review.tizen.org Git - platform/kernel/linux-starfive.git/log

cxl/pmu: Ensure put_device on pmu devices

[ Upstream commit ef3d5cf9c59cccb012aa6b93d99f4c6eb5d6648e ]

The following kmemleaks were detected when removing the cxl module
stack:

unreferenced object 0xffff88822616b800 (size 1024):
...
  backtrace:
    [<00000000bedc6f83>] kmalloc_trace+0x26/0x90
    [<00000000448d1afc>] devm_cxl_pmu_add+0x3a/0x110 [cxl_core]
    [<00000000ca3bfe16>] 0xffffffffa105213b
    [<00000000ba7f78dc>] local_pci_probe+0x41/0x90
    [<000000005bb027ac>] pci_device_probe+0xb0/0x1c0
...
unreferenced object 0xffff8882260abcc0 (size 16):
...
  hex dump (first 16 bytes):
    70 6d 75 5f 6d 65 6d 30 2e 30 00 26 82 88 ff ff  pmu_mem0.0.&....
  backtrace:
...
    [<00000000152b5e98>] dev_set_name+0x43/0x50
    [<00000000c228798b>] devm_cxl_pmu_add+0x102/0x110 [cxl_core]
    [<00000000ca3bfe16>] 0xffffffffa105213b
    [<00000000ba7f78dc>] local_pci_probe+0x41/0x90
    [<000000005bb027ac>] pci_device_probe+0xb0/0x1c0
...
unreferenced object 0xffff8882272af200 (size 256):
...
  backtrace:
    [<00000000bedc6f83>] kmalloc_trace+0x26/0x90
    [<00000000a14d1813>] device_add+0x4ea/0x890
    [<00000000a3f07b47>] devm_cxl_pmu_add+0xbe/0x110 [cxl_core]
    [<00000000ca3bfe16>] 0xffffffffa105213b
    [<00000000ba7f78dc>] local_pci_probe+0x41/0x90
    [<000000005bb027ac>] pci_device_probe+0xb0/0x1c0
...

devm_cxl_pmu_add() correctly registers a device remove function but it
only calls device_del() which is only part of device unregistration.

Properly call device_unregister() to free up the memory associated with
the device.

Fixes: 1ad3f701c399 ("cxl/pci: Find and register CXL PMU devices")
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20231016-pmu-unregister-fix-v1-1-1e2eb2fa3c69@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: prevent mss overflow in skb_segment()

[ Upstream commit 23d05d563b7e7b0314e65c8e882bc27eac2da8e7 ]

Once again syzbot is able to crash the kernel in skb_segment() [1]

GSO_BY_FRAGS is a forbidden value, but unfortunately the following
computation in skb_segment() can reach it quite easily :

mss = mss * partial_segs;

65535 = 3 * 5 * 17 * 257, so many initial values of mss can lead to
a bad final result.

Make sure to limit segmentation so that the new mss value is smaller
than GSO_BY_FRAGS.

[1]

general protection fault, probably for non-canonical address 0xdffffc000000000e: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000070-0x0000000000000077]
CPU: 1 PID: 5079 Comm: syz-executor993 Not tainted 6.7.0-rc4-syzkaller-00141-g1ae4cd3cbdd0 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 11/10/2023
RIP: 0010:skb_segment+0x181d/0x3f30 net/core/skbuff.c:4551
Code: 83 e3 02 e9 fb ed ff ff e8 90 68 1c f9 48 8b 84 24 f8 00 00 00 48 8d 78 70 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <0f> b6 04 02 84 c0 74 08 3c 03 0f 8e 8a 21 00 00 48 8b 84 24 f8 00
RSP: 0018:ffffc900043473d0 EFLAGS: 00010202
RAX: dffffc0000000000 RBX: 0000000000010046 RCX: ffffffff886b1597
RDX: 000000000000000e RSI: ffffffff886b2520 RDI: 0000000000000070
RBP: ffffc90004347578 R08: 0000000000000005 R09: 000000000000ffff
R10: 000000000000ffff R11: 0000000000000002 R12: ffff888063202ac0
R13: 0000000000010000 R14: 000000000000ffff R15: 0000000000000046
FS: 0000555556e7e380(0000) GS:ffff8880b9900000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020010000 CR3: 0000000027ee2000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
udp6_ufo_fragment+0xa0e/0xd00 net/ipv6/udp_offload.c:109
ipv6_gso_segment+0x534/0x17e0 net/ipv6/ip6_offload.c:120
skb_mac_gso_segment+0x290/0x610 net/core/gso.c:53
__skb_gso_segment+0x339/0x710 net/core/gso.c:124
skb_gso_segment include/net/gso.h:83 [inline]
validate_xmit_skb+0x36c/0xeb0 net/core/dev.c:3626
__dev_queue_xmit+0x6f3/0x3d60 net/core/dev.c:4338
dev_queue_xmit include/linux/netdevice.h:3134 [inline]
packet_xmit+0x257/0x380 net/packet/af_packet.c:276
packet_snd net/packet/af_packet.c:3087 [inline]
packet_sendmsg+0x24c6/0x5220 net/packet/af_packet.c:3119
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg+0xd5/0x180 net/socket.c:745
__sys_sendto+0x255/0x340 net/socket.c:2190
__do_sys_sendto net/socket.c:2202 [inline]
__se_sys_sendto net/socket.c:2198 [inline]
__x64_sys_sendto+0xe0/0x1b0 net/socket.c:2198
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0x40/0x110 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x63/0x6b
RIP: 0033:0x7f8692032aa9
Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 d1 19 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007fff8d685418 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007f8692032aa9
RDX: 0000000000010048 RSI: 00000000200000c0 RDI: 0000000000000003
RBP: 00000000000f4240 R08: 0000000020000540 R09: 0000000000000014
R10: 0000000000000000 R11: 0000000000000246 R12: 00007fff8d685480
R13: 0000000000000001 R14: 00007fff8d685480 R15: 0000000000000003
</TASK>
Modules linked in:
---[ end trace 0000000000000000 ]---
RIP: 0010:skb_segment+0x181d/0x3f30 net/core/skbuff.c:4551
Code: 83 e3 02 e9 fb ed ff ff e8 90 68 1c f9 48 8b 84 24 f8 00 00 00 48 8d 78 70 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <0f> b6 04 02 84 c0 74 08 3c 03 0f 8e 8a 21 00 00 48 8b 84 24 f8 00
RSP: 0018:ffffc900043473d0 EFLAGS: 00010202
RAX: dffffc0000000000 RBX: 0000000000010046 RCX: ffffffff886b1597
RDX: 000000000000000e RSI: ffffffff886b2520 RDI: 0000000000000070
RBP: ffffc90004347578 R08: 0000000000000005 R09: 000000000000ffff
R10: 000000000000ffff R11: 0000000000000002 R12: ffff888063202ac0
R13: 0000000000010000 R14: 000000000000ffff R15: 0000000000000046
FS: 0000555556e7e380(0000) GS:ffff8880b9900000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020010000 CR3: 0000000027ee2000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400

Fixes: 3953c46c3ac7 ("sk_buff: allow segmenting based on frag sizes")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20231212164621.4131800-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/pseries/vas: Migration suspend waits for no in-progress open windows

[ Upstream commit 0cf72f7f14d12cb065c3d01954cf42fc5638aa69 ]

The hypervisor returns migration failure if all VAS windows are not
closed. During pre-migration stage, vas_migration_handler() sets
migration_in_progress flag and closes all windows from the list.
The allocate VAS window routine checks the migration flag, setup
the window and then add it to the list. So there is possibility of
the migration handler missing the window that is still in the
process of setup.

t1: Allocate and open VAS t2: Migration event
    window

lock vas_pseries_mutex
If migration_in_progress set
  unlock vas_pseries_mutex
  return
open window HCALL
unlock vas_pseries_mutex
Modify window HCALL lock vas_pseries_mutex
setup window migration_in_progress=true
Closes all windows from the list
// May miss windows that are
// not in the list
unlock vas_pseries_mutex
lock vas_pseries_mutex return
if nr_closed_windows == 0
  // No DLPAR CPU or migration
  add window to the list
  // Window will be added to the
  // list after the setup is completed
  unlock vas_pseries_mutex
  return
unlock vas_pseries_mutex
Close VAS window
// due to DLPAR CPU or migration
return -EBUSY

This patch resolves the issue with the following steps:
- Set the migration_in_progress flag without holding mutex.
- Introduce nr_open_wins_progress counter in VAS capabilities
  struct
- This counter tracks the number of open windows are still in
  progress
- The allocate setup window thread closes windows if the migration
  is set and decrements nr_open_window_progress counter
- The migration handler waits for no in-progress open windows.

The code flow with the fix is as follows:

t1: Allocate and open VAS       t2: Migration event
    window

lock vas_pseries_mutex
If migration_in_progress set
   unlock vas_pseries_mutex
   return
open window HCALL
nr_open_wins_progress++
// Window opened, but not
// added to the list yet
unlock vas_pseries_mutex
Modify window HCALL migration_in_progress=true
setup window lock vas_pseries_mutex
Closes all windows from the list
While nr_open_wins_progress {
    unlock vas_pseries_mutex
lock vas_pseries_mutex     sleep
if nr_closed_windows == 0     // Wait if any open window in
or migration is not started     // progress. The open window
   // No DLPAR CPU or migration     // thread closes the window without
   add window to the list     // adding to the list and return if
   nr_open_wins_progress--     // the migration is in progress.
   unlock vas_pseries_mutex
   return
Close VAS window
nr_open_wins_progress--
unlock vas_pseries_mutex
return -EBUSY     lock vas_pseries_mutex
}
unlock vas_pseries_mutex
return

Fixes: 37e6764895ef ("powerpc/pseries/vas: Add VAS migration handler")
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20231125235104.3405008-1-haren@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

RISCV: KVM: update external interrupt atomically for IMSIC swfile

[ Upstream commit 4ad9843e1ea088bd2529290234c6c4c6374836a7 ]

The emulated IMSIC update the external interrupt pending depending on
the value of eidelivery and topei. It might lose an interrupt when it
is interrupted before setting the new value to the pending status.

For example, when VCPU0 sends an IPI to VCPU1 via IMSIC:

VCPU0                           VCPU1

                                CSRSWAP topei = 0
                                The VCPU1 has claimed all the external
                                interrupt in its interrupt handler.

                                topei of VCPU1's IMSIC = 0

set pending in VCPU1's IMSIC

topei of VCPU1' IMSIC = 1

set the external interrupt
pending of VCPU1

                                clear the external interrupt pending
                                of VCPU1

When the VCPU1 switches back to VS mode, it exits the interrupt handler
because the result of CSRSWAP topei is 0. If there are no other external
interrupts injected into the VCPU1's IMSIC, VCPU1 will never know this
pending interrupt unless it initiative read the topei.

If the interruption occurs between updating interrupt pending in IMSIC
and updating external interrupt pending of VCPU, it will not cause a
problem. Suppose that the VCPU1 clears the IPI pending in IMSIC right
after VCPU0 sets the pending, the external interrupt pending of VCPU1
will not be set because the topei is 0. But when the VCPU1 goes back to
VS mode, the pending IPI will be reported by the CSRSWAP topei, it will
not lose this interrupt.

So we only need to make the external interrupt updating procedure as a
critical section to avoid the problem.

Fixes: db8b7e97d613 ("RISC-V: KVM: Add in-kernel virtualization of AIA IMSIC")
Tested-by: Roy Lin <roy.lin@sifive.com>
Tested-by: Wayling Chen <wayling.chen@sifive.com>
Co-developed-by: Vincent Chen <vincent.chen@sifive.com>
Signed-off-by: Vincent Chen <vincent.chen@sifive.com>
Signed-off-by: Yong-Xuan Wang <yongxuan.wang@sifive.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dmaengine: fsl-edma: fix wrong pointer check in fsl_edma3_attach_pd()

[ Upstream commit bffa7218dcddb80e7f18dfa545dd4b359b11dd93 ]

device_link_add() returns NULL pointer not PTR_ERR() when it fails,
so replace the IS_ERR() check with NULL pointer check.

Fixes: 72f5801a4e2b ("dmaengine: fsl-edma: integrate v3 support")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20231129090000.841440-1-yangyingliang@huaweicloud.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dmaengine: idxd: Protect int_handle field in hw descriptor

[ Upstream commit 778dfacc903d4b1ef5b7a9726e3a36bc15913d29 ]

The int_handle field in hw descriptor should also be protected
by wmb() before possibly triggering a DMA read.

Fixes: eb0cf33a91b4 (dmaengine: idxd: move interrupt handle assignment)
Signed-off-by: Guanjun <guanjun@linux.alibaba.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Fenghua Yu <fenghua.yu@intel.com>
Reviewed-by: Lijun Pan <lijun.pan@intel.com>
Link: https://lore.kernel.org/r/20231211053704.2725417-2-guanjun@linux.alibaba.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/display: Increase frame warning limit with KASAN or KCSAN in dml

[ Upstream commit 5b750b22530fe53bf7fd6a30baacd53ada26911b ]

Does the same thing as:
commit 6740ec97bcdb ("drm/amd/display: Increase frame warning limit with KASAN or KCSAN in dml2")

Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202311302107.hUDXVyWT-lkp@intel.com/
Fixes: 67e38874b85b ("drm/amd/display: Increase num voltage states to 40")
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Alvin Lee <alvin.lee2@amd.com>
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Cc: Samson Tam <samson.tam@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

kernel/resource: Increment by align value in get_free_mem_region()

[ Upstream commit 659aa050a53817157b7459529538598a6449c1d3 ]

Currently get_free_mem_region() searches for available capacity
in increments equal to the region size being requested. This can
cause the search to take giant steps through the resource leaving
needless gaps and missing available space.

Specifically 'cxl create-region' fails with ERANGE even though capacity
of the given size and CXL's expected 256M x InterleaveWays alignment can
be satisfied.

Replace the total-request-size increment with a next alignment increment
so that the next possible address is always examined for availability.

Fixes: 14b80582c43e ("resource: Introduce alloc_free_mem_region()")
Reported-by: Dmytro Adamenko <dmytro.adamenko@intel.com>
Reported-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20231113221324.1118092-1-alison.schofield@intel.com
Cc: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cxl/core: Always hold region_rwsem while reading poison lists

[ Upstream commit 5558b92e8d39e18aa19619be2ee37274e9592528 ]

A read of a device poison list is triggered via a sysfs attribute
and the results are logged as kernel trace events of type cxl_poison.
The work is managed by either: a) the region driver when one of more
regions map the device, or by b) the memdev driver when no regions
map the device.

In the case of a) the region driver holds the region_rwsem while
reading the poison by committed endpoint decoder mappings and for
any unmapped resources. This makes sure that the cxl_poison trace
event trace reports valid region info. (Region name, HPA, and UUID).

In the case of b) the memdev driver holds the dpa_rwsem preventing
new DPA resources from being attached to a region. However, it leaves
a gap between region attach and decoder commit actions. If a DPA in
the gap is in the poison list, the cxl_poison trace event will omit
the region info.

Close the gap by holding the region_rwsem and the dpa_rwsem when
reading poison per memdev. Since both methods now hold both locks,
down_read both from the caller. Doing so also addresses the lockdep
assert that found this issue:
Commit 458ba8189cb4 ("cxl: Add cxl_decoders_committed() helper")

Fixes: f0832a586396 ("cxl/region: Provide region info to the cxl_poison trace event")
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/08e8e7ec9a3413b91d51de39e385653494b1eed0.1701041440.git.alison.schofield@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cxl: Add cxl_decoders_committed() helper

[ Upstream commit 458ba8189cb4380aa6a6cc4d52ab067f80a64829 ]

Add a helper to retrieve the number of decoders committed for the port.
Replace all the open coding of the calculation with the helper.

Link: https://lore.kernel.org/linux-cxl/651c98472dfed_ae7e729495@dwillia2-xfh.jf.intel.com.notmuch/
Suggested-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Jim Harris <jim.harris@samsung.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Link: https://lore.kernel.org/r/169747906849.272156.1729290904857372335.stgit@djiang5-mobl3
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Stable-dep-of: 5558b92e8d39 ("cxl/core: Always hold region_rwsem while reading poison lists")
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/display: Increase num voltage states to 40

[ Upstream commit 67e38874b85b8df7b23d29f78ac3d7ecccd9519d ]

[Description]
If during driver init stage there are greater than 20
intermediary voltage states while constructing the SOC
BB we could hit issues because we will index outside of the
clock_limits array and start overwriting data. Increase the
total number of states to 40 to avoid this issue.

Cc: stable@vger.kernel.org # 6.1+
Reviewed-by: Samson Tam <samson.tam@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/i915: Call intel_pre_plane_updates() also for pipes getting enabled

[ Upstream commit d21a3962d3042e6f56ad324cf18bdd64a1e6ecfa ]

We used to call intel_pre_plane_updates() for any pipe going through
a modeset whether the pipe was previously enabled or not. This in
fact needed to apply all the necessary clock gating workarounds/etc.
Restore the correct behaviour.

Fixes: 39919997322f ("drm/i915: Disable all planes before modesetting any pipes")
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231121054324.9988-3-ville.syrjala@linux.intel.com
(cherry picked from commit e0d5ce11ed0a21bb2bf328ad82fd261783c7ad88)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: rockchip: rk3128: Fix SCLK_SDMMC's clock name

[ Upstream commit 99fe9ee56bd2f7358f1bc72551c2f3a6bbddf80a ]

SCLK_SDMMC is the parent for SCLK_SDMMC_DRV and SCLK_SDMMC_SAMPLE, but
used with the (more) correct name sclk_sdmmc. SD card tuning does currently
fail as the parent can't be found under that name.
There is no need to suffix the name with '0' since RK312x SoCs do have a
single sdmmc controller - so rename it to the name which is already used
by it's children.

Fixes: f6022e88faca ("clk: rockchip: add clock controller for rk3128")
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Link: https://lore.kernel.org/r/20231127181415.11735-6-knaerzche@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: rockchip: rk3128: Fix aclk_peri_src's parent

[ Upstream commit 98dcc6be3859fb15257750b8e1d4e0eefd2c5e1e ]

According to the TRM there are no specific gpll_peri, cpll_peri,
gpll_div2_peri or gpll_div3_peri gates, but a single clk_peri_src gate.
Instead mux_clk_peri_src directly connects to the plls respectively the pll
divider clocks.
Fix this by creating a single gated composite.

Also rename all occurrences of aclk_peri_src to clk_peri_src, since it
is the parent for peri aclks, pclks and hclks. That name also matches
the one used in the TRM.

Fixes: f6022e88faca ("clk: rockchip: add clock controller for rk3128")
Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>
[renamed aclk_peri_src -> clk_peri_src and added commit message]
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Link: https://lore.kernel.org/r/20231127181415.11735-4-knaerzche@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

phy: sunplus: return negative error code in sp_usb_phy_probe

[ Upstream commit 2a9c713825b3127ece11984abf973672c9779518 ]

devm_phy_create() return negative error code, 'ret' should be
'PTR_ERR(phy)' rather than '-PTR_ERR(phy)'.

Fixes: 99d9ccd97385 ("phy: usb: Add USB2.0 phy driver for Sunplus SP7021")
Signed-off-by: Su Hui <suhui@nfschina.com>
Link: https://lore.kernel.org/r/20231120091046.163781-1-suhui@nfschina.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

phy: mediatek: mipi: mt8183: fix minimal supported frequency

[ Upstream commit 06f76e464ac81c6915430b7155769ea4ef16efe4 ]

The lowest supported clock frequency of the PHY is 125MHz (see also
mtk_mipi_tx_pll_enable()), but the clamping in .round_rate() has the
wrong minimal value, which will make the .enable() op return -EINVAL on
low frequencies. Fix the minimal clamping value.

Fixes: efda51a58b4a ("drm/mediatek: add mipi_tx driver for mt8183")
Signed-off-by: Michael Walle <mwalle@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20231123110202.2025585-1-mwalle@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iommu/vt-d: Support enforce_cache_coherency only for empty domains

[ Upstream commit e645c20e8e9cde549bc233435d3c1338e1cd27fe ]

The enforce_cache_coherency callback ensures DMA cache coherency for
devices attached to the domain.

Intel IOMMU supports enforced DMA cache coherency when the Snoop
Control bit in the IOMMU's extended capability register is set.
Supporting it differs between legacy and scalable modes.

In legacy mode, it's supported page-level by setting the SNP field
in second-stage page-table entries. In scalable mode, it's supported
in PASID-table granularity by setting the PGSNP field in PASID-table
entries.

In legacy mode, mappings before attaching to a device have SNP
fields cleared, while mappings after the callback have them set.
This means partial DMAs are cache coherent while others are not.

One possible fix is replaying mappings and flipping SNP bits when
attaching a domain to a device. But this seems to be over-engineered,
given that all real use cases just attach an empty domain to a device.

To meet practical needs while reducing mode differences, only support
enforce_cache_coherency on a domain without mappings if SNP field is
used.

Fixes: fc0051cb9590 ("iommu/vt-d: Check domain force_snooping against attached devices")
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20231114011036.70142-1-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iio: imu: adis16475: use bit numbers in assign_bit()

[ Upstream commit 1cd2fe4fd63e54b799a68c0856bda18f2e40caa8 ]

assign_bit() expects a bit number and not a mask like BIT(x). Hence,
just remove the BIT() macro from the #defines.

Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Closes: https://lore.kernel.org/r/202311060647.i9XyO4ej-lkp@intel.com/
Fixes: fff7352bf7a3ce ("iio: imu: Add support for adis16475")
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20231106150730.945-1-nuno.sa@analog.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dmaengine: fsl-edma: Add judgment on enabling round robin arbitration

[ Upstream commit 3448397a47c08c291c3fccb7ac5f0f429fd547e0 ]

Add judgment on enabling round robin arbitration to avoid
exceptions if this function is not supported.

Call trace:
fsl_edma_resume_early+0x1d4/0x208
dpm_run_callback+0xd4/0x304
device_resume_early+0xb0/0x208
dpm_resume_early+0x224/0x528
suspend_devices_and_enter+0x3e4/0xd00
pm_suspend+0x3c4/0x910
state_store+0x90/0x124
kobj_attr_store+0x48/0x64
sysfs_kf_write+0x84/0xb4
kernfs_fop_write_iter+0x19c/0x264
vfs_write+0x664/0x858
ksys_write+0xc8/0x180
__arm64_sys_write+0x44/0x58
invoke_syscall+0x5c/0x178
el0_svc_common.constprop.0+0x11c/0x14c
do_el0_svc+0x30/0x40
el0_svc+0x58/0xa8
el0t_64_sync_handler+0xc0/0xc4
el0t_64_sync+0x190/0x194

Fixes: 72f5801a4e2b ("dmaengine: fsl-edma: integrate v3 support")
Signed-off-by: Xiaolei Wang <xiaolei.wang@windriver.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20231113225713.1892643-3-xiaolei.wang@windriver.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dmaengine: fsl-edma: Do not suspend and resume the masked dma channel when the system is sleeping

[ Upstream commit 2838a897654c4810153cc51646414ffa54fd23b0 ]

Some channels may be masked. When the system is suspended,
if these masked channels are not filtered out, this will
lead to null pointer operations and system crash:

Unable to handle kernel NULL pointer dereference at virtual address
Mem abort info:
ESR = 0x0000000096000004
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x04: level 0 translation fault
Data abort info:
ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000
CM = 0, WnR = 0, TnD = 0, TagAccess = 0
GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
user pgtable: 4k pages, 48-bit VAs, pgdp=0000000894300000
[00000000000002a0] pgd=0000000000000000, p4d=0000000000000000
Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP
Modules linked in:
CPU: 1 PID: 989 Comm: sh Tainted: G B 6.6.0-16203-g557fb7a3ec4c-dirty #70
Hardware name: Freescale i.MX8QM MEK (DT)
pstate: 400000c5 (nZcv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
  pc: fsl_edma_disable_request+0x3c/0x78
  lr: fsl_edma_disable_request+0x3c/0x78
  sp:ffff800089ae7690
  x29: ffff800089ae7690 x28: ffff000807ab5440 x27: ffff000807ab5830
  x26: 0000000000000008 x25: 0000000000000278 x24: 0000000000000001
  23: ffff000807ab4328 x22: 0000000000000000 x21: 0000000000000009
  x20: ffff800082616940 x19: 0000000000000000 x18: 0000000000000000
  x17: 3d3d3d3d3d3d3d3d x16: 3d3d3d3d3d3d3d3d x15: 3d3d3d3d3d3d3d3d
  x14: 3d3d3d3d3d3d3d3d x13: 3d3d3d3d3d3d3d3d x12: 1ffff00010d45724
  x11: ffff700010d45724 x10: dfff800000000000 x9: dfff800000000000
  x8: 00008fffef2ba8dc x7: 0000000000000001 x6: ffff800086a2b927
  x5: ffff800086a2b920 x4: ffff700010d45725 x3: ffff8000800d5bbc
  x2 : 0000000000000000 x1 : ffff000800c1d880 x0 : 0000000000000001
  Call trace:
   fsl_edma_disable_request+0x3c/0x78
   fsl_edma_suspend_late+0x128/0x12c
  dpm_run_callback+0xd4/0x304
   __device_suspend_late+0xd0/0x240
  dpm_suspend_late+0x174/0x59c
  suspend_devices_and_enter+0x194/0xd00
  pm_suspend+0x3c4/0x910

Fixes: 72f5801a4e2b ("dmaengine: fsl-edma: integrate v3 support")
Signed-off-by: Xiaolei Wang <xiaolei.wang@windriver.com>
Link: https://lore.kernel.org/r/20231113225713.1892643-2-xiaolei.wang@windriver.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dmaengine: ti: k3-psil-am62a: Fix SPI PDMA data

[ Upstream commit be37542afbfcd27b3bb99a135abf9b4736b96f75 ]

AM62Ax has 3 SPI channels where each channel has 4x TX and 4x RX
threads. Also fix the thread numbers to match what the firmware expects
according to the PSI-L device description.

Link: http://downloads.ti.com/tisci/esd/latest/5_soc_doc/am62ax/psil_cfg.html
Fixes: aac6db7e243a ("dmaengine: ti: k3-psil-am62a: Add AM62Ax PSIL and PDMA data")
Signed-off-by: Jai Luthra <j-luthra@ti.com>
Link: https://lore.kernel.org/r/20231123-psil_fix-v1-1-6604d80819be@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dmaengine: ti: k3-psil-am62: Fix SPI PDMA data

[ Upstream commit 744f5e7b69710701dc225020769138f8ca2894df ]

AM62x has 3 SPI channels where each channel has 4 TX and 4 RX threads.
This also fixes the thread numbers.

Signed-off-by: Ronald Wahl <ronald.wahl@raritan.com>
Fixes: 5ac6bfb58777 ("dmaengine: ti: k3-psil: Add AM62x PSIL and PDMA data")
Reviewed-by: Jai Luthra <j-luthra@ti.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://lore.kernel.org/r/20231030190113.16782-1-rwahl@gmx.de
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

phy: ti: gmii-sel: Fix register offset when parent is not a syscon node

[ Upstream commit 0f40d5099cd6d828fd7de6227d3eabe86016724c ]

When the node for this phy selector is a child node of a syscon node then the
property 'reg' is used as an offset into the parent regmap. When the node
is standalone and gets its own regmap this offset is pre-applied. So we need
to track which method was used to get the regmap and not apply the offset
in the standalone case.

Fixes: 1fdfa7cccd35 ("phy: ti: gmii-sel: Allow parent to not be syscon node")
Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/20231025143302.1265633-1-afd@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

KVM: s390: vsie: fix wrong VIR 37 when MSO is used

[ Upstream commit 80aea01c48971a1fffc0252d036995572d84950d ]

When the host invalidates a guest page, it will also check if the page
was used to map the prefix of any guest CPUs, in which case they are
stopped and marked as needing a prefix refresh. Upon starting the
affected CPUs again, their prefix pages are explicitly faulted in and
revalidated if they had been invalidated. A bit in the PGSTEs indicates
whether or not a page might contain a prefix. The bit is allowed to
overindicate. Pages above 2G are skipped, because they cannot be
prefixes, since KVM runs all guests with MSO = 0.

The same applies for nested guests (VSIE). When the host invalidates a
guest page that maps the prefix of the nested guest, it has to stop the
affected nested guest CPUs and mark them as needing a prefix refresh.
The same PGSTE bit used for the guest prefix is also used for the
nested guest. Pages above 2G are skipped like for normal guests, which
is the source of the bug.

The nested guest runs is the guest primary address space. The guest
could be running the nested guest using MSO != 0. If the MSO + prefix
for the nested guest is above 2G, the check for nested prefix will skip
it. This will cause the invalidation notifier to not stop the CPUs of
the nested guest and not mark them as needing refresh. When the nested
guest is run again, its prefix will not be refreshed, since it has not
been marked for refresh. This will cause a fatal validity intercept
with VIR code 37.

Fix this by removing the check for 2G for nested guests. Now all
invalidations of pages with the notify bit set will always scan the
existing VSIE shadow state descriptors.

This allows to catch invalidations of nested guest prefix mappings even
when the prefix is above 2G in the guest virtual address space.

Fixes: a3508fbe9dc6 ("KVM: s390: vsie: initial support for nested virtualization")
Tested-by: Nico Boehr <nrb@linux.ibm.com>
Reviewed-by: Nico Boehr <nrb@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-ID: <20231102153549.53984-1-imbrenda@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

riscv: don't probe unaligned access speed if already done

[ Upstream commit c20d36cc2a2073d4cdcda92bd7a1bb9b3b3b7c79 ]

If misaligned_access_speed percpu var isn't so called "HWPROBE
MISALIGNED UNKNOWN", it means the probe has happened(this is possible
for example, hotplug off then hotplug on one cpu), and the percpu var
has been set, don't probe again in this case.

Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Fixes: 584ea6564bca ("RISC-V: Probe for unaligned access speed")
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230912154040.3306-1-jszhang@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

rcu/tasks-trace: Handle new PF_IDLE semantics

[ Upstream commit a80712b9cc7e57830260ec5e1feb9cdb59e1da2f ]

The commit:

cff9b2332ab7 ("kernel/sched: Modify initial boot task idle setup")

has changed the semantics of what is to be considered an idle task in
such a way that the idle task of an offline CPU may not carry the
PF_IDLE flag anymore.

However RCU-tasks-trace tests the opposite assertion, still assuming
that idle tasks carry the PF_IDLE flag during their whole lifecycle.

Remove this assumption to avoid spurious warnings but keep the initial
test verifying that the idle task is the current task on any offline
CPU.

Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Fixes: cff9b2332ab7 ("kernel/sched: Modify initial boot task idle setup")
Suggested-by: Joel Fernandes <joel@joelfernandes.org>
Suggested-by: "Paul E. McKenney" <paulmck@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

rcu/tasks: Handle new PF_IDLE semantics

[ Upstream commit 9715ed501b585d47444865071674c961c0cc0020 ]

The commit:

cff9b2332ab7 ("kernel/sched: Modify initial boot task idle setup")

has changed the semantics of what is to be considered an idle task in
such a way that CPU boot code preceding the actual idle loop is excluded
from it.

This has however introduced new potential RCU-tasks stalls when either:

1) Grace period is started before init/0 had a chance to set PF_IDLE,
   keeping it stuck in the holdout list until idle ever schedules.

2) Grace period is started when some possible CPUs have never been
   online, keeping their idle tasks stuck in the holdout list until the
   CPU ever boots up.

3) Similar to 1) but with secondary CPUs: Grace period is started
   concurrently with secondary CPU booting, putting its idle task in
   the holdout list because PF_IDLE isn't yet observed on it. It stays
   then stuck in the holdout list until that CPU ever schedules. The
   effect is mitigated here by the hotplug AP thread that must run to
   bring the CPU up.

Fix this with handling the new semantics of PF_IDLE, keeping in mind
that it may or may not be set on an idle task. Take advantage of that to
strengthen the coverage of an RCU-tasks quiescent state within an idle
task, excluding the CPU boot code from it. Only the code running within
the idle loop is now a quiescent state, along with offline CPUs.

Fixes: cff9b2332ab7 ("kernel/sched: Modify initial boot task idle setup")
Suggested-by: Joel Fernandes <joel@joelfernandes.org>
Suggested-by: "Paul E. McKenney" <paulmck@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

rcu: Introduce rcu_cpu_online()

[ Upstream commit 2be4686d866ad5896f2bb94d82fe892197aea9c7 ]

Export the RCU point of view as to when a CPU is considered offline
(ie: when does RCU consider that a CPU is sufficiently down in the
hotplug process to not feature any possible read side).

This will be used by RCU-tasks whose vision of an offline CPU should
reasonably match the one of RCU core.

Fixes: cff9b2332ab7 ("kernel/sched: Modify initial boot task idle setup")
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

rcu: Break rcu_node_0 --> &rq->__lock order

[ Upstream commit 85d68222ddc5f4522e456d97d201166acb50f716 ]

Commit 851a723e45d1 ("sched: Always clear user_cpus_ptr in
do_set_cpus_allowed()") added a kfree() call to free any user
provided affinity mask, if present. It was changed later to use
kfree_rcu() in commit 9a5418bc48ba ("sched/core: Use kfree_rcu()
in do_set_cpus_allowed()") to avoid a circular locking dependency
problem.

It turns out that even kfree_rcu() isn't safe for avoiding
circular locking problem. As reported by kernel test robot,
the following circular locking dependency now exists:

&rdp->nocb_lock --> rcu_node_0 --> &rq->__lock

Solve this by breaking the rcu_node_0 --> &rq->__lock chain by moving
the resched_cpu() out from under rcu_node lock.

[peterz: heavily borrowed from Waiman's Changelog]
[paulmck: applied Z qiang feedback]

Fixes: 851a723e45d1 ("sched: Always clear user_cpus_ptr in do_set_cpus_allowed()")
Reported-by: kernel test robot <oliver.sang@intel.com>
Acked-by: Waiman Long <longman@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/oe-lkp/202310302207.a25f1a30-oliver.sang@intel.com
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ACPI: thermal: Fix acpi_thermal_unregister_thermal_zone() cleanup

[ Upstream commit 4b27d5c420335dad7aea1aa6e799fe1d05c63b7e ]

The acpi_thermal_unregister_thermal_zone() is paired with
acpi_thermal_register_thermal_zone() so it should mirror it.  It should
clean up all the resources that the register function allocated and
leave the stuff that was allocated elsewhere.

Unfortunately, it doesn't call thermal_zone_device_disable().  Also it
calls kfree(tz->trip_table) when it shouldn't.  That was allocated in
acpi_thermal_add().  Putting the kfree() here leads to a double free
in the acpi_thermal_add() clean up function.

Likewise, the acpi_thermal_remove() should mirror acpi_thermal_add() so
it should have an explicit kfree(tz->trip_table) as well.

Fixes: ec23c1c462de ("ACPI: thermal: Use trip point table to register thermal zones")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/mlx5: Fix mkey cache WQ flush

[ Upstream commit a53e215f90079f617360439b1b6284820731e34c ]

The cited patch tries to ensure no pending works on the mkey cache
workqueue by disabling adding new works and call flush_workqueue().
But this workqueue also has delayed works which might still be pending
the delay time to be queued.

Add cancel_delayed_work() for the delayed works which waits to be queued
and then the flush_workqueue() will flush all works which are already
queued and running.

Fixes: 374012b00457 ("RDMA/mlx5: Fix mkey cache possible deadlock on cleanup")
Link: https://lore.kernel.org/r/b8722f14e7ed81452f791764a26d2ed4cfa11478.1698256179.git.leon@kernel.org
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: si521xx: Increase stack based print buffer size in probe

[ Upstream commit 7e52b1164a474dc7b90f68fbb40e35ccd7f7e2e2 ]

Increase the size of temporary print buffer on stack to fix the
following warnings reported by LKP.

Since all the input parameters of snprintf() are under control
of this driver, it is not possible to trigger and overflow here,
but since the print buffer is on stack and discarded once driver
probe() finishes, it is not an issue to increase it by 10 bytes
and fix the warning in the process. Make it so.

"
   drivers/clk/clk-si521xx.c: In function 'si521xx_probe':
>> drivers/clk/clk-si521xx.c:318:26: warning: '%d' directive output may be truncated writing between 1 and 10 bytes into a region of size 2 [-Wformat-truncation=]
      snprintf(name, 6, "DIFF%d", i);
                             ^~
   drivers/clk/clk-si521xx.c:318:21: note: directive argument in the range [0, 2147483647]
      snprintf(name, 6, "DIFF%d", i);
                        ^~~~~~~~
   drivers/clk/clk-si521xx.c:318:3: note: 'snprintf' output between 6 and 15 bytes into a destination of size 6
      snprintf(name, 6, "DIFF%d", i);
      ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
"

Fixes: edc12763a3a2 ("clk: si521xx: Clock driver for Skyworks Si521xx I2C PCIe clock generators")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202310260412.AGASjFN4-lkp@intel.com/
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://lore.kernel.org/r/20231027085840.30098-1-marex@denx.de
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

vfio/mtty: Overhaul mtty interrupt handling

[ Upstream commit 293fbc28818135743f54d46c418ede3e4a20a742 ]

The mtty driver does not currently conform to the vfio SET_IRQS uAPI.
For example, it claims to support mask and unmask of INTx, but actually
does nothing.  It claims to support AUTOMASK for INTx, but doesn't.  It
fails to teardown eventfds under the full semantics specified by the
SET_IRQS ioctl.  It also fails to teardown eventfds when the device is
closed, leading to memory leaks.  It claims to support the request IRQ,
but doesn't.

Fix all these.

A side effect of this is that QEMU will now report a warning:

vfio <uuid>: Failed to set up UNMASK eventfd signaling for interrupt \
INTX-0: VFIO_DEVICE_SET_IRQS failure: Inappropriate ioctl for device

The fact is that the unmask eventfd was never supported but quietly
failed.  mtty never honored the AUTOMASK behavior, therefore there
was nothing to unmask.  QEMU is verbose about the failure, but
properly falls back to userspace unmasking.

Fixes: 9d1a546c53b4 ("docs: Sample driver to demonstrate how to use Mediated device framework.")
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Link: https://lore.kernel.org/r/20231016224736.2575718-2-alex.williamson@redhat.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: hisilicon/qm - fix EQ/AEQ interrupt issue

[ Upstream commit 5acab6eb592387191c1bb745ba9b815e1e076db5 ]

During hisilicon accelerator live migration operation. In order to
prevent the problem of EQ/AEQ interrupt loss. Migration driver will
trigger an EQ/AEQ doorbell at the end of the migration.

This operation may cause double interruption of EQ/AEQ events.
To ensure that the EQ/AEQ interrupt processing function is normal.
The interrupt handling functionality of EQ/AEQ needs to be updated.
Used to handle repeated interrupts event.

Fixes: b0eed085903e ("hisi_acc_vfio_pci: Add support for VFIO live migration")
Signed-off-by: Longfang Liu <liulongfang@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: qat - fix double free during reset

[ Upstream commit 01aed663e6c421aeafc9c330bda630976b50a764 ]

There is no need to free the reset_data structure if the recovery is
unsuccessful and the reset is synchronous. The function
adf_dev_aer_schedule_reset() handles the cleanup properly. Only
asynchronous resets require such structure to be freed inside the reset
worker.

Fixes: d8cba25d2c68 ("crypto: qat - Intel(R) QAT driver framework")
Signed-off-by: Svyatoslav Pankratov <svyatoslav.pankratov@intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: xts - use 'spawn' for underlying single-block cipher

[ Upstream commit bb40d32689d73c46de39a0529d551f523f21dc9b ]

Since commit adad556efcdd ("crypto: api - Fix built-in testing
dependency failures"), the following warning appears when booting an
x86_64 kernel that is configured with
CONFIG_CRYPTO_MANAGER_EXTRA_TESTS=y and CONFIG_CRYPTO_AES_NI_INTEL=y,
even when CONFIG_CRYPTO_XTS=y and CONFIG_CRYPTO_AES=y:

    alg: skcipher: skipping comparison tests for xts-aes-aesni because xts(ecb(aes-generic)) is unavailable

This is caused by an issue in the xts template where it allocates an
"aes" single-block cipher without declaring a dependency on it via the
crypto_spawn mechanism.  This issue was exposed by the above commit
because it reversed the order that the algorithms are tested in.

Specifically, when "xts(ecb(aes-generic))" is instantiated and tested
during the comparison tests for "xts-aes-aesni", the "xts" template
allocates an "aes" crypto_cipher for encrypting tweaks.  This resolves
to "aes-aesni".  (Getting "aes-aesni" instead of "aes-generic" here is a
bit weird, but it's apparently intended.)  Due to the above-mentioned
commit, the testing of "aes-aesni", and the finalization of its
registration, now happens at this point instead of before.  At the end
of that, crypto_remove_spawns() unregisters all algorithm instances that
depend on a lower-priority "aes" implementation such as "aes-generic"
but that do not depend on "aes-aesni".  However, because "xts" does not
use the crypto_spawn mechanism for its "aes", its dependency on
"aes-aesni" is not recognized by crypto_remove_spawns().  Thus,
crypto_remove_spawns() unexpectedly unregisters "xts(ecb(aes-generic))".

Fix this issue by making the "xts" template use the crypto_spawn
mechanism for its "aes" dependency, like what other templates do.

Note, this fix could be applied as far back as commit f1c131b45410
("crypto: xts - Convert to skcipher").  However, the issue only got
exposed by the much more recent changes to how the crypto API runs the
self-tests, so there should be no need to backport this to very old
kernels.  Also, an alternative fix would be to flip the list iteration
order in crypto_start_tests() to restore the original testing order.
I'm thinking we should do that too, since the original order seems more
natural, but it shouldn't be relied on for correctness.

Fixes: adad556efcdd ("crypto: api - Fix built-in testing dependency failures")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpftool: Align output skeleton ELF code

[ Upstream commit 23671f4dfd10b48b4a2fee4768886f0d8ec55b7e ]

libbpf accesses the ELF data requiring at least 8 byte alignment,
however, the data is generated into a C string that doesn't guarantee
alignment. Fix this by assigning to an aligned char array. Use sizeof
on the array, less one for the \0 terminator, rather than generating a
constant.

Fixes: a6cc6b34b93e ("bpftool: Provide a helper method for accessing skeleton's embedded ELF data")
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Alan Maguire <alan.maguire@oracle.com>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20231007044439.25171-1-irogers@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpftool: Fix -Wcast-qual warning

[ Upstream commit ebc8484d0e6da9e6c9e8cfa1f40bf94e9c6fc512 ]

This cast was made by purpose for older libbpf where the
bpf_object_skeleton field is void * instead of const void *
to eliminate a warning (as i understand
-Wincompatible-pointer-types-discards-qualifiers) but this
cast introduces another warning (-Wcast-qual) for libbpf
where data field is const void *

It makes sense for bpftool to be in sync with libbpf from
kernel sources

Signed-off-by: Denys Zagorui <dzagorui@cisco.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20230907090210.968612-1-dzagorui@cisco.com
Stable-dep-of: 23671f4dfd10 ("bpftool: Align output skeleton ELF code")
Signed-off-by: Sasha Levin <sashal@kernel.org>

tcp: derive delack_max from rto_min

[ Upstream commit bbf80d713fe75cfbecda26e7c03a9a8d22af2f4f ]

While BPF allows to set icsk->->icsk_delack_max
and/or icsk->icsk_rto_min, we have an ip route
attribute (RTAX_RTO_MIN) to be able to tune rto_min,
but nothing to consequently adjust max delayed ack,
which vary from 40ms to 200 ms (TCP_DELACK_{MIN|MAX}).

This makes RTAX_RTO_MIN of almost no practical use,
unless customers are in big trouble.

Modern days datacenter communications want to set
rto_min to ~5 ms, and the max delayed ack one jiffie
smaller to avoid spurious retransmits.

After this patch, an "rto_min 5" route attribute will
effectively lower max delayed ack timers to 4 ms.

Note in the following ss output, "rto:6 ... ato:4"

$ ss -temoi dst XXXXXX
State Recv-Q Send-Q           Local Address:Port       Peer Address:Port  Process
ESTAB 0      0        [2002:a05:6608:295::]:52950   [2002:a05:6608:297::]:41597
     ino:255134 sk:1001 <->
         skmem:(r0,rb1707063,t872,tb262144,f0,w0,o0,bl0,d0) ts sack
cubic wscale:8,8 rto:6 rtt:0.02/0.002 ato:4 mss:4096 pmtu:4500
rcvmss:536 advmss:4096 cwnd:10 bytes_sent:54823160 bytes_acked:54823121
bytes_received:54823120 segs_out:1370582 segs_in:1370580
data_segs_out:1370579 data_segs_in:1370578 send 16.4Gbps
pacing_rate 32.6Gbps delivery_rate 1.72Gbps delivered:1370579
busy:26920ms unacked:1 rcv_rtt:34.615 rcv_space:65920
rcv_ssthresh:65535 minrtt:0.015 snd_wnd:65536

While we could argue this patch fixes a bug with RTAX_RTO_MIN,
I do not add a Fixes: tag, so that we can soak it a bit before
asking backports to stable branches.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: qcom: camss: Fix genpd cleanup

[ Upstream commit f69791c39745e64621216fe8919cb73c0065002b ]

Right now we never release the power-domains properly on the error path.
Add a routine to be reused for this purpose and appropriate jumps in
probe() to run that routine where necessary.

Fixes: 2f6f8af67203 ("media: camss: Refactor VFE power domain toggling")
Cc: stable@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: qcom: camss: Fix V4L2 async notifier error path

[ Upstream commit b278080a89f452063915beda0ade6b3ed5ee4271 ]

Previously the jump label err_cleanup was used higher in the probe()
function to release the async notifier however the async notifier
registration was moved later in the code rendering the previous four jumps
redundant.

Rename the label from err_cleanup to err_v4l2_device_unregister to capture
what the jump does.

Fixes: 51397a4ec75d ("media: qcom: Initialise V4L2 async notifier later")
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
[hverkuil: fix old name in commit log: err_v4l2_device_register -> err_v4l2_device_unregister]
Signed-off-by: Sasha Levin <sashal@kernel.org>

xsk: add multi-buffer support for sockets sharing umem

[ Upstream commit d609f3d228a8efe991f44f11f24146e2a5209755 ]

Userspace applications indicate their multi-buffer capability to xsk
using XSK_USE_SG socket bind flag. For sockets using shared umem the
bind flag may contain XSK_USE_SG only for the first socket. For any
subsequent socket the only option supported is XDP_SHARED_UMEM.

Add option XDP_UMEM_SG_FLAG in umem config flags to store the
multi-buffer handling capability when indicated by XSK_USE_SG option in
bing flag by the first socket. Use this to derive multi-buffer capability
for subsequent sockets in xsk core.

Signed-off-by: Tirthendu Sarkar <tirthendu.sarkar@intel.com>
Fixes: 81470b5c3c66 ("xsk: introduce XSK_USE_SG bind flag for xsk socket")
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/r/20230907035032.2627879-1-tirthendu.sarkar@intel.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mm/memory-failure: pass the folio and the page to collect_procs()

[ Upstream commit 376907f3a0b34a17e80417825f8cc1c40fcba81b ]

Patch series "Three memory-failure fixes".

I've been looking at the memory-failure code and I believe I have found
three bugs that need fixing -- one going all the way back to 2010!  I'll
have more patches later to use folios more extensively but didn't want
these bugfixes to get caught up in that.

This patch (of 3):

Both collect_procs_anon() and collect_procs_file() iterate over the VMA
interval trees looking for a single pgoff, so it is wrong to look for the
pgoff of the head page as is currently done.  However, it is also wrong to
look at page->mapping of the precise page as this is invalid for tail
pages.  Clear up the confusion by passing both the folio and the precise
page to collect_procs().

Link: https://lkml.kernel.org/r/20231218135837.3310403-1-willy@infradead.org
Link: https://lkml.kernel.org/r/20231218135837.3310403-2-willy@infradead.org
Fixes: 415c64c1453a ("mm/memory-failure: split thp earlier in memory error handling")
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mm: convert DAX lock/unlock page to lock/unlock folio

[ Upstream commit 91e79d22be75fec88ae58d274a7c9e49d6215099 ]

The one caller of DAX lock/unlock page already calls compound_head(), so
use page_folio() instead, then use a folio throughout the DAX code to
remove uses of page->mapping and page->index.

[jane.chu@oracle.com: add comment to mf_generic_kill_procss(), simplify mf_generic_kill_procs:folio initialization]
Link: https://lkml.kernel.org/r/20230908222336.186313-1-jane.chu@oracle.com
Link: https://lkml.kernel.org/r/20230822231314.349200-1-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Jane Chu <jane.chu@oracle.com>
Acked-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Jane Chu <jane.chu@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stable-dep-of: 376907f3a0b3 ("mm/memory-failure: pass the folio and the page to collect_procs()")
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: Implement missing SO_TIMESTAMPING_NEW cmsg support

[ Upstream commit 382a32018b74f407008615e0e831d05ed28e81cd ]

Commit 9718475e6908 ("socket: Add SO_TIMESTAMPING_NEW") added the new
socket option SO_TIMESTAMPING_NEW. However, it was never implemented in
__sock_cmsg_send thus breaking SO_TIMESTAMPING cmsg for platforms using
SO_TIMESTAMPING_NEW.

Fixes: 9718475e6908 ("socket: Add SO_TIMESTAMPING_NEW")
Link: https://lore.kernel.org/netdev/6a7281bf-bc4a-4f75-bb88-7011908ae471@app.fastmail.com/
Signed-off-by: Thomas Lange <thomas@corelatus.se>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20240104085744.49164-1-thomas@corelatus.se
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bnxt_en: Remove mis-applied code from bnxt_cfg_ntp_filters()

[ Upstream commit e009b2efb7a8850498796b360043ac25c8d3d28f ]

The 2 lines to check for the BNXT_HWRM_PF_UNLOAD_SP_EVENT bit was
mis-applied to bnxt_cfg_ntp_filters() and should have been applied to
bnxt_sp_task().

Fixes: 19241368443f ("bnxt_en: Send PF driver unload notification to all VFs.")
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: ravb: Wait for operating mode to be applied

[ Upstream commit 9039cd4c61635b2d541009a7cd5e2cc052402f28 ]

CSR.OPS bits specify the current operating mode and (according to
documentation) they are updated by HW when the operating mode change
request is processed. To comply with this check CSR.OPS before proceeding.

Commit introduces ravb_set_opmode() that does all the necessities for
setting the operating mode (set CCC.OPC (and CCC.GAC, CCC.CSEL, if any) and
wait for CSR.OPS) and call it where needed. This should comply with all the
HW manuals requirements as different manual variants specify that different
modes need to be checked in CSR.OPS when setting CCC.OPC.

If gPTP active in config mode is supported and it needs to be enabled, the
CCC.GAC and CCC.CSEL needs to be configured along with CCC.OPC in the same
write access. For this, ravb_set_opmode() allows passing GAC and CSEL as
part of opmode and the function updates accordingly CCC register.

Fixes: c156633f1353 ("Renesas Ethernet AVB driver proper")
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

asix: Add check for usbnet_get_endpoints

[ Upstream commit eaac6a2d26b65511e164772bec6918fcbc61938e ]

Add check for usbnet_get_endpoints() and return the error if it fails
in order to transfer the error.

Fixes: 16626b0cc3d5 ("asix: Add a new driver for the AX88172A")
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

octeontx2-af: Re-enable MAC TX in otx2_stop processing

[ Upstream commit 818ed8933bd17bc91a9fa8b94a898189c546fc1a ]

During QoS scheduling testing with multiple strict priority flows, the
netdev tx watchdog timeout routine is invoked when a low priority QoS
queue doesn't get a chance to transmit the packets because other high
priority flows are completely subscribing the transmit link. The netdev
tx watchdog timeout routine will stop MAC RX and TX functionality in
otx2_stop() routine before cleanup of HW TX queues which results in SMQ
flush errors because the packets belonging to low priority queues will
never gets flushed since MAC TX is disabled. This patch fixes the issue
by re-enabling MAC TX to ensure the packets in HW pipeline gets flushed
properly.

Fixes: a7faa68b4e7f ("octeontx2-af: Start/Stop traffic in CGX along with NPC")
Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

octeontx2-af: Always configure NIX TX link credits based on max frame size

[ Upstream commit a0d9528f6daf7fe8de217fa80a94d2989d2a57a7 ]

Currently the NIX TX link credits are initialized based on the max frame
size that can be transmitted on a link but when the MTU is changed, the
NIX TX link credits are reprogrammed by the SW based on the new MTU value.
Since SMQ max packet length is programmed to max frame size by default,
there is a chance that NIX TX may stall while sending a max frame sized
packet on the link with insufficient credits to send the packet all at
once. This patch avoids stall issue by not changing the link credits
dynamically when the MTU is changed.

Fixes: 1c74b89171c3 ("octeontx2-af: Wait for TX link idle for credits change")
Signed-off-by: Naveen Mamindlapalli <naveenm@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: Nithin Kumar Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/smc: fix invalid link access in dumping SMC-R connections

[ Upstream commit 9dbe086c69b8902c85cece394760ac212e9e4ccc ]

A crash was found when dumping SMC-R connections. It can be reproduced
by following steps:

- environment: two RNICs on both sides.
- run SMC-R between two sides, now a SMC_LGR_SYMMETRIC type link group
  will be created.
- set the first RNIC down on either side and link group will turn to
  SMC_LGR_ASYMMETRIC_LOCAL then.
- run 'smcss -R' and the crash will be triggered.

BUG: kernel NULL pointer dereference, address: 0000000000000010
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 8000000101fdd067 P4D 8000000101fdd067 PUD 10ce46067 PMD 0
Oops: 0000 [#1] PREEMPT SMP PTI
CPU: 3 PID: 1810 Comm: smcss Kdump: loaded Tainted: G W   E      6.7.0-rc6+ #51
RIP: 0010:__smc_diag_dump.constprop.0+0x36e/0x620 [smc_diag]
Call Trace:
  <TASK>
  ? __die+0x24/0x70
  ? page_fault_oops+0x66/0x150
  ? exc_page_fault+0x69/0x140
  ? asm_exc_page_fault+0x26/0x30
  ? __smc_diag_dump.constprop.0+0x36e/0x620 [smc_diag]
  smc_diag_dump_proto+0xd0/0xf0 [smc_diag]
  smc_diag_dump+0x26/0x60 [smc_diag]
  netlink_dump+0x19f/0x320
  __netlink_dump_start+0x1dc/0x300
  smc_diag_handler_dump+0x6a/0x80 [smc_diag]
  ? __pfx_smc_diag_dump+0x10/0x10 [smc_diag]
  sock_diag_rcv_msg+0x121/0x140
  ? __pfx_sock_diag_rcv_msg+0x10/0x10
  netlink_rcv_skb+0x5a/0x110
  sock_diag_rcv+0x28/0x40
  netlink_unicast+0x22a/0x330
  netlink_sendmsg+0x240/0x4a0
  __sock_sendmsg+0xb0/0xc0
  ____sys_sendmsg+0x24e/0x300
  ? copy_msghdr_from_user+0x62/0x80
  ___sys_sendmsg+0x7c/0xd0
  ? __do_fault+0x34/0x1a0
  ? do_read_fault+0x5f/0x100
  ? do_fault+0xb0/0x110
  __sys_sendmsg+0x4d/0x80
  do_syscall_64+0x45/0xf0
  entry_SYSCALL_64_after_hwframe+0x6e/0x76

When the first RNIC is set down, the lgr->lnk[0] will be cleared and an
asymmetric link will be allocated in lgr->link[SMC_LINKS_PER_LGR_MAX - 1]
by smc_llc_alloc_alt_link(). Then when we try to dump SMC-R connections
in __smc_diag_dump(), the invalid lgr->lnk[0] will be accessed, resulting
in this issue. So fix it by accessing the right link.

Fixes: f16a7dd5cf27 ("smc: netlink interface for SMC sockets")
Reported-by: henaumars <henaumars@sina.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=7616
Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Reviewed-by: Tony Lu <tonylu@linux.alibaba.com>
Link: https://lore.kernel.org/r/1703662835-53416-1-git-send-email-guwen@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/qla3xxx: fix potential memleak in ql_alloc_buffer_queues

[ Upstream commit 89f45c30172c80e55c887f32f1af8e184124577b ]

When dma_alloc_coherent() fails, we should free qdev->lrg_buf
to prevent potential memleak.

Fixes: 1357bfcf7106 ("qla3xxx: Dynamically size the rx buffer queue based on the MTU.")
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Link: https://lore.kernel.org/r/20231227070227.10527-1-dinghao.liu@zju.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

virtio_net: fix missing dma unmap for resize

[ Upstream commit 2311e06b9bf3d44e15f9175af177a782806f688f ]

For rq, we have three cases getting buffers from virtio core:

1. virtqueue_get_buf{,_ctx}
2. virtqueue_detach_unused_buf
3. callback for virtqueue_resize

But in commit 295525e29a5b("virtio_net: merge dma operations when
filling mergeable buffers"), I missed the dma unmap for the #3 case.

That will leak some memory, because I did not release the pages referred
by the unused buffers.

If we do such script, we will make the system OOM.

    while true
    do
            ethtool -G ens4 rx 128
            ethtool -G ens4 rx 256
            free -m
    done

Fixes: 295525e29a5b ("virtio_net: merge dma operations when filling mergeable buffers")
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://lore.kernel.org/r/20231226094333.47740-1-xuanzhuo@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

virtio_net: avoid data-races on dev->stats fields

[ Upstream commit d12a26b74fb77434b73fe39022266c4b00907219 ]

Use DEV_STATS_INC() and DEV_STATS_READ() which provide
atomicity on paths that can be used concurrently.

Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stable-dep-of: 2311e06b9bf3 ("virtio_net: fix missing dma unmap for resize")
Signed-off-by: Sasha Levin <sashal@kernel.org>

apparmor: Fix move_mount mediation by detecting if source is detached

[ Upstream commit 8026e40608b4d552216d2a818ca7080a4264bb44 ]

Prevent move_mount from applying the attach_disconnected flag
to move_mount(). This prevents detached mounts from appearing
as / when applying mount mediation, which is not only incorrect
but could result in bad policy being generated.

Basic mount rules like
  allow mount,
  allow mount options=(move) -> /target/,

will allow detached mounts, allowing older policy to continue
to function. New policy gains the ability to specify `detached` as
a source option
  allow mount detached -> /target/,

In addition make sure support of move_mount is advertised as
a feature to userspace so that applications that generate policy
can respond to the addition.

Note: this fixes mediation of move_mount when a detached mount is used,
      it does not fix the broader regression of apparmor mediation of
      mounts under the new mount api.

Link: https://lore.kernel.org/all/68c166b8-5b4d-4612-8042-1dee3334385b@leemhuis.info/T/#mb35fdde37f999f08f0b02d58dc1bf4e6b65b8da2
Fixes: 157a3537d6bc ("apparmor: Fix regression in mount mediation")
Reviewed-by: Georgia Garcia <georgia.garcia@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

igc: Fix hicredit calculation

[ Upstream commit 947dfc8138dfaeb6e966e2d661de89eb203e3064 ]

According to the Intel Software Manual for I225, Section 7.5.2.7,
hicredit should be multiplied by the constant link-rate value, 0x7736.

Currently, the old constant link-rate value, 0x7735, from the boards
supported on igb are being used, most likely due to a copy'n'paste, as
the rest of the logic is the same for both drivers.

Update hicredit accordingly.

Fixes: 1ab011b0bf07 ("igc: Add support for CBS offloading")
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Signed-off-by: Rodrigo Cataldo <rodrigo.cadore@l-acoustics.com>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

i40e: Restore VF MSI-X state during PCI reset

[ Upstream commit 371e576ff3e8580d91d49026e5d5faebf5565558 ]

During a PCI FLR the MSI-X Enable flag in the VF PCI MSI-X capability
register will be cleared. This can lead to issues when a VF is
assigned to a VM because in these cases the VF driver receives no
indication of the PF PCI error/reset and additionally it is incapable
of restoring the cleared flag in the hypervisor configuration space
without fully reinitializing the driver interrupt functionality.

Since the VF driver is unable to easily resolve this condition on its own,
restore the VF MSI-X flag during the PF PCI reset handling.

Fixes: 19b7960b2da1 ("i40e: implement split PCI error reset handler")
Co-developed-by: Karen Ostrowska <karen.ostrowska@intel.com>
Signed-off-by: Karen Ostrowska <karen.ostrowska@intel.com>
Co-developed-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Andrii Staikov <andrii.staikov@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: meson: g12a-tohdmitx: Fix event generation for S/PDIF mux

[ Upstream commit b036d8ef3120b996751495ce25994eea58032a98 ]

When a control changes value the return value from _put() should be 1 so
we get events generated to userspace notifying applications of the change.
While the I2S mux gets this right the S/PDIF mux does not, fix the return
value.

Fixes: c8609f3870f7 ("ASoC: meson: add g12a tohdmitx control")
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240103-meson-enum-val-v1-4-424af7a8fb91@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: meson: g12a-toacodec: Fix event generation

[ Upstream commit 172c88244b5f2d3375403ebb504d407be0fded59 ]

When a control changes value the return value from _put() should be 1 so
we get events generated to userspace notifying applications of the change.
We are checking if there has been a change and exiting early if not but we
are not providing the correct return value in the latter case, fix this.

Fixes: af2618a2eee8 ("ASoC: meson: g12a: add internal DAC glue driver")
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240103-meson-enum-val-v1-3-424af7a8fb91@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: meson: g12a-tohdmitx: Validate written enum values

[ Upstream commit 1e001206804be3f3d21f4a1cf16e5d059d75643f ]

When writing to an enum we need to verify that the value written is valid
for the enumeration, the helper function snd_soc_item_enum_to_val() doesn't
do it since it needs to return an unsigned (and in any case we'd need to
check the return value).

Fixes: c8609f3870f7 ("ASoC: meson: add g12a tohdmitx control")
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240103-meson-enum-val-v1-2-424af7a8fb91@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: meson: g12a-toacodec: Validate written enum values

[ Upstream commit 3150b70e944ead909260285dfb5707d0bedcf87b ]

When writing to an enum we need to verify that the value written is valid
for the enumeration, the helper function snd_soc_item_enum_to_val() doesn't
do it since it needs to return an unsigned (and in any case we'd need to
check the return value).

Fixes: af2618a2eee8 ("ASoC: meson: g12a: add internal DAC glue driver")
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240103-meson-enum-val-v1-1-424af7a8fb91@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

i40e: fix use-after-free in i40e_aqc_add_filters()

[ Upstream commit 6a15584e99db8918b60e507539c7446375dcf366 ]

Commit 3116f59c12bd ("i40e: fix use-after-free in
i40e_sync_filters_subtask()") avoided use-after-free issues,
by increasing refcount during update the VSI filter list to
the HW. However, it missed the unicast situation.

When deleting an unicast FDB entry, the i40e driver will release
the mac_filter, and i40e_service_task will concurrently request
firmware to add the mac_filter, which will lead to the following
use-after-free issue.

Fix again for both netdev->uc and netdev->mc.

BUG: KASAN: use-after-free in i40e_aqc_add_filters+0x55c/0x5b0 [i40e]
Read of size 2 at addr ffff888eb3452d60 by task kworker/8:7/6379

CPU: 8 PID: 6379 Comm: kworker/8:7 Kdump: loaded Tainted: G
Workqueue: i40e i40e_service_task [i40e]
Call Trace:
dump_stack+0x71/0xab
print_address_description+0x6b/0x290
kasan_report+0x14a/0x2b0
i40e_aqc_add_filters+0x55c/0x5b0 [i40e]
i40e_sync_vsi_filters+0x1676/0x39c0 [i40e]
i40e_service_task+0x1397/0x2bb0 [i40e]
process_one_work+0x56a/0x11f0
worker_thread+0x8f/0xf40
kthread+0x2a0/0x390
ret_from_fork+0x1f/0x40

Allocated by task 21948:
kasan_kmalloc+0xa6/0xd0
kmem_cache_alloc_trace+0xdb/0x1c0
i40e_add_filter+0x11e/0x520 [i40e]
i40e_addr_sync+0x37/0x60 [i40e]
__hw_addr_sync_dev+0x1f5/0x2f0
i40e_set_rx_mode+0x61/0x1e0 [i40e]
dev_uc_add_excl+0x137/0x190
i40e_ndo_fdb_add+0x161/0x260 [i40e]
rtnl_fdb_add+0x567/0x950
rtnetlink_rcv_msg+0x5db/0x880
netlink_rcv_skb+0x254/0x380
netlink_unicast+0x454/0x610
netlink_sendmsg+0x747/0xb00
sock_sendmsg+0xe2/0x120
__sys_sendto+0x1ae/0x290
__x64_sys_sendto+0xdd/0x1b0
do_syscall_64+0xa0/0x370
entry_SYSCALL_64_after_hwframe+0x65/0xca

Freed by task 21948:
__kasan_slab_free+0x137/0x190
kfree+0x8b/0x1b0
__i40e_del_filter+0x116/0x1e0 [i40e]
i40e_del_mac_filter+0x16c/0x300 [i40e]
i40e_addr_unsync+0x134/0x1b0 [i40e]
__hw_addr_sync_dev+0xff/0x2f0
i40e_set_rx_mode+0x61/0x1e0 [i40e]
dev_uc_del+0x77/0x90
rtnl_fdb_del+0x6a5/0x860
rtnetlink_rcv_msg+0x5db/0x880
netlink_rcv_skb+0x254/0x380
netlink_unicast+0x454/0x610
netlink_sendmsg+0x747/0xb00
sock_sendmsg+0xe2/0x120
__sys_sendto+0x1ae/0x290
__x64_sys_sendto+0xdd/0x1b0
do_syscall_64+0xa0/0x370
entry_SYSCALL_64_after_hwframe+0x65/0xca

Fixes: 3116f59c12bd ("i40e: fix use-after-free in i40e_sync_filters_subtask()")
Fixes: 41c445ff0f48 ("i40e: main driver core")
Signed-off-by: Ke Xiao <xiaoke@sangfor.com.cn>
Signed-off-by: Ding Hui <dinghui@sangfor.com.cn>
Cc: Di Zhu <zhudi2@huawei.com>
Reviewed-by: Jan Sokolowski <jan.sokolowski@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: Save and restore msg_namelen in sock_sendmsg

[ Upstream commit 01b2885d9415152bcb12ff1f7788f500a74ea0ed ]

Commit 86a7e0b69bd5 ("net: prevent rewrite of msg_name in
sock_sendmsg()") made sock_sendmsg save the incoming msg_name pointer
and restore it before returning, to insulate the caller against
msg_name being changed by the called code. If the address length
was also changed however, we may return with an inconsistent structure
where the length doesn't match the address, and attempts to reuse it may
lead to lost packets.

For example, a kernel that doesn't have commit 1c5950fc6fe9 ("udp6: fix
potential access to stale information") will replace a v4 mapped address
with its ipv4 equivalent, and shorten namelen accordingly from 28 to 16.
If the caller attempts to reuse the resulting msg structure, it will have
the original ipv6 (v4 mapped) address but an incorrect v4 length.

Fixes: 86a7e0b69bd5 ("net: prevent rewrite of msg_name in sock_sendmsg()")
Signed-off-by: Marc Dionne <marc.dionne@auristor.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: nft_immediate: drop chain reference counter on error

[ Upstream commit b29be0ca8e816119ccdf95cc7d7c7be9bde005f1 ]

In the init path, nft_data_init() bumps the chain reference counter,
decrement it on error by following the error path which calls
nft_data_release() to restore it.

Fixes: 4bedf9eee016 ("netfilter: nf_tables: fix chain binding transaction logic")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: nf_nat: fix action not being set for all ct states

[ Upstream commit e6345d2824a3f58aab82428d11645e0da861ac13 ]

This fixes openvswitch's handling of nat packets in the related state.

In nf_ct_nat_execute(), which is called from nf_ct_nat(), ICMP/ICMPv6
packets in the IP_CT_RELATED or IP_CT_RELATED_REPLY state, which have
not been dropped, will follow the goto, however the placement of the
goto label means that updating the action bit field will be bypassed.

This causes ovs_nat_update_key() to not be called from ovs_ct_nat()
which means the openvswitch match key for the ICMP/ICMPv6 packet is not
updated and the pre-nat value will be retained for the key, which will
result in the wrong openflow rule being matched for that packet.

Move the goto label above where the action bit field is being set so
that it is updated in all cases where the packet is accepted.

Fixes: ebddb1404900 ("net: move the nat function to nf_nat_ovs for ovs and tc")
Signed-off-by: Brad Cowie <brad@faucet.nz>
Reviewed-by: Simon Horman <horms@kernel.org>
Acked-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Aaron Conole <aconole@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: bcmgenet: Fix FCS generation for fragmented skbuffs

[ Upstream commit e584f2ff1e6cc9b1d99e8a6b0f3415940d1b3eb3 ]

The flag DMA_TX_APPEND_CRC was only written to the first DMA descriptor
in the TX path, where each descriptor corresponds to a single skbuff
fragment (or the skbuff head). This led to packets with no FCS appearing
on the wire if the kernel allocated the packet in fragments, which would
always happen when using PACKET_MMAP/TPACKET (cf. tpacket_fill_skb() in
net/af_packet.c).

Fixes: 1c1008c793fa ("net: bcmgenet: add main driver file")
Signed-off-by: Adrian Cinal <adriancinal1@gmail.com>
Acked-by: Doug Berger <opendmb@gmail.com>
Acked-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20231228135638.1339245-1-adriancinal1@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

sfc: fix a double-free bug in efx_probe_filters

[ Upstream commit d5a306aedba34e640b11d7026dbbafb78ee3a5f6 ]

In efx_probe_filters, the channel->rps_flow_id is freed in a
efx_for_each_channel marco  when success equals to 0.
However, after the following call chain:

ef100_net_open
  |-> efx_probe_filters
  |-> ef100_net_stop
        |-> efx_remove_filters

The channel->rps_flow_id is freed again in the efx_for_each_channel of
efx_remove_filters, triggering a double-free bug.

Fixes: a9dc3d5612ce ("sfc_ef100: RX filter table management and related gubbins")
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: Zhipeng Lu <alexious@zju.edu.cn>
Link: https://lore.kernel.org/r/20231225112915.3544581-1-alexious@zju.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: sun9i: smp: Fix array-index-out-of-bounds read in sunxi_mc_smp_init

[ Upstream commit 72ad3b772b6d393701df58ba1359b0bb346a19ed ]

Running a multi-arch kernel (multi_v7_defconfig) on a Raspberry Pi 3B+
with enabled CONFIG_UBSAN triggers the following warning:

UBSAN: array-index-out-of-bounds in arch/arm/mach-sunxi/mc_smp.c:810:29
index 2 is out of range for type 'sunxi_mc_smp_data [2]'
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.7.0-rc6-00248-g5254c0cbc92d
Hardware name: BCM2835
  unwind_backtrace from show_stack+0x10/0x14
  show_stack from dump_stack_lvl+0x40/0x4c
  dump_stack_lvl from ubsan_epilogue+0x8/0x34
  ubsan_epilogue from __ubsan_handle_out_of_bounds+0x78/0x80
  __ubsan_handle_out_of_bounds from sunxi_mc_smp_init+0xe4/0x4cc
  sunxi_mc_smp_init from do_one_initcall+0xa0/0x2fc
  do_one_initcall from kernel_init_freeable+0xf4/0x2f4
  kernel_init_freeable from kernel_init+0x18/0x158
  kernel_init from ret_from_fork+0x14/0x28

Since the enabled method couldn't match with any entry from
sunxi_mc_smp_data, the value of the index shouldn't be used right after
the loop. So move it after the check of ret in order to have a valid
index.

Fixes: 1631090e34f5 ("ARM: sun9i: smp: Add is_a83t field")
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://lore.kernel.org/r/20231228193903.9078-1-wahrenst@gmx.net
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests: bonding: do not set port down when adding to bond

[ Upstream commit 61fa2493ca76fd7bb74e13f0205274f4ab0aa696 ]

Similar to commit be809424659c ("selftests: bonding: do not set port down
before adding to bond"). The bond-arp-interval-causes-panic test failed
after commit a4abfa627c38 ("net: rtnetlink: Enslave device before bringing
it up") as the kernel will set the port down _after_ adding to bond if setting
port down specifically.

Fix it by removing the link down operation when adding to bond.

Fixes: 2ffd57327ff1 ("selftests: bonding: cause oops in bond_rr_gen_slave_id")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Tested-by: Benjamin Poirier <benjamin.poirier@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: Implement missing getsockopt(SO_TIMESTAMPING_NEW)

[ Upstream commit 7f6ca95d16b96567ce4cf458a2790ff17fa620c3 ]

Commit 9718475e6908 ("socket: Add SO_TIMESTAMPING_NEW") added the new
socket option SO_TIMESTAMPING_NEW. Setting the option is handled in
sk_setsockopt(), querying it was not handled in sk_getsockopt(), though.

Following remarks on an earlier submission of this patch, keep the old
behavior of getsockopt(SO_TIMESTAMPING_OLD) which returns the active
flags even if they actually have been set through SO_TIMESTAMPING_NEW.

The new getsockopt(SO_TIMESTAMPING_NEW) is stricter, returning flags
only if they have been set through the same option.

Fixes: 9718475e6908 ("socket: Add SO_TIMESTAMPING_NEW")
Link: https://lore.kernel.org/lkml/20230703175048.151683-1-jthinz@mailbox.tu-berlin.de/
Link: https://lore.kernel.org/netdev/0d7cddc9-03fa-43db-a579-14f3e822615b@app.fastmail.com/
Signed-off-by: Jörn-Thorben Hinz <jthinz@mailbox.tu-berlin.de>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

r8169: Fix PCI error on system resume

[ Upstream commit 9c476269bff2908a20930c58085bf0b05ebd569a ]

Some r8168 NICs stop working upon system resume:

[  688.051096] r8169 0000:02:00.1 enp2s0f1: rtl_ep_ocp_read_cond == 0 (loop: 10, delay: 10000).
[  688.175131] r8169 0000:02:00.1 enp2s0f1: Link is Down
...
[  691.534611] r8169 0000:02:00.1 enp2s0f1: PCI error (cmd = 0x0407, status_errs = 0x0000)

Not sure if it's related, but those NICs have a BMC device at function
0:
02:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. Realtek RealManage BMC [10ec:816e] (rev 1a)

Trial and error shows that increase the loop wait on
rtl_ep_ocp_read_cond to 30 can eliminate the issue, so let
rtl8168ep_driver_start() to wait a bit longer.

Fixes: e6d6ca6e1204 ("r8169: Add support for another RTL8168FP")
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: sched: em_text: fix possible memory leak in em_text_destroy()

[ Upstream commit 8fcb0382af6f1ef50936f1be05b8149eb2f88496 ]

m->data needs to be freed when em_text_destroy is called.

Fixes: d675c989ed2d ("[PKT_SCHED]: Packet classification based on textsearch (ematch)")
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mlxbf_gige: fix receive packet race condition

[ Upstream commit dcea1bd45e6d111cc8fc1aaefa7e31694089bda3 ]

Under heavy traffic, the BlueField Gigabit interface can
become unresponsive. This is due to a possible race condition
in the mlxbf_gige_rx_packet function, where the function exits
with producer and consumer indices equal but there are remaining
packet(s) to be processed. In order to prevent this situation,
read receive consumer index *before* the HW replenish so that
the mlxbf_gige_rx_packet function returns an accurate return
value even if a packet is received into just-replenished buffer
prior to exiting this routine. If the just-replenished buffer
is received and occupies the last RX ring entry, the interface
would not recover and instead would encounter RX packet drops
related to internal buffer shortages since the driver RX logic
is not being triggered to drain the RX ring. This patch will
address and prevent this "ring full" condition.

Fixes: f92e1869d74e ("Add Mellanox BlueField Gigabit Ethernet driver")
Reviewed-by: Asmaa Mnebhi <asmaa@nvidia.com>
Signed-off-by: David Thompson <davthompson@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: mediatek: mt8186: fix AUD_PAD_TOP register and offset

[ Upstream commit 38744c3fa00109c51076121c2deb4f02e2f09194 ]

AUD_PAD_TOP widget's correct register is AFE_AUD_PAD_TOP , and not zero.
Having a zero as register, it would mean that the `snd_soc_dapm_new_widgets`
would try to read the register at offset zero when trying to get the power
status of this widget, which is incorrect.

Fixes: b65c466220b3 ("ASoC: mediatek: mt8186: support adda in platform driver")
Signed-off-by: Eugen Hristev <eugen.hristev@collabora.com>
Link: https://lore.kernel.org/r/20231229114342.195867-1-eugen.hristev@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: fsl_rpmsg: Fix error handler with pm_runtime_enable

[ Upstream commit f9d378fc68c43fd41b35133edec9cd902ec334ec ]

There is error message when defer probe happens:

fsl_rpmsg rpmsg_audio: Unbalanced pm_runtime_enable!

Fix the error handler with pm_runtime_enable.

Fixes: b73d9e6225e8 ("ASoC: fsl_rpmsg: Add CPU DAI driver for audio base on rpmsg")
Signed-off-by: Chancel Liu <chancel.liu@nxp.com>
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Link: https://lore.kernel.org/r/20231225080608.967953-1-chancel.liu@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

igc: Check VLAN EtherType mask

[ Upstream commit 7afd49a38e73afd57ff62c8d1cf5af760c4d49c0 ]

Currently the driver accepts VLAN EtherType steering rules regardless of
the configured mask. And things might fail silently or with confusing error
messages to the user. The VLAN EtherType can only be matched by full
mask. Therefore, add a check for that.

For instance the following rule is invalid, but the driver accepts it and
ignores the user specified mask:
|root@host:~# ethtool -N enp3s0 flow-type ether vlan-etype 0x8100 \
|             m 0x00ff action 0
|Added rule with ID 63
|root@host:~# ethtool --show-ntuple enp3s0
|4 RX rings available
|Total 1 rules
|
|Filter: 63
|        Flow Type: Raw Ethernet
|        Src MAC addr: 00:00:00:00:00:00 mask: FF:FF:FF:FF:FF:FF
|        Dest MAC addr: 00:00:00:00:00:00 mask: FF:FF:FF:FF:FF:FF
|        Ethertype: 0x0 mask: 0xFFFF
|        VLAN EtherType: 0x8100 mask: 0x0
|        VLAN: 0x0 mask: 0xffff
|        User-defined: 0x0 mask: 0xffffffffffffffff
|        Action: Direct to queue 0

After:
|root@host:~# ethtool -N enp3s0 flow-type ether vlan-etype 0x8100 \
|             m 0x00ff action 0
|rmgr: Cannot insert RX class rule: Operation not supported

Fixes: 2b477d057e33 ("igc: Integrate flex filter into ethtool ops")
Suggested-by: Suman Ghosh <sumang@marvell.com>
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

igc: Check VLAN TCI mask

[ Upstream commit b5063cbe148b829e8eb97672c2cbccc058835476 ]

Currently the driver accepts VLAN TCI steering rules regardless of the
configured mask. And things might fail silently or with confusing error
messages to the user.

There are two ways to handle the VLAN TCI mask:

1. Match on the PCP field using a VLAN prio filter
2. Match on complete TCI field using a flex filter

Therefore, add checks and code for that.

For instance the following rule is invalid and will be converted into a
VLAN prio rule which is not correct:
|root@host:~# ethtool -N enp3s0 flow-type ether vlan 0x0001 m 0xf000 \
|             action 1
|Added rule with ID 61
|root@host:~# ethtool --show-ntuple enp3s0
|4 RX rings available
|Total 1 rules
|
|Filter: 61
|        Flow Type: Raw Ethernet
|        Src MAC addr: 00:00:00:00:00:00 mask: FF:FF:FF:FF:FF:FF
|        Dest MAC addr: 00:00:00:00:00:00 mask: FF:FF:FF:FF:FF:FF
|        Ethertype: 0x0 mask: 0xFFFF
|        VLAN EtherType: 0x0 mask: 0xffff
|        VLAN: 0x1 mask: 0x1fff
|        User-defined: 0x0 mask: 0xffffffffffffffff
|        Action: Direct to queue 1

After:
|root@host:~# ethtool -N enp3s0 flow-type ether vlan 0x0001 m 0xf000 \
|             action 1
|rmgr: Cannot insert RX class rule: Operation not supported

Fixes: 7991487ecb2d ("igc: Allow for Flex Filters to be installed")
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

igc: Report VLAN EtherType matching back to user

[ Upstream commit 088464abd48cf3735aee91f9e211b32da9d81117 ]

Currently the driver allows to configure matching by VLAN EtherType.
However, the retrieval function does not report it back to the user. Add
it.

Before:
|root@host:~# ethtool -N enp3s0 flow-type ether vlan-etype 0x8100 action 0
|Added rule with ID 63
|root@host:~# ethtool --show-ntuple enp3s0
|4 RX rings available
|Total 1 rules
|
|Filter: 63
|        Flow Type: Raw Ethernet
|        Src MAC addr: 00:00:00:00:00:00 mask: FF:FF:FF:FF:FF:FF
|        Dest MAC addr: 00:00:00:00:00:00 mask: FF:FF:FF:FF:FF:FF
|        Ethertype: 0x0 mask: 0xFFFF
|        Action: Direct to queue 0

After:
|root@host:~# ethtool -N enp3s0 flow-type ether vlan-etype 0x8100 action 0
|Added rule with ID 63
|root@host:~# ethtool --show-ntuple enp3s0
|4 RX rings available
|Total 1 rules
|
|Filter: 63
|        Flow Type: Raw Ethernet
|        Src MAC addr: 00:00:00:00:00:00 mask: FF:FF:FF:FF:FF:FF
|        Dest MAC addr: 00:00:00:00:00:00 mask: FF:FF:FF:FF:FF:FF
|        Ethertype: 0x0 mask: 0xFFFF
|        VLAN EtherType: 0x8100 mask: 0x0
|        VLAN: 0x0 mask: 0xffff
|        User-defined: 0x0 mask: 0xffffffffffffffff
|        Action: Direct to queue 0

Fixes: 2b477d057e33 ("igc: Integrate flex filter into ethtool ops")
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

i40e: Fix filter input checks to prevent config with invalid values

[ Upstream commit 3e48041d9820c17e0a51599d12e66c6e12a8d08d ]

Prevent VF from configuring filters with unsupported actions or use
REDIRECT action with invalid tc number. Current checks could cause
out of bounds access on PF side.

Fixes: e284fc280473 ("i40e: Add and delete cloud filter")
Reviewed-by: Andrii Staikov <andrii.staikov@intel.com>
Signed-off-by: Sudheer Mogilappagari <sudheer.mogilappagari@intel.com>
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Bharathi Sreenivas <bharathi.sreenivas@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ice: Shut down VSI with "link-down-on-close" enabled

[ Upstream commit 6d05ff55ef4f4954d28551236239f297bd52ea48 ]

Disabling netdev with ethtool private flag "link-down-on-close" enabled
can cause NULL pointer dereference bug. Shut down VSI regardless of
"link-down-on-close" state.

Fixes: 8ac7132704f3 ("ice: Fix interface being down after reset with link-down-on-close flag on")
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Ngai-Mint Kwan <ngai-mint.kwan@intel.com>
Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ice: Fix link_down_on_close message

[ Upstream commit 6a8d8bb55e7001de2d50920381cc858f3a3e9fb7 ]

The driver should not report an error message when for a medialess port
the link_down_on_close flag is enabled and the physical link cannot be
set down.

Fixes: 8ac7132704f3 ("ice: Fix interface being down after reset with link-down-on-close flag on")
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Katarzyna Wieczerzycka <katarzyna.wieczerzycka@intel.com>
Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/i915/perf: Update handling of MMIO triggered reports

[ Upstream commit ee11d2d37f5c05bd7bf5ccc820a58f48423d032b ]

On XEHP platforms user is not able to find MMIO triggered reports in the
OA buffer since i915 squashes the context ID fields. These context ID
fields hold the MMIO trigger markers.

Update logic to not squash the context ID fields of MMIO triggered
reports.

Fixes: cba94bbcff08 ("drm/i915/perf: Determine context valid in OA reports")
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231219000543.1087706-1-umesh.nerlige.ramappa@intel.com
(cherry picked from commit 0c68132df6e66244acec1bb5b9e19b0751414389)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/i915/dp: Fix passing the correct DPCD_REV for drm_dp_set_phy_test_pattern

[ Upstream commit 2bd7a06a1208aaacb4e7a2a5436c23bce8d70801 ]

Using link_status to get DPCD_REV fails when disabling/defaulting
phy pattern. Use intel_dp->dpcd to access DPCD_REV correctly.

Fixes: 8cdf72711928 ("drm/i915/dp: Program vswing, pre-emphasis, test-pattern")
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Lee Shawn C <shawn.c.lee@intel.com>
Signed-off-by: Khaled Almahallawy <khaled.almahallawy@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231213211542.3585105-3-khaled.almahallawy@intel.com
(cherry picked from commit 3ee302ec22d6e1d7d1e6d381b0d507ee80f2135c)
Signed-off-by: Sasha Levin <sashal@kernel.org>

octeontx2-af: Fix marking couple of structure as __packed

[ Upstream commit 0ee2384a5a0f3b4eeac8d10bb01a0609d245a4d1 ]

Couple of structures was not marked as __packed. This patch
fixes the same and mark them as __packed.

Fixes: 42006910b5ea ("octeontx2-af: cleanup KPU config data")
Signed-off-by: Suman Ghosh <sumang@marvell.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nfc: llcp_core: Hold a ref to llcp_local->dev when holding a ref to llcp_local

[ Upstream commit c95f919567d6f1914f13350af61a1b044ac85014 ]

llcp_sock_sendmsg() calls nfc_llcp_send_ui_frame() which in turn calls
nfc_alloc_send_skb(), which accesses the nfc_dev from the llcp_sock for
getting the headroom and tailroom needed for skb allocation.

Parallelly the nfc_dev can be freed, as the refcount is decreased via
nfc_free_device(), leading to a UAF reported by Syzkaller, which can
be summarized as follows:

(1) llcp_sock_sendmsg() -> nfc_llcp_send_ui_frame()
-> nfc_alloc_send_skb() -> Dereference *nfc_dev
(2) virtual_ncidev_close() -> nci_free_device() -> nfc_free_device()
-> put_device() -> nfc_release() -> Free *nfc_dev

When a reference to llcp_local is acquired, we do not acquire the same
for the nfc_dev. This leads to freeing even when the llcp_local is in
use, and this is the case with the UAF described above too.

Thus, when we acquire a reference to llcp_local, we should acquire a
reference to nfc_dev, and release the references appropriately later.

References for llcp_local is initialized in nfc_llcp_register_device()
(which is called by nfc_register_device()). Thus, we should acquire a
reference to nfc_dev there.

nfc_unregister_device() calls nfc_llcp_unregister_device() which in
turn calls nfc_llcp_local_put(). Thus, the reference to nfc_dev is
appropriately released later.

Reported-and-tested-by: syzbot+bbe84a4010eeea00982d@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=bbe84a4010eeea00982d
Fixes: c7aa12252f51 ("NFC: Take a reference on the LLCP local pointer when creating a socket")
Reviewed-by: Suman Ghosh <sumang@marvell.com>
Signed-off-by: Siddh Raman Pant <code@siddh.me>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: nf_tables: set transport offset from mac header for netdev/egress

[ Upstream commit 0ae8e4cca78781401b17721bfb72718fdf7b4912 ]

Before this patch, transport offset (pkt->thoff) provides an offset
relative to the network header. This is fine for the inet families
because skb->data points to the network header in such case. However,
from netdev/egress, skb->data points to the mac header (if available),
thus, pkt->thoff is missing the mac header length.

Add skb_network_offset() to the transport offset (pkt->thoff) for
netdev, so transport header mangling works as expected. Adjust payload
fast eval function to use skb->data now that pkt->thoff provides an
absolute offset. This explains why users report that matching on
egress/netdev works but payload mangling does not.

This patch implicitly fixes payload mangling for IPv4 packets in
netdev/egress given skb_store_bits() requires an offset from skb->data
to reach the transport header.

I suspect that nft_exthdr and the trace infra were also broken from
netdev/egress because they also take skb->data as start, and pkt->thoff
was not correct.

Note that IPv6 is fine because ipv6_find_hdr() already provides a
transport offset starting from skb->data, which includes
skb_network_offset().

The bridge family also uses nft_set_pktinfo_ipv4_validate(), but there
skb_network_offset() is zero, so the update in this patch does not alter
the existing behaviour.

Fixes: 42df6e1d221d ("netfilter: Introduce egress hook")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/bridge: ps8640: Fix size mismatch warning w/ len

[ Upstream commit 35ba6bd582cf926a082296b7e9a876ec81136cb1 ]

After commit 26195af57798 ("drm/bridge: ps8640: Drop the ability of
ps8640 to fetch the EDID"), I got an error compiling:

  error: comparison of distinct pointer types
  ('typeof (len) *' (aka 'unsigned int *') and
   'typeof (msg->size) *' (aka 'unsigned long *'))
  [-Werror,-Wcompare-distinct-pointer-types]

Fix it by declaring the `len` as size_t.

The above error only shows up on downstream kernels without commit
d03eba99f5bf ("minmax: allow min()/max()/clamp() if the arguments have
the same signedness."), but since commit 26195af57798 ("drm/bridge:
ps8640: Drop the ability of ps8640 to fetch the EDID") is a "Fix" that
will likely be backported it seems nice to make it easy. ...plus it's
more correct to declare `len` as size_t anyway.

Fixes: 26195af57798 ("drm/bridge: ps8640: Drop the ability of ps8640 to fetch the EDID")
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231218090454.1.I5c6eb80b2f746439c4b58efab788e00701d08759@changeid
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/bridge: ti-sn65dsi86: Never store more than msg->size bytes in AUX xfer

[ Upstream commit aca58eac52b88138ab98c814afb389a381725cd7 ]

For aux reads, the value `msg->size` indicates the size of the buffer
provided by `msg->buffer`. We should never in any circumstances write
more bytes to the buffer since it may overflow the buffer.

In the ti-sn65dsi86 driver there is one code path that reads the
transfer length from hardware. Even though it's never been seen to be
a problem, we should make extra sure that the hardware isn't
increasing the length since doing so would cause us to overrun the
buffer.

Fixes: 982f589bde7a ("drm/bridge: ti-sn65dsi86: Update reply on aux failures")
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231214123752.v3.2.I7b83c0f31aeedc6b1dc98c7c741d3e1f94f040f8@changeid
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/bridge: parade-ps8640: Never store more than msg->size bytes in AUX xfer

[ Upstream commit 3164c8a70073d43629b4e11e083d3d2798f7750f ]

While testing, I happened to notice a random crash that looked like:

Kernel panic - not syncing: stack-protector:
Kernel stack is corrupted in: drm_dp_dpcd_probe+0x120/0x120

Analysis of drm_dp_dpcd_probe() shows that we pass in a 1-byte buffer
(allocated on the stack) to the aux->transfer() function. Presumably
if the aux->transfer() writes more than one byte to this buffer then
we're in a bad shape.

Dropping into kgdb, I noticed that "aux->transfer" pointed at
ps8640_aux_transfer().

Reading through ps8640_aux_transfer(), I can see that there are cases
where it could write more bytes to msg->buffer than were specified by
msg->size. This could happen if the hardware reported back something
bogus to us. Let's fix this so we never write more than msg->size
bytes. We'll still read all the bytes from the hardware just in case
the hardware requires it since the aux transfer data comes through an
auto-incrementing register.

NOTE: I have no actual way to reproduce this issue but it seems likely
this is what was happening in the crash I looked at.

Fixes: 13afcdd7277e ("drm/bridge: parade-ps8640: Add support for AUX channel")
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20231214123752.v3.1.I9d1afcaad76a3e2c0ca046dc4adbc2b632c22eda@changeid
Signed-off-by: Sasha Levin <sashal@kernel.org>

wifi: iwlwifi: pcie: don't synchronize IRQs from IRQ

[ Upstream commit 400f6ebbc175286576c7f7fddf3c347d09d12310 ]

On older devices (before unified image!) we can end up calling
stop_device from an rfkill interrupt. However, in stop_device
we attempt to synchronize IRQs, which then of course deadlocks.

Avoid this by checking the context, if running from the IRQ
thread then don't synchronize. This wouldn't be correct on a
new device since RSS is supported, but older devices only have
a single interrupt/queue.

Fixes: 37fb29bd1f90 ("wifi: iwlwifi: pcie: synchronize IRQs before NAPI")
Reviewed-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20231215111335.59aab00baed7.Iadfe154d6248e7f9dfd69522e5429dbbd72925d7@changeid
Signed-off-by: Sasha Levin <sashal@kernel.org>

accel/qaic: Implement quirk for SOC_HW_VERSION

[ Upstream commit 4c8874c2a6512b9fe7285cab1a6910d9211a6cfb ]

The SOC_HW_VERSION register in the BHI space is not correctly initialized
by the device and in many cases contains uninitialized data. The register
could contain 0xFFFFFFFF which is a special value to indicate a link
error in PCIe, therefore if observed, we could incorrectly think the
device is down.

Intercept reads for this register, and provide the correct value - every
production instance would read 0x60110200 if the device was operating as
intended.

Fixes: a36bf7af868b ("accel/qaic: Add MHI controller")
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231208163101.1295769-3-quic_jhugo@quicinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

accel/qaic: Fix GEM import path code

[ Upstream commit c8b6f4ad2ff9c6d88cdeb9acf16d0c4a323dd499 ]

Do not modify the size of dmabuf as it is immutable.

Fixes: ff13be830333 ("accel/qaic: Add datapath")
Signed-off-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231208163101.1295769-2-quic_jhugo@quicinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

KVM: x86/pmu: fix masking logic for MSR_CORE_PERF_GLOBAL_CTRL

commit 971079464001c6856186ca137778e534d983174a upstream.

When commit c59a1f106f5c ("KVM: x86/pmu: Add IA32_PEBS_ENABLE
MSR emulation for extended PEBS") switched the initialization of
cpuc->guest_switch_msrs to use compound literals, it screwed up
the boolean logic:

+ u64 pebs_mask = cpuc->pebs_enabled & x86_pmu.pebs_capable;
...
- arr[0].guest = intel_ctrl & ~cpuc->intel_ctrl_host_mask;
- arr[0].guest &= ~(cpuc->pebs_enabled & x86_pmu.pebs_capable);
+               .guest = intel_ctrl & (~cpuc->intel_ctrl_host_mask | ~pebs_mask),

Before the patch, the value of arr[0].guest would have been intel_ctrl &
~cpuc->intel_ctrl_host_mask & ~pebs_mask.  The intent is to always treat
PEBS events as host-only because, while the guest runs, there is no way
to tell the processor about the virtual address where to put PEBS records
intended for the host.

Unfortunately, the new expression can be expanded to

(intel_ctrl & ~cpuc->intel_ctrl_host_mask) | (intel_ctrl & ~pebs_mask)

which makes no sense; it includes any bit that isn't *both* marked as
exclude_guest and using PEBS.  So, reinstate the old logic.  Another
way to write it could be "intel_ctrl & ~(cpuc->intel_ctrl_host_mask |
pebs_mask)", presumably the intention of the author of the faulty.
However, I personally find the repeated application of A AND NOT B to
be a bit more readable.

This shows up as guest failures when running concurrent long-running
perf workloads on the host, and was reported to happen with rcutorture.
All guests on a given host would die simultaneously with something like an
instruction fault or a segmentation violation.

Reported-by: Paul E. McKenney <paulmck@kernel.org>
Analyzed-by: Sean Christopherson <seanjc@google.com>
Tested-by: Paul E. McKenney <paulmck@kernel.org>
Cc: stable@vger.kernel.org
Fixes: c59a1f106f5c ("KVM: x86/pmu: Add IA32_PEBS_ENABLE MSR emulation for extended PEBS")
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cifs: do not depend on release_iface for maintaining iface_list

commit 09eeb0723f219fbd96d8865bf9b935e03ee2ec22 upstream.

parse_server_interfaces should be in complete charge of maintaining
the iface_list linked list. Today, iface entries are removed
from the list only when the last refcount is dropped.
i.e. in release_iface. However, this can result in undercounting
of refcount if the server stops advertising interfaces (which
Azure SMB server does).

This change puts parse_server_interfaces in full charge of
maintaining the iface_list. So if an empty list is returned
by the server, the entries in the list will immediately be
removed. This way, a following call to the same function will
not find entries in the list.

Fixes: aa45dadd34e4 ("cifs: change iface_list from array to sorted linked list")
Cc: stable@vger.kernel.org
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cifs: cifs_chan_is_iface_active should be called with chan_lock held

commit 7257bcf3bdc785eabc4eef1f329a59815b032508 upstream.

cifs_chan_is_iface_active checks the channels of a session to see
if the associated iface is active. This should always happen
with chan_lock held. However, these two callers of this function
were missing this locking.

This change makes sure the function calls are protected with
proper locking.

Fixes: b54034a73baf ("cifs: during reconnect, update interface if necessary")
Fixes: fa1d0508bdd4 ("cifs: account for primary channel in the interface list")
Cc: stable@vger.kernel.org
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/mgag200: Fix gamma lut not initialized for G200ER, G200EV, G200SE

commit 11f9eb899ecc8c02b769cf8d2532ba12786a7af7 upstream.

When mgag200 switched from simple KMS to regular atomic helpers,
the initialization of the gamma settings was lost.
This leads to a black screen, if the bios/uefi doesn't use the same
pixel color depth.
This has been fixed with commit ad81e23426a6 ("drm/mgag200: Fix gamma
lut not initialized.") for most G200, but G200ER, G200EV, G200SE use
their own version of crtc_helper_atomic_enable() and need to be fixed
too.

Fixes: 1baf9127c482 ("drm/mgag200: Replace simple-KMS with regular atomic helpers")
Cc: <stable@vger.kernel.org> #v6.1+
Reported-by: Roger Sewell <roger.sewell@cantab.net>
Suggested-by: Roger Sewell <roger.sewell@cantab.net>
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231214163849.359691-1-jfalempe@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "PCI/ASPM: Remove pcie_aspm_pm_state_change()"

commit f93e71aea6c60ebff8adbd8941e678302d377869 upstream.

This reverts commit 08d0cc5f34265d1a1e3031f319f594bd1970976c.

Michael reported that when attempting to resume from suspend to RAM on ASUS
mini PC PN51-BB757MDE1 (DMI model: MINIPC PN51-E1), 08d0cc5f3426
("PCI/ASPM: Remove pcie_aspm_pm_state_change()") caused a 12-second delay
with no output, followed by a reboot.

Workarounds include:

  - Reverting 08d0cc5f3426 ("PCI/ASPM: Remove pcie_aspm_pm_state_change()")
  - Booting with "pcie_aspm=off"
  - Booting with "pcie_aspm.policy=performance"
  - "echo 0 | sudo tee /sys/bus/pci/devices/0000:03:00.0/link/l1_aspm"
    before suspending
  - Connecting a USB flash drive

Link: https://lore.kernel.org/r/20240102232550.1751655-1-helgaas@kernel.org
Fixes: 08d0cc5f3426 ("PCI/ASPM: Remove pcie_aspm_pm_state_change()")
Reported-by: Michael Schaller <michael@5challer.de>
Link: https://lore.kernel.org/r/76c61361-b8b4-435f-a9f1-32b716763d62@5challer.de
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mptcp: prevent tcp diag from closing listener subflows

commit 4c0288299fd09ee7c6fbe2f57421f314d8c981db upstream.

The MPTCP protocol does not expect that any other entity could change
the first subflow status when such socket is listening.
Unfortunately the TCP diag interface allows aborting any TCP socket,
including MPTCP listeners subflows. As reported by syzbot, that trigger
a WARN() and could lead to later bigger trouble.

The MPTCP protocol needs to do some MPTCP-level cleanup actions to
properly shutdown the listener. To keep the fix simple, prevent
entirely the diag interface from stopping such listeners.

We could refine the diag callback in a later, larger patch targeting
net-next.

Fixes: 57fc0f1ceaa4 ("mptcp: ensure listener is unhashed before updating the sk status")
Cc: stable@vger.kernel.org
Reported-by: <syzbot+5a01c3a666e726bc8752@syzkaller.appspotmail.com>
Closes: https://lore.kernel.org/netdev/0000000000004f4579060c68431b@google.com/
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20231226-upstream-net-20231226-mptcp-prevent-warn-v1-2-1404dcc431ea@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amd/display: pbn_div need be updated for hotplug event

commit 9cdef4f720376ef0fb0febce1ed2377c19e531f9 upstream.

link_rate sometime will be changed when DP MST connector hotplug, so
pbn_div also need be updated; otherwise, it will mismatch with
link_rate, causes no output in external monitor.

This is a backport to 6.7 and older.

Cc: stable@vger.kernel.org
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Jerry Zuo <jerry.zuo@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Wade Wang <wade.wang@hp.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek: Fix mute and mic-mute LEDs for HP ProBook 440 G6

commit b6ce6e6c79e4ec650887f1fe391a70e54972001a upstream.

LEDs in 'HP ProBook 440 G6' laptop are controlled by ALC236 codec.
Enable already existing quirk 'ALC236_FIXUP_HP_MUTE_LED_MICMUTE_VREF'
to fix mute and mic-mute LEDs.

Signed-off-by: Siddhesh Dharme <siddheshdharme18@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20240104060736.5149-1-siddheshdharme18@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>