688eaf0ffc50310a83 upstream.

As reported by Mahesh & Aneesh, opal_prd_msg_notifier() triggers a
FORTIFY_SOURCE warning:

  memcpy: detected field-spanning write (size 32) of single field "&item->msg" at arch/powerpc/platforms/powernv/opal-prd.c:355 (size 4)
  WARNING: CPU: 9 PID: 660 at arch/powerpc/platforms/powernv/opal-prd.c:355 opal_prd_msg_notifier+0x174/0x188 [opal_prd]
  NIP opal_prd_msg_notifier+0x174/0x188 [opal_prd]
  LR  opal_prd_msg_notifier+0x170/0x188 [opal_prd]
  Call Trace:
    opal_prd_msg_notifier+0x170/0x188 [opal_prd] (unreliable)
    notifier_call_chain+0xc0/0x1b0
    atomic_notifier_call_chain+0x2c/0x40
    opal_message_notify+0xf4/0x2c0

This happens because the copy is targeting item->msg, which is only 4
bytes in size, even though the enclosing item was allocated with extra
space following the msg.

To fix the warning define struct opal_prd_msg with a union of the header
and a flex array, and have the memcpy target the flex array.

Reported-by: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com>
Reported-by: Mahesh Salgaonkar <mahesh@linux.ibm.com>
Tested-by: Mahesh Salgaonkar <mahesh@linux.ibm.com>
Reviewed-by: Mahesh Salgaonkar <mahesh@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230821142820.497107-1-mpe@ellerman.id.au
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amd/display: Change the DMCUB mailbox memory location from FB to inbox

commit 5911d02cac70d7fb52009fbd37423e63f8f6f9bc upstream.

[WHY]
Flush command sent to DMCUB spends more time for execution on
a dGPU than on an APU. This causes cursor lag when using high
refresh rate mouses.

[HOW]
1. Change the DMCUB mailbox memory location from FB to inbox.
2. Only change windows memory to inbox.

Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Lewis Huang <lewis.huang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amd/display: Enable fast plane updates on DCN3.2 and above

commit 435f5b369657cffee4b04db1f5805b48599f4dbe upstream.

[WHY]
When cursor moves across screen boarder, lag cursor observed,
since subvp settings need to sync up with vblank that causes
cursor updates being delayed.

[HOW]
Enable fast plane updates on DCN3.2 to fix it.

Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Tianci Yin <tianci.yin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amd/display: fix a NULL pointer dereference in amdgpu_dm_i2c_xfer()

commit b71f4ade1b8900d30c661d6c27f87c35214c398c upstream.

When ddc_service_construct() is called, it explicitly checks both the
link type and whether there is something on the link which will
dictate whether the pin is marked as hw_supported.

If the pin isn't set or the link is not set (such as from
unloading/reloading amdgpu in an IGT test) then fail the
amdgpu_dm_i2c_xfer() call.

Cc: stable@vger.kernel.org
Fixes: 22676bc500c2 ("drm/amd/display: Fix dmub soft hang for PSR 1")
Link: https://github.com/fwupd/fwupd/issues/6327
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu: lower CS errors to debug severity

commit 17daf01ab4e3e5a5929747aa05cc15eb2bad5438 upstream.

Otherwise userspace can spam the logs by using incorrect input values.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu: fix error handling in amdgpu_bo_list_get()

commit 12f76050d8d4d10dab96333656b821bd4620d103 upstream.

We should not leak the pointer where we couldn't grab the reference
on to the caller because it can be that the error handling still
tries to put the reference then.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu: don't use ATRM for external devices

commit 432e664e7c98c243fab4c3c95bd463bea3aeed28 upstream.

The ATRM ACPI method is for fetching the dGPU vbios rom
image on laptops and all-in-one systems.  It should not be
used for external add in cards.  If the dGPU is thunderbolt
connected, don't try ATRM.

v2: pci_is_thunderbolt_attached only works for Intel.  Use
    pdev->external_facing instead.
v3: dev_is_removable() seems to be what we want

Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2925
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu: don't use pci_is_thunderbolt_attached()

commit 7b1c6263eaf4fd64ffe1cafdc504a42ee4bfbb33 upstream.

It's only valid on Intel systems with the Intel VSEC.
Use dev_is_removable() instead.  This should do the right
thing regardless of the platform.

Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2925
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu/smu13: drop compute workload workaround

commit 23170863ea0a0965d224342c0eb2ad8303b1f267 upstream.

This was fixed in PMFW before launch and is no longer
required.

Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.1.x
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amd/pm: Fix error of MACO flag setting code

commit 7f3e6b840fa8b0889d776639310a5dc672c1e9e1 upstream.

MACO only works if BACO is supported

Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.1.x
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i915: Fix potential spectre vulnerability

commit 1a8e9bad6ef563c28ab0f8619628d5511be55431 upstream.

Fix smatch warning:
drivers/gpu/drm/i915/gem/i915_gem_context.c:847 set_proto_ctx_sseu()
warn: potential spectre issue 'pc->user_engines' [r] (local cap)

Fixes: d4433c7600f7 ("drm/i915/gem: Use the proto-context to handle create parameters (v5)")
Cc: <stable@vger.kernel.org> # v5.15+
Signed-off-by: Kunwu Chan <chentao@kylinos.cn>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231103110922.430122-1-tvrtko.ursulin@linux.intel.com
(cherry picked from commit 27b086382c22efb7e0a16442f7bdc2e120108ef3)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i915: Bump GLK CDCLK frequency when driving multiple pipes

commit 0cb89cd42fd22bbdec0b046c48f35775f5b88bdb upstream.

On GLK CDCLK frequency needs to be at least 2*96 MHz when accessing
the audio hardware. Currently we bump the CDCLK frequency up
temporarily (if not high enough already) whenever audio hardware
is being accessed, and drop it back down afterwards.

With a single active pipe this works just fine as we can switch
between all the valid CDCLK frequencies by changing the cd2x
divider, which doesn't require a full modeset. However with
multiple active pipes the cd2x divider trick no longer works,
and thus we end up blinking all displays off and back on.

To avoid this let's just bump the CDCLK frequency to >=2*96MHz
whenever multiple pipes are active. The downside is slightly
higher power consumption, but that seems like an acceptable
tradeoff. With a single active pipe we can stick to the current
more optiomal (from power comsumption POV) behaviour.

Cc: stable@vger.kernel.org
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/9599
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231031160800.18371-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit 451eaa1a614c911f5a51078dcb68022874e4cb12)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amd/pm: Handle non-terminated overdrive commands.

commit 08e9ebc75b5bcfec9d226f9e16bab2ab7b25a39a upstream.

The incoming strings might not be terminated by a newline
or a 0.

(found while testing a program that just wrote the string
 itself, causing a crash)

Cc: stable@vger.kernel.org
Fixes: e3933f26b657 ("drm/amd/pp: Add edit/commit/show OD clock/voltage support in sysfs")
Signed-off-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: properly sync file size update after O_SYNC direct IO

commit 91562895f8030cb9a0470b1db49de79346a69f91 upstream.

Gao Xiang has reported that on ext4 O_SYNC direct IO does not properly
sync file size update and thus if we crash at unfortunate moment, the
file can have smaller size although O_SYNC IO has reported successful
completion. The problem happens because update of on-disk inode size is
handled in ext4_dio_write_iter() *after* iomap_dio_rw() (and thus
dio_complete() in particular) has returned and generic_file_sync() gets
called by dio_complete(). Fix the problem by handling on-disk inode size
update directly in our ->end_io completion handler.

References: https://lore.kernel.org/all/02d18236-26ef-09b0-90ad-030c4fe3ee20@linux.alibaba.com
Reported-by: Gao Xiang <hsiangkao@linux.alibaba.com>
CC: stable@vger.kernel.org
Fixes: 378f32bab371 ("ext4: introduce direct I/O write using iomap infrastructure")
Signed-off-by: Jan Kara <jack@suse.cz>
Tested-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Reviewed-by: "Ritesh Harjani (IBM)" <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/20231013121350.26872-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: add missed brelse in update_backups

commit 9adac8b01f4be28acd5838aade42b8daa4f0b642 upstream.

add missed brelse in update_backups

Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20230826174712.4059355-3-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: remove gdb backup copy for meta bg in setup_new_flex_group_blocks

commit 40dd7953f4d606c280074f10d23046b6812708ce upstream.

Wrong check of gdb backup in meta bg as following:
first_group is the first group of meta_bg which contains target group, so
target group is always >= first_group. We check if target group has gdb
backup by comparing first_group with [group + 1] and [group +
EXT4_DESC_PER_BLOCK(sb) - 1]. As group >= first_group, then [group + N] is
> first_group. So no copy of gdb backup in meta bg is done in
setup_new_flex_group_blocks.

No need to do gdb backup copy in meta bg from setup_new_flex_group_blocks
as we always copy updated gdb block to backups at end of
ext4_flex_group_add as following:

ext4_flex_group_add
  /* no gdb backup copy for meta bg any more */
  setup_new_flex_group_blocks

  /* update current group number */
  ext4_update_super
    sbi->s_groups_count += flex_gd->count;

  /*
   * if group in meta bg contains backup is added, the primary gdb block
   * of the meta bg will be copy to backup in new added group here.
   */
  for (; gdb_num <= gdb_num_end; gdb_num++)
    update_backups(...)

In summary, we can remove wrong gdb backup copy code in
setup_new_flex_group_blocks.

Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20230826174712.4059355-5-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: correct the start block of counting reserved clusters

commit 40ea98396a3659062267d1fe5f99af4f7e4f05e3 upstream.

When big allocate feature is enabled, we need to count and update
reserved clusters before removing a delayed only extent_status entry.
{init|count|get}_rsvd() have already done this, but the start block
number of this counting isn't correct in the following case.

  lblk            end
   |               |
   v               v
          -------------------------
          |                       | orig_es
          -------------------------
                   ^              ^
      len1 is 0    |     len2     |

If the start block of the orig_es entry founded is bigger than lblk, we
passed lblk as start block to count_rsvd(), but the length is correct,
finally, the range to be counted is offset. This patch fix this by
passing the start blocks to 'orig_es->lblk + len1'.

Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Cc: stable@kernel.org
Link: https://lore.kernel.org/r/20230824092619.1327976-2-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: correct return value of ext4_convert_meta_bg

commit 48f1551592c54f7d8e2befc72a99ff4e47f7dca0 upstream.

Avoid to ignore error in "err".

Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Link: https://lore.kernel.org/r/20230826174712.4059355-4-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: mark buffer new if it is unwritten to avoid stale data exposure

commit 2cd8bdb5efc1e0d5b11a4b7ba6b922fd2736a87f upstream.

** Short Version **

In ext4 with dioread_nolock, we could have a scenario where the bh returned by
get_blocks (ext4_get_block_unwritten()) in __block_write_begin_int() has
UNWRITTEN and MAPPED flag set. Since such a bh does not have NEW flag set we
never zero out the range of bh that is not under write, causing whatever stale
data is present in the folio at that time to be written out to disk. To fix this
mark the buffer as new, in case it is unwritten, in ext4_get_block_unwritten().

** Long Version **

The issue mentioned above was resulting in two different bugs:

1. On block size < page size case in ext4, generic/269 was reliably
failing with dioread_nolock. The state of the write was as follows:

  * The write was extending i_size.
  * The last block of the file was fallocated and had an unwritten extent
  * We were near ENOSPC and hence we were switching to non-delayed alloc
    allocation.

In this case, the back trace that triggers the bug is as follows:

  ext4_da_write_begin()
    /* switch to nodelalloc due to low space */
    ext4_write_begin()
      ext4_should_dioread_nolock() // true since mount flags still have delalloc
      __block_write_begin(..., ext4_get_block_unwritten)
        __block_write_begin_int()
          for(each buffer head in page) {
            /* first iteration, this is bh1 which contains i_size */
            if (!buffer_mapped)
              get_block() /* returns bh with only UNWRITTEN and MAPPED */
            /* second iteration, bh2 */
              if (!buffer_mapped)
                get_block() /* we fail here, could be ENOSPC */
          }
          if (err)
            /*
             * this would zero out all new buffers and mark them uptodate.
             * Since bh1 was never marked new, we skip it here which causes
             * the bug later.
             */
            folio_zero_new_buffers();
      /* ext4_wrte_begin() error handling */
      ext4_truncate_failed_write()
        ext4_truncate()
          ext4_block_truncate_page()
            __ext4_block_zero_page_range()
              if(!buffer_uptodate())
                ext4_read_bh_lock()
                  ext4_read_bh() -> ... ext4_submit_bh_wbc()
                    BUG_ON(buffer_unwritten(bh)); /* !!! */

2. The second issue is stale data exposure with page size >= blocksize
with dioread_nolock. The conditions needed for it to happen are same as
the previous issue ie dioread_nolock around ENOSPC condition. The issue
is also similar where in __block_write_begin_int() when we call
ext4_get_block_unwritten() on the buffer_head and the underlying extent
is unwritten, we get an unwritten and mapped buffer head. Since it is
not new, we never zero out the partial range which is not under write,
thus writing stale data to disk. This can be easily observed with the
following reproducer:

 fallocate -l 4k testfile
 xfs_io -c "pwrite 2k 2k" testfile
 # hexdump output will have stale data in from byte 0 to 2k in testfile
 hexdump -C testfile

NOTE: To trigger this, we need dioread_nolock enabled and write happening via
ext4_write_begin(), which is usually used when we have -o nodealloc. Since
dioread_nolock is disabled with nodelalloc, the only alternate way to call
ext4_write_begin() is to ensure that delayed alloc switches to nodelalloc ie
ext4_da_write_begin() calls ext4_write_begin(). This will usually happen when
ext4 is almost full like the way generic/269 was triggering it in Issue 1 above.
This might make the issue harder to hit. Hence, for reliable replication, I used
the below patch to temporarily allow dioread_nolock with nodelalloc and then
mount the disk with -o nodealloc,dioread_nolock. With this you can hit the stale
data issue 100% of times:

@@ -508,8 +508,8 @@ static inline int ext4_should_dioread_nolock(struct inode *inode)
  if (ext4_should_journal_data(inode))
    return 0;
  /* temporary fix to prevent generic/422 test failures */
- if (!test_opt(inode->i_sb, DELALLOC))
-   return 0;
+ // if (!test_opt(inode->i_sb, DELALLOC))
+ //  return 0;
  return 1;
 }

After applying this patch to mark buffer as NEW, both the above issues are
fixed.

Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Cc: stable@kernel.org
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: "Ritesh Harjani (IBM)" <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/d0ed09d70a9733fbb5349c5c7b125caac186ecdf.1695033645.git.ojaswin@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: correct offset of gdb backup in non meta_bg group to update_backups

commit 31f13421c004a420c0e9d288859c9ea9259ea0cc upstream.

Commit 0aeaa2559d6d5 ("ext4: fix corruption when online resizing a 1K
bigalloc fs") found that primary superblock's offset in its group is
not equal to offset of backup superblock in its group when block size
is 1K and bigalloc is enabled. As group descriptor blocks are right
after superblock, we can't pass block number of gdb to update_backups
for the same reason.

The root casue of the issue above is that leading 1K padding block is
count as data block offset for primary block while backup block has no
padding block offset in its group.

Remove padding data block count to fix the issue for gdb backups.

For meta_bg case, update_backups treat blk_off as block number, do no
conversion in this case.

Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20230826174712.4059355-2-shikemeng@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: apply umask if ACL support is disabled

commit 484fd6c1de13b336806a967908a927cc0356e312 upstream.

The function ext4_init_acl() calls posix_acl_create() which is
responsible for applying the umask.  But without
CONFIG_EXT4_FS_POSIX_ACL, ext4_init_acl() is an empty inline function,
and nobody applies the umask.

This fixes a bug which causes the umask to be ignored with O_TMPFILE
on ext4:

 https://github.com/MusicPlayerDaemon/MPD/issues/558
 https://bugs.gentoo.org/show_bug.cgi?id=686142#c3
 https://bugzilla.kernel.org/show_bug.cgi?id=203625

Reviewed-by: "J. Bruce Fields" <bfields@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Max Kellermann <max.kellermann@ionos.com>
Link: https://lore.kernel.org/r/20230919081824.1096619-1-max.kellermann@ionos.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "net: r8169: Disable multicast filter for RTL8168H and RTL8107E"

commit 6a26310273c323380da21eb23fcfd50e31140913 upstream.

This reverts commit efa5f1311c4998e9e6317c52bc5ee93b3a0f36df.

I couldn't reproduce the reported issue. What I did, based on a pcap
packet log provided by the reporter:
- Used same chip version (RTL8168h)
- Set MAC address to the one used on the reporters system
- Replayed the EAPOL unicast packet that, according to the reporter,
  was filtered out by the mc filter.
The packet was properly received.

Therefore the root cause of the reported issue seems to be somewhere
else. Disabling mc filtering completely for the most common chip
version is a quite big hammer. Therefore revert the change and wait
for further analysis results from the reporter.

Cc: stable@vger.kernel.org
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: qcom: camss: Fix csid-gen2 for test pattern generator

commit 87889f1b7ea40d2544b49c62092e6ef2792dced7 upstream.

In the current driver csid Test Pattern Generator (TPG) doesn't work.
This change:
- fixes writing frame width and height values into CSID_TPG_DT_n_CFG_0
- fixes the shift by one between test_pattern control value and the
  actual pattern.
- drops fixed VC of 0x0a which testing showed prohibited some test
  patterns in the CSID to produce output.
So that TPG starts working, but with the below limitations:
- only test_pattern=9 works as it should
- test_pattern=8 and test_pattern=7 produce black frame (all zeroes)
- the rest of test_pattern's don't work (yavta doesn't get the data)
- regardless of the CFA pattern set by 'media-ctl -V' the actual pixel
  order is always the same (RGGB for any RAW8 or RAW10P format in
  4608x2592 resolution).

Tested with:

RAW10P format, VC0:
 media-ctl -V '"msm_csid0":0[fmt:SRGGB10/4608x2592 field:none]'
 media-ctl -V '"msm_vfe0_rdi0":0[fmt:SRGGB10/4608x2592 field:none]'
 media-ctl -l '"msm_csid0":1->"msm_vfe0_rdi0":0[1]'
 v4l2-ctl -d /dev/v4l-subdev6 -c test_pattern=9
 yavta -B capture-mplane --capture=3 -n 3 -f SRGGB10P -s 4608x2592 /dev/video0

RAW10P format, VC1:
 media-ctl -V '"msm_csid0":2[fmt:SRGGB10/4608x2592 field:none]'
 media-ctl -V '"msm_vfe0_rdi1":0[fmt:SRGGB10/4608x2592 field:none]'
 media-ctl -l '"msm_csid0":2->"msm_vfe0_rdi1":0[1]'
 v4l2-ctl -d /dev/v4l-subdev6 -c test_pattern=9
 yavta -B capture-mplane --capture=3 -n 3 -f SRGGB10P -s 4608x2592 /dev/video1

RAW8 format, VC0:
 media-ctl --reset
 media-ctl -V '"msm_csid0":0[fmt:SRGGB8/4608x2592 field:none]'
 media-ctl -V '"msm_vfe0_rdi0":0[fmt:SRGGB8/4608x2592 field:none]'
 media-ctl -l '"msm_csid0":1->"msm_vfe0_rdi0":0[1]'
 yavta -B capture-mplane --capture=3 -n 3 -f SRGGB8 -s 4608x2592 /dev/video0

Fixes: eebe6d00e9bf ("media: camss: Add support for CSID hardware version Titan 170")
Cc: stable@vger.kernel.org
Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: qcom: camss: Fix invalid clock enable bit disjunction

commit d8f7e1a60d01739a1d78db2b08603089c6cf7c8e upstream.

define CSIPHY_3PH_CMN_CSI_COMMON_CTRL5_CLK_ENABLE BIT(7)

disjunction for gen2 ? BIT(7) : is a nop we are setting the same bit
either way.

Fixes: 4abb21309fda ("media: camss: csiphy: Move to hardcode CSI Clock Lane number")
Cc: stable@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: qcom: camss: Fix missing vfe_lite clocks check

commit b6e1bdca463a932c1ac02caa7d3e14bf39288e0c upstream.

check_clock doesn't account for vfe_lite which means that vfe_lite will
never get validated by this routine. Add the clock name to the expected set
to remediate.

Fixes: 7319cdf189bb ("media: camss: Add support for VFE hardware version Titan 170")
Cc: stable@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: qcom: camss: Fix VFE-480 vfe_disable_output()

commit 7f24d291350426d40b36dfbe6b3090617cdfd37a upstream.

vfe-480 is copied from vfe-17x and has the same racy idle timeout bug as in
17x.

Fix the vfe_disable_output() logic to no longer be racy and to conform
to the 17x way of quiescing and then resetting the VFE.

Fixes: 4edc8eae715c ("media: camss: Add initial support for VFE hardware version Titan 480")
Cc: stable@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: qcom: camss: Fix VFE-17x vfe_disable_output()

commit 3143ad282fc08bf995ee73e32a9e40c527bf265d upstream.

There are two problems with the current vfe_disable_output() routine.

Firstly we rightly use a spinlock to protect output->gen2.active_num
everywhere except for in the IDLE timeout path of vfe_disable_output().
Even if that is not racy "in practice" somehow it is by happenstance not
by design.

Secondly we do not get consistent behaviour from this routine. On
sc8280xp 50% of the time I get "VFE idle timeout - resetting". In this
case the subsequent capture will succeed. The other 50% of the time, we
don't hit the idle timeout, never do the VFE reset and subsequent
captures stall indefinitely.

Rewrite the vfe_disable_output() routine to

- Quiesce write masters with vfe_wm_stop()
- Set active_num = 0

remembering to hold the spinlock when we do so followed by

- Reset the VFE

Testing on sc8280xp and sdm845 shows this to be a valid fix.

Fixes: 7319cdf189bb ("media: camss: Add support for VFE hardware version Titan 170")
Cc: stable@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: qcom: camss: Fix vfe_get() error jump

commit 26bda3da00c3edef727a6acb00ed2eb4b22f8723 upstream.

Right now it is possible to do a vfe_get() with the internal reference
count at 1. If vfe_check_clock_rates() returns non-zero then we will
leave the reference count as-is and

run:
- pm_runtime_put_sync()
- vfe->ops->pm_domain_off()

skip:
- camss_disable_clocks()

Subsequent vfe_put() calls will when the ref-count is non-zero
unconditionally run:

- pm_runtime_put_sync()
- vfe->ops->pm_domain_off()
- camss_disable_clocks()

vfe_get() should not attempt to roll-back on error when the ref-count is
non-zero as the upper layers will still do their own vfe_put() operations.

vfe_put() will drop the reference count and do the necessary power
domain release, the cleanup jumps in vfe_get() should only be run when
the ref-count is zero.

[   50.095796] CPU: 7 PID: 3075 Comm: cam Not tainted 6.3.2+ #80
[   50.095798] Hardware name: LENOVO 21BXCTO1WW/21BXCTO1WW, BIOS N3HET82W (1.54 ) 05/26/2023
[   50.095799] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[   50.095802] pc : refcount_warn_saturate+0xf4/0x148
[   50.095804] lr : refcount_warn_saturate+0xf4/0x148
[   50.095805] sp : ffff80000c7cb8b0
[   50.095806] x29: ffff80000c7cb8b0 x28: ffff16ecc0e3fc10 x27: 0000000000000000
[   50.095810] x26: 0000000000000000 x25: 0000000000020802 x24: 0000000000000000
[   50.095813] x23: ffff16ecc7360640 x22: 00000000ffffffff x21: 0000000000000005
[   50.095815] x20: ffff16ed175f4400 x19: ffffb4d9852942a8 x18: ffffffffffffffff
[   50.095818] x17: ffffb4d9852d4a48 x16: ffffb4d983da5db8 x15: ffff80000c7cb320
[   50.095821] x14: 0000000000000001 x13: 2e656572662d7265 x12: 7466612d65737520
[   50.095823] x11: 00000000ffffefff x10: ffffb4d9850cebf0 x9 : ffffb4d9835cf954
[   50.095826] x8 : 0000000000017fe8 x7 : c0000000ffffefff x6 : 0000000000057fa8
[   50.095829] x5 : ffff16f813fe3d08 x4 : 0000000000000000 x3 : ffff621e8f4d2000
[   50.095832] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff16ed32119040
[   50.095835] Call trace:
[   50.095836]  refcount_warn_saturate+0xf4/0x148
[   50.095838]  device_link_put_kref+0x84/0xc8
[   50.095843]  device_link_del+0x38/0x58
[   50.095846]  vfe_pm_domain_off+0x3c/0x50 [qcom_camss]
[   50.095860]  vfe_put+0x114/0x140 [qcom_camss]
[   50.095869]  csid_set_power+0x2c8/0x408 [qcom_camss]
[   50.095878]  pipeline_pm_power_one+0x164/0x170 [videodev]
[   50.095896]  pipeline_pm_power+0xc4/0x110 [videodev]
[   50.095909]  v4l2_pipeline_pm_use+0x5c/0xa0 [videodev]
[   50.095923]  v4l2_pipeline_pm_get+0x1c/0x30 [videodev]
[   50.095937]  video_open+0x7c/0x100 [qcom_camss]
[   50.095945]  v4l2_open+0x84/0x130 [videodev]
[   50.095960]  chrdev_open+0xc8/0x250
[   50.095964]  do_dentry_open+0x1bc/0x498
[   50.095966]  vfs_open+0x34/0x40
[   50.095968]  path_openat+0xb44/0xf20
[   50.095971]  do_filp_open+0xa4/0x160
[   50.095974]  do_sys_openat2+0xc8/0x188
[   50.095975]  __arm64_sys_openat+0x6c/0xb8
[   50.095977]  invoke_syscall+0x50/0x128
[   50.095982]  el0_svc_common.constprop.0+0x4c/0x100
[   50.095985]  do_el0_svc+0x40/0xa8
[   50.095988]  el0_svc+0x2c/0x88
[   50.095991]  el0t_64_sync_handler+0xf4/0x120
[   50.095994]  el0t_64_sync+0x190/0x198
[   50.095996] ---[ end trace 0000000000000000 ]---

Fixes: 779096916dae ("media: camss: vfe: Fix runtime PM imbalance on error")
Cc: stable@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: qcom: camss: Fix pm_domain_on sequence in probe

commit 7405116519ad70b8c7340359bfac8db8279e7ce4 upstream.

We need to make sure camss_configure_pd() happens before
camss_register_entities() as the vfe_get() path relies on the pointer
provided by camss_configure_pd().

Fix the ordering sequence in probe to ensure the pointers vfe_get() demands
are present by the time camss_register_entities() runs.

In order to facilitate backporting to stable kernels I've moved the
configure_pd() call pretty early on the probe() function so that
irrespective of the existence of the old error handling jump labels this
patch should still apply to -next circa Aug 2023 to v5.13 inclusive.

Fixes: 2f6f8af67203 ("media: camss: Refactor VFE power domain toggling")
Cc: stable@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: sdhci-pci-gli: GL9750: Mask the replay timer timeout of AER

commit 015c9cbcf0ad709079117d27c2094a46e0eadcdb upstream.

Due to a flaw in the hardware design, the GL9750 replay timer frequently
times out when ASPM is enabled. As a result, the warning messages will
often appear in the system log when the system accesses the GL9750
PCI config. Therefore, the replay timer timeout must be masked.

Fixes: d7133797e9e1 ("mmc: sdhci-pci-gli: A workaround to allow GL9750 to enter ASPM L1.2")
Signed-off-by: Victor Shih <victor.shih@genesyslogic.com.tw>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Kai-Heng Feng <kai.heng.geng@canonical.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20231107095741.8832-2-victorshihgli@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

r8169: add handling DASH when DASH is disabled

commit 0ab0c45d8aaea5192328bfa6989673aceafc767c upstream.

For devices that support DASH, even DASH is disabled, there may still
exist a default firmware that will influence device behavior.
So driver needs to handle DASH for devices that support DASH, no
matter the DASH status is.

This patch also prepares for "fix network lost after resume on DASH
systems".

Fixes: ee7a1beb9759 ("r8169:call "rtl8168_driver_start" "rtl8168_driver_stop" only when hardware dash function is enabled")
Cc: stable@vger.kernel.org
Signed-off-by: ChunHao Lin <hau@realtek.com>
Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/20231109173400.4573-2-hau@realtek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

r8169: fix network lost after resume on DASH systems

commit 868c3b95afef4883bfb66c9397482da6840b5baf upstream.

Device that support DASH may be reseted or powered off during suspend.
So driver needs to handle DASH during system suspend and resume. Or
DASH firmware will influence device behavior and causes network lost.

Fixes: b646d90053f8 ("r8169: magic.")
Cc: stable@vger.kernel.org
Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: ChunHao Lin <hau@realtek.com>
Link: https://lore.kernel.org/r/20231109173400.4573-3-hau@realtek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mptcp: fix setsockopt(IP_TOS) subflow locking

commit 7679d34f97b7a09fd565f5729f79fd61b7c55329 upstream.

The MPTCP implementation of the IP_TOS socket option uses the lockless
variant of the TOS manipulation helper and does not hold such lock at
the helper invocation time.

Add the required locking.

Fixes: ffcacff87cd6 ("mptcp: Support for IP_TOS for MPTCP setsockopt()")
Cc: stable@vger.kernel.org
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/457
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20231114-upstream-net-20231113-mptcp-misc-fixes-6-7-rc2-v1-4-7b9cd6a7b7f4@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mptcp: add validity check for sending RM_ADDR

commit 8df220b29282e8b450ea57be62e1eccd4996837c upstream.

This patch adds the validity check for sending RM_ADDRs for userspace PM
in mptcp_pm_remove_addrs(), only send a RM_ADDR when the address is in the
anno_list or conn_list.

Fixes: 8b1c94da1e48 ("mptcp: only send RM_ADDR in nl_cmd_remove")
Cc: stable@vger.kernel.org
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20231114-upstream-net-20231113-mptcp-misc-fixes-6-7-rc2-v1-3-7b9cd6a7b7f4@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mptcp: deal with large GSO size

commit 9fce92f050f448a0d1ddd9083ef967d9930f1e52 upstream.

After the blamed commit below, the TCP sockets (and the MPTCP subflows)
can build egress packets larger than 64K. That exceeds the maximum DSS
data size, the length being misrepresent on the wire and the stream being
corrupted, as later observed on the receiver:

  WARNING: CPU: 0 PID: 9696 at net/mptcp/protocol.c:705 __mptcp_move_skbs_from_subflow+0x2604/0x26e0
  CPU: 0 PID: 9696 Comm: syz-executor.7 Not tainted 6.6.0-rc5-gcd8bdf563d46 #45
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2.el7 04/01/2014
  netlink: 8 bytes leftover after parsing attributes in process `syz-executor.4'.
  RIP: 0010:__mptcp_move_skbs_from_subflow+0x2604/0x26e0 net/mptcp/protocol.c:705
  RSP: 0018:ffffc90000006e80 EFLAGS: 00010246
  RAX: ffffffff83e9f674 RBX: ffff88802f45d870 RCX: ffff888102ad0000
  netlink: 8 bytes leftover after parsing attributes in process `syz-executor.4'.
  RDX: 0000000080000303 RSI: 0000000000013908 RDI: 0000000000003908
  RBP: ffffc90000007110 R08: ffffffff83e9e078 R09: 1ffff1100e548c8a
  R10: dffffc0000000000 R11: ffffed100e548c8b R12: 0000000000013908
  R13: dffffc0000000000 R14: 0000000000003908 R15: 000000000031cf29
  FS:  00007f239c47e700(0000) GS:ffff88811b200000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 00007f239c45cd78 CR3: 000000006a66c006 CR4: 0000000000770ef0
  DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000600
  PKRU: 55555554
  Call Trace:
   <IRQ>
   mptcp_data_ready+0x263/0xac0 net/mptcp/protocol.c:819
   subflow_data_ready+0x268/0x6d0 net/mptcp/subflow.c:1409
   tcp_data_queue+0x21a1/0x7a60 net/ipv4/tcp_input.c:5151
   tcp_rcv_established+0x950/0x1d90 net/ipv4/tcp_input.c:6098
   tcp_v6_do_rcv+0x554/0x12f0 net/ipv6/tcp_ipv6.c:1483
   tcp_v6_rcv+0x2e26/0x3810 net/ipv6/tcp_ipv6.c:1749
   ip6_protocol_deliver_rcu+0xd6b/0x1ae0 net/ipv6/ip6_input.c:438
   ip6_input+0x1c5/0x470 net/ipv6/ip6_input.c:483
   ipv6_rcv+0xef/0x2c0 include/linux/netfilter.h:304
   __netif_receive_skb+0x1ea/0x6a0 net/core/dev.c:5532
   process_backlog+0x353/0x660 net/core/dev.c:5974
   __napi_poll+0xc6/0x5a0 net/core/dev.c:6536
   net_rx_action+0x6a0/0xfd0 net/core/dev.c:6603
   __do_softirq+0x184/0x524 kernel/softirq.c:553
   do_softirq+0xdd/0x130 kernel/softirq.c:454

Address the issue explicitly bounding the maximum GSO size to what MPTCP
actually allows.

Reported-by: Christoph Paasch <cpaasch@apple.com>
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/450
Fixes: 7c4e983c4f3c ("net: allow gso_max_size to exceed 65536")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20231114-upstream-net-20231113-mptcp-misc-fixes-6-7-rc2-v1-1-7b9cd6a7b7f4@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm: kmem: drop __GFP_NOFAIL when allocating objcg vectors

commit 24948e3b7b12e0031a6edb4f49bbb9fb2ad1e4e9 upstream.

Objcg vectors attached to slab pages to store slab object ownership
information are allocated using gfp flags for the original slab
allocation.  Depending on slab page order and the size of slab objects,
objcg vector can take several pages.

If the original allocation was done with the __GFP_NOFAIL flag, it
triggered a warning in the page allocation code.  Indeed, order > 1 pages
should not been allocated with the __GFP_NOFAIL flag.

Fix this by simply dropping the __GFP_NOFAIL flag when allocating the
objcg vector.  It effectively allows to skip the accounting of a single
slab object under a heavy memory pressure.

An alternative would be to implement the mechanism to fallback to order-0
allocations for accounting metadata, which is also not perfect because it
will increase performance penalty and memory footprint of the kernel
memory accounting under memory pressure.

Link: https://lkml.kernel.org/r/ZUp8ZFGxwmCx4ZFr@P9FQF9L96D.corp.robot.car
Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev>
Reported-by: Christoph Lameter <cl@linux.com>
Closes: https://lkml.kernel.org/r/6b42243e-f197-600a-5d22-56bd728a5ad8@gentwo.org
Acked-by: Shakeel Butt <shakeelb@google.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm: fix for negative counter: nr_file_hugepages

commit a48d5bdc877b85201e42cef9c2fdf5378164c23a upstream.

While qualifiying the 6.4 release, the following warning was detected in
messages:

vmstat_refresh: nr_file_hugepages -15664

The warning is caused by the incorrect updating of the NR_FILE_THPS
counter in the function split_huge_page_to_list.  The if case is checking
for folio_test_swapbacked, but the else case is missing the check for
folio_test_pmd_mappable.  The other functions that manipulate the counter
like __filemap_add_folio and filemap_unaccount_folio have the
corresponding check.

I have a test case, which reproduces the problem. It can be found here:
  https://github.com/sroeschus/testcase/blob/main/vmstat_refresh/madv.c

The test case reproduces on an XFS filesystem. Running the same test
case on a BTRFS filesystem does not reproduce the problem.

AFAIK version 6.1 until 6.6 are affected by this problem.

[akpm@linux-foundation.org: whitespace fix]
[shr@devkernel.io: test for folio_test_pmd_mappable()]
Link: https://lkml.kernel.org/r/20231108171517.2436103-1-shr@devkernel.io
Link: https://lkml.kernel.org/r/20231106181918.1091043-1-shr@devkernel.io
Signed-off-by: Stefan Roesch <shr@devkernel.io>
Co-debugged-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: sdhci-pci-gli: A workaround to allow GL9750 to enter ASPM L1.2

commit d7133797e9e1b72fd89237f68cb36d745599ed86 upstream.

When GL9750 enters ASPM L1 sub-states, it will stay at L1.1 and will not
enter L1.2. The workaround is to toggle PM state to allow GL9750 to enter
ASPM L1.2.

Signed-off-by: Victor Shih <victor.shih@genesyslogic.com.tw>
Link: https://lore.kernel.org/r/20230912091710.7797-1-victorshihgli@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

riscv: kprobes: allow writing to x0

commit 8cb22bec142624d21bc85ff96b7bad10b6220e6a upstream.

Instructions can write to x0, so we should simulate these instructions
normally.

Currently, the kernel hangs if an instruction who writes to x0 is
simulated.

Fixes: c22b0bcb1dd0 ("riscv: Add kprobes supported")
Cc: stable@vger.kernel.org
Signed-off-by: Nam Cao <namcaov@gmail.com>
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Acked-by: Guo Ren <guoren@kernel.org>
Link: https://lore.kernel.org/r/20230829182500.61875-1-namcaov@gmail.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

riscv: correct pt_level name via pgtable_l5/4_enabled

commit e59e5e2754bf983fc58ad18f99b5eec01f1a0745 upstream.

The pt_level uses CONFIG_PGTABLE_LEVELS to display page table names.
But if page mode is downgraded from kernel cmdline or restricted by
the hardware in 64BIT, it will give a wrong name.

Like, using no4lvl for sv39, ptdump named the 1G-mapping as "PUD"
that should be "PGD":

0xffffffd840000000-0xffffffd900000000    0x00000000c0000000         3G PUD     D A G . . W R V

So select "P4D/PUD" or "PGD" via pgtable_l5/4_enabled to correct it.

Fixes: e8a62cc26ddf ("riscv: Implement sv48 support")
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Song Shuai <suagrfillet@gmail.com>
Link: https://lore.kernel.org/r/20230712115740.943324-1-suagrfillet@gmail.com
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230830044129.11481-3-palmer@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

riscv: mm: Update the comment of CONFIG_PAGE_OFFSET

commit 559fe94a449cba5b50a7cffea60474b385598c00 upstream.

Since the commit 011f09d12052 set sv57 as default for CONFIG_64BIT,
the comment of CONFIG_PAGE_OFFSET should be updated too.

Fixes: 011f09d12052 ("riscv: mm: Set sv57 on defaultly")
Signed-off-by: Song Shuai <suagrfillet@gmail.com>
Link: https://lore.kernel.org/r/20230809031023.3575407-1-songshuaishuai@tinylab.org
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

LoongArch: Mark __percpu functions as always inline

commit 71945968d8b128c955204baa33ec03bdd91bdc26 upstream.

A recent change to the optimization pipeline in LLVM reveals some
fragility around the inlining of LoongArch's __percpu functions, which
manifests as a BUILD_BUG() failure:

  In file included from kernel/sched/build_policy.c:17:
  In file included from include/linux/sched/cputime.h:5:
  In file included from include/linux/sched/signal.h:5:
  In file included from include/linux/rculist.h:11:
  In file included from include/linux/rcupdate.h:26:
  In file included from include/linux/irqflags.h:18:
  arch/loongarch/include/asm/percpu.h:97:3: error: call to '__compiletime_assert_51' declared with 'error' attribute: BUILD_BUG failed
     97 |                 BUILD_BUG();
        |                 ^
  include/linux/build_bug.h:59:21: note: expanded from macro 'BUILD_BUG'
     59 | #define BUILD_BUG() BUILD_BUG_ON_MSG(1, "BUILD_BUG failed")
        |                     ^
  include/linux/build_bug.h:39:37: note: expanded from macro 'BUILD_BUG_ON_MSG'
     39 | #define BUILD_BUG_ON_MSG(cond, msg) compiletime_assert(!(cond), msg)
        |                                     ^
  include/linux/compiler_types.h:425:2: note: expanded from macro 'compiletime_assert'
    425 |         _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
        |         ^
  include/linux/compiler_types.h:413:2: note: expanded from macro '_compiletime_assert'
    413 |         __compiletime_assert(condition, msg, prefix, suffix)
        |         ^
  include/linux/compiler_types.h:406:4: note: expanded from macro '__compiletime_assert'
    406 |                         prefix ## suffix();                             \
        |                         ^
  <scratch space>:86:1: note: expanded from here
     86 | __compiletime_assert_51
        | ^
  1 error generated.

If these functions are not inlined (which the compiler is free to do
even with functions marked with the standard 'inline' keyword), the
BUILD_BUG() in the default case cannot be eliminated since the compiler
cannot prove it is never used, resulting in a build failure due to the
error attribute.

Mark these functions as __always_inline to guarantee inlining so that
the BUILD_BUG() only triggers when the default case genuinely cannot be
eliminated due to an unexpected size.

Cc: <stable@vger.kernel.org>
Closes: https://github.com/ClangBuiltLinux/linux/issues/1955
Fixes: 46859ac8af52 ("LoongArch: Add multi-processor (SMP) support")
Link: https://github.com/llvm/llvm-project/commit/1a2e77cf9e11dbf56b5720c607313a566eebb16e
Suggested-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nfsd: fix file memleak on client_opens_release

commit bc1b5acb40201a0746d68a7d7cfc141899937f4f upstream.

seq_release should be called to free the allocated seq_file

Cc: stable@vger.kernel.org # v5.3+
Signed-off-by: Mahmoud Adam <mngyadam@amazon.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Fixes: 78599c42ae3c ("nfsd4: add file to display list of client's opens")
Reviewed-by: NeilBrown <neilb@suse.de>
Tested-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm-verity: don't use blocking calls from tasklets

commit 28f07f2ab4b3a2714f1fefcc58ada4bcc195f806 upstream.

The commit 5721d4e5a9cd enhanced dm-verity, so that it can verify blocks
from tasklets rather than from workqueues. This reportedly improves
performance significantly.

However, dm-verity was using the flag CRYPTO_TFM_REQ_MAY_SLEEP from
tasklets which resulted in warnings about sleeping function being called
from non-sleeping context.

BUG: sleeping function called from invalid context at crypto/internal.h:206
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 14, name: ksoftirqd/0
preempt_count: 100, expected: 0
RCU nest depth: 0, expected: 0
CPU: 0 PID: 14 Comm: ksoftirqd/0 Tainted: G        W 6.7.0-rc1 #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014
Call Trace:
 <TASK>
 dump_stack_lvl+0x32/0x50
 __might_resched+0x110/0x160
 crypto_hash_walk_done+0x54/0xb0
 shash_ahash_update+0x51/0x60
 verity_hash_update.isra.0+0x4a/0x130 [dm_verity]
 verity_verify_io+0x165/0x550 [dm_verity]
 ? free_unref_page+0xdf/0x170
 ? psi_group_change+0x113/0x390
 verity_tasklet+0xd/0x70 [dm_verity]
 tasklet_action_common.isra.0+0xb3/0xc0
 __do_softirq+0xaf/0x1ec
 ? smpboot_thread_fn+0x1d/0x200
 ? sort_range+0x20/0x20
 run_ksoftirqd+0x15/0x30
 smpboot_thread_fn+0xed/0x200
 kthread+0xdc/0x110
 ? kthread_complete_and_exit+0x20/0x20
 ret_from_fork+0x28/0x40
 ? kthread_complete_and_exit+0x20/0x20
 ret_from_fork_asm+0x11/0x20
 </TASK>

This commit fixes dm-verity so that it doesn't use the flags
CRYPTO_TFM_REQ_MAY_SLEEP and CRYPTO_TFM_REQ_MAY_BACKLOG from tasklets. The
crypto API would do GFP_ATOMIC allocation instead, it could return -ENOMEM
and we catch -ENOMEM in verity_tasklet and requeue the request to the
workqueue.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org # v6.0+
Fixes: 5721d4e5a9cd ("dm verity: Add optional "try_verify_in_tasklet" feature")
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/mediatek/dp: fix memory leak on ->get_edid callback error path

commit fcaf9761fd5884a64eaac48536f8c27ecfd2e6bc upstream.

Setting new_edid to NULL leaks the buffer.

Fixes: f70ac097a2cf ("drm/mediatek: Add MT8195 Embedded DisplayPort driver")
Cc: Markus Schneider-Pargmann <msp@baylibre.com>
Cc: Guillaume Ranquet <granquet@baylibre.com>
Cc: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Cc: CK Hu <ck.hu@mediatek.com>
Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Cc: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Cc: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-mediatek@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: <stable@vger.kernel.org> # v6.1+
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Guillaume Ranquet <granquet@baylibre.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20230914131058.2472260-1-jani.nikula@intel.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/mediatek/dp: fix memory leak on ->get_edid callback audio detection

commit dab12fa8d2bd3868cf2de485ed15a3feef28a13d upstream.

The sads returned by drm_edid_to_sad() needs to be freed.

Fixes: e71a8ebbe086 ("drm/mediatek: dp: Audio support for MT8195")
Cc: Guillaume Ranquet <granquet@baylibre.com>
Cc: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Cc: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Cc: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-mediatek@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: <stable@vger.kernel.org> # v6.1+
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20230914155317.2511876-1-jani.nikula@intel.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>