Tiezhu Yang [Tue, 26 Oct 2021 01:51:28 +0000 (09:51 +0800)]
samples/kretprobes: Fix return value if register_kretprobe() failed
[ Upstream commit
f76fbbbb5061fe14824ba5807c44bd7400a6b4e1 ]
Use the actual return value instead of always -1 if register_kretprobe()
failed.
E.g. without this patch:
# insmod samples/kprobes/kretprobe_example.ko func=no_such_func
insmod: ERROR: could not insert module samples/kprobes/kretprobe_example.ko: Operation not permitted
With this patch:
# insmod samples/kprobes/kretprobe_example.ko func=no_such_func
insmod: ERROR: could not insert module samples/kprobes/kretprobe_example.ko: Unknown symbol in module
Link: https://lkml.kernel.org/r/1635213091-24387-2-git-send-email-yangtiezhu@loongson.cn
Fixes:
804defea1c02 ("Kprobes: move kprobe examples to samples/")
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Lad Prabhakar [Mon, 25 Oct 2021 20:56:27 +0000 (21:56 +0100)]
spi: spi-rpc-if: Check return value of rpcif_sw_init()
[ Upstream commit
0b0a281ed7001d4c4f4c47bdc84680c4997761ca ]
rpcif_sw_init() can fail so make sure we check the return value
of it and on error exit rpcif_spi_probe() callback with error code.
Fixes:
eb8d6d464a27 ("spi: add Renesas RPC-IF driver")
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20211025205631.21151-4-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jon Maxwell [Sun, 24 Oct 2021 23:59:03 +0000 (10:59 +1100)]
tcp: don't free a FIN sk_buff in tcp_remove_empty_skb()
[ Upstream commit
cf12e6f9124629b18a6182deefc0315f0a73a199 ]
v1: Implement a more general statement as recommended by Eric Dumazet. The
sequence number will be advanced, so this check will fix the FIN case and
other cases.
A customer reported sockets stuck in the CLOSING state. A Vmcore revealed that
the write_queue was not empty as determined by tcp_write_queue_empty() but the
sk_buff containing the FIN flag had been freed and the socket was zombied in
that state. Corresponding pcaps show no FIN from the Linux kernel on the wire.
Some instrumentation was added to the kernel and it was found that there is a
timing window where tcp_sendmsg() can run after tcp_send_fin().
tcp_sendmsg() will hit an error, for example:
1269 ▹ if (sk->sk_err || (sk->sk_shutdown & SEND_SHUTDOWN))↩
1270 ▹ ▹ goto do_error;↩
tcp_remove_empty_skb() will then free the FIN sk_buff as "skb->len == 0". The
TCP socket is now wedged in the FIN-WAIT-1 state because the FIN is never sent.
If the other side sends a FIN packet the socket will transition to CLOSING and
remain that way until the system is rebooted.
Fix this by checking for the FIN flag in the sk_buff and don't free it if that
is the case. Testing confirmed that fixed the issue.
Fixes:
fdfc5c8594c2 ("tcp: remove empty skb from write queue in error cases")
Signed-off-by: Jon Maxwell <jmaxwell37@gmail.com>
Reported-by: Monir Zouaoui <Monir.Zouaoui@mail.schwarz>
Reported-by: Simon Stier <simon.stier@mail.schwarz>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ilya Leoshkevich [Tue, 26 Oct 2021 01:08:26 +0000 (03:08 +0200)]
libbpf: Fix endianness detection in BPF_CORE_READ_BITFIELD_PROBED()
[ Upstream commit
45f2bebc8079788f62f22d9e8b2819afb1789d7b ]
__BYTE_ORDER is supposed to be defined by a libc, and __BYTE_ORDER__ -
by a compiler. bpf_core_read.h checks __BYTE_ORDER == __LITTLE_ENDIAN,
which is true if neither are defined, leading to incorrect behavior on
big-endian hosts if libc headers are not included, which is often the
case.
Fixes:
ee26dade0e3b ("libbpf: Add support for relocatable bitfields")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211026010831.748682-2-iii@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Mark Brown [Fri, 24 Sep 2021 14:41:11 +0000 (15:41 +0100)]
tpm_tis_spi: Add missing SPI ID
[ Upstream commit
7eba41fe8c7bb01ff3d4b757bd622375792bc720 ]
In commit
c46ed2281bbe ("tpm_tis_spi: add missing SPI device ID entries")
we added SPI IDs for all the DT aliases to handle the fact that we always
use SPI modaliases to load modules even when probed via DT however the
mentioned commit missed that the SPI and OF device ID entries did not
match and were different and so DT nodes with compatible
"tcg,tpm_tis-spi" will not match. Add an extra ID for tpm_tis-spi
rather than just fix the existing one since what's currently there is
going to be better for anyone actually using SPI IDs to instantiate.
Fixes:
c46ed2281bbe ("tpm_tis_spi: add missing SPI device ID entries")
Fixes:
96c8395e2166 ("spi: Revert modalias changes")
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Hao Wu [Wed, 8 Sep 2021 09:26:06 +0000 (02:26 -0700)]
tpm: fix Atmel TPM crash caused by too frequent queries
[ Upstream commit
79ca6f74dae067681a779fd573c2eb59649989bc ]
The Atmel TPM 1.2 chips crash with error
`tpm_try_transmit: send(): error -62` since kernel 4.14.
It is observed from the kernel log after running `tpm_sealdata -z`.
The error thrown from the command is as follows
```
$ tpm_sealdata -z
Tspi_Key_LoadKey failed: 0x00001087 - layer=tddl,
code=0087 (135), I/O error
```
The issue was reproduced with the following Atmel TPM chip:
```
$ tpm_version
T0 TPM 1.2 Version Info:
Chip Version: 1.2.66.1
Spec Level: 2
Errata Revision: 3
TPM Vendor ID: ATML
TPM Version:
01010000
Manufacturer Info:
41544d4c
```
The root cause of the issue is due to the TPM calls to msleep()
were replaced with usleep_range() [1], which reduces
the actual timeout. Via experiments, it is observed that
the original msleep(5) actually sleeps for 15ms.
Because of a known timeout issue in Atmel TPM 1.2 chip,
the shorter timeout than 15ms can cause the error described above.
A few further changes in kernel 4.16 [2] and 4.18 [3, 4] further
reduced the timeout to less than 1ms. With experiments,
the problematic timeout in the latest kernel is the one
for `wait_for_tpm_stat`.
To fix it, the patch reverts the timeout of `wait_for_tpm_stat`
to 15ms for all Atmel TPM 1.2 chips, but leave it untouched
for Ateml TPM 2.0 chip, and chips from other vendors.
As explained above, the chosen 15ms timeout is
the actual timeout before this issue introduced,
thus the old value is used here.
Particularly, TPM_ATML_TIMEOUT_WAIT_STAT_MIN is set to 14700us,
TPM_ATML_TIMEOUT_WAIT_STAT_MIN is set to 15000us according to
the existing TPM_TIMEOUT_RANGE_US (300us).
The fixed has been tested in the system with the affected Atmel chip
with no issues observed after boot up.
References:
[1]
9f3fc7bcddcb tpm: replace msleep() with usleep_range() in TPM
1.2/2.0 generic drivers
[2]
cf151a9a44d5 tpm: reduce tpm polling delay in tpm_tis_core
[3]
59f5a6b07f64 tpm: reduce poll sleep time in tpm_transmit()
[4]
424eaf910c32 tpm: reduce polling time to usecs for even finer
granularity
Fixes:
9f3fc7bcddcb ("tpm: replace msleep() with usleep_range() in TPM 1.2/2.0 generic drivers")
Link: https://patchwork.kernel.org/project/linux-integrity/patch/20200926223150.109645-1-hao.wu@rubrik.com/
Signed-off-by: Hao Wu <hao.wu@rubrik.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Mark Rutland [Wed, 20 Oct 2021 16:25:22 +0000 (17:25 +0100)]
irq: mips: avoid nested irq_enter()
[ Upstream commit
c65b52d02f6c1a06ddb20cba175ad49eccd6410d ]
As bcm6345_l1_irq_handle() is a chained irqchip handler, it will be
invoked within the context of the root irqchip handler, which must have
entered IRQ context already.
When bcm6345_l1_irq_handle() calls arch/mips's do_IRQ() , this will nest
another call to irq_enter(), and the resulting nested increment to
`rcu_data.dynticks_nmi_nesting` will cause rcu_is_cpu_rrupt_from_idle()
to fail to identify wakeups from idle, resulting in failure to preempt,
and RCU stalls.
Chained irqchip handlers must invoke IRQ handlers by way of thee core
irqchip code, i.e. generic_handle_irq() or generic_handle_domain_irq()
and should not call do_IRQ(), which is intended only for root irqchip
handlers.
Fix bcm6345_l1_irq_handle() by calling generic_handle_irq() directly.
Fixes:
c7c42ec2baa1de7a ("irqchips/bmips: Add bcm6345-l1 interrupt controller")
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Claudio Imbrenda [Mon, 20 Sep 2021 13:24:51 +0000 (15:24 +0200)]
KVM: s390: pv: avoid stalls for kvm_s390_pv_init_vm
[ Upstream commit
1e2aa46de526a5adafe580bca4c25856bb06f09e ]
When the system is heavily overcommitted, kvm_s390_pv_init_vm might
generate stall notifications.
Fix this by using uv_call_sched instead of just uv_call. This is ok because
we are not holding spinlocks.
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Fixes:
214d9bbcd3a672 ("s390/mm: provide memory management functions for protected KVM guests")
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Message-Id: <
20210920132502.36111-4-imbrenda@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Claudio Imbrenda [Mon, 20 Sep 2021 13:24:50 +0000 (15:24 +0200)]
KVM: s390: pv: avoid double free of sida page
[ Upstream commit
d4074324b07a94a1fca476d452dfbb3a4e7bf656 ]
If kvm_s390_pv_destroy_cpu is called more than once, we risk calling
free_page on a random page, since the sidad field is aliased with the
gbea, which is not guaranteed to be zero.
This can happen, for example, if userspace calls the KVM_PV_DISABLE
IOCTL, and it fails, and then userspace calls the same IOCTL again.
This scenario is only possible if KVM has some serious bug or if the
hardware is broken.
The solution is to simply return successfully immediately if the vCPU
was already non secure.
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Fixes:
19e1227768863a1469797c13ef8fea1af7beac2c ("KVM: S390: protvirt: Introduce instruction data area bounce buffer")
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-Id: <
20210920132502.36111-3-imbrenda@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
David Hildenbrand [Thu, 9 Sep 2021 16:22:41 +0000 (18:22 +0200)]
s390/gmap: don't unconditionally call pte_unmap_unlock() in __gmap_zap()
[ Upstream commit
b159f94c86b43cf7e73e654bc527255b1f4eafc4 ]
... otherwise we will try unlocking a spinlock that was never locked via a
garbage pointer.
At the time we reach this code path, we usually successfully looked up
a PGSTE already; however, evil user space could have manipulated the VMA
layout in the meantime and triggered removal of the page table.
Fixes:
1e133ab296f3 ("s390/mm: split arch/s390/mm/pgtable.c")
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Link: https://lore.kernel.org/r/20210909162248.14969-3-david@redhat.com
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Andrii Nakryiko [Sat, 23 Oct 2021 00:31:57 +0000 (17:31 -0700)]
libbpf: Fix BTF header parsing checks
[ Upstream commit
c825f5fee19caf301d9821cd79abaa734322de26 ]
Original code assumed fixed and correct BTF header length. That's not
always the case, though, so fix this bug with a proper additional check.
And use actual header length instead of sizeof(struct btf_header) in
sanity checks.
Fixes:
8a138aed4a80 ("bpf: btf: Add BTF support to libbpf")
Reported-by: Evgeny Vereshchagin <evvers@ya.ru>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211023003157.726961-2-andrii@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Andrii Nakryiko [Sat, 23 Oct 2021 00:31:56 +0000 (17:31 -0700)]
libbpf: Fix overflow in BTF sanity checks
[ Upstream commit
5245dafe3d49efba4d3285cf27ee1cc1eeafafc6 ]
btf_header's str_off+str_len or type_off+type_len can overflow as they
are u32s. This will lead to bypassing the sanity checks during BTF
parsing, resulting in crashes afterwards. Fix by using 64-bit signed
integers for comparison.
Fixes:
d8123624506c ("libbpf: Fix BTF data layout checks and allow empty BTF")
Reported-by: Evgeny Vereshchagin <evvers@ya.ru>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211023003157.726961-1-andrii@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Andrii Nakryiko [Sun, 10 Jan 2021 07:03:41 +0000 (23:03 -0800)]
libbpf: Allow loading empty BTFs
[ Upstream commit
b8d52264df85ec12f370c0a8b28d0ac59a05877a ]
Empty BTFs do come up (e.g., simple kernel modules with no new types and
strings, compared to the vmlinux BTF) and there is nothing technically wrong
with them. So remove unnecessary check preventing loading empty BTFs.
Fixes:
d8123624506c ("libbpf: Fix BTF data layout checks and allow empty BTF")
Reported-by: Christopher William Snowhill <chris@kode54.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210110070341.1380086-2-andrii@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Andrii Nakryiko [Thu, 5 Nov 2020 04:33:57 +0000 (20:33 -0800)]
libbpf: Fix BTF data layout checks and allow empty BTF
[ Upstream commit
d8123624506cd62730c9cd9c7672c698e462703d ]
Make data section layout checks stricter, disallowing overlap of types and
strings data.
Additionally, allow BTFs with no type data. There is nothing inherently wrong
with having BTF with no types (put potentially with some strings). This could
be a situation with kernel module BTFs, if module doesn't introduce any new
type information.
Also fix invalid offset alignment check for btf->hdr->type_off.
Fixes:
8a138aed4a80 ("bpf: btf: Add BTF support to libbpf")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20201105043402.2530976-8-andrii@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Quentin Monnet [Fri, 22 Oct 2021 09:47:43 +0000 (10:47 +0100)]
bpftool: Avoid leaking the JSON writer prepared for program metadata
[ Upstream commit
e89ef634f81c9d90e1824ab183721f3b361472e6 ]
Bpftool creates a new JSON object for writing program metadata in plain
text mode, regardless of metadata being present or not. Then this writer
is freed if any metadata has been found and printed, but it leaks
otherwise. We cannot destroy the object unconditionally, because the
destructor prints an undesirable line break. Instead, make sure the
writer is created only after we have found program metadata to print.
Found with valgrind.
Fixes:
aff52e685eb3 ("bpftool: Support dumping metadata")
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211022094743.11052-1-quentin@isovalent.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jim Mattson [Thu, 30 Sep 2021 00:36:49 +0000 (17:36 -0700)]
KVM: selftests: Fix nested SVM tests when built with clang
[ Upstream commit
ed290e1c20da19fa100a3e0f421aa31b65984960 ]
Though gcc conveniently compiles a simple memset to "rep stos," clang
prefers to call the libc version of memset. If a test is dynamically
linked, the libc memset isn't available in L1 (nor is the PLT or the
GOT, for that matter). Even if the test is statically linked, the libc
memset may choose to use some CPU features, like AVX, which may not be
enabled in L1. Note that __builtin_memset doesn't solve the problem,
because (a) the compiler is free to call memset anyway, and (b)
__builtin_memset may also choose to use features like AVX, which may
not be available in L1.
To avoid a myriad of problems, use an explicit "rep stos" to clear the
VMCB in generic_svm_setup(), which is called both from L0 and L1.
Reported-by: Ricardo Koller <ricarkol@google.com>
Signed-off-by: Jim Mattson <jmattson@google.com>
Fixes:
20ba262f8631a ("selftests: KVM: AMD Nested test infrastructure")
Message-Id: <
20210930003649.4026553-1-jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ricardo Koller [Wed, 10 Feb 2021 03:17:19 +0000 (03:17 +0000)]
KVM: selftests: Add operand to vmsave/vmload/vmrun in svm.c
[ Upstream commit
47bc726fe8d1910872dc3d7e7ec70f8b9e6043b7 ]
Building the KVM selftests with LLVM's integrated assembler fails with:
$ CFLAGS=-fintegrated-as make -C tools/testing/selftests/kvm CC=clang
lib/x86_64/svm.c:77:16: error: too few operands for instruction
asm volatile ("vmsave\n\t" : : "a" (vmcb_gpa) : "memory");
^
<inline asm>:1:2: note: instantiated into assembly here
vmsave
^
lib/x86_64/svm.c:134:3: error: too few operands for instruction
"vmload\n\t"
^
<inline asm>:1:2: note: instantiated into assembly here
vmload
^
This is because LLVM IAS does not currently support calling vmsave,
vmload, or vmload without an explicit %rax operand.
Add an explicit operand to vmsave, vmload, and vmrum in svm.c. Fixing
this was suggested by Sean Christopherson.
Tested: building without this error in clang 11. The following patch
(not queued yet) needs to be applied to solve the other remaining error:
"selftests: kvm: remove reassignment of non-absolute variables".
Suggested-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/kvm/X+Df2oQczVBmwEzi@google.com/
Reviewed-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Ricardo Koller <ricarkol@google.com>
Message-Id: <
20210210031719.769837-1-ricarkol@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Tetsuo Handa [Tue, 19 Oct 2021 11:27:26 +0000 (20:27 +0900)]
smackfs: use netlbl_cfg_cipsov4_del() for deleting cipso_v4_doi
[ Upstream commit
0934ad42bb2c5df90a1b9de690f93de735b622fe ]
syzbot is reporting UAF at cipso_v4_doi_search() [1], for smk_cipso_doi()
is calling kfree() without removing from the cipso_v4_doi_list list after
netlbl_cfg_cipsov4_map_add() returned an error. We need to use
netlbl_cfg_cipsov4_del() in order to remove from the list and wait for
RCU grace period before kfree().
Link: https://syzkaller.appspot.com/bug?extid=93dba5b91f0fed312cbd
Reported-by: syzbot <syzbot+93dba5b91f0fed312cbd@syzkaller.appspotmail.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Fixes:
6c2e8ac0953fccdd ("netlabel: Update kernel configuration API")
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jessica Zhang [Wed, 20 Oct 2021 17:57:33 +0000 (10:57 -0700)]
drm/msm: Fix potential NULL dereference in DPU SSPP
[ Upstream commit
8bf71a5719b6cc5b6ba358096081e5d50ea23ab6 ]
Move initialization of sblk in _sspp_subblk_offset() after NULL check to
avoid potential NULL pointer dereference.
Fixes:
25fdd5933e4c ("drm/msm: Add SDM845 DPU support")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jessica Zhang <jesszhan@codeaurora.org>
Link: https://lore.kernel.org/r/20211020175733.3379-1-jesszhan@codeaurora.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Joerg Roedel [Thu, 21 Oct 2021 08:08:32 +0000 (10:08 +0200)]
x86/sev: Fix stack type check in vc_switch_off_ist()
[ Upstream commit
5681981fb788281b09a4ea14d310d30b2bd89132 ]
The value of STACK_TYPE_EXCEPTION_LAST points to the last _valid_
exception stack. Reflect that in the check done in the
vc_switch_off_ist() function.
Fixes:
a13644f3a53de ("x86/entry/64: Add entry code for #VC handler")
Reported-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20211021080833.30875-2-joro@8bytes.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kees Cook [Sat, 28 Aug 2021 17:57:47 +0000 (10:57 -0700)]
clocksource/drivers/timer-ti-dm: Select TIMER_OF
[ Upstream commit
eda9a4f7af6ee47e9e131f20e4f8a41a97379293 ]
When building OMAP_DM_TIMER without TIMER_OF, there are orphan sections
due to the use of TIMER_OF_DELCARE() without CONFIG_TIMER_OF. Select
CONFIG_TIMER_OF when enaling OMAP_DM_TIMER:
arm-linux-gnueabi-ld: warning: orphan section `__timer_of_table' from `drivers/clocksource/timer-ti-dm-systimer.o' being placed in section `__timer_of_table'
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/lkml/202108282255.tkdt4ani-lkp@intel.com/
Cc: Tony Lindgren <tony@atomide.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Keerthy <j-keerthy@ti.com>
Cc: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Cc: Ladislav Michl <ladis@linux-mips.org>
Cc: Grygorii Strashko <grygorii.strashko@ti.com>
Cc: linux-omap@vger.kernel.org
Fixes:
52762fbd1c47 ("clocksource/drivers/timer-ti-dm: Add clockevent and clocksource support")
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20210828175747.3777891-1-keescook@chromium.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Anders Roxell [Thu, 7 Oct 2021 19:13:37 +0000 (21:13 +0200)]
PM: hibernate: fix sparse warnings
[ Upstream commit
01de5fcd8b1ac0ca28d2bb0921226a54fdd62684 ]
When building the kernel with sparse enabled 'C=1' the following
warnings shows up:
kernel/power/swap.c:390:29: warning: incorrect type in assignment (different base types)
kernel/power/swap.c:390:29: expected int ret
kernel/power/swap.c:390:29: got restricted blk_status_t
This is due to function hib_wait_io() returns a 'blk_status_t' which is
a bitwise u8. Commit
5416da01ff6e ("PM: hibernate: Remove
blk_status_to_errno in hib_wait_io") seemed to have mixed up the return
type. However, the
4e4cbee93d56 ("block: switch bios to blk_status_t")
actually broke the behaviour by returning the wrong type.
Rework so function hib_wait_io() returns a 'int' instead of
'blk_status_t' and make sure to call function
blk_status_to_errno(hb->error)' when returning from function
hib_wait_io() a int gets returned.
Fixes:
4e4cbee93d56 ("block: switch bios to blk_status_t")
Fixes:
5416da01ff6e ("PM: hibernate: Remove blk_status_to_errno in hib_wait_io")
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Max Gurtovoy [Sun, 17 Oct 2021 08:58:16 +0000 (11:58 +0300)]
nvme-rdma: fix error code in nvme_rdma_setup_ctrl
[ Upstream commit
09748122009aed7bfaa7acc33c10c083a4758322 ]
In case that icdoff is not zero or mandatory keyed sgls are not
supported by the NVMe/RDMA target, we'll go to error flow but we'll
return 0 to the caller. Fix it by returning an appropriate error code.
Fixes:
c66e2998c8ca ("nvme-rdma: centralize controller setup sequence")
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Stefan Agner [Tue, 19 Oct 2021 19:16:47 +0000 (21:16 +0200)]
phy: micrel: ksz8041nl: do not use power down mode
[ Upstream commit
2641b62d2fab52648e34cdc6994b2eacde2d27c1 ]
Some Micrel KSZ8041NL PHY chips exhibit continuous RX errors after using
the power down mode bit (0.11). If the PHY is taken out of power down
mode in a certain temperature range, the PHY enters a weird state which
leads to continuously reporting RX errors. In that state, the MAC is not
able to receive or send any Ethernet frames and the activity LED is
constantly blinking. Since Linux is using the suspend callback when the
interface is taken down, ending up in that state can easily happen
during a normal startup.
Micrel confirmed the issue in errata DS80000700A [*], caused by abnormal
clock recovery when using power down mode. Even the latest revision (A4,
Revision ID 0x1513) seems to suffer that problem, and according to the
errata is not going to be fixed.
Remove the suspend/resume callback to avoid using the power down mode
completely.
[*] https://ww1.microchip.com/downloads/en/DeviceDoc/
80000700A.pdf
Fixes:
1a5465f5d6a2 ("phy/micrel: Add suspend/resume support to Micrel PHYs")
Signed-off-by: Stefan Agner <stefan@agner.ch>
Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Tim Gardner [Tue, 19 Oct 2021 18:19:50 +0000 (12:19 -0600)]
net: enetc: unmap DMA in enetc_send_cmd()
[ Upstream commit
cd4bc63de774eee95e9bac26a565cd80e0fca421 ]
Coverity complains of a possible dereference of a null return value.
5. returned_null: kzalloc returns NULL. [show details]
6. var_assigned: Assigning: si_data = NULL return value from kzalloc.
488 si_data = kzalloc(data_size, __GFP_DMA | GFP_KERNEL);
489 cbd.length = cpu_to_le16(data_size);
490
491 dma = dma_map_single(&priv->si->pdev->dev, si_data,
492 data_size, DMA_FROM_DEVICE);
While this kzalloc() is unlikely to fail, I did notice that the function
returned without unmapping si_data.
Fix this by refactoring the error paths and checking for kzalloc()
failure.
Fixes:
888ae5a3952ba ("net: enetc: add tc flower psfp offload driver")
Cc: Claudiu Manoil <claudiu.manoil@nxp.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: netdev@vger.kernel.org
Cc: linux-kernel@vger.kernel.org (open list)
Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
Acked-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jonas Dreßler [Sat, 16 Oct 2021 15:32:43 +0000 (17:32 +0200)]
mwifiex: Send DELBA requests according to spec
[ Upstream commit
cc8a8bc37466f79b24d972555237f3d591150602 ]
While looking at on-air packets using Wireshark, I noticed we're never
setting the initiator bit when sending DELBA requests to the AP: While
we set the bit on our del_ba_param_set bitmask, we forget to actually
copy that bitmask over to the command struct, which means we never
actually set the initiator bit.
Fix that and copy the bitmask over to the host_cmd_ds_11n_delba command
struct.
Fixes:
5e6e3a92b9a4 ("wireless: mwifiex: initial commit for Marvell mwifiex driver")
Signed-off-by: Jonas Dreßler <verdre@v0yd.nl>
Acked-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20211016153244.24353-5-verdre@v0yd.nl
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ziyang Xuan [Fri, 15 Oct 2021 04:03:35 +0000 (12:03 +0800)]
rsi: stop thread firstly in rsi_91x_init() error handling
[ Upstream commit
515e7184bdf0a3ebf1757cc77fb046b4fe282189 ]
When fail to init coex module, free 'common' and 'adapter' directly, but
common->tx_thread which will access 'common' and 'adapter' is running at
the same time. That will trigger the UAF bug.
==================================================================
BUG: KASAN: use-after-free in rsi_tx_scheduler_thread+0x50f/0x520 [rsi_91x]
Read of size 8 at addr
ffff8880076dc000 by task Tx-Thread/124777
CPU: 0 PID: 124777 Comm: Tx-Thread Not tainted 5.15.0-rc5+ #19
Call Trace:
dump_stack_lvl+0xe2/0x152
print_address_description.constprop.0+0x21/0x140
? rsi_tx_scheduler_thread+0x50f/0x520
kasan_report.cold+0x7f/0x11b
? rsi_tx_scheduler_thread+0x50f/0x520
rsi_tx_scheduler_thread+0x50f/0x520
...
Freed by task 111873:
kasan_save_stack+0x1b/0x40
kasan_set_track+0x1c/0x30
kasan_set_free_info+0x20/0x30
__kasan_slab_free+0x109/0x140
kfree+0x117/0x4c0
rsi_91x_init+0x741/0x8a0 [rsi_91x]
rsi_probe+0x9f/0x1750 [rsi_usb]
Stop thread before free 'common' and 'adapter' to fix it.
Fixes:
2108df3c4b18 ("rsi: add coex support")
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20211015040335.1021546-1-william.xuanziyang@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Shayne Chen [Mon, 18 Oct 2021 08:07:04 +0000 (16:07 +0800)]
mt76: mt7915: fix muar_idx in mt7915_mcu_alloc_sta_req()
[ Upstream commit
161cc13912d3c3e8857001988dfba39be842454a ]
For broadcast/multicast wcid, the muar_idx should be 0xe.
Fixes:
e57b7901469f ("mt76: add mac80211 driver for MT7915 PCIe-based chipsets")
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Shayne Chen [Mon, 18 Oct 2021 08:07:02 +0000 (16:07 +0800)]
mt76: mt7915: fix sta_rec_wtbl tag len
[ Upstream commit
afa0370f3a3a64af6d368da0bedd72ab2a026cd0 ]
Fix tag len error for sta_rec_wtbl, which causes fw parsing error for
the tags placed behind it.
Fixes:
e57b7901469f ("mt76: add mac80211 driver for MT7915 PCIe-based chipsets")
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Lorenzo Bianconi [Tue, 14 Sep 2021 16:42:51 +0000 (18:42 +0200)]
mt76: mt7915: fix possible infinite loop release semaphore
[ Upstream commit
e500c9470e26be66eb2bc6de773ae9091149118a ]
Fix possible infinite loop in mt7915_load_patch if
mt7915_mcu_patch_sem_ctrl always returns an error.
Fixes:
e57b7901469fc ("mt76: add mac80211 driver for MT7915 PCIe-based chipsets")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Lorenzo Bianconi [Tue, 22 Jun 2021 07:48:30 +0000 (09:48 +0200)]
mt76: mt76x02: fix endianness warnings in mt76x02_mac.c
[ Upstream commit
c33edef520213feccebc22c9474c685b9fb60611 ]
Fix the following sparse warning in mt76x02_mac_write_txwi and
mt76x02_mac_tx_rate_val routines:
drivers/net/wireless/mediatek/mt76/mt76x02_mac.c:237:19:
warning: restricted __le16 degrades to intege
warning: cast from restricted __le16
drivers/net/wireless/mediatek/mt76/mt76x02_mac.c:383:28:
warning: incorrect type in assignment (different base types)
expected restricted __le16 [usertype] rate
got unsigned long
Fixes:
db9f11d3433f7 ("mt76: store wcid tx rate info in one u32 reduce locking")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Lorenzo Bianconi [Mon, 21 Jun 2021 21:53:22 +0000 (23:53 +0200)]
mt76: mt7615: fix endianness warning in mt7615_mac_write_txwi
[ Upstream commit
d81bfb41e30c42531536c5d2baa4d275a8309715 ]
Fix the following sparse warning in mt7615_mac_write_txwi routine:
drivers/net/wireless/mediatek/mt76/mt7615/mac.c:758:17:
warning: incorrect type in assignment
expected restricted __le32 [usertype]
got unsigned long
Fixes:
04b8e65922f63 ("mt76: add mac80211 driver for MT7615 PCIe-based chipsets")
Fixes:
d4bf77bd74930 ("mt76: mt7615: introduce mt7663u support to mt7615_write_txwi")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Nathan Chancellor [Mon, 18 Oct 2021 18:25:37 +0000 (11:25 -0700)]
platform/x86: thinkpad_acpi: Fix bitwise vs. logical warning
[ Upstream commit
fd96e35ea7b95f1e216277805be89d66e4ae962d ]
A new warning in clang points out a use of bitwise OR with boolean
expressions in this driver:
drivers/platform/x86/thinkpad_acpi.c:9061:11: error: use of bitwise '|' with boolean operands [-Werror,-Wbitwise-instead-of-logical]
else if ((strlencmp(cmd, "level disengaged") == 0) |
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
||
drivers/platform/x86/thinkpad_acpi.c:9061:11: note: cast one or both operands to int to silence this warning
1 error generated.
This should clearly be a logical OR so change it to fix the warning.
Fixes:
fe98a52ce754 ("ACPI: thinkpad-acpi: add sysfs support to fan subdriver")
Link: https://github.com/ClangBuiltLinux/linux/issues/1476
Reported-by: Tor Vic <torvic9@mailbox.org>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lore.kernel.org/r/20211018182537.2316800-1-nathan@kernel.org
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Christophe JAILLET [Sat, 16 Oct 2021 06:21:44 +0000 (08:21 +0200)]
mmc: mxs-mmc: disable regulator on error and in the remove function
[ Upstream commit
ce5f6c2c9b0fcb4094f8e162cfd37fb4294204f7 ]
The 'reg_vmmc' regulator is enabled in the probe. It is never disabled.
Neither in the error handling path of the probe nor in the remove
function.
Register a devm_action to disable it when needed.
Fixes:
4dc5a79f1350 ("mmc: mxs-mmc: enable regulator for mmc slot")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/4aadb3c97835f7b80f00819c3d549e6130384e67.1634365151.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sean Young [Wed, 13 Oct 2021 08:14:10 +0000 (09:14 +0100)]
media: ir_toy: assignment to be16 should be of correct type
[ Upstream commit
febfe985fc2ea052a363f6525ff624b8efd5273c ]
commit
f0c15b360fb6 ("media: ir_toy: prevent device from hanging during
transmit") removed a cpu_to_be16() cast, which causes a sparse warning.
Fixes:
f0c15b360fb6 ("media: ir_toy: prevent device from hanging during transmit")
Reported-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jakub Kicinski [Fri, 15 Oct 2021 13:37:39 +0000 (06:37 -0700)]
net: stream: don't purge sk_error_queue in sk_stream_kill_queues()
[ Upstream commit
24bcbe1cc69fa52dc4f7b5b2456678ed464724d8 ]
sk_stream_kill_queues() can be called on close when there are
still outstanding skbs to transmit. Those skbs may try to queue
notifications to the error queue (e.g. timestamps).
If sk_stream_kill_queues() purges the queue without taking
its lock the queue may get corrupted, and skbs leaked.
This shows up as a warning about an rmem leak:
WARNING: CPU: 24 PID: 0 at net/ipv4/af_inet.c:154 inet_sock_destruct+0x...
The leak is always a multiple of 0x300 bytes (the value is in
%rax on my builds, so RAX:
0000000000000300). 0x300 is truesize of
an empty sk_buff. Indeed if we dump the socket state at the time
of the warning the sk_error_queue is often (but not always)
corrupted. The ->next pointer points back at the list head,
but not the ->prev pointer. Indeed we can find the leaked skb
by scanning the kernel memory for something that looks like
an skb with ->sk = socket in question, and ->truesize = 0x300.
The contents of ->cb[] of the skb confirms the suspicion that
it is indeed a timestamp notification (as generated in
__skb_complete_tx_timestamp()).
Removing purging of sk_error_queue should be okay, since
inet_sock_destruct() does it again once all socket refs
are gone. Eric suggests this may cause sockets that go
thru disconnect() to maintain notifications from the
previous incarnations of the socket, but that should be
okay since the race was there anyway, and disconnect()
is not exactly dependable.
Thanks to Jonathan Lemon and Omar Sandoval for help at various
stages of tracing the issue.
Fixes:
cb9eff097831 ("net: new user space API for time stamping of incoming and outgoing packets")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dan Carpenter [Wed, 13 Oct 2021 08:13:15 +0000 (11:13 +0300)]
drm/msm: uninitialized variable in msm_gem_import()
[ Upstream commit
2203bd0e5c12ffc53ffdd4fbd7b12d6ba27e0424 ]
The msm_gem_new_impl() function cleans up after itself so there is no
need to call drm_gem_object_put(). Conceptually, it does not make sense
to call a kref_put() function until after the reference counting has
been initialized which happens immediately after this call in the
drm_gem_(private_)object_init() functions.
In the msm_gem_import() function the "obj" pointer is uninitialized, so
it will lead to a crash.
Fixes:
05b849111c07 ("drm/msm: prime support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20211013081315.GG6010@kili
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dan Carpenter [Mon, 4 Oct 2021 10:38:06 +0000 (13:38 +0300)]
drm/msm: potential error pointer dereference in init()
[ Upstream commit
b6816441a14bbe356ba8590de79cfea2de6a085c ]
The msm_iommu_new() returns error pointers on failure so check for that
to avoid an Oops.
Fixes:
ccac7ce373c1 ("drm/msm: Refactor address space initialization")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20211004103806.GD25015@kili
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Eric Dumazet [Thu, 14 Oct 2021 13:41:26 +0000 (06:41 -0700)]
tcp: switch orphan_count to bare per-cpu counters
[ Upstream commit
19757cebf0c5016a1f36f7fe9810a9f0b33c0832 ]
Use of percpu_counter structure to track count of orphaned
sockets is causing problems on modern hosts with 256 cpus
or more.
Stefan Bach reported a serious spinlock contention in real workloads,
that I was able to reproduce with a netfilter rule dropping
incoming FIN packets.
53.56% server [kernel.kallsyms] [k] queued_spin_lock_slowpath
|
---queued_spin_lock_slowpath
|
--53.51%--_raw_spin_lock_irqsave
|
--53.51%--__percpu_counter_sum
tcp_check_oom
|
|--39.03%--__tcp_close
| tcp_close
| inet_release
| inet6_release
| sock_close
| __fput
| ____fput
| task_work_run
| exit_to_usermode_loop
| do_syscall_64
| entry_SYSCALL_64_after_hwframe
| __GI___libc_close
|
--14.48%--tcp_out_of_resources
tcp_write_timeout
tcp_retransmit_timer
tcp_write_timer_handler
tcp_write_timer
call_timer_fn
expire_timers
__run_timers
run_timer_softirq
__softirqentry_text_start
As explained in commit
cf86a086a180 ("net/dst: use a smaller percpu_counter
batch for dst entries accounting"), default batch size is too big
for the default value of tcp_max_orphans (262144).
But even if we reduce batch sizes, there would still be cases
where the estimated count of orphans is beyond the limit,
and where tcp_too_many_orphans() has to call the expensive
percpu_counter_sum_positive().
One solution is to use plain per-cpu counters, and have
a timer to periodically refresh this cache.
Updating this cache every 100ms seems about right, tcp pressure
state is not radically changing over shorter periods.
percpu_counter was nice 15 years ago while hosts had less
than 16 cpus, not anymore by current standards.
v2: Fix the build issue for CONFIG_CRYPTO_DEV_CHELSIO_TLS=m,
reported by kernel test robot <lkp@intel.com>
Remove unused socket argument from tcp_too_many_orphans()
Fixes:
dd24c00191d5 ("net: Use a percpu_counter for orphan_count")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Stefan Bach <sfb@google.com>
Cc: Neal Cardwell <ncardwell@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Zhang Qiao [Wed, 15 Sep 2021 06:40:30 +0000 (14:40 +0800)]
kernel/sched: Fix sched_fork() access an invalid sched_task_group
[ Upstream commit
4ef0c5c6b5ba1f38f0ea1cedad0cad722f00c14a ]
There is a small race between copy_process() and sched_fork()
where child->sched_task_group point to an already freed pointer.
parent doing fork() | someone moving the parent
| to another cgroup
-------------------------------+-------------------------------
copy_process()
+ dup_task_struct()<1>
parent move to another cgroup,
and free the old cgroup. <2>
+ sched_fork()
+ __set_task_cpu()<3>
+ task_fork_fair()
+ sched_slice()<4>
In the worst case, this bug can lead to "use-after-free" and
cause panic as shown above:
(1) parent copy its sched_task_group to child at <1>;
(2) someone move the parent to another cgroup and free the old
cgroup at <2>;
(3) the sched_task_group and cfs_rq that belong to the old cgroup
will be accessed at <3> and <4>, which cause a panic:
[] BUG: unable to handle kernel NULL pointer dereference at
0000000000000000
[] PGD
8000001fa0a86067 P4D
8000001fa0a86067 PUD
2029955067 PMD 0
[] Oops: 0000 [#1] SMP PTI
[] CPU: 7 PID: 648398 Comm: ebizzy Kdump: loaded Tainted: G OE --------- - - 4.18.0.x86_64+ #1
[] RIP: 0010:sched_slice+0x84/0xc0
[] Call Trace:
[] task_fork_fair+0x81/0x120
[] sched_fork+0x132/0x240
[] copy_process.part.5+0x675/0x20e0
[] ? __handle_mm_fault+0x63f/0x690
[] _do_fork+0xcd/0x3b0
[] do_syscall_64+0x5d/0x1d0
[] entry_SYSCALL_64_after_hwframe+0x65/0xca
[] RIP: 0033:0x7f04418cd7e1
Between cgroup_can_fork() and cgroup_post_fork(), the cgroup
membership and thus sched_task_group can't change. So update child's
sched_task_group at sched_post_fork() and move task_fork() and
__set_task_cpu() (where accees the sched_task_group) from sched_fork()
to sched_post_fork().
Fixes:
8323f26ce342 ("sched: Fix race in task_group")
Signed-off-by: Zhang Qiao <zhangqiao22@huawei.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lkml.kernel.org/r/20210915064030.2231-1-zhangqiao22@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sven Eckelmann [Tue, 11 Jun 2019 17:21:31 +0000 (19:21 +0200)]
ath10k: fix max antenna gain unit
[ Upstream commit
0a491167fe0cf9f26062462de2a8688b96125d48 ]
Most of the txpower for the ath10k firmware is stored as twicepower (0.5 dB
steps). This isn't the case for max_antenna_gain - which is still expected
by the firmware as dB.
The firmware is converting it from dB to the internal (twicepower)
representation when it calculates the limits of a channel. This can be seen
in tpc_stats when configuring "12" as max_antenna_gain. Instead of the
expected 12 (6 dB), the tpc_stats shows 24 (12 dB).
Tested on QCA9888 and IPQ4019 with firmware 10.4-3.5.3-00057.
Fixes:
02256930d9b8 ("ath10k: use proper tx power unit")
Signed-off-by: Sven Eckelmann <seckelmann@datto.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20190611172131.6064-1-sven@narfation.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Zev Weiss [Tue, 28 Sep 2021 09:22:38 +0000 (02:22 -0700)]
hwmon: (pmbus/lm25066) Let compiler determine outer dimension of lm25066_coeff
[ Upstream commit
b7931a7b0e0df4d2a25fedd895ad32c746b77bc1 ]
Maintaining this manually is error prone (there are currently only
five chips supported, not six); gcc can do it for us automatically.
Signed-off-by: Zev Weiss <zev@bewilderbeest.net>
Fixes:
666c14906b49 ("hwmon: (pmbus/lm25066) Drop support for LM25063")
Link: https://lore.kernel.org/r/20210928092242.30036-5-zev@bewilderbeest.net
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yang Yingliang [Tue, 12 Oct 2021 11:27:58 +0000 (19:27 +0800)]
hwmon: Fix possible memleak in __hwmon_device_register()
[ Upstream commit
ada61aa0b1184a8fda1a89a340c7d6cc4e59aee5 ]
I got memory leak as follows when doing fault injection test:
unreferenced object 0xffff888102740438 (size 8):
comm "27", pid 859, jiffies
4295031351 (age 143.992s)
hex dump (first 8 bytes):
68 77 6d 6f 6e 30 00 00 hwmon0..
backtrace:
[<
00000000544b5996>] __kmalloc_track_caller+0x1a6/0x300
[<
00000000df0d62b9>] kvasprintf+0xad/0x140
[<
00000000d3d2a3da>] kvasprintf_const+0x62/0x190
[<
000000005f8f0f29>] kobject_set_name_vargs+0x56/0x140
[<
00000000b739e4b9>] dev_set_name+0xb0/0xe0
[<
0000000095b69c25>] __hwmon_device_register+0xf19/0x1e50 [hwmon]
[<
00000000a7e65b52>] hwmon_device_register_with_info+0xcb/0x110 [hwmon]
[<
000000006f181e86>] devm_hwmon_device_register_with_info+0x85/0x100 [hwmon]
[<
0000000081bdc567>] tmp421_probe+0x2d2/0x465 [tmp421]
[<
00000000502cc3f8>] i2c_device_probe+0x4e1/0xbb0
[<
00000000f90bda3b>] really_probe+0x285/0xc30
[<
000000007eac7b77>] __driver_probe_device+0x35f/0x4f0
[<
000000004953d43d>] driver_probe_device+0x4f/0x140
[<
000000002ada2d41>] __device_attach_driver+0x24c/0x330
[<
00000000b3977977>] bus_for_each_drv+0x15d/0x1e0
[<
000000005bf2a8e3>] __device_attach+0x267/0x410
When device_register() returns an error, the name allocated in
dev_set_name() will be leaked, the put_device() should be used
instead of calling hwmon_dev_release() to give up the device
reference, then the name will be freed in kobject_cleanup().
Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes:
bab2243ce189 ("hwmon: Introduce hwmon_device_register_with_groups")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20211012112758.2681084-1-yangyingliang@huawei.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Daniel Borkmann [Mon, 11 Oct 2021 12:12:35 +0000 (14:12 +0200)]
net, neigh: Fix NTF_EXT_LEARNED in combination with NTF_USE
[ Upstream commit
e4400bbf5b15750e1b59bf4722d18d99be60c69f ]
The NTF_EXT_LEARNED neigh flag is usually propagated back to user space
upon dump of the neighbor table. However, when used in combination with
NTF_USE flag this is not the case despite exempting the entry from the
garbage collector. This results in inconsistent state since entries are
typically marked in neigh->flags with NTF_EXT_LEARNED, but here they are
not. Fix it by propagating the creation flag to ___neigh_create().
Before fix:
# ./ip/ip n replace 192.168.178.30 dev enp5s0 use extern_learn
# ./ip/ip n
192.168.178.30 dev enp5s0 lladdr f4:8c:50:5e:71:9a REACHABLE
[...]
After fix:
# ./ip/ip n replace 192.168.178.30 dev enp5s0 use extern_learn
# ./ip/ip n
192.168.178.30 dev enp5s0 lladdr f4:8c:50:5e:71:9a extern_learn REACHABLE
[...]
Fixes:
9ce33e46531d ("neighbour: support for NTF_EXT_LEARNED flag")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Roopa Prabhu <roopa@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dan Carpenter [Mon, 11 Oct 2021 12:39:12 +0000 (15:39 +0300)]
memstick: jmb38x_ms: use appropriate free function in jmb38x_ms_alloc_host()
[ Upstream commit
beae4a6258e64af609ad5995cc6b6056eb0d898e ]
The "msh" pointer is device managed, meaning that memstick_alloc_host()
calls device_initialize() on it. That means that it can't be free
using kfree() but must instead be freed with memstick_free_host().
Otherwise it leads to a tiny memory leak of device resources.
Fixes:
60fdd931d577 ("memstick: add support for JMicron jmb38x MemoryStick host controller")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20211011123912.GD15188@kili
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Arnd Bergmann [Mon, 27 Sep 2021 09:44:47 +0000 (11:44 +0200)]
memstick: avoid out-of-range warning
[ Upstream commit
4853396f03c3019eccf5cd113e464231e9ddf0b3 ]
clang-14 complains about a sanity check that always passes when the
page size is 64KB or larger:
drivers/memstick/core/ms_block.c:1739:21: error: result of comparison of constant 65536 with expression of type 'unsigned short' is always false [-Werror,-Wtautological-constant-out-of-range-compare]
if (msb->page_size > PAGE_SIZE) {
~~~~~~~~~~~~~~ ^ ~~~~~~~~~
This is fine, it will still work on all architectures, so just shut
up that warning with a cast.
Fixes:
0ab30494bc4f ("memstick: add support for legacy memorysticks")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20210927094520.696665-1-arnd@kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Tony Lindgren [Tue, 21 Sep 2021 11:00:26 +0000 (14:00 +0300)]
mmc: sdhci-omap: Fix context restore
[ Upstream commit
d806e334d0390502cd2a820ad33d65d7f9bba618 ]
We need to restore context in a specified order with HCTL set in two
phases. This is similar to what omap_hsmmc_context_restore() is doing.
Otherwise SDIO can stop working on resume.
And for PM runtime and SDIO cards, we need to also save SYSCTL, IE and
ISE.
This should not be a problem currently, and these patches can be applied
whenever suitable.
Fixes:
ee0f309263a6 ("mmc: sdhci-omap: Add Support for Suspend/Resume")
Signed-off-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20210921110029.21944-3-tony@atomide.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Tony Lindgren [Tue, 21 Sep 2021 11:00:25 +0000 (14:00 +0300)]
mmc: sdhci-omap: Fix NULL pointer exception if regulator is not configured
[ Upstream commit
8e0e7bd38b1ec7f9e5d18725ad41828be4e09859 ]
If sdhci-omap is configured for an unused device instance and the device
is not set as disabled, we can get a NULL pointer dereference:
Unable to handle kernel NULL pointer dereference at virtual address
00000045
...
(regulator_set_voltage) from [<
c07d7008>] (mmc_regulator_set_ocr+0x44/0xd0)
(mmc_regulator_set_ocr) from [<
c07e2d80>] (sdhci_set_ios+0xa4/0x490)
(sdhci_set_ios) from [<
c07ea690>] (sdhci_omap_set_ios+0x124/0x160)
(sdhci_omap_set_ios) from [<
c07c8e94>] (mmc_power_up.part.0+0x3c/0x154)
(mmc_power_up.part.0) from [<
c07c9d20>] (mmc_start_host+0x88/0x9c)
(mmc_start_host) from [<
c07cad34>] (mmc_add_host+0x58/0x7c)
(mmc_add_host) from [<
c07e2574>] (__sdhci_add_host+0xf0/0x22c)
(__sdhci_add_host) from [<
c07eaf68>] (sdhci_omap_probe+0x318/0x72c)
(sdhci_omap_probe) from [<
c06a39d8>] (platform_probe+0x58/0xb8)
AFAIK we are not seeing this with the devices configured in the mainline
kernel but this can cause issues for folks bringing up their boards.
Fixes:
7d326930d352 ("mmc: sdhci-omap: Add OMAP SDHCI driver")
Signed-off-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20210921110029.21944-2-tony@atomide.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
John Fraker [Mon, 11 Oct 2021 15:36:47 +0000 (08:36 -0700)]
gve: Recover from queue stall due to missed IRQ
[ Upstream commit
87a7f321bb6a45e54b7d6c90d032ee5636a6ad97 ]
Don't always reset the driver on a TX timeout. Attempt to
recover by kicking the queue in case an IRQ was missed.
Fixes:
9e5f7d26a4c08 ("gve: Add workqueue and reset support")
Signed-off-by: John Fraker <jfraker@google.com>
Signed-off-by: David Awogbemila <awogbemila@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dan Carpenter [Wed, 6 Oct 2021 07:36:22 +0000 (10:36 +0300)]
b43: fix a lower bounds test
[ Upstream commit
9b793db5fca44d01f72d3564a168171acf7c4076 ]
The problem is that "channel" is an unsigned int, when it's less 5 the
value of "channel - 5" is not a negative number as one would expect but
is very high positive value instead.
This means that "start" becomes a very high positive value. The result
of that is that we never enter the "for (i = start; i <= end; i++) {"
loop. Instead of storing the result from b43legacy_radio_aci_detect()
it just uses zero.
Fixes:
ef1a628d83fc ("b43: Implement dynamic PHY API")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Michael Büsch <m@bues.ch>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20211006073621.GE8404@kili
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dan Carpenter [Wed, 6 Oct 2021 07:35:42 +0000 (10:35 +0300)]
b43legacy: fix a lower bounds test
[ Upstream commit
c1c8380b0320ab757e60ed90efc8b1992a943256 ]
The problem is that "channel" is an unsigned int, when it's less 5 the
value of "channel - 5" is not a negative number as one would expect but
is very high positive value instead.
This means that "start" becomes a very high positive value. The result
of that is that we never enter the "for (i = start; i <= end; i++) {"
loop. Instead of storing the result from b43legacy_radio_aci_detect()
it just uses zero.
Fixes:
75388acd0cd8 ("[B43LEGACY]: add mac80211-based driver for legacy BCM43xx devices")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Michael Büsch <m@bues.ch>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20211006073542.GD8404@kili
Signed-off-by: Sasha Levin <sashal@kernel.org>
Markus Schneider-Pargmann [Thu, 30 Sep 2021 19:12:42 +0000 (21:12 +0200)]
hwrng: mtk - Force runtime pm ops for sleep ops
[ Upstream commit
b6f5f0c8f72d348b2d07b20d7b680ef13a7ffe98 ]
Currently mtk_rng_runtime_suspend/resume is called for both runtime pm
and system sleep operations.
This is wrong as these should only be runtime ops as the name already
suggests. Currently freezing the system will lead to a call to
mtk_rng_runtime_suspend even if the device currently isn't active. This
leads to a clock warning because it is disabled/unprepared although it
isn't enabled/prepared currently.
This patch fixes this by only setting the runtime pm ops and forces to
call the runtime pm ops from the system sleep ops as well if active but
not otherwise.
Fixes:
81d2b34508c6 ("hwrng: mtk - add runtime PM support")
Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Giovanni Cabiddu [Tue, 28 Sep 2021 11:44:30 +0000 (12:44 +0100)]
crypto: qat - disregard spurious PFVF interrupts
[ Upstream commit
18fcba469ba5359c1de7e3fb16f7b9e8cd1b8e02 ]
Upon receiving a PFVF message, check if the interrupt bit is set in the
message. If it is not, that means that the interrupt was probably
triggered by a collision. In this case, disregard the message and
re-enable the interrupts.
Fixes:
ed8ccaef52fa ("crypto: qat - Add support for SRIOV")
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Marco Chiappero <marco.chiappero@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Giovanni Cabiddu [Tue, 28 Sep 2021 11:44:29 +0000 (12:44 +0100)]
crypto: qat - detect PFVF collision after ACK
[ Upstream commit
9b768e8a3909ac1ab39ed44a3933716da7761a6f ]
Detect a PFVF collision between the local and the remote function by
checking if the message on the PFVF CSR has been overwritten.
This is done after the remote function confirms that the message has
been received, by clearing the interrupt bit, or the maximum number of
attempts (ADF_IOV_MSG_ACK_MAX_RETRY) to check the CSR has been exceeded.
Fixes:
ed8ccaef52fa ("crypto: qat - Add support for SRIOV")
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Co-developed-by: Marco Chiappero <marco.chiappero@intel.com>
Signed-off-by: Marco Chiappero <marco.chiappero@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Evgeny Novikov [Sun, 22 Aug 2021 09:48:03 +0000 (11:48 +0200)]
media: dvb-frontends: mn88443x: Handle errors of clk_prepare_enable()
[ Upstream commit
69a10678e2fba3d182e78ea041f2d1b1a6058764 ]
mn88443x_cmn_power_on() did not handle possible errors of
clk_prepare_enable() and always finished successfully so that its caller
mn88443x_probe() did not care about failed preparing/enabling of clocks
as well.
Add missed error handling in both mn88443x_cmn_power_on() and
mn88443x_probe(). This required to change the return value of the former
from "void" to "int".
Found by Linux Driver Verification project (linuxtesting.org).
Fixes:
0f408ce8941f ("media: dvb-frontends: add Socionext MN88443x ISDB-S/T demodulator driver")
Signed-off-by: Evgeny Novikov <novikov@ispras.ru>
Co-developed-by: Kirill Shilimanov <kirill.shilimanov@huawei.com>
Signed-off-by: Kirill Shilimanov <kirill.shilimanov@huawei.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Pablo Neira Ayuso [Sat, 25 Sep 2021 20:40:26 +0000 (22:40 +0200)]
netfilter: nft_dynset: relax superfluous check on set updates
[ Upstream commit
7b1394892de8d95748d05e3ee41e85edb4abbfa1 ]
Relax this condition to make add and update commands idempotent for sets
with no timeout. The eval function already checks if the set element
timeout is available and updates it if the update command is used.
Fixes:
22fe54d5fefc ("netfilter: nf_tables: add support for dynamic set updates")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Peter Zijlstra [Tue, 28 Sep 2021 08:40:21 +0000 (10:40 +0200)]
rcu: Always inline rcu_dynticks_task*_{enter,exit}()
[ Upstream commit
7663ad9a5dbcc27f3090e6bfd192c7e59222709f ]
RCU managed to grow a few noinstr violations:
vmlinux.o: warning: objtool: rcu_dynticks_eqs_enter()+0x0: call to rcu_dynticks_task_trace_enter() leaves .noinstr.text section
vmlinux.o: warning: objtool: rcu_dynticks_eqs_exit()+0xe: call to rcu_dynticks_task_trace_exit() leaves .noinstr.text section
Fix them by adding __always_inline to the relevant trivial functions.
Also replace the noinstr with __always_inline for the existing
rcu_dynticks_task_*() functions since noinstr would force noinline
them, even when empty, which seems silly.
Fixes:
7d0c9c50c5a1 ("rcu-tasks: Avoid IPIing userspace/idle tasks if kernel is so built")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yazen Ghannam [Tue, 5 Oct 2021 15:44:19 +0000 (15:44 +0000)]
EDAC/amd64: Handle three rank interleaving mode
[ Upstream commit
9f4873fb6af7966de8fcbd95c36b61351c1c4b1f ]
AMD Rome systems and later support interleaving between three identical
ranks within a channel.
Check for this mode by counting the number of enabled chip selects and
comparing their masks. If there are exactly three enabled chip selects
and their masks are identical, then three rank interleaving is enabled.
The size of a rank is determined from its mask value. However, three
rank interleaving doesn't follow the method of swapping an interleave
bit with the most significant bit. Rather, the interleave bit is flipped
and the most significant bit remains the same. There is only a single
interleave bit in this case.
Account for this when determining the chip select size by keeping the
most significant bit at its original value and ignoring any zero bits.
This will return a full bitmask in [MSB:1].
Fixes:
e53a3b267fb0 ("EDAC/amd64: Find Chip Select memory size using Address Mask")
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20211005154419.2060504-1-yazen.ghannam@amd.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Vincent Donnefort [Wed, 8 Sep 2021 14:05:22 +0000 (15:05 +0100)]
PM: EM: Fix inefficient states detection
[ Upstream commit
aa1a43262ad5df010768f69530fa179ff81651d3 ]
Currently, a debug message is printed if an inefficient state is detected
in the Energy Model. Unfortunately, it won't detect if the first state is
inefficient or if two successive states are. Fix this behavior.
Fixes:
27871f7a8a34 (PM: Introduce an Energy Model management framework)
Signed-off-by: Vincent Donnefort <vincent.donnefort@arm.com>
Reviewed-by: Quentin Perret <qperret@google.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Linus Lüssing [Tue, 5 Oct 2021 13:55:53 +0000 (16:55 +0300)]
ath9k: Fix potential interrupt storm on queue reset
[ Upstream commit
4925642d541278575ad1948c5924d71ffd57ef14 ]
In tests with two Lima boards from 8devices (QCA4531 based) on OpenWrt
19.07 we could force a silent restart of a device with no serial
output when we were sending a high amount of UDP traffic (iperf3 at 80
MBit/s in both directions from external hosts, saturating the wifi and
causing a load of about 4.5 to 6) and were then triggering an
ath9k_queue_reset().
Further debugging showed that the restart was caused by the ath79
watchdog. With disabled watchdog we could observe that the device was
constantly going into ath_isr() interrupt handler and was returning
early after the ATH_OP_HW_RESET flag test, without clearing any
interrupts. Even though ath9k_queue_reset() calls
ath9k_hw_kill_interrupts().
With JTAG we could observe the following race condition:
1) ath9k_queue_reset()
...
-> ath9k_hw_kill_interrupts()
-> set_bit(ATH_OP_HW_RESET, &common->op_flags);
...
<- returns
2) ath9k_tasklet()
...
-> ath9k_hw_resume_interrupts()
...
<- returns
3) loops around:
...
handle_int()
-> ath_isr()
...
-> if (test_bit(ATH_OP_HW_RESET,
&common->op_flags))
return IRQ_HANDLED;
x) ath_reset_internal():
=> never reached <=
And in ath_isr() we would typically see the following interrupts /
interrupt causes:
* status: 0x00111030 or 0x00110030
* async_cause: 2 (AR_INTR_MAC_IPQ)
* sync_cause: 0
So the ath9k_tasklet() reenables the ath9k interrupts
through ath9k_hw_resume_interrupts() which ath9k_queue_reset() had just
disabled. And ath_isr() then keeps firing because it returns IRQ_HANDLED
without actually clearing the interrupt.
To fix this IRQ storm also clear/disable the interrupts again when we
are in reset state.
Cc: Sven Eckelmann <sven@narfation.org>
Cc: Simon Wunderlich <sw@simonwunderlich.de>
Cc: Linus Lüssing <linus.luessing@c0d3.blue>
Fixes:
872b5d814f99 ("ath9k: do not access hardware on IRQs during reset")
Signed-off-by: Linus Lüssing <ll@simonwunderlich.de>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210914192515.9273-3-linus.luessing@c0d3.blue
Signed-off-by: Sasha Levin <sashal@kernel.org>
Colin Ian King [Fri, 17 Sep 2021 16:07:02 +0000 (18:07 +0200)]
media: em28xx: Don't use ops->suspend if it is NULL
[ Upstream commit
51fa3b70d27342baf1ea8aaab3e96e5f4f26d5b2 ]
The call to ops->suspend for the dev->dev_next case can currently
trigger a call on a null function pointer if ops->suspend is null.
Skip over the use of function ops->suspend if it is null.
Addresses-Coverity: ("Dereference after null check")
Fixes:
be7fd3c3a8c5 ("media: em28xx: Hauppauge DualHD second tuner functionality")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Anel Orazgaliyeva [Mon, 6 Sep 2021 18:34:40 +0000 (18:34 +0000)]
cpuidle: Fix kobject memory leaks in error paths
[ Upstream commit
e5f5a66c9aa9c331da5527c2e3fd9394e7091e01 ]
Commit
c343bf1ba5ef ("cpuidle: Fix three reference count leaks")
fixes the cleanup of kobjects; however, it removes kfree() calls
altogether, leading to memory leaks.
Fix those and also defer the initialization of dev->kobj_dev until
after the error check, so that we do not end up with a dangling
pointer.
Fixes:
c343bf1ba5ef ("cpuidle: Fix three reference count leaks")
Signed-off-by: Anel Orazgaliyeva <anelkz@amazon.de>
Suggested-by: Aman Priyadarshi <apeureka@amazon.de>
[ rjw: Subject edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Arnd Bergmann [Mon, 20 Sep 2021 10:05:35 +0000 (12:05 +0200)]
crypto: ecc - fix CRYPTO_DEFAULT_RNG dependency
[ Upstream commit
38aa192a05f22f9778f9420e630f0322525ef12e ]
The ecc.c file started out as part of the ECDH algorithm but got
moved out into a standalone module later. It does not build without
CRYPTO_DEFAULT_RNG, so now that other modules are using it as well we
can run into this link error:
aarch64-linux-ld: ecc.c:(.text+0xfc8): undefined reference to `crypto_default_rng'
aarch64-linux-ld: ecc.c:(.text+0xff4): undefined reference to `crypto_put_default_rng'
Move the 'select CRYPTO_DEFAULT_RNG' statement into the correct symbol.
Fixes:
0d7a78643f69 ("crypto: ecrdsa - add EC-RDSA (GOST 34.10) algorithm")
Fixes:
4e6602916bc6 ("crypto: ecdsa - Add support for ECDSA signature verification")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Punit Agrawal [Tue, 14 Sep 2021 14:38:37 +0000 (23:38 +0900)]
kprobes: Do not use local variable when creating debugfs file
[ Upstream commit
8f7262cd66699a4b02eb7549b35c81b2116aad95 ]
debugfs_create_file() takes a pointer argument that can be used during
file operation callbacks (accessible via i_private in the inode
structure). An obvious requirement is for the pointer to refer to
valid memory when used.
When creating the debugfs file to dynamically enable / disable
kprobes, a pointer to local variable is passed to
debugfs_create_file(); which will go out of scope when the init
function returns. The reason this hasn't triggered random memory
corruption is because the pointer is not accessed during the debugfs
file callbacks.
Since the enabled state is managed by the kprobes_all_disabled global
variable, the local variable is not needed. Fix the incorrect (and
unnecessary) usage of local variable during debugfs_file_create() by
passing NULL instead.
Link: https://lkml.kernel.org/r/163163031686.489837.4476867635937014973.stgit@devnote2
Fixes:
bf8f6e5b3e51 ("Kprobes: The ON/OFF knob thru debugfs")
Signed-off-by: Punit Agrawal <punitagrawal@gmail.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Colin Ian King [Wed, 4 Aug 2021 08:50:10 +0000 (10:50 +0200)]
media: cx23885: Fix snd_card_free call on null card pointer
[ Upstream commit
7266dda2f1dfe151b12ef0c14eb4d4e622fb211c ]
Currently a call to snd_card_new that fails will set card with a NULL
pointer, this causes a null pointer dereference on the error cleanup
path when card it passed to snd_card_free. Fix this by adding a new
error exit path that does not call snd_card_free and exiting via this
new path.
Addresses-Coverity: ("Explicit null dereference")
Fixes:
9e44d63246a9 ("[media] cx23885: Add ALSA support")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kees Cook [Tue, 3 Aug 2021 19:46:10 +0000 (21:46 +0200)]
media: tm6000: Avoid card name truncation
[ Upstream commit
42bb98e420d454fef3614b70ea11cc59068395f6 ]
The "card" string only holds 31 characters (and the terminating NUL).
In order to avoid truncation, use a shorter card description instead of
the current result, "Trident TVMaster TM5600/6000/60".
Suggested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Fixes:
e28f49b0b2a8 ("V4L/DVB: tm6000: fix some info messages")
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kees Cook [Tue, 3 Aug 2021 19:46:09 +0000 (21:46 +0200)]
media: si470x: Avoid card name truncation
[ Upstream commit
2908249f3878a591f7918368fdf0b7b0a6c3158c ]
The "card" string only holds 31 characters (and the terminating NUL).
In order to avoid truncation, use a shorter card description instead of
the current result, "Silicon Labs Si470x FM Radio Re".
Suggested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Fixes:
78656acdcf48 ("V4L/DVB (7038): USB radio driver for Silicon Labs Si470x FM Radio Receivers")
Fixes:
cc35bbddfe10 ("V4L/DVB (12416): radio-si470x: add i2c driver for si470x")
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kees Cook [Tue, 3 Aug 2021 19:46:08 +0000 (21:46 +0200)]
media: radio-wl1273: Avoid card name truncation
[ Upstream commit
dfadec236aa99f6086141949c9dc3ec50f3ff20d ]
The "card" string only holds 31 characters (and the terminating NUL).
In order to avoid truncation, use a shorter card description instead of
the current result, "Texas Instruments Wl1273 FM Rad".
Suggested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Fixes:
87d1a50ce451 ("[media] V4L2: WL1273 FM Radio: TI WL1273 FM radio driver")
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Christophe JAILLET [Thu, 19 Aug 2021 20:21:25 +0000 (22:21 +0200)]
media: mtk-vpu: Fix a resource leak in the error handling path of 'mtk_vpu_probe()'
[ Upstream commit
2143ad413c05c7be24c3a92760e367b7f6aaac92 ]
A successful 'clk_prepare()' call should be balanced by a corresponding
'clk_unprepare()' call in the error handling path of the probe, as already
done in the remove function.
Update the error handling path accordingly.
Fixes:
3003a180ef6b ("[media] VPU: mediatek: support Mediatek VPU")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Houlong Wei <houlong.wei@mediatek.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Tom Rix [Thu, 12 Aug 2021 17:00:43 +0000 (19:00 +0200)]
media: TDA1997x: handle short reads of hdmi info frame.
[ Upstream commit
48d219f9cc667bc6fbc3e3af0b1bfd75db94fce4 ]
Static analysis reports this representative problem
tda1997x.c:1939: warning: 7th function call argument is an uninitialized
value
The 7th argument is buffer[0], which is set in the earlier call to
io_readn(). When io_readn() call to io_read() fails with the first
read, buffer[0] is not set and 0 is returned and stored in len.
The later call to hdmi_infoframe_unpack()'s size parameter is the
static size of buffer, always 40, so a short read is not caught
in hdmi_infoframe_unpacks()'s checking. The variable len should be
used instead.
Zero initialize buffer to 0 so it is in a known start state.
Fixes:
9ac0038db9a7 ("media: i2c: Add TDA1997x HDMI receiver driver")
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ricardo Ribalda [Fri, 18 Jun 2021 12:29:06 +0000 (14:29 +0200)]
media: v4l2-ioctl: S_CTRL output the right value
[ Upstream commit
c87ed93574e3cd8346c05bd934c617596c12541b ]
If the driver does not implement s_ctrl, but it does implement
s_ext_ctrls, we convert the call.
When that happens we have also to convert back the response from
s_ext_ctrls.
Fixes v4l2_compliance:
Control ioctls (Input 0):
fail: v4l2-test-controls.cpp(411): returned control value out of range
fail: v4l2-test-controls.cpp(507): invalid control
00980900
test VIDIOC_G/S_CTRL: FAIL
Fixes:
35ea11ff8471 ("V4L/DVB (8430): videodev: move some functions from v4l2-dev.h to v4l2-common.h or v4l2-ioctl.h")
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Pavel Skripkin [Fri, 13 Aug 2021 14:34:20 +0000 (16:34 +0200)]
media: dvb-usb: fix ununit-value in az6027_rc_query
[ Upstream commit
afae4ef7d5ad913cab1316137854a36bea6268a5 ]
Syzbot reported ununit-value bug in az6027_rc_query(). The problem was
in missing state pointer initialization. Since this function does nothing
we can simply initialize state to REMOTE_NO_KEY_PRESSED.
Reported-and-tested-by: syzbot+2cd8c5db4a85f0a04142@syzkaller.appspotmail.com
Fixes:
76f9a820c867 ("V4L/DVB: AZ6027: Initial import of the driver")
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Colin Ian King [Tue, 20 Jul 2021 16:07:49 +0000 (18:07 +0200)]
media: cxd2880-spi: Fix a null pointer dereference on error handling path
[ Upstream commit
11b982e950d2138e90bd120501df10a439006ff8 ]
Currently the null pointer check on dvb_spi->vcc_supply is inverted and
this leads to only null values of the dvb_spi->vcc_supply being passed
to the call of regulator_disable causing null pointer dereferences.
Fix this by only calling regulator_disable if dvb_spi->vcc_supply is
not null.
Addresses-Coverity: ("Dereference after null check")
Fixes:
dcb014582101 ("media: cxd2880-spi: Fix an error handling path")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Pavel Skripkin [Thu, 29 Jul 2021 20:23:33 +0000 (22:23 +0200)]
media: em28xx: add missing em28xx_close_extension
[ Upstream commit
2c98b8a3458df03abdc6945bbef67ef91d181938 ]
If em28xx dev has ->dev_next pointer, we need to delete ->dev_next list
node from em28xx_extension_devlist on disconnect to avoid UAF bugs and
corrupted list bugs, since driver frees this pointer on disconnect.
Reported-and-tested-by: syzbot+a6969ef522a36d3344c9@syzkaller.appspotmail.com
Fixes:
1a23f81b7dc3 ("V4L/DVB (9979): em28xx: move usb probe code to a proper place")
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Arnd Bergmann [Mon, 27 Sep 2021 12:58:10 +0000 (14:58 +0200)]
drm/amdgpu: fix warning for overflow check
[ Upstream commit
335aea75b0d95518951cad7c4c676e6f1c02c150 ]
The overflow check in amdgpu_bo_list_create() causes a warning with
clang-14 on 64-bit architectures, since the limit can never be
exceeded.
drivers/gpu/drm/amd/amdgpu/amdgpu_bo_list.c:74:18: error: result of comparison of constant
256204778801521549 with expression of type 'unsigned int' is always false [-Werror,-Wtautological-constant-out-of-range-compare]
if (num_entries > (SIZE_MAX - sizeof(struct amdgpu_bo_list))
~~~~~~~~~~~ ^ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
The check remains useful for 32-bit architectures, so just avoid the
warning by using size_t as the type for the count.
Fixes:
920990cb080a ("drm/amdgpu: allocate the bo_list array after the list")
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sudarshan Rajagopalan [Tue, 28 Sep 2021 18:51:49 +0000 (11:51 -0700)]
arm64: mm: update max_pfn after memory hotplug
[ Upstream commit
8fac67ca236b961b573355e203dbaf62a706a2e5 ]
After new memory blocks have been hotplugged, max_pfn and max_low_pfn
needs updating to reflect on new PFNs being hot added to system.
Without this patch, debug-related functions that use max_pfn such as
get_max_dump_pfn() or read_page_owner() will not work with any page in
memory that is hot-added after boot.
Fixes:
4ab215061554 ("arm64: Add memory hotplug support")
Signed-off-by: Sudarshan Rajagopalan <quic_sudaraja@quicinc.com>
Signed-off-by: Chris Goldsworthy <quic_cgoldswo@quicinc.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Georgi Djakov <quic_c_gdjako@quicinc.com>
Tested-by: Georgi Djakov <quic_c_gdjako@quicinc.com>
Link: https://lore.kernel.org/r/a51a27ee7be66024b5ce626310d673f24107bcb8.1632853776.git.quic_cgoldswo@quicinc.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Matthew Auld [Mon, 27 Sep 2021 11:41:02 +0000 (12:41 +0100)]
drm/ttm: stop calling tt_swapin in vm_access
[ Upstream commit
f5d28856b89baab4232a9f841e565763fcebcdf9 ]
In commit:
commit
09ac4fcb3f255e9225967c75f5893325c116cdbe
Author: Felix Kuehling <Felix.Kuehling@amd.com>
Date: Thu Jul 13 17:01:16 2017 -0400
drm/ttm: Implement vm_operations_struct.access v2
we added the vm_access hook, where we also directly call tt_swapin for
some reason. If something is swapped-out then the ttm_tt must also be
unpopulated, and since access_kmap should also call tt_populate, if
needed, then swapping-in will already be handled there.
If anything, calling tt_swapin directly here would likely always fail
since the tt->pages won't yet be populated, or worse since the tt->pages
array is never actually cleared in unpopulate this might lead to a nasty
uaf.
Fixes:
09ac4fcb3f25 ("drm/ttm: Implement vm_operations_struct.access v2")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Christian König <christian.koenig@amd.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210927114114.152310-1-matthew.auld@intel.com
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Fabio Estevam [Tue, 28 Sep 2021 11:00:47 +0000 (14:00 +0300)]
ath10k: sdio: Add missing BH locking around napi_schdule()
[ Upstream commit
019edd01d174ce4bb2e517dd332922514d176601 ]
On a i.MX-based board with a QCA9377 Wifi chip, the following errors
are seen after launching the 'hostapd' application:
hostapd /etc/wifi.conf
Configuration file: /etc/wifi.conf
wlan0: interface state UNINITIALIZED->COUNTRY_UPDATE
NOHZ tick-stop error: Non-RCU local softirq work is pending, handler #08!!!
Using interface wlan0 with hwaddr 00:1f:7b:31:04:a0 and ssid "thessid"
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
wlan0: interface state COUNTRY_UPDATE->ENABLED
wlan0: AP-ENABLED
NOHZ tick-stop error: Non-RCU local softirq work is pending, handler #08!!!
NOHZ tick-stop error: Non-RCU local softirq work is pending, handler #08!!!
NOHZ tick-stop error: Non-RCU local softirq work is pending, handler #08!!!
NOHZ tick-stop error: Non-RCU local softirq work is pending, handler #08!!!
...
Fix this problem by adding the BH locking around napi-schedule(),
in the same way it was done in commit
e63052a5dd3c ("mlx5e: add
add missing BH locking around napi_schdule()").
Its commit log provides the following explanation:
"It's not correct to call napi_schedule() in pure process
context. Because we use __raise_softirq_irqoff() we require
callers to be in a context which will eventually lead to
softirq handling (hardirq, bh disabled, etc.).
With code as is users will see:
NOHZ tick-stop error: Non-RCU local softirq work is pending, handler #08!!!
"
Fixes:
cfee8793a74d ("ath10k: enable napi on RX path for sdio")
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210824144339.2796122-1-festevam@denx.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
Loic Poulain [Tue, 28 Sep 2021 11:00:47 +0000 (14:00 +0300)]
ath10k: Fix missing frame timestamp for beacon/probe-resp
[ Upstream commit
e6dfbc3ba90cc2b619229be56b485f085a0a8e1c ]
When receiving a beacon or probe response, we should update the
boottime_ns field which is the timestamp the frame was received at.
(cf mac80211.h)
This fixes a scanning issue with Android since it relies on this
timestamp to determine when the AP has been seen for the last time
(via the nl80211 BSS_LAST_SEEN_BOOTTIME parameter).
Fixes:
5e3dd157d7e7 ("ath10k: mac80211 driver for Qualcomm Atheros 802.11ac CQA98xx devices")
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1629811733-7927-1-git-send-email-loic.poulain@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Baochen Qiang [Tue, 28 Sep 2021 11:00:44 +0000 (14:00 +0300)]
ath11k: Fix memory leak in ath11k_qmi_driver_event_work
[ Upstream commit
72de799aa9e3e064b35238ef053d2f0a49db055a ]
The buffer pointed to by event is not freed in case
ATH11K_FLAG_UNREGISTERING bit is set, resulting in
memory leak, so fix it.
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1
Fixes:
d5c65159f289 ("ath11k: driver for Qualcomm IEEE 802.11ax devices")
Signed-off-by: Baochen Qiang <bqiang@codeaurora.org>
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210913180246.193388-4-jouni@codeaurora.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Pradeep Kumar Chitrapu [Tue, 28 Sep 2021 11:00:43 +0000 (14:00 +0300)]
ath11k: fix packet drops due to incorrect 6 GHz freq value in rx status
[ Upstream commit
9d6ae1f5cf733c0e8d7f904c501fd015c4b9f0f4 ]
Frequency in rx status is being filled incorrectly in the 6 GHz band as
channel number received is invalid in this case which is causing packet
drops. So fix that.
Fixes:
5dcf42f8b79d ("ath11k: Use freq instead of channel number in rx path")
Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org>
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210722102054.43419-2-jouni@codeaurora.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sriram R [Tue, 28 Sep 2021 09:05:40 +0000 (12:05 +0300)]
ath11k: Avoid race during regd updates
[ Upstream commit
1db2b0d0a39102238fcbf9092cefa65a710642e9 ]
Whenever ath11k is bootup with a user country already set, cfg80211
notifies this country info to ath11k soon after registration, where the
notification is sent to the firmware for fetching the rules of this user
country input.
Multiple race conditions could be seen in this scenario where a new
request is either lost as pointed in [1] or a new regd overwrites the
default regd provided by the firmware during bootup. Note that, the
default regd is used for intersection purpose and hence it should not be
overwritten.
The main reason as pointed by [1] is the usage of ATH11K_FLAG_REGISTERED
flag which is updated after completion of core registration, whereas the
reg notification from cfg80211 and wmi events for the corresponding
request can happen much before that. Since the ATH11K_FLAG_REGISTERED is
currently used to determine if the event containing reg rules belong to
default regd or for user request, there is a possibility of the default
regd getting overwritten.
Since the default reg rules will be received only once per pdev on
firmware load, the above flag based check can be replaced with a check
to see if default_regd is already set, so that we can now always update
the new_regd. Also if the new_regd is set, this will be always used to
update the reg rules for the registered phy.
[1] https://patchwork.kernel.org/project/linux-wireless/patch/1829665.1PRlr7bOQj@ripper/
Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-01460-QCAHKSWPL_SILICONZ-1
Fixes:
d5c65159f289 ("ath11k: driver for Qualcomm IEEE 802.11ax devices")
Signed-off-by: Sriram R <srirrama@codeaurora.org>
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210721212029.142388-4-jouni@codeaurora.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dan Carpenter [Tue, 28 Sep 2021 09:05:43 +0000 (12:05 +0300)]
ath11k: fix some sleeping in atomic bugs
[ Upstream commit
aadf7c81a0771b8f1c97dabca6a48bae1b387779 ]
The ath11k_dbring_bufs_replenish() and ath11k_dbring_fill_bufs()
take a "gfp" parameter but they since they take spinlocks, the
allocations they do have to be atomic. This causes a bug because
ath11k_dbring_buf_setup passes GFP_KERNEL for the gfp flags.
The fix is to use GFP_ATOMIC and remove the unused parameters.
Fixes:
bd6478559e27 ("ath11k: Add direct buffer ring support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210812070434.GE31863@kili
Signed-off-by: Sasha Levin <sashal@kernel.org>
Linus Walleij [Sat, 25 Sep 2021 22:59:27 +0000 (00:59 +0200)]
net: dsa: rtl8366rb: Fix off-by-one bug
[ Upstream commit
5f5f12f5d4b108399130bb5c11f07765851d9cdb ]
The max VLAN number with non-4K VLAN activated is 15, and the
range is 0..15. Not 16.
The impact should be low since we by default have 4K VLAN and
thus have 4095 VLANs to play with in this switch. There will
not be a problem unless the code is rewritten to only use
16 VLANs.
Fixes:
d8652956cf37 ("net: dsa: realtek-smi: Add Realtek SMI driver")
Cc: Mauri Sandberg <sandberg@mailfence.com>
Cc: DENG Qingfang <dqfext@gmail.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jiasheng Jiang [Fri, 24 Sep 2021 03:18:37 +0000 (03:18 +0000)]
rxrpc: Fix _usecs_to_jiffies() by using usecs_to_jiffies()
[ Upstream commit
acde891c243c1ed85b19d4d5042bdf00914f5739 ]
Directly using _usecs_to_jiffies() might be unsafe, so it's
better to use usecs_to_jiffies() instead.
Because we can see that the result of _usecs_to_jiffies()
could be larger than MAX_JIFFY_OFFSET values without the
check of the input.
Fixes:
c410bf01933e ("Fix the excessive initial retransmission timeout")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Michael Walle [Wed, 15 Sep 2021 22:03:07 +0000 (00:03 +0200)]
crypto: caam - disable pkc for non-E SoCs
[ Upstream commit
f20311cc9c58052e0b215013046cbf390937910c ]
On newer CAAM versions, not all accelerators are disabled if the SoC is
a non-E variant. While the driver checks most of the modules for
availability, there is one - PKHA - which sticks out. On non-E variants
it is still reported as available, that is the number of instances is
non-zero, but it has limited functionality. In particular it doesn't
support encryption and decryption, but just signing and verifying. This
is indicated by a bit in the PKHA_MISC field. Take this bit into account
if we are checking for availability.
This will the following error:
[ 8.167817] caam_jr 8020000.jr:
20000b0f: CCB: desc idx 11: : Invalid CHA selected.
Tested on an NXP LS1028A (non-E) SoC.
Fixes:
d239b10d4ceb ("crypto: caam - add register map changes cf. Era 10")
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dinghao Liu [Wed, 22 Sep 2021 13:49:45 +0000 (21:49 +0800)]
Bluetooth: btmtkuart: fix a memleak in mtk_hci_wmt_sync
[ Upstream commit
3e5f2d90c28f9454e421108554707620bc23269d ]
bdev->evt_skb will get freed in the normal path and one error path
of mtk_hci_wmt_sync, while the other error paths do not free it,
which may cause a memleak. This bug is suggested by a static analysis
tool, please advise.
Fixes:
e0b67035a90b ("Bluetooth: mediatek: update the common setup between MT7622 and other devices")
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ajay Singh [Thu, 16 Sep 2021 16:49:18 +0000 (16:49 +0000)]
wilc1000: fix possible memory leak in cfg_scan_result()
[ Upstream commit
3c719fed0f3a5e95b1d164609ecc81c4191ade70 ]
When the BSS reference holds a valid reference, it is not freed. The 'if'
condition is wrong. Instead of the 'if (bss)' check, the 'if (!bss)' check
is used.
The issue is solved by removing the unnecessary 'if' check because
cfg80211_put_bss() already performs the NULL validation.
Fixes:
6cd4fa5ab691 ("staging: wilc1000: make use of cfg80211_inform_bss_frame()")
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210916164902.74629-3-ajay.kathat@microchip.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Bryan O'Donoghue [Thu, 9 Sep 2021 14:44:27 +0000 (15:44 +0100)]
wcn36xx: Fix Antenna Diversity Switching
[ Upstream commit
701668d3bfa03dabc5095fc383d5315544ee5b31 ]
We have been tracking a strange bug with Antenna Diversity Switching (ADS)
on wcn3680b for a while.
ADS is configured like this:
A. Via a firmware configuration table baked into the NV area.
1. Defines if ADS is enabled.
2. Defines which GPIOs are connected to which antenna enable pin.
3. Defines which antenna/GPIO is primary and which is secondary.
B. WCN36XX_CFG_VAL(ANTENNA_DIVERSITY, N)
N is a bitmask of available antenna.
Setting N to 3 indicates a bitmask of enabled antenna (1 | 2).
Obviously then we can set N to 1 or N to 2 to fix to a particular
antenna and disable antenna diversity.
C. WCN36XX_CFG_VAL(ASD_PROBE_INTERVAL, XX)
XX is the number of beacons between each antenna RSSI check.
Setting this value to 50 means, every 50 received beacons, run the
ADS algorithm.
D. WCN36XX_CFG_VAL(ASD_TRIGGER_THRESHOLD, YY)
YY is a two's complement integer which specifies the RSSI decibel
threshold below which ADS will run.
We default to -60db here, meaning a measured RSSI <= -60db will
trigger an ADS probe.
E. WCN36XX_CFG_VAL(ASD_RTT_RSSI_HYST_THRESHOLD, Z)
Z is a hysteresis value, indicating a delta which the RSSI must
exceed for the antenna switch to be valid.
For example if HYST_THRESHOLD == 3 AntennaId1-RSSI == -60db and
AntennaId-2-RSSI == -58db then firmware will not switch antenna.
The threshold needs to be -57db or better to satisfy the criteria.
F. A firmware feature bit also exists ANTENNA_DIVERSITY_SELECTION.
This feature bit is used by the firmware to report if
ANTENNA_DIVERSITY_SELECTION is supported. The host is not required to
toggle this bit to enable or disable ADS.
ADS works like this:
A. Every XX beacons the firmware switches to or remains on the primary
antenna.
B. The firmware then sends a Request-To-Send (RTS) packet to the AP.
C. The firmware waits for a Clear-To-Send (CTS) response from the AP.
D. The firmware then notes the received RSSI on the CTS packet.
E. The firmware then repeats steps A-D on the secondary antenna.
F. Subsequently if the RSSI on the measured antenna is better than
ASD_TRIGGER_THRESHOLD + the active antenna's RSSI then the
measured antenna becomes the active antenna.
G. If RSSI rises past ASD_TRIGGER_THRESHOLD then ADS doesn't run at
all even if there is a substantially better RSSI on the alternative
antenna.
What we have been observing is that the RTS packet is being sent but the
MAC address is a byte-swapped version of the target MAC. The ADS/RTS MAC is
corrupted only when the link is encrypted, if the AP is open the RTS MAC is
correct. Similarly if we configure the firmware to an RTS/CTS sequence for
regular data - the transmitted RTS MAC is correctly formatted.
Internally the wcn36xx firmware uses the indexes in the SMD commands to
populate and extract data from specific entries in an STA lookup table. The
AP's MAC appears a number of times in different indexes within this lookup
table, so the MAC address extracted for the data-transmit RTS and the MAC
address extracted for the ADS/RTS packet are not the same STA table index.
Our analysis indicates the relevant firmware STA table index is
"bssSelfStaIdx".
There is an STA populate function responsible for formatting the MAC
address of the bssSelfStaIdx including byte-swapping the MAC address.
Its clear then that the required STA populate command did not run for
bssSelfStaIdx.
So taking a look at the sequence of SMD commands sent to the firmware we
see the following downstream when moving from an unencrypted to encrypted
BSS setup.
- WLAN_HAL_CONFIG_BSS_REQ
- WLAN_HAL_CONFIG_STA_REQ
- WLAN_HAL_SET_STAKEY_REQ
Upstream in wcn36xx we have
- WLAN_HAL_CONFIG_BSS_REQ
- WLAN_HAL_SET_STAKEY_REQ
The solution then is to add the missing WLAN_HAL_CONFIG_STA_REQ between
WLAN_HAL_CONFIG_BSS_REQ and WLAN_HAL_SET_STAKEY_REQ.
No surprise WLAN_HAL_CONFIG_STA_REQ is the routine responsible for
populating the STA lookup table in the firmware and once done the MAC sent
by the ADS routine is in the correct byte-order.
This bug is apparent with ADS but it is also the case that any other
firmware routine that depends on the "bssSelfStaIdx" would retrieve
malformed data on an encrypted link.
Fixes:
3e977c5c523d ("wcn36xx: Define wcn3680 specific firmware parameters")
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Tested-by: Benjamin Li <benl@squareup.com>
Reviewed-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210909144428.2564650-2-bryan.odonoghue@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Waiman Long [Sat, 18 Sep 2021 22:53:08 +0000 (18:53 -0400)]
cgroup: Make rebind_subsystems() disable v2 controllers all at once
[ Upstream commit
7ee285395b211cad474b2b989db52666e0430daf ]
It was found that the following warning was displayed when remounting
controllers from cgroup v2 to v1:
[ 8042.997778] WARNING: CPU: 88 PID: 80682 at kernel/cgroup/cgroup.c:3130 cgroup_apply_control_disable+0x158/0x190
:
[ 8043.091109] RIP: 0010:cgroup_apply_control_disable+0x158/0x190
[ 8043.096946] Code: ff f6 45 54 01 74 39 48 8d 7d 10 48 c7 c6 e0 46 5a a4 e8 7b 67 33 00 e9 41 ff ff ff 49 8b 84 24 e8 01 00 00 0f b7 40 08 eb 95 <0f> 0b e9 5f ff ff ff 48 83 c4 08 5b 5d 41 5c 41 5d 41 5e 41 5f c3
[ 8043.115692] RSP: 0018:
ffffba8a47c23d28 EFLAGS:
00010202
[ 8043.120916] RAX:
0000000000000036 RBX:
ffffffffa624ce40 RCX:
000000000000181a
[ 8043.128047] RDX:
ffffffffa63c43e0 RSI:
ffffffffa63c43e0 RDI:
ffff9d7284ee1000
[ 8043.135180] RBP:
ffff9d72874c5800 R08:
ffffffffa624b090 R09:
0000000000000004
[ 8043.142314] R10:
ffffffffa624b080 R11:
0000000000002000 R12:
ffff9d7284ee1000
[ 8043.149447] R13:
ffff9d7284ee1000 R14:
ffffffffa624ce70 R15:
ffffffffa6269e20
[ 8043.156576] FS:
00007f7747cff740(0000) GS:
ffff9d7a5fc00000(0000) knlGS:
0000000000000000
[ 8043.164663] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 8043.170409] CR2:
00007f7747e96680 CR3:
0000000887d60001 CR4:
00000000007706e0
[ 8043.177539] DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
[ 8043.184673] DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
[ 8043.191804] PKRU:
55555554
[ 8043.194517] Call Trace:
[ 8043.196970] rebind_subsystems+0x18c/0x470
[ 8043.201070] cgroup_setup_root+0x16c/0x2f0
[ 8043.205177] cgroup1_root_to_use+0x204/0x2a0
[ 8043.209456] cgroup1_get_tree+0x3e/0x120
[ 8043.213384] vfs_get_tree+0x22/0xb0
[ 8043.216883] do_new_mount+0x176/0x2d0
[ 8043.220550] __x64_sys_mount+0x103/0x140
[ 8043.224474] do_syscall_64+0x38/0x90
[ 8043.228063] entry_SYSCALL_64_after_hwframe+0x44/0xae
It was caused by the fact that rebind_subsystem() disables
controllers to be rebound one by one. If more than one disabled
controllers are originally from the default hierarchy, it means that
cgroup_apply_control_disable() will be called multiple times for the
same default hierarchy. A controller may be killed by css_kill() in
the first round. In the second round, the killed controller may not be
completely dead yet leading to the warning.
To avoid this problem, we collect all the ssid's of controllers that
needed to be disabled from the default hierarchy and then disable them
in one go instead of one by one.
Fixes:
334c3679ec4b ("cgroup: reimplement rebind_subsystems() using cgroup_apply_control() and friends")
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yajun Deng [Sat, 18 Sep 2021 09:04:10 +0000 (17:04 +0800)]
net: net_namespace: Fix undefined member in key_remove_domain()
[ Upstream commit
aed0826b0cf2e488900ab92193893e803d65c070 ]
The key_domain member in struct net only exists if we define CONFIG_KEYS.
So we should add the define when we used key_domain.
Fixes:
9b242610514f ("keys: Network namespace domain tag")
Signed-off-by: Yajun Deng <yajun.deng@linux.dev>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sebastian Andrzej Siewior [Fri, 3 Sep 2021 08:40:01 +0000 (10:40 +0200)]
lockdep: Let lock_is_held_type() detect recursive read as read
[ Upstream commit
2507003a1d10917c9158077bf6030719d02c941e ]
lock_is_held_type(, 1) detects acquired read locks. It only recognized
locks acquired with lock_acquire_shared(). Read locks acquired with
lock_acquire_shared_recursive() are not recognized because a `2' is
stored as the read value.
Rework the check to additionally recognise lock's read value one and two
as a read held lock.
Fixes:
e918188611f07 ("locking: More accurate annotations for read_lock()")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Boqun Feng <boqun.feng@gmail.com>
Acked-by: Waiman Long <longman@redhat.com>
Link: https://lkml.kernel.org/r/20210903084001.lblecrvz4esl4mrr@linutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
liuyuntao [Sat, 28 Aug 2021 10:43:21 +0000 (18:43 +0800)]
virtio-gpu: fix possible memory allocation failure
[ Upstream commit
5bd4f20de8acad37dbb3154feb34dbc36d506c02 ]
When kmem_cache_zalloc in virtio_gpu_get_vbuf fails, it will return
an error code. But none of its callers checks this error code, and
a core dump will take place.
Considering many of its callers can't handle such error, I add
a __GFP_NOFAIL flag when calling kmem_cache_zalloc to make sure
it won't fail, and delete those unused error handlings.
Fixes:
dc5698e80cf724 ("Add virtio gpu driver.")
Signed-off-by: Yuntao Liu <liuyuntao10@huawei.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20210828104321.3410312-1-liuyuntao10@huawei.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Iago Toral Quiroga [Wed, 15 Sep 2021 10:05:07 +0000 (12:05 +0200)]
drm/v3d: fix wait for TMU write combiner flush
[ Upstream commit
e4f868191138975f2fdf2f37c11318b47db4acc9 ]
The hardware sets the TMUWCF bit back to 0 when the TMU write
combiner flush completes so we should be checking for that instead
of the L2TFLS bit.
v2 (Melissa Wen):
- Add Signed-off-by and Fixes tags.
- Change the error message for the timeout to be more clear.
Fixes spurious Vulkan CTS failures in:
dEQP-VK.binding_model.descriptorset_random.*
Fixes:
d223f98f02099 ("drm/v3d: Add support for compute shader dispatch.")
Signed-off-by: Iago Toral Quiroga <itoral@igalia.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Melissa Wen <melissa.srw@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210915100507.3945-1-itoral@igalia.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Peter Zijlstra [Fri, 26 Mar 2021 15:12:05 +0000 (16:12 +0100)]
objtool: Fix static_call list generation
[ Upstream commit
a958c4fea768d2c378c89032ab41d38da2a24422 ]
Currently, objtool generates tail call entries in add_jump_destination()
but waits until validate_branch() to generate the regular call entries.
Move these to add_call_destination() for consistency.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Link: https://lkml.kernel.org/r/20210326151259.691529901@infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Peter Zijlstra [Thu, 24 Jun 2021 09:41:00 +0000 (11:41 +0200)]
x86/xen: Mark cpu_bringup_and_idle() as dead_end_function
[ Upstream commit
9af9dcf11bda3e2c0e24c1acaacb8685ad974e93 ]
The asm_cpu_bringup_and_idle() function is required to push the return
value on the stack in order to make ORC happy, but the only reason
objtool doesn't complain is because of a happy accident.
The thing is that asm_cpu_bringup_and_idle() doesn't return, so
validate_branch() never terminates and falls through to the next
function, which in the normal case is the hypercall_page. And that, as
it happens, is 4095 NOPs and a RET.
Make asm_cpu_bringup_and_idle() terminate on it's own, by making the
function it calls as a dead-end. This way we no longer rely on what
code happens to come after.
Fixes:
c3881eb58d56 ("x86/xen: Make the secondary CPU idle tasks reliable")
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Link: https://lore.kernel.org/r/20210624095147.693801717@infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Josh Poimboeuf [Thu, 21 Jan 2021 21:29:25 +0000 (15:29 -0600)]
objtool: Add xen_start_kernel() to noreturn list
[ Upstream commit
c26acfbbfbc2ae4167e33825793e85e1a53058d8 ]
xen_start_kernel() doesn't return. Annotate it as such so objtool can
follow the code flow.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/r/930deafa89256c60b180442df59a1bbae48f30ab.1611263462.git.jpoimboe@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Aleksander Jan Bajkowski [Tue, 14 Sep 2021 21:21:00 +0000 (23:21 +0200)]
MIPS: lantiq: dma: fix burst length for DEU
[ Upstream commit
5ad74d39c51dd41b3c819f4f5396655f0629b4fd ]
The current definition of 2W burst length is invalid.
This patch fixes it. Current downstream DEU driver doesn't
use DMA. An incorrect burst length value doesn't cause any
errors. This patch also adds other burst length values.
Fixes:
dfec1a827d2b ("MIPS: Lantiq: Add DMA support")
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Neeraj Upadhyay [Wed, 18 Aug 2021 08:04:00 +0000 (13:34 +0530)]
rcu: Fix existing exp request check in sync_sched_exp_online_cleanup()
[ Upstream commit
f0b2b2df5423fb369ac762c77900bc7765496d58 ]
The sync_sched_exp_online_cleanup() checks to see if RCU needs
an expedited quiescent state from the incoming CPU, sending it
an IPI if so. Before sending IPI, it checks whether expedited
qs need has been already requested for the incoming CPU, by
checking rcu_data.cpu_no_qs.b.exp for the current cpu, on which
sync_sched_exp_online_cleanup() is running. This works for the
case where incoming CPU is same as self. However, for the case
where incoming CPU is different from self, expedited request
won't get marked, which can potentially delay reporting of
expedited quiescent state for the incoming CPU.
Fixes:
e015a3411220 ("rcu: Avoid self-IPI in sync_sched_exp_online_cleanup()")
Signed-off-by: Neeraj Upadhyay <neeraju@codeaurora.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Desmond Cheong Zhi Xi [Fri, 3 Sep 2021 03:13:06 +0000 (23:13 -0400)]
Bluetooth: fix init and cleanup of sco_conn.timeout_work
[ Upstream commit
49d8a5606428ca0962d09050a5af81461ff90fbb ]
Before freeing struct sco_conn, all delayed timeout work should be
cancelled. Otherwise, sco_sock_timeout could potentially use the
sco_conn after it has been freed.
Additionally, sco_conn.timeout_work should be initialized when the
connection is allocated, not when the channel is added. This is
because an sco_conn can create channels with multiple sockets over its
lifetime, which happens if sockets are released but the connection
isn't deleted.
Fixes:
ba316be1b6a0 ("Bluetooth: schedule SCO timeouts with delayed_work")
Signed-off-by: Desmond Cheong Zhi Xi <desmondcheongzx@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>