Wolfgang Denk [Fri, 18 Aug 2006 21:27:33 +0000 (23:27 +0200)]
Minor cleanup
Marian Balakowicz [Fri, 18 Aug 2006 17:14:46 +0000 (19:14 +0200)]
Add support for WTK FO300 board (TQM5200 based).
Wolfgang Denk [Fri, 18 Aug 2006 13:23:10 +0000 (15:23 +0200)]
Merge with /home/raj/git/u-boot
Wolfgang Denk [Fri, 18 Aug 2006 09:38:05 +0000 (11:38 +0200)]
Merge ... git+ssh://fifi/home/wd/git/u-boot/master
Rafal Jaworowski [Fri, 18 Aug 2006 08:39:11 +0000 (10:39 +0200)]
Fix TQM834x hang.
Wolfgang Denk [Thu, 17 Aug 2006 08:48:36 +0000 (10:48 +0200)]
Cleanup debug code for yucca board.
Wolfgang Denk [Wed, 16 Aug 2006 22:50:26 +0000 (00:50 +0200)]
MCC200: restrict addressable flash space to 32 MB
Wolfgang Denk [Wed, 16 Aug 2006 22:36:51 +0000 (00:36 +0200)]
Add debug console on COM12 for MCC200 board
Wolfgang Denk [Mon, 14 Aug 2006 21:23:06 +0000 (23:23 +0200)]
Update for SC520 board.
Patch by David Updegraff, 02 Dec 2005
Wolfgang Denk [Mon, 14 Aug 2006 21:17:47 +0000 (23:17 +0200)]
Fixed common.h spelling error.
Patch by Cory Tusar, 30 Nov 2005
Wolfgang Denk [Mon, 14 Aug 2006 20:43:13 +0000 (22:43 +0200)]
Fix typo.
Patch by Andreas Engel, 28 Nov 2005
Wolfgang Denk [Mon, 14 Aug 2006 20:05:26 +0000 (22:05 +0200)]
Fix fatload command on FAT32 formatted partitions.
Patch by Joachim Jaeger, 18 Nov 2005
Wolfgang Denk [Mon, 14 Aug 2006 19:18:21 +0000 (21:18 +0200)]
Fix drivers/dm9000.c when configured in 32 bit mode.
Patch by Eric Benard, 17 Nov 2005
Wolfgang Denk [Sun, 13 Aug 2006 00:25:32 +0000 (02:25 +0200)]
Merge with /home/sr/git/u-boot/denx
Wolfgang Denk [Fri, 11 Aug 2006 16:19:53 +0000 (18:19 +0200)]
Merge with /home/raj/git/u-boot
Wolfgang Denk [Fri, 11 Aug 2006 15:33:42 +0000 (17:33 +0200)]
Fix preboot message on TQM85xx after switching to hush parser.
Wolfgang Denk [Fri, 11 Aug 2006 15:29:38 +0000 (17:29 +0200)]
Adapt TQM85xx ramdisk address to Linux kernel memory map
Rafal Jaworowski [Fri, 11 Aug 2006 10:35:52 +0000 (12:35 +0200)]
Fix PCI-Express on PPC440SPe rev. A.
Wolfgang Denk [Thu, 10 Aug 2006 13:40:49 +0000 (15:40 +0200)]
Merge with /home/raj/git/u-boot
Rafal Jaworowski [Thu, 10 Aug 2006 10:43:17 +0000 (12:43 +0200)]
Add support for PCI-Express on PPC440SPe (Yucca board).
Wolfgang Denk [Wed, 9 Aug 2006 23:58:22 +0000 (01:58 +0200)]
Fix compiler warning for TRAB board.
Patch by Martin Krause, 07 Aug 2006
Wolfgang Denk [Mon, 7 Aug 2006 18:28:05 +0000 (20:28 +0200)]
Merge with /home/tur/proj/usb_sticks/u-boot
Stefan Roese [Mon, 7 Aug 2006 13:08:44 +0000 (15:08 +0200)]
Fix control-c handing in CONFIG_CMDLINE_EDITING
Properly pass break code back from readline.
Patch by Roger Blofeld, 31 Jul 2006
Stefan Roese [Mon, 7 Aug 2006 12:33:32 +0000 (14:33 +0200)]
Add commandline history support to all AMCC eval boards
Patch by Stefan Roese, 07 Aug 2006
Stefan Roese [Mon, 7 Aug 2006 12:31:21 +0000 (14:31 +0200)]
Add Macronix MXLV320T flash support for AMCC Bamboo
Patch by Stefan Roese, 07 Aug 2006
Stefan Roese [Mon, 7 Aug 2006 12:29:04 +0000 (14:29 +0200)]
Change "mii info" to not print an error upon missing PHY at address
Patch by Stefan Roese, 07 Aug 2006
Bartlomiej Sieka [Thu, 3 Aug 2006 21:20:13 +0000 (23:20 +0200)]
Prevent USB commands from working when USB is stopped.
Bartlomiej Sieka [Tue, 1 Aug 2006 22:54:18 +0000 (00:54 +0200)]
Add rudimentary handling of alternate settings of USB interfaces - to fix
problems with some USB storage devices. Some code readability improvements.
Stefan Roese [Fri, 28 Jul 2006 16:34:58 +0000 (18:34 +0200)]
PPC440 DDR setup: Set SDRAM0_CFG0[PMU]=0 for best performance
AMCC suggested to set the PMU bit to 0 for best performace on
the PPC440 DDR controller.
Please see doc/README.440-DDR-performance for details.
Patch by Stefan Roese, 28 Jul 2006
Wolfgang Denk [Thu, 27 Jul 2006 14:57:34 +0000 (16:57 +0200)]
Merge with /home/sr/git/u-boot/denx
Stefan Roese [Thu, 27 Jul 2006 14:14:05 +0000 (16:14 +0200)]
AMCC bamboo (440EP) U-Boot image reduced to 384kbyte
Please see doc/README.bamboo for details.
Patch by Stefan Roese, 27 Jul 2006
Stefan Roese [Thu, 27 Jul 2006 14:11:19 +0000 (16:11 +0200)]
Fix CONFIG_CMDLINE_EDITING implementation
Patch by Stefan Roese, 27 Jul 2006
Wolfgang Denk [Wed, 26 Jul 2006 08:33:37 +0000 (10:33 +0200)]
Fix preboot message on TQM5200 after switching to hush parser.
Wolfgang Denk [Sun, 23 Jul 2006 20:40:51 +0000 (22:40 +0200)]
MCC200: set default configuration to low_boot DDR,
and support for configurable options high_boot and/or SDRAM.
Wolfgang Denk [Sat, 22 Jul 2006 19:45:49 +0000 (21:45 +0200)]
Add support for 256 MB SDRAM on CPU87
Patch by Josef Wagner, 25 Nov 2005
Wolfgang Denk [Fri, 21 Jul 2006 23:20:03 +0000 (01:20 +0200)]
Add configuration for cam5200 board (based on TQM5200S).
Wolfgang Denk [Fri, 21 Jul 2006 18:57:53 +0000 (20:57 +0200)]
Code cleanup
Wolfgang Denk [Fri, 21 Jul 2006 16:51:56 +0000 (18:51 +0200)]
Code cleanup.
Wolfgang Denk [Fri, 21 Jul 2006 13:24:56 +0000 (15:24 +0200)]
More code cleanup
Wolfgang Denk [Fri, 21 Jul 2006 13:21:40 +0000 (15:21 +0200)]
Disabled kvme080 board in MAKEALL because of build problems.
Wolfgang Denk [Fri, 21 Jul 2006 09:56:05 +0000 (11:56 +0200)]
Code cleanup
Wolfgang Denk [Fri, 21 Jul 2006 09:38:33 +0000 (11:38 +0200)]
Update NetStar board
Patch by Ladislav Michl, 03 Nov 2005
Wolfgang Denk [Fri, 21 Jul 2006 09:37:40 +0000 (11:37 +0200)]
Make code better readable.
Patch by Ladislav Michl, 14 Sep 2005
Wolfgang Denk [Fri, 21 Jul 2006 09:36:48 +0000 (11:36 +0200)]
Enable initrd ATAG for xm250 board.
Patch by Josef Wagner, 05 Sep 2005
Wolfgang Denk [Fri, 21 Jul 2006 09:35:21 +0000 (11:35 +0200)]
Document CONFIG_CMDLINE_EDITING in README.
Wolfgang Denk [Fri, 21 Jul 2006 09:34:34 +0000 (11:34 +0200)]
Minor code cleanup.
Wolfgang Denk [Fri, 21 Jul 2006 09:33:45 +0000 (11:33 +0200)]
Add readline cmdline-editing extension
Patch by JinHua Luo, 01 Sep 2005
Wolfgang Denk [Fri, 21 Jul 2006 09:31:42 +0000 (11:31 +0200)]
Add support for friendly-arm SBC-2410X board
Patch by JinHua Luo, 01 Sep 2005
Wolfgang Denk [Fri, 21 Jul 2006 09:30:18 +0000 (11:30 +0200)]
Fix multi-part image support on i386 platform.
Patch by David Updegraff, 19 Aug 2005
Wolfgang Denk [Fri, 21 Jul 2006 09:29:20 +0000 (11:29 +0200)]
Add support for KVME080 board
Patch by Sangmoon Kim, 18 Aug 2005
Wolfgang Denk [Fri, 21 Jul 2006 09:27:42 +0000 (11:27 +0200)]
Fix patch attribution.
Wolfgang Denk [Fri, 21 Jul 2006 09:24:47 +0000 (11:24 +0200)]
Fix MIPS LE build problem
Patch by Thomas Lange, 10 Aug 2005
Wolfgang Denk [Fri, 21 Jul 2006 09:20:46 +0000 (11:20 +0200)]
Check argument count in "mii" command.
Problem pointed out by Andrew Dyer, 13 Jun 2005
Wolfgang Denk [Fri, 21 Jul 2006 09:16:34 +0000 (11:16 +0200)]
* Cleanup TQM5200 board configurations:
- make highboot configurations use environment at high end, too,
to avoid flash fragmentation
- always use redundand environment
- don't enable video code for modules without graphics controller
- provide useful (though different) mtdparts settings
- get rid of CONFIG_CS_AUTOCONF which was always set anyway
* Extend mkconfig tool to print more useful target name
Wolfgang Denk [Wed, 19 Jul 2006 16:01:38 +0000 (18:01 +0200)]
Add support for high-boot on TQM5200 and TQM5200S boards.
Hint: the CPLD on the TQM5200 must be programmed with a software
version supporting the high boot option! The new TQM5200S is
already supporting this option. On the TQM5200 this option will be
supported in configurations with MPC5200 rev B processors.
To actually "high boot", set jumper X30 on the STK52xx.
Patch by Martin Krause, 12 Jul 2006
Wolfgang Denk [Wed, 19 Jul 2006 15:52:30 +0000 (17:52 +0200)]
Add support for new TQM5200 revisions
- Support for TQM5200S (short version without graphic controller)
- Support for modules with 'N' type S29GL128N Spansion flashes
(requires changes to flash layout)
- Support for MPC5200B cpu (mostly support for second SDRAM bank)
Wolfgang Denk [Wed, 19 Jul 2006 12:49:35 +0000 (14:49 +0200)]
Fix support for PS/2 keyboard on TQM85xx boards
The PS/2 keyobard driver for the TQM85xx modules only supports the
internal DUART of the MPC85xx CPU. Since the MPC8560 doesn't
include a DUART, the TQM8560 modules can't be used with the PS/2
keyboard controller on the STK85xx board.
The PS/2 keyboard driver should work with the modules TQM8540,
TQM8541 and TQM8555, but it only has been tested on a TQM8540, yet.
Make sure the PS/2 controller on the STK85xx is programmed. Jumper
settings: X66 1-2, 9-10; X61 2-3
Patch by Martin Krause, 21 Jun 2006
Wolfgang Denk [Wed, 19 Jul 2006 12:44:03 +0000 (14:44 +0200)]
Adjust RTC century handling on STK52xx board to match Linux driver.
Patch by Martin Krause, 12 Jun 2006
Wolfgang Denk [Wed, 19 Jul 2006 12:40:43 +0000 (14:40 +0200)]
Adjust filenames for USB update images on TRAB board.
During an automatic update via USB stick, U-Boot searches for
images with the name "firmware.img" and "kernel.img". This names
are now changed to "firmw_01.img" and "kernl_01.img". This is done,
to prevent updates of new boards (with the new macronics "c" step
flashes) with old, incompatible firmware or kernel versions.
Patch by Martin Krause, 21 Jun 2006
Wolfgang Denk [Wed, 19 Jul 2006 12:23:12 +0000 (14:23 +0200)]
Bugfix in VFD routine on TRAB board.
Make sure upper lext pixel can be set to blue, too
(so far only red was possible).
Patch by Martin Krause, 15 Feb 2006
Wolfgang Denk [Wed, 19 Jul 2006 12:16:38 +0000 (14:16 +0200)]
Enable buffered flash writes for TB5200 board.
Wolfgang Denk [Wed, 19 Jul 2006 12:13:02 +0000 (14:13 +0200)]
Fix some bugs in TRAB board flash driver.
- increase CFG_FLASH_ERASE_TOUT from 2 to 15 seconds
- use CFG_FLASH_WRITE_TOUT for programming instead of CFG_FLASH_ERASE_TOUT
- remove "Unlock Bypass" mode, because macronix flashes do not support
this mode officially
- fix flash reset command from 0x00FF to 0x00F0. 0x00FF is only specified
for Intel compatible flashes, not for AMD compatible.
Patch by Martin Krause, 15 Feb 2006
Wolfgang Denk [Wed, 19 Jul 2006 12:07:21 +0000 (14:07 +0200)]
Add additional error messages to flash driver on TRAB board
(for erase errors and timeout errors)
Patch by Martin Krause, 14 Feb 2006
Wolfgang Denk [Wed, 19 Jul 2006 11:50:38 +0000 (13:50 +0200)]
Add support for TB5200 board
The TB5200 ("Tinybox") is a small baseboard for the TQM5200 module
integrated in a little aluminium case.
Patch by Martin Krause, 8 Jun 2006
Some code cleanup
Wolfgang Denk [Tue, 18 Jul 2006 15:44:19 +0000 (17:44 +0200)]
Enable buffered flash writes for TQM5200 board.
Wolfgang Denk [Thu, 13 Jul 2006 22:48:06 +0000 (00:48 +0200)]
Merge with /home/tur/proj/usb_sticks/u-boot
Wolfgang Denk [Thu, 13 Jul 2006 20:32:45 +0000 (22:32 +0200)]
Update CHANGELOG
Wolfgang Denk [Thu, 13 Jul 2006 20:12:58 +0000 (22:12 +0200)]
Merge with /home/mk/11-cmb1920/u-boot
Wolfgang Denk [Thu, 13 Jul 2006 14:29:40 +0000 (16:29 +0200)]
Cleanup duplicate definitions in MCC200 config file.
Bartlomiej Sieka [Thu, 13 Jul 2006 13:32:16 +0000 (15:32 +0200)]
Fix problems with SanDisk Corporation Cruzer Micro USB memory stick.
Markus Klotzbuecher [Wed, 12 Jul 2006 13:26:01 +0000 (15:26 +0200)]
Add support for TQM885D board.
Patch by Martin Krause, 20 Mar 2006
Signed-off-by: Martin Krause <martin.krause@tqs.de>
Markus Klotzbuecher [Wed, 12 Jul 2006 07:08:36 +0000 (09:08 +0200)]
Bugfix in FEC initialisation:
All MII configuration is done via FEC1 registers. But MII_SPEED was
configured according to FEC used. So if only FEC2 was used, this caused
the real MII_SPEED register in FEC1 to stay uninitalised, what lead
to "mii_send STUCK!" messages. Fix: always configure MII_SPEED on FEC1
only.
Markus Klotzbuecher [Wed, 12 Jul 2006 06:48:24 +0000 (08:48 +0200)]
Support for spc1920 board.
Patch by Markus Klotzbuecher, 12 Jul 2006
Wolfgang Denk [Mon, 10 Jul 2006 22:23:54 +0000 (00:23 +0200)]
MCC200 board: support console on any one of the Quad UART ports.
Wolfgang Denk [Mon, 10 Jul 2006 21:22:43 +0000 (23:22 +0200)]
Fix error in flash protection calculation on MCC200 board.
Wolfgang Denk [Mon, 10 Jul 2006 21:07:28 +0000 (23:07 +0200)]
Major PCMCIA Cleanup to make code better readable and maintainable.
Notes:
- Board-dependend code for RPXLITE and RPXCLASSIC-based boards
placed to the drivers/rpx_pmcia.c file to avoid duplication.
Same for TQM8xx-based boards (drivers/tqm8xx_pmcia.c).
- drivers/i82365.c has been split into two parts located at
board/atc/ti113x.c and board/cpc45/pd67290.c (ATC and CPC45 are
the only boards using CONFIG_82365).
- Changes were tested for clean build and *very* *few* boards.
Wolfgang Denk [Thu, 6 Jul 2006 20:31:16 +0000 (22:31 +0200)]
MCC200: map the 2nd Quad UART into the processor's address space.
Marian Balakowicz [Thu, 6 Jul 2006 19:17:24 +0000 (21:17 +0200)]
Fix timer problems on AMCC yucca board.
Set Timer Clock Select to use CPU clock as a timer input source.
Wolfgang Denk [Wed, 5 Jul 2006 08:42:14 +0000 (10:42 +0200)]
Bring yucca config more in line with other AMCC boards.
Wolfgang Denk [Wed, 5 Jul 2006 08:03:52 +0000 (10:03 +0200)]
Merge with /home/m8/git/u-boot
Marian Balakowicz [Tue, 4 Jul 2006 06:47:23 +0000 (08:47 +0200)]
Add AMCC bamboo board to MAKEALL build script.
Marian Balakowicz [Mon, 3 Jul 2006 23:27:46 +0000 (01:27 +0200)]
Fix AMCC bamboo eval board compilation errors.
Marian Balakowicz [Mon, 3 Jul 2006 22:55:47 +0000 (00:55 +0200)]
Add system memory to the PCI region list for AMCC PPC44x CPUs.
Enabled it for Yucca board.
Marian Balakowicz [Mon, 3 Jul 2006 21:42:36 +0000 (23:42 +0200)]
Cleanup config file and bootup output for Yucca board.
Wolfgang Denk [Fri, 30 Jun 2006 18:16:37 +0000 (20:16 +0200)]
Fix CHANGELOG
Wolfgang Denk [Fri, 30 Jun 2006 17:32:25 +0000 (19:32 +0200)]
Merge with /home/m8/git/u-boot
Marian Balakowicz [Fri, 30 Jun 2006 16:35:04 +0000 (18:35 +0200)]
Fix CONFIG_440_GX define usage.
Marian Balakowicz [Fri, 30 Jun 2006 16:23:06 +0000 (18:23 +0200)]
Remove autogenerated bmp_logo.h file.
Marian Balakowicz [Fri, 30 Jun 2006 16:19:42 +0000 (18:19 +0200)]
Merge: Add support for AMCC 440SPe CPU based eval board (Yucca).
Marian Balakowicz [Fri, 30 Jun 2006 14:30:46 +0000 (16:30 +0200)]
Add support for AMCC 440SPe CPU based eval board (Yucca).
Marian Balakowicz [Fri, 30 Jun 2006 13:27:09 +0000 (15:27 +0200)]
Call serial_initialize() before first debug() is used.
Wolfgang Denk [Mon, 26 Jun 2006 08:54:52 +0000 (10:54 +0200)]
Cleanup trab board for GCC-4.x
Wolfgang Denk [Mon, 19 Jun 2006 22:12:59 +0000 (00:12 +0200)]
Merge with /home/hs/U-Boot/u-boot-dev
Heiko Schocher [Mon, 19 Jun 2006 09:02:41 +0000 (11:02 +0200)]
Add support for wrPPMC7xx/74xx boards
Patch from Richard Danter, 12 Aug 2005
Wolfgang Denk [Sun, 18 Jun 2006 23:46:08 +0000 (01:46 +0200)]
Merge with ssh://atlas/home/wd/git/u-boot/work
Wolfgang Denk [Sun, 18 Jun 2006 23:37:03 +0000 (01:37 +0200)]
Merge with ssh://fifi/home/wd/git/u-boot/master
Wolfgang Denk [Fri, 16 Jun 2006 15:32:31 +0000 (17:32 +0200)]
Add support for gth2 board
Patch by Thomas Lange, Aug 11 2005
Wolfgang Denk [Fri, 16 Jun 2006 15:04:45 +0000 (17:04 +0200)]
Add support for CONFIG_SERIAL_MULTI on MPC5xxx
Patch by Martin Krause, 8 Jun 2006
This patch supports two serial consoles on boards with
a MPC5xxx CPU. The console can be switched at runtime
by setting stdin, stdout and stderr to the desired serial
interface (serial0 or serial1). The PSCs to be used as
console port are definded by CONFIG_PSC_CONSOLE
and CONFIG_PSC_CONSOLE2.
See README.serial_multi for details.
Wolfgang Denk [Fri, 16 Jun 2006 14:57:18 +0000 (16:57 +0200)]
Bugfix in I2C initialisation on S3C2400.
If the bus is blocked because of a previously interrupted
transfer, up to eleven clocks are generated on the I2CSCL
line to complete the transfer and to free the bus.
With this fix pin I2CSCL (PG6) is really configured as GPIO
so the clock pulses are really generated.
Patch by Martin Krause, 04 Apr 2006
Wolfgang Denk [Fri, 16 Jun 2006 14:53:06 +0000 (16:53 +0200)]
Fix DDR6 errata on TQM834x boards
Patch by Thomas Waehner, 07 Mar 2006