Colin Foster [Mon, 29 Nov 2021 01:57:36 +0000 (17:57 -0800)]
net: dsa: ocelot: seville: utilize of_mdiobus_register
Switch seville to use of_mdiobus_register(bus, NULL) instead of just
mdiobus_register. This code is about to be pulled into a separate module
that can optionally define ports by the device_node.
Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Colin Foster [Mon, 29 Nov 2021 01:57:35 +0000 (17:57 -0800)]
net: mdio: mscc-miim: convert to a regmap implementation
Utilize regmap instead of __iomem to perform indirect mdio access. This
will allow for custom regmaps to be used by way of the mscc_miim_setup
function.
Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 29 Nov 2021 12:58:39 +0000 (12:58 +0000)]
Merge branch 'lan966x-driver'
Horatiu Vultur says:
====================
net: lan966x: Add lan966x switch driver
This patch series add support for Microchip lan966x driver
The lan966x switch is a multi-port Gigabit AVB/TSN Ethernet Switch with
two integrated 10/100/1000Base-T PHYs. In addition to the integrated PHYs,
it supports up to 2RGMII/RMII, up to 3BASE-X/SERDES/2.5GBASE-X and up to
2 Quad-SGMII/Quad-USGMII interfaces.
Initially it adds support only for the ports to behave as simple
NIC cards. In the future patches it would be extended with other
functionality like Switchdev, PTP, Frame DMA, VCAP, etc.
v4->v5:
- more fixes to the reset of the switch, require all resources before
activating the hardware
- fix to lan966x-switch binding
- implement get/set_pauseparam in ethtool_ops
- stop calling lan966x_port_link_down when calling lan966x_port_pcs_set and
call it in lan966x_phylink_mac_link_down
v3->v4:
- add timeouts when injecting/extracting frames, in case the HW breaks
- simplify the creation of the IFH
- fix the order of operations in lan966x_cleanup_ports
- fixes to phylink based on Russel review
v2->v3:
- fix compiling issues for x86
- fix resource management in first patch
v1->v2:
- add new patch for MAINTAINERS
- add functions lan966x_mac_cpu_learn/forget
- fix build issues with second patch
- fix the reset of the switch, return error if there is no reset controller
- start to use phylink_mii_c22_pcs_decode_state and
phylink_mii_c22_pcs_encode_advertisement to remove duplicate code
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Horatiu Vultur [Mon, 29 Nov 2021 12:43:59 +0000 (13:43 +0100)]
net: lan966x: Update MAINTAINERS to include lan966x driver
Update MAINTAINERS to include lan966x driver
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Horatiu Vultur [Mon, 29 Nov 2021 12:43:58 +0000 (13:43 +0100)]
net: lan966x: add ethtool configuration and statistics
This patch adds support for statistics counters for the network
interfaces. Also adds support for configuring the network interface via
ethtool like: speed, duplex etc.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Horatiu Vultur [Mon, 29 Nov 2021 12:43:57 +0000 (13:43 +0100)]
net: lan966x: add mactable support
This patch adds support for MAC table operations like add and forget.
Also add the functionality to read the MAC address from DT, if there is
no MAC set in DT it would use a random one.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Horatiu Vultur [Mon, 29 Nov 2021 12:43:56 +0000 (13:43 +0100)]
net: lan966x: add port module support
This patch adds support for netdev and phylink in the switch. The
injection + extraction is register based. This will be replaced with DMA
accees.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Horatiu Vultur [Mon, 29 Nov 2021 12:43:55 +0000 (13:43 +0100)]
net: lan966x: add the basic lan966x driver
This patch adds basic SwitchDev driver framework for lan966x. It
includes only the IO range mapping and probing of the switch.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Horatiu Vultur [Mon, 29 Nov 2021 12:43:54 +0000 (13:43 +0100)]
dt-bindings: net: lan966x: Add lan966x-switch bindings
Document the lan966x switch device driver bindings
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Walleij [Mon, 22 Nov 2021 22:35:30 +0000 (23:35 +0100)]
net: ixp4xx_hss: Convert to use DT probing
IXP4xx is being migrated to device tree only. Convert this
driver to use device tree probing.
Pull in all the boardfile code from the one boardfile and
make it local, pull all the boardfile parameters from the
device tree instead of the board file.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Walleij [Mon, 22 Nov 2021 22:35:29 +0000 (23:35 +0100)]
dt-bindings: net: Add bindings for IXP4xx V.35 WAN HSS
This adds device tree bindings for the IXP4xx V.35 WAN high
speed serial (HSS) link.
An example is added to the NPE example where the HSS appears
as a child.
Cc: devicetree@vger.kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alvin Šipraga [Mon, 29 Nov 2021 10:30:19 +0000 (11:30 +0100)]
net: dsa: rtl8365mb: set RGMII RX delay in steps of 0.3 ns
A contact at Realtek has clarified what exactly the units of RGMII RX
delay are. The answer is that the unit of RX delay is "about 0.3 ns".
Take this into account when parsing rx-internal-delay-ps by
approximating the closest step value. Delays of more than 2.1 ns are
rejected.
This obviously contradicts the previous assumption in the driver that a
step value of 4 was "about 2 ns", but Realtek also points out that it is
easy to find more than one RX delay step value which makes RGMII work.
Fixes:
4af2950c50c8 ("net: dsa: realtek-smi: add rtl8365mb subdriver for RTL8365MB-VC")
Cc: Arınç ÜNAL <arinc.unal@arinc9.com>
Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Acked-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alvin Šipraga [Mon, 29 Nov 2021 10:30:18 +0000 (11:30 +0100)]
net: dsa: rtl8365mb: fix garbled comment
Fixes:
4af2950c50c8 ("net: dsa: realtek-smi: add rtl8365mb subdriver for RTL8365MB-VC")
Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alvin Šipraga [Mon, 29 Nov 2021 10:30:17 +0000 (11:30 +0100)]
net: dsa: realtek-smi: don't log an error on EPROBE_DEFER
Probe deferral is not an error, so don't log this as an error:
[0.590156] realtek-smi ethernet-switch: unable to register switch ret = -517
Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ivan Vecera [Mon, 29 Nov 2021 09:58:50 +0000 (10:58 +0100)]
selftests: net: bridge: fix typo in vlan_filtering dependency test
Prior patch:
]# TESTS=vlmc_filtering_test ./bridge_vlan_mcast.sh
TEST: Vlan multicast snooping enable [ OK ]
Device "bridge" does not exist.
TEST: Disable multicast vlan snooping when vlan filtering is disabled [FAIL]
Vlan filtering is disabled but multicast vlan snooping is still enabled
After patch:
# TESTS=vlmc_filtering_test ./bridge_vlan_mcast.sh
TEST: Vlan multicast snooping enable [ OK ]
TEST: Disable multicast vlan snooping when vlan filtering is disabled [ OK ]
Fixes:
f5a9dd58f48b7c ("selftests: net: bridge: add test for vlan_filtering dependency")
Cc: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 29 Nov 2021 12:46:52 +0000 (12:46 +0000)]
Merge branch 'mpls-cleanups'
Benjamin Poirier says:
====================
net: mpls: Cleanup nexthop iterator macros
The mpls macros for_nexthops and change_nexthops were probably copied
from decnet or ipv4 but they grew a superfluous variable and lost a
beneficial "const".
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Benjamin Poirier [Mon, 29 Nov 2021 06:23:16 +0000 (15:23 +0900)]
net: mpls: Make for_nexthops iterator const
There are separate for_nexthops and change_nexthops iterators. The
for_nexthops variant should use const.
Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Benjamin Poirier [Mon, 29 Nov 2021 06:23:15 +0000 (15:23 +0900)]
net: mpls: Remove duplicate variable from iterator macro
__nh is just a copy of nh with a different type.
Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 29 Nov 2021 12:27:34 +0000 (12:27 +0000)]
Merge branch 'qualcomm-bam-dmux'
Stephan Gerhold says:
====================
net: wwan: Add Qualcomm BAM-DMUX WWAN network driver
The BAM Data Multiplexer provides access to the network data channels
of modems integrated into many older Qualcomm SoCs, e.g. Qualcomm MSM8916
or MSM8974. This series adds a driver that allows using it.
All the changes in this patch series are based on a quite complicated
driver from Qualcomm [1]. The driver has been used in postmarketOS [2]
on various smartphones/tablets based on Qualcomm MSM8916 and MSM8974
for more than a year now with no reported problems. It works out of
the box with open-source WWAN userspace such as ModemManager.
[1]: https://source.codeaurora.org/quic/la/kernel/msm-3.10/tree/drivers/soc/qcom/bam_dmux.c?h=LA.BR.1.2.9.1-02310-8x16.0
[2]: https://postmarketos.org/
Changes in v3:
- Clarify DT schema based on discussion
- Drop bam_dma/dmaengine patches since they already landed in 5.16
- Rebase on net-next
- Simplify cover letter and commit messages
Changes in v2:
- Rename "qcom,remote-power-collapse" -> "qcom,powered-remotely"
- Rebase on net-next and fix conflicts
- Rename network interfaces from "rmnet%d" -> "wwan%d"
- Fix wrong file name in MAINTAINERS entry
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Stephan Gerhold [Sat, 27 Nov 2021 17:31:08 +0000 (18:31 +0100)]
net: wwan: Add Qualcomm BAM-DMUX WWAN network driver
The BAM Data Multiplexer provides access to the network data channels of
modems integrated into many older Qualcomm SoCs, e.g. Qualcomm MSM8916 or
MSM8974. It is built using a simple protocol layer on top of a DMA engine
(Qualcomm BAM) and bidirectional interrupts to coordinate power control.
The modem announces a fixed set of channels by sending an OPEN command.
The driver exports each channel as separate network interface so that
a connection can be established via QMI from userspace. The network
interface can work either in Ethernet or Raw-IP mode (configurable via
QMI). However, Ethernet mode seems to be broken with most firmwares
(network packets are actually received as Raw-IP), therefore the driver
only supports Raw-IP mode.
Note that the control channel (QMI/AT) is entirely separate from
BAM-DMUX and is already supported by the RPMSG_WWAN_CTRL driver.
The driver uses runtime PM to coordinate power control with the modem.
TX/RX buffers are put in a kind of "ring queue" and submitted via
the bam_dma driver of the DMAEngine subsystem.
The basic architecture looks roughly like this:
+------------+ +-------+
[IPv4/6] | BAM-DMUX | | |
[Data...] | | | |
---------->|wwan0 | [DMUX chan: x] | |
[IPv4/6] | (chan: 0) | [IPv4/6] | |
[Data...] | | [Data...] | |
---------->|wwan1 |--------------->| Modem |
| (chan: 1) | BAM | |
[IPv4/6] | ... | (DMA Engine) | |
[Data...] | | | |
---------->|wwan7 | | |
| (chan: 7) | | |
+------------+ +-------+
Note that some newer firmware versions support QMAP ("rmnet" driver)
as additional multiplexing layer on top of BAM-DMUX, but this is not
currently supported by this driver.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stephan Gerhold [Sat, 27 Nov 2021 17:31:07 +0000 (18:31 +0100)]
dt-bindings: net: Add schema for Qualcomm BAM-DMUX
The BAM Data Multiplexer provides access to the network data channels of
modems integrated into many older Qualcomm SoCs, e.g. Qualcomm MSM8916 or
MSM8974. It is built using a simple protocol layer on top of a DMA engine
(Qualcomm BAM) and bidirectional interrupts to coordinate power control.
The device tree node combines the incoming interrupt with the outgoing
interrupts (smem-states) as well as the two DMA channels, which allows
the BAM-DMUX driver to request all necessary resources.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 29 Nov 2021 12:19:53 +0000 (12:19 +0000)]
Merge branch 'vxlan-port'
Guangbin Huang says:
====================
net: vxlan: add macro definition for number of IANA VXLAN-GPE port
This series add macro definition for number of IANA VXLAN-GPE port for
cleanup.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Hao Chen [Sat, 27 Nov 2021 09:34:05 +0000 (17:34 +0800)]
net: hns3: use macro IANA_VXLAN_GPE_UDP_PORT to replace number 4790
This patch uses macro IANA_VXLAN_GPE_UDP_PORT to replace number 4790 for
cleanup.
Signed-off-by: Hao Chen <chenhao288@hisilicon.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hao Chen [Sat, 27 Nov 2021 09:34:04 +0000 (17:34 +0800)]
net: vxlan: add macro definition for number of IANA VXLAN-GPE port
Add macro definition for number of IANA VXLAN-GPE port for generic use.
Signed-off-by: Hao Chen <chenhao288@hisilicon.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sebastian Andrzej Siewior [Fri, 26 Nov 2021 16:15:29 +0000 (17:15 +0100)]
net: Write lock dev_base_lock without disabling bottom halves.
The writer acquires dev_base_lock with disabled bottom halves.
The reader can acquire dev_base_lock without disabling bottom halves
because there is no writer in softirq context.
On PREEMPT_RT the softirqs are preemptible and local_bh_disable() acts
as a lock to ensure that resources, that are protected by disabling
bottom halves, remain protected.
This leads to a circular locking dependency if the lock acquired with
disabled bottom halves (as in write_lock_bh()) and somewhere else with
enabled bottom halves (as by read_lock() in netstat_show()) followed by
disabling bottom halves (cxgb_get_stats() -> t4_wr_mbox_meat_timeout()
-> spin_lock_bh()). This is the reverse locking order.
All read_lock() invocation are from sysfs callback which are not invoked
from softirq context. Therefore there is no need to disable bottom
halves while acquiring a write lock.
Acquire the write lock of dev_base_lock without disabling bottom halves.
Reported-by: Pei Zhang <pezhang@redhat.com>
Reported-by: Luis Claudio R. Goncalves <lgoncalv@redhat.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tom Parkin [Fri, 26 Nov 2021 16:09:03 +0000 (16:09 +0000)]
net/l2tp: convert tunnel rwlock_t to rcu
Previously commit
e02d494d2c60 ("l2tp: Convert rwlock to RCU") converted
most, but not all, rwlock instances in the l2tp subsystem to RCU.
The remaining rwlock protects the per-tunnel hashlist of sessions which
is used for session lookups in the UDP-encap data path.
Convert the remaining rwlock to rcu to improve performance of UDP-encap
tunnels.
Note that the tunnel and session, which both live on RCU-protected
lists, use slightly different approaches to incrementing their refcounts
in the various getter functions.
The tunnel has to use refcount_inc_not_zero because the tunnel shutdown
process involves dropping the refcount to zero prior to synchronizing
RCU readers (via. kfree_rcu).
By contrast, the session shutdown removes the session from the list(s)
it is on, synchronizes with readers, and then decrements the session
refcount. Since the getter functions increment the session refcount
with the RCU read lock held we prevent getters seeing a zero session
refcount, and therefore don't need to use refcount_inc_not_zero.
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 29 Nov 2021 12:05:52 +0000 (12:05 +0000)]
Merge branch 'mvneta-next'
Maxime Chevallier says:
====================
net: mvneta: mqprio cleanups and shaping support
This is the second version of the series that adds some improvements to the
existing mqprio implementation in mvneta, and adds support for
egress shaping offload.
The first 3 patches are some minor cleanups, such as using the
tc_mqprio_qopt_offload structure to get access to more offloading
options, cleaning the logic to detect whether or not we should offload
mqprio setting, and allowing to have a 1 to N mapping between TCs and
queues.
The last patch adds traffic shaping offload, using mvneta's per-queue
token buckets, allowing to limit rates from 10Kbps up to 5Gbps with
10Kbps increments.
This was tested only on an Armada 3720, with traffic up to 2.5Gbps.
Changes since V1 fixes the build for 32bits kernels, using the right
div helpers as suggested by Jakub.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Maxime Chevallier [Fri, 26 Nov 2021 11:20:56 +0000 (12:20 +0100)]
net: mvneta: Add TC traffic shaping offload
The mvneta controller is able to do some tocken-bucket per-queue traffic
shaping. This commit adds support for setting these using the TC mqprio
interface.
The token-bucket parameters are customisable, but the current
implementation configures them to have a 10kbps resolution for the
rate limitation, since it allows to cover the whole range of max_rate
values from 10kbps to 5Gbps with 10kbps increments.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Maxime Chevallier [Fri, 26 Nov 2021 11:20:55 +0000 (12:20 +0100)]
net: mvneta: Allow having more than one queue per TC
The current mqprio implementation assumed that we are only using one
queue per TC. Use the offset and count parameters to allow using
multiple queues per TC. In that case, the controller will use a standard
round-robin algorithm to pick queues assigned to the same TC, with the
same priority.
This only applies to VLAN priorities in ingress traffic, each TC
corresponding to a vlan priority.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Maxime Chevallier [Fri, 26 Nov 2021 11:20:54 +0000 (12:20 +0100)]
net: mvneta: Don't force-set the offloading flag
The qopt->hw flag is set by the TC code according to the offloading mode
asked by user. Don't force-set it in the driver, but instead read it to
make sure we do what's asked.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Maxime Chevallier [Fri, 26 Nov 2021 11:20:53 +0000 (12:20 +0100)]
net: mvneta: Use struct tc_mqprio_qopt_offload for MQPrio configuration
The struct tc_mqprio_qopt_offload is a container for struct tc_mqprio_qopt,
that allows passing extra parameters, such as traffic shaping. This commit
converts the current mqprio code to that new struct.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yang Yingliang [Fri, 26 Nov 2021 09:13:40 +0000 (17:13 +0800)]
net: mdio: ipq8064: replace ioremap() with devm_ioremap()
Use devm_ioremap() instead of ioremap() to avoid iounmap() missing.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Sat, 27 Nov 2021 02:02:02 +0000 (18:02 -0800)]
Merge branch 'af_unix-replace-unix_table_lock-with-per-hash-locks'
Kuniyuki Iwashima says:
====================
af_unix: Replace unix_table_lock with per-hash locks.
The hash table of AF_UNIX sockets is protected by a single big lock,
unix_table_lock. This series replaces it with small per-hash locks.
1st - 2nd : Misc refactoring
3rd - 8th : Separate BSD/abstract address logics
9th - 11th : Prep to save a hash in each socket
12th : Replace the big lock
13th : Speed up autobind()
Note to maintainers:
The 12th patch adds two kinds of Sparse warnings on patchwork:
about unix_table_double_lock/unlock()
We can avoid this by adding two apparent acquires/releases annotations,
but there are the same kinds of warnings about unix_state_double_lock().
about unix_next_socket() and unix_seq_stop() (/proc/net/unix)
This is because Sparse does not understand logic in unix_next_socket(),
which leaves a spin lock held until it returns NULL.
Also, tcp_seq_stop() causes a warning for the same reason.
These warnings seem reasonable, but let me know if there is any better way.
Please see [0] for details.
[0]: https://lore.kernel.org/netdev/
20211117001611.74123-1-kuniyu@amazon.co.jp/
====================
Link: https://lore.kernel.org/r/20211124021431.48956-1-kuniyu@amazon.co.jp
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Kuniyuki Iwashima [Wed, 24 Nov 2021 02:14:31 +0000 (11:14 +0900)]
af_unix: Relax race in unix_autobind().
When we bind an AF_UNIX socket without a name specified, the kernel selects
an available one from 0x00000 to 0xFFFFF. unix_autobind() starts searching
from a number in the 'static' variable and increments it after acquiring
two locks.
If multiple processes try autobind, they obtain the same lock and check if
a socket in the hash list has the same name. If not, one process uses it,
and all except one end up retrying the _next_ number (actually not, it may
be incremented by the other processes). The more we autobind sockets in
parallel, the longer the latency gets. We can avoid such a race by
searching for a name from a random number.
These show latency in unix_autobind() while 64 CPUs are simultaneously
autobind-ing 1024 sockets for each.
Without this patch:
usec : count distribution
0 : 1176 |*** |
2 : 3655 |*********** |
4 : 4094 |************* |
6 : 3831 |************ |
8 : 3829 |************ |
10 : 3844 |************ |
12 : 3638 |*********** |
14 : 2992 |********* |
16 : 2485 |******* |
18 : 2230 |******* |
20 : 2095 |****** |
22 : 1853 |***** |
24 : 1827 |***** |
26 : 1677 |***** |
28 : 1473 |**** |
30 : 1573 |***** |
32 : 1417 |**** |
34 : 1385 |**** |
36 : 1345 |**** |
38 : 1344 |**** |
40 : 1200 |*** |
With this patch:
usec : count distribution
0 : 1855 |****** |
2 : 6464 |********************* |
4 : 9936 |******************************** |
6 : 12107 |****************************************|
8 : 10441 |********************************** |
10 : 7264 |*********************** |
12 : 4254 |************** |
14 : 2538 |******** |
16 : 1596 |***** |
18 : 1088 |*** |
20 : 800 |** |
22 : 670 |** |
24 : 601 |* |
26 : 562 |* |
28 : 525 |* |
30 : 446 |* |
32 : 378 |* |
34 : 337 |* |
36 : 317 |* |
38 : 314 |* |
40 : 298 | |
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Kuniyuki Iwashima [Wed, 24 Nov 2021 02:14:30 +0000 (11:14 +0900)]
af_unix: Replace the big lock with small locks.
The hash table of AF_UNIX sockets is protected by the single lock. This
patch replaces it with per-hash locks.
The effect is noticeable when we handle multiple sockets simultaneously.
Here is a test result on an EC2 c5.24xlarge instance. It shows latency
(under 10us only) in unix_insert_unbound_socket() while 64 CPUs creating
1024 sockets for each in parallel.
Without this patch:
nsec : count distribution
0 : 179 | |
500 : 3021 |********* |
1000 : 6271 |******************* |
1500 : 6318 |******************* |
2000 : 5828 |***************** |
2500 : 5124 |*************** |
3000 : 4426 |************* |
3500 : 3672 |*********** |
4000 : 3138 |********* |
4500 : 2811 |******** |
5000 : 2384 |******* |
5500 : 2023 |****** |
6000 : 1954 |***** |
6500 : 1737 |***** |
7000 : 1749 |***** |
7500 : 1520 |**** |
8000 : 1469 |**** |
8500 : 1394 |**** |
9000 : 1232 |*** |
9500 : 1138 |*** |
10000 : 994 |*** |
With this patch:
nsec : count distribution
0 : 1634 |**** |
500 : 13170 |****************************************|
1000 : 13156 |*************************************** |
1500 : 9010 |*************************** |
2000 : 6363 |******************* |
2500 : 4443 |************* |
3000 : 3240 |********* |
3500 : 2549 |******* |
4000 : 1872 |***** |
4500 : 1504 |**** |
5000 : 1247 |*** |
5500 : 1035 |*** |
6000 : 889 |** |
6500 : 744 |** |
7000 : 634 |* |
7500 : 498 |* |
8000 : 433 |* |
8500 : 355 |* |
9000 : 336 |* |
9500 : 284 | |
10000 : 243 | |
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Kuniyuki Iwashima [Wed, 24 Nov 2021 02:14:29 +0000 (11:14 +0900)]
af_unix: Save hash in sk_hash.
To replace unix_table_lock with per-hash locks in the next patch, we need
to save a hash in each socket because /proc/net/unix or BPF prog iterate
sockets while holding a hash table lock and release it later in a different
function.
Currently, we store a real/pseudo hash in struct unix_address. However, we
do not allocate it to unbound sockets, nor should we do just for that. For
this purpose, we can use sk_hash. Then, we no longer use the hash field in
struct unix_address and can remove it.
Also, this patch does
- rename unix_insert_socket() to unix_insert_unbound_socket()
- remove the redundant list argument from __unix_insert_socket() and
unix_insert_unbound_socket()
- use 'unsigned int' instead of 'unsigned' in __unix_set_addr_hash()
- remove 'inline' from unix_remove_socket() and
unix_insert_unbound_socket().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Kuniyuki Iwashima [Wed, 24 Nov 2021 02:14:28 +0000 (11:14 +0900)]
af_unix: Add helpers to calculate hashes.
This patch adds three helper functions that calculate hashes for unbound
sockets and bound sockets with BSD/abstract addresses.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Kuniyuki Iwashima [Wed, 24 Nov 2021 02:14:27 +0000 (11:14 +0900)]
af_unix: Remove UNIX_ABSTRACT() macro and test sun_path[0] instead.
In BSD and abstract address cases, we store sockets in the hash table with
keys between 0 and UNIX_HASH_SIZE - 1. However, the hash saved in a socket
varies depending on its address type; sockets with BSD addresses always
have UNIX_HASH_SIZE in their unix_sk(sk)->addr->hash.
This is just for the UNIX_ABSTRACT() macro used to check the address type.
The difference of the saved hashes comes from the first byte of the address
in the first place. So, we can test it directly.
Then we can keep a real hash in each socket and replace unix_table_lock
with per-hash locks in the later patch.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Kuniyuki Iwashima [Wed, 24 Nov 2021 02:14:26 +0000 (11:14 +0900)]
af_unix: Allocate unix_address in unix_bind_(bsd|abstract)().
To terminate address with '\0' in unix_bind_bsd(), we add
unix_create_addr() and call it in unix_bind_bsd() and unix_bind_abstract().
Also, unix_bind_abstract() does not return -EEXIST. Only
kern_path_create() and vfs_mknod() in unix_bind_bsd() can return it,
so we move the last error check in unix_bind() to unix_bind_bsd().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Kuniyuki Iwashima [Wed, 24 Nov 2021 02:14:25 +0000 (11:14 +0900)]
af_unix: Remove unix_mkname().
This patch removes unix_mkname() and postpones calculating a hash to
unix_bind_abstract(). Some BSD stuffs still remain in unix_bind()
though, the next patch packs them into unix_bind_bsd().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Kuniyuki Iwashima [Wed, 24 Nov 2021 02:14:24 +0000 (11:14 +0900)]
af_unix: Copy unix_mkname() into unix_find_(bsd|abstract)().
We should not call unix_mkname() before unix_find_other() and instead do
the same thing where necessary based on the address type:
- terminating the address with '\0' in unix_find_bsd()
- calculating the hash in unix_find_abstract().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Kuniyuki Iwashima [Wed, 24 Nov 2021 02:14:23 +0000 (11:14 +0900)]
af_unix: Cut unix_validate_addr() out of unix_mkname().
unix_mkname() tests socket address length and family and does some
processing based on the address type. It is called in the early stage,
and therefore some instructions are redundant and can end up in vain.
The address length/family tests are done twice in unix_bind(). Also, the
address type is rechecked later in unix_bind() and unix_find_other(), where
we can do the same processing. Moreover, in the BSD address case, the hash
is set to 0 but never used and confusing.
This patch moves the address tests out of unix_mkname(), and the following
patches move the other part into appropriate places and remove
unix_mkname() finally.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Kuniyuki Iwashima [Wed, 24 Nov 2021 02:14:22 +0000 (11:14 +0900)]
af_unix: Return an error as a pointer in unix_find_other().
We can return an error as a pointer and need not pass an additional
argument to unix_find_other().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Kuniyuki Iwashima [Wed, 24 Nov 2021 02:14:21 +0000 (11:14 +0900)]
af_unix: Factorise unix_find_other() based on address types.
As done in the commit
fa42d910a38e ("unix_bind(): take BSD and abstract
address cases into new helpers"), this patch moves BSD and abstract address
cases from unix_find_other() into unix_find_bsd() and unix_find_abstract().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Kuniyuki Iwashima [Wed, 24 Nov 2021 02:14:20 +0000 (11:14 +0900)]
af_unix: Pass struct sock to unix_autobind().
We do not use struct socket in unix_autobind() and pass struct sock to
unix_bind_bsd() and unix_bind_abstract(). Let's pass it to unix_autobind()
as well.
Also, this patch fixes these errors by checkpatch.pl.
ERROR: do not use assignment in if condition
#1795: FILE: net/unix/af_unix.c:1795:
+ if (test_bit(SOCK_PASSCRED, &sock->flags) && !u->addr
CHECK: Logical continuations should be on the previous line
#1796: FILE: net/unix/af_unix.c:1796:
+ if (test_bit(SOCK_PASSCRED, &sock->flags) && !u->addr
+ && (err = unix_autobind(sock)) != 0)
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Kuniyuki Iwashima [Wed, 24 Nov 2021 02:14:19 +0000 (11:14 +0900)]
af_unix: Use offsetof() instead of sizeof().
The length of the AF_UNIX socket address contains an offset to the member
sun_path of struct sockaddr_un.
Currently, the preceding member is just sun_family, and its type is
sa_family_t and resolved to short. Therefore, the offset is represented by
sizeof(short). However, it is not clear and fragile to changes in struct
sockaddr_storage or sockaddr_un.
This commit makes it clear and robust by rewriting sizeof() with
offsetof().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Xin Long [Wed, 24 Nov 2021 19:39:33 +0000 (14:39 -0500)]
bridge: use __set_bit in __br_vlan_set_default_pvid
The same optimization as the one in commit
cc0be1ad686f ("net:
bridge: Slightly optimize 'find_portno()'") is needed for the
'changed' bitmap in __br_vlan_set_default_pvid().
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Link: https://lore.kernel.org/r/4e35f415226765e79c2a11d2c96fbf3061c486e2.1637782773.git.lucien.xin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tonghao Zhang [Thu, 25 Nov 2021 16:30:49 +0000 (00:30 +0800)]
net: ethtool: set a default driver name
The netdev (e.g. ifb, bareudp), which not support ethtool ops
(e.g. .get_drvinfo), we can use the rtnl kind as a default name.
ifb netdev may be created by others prefix, not ifbX.
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Hao Chen <chenhao288@hisilicon.com>
Cc: Heiner Kallweit <hkallweit1@gmail.com>
Cc: "Gustavo A. R. Silva" <gustavoars@kernel.org>
Cc: Danielle Ratson <danieller@nvidia.com>
Cc: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/20211125163049.84970-1-xiangxia.m.yue@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Sat, 27 Nov 2021 00:43:20 +0000 (16:43 -0800)]
Merge branch 'selftests-net-bridge-vlan-multicast-tests'
Nikolay Aleksandrov says:
====================
selftests: net: bridge: vlan multicast tests
This patch-set adds selftests for the new vlan multicast options that
were recently added. Most of the tests check for default values,
changing options and try to verify that the changes actually take
effect. The last test checks if the dependency between vlan_filtering
and mcast_vlan_snooping holds. The rest are pretty self-explanatory.
TEST: Vlan multicast snooping enable [ OK ]
TEST: Vlan global options existence [ OK ]
TEST: Vlan mcast_snooping global option default value [ OK ]
TEST: Vlan 10 multicast snooping control [ OK ]
TEST: Vlan mcast_querier global option default value [ OK ]
TEST: Vlan 10 multicast querier enable [ OK ]
TEST: Vlan 10 tagged IGMPv2 general query sent [ OK ]
TEST: Vlan 10 tagged MLD general query sent [ OK ]
TEST: Vlan mcast_igmp_version global option default value [ OK ]
TEST: Vlan mcast_mld_version global option default value [ OK ]
TEST: Vlan 10 mcast_igmp_version option changed to 3 [ OK ]
TEST: Vlan 10 tagged IGMPv3 general query sent [ OK ]
TEST: Vlan 10 mcast_mld_version option changed to 2 [ OK ]
TEST: Vlan 10 tagged MLDv2 general query sent [ OK ]
TEST: Vlan mcast_last_member_count global option default value [ OK ]
TEST: Vlan mcast_last_member_interval global option default value [ OK ]
TEST: Vlan 10 mcast_last_member_count option changed to 3 [ OK ]
TEST: Vlan 10 mcast_last_member_interval option changed to 200 [ OK ]
TEST: Vlan mcast_startup_query_interval global option default value [ OK ]
TEST: Vlan mcast_startup_query_count global option default value [ OK ]
TEST: Vlan 10 mcast_startup_query_interval option changed to 100 [ OK ]
TEST: Vlan 10 mcast_startup_query_count option changed to 3 [ OK ]
TEST: Vlan mcast_membership_interval global option default value [ OK ]
TEST: Vlan 10 mcast_membership_interval option changed to 200 [ OK ]
TEST: Vlan 10 mcast_membership_interval mdb entry expire [ OK ]
TEST: Vlan mcast_querier_interval global option default value [ OK ]
TEST: Vlan 10 mcast_querier_interval option changed to 100 [ OK ]
TEST: Vlan 10 mcast_querier_interval expire after outside query [ OK ]
TEST: Vlan mcast_query_interval global option default value [ OK ]
TEST: Vlan 10 mcast_query_interval option changed to 200 [ OK ]
TEST: Vlan mcast_query_response_interval global option default value [ OK ]
TEST: Vlan 10 mcast_query_response_interval option changed to 200 [ OK ]
TEST: Port vlan 10 option mcast_router default value [ OK ]
TEST: Port vlan 10 mcast_router option changed to 2 [ OK ]
TEST: Flood unknown vlan multicast packets to router port only [ OK ]
TEST: Disable multicast vlan snooping when vlan filtering is disabled [ OK ]
====================
Link: https://lore.kernel.org/r/20211125140858.3639139-1-razor@blackwall.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Nikolay Aleksandrov [Thu, 25 Nov 2021 14:08:58 +0000 (16:08 +0200)]
selftests: net: bridge: add test for vlan_filtering dependency
Add a test for dependency of mcast_vlan_snooping on vlan_filtering. If
vlan_filtering gets disabled, then mcast_vlan_snooping must be
automatically disabled as well.
TEST: Disable multicast vlan snooping when vlan filtering is disabled [ OK ]
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Nikolay Aleksandrov [Thu, 25 Nov 2021 14:08:57 +0000 (16:08 +0200)]
selftests: net: bridge: add vlan mcast_router tests
Add tests for the new per-port/vlan mcast_router option, verify that
unknown multicast packets are flooded only to router ports.
TEST: Port vlan 10 option mcast_router default value [ OK ]
TEST: Port vlan 10 mcast_router option changed to 2 [ OK ]
TEST: Flood unknown vlan multicast packets to router port only [ OK ]
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Nikolay Aleksandrov [Thu, 25 Nov 2021 14:08:56 +0000 (16:08 +0200)]
selftests: net: bridge: add vlan mcast query and query response interval tests
Add tests which change the new per-vlan mcast_query_interval and verify
the new value is in effect, also add a test to change
mcast_query_response_interval's value.
TEST: Vlan mcast_query_interval global option default value [ OK ]
TEST: Vlan 10 mcast_query_interval option changed to 200 [ OK ]
TEST: Vlan mcast_query_response_interval global option default value [ OK ]
TEST: Vlan 10 mcast_query_response_interval option changed to 200 [ OK ]
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Nikolay Aleksandrov [Thu, 25 Nov 2021 14:08:55 +0000 (16:08 +0200)]
selftests: net: bridge: add vlan mcast_querier_interval tests
Add tests which change the new per-vlan mcast_querier_interval and
verify that it is taken into account when an outside querier is present.
TEST: Vlan mcast_querier_interval global option default value [ OK ]
TEST: Vlan 10 mcast_querier_interval option changed to 100 [ OK ]
TEST: Vlan 10 mcast_querier_interval expire after outside query [ OK ]
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Nikolay Aleksandrov [Thu, 25 Nov 2021 14:08:54 +0000 (16:08 +0200)]
selftests: net: bridge: add vlan mcast_membership_interval test
Add a test which changes the new per-vlan mcast_membership_interval and
verifies that a newly learned mdb entry would expire in that interval.
TEST: Vlan mcast_membership_interval global option default value [ OK ]
TEST: Vlan 10 mcast_membership_interval option changed to 200 [ OK ]
TEST: Vlan 10 mcast_membership_interval mdb entry expire [ OK ]
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Nikolay Aleksandrov [Thu, 25 Nov 2021 14:08:53 +0000 (16:08 +0200)]
selftests: net: bridge: add vlan mcast_startup_query_count/interval tests
Add tests which change the new per-vlan startup query count/interval
options and verify the proper number of queries are sent in the expected
interval.
TEST: Vlan mcast_startup_query_interval global option default value [ OK ]
TEST: Vlan mcast_startup_query_count global option default value [ OK ]
TEST: Vlan 10 mcast_startup_query_interval option changed to 100 [ OK ]
TEST: Vlan 10 mcast_startup_query_count option changed to 3 [ OK ]
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Nikolay Aleksandrov [Thu, 25 Nov 2021 14:08:52 +0000 (16:08 +0200)]
selftests: net: bridge: add vlan mcast_last_member_count/interval tests
Add tests which verify the default values of mcast_last_member_count
mcast_last_member_count and also try to change them.
TEST: Vlan mcast_last_member_count global option default value [ OK ]
TEST: Vlan mcast_last_member_interval global option default value [ OK ]
TEST: Vlan 10 mcast_last_member_count option changed to 3 [ OK ]
TEST: Vlan 10 mcast_last_member_interval option changed to 200 [ OK ]
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Nikolay Aleksandrov [Thu, 25 Nov 2021 14:08:51 +0000 (16:08 +0200)]
selftests: net: bridge: add vlan mcast igmp/mld version tests
Add tests which change the new per-vlan IGMP/MLD versions and verify
that proper tagged general query packets are sent.
TEST: Vlan mcast_igmp_version global option default value [ OK ]
TEST: Vlan mcast_mld_version global option default value [ OK ]
TEST: Vlan 10 mcast_igmp_version option changed to 3 [ OK ]
TEST: Vlan 10 tagged IGMPv3 general query sent [ OK ]
TEST: Vlan 10 mcast_mld_version option changed to 2 [ OK ]
TEST: Vlan 10 tagged MLDv2 general query sent [ OK ]
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Nikolay Aleksandrov [Thu, 25 Nov 2021 14:08:50 +0000 (16:08 +0200)]
selftests: net: bridge: add vlan mcast querier test
Add a test to try the new global vlan mcast_querier control and also
verify that tagged general query packets are properly generated when
querier is enabled for a single vlan.
TEST: Vlan mcast_querier global option default value [ OK ]
TEST: Vlan 10 multicast querier enable [ OK ]
TEST: Vlan 10 tagged IGMPv2 general query sent [ OK ]
TEST: Vlan 10 tagged MLD general query sent [ OK ]
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Nikolay Aleksandrov [Thu, 25 Nov 2021 14:08:49 +0000 (16:08 +0200)]
selftests: net: bridge: add vlan mcast snooping control test
Add the first test for bridge per-vlan multicast snooping which checks
if control of the global and per-vlan options work as expected, joins
and leaves are tested at each option value.
TEST: Vlan multicast snooping enable [ OK ]
TEST: Vlan global options existence [ OK ]
TEST: Vlan mcast_snooping global option default value [ OK ]
TEST: Vlan 10 multicast snooping control [ OK ]
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Fri, 26 Nov 2021 21:26:29 +0000 (13:26 -0800)]
Merge git://git./linux/kernel/git/netdev/net
drivers/net/ipa/ipa_main.c
8afc7e471ad3 ("net: ipa: separate disabling setup from modem stop")
76b5fbcd6b47 ("net: ipa: kill ipa_modem_init()")
Duplicated include, drop one.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Linus Torvalds [Fri, 26 Nov 2021 20:58:53 +0000 (12:58 -0800)]
Merge tag 'net-5.16-rc3' of git://git./linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Networking fixes, including fixes from netfilter.
Current release - regressions:
- r8169: fix incorrect mac address assignment
- vlan: fix underflow for the real_dev refcnt when vlan creation
fails
- smc: avoid warning of possible recursive locking
Current release - new code bugs:
- vsock/virtio: suppress used length validation
- neigh: fix crash in v6 module initialization error path
Previous releases - regressions:
- af_unix: fix change in behavior in read after shutdown
- igb: fix netpoll exit with traffic, avoid warning
- tls: fix splice_read() when starting mid-record
- lan743x: fix deadlock in lan743x_phy_link_status_change()
- marvell: prestera: fix bridge port operation
Previous releases - always broken:
- tcp_cubic: fix spurious Hystart ACK train detections for
not-cwnd-limited flows
- nexthop: fix refcount issues when replacing IPv6 groups
- nexthop: fix null pointer dereference when IPv6 is not enabled
- phylink: force link down and retrigger resolve on interface change
- mptcp: fix delack timer length calculation and incorrect early
clearing
- ieee802154: handle iftypes as u32, prevent shift-out-of-bounds
- nfc: virtual_ncidev: change default device permissions
- netfilter: ctnetlink: fix error codes and flags used for kernel
side filtering of dumps
- netfilter: flowtable: fix IPv6 tunnel addr match
- ncsi: align payload to 32-bit to fix dropped packets
- iavf: fix deadlock and loss of config during VF interface reset
- ice: avoid bpf_prog refcount underflow
- ocelot: fix broken PTP over IP and PTP API violations
Misc:
- marvell: mvpp2: increase MTU limit when XDP enabled"
* tag 'net-5.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (94 commits)
net: dsa: microchip: implement multi-bridge support
net: mscc: ocelot: correctly report the timestamping RX filters in ethtool
net: mscc: ocelot: set up traps for PTP packets
net: ptp: add a definition for the UDP port for IEEE 1588 general messages
net: mscc: ocelot: create a function that replaces an existing VCAP filter
net: mscc: ocelot: don't downgrade timestamping RX filters in SIOCSHWTSTAMP
net: hns3: fix incorrect components info of ethtool --reset command
net: hns3: fix one incorrect value of page pool info when queried by debugfs
net: hns3: add check NULL address for page pool
net: hns3: fix VF RSS failed problem after PF enable multi-TCs
net: qed: fix the array may be out of bound
net/smc: Don't call clcsock shutdown twice when smc shutdown
net: vlan: fix underflow for the real_dev refcnt
ptp: fix filter names in the documentation
ethtool: ioctl: fix potential NULL deref in ethtool_set_coalesce()
nfc: virtual_ncidev: change default device permissions
net/sched: sch_ets: don't peek at classes beyond 'nbands'
net: stmmac: Disable Tx queues when reconfiguring the interface
selftests: tls: test for correct proto_ops
tls: fix replacing proto_ops
...
Oleksij Rempel [Fri, 26 Nov 2021 12:39:26 +0000 (13:39 +0100)]
net: dsa: microchip: implement multi-bridge support
Current driver version is able to handle only one bridge at time.
Configuring two bridges on two different ports would end up shorting this
bridges by HW. To reproduce it:
ip l a name br0 type bridge
ip l a name br1 type bridge
ip l s dev br0 up
ip l s dev br1 up
ip l s lan1 master br0
ip l s dev lan1 up
ip l s lan2 master br1
ip l s dev lan2 up
Ping on lan1 and get response on lan2, which should not happen.
This happened, because current driver version is storing one global "Port VLAN
Membership" and applying it to all ports which are members of any
bridge.
To solve this issue, we need to handle each port separately.
This patch is dropping the global port member storage and calculating
membership dynamically depending on STP state and bridge participation.
Note: STP support was broken before this patch and should be fixed
separately.
Fixes:
c2e866911e25 ("net: dsa: microchip: break KSZ9477 DSA driver into two files")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://lore.kernel.org/r/20211126123926.2981028-1-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Linus Torvalds [Fri, 26 Nov 2021 20:19:13 +0000 (12:19 -0800)]
Merge tag 'acpi-5.16-rc3' of git://git./linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These fix a NULL pointer dereference in the CPPC library code and a
locking issue related to printing the names of ACPI device nodes in
the device properties framework.
Specifics:
- Fix NULL pointer dereference in the CPPC library code occuring on
hybrid systems without CPPC support (Rafael Wysocki).
- Avoid attempts to acquire a semaphore with interrupts off when
printing the names of ACPI device nodes and clean up code on top of
that fix (Sakari Ailus)"
* tag 'acpi-5.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: CPPC: Add NULL pointer check to cppc_get_perf()
ACPI: Make acpi_node_get_parent() local
ACPI: Get acpi_device's parent from the parent field
Linus Torvalds [Fri, 26 Nov 2021 20:14:50 +0000 (12:14 -0800)]
Merge tag 'pm-5.16-rc3' of git://git./linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These address three issues in the intel_pstate driver and fix two
problems related to hibernation.
Specifics:
- Make intel_pstate work correctly on Ice Lake server systems with
out-of-band performance control enabled (Adamos Ttofari).
- Fix EPP handling in intel_pstate during CPU offline and online in
the active mode (Rafael Wysocki).
- Make intel_pstate support ITMT on asymmetric systems with
overclocking enabled (Srinivas Pandruvada).
- Fix hibernation image saving when using the user space interface
based on the snapshot special device file (Evan Green).
- Make the hibernation code release the snapshot block device using
the same mode that was used when acquiring it (Thomas Zeitlhofer)"
* tag 'pm-5.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM: hibernate: Fix snapshot partial write lengths
PM: hibernate: use correct mode for swsusp_close()
cpufreq: intel_pstate: ITMT support for overclocked system
cpufreq: intel_pstate: Fix active mode offline/online EPP handling
cpufreq: intel_pstate: Add Ice Lake server to out-of-band IDs
Linus Torvalds [Fri, 26 Nov 2021 20:01:31 +0000 (12:01 -0800)]
Merge tag 'fuse-fixes-5.16-rc3' of git://git./linux/kernel/git/mszeredi/fuse
Pull fuse fix from Miklos Szeredi:
"Fix a regression caused by a bugfix in the previous release. The
symptom is a VM_BUG_ON triggered from splice to the fuse device.
Unfortunately the original bugfix was already backported to a number
of stable releases, so this fix-fix will need to be backported as
well"
* tag 'fuse-fixes-5.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
fuse: release pipe buf after last use
Jakub Kicinski [Fri, 26 Nov 2021 19:38:23 +0000 (11:38 -0800)]
Merge branch 'fix-broken-ptp-over-ip-on-ocelot-switches'
Vladimir Oltean says:
====================
Fix broken PTP over IP on Ocelot switches
Changes in v2: added patch 5, added Richard's ack for the whole series
sans patch 5 which is new.
Po Liu reported recently that timestamping PTP over IPv4 is broken using
the felix driver on NXP LS1028A. This has been known for a while, of
course, since it has always been broken. The reason is because IP PTP
packets are currently treated as unknown IP multicast, which is not
flooded to the CPU port in the ocelot driver design, so packets don't
reach the ptp4l program.
The series solves the problem by installing packet traps per port when
the timestamping ioctl is called, depending on the RX filter selected
(L2, L4 or both).
====================
Link: https://lore.kernel.org/r/20211126172845.3149260-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean [Fri, 26 Nov 2021 17:28:45 +0000 (19:28 +0200)]
net: mscc: ocelot: correctly report the timestamping RX filters in ethtool
The driver doesn't support RX timestamping for non-PTP packets, but it
declares that it does. Restrict the reported RX filters to PTP v2 over
L2 and over L4.
Fixes:
4e3b0468e6d7 ("net: mscc: PTP Hardware Clock (PHC) support")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean [Fri, 26 Nov 2021 17:28:44 +0000 (19:28 +0200)]
net: mscc: ocelot: set up traps for PTP packets
IEEE 1588 support was declared too soon for the Ocelot switch. Out of
reset, this switch does not apply any special treatment for PTP packets,
i.e. when an event message is received, the natural tendency is to
forward it by MAC DA/VLAN ID. This poses a problem when the ingress port
is under a bridge, since user space application stacks (written
primarily for endpoint ports, not switches) like ptp4l expect that PTP
messages are always received on AF_PACKET / AF_INET sockets (depending
on the PTP transport being used), and never being autonomously
forwarded. Any forwarding, if necessary (for example in Transparent
Clock mode) is handled in software by ptp4l. Having the hardware forward
these packets too will cause duplicates which will confuse endpoints
connected to these switches.
So PTP over L2 barely works, in the sense that PTP packets reach the CPU
port, but they reach it via flooding, and therefore reach lots of other
unwanted destinations too. But PTP over IPv4/IPv6 does not work at all.
This is because the Ocelot switch have a separate destination port mask
for unknown IP multicast (which PTP over IP is) flooding compared to
unknown non-IP multicast (which PTP over L2 is) flooding. Specifically,
the driver allows the CPU port to be in the PGID_MC port group, but not
in PGID_MCIPV4 and PGID_MCIPV6. There are several presentations from
Allan Nielsen which explain that the embedded MIPS CPU on Ocelot
switches is not very powerful at all, so every penny they could save by
not allowing flooding to the CPU port module matters. Unknown IP
multicast did not make it.
The de facto consensus is that when a switch is PTP-aware and an
application stack for PTP is running, switches should have some sort of
trapping mechanism for PTP packets, to extract them from the hardware
data path. This avoids both problems:
(a) PTP packets are no longer flooded to unwanted destinations
(b) PTP over IP packets are no longer denied from reaching the CPU since
they arrive there via a trap and not via flooding
It is not the first time when this change is attempted. Last time, the
feedback from Allan Nielsen and Andrew Lunn was that the traps should
not be installed by default, and that PTP-unaware switching may be
desired for some use cases:
https://patchwork.ozlabs.org/project/netdev/patch/
20190813025214.18601-5-yangbo.lu@nxp.com/
To address that feedback, the present patch adds the necessary packet
traps according to the RX filter configuration transmitted by user space
through the SIOCSHWTSTAMP ioctl. Trapping is done via VCAP IS2, where we
keep 5 filters, which are amended each time RX timestamping is enabled
or disabled on a port:
- 1 for PTP over L2
- 2 for PTP over IPv4 (UDP ports 319 and 320)
- 2 for PTP over IPv6 (UDP ports 319 and 320)
The cookie by which these filters (invisible to tc) are identified is
strategically chosen such that it does not collide with the filters used
for the ocelot-8021q tagging protocol by the Felix driver, or with the
MRP traps set up by the Ocelot library.
Other alternatives were considered, like patching user space to do
something, but there are so many ways in which PTP packets could be made
to reach the CPU, generically speaking, that "do what?" is a very valid
question. The ptp4l program from the linuxptp stack already attempts to
do something: it calls setsockopt(IP_ADD_MEMBERSHIP) (and
PACKET_ADD_MEMBERSHIP, respectively) which translates in both cases into
a dev_mc_add() on the interface, in the kernel:
https://github.com/richardcochran/linuxptp/blob/v3.1.1/udp.c#L73
https://github.com/richardcochran/linuxptp/blob/v3.1.1/raw.c
Reality shows that this is not sufficient in case the interface belongs
to a switchdev driver, as dev_mc_add() does not show the intention to
trap a packet to the CPU, but rather the intention to not drop it (it is
strictly for RX filtering, same as promiscuous does not mean to send all
traffic to the CPU, but to not drop traffic with unknown MAC DA). This
topic is a can of worms in itself, and it would be great if user space
could just stay out of it.
On the other hand, setting up PTP traps privately within the driver is
not new by any stretch of the imagination:
https://elixir.bootlin.com/linux/v5.16-rc2/source/drivers/net/ethernet/mellanox/mlxsw/spectrum_ptp.c#L833
https://elixir.bootlin.com/linux/v5.16-rc2/source/drivers/net/dsa/hirschmann/hellcreek.c#L1050
https://elixir.bootlin.com/linux/v5.16-rc2/source/include/linux/dsa/sja1105.h#L21
So this is the approach taken here as well. The difference here being
that we prepare and destroy the traps per port, dynamically at runtime,
as opposed to driver init time, because apparently, PTP-unaware
forwarding is a use case.
Fixes:
4e3b0468e6d7 ("net: mscc: PTP Hardware Clock (PHC) support")
Reported-by: Po Liu <po.liu@nxp.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean [Fri, 26 Nov 2021 17:28:43 +0000 (19:28 +0200)]
net: ptp: add a definition for the UDP port for IEEE 1588 general messages
As opposed to event messages (Sync, PdelayReq etc) which require
timestamping, general messages (Announce, FollowUp etc) do not.
In PTP they are part of different streams of data.
IEEE 1588-2008 Annex D.2 "UDP port numbers" states that the UDP
destination port assigned by IANA is 319 for event messages, and 320 for
general messages. Yet the kernel seems to be missing the definition for
general messages. This patch adds it.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean [Fri, 26 Nov 2021 17:28:42 +0000 (19:28 +0200)]
net: mscc: ocelot: create a function that replaces an existing VCAP filter
VCAP (Versatile Content Aware Processor) is the TCAM-based engine behind
tc flower offload on ocelot, among other things. The ingress port mask
on which VCAP rules match is present as a bit field in the actual key of
the rule. This means that it is possible for a rule to be shared among
multiple source ports. When the rule is added one by one on each desired
port, that the ingress port mask of the key must be edited and rewritten
to hardware.
But the API in ocelot_vcap.c does not allow for this. For one thing,
ocelot_vcap_filter_add() and ocelot_vcap_filter_del() are not symmetric,
because ocelot_vcap_filter_add() works with a preallocated and
prepopulated filter and programs it to hardware, and
ocelot_vcap_filter_del() does both the job of removing the specified
filter from hardware, as well as kfreeing it. That is to say, the only
option of editing a filter in place, which is to delete it, modify the
structure and add it back, does not work because it results in
use-after-free.
This patch introduces ocelot_vcap_filter_replace, which trivially
reprograms a VCAP entry to hardware, at the exact same index at which it
existed before, without modifying any list or allocating any memory.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean [Fri, 26 Nov 2021 17:28:41 +0000 (19:28 +0200)]
net: mscc: ocelot: don't downgrade timestamping RX filters in SIOCSHWTSTAMP
The ocelot driver, when asked to timestamp all receiving packets, 1588
v1 or NTP, says "nah, here's 1588 v2 for you".
According to this discussion:
https://patchwork.kernel.org/project/netdevbpf/patch/
20211104133204.19757-8-martin.kaistra@linutronix.de/#
24577647
drivers that downgrade from a wider request to a narrower response (or
even a response where the intersection with the request is empty) are
buggy, and should return -ERANGE instead. This patch fixes that.
Fixes:
4e3b0468e6d7 ("net: mscc: PTP Hardware Clock (PHC) support")
Suggested-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Fri, 26 Nov 2021 19:36:31 +0000 (11:36 -0800)]
Merge branch 'net-hns3-add-some-fixes-for-net'
Guangbin Huang says:
====================
net: hns3: add some fixes for -net
This series adds some fixes for the HNS3 ethernet driver.
====================
Link: https://lore.kernel.org/r/20211126120318.33921-1-huangguangbin2@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jie Wang [Fri, 26 Nov 2021 12:03:18 +0000 (20:03 +0800)]
net: hns3: fix incorrect components info of ethtool --reset command
Currently, HNS3 driver doesn't clear the reset flags of components after
successfully executing reset, it causes userspace info of
"Components reset" and "Components not reset" is incorrect.
So fix this problem by clear corresponding reset flag after reset process.
Fixes:
ddccc5e368a3 ("net: hns3: add support for triggering reset by ethtool")
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Hao Chen [Fri, 26 Nov 2021 12:03:17 +0000 (20:03 +0800)]
net: hns3: fix one incorrect value of page pool info when queried by debugfs
Currently, when user queries page pool info by debugfs command
"cat page_pool_info", the cnt of allocated page for page pool may be
incorrect because of memory inconsistency problem caused by compiler
optimization.
So this patch uses READ_ONCE() to read value of pages_state_hold_cnt to
fix this problem.
Fixes:
850bfb912a6d ("net: hns3: debugfs add support dumping page pool info")
Signed-off-by: Hao Chen <chenhao288@hisilicon.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Hao Chen [Fri, 26 Nov 2021 12:03:16 +0000 (20:03 +0800)]
net: hns3: add check NULL address for page pool
When page pool is not enabled, its address value is still NULL and page
pool should not be accessed, so add a check for it.
Fixes:
850bfb912a6d ("net: hns3: debugfs add support dumping page pool info")
Signed-off-by: Hao Chen <chenhao288@hisilicon.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Guangbin Huang [Fri, 26 Nov 2021 12:03:15 +0000 (20:03 +0800)]
net: hns3: fix VF RSS failed problem after PF enable multi-TCs
When PF is set to multi-TCs and configured mapping relationship between
priorities and TCs, the hardware will active these settings for this PF
and its VFs.
In this case when VF just uses one TC and its rx packets contain priority,
and if the priority is not mapped to TC0, as other TCs of VF is not valid,
hardware always put this kind of packets to the queue 0. It cause this kind
of packets of VF can not be used RSS function.
To fix this problem, set tc mode of all unused TCs of VF to the setting of
TC0, then rx packet with priority which map to unused TC will be direct to
TC0.
Fixes:
e2cb1dec9779 ("net: hns3: Add HNS3 VF HCL(Hardware Compatibility Layer) Support")
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
zhangyue [Thu, 25 Nov 2021 11:36:10 +0000 (19:36 +0800)]
net: qed: fix the array may be out of bound
If the variable 'p_bit->flags' is always 0,
the loop condition is always 0.
The variable 'j' may be greater than or equal to 32.
At this time, the array 'p_aeu->bits[32]' may be out
of bound.
Signed-off-by: zhangyue <zhangyue1@kylinos.cn>
Link: https://lore.kernel.org/r/20211125113610.273841-1-zhangyue1@kylinos.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Linus Torvalds [Fri, 26 Nov 2021 19:24:32 +0000 (11:24 -0800)]
Merge tag 'for-5.16-rc2-tag' of git://git./linux/kernel/git/kdave/linux
Pull btrfs fix from David Sterba:
"One more fix to the lzo code, a missing put_page causing memory leaks
when some error branches are taken"
* tag 'for-5.16-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix the memory leak caused in lzo_compress_pages()
Tony Lu [Fri, 26 Nov 2021 02:41:35 +0000 (10:41 +0800)]
net/smc: Don't call clcsock shutdown twice when smc shutdown
When applications call shutdown() with SHUT_RDWR in userspace,
smc_close_active() calls kernel_sock_shutdown(), and it is called
twice in smc_shutdown().
This fixes this by checking sk_state before do clcsock shutdown, and
avoids missing the application's call of smc_shutdown().
Link: https://lore.kernel.org/linux-s390/1f67548e-cbf6-0dce-82b5-10288a4583bd@linux.ibm.com/
Fixes:
606a63c9783a ("net/smc: Ensure the active closing peer first closes clcsock")
Signed-off-by: Tony Lu <tonylu@linux.alibaba.com>
Reviewed-by: Wen Gu <guwen@linux.alibaba.com>
Acked-by: Karsten Graul <kgraul@linux.ibm.com>
Link: https://lore.kernel.org/r/20211126024134.45693-1-tonylu@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
wengjianfeng [Fri, 26 Nov 2021 01:31:30 +0000 (09:31 +0800)]
nfc: fdp: Merge the same judgment
Combine two judgments that return the same value
Signed-off-by: wengjianfeng <wengjianfeng@yulong.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20211126013130.27112-1-samirweng1979@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ziyang Xuan [Fri, 26 Nov 2021 01:59:42 +0000 (09:59 +0800)]
net: vlan: fix underflow for the real_dev refcnt
Inject error before dev_hold(real_dev) in register_vlan_dev(),
and execute the following testcase:
ip link add dev dummy1 type dummy
ip link add name dummy1.100 link dummy1 type vlan id 100
ip link del dev dummy1
When the dummy netdevice is removed, we will get a WARNING as following:
=======================================================================
refcount_t: decrement hit 0; leaking memory.
WARNING: CPU: 2 PID: 0 at lib/refcount.c:31 refcount_warn_saturate+0xbf/0x1e0
and an endless loop of:
=======================================================================
unregister_netdevice: waiting for dummy1 to become free. Usage count = -
1073741824
That is because dev_put(real_dev) in vlan_dev_free() be called without
dev_hold(real_dev) in register_vlan_dev(). It makes the refcnt of real_dev
underflow.
Move the dev_hold(real_dev) to vlan_dev_init() which is the call-back of
ndo_init(). That makes dev_hold() and dev_put() for vlan's real_dev
symmetrical.
Fixes:
563bcbae3ba2 ("net: vlan: fix a UAF in vlan_dev_real_dev()")
Reported-by: Petr Machata <petrm@nvidia.com>
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Link: https://lore.kernel.org/r/20211126015942.2918542-1-william.xuanziyang@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Fri, 26 Nov 2021 03:19:21 +0000 (19:19 -0800)]
ptp: fix filter names in the documentation
All the filter names are missing _PTP in them.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Link: https://lore.kernel.org/r/20211126031921.2466944-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Julian Wiedmann [Fri, 26 Nov 2021 17:55:43 +0000 (18:55 +0100)]
ethtool: ioctl: fix potential NULL deref in ethtool_set_coalesce()
ethtool_set_coalesce() now uses both the .get_coalesce() and
.set_coalesce() callbacks. But the check for their availability is
buggy, so changing the coalesce settings on a device where the driver
provides only _one_ of the callbacks results in a NULL pointer
dereference instead of an -EOPNOTSUPP.
Fix the condition so that the availability of both callbacks is
ensured. This also matches the netlink code.
Note that reproducing this requires some effort - it only affects the
legacy ioctl path, and needs a specific combination of driver options:
- have .get_coalesce() and .coalesce_supported but no
.set_coalesce(), or
- have .set_coalesce() but no .get_coalesce(). Here eg. ethtool doesn't
cause the crash as it first attempts to call ethtool_get_coalesce()
and bails out on error.
Fixes:
f3ccfda19319 ("ethtool: extend coalesce setting uAPI with CQE mode")
Cc: Yufeng Mo <moyufeng@huawei.com>
Cc: Huazhong Tan <tanhuazhong@huawei.com>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Link: https://lore.kernel.org/r/20211126175543.28000-1-jwi@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Thadeu Lima de Souza Cascardo [Thu, 25 Nov 2021 14:14:57 +0000 (11:14 -0300)]
nfc: virtual_ncidev: change default device permissions
Device permissions is S_IALLUGO, with many unnecessary bits. Remove them
and also remove read and write permissions from group and others.
Before the change:
crwsrwsrwt 1 0 0 10, 125 Nov 25 13:59 /dev/virtual_nci
After the change:
crw------- 1 0 0 10, 125 Nov 25 14:05 /dev/virtual_nci
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Bongsu Jeon <bongsu.jeon@samsung.com>
Link: https://lore.kernel.org/r/20211125141457.716921-1-cascardo@canonical.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Davide Caratti [Wed, 24 Nov 2021 16:14:40 +0000 (17:14 +0100)]
net/sched: sch_ets: don't peek at classes beyond 'nbands'
when the number of DRR classes decreases, the round-robin active list can
contain elements that have already been freed in ets_qdisc_change(). As a
consequence, it's possible to see a NULL dereference crash, caused by the
attempt to call cl->qdisc->ops->peek(cl->qdisc) when cl->qdisc is NULL:
BUG: kernel NULL pointer dereference, address:
0000000000000018
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: 0000 [#1] PREEMPT SMP NOPTI
CPU: 1 PID: 910 Comm: mausezahn Not tainted 5.16.0-rc1+ #475
Hardware name: Red Hat KVM, BIOS 1.11.1-4.module+el8.1.0+4066+
0f1aadab 04/01/2014
RIP: 0010:ets_qdisc_dequeue+0x129/0x2c0 [sch_ets]
Code: c5 01 41 39 ad e4 02 00 00 0f 87 18 ff ff ff 49 8b 85 c0 02 00 00 49 39 c4 0f 84 ba 00 00 00 49 8b ad c0 02 00 00 48 8b 7d 10 <48> 8b 47 18 48 8b 40 38 0f ae e8 ff d0 48 89 c3 48 85 c0 0f 84 9d
RSP: 0000:
ffffbb36c0b5fdd8 EFLAGS:
00010287
RAX:
ffff956678efed30 RBX:
0000000000000000 RCX:
0000000000000000
RDX:
0000000000000002 RSI:
ffffffff9b938dc9 RDI:
0000000000000000
RBP:
ffff956678efed30 R08:
e2f3207fe360129c R09:
0000000000000000
R10:
0000000000000001 R11:
0000000000000001 R12:
ffff956678efeac0
R13:
ffff956678efe800 R14:
ffff956611545000 R15:
ffff95667ac8f100
FS:
00007f2aa9120740(0000) GS:
ffff95667b800000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
0000000000000018 CR3:
000000011070c000 CR4:
0000000000350ee0
Call Trace:
<TASK>
qdisc_peek_dequeued+0x29/0x70 [sch_ets]
tbf_dequeue+0x22/0x260 [sch_tbf]
__qdisc_run+0x7f/0x630
net_tx_action+0x290/0x4c0
__do_softirq+0xee/0x4f8
irq_exit_rcu+0xf4/0x130
sysvec_apic_timer_interrupt+0x52/0xc0
asm_sysvec_apic_timer_interrupt+0x12/0x20
RIP: 0033:0x7f2aa7fc9ad4
Code: b9 ff ff 48 8b 54 24 18 48 83 c4 08 48 89 ee 48 89 df 5b 5d e9 ed fc ff ff 0f 1f 00 66 2e 0f 1f 84 00 00 00 00 00 f3 0f 1e fa <53> 48 83 ec 10 48 8b 05 10 64 33 00 48 8b 00 48 85 c0 0f 85 84 00
RSP: 002b:
00007ffe5d33fab8 EFLAGS:
00000202
RAX:
0000000000000002 RBX:
0000561f72c31460 RCX:
0000561f72c31720
RDX:
0000000000000002 RSI:
0000561f72c31722 RDI:
0000561f72c31720
RBP:
000000000000002a R08:
00007ffe5d33fa40 R09:
0000000000000014
R10:
0000000000000000 R11:
0000000000000246 R12:
0000561f7187e380
R13:
0000000000000000 R14:
0000000000000000 R15:
0000561f72c31460
</TASK>
Modules linked in: sch_ets sch_tbf dummy rfkill iTCO_wdt intel_rapl_msr iTCO_vendor_support intel_rapl_common joydev virtio_balloon lpc_ich i2c_i801 i2c_smbus pcspkr ip_tables xfs libcrc32c crct10dif_pclmul crc32_pclmul crc32c_intel ahci libahci ghash_clmulni_intel serio_raw libata virtio_blk virtio_console virtio_net net_failover failover sunrpc dm_mirror dm_region_hash dm_log dm_mod
CR2:
0000000000000018
Ensuring that 'alist' was never zeroed [1] was not sufficient, we need to
remove from the active list those elements that are no more SP nor DRR.
[1] https://lore.kernel.org/netdev/
60d274838bf09777f0371253416e8af71360bc08.
1633609148.git.dcaratti@redhat.com/
v3: fix race between ets_qdisc_change() and ets_qdisc_dequeue() delisting
DRR classes beyond 'nbands' in ets_qdisc_change() with the qdisc lock
acquired, thanks to Cong Wang.
v2: when a NULL qdisc is found in the DRR active list, try to dequeue skb
from the next list item.
Reported-by: Hangbin Liu <liuhangbin@gmail.com>
Fixes:
dcc68b4d8084 ("net: sch_ets: Add a new Qdisc")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Link: https://lore.kernel.org/r/7a5c496eed2d62241620bdbb83eb03fb9d571c99.1637762721.git.dcaratti@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Rafael J. Wysocki [Fri, 26 Nov 2021 18:45:31 +0000 (19:45 +0100)]
Merge branch 'acpi-properties'
Merge fix and cleanup related to the management of ACPI device
properties for 5.16-rc3.
* acpi-properties:
ACPI: Make acpi_node_get_parent() local
ACPI: Get acpi_device's parent from the parent field
Rafael J. Wysocki [Fri, 26 Nov 2021 18:44:40 +0000 (19:44 +0100)]
Merge branch 'pm-sleep'
Merge hibernation-related fixes for 5.16-rc3.
* pm-sleep:
PM: hibernate: Fix snapshot partial write lengths
PM: hibernate: use correct mode for swsusp_close()
Yannick Vignon [Wed, 24 Nov 2021 15:47:31 +0000 (16:47 +0100)]
net: stmmac: Disable Tx queues when reconfiguring the interface
The Tx queues were not disabled in situations where the driver needed to
stop the interface to apply a new configuration. This could result in a
kernel panic when doing any of the 3 following actions:
* reconfiguring the number of queues (ethtool -L)
* reconfiguring the size of the ring buffers (ethtool -G)
* installing/removing an XDP program (ip l set dev ethX xdp)
Prevent the panic by making sure netif_tx_disable is called when stopping
an interface.
Without this patch, the following kernel panic can be observed when doing
any of the actions above:
Unable to handle kernel paging request at virtual address
ffff80001238d040
[....]
Call trace:
dwmac4_set_addr+0x8/0x10
dev_hard_start_xmit+0xe4/0x1ac
sch_direct_xmit+0xe8/0x39c
__dev_queue_xmit+0x3ec/0xaf0
dev_queue_xmit+0x14/0x20
[...]
[ end trace
0000000000000002 ]---
Fixes:
5fabb01207a2d ("net: stmmac: Add initial XDP support")
Fixes:
aa042f60e4961 ("net: stmmac: Add support to Ethtool get/set ring parameters")
Fixes:
0366f7e06a6be ("net: stmmac: add ethtool support for get/set channels")
Signed-off-by: Yannick Vignon <yannick.vignon@nxp.com>
Link: https://lore.kernel.org/r/20211124154731.1676949-1-yannick.vignon@oss.nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Linus Torvalds [Fri, 26 Nov 2021 18:33:17 +0000 (10:33 -0800)]
Merge tag 'char-misc-5.16-rc3' of git://git./linux/kernel/git/gregkh/char-misc
Pull char/misc driver fix from Greg KH:
"Here is a single binder driver fix for 5.16-rc3.
It resolves a problem reported in the set of binder fixes that went
into 5.16-rc1. It has been in linux-next for a while with no reported
problems"
* tag 'char-misc-5.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
binder: fix test regression due to sender_euid change
Linus Torvalds [Fri, 26 Nov 2021 18:27:43 +0000 (10:27 -0800)]
Merge tag 'staging-5.16-rc3' of git://git./linux/kernel/git/gregkh/staging
Pull staging fixes from Greg KH:
"Here are some small staging driver fixes and one driver removal for
5.16-rc3.
The fixes resolve a number of small issues found in 5.16-rc1, nothing
huge at all. The driver removal was due to a platform being removed in
5.16-rc1, but this driver was forgotten about. It wasn't being built
anymore so it's safe to delete.
All have been in linux-next for a while with no reported problems"
* tag 'staging-5.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: rtl8192e: Fix use after free in _rtl92e_pci_disconnect()
staging: greybus: Add missing rwsem around snd_ctl_remove() calls
staging: Remove Netlogic XLP network driver
staging: r8188eu: fix a memory leak in rtw_wx_read32()
staging: r8188eu: use GFP_ATOMIC under spinlock
staging: r8188eu: Use kzalloc() with GFP_ATOMIC in atomic context
staging/fbtft: Fix backlight
staging: r8188eu: Fix breakage introduced when 5G code was removed
Linus Torvalds [Fri, 26 Nov 2021 18:22:47 +0000 (10:22 -0800)]
Merge tag 'usb-5.16-rc1' of git://git./linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are a number of small USB fixes for reported problems for
5.16-rc3
They include:
- typec driver fixes
- new usb-serial driver ids
- usb hub enumeration issues that were much reported
- gadget driver fixes
- dwc3 driver fix
- chipidea driver fixe
All of these have been in linux-next with no reported problems"
* tag 'usb-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
USB: serial: option: add Fibocom FM101-GL variants
usb: typec: tipd: Fix initialization sequence for cd321x
usb: typec: tipd: Fix typo in cd321x_switch_power_state
usb: hub: Fix locking issues with address0_mutex
USB: serial: pl2303: fix GC type detection
USB: serial: option: add Telit LE910S1 0x9200 composition
usb: chipidea: ci_hdrc_imx: fix potential error pointer dereference in probe
usb: hub: Fix usb enumeration issue due to address0 race
usb: typec: fusb302: Fix masking of comparator and bc_lvl interrupts
usb: dwc3: leave default DMA for PCI devices
usb: dwc2: hcd_queue: Fix use of floating point literal
usb: dwc3: gadget: Fix null pointer exception
usb: gadget: udc-xilinx: Fix an error handling path in 'xudc_probe()'
usb: xhci: tegra: Check padctrl interrupt presence in device tree
usb: dwc2: gadget: Fix ISOC flow for elapsed frames
usb: dwc3: gadget: Check for L1/L2/U3 for Start Transfer
usb: dwc3: gadget: Ignore NoStream after End Transfer
usb: dwc3: core: Revise GHWPARAMS9 offset
Linus Torvalds [Fri, 26 Nov 2021 18:10:19 +0000 (10:10 -0800)]
Merge tag 'mmc-v5.16-rc1' of git://git./linux/kernel/git/ulfh/mmc
Pull MMC host fixes from Ulf Hansson:
- mmc_spi: Add SPI IDs to silence warning
- sdhci: Fix ADMA for PAGE_SIZE >= 64KiB
- sdhci-esdhc-imx: Disable broken CMDQ for imx8qm/imx8qxp/imx8mm
* tag 'mmc-v5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: spi: Add device-tree SPI IDs
mmc: sdhci: Fix ADMA for PAGE_SIZE >= 64KiB
mmc: sdhci-esdhc-imx: disable CMDQ support
Linus Torvalds [Fri, 26 Nov 2021 17:59:55 +0000 (09:59 -0800)]
Merge branch 'i2c/for-current' of git://git./linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"I2C has an interrupt storm fix for the i801, better timeout handling
for the new virtio driver, and some documentation fixes this time"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
docs: i2c: smbus-protocol: mention the repeated start condition
i2c: virtio: disable timeout handling
i2c: i801: Fix interrupt storm from SMB_ALERT signal
i2c: i801: Restore INTREN on unload
dt-bindings: i2c: imx-lpi2c: Fix i.MX 8QM compatible matching
Linus Torvalds [Fri, 26 Nov 2021 17:54:13 +0000 (09:54 -0800)]
Merge tag 'for-linus-5.16c-rc3-tag' of git://git./linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
- Kconfig fix to make it possible to control building of the privcmd
driver
- three fixes for issues identified by the kernel test robot
- a five-patch series to simplify timeout handling for Xen PV driver
initialization
- two patches to fix error paths in xenstore/xenbus driver
initialization
* tag 'for-linus-5.16c-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen: make HYPERVISOR_set_debugreg() always_inline
xen: make HYPERVISOR_get_debugreg() always_inline
xen: detect uninitialized xenbus in xenbus_init
xen: flag xen_snd_front to be not essential for system boot
xen: flag pvcalls-front to be not essential for system boot
xen: flag hvc_xen to be not essential for system boot
xen: flag xen_drm_front to be not essential for system boot
xen: add "not_essential" flag to struct xenbus_driver
xen/pvh: add missing prototype to header
xen: don't continue xenstore initialization in case of errors
xen/privcmd: make option visible in Kconfig
Linus Torvalds [Fri, 26 Nov 2021 17:30:24 +0000 (09:30 -0800)]
Merge tag 'arm64-fixes' of git://git./linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"Three arm64 fixes.
The main one is a fix to the way in which we evaluate the macro
arguments to our uaccess routines, which we _think_ might be the root
cause behind some unkillable tasks we've seen in the Android arm64 CI
farm (testing is ongoing). In any case, it's worth fixing.
Other than that, we've toned down an over-zealous VM_BUG_ON() and
fixed ftrace stack unwinding in a bunch of cases.
Summary:
- Evaluate uaccess macro arguments outside of the critical section
- Tighten up VM_BUG_ON() in pmd_populate_kernel() to avoid false positive
- Fix ftrace stack unwinding using HAVE_FUNCTION_GRAPH_RET_ADDR_PTR"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: uaccess: avoid blocking within critical sections
arm64: mm: Fix VM_BUG_ON(mm != &init_mm) for trans_pgd
arm64: ftrace: use HAVE_FUNCTION_GRAPH_RET_ADDR_PTR
Qu Wenruo [Sat, 20 Nov 2021 08:34:11 +0000 (16:34 +0800)]
btrfs: fix the memory leak caused in lzo_compress_pages()
[BUG]
Fstests generic/027 is pretty easy to trigger a slow but steady memory
leak if run with "-o compress=lzo" mount option.
Normally one single run of generic/027 is enough to eat up at least 4G ram.
[CAUSE]
In commit
d4088803f511 ("btrfs: subpage: make lzo_compress_pages()
compatible") we changed how @page_in is released.
But that refactoring makes @page_in only released after all pages being
compressed.
This leaves error path not releasing @page_in. And by "error path"
things like incompressible data will also be treated as an error
(-E2BIG).
Thus it can cause a memory leak if even nothing wrong happened.
[FIX]
Add check under @out label to release @page_in when needed, so when we
hit any error, the input page is properly released.
Reported-by: Josef Bacik <josef@toxicpanda.com>
Fixes:
d4088803f511 ("btrfs: subpage: make lzo_compress_pages() compatible")
Reviewed-and-tested-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Jakub Kicinski [Fri, 26 Nov 2021 05:03:33 +0000 (21:03 -0800)]
Merge branch 'net-small-csum-optimizations'
Eric Dumazet says:
====================
net: small csum optimizations
After recent x86 csum_partial() optimizations, we can more easily
see in kernel profiles costs of add/adc operations that could
be avoided, by feeding a non zero third argument to csum_partial()
====================
Link: https://lore.kernel.org/r/20211124202446.2917972-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eric Dumazet [Wed, 24 Nov 2021 20:24:46 +0000 (12:24 -0800)]
net: optimize skb_postpull_rcsum()
Remove one pair of add/adc instructions and their dependency
against carry flag.
We can leverage third argument to csum_partial():
X = csum_block_sub(X, csum_partial(start, len, 0), 0);
-->
X = csum_block_add(X, ~csum_partial(start, len, 0), 0);
-->
X = ~csum_partial(start, len, ~X);
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eric Dumazet [Wed, 24 Nov 2021 20:24:45 +0000 (12:24 -0800)]
gro: optimize skb_gro_postpull_rcsum()
We can leverage third argument to csum_partial():
X = csum_sub(X, csum_partial(start, len, 0));
-->
X = csum_add(X, ~csum_partial(start, len, 0));
-->
X = ~csum_partial(start, len, ~X);
This removes one add/adc pair and its dependency against the carry flag.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Xin Long [Wed, 24 Nov 2021 19:26:14 +0000 (14:26 -0500)]
sctp: make the raise timer more simple and accurate
Currently, the probe timer is reused as the raise timer when PLPMTUD is in
the Search Complete state. raise_count was introduced to count how many
times the probe timer has timed out. When raise_count reaches to 30, the
raise timer handler will be triggered.
During the whole processing above, the timer keeps timing out every probe_
interval. It is a waste for the Search Complete state, as the raise timer
only needs to time out after 30 * probe_interval.
Since the raise timer and probe timer are never used at the same time, it
is no need to keep probe timer 'alive' in the Search Complete state. This
patch to introduce sctp_transport_reset_raise_timer() to start the timer
as the raise timer when entering the Search Complete state. When entering
the other states, sctp_transport_reset_probe_timer() will still be called
to reset the timer to the probe timer.
raise_count can be removed from sctp_transport as no need to count probe
timer timeout for raise timer timeout. last_rtx_chunks can be removed as
sctp_transport_reset_probe_timer() can be called in the place where asoc
rtx_data_chunks is changed.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Link: https://lore.kernel.org/r/edb0e48988ea85997488478b705b11ddc1ba724a.1637781974.git.lucien.xin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
projects / platform / kernel / linux-rpi.git / log