bitbake: toaster: use deploy_dir var to obtain the license.manifest path

[YOCTO #6051]
(Bitbake rev: 6dd8133b06bbda5cce50de39123f429a6a3f772d)

Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

bitbake: toaster: Display task description

Display task description as content of help bubble for a task.

[YOCTO #5748]

(Bitbake rev: 4ffc380d11cff4e1d32d2bf5fb6c7cda6f7e22e6)

Signed-off-by: Ravi Chintakunta <ravi.chintakunta@timesys.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

bitbake: toaster: fix timezone detection

This patch replaces faulty timezone detection with a version
that simply reads the TZ environment variable if it is set.

If the TZ is not set, we do a reverse match search among known
timezone definitions and take the first match.

    [YOCTO #5499]

(Bitbake rev: 3a0a556a65368f02635606e4eb707ca08e25007a)

Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

bitbake: toaster: update saving sstate task data

This is an update on the sstate file saving data.
It saves both found and missed sstate tasks.

(Bitbake rev: 60c577b1080219b795d3c8ab4e149e929cf9ce14)

Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

bitbake: runqueue: Address issues with incomplete sstate sets

The first part of the sstate code checks en-mass whether given checksums
are available. The next part of the code then either triggers those
setscene tasks either running them or skipping them if they've been
covered by others.

The problems was that this second part would always skip a task if it
was unavailable in the first part, even if it would have otherwise been
covered by other tasks.

This mean the mere presence of an artefact (or lack of presence) could
cause a different build failure.

The issue reproduces if you run a build and populate an sstate feed, then
run a second build off that feed, then run a third build off the sstate
feed of the second build (which is reduced in size).

The fix is rather than immediately skipping tasks if the checksum is
unavailable, create a list of missing tasks, then, if that task cannot
be covered by others we can skip it later. The deferral makes the
behaviour the same even when the cache is "incomplete".

[YOCTO #6081]

(Bitbake rev: 5edb1a3e3f454ba6e65551174d86229db2f99636)

Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

bitbake: runqueue: Fix sstate task dependency problems

If a setscene task has [depends], its possible they may still get executed out
of order. The issue is that the dependencies are set to set() for all tasks
involved. This patch adds back in explict dependencies within these chains
to avoid the setscene task failures.

[YOCTO #6069]

(Bitbake rev: 724c889eed3b03d3199810c185086d3973af826c)

Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

Drop beagleboard, replaced by beaglebone

(From meta-yocto rev: b125761e5e31fc506f7b5b87308850cd573ab1b6)

Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

poky: add edgerouter information to README.hardware

Adding the summary, preparation and boot information for the newly introduced
edgerouter BSP.

(From meta-yocto rev: cc8c7a3c94d2cafe899adc7f8199237d4a72f205)

Signed-off-by: Yang Wei <Wei.Yang@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

linux-libc-headers: remove 3.10 recipe

3.14 is now the reference for libc-headers. After building and booting 3.x based
BSPs against the 3.14 headers, we can safely remove the old version and patches
that are now part of the mainline kernel.

(From OE-Core rev: ade26bc63fdf89f297bec5f67bfff108e90438fc)

Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

libc-headers: set TC default to 3.14

(From OE-Core rev: acd025cbeef533137522e60dd2cc5a6a4300d1b5)

Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

linux-libc-headers: add 3.14 libc headers

Introduce the 3.14 linux-libc-headers recipe, now that the 3.14 kernel is
available, and the default for the qemu reference BSPs.

The three patches which were required for the previous 3.10 libc-headers
are not required for 3.14 and can be ignored.

(From OE-Core rev: 6b25918ecce6d555632d9576e16ad443b5d1780a)

Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

linux-libc-headers: make compression format configurable

As of the 3.13 kernel bz2 compressed tarballs are not available. To support
older header tarballs, and newer ones that require the 'xz' compressed
bundles, we can break out a variable that allows versioned libc headers to
select the archive format that works.

(From OE-Core rev: 116228fceca7fc2a7b557133b1f8f28f41af1ee5)

Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

linux-yocto/3.14: introduce versioned recipes

The release kernel for Yocto 1.6 is the 3.14 kernel, so we introduce
the versioned recipes here.

(From OE-Core rev: 92776093766d4b0bb2613214274fa28dc59b6126)

Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

Revert "zisofs-tools-native: Add missing dependency on zlib-native"

This reverts commit c581059df88d5801cc20ab24a096e4a67b737d49.

The same thing was already applied at a slightly different place in the file.

Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

lib/oeqa: add a test target controller for EFI targets

The purpose of this module is to deploy a test image on a EFI-enabled hardware
and run our runtime tests. A bit of background:
 - testimage.bbclass uses the concept of TEST_TARGET which is a class name
that is responsible for target deploying. A layer can provide
it's own TEST_TARGET. Right now has OE-core has a QemuTarget and a SimpleRemoteTarget
(ssh into an already up and running machine and run tests), the default one being qemu.
 - basically testimage does something like:
    target.deploy()
    try:
target.start()
        runTests()
    finally:
target.stop()

This module assumes a running EFI machine with gummiboot as bootloader and
core-image-testmaster installed (or similar). Also your hardware under test has
to be in a DHCP-enabled network that gives it the same IP for each reboot.

One time setup (master image):
 - build core-image-testmaster with EFI_PROVIDER = "gummiboot"
 - install the image on the target

Test image setup:
 - build your test image, e.g core-image-sato as you usually do, but with these in local.conf:
    IMAGE_FSTYPES += "tar.gz"
 - Now run the tests:
    INHERIT += "testimage"
    TEST_TARGET = "GummibootTarget"
    TEST_TARGET_IP = "192.168.2.3"
    bitbake core-image-sato -c testimage

Other notes:
 - TEST_POWERCONTROL_CMD (togheter with TEST_POWERCONTROL_EXTRA_ARGS) can be a command that runs on the host and does power cycling.
The test code passes one argument to that command: off, on or cycle (off then on). In my case I use something like
TEST_POWERCONTROL_CMD="powercontrol.exp test 10.11.12.1 nuc1" in local.conf.
Basically my expect script does: 'ssh test@10.11.12.1 "pyctl nuc1 <arg>" and runs a python script there that controls power for a label called nuc1'.
The reason why my expect script has to ssh into another machine is because of network topology, and that machine is the one actually connected
to the test rack and the power strip. That's why TEST_POWERCONTROL_CMD and _ARGS need to be customized for one's setup, the only requirement being
that it accepts: on/off/cycle as the last argument.
 - if no command is defined it would use classic reboot. This is fine as long as the machine
actually reboots (as in the ssh test hasn't failed), but it's useful for "simple-setup-with-one-board-on-the-desk" scenario, where
some manual interaction is okay from time to time.

[YOCTO #5614]

(From OE-Core rev: e00f888a88d0851b088c232dec66418e575a2e90)

Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

recipes-extended: add master image for testing purposes

Add a custom recipe with custom initramfs and installers, that makes
it easy to deploy a master image for testing purposes.
We need a master image running on the target hardware, that should be a
known good build, with a set of utilities installed so that we use it
to deploy the images under test.

This core-image-testmaster recipe isn't a requirement per se, any image can
be used as long as the required conditions are met.
The test code assumes:
 - that the device has a second rootfs labeled as testrootfs
 - it has a properly configured bootloader entry (called test) for the second kernel and rootfs
 - the master image has a /etc/masterimage file so it can differentiate between master
and test images
 - the master image has tar, mount, bash (basically the normal linux utilities not the busybox
ones)

[YOCTO #5614]

(From OE-Core rev: dea237ccd9407288cd3a73e1deca270619dd6d4a)

Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

initrdscripts: add install scripts with a second rootfs

These are meant to be used by a master image, for a simple
initial setup.
The install scripts are similar to the default ones, but:
- custom partitioning, replaces the swap partiton with a second root filesystem
- adds labels to the partitions
- preconfigures a boot loader entry for the second rootfs

Part of [YOCTO #5614]

(From OE-Core rev: 39fcab00cd3b85d40966689e31b4c7748f630739)

Signed-off-by: Stefan Stanacar <stefanx.stanacar@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

openssh: build without libbsd

We do not DEPEND on libbsd, so we do not want to
build with it just because libutil.h is found by configure.
As noted in the patch, specifying --disable-libutil to
configure does not work, so we provide "cached" configure
variables.

(From OE-Core rev: 103ef2295c728e427acc27bb071e786946c459f2)

Signed-off-by: Joe Slater <jslater@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

classes/sanity: check if SDKMACHINE setting has taken effect

If you try to set SDKMACHINE in a distro configuration file, it won't
take effect because by the time that is parsed the line in bitbake.conf
which includes the appropriate conf file for SDKMACHINE has already been
parsed. Check that SDK_ARCH has changed from its default value and show
an error if it hasn't in order to catch this misconfiguration.

Fixes [YOCTO #5861].

(From OE-Core rev: 25ba4042ae782016aaf1cb5d3dac09b2a1030a1e)

Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

pseudo-1.5.1: keep install command directory mode

When install command sets the created directory mode, pseudo will change
the mode of the directory to 0700 incorrectly. Backport patch to fix it.

(From OE-Core rev: af595b09d570cbd320e4e138651144ac96bfbb83)

Signed-off-by: yanjun.zhu <yanjun.zhu@windriver.com>
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

libomxil-0.9.3: fix configure unrecognised option

Drop --disable-ffmpegcomponents which is deprecated since libomxil-bellagio-0.9.1
Explicitly disable doc generation to prevent using doxygen from build machine.

Components are external and are available separately here:
http://sourceforge.net/projects/omxil/files/components/

(From OE-Core rev: ff321fec0c5611b69a99901cac74bfd76b409d77)

Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

toaster.bbclass: the license.manifest is located in DEPLOY_DIR

Replaced DEPLOY_DIR_IMAGE with DEPLOY_DIR

[YOCTO #6051]
(From OE-Core rev: 64c0ea3adccfc8af911b5e25e4c64a0abc578e6c)

Signed-off-by: Cristiana Voicu <cristiana.voicu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

sstate.bbclass: update missed sstate event

This is a patch to update the missed sstate event with
info about the sstate files locations that were found.
It's needed as to display the found file in the toaster ui.

Also fixes a bug where a setscene task may have appeared in the
missed list even if it was found in a sstate mirror.

(From OE-Core rev: ad66cd521d3e661dd57c5aa02c204585101984f3)

Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

packagegroup-core-tools-testapps: Move GLTOOLS to X11GLTOOLS

piglit and mesa-demos are not buildable in x11-less distros so we must
to add those only when opengl and x11 DISTRO_FEATURES are available.

(From OE-Core rev: ab0bb02d410e4f0713e75192eb217991b3f672aa)

Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

linux-yocto/3.10: fix qemuarm build failure

The v3.10.24 merge created a merge conflict, which was not properly
resolved. Fixing the merge conflict and fixing the build of qemu arm.

(From OE-Core rev: 2116e326d9d7039aac4ec6c7ae5d2a2bedfb4a74)

Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

sstatesig: Anchor inherits class tests

There was a nasty sstate hash corruption issue occurring where the
fact the testimage bbclass was inherited meant that the checksum
changed due to testimage.bbclass being confused with image.bbclass.

This patch anchors the bbclass names to avoid this confusion.

(From OE-Core rev: 943a75a4f3b6877e4092dae14b59b7afef8cad3d)

Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

bitbake: user-manual-execution.xml: Added how BB processes curly braces.

(Bitbake rev: f4ebc4de63d64e3b5f87e1d0f51507760c3d82d7)

Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

bitbake: user-manual-execution.xml: Updated "Checksum (Signatures) section.

Fixes [YOCTO #5357]

Added a paragraph at the end of this section to address the fact
that the user can now debug Bitbake's processing of signatures.
This introduces the -S bitbake option and the fact that the
user can provide a couple parameters with it: "none" and
"printdiff".

(Bitbake rev: 4093fa6c96eebe0bbafb93dc27d8a978cca436c4)

Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

bitbake: user-manual-intro.xml: updated bitbake -h output

The new -S syntax is in there now.

(Bitbake rev: 5a406a69c14b6ddf179fea2c4bc68cddf9eddeea)

Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

xkeyboard-config: Add missing dependency on libxslt-native for xsltproc

(From OE-Core rev: 3366da30f32653ce0dc28878029df81c5ca9bcc5)

Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

bitbake: server/xmlrpc: Simlify featureset handling

Rather than passing featureset around various places where the data doesn't
really belong, run a command at connection time to set the appropriate
features. This is similar to what the process server does.

(Bitbake rev: c3b5cc5691291c74dd315c4439c80e0e4b2b5c1d)

Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

bitbake: bin/bitbake: Only try and process an event_queue if it exists

The connection may have failed before the event queue has been setup.
Handle this correctly in the exception handler.

(Bitbake rev: db4d80b5c2d32117cdf06333b9627202998b1512)

Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

bitbake: bitbake: toaster: do not trap SIGCHLD

We remove trapping SIGCHLD due to a weird interaction
with the bash version used with Ubuntu 14.04 LTS.

(Bitbake rev: 59f2f33440449c586c23dd3a192698a37aaf0595)

Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

bitbake: prserv: Fix exit race issues

We shouldn't immediately remove the pid file when stopping the server, if we do, this
causes a traceback within the server itself which can then hang. Fix this by removing
the stale pid file as the last thing we do.

Also:

* don't printing a new "waiting" line every 0.5 seconds.
* make the loop more granular since the user can 'feel' the 0.5 seconds

[YOCTO #5984]

(Bitbake rev: 81f41a806aeddcc38992163557672e296bcbc967)

Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

bitbake: bin/bitbake/cooker: Ensure initial featureset is optimal

If the featureset didn't match the defaults, we'd pay the price of two
base configuration parses which showed up adversely in the performance
benchmarks. This also passes the feature set into the cooker creation so
in the common case we don't have to reset the server. This speeds up
both knotty and hob startup. If the featureset doesn't match, the system
will reset as before, this just streamlines the common case.

(Bitbake rev: 1249543c4dbf3edeac033d888497864cfc807a4e)

Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

bitbake: cooker: Only change self.data if it exists

With the change to more optimal default featureset behaviour, a race was
exposed by hob where the code may try and change self.data before it
exists. This change avoids that.

When the datastore is created, the cooker configuration is used so
data tracking is correctly handled regardless.

(Bitbake rev: 9d8f7efbc39d64124936ccaeb3c47a112e595d78)

Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

zisofs-tools-native: Add missing dependency on zlib-native

(From OE-Core rev: c581059df88d5801cc20ab24a096e4a67b737d49)

Signed-off-by: Drew Moseley <drew_moseley@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

e2fsprogs: Add e2fsprogs-mke2fs and e2fsprogs-e2fsck as recommend packages

The mke2fs and e2fsck commands are regular tools of e2fsprogs, so they
should be installed.

(From OE-Core rev: a2b6610dceb0c27484d3958d84d7f491aa759a04)

Signed-off-by: Yue Tao <Yue.Tao@windriver.com>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Jeff Polk <jeff.polk@windriver.com>
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

lttng-ust: add python to lttng-ust's RDEPENDS

| Note: adding Smart RPM DB channel
|
| Note: to be installed:  run-postinsts@x86_64 kernel-modules@qemux86_64 packagegroup-core-boot@qemux86_64 lttng-ust@x86_64
| Loading cache...
| Updating cache...               ######################################## [100%]
|
| Computing transaction...error: Can't install lttng-ust-2:2.3.0-r0.0@x86_64: no package provides /usr/bin/python
|
| Saving cache...
|
| WARNING: exit code 1 from a shell command.
| ERROR: Function failed: do_rootfs (log file is located at tmp/work/qemux86_64-wrs-linux/wrlinux-image-glibc-small/1.0-r1/temp/do_rootfs/log.do_rootfs.13619)

(From OE-Core rev: 0360a49f0c216b3f35c4bffabab3406c31589fd3)

Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

libpcap: add PACKAGECONFIG for libnl1

Add --with-libnl autoconfig parameter and dependency
between libpcap and libnl1.

Disable libnl1 by default to avoid libpcap build error
when libnl1 is involved.

(From OE-Core rev: 52f16a5a56868137e17cf52fa7b664047ec7bcaf)

Signed-off-by: Hu Yadi <Yadi.hu@windriver.com>
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

syslinux.bbclass: Enable additional kernel parameters for syslinux

Add additional parameter 'SYSLINUX_KERNEL_ARGS' in order to allow
for specific kernel parameters to be set when using syslinux.

The extra kernel parameters are added to btype[1] and then written out
as part of the APPEND field.

(From OE-Core rev: d78c4d51ed266c14b0425f6abf553392c6ebe408)

Signed-off-by: Konrad Scherer <Konrad.Scherer@windriver.com>
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

weston : refactor to identify EGL, cairoglesv2 support

(From OE-Core rev: faa86f0cda47f3ea6eeaf4c3fd3cf95a286f4571)

Signed-off-by: Prabhu Sundararaj <prabhu.sundararaj@freescale.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

sstate-cache-management: rm_by_stamps - discover all suffixes like remove_duplicated does

* instead of hard coding list of sstate enabled task use
  the same function as remove_duplicated to find them in
  sstate-cache directory

(From OE-Core rev: dfdb397db5865c3287cd9ccb5ea9a336eb77ca90)

Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

sstate-cache-management: skip populate_lic archives when removing duplicates

* there are 2 issues

* all *gcc* recipes produce "duplicate" files and we cannot keep just the newest one:
  OE qemux86@ ~/build/oe-core $ find sstate-cache/ | grep gcc.*populate_lic
  sstate-cache/cd/sstate:gcc::4.8.2:r0::3:cd8d1a33b832662b624f5e4bd9f55154_populate_lic.tgz
  sstate-cache/cd/sstate:gcc::4.8.2:r0::3:cd8d1a33b832662b624f5e4bd9f55154_populate_lic.tgz.siginfo
  sstate-cache/d5/sstate:gcc::4.8.2:r0::3:d591af812395cc386e017fa2c8fa0722_populate_lic.tgz
  sstate-cache/d5/sstate:gcc::4.8.2:r0::3:d591af812395cc386e017fa2c8fa0722_populate_lic.tgz.siginfo
  sstate-cache/f7/sstate:gcc::4.8.2:r0::3:f74cfd4982fd7c349a5418f07297f955_populate_lic.tgz
  sstate-cache/f7/sstate:gcc::4.8.2:r0::3:f74cfd4982fd7c349a5418f07297f955_populate_lic.tgz.siginfo
  sstate-cache/74/sstate:gcc::4.8.2:r0::3:7489e4502cb446506b9829cda13c7630_populate_lic.tgz
  sstate-cache/74/sstate:gcc::4.8.2:r0::3:7489e4502cb446506b9829cda13c7630_populate_lic.tgz.siginfo

  OE qemux86@ ~/build/oe-core $ find tmp-eglibc/stamps/ | grep gcc.*populate_lic
  tmp-eglibc/stamps/i586-oe-linux/gcc-cross-initial/4.8.2-r0.do_populate_lic_setscene.cd8d1a33b832662b624f5e4bd9f55154
  tmp-eglibc/stamps/i586-oe-linux/libgcc/4.8.2-r0.do_populate_lic_setscene.f74cfd4982fd7c349a5418f07297f955
  tmp-eglibc/stamps/i586-oe-linux/gcc-cross/4.8.2-r0.do_populate_lic_setscene.d591af812395cc386e017fa2c8fa0722
  tmp-eglibc/stamps/i586-oe-linux/gcc-runtime/4.8.2-r0.do_populate_lic_setscene.7489e4502cb446506b9829cda13c7630

* the same for target and native versions of the same recipe:
  OE qemux86@ ~/build/oe-core $ find tmp-eglibc/stamps/ | grep opkg-utils.*populate_lic
  tmp-eglibc/stamps/x86_64-linux/opkg-utils-native/0.1.8+gitAUTOINC+c33b217016-r0.do_populate_lic_setscene.dd21a3c5444482ce90be4c9a33d806f1
  tmp-eglibc/stamps/i586-oe-linux/opkg-utils/0.1.8+gitAUTOINC+c33b217016-r0.do_populate_lic_setscene.8571422f9e311dc41bb6b21e71a09bc0

  OE qemux86@ ~/build/oe-core $ find sstate-cache/ | grep opkg-utils.*populate_lic
  sstate-cache/dd/sstate:opkg-utils::0.1.8+gitAUTOINC+c33b217016:r0::3:dd21a3c5444482ce90be4c9a33d806f1_populate_lic.tgz.siginfo
  sstate-cache/dd/sstate:opkg-utils::0.1.8+gitAUTOINC+c33b217016:r0::3:dd21a3c5444482ce90be4c9a33d806f1_populate_lic.tgz
  sstate-cache/85/sstate:opkg-utils::0.1.8+gitAUTOINC+c33b217016:r0::3:8571422f9e311dc41bb6b21e71a09bc0_populate_lic.tgz.siginfo
  sstate-cache/85/sstate:opkg-utils::0.1.8+gitAUTOINC+c33b217016:r0::3:8571422f9e311dc41bb6b21e71a09bc0_populate_lic.tgz

* similar problem for .siginfo file of do_patch:
  OE qemux86@ ~/build/oe-core $ find sstate-cache/ | grep eglibc.*patch
  sstate-cache/99/sstate:eglibc::2.19:r0::3:99b7e1d688e4c6c659b458c9c57611df_patch.tgz.siginfo
  sstate-cache/11/sstate:eglibc::2.19:r0::3:11401ddd208a753fee17696b14dc1e52_patch.tgz.siginfo

  OE qemux86@ ~/build/oe-core $ find tmp-eglibc/stamps/  | grep /eglibc.*patch
  tmp-eglibc/stamps/i586-oe-linux/eglibc-initial/2.19-r0.do_patch.sigdata.99b7e1d688e4c6c659b458c9c57611df
  tmp-eglibc/stamps/i586-oe-linux/eglibc/2.19-r0.do_patch.sigdata.11401ddd208a753fee17696b14dc1e52

* maybe these should have ideally identical signatures, but before it's fixed lets
  just skip removing them

(From OE-Core rev: 9ae16469e70714acf7cb1e6c5238934a6b20d58a)

Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

sstate-cache-management: rm_by_stamps - remove .siginfo and .done files

* it's possible that corresponding .tgz files were already removed
  (e.g. with -d option and older version of this script) and this
  won't find orphaned .siginfo or .done files to remove
* add sort -u to count files found multiple times only once

(From OE-Core rev: 5a58cd2474ed96d6f58576203bedf8211d309c99)

Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

sstate-cache-management: rm_by_stamps - include signatures of .sigdata. files

* there are .siginfo files in sstate-cache, but STAMPS_DIR calls them
  .sigdata, make sure that such signatures are kept, because some tasks
  like do_package, don't have _setscene or main task entry and are
  removed:

  stamps:
  tmp-eglibc/stamps/i586-oe-linux/busybox/1.22.1-r0.do_package.sigdata.cd6f625471ef1b20a9379e90519db6f1
  tmp-eglibc/stamps/i586-oe-linux/busybox/1.22.1-r0.do_package_write_ipk.f20fe66285219f23373fc64d5de1d412
  tmp-eglibc/stamps/i586-oe-linux/busybox/1.22.1-r0.do_package_write_ipk.sigdata.f20fe66285219f23373fc64d5de1d412
  tmp-eglibc/stamps/i586-oe-linux/busybox/1.22.1-r0.do_packagedata.sigdata.c55a3dbe90010c15aa3294753fbd402e
  tmp-eglibc/stamps/i586-oe-linux/busybox/1.22.1-r0.do_packagedata_setscene.c55a3dbe90010c15aa3294753fbd402e.qemux86
  sstate (we want to keep all in this case):
  sstate-cache/c5/sstate:busybox:i586-oe-linux:1.22.1:r0:i586:3:c55a3dbe90010c15aa3294753fbd402e_packagedata.tgz
  sstate-cache/c5/sstate:busybox:i586-oe-linux:1.22.1:r0:i586:3:c55a3dbe90010c15aa3294753fbd402e_packagedata.tgz.siginfo
  sstate-cache/cd/sstate:busybox:i586-oe-linux:1.22.1:r0:i586:3:cd6f625471ef1b20a9379e90519db6f1_package.tgz
  sstate-cache/cd/sstate:busybox:i586-oe-linux:1.22.1:r0:i586:3:cd6f625471ef1b20a9379e90519db6f1_package.tgz.siginfo
  sstate-cache/f2/sstate:busybox:i586-oe-linux:1.22.1:r0:i586:3:f20fe66285219f23373fc64d5de1d412_package_write_ipk.tgz
  sstate-cache/f2/sstate:busybox:i586-oe-linux:1.22.1:r0:i586:3:f20fe66285219f23373fc64d5de1d412_package_write_ipk.tgz.siginfo

(From OE-Core rev: c2e5c0b6bdc432449ad1792176aa28667c3d34b9)

Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

wic: Extend --rootfs-dir to connect rootfs-dirs

The wic command-line param --rootfs-dir gets generalized to support
multiple directories. Each '--rootfs-dir' could be connected using a
special string, that should be present in .wks. I.e:

wic create ... --rootfs-dir rootfs1=/some/rootfs/dir \
  --rootfs-dir rootfs2=/some/other/rootfs/dir

  part / --source rootfs --rootfs-dir="rootfs1" --ondisk sda --fstype=ext3 \
    --label primary --align 1024

  part /standby --source rootfs --rootfs-dir="rootfs2" \
    --ondisk sda --fstype=ext3 --label secondary --align 1024

The user could use harded-code directory instead of connectors. Like this:

  wic create ... hard-coded-path.wks -r /some/rootfs/dir

  part / --source rootfs --ondisk sda --fstype=ext3 --label primary --align 1024

  part /standby --source rootfs --rootfs-dir=/some/rootfs/dir \
    --ondisk sda --fstype=ext3 --label secondary --align 1024

(From OE-Core rev: 719d093c40e4c259a4c97d6c8a5efb5aeef5fd38)

Signed-off-by: João Henrique Ferreira de Freitas <joaohf@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

wic: Report all ROOTFS_DIR artifacts

When a .wks has more than one ROOTFS_DIR it's better to report
all ROOTFS_DIR that was used to create the image.

(From OE-Core rev: a8762f3be215678a6806cabe49647083f42323a8)

Signed-off-by: João Henrique Ferreira de Freitas <joaohf@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

wic: Add option --rootfs-dir to --source

The '--rootfs-dir' option is optional and only takes efect is a
partition is set up like this:

  part /standby --source rootfs --rootfs-dir=<special rootfs> ...

So '--rootfs-dir' is used instead of bitbake ROOTFS_DIR variable or
'-r' param.

(From OE-Core rev: d486db593e6643bd10b8fe90257d547a9f341043)

Signed-off-by: João Henrique Ferreira de Freitas <joaohf@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

wic: Use partition label to be part of rootfs filename

When a partition from .wks file is set up like this:

  part /standby --source rootfs --rootfs-dir=<special rootfs> ... --label \
    --label secondary

This means that 'rootfs' must use '<special rootfs>' as rootfs and
the default partition filename in /var/tmp/wic/build/ will be create
using the '--label' as part of the name. E.g:

  /var/tmp/wic/build/rootfs_secondary.ext3

(From OE-Core rev: c7efb3a21618ce3069811042279a0d898237ac0f)

Signed-off-by: João Henrique Ferreira de Freitas <joaohf@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

wic: Add rootfs_dir argument to do_prepare_partition() method

The do_prepare_partition() method from RootfsPlugin class need
to know what will be the rootfs_dir. This makes sense when .wks
file has a partition set up like this:

  part /standby --source rootfs --rootfs-dir=<special rootfs> ...

then do_prepare_partition() will work with the correct rootfs.

(From OE-Core rev: 6042b097a8fc24f2b85eb9848fb007a3c6c090a9)

Signed-off-by: João Henrique Ferreira de Freitas <joaohf@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

wic: Hook up RootfsPlugin plugin

Remove the 'rootfs' case when internal call code is used and
replace to call the general-purpose plugin.

For now RootfsPluing class continues to invoke prepare_rootfs()
method from Wic_PartData. However RootfsPlugin could implement them.

(From OE-Core rev: 26cd93b79318cbfaebb971d1e728041904e015f1)

Signed-off-by: João Henrique Ferreira de Freitas <joaohf@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

wic: Add RootfsPlugin

Implement RootfsPlugin class. The do_prepare_partition() method
is implemented using code in Wic_PartData class.

This class have 'rootfs' name, which is the name that should
be used in the --source parameters of the .wks partition commands.

(From OE-Core rev: 68dd66849bbaca6e3a0cf00beec0dba1c08e9070)

Signed-off-by: João Henrique Ferreira de Freitas <joaohf@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

packagegroup-core-lsb: Limit mips64 issues to qt4 packages only

The COMPATIBLE_HOST setting was only there for mips64 issues. Move that
restriction to the qt4 packages themselves so the rest of the lsb images can
be built.

(From OE-Core rev: ef7968dbded62cfce91e4f44bc96e8d04b076f15)

Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

libcap 2.22: fix, disable gperf detection

gperf straight invoke is not suitable for cross environment (gperf-native should be used instead).
Formal patch has been submited to the upstream.
As libcap 2.24 is currently available, I prefer doing this quick fix.

(From OE-Core rev: 5c7946f790b5e8da8f30e3493c04c07b30b89d17)

Signed-off-by: Matthieu Crapet <Matthieu.Crapet@ingenico.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

wic: Fix bitbake_env_command for 'None' case

bitbake_env_command will choke if it isn't given an image, make sure
it does the right thing in that case.

(From OE-Core rev: a17f879cd5bc7401597ccee908801f8e3efa34c0)

Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

packagegroup-toolset-native: remove it

Remove it since it seems that it is not widely used by oe.

(From OE-Core rev: a56ad23ecf3fbb6d3085a856622e2c5f0018934b)

Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

core-image-sato-sdk: Drop qt4 on mips64

qt4 doesn't build on mips64 so don't include it in sato-sdk images.

(From OE-Core rev: 900584946698b5bb2c459ad9555709665843be2c)

Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

make-3.81: Fix build failures with newer makeinfo

(From OE-Core rev: f81925316323b662f9b4d368976f4205fb96dc67)

Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

linux-yocto/3.8: remove versioned recipes

Yocto 1.6 will support the LTSI 3.4/3.10 kernels and the 3.14 kernel. As
such, we remove the 3.8 linux-yocto recipes to keep our number of supported
kernels at three.

(From OE-Core rev: 940137ed36e1274bcb4e6b246b69c8c9172cabf7)

Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

linux-yocto/3.10: fix drm build failure

Andrea Adami reported the following build failure:

    .../drm/drm_mm.h:105:2: error: implicit declaration of function
    'BUG_ON' [-Werror=implicit-function-declaration]
    |   BUG_ON(!hole_node->hole_follows);
    |   ^
    |   CC      drivers/pci/setup-res.o
    |   CC      drivers/gpu/drm/i915/i915_drv.o
    | cc1: some warnings being treated as errors
    | make[6]: *** [drivers/gpu/drm/ttm/ttm_agp_backend.o] Error 1
    | make[5]: *** [drivers/gpu/drm/ttm] Error 2

Cherry picking mainline commit 86e81f0e6 [drm/mm: include required headers in drm_mm.h]
fixes the build problems.

cc: Andrea Adami <andrea.adami@gmail.com>
(From OE-Core rev: 42c0eba4fac6b8bd28b58ec04574d04b0ab0c457)

Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

linux-yocto/3.10: update intel common meta data

Bumping the meta branch SRCREV for the following two commits:

  df3aa753c882 intel-common: Add media-all to the standard builds
  4b0d57269dae intel-common: Add mohonpeak BSP

(From OE-Core rev: 821b1c03db3793609e3ae564358de10e23591604)

Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

linux-yocto/3.10: update to v3.10.34

Updating to the latest korg -stable release.

(From OE-Core rev: 4d636396435f1165481cb103512026a8660ca8b2)

Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

linux-yocto/3.10: add valleyisland io

Updating the 3.10 meta SRCREV to include the valleyisland IO .scc and
configuration files.

(From OE-Core rev: 5adccadee00ac4408d3b3d4e6a0b7ee7c84cba97)

Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

linux-yocto/3.10: update to v3.10.33

Updating to the latest -stable release.

(From OE-Core rev: 9acc956c23ea161d0af691ff4685b472d3eff086)

Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

linux-yocto/3.10: update EFI configuration

Importing the following two meta data changes for EFI configuration:

  284e9589436a meta: efi.cfg/efi-ext.cfg: add EFIVAR_FS to default efi fragment
  0a8c4971e2d9 meta: update efi config fragment to include EFI_STUB by default

(From OE-Core rev: ec6ff275ba44ec183c00910f47e5b8916e58ab14)

Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

linux-yocto/3.4: update mohonpeak.cfg for SATA, SMBus, LPC, WDT, crypto & highmem64g

Updating the meta SRCREV with the latest configuration updates.

(From OE-Core rev: 8e98af96a4b2b725724cd97276168c03e95aa99d)

Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

linux-yocto/3.10: intel-core*/common configuration updates

Importing the following configuration changes to support the latest intel
common BSPs:

  6e0e756d5137 intel-common: Remove GMA500 support
  226c3b7a2b82 intel-core*: Add baytrail soc support
  25df7acf2cc4 baytrail: Add feature/soc/baytrail
  8715856ab617 meta: input: add CONFIG_INPUT dependency

(From OE-Core rev: 88d2bb9c5959a9b1e744bb517c26a322cd537023)

Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

image.py: check file exists before deleting

When RM_OLD_IMAGE = "1", we delete old images but we didn't check they
actually exist...

[YOCTO #6029]

(From OE-Core rev: 8910d3cc94899ab4d509e681b438ae96218fa777)

Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

package_*.bbclass: Simplify addtask

The package_write task was previously removed. Remove a remaining superfluous
reference to it.

(From OE-Core rev: 76bbf9e8f07f3e6f20c890dd4c82c72641e2ca88)

Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

populate_sdk_*: Drop now unneeded recrdeptask flags

Now populate_sdk_base has the appropriate flags, we can drop these from the individual
classes.

(From OE-Core rev: 388bfe2dc168d31ba3c5c85684f3c96d2ae13800)

Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

populate_sdk_base: add dependency of do_package_write_* tasks

nativesdk packages were created only for the first backend listed in
PACKAGE_CLASSES. Hence, if one had it set to "package_rpm package_ipk"
and did a 'bitbake -c populate_sdk core-image-something', the nativesdk
packages were created only for rpm.

This is particularily bad for adt-installer which is based on opkg
repos.

Credits go to richard.purdie@linuxfoundation.org who suggested me this
fix.

[YOCTO #5900]

(From OE-Core rev: 85c3238ee713bc27e99a2e393e3bf8438ed4d91f)

Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

rootfs.py: add new cleanup method

This commit adds a new _cleanup() internal method that will be called at
the end of rootfs creation, so that each backend can delete various
files that were probably generated during rootfs postprocess execution,
etc.

[YOCTO #6049]

(From OE-Core rev: 6151d69875f3f4f097b6e2fdef2a0f3ab391e2fd)

Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

package_manager.py: leave the __db.00* files in place

Do not delete the __db.00* files in the PackageManager class. Leave this
operation up to the client classes. One side effect of this deletion was
the following message appearing in the output of the next rpm command
executed:

rpmdb: BDB1540 configured environment flags incompatible with existing
environment

We might also gain some time here by not deleting/creating those files
very often.

[YOCTO #6049]

(From OE-Core rev: 12e300f0af2a27c15d80298d3fbb27b092c35154)

Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

nss-3.15.1: fix CVE-2013-5605

Mozilla Network Security Services (NSS) 3.14 before 3.14.5 and
3.15 before 3.15.3 allows remote attackers to cause a denial
of service or possibly have unspecified other impact via
invalid handshake packets.

http://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2013-5605
(From OE-Core rev: 09e8cd6f09284ad3faf0bc05d623a43e2b174866)

Signed-off-by: yanjun.zhu <yanjun.zhu@windriver.com>
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

nss-3.15.1: fix CVE-2013-1741

Integer overflow in Mozilla Network Security Services (NSS)
3.15 before 3.15.3 allows remote attackers to cause a denial
of service or possibly have unspecified other impact via a
large size value.

http://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2013-1741
(From OE-Core rev: b666d173ff0ba213bf81e2c035a605a28e5395ea)

Signed-off-by: yanjun.zhu <yanjun.zhu@windriver.com>
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

libtiff: fix CVE-2013-4244

cve description:
The LZW decompressor in the gif2tiff tool in libtiff 4.0.3 and earlier
allows context-dependent attackers to cause a denial of service
(out-of-bounds write and crash) or possibly execute arbitrary code via
a crafted GIF image.

http://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2013-4244
(From OE-Core rev: 4eec8fae3f972a27bfb986066f5b3603599ebc25)

Signed-off-by: Baogen Shang <baogen.shang@windriver.com>
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

libarchive: fix CVE-2013-0211

CVE description:
Integer signedness error in the archive_write_zip_data function in
archive_write_set_format_zip.c in libarchive 3.1.2 and earlier, when running
on 64-bit machines, allows context-dependent attackers to cause a denial of
service (crash) via unspecified vectors, which triggers an improper conversion
between unsigned and signed types, leading to a buffer overflow.

http://web.nvd.nist.gov/view/vuln/detail?vulnId=CVE-2013-0211
(From OE-Core rev: 355a8086637b859a469e1f2dc717b4ccec00b970)

Signed-off-by: Baogen Shang <baogen.shang@windriver.com>
Signed-off-by: Jeff Polk <jeff.polk@windriver.com>
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

autoconf: new autotest/testsuite option to enable automake test result format

lib/autotest/general.m4: added "--am-fmt | -A" command line parameter
for testsuite script to enable "RESULT: testname" output format; to be
used by yocto ptest packages directly or with autoconf TESTSUITEFLAGS.

(From OE-Core rev: 9d288e5afd6696cc519574470c7d47ca55403d27)

Signed-off-by: Radu Patriu <radu.patriu@enea.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

bitbake: toaster: filter tasks with cache attempts for all attempts

Adjust the filter for task cache attempts to include all attempts except
SSTATE_NA.

[YOCTO #5923]

(Bitbake rev: b1f52a87e367b8dea9bd974bc5a886d84d839c45)

Signed-off-by: David Reyna <David.Reyna@windriver.com>
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

bitbake: toaster: fix dirinfo empty dir expansion

[YOCTO 6036]

In the page that shows the directory layout for an image, if the
directory is empty, then the directory folder icon should be black and
the table row should not be 'expandable' on a mouse click.  That
behavior depends on the directory's child entry count calculated in the
view function controlling that page.

Two images in the database with the same directory path in the target
image, but one with path having entries and the other not having
any entries caused the path without entries to be clickable; the
query for a directory's count of entries, didn't filter on the image id,
only on the path.

(Bitbake rev: 964d2d6efe9a2cfa7cd8760cda4453c3d69b2e27)

Signed-off-by: Dave Lerner <dave.lerner@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

bitbake: toaster: added file types to the Outputs column in the build

The file types are displayed in the Outputs column in the build page. The file types
are derived from the target image filenames.

[YOCTO #5947]

(Bitbake rev: 842abf6759894690d5bc770f4ea2ac15b127e5e2)

Signed-off-by: Farrell Wymore <farrell.wymore@windriver.com>
Signed-off-by: David Reyna <David.Reyna@windriver.com>
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

bitbake: toaster: add support for empty states in pages

Add support for empty states in the top build page,
the all packages page, and the all tasks page.

[YOCTO #4865]

(Bitbake rev: eaff7b50d7102c97b75df185b9ef917970319d59)

Signed-off-by: David Reyna <David.Reyna@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

bitbake: toaster: show installed package name

[YOCTO #5922]

Implement changes that show the installed package name after the
official 'recipe-named' package name.  If the alias exists and
is different than the package name, then the alias is shown as a
'muted' string after the package name in the form 'as some-alias-name'.
This formatting appears in the included package pages in the elements:
* local breadcrumbs at the top of package included pages,
* <h1> title headings along with a help bubble that is not hovering,
and
* package lists where the help bubble appears when the mouse hovers
over the row.

The changes in detail in this patch per file are:
views.py
- added function that tests whether the package object's installed_name
should be shown,
- added function that appends package name with version and revision to
encapsulate package name formatting in one place and referred to as
package.fullpackagespec,
- changed package_built* and package_included* functions to use both
of the above new formatting functions, passing the formatted values to
templates, and
- adhered to django coding styles by renaming  module local
'get_package*' functions with "_" prefix.

package_detail_base.html
- added display of package aliases for included package page,
- refactored to use package.fullpackagespec, formatted by view function,
- added javascript function to format package alias with help, and
- removed trailing whitespace.

package_included_detail.html
- used javascript function above to format package alias, and
- refactored to use package.fullpackagespec.

package_included_dependencies.html
- used javascript function above to format package alias,
- refactored to use package.fullpackagespec,
- forced empty data cells following hover-help to draw borders
by appending space, and
- removed trailing whitespace.

package_included_reverse_dependencies.html
- use javascript function above to format package alias,
- refactor to use views fullpackagespe, and
- force empty data cells following hover-help to draw borders
by appending space.

package_built_detail.html
- refactored to use package.fullpackagespec, and
- removed trailing whitespace.

package_built_dependencies.html
- refactored to use package.fullpackagespec, and
- removed trailing whitespace.

projecttags.py
- removed unused filter to handle installed name
- removed extra spaces around "title = " in format_vpackage_namehelp

(Bitbake rev: c604e14df8cdb1f47535f093d7044955d4c2057d)

Signed-off-by: Dave Lerner <dave.lerner@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

bitbake: toaster: Fix typo in heading code

Fix typo in the code that handles the changes
in the h1 text in order to display the number of results
returned by a search.

[YOCTO #6001]

(Bitbake rev: 65bdd6cf8d0cc2af6cd424de735a5e3f2e54fa99)

Signed-off-by: Belen Barros Pena <belen.barros.pena@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

bitbake: toaster: insure _get_query returns distinct records

The '_get_query' can return duplicate records if a search term appears
multiple times in the same row, so the queryset must be made
distinct before returning.
This commit also removes the initial special case for configvars in
favor of this general solution.

[YOCTO #6012]

(Bitbake rev: d21b64bad8a6a5e23eab552868d555f6e004f4c7)

Signed-off-by: David Reyna <David.Reyna@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

bitbake: toaster: blocks for custom/highlighted navigation and breadcrumb links

Implement the navigation links as blocks so that each page can override and have
its respective link appear highlighted. Make the build breadcrumb a block so that
it is customizable to not be a link for the dashboard page. Reorder the page headers
to be consistent order for extends, projecttags, localbreadcrumb, nav-links.

[YOCTO #5916]
[YOCTO #4258]

(Bitbake rev: cb26c4df04170143babd6c9fd60600bfb31486ed)

Signed-off-by: David Reyna <David.Reyna@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

bitbake: toaster: add Image detail and multiple targets to dashboard

Filled in the Image section detail information and allow for multiple targets.
Each target has a separate section. Added license manifest display. Changed the
target of the license manifest link. Added Tasks failed in the build summary.
The target lists required filters to create sorted lists.

[YOCTO #4258]
[YOCTO #5936]

(Bitbake rev: 09b099903bdf51bfb277b9a8f922255cfe83ab96)

Signed-off-by: Farrell Wymore <farrell.wymore@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

packagegroup-toolset-native: Update after ocf-linux -> cryptodev-linux change

(From OE-Core rev: b16de9af5c7108396a347e7107c73608a2f8d74f)

Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

ocf-linux: remove recipe

ocf-linux only provides header file and no kernel module is built. We
can't use ocf-linux without its implementation. And linux-yocto uses an
alternative project cryptodev-linux, so we remove ocf-linux and use
cryptodev-linux instead.

(From OE-Core rev: 45f1659f49edbceed0b75c0319880151161fdc8e)

Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

openssl: replace dependency ocf-linux with cryptodev-linux

ocf-linux only provides header files but no implementation in kernel.
And Yocto kernel linux-yocto use cryptodev-linux to implement
/dev/crypto interface. So replace dependency ocf-linux with
cryptodev-linux for openssl.

(From OE-Core rev: b36b15cddbe52e6770b96e06af2959cea0e2436f)

Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

cryptodev-linux: add recipe

Yocto kernel linux-yocto uses cryptodev-linux to use device /dev/crypto.
So add cryptodev-linux which is one alternative of ocf-linux and then
remove ocf-linux later.

(From OE-Core rev: 6b6c24eccdb0030ecccadefe94c1c5b4387e46d1)

Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

run-postinsts: fix issue with checking IMAGE_FEATURES

The old implementation was wrong. It was not very generic and it checked
IMAGE_FEATURES while building the recipe, which led to various issues
with the generation of the final script. That is, the run-postinsts
script was generated once, while building the package for the first
time. Hence, any other changes to IMAGE_FEATURES, like removing/adding
'package-management' did not reflect in the final script.

This commit makes run-postinsts script autodetect the backend used for
creating the image, making it generic.

[YOCTO #5666]
[YOCTO #5972]

(From OE-Core rev: 44902f7550e490a9d4d2e2bcdf8c577329b4af75)

Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

build-appliance-image: update to head ae938eba92b2c89a9fd91161e57c5dbc594ad4ad

Build Appliance includes a more recent version
of poky, up to commit:
ae938eba92b2c89a9fd91161e57c5dbc594ad4ad.

Adds bitbake fixes/optimizations;

(From OE-Core rev: f41f1b263438e19e2209876798bbcbbcee646f34)

Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

gummiboot: fix the installed but not shipped warning

Fix the warning:
WARNING: QA Issue: gummiboot: Files/directories were installed but not shipped
  /usr/lib
  /usr/lib/gummiboot
  /usr/lib/gummiboot/gummibootx64.efi

This is because it uses "/usr/lib" in gummibootlibdir, use ${libdir} to
fix it.

(From OE-Core rev: ee587332f2ac9d88d4a300732645b0e2f793ce5f)

Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

gummiboot: use objcopy from the env

Fix the error:
[snip]
| nm -D -u src/efi/gummiboot.so | grep ' U ' && exit 1 || :
| objcopy -j .text -j .sdata -j .data -j .dynamic \
|   -j .dynsym -j .rel -j .rela -j .reloc -j .eh_frame \
|   --target=efi-app-x86_64 src/efi/gummiboot.so gummibootx64.efi
| objcopy: src/efi/gummiboot.so: Invalid bfd target
| make[1]: *** [gummibootx64.efi] Error 1
| make[1]: *** Waiting for unfinished jobs....
| make: *** [all] Error 2
[snip]

It uses the "objcopy" directly, which is not suitable for cross compile.

[YOCTO #6054]

(From OE-Core rev: 393fe40c14e7adeadbccb72953027b63b6f8030c)

Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

gummiboot: add COMPATIBLE_HOST

The gummiboot depends on gnu-efi which had set:

COMPATIBLE_HOST = "(x86_64.*|i.86.*)-linux"

We also need set this for gummiboot, otherwise there would be build
failures for other non-x86 archs.

(From OE-Core rev: f1b23a32d0c823577cec532e3646c2f78e81ccda)

Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

gnu-efi: fix the LIBDIR

Its LIBDIR in Makefile is:

LIBDIR = $(PREFIX)/lib

This is incorrect for 64 bit bsp, thus will cause build failures on gummiboot:

ld: cannot open linker script file /path/to/usr/lib64/elf_x86_64_efi.lds: No such file or directory

[YOCTO #6053]

(From OE-Core rev: a18e4bef5f284c5b940007e60c7be28128a94c44)

Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

bitbake: knotty: Show a link to the logfile for failed setscene tasks

Its not immediately obvious to the user that a logfile exists for a failed setscene
task. Add code to knotty to display where that logfile is in those cases.

[YOCTO #6055]

(Bitbake rev: 0664fa15597785dd90cf205531a9801e6da6ba47)

Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

bitbake: knotty: Split error output onto stderr

When using bitbake -e in scripts, it would be helpful if the error
output appeared on stderr, not stdout. This change enables that building
upon the new bb.msg filters.

[YOCTO #5274]

(Bitbake rev: ebb797fc5c37d729e3cc8b2dc7156287d385c13b)

Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>