fbdev/ps3fb: Build without kernel device

Use fb_info() to print status message at the end of the probe function,
which avoids decoding the devices. fb_info() works with or without an
fbdev kernel device. Fixes the following error:

../drivers/video/fbdev/ps3fb.c: In function 'ps3fb_probe':
../drivers/video/fbdev/ps3fb.c:1172:40: error: 'struct fb_info' has no member named 'dev'
 1172 |                  dev_driver_string(info->dev), dev_name(info->dev),
      |                                        ^~
../include/linux/dev_printk.h:110:37: note: in definition of macro 'dev_printk_index_wrap'
  110 |                 _p_func(dev, fmt, ##__VA_ARGS__);                       \
      |                                     ^~~~~~~~~~~
../drivers/video/fbdev/ps3fb.c:1171:9: note: in expansion of macro 'dev_info'
 1171 |         dev_info(info->device, "%s %s, using %u KiB of video memory\n",
      |         ^~~~~~~~
../drivers/video/fbdev/ps3fb.c:1172:61: error: 'struct fb_info' has no member named 'dev'
 1172 |                  dev_driver_string(info->dev), dev_name(info->dev),
      |                                                             ^~
../include/linux/dev_printk.h:110:37: note: in definition of macro 'dev_printk_index_wrap'
  110 |                 _p_func(dev, fmt, ##__VA_ARGS__);                       \
      |                                     ^~~~~~~~~~~
../drivers/video/fbdev/ps3fb.c:1171:9: note: in expansion of macro 'dev_info'
 1171 |         dev_info(info->device, "%s %s, using %u KiB of video memory\n",
      |         ^~~~~~~~

Reported-by: Randy Dunlap <rdunlap@infradead.org>
Closes: https://lore.kernel.org/lkml/ccc63065-2976-88ef-1211-731330bf2866@infradead.org/
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 701d2054fa31 ("fbdev: Make support for userspace interfaces configurable")
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Helge Deller <deller@gmx.de>
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Bagas Sanjaya <bagasdotme@gmail.com>
Cc: Thorsten Leemhuis <regressions@leemhuis.info>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-fbdev@vger.kernel.org
Cc: linuxppc-dev@lists.ozlabs.org
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Link: https://patchwork.freedesktop.org/patch/msgid/20230731175535.11345-1-tzimmermann@suse.de

drm/doc: document that PRIME import/export is always supported

Since commit 6b85aa68d9d5 ("drm: Enable PRIME import/export for all
drivers"), import/export is always supported. Document this so that
user-space knows what to expect.

Signed-off-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Jeffrey Hugo <quic_jhugo@quicinc.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20230712183156.191445-1-contact@emersion.fr

drm/doc: document drm_event and its types

Convert struct drm_event to a kernel doc comment. Link to the
generic DRM event types. Add a basic description of each event
type.

Signed-off-by: Simon Ser <contact@emersion.fr>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20230717093032.600773-1-contact@emersion.fr

drm/doc: add warning about connector_type_id stability

Mention that the connector_type_id is not stable: it depends on
driver and device probe order.

Signed-off-by: Simon Ser <contact@emersion.fr>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20230717131305.616855-1-contact@emersion.fr

drm/doc: use proper cross-references for sections

When I originally wrote these docs, I couldn't manage to insert a
cross-reference to a section. Here's how it can be done.

Signed-off-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Pekka Paalanen <pekka.paalanen@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230803095734.386761-1-contact@emersion.fr

fbcon: Make fbcon_registered_fb and fbcon_num_registered_fb static

fbcon_registered_fb and fbcon_num_registered_fb is not referred outside
drivers/video/fbdev/core/fbcon.c, so make them static.

Signed-off-by: GUO Zihua <guozihua@huawei.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20230803020939.491-1-guozihua@huawei.com

drm/drm_plane.h: fix grammar of the comment

Signed-off-by: Sui Jingfeng <suijingfeng@loongson.cn>
Link: https://patchwork.freedesktop.org/patch/msgid/20230409131547.494128-1-15330273260@189.cn
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

dt-bindings: display: bridge: tc358867: Add interrupt property

This bridge has an interrupt line for event signaling. Add the
corresponding property.

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230718084411.1189831-1-alexander.stein@ew.tq-group.com

drm: bridge: dw_hdmi: Add cec suspend/resume functions

CEC interrupt status/mask and logical address registers
will be reset when device enter suspend.
It will cause cec fail to work after device resume.
Add CEC suspend/resume functions, reinitialize logical address registers
and restore interrupt status/mask registers after resume.

Signed-off-by: Sandor Yu <Sandor.yu@nxp.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230721124415.1513223-1-Sandor.yu@nxp.com

drm/panel-simple: Add Innolux G156HCE-L01 panel entry

Add support for Innolux G156HCE-L01 15.6" 1920x1080 24bpp
dual-link LVDS TFT panel. Documentation is available at [1].
The middle frequency is tuned slightly upward from 70.93 MHz
to 72 MHz, otherwise the panel shows slight flicker.

[1] https://www.distec.de/fileadmin/pdf/produkte/TFT-Displays/Innolux/G156HCE-L01_Rev.C3_Datasheet.pdf

Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230731210258.256152-2-marex@denx.de

dt-bindings: display: simple: Add Innolux G156HCE-L01 panel

Add entry for Innolux G156HCE-L01 15.6" 1920x1080 24bpp
dual-link LVDS TFT panel. Documentation is available at [1].

[1] https://www.distec.de/fileadmin/pdf/produkte/TFT-Displays/Innolux/G156HCE-L01_Rev.C3_Datasheet.pdf

Signed-off-by: Marek Vasut <marex@denx.de>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230731210258.256152-1-marex@denx.de

drm/panel: Fix todo indentation for panel prepared/enabled cleanup

In commit d2aacaf07395 ("drm/panel: Check for already prepared/enabled
in drm_panel") the formatting for a code block was not quite
right. This caused an error when building htmldocs:

  Documentation/gpu/todo.rst:469: ERROR: Unexpected indentation.

Fix the error by using the proper syntax for a code block.

Fixes: d2aacaf07395 ("drm/panel: Check for already prepared/enabled in drm_panel")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/r/20230802141724.0edce253@canb.auug.org.au
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230802074727.2.Iaeb7b0f7951aee6b8c090364bbc87b1ae198a857@changeid

drm/panel: Fix kernel-doc typo for `follower_lock`

In the kernel doc for the `follower_lock` member of `struct drm_panel`
there was a typo where it was called `followers_lock`. This resulted
in a warning when making "htmldocs":

  ./include/drm/drm_panel.h:270: warning:
  Function parameter or member 'follower_lock' not described in 'drm_panel'

Fix the typo.

Fixes: de0874165b83 ("drm/panel: Add a way for other devices to follow panel state")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/r/20230802142136.0f67b762@canb.auug.org.au
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230802074727.1.I4036706ad5e7f45e80d41b777164258e52079cd8@changeid

accel/qaic: remove redundant pointer pexec

Pointer pexec is being assigned a value however it is never read. The
assignment is redundant and can be removed. Replace sizeof(*pexec)
with sizeof the type and remove the declaration of pointer pexec.

Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230726140626.264952-1-colin.i.king@gmail.com

drm/tiny: panel-mipi-dbi: Allow sharing the D/C GPIO

Displays that are connected to the same SPI bus may share the D/C GPIO.
Use GPIOD_FLAGS_BIT_NONEXCLUSIVE to allow access to the same GPIO for
multiple panel-mipi-dbi instances. Exclusive access to the GPIO during
transfers is ensured by the locking in drm_mipi_dbi.c.

Signed-off-by: Otto Pflüger <otto.pflueger@abscue.de>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230724065654.5269-3-otto.pflueger@abscue.de

drm/mipi-dbi: Lock SPI bus before setting D/C GPIO

Multiple displays may be connected to the same bus and share a D/C GPIO,
so the display driver needs exclusive access to the bus to ensure that
it can control the D/C GPIO safely.

Signed-off-by: Otto Pflüger <otto.pflueger@abscue.de>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: David Lechner <david@lechnology.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230724065654.5269-2-otto.pflueger@abscue.de

drm/bridge: Add debugfs print for bridge chains

DRM bridges are not visible to the userspace and it may not be
immediately clear if the chain is somehow constructed incorrectly. I
have had two separate instances of a bridge driver failing to do a
drm_bridge_attach() call, resulting in the bridge connector not being
part of the chain. In some situations this doesn't seem to cause issues,
but it will if DRM_BRIDGE_ATTACH_NO_CONNECTOR flag is used.

Add a debugfs file to print the bridge chains. For me, on this TI AM62
based platform, I get the following output:

encoder[39]
bridge[0] type: 0, ops: 0x0
bridge[1] type: 0, ops: 0x0, OF: /bus@f0000/i2c@20000000/dsi@e:toshiba,tc358778
bridge[2] type: 0, ops: 0x3, OF: /bus@f0000/i2c@20010000/hdmi@48:lontium,lt8912b
bridge[3] type: 11, ops: 0x7, OF: /hdmi-connector:hdmi-connector

Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230802-drm-bridge-chain-debugfs-v4-1-7e3ae3d137c0@ideasonboard.com

HID: i2c-hid: Do panel follower work on the system_wq

Turning on an i2c-hid device can be a slow process. This is why
i2c-hid devices use PROBE_PREFER_ASYNCHRONOUS. Unfortunately, when
we're a panel follower the i2c-hid power up sequence now blocks the
power on of the panel. Let's fix that by scheduling the work on the
system_wq.

Reviewed-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Benjamin Tissoires <bentiss@kernel.org>
Acked-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230727101636.v4.10.I962bb462ede779005341c49320740ed95810021d@changeid

HID: i2c-hid: Support being a panel follower

As talked about in the patch ("drm/panel: Add a way for other devices
to follow panel state"), we really want to keep the power states of a
touchscreen and the panel it's attached to in sync with each other. In
that spirit, add support to i2c-hid to be a panel follower. This will
let the i2c-hid driver get informed when the panel is powered on and
off. From there we can match the i2c-hid device's power state to that
of the panel.

NOTE: this patch specifically _doesn't_ use pm_runtime to keep track
of / manage the power state of the i2c-hid device, even though my
first instinct said that would be the way to go. Specific problems
with using pm_runtime():
* The initial power up couldn't happen in a runtime resume function
  since it create sub-devices and, apparently, that's not good to do
  in your resume function.
* Managing our power state with pm_runtime meant fighting to make the
  right thing happen at system suspend to prevent the system from
  trying to resume us only to suspend us again. While this might be
  able to be solved, it added complexity.
Overall the code without pm_runtime() ended up being smaller and
easier to understand.

Reviewed-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Benjamin Tissoires <bentiss@kernel.org>
Acked-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230727101636.v4.9.Ib1a98309c455cd7e26b931c69993d4fba33bbe15@changeid

HID: i2c-hid: Suspend i2c-hid devices in remove

In the i2c-hid remove() function we currently try to power off,
depopulate our child device, and free our resources. That's OK, but...

* If the i2c-hid device is on a power rail that can't turn off (either
  an always-on or a shared power rail) we won't try to put the device
  in a low power state during remove(). This probably doesn't matter
  for very many devices but it could be nice in some instances.

* If the i2c-hid device somehow manages to generate an interrupt after
  we tried to power off it is conceivable that the interrupt could
  arrive during or after the call to hid_destroy_device() but before
  the call to free_irq(). That could cause a crash since our IRQ
  handler isn't expecting it. One could imagine this happening in
  the case where we couldn't turn off (see the previous bullet) or,
  possibly, if the interrupt line could glitch shortly after the
  device powered off.

Let's call the suspend code during remove to avoid these issues. That
will put the device into a low power state and also disable
interrupts.

Technically, one could consider this a "fix" of commit 4a200c3b9a40
("HID: i2c-hid: introduce HID over i2c specification implementation").
However, since the above bullet points are more theoretical than
problems seen on real systems and since the remove() of an i2c-hid
touchscreen isn't terribly likely to be called in production, it's
probably not worth the bother of trying to backport it.

Reviewed-by: Benjamin Tissoires <bentiss@kernel.org>
Acked-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230727101636.v4.8.Ic3ecad4a825905f4e4ce2a772b17f3c9cb2d60a2@changeid

HID: i2c-hid: Make suspend and resume into helper functions

In a future patch we'd like to be able to call the current i2c-hid
suspend and resume functions from times other than system
suspend. Move the functions higher up in the file and have them take a
"struct i2c_hid" to make this simpler. We'll then add tiny wrappers of
the functions for use with system suspend.

This change is expected to have no functional effect.

Reviewed-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Benjamin Tissoires <bentiss@kernel.org>
Acked-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230727101636.v4.7.I5c9894789b8b02f029bf266ae9b4f43c7907a173@changeid

HID: i2c-hid: Rearrange probe() to power things up later

In a future patch, we want to change i2c-hid not to necessarily power
up the touchscreen during probe. In preparation for that, rearrange
the probe function so that we put as much stuff _before_ powering up
the device as possible.

This change is expected to have no functional effect.

Reviewed-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Benjamin Tissoires <bentiss@kernel.org>
Acked-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230727101636.v4.6.Ifcc9b0a44895d164788966f9b9511fe094ca8cf9@changeid

HID: i2c-hid: Switch to SYSTEM_SLEEP_PM_OPS()

The SYSTEM_SLEEP_PM_OPS() allows us to get rid of '#ifdef
CONFIG_PM_SLEEP', as talked about in commit 1a3c7bb08826 ("PM: core:
Add new *_PM_OPS macros, deprecate old ones").

This change is expected to have no functional effect.

Reviewed-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Benjamin Tissoires <bentiss@kernel.org>
Acked-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230727101636.v4.5.Ib2a2865bd3c0b068432259dfc7d76cebcbb512be@changeid

of: property: fw_devlink: Add a devlink for panel followers

Inform fw_devlink of the fact that a panel follower (like a
touchscreen) is effectively a consumer of the panel from the purposes
of fw_devlink.

NOTE: this patch isn't required for correctness but instead optimizes
probe order / helps avoid deferrals.

Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230727101636.v4.4.Ibf8e1342b5b7906279db2365aca45e6253857bb3@changeid

drm/panel: Add a way for other devices to follow panel state

These days, it's fairly common to see panels that have touchscreens
attached to them. The panel and the touchscreen can somewhat be
thought of as totally separate devices and, historically, this is how
Linux has treated them. However, treating them as separate isn't
necessarily the best way to model the two devices, it was just that
there was no better way. Specifically, there is little practical
reason to have the touchscreen powered on when the panel is turned
off, but if we model the devices separately we have no way to keep the
two devices' power states in sync with each other.

The issue described above makes it sound as if the problem here is
just about efficiency. We're wasting power keeping the touchscreen
powered up when the screen is off. While that's true, the problem can
go deeper. Specifically, hardware designers see that there's no reason
to have the touchscreen on while the screen is off and then build
hardware assuming that software would never turn the touchscreen on
while the screen is off.

In the very simplest case of hardware designs like this, the
touchscreen and the panel share some power rails. In most cases, this
turns out not to be terrible and is, again, just a little less
efficient. Specifically if we tell Linux that the touchscreen and the
panel are using the same rails then Linux will keep the rails on when
_either_ device is turned on. That ends to work OK-ish, but now if you
turn the panel off not only will the touchscreen remain powered, but
the power rails for the panel itself won't be switched off, burning
extra power.

The above two inefficiencies are _extra_ minor when you consider the
fact that laptops rarely spend much time with the screen off. The main
use case would be when an external screen (and presumably a power
supply) is attached.

Unfortunately, it gets worse from here. On sc7180-trogdor-homestar,
for instance, the display's TCON (timing controller) sometimes crashes
if you don't power cycle it whenever you stop and restart the video
stream (like during a modeset). The touchscreen keeping the power
rails on causes real problems. One proposal in the homestar timeframe
was to move the touchscreen to an always-on rail, dedicating the main
power rail to the panel. That caused _different_ problems as talked
about in commit 557e05fa9fdd ("HID: i2c-hid: goodix: Stop tying the
reset line to the regulator"). The end result of all of this was to
add an extra regulator to the board, increasing cost.

Recently, Cong Yang posted a patch [1] where things are even worse.
The panel and touch controller on that system seem even more
intimately tied together and really can't be thought of separately.

To address this issue, let's start allowing devices to register
themselves as "panel followers". These devices will get called after a
panel has been powered on and before a panel is powered off. This
makes the panel the primary device in charge of the power state, which
matches how userspace uses it.

The panel follower API should be fairly straightforward to use. The
current code assumes that panel followers are using device tree and
have a "panel" property pointing to the panel to follow. More
flexibility and non-DT implementations could be added as needed.

Right now, panel followers can follow the prepare/unprepare functions.
There could be arguments made that, instead, they should follow
enable/disable. I've chosen prepare/unprepare for now since those
functions are guaranteed to power up/power down the panel and it seems
better to start the process earlier.

A bit of explaining about why this is a roll-your-own API instead of
using something more standard:
1. In standard APIs in Linux, parent devices are automatically powered
   on when a child needs power. Applying that here, it would mean that
   we'd force the panel on any time someone was listening to the
   touchscreen. That, unfortunately, would have broken homestar's need
   (if we hadn't changed the hardware, as per above) where the panel
   absolutely needs to be able to power cycle itself. While one could
   argue that homestar is broken hardware and we shouldn't have the
   API do backflips for it, _officially_ the eDP timing guidelines
   agree with homestar's needs and the panel power sequencing diagrams
   show power going off. It's nice to be able to support this.
2. We could, conceibably, try to add a new flag to device_link causing
   the parent to be in charge of power. Then we could at least use
   normal pm_runtime APIs. This sounds great, except that we run into
   problems with initial probe. As talked about in the later patch
   ("HID: i2c-hid: Support being a panel follower") the initial power
   on of a panel follower might need to do things (like add
   sub-devices) that aren't allowed in a runtime_resume function.

The above complexities explain why this API isn't using common
functions. That being said, this patch is very small and
self-contained, so if someone was later able to adapt it to using more
common APIs while solving the above issues then that could happen in
the future.

[1] https://lore.kernel.org/r/20230519032316.3464732-1-yangcong5@huaqin.corp-partner.google.com

Reviewed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230727101636.v4.3.Icd5f96342d2242051c754364f4bee13ef2b986d4@changeid

drm/panel: Check for already prepared/enabled in drm_panel

In a whole pile of panel drivers, we have code to make the
prepare/unprepare/enable/disable callbacks behave as no-ops if they've
already been called. It's silly to have this code duplicated
everywhere. Add it to the core instead so that we can eventually
delete it from all the drivers. Note: to get some idea of the
duplicated code, try:
  git grep 'if.*>prepared' -- drivers/gpu/drm/panel
  git grep 'if.*>enabled' -- drivers/gpu/drm/panel

NOTE: arguably, the right thing to do here is actually to skip this
patch and simply remove all the extra checks from the individual
drivers. Perhaps the checks were needed at some point in time in the
past but maybe they no longer are? Certainly as we continue
transitioning over to "panel_bridge" then we expect there to be much
less variety in how these calls are made. When we're called as part of
the bridge chain, things should be pretty simple. In fact, there was
some discussion in the past about these checks [1], including a
discussion about whether the checks were needed and whether the calls
ought to be refcounted. At the time, I decided not to mess with it
because it felt too risky.

Looking closer at it now, I'm fairly certain that nothing in the
existing codebase is expecting these calls to be refcounted. The only
real question is whether someone is already doing something to ensure
prepare()/unprepare() match and enabled()/disable() match. I would say
that, even if there is something else ensuring that things match,
there's enough complexity that adding an extra bool and an extra
double-check here is a good idea. Let's add a drm_warn() to let people
know that it's considered a minor error to take advantage of
drm_panel's double-checking but we'll still make things work fine.

We'll also add an entry to the official DRM todo list to remove the
now pointless check from the panels after this patch lands and,
eventually, fixup anyone who is triggering the new warning.

[1] https://lore.kernel.org/r/20210416153909.v4.27.I502f2a92ddd36c3d28d014dd75e170c2d405a0a5@changeid

Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230727101636.v4.2.I59b417d4c29151cc2eff053369ec4822b606f375@changeid

dt-bindings: HID: i2c-hid: Add "panel" property to i2c-hid backed touchscreens

As talked about in the patch ("drm/panel: Add a way for other devices
to follow panel state"), touchscreens that are connected to panels are
generally expected to be power sequenced together with the panel
they're attached to. Today, nothing provides information allowing you
to find out that a touchscreen is connected to a panel. Let's add a
phandle for this.

The proerty is added to the generic touchscreen bindings and then
enabled in the bindings for the i2c-hid backed devices. This can and
should be added for other touchscreens in the future, but for now
let's start small.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Benjamin Tissoires <bentiss@kernel.org>
Acked-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230727101636.v4.1.Id68e30343bb1e11470582a9078b086176cfec46b@changeid

drm/panel-edp: Add enable timings for N140HCA-EAC panel

Add timings for InnoLux N140HCA-EAC. This panel is found on some laptops
such as Acer Aspire 1.

Signed-off-by: Nikita Travkin <nikita@trvn.ru>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230801-aspire1-cmn-panel-v1-1-c3d88e389805@trvn.ru

drm/panel: sitronix-st7789v: Check display ID

A very basic debugging rule when a device is connected for the first
time is to access a read-only register which contains known data in
order to ensure the communication protocol is properly working. This
driver lacked any read helper which is often a critical piece for
speeding-up bring-ups.

Add a read helper and use it to verify the communication with the panel
is working as soon as possible in order to inform the user early if this
is not the case.

As this panel may work with no MISO line, the check is discarded in this
case. Upon error, we do not fail probing but just warn the user, in case
the DT description would be lacking the Rx bus width (which is likely on
old descriptions) in order to avoid breaking existing devices.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Sebastian Reichel <sre@kernel.org>
Tested-by: Sebastian Reichel <sre@kernel.org> # no MISO line
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230714013756.1546769-20-sre@kernel.org

drm/panel: sitronix-st7789v: Add EDT ET028013DMA panel support

This panel from Emerging Display Technologies Corporation features an
ST7789V2 LCD controller panel inside which is almost identical to what
the Sitronix panel driver supports.

In practice, the module physical size is specific, and experiments show
that the display will malfunction if any of the following situation
occurs:
* Pixel clock is above 3MHz
* Pixel clock is not inverted
I could not properly identify the reasons behind these failures, scope
captures show valid input signals.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230714013756.1546769-19-sre@kernel.org

drm/panel: sitronix-st7789v: Clarify a definition

The Sitronix datasheet explains BIT(1) of the RGBCTRL register as the
DOTCLK/PCLK edge used to sample the data lines:

    “0” The data is input on the positive edge of DOTCLK
    “1” The data is input on the negative edge of DOTCLK

IOW, this bit implies a falling edge and not a high state. Correct the
definition to ease the comparison with the datasheet.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Sebastian Reichel <sre@kernel.org>
Tested-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230714013756.1546769-18-sre@kernel.org

drm/panel: sitronix-st7789v: Use 9 bits per spi word by default

The Sitronix controller expects 9-bit words, provide this as default at
probe time rather than specifying this in each and every access.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Sebastian Reichel <sre@kernel.org>
Tested-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230714013756.1546769-17-sre@kernel.org

dt-bindings: display: st7789v: bound the number of Rx data lines

The ST7789V LCD controller supports regular SPI wiring, as well as no Rx
data line at all. The operating system needs to know whether it can read
registers from the device or not. Let's detail this specific design
possibility by bounding the spi-rx-bus-width property.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Sebastian Reichel <sre@kernel.org>
Tested-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230714013756.1546769-16-sre@kernel.org

dt-bindings: display: st7789v: Add the edt,et028013dma panel compatible

The ST7789V LCD controller is also embedded in the ET028013DMA
panel. Add a compatible string to describe this other panel.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230714013756.1546769-15-sre@kernel.org

drm/panel: sitronix-st7789v: add Inanbo T28CP45TN89 support

UNI-T UTi260b has a Inanbo T28CP45TN89 v17 panel. I could not find
proper documentation for the panel apart from a technical drawing, but
according to the vendor U-Boot it is based on a Sitronix st7789v chip.
I generated the init sequence by modifying the default one until proper
graphics output has been seen on the device.

Reviewed-by: Michael Riesch <michael.riesch@wolfvision.net>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230714013756.1546769-14-sre@kernel.org

drm/panel: sitronix-st7789v: avoid hardcoding polarity info

Add polarity information via mode and bus flags, so that they are no
longer hardcoded and forward the information to the DRM stack. This is
required for adding panels with different settings.

Reviewed-by: Michael Riesch <michael.riesch@wolfvision.net>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230714013756.1546769-13-sre@kernel.org

drm/panel: sitronix-st7789v: avoid hardcoding invert mode

While the default panel uses invert mode, some panels
require non-invert mode instead.

Reviewed-by: Michael Riesch <michael.riesch@wolfvision.net>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230714013756.1546769-12-sre@kernel.org

drm/panel: sitronix-st7789v: add media bus format

Add support for describing the media bus format in the
panel configuration and expose that to userspace. Since
both supported formats (RGB565 and RGB666) are using 6
bits per color also hardcode that information.

Reviewed-by: Michael Riesch <michael.riesch@wolfvision.net>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230714013756.1546769-11-sre@kernel.org

drm/panel: sitronix-st7789v: avoid hardcoding panel size

Move the panel size information to the mode struct, so
that different panel sizes can be specified depending
on the panel type.

Reviewed-by: Michael Riesch <michael.riesch@wolfvision.net>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230714013756.1546769-10-sre@kernel.org

drm/panel: sitronix-st7789v: avoid hardcoding mode info

Avoid hard-coding the default_mode and supply it from match data. One
additional layer of abstraction has been introduced, which will be
needed for specifying other panel information (e.g. bus flags) in the
next steps.

Reviewed-by: Michael Riesch <michael.riesch@wolfvision.net>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230714013756.1546769-9-sre@kernel.org

drm/panel: sitronix-st7789v: improve error handling

Improve error handling in the probe routine, so that probe
defer errors are captured in /sys/kernel/debug/devices_deferred

Reviewed-by: Michael Riesch <michael.riesch@wolfvision.net>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230714013756.1546769-8-sre@kernel.org

drm/panel: sitronix-st7789v: simplify st7789v_spi_write

st7789v_spi_write initializes a message with just
a single transfer, spi_sync_transfer can be used
for that.

Reviewed-by: Michael Riesch <michael.riesch@wolfvision.net>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230714013756.1546769-7-sre@kernel.org

drm/panel: sitronix-st7789v: make reset GPIO optional

The reset pin might not be software controllable from the SoC,
so make it optional.

Reviewed-by: Michael Riesch <michael.riesch@wolfvision.net>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230714013756.1546769-6-sre@kernel.org

drm/panel: sitronix-st7789v: remove unused constants

ST7789V_COLMOD_RGB_FMT_18BITS and ST7789V_COLMOD_CTRL_FMT_18BITS
are unused in favour of MIPI_DCS_PIXEL_FMT_18BIT, remove them.

Reviewed-by: Michael Riesch <michael.riesch@wolfvision.net>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230714013756.1546769-5-sre@kernel.org

drm/panel: sitronix-st7789v: add SPI ID table

SPI device drivers should also have a SPI ID table.

Reviewed-by: Michael Riesch <michael.riesch@wolfvision.net>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230714013756.1546769-4-sre@kernel.org

dt-bindings: display: st7789v: add Inanbo T28CP45TN89

Add compatible value for Inanbo t28cp45tn89 and make reset GPIO non
mandatory, since it might not be connected to the CPU.

Reviewed-by: Michael Riesch <michael.riesch@wolfvision.net>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230714013756.1546769-3-sre@kernel.org

dt-bindings: vendor-prefixes: add Inanbo

Shenzhen INANBO Electronic Technology Co., Ltd. manufacturers TFT/OLED
LCD panels.

Reviewed-by: Michael Riesch <michael.riesch@wolfvision.net>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230714013756.1546769-2-sre@kernel.org

drm/tests: Alloc drm_device on drm_exec tests

The drm_exec tests where crashing[0] because of a null dereference. This
is caused by a new access of the `driver` attribute of `struct
drm_driver` on drm_gem_private_object_init(). Alloc the drm_device to
fix that.

[0]
[15:05:24] ================== drm_exec (6 subtests) ===================
[15:05:24] [PASSED] sanitycheck
^CERROR:root:Build interruption occurred. Cleaning console.
[15:05:50] [ERROR] Test: drm_exec: missing expected subtest!
[15:05:50] BUG: kernel NULL pointer dereference, address: 00000000000000b0
[15:05:50] #PF: supervisor read access in kernel mode
[15:05:50] #PF: error_code(0x0000) - not-present page
[15:05:50] PGD 0 P4D 0
[15:05:50] Oops: 0000 [#1] PREEMPT NOPTI
[15:05:50] CPU: 0 PID: 23 Comm: kunit_try_catch Tainted: G                 N 6.4.0-rc7-02032-ge6303f323b1a #69
[15:05:50] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-1.fc37 04/01/2014
[15:05:50] RIP: 0010:drm_gem_private_object_init+0x60/0xc0

Fixes: e6303f323b1a ("drm: manager to keep track of GPUs VA mappings")
Signed-off-by: Arthur Grillo <arthurgrillo@riseup.net>
Tested-by: Danilo Krummrich <dakr@redhat.com>
Acked-by: Danilo Krummrich <dakr@redhat.com>
Reviewed-by: Maíra Canal <mcanal@igalia.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230731182241.240556-1-arthurgrillo@riseup.net

drm/virtio: Support sync objects

Add sync object DRM UAPI support to VirtIO-GPU driver. Sync objects
support is needed by native context VirtIO-GPU Mesa drivers, it also will
be used by Venus and Virgl contexts.

Reviewed-by; Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Tested-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com> # amdgpu nctx
Tested-by: Rob Clark <robdclark@gmail.com> # freedreno nctx
Reviewed-by: Rob Clark <robdclark@gmail.com>
Acked-by: Gurchetan Singh <gurchetansingh@chromium.org>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230416115237.798604-4-dmitry.osipenko@collabora.com

fbdev: Align deferred I/O with naming of helpers

Deferred-I/O generator macros generate callbacks for struct fb_ops
that operate on memory ranges in I/O address space or system address
space. Rename the macros to use the _IOMEM_ and _SYSMEM_ infixes of
their underlying helpers. Adapt all users. No functional changes.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Helge Deller <deller@gmx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230729193157.15446-5-tzimmermann@suse.de

fbdev: Use _DMAMEM_ infix for DMA-memory helpers

Change the infix for fbdev's DMA-memory helpers from _DMA_ to
_DMAMEM_. The helpers perform operations within DMA-able memory,
but they don't perform DMA operations. Naming should make this
clear. Adapt all users. No functional changes.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Helge Deller <deller@gmx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230729193157.15446-4-tzimmermann@suse.de

fbdev: Use _SYSMEM_ infix for system-memory helpers

Change the infix for fbdev's system-memory helpers from _SYS_ to
_SYSMEM_. The helpers perform operations within system memory, but
not on the state of the operating system itself. Naming should make
this clear. Adapt all users. No functional changes.

Suggested-by: Helge Deller <deller@gmx.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Helge Deller <deller@gmx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230729193157.15446-3-tzimmermann@suse.de

fbdev: Use _IOMEM_ infix for I/O-memory helpers

Change the infix for fbdev's I/O-memory helpers from _IO_ to _IOMEM_
to distiguish them from other types of I/O, such as file operations.
The helpers operate on memory ranges in the I/O address space and the
naming should make this clear. Adapt all users. No functional changes.

Suggested-by: Helge Deller <deller@gmx.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Helge Deller <deller@gmx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230729193157.15446-2-tzimmermann@suse.de

drm/panel: simple: Add missing connector type and pixel format for AUO T215HVN01

The connector type and pixel format are missing for this panel,
add them to prevent various drivers from failing to determine
either of those parameters.

Fixes: 7ee933a1d5c4 ("drm/panel: simple: Add support for AUO T215HVN01")
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230709134914.449328-1-marex@denx.de

drm/panel: Support for startek-kd070fhfid015 MIPI-DSI panel

This driver support the Startek KD070FHFID015, which is a 7-inch TFT LCD
display using MIPI DSI interface.

Signed-off-by: Guillaume La Roque <glaroque@baylibre.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230711-startek_display-v4-2-fb1d53bfdef6@baylibre.com

dt-bindings: display: panel: add startek kd070fhfid015 support

The Startek KD070FHFID015 is a 7-inch TFT LCD display with a resolution
of 1024 x 600 pixels.

Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230711-startek_display-v4-1-fb1d53bfdef6@baylibre.com

drm/panel: ilitek-ili9881c: Add TDO TL050HDV35 LCD panel

Add support for TDO TL050HDV35-H1311A LCD panel.

Signed-off-by: Matus Gajdos <matuszpd@gmail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230719102616.2259-3-matuszpd@gmail.com

dt-bindings: ili9881c: Add TDO TL050HDV35 LCD panel

Add support for TDO TL050HDV35-H1311A LCD panel.

Signed-off-by: Matus Gajdos <matuszpd@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230719102616.2259-2-matuszpd@gmail.com

drm: panel: simple: specify bpc for powertip_ph800480t013_idf02

Specify bpc value for the powertip_ph800480t013_idf02 panel to stop drm
code from complaining about unexpected bpc value (0).

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230727172445.1548834-1-dmitry.baryshkov@linaro.org

drm/panel: r66451: select CONFIG_DRM_DISPLAY_DP_HELPER

The newly added driver only builds when DRM_DISPLAY_DP_HELPER is enabled:

x86_64-linux-ld: drivers/gpu/drm/panel/panel-visionox-r66451.o: in function `visionox_r66451_enable':
panel-visionox-r66451.c:(.text+0x105): undefined reference to `drm_dsc_pps_payload_pack'

Select both CONFIG_DRM_DISPLAY_DP_HELPER and CONFIG_DRM_DISPLAY_HELPER to
ensure the helper function is always available.

Fixes: a6dfab2738fc ("drm/panel: Add driver for Visionox r66451 panel")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230719130940.659837-1-arnd@kernel.org

drm/vc4: tests: pv-muxing: Document test scenario

We've had a couple of tests that weren't really obvious, nor did they
document what they were supposed to test. Document that to make it
hopefully more obvious.

Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Maíra Canal <mairacanal@riseup.net>
Link: https://lore.kernel.org/r/20230728-kms-kunit-actions-rework-v3-11-952565ccccfe@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>

drm/vc4: tests: Switch to atomic state allocation helper

Now that we have a helper that takes care of an atomic state allocation
and cleanup, we can migrate to it to simplify our tests.

Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Maíra Canal <mairacanal@riseup.net>
Link: https://lore.kernel.org/r/20230728-kms-kunit-actions-rework-v3-10-952565ccccfe@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>

drm/vc4: tests: pv-muxing: Switch to managed locking init

The new helper to init the locking context allows to remove some
boilerplate.

Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Maíra Canal <mairacanal@riseup.net>
Link: https://lore.kernel.org/r/20230728-kms-kunit-actions-rework-v3-9-952565ccccfe@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>

drm/vc4: tests: mock: Use a kunit action to unregister DRM device

The *_mock_device functions allocate a DRM device that needs to be
released using drm_dev_unregister.

Now that we have a kunit release action API, we can switch to it and
don't require any kind of garbage collection from the caller.

Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Maíra Canal <mairacanal@riseup.net>
Link: https://lore.kernel.org/r/20230728-kms-kunit-actions-rework-v3-8-952565ccccfe@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>

drm/vc4: tests: pv-muxing: Remove call to drm_kunit_helper_free_device()

Calling drm_kunit_helper_free_device() to clean up the resources
allocated by drm_kunit_helper_alloc_device() is now optional and not
needed in most cases.

Remove it.

Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Maíra Canal <mairacanal@riseup.net>
Link: https://lore.kernel.org/r/20230728-kms-kunit-actions-rework-v3-7-952565ccccfe@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>

drm/tests: helpers: Create a helper to allocate an atomic state

As we gain more tests, boilerplate to allocate an atomic state and free
it starts to be there more and more as well.

In order to reduce the allocation boilerplate, we can create a helper
to create that atomic state, and call an action when the test is done.
This will also clean up the exit path.

Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Maíra Canal <mairacanal@riseup.net>
Link: https://lore.kernel.org/r/20230728-kms-kunit-actions-rework-v3-6-952565ccccfe@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>

drm/tests: helpers: Create a helper to allocate a locking ctx

As we get more and more tests, the locking context initialisation
creates more and more boilerplate, both at creation and destruction.

Let's create a helper that will allocate, initialise a context, and
register kunit actions to clean up once the test is done.

Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Maíra Canal <mairacanal@riseup.net>
Link: https://lore.kernel.org/r/20230728-kms-kunit-actions-rework-v3-5-952565ccccfe@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>

drm/tests: probe-helper: Remove call to drm_kunit_helper_free_device()

Calling drm_kunit_helper_free_device() to clean up the resources
allocated by drm_kunit_helper_alloc_device() is now optional and not
needed in most cases.

Remove it.

Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Maíra Canal <mairacanal@riseup.net>
Link: https://lore.kernel.org/r/20230728-kms-kunit-actions-rework-v3-4-952565ccccfe@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>

drm/tests: modes: Remove call to drm_kunit_helper_free_device()

Calling drm_kunit_helper_free_device() to clean up the resources
allocated by drm_kunit_helper_alloc_device() is now optional and not
needed in most cases.

Remove it.

Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Maíra Canal <mairacanal@riseup.net>
Link: https://lore.kernel.org/r/20230728-kms-kunit-actions-rework-v3-3-952565ccccfe@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>

drm/tests: client-modeset: Remove call to drm_kunit_helper_free_device()

Calling drm_kunit_helper_free_device() to clean up the resources
allocated by drm_kunit_helper_alloc_device() is now optional and not
needed in most cases.

Remove it.

Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Maíra Canal <mairacanal@riseup.net>
Link: https://lore.kernel.org/r/20230728-kms-kunit-actions-rework-v3-2-952565ccccfe@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>

drm/tests: helpers: Switch to kunit actions

Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Maíra Canal <mairacanal@riseup.net>
Link: https://lore.kernel.org/r/20230728-kms-kunit-actions-rework-v3-1-952565ccccfe@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>

drm/bridge: fix -Wunused-const-variable= warning

When building with W=1, the following warning occurs.

drivers/gpu/drm/bridge/analogix/analogix-anx78xx.c:48:17: warning: ‘anx781x_i2c_addresses’ defined but not used [-Wunused-const-variable=]  static const u8 anx781x_i2c_addresses[] = {
                 ^~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/bridge/analogix/analogix-anx78xx.c:40:17: warning: ‘anx7808_i2c_addresses’ defined but not used [-Wunused-const-variable=]  static const u8 anx7808_i2c_addresses[] = {

When CONFIG_IO is disabled, above two variables are not used,
since the place where it is used is inclueded in the macro
CONFIG_OF.

Even for drivers that do not depend on CONFIG_OF, it's almost
always better to leave out the of_match_ptr(), since the only
thing it can possibly do is to save a few bytes of .text if a
driver can be used both with and without it. Hence we remove
all of_match_ptr() used in other places.

Fixes: 0647e7dd3f7a ("drm/bridge: Add Analogix anx78xx support")
Signed-off-by: Zhu Wang <wangzhu9@huawei.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230731021345.219588-1-wangzhu9@huawei.com

drm/ssd130x: clean up some inconsistent indenting

No functional modification involved.

drivers/gpu/drm/solomon/ssd130x.c:715 ssd130x_primary_plane_duplicate_state() warn: inconsistent indenting.

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=6034
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230731074927.22755-1-jiapeng.chong@linux.alibaba.com

drm: Fix references to drm_plane_helper_check_state()

As of commit a01cb8ba3f628293 ("drm: Move drm_plane_helper_check_state()
into drm_atomic_helper.c"), drm_plane_helper_check_state() no longer
exists, but is part of drm_atomic_helper_check_plane_state().

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/8bb42a92fc20e3d11e5847e7f15a47c687b73104.1689779916.git.geert+renesas@glider.be

drm: Remove references to removed transitional helpers

The transitional helpers were removed a long time ago, but some
references stuck.  Remove them.

Fixes: 21ebe615c16994f3 ("drm: Remove transitional helpers")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ad4a2f1f9fa7da083132f6c35469c77a3f9e2f0e.1689779916.git.geert+renesas@glider.be

drm/todo: Convert list of fbconv links to footnotes

Convert the references to fbconv links to footnotes, so they can be
navigated.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/0761f98d3b6f8df9eea977eae063e35b450fda9e.1689779916.git.geert+renesas@glider.be

drm/todo: Add atomic modesetting references

The section about converting existing KMS drivers to atomic modesetting
mentions the existence of a conversion guide, but does not reference it.
While the guide is old and rusty, it still contains useful information,
so add a link to it.  Also link to the LWN.net articles that give an
overview about the atomic mode setting design.

While at it, remove the reference to unconverted virtual HW drivers, as
they've been converted.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/6809d0fda0716892cbccf0ee272481032251026d.1689779916.git.geert+renesas@glider.be

drm/repaper: Reduce temporary buffer size in repaper_fb_dirty()

As the temporary buffer is no longer used to store 8-bit grayscale data,
its size can be reduced to the size needed to store the monochrome
bitmap data.

Fixes: 24c6bedefbe71de9 ("drm/repaper: Use format helper for xrgb8888 to monochrome conversion")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220317081830.1211400-6-geert@linux-m68k.org

drm/armada: Fix off-by-one error in armada_overlay_get_property()

As ffs() returns one more than the index of the first bit set (zero
means no bits set), the color key mode value is shifted one position too
much.

Fix this by using FIELD_GET() instead.

Fixes: c96103b6c49ff9a8 ("drm/armada: move colorkey properties into overlay plane state")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/a4d779d954a7515ddbbf31cb0f0d8184c0e7c879.1689600265.git.geert+renesas@glider.be

drm: Spelling s/randevouz/rendez-vous/

Fix a misspelling of "rendez-vous".

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/084bf178dd676a4f07933eb9fcd04d3e30a779ba.1689600209.git.geert+renesas@glider.be

drm: Spelling s/sempahore/semaphore/

Fix misspellings of "semaphore".

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/8b0542c12a2427f34a792c41ac2d2a2922874bfa.1689600102.git.geert+renesas@glider.be

drm/udl: Convert to drm_crtc_helper_atomic_check()

Use the drm_crtc_helper_atomic_check() helper instead of open-coding the
same operation.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sui Jingfeng <suijingfeng@loongson.cn>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/dcb09c0c7bed1baee39a72caba098a399ce7f063.1689599767.git.geert+renesas@glider.be

drm/bridge_connector: Handle drm_connector_init_with_ddc() failures

drm_connector_init_with_ddc() can fail, but the call in
drm_bridge_connector_init() does not check that.  Fix this by adding
the missing error handling.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/3a7e9540d8dc94298d021aa2fb046ae8616ca4dd.1689599701.git.geert+renesas@glider.be

drm/nouveau/nvkm/dp: Add workaround to fix DP 1.3+ DPCD issues

Currently we use the drm_dp_dpcd_read_caps() helper in the DRM side of
nouveau in order to read the DPCD of a DP connector, which makes sure we do
the right thing and also check for extended DPCD caps. However, it turns
out we're not currently doing this on the nvkm side since we don't have
access to the drm_dp_aux structure there - which means that the DRM side of
the driver and the NVKM side can end up with different DPCD capabilities
for the same connector.

Ideally in order to fix this, we just want to use the
drm_dp_read_dpcd_caps() helper in nouveau. That's not currently possible
though, and is going to depend on having a bunch of the DP code moved out
of nvkm and into the DRM side of things as part of the GSP enablement work.

Until then however, let's workaround this problem by porting a copy of
drm_dp_read_dpcd_caps() into NVKM - which should fix this issue.

Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Link: https://gitlab.freedesktop.org/drm/nouveau/-/issues/211
Link: https://patchwork.freedesktop.org/patch/msgid/20230728225858.350581-1-lyude@redhat.com

gpu: ipu-v3: prg: Convert to devm_platform_ioremap_resource()

Use devm_platform_ioremap_resource() to simplify code.

Signed-off-by: Yangtao Li <frank.li@vivo.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://lore.kernel.org/r/20230710032355.72914-8-frank.li@vivo.com
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230710032355.72914-8-frank.li@vivo.com

gpu: ipu-v3: pre: Convert to devm_platform_ioremap_resource()

Use devm_platform_ioremap_resource() to simplify code.

Signed-off-by: Yangtao Li <frank.li@vivo.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://lore.kernel.org/r/20230710032355.72914-2-frank.li@vivo.com
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230710032355.72914-2-frank.li@vivo.com

drm/imx/ipuv3: ipuv3-plane: reuse local variable height in atomic_update

Use the already existing local variable height = drm_rect_height() >> 16
to replace other occurrences of the same value.

Suggested-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Link: https://lore.kernel.org/r/20221220094430.3469811-1-p.zabel@pengutronix.de
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20221220094430.3469811-1-p.zabel@pengutronix.de

drm/ast: report connection status on Display Port.

Aspeed always report the display port as "connected", because it
doesn't set a .detect_ctx callback.
Fix this by providing the proper detect callback for astdp and dp501.

This also fixes the following regression:
Since commit fae7d186403e ("drm/probe-helper: Default to 640x480 if no
EDID on DP") The default resolution is now 640x480 when no monitor is
connected. But Aspeed graphics is mostly used in servers, where no monitor
is attached. This also affects the remote BMC resolution to 640x480, which
is inconvenient, and breaks the anaconda installer.

v2: Add .detect callback to the dp/dp501 connector (Jani Nikula)
v3: Use .detect_ctx callback, and refactors (Thomas Zimmermann)
    Add a BMC virtual connector
v4: Better indent detect_ctx() functions (Thomas Zimmermann)
v5: Enable polling of the dp and dp501 connector status
    (Thomas Zimmermann)
v6: Change check order in ast_astdp_is_connected (Jammy Huang)

Fixes: fae7d186403e ("drm/probe-helper: Default to 640x480 if no EDID on DP")
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230713134316.332502-2-jfalempe@redhat.com

drm/ast: Add BMC virtual connector

Most aspeed devices have a BMC, which allows to remotely see the screen.
Also in the common use case, those servers don't have a display connected.
So add a Virtual connector, to reflect that even if no display is
connected, the framebuffer can still be seen remotely.
This prepares the work to implement a detect_ctx() for the Display port
connector.

v4: call drm_add_modes_noedid() with 4096x4096 (Thomas Zimmermann)
    remove useless struct field init to 0 (Thomas Zimmermann)
    don't use drm_simple_encoder_init() (Thomas Zimmermann)
    inline ast_bmc_connector_init() (Thomas Zimmermann)

Fixes: fae7d186403e ("drm/probe-helper: Default to 640x480 if no EDID on DP")
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230713134316.332502-1-jfalempe@redhat.com

drm/imx/dcss: Use dev_err_probe

This helps identifying problems with downstream pipeline devices, like
HDMI/DP output.

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Laurentiu Palcu <laurentiu.palcu@oss.nxp.com>
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@oss.nxp.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230717092950.448823-1-alexander.stein@ew.tq-group.com

drm/panel: simple: Simplify matching using of_device_get_match_data()

Both the patform_driver and mipi_dsi_driver structures contain pointers
to the match table used, so the custom code to obtain match and match
data can be replaced by calls to of_device_get_match_data().

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/64ded5b7e809e4c6e915b2c4d8b82e02319cd206.1690535800.git.geert+renesas@glider.be

video: logo: LOGO should depend on FB_CORE i.s.o. FB

If CONFIG_FB_CORE=y and CONFIG_FB=n, the frame buffer bootup logos can
no longer be enabled.  Fix this by making CONFIG_LOGO depend on
CONFIG_FB_CORE instead of CONFIG_FB, as there is no good reason for the
logo code to depend on the presence of real frame buffer device drivers.

Fixes: 55bffc8170bb ("fbdev: Split frame buffer support in FB and FB_CORE symbols")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/e4142b7cc9aad9975de1bc6b1c7d86ccee487e4c.1690535997.git.geert+renesas@glider.be

Revert "fbcon: Use kzalloc() in fbcon_prepare_logo()"

This reverts commit a6a00d7e8ffd78d1cdb7a43f1278f081038c638f.

This commit is redundant, as the root cause that resulted in a false
positive was fixed by commit 27f644dc5a77f8d9 ("x86: kmsan: use C
versions of memset16/memset32/memset64").

Closes: https://lore.kernel.org/r/CAMuHMdUH4CU9EfoirSxjivg08FDimtstn7hizemzyQzYeq6b6g@mail.gmail.com/
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/bd8b71bb13af21cc48af40349db440f794336d3a.1690535849.git.geert+renesas@glider.be

drm/gem-fb-helper: Consistenly use drm_dbg_kms()

All debug messages in drm_gem_framebuffer_helper.c use drm_dbg_kms(),
except for one, which uses drm_dbg().
Replace the outlier by drm_dbg_kms() to restore consistency.

Fixes: c91acda3a380 ("drm/gem: Check for valid formats")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Maíra Canal <mcanal@igalia.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/7d56615fbef2d4d0e5f4c4a23f57269bf8bdb71f.1690535176.git.geert+renesas@glider.be

drm/atomic-helper: Update reference to drm_crtc_force_disable_all()

drm_crtc_force_disable_all() was renamed to
drm_helper_force_disable_all(), but one reference was not updated.

Fixes: c2d88e06bcb9 ("drm: Move the legacy kms disable_all helper to crtc helpers")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Sui Jingfeng <suijingfeng@loongson.cn>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/b8c9c1a8a05dbf0be8e8be98cfdeafa9cecd8cef.1690535002.git.geert+renesas@glider.be

drm/vkms: Fix race-condition between the hrtimer and the atomic commit

Currently, it is possible for the composer to be set as enabled and then
as disabled without a proper call for the vkms_vblank_simulate(). This
is problematic, because the driver would skip one CRC output, causing CRC
tests to fail. Therefore, we need to make sure that, for each time the
composer is set as enabled, a composer job is added to the queue.

In order to provide this guarantee, add a mutex that will lock before
the composer is set as enabled and will unlock only after the composer
job is added to the queue. This way, we can have a guarantee that the
driver won't skip a CRC entry.

This race-condition is affecting the IGT test "writeback-check-output",
making the test fail and also, leaking writeback framebuffers, as the
writeback job is queued, but it is not signaled. This patch avoids both
problems.

[v2]:
    * Create a new mutex and keep the spinlock across the atomic commit in
      order to avoid interrupts that could result in deadlocks.

Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Arthur Grillo <arthurgrillo@riseup.net>
Signed-off-by: Maíra Canal <mairacanal@riseup.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20230523123207.173976-1-mcanal@igalia.com

drm/vkms: Add support to 1D gamma LUT

Support a 1D gamma LUT with interpolation for each color channel on the
VKMS driver. Add a check for the LUT length by creating
vkms_atomic_check().

Enable VKMS to run the test igt@kms_plane@pixel-format.

Tested with:
igt@kms_color@gamma
igt@kms_color@legacy-gamma
igt@kms_color@invalid-gamma-lut-sizes

v2:
    - Add interpolation between the values of the LUT (Simon Ser)

v3:
    - s/ratio/delta (Pekka)
    - s/color_channel/channel_value (Pekka)
    - s/lut_area/lut_channel
    - Store the `drm_color_lut`, `lut_length`, and
      `channel_value2index_ratio` inside a struct called `vkms_lut`
      (Pekka)
    - Pre-compute some constants values used through the LUT procedure
      (Pekka)
    - Change the switch statement to a cast to __u16* (Pekka)
    - Make the apply_lut_to_channel_value return the computation result
      (Pekka)

v4:
    - Add a comment explaining that `enum lut_area` depends on the
      layout of `struct drm_color_lut` (Pekka)
    - Remove unused variable (kernel test robot)

v5:
    - Mention that this will make it possible to run the test
      igt@kms_plane@pixel-format (Maíra)
    - s/had/has (Maíra)

Signed-off-by: Arthur Grillo <arthurgrillo@riseup.net>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Maíra Canal <mairacanal@riseup.net>
Signed-off-by: Maíra Canal <mairacanal@riseup.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20230709013835.161004-1-arthurgrillo@riseup.net

drm/tegra: sor: Convert to devm_platform_ioremap_resource()

Use devm_platform_ioremap_resource() to simplify code.

Signed-off-by: Yangtao Li <frank.li@vivo.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230710032355.72914-16-frank.li@vivo.com

drm/tegra: hdmi: Convert to devm_platform_ioremap_resource()

Use devm_platform_ioremap_resource() to simplify code.

Signed-off-by: Yangtao Li <frank.li@vivo.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230710032355.72914-5-frank.li@vivo.com

drm/tegra: dpaux: Fix incorrect return value of platform_get_irq

When platform_get_irq fails, we should return dpaux->irq
instead of -ENXIO.

Fixes: 6b6b604215c6 ("drm/tegra: Add eDP support")
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230710032355.72914-13-frank.li@vivo.com