build.py: Add support for log and run filename changes

The format of the log file and run file are now selectable
using BB_LOGFMT and BB_RUNFMT, respectively.

The following values may be used:

{task} - task name
{taskfunc} - task.func or func, if task==func
{func} - function name, only available in BB_RUNFMT
{pid} - pid

The log/run files may be placed into a subdirectory that
is relative to T.

Default BB_LOGFMT is: log.{task}.{pid}
Default BB_RUNFMT is: run.{func}.{pid}

(Bitbake rev: 588da606eb81c52cb92d29041e1c67897427bfdf)

Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

build.py: Add additional debug messages

We now add a debug message when entering and exiting a python or
shell function.  This makes it easier to inspect a log and figure
out the run order from the logs.

(Bitbake rev: a0f554d0e722b6705844c6031fdcafa5d1a1c8a7)

Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

build.py: Cleanup exec_func_shell

exec_func_python and exec_func_shell are similar, but variable
usage has diverged sync the two up.  Since exec_func_python is first
use that as the guide for the later exec_func_shell variable naming.

(Bitbake rev: ccfe1a3a2419172799957676107f240badf3f062)

Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

build.py: Add a log to capture task execution order

The new log.task_order contains an ordered list of the tasks as they
were executed in any given recipe.  The format of the lines is
<task> <pid>: <log file>

(Bitbake rev: 8662b43dcbd6e38a5b2ab9d6529af1fb08c146bf)

Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

replace os.popen with subprocess.Popen

Replace os.popen with subprocess.Popen since the older function would
fail (more or less) silently if the executed program cannot be found

There is a bb.process.run() which will invoke the Popen to run command,
use it for simplify the code.

For the:
p4file = os.popen("%s%s files %s" % (p4cmd, p4opt, depot))
...
for file in p4file:
    list = file.split()

in bitbake/lib/bb/fetch2/perforce.py, it should be an error in the past,
since it didn't use readline() to read the pipe, but directly used the
split() for the pipe. Use the bb.process.run would fix the problem since
bb.process.run will return strings.

More info:
http://docs.python.org/library/subprocess.html#subprocess-replacements

[YOCTO #2075]

(Bitbake rev: 8d6700255a6d4dda403c89b171a6d4a1883e5aae)

Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

replace os.system with subprocess.call

Replace os.system with subprocess.call since the older function would
fail (more or less) silently if the executed program cannot be found

More info:
http://docs.python.org/library/subprocess.html#subprocess-replacements

[YOCTO #2075]

(Bitbake rev: f5b3bf115dc1ffbfb241a49cec0fc3654cb71021)

Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

bitbake: support $BITBAKE_UI environment

Patch adds support for a $BITBAKE_UI environment variable which allows
to configure the preferred user interface. Although an '-u' option
(which will override the environment variable) exists already, it was
required to specify this option on every invocation of bitbake.

Because user interface is instanciated very early in the program it is
not possible to use bitbake.conf for setting up a default.  An
environment variable (which acts in a similar category like $PAGER or
$EDITOR) is a simple way for configuring the default.

(Bitbake rev: e3c213015953d1a0afb5ef4be59e1264990e5cee)

Signed-off-by: Enrico Scholz <enrico.scholz@sigma-chemnitz.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

bitbake: implement checksums for local files in SRC_URI

Gathers a list of paths to have checksums calculated at parse time, and
processes these when calculating task hashes. Checksums are cached with
the file's current mtime. Thus, changing any local file in SRC_URI will
now cause the do_fetch taskhash to change, thus forcing a rebuild.

This change adds very roughly about an 8% increase in parse time (a few
seconds) and maybe a few seconds during runqueue generation, so a fairly
moderate performance hit.

Note that since paths are resolved at parse time, this will not force
a rebuild when files are introduced which would cause that resolved path
to be different - for example, where a machine-specific version of a file
was added without otherwise changing the recipe. This will need to be
handled in a future update.

Code to hook this into the signature generator was courtesy of
Richard Purdie <richard.purdie@linuxfoundation.org>.

Implements [YOCTO #2044].

(Bitbake rev: c993b7c457f8b7776e8a5dff253bfa0724bc2cae)

Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

bitbake: refactor out codeparser cache into a separate class

We want to be able to reuse most this functionality for the file
checksum cache.

(Bitbake rev: 0fe3cb1438d297f90dd0fc6b26362ecbff75c76d)

Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

Hob: fixed the issue about the 'run image' page should have the primary bug

issues: when build a image for atom-pc, the output does not include live
image, and 'Save as template' should become the primary action on the screen

[YOCTO 2326]

(Bitbake rev: e9516c7e14d782b943cc6e6a2e5e2111edf03d8c)

Signed-off-by: Liming An <limingx.l.an@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

Hob: fixed the line width of base image description view

As ui design, adjusted the line width for each base image description

[YOCTO 2310]

(Bitbake rev: 8bce98b23bc9cbc4da4464bfbaeb4e1a1aaca5c5)

Signed-off-by: Liming An <limingx.l.an@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

Hob: fixed the issue about bug 'running image' workflow and related view

[YOCTO #2155]

(Bitbake rev: 5e14cb41e8ba26a3114ea2c8b8f83b271bc44b54)

Signed-off-by: Liming An <limingx.l.an@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

Hob: change the build failure scenario as ui design

change the top bar display in build 'issue' page

[YOCTO #2183]

(Bitbake rev: 0705d3db1ce6d0f29301e2428c990ab0d9b2860e)

Signed-off-by: Liming An <limingx.l.an@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

Hob: add '--select a machine--' and '--select a base image--' to GUI

[YOCTO #2175]

(Bitbake rev: 2729729012f035043fedc5098be2ec12b761166d)

Signed-off-by: Liming An <limingx.l.an@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

fetch2: quote/unquote url paths

This ensures we can handle things like %-encoded characters in the path
portion of urls.

(Bitbake rev: b1dbc24ebcc4e5100c32568c2c41fd982fb4bcce)

Signed-off-by: Christopher Larson <kergoth@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

Hob: Get image name internally when updating the image description

The image name shouldn't be passed from outside caller, since the image
name may not in the combobox list. Getting the name from
update_image_desc() internally.

(Bitbake rev: 6635cd7bc2a448d1324e9344100f97613f4272b5)

Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

Hob: Add filter for images listed in image combo

Define BBUI_IMAGE_WHITE_PATTERN variable to indicate which image is
allowed to be displayed in image combobox.

Define BBUI_IMAGE_BLACK_PATTERN variable to indicate which image is NOT
allowed to be displayed in image combobox.

This fixes [YOCTO #1581]

(Bitbake rev: 960461bc12945675af3081eb469f932f4a6eb1cd)

Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

Hob: reimplement the proxy page

This patch is to reimplement the proxy page in the "Advanced Settings" dialog
per the new design in https://bugzilla.yoctoproject.org/attachment.cgi?id=442
and https://bugzilla.yoctoproject.org/attachment.cgi?id=443.

[Yocto #2247]

(Bitbake rev: 911a60c09c1539a3f10c2bcdb26d40e458c31303)

Signed-off-by: Shane Wang <shane.wang@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

fetch2: Also exclude urls containing wildcards from checksumming for now

Without this change, bitbake will try and checksum a wildcard which
will lead to fetch failures.

(Bitbake rev: ac53b88be58b0bed21730c0b61a8fc8e801a2f1b)

Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

tune-mips64.inc: Add new tune file for mips64 big-endian

(From OE-Core rev: e6333825c3482a559a0c0499e17f8f48d3042ddf)

Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

xserver-xorg: Fix build for mips64

mips64 N64 ABI has different size for int and pointer
which means the compiler will complain about conversions
which works fine for 32 bit since sizes are same.

amd64 is taken care of already so we take care of mips64
with this patch by understanding the difference in sizes
in compiler.h

(From OE-Core rev: de21917ba83f104a2d53941f40a9b2b8d35dce49)

Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

site/sh-common: Add missing caches variables to build glib-2.32

This is on the same tone as done for other architectures

(From OE-Core rev: 7bdc3a07d3212d7fc820c77ba509e476cc7aa672)

Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

netbase: Add interface files for qemumips64 and qemush4

These files are alike other qemu machines they
help in creating a working network interface when
using qemumips64 or qemush4

(From OE-Core rev: 1e7406e4f2f93b6b4fa75716c4e901a96206be69)

Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

runqemu: Add qemush4 and qemumips64 knowledge

New machines need to be added and they also
have different kernel commandlines

(From OE-Core rev: 3a5432aec0faea49d2c04984cd169ceb35bba89f)

Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

libc-package: Add sh4 and mips64 to arch options

needed for new architecture support

(From OE-Core rev: 75167eb890d8e4683f1e3852e3b77c67d160bea7)

Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

eglibc-2.15: Support mips64

Add mips64 to binary locale arches
Enabling ports in addons causes wrong
machtype to be chosen for mips64 and
it always chose mips32 which is wrong
for mips64 so enable all the addons
we have and we were enabling them anyway

(From OE-Core rev: da7f9093ad7aa4188cc3d420668b0bda7d950a0f)

Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

kernel-arch.bbclass: Map mips64{el} to mips KARCH

(From OE-Core rev: 22ce249a814f750bc47ead9ce281fcbd63c775c8)

Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

binutils: Default to n64 when configured for mips64

Default ABI for mips64 is n64 so make it default in binutils

(From OE-Core rev: 99f859612e16d636702f9bb11825259d90e468f2)

Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

gcc-4.6, gcc-4.7: Add support for building mips64 cross compiler

Defaults to n64 ABI

(From OE-Core rev: 253f1f3aebd1a90c55efcc6d1f585204e7f3c371)

Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

site: Add mips64 eglibc and uclibc site files

(From OE-Core rev: 2e315d2d0de215811e8caa80b1f13fd0e9fa53e8)

Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

insane.bbclass: Add mips64{el} to known machines

(From OE-Core rev: 77dc886107e1b9cdaf6803141dc97c3ebfc22910)

Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

bb/fetch2/__init__.py: Don't try to compute checksums for directories

In this way we avoid failing the build while trying to fetch local
directories.

[YOCTO #2475]

(Bitbake rev: 39adb5741d9eee0879d3181be505400dffc60804)

Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

hob: update required pygtk to 2.22.0 and gtk+ to 2.20.0

(Bitbake rev: e67ccbbeaecd2d9f3267995c590052c6a3c5b9ce)

Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

lib/bb/ui/crumbs/[package|recipe]selectionpage: include button

The indication of the included packages/recipes in the top right of the
GUI, per design, is a button which switches the Notebook to the included
tab.

(Bitbake rev: 494534cae6211d9055098562df1f35b56858f3ec)

Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

lib/bb/ui/crumbs/imageconfiguration: fix combo boxes drop-down width

The width of the combo boxes drop down should match the combo box
itself.

(Bitbake rev: 93e66f494730d0840dd1d4f3ed924d91e6489995)

Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

lib/bb/ui/crumbs/hobwidget: use light text in HobIndicator

Dark text on a dark background is difficult to read. Further the design
document uses white text.

(Bitbake rev: a84304ccf06a012817a5e6495d53147efcbed960)

Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

lib/bb/ui/crumbs/: replace custom HobNotebook

The custom HobNotebook widget was implemented to address perceived
deficiencies in the gtk.Notebook API.

Recent inspection reveals that the API is capable of all that Hob
requires of it and therefore maintaining a custom class to provide
similar functionality does not make sense.

Addresses [YOCTO #2276]

(Bitbake rev: e683caa9863bbb52480346669806f22173629a5e)

Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

Hob:add function about clicked a row to load image file for 'my images' page

[YOCTO #2238]

(Bitbake rev: b72ee3cf29a5badca3f8c1342356164270615aad)

Signed-off-by: Liming An <limingx.l.an@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

Hob: Apply a line length to consistantly display image descriptions

[YOCTO #2310]

(Bitbake rev: e9d65e06aaf20bd9f5ca02544c1bf976c6bff9be)

Signed-off-by: Liming An <limingx.l.an@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

knotty2: return exit code

'bitbake -u knotty2' never failed which was caused by main() not
propagating the exit code.

(Bitbake rev: 243e4ba405b88fd466bec7b4aa042d20aa6121ff)

Signed-off-by: Enrico Scholz <enrico.scholz@sigma-chemnitz.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

bitbake/fetch: Spell out which fetcher backends support and recommend checksums

There were some hardcoded behaviours in the system for which backends
support checksums verses which backends recommend them verses which
don't recommend them.

This moves the functionality into specific fetchers and then makes the
general code generic. This cleans up the codebase and fixes some corner
cases such as trying to checksum directories returned by the git fetcher.

(Bitbake rev: ef6d268f7b8527541a7fb044cf95a973be4097f4)

Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

bitbake/fetch: If checksums are available, check them for any file, local or remote

Currently, checksums are only checked for remote files. This changes
the check to apply to any file we have checksum data for. A mismatch
against a file is fatal but in the local case, no warnings are shown
about missing checksums.

(Bitbake rev: 80411b3acf2173a4a7d415102d16676eb98363e3)

Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

bitbake/fetch2: Improve visibility of checksum warnings when fetching from mirrors

When fetching from mirrors, checksum errors would get buried in the
logs. This raises their profile so a warning is logged on the console
when fetcher checksum issues are encountered, even if other attempts
are made to get the file (which may or may not have the same issue).

(Bitbake rev: d43fafd7f01b5534499b45213197d8ccececdbc4)

Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

bitbake/fetch2: Improve stamp creation in mirror code

Under certain contitions such as local file:// mirrors of all files,
bitbake might not check checksums. This is not desirable and we should
always check the checksum where possible.

This only exception to this is the git mirror tarball case where the
checksum is unknown but we need to create the .done stamp for other
reasons. This patch preserves thta functionality but in a more specific
section of code where this doesn't interfere in normal checksums.

(Bitbake rev: 2592a43e422c06a6f6174ada562e9c8ba25e1ec1)

Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

bitbake/fetch2: Remove hardcoded file removal and use clean method

Under certain circumstances, bitbake could remove files which were
outside its control since it unconditionally removes ud.localpath.
In the file:// case this can point at external paths.

This patch converts it to use the clean() method which will remove
files when its safe to do so but not in the file:// case since the
file:// handler has an empty clean method. This means bitbake no
longer removes files outside its control and is generally much safer.

(Bitbake rev: 9ad1cebe2220b41da2141cdb3f0a403abb46d77c)

Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

sstate.bbclass: Make sure we don't have an empty fixmepath file

Jason Wessel noticed that a package without any fixmepath entries would
generate a sed warning about no input files.  This patch resolves that
by ensuring that an empty fixmepath file never gets written into the
sstate archive.  Also we avoid a second message by only doing xargs if
we got input.

(From OE-Core rev: 326563d5a897ae2dba7cfd8d73579d3d979d72c8)

Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

xserver-kdrive: Fix X server on PowerPC when built with GCC 4.7.x

Newer versions of GCC uncovered illegal code practice which can cause
runtime failures in the Xext/xace.c code.  This problem has been fixed upstream:
  http://cgit.freedesktop.org/xorg/xserver/patch/Xext/xace.c?id=6dae7f3792611aace1df0cca63bf50c50d93de43
  Subject: xace: Invalid reference to out-of-scope data.

Incorporate this patch into the recipe, with a PR bump.

(From OE-Core rev: 7d1bb144404de650c6e83dfd095d16a796cbcf46)

Signed-off-by: Gary Thomas <gary@mlbassoc.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

linux-yocto: policy cleanups

Updating the meta SRCREVs to pickup configuration policy cleanups:

  49f931b meta/fishriver: remove redundant features and options
  51a6d3f meta/emenlow: remove redundant features and options
  101dd7f meta/crownbay: remove redundant features and options
  4110ecd meta/sugarbay: remove redundant features and options
  0f1304a meta/jasperforest: remove redundant features and options
  0a56a3b meta/common-pc-64: factor out SCSI CDROM option
  b71938a meta/common-pc-64: use usb-mass-storage feature
  0724f40 meta: add scsi cdrom feature
  438bca8 meta/common-pc: use usb-mass-storage feature
  c970881 meta: factor out SCSI options from the usb-mass-storage feature
  4c8135e meta: add scsi disk feature
  6872a81 meta: add scsi feature
  e706ec5 meta/sugarbay: factor out policy-related options
  8b7fbc2 meta/jasperforest: factor out policy-related options
  fea1b0e meta/fishriver: factor out policy-related options
  13bf9ab meta/emenlow: factor out policy-related options
  4748d50 meta/crownbay: factor out policy-related options
  44f592f meta/common-pc-64: factor out policy-related options
  5a3f5c7 meta/common-pc: factor out policy-related options
  1f5a10b meta/common-pc-64: use usb features
  4b87723 meta/common-pc: use usb features
  594ba05 meta: add ROOT_HUB_TT config option to the usb/ehci-hcd feature

(From OE-Core rev: b8ce5b4a8f6ea5021e284dfd486593dbcfbe0502)

Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

kern-tools: update LICENSE field to GPLv2

The LICENSE field for kern-tools was generic and leads to QA warnings
from the license classs:

  "No generic license file exists for: GPL in any provider"

Updating to a specific GPL version that matches the source fixes the
warning.

(From OE-Core rev: 72101b324062642474d67ee90356489993a973d0)

Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

linux-yocto: intel BSP config changes

Updating the meta SRCREV for the following fixes:

   1dfd60f meta/fishriver: move smp options from recipe-space
   012780a meta/emenlow: move smp options from recipe-space
   b59b1a5 meta/crownbay: move smp options from recipe-space
   74dc6ac meta/sugarbay: remove boot-live options
   a4bedcb meta/jasperforest: remove boot-live options
   4ae7b81 meta/sugarbay: use usb features
   30e7e8c meta/jasperforest: use usb features
   22d0c5d meta/fishriver: use usb features
   e262965 meta/emenlow: use usb features

(From OE-Core rev: 5bf86f42e25489ebe92d2c891ee7ee340d668e29)

Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

test-reexec: Add script to address issues when task re-execution

The script is used to address build issues when tasks of different
recipes are re-executed. The script goes through all available recipes
and their tasks. The test results are saved in ./reexeclogs. Force build
logs are saved with prefix "force". Build failure logs are saved with
prefix "failed".

[YOCTO #2123]

(From OE-Core rev: 6258a11f22103d68d02e329c2e7fb198202cc6ef)

Signed-off-by: Jiajun Xu <jiajun.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

multilib.bbclass: Added multilib specific package QA.

Added a new PACKAGEFUNCS function to check the multilib packages'
dependency.

(From OE-Core rev: f193729cdf0f3eccf96a8ce7bf5f599eca89a0d0)

Signed-off-by: Lianhao Lu <lianhao.lu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

multilib.conf: Added multilib support for kmod.

(From OE-Core rev: 41ec6c1eb6998de6c1fd332510c1d71ba58f1b2c)

Signed-off-by: Lianhao Lu <lianhao.lu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

(libc-)package.bbclass: Added MLPREFIX to locale packages.

Added multilib prefix to the locale related package names/dependencies.

(From OE-Core rev: a52f7cf2cc90d918e3250c410995dcc1f3bfd5ee)

Signed-off-by: Lianhao Lu <lianhao.lu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

Revert "kmod: Use base_libdir for installing libkmod"

The commit breaks pkgconfig and after discussing it with the kmod and udev maintainers the conclusion was reached that putting the libraries in /lib instead of /usr/lib is not supported.

This reverts commit 6b74f2461735272bd950a4f060dab6e778a36f92.

(From OE-Core rev: 7163ebd92a799b8f000b2b6f303b20de468b5f90)

Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

xserver-xorg-lite: disable xmlto like full xserver-xorg does

* xmlto-native is unusable (see YOCTO #2416
  xmlto/xsltproc stylesheets cannot be found even when they are installed in sysroot)

* fails like this:
| make[2]: Entering directory `/OE/shr-core/tmp-eglibc/work/armv5te-oe-linux-gnueabi/xserver-xorg-lite/xserver-xorg-lite-2_1.11.2-r2/xorg-server-1.11.2/doc'
| /OE/shr-core/tmp-eglibc/sysroots/x86_64-linux/usr/bin/xmlto   xhtml-nochunks Xserver-spec.xml
| /OE/shr-core/tmp-eglibc/sysroots/x86_64-linux/usr/bin/xmlto   xhtml-nochunks Xinput.xml
| xmlto: /OE/shr-core/tmp-eglibc/work/armv5te-oe-linux-gnueabi/xserver-xorg-lite/xserver-xorg-lite-2_1.11.2-r2/xorg-server-1.11.2/doc/Xinput.xml does not validate (status 3)
| xmlto: Fix document syntax or use --skip-validation option
| /OE/shr-core/tmp-eglibc/work/armv5te-oe-linux-gnueabi/xserver-xorg-lite/xserver-xorg-lite-2_1.11.2-r2/xorg-server-1.11.2/doc/Xinput.xml:3: warning: failed to load external entity "http://www.oasis-open.org/docbook/xml/4.3/docbookx.dtd"
|                    "http://www.oasis-open.org/docbook/xml/4.3/docbookx.dtd">
|                                                                             ^
| /OE/shr-core/tmp-eglibc/work/armv5te-oe-linux-gnueabi/xserver-xorg-lite/xserver-xorg-lite-2_1.11.2-r2/xorg-server-1.11.2/doc/Xinput.xml:40: parser error : Entity 'ldquo' not defined
| btaining a copy of this software and associated documentation files (the &ldquo;
|                                                                                ^
| /OE/shr-core/tmp-eglibc/work/armv5te-oe-linux-gnueabi/xserver-xorg-lite/xserver-xorg-lite-2_1.11.2-r2/xorg-server-1.11.2/doc/Xinput.xml:40: parser error : Entity 'rdquo' not defined
|  of this software and associated documentation files (the &ldquo;Software&rdquo;
|                                                                                ^
| /OE/shr-core/tmp-eglibc/work/armv5te-oe-linux-gnueabi/xserver-xorg-lite/xserver-xorg-lite-2_1.11.2-r2/xorg-server-1.11.2/doc/Xinput.xml:42: parser error : Entity 'ldquo' not defined
| btaining a copy of this software and associated documentation files (the &ldquo;
|                                                                                ^
| /OE/shr-core/tmp-eglibc/work/armv5te-oe-linux-gnueabi/xserver-xorg-lite/xserver-xorg-lite-2_1.11.2-r2/xorg-server-1.11.2/doc/Xinput.xml:42: parser error : Entity 'rdquo' not defined
|  of this software and associated documentation files (the &ldquo;Software&rdquo;
|                                                                                ^
| warning: failed to load external entity "http://www.oasis-open.org/docbook/xml/4.3/docbookx.dtd"
| validity error : Could not load the external subset "http://www.oasis-open.org/docbook/xml/4.3/docbookx.dtd"
| Document /OE/shr-core/tmp-eglibc/work/armv5te-oe-linux-gnueabi/xserver-xorg-lite/xserver-xorg-lite-2_1.11.2-r2/xorg-server-1.11.2/doc/Xinput.xml does not validate
| xmlto: /OE/shr-core/tmp-eglibc/work/armv5te-oe-linux-gnueabi/xserver-xorg-lite/xserver-xorg-lite-2_1.11.2-r2/xorg-server-1.11.2/doc/Xserver-spec.xml does not validate (status 3)
| xmlto: Fix document syntax or use --skip-validation option
| make[2]: *** [Xinput.html] Error 13
| make[2]: *** Waiting for unfinished jobs....
| /OE/shr-core/tmp-eglibc/work/armv5te-oe-linux-gnueabi/xserver-xorg-lite/xserver-xorg-lite-2_1.11.2-r2/xorg-server-1.11.2/doc/Xserver-spec.xml:4: warning: failed to load external entity "/xserver/doc/xml/xserver.ent"
|  <!ENTITY % defs SYSTEM "/xserver/doc/xml/xserver.ent"> %defs;
|                                                               ^
| Entity: line 1:
|  %defs;
|        ^

(From OE-Core rev: e8c61491cdd28caa51b567c6ce40155504f9eadb)

Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

sanity.bbclass: check user can read and write to SSTATE_DIR

The user needs read and write permissions to SSTATE_DIR, check
whether they have sufficient permissions and if not recommend
use of SSTATE_MIRRORS.

(From OE-Core rev: 0c0c4efbf92bcf0f8942f17c18525a4b4ed1798c)

Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

xf86-video-vmware: update package to 12.0.2

This patch updates the package version for the vmware xorg driver
to 12.0.2, following upstream. No other changes made beside updating
the checksums.

Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

gnupg: Update to upstream version 2.0.19

(From OE-Core rev: ab3d5b40aadfe23282d35ebe3b777e3cc28583f7)

Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

gnutls: update to 2.12.19

Tested with curl in qemux86/core-image-lsb.

(From OE-Core rev: 041e4ef362921db606840c6de936a89975c818be)

Signed-off-by: Bogdan Marinescu <bogdan.a.marinescu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

archiver.bbclass: Add two default set for avoiding error when missing assignment

Add two default set(SOURCE_ARCHIVE_LOG_WITH_SCRIPTS, \
SOURCE_ARCHIVE_PACKAGE_TYPE) to archiver.bbclass for avoiding \
building error when forgetting to assign to them.

(From OE-Core rev: 5bda8f33b6763fb519543d0f9e35c970a31d39b8)

Signed-off-by: Xiaofeng Yan <xiaofeng.yan@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

meta/classes/sstate.bbclass: ensure sstate files have group R/W

In order to make sharing sstate files easier chmod them with 0664 permissions so that they are readable and writable by the user and any other members of  their group.

(From OE-Core rev: dae9ad8a0ba0343e3083694cdcb20f0d02927ad0)

Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

kernel.bbclass: add deploy link to KERNEL_IMAGETYPE

It's common to provide a non-machine-suffixed link in DEPLOY_DIR_IMAGE, so
let's be consistent and do so here as well.

(From OE-Core rev: c1c8d2f3cffc540380c0a5fcdda48d64cbec333a)

Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

oe.types: give the regex type more sane semantics

Currently, if a variable is unset or has an empty value, the regex type
will return a match object which always matches. Not all variable types
will necessarily have the same behavior for handling defaults. I believe
that returning a match object which matches nothing when a variable is
unset is superior to returning one which matches anything, and the user
can always explicitly request anything via '.*', if that's what they
want.

This constructs a null pattern object which will never match, and uses
it when encountering an unset or empty variable (currently, these two
things are one and the same, as maketype is handling the default. we may
well want to shift that logic into the individual types, giving them
more control over default behavior, but currently the behavior is at
least relatively consistent -- no difference between unset and empty
variables).

(From OE-Core rev: dc7e4a79d9a1884b4c5705ef3173613958204b50)

Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

csl-versions: fix bb.process.CmdError reference

(From OE-Core rev: 3c18344e8a6a4a0b7aad1d1322d02ab8accc9db1)

Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

xinetd: Update to 2.3.15

(From OE-Core rev: 17d7f2a9ee4c56bc697f05a8e703ddb02c262d99)

Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

fotowall: Add #include ui_wizard.h to ExportWizard.cpp

App/ExportWizard.cpp depends on wizard.h which depends on ui_wizard. The last one
should be already generated before compiling ExportWizard.cpp.

[YOCTO #2297]

(From OE-Core rev: 2cf6e7cf81c0b864b5d51be60094a6eb3e584383)

Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

expat: update to upstream version 2.1.0

(From OE-Core rev: 445f2721f92bae4a9ae86e13f14775e924dc7f84)

Signed-off-by: Marko Lindqvist <cazfi74@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

classes/mirrors.bbclass: Point snapshot.debian.org mirror to working location

If you point to snapshot.debian.net/archive/pool then it will fetch
you a html page which will end up in corrupt download. The locations
have changed for archives and here we point the mirror to right
location.

(From OE-Core rev: 15e8aa4cd773022b36a66f70e4f6436289f3d1bc)

Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

gdk-pixbuf: Fix lsb builds where dependency may be missing

We turn on the xlib depdendency for linuxstdbase builds but
were missing the dependency on libx11. This adds the missing
dependency.

(From OE-Core rev: 89c3eb5247d9d15f0beaf397d2aa5332007f229a)

Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

tcmode-external-csl.inc: specify the path you couldn't find

While misconfiguring toolchains, I noticed that one of the
diagnostic messages gave me a little less information than I'd
like about what I'd done wrong.  Displaying the glob pattern
that couldn't be matched turns out to make it a lot easier to
figure out what you did wrong.  (Answer: Not enough coffee.)

(From OE-Core rev: 84d8b8846556cee191afb93016a2c38df8aaa7ba)

Signed-off-by: Peter Seebach <peter.seebach@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

tcmode-external-csl.inc: Allow for overrides

Wind River uses binary toolchains provided by Code Sourcery, but which
have different values for a couple of the preset variables than the
generic toolchains the external-csl toolchain feature supports.  If
these values were ?= assignments, we could just assign values to them
and share the code, rather than keeping modified copies.

(From OE-Core rev: f3c50743917974f0eeab6d9eefc2e7b572a8a787)

Signed-off-by: Peter Seebach <peter.seebach@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

sstate.bbclass: Optimize the generation and install path fixups

The fixmepath file that is generated contains a list of all of the files
that need their paths fixed.  In the previous version the fixmepath was
generated to include all of the files that sed may have changed.  In the
new version, we first grep the files to see if they contain a path that
needs to be changed, only then do we perform the sed operation on those files.

This results in a modest performance increate in the creation of the sstate
file.  The following numbers include the do_package and do_populate_sysroot
tasks on the perl recipe.

Before the change:
real    4m23.018s
user    1m57.067s
sys     1m33.327s

After the change:
real    4m13.083s
user    1m54.062s
sys     1m26.064s

However, a more significnt performance gain is felt during the
extraction/install of sstate cache files, as the fixmepaths file now has a
significantly smaller list of files to modify.

Before the change:
real    0m39.798s
user    0m11.158s
sys     0m12.642s

After the change:
real    0m25.511s
user    0m8.408s
sys     0m5.077s

(All numbers above were recorded with a cold filesystem cache on a machine
with 12 GB of ram.)

(From OE-Core rev: 46067264bedeff8248a2b2441733420fe6651f84)

Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

bitbake.conf: Add CCACHE_DIR to BB_HASHBASE_WHITELIST

The location of the ccache should not affect the sum in the sstate
files.

The end user should be free to use an external ccache via defining
CCACHE_DIR to a new value in local.conf or using the default per
package local ccache in the temp directory.

(From OE-Core rev: 8d49d92fc2e581820e410c6a4dceb30911d949e0)

Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

tcmode-external-csl: handle TUNE_PKGARCH=core2

(From OE-Core rev: 01dea384924293d0f99723073277bf6b1f4c7976)

Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

tcmode-external-csl: avoid hardcoding a list of ia32 archs

(From OE-Core rev: 166a3f79d2538f40fb150c90b0f8e28987db8daa)

Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

tcmode-external-csl: drop unnecessary cppflags/ldflags

(From OE-Core rev: fdbc2290cb4b786cb0135daa500be5072e270cd0)

Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

gdk-pixbuf: Allow empty -xlib package

There are things that depend on the -xlib package. There are two
possible ways to fix this, either recommend them instead of depending
on them, or allow the package to be empty. I'm doing the latter
since its a bit cleaner and less invasive.

This library is a bit pointless which is why there is little point
in adding the x dependency in the non-lsb case. If it becomes widly
used we can rethink this.

(From OE-Core rev: 7d49da7389b5bb0e74d9000b002ebf0bc554e85b)

Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

runqemu: replace bashism with working shell idiom

The =~ operator is not one of my favorites, not just due to portability
issues, but because it's not well known, and a lot of people might
not expect a regex operator.

The canonical shell idiom for this is to use case with alternation
and wildcards.  As a side note, if you are matching anything containing
core-image-sato, you don't need to also check for core-image-sato-sdk.

(From OE-Core rev: 716ae8dbd1fb29292c9fca0f59d3807a54508e87)

Signed-off-by: Peter Seebach <peter.seebach@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

ofono: Add python-pygobject to ofono-tests package DEPENDS

Some of the ofono-tests python scripts, such as test-modem and
receive-sms (22 in total) import gobject. Make the ofono-tests package
depend on python-pygobject.

Tested on the meta-intel fri2 BSP in a core-image-sato image. Assorted
ofono tests run correctly.

(From OE-Core rev: 30708f1b5bc3844e080ef863fdd22446700ba0b1)

Signed-off-by: Darren Hart <dvhart@linux.intel.com>
CC: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

classes/rootfs_*: fix splitting package dependency strings

If a + character appears in a version specification within the list of
package dependencies, the version will not be removed from the list in
list_package_depends/recommends leading to garbage appearing in the
dependency graphs generated by buildhistory. To avoid any future
problems due to unusual characters appearing in versions, change the
regex to match almost any character.

Fixes [YOCTO #2451].

(From OE-Core rev: 36d1717e2ad4ca1620ee9f01b524b5ff2f499b26)

Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

lib/bb/siggen.py: ensure dumped signatures have group R/W

We anticipate signatures being shared amongst peers in a group so ensure
they have rw-rw-r-- permissions to facilitate this.

(Bitbake rev: e4716f316152cafabebcefec7b387edeb02ad3eb)

Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

lib/bb/siggen: use open() rather than the file constructor

The Python documentation states:
 "When opening a file, it’s preferable to use open() instead of invoking
the file constructor directly." [1]

Further in Python 3 direct use of the file constructor is no longer
possible.

1. http://docs.python.org/library/functions.html#open

(Bitbake rev: 759f953e29a7131614e5b1f0312edf2b17523675)

Signed-off-by: Joshua Lock <josh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

bitbake/tests: Add test of the git fetcher

(Bitbake rev: 4dd2655caef1003b51c0600397a91f1c9526a67f)

Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

bitbake/fetch2/git: Set a default for the GITDIR variable

(Bitbake rev: 1a0cdc65812f1f12bf4bbea6540a3aaf0f81b4f7)

Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

bitbake/fetch2/git: Don't set the branch name to None, that makes no sense

With floating revisions and no specified branch, the fetcher could fail
with some obtuse errors. This was due to the branch name being set to None
which makes no sense. This patch reworks some conditions to avoid this.

(Bitbake rev: 740c58d43cfb1445dd126e4827bb70ce988ca107)

Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

gdk-pixbuf: Drop unneeded RPROVIDES

(From OE-Core rev: cab85fd0b481cdbf36477348de75352be3f38ca2)

Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

package.bbclass: Drop dubious use of packages[0] from do_split_packages and do_split_locales

As the comment says, using packages[0] is rather broken and can be incorrect,
as demonstrated by the recent gdk-pixbuf change. Replacing it with PN is
a bit more correct and more likely to do what was originally intended
by this function.

(From OE-Core rev: 5d0144fe6bd1febc2d1e651bbcff891c80f20b88)

Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

oe-buildenv-internal: Fix BITBAKEDIR changes to work with existing autobuilder scritpts

The BITBAKEDIR change does not work well when the script is sourced from another script
since $2 may be unrelated. This change adds the logic onto the BDIR conditional and
which more external scripts would set, hence avoiding the problem.

(From OE-Core rev: ec8fbe0d1870285a4a972ddcfe83aa63d720cb80)

Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

xserver-xorg: Fix build on powerpc

(From OE-Core rev: 8a11f42d3ed526fae0c0bb050d7d0519904591b4)

Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

Add option to oe-buildenv-internal script to change bitbake location.

Having bitbake inside the oe-core is annoying to some people. This commit
adds a second option to the oe-init-build-env script.

Run like this:

. ./oe-init-build-env ../build ../bitbake

for example. Without the second option, the old behavior is preserved.

(From OE-Core rev: 45510a0dd7a9321c29c5b21ac4053192f7ab9ad5)

Signed-off-by: Philip Balister <philip@balister.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

kernel-yocto: export GUILT_BASE to devshell

One of the patch backends to linux-yocto is guilt, which normally
tracks patches under .git. But .git isn't something that can be
checked into a SCM and repeated. So it has been moved under meta/patches
and committed to the meta branch.

If devshell is used, GUILT_BASE isn't set, so patch manipulations will
fail. We export GUILT_BASE and point it at the meta directory when
devshell is invoked for linux-yocto.

(From OE-Core rev: 10546e42a0db6a9585488536e29759239ef6e73b)

Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

package.bbclass: Drop EXPORT_FUNCTIONS use against mapping_rename_hook

The usage of this function renaming and it being called using
bb.build.exec_func() causes needless indirection loops, confusing log
files and seems generally pointless.

This simplification makes the process much simpler and faster. I can't
come up with a good reason why the export_functions functionality is
needed for this function.

(From OE-Core rev: 74daad03ca29a03b0005f7d2b90a0347d5b583a5)

Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

.gitignore: add /bitbake to the ignore list for external distributions

External distributions based on the oe-core will typically include
bitbake in the top level directory.  The idea is to make it easy
for external distributions to easily assemble a distribution
with a pristine version of oe-core, add avoid the git untracked messages:

 # Untracked files:
 #   (use "git add <file>..." to include in what will be committed)
 #
 #       bitbake/

[RP: remove leading slash]
(From OE-Core rev: 9cd30beba77497288eeb2545920bc23f2a77cf16)

Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

e2fsprogs: fix packaging error for libext2fs

* libext2fs is located in base_libdir, not libdir

(From OE-Core rev: 683bc278d8695ecf4c8658ab39266279c6bf26d4)

Signed-off-by: Andreas Oberritter <obi@opendreambox.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

sstate.bbclass: Improve sstate_installpkg performance

In a pathological case, lots of files to process, the sstate_installpkg
performance was very poor.  It interated over each file and ran 3
individual sed commands per file.  Changing this to keep iterating
but running only a single command took about 1/3 time time.

However, when looking at the corresponding sstate_hardcode_path
function, it was clear we could optimize this further.

Using the same encoding logic to specify only the minimumal sed
operation necessary, and using xargs to avoid the os.system call the
install step was able to be performed in 13% of the original time.

Example timing numbers for perl:

3m7s original code
1m20s single sed, but interating
0m26s using xargs and limited sed

(From OE-Core rev: d9f655753fbdc8cbd8e705577430fed4f23732b3)

Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

gdk-pixbuf: Add --with-x11 when building lsb image

LSB Test Suite complains "No library libgdk_pixbuf_xlib-2.0.so.0" \
because of having "--without-x11" for gdk-pixbuf_2.24.1.bb.
Use the linuxstdbase override and also make it conditional on x11 \
being in DISTRO_FEATURES for passing lsb test.
Split libgdk_pixbuf_xlib to a single package.

(From OE-Core rev: 4cb21630cf87e6cc9a062f1c2be9fea25d3e218a)

Signed-off-by: Xiaofeng Yan <xiaofeng.yan@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

task-core-lsb: Add libgdk-pixbuf-xlib to core-image-lsb

LSB Test Suite complains "No library libgdk_pixbuf_xlib-2.0.so.0" \
which are created by gdk-pixbuf_2.24.1.bb.
So add this library to core-image-lsb for passing lsb test.

[RP: Fix whitespace]
(From OE-Core rev: e79f19ef4fb59d6dc14ea139d4e4b132add80842)

Signed-off-by: Xiaofeng Yan <xiaofeng.yan@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

eglibc: fix build with poky-tiny distro

This fixes bug [YOCTO #2443]

The prototype of findidx() has changed, but the code in xregex.c is
still using the old prototype. This issue stayed hidden because this
code only gets excercised when OPTION_POSIX_REGEXP_GLIBC is disabled
in the eglibc configuration.
  See the patch for further information.

(From OE-Core rev: 8691038efb0aca4a2cd61fce0c53d10092e48b75)

Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

typecheck.bbclass: update per current variable typing code

(From OE-Core rev: 13fcda4b158ce944d64b22bd5b63ce0f51faad67)

Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>